HARLEY-DAVIDSON
allballsracinggroup.com
|
515.402.8000
|
sales@allballsracing.com
HARLEY-DAVIDSON
1.4kW HI-TORQUE STARTER MOTORS + Five speed, Six speed, M8 and Sportster starters available. + Manufactured with all new components that have been finely tuned for starting the HD V-Twin engine. + All Balls Racing starters have a lifetime warranty.
1.7kW HI-TORQUE STARTER MOTORS + Manufactured with all new components that have been finely tuned for starting the HD V-Twin engine. + Compact design fits FL series bikes without modification. + All Balls Racing starters have a lifetime warranty.
GENERATORS + Replacement generators feature a double sealed bearing for longer life. + Hi-temp epoxy coated armature for added durability.
allballsracinggroup.com
SOLENOID REPAIR KITS + Kit contains the moveable and stationary contacts, gaskets, insulators and hardware to replace all of the wear items.
SOLENOID ASSEMBLIES + A heavy-duty design suitable for use with our hi-performance 1.4kW Shovel Head starter motors. + Heavy duty copper contacts ensure full current flow.
STATOR COILS + Direct OEM replacement stator coils. + Plug and play wire connectors. + High Quality epoxy coated coils.
STARTER CLUTCH ASSEMBLIES
JACKSHAFT UPGRADE KIT
+ Replacement starter clutch assemblies are designed to improve clutch life under hard starting conditions.
+ Jackshaft will deliver more torque to the primary while reducing the occurrences of shaft binding.
+ Eliminates kick out issues caused by worn OEM clutches.
+ The cushioning spring is moved to the back of the shaft eliminating the need for the inner primary support bearing making the jackshaft easier to install.
STARTER BUTTON + Replaces the original solenoid cover and allows manual activation of the starter. + Available in black and chrome finishes and a variety of styles to fit aftermarket and OEM starters.
HI-PERFORMANCE BATTERY CABLES + Cables are manufactured with pure electrolytic grade, 36-gauge copper wire strands.
+ Bypasses the wiring prior to the solenoid.
+ The 7 over 7 bundling of the copper strands maximizes current flow and the flexibility of the cable.
+ Bike can be started despite defective components in the ignition circuit.
+ The outer jacket material is rated for 257°F (125 °C) and is oil and gas resistant.
+ Defective components can leave you stranded with a pricey towing and repair bill.
+ Cables are available in individual lengths, application specific cable kits and a convenient 25’ custom cable kit allowing shops to build custom length cables. + Available in clear or black.
HARLEY-DAVIDSON
STEERING BEARING KITS + Direct replacement for OEM taper bearings. + Kit contains top and bottom bearing assemblies and seals.
SWING ARM BEARING KITS + Kit contains all of the components required to properly rebuild the swing arm bearing assembly.
INNER PRIMARY BEARINGS KITS + Kit contains the bearing, inner bearing race, snap rings and seals to replace all wear items.
INNER PRIMARY UPGRADE KIT + Kit features a double row angular contact bearing with an oversize ID to provide a slip fit over the transmission main shaft. + A must for all modified engines.
WHEEL BEARING KITS
ABS WHEEL BEARING KITS
+ All Balls high-speed bearings are manufactured to ABEC 3 precision levels.
+ Direct OEM replacement bearing has reluctor ring built directly into bearing seal.
+ Triple lip rubber seals keep the grease in and the water and dirt out.
+ All Balls high-speed bearings are manufactured to ABEC 3 precision levels.
+ Chevron SRI 2 grease contains rust & oxidation inhibitors (-29° C - 177° C).
+ Triple lip rubber seals keep the grease in and the water and dirt out.
+ Double lip type TC seals with stainless steel garter springs.
+ Chevron SRI 2 grease contains rust and oxidation inhibitors (-29° C - 177° C).
allballsracinggroup.com
HARLEY-DAVIDSON
MIKUNI HSR CARBURETOR JET OR GASKET KITS + Jet kits include necessary main, pilot and accelerator pump jets and a range of slide needles + Gasket kits include gaskets, O-rings, float bowl, carburetor cap, spigot body screws, fuel mixture screw, float needle valve with FMK tip and accelerator pump boot. + NBR rubber material is used on all O-rings and rubber gaskets.
CARBURETOR REPAIR KITS + Kits include all the necessary components to repair a carburetor. + Harley-Davidson kits contain jetting selection, extended fuel mixture screw, intake gaskets, and manifold gaskets. + NBR rubber material is used on all O-rings and rubber gaskets NBR has excellent resistance to the ethanol used in today’s fuels.
OIL SPOUT SPACER BLOCK KIT + Fits Harley-Davidson Touring FLT FLH ‘93-’06 5 Speed models. + Spaces out the oil fill spout, necessary for installation of longer than stock high performance starter motors. + Kit Includes 1 Spacer, 2 gaskets and hardware necessary for installation.
EXTENDED FUEL MIXTURE SCREW + Kit includes all necessary parts to replace OEM style fuel mixture screw with an extended screw for easy tuning. + Kit includes extended mixture screw, o-ring, spring, and washer. + Not available for sale in California.
FORK BUSHING KITS + Bushing kits contain (2) slider bushings (2) leg bushings along with all of the copper washers, O-rings and fork seal snap rings. + Bushings have been Dyno tested to 500,000 strokes with less wear then OEM bushings.
FUEL PUMP REBUILD KITS + Restore lost performance of a non-functioning fuel pump with this economical solution. + Kits come ready for plug-and-play installation. + Competitively priced versus the competition. + Kit includes all necessary parts to rebuild the oem fuel pump module. + Kit includes necessary pump, filter, hoses, clamps, and wiring harness.
allballsracinggroup.com
REGULATOR RECTIFIER + 100% OEM interchangeable. + OEM style connectors for plug and play fitment. + Stock mounting locations. + Designed to handle increased power loads.
UNIVERSAL VOLTAGE REGULATORS + Five wire/three phase regulators available. + Replaces many OEM voltage regulators found on Harley models and custom bikes over the years. + Cutting and splicing is required- Cut and reuse the connectors from the original regulator. + Great for custom applications, upgrading, and retrofitting.
FORK & DUST SEAL KITS + The seal profile is engineered so that each seal lip places equal pressure on the fork tube. + Equalized seal pressure creates less drag and longer seal life. + The seal incorporates a 3rd seal lip which acts as an additional dust wiper to keep the fork tubes clean of dirt and grit. + Dust Seals features external garter springs to keep the fork tubes clean.
Part #775-808 / 3.22