INTEGRALIS® Brochure by Artemide

INTEGRALIS

INTEGRALIS®

A light for a safe environment

Index

TECHNOLOGICAL APPROACH

ENERGY DOSE

A RIGHT WAVELENGTH

A “dose” is the measure of the energy to be applied to the environment surfaces depending on time available to sanify, the necessary energy dose to achieve inactivation of potential pathogenic microorganisms.

A RIGHT TECHNOLOGY

Among 5 diferent light engines, Artemide can support you in choosing the most appropriate one to sanify your environments respecting the life rhythm inside it.

An iterative process to defne a scientifc human centric project

A RESPONSIVE CONTROL

INTEGRALIS® will be manageable through two control systems in total safe conditions, Artemide App and DALI control.

A SCALABLE RESPONSE TECHNOLOGICAL OPEN PLATFORM

A transversal solution for many application felds. A scalable formula depending on several variables: environment use destination, presence of people & time available for sanifcation and fnishing materials.

An iterative process

INTEGRALIS® provides a series of tools to write a symphony that can accompany humankind in a new way of being together.

An adaptive formula

INTEGRALIS® is a project that associates and integrates the visible and invisible spectral range in an innovative formula capable of regenerating the environmental qualities of the space.

It is a light that can act against pathogenic microorganisms in the environment by just illuminating them.

INTEGRALIS® is a range of lighting solutions that helps humans to live spaces more safely, protecting their health.

Artemide approaches the INTEGRALIS® project according to a omni comprehensive vision of light.

A rigorous scientific calculation takes into account the different variables of the project such as the human presence and its rhythm in time and space, the finishing materials, the time available to emit the antimicrobial light. Artemide is able to offer an integrated response in terms of light, environmental quality and management in compliance with the principles of sustainability, support of human experience and relationships in order to create the perception of places where humans can feel a sense of belonging.

INTEGRALIS® formula consists on five available technologies and is applied to various products of the Artemide collection.

The technical addendum was created as a preparatory tool for the applicability of the INTEGRALIS® technology through the sharing of a multidisciplinary approach based on science, technology, proxemics and analysis of a safe management that leads to the identification of an innovative and sustainable light solution aimed at a conscious and responsible answer towards humans and environments.

Species of microorganisms: photosensitive bacteria to visible light 405nm

Species

Acinetobacter baumannii

Aspergillus niger

Bacillus cereus

Campylobacter jejuni

Candida albicans

Clostridium difcile

Clostridium perfrin gens

Corynebacterium striatum

Elizabethkingia meningoseptica

Enetrobacter cloacae

Enterococcus faecium

Escherichia coli

Klebsiella pneumoniae

Lactobacillus plantarum

Legionella pnumophila

Visible and invisible spectrum

Listeria monocytogenes

Mycobacterium terrae

Proteus vulgaris

Pseudomonas aeruginosa

Saccharomyces cerevisiae

Salmonella enteritidis

Serratia marcescens

Shigella sonnei

Staphylococcus aureus

Staphylococcus epidermidis

Staphylococcus saprophyticus

Stenotrophomonas maltophilia

Streptococcus pyogenes

Streptomyces spp

Vibrio parahaemolyticus

Scientifc approach

IRRADIANCE X = TIME W/cm2

t(s)

J/cm2

ENERGY DOSE

• wEnergy dose depends on type of pathogens

• Irradiance depends on the distance between INTEGRALIS® and the surface: longer is the distance, exponentially lower is the irradiance

DAY MODE NIGHT MODE

UVC INTEGRALIS also kills viruses reliably and quickly. Artemide uses high performance LEDs. Because this type of disinfection is harmful to humans, it should only be carried out in the absence of people, with a possible integration with white light during people presence.

White INTEGRALIS ofers a Microbial growth control activity (DAY MODE) which is completely harmless for humans, with simultaneous optimum light quality.

White - Violet and Pure INTEGRALIS ofer:

- a Microbial growth control activity (DAY MODE) which is completely harmless for humans, with simultaneous optimum light quality - an Antimicrobial action (NIGHT MODE) which is harmless for humans even if people presence is not recommended.

Violet INTEGRALIS can be used alone or be paired to a white light performance. It ofers a strong Antimicrobial activity (NIGHT MODE) which is harmless for humans even if people presence is not recommended.

MINIMUM ANTIMICROBIAL DOSE

DURING DAILY ACTIVITIES

Human presence allowed

MICROBIAL GROWTH CONTROL MODE

NIGHT MODE

MAXIMUM ANTIMICROBIAL DOSE

DURING THE NIGHT OR PEOPLE ABSENCE Human presence NOT recommended

STRONGER MICROBIAL GROWTH CONTROL or ANTIMICROBIAL ACTION

VIRUS

BACTERIA FUNGI MOLD YEAST

VIOLET-BLUE LIGHT

MICROBIAL GROWTH CONTROL

ANTIMICROBIAL ACTION SANIFICATION

Technological approach

White INTEGRALIS

Microbial growth control.

Full spectrum & good perception.

• Fixed 5000K color temperature.

CRI 90. Dimmable (0-100%).

• Human presence ever allowed.

White - violet INTEGRALIS

• Microbial growth control through white+violet emission with fxed percentage mix.

• Stronger Microbial growth control through total violet emission.

Pure INTEGRALIS

• Microbial growth control with a perfect quality of the white light.

• Antimicrobial action through total violet emission.

Dimmable in Microbial growth control mode (10-100%).

Violet INTEGRALIS

Antimicrobial action.

On-of

• A prolonged human presence is not recommended in Antimicrobial action mode.

UVC INTEGRALIS

• Sanifcation.

• Not dimmable.

• Available as pure UV-C and hybrid solution (white light + UV-C).

• Dimmable in Microbial growth control mode (0-100%).

A prolonged human presence is allowed in Microbial growth control mode. It is not recommended in Stronger Microbial growth control mode.

• Very high efcacy.

• A prolonged human presence is allowed only in Microbial growth control mode. It is not recommended in Antimicrobial action mode.

• Safety sensors are recommended during Antimicrobial action mode.

Safety sensors and/or locked ambient required.

• Living beings presence is forbidden.

• Safety sensors are necessary.

• Possible damage of fnishing materials.

PERSONAL AREAS

RESIDENTIAL SPACES

PRIVATE OFFICE

HOTEL ROOM

PRIVATE HOUSE

TEMPORARY PERMANENCE

PROLONGED PERMANENCE

LIFT

RESTROOM

CHANGING ROOM

MEETING ROOM

GYM AREAS

OFFICE

EDUCATIONAL AREAS

WAITING AREAS

RESTAURANT COMMON AREAS

RETAIL SPACES

HOSPITAL AREAS

HOSPITALITY COMMON AREAS

AIRPORT COMMON AREAS

Proxemic approach

INTEGRALIS® follows the rhythm of life. It is transversal in applications and supports the human activities in common or personal spaces according to diferent people permanences.

