ZENITH E battery zero-turn

BATTERY BENEFITS, PETROL PERFORMANCE.

Ariens zero-turn mowers are built for the toughest commercial environments and the ZENITH E is no exception. Next generation battery technology has been combined with the proven performance of the commercial grade Ariens ZENITH to provide landscapers with lower operating costs, improved profitability and access to low-noise, low emission contracts.

MODEL OVERVIEW

DESIGNATION ZENITH E 48 ZENITH E 48R ZENITH E 52 ZENITH E 52R ZENITH E 60 ZENITH E 60R

BATTERY TYPE Lithium-ion Lithium-ion Lithium-ion Lithium-ion Lithium-ion Lithium-ion

CUTTING WIDTH 122cm (48") 122cm (48") 132cm (52") 132cm (52") 152cm (60") 152cm (60")

DECK TYPE Side discharge Rear discharge Side discharge Rear discharge Side discharge Rear discharge

GROUND SPEED (FWD/REV) 17.7kph / 8.9kph (11mph / 5.5mph) 17.7kph / 8.9kph (11mph / 5.5mph) 17.7kph / 8.9kph (11mph / 5.5mph) 17.7kph / 8.9kph (11mph / 5.5mph) 17.7kph / 8.9kph (11mph / 5.5mph) 17.7kph / 8.9kph (11mph / 5.5mph)

POWERED BY FUSIONCORE 4x interchangeable Lithium-ion, sealed for life 56V batteries with 4kWh capacity – will drive on just one pack, and cut on two.

PROPRIETARY ELECTRIC TRANSAXLES Provides the same feel as a petrol commercial zero-turn. Brushless electric drive motor coupled with dual reduction planetary gearbox.

X-FACTOR ® III DECK Completely redesigned deck providing better grass dispersion through improved air flow while reducing noise pollution. Constructed from 7-gauge steel to deliver years of solid performance.

INTELLIGENT LOAD BALANCING Battery management system will draw power from fully charged batteries first, then draw equally from all four units.

ONBOARD CHARGING Charge batteries whilst in the ZENITH E. Comes with a standard 12 hour smart charger. Options include a 5.3 hour onboard speed charger and two offboard chargers (12 or 5.3 hour).

REAR DISCHARGE DECK Cut grass is ejected in neat rows behind the zero-turn. Eliminates blowout of clippings into paths and roads

SPINDLE PROTECTION Patent-pending spindle is designed to absorb massive impact. Spindle is protected should the blade impact an immovable object.

BLADE SLIP FEATURE Prevents damage to the motor by limiting the impulse torque transferred to the spindle shaft should the blade strike the ground or a solid object.

OFF-BOARD CHARGING Charge extra batteries outside of the main unit with the FusionCore, off-board portable charger, ensuring you've got the power to perform wherever the job takes you.