Eurochef 8th web edition

Your Passion For Perfection EDITION 8

11 BUMBORAH POINT ROAD PORT BOTANY NSW 2036 AUSTRALIA EMAIL: eurochef@eurochefaus.com WEB: www.eurochefaus.com

FOR DETAILS OF YOUR NEAREST SUPPLIER PLEASE CONTACT US FOR DETAILS OF OTHER EUROCHEF OUTLETS AND OUR PROJECTS DIVISION PLEASE SEE PAGE 212 The products in this catalogue are manufactured by the Matfer Bourgeat Group, Demarle, Tiger and SEF. The products are held in stock in our Sydney warehouse unless otherwise marked.

Matfer and Bourgeat have headquarters in Paris with factories in Normandy and Lyon, Demarle in Northern France & Tiger in South Korea.

Matfer and Bourgeat have been manufacturing premium products since 1814 and are involved in continuous research and development. An example being the use of Exoglass® to manufacture new individual pastry and bread moulds.

In this edition we are pleased to launch a range of new buffet ideas from Tiger.

INDUCTION COOKING

INDUCTION • Immediate control of temperature • Heating energy only on when a pan is present • Energy consumption is reduced

• Only the pot heats up so safety is increased • Changes in heat level are immediate and without time lag • The correct type of cookware or Chafing Dish must be used

Induction

95%Efficiency

2

Electric

55% Efficiency

Gas

50% Efficiency

INDUCTION MATFER INDUCTION COOKTOP 1.8KW

Powerful and compact. Nine level settings for precise control of power.

Ceramic glass surface 4mm thick. Stainless Steel body. 230 volts - 50Hz. Can use pans from ø140 to ø280mm in diameter.

New Waterproof panel with soft touch controls CODE

LxW

H

240302

305x305

80

MATFER INDUCTION COOKTOP 2.8KW Ultra Slim for buffets, bakeries etc 4mm vitroceramic top for pans ø140 to 280mm

240306

460x365

80

MATFER WOK INDUCTION 2.5KW

Power 2.5Kw with booster 3.2Kw. Stainless Steel body. Vitroceramic glass top, 6mm thick.

10 Levels of power. Removable air filter. New Waterproof Panel with soft touch controls.

Use with Bourgeat Wok - Code 686735 on Pge# 31

240322

500x365

175

3

INDUCTION ANOTHER ADVANTAGE...

All the units are protected from overheating.

This is done in two ways, if the electronics overheat due to poor ventilation, or if the pan overheats for over a minute, the unit will protect itself by turning off. All units have variable power settings from 50ยบC to 230ยบC

TABLE TOP INDUCTION COOKER 2.5KW CODE

LxW

H

800101

PLATE 273 x 273

4

UNIT 328 x 422

100

TABLE TOP INDUCTION COOKER 3.5KW

CODE

LxW

H

800103

PLATE 300 x 300

6

UNIT 385 x 520

178

4

INDUCTION IMPORTANT NOTE...

When using induction ventilation is vital, it is important to: • Ensure that the air intake and air exhaust are kept free from obstruction.

• Follow the installation/use manual provided or call us for assistance.

• For built in units, it is strongly recommended that the intake is separated from the exhaust using a divider. Please call for advice.

BUILT IN INDUCTION COOKTOP CODE

KW

LxW

H

800110

1KW

385 x 360

100

800104

2.5KW

385 x 360

100

800106

2KW

385 x 360

100

TABLE TOP INDUCTION WOK UNIT

Use with Bourgeat Wok - Code 686730 or 35 See page 31

CODE

KW

LxW

H

800102

2.5KW

150

800107

3.5KW

385 x 480

385 x 520

223

5

HEADING INDUCTION Indent • 2 and 3, ZONE Induction • MULTIZONE

Seperate Generators BUILT IN INDUCTION

Offering a continuous look powered by seperate generators 800114 800116

2 x 2KW Glass 800 x 380 3 x 2KW Glass 1180 x 400

MULTIZONE

Multizones allowing smaller dishes placed randomly 800201 2 x 2.5KW Glass 800 x 380 800301 3 x 2.5KW Glass 1180 x 400

6

HEADING INDUCTION TIGER WARMERS

DOMINO INDUCTION SYSTEM CODE 011762

COMPLETE WITH S/S FRAME

011121

390x390x65 1 KW

ANTI SLIP MAT 011759

263Ø x 2mm

(please note that these units are NOT suitable for cooking they are designed to keep your food hot)

7

HEADING INDUCTION-DOMINO INDUCTION PLATFORM 600W SQUARE Complete

INDUCTION PLATFORM 600W RECTANGLE Complete

STAND SQUARE

STAND RECTANGLE

8

LxW

H

011122

305x350 110

011123

618x383 110

019405

350x350 103

019402

250x250 103

019406

615x350 103

HEADING DOMINO COLD STATION complete, no cover

ROLL TOP cover

CODE

Lx

H

019415

615x350

103

019927

575x355

216

019413

615x355

297

019411

615x350

118

019402

28ø

90

BREAD BASKET (basket only)

BREAD BOARD (board only)

EXTENSION LEGS SET 4

9

DOMINO HEADING CODE

LxW

011511

255x200

30

018100

526x325

18

DOMINO MILK DISPENSER

019404

250x324

3.5Ltr

458

DOMINO JUICE DISPENSER

019403

250x330

5Ltr

434

ICE PACK

Suits the Tiger cold station

Ltr

H

TRAY S/S

Suits Tiger Stand Rectangular

with ice tube

with ice tube

10

DOMINO HEADING BUFFET DISPLAY BLACK

CODE

LxW

H

019437

615x250 103

019436

615x250 103

BUFFET DISPLAY OPAQUE

EXTENSION LEGS SET 4

019402

28ø

90

11

HEADING Induction Chafing Dishes

T Collection

Features a revolutionary infinite stop hinge.

Three colour accents.

Stackable stands can hold our 600Watt induction.

Counter handle for easy and safe handling.

Accent piece is removable for easy cleaning.

CODE

Ltr

L

W

015800C

6.5

560

480

015801

6.5

560

480

560

480

BLACK ACCENT

015802

6.5

ROSE GOLD ACCENT

12

Induction Chafing Dishes STAND stackable CODE

015803 The optional stand allows the use of fuel or the attachment of our magnetic 600W Induction See page 7

13

ACCESSORIES CODE

LxW

Ltr

ROUND INSERT PORCELAIN 011214 330 4.5 011204 390 6.5

H

70 70

011215 011205

DIVIDED 330 390

4.5 6.5

70 70

011202 011201

330 390

4.5 6.5

70 70

RECTANGLE INSERT PORCELAIN

GN2/3

011209

354x325

5

68

RECTANGLE INSERT PORCELAIN

GN1/3

011208

176x325

2.5

RECTANGLE INSERT S/STEEL GN2/3 742006

14

355x327

5.5

68

68

ACCESSORIES CODE

ø

Ltr

H

INSERTS FOR CHAFING DISHES S/STEEL 011202 011201

330 390

4.5 6.5

65 65

011221

DIVIDED 390

6.5

65

NOW SHIPPED AS TWO HALVES

SPRING ELECTRIC HEATER Suits all Chafing Dishes 011731

SOUP TUREEN S/STEEL 011500

240

5LTR

4.5 6.5

ADAPTING RING FOR SOUP TUREEN 011238 011228

330 390

To suit To suit

15

BUFFET

SMART W

SMART-W Round w/glass lid 015701 6.5 LTR ROUND L550xW480xH265 6.5Ltr 015702 4.5 ltr Small L495xW440xH260 4.5Ltr

SMART-W Round Stand 011263 To suit 6.5 Ltr

011264 To suit 4.5 Ltr + Soup Urn 10Ltr

16

SMART-W Square w/glass lid 015700 L560xW480xH300 5.5Ltr

SMART-W Square Stand 011265

BUFFET

SOUP URN 7Ltr

016700 Induction unit not included

HEAT LAMP S/S 275Watt 019417 204x375x725

SOUP URN 10Ltr 016800

Induction OR optional Stand 011264

ODIN MINI SAUCE CHAFING DISH 019420 235x235x310 (with porcelain insert)

17

STACKINGHEADING ROLL TOP CHAFERS

‘IBIS’ RECTANGLE CHAFING DISH 017510 L740xW580xH390 Weight 16.82Kgs

‘IBIS’ ROUND CHAFING DISH 017610 L585xW580xH380 Weight 13.34Kgs

IBIS HANDLING TROLLEY

HANDLING TROLLEY 022888

COVER TO SUIT 022889

18

HEADING INSULATED JUGS VACUUM JUGS BY TIGER Vaccuum insulated.

Material is all Stainless Steel 18/10.

180ยบ opening lid Rubber seal CODE

VACUUM JUG 400ml

010620

VACUUM JUG 700ml

010720

VACUUM JUG 1000ml

010820

VACUUM JUG 1500ml

010920

CAPACITY

H

400ml

170

700ml

180

1000ml

190

1500ml

200

19

COLD DISPLAYS COLD DISPLAYS

A practical and elegant way to keep food cool on your buffet

FEATURES Stainless steel one piece stamped Base Food can be placed on the stainless steel tray supplied with 2 cold blocks CODE

LxW

H

018920

648x400

280

011512 YOGURT TOP 011511 ICE PACK

COLD STATION FEATURES Stainless steel one piece stamped base Food can be placed on the hardened glass plate or serving dish supplied with a -12ยบC cold block

20

CODE

LxW

H

870830

600x400

255

826003 826004

530x325 530x325

-3ยบC -12ยบC

BUFFET

CARVING STATION

FEATURES Stainless Steel One piece stamped Base Direct Heating on Aluminium Factory Set holding temperatures Connection lead 1.5Mtr CODE

LxW

H

870851

590x415

470 1100W

SAUCE CONTAINER CODE

LxW

H

870870

415x150

86

UTENSIL STAND CODE

LxW

H

870872

415x150

86

21

HEADING ‘SATINE’ BUFFET HOT PLATE

FEATURES Stainless steel one piece stamped base Compliant with current legislation on hot holding Factory set thermostat Connection lead 1.5Mtr long CODE

LxW

H

870840

600x400

52 385W

HEAT LAMP FEATURES This removable heat lamp is designed to fit the Satine Hot Plate giving additional heating from above Connection lead 1.5Mtr long 600W

22

CODE

LxW

H

870990

560x330

510

HEADING ‘SATINE’ BUFFET COLD STATION FEATURES

Stainless steel one piece stamped base Food can be placed on the hardened glass plate or serving dish CODE

LxW

H

870830

600x400

255

EUTECTIC PLATE (Cold block) GN 1/1 826003 826004

530x325 530x325

-3ºC -12ºC

HOT PLATE FEATURES Surface temp set at 90ºC Complies with regulations for food to be held at temps greater than 63ºC 870804

600x400

42

870801

530x325

42

23

HEADING TIGER TROLLEYS MODERN SERVICE TROLLEY

CODE

LxW

H

Kgs

020791-O Oak

101x51

85

40

101x51

85

40

880x500

840

40

30 years of Tiger tradition in craftsmanship.

Made of Veneered MDF, powder coated steel.

In an attractive oak finish.

Shelves can be adjusted.

020791-B Black An Excellent design from Tiger Made of Veneered MDF, powder coated steel.

In an attractive black”soft touch” finish.

Shelves can be adjusted.

PALACE SERVICE TROLLEY 020752 Walnut

Tiger’s traditional look trolley crafted in solid timber and veneered plywood, with s/s details The accessories on the following page make this a versatile piece.

24

TIGER TROLLEYS PALACE TROLLEY TOPS

CODE

LxW

H

CROWN CAKE ASSEMBLY 020057

880x500

524

CROWN FLAMBE ASSEMBLY W/ ONE BURNER

020058

875x495

180

25

HEADING ROOM SERVICE ROYAL ROOM SERVICE TROLLEY

CODE

LxW

H

Kgs

020783

101x51

85

40

39x37

49.5

An elegant clever design suitable for the best hotel suite Made from Melamine coated plywood, S/S with attractive casters including two with brakes

Fully folded the footprint is small but very stable.

The Hot Box locks in place for secure transport.

ROOM SERVICE HOT BOX S/S 011811 Stainless Steel Electric Hot Box 230V 370W

26

HEADING ROOM SERVICE ROOM SERVICE CADDY

CODE

LxW

H

Kgs

020783

158x58

183

40

39x39

49

10.4

ROOM SERVICE CADDY Stainless Steel and powder coated black steel Suits the Tiger tables and hot boxes

ROYAL HOT BOX 011812 NEXT GENERATION HOT FOOD BOXES Digital temperature diplay.

Sophisticated PVD coated stainless steel with rounded edges Improved insulation for up to 40Mins autonomy 230V 365W

27

STACKABLE JUGS HEADING

Transparent polycarbonate, tough and light. Hot and cold resisitant Dishwasher safe 80% Space Saving.

Effective no drip lip and a flat base for quick drying.

The optional lid offers 2 positions, open for pouring and ice retention, closed offers dust protection.

SOLD IN CTNS 6

28

STACKABLE JUGS CODE

COLOUR

JUG 1 LITRE 663002 CLEAR 663012 BLUE 663032 RASPBERRY 663042 LIME 663052 TANGERINE

JUG 1.5 LITRE 663003 CLEAR 663013 BLUE 663033 RASPBERRY 663043 LIME 663053 TANGERINE

Ltr

1 1 1 1 1

125 125 125 125 125

180 180 180 180 180

130 130 130 130 130

200 200 200 200 200

CTN 6 1.5 1.5 1.5 1.5 1.5

CTN 6

073353 073357

CTN6 CTN6

CLEAR CLEAR

H

CTN 6

LID 2 WAY Dust and Ice

Ø

1

7

1. Stainless Steel Body compatible with all heat sources

4

2. ‘Sandwich’ ground aluminium base with shape memory for completely flat surface when cooking

5

3. Base coated with special magnetic stainless steel for induction cooking 4. Reinforced pouring rim 5. Watertight unbreakable welded handle 6. Silicon in the handle stops water ingress

6

2 30

3

7. NF and NSF certification for compliance with hygiene standards

EXCELLENCE COOKWARE Stainless Steel

WOK

Induction Based

CODE

ø

Ltr

H

686730 686735

300 350

4.0 5.0

100 100

200 240 280

2.0 3.6 5.5

65 80 90

120 140 160 180 200 240 280

0.6 1.0 1.6 2.2 3.1 5.4 8.6

60 70 80 90 100 120 140

1.8 3.0

70 80

SAUTE PAN 696020 696024 696028

SAUCE PAN 691012 691014 691016 691018 691020 691024 691028

SAUTE PAN FLAIRED 686520 686524

200 240

31

HEADING EXCELLENCE COOKWARE Stainless Steel ø

Ltr

H

5.5 8 12 16 23 32

90 105 120 130 150 165

240 280 320 360 400 450

5.4 8.6 12.8 18.3 25 36

120 140 160 180 200 225

240 280 320 360 400 450

7 11 17 24 34 47

160 185 215 240 270 300

CODE

SAUTEUSE PAN 697028 697032 697036 697040 697045 697050

280 320 360 400 450 500

LOW CASSEROLE 693024 693028 693032 693036 693040 693045

CASSEROLE 690024 690028 690032 690036 690040 690045

STOCK POT

694024 240 10.8 240 694028 280 17.2 280 694032 320 25 320 694036 360 36 360 694040 400 50 400 694045 450 72 450 694050 500 98 500 TAP AVAILABLE ON REQUEST Our 45 & 50 cm ø pots are not fitted with a magnetic base but with a very thick ground aluminium diffuser base for use with all heat sources except induction

32

EXCELLENCE COOKWARE CODE

ø

STEAM PAN LID

698024 698028

240 280

692014 692016 692018 692020 692024 692028 692032 692036 692040 692045 692050

140 160 180 200 240 280 320 360 400 450 500

Stainless Steel Ltr

H

5.5 8.6

120 140

FISH POACHER 017202

600 x 165

120

WHIPPING BOWL 1/2 SPHERE 703020 703025 703030 703035 703040

200 250 300 350 400

2 3.7 7.2 10.5 15.6

100 125 150 175 200

WHIPPING BOWL STAND 703019

Elastomer

33

HEADING Ceramic Non Stick

These Non Stick pans use a ceramic coating to provide an excellent non stick surface which is harder than traditional coatings and can withstand higher temperatures. They are PTFE and PFOA Free

CLASSIC CERAMIC Can be used on all hobs except Induction

CODE

Ø

H

200 240 280 320

40 40 45 55

250 280

20 20

665220 665224 665228 665232

200 240 280 320

40 40 45 50

666228

280

20

FRYPANS

675220 675224 675228 675232

CREPE PAN

676125 676128

ELITE CERAMIC For Induction

FRYPANS

CREPE PAN

34

Induction ‘Elite Chef’

4 layers non stick Heavy Duty Aluminium body 5mm, anti scratch undercoat.

Stainless Steel handles, suitable for all cooking methods including Induction They are PTFE and PFOA Free CODE

Ø

H

678520 678524 678528 678532

200 240 280 320

50 50 50 50

Induction ‘Elite Pro’ Extra thick body with 4 layers of Non Stick coating, Cast Stainless Steel Handle.

Aluminium base covered in magnetic Stainless Steel. Suitable for all cooking methods including Induction.

They are PTFE and PFOA Free

CODE

Ø

H

668524 668528 668532

240 280 320

50 50 50

Ep mm 5.5 5.5 7

35

Epoxy Coated Steel 150ºC

Handle fixed by 3 rivets

4 Coat Non Stick Interior

Aluminium Non Stick Frypans

Economic, professional, heavy duty pans with 4 layers of multi coat non stick surface developed by Bourgeat.

While some non stick coatings can be harmful to health all Bourgeat Non stick coatings are PFOA free Suitable for gas burners, electric hot plates and vitro ceramic hobs.