Health & Hospital

Workplaces &

A.39 Difused Emission Pure INTEGRALIS - Day Mode

Corridor, Surgery department, Hospital, Milan - 2022

Health & Hospital

PUBLIC / COMMON AREAS

Continuous permanence spaces

Occupancy 24/7

WHITE INTEGRALIS

WHITE-VIOLET INTEGRALIS

PURE INTEGRALIS

VIOLET INTEGRALIS + WHITE LIGHT

connectivity.

Common spaces where occupancy is constant over 24 hours and there is a presence turnover (e.g. hospital ward and airport connectivity).

Occupancy: people presence in a space. It can be continuous, prolonged, temporary or intermittent.

Presence: can be constant (same people) or diversified (turnover).

Hospital area.

Hospitality common area.

Transportation

Airport waiting/lounge area.

PUBLIC

/ COMMON AREAS

Prolonged permanence spaces

Medium occupancy from 1 h to 8 h

WHITE INTEGRALIS

WHITE-VIOLET INTEGRALIS

PURE INTEGRALIS

VIOLET INTEGRALIS + WHITE LIGHT

Common spaces where occupancy is prolonged for at least 8 hours with constant people presence and which respect the day-night cycle (e.g. offices, classrooms).

Occupancy: people presence in a space. It can be continuous, prolonged, temporary or intermittent.

Presence: can be constant (same people) or diversified (turnover).

Office.

Educational area.

Kitchen.

Retail.

A.39 600X600 Difused Pure INTEGRALIS - Night Mode

Meeting room, Korian Heliopolis Hospice, Binasco (Milan) - 2021

Health & Hospital

PUBLIC

/ COMMON AREAS

Temporary permanence spaces

WHITE INTEGRALIS

WHITE-VIOLET INTEGRALIS

PURE INTEGRALIS

VIOLET INTEGRALIS + WHITE LIGHT

Common spaces where occupancy is temporary with a maximum duration of 4 hours and there is a turnover of people presences. Spaces that respect the day-night cycle (e.g. meeting rooms, gym areas).

Occupancy: people presence in a space. It can be continuous, prolonged, temporary or intermittent.

Presence: can be constant (same people) or diversified (turnover).

Meeting room.

Wellness area.

Gym.

Convivial space - Cantine - Restaurant.

Sharp 8x Violet INTEGRALIS - Night Mode

Changing room, Artemide Innovation Centre, Pregnana Milanese (Milan) - 2022

Workplaces

PUBLIC

/ COMMON AREAS

Intermittent permanence spaces

Fast occupancy from 1 min to 30 min

WHITE INTEGRALIS

WHITE-VIOLET INTEGRALIS

PURE INTEGRALIS

VIOLET INTEGRALIS + WHITE LIGHT WHITE LIGHT

UVC INTEGRALIS +

Common spaces where occupancy is intermittent and there is a high presence turnover. These spaces can have continuous intermittence during 24 hours (e.g. lifts and public toilets) or respect the day-night cycle (e.g. changing rooms, dressing rooms).

Occupancy: people presence in a space. It can be continuous, prolonged, temporary or intermittent.

Presence: can be constant (same people) or diversified (turnover).

Lift.

Common/Public restroom.

Retail changing room.

Changing room.

Tolomeo Pure INTEGRALIS - Day Mode

Private house, Frankfurt - 2022

Hospitality & Residential

PERSONAL AREAS

Prolonged permanence spaces

Long occupancy from 1 h to 16 h

WHITE INTEGRALIS

WHITE-VIOLET INTEGRALIS

PURE INTEGRALIS

Personal spaces where occupancy is prolonged and people presence is constant. Indicatively, the day-night cycle is respected (e.g. home spaces, private offices).

Occupancy: people presence in a space. It can be continuous, prolonged, temporary or intermittent.

Presence: can be constant (same people) or diversified (turnover).

Living room.

Dining room.

Private office.

Responsive Management

INTEGRALIS® is

Artemide App compatible. The level of efectiveness and the duration of use can also be individually controlled easily using Artemide App.

Artemide App for INTEGRALIS®

Dedicated user interfaces

Artemide App is a user-friendly and intuitive interface that can be used as a daily tool for private use and as well as a project variable for workplace and retail, public and urban spaces. Human being is the centre of the project, the orchestra director of his light concerto.

Artemide App is an intelligent tool that allows you to easily enter spaces, even unexpectedly. In fact, it does not require any specific wiring, the dialogue between the fixtures and the application takes place through the wireless device present in the lamp. This represents an important saving of time and costs during installation and the freedom to fit into any space, even at the last minute with a complete and dynamic lighting project.

The control with Artemide App, thanks to a simple and intuitive interface, facilitates the user in choosing the most suitable control mode according to the chosen INTEGRALIS® technology.

Artemide developed internally the specific interface for each INTEGRALIS® technology.

Depending on the antimicrobial action chosen in real-time or programmed through the scheduling function, the interface displays specific icons so as to immediately communicate to the user the action that the lamp is carrying out.

These same icons also play the role of buttons acting as recalling of the corresponding setting.

An alert icon, at the top right, also informs the end-user about the possible human presence during the specific function, thus increasing his awareness in using the lighting device in total safety.

Consistently with the traditional controls of the Artemide App, through the four buttons at the bottom it is possible to recall three different scenes with different dimming levels of both white light and Microbial growth control mode, up to the total switching off of each light performance through the OFF button.

Safe Management

Safe and easy management

To ensure complete safety for the user, Artemide has conveniently designed from a photobiological point of view each element of the INTEGRALIS® system in its various models.

The lighting emissions DAY MODE (white light) or NIGHT MODE (violet light), performed by the different INTEGRALIS® technologies, have been developed using the wavelengths of the visible light. Both emissions are easily recognisable and identifiable by the user unlike other types of radiation, particularly in the ultraviolet range, which are not perceptible to the human eye and which manifest their presence only after the damage has been done. Furthemore the NIGHT MODE, from a perceptive point of view, is not intended to be used as illumination for work situations rather than being accettable for possible temporary occupancy of the spaces.

Artemide carries out photobiological risk tests according to IEC 62471 in addition to the requirements of the UNI EN 605981 standard for each product in the INTEGRALIS® collection, in particular as regards to safety from the risk of blue light.

The risk category is indicated in the product sheet of each individual lighting fixture, together with the distances and relative maximum exposure times corresponding to each antimicrobial performance.

In relation to the individual project (number and type of devices provided, installation geometry in particular) it is possible to estimate the potential exposure levels and therefore the admissible exposure times for any occupants of the environment.

In any case, for products whose Antimicrobial action (NIGHT MODE) includes risk categories worthy of consideration (inside the visible spectrum) or for a more energetic performance as Sanification (UV-C), Artemide has developed a safety management system that is able to deactivate these features in case of people presence and manage its activation approval.

Safe eco-system

Safety levels and configurations

The INTEGRALIS® world, as individual or grouped lamps, can be managed in complete safety according to different modes involving interactive real-time commands by the user and automatic commands sent, for example, to the luminaires by means of a scheduler feature via a gateway.

