Advanced Mixing Unit Desired By Concrete Plants

Page 1

Atlas Industries

Advanced Mixing Unit Desired By Concrete Plants


Atlas Industries manufactures concrete plants. It uses twin shaft mixers as a mixing device. Twin shaft mixers used in concrete plants are in the range of 0.5 m3 to 6 m3. which is suitable to mix any type of concrete with aggregates up to 80 mm. Twin Shaft Mixers are designed to ensure reliability, reduced service, and maintenance costs.

Twin Shaft Mixer: Twin shaft mixers manufactured by Atlas. It is very accurate low on maintenance cost. The mixing tank is covered with special anti-wear liners. These liner plates are easily replaceable. The mixing action in a twin shaft mixer is performed by CI make paddles. These paddles are designed so as to provide optimized mixing results in a short time. All the paddles are bolted onto the mixing arms. These mixing arms are bolted onto the mixing shaft. This allows easy maintenance and service of the arms and tips of twin shaft mixers. The twin mixing shafts have roller bearings and seals on both ends. The position of the seals is that it can be easily replaced.


SEMI AUTO GREASING SYSTEM OF CONCRETE PLANTS: Twin shaft mixers manufactured by Atlas Industries. It is provides option of greasing all the moving parts of the twin shaft mixer by a single point. By using a grease gun pump, required amount of grease can be pumped to all the points so that the mixer works smoothly.

PLANETARY GEAR BOXES – CONCRETE MIX PLANTS: Twin-Shaft mixers by Atlas are not only designed for productivity, but also for long term reliability and low maintenance. Hence the reason we use planetary gear boxes in the twin shaft mixers. One of the main advantages of using planetary gearboxes is that these planetary gearboxes are connected to the main shaft with gear coupling which virtually eliminates the transmission of any possible force from the mixing shafts to the reducer output shafts, thus increasing the life of a twin shaft mixer. Bearings for the mixing shafts are installed on separate housing and its position is isolated from the concrete mixer seals, protecting the bearings in case of seal failure and making the maintenance easy.


â—?

DISCHARGE DOOR

The mixer discharge gate is driven by a pneumatic cylinder. The discharge door has a nylon seal that runs along its full perimeter. The eccentric rotation of the door sector guarantees that the nylon seal is always reached and compressed despite its wear and tear.


TOP COVER: The high top cover is equipped with two hinged hatches. The top cover allows easy access to the mixer for an accurate cleaning at the end of the shift. The high top cover also allows easy maintenance during preventive and unscheduled maintenance. This results in a shorter shutdown period of the concrete mixer plant. More Information for visit My Website>>https://www.atlasindustries.in/


Contact US Atlas Industries Pvt Ltd Address: Plot No. 14, 1, GIDC-II, Dediyasan, Mehsana, Gujarat 384002, India For export inquiries: +91-97238 10565 For domestic inquiries: +91-98240 40565 Website: https://www.atlasindustries.in/ Email : contact@atlasindustries.in


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.