CODE

ø

H

Thickness

665612

120

20

3

250 280

20 20

3 3

BLINIS PAN

CREPE PAN 666125 666128

36

FRYPANS ø

H

Thickness

160 200 220 240 260 280 320 360 400

35 40 40 40 45 45 50 50 55

3 4 4 4 4 4 4 5 5

200 240 280 320

60 65 75 85

4 4 4 5

360

50

5

360 400 500

50 50 60

5 5 6

CODE

FRYPAN

665116 665120 665122 665124 665126 665128 665132 665136 665140

SAUTEUSE PAN 668220 668224 668228 668232

OVAL FRYPAN 667136

PAELLA PAN 664536 664540 664550

To Extend the life of your pans: - Use MATFER composite utensils PAGE 76-79 - Avoid stainless steel utensils - Do Not overheat pans - Clean with a non abrasive sponge.

37

Black Steel

These 2-3mm thick steel pans can be used on any heat source including Induction. They are heavy duty, high quality pans with Iron handles.

CODE

BLINIS PAN 062040

CREPE PAN 062031 062032 062033 062034

FRYPAN

062001 062002 062003 062004 062005 062006 062007 062008

OVAL PAN

062020

PAELLA PAN 062051

38

ø

H

Thickness

120

20

2.5

180 200 220 240

20 20 20 20

2 2 2 2

220 240 260 280 300 320 360 400

40 40 45 45 45 50 50 55

2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3

50

2-3

50

3

Copper

Stainless Steel clad copper line “Alliance” with Cast Iron handle.

Body 2.5mm thick, for any heat source except Induction.

CODE

FRYPAN

369024 369028

SAUTE PAN 372016 372020 372024 372028

ø

240 280

160 200 240 280

SAUCEPAN 360012 360014 360016 360018 360020 360024

H

50 55

1 1.9 3.1 4.9

50 60 70 80

160 200 240 280

0.9 1.8 3 4.7

60 70 80 90

120 140 160 180 200 240

0.7 1.2 1.7 2.4 3.3 5.4

65 75 85 95 105 120

CURVED SAUTE PAN 373016 373020 373024 373028

Ltr

39

COPPER POTS CODE

ø

OVAL FRYPAN 370036

SAUTEUSE PAN 374024 374028

360

30

3.1 4.9

70 80

367020 367024 367028

200 240 280

3.3 5.4 8

105 120 130

365020 365024 365028

200 240 280

COPPER CLEANER 720311 720312

40

H

240 280

CASSEROLE

LID

Ltr

150ML 1000ML

COPPER POTS Copper

Stainless Steel clad copper Elegance line with Brass handles Body 1.6 to 2mm thick, ideal for table service CODE

ø

Ltr

H

0.28

45

140 160 180 200

1.1 1.7 2.3 3.2

70 85 90 100

200 240

1.8 3

60 70

SMALL SAUCEPAN 351009

90

351209

90

SMALL SAUCEPAN LID

SAUCEPAN

034004 034005 034006 034007

SAUTE PAN

034010 034011

FRYPAN

034015 034016

OVAL FRYPAN 034018 034019

220 260

35 40

300 350

40 45

41

COPPER POTS CODE

SUGAR PAN 305016 305020

ROUND DISH 034040

FLAMBE PAN 032140

ø

Ltr

H

160 200

1.8 3.4

90 110

220

80

ZABAGLIONE BOWL 032130

JAM PAN

303036 304042

42

0.2

L260

160

1.4

380 400

9.5 15.8

130 180

4.5 7 11.2

130 150 180

EGG WHITE BOWL 032108 032110 032112

35

260 300 350

BOURGEAT WALL MOUNTED UTENSIL HANGING SHELF Code

Length

Width

Height

845608

800

400

300

An upper shelf for larger items Hanging bars and hooks under for saucepans skillets ladles etc Wall mounting should be carried out with the appropriate rawl plugs

GN PANS EN 631.1 GN certified 2/1

1/1

2/4

2/3

1/2

1/6

1/6

1/3 1/3

1/4

1/4

1/9 1/9 1/9

If you are cooking in an oven you need EN631.1 certified pans A complete range of full or perforated trays and lids which are compliant with the standard EN631 and compatible with all equipment as per standard EN631.2 (ovens, carts, etc)

FEATURES

- Reinforced corners and edges to resist buckling - Optimal weight and thickness - Suitable for cooking and freezing - Shaped corners ensure easy handling with trolleys and in ovens - Easy to clean - Better handling of food due to minimum contact - Edges have good aspect when used in self serve systems.

HEADING GASTRONORM EN 631.1 CODE

Ltr

H

GN 1/9 108x176

747006 747010

0.6 0.8

65 100

GN 1/6 176x162

746006 746010 746015 746020

1 1.7 2.2 3

65 100 150 200

GN 1/4 265x162

745004 745006 745010 745015 745020

1.1 1.7 2.5 4 5.2

40 65 100 150 200

GN1/3 325x176

744005 744006 744010 744015 744020

2.1 2.5 3.7 5.7 7.5

55 65 100 150 200

743002 743004 743005 743006 743010 743015 743020

1.2 2.5 3.3 4 6.2 9 12

20 40 55 65 100 150 200

GN 1/2 325x265

44

HEADING GASTRONORM EN 631.1 CODE

Ltr

H

GN 2/3 354x325

742004 742006 742010 742015 742020

3.5 5.5 8.7 13 16.7

40 65 100 150 200

GN 1/1 530x325

741002 741004 741005 741006 741010 741015 741020

3 5.8 8 9 13.5 20 28

20 40 55 65 100 150 200

GN 2/1 650x530

740002 740004 740006 740010 740015 740020

6.5 12 19 29 43 58

20 40 65 100 150 200

4 6.2 9

65 100 150

5.8 8 9 13.5 20 28

40 55 65 100 150 200

PERFORATED 743406 GN 1/2 743410 325x265 743415

PERFORATED 741404 GN 1/1 741405 530x325 741406 741410 741415 741420

45

HEADING GASTRONORM EN 631.1 CODE

Ltr

H

740410

16.5 19 29

55 65 100

PERFORATED GN 2/1 740405 650x530 740406

CONTAINER GRIP 749800

DRAIN PLATE

750001 750012

GN LID NO HANDLE 747700 747701 747712 747713 747714

GN LID W/HANDLE 748000 748001 748002 748012 748013 748014 748016 748019

L190

1/1 1/2

Ø 0.8 Ø 0.8

2/1 1/1 1/2 1/3 1/4 2/1 1/1 2/3 1/2 1/3 1/4 1/6 1/9

GN SPILLPROOF LID W/SILICON SEAL

46

748700 748701 748712 748713

2/1 1/1 1/2 1/3

HEADING GASTRONORM STORAGE Transparent food quality polypropylene containers 2.5mm thick & Graduated. Designed and made by Bourgeat in France.

Can be used in cold rooms and microwaves, temperatures range from -20ยบC to 100ยบC. Designed to stack within each other for minimal storage Air tight lids are included with each container CODE

Ltr

H

255310 255315 255320

1 1.5 2

60 85 110

GN 1/6 176x162

257315 257320

1.5 2

100 150

GN 1/3 325x176

257335 257350

3.5 5

100 150

GN 1/2 325x325

257360 257375

6 7.5

100 150

GN 2/3 354x325

257380 257312

8 12

100 150

GN 1/1 530x325

551024

18

150

FLEXIBLE RANGE GN 1/6 176x162 RIGID RANGE

47

HEATED TROLLEYS HEADING CODE SATELLITE GN30-2/1 840230 15 Levels GN2/1 230/240 volt 2.3 Kw 10 amp

SATELLITE GN30-2/1 With Humidification INDENT

20 Levels GN2/1 230/240 volt 2.9 Kw 15 amp

17 Levels GN1/1 230/240 volt 1.75 Kw 10 amp

48

Kgs

791x959

1521

120

791x959

1876

140

585x844

1575

90

840340

SATELLITE GN17-1/1 841217

SATELLITE GN17-2/1 With Humidification INDENT

H

841230

SATELLITE GN40-2/1 840240

SATELLITE GN40-2/1 With Humidification INDENT

LxW

840317

HEATED TROLLEYS HEADING Satellite 4G

4 programmes for quick setting plus a customisable ‘chef’ mode Internal walls with pressed one piece rails:, can be washed with low pressure jet (IP25)

º Ergonomic built in handles Excellent insulation properties assist in the correct temperatures being held with up to 20% savings on energy

Optional Glass door

49

HEATEDHEADING TROLLEY (Indent) CODE SATELLITE GN20-2/1 841220 10 Levels GN2/1 230/240 volt 1.75 Kw 10 amp

LxW

H

Kgs

791x959

1166

100

791x959

1848

140

547x821

690

50

585x844

1079

55

111x821

689

70

SATELLITE GN20-2/1 840320 With Humidification

SATELLITE GN16-2/1 840232 2 x 8 Level GN 2/1 230/240 volt 1.9 Kw 10 amp 2 Individual Cupboards

SATELLITE GN16-2/1

840332

SATELLITE GN6-1/1

843206

SATELLITE GN6-1/1

843306

With Humidification

6 Levels GN1/1 230/240 volt .95 Kw 10 amp With Humidification

SATELLITE GN10-1/1 842210 10 Levels GN1/1 230/240 volt .95 Kw 10 amp

SATELLITE GN10-1/1 843310 With Humidifiation

SATELLITE GN12-1/1 843212 2 x 6 Level GN 1/1 230/240 volt .95 Kw 10 amp

SATELLITE GN12-1/1 843312 With Humidifiation

50

HEADING REFRIGERATED TROLLEY (Indent) LxW

H

Kgs

10 Levels GN2/1 230/240 volt 0.5 Kw 10 amp

791x1130

1166

120

SATELLITE GN30-2/1 842030

791x1130

1521

140

SATELLITE GN40-2/1 842040

791x1130

1876

160

SATELLITE GN6-1/1

842006

752x765

727

65

SATELLITE GN3-1/1

842404

752x737

688

75

CODE SATELLITE GN20-2/1 842020

15 Levels GN2/1 230/240 volt 0.5 Kw 10 amp

20 Levels GN2/1 230/240 volt 0.5 Kw 10 amp

6 Levels GN1/1 230/240 volt 0.3 Kw 10 amp

3 Levels GN1/1 x 100mm 230/240 volt 0.3 Kw 10 amp

51

NAV’THERM HEADING An innovative system for the hot and cold transfer of food.

Both sections of the transfer trolley can be kept cool, the top section provides the reheating and holding automatically

The tactile controls are intuitive to use. The docking station has three programmable service times. The food is reheated according to safety requirements then held at ready for service

Rounded internal corners for easy and quick jet cleaning.

The trolleys are insulated to ensure the food maintains the correct temperature during service

The trolley locks onto the docking station

Optimal size and weight Practical handles quick opening and closing

52

Two trolleys offer 4+8 or 6+6 levels to suit your needs

NAV’THERM CODE

DIM

H

NAVTHERM DOCKING STATION 880001

557x591

1512

Voltage • 230/240V single phase50Hz Power • 4.6Kw Amperage 20Amps •

NAVTHERM TROLLEY 4/8 881600

698x686

1485

Capacity Top Unit

• 4 GN 1/1 H65 Capacity Lower Unit • 8 GN 1/1 H65 Space between shelves • 71mm Net Weight 100kgs • Interior Dim Upper • 438x540 H321 Interior Dim Lower • 438x540 H687 Lower basket is suitable for trays

NAVTHERM TROLLEY 6/6 881700

698x686

1485

Capacity Top Unit

• 6 GN 1/1 H65 Capacity Lower Unit • 6 GN 1/1 H65 Space between shelves • 71mm Net Weight 100kgs • Interior Dim Upper • 438x540 H508 Interior Dim Lower • 438x540 H508 Lower basket is suitable for trays

53

TRANSTHERM REHEAT AND HOLD

Permanent display and data security on front 2 RET cycles and 1 MET Timer with alarm for manual controlling or automatic control using the food probe.

Humudification Main functions are 2 RET cycles 140ยบC and 165ยบC and one 80ยบC holding cycle These cycles are secured to ensure compliance with applicable legislation

Removable handle for quick and safe handling of hot trolleys

54

The trace module allows data to be collected during the reheat and holding stages of the process. The data can be downloaded to a USB device The internal card storage can hold 260 hours of data

Radiated angles and smooth or pressed walls for easy cleaning NF food hygiene certified

HEADING TRANSTHERM CODE

LxW

H

TRANSTHERM GN10-1/1 891210

682x720

1430

HANDLING TROLLEY

894110

587x470

1254

TRANSTHERM GN15-1/1 891215

682x720

1835

HANDLING TROLLEY

587x470

1629

TRANSTHERM GN10-2/1 891220 795x1045

1430

10 Levels GN1/1 230/240 volt 8.7 Kw 12.5Amps 3 Phase

15 Levels GN1/1 230/240 volt 13.5 Kw 19.5Amps 3 Phase

894115

10 Levels GN2/1 230/240 volt 17.1 Kw 25Amps 3 Phase

HANDLING TROLLEY

894120

587x730

1254

55

TRANSTHERM HEADING CODE

LxW

H

5 Levels GN1/1 230/240 volt 3.5 Kw 15Amps 1 Phase

892205

682x720

845

TRANSTHERM GN10-1/1

892210

682x720 1430

GN10 OVEN WITH WHEELS 893210

682x720 1430

TRANSTHERM GN15-1/1

892215

682x720 1835

GN15 OVEN WITH WHEELS 893215

682x720 1835

TRANSTHERM GN5-1/1

10 Levels GN1/1 230/240 volt 8.7 Kw 12.5Amps 3 Phase

15 Levels GN1/1 230/240 volt 13.5 Kw 19.5Amps 3 Phase

56

TRANSTHERM HEADING 895105 FOOT ASSEMBLY Low foot assembly for GN5 code number 892205 LxWxH 590x627x175

895205 FOOT ASSEMBLY High foot assembly for GN5 code number 892205 LxWxH 590x627x1025

899000 TRACE MODULE The trace module allows data to be collected during the reheat and holding stages of the process. The data can be downloaded to a USB device The internal card storage can hold 260 hours of data

898000 PROBE The Probe Option permits automatic reheating to the correct temperature. The oven then changes to a correct holding temperature with or without humidification

826004 EUTECTIC BLOCK Retains chill down to -12ยบC

895010 SUPPORT PLATE When using GN pans less than full size

57

HEADING

MOBILE BAIN-MARIE Designed and manufactured by Bourgeat, in France. Stainless Steel construction throughout, insulated with 30mm of mineral wool.

Ergonomically designed control panel with shock protection and a regulated thermostat from 0ยบC to 100ยบC All units are water heated with one drainage valve per tank.

Wheels are made of a non oxidizing composite material, 2 with brakes.

Coiled connection lead is 2m long.

Max load varies between each unit from 60-150kg.

FEATURES Safety thermostat for each individual tank and cupboard Great manoeuvrability Easy to clean

SINGLE TANK BAIN-MARIE GN 2/1 Net Weight - 40kg Max Load - 60kg Voltage - 230V Power - 1300W

Tank for 1 x 2/1 or 2 x 1/1 H200mm

58

CODE

LxW

H

872002

900 x 690

900

HEADING BAIN MARIE SINGLE TANK BAIN-MARIE 3 GN 1/1 Net Weight - 55kg, Max Load - 90kg Voltage - 240V, Power - 2100W Tank for 1 x 2/1 + 1 x 1/1 or 3 x 1/1 H200mm

CODE

LxW

872003 1280 x 690

H

900

2 TANK BAIN-MARIE 3 GN 1/1 Net Weight - 45kg, Max Load - 60Kg Voltage - 240V, Power - 1400 Individual tank for 2 x 1/1 H200

CODE

LxW

H

872012

900 x 690

900

3 TANK BAIN-MARIE 3 GN 1/1 Net Weight - 60kg, Max Load - 90kg Voltage - 230V, Power - 2100W Individual tank for 3 x 1/1 H200

CODE

LxW

872013 1280 x 690

H

900

59

HEADING TROLLEYS All Stainless Steel Shelves equipped with sound proof plates All trolleys are fitted with ø125mm composite wheels, 2 with brakes Max 50kg load per shelf CODE

60

LxWxH

Space Between

TROLLEY 2 SHELVES Flat Pack

778056 880x580x960

590

TROLLEY 3 SHELVES Flat Pack

778456 880x580x960

280

TROLLEY 2 SHELVES Fully Welded

778106 940x600x960

590

TROLLEY 3 SHELVES Fully Welded

778506 940x600x960

280

HEADING TROLLEYS EN 631.2 CODE

LxW

H

GAP

15 Shelves

775915

460x630

1700

89

20 Shelves

775920

460x630

1700

67

15 Shelves

774915

660x750

1700

89

20 Shelves

774920

660x750

1700

67

15 Shelves

773915

540x700

1700

89

20 Shelves

773920

540x700

1700

67

TRAY TROLLEY 12 LEVEL 781006 510X620

1700

108

GN 1/1 TROLLEY

GN 2/1 TROLLEY

60 X 40 TROLLEY

Tray Sizes 460x360 and 480x 370 1/1 GN530x325 and fast food trays 350x270

TROLLEY COVERS AVAILABLE SEE PAGE 143 61

HEADING ‘Z’ TROLLEYS EN 631.2 CODE

LxWxH

Space Between

777820 460x630x1790

75

777920 660x750x1790

75

20 Shelves

20 Shelves

The Z Trolleys are fully welded, the design allows for efficient storage when not in use

62

HEADING BOURGEAT HANDLING CODE

LxW

H

SELF LEVELLING TROLLEY For handling food prepared in tilting skillets. Allows the safe pouring and transfer of foods

793606

700 x 970

1140

SELF LEVELLING TROLLEY For Trays 777906

805 X 545

974

Can support 100-120 Standard trays 460x360, 480x370 or 1/1 GN

63

HEADING

HOT CUPBOARDS

All Stainless Steel inside and outside Twin walled self supporting structure insulated with 20mm of mineral wool Easy to use control panel with On/Off switch Adjustable thermostat from 0ºC to 100ºC

HOT CUPBOARD 60 PLATES CODE

LxW

H

Max Load

799006

395x410

850

50kg

Capacity 60 Plates 330ø Net Weight 27kg Voltage 230 V Power 800 W

HOT CUPBOARD 120 PLATES 799012

64

790x410

850

100kg

Capacity 120 Plates 330ø Net Weight 50kg Voltage 230 V Power 1600 W

PLATE DISPENSERS

CODE

PLATE DISPENSER DBL

LxW

H

777304 990x500

900

PLATE DISPENSER SNGL 777104 647x500

900

Capacity 130 Plates 200-310ø Net Weigh 55kg Voltage 240 V

Capacity 65 Plates 200-310ø Net Weight 35kg Voltage 240 V Power 1400 W

SINGLE TUBES

777430 428x428

745

777436

140

Designed to sit into Benchtops

Capacity 65 Plates 200-310ø Voltage 240 V

COVER FOR ALL UNITS

ø 368

65

HEADING BOURGEAT CODE

LxW

H

585X120

735

731109

360X140

260

INSECT KILLER

731110

530x140

260

INSECT KILLER

731111

660x140

260

KNIFE DECONTAMINATION UV emission through germicide 855606 tube for an efficient photochemical action

INSECT KILLERS

Stainless Steel Body with removable insect tray The units can be Wall mounted, Hung, or Free Standing

INSECT KILLER Coverage 40 M3 2 x 8W 240V

Coverage 80 M3 2 x 15W 240V

Coverage 240 M3 2 x 40W 240V

66

BOURGEAT SINKS HEADING Stainless Steel Design Delivered with trap, easy to clean, WELS approved parts In most states it is neccessary to use a safety water tempering valve This may be supplied by your installer however we do offer a unit made in Australia and guaranteed by the manufacturer NEFA.