In addition to scalability in terms of manual-automated commands, it is also managed in terms of the level of safety for the activation, in the absence of people, of both the Antimicrobial action (NIGHT MODE, particularly referred to lighting fixtures with photobiological risk category > 1) and Sanification (UV-C).

The elements that make up the "INTEGRALIS® Artemide App compatible luminaires safety control eco-system" and that can be combined with each other according to project requirements are:

- Artemide App installed on smart-device (required for system configuration)

- BLL wireless switch to be installed behind normal wall switches or remote

- PIR sensors (not supplied by Artemide) combined with wireless BLL switches (for indipendent use) to be remoted

- Door contacts (not supplied by Artemide)

- Indicator lights (not supplied by Artemide)

- Acoustic buzzers (not supplied by Artemide)

- INTEGRALIS® control unit with safety chain

- Gateway for scheduling feature

By selecting and combining these components it is possible to implement two main control modes according to two safety levels: basic and advanced

Artemide can therefore supply part of the necessary components, specially developed hardware (such as the control unit for example) that can interact with commercial devices (sensors and door contacts typical of the anti-intrusion industry that will be provided by the installer).

In addition to providing specific components, Artemide can also offer - depending on the complexity of the project - a supervision and commissioning service for INTEGRALIS® luminaires and devices during installation.

For not-App-compatible projects and controls, the system does not require the installation of the BLL wireless switch or INTEGRALIS® control unit; the safe management remains responsibility of the customer and is delegated to qualified external installers.

INTEGRALIS® light (single o in group)

BLL wireless switch

n.2 standard push buttons

Smart device with Artemide App PIR sensor / anti-intrusion sensor

Door contact

Alert sign

* Components not provided by Artemide. They must be chosen and provided by installers according to their preferred providers

** PIR sensor and door contact must be a normally closed dry contact type, like standard components used in anti-intrusion systems

Management eco-system

A. Base Level Safety

BLL wireless switch

INTEGRALIS® mode

The "Base level safety management" is carried out by the installer via a BLL wireless switch supplied by Artemide, which is easily programmable from a simple interface in the Artemide App.

The BLL wireless switch is an intelligent component for standard back wiring and can be combined with normally open dry contact push buttons, these not supplied by Artemide and left to the installer.

The BLL wireless switch allows the management of presence sensors and door contacts, typical commercial components of the anti-intrusion world, therefore not supplied by Artemide and which must be installed by a qualified fitter.

The BLL wireless switch is pre-set in standard modality to work with all kind of Artemide products (in standard mode - see Artemide App user guide for more information).

Once enrolled in the INTEGRALIS® network through Artemide App, it must be set very easily on the automatic INTEGRALIS® setting thus using a faster pre-set configuration.

In the "Base level safety management", the security of the system is based exclusively on BLL interaction among devices. Therefore it is recommended to be applied with general light products usually associated with a minimal photobiological risk category.

DAY MODE

INTEGRALIS® lighting performance is working in Microbial growth control (DAY MODE) in order to control the bacterial load during people presence and in normal daily activities. When the PIR (passive infra-red) sensor and/or the door contact are open, working together or separately, they impede the Antimicrobial action (NIGHT MODE).

Light can be dimmed by Artemide App on smart devices.

NIGHT MODE

The Antimicrobial action (NIGHT MODE) is performed during people absence once the entire safety chain (PIR sensor and/or door contact) is fully respected: PIR sensor doesn't detect any presence and door contact is closed. Antimicrobial action (NIGHT MODE) can be activated both from Artemide App on smart devices or from wireless switch through a push button connected to it.

During the commissioning phase of the wireless switch through Artemide App, the installer can set the destination of Antimicrobial action command.

DAY MODE

Once people come into the space, the safety chain is interrupted: PIR sensor detects human presence and/or door contact is open. The lighting fixture is automatically set on the previous status before Antimicrobial action (NIGHT MODE) was set.

↗ Technical Data

BLL WIRELESS SWITCH

Device for switching and controlling Artemide App products. Max N.3 inputs for external push buttons. Max 1 m distance. Mains power supply required.

To be installed inside fush mounting boxes or junction boxes.

BLL WIRELESS SWITCH WITH ANTENNA FOR INDIPENDENT USE

Device for switching and controlling Artemide App products. INTEGRALIS® mode N.2 inputs for external push buttons to enable/disable Antimicrobial action mode. N.1 input to control security ring. Installation as indipendent use. Max 15 m distance.

Mains power supply required.

Artemide App user interface for INTEGRALIS® BLL wireless switch.

Code

DV1080APP

Code

DV1101APP

INTEGRALIS® light (single o in group)

INTEGRALIS® control unit

PIR sensor / anti-intrusion sensor (and-or door contact / security key / emergency push button)

Smart device with Artemide App Light alarms (in & out)

Acoustic buzzer

Alert sign

BLL wireless switch (optional)

n.2 standard push buttons (optional) *

* Components not provided by Artemide. They must be chosen and provided by installers according to their preferred providers

** PIR sensor and door contact must be a normally closed dry contact type, like standard components used in anti-intrusion systems

Management eco-system

B. Advanced Level Safety

INTEGRALIS® control unit

The "Advanced level safety management" is based on the presence of the INTEGRALIS® control unit designed by Artemide for maximum protection of the individual especially for applications with lighting fixtures that have photobiological risk category > 1.

This device is responsible for activating the Antimicrobial action (NIGHT MODE) or Sanification (UV-C) in compliance with two basic conditions:

- the safety chain is closed (sensors, door contacts do not signal human presence, safety keys or emergency button not operated)

- the electrical current reading is in compliance with the threshold levels set during installation, for both DAY and NIGHT modes.

In fact, the highest level of reliability is ensured by the continuous current reading, which is relayed to an current sensing device connected to the control unit, guaranteeing a two-tier security level should the BLL communication protocol fail.

The configuration of the INTEGRALIS® control unit takes place through a dedicated interface in the Artemide App where, by enabling the device, it is possible to set an automatic reset of the Antimicrobial action or Sanification by setting the following parameters:

- exit time and duration of Antimicrobial action or Sanification

- scheduler.

In order to ensure the most inclusive feedback possible to the user, the INTEGRALIS® control unit can be combined with visual or acoustic indicators such as:

- indicator lights showing whether antimicrobial action is taking place

- an acoustic buzzer indicating its activation.

Real-time testing of system operation is also possible via the App.

INTEGRALIS® control unit and BLL wireless switch

It is also possible to integrate a BLL wireless switch into the safety management system operated by the INTEGRALIS® control unit, which, when connected to wall-mounted push-buttons, allows commands to be sent (to activate the Antimicrobial action and to return to the previous status) not only from the Artemide App. In this case, it will not be possible to keep the room exit time and Antimicrobial action duration active (NIGHT MODE).

