ACCESSORIES
44
ACCESSORIES Metal mailboxes can be delivered by single units or banked (except model FUTURE V1000). Whenever delivered as single units, the price is marked near the mailbox. Whenever delivered as bank of mailboxes, there will be an extra charge indicated in the JOINED MAILBOXES section, except the cases where metallic SURROUNDS or FRAMES accessories are selected. Wooden mailboxes are always supplied in banks of mailboxes with no extra charge. There is also option of individual mailboxes upon request. Below, we present several available accessories for banked mailboxes. COLOUR OPTIONS
ENGRAVING MAILBOXES AND NAME PLATES
BANK NAME PLATE
Name plates can be incorporated to the bank of mailboxes to identify the block of houses.
PARCEL SHELVES
NOTICE BOARDS
INTERCOM SYSTEM BOX
Made up in the bank of mailboxes, they allow to leave flyers on them.
Made up in the bank of mailboxes, this notice board is a very practical way of advertising or noticing.
Made up in the bank of mailboxes, this box is prepared to install the Intercom system.
FRAMES
SURROUNDS
SUPPORTS
When the bank is built in the wall, this is the best accessory to leave the bank flush with the wall.
If the bank of mailboxes is not built in the wall a surronding around the bank gives a better appearance to the sides and top of the mailboxes. If the rear is visible, a piece can be added to cover it.
Base suports, side supports, wall-fixed supports‌ of different materials and with matching finishes to suit the mailboxes.
TABLE
ROOF
SHELTER
An elegant and useful accessory as support for mailboxes groups. Practical and decorative, fills any environment with style.
When the mailboxes are installed outside, exposed to inclement weather, the roof protects the mailboxes.
When the mailboxes are installed outside, exposed to inclement weather, the shelter protects the mailboxes as well as the individuals when picking the mail.
ACCESSORIES
Customize the finish of your mailbox. You will find a full range of Arregui RAL colours.
Customize your mailbox numbering and lettering mailbox flaps or doors with laser engraving. Name cards can be customized by engraving the desired text; usually the owner’s name.
45
ACCESSORIES JOINED MAILBOXES Metallic Mailboxes can be joined in a bank with an additional charge, except the cases where metallic surrounds or frames accessories are selected.
CHARACTERISTICS
COLOURS
All the range of ARREGUI’s metal mailboxes may be powder coated in any finish of customer’s choice, from our colour chart shown in this page. Due to the limitations of the printing process, colour match must be checked against the official RAL Colour Chart. This is only intended to be a reference guide.
EXTRAS Also, any RAL finish from the Official RAL Colour Chart is available upon request.
The Arregui’s colours range possesses a smooth and bright finish on the product, except for those colours otherwise indicated.
White: RAL 9016
Orange: RAL 2004
Red: RAL 3020
English red: RAL 3009
Sky blue: RAL 5015
Violet blue: RAL 5000
Acid green: RAL 6018
Forest green: RAL 6005
Granite grey: RAL 7016
Shine black: RAL 9005B
Volcanic sand: RAL 7011T
Textured black: RAL 9005T
Matt black: RAL 9005M
TEXTURED LACQUERED FINISHES
Atlantic sand: GRIS 2500 Sablé
Textured silver: RAL 9006T
PREMIUM LACQUERED FINISHES
ANTI
Aluminium
-FING
ERPR
ANTI INTS
-FING
Stainless steel
ERPR
ANTI INTS Nacre: RX 7190-XW
-FING
ERPR
INTS Bond silver: RAL 9006BD
ACCESSORIES
LACQUERED FINISHES
46
ACCESSORIES ENGRAVING
NAME PLATES FOR BANKS OF MAILBOXES
LASER ENGRAVING
CHARACTERISTICS
Mailboxes doors and flaps can be laser engraved numbering or lettering the mailbox in order to indetify them.
Name plates can be integrated into the bank of mailboxes to identify the bank with the name of the block of appartments, road, street... and it is placed on the top of the bank of mailboxes.
It is available for all the metal mailboxes finishes: lacquered, anodized and stainless steel. It is NOT availale for wood veneer or plastic doors. Tipografy: Arial Optional customization with company logos, icons, etc. Ref. LASER 1: Engraving up to 4 characters Ref. LASER 2: Engraving from 5 to 10 characters
ACCESSORIES
NAME CARDS ENGRAVING
In order to fix this aluminium name plate, it is strictly recommended to use a surround on the bank of mailboxes. (see page 50 and 51). Plate dimensions: 135 mm high. Maximum length: 2000 mm. The length of the plate is the same as the length of the bank of mailboxes. Front size: 75 mm high. Colour to select in page 45
C-560 Steel or aluminium name plate colour to select
Name cards in the mailboxes can be customized by engraving the desired text; usually the owner’s name.