WASH HAND BASIN 5 LITRE Leg Operated CODE

LxW

H

850400

340x365

530

BASIN

ø 275

NEFA TEMPERING VALVE 850402

15mm Male

TTV15C

MOBILE HAND BASINS CODE

L

MANUAL WITH FOOT PUMP 848000

H

1243

ELECTRIC PUMP FOOT CONTROL 848010

1243

67

EXOGLASS HEADING Matfer whisks consist of an Exoglass handle with stainless steel wires The Advantages of a Matfer Exoglass whisk: The wires are welded in place Guaranteed not to pull out Withstands temperatures up to 220ยบC Impervious to liquids Dishwasher proof

Stainless Steel wires, guaranteed not pull out

Comfortable insulated handle

Watertight Exoglass Handle Heat resistant up to 220ยบC Ergonomic handle

68

WHISKS+GIANT HEADINGTOOLS CODE

L

111022 111023 111024 111025 111026 111027

250 300 350 400 450 500

SAUCE WHISK

HARDWIRE WHISK

111035 111036

BALLOON WHISK

111046

W

400 450

450

GIANT UTENSILS WALL RACK HOLDER S/STEEL 112030

GIANT SPATULA S/STEEL 112015

375

78

1000

GIANT SPATULA S/S + EXOGLASS 112011 112012

GIANT WHISK S/STEEL 111060 111061

800 1200

1000 1200

69

HEADING STRAINERS CHEESE/BOUILLON CLOTH

017400

870x700

BOULLION STRAINER EXOGLASS 017360

Ø200

017362

Ø255

SEIVE EXOGLASS

017364 017365

Ø200 Ø200

.7MM 1MM

SKIM’ALL

112282

410

Ø120

115020

ø175 ø205 ø255

Nº20 Nº20 Nº20

SIEVE set 3

70

HEADING LADLES AND LIFTERS The Boullion strainer from Matfer is a triple layer s/s sieve in an exoglass frame. It has a one piece insulated handle. Probably the finest sieve available. Dishwasher safe

The SKIM’ALL by Matfer allows you to drain even the smallest poached or fried products. The sieve is S/S unsoldered 3x3 mm mesh. The exoglass handle is comfortable to use.

Dishwaher safe.

71

HEADING UTENSILS LADLES

SKIMMER

CODE

Ø

Ltr

112021 112022 112023 112024 112025 112026 112028

60 80 100 120 140 160 200

50ml 125ml 250ml 500ml 750ml 1Ltr 2Ltr

112061 112062 112063 112064 112065 112066

80 100 120 140 160 180

SERVING SPOONS 112040 112041

BIRDS NEST FRYER 112320 112321

L370 L370

100 120

EGG POACHER 112334

72

Tinplate

Straight Side

HEADING UTENSILS CODE

FISH LIFTER S/S

112409

70

340

PIE CRIMPERS 112501

100

FISH BONE TWEEZERS 112503

93

SPATULA S/STEEL 112650 112652 112654 112656

200 250 300 350

310 390 450 510

CRANKED SPATULA S/STEEL 112670 112672 112674 112676

155 205 260 310

315 370 420 470

CRANKED SPATULA EXOGLASS 112688 112687 112686

200 250 300

330 380 430

73

HEADING SCRAPERS CODE

SCRAPER PLASTIC

112837

SCRAPER NYLON

112840

L

W

148

99

120

95

SCRAPER EXOGLASS & RUBBER 112845

120

70

SCRAPER PLASTIC SET OF 5 112850

110

SCRAPER 1/2 MOON PLASTIC 112851

74

198

90

149

HEADING SCRAPERS CODE

LxW

112641 112643

180 220

SCRAPER S/STEEL PLASTIC HANDLE

112820

120x85

SCRAPER S/STEEL

112822

130x120

SCRAPER STRAIGHT EXOGLASS

112825

115x80

SCRAPER ROUND EXOGLASS

112826

115x80

421743

190x115

CLEANING SPATULA PLASTIC HANDLE

CHOCOLATE SCRAPER

75

HEADING EXOGLASS® UTENSILS Exoglass is a composite material developed by Matfer It is non porous Dishwasher safe Can be sterilised Withstands temperatures up to 220ºC Also assists in all HACCP recommendations

Exoglass tools to assist in the production of Allergen free food PELTON SPATULA EXOGLASS

EXOGLASS SPOON

CODE

L

Colour

112424

300

PURPLE

113334

300

PURPLE

112434

240

PURPLE

EXOGLASS TONGS

76

EXOGLASS® UTENSILS 220ºC CODE L PELTON SPATULA EXOGLASS

PLAIN

Colour

112420

300

Grey

112421

300

Blue

112422

300

Red

112430

290

DUOLON TONGS 112425

320

SERVING SPOONS EXOGLASS

PERFORATED

112444 112445

340 340

Black Red

112454 112455

340 340

Black Red

240 240 240

White Black Red

EXOGLASS TONGS 112437 112438 112439

77

HEADING EXOGLASS® UTENSILS 220ºC CODE

L

Colour

113330 113338 113345

300 380 450

Beige Beige Beige

113331 113332 113334

300 300 300

Blue Red Purple

SPOON EXOGLASS

SPATULA THERMOMETER 113092 385

Flexible

SPATULA THERMOMETER 113090

385

SPATULA PLAIN 113025 113030 113035 113040 113045 113050

250 300 350 400 450 500

BEVELLED SPATULA 113501

350

ELVEA RUBBER SPATULA 110ºC 113525 113535 113545

78

250 350 450

Solid

HEADING EXOGLASS® UTENSILS CODE

L

ºC

ELVEO RUBBER SPATULA 260ºC 113724 113735 113745

250 350 450

260 260 260

ELVEO RUBBER SPATULA for JARS 113720

250

260

250 330

220 220

200 250 300

220 220 220

SPATULON RUBBER SPOON The Rubber is 100ºC

113825 113833

EXOGLASS BENT SPATULA 112688 112687 112686

“EL BL VEO AD ” H E H AS EA A V TR ER E Y 260 SIST FLE A ºC NT XIBL UP E TO

90º ANGLE

79

WOODEN HEADING UTENSILS CODE

L

BEECHWOOD SPATULA 114112 114113 114114 114115 114116 114117 114118

250 300 350 400 450 500 600

BEECHWOOD SPATULA GIANT 114120 114121 114122 114123

800 1000 1200 1500

BEECHWOOD SPOON 114131 114132

300 350

CREPE SPATULA BOXWOOD 114145

260

CREPE SPREADER BOXWOOD 114147

80

250

HEADING W

L

25 30 35 40 45 50 60 70

Bristles 60 60 60 60 60 60 60 60

180

ø15

20 25 30 35 40 45 50

Bristles 50 50 50 50 50 50 50

CODE PASTRY BRUSH COMPOSITE Natural Bristles with composite handles

116011 116012 116013 116014 116015 116016 116017 116018

PASTRY BRUSH ROUND 116020

PASTRY BRUSH WOOD Natural Bristles with quality wood handles

116031 116032 116033 116034 116035 116036 116037

FLOUR BRUSH BLACK 118305

210

FLOUR BRUSH WOOD 116050

330

BOTTLE FOR SPRAYING RUM 116430

1L

81

DISPENSERS Sauce or Fondant Dispenser These two units both Stainless Steel and Polycarbonate are light weight and easy to use. Both come complete with nozzles The Stainless Steel unit includes 3 outlet sizes 3,6,8mm Polycarbonate unit includes 4 different sized nozzles

STAINLESS STEEL Stand Sold Seperate CODE

Ø

S/S DISPENSER

258825

185

180 1.9

STAND

116515

140

420

SPARE NOZZLE SET 116523

3+6

H

Ltr

POLYCARBONATE S/S STAND INCLUDED 2 sizes 1.5 LTR

116540

208

308 1.5

.75 LTR

116601

140

270 .75

Supplied with 4 nozzles 2.5,4,5.5,and 8mm Supplied with 1 nozzle 4mm This small unit is very easy to use

82

PORTION DISPENSERS

Automatic Portion Funnel

Made of Polycarbonate, Stainless Steel and Exoglass, this 1.5L Portion Funnel is designed for all portion dosing of syrup, sauces, chocolate and creams.

The precise portion control on the handle will assist in the control over food costs and will bring consistency into production.

Dosage max is 20cc

AUTOMATIC FUNNEL

CODE

ø

H

116605

220

420

83

BREAD CODE

L

OVEN PEEL S/STEEL 118006

W/Ø

1300

COUCHE CLOTH

Couche cloth is 100% natural Linen Washing not recomended. Regular brushing and drying

118560 118570

20Mtr 20Mtr

60 70

BANNETONS BASKET 118503 118504 118508 118509

190 220 270 350

Ø Ø 120 130

EAR OF WHEAT MARKER 154101

90x110

BAKERS BLADE DISPOSABLE 120006

120

BREAD MARKERS

84

120036 120037 120038 120039 D

B

A

C

80 80 65 65

A B C D

DECORATIVE TOOLS A unique range of quality Decorating tools Made in France by Matfer using the finest quality S/Steel.

Handle is hygienically and permanently joined

VEGETABLE PEELER 120901 215mm

PICKLE KNIFE 120903 145mm

STRIPPER ZESTOR 120910 150mm GRAPEFRUIT KNIFE 120912 220mm

DECORATING KNIFE 120916 210mm

BUTTER CURLER/CHANELLING 120920 195mm

APPLE CORER 120925 210x20mmø SCORING KNIFE 120935 146mm

PINEAPPLE CORER 120930 220x26mm

85

HEADING FORGED KNIVES

by MATFER The new range of forged knives with Matfer’s exclusive design, meets the needs of the most demanding Chefs. The bolster with its exclusive design ensures a perfect balance.

The Stainless Steel blade tempered with molybdenum and Vanadium ensure a balance between resistance and easy sharpening.

A well designed handle for extensive use and the back angles of the bladed rounded for safety.

These knives are designed for the passionate professional

CHEFS KNIFE 120515 150mm 120520 200mm 120525 250mm

SLICING KNIFE 120536 200mm 120537 250mm

UTILITY KNIFE 120510 100mm

86

THE INDICATED LENGTH IS FOR THE BLADE

HEADING FORGED KNIVES

by MATFER BONING KNIFE 120533 130mm

FISH SLICING KNIFE 120535 200mm

BREAD KNIFE 120539 230mm

UTILITY SERRATED KNIFE 120543 130mm

HAM KNIFE 120529 320mm

87

MATFER CODE

L

FISH LIFTER 112409

340

ADJUSTABLE CAKE SLICE Single Wire

120090

440

Spare Wire

120092

438

POTATO PEELER Black ABS Ideal for peeling most vegetable left or right handed

090384

110x65

FLEXIBLE CUTTING BOARD 130700 530x325

20

SPARE FLEXIBLE BOARDS The system has a rigid base with locating pegs The tops are flexible and have two usable cutting surfaces The tops are replaceble when worn

88

130701 530x325 PK4

MATFER CODE

L

H/PK

FISH SCALER ALUMINIUM

CHEESE WIRES

121100

220

122031

800

PK10

BOARD SCRAPER POLYETHYLENE With replaceable blades. The scraper restores used polyethylene cutting boards to a smooth surface 139005

SPARE BLADES

202

139006

H70

PK2

MEASURE JUG 1 LITRE POLYCARBONATE 251012 Ø125

SPICE RACK “Roll’Box”

017084

510

H180

115

89

ROLLING PINS CODE

L

ø

BEECHWOOD ROLLING PIN 140005

500

45

POLYETHYLENE ROLLING PIN 140018

500

48

BALL BEARING ROLLING PINS

PLAIN

140022

400

65

FLUTED

140025

400

65

ADJUSTABLE ROLLING PIN

Helps roll exact thickness pastry. Lets you roll 11 different and consistant thicknesses

140030

90

520

Various

ROLLING PINS CODE

L

ø

BASKETWORK ROLLING PIN 140105

220

36

DECORATION ROLLING PIN 140114

240

47

220

35

350

35

CARAMEL ROLLING PIN 140201

NOUGAT ROLLING PIN 140203

RULER GRADUATED 140206

640

91

PASTRY CODE

L

141002

350

CROISSANT CUTTER S/STEEL

TRIANGLE CUTTER S/STEEL 141004

350

DOUGH CUTTER EXTENDABLE 141010 5 Wheel NICKEL 141012 7 Wheel 141013 5 Wheel 10-120MM LATTICE CUTTER S/STEEL 141105

125

LATTICE CUTTER PLASTIC 141110

92

110

Triangle 97x210

70x100

Plain Plain Fluted

PASTRY CODE

L/Ø

QTY

ROLLER DOCKER S/STEEL/NYLON 141115

125

ROLLER DOCKER PLASTIC 141120

110

EXOGLASS CUTTERS ROUND 150101 150102 150103 150104

Ø20-100 Ø35-95 Ø30-100 Ø35-95

9 x Fluted 7 x Fluted 8 x Plain 7 x Plain

The cutter sets vary in size by 10mm ie 150101 has sizes 20mm 30mm... up to 100mm

EXOGLASS CUTTERS OVAL 150201

L40-130

7 x Fluted

ASPIC CUTTERS EXOGLASS 150513

Max27mm Set 6

150514

Max27mm Set 6

Heart, Square, Points, Clover, Comma, Half-

Moon

Star, Drop, Rhombus, Shield, Crescent, Half

Circle

150512

Max15mm Set 12

Heart, Square, Point, Clover, Shield, Star, Oval, Rhombus, Drop, Lily, Comma, Crescent

93

CUTTERS CODE

DIM

TO SUIT

SQUARE CUTTERS S/STEEL

SET 8

150320 40-110

RECTANGLE CUTTER S/STEEL 150322 150323 153046

75x35 80x40 95x40

336126/336434 336222

153105 116x36

336105/336415 336106/336416

EXOGLASS CUTTER HEART 150215 47x44 336392

EXOGLASS CUTTER SPOON 150214 95X43

336214

EXOGLASS CUTTER STAR 150217

74

336217

Note...

Most Cutters suit a Flexipan/Silform Sheet For reference see last Column

94

CUTTERS CODE

DIM

TO SUIT

SQUARE CUTTER S/STEEL 153052

70x70

336135

CHARLOTTE CUTTER S/STEEL 153039 153040

58 80

336088 336090

HEART CUTTER S/STEEL 153047 153079

75x65 38x35

336082 336225

SAPHIRE CUTTER S/STEEL 153044 153065

67 37

336152 336154

EGG CUTTER S/STEEL 153180

82x43

336180

95

CUTTERS CODE

DIM

APPLE TURNOVER CUTTER S/STEEL 153006 170x125

DOUBLE SQUARE CUTTER S/STEEL 153008

85x85

153009 110x110

WINDMILL CUTTER S/STEEL 153010 110x110

96

PLAIN ROUND CUTTER S/STEEL 154060

ø180

154063

ø240

154067

ø320

DISPOSABLE PIPING BAGS CODE

DIM

PK

PIPING BAG “COMFORT” XL Superior Quality Smooth Inside for easy filling Velvet Touch outside for grip Sturdy 3 layer film Max Temp 100ºC

75 Microns

165007 550x300

100

PIPING BAG STANDARD 70 Microns

165018 530x260

100

PIPING BAG POLYETHYLENE (100) 70 Microns

165016 510x300

100

DECORATING SET ‘DUO’ A Revolutionary Invention for tube decoration Makes original two-colour decoration either as stripes or enrobing.

Pastry: macaroons, butter cream, custard, Chantilly cream, mousse, meringue, marshmallow, royal icing etc...