DAY MODE

INTEGRALIS® lighting performance is working in Microbial growth control (DAY MODE) in order to control the bacterial load during people presence and in normal daily activities. When the PIR (passive infra-red) sensor and - or door contact (or other security systems) are open, working together or separately, they impede the Antimicrobial action (NIGHT MODE). Light can be dimmed by Artemide App on smart devices.

DAY MODE

The Antimicrobial action (NIGHT MODE) or Sanification (UV-C) are performed during people absence once the entire safety chain (PIR sensor and-or door contact or other security systems) is fully respected: i.e. PIR sensor doesn't detect any presence. Antimicrobial action (NIGHT MODE) or Sanification (UV-C) can be activated from Artemide App on smart devices after having set, by Artemide App, the "exit time" and "the duration" of the Antimicrobial Action or Sanification.

This programmed set up allows you to activate the Antimicrobial action or Sanification being still inside the space being advised by the acoustic buzzer rings during the entire "exit time" and by the internal light alarm flashing till these two antimicrobial performances are on.

NIGHT MODE / UV-C

For the entire duration of the Antimicrobial action (NIGHT MODE) or Sanification (UV-C) the external light alarm is on.

The acoustic buzzer is switch off till the PIR sensor detects a human presence playing a single ring to sign the change of the lighting status is going to the previous one before Antimicrobial action or Sanification were set.

↗ Technical Data

INTEGRALIS CONTROL UNIT

INTEGRALIS® control unit: to enable/disable Antimicrobial action or Sanifcation mode with advanced level safety.

100 - 240 VAC

BLL WIRELESS SWITCH WITH ANTENNA FOR INDIPENDENT USE

Device for switching and controlling Artemide App products.

INTEGRALIS® mode N.2 inputs for external push buttons to enable/disable Antimicrobial action mode. N.1 input to control security ring. Installation as indipendent use. Max 15 m distance. Mains power supply required.

Code

DV9002IN

Code

DV1101APP

Artemide App user interface for INTEGRALIS® control unit.

Materials resistance

materials resistance

When applying INTEGRALIS® technology in living spaces, it is advisable to take into account the UV wavelength degradation effect, present to some extent, on the finishing materials of the environments.

Resistance to ultraviolet rays is defined as the ability of a material to resist UV radiation, which can have a strong impact on the appearance and mechanical properties of materials.

The possible changes in the materials, depending on the extent of their resistance to UV, can in fact impact on various aesthetic aspects (such as yellowing, discolouration, whitening of the surface with the formation of stress cracks and streaks) and/or a variation in the mechanical properties such as embrittlement, softening and deformation.

Artemide has carried out accelerated aging tests on the main materials, reproducing the damage caused by exposure to the wavelengths used in the PURE INTEGRALIS and UV-C technologies. The results of these tests have made it possible to determine guidelines for the identification of any critical applications based on the behaviour of the different families of materials studied. They also highlighted how visible radiation is less damaging or degrading than UV-C.

Metals: UV resistant thanks to the presence of free electrons that absorb energy from photons, so UV-C does not cause any chemical bond disassociation (instead typical of polymers).

Ceramics: UV resistant thanks to very strong chemical bonds that require very high energy levels to be broken.

Polymers: generally susceptible to UV degradation due to the presence of fairly weak covalent bonds, polymers with double C-C bonds are the most subjected to degradation. The most frequent degradation mechanisms are photolysis (breaking the polymer chain) and the formation of radicals that can react in the presence of water or oxygen (hydrolysis or oxidation). The deterioration can also affect the physical characteristics (e.g. ductibility, mechanical strength) or produce yellowing.

There are also paints with metals inside them (absorbing UV) that can protect polymers (still to be investigated).

In the development of an INTEGRALIS® project, Artemide can suggest materials that are, by their nature, more suitable for these exposures, even if a final comparison with the manufacturer of the materials themselves will be necessary to verify their compatibility of use.

Traces for lighting projects

Photometric and Radiometric calculations

INTEGRALIS® products that operate in the visible light range (not UV-C) are first and foremost objects that emit light and therefore the project is primarily treated from a photometric point of view to ensure the correct light emission in terms of illuminance and the relative comfort on the part of the end user, depending on the intended use of the space.

The photometric approach is integrated with the radiometric one, related to the antimicrobial potential of each technological solution. It is expressed in a double calculation concerning the two possible radiometric performances DAY MODE and NIGHT MODE.

For Violet INTEGRALIS and UVC INTEGRALIS products, only the radiometric calculation is carried out as these wavelengths are unsuitable for visual tasks since the first is totally violet and the second is invisible to the human eye.

By calculating the radiometric effectiveness of the various devices equipped with specific INTEGRALIS® technology, Artemide adds a further level of competence and know-how being able to offer a design service dedicated to each individual space.

Radiometry

New parametric model

FOR HUMAN HEALTH & ENVIRONMENTAL QUALITY

ENVIRONMENTAL USE DESTINATION

ILLUMINANCE LEVELS REQUIRED

SPACE DIMENSIONS

SURFACES TO BE SANIFIED People

PRESENCE

PERMANENCE Time

AVAILABLE FOR ANTIMICROBIAL ACTIVITY Materials

EFFECT ON COLORS AND MATERIALS OF LIGHT ABSORBTION

EFFECT OF INTEGRALIS® ON ENVIRONMENTAL FINISHES

Antimicrobial efects related to INTEGRALIS® wavelengths

ANTIMICROBIAL ACTION MICROBIAL GROWTH CONTROL SANIFICATION

Radiometric calculation for 405 nm and UV-C

In projects which apply products equipped with INTEGRALIS® technologies operating in the visibile wavelengths (380-780nm), the calculation of the irradiance in the violet-blue light range is carried out considering hours of application during day and night (typically 12 + 12) in order to garantee two different levels of antimicrobial effect: Microbial growth control or Antimicrobial action.

The two energy levels emitted by INTEGRALIS® products have been amply tested by the research conducted by Artemide with the support of the Biotechnologies Life Sciences Department of the University of Insubria and the Molecular Medicine Department of the University of Padua.

The following pages show examples of application for each of the INTEGRALIS® technologies. These calculations are declined according to two typical environments, a single desk and an open space environment, with the aim of giving design guidelines that take into account the performance between light and radiometric performances.

The same calculation method, only radiometric in this case, is applied to UVC INTEGRALIS products.

The UV-C radiation, by its nature different from the visible one, requires significantly shorter application times which are defined each time according to the type of project and the antimicrobial effect desired.

WHITE - VIOLET

WHITE

Ilio Pipe family Nur family Nur Acoustic

Athena Mimesi

Discovery family

Tolomeo LED Vine Light table

INTEGRALIS products matrix

A.39 Sharp Refractive

Tagora 570

Vector 55 Sharp

Dual Function Line

Radiometric result reparametrized to achieve 500 lx illuminance on the desk.

