International Conference on Intelligent Computing and Systems
58
International Conference on Intelligent Computing and Systems 2017 [ICICS 2017]
ISBN Website Received Article ID
978-81-933235-5-7 icics.asia 10 – January – 2017 ICICS115
VOL eMail Accepted eAID
01 icics@asdf.res.in 28 - January – 2017 ICICS.2017.115
Experimental Investigation on MIG Welded Mild Steel Satheeshkumar Ponnusamy1, Prabhu Natesan2, Ramachandran K3 1,2,3 NSN College of Engineering and Technology, India Abstract: Gas Metal Arc Welding (GMAW) process is leading in the development in arc welding process which is higher productivity and good in quality. In this study, the effects of different parameters on mechanical properties in mild steel that having the 6mm thickness of base metal by using gas metal arc welding will be investigated. The variables that choose in this study are arc voltage, welding current. The arc voltage and welding current were chosen as 22, 23, 24 and 25 V and 110, 120, 130 and 140 A respectively. Their effects are investigated in terms of mechanical properties using tensile, Brinell hardness, and Charpy impact test
ISBN Website Received Article ID
978-81-933235-5-7 icics.asia 10 – January – 2017 ICICS116
VOL eMail Accepted eAID
01 icics@asdf.res.in 28 - January – 2017 ICICS.2017.116
Analysis and Experimental Investigation of Mechanical Vibration in Switched Reluctance Motor 1,2
Nandhini K1, Gomathi P2 NSN College of Engineering and Technology, India
Abstract: Electric motor or the hybrid electric vehicle of switched reluctance motor has the wide torque and speed range. Due to the flux strengthening and magnetic saturation, double salient structure causes the high range of torque ripple, mechanical vibration and acoustic noise. This severe can be overcome by using different control techniques like conventional PI control which are efficiency and cost effective. The control of torque ripple by using both controller techniques are simulated by using Matlab/Simulink and the outcome of mechanical vibration and acoustic noise from both the controller gets analyzed in Graphical programming language, LabVIEW tool. This graphical language gives the efficient and accurate results in terms of mechanical vibration and acoustic noise.
This paper is prepared exclusively for International Conference on Intelligent Computing and Systems 2017 [ICICS 2017] which is published by ASDF International, Registered in London, United Kingdom under the directions of the Editor-in-Chief Dr M Sivaraja and Editors Dr. Daniel James, Dr. Kokula Krishna Hari Kunasekaran and Dr. Saikishore Elangovan. Permission to make digital or hard copies of part or all of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage, and that copies bear this notice and the full citation on the first page. Copyrights for third-party components of this work must be honoured. For all other uses, contact the owner/author(s). Copyright Holder can be reached at copy@asdf.international for distribution.
2017 © Reserved by Association of Scientists, Developers and Faculties [www.ASDF.international]
`