1 minute read
CONTENT – FACILITIES – FABRICATION LABS
Casting lab
Contact: Kasper Kronstrand
Telephone: 89360316
Email: krj@aarch.dk
In the casting lab and the area located next to it, you can work with concrete and plaster casting. These materials require special sewer conditions. At the school, you are consequently only allowed to work with these materials in this area, and it is essential that the room and equipment are handed over completely cleaned after use.
Dust from gypsum and concrete is harmful to your health if inhaled. We therefore recommend you always use dust masks when handling powdered materials.
3D printing lab
Contact: Jakob Sieder-Semlitsch
Telephone: 89360339
Email: jss@aarch.dk
The school disposes of several different types of 3D printers, located together in a workshop on the second floor. Here you will find an EOS 3D printer for items that require particularly high quality in terms of surface and material strength. Several small 3D printers have also been installed in the three model workshops.
Spray room
Contact: Kasper Kronstrand
Telephone: 89360316
Email: krj@aarch.dk
A special room at the school has been arranged for working with spray paint and spray adhesives. A wall with strong exhaust ventilation makes it possible to work with these products in an environmentally sound manner. Working with spray paints and spray adhesives is only permitted in this room.
CONTENT – FACILITIES – CANTEEN
The Canteen is where students and employees meet and eat together.
The canteen serves meals at affordable prices - prepared using good and often organic ingredients.