INTEGRALIS® technology and product name

This part specifies if the calculation is Photometric (Illuminance - lx) or Radiometric (Irradiance - mW/m2)

Light mode considered in the calculation

Space dimension and layout for the calculation

photometric / radiometric values

WHITE-VIOLET INTEGRALIS

DISCOVERY SPACE SQUARE

↗ RADIOMETRIC RESULTS

Microbial growth control mode DAY MODE (White light with violet light contribution)

Discovery Space Square

Reading guide of photometric and radiometric calculations

↗ RADIOMETRIC RESULTS

STRONGER Microbial growth control mode

NIGHT MODE (Violet light only)

Irradiance: 660 mW/m2

Nur White INTEGRALIS

WHITE INTEGRALIS

↗ Technical Data

NUR LED - ANTHRACITE GREY

*Artemide App compatible.

NUR LED - ALUMINUM GREY

NUR 1618 LED - ANTHRACITE GREY

NUR 1618 LED - ALUMINUM GREY

MacAdam 3SDCM

L80 (10K) 55000h

CRI =90 CCT (K) : 5000K

Artemide App

Code A243300IN0APP*

Artemide App

Code A243310IN0APP*

Code A243200IN0

Code A243210IN0

Nur Acoustic White INTEGRALIS

Ernesto Gismondi

2020

WHITE INTEGRALIS

↗ Technical Data

NUR ACOUSTIC GREY

NUR ACOUSTIC GREEN

NUR ACOUSTIC WHITE

NUR ACOUSTIC RED NUR ACOUSTIC BLUE

Code

MacAdam 3SDCM

L80 (10K) 55000h

CRI =90

CCT (K) : 5000K

A243700IN0

Code

A243770IN0

Code A243720IN0

Code A243740IN0

Code A243750IN0

WHITE INTEGRALIS

NUR 1618 - NUR ACOUSTIC

Designed by Ernesto Gismondi

↗

PHOTOMETRIC RESULTS

Single Desk

1x Nur 1618 or Nur Acoustic

Open Space

9x Nur 1618 or Nur Acoustic

↗ RADIOMETRIC RESULTS

Microbial growth control mode

DAY MODE (White light 5000 K)

Single Desk

1x Nur 1618 or Nur Acoustic

Open Space

9x Nur 1618 or Nur Acoustic

Radiometric results for 500 lx illumination (application time 12h)

Irradiance: 291 mW/m2

Average energy density: 1,25 J/cm2

Discovery White-Violet INTEGRALIS

Ernesto Gismondi 2

WHITE-VIOLET INTEGRALIS

↗

Technical Data

Artemide App compatible.

DISCOVERY SPACE SQUARE 9 0x9 0cm

MODE 42 W XF 1852 lm 1124 mW 2700 K

NIGHT MODE 42 W XF ND 3406 mW

MacAdam 3SDCM

L70 B50 60000h L70 B50 20000h CRI =80

Artemide App

Code

20000.10/30/60.IN1APP

MODE 63 W XF 2778 lm 1686 mW 2700 K

MODE 63 W XF ND 5109 mW

DISCOVERY VERTICAL Ø700

MODE 42 W XF 1852 lm 1124 mW

MODE 42 W XF ND 3406 mW

DISCOVERY VERTICAL Ø1000

MODE 60 W XF 2646 lm 1606 mW 2700 K

NIGHT MODE 60 W XF ND 4866 mW

DISCOVERY VERTICAL Ø1400

MODE 84 W XF 3704 lm 2248 mW 2700

MODE 84 W XF ND 6812 mW

DISCOVERY FLOOR (40x157cm)

MODE 66 W XF 2972 lm 1804 mW 2700 K

NIGHT MODE 66 W XF ND 5467 mW

Artemide App

Code

DISCOVERY SPACE RECTANGULAR 75x150cm Code

20020.10/30/60.IN1APP

Artemide App

19922.10/30/60.IN1APP Code

19932.10/30/60.IN1APP

Artemide App

Code

19942.10/30/60.IN1APP

Artemide App

Code 20400.30.IN1APP

WHITE-VIOLET INTEGRALIS

DISCOVERY SPACE SQUARE

Designed by Ernesto Gismondi

↗ PHOTOMETRIC RESULTS

White light with violet light contribution

Single Desk

1 x Discovery Space Square

Open Space

9 x Discovery Space Square

WHITE-VIOLET INTEGRALIS

DISCOVERY SPACE SQUARE

↗ RADIOMETRIC

RESULTS

Microbial growth control mode

DAY MODE (White light with violet light contribution)

Radiometric results for 500 lx illumination (application time 12h)

Irradiance: 300 mW/m2

Average energy density: 1,3 J/cm2

1x Discovery Space Square

Open Space Single Desk

9x Discovery Space Square

↗ RADIOMETRIC RESULTS

STRONGER Microbial growth control mode

NIGHT MODE (Violet light only)

1x Discovery Space Square

Radiometric results for 500 lx illumination (application time 12h)

Irradiance: 920 mW/m2

Average energy density: 3,97 J/cm2 Open Space Single Desk

9x Discovery Space Square

Tolomeo LED Pure INTEGRALIS

Michele De Lucchi, Giancarlo Fassina

2021

PURE INTEGRALIS

↗ Technical Data

TOLOMEO LED

Table version - Accessories

Table base ø cm. 23 - aluminum

Table clamp - aluminum

Desk fxed support - aluminum

Floor version - Accessories

Floor support - Aluminum

Sliding support - Aluminum

Wall version - Accessories

Wall support - Aluminum

MacAdam 4SDCM

L80 (10K) 28500h

CRI =80

CCT (K) : 3600K

IP20

PURE INTEGRALIS

TOLOMEO LED

Designed by Michele De Lucchi, Giancarlo Fassina

↗ PHOTOMETRIC RESULTS

DAY MODE (White light with violet light contribution)

Single Desk 1x Tolomeo LED

↗ RADIOMETRIC RESULTS

Microbial growth control mode

DAY MODE (White light with violet light contribution)

Single Desk 1x Tolomeo LED

Radiometric results for 500 lx illumination (application time 12h)

Irradiance: 351 mW/m2

Average energy density: 1,48 J/cm2

Carlotta de Bevilacqua

2020

Screens supplied separately. Artemide App electronic driver included.

↗ Technical Data

AT146.01/04/05.IN2APP

AT196.01/04/05.IN2APP

AT226.01/04/05.IN2APP

AT236.01/04/05.IN2APP

AT246.01/04/05.IN2APP

Optic

Undimmable Feeding kit including 2 suspension cables 2000 mm (3 poles)

End cap kit (2 pcs)

Screen quantity to order

1 M186700IN 1 AT09900IN

2 M186700IN

2 AT09900IN

Mechanical joint including 1 suspension cable for system Accessories ceiling Accessories suspension

End cap kit (2 pcs)

Optional control devices - BLL wireless switch

Device for switching and controlling Artemide App products. Max N.3 inputs for external push buttons. Max 1 m distance.

Mains power supply required.

To be installed inside fush mounting boxes or junction boxes.

Device for switching and controlling Artemide App products. Pure Integralis: N.2 inputs for external push buttons to enable/ disable Antimicrobial action mode. N.1 input to control security ring.