C-562 Silver anodized aluminium name plate
2 types:
C-557 Gloss finished stainless steel name plate
• Adhesive card to replace the name card holder. • Ordinary card to place inside the name card holder. Available finishes: • Black background and White letters. • Silver background and black letters. • Gold background and black letters. Engraving of 3 to 5 lines is possible. Engraving is done in capital letters and the text alignment is centered. The text to be engraved shall be typewritten. The cards are not supplied fixed in the mailboxes.
Without name card holder
With name card holder
C-555 Satin finished stainless steel name plate
47
ACCESSORIES PARCEL SHELFS IN BANK OF METALLIC MAILBOXES Parcel shelves are very useful to leave advertising, flyers‌ Metal parcel shelves take up 1, 2 or 3 mailboxes wide and help to assemble regular shaped banks of mailboxes.
IN BANK OF WOODEN MAILBOXES Within wooden horizontal bank of mailboxes, parcel shelfs without size restriction can be made. Available for the following wooden Mailboxes: ELEGANTE / NATURA / PERSONAL
Width 1
Width 2
Width 3
Width 1
Width 2
Width 3
Milenio H4400/ Infinity H2000
H-44B1
H-44B2
H-44B3
Milenio H4500/ Infinity H2100
H-45B1
H-45B2
H-45B3
Milenio H4600/ Infinity H2200
H-46B1
H-46B2
H-46B3
Habitat H8100
H-81B1
H-81B2
H-81B3
Habitat H8200
H-82B1
H-82B2
H-82B3
Habitat H8100 INOX
H-81B1 I
H-81B2 I
H-81B3 I
Habitat H8200 INOX
H-82B1 I
H-82B2 I
H-82B3 I
Future H3400/ Liberty H3430/ Mira H8700
H-34B1
H-34B2
H-34B3
Future H3500/ Neo H8500/ Liberty H3530/ Mira H8800
H-35B1
H-35B2
H-35B3
Future H3600/ Liberty H3630/ Mira H8900
H-36B1
H-36B2
H-36B3
Neo H8600
H-86B1
H-86B2
H-86B3
ACCESSORIES
Available for the following metallic Mailboxes: MILENIO / HABITAT / NEO / FUTURE HORIZONTAL / LIBERTY / INFINITY / MIRA HORIZONTAL
48
ACCESSORIES NOTICE BOARDS
INTERCOM SYSTEM BOX
IN BANK OF METALLIC MAILBOXES
CHARACTERISTICS
Banks of metal and timber mailboxes may include notice boards.
Made up in the bank of mailboxes, this box is prepared to install the Intercom system.
Notice boards take up 3 or 6 mailboxes wide (3 rows x 1 column or 3 rows x 2 columns).
Intercom system is fixed on the panel provided (technical advise is required).
In order to fix the notice board, mailboxes must be banked with a surround.
It is suitable for models MILENIO H4500 / MILENIO H4550 (double access range) / HABITAT 8100/ H8200, HABITAT H8150/H8250 (double access range), TECNUM H4300/H4350 and INFINITY H2100.
Metal notice boards consist of an aluminium structure, with methacrylate door and lock. Available for the following metallic Mailboxes: MILENIO, FUTURE, INFINITY y MIRA.
ACCESSORIES
3 mailboxes
6 mailboxes
Future H3400/H3600 Mira H8700/H8900
H-34P3
H-34P6
Future H3500 Neo H8500/Mira H8800
H-35P3
H-35P6
Milenio H4400/H4600 Infinity H2000/H2200
H-44P3
H-44P6
Milenio H4500 Infinity H2100
H-45P3
H-45P6
IN BANK OF WOODEN MAILBOXES Within wooden horizontal bank of mailboxes, notice boards without size restriction can be made. Suitable for all the range of wooden mailboxes except KUBE.
Material: aluminium panel for MILENIO mailboxes (with silver anodised or white lacquered finish) and stainless steel or steel colour to select panel for HABITAT and INFINITY mailboxes. This Intercom system box can include all the internal mechanisms and wires to install the Intercom. The box is sealed with a nylon brush in order to protect the mechanisms from the bad weather. There are two different sizes for the Intercom system box, of 2 and 3 mailboxes high. 2 mailboxes
3 mailboxes
Milenio H4500/H4550 Infinity H2100
H-45AU2
H-45AU3
Habitat H8100/H8150
H-81AU2
H-81AU3
Habitat H8200/H8250
H-82AU2
H-82AU3
Tecnum H4300/H4350
H-43AU2
H-43AU3
49
ACCESSORIES FRAMES ALUMINIUM Frames are cut at 45° angles. Thickness: 1.20mm - Width: 40mm Maximum length: 2.080mm except silver anodized frames (3000 mm). Colour to select in page 45. Finish
Ref.
