VENTILATION SOLUTIONS FOR MOULD AND DAMP WITHIN HOMES

Based at its headquarters in Bristol, for over 25 years Addvent has been renowned for offering one of the widest ranges of innovative and stylish ventilation products across the domestic, commercial and industrial sectors. A market leader in the fan and ventilation equipment market, Addvent manufactures an array of extract and supply fans for different purposes, and continues to innovate with evermore impressive solutions.

Addvent’s latest innovation comes in the form of its Single Room Heat Recovery Unit, which was designed specifically as a solution to the increasing issue of damp and mould within our homes, which is more prevalent than ever.

According to recent figures, almost 70% of homes in the UK are affected by damp or mould, with 5% of these being deemed to pose a serious and immediate risk to the health of those occupying the property. Consequently, there is now more than ever a need to remove stale and moist air from our homes to prevent the accumulation of unwanted damp and mould.

So, what causes damp and mould?

This microorganism is mostly accredited to poor indoor air quality (IAQ) which often results in over 900 chemicals, particles, and biological materials thriving within the walls of our homes.

Further, this results in IAQ being five times worse than that of the outdoor air provided by our surrounding area. This –combined with the current climate and

Addvent AVHR50

Therefore, if you discover excess water build-up, musty smells, or black mould within your property, upgrading your ventilation unit should be top of your priority list. Failing to do so could result in some serious health conditions and even amount to fatalities amongst those of our younger generation.

However, Addvent’s brand new Single Room Heat Recovery Unit provides the solution.

The AVHR50 is one of the most intelligent, efficient and cost saving products within Addvent’s range and is worthy of this praise based on its easy installation and outstanding performance.

The brand New Addvent Single Room Heat Recovery Unit provides a continuous flow or fresh warm air to the room and then extracts stale air from the room while retaining the heat, ready again to supply heated fresh air back to the room.

The Addvent AVHR50 retains up to 93% of the heat that would normally be wasted by a conventional extractor fan, which has huge heating cost benefits.

Additionally, it provides higher levels of indoor air quality by filtering the air and removing dust particles that circulate around the home. This is a gentle process which is carried out by the absorption of the unit’s recycling core which then reverses, collects the recycled heat, and supplies fresh air back into the room. Recycling heat in this way through Eco-Ventilators is growing fast in popularity, and homeowners have already saved money while fighting climate change.

Some of the key product features of the Addvent single room heat recovery unit include:

Easy installation and maintenance

Provides a constant extract and supply up to 50m3/hour

Recycles up to 93% of the heat that is normally wasted with conventional extractor fans

Extremely low running costs with energy consumption down to 1.5W per unit

Silent running – 12dB(A) noise level

Acoustic external wall vent that dampens external noise and drafts

Prevents condensation, mould and humidity control for every room in your home

Stylish contemporary flush-fit design that would fit into any modern home

Maximum room size 20m2

Now more than ever, Addvent is striving to provide the highest quality products within the marketplace whilst keeping energy bills down. The AVHR50 consumes just 2W of electricity and, pairing this with its ability to recycle 93% of heat, makes this product a non-negotiable when considering cost efficiency. On average, a typical customer will cover the costs of their original investment within four years of purchasing this single room heat recovery unit.

The Addvent Single Room Heat Recovery unit is also simple and easy to install – it’s a straight through the wall solution that just needs a power connection, making it far easier to install than a centralised system that requires ducting throughout a property.

To further help support the Single Room Heat Recovery ventilation solution, Addvent provides a free ventilation design service – a valuable resource to all its customers.

The free design service is part of Addvent’s commitment to provide electrical contractors with industry leading specialist support. The ever-growing demand for ventilation products has seen Addvent expand its commitment to its customers.

The company’s success in customer service has come from close, personal contact, and significant investment continues to be made in technology and logistical systems for even faster response.

This is further supported by after sales support by a team of high-calibre staff to help customers with their needs, supported by an up-to-the-minute sales processing system and state-of-the-art logistics.

A telesales team based in Bristol backs up a specification sales force covering the whole of the UK, providing expert advice to electrical contractors and end users.

The high level of customer service, together with nationwide distribution, ensures that Addvent’s customers get the right products when and where they want them. As a leading brand, Addvent maintains a presence at major industry forums to regularly introduce new products and innovations to local authorities, housing associations, commercial specifiers and electrical contractors. Addvent, addvent.co.uk