Cooking: mayonaisse, compound butter, duchess potatoes, fine stuffing

‘DUO’ THE MOVIE 98

Easy to assemble, disassemble and clean

The kit is delivered in a plastic storage box including • 1 Cone • 4 tubes with 3 striping tubes and one enrobing • 6 screw on decorating tubes • 1 Pastry tube brush cleaner • 1 Recipe Booklet

DECORATING TUBES SET

CODE

Set

168001

Set

99

DECORATING TUBES CODE

SIZES

VARIOUS PIPING TUBES SET 24 166003 U1-U12, A6,A8,B6,B8 C6,C8,D6,D8,E6,E8, BU8,FE2

VARIOUS PIPING TUBES SET 12 166004 U3,U5,U7,U9,U11,U13 C6,C7,D8,E7,F7,F8 PLAIN PIPING TUBES SET 6 166006 U4,U5,U6,U8,U10,U12 STAR PIPING TUBES 166007 C6,C8,D6,D8,E8,F8 VARIOUS PIPING TUBES SET 6 166008 P F 1 0 , P F 1 6 , N I D, B U 6 BU8,STH ST HONORE TUBE EACH 167142 YULE LOG TUBE 167151 6 Dents 17MM 167152 8 Dents 21MM SULTANE TUBE

166160

TUBE/NOZZLE CLEANER

100

710214 L170

DECORATING TUBES INTERCHANGEABLE

Made with Polycarbonate & designed by Matfer, these nozzles are designed with two couplers that can be adapted to any pastry bag allowing you to change tubes without emptying the bag CODE

SIZES

PLAIN PIPING TUBES POLYCARBONATE SET 10 166010 E8,D8,C6,U6,U12,BU8 PF10,NID

PLAIN PIPING TUBE S/STEEL SET 12

166500 Ø 4-15mm

SET 6

166501 U2,U4,U6,U8,U12,U14

STAR PIPING TUBES S/STEEL SET 12

166700 A 6 , A 8 , B 6 , B 8 , C 6 , C 8 D6,D8,E6,E8,F6,F7,F8

SET 6

166701 A8,B8,C8,D8,E8,F8

RIBBON NOZZLES 167175 SET 2. 1.5MM AND 5.5MM

101

FILLING TUBES/WARMERS SIZES

CODE

VERRINE TUBE NOZZLE 167180

Ø10 X 105

FILLING TUBES 167532

SET OF 3 Ø4,6,8MM Special tubes for filling choux pastries, eclairs etc suits all pastry bags

PASTRY BAG HOLDER 169001

230MM

‘KRAMPOUZ’ TOPPING WARMER 242350 Sauce Warmer 170 Watt 0-90ºC 220 x 160 x 200mm Ideal for maintaining sweet or savoury preperations at a constant temperature Thermostat adjustable 0-90ºC Bottle 1 litre graduated with 3 spouts

116340 Bottle 1 Ltr with 3 spouts 116341 Bottle 1 Ltr for Chocolate Spread

102

MATFER BAMIX GASTRO 200

This appliance is designed for light professional use. It has a powerful 200watt motor and a longer shaft L185mm to allow for quantities up to 20 Ltrs 240V & comes with 3 blades: Mincer - for all solids Beater - for all light & frothy dishes Whisk - for all thick and creamy dishes CODE

L

210358

395

BAMIX GASTRO 200

W

DECONTAMINATION CUPBOARD 10 Knife cupboard with magnetic strip and a 20 Knife cupboard with S/Steel basket for knives and small utensils. The UV rays emitted by the germicide tube ensure efficient photochemical decontamination.

Long life 15 Watt electronic ballast tube (8000hrs) cuts electricity consumption by 25%. Stainless Steel housing with tinted transparent door with safety switch.

It also has a magnetic fastener with lock and is wall mountable.

S/Steel screw set is supplied with cupboard 230V Power 18 watts

DECONTAMINATION CUPBOARD 10 855606 585x735

120

DECONTAMINATION CUPBOARD 20 855616 585x735

120

103

HEADING ALPHAMIX ‘2’ 5Ltr

The S/S bowl has a large capacity of 4.5 or 7.6 Ltrs. With its rounded base it is possible to work with small quantities and kneeding is more efficient

Control panel is touch sensitive with a 9 speed selector

The tools are perfectly designed for maximum efficiency Front square drive for all 10x10mm accessories including mincers, pasta, vegetable slicing/ grating etc

The protective screen adds safety while still allowing ingredients to be added without stopping the machine

104

The tilting head mechanism makes it easy to fit and release the tools and to install the bowl naturally with no positioning lugs

HEADING ALPHAMIX ‘2’ 5 Ltr CODE ALPHAMIX 5 LITRE

210655

The 5 Ltr Alphamix can •KNEAD UP TO 1.2Kg Dough •WHISK UP TO 8 egg whites (240g) and obtain 4.6 litres •WITH THE PADDLE up to 2.1 Kg of sweet dough or 1Kg of softened butter

MINCER ATTACHMENT

210070

Suitable for Alphamix and Kitchen Aid mixers Aluminium frame and tray Steel grinder plates and knives Plastic pestle Comes with 3 grinder plates :3, 4.5 and 8mm

VEGETABLE DISC SLICER/GRATER Suitable for Alphamix only Composite body and Pusher Stainless Steel Discs Comes with 2mm slicer 5 mm slicer and a 3 mm grater

210710

105

HEADING ALPHAMIX ‘2’ 8 Ltr

Alphamix 8 litre is equipped with an asynchronous motor for intensive use, increased reliability and longevity The protection screen ensures safety in use and its large side openings make it easy to add ingredients without stopping the machine

The stainless steel bowl has a capacity of 7.6Ltr. With its rounded base it is possible to work with very small quantities and kneading is more effective.

The whisk, hook and paddle tools are perfectly designed for increased effectiveness and reduced working time

Alphamix 2 motor has these advantages: Motor is assembled on ball bearings reducing vibration Motor is in direct contact with the tools so a better use of power The motor is brushless so no maintainance

Designed for intensive use in Pastry making, catering, restaurants, and institutional ALPHAMIX 8Litre can : KNEAD UP to 4KG of dough WHIP UP to 20 egg whites MIX UP to 1.5KG of softened butter

400MM

106

465MM

318MM

HEADING‘2’ 8 Ltr ALPHAMIX CODE ALPHAMIX 8 LITRE

210660

The 8 litre Alphamix can KNEAD UP TO 4Kg dough WHISK UP TO 20 egg whites (500g) WITH THE PADDLE up to 2.1 Kg of sweet dough or 1.5Kg of softened butter

SPARES FOR 8LTR MIXERS

WHISK

210672

PADDLE

210673

HOOK

210674

BOWL

210671

107

HEADING COOKING APPLIANCES ‘KRAMPOUZ’ WAFFLE MAKER How To Use Video

241555 Waffle Maker 1800 Watts 50º to 300ºC 440 x 260 x 220mm 20 KG ‘KRAMPOUZ’ CHURROS MAKER Removeable Plates Easy Cleaning

245550 Churros Maker 1800 Watts 50º to 300ºC 440 x 260 x 220mm 20 KG

Contact Grill dismantle

‘KRAMPOUZ’ CONTACT GRILL You can easily change the cooking plates ridged or smooth to use as a grill or toasted sandwich maker Stainless steel body Cast Iron enamel coated plates Self balancing upper plate 245540 Contact Grill 2600 Watts 50º to 300ºC 416 x 379 x 220 mm 28 KG RIDGED PLATES

245541 Contact Grill 2600 Watts 50º to 300ºC 416 x 379 x 220 mm 28 KG SMOOTH PLATES 245642 Smooth plate TOP 245643 Smooth plate BOTTOM

108

HEADING COOKING APPLIANCES ‘KRAMPOUZ’ CREPE MAKERS

242304 Standard Crepe Maker 3000 watt 400 x 125mm 16KG Machined Cast Iron plate for semi intensive use.

120794 Comfort Crepe maker 3600 Watt 400 x 174mm 22KG Machined Cast Iron plate for Intensive use.

Sealed design between plate and body for easy cleaning.

159117 Greasing pad with handle 70mmØ

159118 Greasing pad replacement pack of 10

120790 Abrasive stone for cleaning the crepe

plates

For crepe spreading tools see page 119

109

MANDOLIN 1000 + S/S HEADING

Thanks to its outstanding cutting edge and its slanted blade, the Mandoline 1000 guarantees perfect slicing. Compact & lightweight; it fits into a chef’s knife case. Using its indentation in the frame it will sit securely over a bowl or pan horizontally. Adjusting the cutting thickness up to 6mm is accurate and easy by using a single wheel behind the units body. Manufactured in Exoglass this unit is dishwasher safe. All blades are removable & replaceable.

CODE L

MANDOLINE 1000 W/BLADES & PUSHER 215040 Spare Parts Slicing Blade Waffle Blade Julienne Blade 3mm Pusher

MANDOLINE S/S W/BLADES

WITH 3,5 and 10mm julienne blades SOLD WITHOUT PUSHER

110

215043 215044 215045 215046 215001

PUSHER

215005

Julienne Julienne Julienne Reversible Blade

215010 215112 215115 215116

Spare Parts

370

370

3mm 5mm 10mm

MANDOLIN 2000 S HEADING

This Professional Mandoline 2000 ‘S’ comes complete with safety pusher and is made of a heat resistant, non porous fibreglass. The blades are crafted from high carbon Stainless Steel.

• The slicing blade has both a straight edge and a serrated edge.

• The safety guard or pusher protects your hands from the blades.

• The julienne blades create vegetable/fruit sticks of various widths.

• The guiding plate adjusts to vary the thickness of the slices required.

Easy to use and quick to dismantle. All the mandolines are dishwasher safe and provide a variety of creative slices.

CODE

MANDOLINE 2000 ‘S’ W/BLADES & PUSHER Spare Parts

Safety Pusher Julienne Julienne Julienne Reversible Blade

L

215060

396

215065 215070 215072 215074 215116

3mm 5mm 10mm

111

HEADING PREP CHEF One base support and multiple options.

The base is sold seperately. You can choose one blade set or more to suit your needs.

The pusher is supplied with each blade.

Changing the function requires no tools The complete unit is dishwasher safe

112

HEADING PREP CHEF CODE

DIM

BASE SUPPORT

215610 400X400

CHIP Square

215626

CHIP Square

215627 10x10mm

CHIP Rectangle

215628

8x16mm

TOMATO SLICE

215711

5mm

TOMATO SLICE 1/2 215613

5mm

This blade slices then cuts the slice in half

H

510

8X8mm

WEDGE 6

215616

6

WEDGE 8

215618

8

APPLE CORE

215619

113

HEADING APPLE PEELER

Made and designed by Matfer, the API apple corer is made of a composite plastic and stainless steel. Its dishwasher safe and a container can be placed under the tool to collect the core and peel.

The Matfer apple peeler is designed for professional use. By simply turning the handle, it is capable of simultaneously peeling, coring and slicing each apple.

The settings can be changed according to the variety of apple.

114

APPLE PEELER, CORER, SLICER

215250

340x100

TRUFFLE SLICER

215052

144x84

HEADINGTOOLS PREPARATION CODE DIM LE ROUET VEGETABLE SLICER W/3 BLADES 215131 SPARES

BLADE 2mm “ 3mm “ 6mm

FOOD PLANES S/STEEL

H 250

215132 215133 215134

216011 216012 216015

2mm grater 4mm grater 22mm grater

“RIC” APPLE PEELER CORER SLICER S/STEEL 215155

170

EGG TOP CUTTER S/STEEL 215307

NUTMEG GRATER S/STEEL 215432

115

TOMATO SLICER

This Professional Tomato Slicer designed by Matfer is dishwasher safe and simple to use, just open the holder with handle, place the tomato inside and pull the handle down quickly, the tomato will be perfectly cut into the container or serving tray underneath, which eliminates further handling of the fruit.

Matfer’s exclusive double action design, along with unique serrated blades, cuts the tomato with a slicing action as it passes through ensuring a perfect cut every time. Its unique design totally protects hands from blades minimizing the chance of injury. Made of heat resistant composite material and 18/10 stainless steel.

Dimensions L340 x W100 x H200 CODE

L

MATFER TOMATO SLICER EXOGLASS

215710 340x100

REPLACEMENT BLADE CASSETTE

215720

116

FOOD MILLS MOULI’S BY TELLIER CODE

Ø

215503

310

FOOD MILL TINPLATE Nº3 215513 Grills- 1.5, 2.5 & 4mm

310

FOOD MILL S/STEEL Nº3 Grills- 1.5, 2.5 & 4mm

Spare Grills Grill : 1.5mm Grill : 2mm Grill : 4mm FOOD MILL S/STEEL Nº5 Grill Included: 3mm Spare Grills Grill : 1.5mm Grill : 2mm Grill : 3mm FOOD MILL TINPLATE Nº5 Grill Included: 3mm

Spare Grills Grill : 1mm Grill : 1.5mm Grill : 2mm Grill : 3mm Grill : 4mm

213015 213025 213040 215505

370

072855 072857 072859 215515

370

215521 215522 215523 215524 215525

117

SALAD SPINNERS SWING SPINNER

CODE

DIM

CAP

215580 215582

460 373

20Ltr 10Ltr

A PREMIUM SPINNER FROM MATFER WITH CLEAR POLYCARBONATE LID, LOW PROFILE FOR STABILITY

SPARE PARTS DRIVE GEAR SET

118

215589

CREPE & CARAMALIZERS CODE

Ø

114145

260

114147

250

L

CREPE SPATULA

CREPE SPREADER

ELECTRIC CREPE MACHINE 50-300ºC / 15 AMP See also page 109

242304 ø400

ELECTRICAL CARAMELIZER 800 WATTS

240203 ø115

350

SUGAR BLOW TORCH 262268 The safety gas cylinders are now available from your local suppliers

GAS CYLINDER

262267

119

HEADING THERMOMETERSS

120

CODE

L

SALOMETER Graduated 1000-1250

250105

220

SYRUP DENSITY METER Graduated 1100-1400

250108

160

TEST TUBE FOR DENSITY S/STEEL

250112

175

250301 FREEZER THERMOMETER Plastic -40ºC +50ºC 250305 BAKER THERMOMETER Polypropylene -50ºC to +50ºC

200

WATER THERMOMETER Polypropylene -0ºC to 60ºC FRIDGE THERMOMETER Polypropylene-50ºC to +50ºC

250315

300

250302

300

PATE THERMOMETER Polypropylene 0ºC to 120ºC

250325

300

SUGAR THERMOMETER Polypropylene 80ºC to 200ºC

250330

300

SUGAR THERMOMETER S/Steel 80ºC to 200ºC

250331

300

INSERT THERMOMETER Replacement for Sugar Thermometers

250332

300

170

THERMOMETERS HEADING CODE

L

MATFER DIGITAL THERMOMETER 250522 106x58 -50ºC to +150ºC 0.2ºC accuracy S/S needle 3mm ,1mtr cable AAA battery CALIBRATION POSSIBLE DIGITAL THERMOMETER WITH NEEDLE -50 up to 300ºC 0.1ºC accuracy to 200ºC 1ºC above 200ºC IP54 watertight protection STANDARD NEEDLE

250527 143x80

250536

120

250537

170

VACUUM NEEDLE

250538

600

VACUUM SEAL

250544 4MTRS

OVEN NEEDLE Heat Resistant 250ºC

Food safe adhesive foam, air cannot enter, hole is sealed after bag is pierced

HOLDER FOR THERMOMETER 250500 S/Steel

121

HEADING THERMOMETERS

SPATULA THERMOMETER

CODE

ºC/Length

113090 385mm REPLACEMENT THERMOMETER 113091 -20ºC to +200ºC Both Spatula thermometers are designed to mix products like cream, sauces, sugar, and chocolate in a pan or dipping machine, while checking the temperature. The composite material Exoglass® spatula resists up to 200ºC Removable thermometer is watertight but do not put in the dishwasher.

SPATULA THERMOMETER

CODE 113092 385mm -20ºC to +200ºC

122

HEADING THERMOMETERS CODE

LxW

THERMOMETER WITH ALARM 072266

125x25

Stainless Steel needle. IP 65 water tight Perfect for internal cooking. 0ºC to 300ºC Includes a core temperature alarm

DIGITAL THERMOMETER HOLDER 250510

Stainless steel holder to be attached to the edge of the pan to keep the needle inside while keeping both hands free.

Suitable for needles up to 5mmØ

POCKET THERMOMETER INFRARED 250554

68x36

Check the surface temperatures of hot, dangerous or difficult to reach products like sugar, chocolate sauces etc.

Temperature range is -50ºC to +260ºC Battery operated , Resolution 0.1ºC

123

CHOCOLATE AIR HEATED R15 Combines simplicity, accuracy, and energy savings. Stainless Steel frame, and efficient insulation that contributes to better regulation. Complete with 2/3 S/S container with handles and lid with a 12 Kg chocolate capacity. Can be used with 2 x 1/3 S/S containers. Optional motor and wheel on Pg126 CODE

LxW

260510

H

240

Optional Probe Thermometer P126 Tempered glass touch sensitive control +/-

WATER HEATED SEMI AUTOMATIC

This Matfer tempering machine is a semi automatic bench top machine which tempers up to 22kgs of chocolate. Its accurate thermostat regulates from 25ยบC to 60ยบC. Complete with 1/1 GN container 150mm deep and lid Optional motor and wheel on Pg126

260522

210

Optional Probe Thermometer P.126

124

Tempered glass touch sensitive control +/-

CHOCOLATE CALORIBAC The Caloribac chocolate warmer is ideal for melting and maintaining correct temperatures for chocolate fondant, icing and sauces etc.