Installation as indipendent use. Max 15 m distance. Mains power supply required.

Ceiling bracket and mechanical joint for system

End ceiling bracket (2 pcs)

* ONLY for professional use: contact qualifed Artemide personnel to evaluate and validate the applicability in compliance with the minimum installation requirements. Coordination with environmental safety systems and sensors required. Installation must only be performed by qualifed personnel. For further information contact Artemide.

PURE INTEGRALIS

Opal diffuser supplied separately. Artemide App electronic driver included.

↗ Technical Data

Code

AT132.01/04/05.IN2APP

AT142.01/04/05.IN2APP

AT152.01/04/05.IN2APP

AT182.01/04/05.IN2APP

A.39 DIFFUSED EMISSION - SUSPENSION DIRECT/INDIRECT EMISSION*

Artemide App

AT192.

AT222.

Opal difuser (suspension, ceiling)

2368 mm 2960 mm 10000 mm roll

Accessories suspension

Undimmable Feeding kit including 2 suspension cables 2000 mm (3 poles)

Mechanical joint including 1 suspension cable for system

End cap kit (2 pcs)

Optional control devices - BLL wireless switch

Code AT09505IN AT09506IN AT09507IN AT10000IN

End cap kit (2 pcs)

Ceiling bracket and mechanical joint for system

End ceiling bracket (2 pcs)

Code AT894.01/04/05 AT09501 AT09502

Device for switching and controlling Artemide App products. Max N.3 inputs for external push buttons. Max 1 m distance.

Mains power supply required. To be installed inside fush mounting boxes or junction boxes.

Device for switching and controlling Artemide App products. Pure Integralis: N.2 inputs for external push buttons to enable/ disable Antimicrobial action mode. N.1 input to control security ring.

Installation as indipendent use. Max 15 m distance. Mains power supply required.

PURE INTEGRALIS

A.39 SUSPENSION DIFFUSED EMISSION

↗ PHOTOMETRIC RESULTS

White light with violet light contribution

Single Desk

1x A.39 Diffused Suspension 1200 mm

Open Space

9x A.39 Diffused Suspension 1200 mm

PURE INTEGRALIS

A.39 SUSPENSION DIFFUSED DIRECT EMISSION

↗ RADIOMETRIC RESULTS

Microbial growth control mode

DAY MODE (White light with violet light contribution)

Radiometric results for 500 lx illumination (application time 12h)

Irradiance: 756 mW/m2

Average energy density: 3,3 J/cm2

1x A.39 Diffused Suspension 1200 mm

Open Space Single Desk

9x A.39 Diffused Suspension 1200 mm

↗ RADIOMETRIC RESULTS

Antimicrobial action mode NIGHT MODE (Violet light only)

Single Desk

1x A.39 Diffused Suspension 1200 mm

Open Space

9x A.39 Diffused Suspension 1200 mm

Radiometric results for 500 lx illumination (application time 12h)

Irradiance: 2247 mW/m2

Average energy density: 9,7 J/cm2

WHITE INTEGRALIS

Opal diffuser supplied separately. Optional Artemide App interface supplied separately. The App driver can not be controlled by DALI dimming system and viceversa.

↗ Technical Data

DIFFUSED

IP20

MacAdam 3SDCM

L70(12K)=72000h CRI =

Code

AT132.01/04/05.IN0*

AT142.01/04/05.IN0*

AT152.01/04/05 IN0*

AT182.01/04/05 IN0*

Accessories ceiling Accessories suspension

Dimmable or APP Feeding kit including 2 suspension cables 2000 mm (5 poles)

Mechanical joint including 1 suspension cable for system

End cap kit (2 pcs)

Code AT10500 AT10500APP (Up to 40 DALI addresses) AT09500

AT894.01/04/05

Opal difuser in polycarbonate (suspension, ceiling)

Length

mm roll Code AT09505IN AT09506IN AT09507IN AT10000IN

End cap kit (2 pcs)

Ceiling bracket and mechanical joint for system

End ceiling bracket (2 pcs)

BLL - DALI interface for Artemide App (with antenna, can be used to control with Artemide App up to 40 DALI drivers)

Code

AT894.01/04/05

AT09501

AT09502

DV1054APP

WHITE INTEGRALIS

Screens supplied separately. Artemide App interface supplied separately. The App driver can not be controlled by DALI dimming system and viceversa.

↗ Technical Data

IP20 MacAdam 3SDCM Life L80 (10K) 55000h CRI = 90

* 1 DALI address ** 2 DALI addresses

Code

AT136.01/04/05.IN0*

AT146.01/04/05.IN0*

AT156.01/04/05.IN0*

AT186.01/04/05.IN0*

- SUSPENSION DIRECT/INDIRECT EMISSION Dimmable DALI

Code AT196.01/04/05.IN0* AT226.

Accessories ceiling Accessories suspension

Dimmable or APP Feeding kit including 2 suspension cables 2000 mm (5 poles)

Mechanical joint including 1 suspension cable for system

End cap kit (2 pcs)

Code AT10500 AT10500APP (Up to 40 DALI addresses AT09500

AT895.01/04/05

End cap kit (2 pcs)

Ceiling bracket and mechanical joint for system

End ceiling bracket (2 pcs)

BLL - DALI interface for Artemide App (with antenna, can be used to control with Artemide App up to 40 DALI drivers)

Optic

Length 1184 mm (4 pcs) 1480 mm (5 pcs) Code M186700IN AT09900IN

Screen quantity to order 1 M186700IN 1 AT09900IN 2 M186700IN 2 AT09900IN

Code AT895.01/04/05

AT09501

AT09502

DV1054APP

WHITE INTEGRALIS

A.39 SUSPENSION DIFFUSED DIRECT EMISSION

Designed by Carlotta de Bevilacqua

↗ PHOTOMETRIC RESULTS

White light 5000 K

Single Desk

1x A.39 Diffused Suspension 1200 mm

Open Space

12x A.39 Diffused Suspension 1200 mm

↗ RADIOMETRIC RESULTS

Microbial growth control mode

DAY MODE (White light 5000 K)

Single Desk

1x A.39 Diffused Suspension 1200 mm

Open Space

12x A.39 Diffused Suspension 1200 mm

Radiometric results for 500 lx illumination (application time 12h)

Irradiance: 338 mW/m2

Average energy density: 1,68 J/cm2

Tagora 570 Pure INTEGRALIS

S. / R. Cornelissen

PURE INTEGRALIS

220/240Vac 50/60Hz electronic ballast included. * 4 DALI addresses ** 5 DALI addresses

↗ Technical Data

TAGORA 570 SUSPENSION1

TAGORA 570 SUSPENSION DIRECT/INDIRECT EMISSION1

Artemide App

Code M2493.1/2/3/4/6.1IN2APP*

Artemide App

Code M2403.1/2/3/4/6.1IN2APP**

TAGORA 570 CEILING1

Artemide App

Code M2483.1/2/3/4/6.1IN2APP*

Optional control devices - BLL wireless switch

Device for switching and controlling Artemide App products. Max N.3 inputs for external push buttons. Max 1 m distance. Mains power supply required. To be installed inside fush mounting boxes or junction boxes.

