SPECIAL COLORS
ARREGUI SPECIAL FINISHES
- All the range of ARREGUI's metal mailboxes may be powder coated in any finish of customer's choice, from our standard colour chart shown in this page. - Also, any RAL finish from the Official RAL Colour Chart is available upon request.
PURE WHITE
RAL 9016
SILVER TEXTURED
RAL 9006T
NATURAL NACREOUS RX 7190-XW OCRE (GLOSS)
RAL 1011
CHROME (MATT)
RAL 9006M
VOLCANIC SAND
RAL 7011T
ATLANTIC SAND
GREY 2500 SABLE
GREEN
RAL 6005
SKY BLUE
RAL 5000
PURE ORANGE
RAL 2004
YELLOW GREEN
RAL 6018
BLACK (MATT)
RAL 9005M
BLACK TEXTURED
RAL 9005T
ACCESORIES FOR METAL MAILBOXES
- NOTE: Due to the limitations of the printing process, colour match must be checked against the official RAL Colour Chart. This is only intended to be a reference guide.
RAL
51
LASER ENGRAVING
MAILBOX LASER ENGRAVING
Mailboxes doors and flaps can be laser engraved numbering or lettering the mailbox in order to indetify them. - It is available for all the metal mailboxes finishes: powder coated, anodised and stainless steel. - It is NOT availale for wood veneer or plastic doors. - Tipografy: ARial - Optional customization with company logos, icons, etc.
From 5 to 10 characters
ACCESORIES FOR MAILBOXES
Customized with logo
Up to 4 characters
CUSTOM NAME CARDS 52
Adhesive card without name card holder
Ordinary card inside the name card holder.
Name cards in the mailboxes can be customized by engraving the desired text; usually the owner’s name. - 2 types: ordinary card to place inside the name card holder or an adhesive card to replace the name card holder. - The cards are available in black, gold or silver, combined with black or white letters. - Engraving of 3 to 5 lines is possible. - The text to be engraved shall be typewritten. - The cards are not supplied fixed in the mailboxes.
WHITE GOLD BLACK
NAME PLATES FOR BANKS OF MAILBOXES
Name plates can be integrated into the bank of mailboxes to identify the bank with the name of the block of appartments, road, street... this plate is made of aluminium and it is placed on the top of the bank of mailboxes.
C-561
SILVER ANODISED
C-562
SILVER TEXTURED
C-563
ATLANTIC SAND
C-565
CHAMPAGNE ANODISED
C-566
GRAPHITE ANODISED
C-567
VOLCANIC SAND
C-568
POLISHED C-557 STAINLESS STEEL SATIN FINISHED C-555 STAINLESS STEEL
ACCESORIES FOR METAL MAILBOXES
- In order to fix this aluminium name plate, it is strictly recommended to use a surround on the bank of mailboxes. - Plate dimensions: 135 mm high. Maximum length: 2000 mm The length of the plate is the same as the length of the bank of mailboxes. - Front size: 75 mm high.
WHITE POWDER COATED
53
PARCEL SHELVES FOR MAILBOXES
width 1
width 2
ACCESORIES MAILBOXES COMPLEMENTOS PARAFORBUZONES METÁLICOS 54 56
width 3
Parcel shelves are very useful to leave advertising, flyers… shelves also help to assemble regular shaped banks of mailboxes. - It is available for metal models:: MILENIO HABITAT NEO FUTURE HORIZONTAL LIBERTY INFINITY MIRA HORIZONTAL - Metal parcel shelves take up 1, 2 or 3 mailboxes wide..
width 1
width 2
width 3
Milenio H4400/ Infinity H2000
H-44B1
H-44B2
-
Milenio H4500/ Infinity H2100
H-45B1
H-45B2
-
Milenio H4600/ Infinity H2200
H-46B1
H-46B2
-
Habitat H8100
H-81B1
H-81B2
-
Habitat H8200
H-82B1
H-82B2
-
Habitat H8100 INOX. H-81B1 I
H-81B2 I
-
Habitat H8200 INOX. H-82B1 I
H-82B2 I
-
Future H3400/ H-34B1 Liberty 3430/ Mira Horizontal H8700
H-34B2
H-34B3
Future H3500/ Neo H8500/ Liberty 3530/ Mira H8800
H-35B1
H-35B2
H-35B3
Future H3600/ Liberty 3630/ Mira H8900
H-36B1
H-36B2
H-36B3
Neo H8600
H-86B1
H-86B2
-
NOTICE BOARDS FOR BANKS OF MAILBOXES
Banks of metal and timber mailboxes may include notice boards.