Temperatures range from 25ºC to 90ºC Holds 3.5Ltrs CODE

Ø

H

260432

254

188

WATER HEATED R10 This Matfer machine tempers up to 10kgs of chocolate and has a very accurate thermostat regulating temperatures from 20ºC to 60ºC. Body is made of Exoglass® making the unit light and durable. Internal bowl is S/steel, complete with Lid. LxW

260456

Tempered glass touch sensitive control +/-

265

125

CHOCOLATE HEADING The chocolate dispenser is suitable for 260510 and 260522 as shown on previous pages Wheels are sold Separately CODE

L/ø

DISPENSER MOTOR 260401 270x185

WHEEL LGE

260402

370ø

WHEEL SM

260403

300ø

S/S PROBE FOR DIPPING MACHINES

Kg 7.5Kg

suits 260522 suits 260510

260590 Can be fitted to Choc Tempering machines to show chocolate temperature instead of the set temperature. Includes holder

126

CHOCOLATE HEADING

CODE

L

W

CHOCOLATE SCRAPER 421743

119

115

White ABS, Semi rigid COOL DECOR PLATE 423060

13.2

Cool Plate for easy to shape chocolate decorations The stainless steel plate contains eutectic liquid that freezes at -21ยบC Tempered chocolate undergoes heat shock when in contact with the frozen plate. When the chocolate is detached it can be shaped

127

CHOCOLATE CODE

SET

DIM

261901

ea

600x400

PVC SHEETS FOR CHOCOLATE

CHOCOLATE DIPPING FORKS 262001 Set 10 SET 10

CHOCOLATE DIPPING FORKS 262012 262021 262022

ø10 2 Prong 3 Prong

CHOCOLATE MOULDS

POLYCARBONATE MOULDS -Smooth for a good shine -Easy to remove product -Easy maintenance -Very strong -Transparent for easy colour decoration

A = 275 x 135mm B = 275 x 175mm C = 275 x205mm D = 360 x195mm

128

Depending on the mould, plate dimensions vary Use the codes here to find the size

CHOCOLATE MOULDS

CHAMPAGNE CORK(B)

380101 40x28x15(32mlds)

DIAMONDS (B)

BARRELLS (A)

380102 30x25x18(40mlds) 380103 40X28X13(30mlds)

ROUNDS,OVALS,LOZENGES (B) 380104(36mlds)

HEARTS,SHELLS,FLOWERS (B)

380105(24mlds)

SQUARE FLOWERS(B)

TULIPS (B)

WALNUTS (B)

RECTANGULAR (A)

380106 25x22x15(36mlds) 380107 30x22x15(36mlds)

CANNELES (B)

380108 ø24x24(40mlds)

BURNT ALMOND (A)

380110 31x20x10(50mlds) 380111 32x21x19(21mlds) 380141 ø30x30 (24 mlds)

129

CHOCOLATE MOULDS

FISH,SHELLS,SNAILS (A)

FISH,PRAWNS,TURTLES (B)

380200(20mlds)

CHESS SET (B)

380222 1/2 (16mlds)

380201(35mlds)

FLEUR DE LYS (B)

BULLION COMMA (B)

380210 37x31x19(28mlds) 383408 32x15x13(24mlds)

COFFEE BEANS (B)

380211 17x12x5(104mlds)

COFFEE BEANS (B)

380212 22x25x8(78mlds)

SOCCER BALL (B)

380220 Ø25 (40mlds)

COCOA BEAN

CHOC BAR 100Gr (B) 380240 150x68x10

130

CHOC BAR 50Gr (B) 383807 118X50X9

COCOA FLOWER

CHOC BAR 30Gr (B) 383808 118X50X6

CHOCOLATE MOULDS

ROSES (B)

380152 29x19x14(32mlds)

QTR TANGERINE (B)

380149 43x20x14(15mlds)

FLOWERS ASS. (C)

380243 45Ø (20mlds)

ASSORTED MLDS (B)

CACAO BAR (B)

383905 76x35x5.5

LEAVES (B)

380228 60x30x5 (21mlds)

SMALL SCALLOPS (C)

SCALLOPS (B)

382001 32x15x13(24mlds) 380221 36x35x13(24mlds) 382009 120x139x(2mlds)

HEARTS (A)

380145 35X33X11(21mlds)

HEARTS (B)

380205 25x25x9(36mlds)

HEARTS (B)

380206 35X35X12(36mlds)

131

CHOCOLATE MOULDS HEADING

CHOCOLATE RAVIOLI (A) 380113 (12mlds) 36X28X8 6GR

STRIPED OVAL (B) 380161 (28 mlds) 30X19X17 16GR

RIB OVAL (B) 380158 (28mlds) 29X19X17 16GR

RIB TRIANGLE (B) 380159 (28mlds) 26X22X1616GR

ZIG ZAG RECTANGLE (B) 380160 (28mlds) 28X20X17 16GR

FACETED JEWELS 383209 (24mlds) 29X29X18 9GR

132

CHOCOLATE MOULDS HEADING

HEARTS IN RELIEF (A) 383607 (24mlds) 30X28X20 9GR

STRIPED STARS (A) 383102 (10 mlds) 55X55X5 4.4gr

STRIPED TRIANGLES (B) 380165 (28mlds) 36X35X12

STRIPED 1/2 SPHERE (B) 380163 (28mlds) 263X16 10GR

STRIPED CIRCLES (B) 380164 (28mlds) 32X13 10GR

CONES (B) 380168 (28mlds) 32X11X24

133

HEADING CHOCOLATE MOULDS

1/2 CRACKED EGG 382022 88 x65 (8mlds) RABBIT 382012 124x90 1/2 CRACKED EGG (2mlds) 382023 112x80 1/2 PLAIN EGG 382028 98 X 65(8mlds)

1/2 CRACKED EGGS 382003 36x24x15(27mlds)

EGG AND RABBIT(D) 382016 155 X 82 4 moulds 2 eggs

RABBIT/DUCK IN AN EGG (B) 382060 228X110 (2mlds) For 1

134

CARTOON RABBIT(D) 382014 230X80 (2mlds)For 1

HEADING CHOCOLATE MOULDS

HOLLY LEAVES (A) 380209

CHRISTMAS TREE(A) 381013 166X103X291/2 Tree

STANDING SANTA(B) 381025 205mm FOR 1 Santa

135

DECORATING GOLD FLAKES

CODE

L

410322

0.5gr

Gold Flakes for chocolate or cake decoration

CHOCOLATE GRATER 421005 110x80 S/STEEL

TEXTURED SHEETS 261915 SET 13 Semi-rigid PVC sheet for placing chocolates after dipping to create textured markings. Set has 13 sheets

DECORATING COMB WOOD PATTERN BLACK RUBBER 421700

DECORATING COMB 2 SIDED 421701 POLYPROPYLENE

DECORATING CODE DECORATING COMB

L

INDENTS

421705 421735

690 340

PD1/2 PD1/2

421706

690

PD3/4

421707

690

PD11/12

690

PD13/14

COMB FOR CHARLOTTE 2 SIDES 421709

RULER FOR BISCUIT FRAME PLASTIC 421716

560

W87

WRITING BAGS SMALL

Pre cut sizes of greaseproof paper. In dispenser bundles of 25 bags. Carton has 10 bundles

421802

Ctn10x25 Bundles

HEADING SUGAR This 1000W sugar lamp is designed and manufactured by Matfer and is recomended for professional use.

Comes complete with Silpat mat 400x300 which is replaceable see pg 143 Adjustable thermostat with 3 settings

CODE

262201

LxW

H

500

SUGAR HEATING LAMP 500W

262215

580max

SUGAR HEATING LAMP 2x500W 262210

INDENT

COPPER SUGAR PAN PAGE 42

138

HEADING SUGAR SUGAR PUMP

CODE

L

Ø

262230

360

6

SUGAR PUMP ECONOMY 262235

250

SUGAR BLOW TORCH Without Gas 262266

155

6

SUGAR BLOW TORCH Without Gas 262268 GAS TO SUIT

165

262267

SUGAR WORKING GLOVES 262289 262290 262291

SIZE 6-6.5 7-7.5 8-8.5

SUGAR BASKET MANDREL 262545

139

MATFER FILLING MACHINE Comes complete with 3 nozzles, Funnel, piston, Injector & lever made of Stainless Steel Will inject quantities from 1g to 12g Holding capacity of 3 Litres CODE

DIM

263001

L 3

‘GUITARE’ SLICING MACHINE

Great for cutting sponge, chocolate, jellies, caramel, and much more.

This unit is all Stainless Steel. Strings are easy to tighten from one side of the frame.

CODE BASE

DIM

263520 350x350

CUTTING FRAMES 263521 15mm 263522 22.5mm 263523 30mm 263524 37.5mm SPARE STRINGS 263528 PKT 4

140

H 120

BAKING SHEETS CODE BLUE STEEL BAKING SHEET 310103 310107 BLUE STEEL PERFORATED 310156 310157

LxW

MM

600x400 530X325

1.5 1.5

600X400 530X325

1.5 1.5

400x300 600x400 530x325

1.7 1.7 1.7

ALUMINIUM BAKING SHEETS 310604 600x400 310606 530x325

1.5 1.5

ALUMINIUM BAKING PERFORATED 310609 400x300 310610 530x325 310612 600x400

1.5 1.5 2

EXAL NON STICK’ 310201 Max cooking temp 310202 250ºC 310203

OVEN SHEET HIGH SIDE

Single Piece. Totally watertight 455001 Easy to clean 529401 rounded corners edge height 20mm

WIRE RACKS/GRILLS 312124 Stainless 312128 Steel Wire 312129

600X400 BL. Steel Aluminium

1.5 2

600x400 650x530 530x325

2/1 1/1

141

MATFER CODE DIM DENTS DE LOUP SHEET S/S 310710 300x300

TUILLES SHEET S/S

310711 350x300

8 Lines

6 Lines

MADELEINE SHEET N/STICK 310731 358x197

EXOPAP SILICON PAPER PK 500 320201 600x400

DISPENSER FOR EXOPAP PAPER (320201) 320250 600x400

FIBRE GLASS BAKING SHEET

142

320405 570X370

MATFER CODE

DIM

EXOPAT/SILPAT NON STICK MAT 321000 321001 321002 321003 321004

QTY

Tray Size 400x300 530x325 600x400 Actual Size 620x420 640x520

EA EA EA EA EA

SILPAIN NON STICK MAT 321012

Tray Size 600x400

DISPOSABLE TROLLEY COVERS 716766 716768

1/1GN 2/1GN

EA

200 200

WALL MOUNT FOR DISPOSABLE COVERS S / STEEL

716700

425X870

EA

Wall mount separate

PRACTICAL TIME SAVING To Suit

716766 / 716768

143

MOULDS

EXOPAN

EXOGLASS

FLEXIPAN

TINPLATE

EXAL

COPPER STAINLESS STEEL

This very complete range of moulds comes in all sizes and different materials. Smaller sized moulds come in blister packs this is specified beside the description. Non stick offers a great number of advantages. The non stick coating eliminates traces of oxidation on the products and for many greasing is not necessary. Baked products will not stick and cleaning is easier using a non abrasive sponge or cloth EXOPAN: These are steel moulds with a non stick interior coating. The non stick coating makes cakes and pastry removal easier and a simple wipe for cleaning.

144

EXAL: These are thick aluminium moulds generally 1mm thick with a non stick multi layer interior coating and lacquered exterior coating. Exal is rust proof and perfect for baking EXOGLASS: This new generation of composite moulds offer qualities that will satisfy all bakers.

• Rigid, does not buckle. • Composite material that never stains the dough • Dishwasher safe • Temperatures from -20ºC to +250ºC FLEXIPAN: Made of knitted fibreglass coated with highest grade silicon can be used from freezer to oven

EXOPAN NON STICK CODE BRIOCHE MOULD NS 330131 330132 330133 330134 330135 330136 330138

Ø

H

100 120 140 160 180 200 240

40 45 50 65 73 79 100

BOAT MOULD NS 330602 FLUTED 330604 330605 330606

85x35 100x42 110x45 120x50

BOAT MOULD NS 330611 PLAIN 330612 330613 330614 330615 330616

80x35 90x40 100x45 110x50 120x50 150x60

9 12 12 12 14 19

25 25 25 12 12 12

BRIOCHE MOULD NS 330621 330622 330623 330624 330625 330626

60 65 70 75 80 90

15 24 28 28 32 36

25 25 25 12 12 12

BRIOCHE MOULD NS SMALL FLUTE 330641 330643 330644

55 65 70

15 21 24

25 25 25

70 80 80 80

1 1 1 1

LxW

LxW

BREAD/CAKE PAN 331071 140x73 331073 180X80 331074 200X80 331076 300x80

10 11 12 13

PACK OF 1 1 1 1 1 1 1 PK

25 25 25 25

145

EXOPAN NON STICK CODE KOUGLOPF MOULD NS 331123 331125

Ø/L

H

200 240

100 120

DEEP ROUND MOULD NS 331151 100 FLUTED

30

DEEP CAKE MOULD NS 331201 PLAIN 331205 331206 Exoglass from page 158 331208 331209 331210 331211

146

100 180 200 240 260 280 300

30 40 40 42 45 45 47

PATE MOULD ROUND NS 331264 65 FLUTED 331265 80 331266 95

50 50 50

PATE MOULD MINI NS 331270 500x60 PLAIN

40

PATE MOULD NS 331273 RIDGES 331274 331275 331276

85 85 85 85

300x70 350x70 400x75 500x85

MATFER CODE PATE MOULD NS 331283 PLAIN 331284 331285 331286

LxW

H

300x70 350x75 400x75 500x85

80 85 80 90

PACK OF 1 1 1 1

OVAL PATE MOULD NS 331293 180x110 FLUTED 331294 210x140 331295 240x140

75 90 95

1 1 1

Ø PATE MOULD ROUND NS 331297 100 331298 120

90 90

1 1

DARIOLE MOULD NS 331591 331592 331594

FRIAND MOULD NS 331601 331602 331603

GENIOS MOULD NS 331611 331612 331613

Ø 45 50 60

45 50 55

PK

6 6 6

LxW 86x43 95x47 98x51

12 12 14

25 25 25

16 17 18

12 12 12

Ø 85 95 105

147

EXOPAN NON STICK CODE

Ø

H

331731 331732 331733 331734 331735 331736 331737 331738 331739

60 65 70 75 80 85 90 95 100

17 17 17 18 18 18 19 20 21

PACK OF 25 25 25 12 12 12 12 12 12

70x45 80x45

18 19

25 25

40 45 70

16 18 26

25 25 25

160 220 240 280 300

20 25 25 25 25

1 1 1 1 1

20 22 20 25 25 25 25

1 1 1 1 1 1 1

FLAN MOULD NS

OVAL MOULD NS

331761 331762

POMPONETTE MOULD NS 331803 331804 331809

TART MOULD NS FLUTED

332211 332214 332215 332217 332218

TART MOULD FLUTED NS FLUTED REMOVEABLE BASE

331811 331812 332222 332223 332225 332227 332228

148

REM BOTTOM

120 140 180 200 240 280 300

MATFER TART MOULD FLUTED NS REMOVEABLE BASE

CODE

Ø

H

331813 331815 331817 331682 331683 331684 331685

160 200 240 200 230 250 280

27 30 30 45 45 47 50

332234 332235 332236

240 260 280

25 25 25

332258 332260 332261

240 280 300

23 23 23

SIZE

PK

FRUIT TART MOULD NS FLUTED

ROUND TART MOULD NS

PETIT FOUR MOULDS NS 332001 PK 50 VARIOUS PETIT FOURS BOAT BRIOCHE SM BRIOCHE LG BOAT LOZENGE POMPONETTE OVAL RECTANGLE TARTLETTE F TARTLETTE DEEP SAVARIN SAVARIN TRIANGLE TARTLETTE PL SQUARE PLAIN

332510 332511 332512 332514 332518 332521 332524 332526 332528 332529 332530 332532 332533 332535 332517

L65 25 Ø35 25 Ø45 25 L62 25 L57 25 Ø35 25 L51 25 L49 25 Ø45 25 Ø35 25 Ø35 25 Ø45 25 L45 25 Ø45 25 35X35 25

149

EXOPAN NON STICK CODE

Ø

H

332615 332617

70 80

16 17

SAVARIN MOULD NS CLOSED

SQUARE TARTLETTE MOULD NS 332631 332632

Exoglass from page 158

332651 332652 332653 332654 332655 332656 332657 332658 332659 332160

25 25

10 10 10 12 12 13 15 18 20 20

25 25 25 25 25 12 12 12 12 EA

45 50 55 60 65 70 75 80 85 90 100

9 9 9 10 10 10 11 12 13 13 15

25 25 25 25 25 25 25 25 12 12 12

45 50 55 60 65 70 75 80

12 12 13 15 16 17 19 20

25 25 25 25 25 25 25 25

332671 332672 332673 332674 332675 332676 332677 332678 332379 332680 332681

DEEP TARTLETTE NS PLAIN

150

60 65 70 75 80 85 90 100 110 120

SHALLOW TARTLETTE NS PLAIN

332691 332692 332693 332694 332695 332696 332697 332698

12 12

10 12

57x57 68x68

TART MOULD ROUND NS FLUTED

PACK OF

MOULDS CODE

RAMEKIN MOULD NS 332602 332604

Ø

H

60 90

30 40

75 80 90

28 32 36

100 120

30 35

110

20

BRIOCHE MOULD EXAL

334024 334025 334026

DEEP ROUND MOULD EXAL

334110 334112

FLUTED TARTLETTE EXAL

334191

151

EXOGLASS PASTRY/ BREAD EXOGLASS Bread Pans are made of composite plastic, usable in fermentation control cabinets. Provides time and money savings as no greasing is required for bread/dough cooking. Can be used for pastry (cakes, brioches) with greasing.

Exoglass provides homogeneous cooking and even coloration of dough Stainless Steel sliding lid is an option Food grade materials Rigid will not buckle Dishwasher safe Usable from -20ยบC to +250ยบC Unbreakable in normal term of use CODE

LxW

H

Gr

BREAD PANS WITHOUT LID

345933 180x85 75 300 345934 250x90 75 500 345935 270x100 90 800 345936 290x110 100 1000

BREAD PAN WITH LID

345842 400x120

LIDS/COVERS

346933 346934 346935 346936

152

180 250 270 290

120 1800

EXOPAN BREAD CODE

LxW

H

331071 331073 331074 331075 331076 331077

140x73 180X80 200x80 250x80 300x80 400x80

70 80 80 80 80 80

CAKE/BREAD PAN STRAIGHT SIDE NON STICK

CAKE/BREAD PAN NON STICK

gr.

334015 200x90 1050 334016 250x100 1450 334017 300x110 2150

PULLMAN BREAD MOULD NON STICK

341641 400x100 341642 400x120 341643 400x140

H 100 120 140

153

MATFER CODE

LxW

H

BREAD PAN WITH COVER BLUE STEEL

340853 340855 340856

180x85 75 270x100 90 290x110 100

BAKING BEANS ALUMINIUM

340001

1KG

BAKING BEANS CERAMIC

340002

154

1KG

YULE LOGS CODE

LxW

H

340622

500x90

75

350x60 500x70 500x80

45 50 58

TRIANGULAR YULE LOG S/STEEL

YULE LOG MOULD S/STEEL

340635 340637 340638

YULE LOG MOULD NON STICK

340623 340624 340626

350X60 500X60 500X80

YULE LOG MOULD PLASTIC

351012

470x65

70

470x65

70

TRIANGULAR YULE LOG PLASTIC

351014

COMB FOR YULE LOG S/STEEL

341629

120 x 80

To suit 340638 or 340626

155

MOULDS CODE

Ø

H

340401 340402 340403 340406 340407

60 70 80 160 180

32 35 40 80 90

35 45 55

35 45 55

235 255 275 300 350

350 400 450 500 600

240 320

38 56

HALF SPHERE MOULD S/STEEL

CANNELE MOULD COPPER

Also available in Exoglass Pg 159

340415 340416 340417

CROQUEMBOUCHE S/STEEL

340463 340464 340465 340466 340467

TART TATIN DISH COPPER

341221 341223

PYRAMID MOULD S/STEEL

156

341101 341102 341103 341104

60 60X60 60 90x90 120x120 80 150x150 100

MOULDS CODE

Ø

H

CANOLLI CHEESE FORM PK6 ALUMINIUM

343141

25

CANOLLI CHEESE FORM PK6 EXOGLASS

345143

SPRING FORM STEEL WITH NON STICK COATING

340217

280

CHARLOTTE MOULD S/STEEL

341425

160

90

SEAFOOD PLATTER ALUMINIUM

532330 532335 532340

300 350 400

S/STEEL

713740

400

157

MOULDS

EXOGLASS MOULDS

A new generation of pastry moulds.