Device for switching and controlling Artemide App products. Pure Integralis: N.2 inputs for external push buttons to enable/ disable Antimicrobial action mode. N.1 input to control security ring.

Installation as indipendent use. Max 15 m distance. Mains power supply required.

1 ONLY for professional use: contact qualifed Artemide personnel to evaluate and validate the applicability in compliance with the minimum installation requirements. Coordination with environmental safety systems and sensors required. Installation must only be performed by qualifed personnel. For further information contact Artemide.

White

PURE INTEGRALIS

TAGORA 570 CEILING

↗ PHOTOMETRIC RESULTS

White light with violet light contribution

Single Desk

1x Tagora 570 Ceiling

Open Space

9x Tagora 570 Ceiling

PURE INTEGRALIS

TAGORA 570 CEILING

↗ RADIOMETRIC RESULTS

Microbial growth control mode

DAY MODE (White light with violet light contribution)

Single Desk

1x Tagora Ceiling

Open Space

9x Tagora Ceiling

Radiometric results for 500 lx illumination (application time 12h)

Irradiance: 557 mW/m2

Average energy density: 2,94 J/cm2

↗ RADIOMETRIC RESULTS

Antimicrobial action mode

NIGHT MODE (Violet light only)

Single Desk

1x Tagora Ceiling

Open Space

9x Tagora Ceiling

Radiometric results for 500 lx illumination (application time 12h)

Irradiance: 1553 mW/m2

Average energy density: 6,7 J/cm2

PURE INTEGRALIS

Artemide App electronic driver included.

↗ Technical Data

A.39 6 00X6 00 DIFFUSED RECESSED*

Life L70 28400h CRI = 80 CCT= 3600 K

Artemide App W Luminous Flux Radiant Flux CCT CRI DAY MODE 39 W 3007 lm 4544 mW 3600 K 80 NIGHT MODE 54 W ND 14022 mW

Code AT90001IN2APP

Optional control devices - BLL wireless switch

Device for switching and controlling Artemide App products. Max N.3 inputs for external push buttons. Max 1 m distance.

Mains power supply required. To be installed inside fush mounting boxes or junction boxes.

Device for switching and controlling Artemide App products. Pure Integralis: N.2 inputs for external push buttons to enable/ disable Antimicrobial action mode. N.1 input to control security ring.

Installation as indipendent use. Max 15 m distance. Mains power supply required.

PURE INTEGRALIS

A.39 600X600 DIFFUSED

↗ PHOTOMETRIC RESULTS

White light with violet light contribution

Single Desk

1x A.39 600x600 Diffused

Open Space

9x A.39 600x600 Diffused

PURE INTEGRALIS

A.39 600X600 DIFFUSED

↗ RADIOMETRIC

RESULTS

Microbial growth control mode

DAY MODE (White light with violet light contribution)

Single Desk

1x A.39 600x600 Diffused

Open Space

9x A.39 600x600 Diffused

Radiometric results for 500 lx illumination (application time 12h in open space)

Irradiance: 760 mW/m2

Average energy density: 3,27 J/cm2

↗ RADIOMETRIC RESULTS

Antimicrobial action mode

NIGHT MODE (Violet light only)

Single Desk

1x A.39 600x600 Diffused

Open Space

9x A.39 600x600 Diffused

Radiometric results for 500 lx illumination (application time 12h)

Irradiance: 2247 mW/m2

Average energy density: 9,75 J/cm2

WHITE INTEGRALIS

Louvres supplied separately. DALI electronic driver included.

↗

Technical Data

A.39 SHARP REFRACTIVE 6 00X6 00 RECESSED

1 Direct luminous fux: measured using black louvres.

A.39 SHARP REFRACTIVE 1200X300 RECESSED

MacAdam 3SDCM

L70 (6K) 50000h

=90 CCT (K) : 5000K

A.39 SHARP REFRACTIVE 6 00X6 00 CEILING A.39 SHARP REFRACTIVE 1200X300 CEILING Dimmable DALI Dimmable

.IN0

Code CD1031.01/04.IN0

Code CD0131.01/04.IN0

Code CD1131.01/04.IN0

1 Direct luminous fux: measured using black louvres.

Frame for recessed version

Recessed frame for installation on plasterboard false ceiling. A.39 Sharp Refractive 600x600 Recessed frame for installation on plasterboard false ceiling. A.39 Sharp Refractive 1200x300

A.39 Sharp Refractive 600x600 A.39 Sharp Refractive 1200x300

(6pcs)

Louvres

WHITE INTEGRALIS

A.39

SHARP REFRACTIVE 600X600

Designed by Carlotta de Bevilacqua

↗ PHOTOMETRIC RESULTS

White light 5000 K

Single Desk

1x A.39 Sharp Refractive 600x600

Open Space

9x A.39 Sharp Refractive 600x600

↗ RADIOMETRIC RESULTS

Microbial growth control mode

DAY MODE (White light 5000 K)

Single Desk

1x A.39 Sharp Refractive

600x600

Open Space

9x A.39 Sharp Refractive

600x600

Radiometric results for 500 lx illumination (application time 12h)

Irradiance: 291 mW/m2

Average energy density: 1,25 J/cm2

WHITE INTEGRALIS

Track version for Onetrack tracks, undimmable or DALI dimmable. Magnetic version for A.24 tracks, D.ART dimmable.

↗

Technical Data

VECTOR 55 TRACK 230V

MODE 25 W S 16° 1651 lm 1175 mW

F 23° 1686 lm 1224 mW

WF 32° 1768 lm 1301 mW DAY MODE 25 W S 16° 1651 lm 1175 mW

F 23° 1686 lm 1224 mW

WF 32° 1768 lm 1301 mW

VECTOR 55 MAGNETIC

MODE 23 W S 16° 1651 lm 1175 mW

F 23° 1686 lm 1224 mW WF 32° 1768 lm 1301 mW

VECTOR 55 PENDANT MAGNETIC

MODE 23 W S 16° 1651 lm 1175 mW

F 23° 1686 lm 1224 mW

WF 32° 1768 lm 1301 mW

Code

AN101.01/04.IN0

AN102.01/04.IN0

AN103.01/04.IN0

Undimmable Dimmable DALI

Code

AN106.01/04.IN0

AN107.01/04.IN0

AN108.01/04.IN0

Dimmable DALI

Code

AP101.01/04.IN0

AP102.01/04.IN0

AP103.01/04.IN0

Dimmable DALI

Code

AP301.01/04.IN0

AP302.01/04.IN0

AP303.01/04.IN0

WHITE INTEGRALIS

55

Designed by Carlotta de Bevilacqua VECTOR

↗

PHOTOMETRIC RESULTS

White light 5000 K

Single Desk

1x Vector 55

Open Space

16x Vector 55

↗ RADIOMETRIC RESULTS

Microbial growth control mode

DAY MODE (White light 5000 K)

Single Desk

1x Vector 55

Open Space

16x Vector 55

Radiometric results for 500 lx illumination (application time 12h)

Irradiance: 338 mW/m2

Average energy density: 1,47 J/cm2

VIOLET INTEGRALIS

Track version for Onetrack tracks, undimmable or DALI dimmable. Magnetic version for A.24 tracks, D.ART dimmable.

