JASP0007_Sherwood_6pg 12/6/04 3:12 PM Page 1
A DIVISION OF JASPER SEATING COMPANY, INC.
SHERWOOD P.O. BOX 31, 8084 W. COUNTY RD. 25S ¥ FRENCH LICK, IN 47432 ¥ 888-440-8205 ¥ 812-936-9977 ¥ FAX 812-936-9979 ¥ www.jasperseating.com
JASP0007_Sherwood_6pg 12/6/04 3:12 PM Page 2
SHERWOOD is not just shelving. It is a complete storage and display system for books, periodicals, and other media, with a wide variety of visual and functional options. Standard selections are oak and maple. Cherry and walnut are available upon request.
SD4224BC-S-MB Double Face Shelving Unit in Maple with Mobile Base
Mobile Shelving Base Option Mobile shelving units provide the ability to easily reconfigure library spaces.
SD4810BC Single Face Low Shelving Unit in Oak SD7210BC Single Face High Shelving Unit in Oak Modular shelving using standard starters, adders, and transitional height adaptors gives the library planner the ability to design for every condition.
JASP0007_Sherwood_6pg 12/6/04 3:14 PM Page 3
SD6012BC-S Single Face Starter Unit in Cherry SD6012BC-A Single Face Adder Unit in Cherry SD1272CT Continuous Top in Cherry, Edge ÒIÓ
EDGES
Sherwood Standard Edge Continuous tops are available in standard widths and lengths, with a wide variety of edge detail options, as shown below.
Edge ÒBÓ
Edge ÒCÓ
Edge ÒEÓ SD7212BC-S Single Face Starter Unit in Maple Edge ÒHÓ
Edge ÒIÓ
SD7236FG Framed Glass Door Option Elegant wood framed glass doors (shown), sliding glass doors, or hinged wood doors are available as standard options.
JASP0007_Sherwood_6pg 12/6/04 3:23 PM Page 4
SD1236MGS-M Metal Magazine Shelf SD36NP Newspaper Rod Insert
P A G E : T R I M
Sleek powder coat finished metal shelves are a standard option, and are interchangeable with standard solid wood shelves. Hanging rods store newspapers in a neat and visible fashion.
F O L D - O U T
SD1236BCS-M Standard Metal Shelf
A T L E A S T 5 / 8 " I N
Combinations of wood finishes and metal colors help to create dramatic, inviting, and visually interesting displays. Wood veneer or melamine back and center panels are standard options.
F R O M E D G E
SD4212BC-S Single Face Starter Unit in Oak
T O
SD4212BC-A Single Face Adder Unit in Oak
A V O I D
SDHTBS Hanging Triangular Book Support SD36HB Hanging Bag Rack
P U N C H H O L E S
Additional accessories accommodate different types of items which are often housed in shelving units. Easily adjustable hanging book supports help keep books organized. Sturdy metal rods support hanging bag kits.
888-440-8205 짜 812-936-9977 짜 FAX 812-936-9979 짜 www.jasperseating.com
SD4824PB-S-AP Double Face Picture Book Shelving in Maple Adjustable metal book supports allow for easy and flexible picture book arrangements on every shelf. Arched shapes and decorative appliquŽs are available on all Sherwood end panels.
F O L D - O U T
P A G E :
T R I M
A T
L E A S T
5 / 8 "
I N
F R O M
E D G E
T O
A V O I D
P U N C H
H O L E S
JASP0007_Sherwood_6pg 12/6/04 3:24 PM Page 5
SD7212MG-S Single Face Magazine Starter Unit in Maple SD7212BC-A Single Face Adder Unit in Maple SD36NP Newspaper Rod Insert Easily manageable magazine shelves swivel up and stay up so that back issues can be easily retrieved or replaced. Different types of displays can be incorporated into standard shelving units.
888-440-8205 ¥ 812-936-9977 ¥ FAX 812-936-9979 ¥ www.jasperseating.com
JASP0007_Sherwood_6pg 12/6/04 3:24 PM Page 6
Sherwood is a complete shelving system designed to be modular and flexible. Sherwood is available with a wide variety of options and accessories both in visual design detail and in performance. A large number of wood finishes is available. All major plastic laminates are standard product for Jasper Library Furniture.