A composite material able to withstand variations in temperature from -20ºC to +250ºC Performance and output in terms of cooking make these EXOGLASS® moulds the perfect general-purpose product Extra resistant, they keep their shape Non-stick, in most cases without greasing. The composite material does not deteriorate over time Very easy to maintain, EXOGLASS® is dishwasher safe.

Ø

BRIOCHE MOULD PK 12 345233 345234 345235

Ø

H

PACK

70 75 80

28 28 32

12 12 12

25

100

6

70 80

15 18

12 12

70 80 90 100

10 12 13 15

25 25 12 12

CANOLLI CHEESE FORM PK6 345143

SAVARIN MOULD NS OPEN

345621 345622

SHALLOW TARTLETTE PLAIN

158

345676 345678 345680 345681

EXOGLASS MOULDS CODE

Ø

H

BREAD PANS WITHOUT LID EXOGLASS®

SEE PAGE 1523 FOR CODES & DETAILS

RAMEKIN MOULD PK 6 EXOGLASS®

345604

CONE MOULD PK 12 EXOGLASS®

345446 345448

CANNELE MOULD PK 6 EXOGLASS®

345415 345416 345417

DARIOLE MOULD PK 6 EXOGLASS®

345591 345592 345593 345594 345595

82

40

35 50

140 140

35 45 55

35 45 55

45 50 55 60 70

45 50 55 60 70

159

HEADING EXOGLASS MOULDS Ø

Ø

H

PACK

345060

90X40

40

6

30

6

100

30

6

80 90 100 110

12 8 20 20

25 12 12 12

95 200

60 103

6 1

BABY CAKE PAN EXOGLASS®

TART MOULD DEEP FLUTED

EXOGLASS®

345151

100

TART MOULD DEEP PLAIN EXOGLASS®

345201

TART MOULD FLUTED EXOGLASS®

345656 345657 345658 345659

KOUGLOPF MOULD

EXOGLASS®

160

345638 345642

HEADING EXOGLASS MOULDS CODE

Ø

H

90 100 110 120

20 20 20 20

QUICHE MOULD PK 12

USING EXOGLASS

EXOGLASS®

345109 345110 345111 345112

FLUTED OVAL TARTLETTE PK12 EXOGLASS®

345202

117x70

18

EXOGLASS TART RINGS SEE PG 192

FRAMES ARE AVAILABLE FOR THE CANNELES, BABY CAKE PAN AND THE KOUGLOPF. The moulds lock in place. Frames are indent only at this time.

161

DEMARLE WEBSITE

WHAT IS FLEXIPAN

Flexipan is a combination of fibreglass and high grade silicon which is approved for contact with food.

162

-40ยบC to +280ยบC

Advantages: Moulds no longer have to be greased for perfect unmoulding without any breakage, even for products which are thought to be impossibly delicate.

Small scale items can be manufactured economically.

Trays and moulds can be cleaned easily.

Several products can be used using the same mould, giving free reign to the users creativity.

Can be used 2000-3000 times before the first signs of sticking will appear.

The range is extensive and each year new shapes are added.

FLEXIPAN CODE

VOLUME

MLDS

336151 336001 336002 336056 336003 336057 336356 336302 336304 336306 336308

6ml 10ml 20ml 50ml 105ml 125ml 50ml 6ml 20ml 105ml 125ml

96 70 48 28 24 24 12 35 24 12 12

HALF SPHERES

ø

DIM

ø26 ø29 ø42 ø58 ø70 ø80 ø58 ø29 ø42 ø70 ø80

H16 H18 H21 H31 H40 H40 H31 H18 H21 H40 H40

SHEET

600x400 “ “ “ “ “ 400x300 “ “ “ “

UPSIDE DOWN HALF SPHERES 6ml

45

ø26 H16

600x400

336005 336006 336053

25ml 90ml 65ml

48 24 24

ø40 H20 ø63 H35 ø63 H25

600x400 “ “

336332

25ml

24

ø40 H20

400x300

336150

CYLINDERS

TARTLETTES 336007 336008 336083

13ml 20ml 65ml

60 48 24

ø42 H10 ø48 H15 ø77 H20

600x400 “ “

336402 336406

13ml 65ml

30 12

ø42 H10 ø77 H20

400x300 “

40

ø46 H15

600x400

BRIOCHETTES 336064

11ml

OVAL TARTLETTES 336112 336086

10ml 35ml

48 66x27 H11 600x400 30 106x45 H15 “

336442

10ml

24 66x27 H11 400x300

163

FLEXIPAN CODE

VOLUME

MLDS

336011 336074 336025 336078 336075 336076

20ml 18ml 75ml 80ml 55ml 100ml

50 64 30 24 30 20

51x31 57x35 70x50 96x45 70x50 85x60

336383

75ml

15

70x50 H30 400x300

336012 336013

15ml 90ml

54 24

35x35 H23 600x400 71x71 H41 “

336322 336323

90ml 15ml

12 24

71x71 H41 400x300 35x35 H23 “

OVALS

PYRAMIDS

DIM

SHEET

H20 600x400 H12 “ H30 “ H28 “ H25 “ H30 “

PYRAMID FLAT BOTTOM 336120

50ml

ROUND SAVARINS

50x50 H35 600x400

336014 336021 336015 336084

10ml 50ml 65ml 70ml

60 35 24 24

ø41 ø66 ø70 ø80

H12 H20 H23 H20

600x400 “ “ “

336355 336407

10ml 70ml

30 12

ø41 H12 ø80 H20

400x300 400x300

OVAL SAVARINS 336123 336125 336124

164

35

9ml 48ml 70ml

60 30 24

40x30 H12 600x400 70x50 H22 “ 80x60 H25 “

FLEXIPAN CODE

VOLUME

MLDS

SQUARE SAVARINS

ø

DIM

SHEET

336133 336134 336135

15ml 45ml 100ml

60 35 24

37x37 H17 600x400 56x56 H24 “ 70x70 H30 “

336422

100ml

12

70x70 H30 400x300

60 40

45x45 H12 600x400 60x60 H15 “

SQUARES 336148 336136

20ml 40ml

MINI BRIOCHETTES 336068 336070

15ml 80ml

48 24

336376

15ml

24

ROUND BRIOCHE

70x30 H10 600x400 130x48 “ H18 70x30 H10 400x300

336066

65ml

24

ø79 H15

600x400

336370

65ml

12

ø79 H15

400x300

24 24 24 24 12 12

ø68 ø62 ø78 ø81 ø62 ø81

600x400 “ “ “ 400x300 400x300

FLUTED BRIOCHE 336061 336060 336063 336016 336360 336363

60ml 60ml 105ml 105ml 60ml 105ml

H25 H26 H30 H37 H26 H37

MADELEINE 336042 336017

15ml 35ml

56 40

52x33 H15 600x400 78x47 H19 “

336390

35ml

20

78x47 H19 400x300

165

PETIT FOURS CODE

VOLUME MLDS

POMPONETTES

SHEET

336004

14ml

96

ø36 H17

600x400

336420

14ml

48

ø36 H17

400x300

54

ø40 H20

600x400

PETIT FOURS 336027

22ml

MEDALLIONS 336033

5ml

96

ø28 H8

600x400

336393

5ml

48

ø28 H8

400x300

14ml

54

ø38 H10

600x400

7ml

80

MINI CYLINDERS 336040

TRIANGLES 336108

166

DIM

48x41 H10 600x400

PETIT FOURS CODE

VOLUME

LOZENGES 336109

9ml

OCTAGONS 336110

28ml

HEXAGONS 336111

12ml

336423

MLDS

STARS

SHEET

70

60x35 H10 600x400

40

43x40 H26 600x400

60

45x40 H12 600x400

30

45x40 H12 400x300

ASSORTED DELICACIES 336364

DIM

30

Various

400x300

336217

35ml

24

80x65 H15 600x400

336330

35ml

12

80x65 H15 400x300

167

FLEXIPAN CODE

VOLUME

MLDS

336023 336019 336045 336046 336047

45ml 125ml 115ml 220ml 190ml

40 24 24 15 15

336338 336340 336342

45ml 125ml 115ml

MUFFINS

FLORENTINES 336018 336024

30ml 140ml

TART TATINS

SHEET

H29 H40 H36 H50 H35

600x400 “ “ “ “

20 12 12

ø51 H29 ø73 H40 ø79 H36

400x300 “ “

40 15

ø59 H13 600x400 ø102 H20 “

336054 336049 336020

135ml 245ml 305ml

15 12 12

ø82 H30 600x400 ø100 H35 “ ø105 H40 “

336350

305ml

6

ø105 H40 400x300

75ml 200ml 250ml 240ml 300ml

11 6 6 6 6

ø120 ø147 ø150 ø166 ø186

H15 600x400 H12 “ H15 “ H12 “ H12 “

H20 600x400 H25 “ H25 “ H24 “

ROUNDS 336026 336030 336031 336032 336022

PIES/QUICHES

168

DIM

ø ø51 ø73 ø79 ø82 ø91

336130 336132 336051 336052

35ml 135ml 128ml 390ml

40 15 6 6

ø58 ø96 ø140 ø150

336445

35ml

20

ø58 H20

400x300

FLEXIPAN CODE

VOLUME

MLDS

336081 336028

55ml 90ml

20 20

ø 66x62 H25 66x62 H35

HEARTS

CHESTNUTS

DIM

336080

65ml

24

64x64 H26

336394

65ml

12

64x64 H26

ROUND HEARTS 336082 336225

81ml 15ml

20 70

75x65 H35 41x38 H16

336225

15ml

35

41x38 H16

8

120 x113 H 35

DOUBLE HEART 336091

200ml

MINI CONES 336039

6ml

96

ø30 H20

336339

6ml

48

ø30 H20

336035

24ml

40

ø50 H40

336435

24ml

20

ø50 H40

80ml

20

ø70 H60

CONES

CONES 336037

SHEET

169

FLEXIPAN CODE

VOLUME

MLDS

DIM

SHEET

70ml

24

ø70 H27

600x400

336116

80ml

24

ø78 H20

600x400

336431

80ml

12

ø78 H20

400x300

DAISIES

336115

FLOWERS

FINANCIERS 336009 336010

10ml 45ml

84 24

50x26 H11 600x400 86x46 H14 “

336310 336312

10ml 45ml

42 12

50x26 H11 400x300 86x46 H14 “

8

339x40 H39 600x400

CHRISTMAS LOGS 336029

450ml

CHRISTMAS LOG INSERT 336127

170

700ml

5

495x40 H39 600x400

FLEXIPAN CODE

VOLUME

MLDS

RECTANGULAR CAKES

DIM

SHEET

336101 55ml 336103 110ml

24 25

80x30 H30 600x400 89x46 H25 “

336315

12

80x30 H30 400x300

16

110x60 H25 600x400

336113 139ml 336223 100ml 336175 6ml

18 24 90

102x58 H30 600x400 120x40 H25 600x400 45x15x12 600x400

336380 100ml

12

120x40 H25 400x300

336126 80ml 336137 115ml

24 24

95x40 H30 600x400 122x42 H32 “

336434

12

95x40 H30 400x300

55ml

FLUTED CAKE

336102 105ml

INGOTS

MINI LOGS

80ml

CHAMPAGNE BISCUITS 336128

20ml

45

109x24 H10 600x400

171

FLEXIPAN CODE

VOLUME

MLDS

336087 336088 336090

9ml 60ml 100ml

336397 336395 336396

CHARLOTTES

DIM

SHEET

60 24 18

ø ø35 H15 ø62 H35 ø78 H40

600x400 “ “

9ml 60ml 100ml

30 12 8

ø35 H15 ø62 H35 ø78 H40

400x300 “ “

336048 336038

50ml 60ml

24 15

ø78 H10 ø91 H8

600x400 “

336345

50ml

12

ø78 H10

400x300

BISCUITS

HALF EGGS/QUENELLES 336121 336122 336227 336181

5.6ml 30ml 5ml 20ml

72 42x26 H20 600x400 “ 42 60x40 H25 “ 100 42x22 H17 43 67x36x27 “

336347

30ml

18

60x40 H25 400x300

70ml

24

80x75 H20 600x400

128ml

15

SHELLS

336142

DARIOLES 336160

172

ø65 H55

600x400

FLEXIPAN CODE

VOLUME

MLDS

DIM

SHEET

336152 336154

75ml 17ml

24 54

70x70 40x40

600x400 “

336352 336354

75ml 17ml

12 24

70x70 40x40

400x300 “

100ml

18

ø78 H35

600x400

SAPHIRE

ROSACE 336041

INGOT W/CAVITY 336222 336176

90ml 70ml

24 24

120x40x20 600x400 100x40x25 600x400

336382

90ml

12

120x40x20 400x300

20ml

48

85x17x15 600x400

336221

18ml

56

52x32x20 600x400

336301

18ml

28

52x32x20 400x300

HALF CYLINDER 336224

MINI DROP

173

FLEXIPAN CODE

VOLUME

MLDS

DIM

SHEET

15ml

36

90x28x12

600x400

6

180X28

600x400

SPOON 336214

DOUBLE INSERT 336229

460ml

BAR CAKE GROOVED 336104

90ml

24

106x46x25 600x400

15

65x65x35

600x400

24

70x70x30

600x400

SQUARE CASKET 336228

110ml

SQUARE BAR 336230

174

90ml

HEADING FLEXIPAN CODE

BELL

VOLUME MLDS

DIM

SHEET

102X92

600X400

6

150x26

600x400

6

150x150

600x400

15 24

76ø 59ø

600x400 600x400

18 40

70ø 45ø

600x400 600x400

130ml

336161

15

260ml St HONORE CROWN 336242

300ml SQUARE INSERT 336234

INTERLACING DROPS 336036 336093

VOLCANO 336094 336059

175

FLEXIPAN CODE

VOLUME MLDS

DIM

SHEET

40x22 70x35

600x400 600x400

59x35 76x45

600x400 600x400

VOLCANO 336092 336094

20ml 80ml

54 18

INTERLACING DROPS 336093 336036

65ml 105ml

24 15

MINI ONDULOS 336095

18ml

50

50x35x20 600x400

75ml

24

70X70X35 600x400

90ml

20

SAVARIN SAPHIRE 336156

HEXAGON 336144

176

80X25

600x400

FLEXIPAN CODE

VOLUME MLDS

DIM

SHEET

CHRISTMAS TREE 336165

100ml

20

90X85X30 600x400

95ml

56

90X60X31 600x400

45ml

24

70X45X20 600x400

EGG 336190

STAR 336218

SQUARE INSERT 336234

300ml

6

150x150

600x400

16

110x60

600x400

FLUTED CAKE 336102

105ml

177

FLEXIPAN HEADING CODE

VOLUME

MLDS

DIM

SHEET

RECTANGLE WAVE 336256 336704

76ml 76ml

OVAL INDENTED 336257 336705

90ml 90ml

24 12

79x49x29 600x400 79x49x29 400x300

24 12

85x61x30 600x400 85x61x30 400x300

1/2 SPHERE SPIRAL 336258 336706

83ml 83ml

24 12

64x37 64x37

600x400 400x300

20 10

118x81 118x81

600x400 400x300

BRIOCHE FLUTED 336259 336707

92ml 92ml

LITTLE SHELL 336193 336708

178

27ml 27ml

50 25

55x39x22 600x400 55x39x22 400x300

SILFORM HEADING TARTLETTE RANGE

Producing tartlette bases (part or fully baked) has become much easier with the new range of SILFORM tartlettes. No need to prick or to line the dough, or even garnish with dry beans any more. Due to its silicon components, this mould is non-stick and therefore does not need greasing. The perforated texture of the Silform allows a perfect and uniform heat diffusion for an optimum quality of baking and a perfectly crusty pastry.

CODE

MLDS

DIM

SHEET

337040 337041

60 48

ø42 H10 ø48 H15

600x400 “

40

ø58 H20

“

60

ø35 H15

“

48

66x27 H11

“

30

106x45 H15

“

60

45x45 H12

“

40

60x60 H15

“

ø MINI ROUND TARTLETTES

MINCE PIES 337042

MINI CHARLOTTES 337043

MINI OVAL TARTLETTES 337045

OVAL TARTLETTES 337046

MINI SQUARES 337047

SQUARES 337048

179

HEADING SILFORM BREAD AND CHOUX RANGE

Specially designed for baking bread in a range of different shapes: round rolls, hot dog buns, milk rolls, hamburger buns, blind baking etc The full range is not represented here so if you have a special requirement please call us to discuss the possibilities.

CODE

ECLAIR

VOLUME MLDS

DIM

SHEET

40ml 15ml

18 48

125x25 70x30

600x400 600x400

100gr 120gr 250gr 220gr 500gr

12 8 7 6 5

169x64 259x64 260x85 314x60 310x75

600x400 600x400 800x400 600x400 400x300

130gr 160gr 175gr 175ml

15 12 11 11

102øx20 104øx20 125øx16 114øx18

600x400 600x400 600x400 600x400

6 25

243x103 89x46

600x400 600x400

337002 337006

OBLONG

337010 337025 337026 337030 337064

ROUND 337016 337021 337022 337063

RECTANGLE 337035 337062

180

440gr 110gr

HEADING SILFORM VIEW DEMONSTRATIONS ON VIDEO CODE

MLDS

DIM

SHEET

TART

337040 337041 337042

60 48 40

ø42 H10 ø48 H15 ø58 H20

600x400 “

CHARLOTTE

337043

60

ø35 H15

“

OVAL TART

337045

48 66x27 H11

OVAL TART

337046

30

SQUARE TART

337047

60 45x45 H12

“

SQUARE TART

337048

40 60x60x15

“

106x45 H15

“

“

181

HEADING The Flexipat mat will enable you to mould easily all types of sponges, creme brullees, jelly strips, fruit jellies or crispy nougatine

Chocolate sponge

Sponge unmoulding

Crispy nougatine

Jelly strip

Creme brulee

Thanks to the Flexipat edges, you can get perfect and regular layers that can be added one after one in your dessert set frame Sunshine Dessert Jaconde sponge, creme brulee and Sun fruit jelly made with the Flexipat Mat Recipe from the book “Choosing Flexipan�

CODE

L xW

H

FLEXIPAT MATS 421000 421002 421003 421004 321206

L xW

MATCHING FRAME 555x360 480x280 335x335 555x360 535x335

10 13 16 20 50

371013 371014 371013 -

FLEXIPAT a flexible baking sheet with edges to use in the freezer or oven. You can create layers of sponge, creme brulee or fruit jelly and much more.