Future H3400/H3600/ H-34P3 Mira H8700/H8900
H-34P6
Future H3500/ Neo H8500/Mira H8800
H-35P3
H-35P6
Milenio H4400/H4600 Infinity H2000/H2200
H-44P3
H-44P6
Milenio H4500/ Infinity H2100
H-45P3
H-45P6
ACCESORIES FOR MAILBOXES
- Suitable for MILENIO and FUTURE metal horizontal mailboxes – notice boards could be of 3 or 6 mailboxes wide (3 rows x 1 column or 3 rows x 2 columns). Metal notice boards consist of an aluminium structure, with methacrylate door and lock. All the notice boards are available in matching finishes to suit the mailboxes. - Suitable for all the range of timber mailboxes except KUBE and ELEGANCE vertical V-6100.
3 mailboxes 6 mailboxes
INTERCOM SYSTEM BOX
55 Made up in the bank of mailboxes, this box is prepared to install the Intercom system. This way of integrating the entry system and the mailboxes, allows the creation of a neat bank of mailboxes with matching finish intercom system panel. - It is suitable for models MILENIO H4500, MILENIO H4550 (double access range), HABITAT H8100/H8200 and HABITAT H8150/H8250 (double access range). - Intercom system is fixed on the panel provided (technical advise is required). - Material: aluminium panel for MILENIO mailboxes (with silver anodised or white powder coated finish) and stainless steel panel for HABITAT mailboxes. - This Intercom system box can include all the internal mechanisms and wires to install the Intercom. The box is sealed with a nylon brush in order to protect the mechanisms from the bad weather. - There are two different sizes for the Intercom system box, of 2 and 3 mailboxes high.
Size
Size
2 mailboxes 3 mailboxes Milenio H4500/H4550 /Infinity H2100
H-45AU2
H-45AU3
Habitat H8100/H8150
H-81AU2
H-81AU3
Habitat H8200/H8250
H-82AU2
H-82AU3
Tecnum H4300/H4350
H-43AU2
H-43AU3
FRAMES FOR IN-WALL APPLICATION
FLAT ALUMINIUM
- Right – angled shaped aluminium profile. - In order to calculate the dimensions of the banks, see the dimensions board in page 27. - Special finish option (see page 29). - Thickness: 2.20 mm. - Width: 40 mm. - Maximum length: 2080 mm, except silver anodised frames (3000 mm).
ACCESORIES FOR MAILBOXES FLAT STAINLESS STEEL
56
WOOD VENEER
- Right – angled shaped aluminium profile. - In order to calculate the dimensions of the banks, see the dimensions board in page 27. - Special finish option (see page 29). - Thickness: 2.20 mm. - Width: 40 mm. - Maximum length: 3000 mm.
- In order to calculate the dimensions of the banks, see the dimensions board in page 27. - Thickness: 15 mm. - Width: 50 mm. - Maximum length: 2350 mm.
WHITE POWDER COATED
C-471
SILVER ANODISED
C-472
SILVER TEXTURED
C-473
BLACK TEXTURED
C-474
ATLANTIC SAND
C-475
VOLCANIC SAND
C-476
CHAMPAGNE ANODISED
C-477
GRAPHITE ANODISED
C-478
POLISHED STAINLESS STEEL
C-427
SATIN FINISHED STAINLESS STEEL
C-425
BEECH VENEER
C-411
SAPELLY VENEER
C-412
OAK VENEER
C-413
BUBINGA VENEER
C-414
SURROUNDS Arregui recommends placing the bank of mailboxes undercover and protected from the rain. Surrounds are suplied fixed to the bank of mailboxes
4 pieces
ALUMINIUM
ACCESORIES FOR MAILBOXES
GALVANISED STEEL
58
STAINLESS STEEL
- In order to calculate the dimensions of the banks, see the dimensions board. - New special corners that provide a greater strength to the surround and give a curved lines design. - Special finish option. - Very suitable for exterior application. - Thickness: 20 mm. - Maximum length: 2080 mm, except silver anodised surrounds (3000 mm). - Surrounds are suplied fixed to the bank of mailboxes
- In order to calculate the dimensions of the banks, see the dimensions board. - Special finish option. - Thickness: 1.20 mm. - Maximum length: 2080 mm. - Surrounds are suplied fixed to the bank of mailboxes
- In order to calculate the dimensions of the banks, see the dimensions board. - Very suitable for exterior application. - Thickness: 1.20 mm. - Maximum length: 2080 mm. - Surrounds are suplied fixed to the bank of mailboxes.