Single Face Bookcase Shelving SD6012BC-S
Double Face Bookcase Shelving SD6024BC-S
Framed Glass Doors SD3036FG
Single Face Magazine Shelving SD6012MG-S
Double Face Magazine Shelving SD6024MG-S
Hinged Wood Doors SD3036HW
Single Face Picture Book Shelving SD6012PB-S
Double Face Picture Book Shelving SD6024PB-S
Hanging Triangular Book Support SDHTBS
Jasper Library Furniture, A Division of Jasper Seating Company, Inc. P.O. BOX 31, 8084 W. COUNTY RD. 25S ¥ FRENCH LICK, IN 47432 ¥ 888-440-8205 ¥ 812-936-9977 ¥ FAX 812-936-9979 ¥ www.jasperseating.com JLFÐSD0904PS2.5
Specifications GENERAL CONSTRUCTION: Sherwood shelving is a modular starter/adder design which allows for easy reconfiguration. END PANEL: The end panels shall be constructed of 1" thick multi-ply veneer core for excellent dimensional stability. The face veneers shall be Grade "A" quality. Single faced end panels up to 60" high shall be banded on the bottom, top and front vertical edge with 1/4" solid hardwood. Single faced end panels more than 60" high shall be banded on the bottom edge and the front vertical edge with 1/8" solid hardwood. Double faced end panels up to 60" high shall be banded on all four sides with 1/4" thick solid hardwood. Double faced end panels more than 60" high shall be banded on the bottom and both vertical edges. All solid hardwood edges shall be eased. The inside faces of the end panels shall have two rows of holes bored to accept the shelf pins. The holes shall be 32 mm on center. The bottom and top of the end panels shall be fitted with threaded inserts for metal to metal assembly of the base and cornice top. The end panels shall be grooved to accept the 1 /4" thick back panel. INTERMEDIATE PANEL: The intermediate panels shall be constructed of 1" thick multi-ply veneer core for excellent dimensional stability. The face veneers shall be Grade "A" quality. Single faced intermediate panels up to 60" high shall be banded on the bottom, top and front vertical edge with 1/4" solid hardwood. Single faced intermediate panels more than 60" high shall be banded on the bottom edge and the front vertical edge with 1/4" solid hardwood. Double faced end panels up to 60" high shall be banded on all four sides with 1/4" thick solid hardwood. Double faced end panels more than 60" high shall be banded on the bottom and both vertical edges. All solid hardwood edges shall be eased. The inside faces of the end panels shall have two rows of holes bored to accept the shelf pins. The holes shall be 32 mm on center. The bottom and top of the end panels shall have through holes for attachment of tops and bases by means of 1/4" bolts, nuts and washers. The intermediate panels shall be grooved to accept the 1/4" back panel. CORNICE TOP: The cornice top shall be constructed of 1" thick multi-ply veneer core with Grade "A" face veneers. The front edge shall receive a 3/4" thick x 1 1/2" high fascia. The fascia shall be recessed 1/8" from the front edge and attached to the top by means of three (3) #10 x 2" flat head wood screws. The cornice top shall be attached to the vertical panels by means of four (4) 1/4" steel bolts threading into the embedded metal inserts. SHELVING BASE: The base frame shall be constructed of 3/4" thick plywood core. The base front shall be faced with Grade "A" veneer. The four sides of the base shall be attached by means of metal corner brackets and wood screws forming a frame. The base shelf shall be 1" thick plywood core with Grade "A" face veneer. The leading edge of the shelf shall be banded with a 1/4" thick solid hardwood band. The base shelf shall be attached to the base frame by means of a 1 1/2" long #8 wood screw for added structural stability.
STANDARD ADJUSTABLE SHELF: The adjustable shelves shall be 3/4" glued up hardwoods of the same specie front to back. The front edge shall be eased. The underside shall be routed to accept the shelf pins. STANDARD MAGAZINE SHELF: The magazine shelves shall be constructed of 3/4" veneer core with Grade "A" face veneers. The bottom edge shall be solid hardwood shaped to provide a retainer to allow display of the periodicals. The shelves shall be able to retract into the shelving unit and stay in place in this position without having to be held for easy access to back issues. When the shelf is in the display position, it shall rest against the standard adjustable shelf. STANDARD PICTURE BOOK SHELF: 5 dividers per shelf. OPTIONAL METAL SHELF: The optional adjustable metal shelf shall be 18 gauge steel. The shelf shall be 3/4" high with the front and rear edges being square formed. The ends of the shelves shall be notched to accept the shelf pins. The shelves shall be electrostatically painted. STANDARD BACK PANEL: The standard back panels shall be /4" thick with a vertical grade laminate face.
1
OPTIONAL VENEER BACK PANEL: The optional veneer back panel shall be 1/4" thick plywood with rotary cut face veneer on exposed face(s). OPTIONAL CONTINUOUS TOPS: Continuous tops are available for all shelving units. The catalog numbers must be specified to indicate this selection. All tops are 1 3/16" thick. OPTIONAL MOBILE BASE: The optional mobile base is available on the double faced shelving units. It shall be constructed of 16 gauge steel and shall be welded to form a structural frame. The swivel casters shall be bolted to the frame, which is attached to the underside of the shelving unit. CORNER FILLERS: The corner fillers shall be constructed of plywood core with a Grade "A" veneer face. Solid hardwood cleats shall be provided for attachment to the shelving and the wall. The depth and width is to be specified at time of purchase order. FACE FILLERS: The face fillers shall be constructed of plywood core with a Grade "A" veneer face. Solid hardwood cleats shall be provided for attachment to the shelving and the wall. The height and width is to be specified at time of purchase order.