VECTOR 55 TRACK 230V*

Code AN103.01/04.IN4

Code AN108.01/04.IN4

1DALI versions can be used ONLY in junction with presence detector and BMS. BMS have to send a switch-off command in case presence is detected.

VECTOR 55 MAGNETIC*

Optional control devices - BLL wireless switch

Code AP103.01/04.IN4

louvre Adjustable dowsers

Device for switching and controlling Artemide App products. Max N.3 inputs for external push buttons. Max 1 m distance.

Mains power supply required.

To be installed inside fush mounting boxes or junction boxes.

Device for switching and controlling Artemide App products. Violet Integralis: N.2 inputs for external push buttons to enable/ disable Antimicrobial action mode. N.1 input to control security ring.

Installation as indipendent use. Max 15 m distance. Mains power supply required.

VIOLET INTEGRALIS

↗ RADIOMETRIC RESULTS

Antimicrobial action mode

NIGHT MODE (Violet light only)

Single Desk

1x Vector 55

Open Space

16x Vector 55

Irradiance: 2384 mW/m2

Average energy density: 10,3 J/cm2 (application time 12h)

↗ Technical Data

SHARP SMD

Louvres supplied separately. 220/240Vac 50/60Hz electronic ballast included.

Undimmable

Code

AF463.01/04/05.IN4

AF464.01/04/05.IN4

AF465.01/04/05.IN4 SHARP SMD

Louvres

VIOLET INTEGRALIS

Driver 700mA SELV and louvres supplied separately.

↗ Technical Data

SHARP RECESSED TRIMLESS

SHARP TRIMLESS 4X*

Flux NIGHT MODE 11 W F 20° 3495 mW

L70 50000h W Beam

WF 36° 3495 mW

XF 52° 3495 mW

Code

AF60600IN4

AF60700IN4

AF60800IN4

SHARP TRIMLESS 8X*

Beam

Flux NIGHT MODE 22 W F 20° 6810 mW

WF 36° 6810 mW

XF 52° 6810 mW

SHARP RECESSED TRIM

SHARP TRIM 4X*

Flux NIGHT MODE 11 W F 20° 3495 mW

36° 3495 mW XF 52° 3495 mW

Code

AF65300IN4

AF65400IN4

AF65500IN4

Code

AF106.01/04/05.IN4

AF107.01/04/05.IN4

AF108.01/04/05.IN4

SHARP TRIM 8X*

Flux NIGHT MODE 22 W F 20° 6810 mW

WF 36° 6810 mW XF 52° 6810 mW

Code

AF153.01/04/05.IN4

AF154.01/04/05.IN4

AF155.01/04/05.IN4

VIOLET INTEGRALIS

1DALI versions can be used ONLY in junction with presence detector and BMS. BMS have to send a switch-off command in case presence is detected.

Optional control devices - BLL wireless switch

Device for switching and controlling Artemide App products. Pure Integralis: N.2 inputs for external push buttons to enable/ disable Antimicrobial action mode. N.1 input to control security ring. Installation as indipendent use. Max 15 m distance. Mains power supply required.

Louvres

VIOLET INTEGRALIS

Designed by Carlotta de Bevilacqua SHARP 4X

↗ RADIOMETRIC RESULTS

Antimicrobial action mode NIGHT MODE (Violet light only)

Irradiance: 1248 mW/m2

Average energy density: 5,4 J/cm2 (application time 12h)

Open Space

Single Desk 16x Sharp 4x 1x Sharp 4x

VIOLET INTEGRALIS

Designed by Carlotta de Bevilacqua SHARP 8X

↗ RADIOMETRIC RESULTS

Antimicrobial action mode

NIGHT MODE (Violet light only)

Single Desk

Irradiance: 2608 mW/m2

Average energy density: 11,3 J/cm2 (application time 12h)

Open Space

16x Sharp 8x 1x Sharp 8x

UVC INTEGRALIS + WHITE LIGHT

Driver 150mA SELV.

The 48 Vdc SELV power supply powers both the central white light channel and the UV-C channel. Consider the sum of the powers for the sizing of the power supply.

DUAL FUNCTION LINE RECESSED*

White Light MacAdam 3SDCM

Life L80 (9K) 50000h CRI = 90

* For professional use only - read the instruction sheet carefully. Installation must only be performed by qualifed personnel. Coordination with environmental safety systems and sensors required.

* Availability: soon available

↗

UVC INTEGRALIS

DUAL FUNCTION LINE

Designed by Carlotta de Bevilacqua, Fabio Zanola

PHOTOMETRIC RESULTS

White Light mode DAY MODE

Single Desk

1x Dual Function Line

Open Space

16x Dual Function Line

UVC INTEGRALIS

DUAL FUNCTION LINE

Designed by Carlotta de Bevilacqua, Fabio Zanola

↗ RADIOMETRIC RESULTS SANIFICATION mode NIGHT MODE

Single Desk

Irradiance: 39 mW/m2

Average energy density: 35 J/m2 (application time 15min)

Open Space

16x Dual Function Line 1x Dual Function Line

Radiometric results for 500 lx illumination

WHITE-VIOLET INTEGRALIS

PURE INTEGRALIS

DAY MODE (application time 12h)

NIGHT MODE (application time 12h)

Radiometric results

WHITE INTEGRALIS

WHITE-VIOLET INTEGRALIS

PURE INTEGRALIS

VIOLET INTEGRALIS

Headquarters

Artemide S.p.A.

Via Bergamo, 18

20006 Pregnana Milanese (MI), Italy

Tel. +39 02 93518.1

Tel. +39 02 93526.1

Numero verde 800 834 093 (from Italy only) info@artemide.com artemide.com

Artemide S.p.A.

si riserva la facoltà di modificare, in qualunque momento e senza preavviso, le caratteristiche tecniche degli elementi illustrati nel presente catalogo.

Artemide S.p.A. reserves the right to change, at any time and without prior warning, the technical specifications of any product illustrated in this catalogue.

Artemide S.p.A. se réserve le droit de modifier, à n’importe quel moment et sans préavis, les caractéristiques techniques des éléments illustrés dans ce catalogue.

Artemide S.p.A. behält sich das Recht vor jederzeit und ohne Ankündigung die technischen Daten der im Katalog abgebildetem Produkte zu ändern.

Artemide S.p.A. se reserva la facultad de modificar, en cualquier y sin aviso previo, las características técnicas de los elementos ilustrados en el presente catálgo.

2024 updated version. V.6

For information regarding distributors and points of sale, please visit our website artemide.com or email: info@artemide.com