Lacquered (colour to select)
C-470
Silver anodized
C-472
When the bank is built in the wall, this is the best accessory to leave the bank flush with the wall.
ACCESSORIES
Frames are supplied fixed to the bank of mailboxes.
WOOD VENEER
STAINLESS STEEL
Thickness: 15mm - Width: 50mm
The edges are cut at 45º angles.
Maximum length: 2350mm
Thickness: 1mm - Width: 40mm
They are supplied by custom cut strips, NOT fixed to the bank of mailboxes. The edges are NOT cut at 45° angles.
Maximum length: 2.000mm
Finish
Ref.
Beech veneer
C-411
Sapelly veneer
C-412
Oak veneer
C-415
Finish
Ref.
Gloss
C-427
Satin finished
C-425
50
ACCESSORIES If the bank of mailboxes is not built in the wall a surronding around the bank gives a better appearance to the sides and top of the mailboxes. If the rear is visible, a piece can be added to cover it. Arregui recommends placing the bank of mailboxes undercover and protected from the rain. Surrounds are suplied fixed to the bank of mailboxes. 4 pieces
4 pieces + back
SURROUNDS GALVANIZED STEEL
GALVANISED STEEL WITH VOLUME
Option 1. Thickness: 1.2mm. Suitable for bank of horizontal Mailboxes.
Thickness: 21mm
Option 2. Thickness: 2mm. Recommended for vertical mailboxes and those banks of horizontal mailboxes which exceed a width of 1.500 mm, for it balances possible corrugations of the wall or mailboxes.
Maximum length: 2.080mm Galvanized steel back side. Colour to select in page 45.
ACCESSORIES
Maximum length: 2.080mm. Galvanized steel back side. Colour to select in page 45.
Thickness 1,2mm Finish
Ref.
Finish
Ref.
Colour to select C-490 (4 pieces)
Colour to select C-100 (4 pieces)
Colour to select C-440 (4 pieces + back)
Colour to select C-110 (4 pieces + back)
Thickness 2mm Finish
Ref.
Colour to select C2-490 (4 pieces) Colour to select C2-440 (4 pieces + back)
51
ACCESSORIES SURROUNDS STAINLESS STEEL
STAINLESS STEEL WITH VOLUME
Thickness: 1.20mm - Maximum length: 2.080mm
Thickness: 21mm - Maximum length: 2.080mm
Stainless steel back side.
Stainless steel back side.
Very suitable for exterior application.
Very suitable for exterior application.
Finish
Ref.
Finish
Ref.
Gloss C-107 (4 pieces) / C-117 (4 pieces+back) Satin finished C-105 (4 pieces) / C-115 (4 pieces+back)
ALUMINIUM
WOOD VENEER
Thickness: 20mm - Maximum length: 2.080mm except silver anodized surrounds (3000 mm).
Thickness: 16mm.
Includes corners that provide a greater strength to the surround and give a curved lines design. Available in lacquered finishes.
ACCESSORIES
Gloss C-497 (4 pieces) / C-447 (4 pieces+back) Satin finished C-495 (4 pieces) / C-445 (4 pieces+back)
Maximum length: 2.350mm
Silver anodized aluminium surround includes silver lacquered corners, not anodized.
Finish
Oak veneer
C-401
Very suitable for exterior application.
Beech veneer
C-407
Sapelly veneer
C-408
Aluminium back side. Colour to select in page 45.
Acabado
Lacquered Silver anodized
Ref.
C-350 (4 pieces) / C-370 (4 pieces+back) C-352 (4 pieces) / C-372 (4 pieces+back)
Ref. 4 pieces
52
ACCESSORIES SUPPORTS RECTANGULAR STEEL BASE SUPPORT Material: Steel support with anti-corrosion cataphoretic protection. Dimensions: 800 high x 50 wide x 100 depth. To be screwed to the floor. It is strictly recommended to use one support for each two columns of Mailboxes. Recommended as a central support for banks with side supports that excedes from 1700 mm width. Mailboxes must be banked with a surround in order to fix the suppports to it.
Rectangular steel base support
Rectangular steel side support
Colour to select in page 45. Ref. C-460 BASE
ACCESSORIES
250 210
800
150 110
Tubular stainless steel side supports
RECTANGULAR STEEL SIDE SUPPORT Material: Steel support with anti-corrosion cataphoretic protection. Dimensions: 1500 high x 50 wide x 100 depth.