Flexipat assists in increasing productivity, no wastage of edges and the presentation is also enhanced with the even nature of the layers created.

Advantages: Its flexible, its self supporting stability and above all the non stick properties allowing easy turning out of the product without any risk of breakage.

ADVICE FOR USING YOUR FLEXIPAN TRAYS • FILLING Place your Flexipan on the baking sheet or grid before filling it to facilitate transport. If some indents on the tray are empty fill with water.

• BAKING The Flexipan can be used in any oven but without direct contact with any heat source ie. a flame. The temperatures and the baking times should be adapted depending on the oven used. We recommend using each flexipan on a perforated sheet or grid to optimise the circulation of hot air. Ideally small pieces should be unmoulded once out of the oven. For delicate products such as sponge cakes, you are advised to let the product cool before unmoulding.

• CLEANING To clean, simply soak in hot soap water using a non abrasive sponge and a non aggresive detergeant. You are advised to wash Flexipan very regularly. Over time accumulation of grease is detrimental to the durabilty of the material.

• STORAGE Flexipan trays should preferably be stored flat and in piles of 6 maximum.

183

SILICON DECORATIVE SHEETS CODE LARGE GREEK FRIEZE ø 422001

DIM 600x400

SMALL GREEK FRIEZE 422002

600x400

422003

600x400

DOME

DOTS & DASHES

VENETIAN

422004

600x400

422005

600x400

422011

600x400

RISING SUN

184

SILICON DECORATIVE SHEETS CODE STRAIGHT FLUTE

DIM

422006

600x400

LABYRINTH 422009

600x400

BUBBLES

422010

600x400

YING YANG 422027

600x400

ROSETTE CAKE MAT 422100 ø180,200,220

SPIRAL CAKE MAT 422120 ø180,200,220

XMAS LOG MAT 422130

480x170

185

DEMARLE BOOKS CODE CHOOSING FLEXIPAN

811001

Demarle provides professional chefs with a comprehensive users manual for the non stick flexible Flexipan trays.

Three chefs, all of them experienced with teaching, present you a large range of creations, from deserts to petit fours and also savoury recipes.

Each recipe has been designed to fill a flexipan tray and is presented in a highly instructive style with the ref# to be used and its characteristics.

GREEDY SECRETS

811003

This is the newest book for Demarle from the same three chefs. The recipes are inovative and easy to follow. The design of the book is unique as it is able to ‘stand’ on your work bench while you create. The paper used is resistant to spills and can be wiped clean.

EXCEPTIONAL EXCURSIONS 811002 Exceptional Excursions with Flexipan is an exceptional book for sweet and savoury gastronomy enthusiasts. 90 chefs around the world let their imagination flow and created recipes that represented the tastes of their country.

Demarle photographer Frédéric Lebain travelled the world to the pastry shops and kitchens of the greatest chefs and managed to capture the essence of each chef and his/her passion.

186

MATFER STACKING FRAME

Exclusive system from Matfer Allowing the assembly of sheets of entrements and mousses in perfect layers of 2 or 3 flavours, permissible with the stacking frames.

Procedure:

1. Fill the first frame on the base with your mixture, smooth with a ruler and let chill 2. Stack the second frame on top and layer your second filling, smooth & chill 3. Stack the third frame and repeat with your next delicious layer.

4. Freeze whole if necessary, unframe CODE H DIM COMPLETE SET 370100 Set 600x400 4 PCE

ADDITIONAL FRAMES

COMPLETE SET 4 PCE

370107 370108 370109 370110

10 15 20 Base

“ “ “ “

370102

Set

400x300

370112

10 15 20 Base

“ “ “ “

ADDITIONAL FRAMES 370113

370114 370115

187

DECORATIVE PLASTIC STENCILS HEADING CODE

DIM

HEXAGONS

441001

600x400

HEARTS

441002

600x400

CIRCLES

441003

600x400

CLOVER & CIRCLES

188

441005

600x400

OVALS

441006

600x400

SQUARES

441007

600x400

CHECKERS

441008

600x400

MULTI MOULDS

Multimoulds designed for individual cakes. Height of all 40mm.

Made of plastic these moulds can be used for mousse, entrements, icecreams and much more. The pushers are sold serepately though recommended for perfect edges when the cake is removed from the mould.

CODE

DIM

SHEET SIZE

ROUND OVAL MINI ROUND

350001 350002 350041

ø65 85x50 ø40

400x300 400x300 400x300

ROUND OVAL HEART TEAR COMMA PYRAMID MINI ROUND MINI OVAL

350011 350012 350017 350018 350019 350020 350051 350052

ø65 85x50 75x70 90x58 90x58 70x70 ø40 50x30

600x400 600x400 600x400 600x400 600x400 600x400 600x400 600x400

350021 350022 350027 350028 350029 350061 350062

ø64 83x47 74x69 88x57 90x58 ø39 49x29

400x100 400x100 400x100 400x100 400x100 400x100 400x100

MOULDS

PUSHERS ROUND OVAL HEART TEAR COMMA MINI ROUND MINI OVAL

189

MOZAIC

The Mozaic triangle moulds and their cutting tools assist you in creating the presentations of the great classical pastry cooks.

CODE

L xW

H

371142

120x90

20

MOZAIC TRIANGLE MOULD PACK 8 TRIANGLE BASE CUTTER 371242

TRIANGLE CUTTER 371243

190

117x90

40

CAKE RINGS CAKE FRAME S/STEEL

Flexipat Size.60x40

CODE

Ø

H

371003 371005 371009 371015 371013

565x365 565x365 496x290 560x90 550x355

35 45 45 40 45

225x225 275x275 330x330 380x380

35 35 35 35

110 140 150 160 180 200 220 240 260 280 300

35 35 35 35 35 35 35 35 35 35 35

50

50

75 80 120 140 160 180 200 220 240 260 280

40 45 45 45 45 45 45 45 45 45 45

SQUARE CAKE FRAME S/STEEL

371106 371108 371110 371112

CAKE RING H35MM S/STEEL

371201 371202 371203 371204 371205 371206 371207 371208 371209 371210 371211

CAKE RING HIGH TINPLATE

371225

CAKE RING H45MM S/STEEL

371401 371402 371404 371405 371406 371407 371408 371409 371410 371411 371412

191

CAKE RINGS CODE

Ø

ADJUSTABLE CAKE FRAME

S/STEEL

371420 180/360

ADJUSTABLE CAKE FRAME S/STEEL

TART RING

MIN 371421 300x200

EXOGLASS PK6 S/STEEL EA

H 45

MAX 560x360

346701 346702 346705 346706 346707 346708

371701 371702 371705 371706 371707 371708

60 65 80 85 90 100

16 16 16 16 16 20

346709 346711 346712 346713 346714 346715 346716 346717

371609 371611 371612 371613 371614 371615 371616 371617 371618

120 160 180 200 220 240 260 280 300

20 20 20 20 20 20 20 20 20

120 140 160 180 200 220 240 260 280 300

60 60 60 60 60 60 60 60 60 60

INDIVIDUAL

ICE CAKE RING H60MM

S/STEEL

192

371801 371802 371803 371804 371805 371806 371807 371808 371809 371810

NONNETTES CODE

DIM

H

SQUARE

375001

56x56

30

CONVEX

375003

60x60

40

HEARTS

375005

70x55

30

HALF MOON

375007

87x43

25

1/4 CIRCLE

375008

55x55

40

CONVEX

375009

55x55

40

HEXAGON

375014

70x70

40

TEAR

375021

80x50

40

LOZENGE

375023

90x60

30

POINT

375025

70x50

40

LILY

375031

70x60

40

OVAL

375040

70x45

30

PENTAGON

375045

70x70

30

ROUND

375070 375072 375104

ø60 ø65 ø65

30 40 45

TRIANGLE

375078

65x65

45

193

MATFER CODE

L

CRUMB SCRAPER

661290

152

COPPER CLEANER

720311 720312

0.15 1

760331

H225

S/S

Polising paste for cleaning and reviving Copper Very easy to use little effort required

MATFER CHEFS HATS Non woven 100% biodegradable vegetable fibre maximum absorption with no skin irritation Fully adjustable

PK

PK10

INSULATED HAND WEAR RESISTANT UP TO 250ยบC MATFER MITTS

773002

L400

PAIR

773012

L400

PAIR

In compliance with European standard EN420 (innocuousness) EN388 (mechanical) and EN 407 (thermal risk) Made of leather Double fabric lining for temperature up to 250ยบC

MATFER GLOVES

194

BOOKS

195

BOOKS CODE

CHOOSING FLEXIPAN

811001

LANGUAGE

ENGLISH

EXCEPTIONAL EXCURSIONS 811002

ENGLISH

BREADS & VIENNOISERIES 811005

ENG/FR

813063

ENG/FR

PETIT GATEAUX

196

BOOKS CODE

DELECTABLE DELIGHTS 820212

PASTRY MAKING

YULE LOGS

LANGUAGE

ENG/FR

812012

ENG/FR

813066

ENG/FR

TARTES AND GATEAUX 813062

ENG/FR

197

BOOKS CODE

LANGUAGE

LES RECETTTES GLACEES 813025

ENG/FR

CHOCOLATE ET CONFISERIE P1 813039

ENG/FR

CHOOSING FLEXIPAN 811001

ENG/FR

EXCEPTIONAL EXCURSIONS

811002

198

ENG/FR

BOOKS CODE

LANGUAGE

GREEDY SECRETS 811003

ENG/FR

See Page 186 for more information on this new book

____________________________________________________ ____________________________________________________ _____________________________________________________________________________________ _____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________

199

NUMERICAL INDEX 010620 010720 010820 010920 011121 011201 011202 011204 011208 011209 011214 011215 011221 011222 011223 011228 011238 011260 011261 011263 011264 011265 011268 011269 011500 011511 011512 011731 011759 011811 011812 015308 015303 015601 015700 015701 015702 016700 016800 017084 017202 017360 017364 017365 017400 017510

200

19 19 19 19 7 12 12 13 14 14 13 13 13 8 8 13 13 12 14 16 16 16 12 14 13 10 20 13 7 26 27 12 12 14 16 16 16 17 17 89 33 70 70 70 70 18

017610 018100 018920 019402 019403 019404 019405 019406 019411 019413 019415 019417 019420 019436 019437 019927 020057 020058 020752 020783 020791 022888 022889 032108 032110 032112 032130 032140 034004 034005 034006 034007 034010 034011 034015 034016 034018 034019 034040 062001 062002 062003 062004 062005 062006 062007

18 10 20 9, 11 10 10 8 8 9 9 9 17 17 11 11 9 25 25 24 26, 27 24 18 18 42 42 42 42 42 41 41 41 41 41 41 41 41 41 41 42 38 38 38 38 38 38 38

062008 062020 062031 062032 062033 062034 062040 062051 072266 072855 072857 072859 073353 073357 090384 111022 111023 111024 111025 111026 111027 111035 111036 111046 111060 111061 112011 112012 112015 112021 112022 112023 112024 112025 112026 112028 112030 112040 112041 112061 112062 112063 112064 112065 112066 112282

38 38 38 38 38 38 38 38 123 117 117 117 29 29 88 69 69 69 69 69 69 69 69 69 69 69 69 69 69 72 72 72 72 72 72 72 69 72 72 72 72 72 72 72 72 70

112320 112321 112334 112409 112420 112421 112422 112424 112425 112430 112434 112437 112438 112439 112444 112445 112454 112455 112501 112503 112641 112643 112650 112652 112654 112656 112670 112672 112674 112676 112686 112687 112688 112820 112822 112825 112826 112837 112840 112845 112850 112851 113025 113030 113035 113040

72 72 72 73, 88 77 77 77 76 77 77 76 77 77 77 77 77 77 77 73 73 75 75 73 73 73 73 73 73 73 73 73, 79 73, 79 73, 79 75 75 75 75 74 74 74 74 74 76, 78 78 78 78

113045 113050 113090 113091 113092 113330 113331 113332 113334 113338 113345 113501 113525 113535 113545 113720 113724 113735 113745 113825 113833 114112 114113 114114 114115 114116 114117 114118 114120 114121 114122 114123 114131 114132 114145 114147 115020 116011 116012 116013 116014 116015 116016 116017 116018 116020

78 78 78, 122 122 78, 122 78 78 78 76 78 78 78 78 78 78 79 79 79 79 79 79 80 80 80 80 80 80 80 80 80 80 80 80 80 80, 119 80, 119 70 81 81 81 81 81 81 81 81 81

NUMERICAL INDEX 116031 116032 116033 116034 116035 116036 116037 116050 116430 116515 116523 116540 116601 116605 118006 118305 118503 118504 118508 118509 118560 118570 120006 120036 120037 120038 120039 120090 120092 120510 120515 120520 120525 120529 120533 120535 120536 120537 120539 120543 120794 120901 120903 120910 120912 120916

81 81 81 81 81 81 81 81 81 82 82 82 82 83 84 81 84 84 84 84 84 84 84 84 84 84 84 88 88 86 86 86 86 87 87 87 86 86 87 87 109 85 85 85 85 85

120920 120925 120930 120935 121100 122031 130700 130701 139005 139006 140005 140018 140022 140025 140030 140105 140114 140201 140203 140206 141002 141004 141010 141012 141013 141105 141110 141115 141120 150101 150102 150103 150104 150201 150214 150215 150217 150320 150322 150323 150512 150513 150514 153006 153008 153009

85 85 85 85 89 89 88 88 89 89 90 90 90 90 90 91 91 91 91 91 92 92 92 92 92 92 92 93 93 93 93 93 93 93 94 94 94 94 94 94 93 93 93 96 96 96

153010 153039 153040 153044 153046 153047 153052 153065 153079 153105 153180 154060 154063 154067 154101 165007 165016 165018 166003 166004 166006 166007 166008 166010 166160 166500 166501 166700 166701 167142 167151 167152 167175 167180 167532 168001 169001 210070 210358 210655 210660 210671 210672 210673 210674 210710

96 95 95 95 94 95 95 95 95 94 95 96 96 96 84 97 97 97 100 100 100 100 100 101 100 101 101 101 101 100 100 100 101 102 102 99 102 105 103 105 107 107 107 107 107 105

213015 117 213025 117 213040 117 215001 110 215005 110 215010 110 215040 110 215043 110 215044 110 215045 110 215046 110 215052 114 215060 111 215065 111 215070 111 215072 111 215074 111 215112 110 215115 110 215116 110, 111 215131 115 215132 115 215133 115 215134 115 215155 115 215250 114 215307 115 215432 115 215503 117 215505 117 215513 117 215515 117 215521 117 215522 117 215523 117 215524 117 215525 117 215580 118 215582 118 215589 118 215610 113 215616 113 215618 113 215619 113 215626 113

215627 113 215710 116 215711 113 215720 116 215732 113 215733 113 216011 115 216012 115 216015 115 240203 119 240302 3 240306 3 240322 3 241555 108 242304 109, 119 242350 102 245540 109 245541 109 245550 108 245642 109 250105 120 250108 120 250112 120 250301 120 250302 120 250305 120 250315 120 250325 120 250330 120 250331 120 250332 120 250500 121 250510 123 250522 121 250527 121 250536 121 250537 121 250538 121 250544 121 250554 123 251012 89 255310 47 255315 47 255320 47 257312 47

201

NUMERICAL INDEX 257315 47 257320 47 257335 47 257350 47 257360 47 257375 47 257380 47 258825 82 260401 126 260402 126 260403 126 260432 125 260456 125 260510 124 260522 124 261901 128 261915 136 262001 128 262012 128 262021 128 262022 128 262201 138 262210 138 262215 138 262230 139 262235 139 262266 139 262267 119, 139 262268 119, 139 262289 139 262290 139 262291 139 262545 139 263001 140 263520 140 263521 140 263522 140 263523 140 263524 140 263528 140 303036 42 304042 42 305016 42 305020 42 310103 141

202

310107 310156 310157 310201 310202 310203 310604 310606 310610 310612 310710 310711 310731 312124 312128 312129 320201 320250 320405 321000 321001 321002 321003 321004 321012 321206 330131 330132 330133 330134 330135 330136 330138 330602 330604 330605 330606 330611 330612 330613 330614 330615 330616 330621 330622 330623 330624

141 141 141 141 141 141 141 141 141 141 142 142 142 141 141 141 142 142 142 143 143 143 143 143 143 183 145 145 145 145 145 145 145 145 145 145 145 145 145 145 145 145 145 145 145 145 145

330625 145 330626 145 330641 145 330643 145 330644 145 331071 145, 153 331073 145, 153 331074 145, 153 331075 153 331076 145, 153 331123 146 331125 146 331151 146 331201 146 331205 146 331206 146 331208 146 331209 146 331210 146 331211 146 331264 146 331265 146 331266 146 331270 146 331273 146 331275 146 331276 146 331283 147 331285 147 331286 147 331293 147 331294 147 331295 147 331297 147 331298 147 331591 147 331592 147 331594 147 331601 147 331602 147 331603 147 331611 147 331612 147

331613 331682 331683 331684 331685 331731 331732 331733 331734 331735 331736 331737 331738 331739 331761 331762 331803 331804 331809 331811 331812 331813 331815 331817 332001 332160 332211 332214 332215 332217 332218 332222 332223 332225 332227 332234 332235 332236 332258 332260 332261 332379 332510 332511 332512 332514 332517

147 149 149 149 149 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 149 149 149 149 150 148 148 148 148 148 148 148 148 148 149 149 149 149 149 149 150 149 149 149 149 149