4 pieces+back 4 pieces
4 pieces + back
WHITE POWDER COATED
C-351
C-371
SILVER ANODISED
C-352
C-372
SILVER TEXTURED
C-353
C-373
BLACK TEXTURED
C-354
C-374
ATLANTIC SAND
C-355
C-375
VOLCANIC SAND
C-358
C-378
4 pieces
4 pieces + back
WHITE POWDER COATED
C-491
C-441
SILVER TEXTURED
C-492
C-442
BLACK TEXTURED
C-494
C-444
4 pieces
4 pieces + back
POLISHED STAINLESS STEEL
C-497
C-447
SATIN FINISHED STAINLESS STEEL
C-495
C-445
GALVANISED STEEL WITH VOLUME
- In order to calculate the dimensions of the banks, see the dimensions board. - Suitable for exterior and interior application. - Thickness: 21 mm - Maximum length: 2080 mm - Stainless steel back side.
4 pieces
4 pieces + back
WHITE POWDER COATED
C-101
C-111
BOND SILVER
C-102
C-112
BLACK
C-104
C-114
ATLANTIC SAND
C-103
C-113
VOLCANIC SAND
C-108
C-118
4 pieces
4 pieces + back
STAINLESS STEEL
C-105
C-115
STAINLESS STEEL BRUSH FINISH
C-107
C-117
ACCESORIES FOR MAILBOXES
STAINLESS STEEL WITH VOLUME
- In order to calculate the dimensions of the banks see the dimensions board. - Special finish option - Suitable for exterior and interior application. - Thickness: 21 mm - Maximum length: 2080 mm - Galvanized steel back side.
59
MADERA
- In order to calculate the dimensions of the banks, see the dimensions board. - Thickness: 16 mm. - Maximum length: 2350 mm. - Surrounds are supllied fixed to the bank of mailboxes.
4 pieces BEECH VENEER
C-407
SAPELLY VENEER
C-408
OAK VENEER
C-401
BUBINGA VENEER
C-402
SUPPORTS
MENT: IMPROVE covers d li w e n a s on the screw . the base
IN STEEL AND IN STAINLESS STEEL RECTANGULAR BASE SUPPORT
ACCESORIES FOR MAILBOXES
RECTANGULAR SIDE SUPPORT
- Material: steel with anti-corrosion cataphoretic protection - 0.8 m. height, it may be screwed to the ground or to the floor. - It is strictly recommended to use one support for each two columns of mailboxes. - Recommended as a central support for banks with side supports that exceeds from 1.700 mm. width. - Dimensions in mm: 800 high x 50 wide x 100 depth. - Mailboxes must be banked with a surround in order to fix the supports to it. - Special finish option.
- Material: steel with anti-corrosion cataphoretic protection - 1.5 m height, it may be screwed to the ground or to the floor. - Dimensions in mm: 1500 high x 50 wide x 100 depth. - Mailboxes must be banked with a surround in order to fix the supports to it. - Special finish option.
WHITE POWDER COATED
C-461
SILVER TEXTURED
C-460
BLACK TEXTURED
C-465
WHITE POWDER COATED
C-462
SILVER TEXTURED
C-464
BLACK TEXTURED
C-466
STAINLESS STEEL
C-387
60
TUBULAR SIDE SUPORT
- Material: Stainless Steel. - 1.5 m height, it may be screwed to the ground or to the floor. - Dimensions in mm: 1500 high x 84 diameter. - Mailboxes must be banked with a surround in order to fix the supports to it.
Rectangular base support
Rectangular side support
Tubular side suport
Wall fixed side support
ALUMINIUM WALL FIXED SIDE SUPPORT 265
- Material: Aluminium. - 1.5 m height, it may be screwed to the ground and to the floor. - Dimensions in mm: 1500 high x 40 wide x 120 depth. - Mailboxes must be banked with a surround in order to fix the supports to it. - Special finish option.
Base support
SILVER ANODISED
C-572
BLACK ANODISED
C-574
OAK MELAMINE tray /shelf
C-570
WHITE POWDER COATED
C-591
SILVER TEXTURED
C-592
BLACK TEXTURED
C-594
ACCESORIES FOR MAILBOXES
SIDE SUPPORT
- Material: Aluminium. - 1.80 m. height, it might be screwed to the wall and to the floor. - Innovative design, suitable for vertical and horizontal mailboxes. - Mailboxes must be banked with a surround in order to fix the supports to it. - Special finish option.
Side support
61
BASE SUPPORT
- Material: Aluminium. - 0.8 m. height, it may be screwed to the ground or to the floor. - It is strictly recommended to use one support for each two columns of mailboxes. - Recommended as a central support for banks with side supports that exceeds from 1.700 mm width. - Dimensions in mm: 800 high x 40 wide x 120 depth. - Mailboxes must be banked with a surround in order to fix the supports to it. - Special finish option.
WHITE POWDER COATED
C-581
SILVER TEXTURED
C-582
BLACK TEXTURED
C-584