TUBULAR STAINLESS STEEL SIDE SUPPORTS Material: Stainless steel. Dimensions: 1500 high x ø84
To be screwed to the floor.
To be screwed to the floor.
Mailboxes must be banked with a surround in order to fix the suppports to it.
Mailboxes must be banked with a surround in order to fix the suppports to it.
Colour to select in page. 45
Ref. C-387
Ref. C-460 LATERAL
138
54
250 210
0 16
1500
1500
150 110
53
ACCESSORIES SUPPORTS OVAL ALUMINIUM BASE SUPPORT Material: Aluminium. Dimensions: 800 high x 40 wide x 120 depth. To be screwed to the floor. It is strictly recommended to use one support for each two columns of Mailboxes. Aluminium wall fixed side support
Mailboxes must be banked with a surround in order to fix the suppports to it.
Oval aluminium base support
Oval aluminium side support
ALUMINIUM WALL FIXED SIDE SUPPORT
Colour to select in page. 45 Finish
Ref.
Material: Aluminium.
Lacquered colour to select
C-580
Silver anodized
C-582
Dimensions: 1800 high x 35 wide x 65 depth. To be screwed to the floor and to the wall. Innovative design which separates the bank of mailboxes flying from the wall up to 265 mm.
160 120
Suitable for vertical and horizontal Mailboxes. Mailboxes must be banked with a surround in order to fix the suppports to it.
100 60
800
Finish
120
Ref.
Silver anodized
C-572
Oak melamine shelf
C-570
OVAL ALUMINIUM SIDE SUPPORT Material: Aluminium.
265
Dimensions: 1500 high x 40 wide x 120 depth. To be screwed to the floor. Mailboxes must be banked with a surround in order to fix the suppports to it. Colour to select in page. 45 Ref.
Lacquered colour to select
C-590
Silver anodized
C-592
100 60
160 120
1500
120
1800
Finish
4
o/ 8
ACCESSORIES
Recommended as a central support for banks with side supports that excedes from 1700 mm width.
54
ACCESSORIES CHARACTERISTICS
TABLE
Material: Steel and stainless steel. To be screwed to the floor. An useful accessory as support for bank of mailboxes. A new way to install the mailboxes on an entrance hall. Suitable for all the references of mailboxes. It is recommended to bank the mailboxes with a surround. Colour to select on page 45
M15A10
Ref.
M15A20
750
M15A30
750
ACCESSORIES
425
1000
750
425
1500
425
2000
STEEL COLOUR TO SELECT *See pg. 45 M15A10
M15A20
M15A30
M15A25
M15A35
SATIN FINISHED STAINLESS STEEL M15A15
Libro Mailboxes installed on a White lacquered table M15A20.
Future Mailboxes installed on a silver lacquered table M15A20.
55
ACCESSORIES ROOF
SHELTER
COLOUR TO SELECT STEEL
WALL SHELTER
Material: Galvanized steel or stainless steel.
Material: Stainless steel or galvanized steel structure and methacrylate roof.
Design: Roof with even cantilever of 10 mm within the entire mailboxes group perimeter. Maximum length: 2000mm. In case the mailboxes are fastened to a wall, the roof will not have a cantilever on its rear part. The roof is supplied fixed in the bank of mailboxes. Mailboxes must be banked with a surround. Suitable for all the references of mailboxes. Colour to select on page 45
Can be adapted to the dimensions of the bank of mailboxes to install inside. OPTION 1: 30 cms depth roof. 路 Set of 2 framing square Finish colour to select
Ref.
C-033
Colour to select steel Satin finished stainless steel
C-033IS
路 Transparent methacrylate Ref. C-034
Finish
Ref.
Steel colour to select
C-130
Gloss finished stainless steel
C-137
Satin finished stainless steel
C-135
Finish colour to select
Ref.
Colour to select steel
C-035
Satin finished stainless steel
C-035IS
路 Transparent methacrylate Ref. C-036
FLOOR SHELTER Material: Galvanized steel structure and transparent methacrylate roof. Can be adapted to the dimensions of the bank of mailboxes to install inside. When the mailboxes are installed outside, exposed to inclement weather, the roof protects the mailboxes.
Set of 2 supports colour to select. Ref. C-030 Intermediate support: Ref. C-031 (necessary from 1.500 mm). Transparent methacrylate: Ref. C-032
ACCESSORIES
OPTION 2: 50 cms depth roof. 路 Set of 2 framing square