CPY Series

PLUS - Cree CPY Series

Beautiful aesthetics, rugged construction

With optimum illumination and clean architectural blending, the CPY Series delivers impressive first impressions for visitors, while also promoting safe and secure exteriors for pedestrians, putting your facilities in a whole new light.

Dramatic lighting, operational savings

By blending technological innovation with architectural aesthetics, the CPY250 ® LED Canopy Luminaire achieves superior illumination performance with a low total cost of ownership and dramatically better visibility.

Easy installation

Designed for ease of installation and versatility, the CPY250 ® LED Canopy luminaire can seamlessly mount directly to virtually any canopy. Cree ® recessed canopy and soffit luminaires efficiently light the way to exterior sites, surrounding areas and interior high-bay applications leading to an overall low total cost of ownership.

Maximize the payback you expect

Cree ® LED luminaires are built to last and will save the municipality service team up to 10 years of relamping. Adopting an additional luminous flux control system that allows to adjust the lighting levels throughout the whole installation based on the varying required lighting needs throughout the night, it was possible to anticipate a reduction in annual energy use of 70%, all while transforming the neighborhoods with uniform white light.

DRAMATIC LIGHTING, OPERATIONAL SAVINGS

By blending technological innovation with architectural aesthetics, the CPY250 ® LED Canopy Luminaire achieves superior illumination performance with a low total cost of ownership and dramatically better visibility.

FLAT LENS

• Tempered textured glass • Increased customer visibility of the site • Helps in delivering a comfortable safe visual environment

STATE-OF-THE-ART CREE LEDS

• Industry-leading LED portfolio • High performance and proven reliability • Optimized for lighting applications

DROP LENS

OPTIONAL MULTI-LEVEL

• Reduced light levels and energy costs when the coverage area is vacant • Ambient and occupancy control

QUICK AND RELIABLE INSTALLATION

• Integrated driver • Self-sealing screws • Mounts to virtually any canopy deck

SUPERIOR THERMAL MANAGEMENT

• High performance heat sink • Improves lumen performance and reliability

AVAILABLE MOUNTING OPTIONS

STANDARD:

DIRECT MOUNT

Mounts directly to the canopy deck in a 51mm to 102mm round hole and is secured in place with self-sealing screws.

ACCESSORIES:

BUSWAY MOUNT

Stainless steel kit for surface/ busway mounting

RECESSED MOUNT

Retrofit kit for recessed mounting

A Flat lens

D Drop lens

FEATURES

Flat lens for diffused emission and Drop lens for intensive emission Input Power: A = 65W, B=94W, E=140W Lumen output: 7800 – 19300lm Efficacy: Up to 140lm/W CCT: 4000K, 5700K (CRI Minimum 70) Initial Colour Consistency: 4 steps MacAdam Input Voltage: 220-240V Driver equipped with temperature sensor to preserve optimal working conditions Power factor: Up to > 0.9 at full load Lifetime: L80F10 Up to >160Khrs Ta=25°C (>160Khrs L80 IESNA TM-21) Surge protection: Up to 10kV CM/DM surge immunity according to EN 61000-4-5 and EN 61547 (Class I SPD equipped with LED signal) Operative Temperature: Input Power A: -40°C to +40°C (direct mount to plywood), -40°C to +45°C (direct mount to sheet metal); Input Power B - E: -40°C to +35°C (plywood), -40°C to +40°C (sheet metal) Insulation class: Class I Enclosure rated IP66 per IEC 60529 Cable type H07RN (Cable length Up to 10mt) Control options: Fixed Output, 1-10V Dimming, Sensor with remote control Easy mounting and servicing from below the deck LED Board equipped with integral ESD and Surge protection

CONSTRUCTION AND MATERIALS

Die cast, low copper <0,01%, aluminum alloy housing for long weathering and reliability with integral heatsink Flat lens is 3mm tempered Solite ® glass Drop lens is 4mm molded borosilicate glass Direct mount is suitable for use in single or double skin canopies with a minimum 102mm wide panels and a minimum 22 gauge, 0.7mm canopy thickness Direct mount luminaire mounts directly to the canopy deck with the drilling of a single 51mm to 102mm round hole, is secured in place with self-sealing screws that provide a weathertight seal and includes 19mm conduit entry for direct wire feed Exclusive Colorfast DeltaGuard ® finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion

WARRANTY AND CERTIFICATIONS

Limited Warranty † : 10 years on Colorfast DeltaGuard ® finish / 10 years on luminaire CE mark / CB mark / RoHs compliant Risk group exempt in accordance with Standard CEI EN 62471 for photobiological safety Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117 Compliant to: EN 60598-1; EN 60598-2-3