Muck Spreaders

and feature a protected two-piece driveline with a PTO and slip clutch as standard.

The rear discharge machine has large diameter tyres (580/70R38) to minimise any ground pressure and is fully equipped for road use with hydraulic brakes, hand brake and lighting also standard.

The wide mouthed design of the main body allows for easier loading with modern telehandlers with larger buckets. It also enables the load to be increased to greater capacities. The introduction of body extensions alters the model number to refect the increased load capacity.

Additional options are available for all the West Maelstrom Spreaders including electric in cab controls for the bed chains, mudguards & weighing systems.

Six different models are available in the West Maelstrom Rear Discharge line up ranging from 8M3 up to an impressive 18M3 machine.

Hi-Spec slurry tankers meet all needs

The Hi-Spec tanker range includes a wide range of models with capacities from 800 gallons (3,600 litres) up to 5,000 gallons (22,700 litres), all available with numerous flling and other options, allowing you to tailor tankers to your specifc needs.

All Hi-Spec vacuum tankers are manufactured using high quality British steel and incorporate internal implosion rings and a collared dished end as standard to ensure the strongest possible construction.

All tanks are fully supported by the complete chassis frame and models are available with both standard or stepped recessed axles. The recessed axle lowers the centre of gravity, which not only improves stability both on the road and on undulating ground.

A number of flling options are available, including on larger tankers a 11,000 litres/ minute vacuum pump, flled via a 6 inch diameter Autofll arm hydraulically operated from the cab. The intake system can also incorporate a Vogelsang Rotacut 5000 chopping unit to avoid any potential blockage to the injectors caused by straw or silage in the slurry.

All the tankers can be supplied with a unique low profle spreading system with a spread pattern up to 12 metres wide. Alternatively they are suitable for use with a wide range of applicators, including the new Hi-Spec Trailing Shoe.

Available in working widths of 6.0, 7.5, 9.0 and 10.5 metres, the Hi-Spec trailing shoe features a robust chassis mounted mast which ensures that the tanker and shoe are perfectly balanced and that the shoe is properly supported to the tanker.

The 7.5m, 9.0m and 10.5m versions feature double folding to reduce the overall height for transportation. There is also the ability to use both fll points and splashplate at the rear without any modifcations.

The 9.0m and 10.5 trailing shoe also features a unique hydraulic self-levelling system, whereby each arm of the trailing shoe will lift as it passes over a side incline. This ensures that the shoe continues to work perfectly over the incline without excess pressure being applied to the

West Dual Spreaders, Models 1300 - 3000 Capacities ranging from 7T - 16T

West Rear Discharge Spreaders, Models M8 - M18 Capacities ranging from 8T - 16T

Harry West (Prees) Limited

offce 01948 840465 • email sales@harrywest.co.uk • web www.harrywest.co.uk

A wide range of spreaders available from Joskin

Joskin has got the widest range of muck spreaders starting with an 8m3 Siroko single axle model designed for small farmers to 25m³ muck spreaders with TORNADO3 and Ferti-SPACE2 available on single double or triple axle designed for big farmers and contractors. To better suit all types of customers Joskin has designed different types of beaters : vertical and horizontal.

The vertical beaters available on models from 8m3 up to 25m3 have been designed for customers who want to spread heavy matter with homogeneity on wide surface. The horizontal beaters available on the TORNADO3 and Ferti-SPACE2 from 14m3 and more have been designed for customers who want to spread light and dry matter and be as accurate as possible on spreading width up to 25m.

Both TORNADO3 and Ferti-SPACE2 are designed for heavy duty work standard ftted with the highest grade of steel and gearboxes/transmition with wide spinning discs and beaters they however are different. The TORNADO3 is designed with a narrow body and wheels on both sides of the body allows to have a low gravity centre and get the spraying table as close to the ground as possible to be as homogeneous as possible with light matters. The FertiSPACE2 has been designed with a wide body and wheels mounted underneath the body to increase the stability of the machine.

Those different models are now available under the name ADVANTAGE. This new concept is based on the « mass » production on dedicated production lines of high end machines at best price. Thanks to the purchase of large quantity of raw materials and an effcient organisation of the working forces Joskin is now able to offer different spreading solutions to better suit any customer during the year.

Rolland’s Rollforce range of muck spreaders

The Rolland Rollforce range includes seven models offering 13cu m to 22cu m capacities with three different side heights to choose from. These being 1230mm, 1550mm or 1700mm.

Inside the spreaders there are no angles for material to get stock in as the strengthened 16mm thick chains are now closer to the sides, while channel slats make for smoother emptying.

The drive has also been strengthened with wider bearing blocks. A new rear door design all means there are no corners to resist flow when opening and the front viewing