332518 332521 332524 332526 332528 332529 332530 332532 332533 332535 332602 332604 332615 332617 332631 332632 332651 332652 332653 332654 332655 332656 332657 332658 332659 332671 332672 332673 332674 332675 332676 332677 332678 332680 332681 332691 332692 332693 332694 332695 332696 332697 332698 334015 334016 334017 334024

149 149 149 149 149 149 149 149 149 149 151 151 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 153 153 153 151

NUMERICAL INDEX 334025 151 334026 151 334110 151 334112 151 334191 151 336001 163 336002 163 336003 163 336004 166 336005 163 336006 163 336007 163 336008 163 336009 170 336010 170 336011 164 336012 164 336013 164 336014 164 336015 164 336016 165 336017 165 336018 168 336019 168 336020 168 336021 164 336022 168 336023 168 336024 168 336025 164 336026 168 336027 166 336028 169 336029 170 336030 168 336031 168 336032 168 336033 166 336035 169 336036 175, 176 336037 169 336038 172 336039 169 336040 166 336041 173 336042 165

336045 168 336046 168 336047 168 336048 172 336049 168 336051 168 336052 168 336053 163 336054 168 336056 163 336057 163 336059 175 336060 165 336061 165 336063 165 336064 163 336066 165 336068 165 336070 165 336074 164 336075 164 336076 164 336078 164 336080 169 336081 169 336082 169 336083 163 336084 164 336086 163 336087 172 336088 172 336090 172 336091 169 336092 176 336093 175, 176 336094 175 336095 176 336101 171 336102 171, 177 336103 171 336104 174 336108 166 336109 167 336110 167 336111 167

336112 336113 336115 336116 336120 336121 336122 336123 336124 336125 336126 336127 336128 336130 336132 336133 336134 336135 336136 336137 336142 336144 336148 336150 336151 336152 336154 336156 336160 336161 336165 336175 336176 336181 336190 336193 336214 336217 336218 336221 336222 336223 336224 336225 336227 336228 336229

163 171 170 170 164 172 172 164 164 164 171 170 171 168 168 165 165 165 165 171 172 176 165 163 163 173 173 176 172 175 177 171 173 172 177 178 174 167 177 173 173 171 173 169 172 174 174

336230 174 336234 175, 177 336242 175 336256 178 336257 178 336258 178 336259 178 336301 173 336302 163 336304 163 336306 163 336308 163 336310 170 336312 170 336315 171 336322 164 336323 164 336330 167 336332 163 336338 168 336339 169 336340 168 336342 168 336345 172 336347 172 336350 168 336352 173 336354 173 336355 164 336356 163 336360 165 336363 165 336364 167 336370 165 336376 165 336380 171 336382 173 336383 164 336390 165 336393 166 336394 169 336395 172 336396 172 336397 172 336402 163 336406 163

336407 164 336422 165 336423 167 336431 170 336434 171 336435 169 336442 163 336445 168 336704 178 336705 178 336706 178 336707 178 336708 178 337002 180 337006 180 337010 180 337016 180 337021 180 337022 180 337025 180 337026 180 337030 180 337035 180 337040 179, 181 337041 179, 181 337042 179, 181 337043 179, 181 337045 179, 181 337046 179, 181 337047 179, 181 337048 179, 181 337062 180 337063 180 337064 180 340001 154 340002 154 340217 157 340401 156 340402 156

203

NUMERICAL INDEX 340403 340406 340407 340415 340416 340417 340463 340464 340465 340466 340467 340622 340635 340637 340638 340853 340855 340856 341101 341102 341103 341104 341221 341223 341425 341629 341641 341642 341643 343141 345060 345109 345110 345111 345112 345143 345151 345201 345202 345233 345234 345235 345415 345416 345417 345446 345448

204

156 156 156 156 156 156 156 156 156 156 156 155 155 155 155 154 154 154 156 156 156 156 156 156 157 155 153 153 153 157 160 161 161 161 161 158 160 160 161 158 158 158 159 159 159 159 159

345591 345592 345593 345594 345595 345604 345621 345622 345638 345642 345656 345657 345658 345659 345676 345678 345680 345681 345842 345933 345934 345935 345936 346701 346702 346705 346706 346707 346708 346709 346711 346712 346713 346714 346715 346716 346717 346933 346934 346935 346936 350001 350002 350011 350012 350017 350018

159 159 159 159 159 159 158 158 160 160 160 160 160 160 158 158 158 158 152 152 152 152 152 192 192 192 192 192 192 192 192 192 192 192 192 192 192 152 152 152 152 189 189 189 189 189 189

350019 350020 350021 350022 350027 350028 350029 350041 350051 350052 350061 350062 351009 351012 351014 351209 360012 360014 360016 360018 360020 360024 365020 365024 365028 367020 367024 367028 369024 369028 370036 370100 370102 370107 370108 370109 370110 370112 370113 370114 370115 371003 371005 371009 371013 371015 371106

189 189 189 189 189 189 189 189 189 189 189 189 41 155 155 41 39 39 39 39 39 39 40 40 40 40 40 40 39 39 40 187 187 187 187 187 187 187 187 187 187 191 191 191 191 191 191

371108 371110 371112 371201 371202 371203 371204 371205 371206 371207 371208 371209 371210 371211 371225 371401 371402 371404 371405 371406 371407 371408 371409 371410 371411 371412 371420 371421 371609 371611 371612 371613 371614 371615 371616 371617 371618 371701 371702 371705 371706 371707 371708 371801 371802 371803 371804

191 191 191 191 191 191 191 191 191 191 191 191 191 191 191 191 191 191 191 191 191 191 191 191 191 191 192 192 192 192 192 192 192 192 192 192 192 192 192 192 192 192 192 192 192 192 192

371805 371806 371807 371808 371809 371810 372016 372020 372024 372028 373016 373020 373024 373028 374024 374028 375001 375003 375005 375007 375008 375009 375014 375021 375023 375025 375031 375040 375045 375070 375072 375078 375104 380101 380102 380103 380104 380105 380106 380107 380108 380110 380111 380113 380141 380145 380149

192 192 192 192 192 192 39 39 39 39 39 39 39 39 40 40 193 193 193 193 193 193 193 193 193 193 193 193 193 193 193 193 193 129 129 129 129 129 129 129 129 129 129 132 129 131 131

NUMERICAL HEADING INDEX 380152 380158 380159 380160 380161 380163 380164 380165 380168 380200 380201 380205 380206 380209 380210 380211 380212 380220 380221 380222 380228 380243 381013 381025 382001 382003 382009 382012 382014 382016 382022 382023 382028 382060 383102 383209 383408 383607 383905 410322 421000 421002 421003 421004 421005 421700 421701

131 132 132 132 132 133 133 133 133 130 130 131 131 135 130 130 130 130 131 130 131 131 135 135 131 134 131 134 134 134 134 134 134 134 133 132 130 133 131 136 183 183 183 183 136 136 136

421705 421706 421707 421709 421716 421743 421802 422001 422002 422003 422004 422005 422006 422009 422010 422011 422027 422100 422120 422130 423060 441001 441002 441003 441005 441006 441007 441008 455001 532335 532340 529401 551024 661290 663002 663003 663012 663013 663032 663033 663042 663043 663052 663053 664536 664540 664550

137 137 137 137 137 75, 127 137 184 184 184 184 184 185 185 185 184 185 185 185 185 127 188 188 188 188 188 188 188 141 157 157 141 47 194 29 29 29 29 29 29 29 29 29 29 37 37 37

665116 665120 665122 665124 665126 665128 665132 665136 665140 665220 665224 665228 665232 665612 666125 666128 666228 667136 668220 668224 668228 668232 668524 668528 668532 675220 675224 675228 675232 676125 676128 678520 678524 678528 678532 686520 686524 686730 686735 690024 690028 690032 690036 690040 690045 691012 691014

37 37 37 37 37 37 37 37 37 34 34 34 34 36 36 36 34 37 37 37 37 37 35 35 35 34 34 34 34 34 34 35 35 35 35 31 31 31 31 32 32 32 32 32 32 31 31

691016 691018 691020 691024 691028 692014 692016 692018 692020 692024 692028 692032 692036 692040 692045 692050 693024 693028 693032 693036 693040 693045 694024 694028 694032 694036 694040 694045 694050 696020 696024 696028 697028 697032 697036 697040 697045 697050 698024 698028 703019 703020 703025 703030 703035 703040 710214

31 31 31 31 31 33 33 33 33 33 33 33 33 33 33 33 32 32 32 32 32 32 32 32 32 32 32 32 32 31 31 31 32 32 32 32 32 32 33 33 33 33 33 33 33 33 100

713740 716700 716766 716768 720311 720312 730109 730110 730111 740002 740004 740006 740010 740015 740020 740405 740406 740410 741002 741004 741005 741006 741010 741015 741020 741404 741405 741406 741410 741415 741420 742004 742006 742010 742015 742020 743002 743004 743005 743006 743010 743015 743020 743406 743410 743415 744005

157 143 143 143 40, 194 40, 194 66 66 66 45 45 45 45 45 45 46 46 46 45 45 45 45 45 45 45 45 45 45 45 45 45 45 14, 45 45 45 45 44 44 44 44 44 44 44 45 45 45 44

205

NUMERICAL HEADING INDEX 744006 744010 744015 744020 745004 745006 745010 745015 745020 746006 746010 746015 746020 747006 747010 747700 747701 747712 747713 747714 748000 748001 748002 748012 748013 748014 748016 748019 748700 748701 748712 748713 749800 750001 750012 760331 773002 773012 773915 773920 774915 775915 775920 777104 777304 777430 777436

206

44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 194 194 194 61 61 61 61 61 65 65 65 65

777820 777906 777920 778056 778106 778456 778506 781006 793606 799006 799012 800101 800102 800103 800104 800106 800107 800110 800114 800116 800201 800301 811001 811002 811003 811005 812012 813025 813039 813062 813063 820212 826003 826004 840230 840232 840240 840317 840320 840332 841217 841220 841230 842006 842020 842030 842040

62 63 62 60 60 60 60 61 63 64 64 4 5 4 5 5 5 5 6 6 6 6 196, 198 186, 196, 198 186, 199 196 197 198 198 197 196 197 20, 23 20, 23, 57 48 50 48 48 48, 50 50 48 50 48 51 51 51 51

842210 842404 843206 843212 843306 843310 843312 845608 848000 848010 850400 850402 855606 855616 870801 870804 870830 870840 870851 870870 870872 870990 872002 872003 872012 872013 880001 881600 881700 891210 891215 891220 892205 892210 892215 893210 893215 894110 894115 894120 895010 895105 895205 898000 899000

50 51 50 50 50 50 50 43 67 67 67 67 66, 103 103 23 23 20, 23 22 21 21 21 22 58 59 59 59 53 53 53 55 55 55 56 56 56 56 56 55 55 55 57 57 57 57 57

ALPHABETICAL INDEX BRIOCHE FLEXIPAN 165 BRIOCHETTES FLEXIPAN 163 BRUSH FLOUR 81 BUFFET DISPLAY 11 BUFFET PLATFORMS 8–11 BUTTER CURLER 85 C

A ADJUSTABLE CAKE FRAME 192 ALLERGEN TOOLS 76 APPLE CORER 85 APPLE PEELER 114 ASPIC CUTTERS 93 B BAIN-MARIE 58–59 BAKERS BLADE 84 BAKING BEANS 154 BAKING SHEET PTFE 142 BAKING SHEETS 141 BAMIX 103 BANNETONS BASKET 84 BAR CAKE FLEXIPAN 174 BELL FLEXIPAN 175 BIRDS NEST FRYER 72 BLINIS PAN NS 36 BLINIS PAN STEEL 38 BLOW TORCH 119 BOARD SCRAPER 89 BOAT MOULD NS 145 BONING KNIFE 87 BOOKS 196–199 BOULLION STRAINER 70 BREAD BASKET 84 BREAD KNIFE 87 BREAD MARKER 84 BREAD PANS 152–154, 159 BRIOCHE EXOGLASS 158 BRIOCHE EXOPAN 151

CAKE DISPLAY 25 CAKE FRAME 191 CAKE PAN 153 CAKE RING 191–193 CAKE SLICE 88 CANNELE EXOGLASS 159 CANNELE MOULD 156 CANOLLI EXOGLASS 158 CARVING STATION 21 CASSEROLE COPPER 40 CASSEROLE S/S 32 CHAFING DISH 12–17 CHAMPAGNE BISCUITS 171 CHARLOTTE MOULD 157 CHARLOTTES FLEXIPAN 172 CHEESE WIRES 89 CHEFS HATS 194 CHEFS KNIVES 86–87 CHIP CUTTER 113 CHOCOLATE FORKS 128 CHOCOLATE GRATER 136 CHOCOLATE MOULDS 129–135 CHOCOLATE SCRAPERS 75 CHOCOLATE TEMPERING 124–127 CHRISTMAS LOGS FLEXIPAN 170 CHURROS MAKER 108 COLD DISPLAYS 20, 23 CONE MOULD 159 CONES FLEXIPAN 169 CONTACT GRILL 109 COOKWARE 31–33 COPPER BOWL 42 COPPER CLEANER 194 COUCHE CLOTH 84

207

HEADING INDEX ALPHABETICAL CRANKED SPATULA 73 CREPE MACHINE 119 CREPE MAKERS 109 CREPE PAN NS 34–36 CREPE PAN STEEL 38 CREPE SPATULA 80 CREPE SPREADER 80 CROISSANT CUTTER 92 CROQUEMBOUCHE 156 CRUMB SCRAPER 194 CUTTERS PASTRY 93–96 CUTTING BOARD 88 CYLINDERS FLEXIPAN 163 D DARIOLE EXOGLASS 159 DARIOLE MOULD NS 147 DARIOLES FLEXIPAN 172 DECONTAMINATION CUPBOARD 103 DECORATING COMB 136 DECORATING KNIFE 85 DECORATING SET ‘DUO’ 98 DECORATING TUBES 100–102 DECORATIVE SHEETS 184–185 DENTS DE LOUP 142 DIGITAL THERMOMETER 121–122 DIPPING FORKS 128 DISPENSER SAUCE 82 DISPOSABLE COVERS 143 DOMINO 8–11 DOUGH CUTTER 92 E EGG POACHER 72 EGG WHITE BOWL 42 EXOGLASS MOULDS 158–161 F FILLING MACHINE 140 FILLING TUBES 102 FINANCIERS FLEXIPAN 170 FISH BONE TWEEZERS 73

208

FISH LIFTER S/S 73 FISH POACHER 33 FISH SCALER 89 FLAMBE ASSEMBLY 25 FLAMBE PAN 42 FLAN MOULD NS 148 FLEXIPAN 162–178 FLEXIPAT MATS 182–183 FLORENTINE FLEXIPAN 168 FLOUR BRUSH 81 FOOD MILL 117 FOOD MIXERS 104–107 FOOD PLANES 115 FOOD PREP MACHINE 112–113 FRIAND MOULD NS 147 FRYPAN COPPER 39, 40–41 FRYPAN OVAL 37 FRYPAN OVAL STEEL 38 FRYPANS INDUCTION 34–35 FRY PANS Non Stick 34–37 FRYPAN STEEL 38 G GASTRONORM PANS 44–47 GASTRONORM STORAGE 47 GENIOS MOULD NS 147 GIANT UTENSILS 69 GN LID 46 GN TROLLEYS 61–62 GOLD FLAKES 136 GRAPEFRUIT KNIFE 85 GRATERS 115 GUITARE 140 H HALF EGGS FLEXIPAN 172 HALF SPHERE MOULD 156 HALF SPHERES FLEXIPAN 163 HAM KNIFE 87 HEARTS FLEXIPAN 169 HEATED TROLLEYS 48–50 HEAT LAMP 17, 22

HEADING INDEX ALPHABETICAL HOT PLATE 22, 23 I INDUCTION ANTI SLIP 7 INDUCTION COOKTOP 3–8 INDUCTION FRYPANS 35 INDUCTION WARMERS 7 INDUCTION WOK 31 INFRARED THERMOMETER 123 INGOTS FLEXIPAN 171 INSECT KILLERS 66 INSULATED JUGS 19 J JAM PAN 42 JAR SPATULA 79 JUGS 28 JUICE DISPENSER 10 K KNIFE DECONTAMINATION 66 KNIFE DECORATING 85 KNIVES CHEF 86–87 L LADLES 72 LATTICE CUTTER 92 LE ROUET 115 LID COPPER 40 LID S/S 33 LIFTER 70 M MADELEINE FLEXIPAN 165 MADELEINE SHEET NS 142 MANDOLIN 110–111 MEASURE JUG 89 MILK DISPENSER 10 MOULDS EXOGLASS 158–160 MOULDS NON STICK 144–151 MOULI’S 117 MOZAIC MOULDS 190

MUFFIN FLEXIPAN 168 MULTI MOULDS 189 N NESTING TROLLEYS 62 NUTMEG GRATER 115 O OVAL MOULD NS 148 OVAL PATE MOULD NS 147 OVALS FLEXIPAN 164 OVEN GLOVES 194 OVEN MITTS 194 OVEN PEEL 84 OYSTER PLATE 157 P PAELLA PAN NS 37 PAELLA PAN STEEL 38 PASTRY BRUSH 81 PASTRY CUTTERS 94–97 PASTRY FRAME 187 PATE MOULD NS 147 PETIT FOURS NS 149 PICKLE KNIFE 85 PIE CRIMPERS 73 PINEAPPLE CORER 85 PIPING BAGS 97 PIPING TUBES 100–102 PLATE CUPBOARD 64 PLATES DISPENSERS 64–65 POMPONETTES FLEXIPAN 166 PORCELAIN INSERTS 13 PORTION FUNNEL 83 POTATO PEELER 88 PREP CHEF 112–113 PVC SHEETS CHOCOLATE 128 PYRAMID MOULD 156 PYRAMIDS FLEXIPAN 164 Q QUICHES FLEXIPAN 168

209

HEADINGINDEX ALPHABETICAL R RAMEKIN 151, 159 REFRIGERATED TROLLEY 51 REHEAT OVENS 52–55 ROLLER DOCKER 93 ROLLING PINS 90–91 ROOM SERVICE 26–27 RUBBER SPATULA 78–79 RUBBER SPOON 79 RULER 91 RUM SPRAYING 81 S SALAD SPINNERS 118 SALOMETER 120 SAUCE BOTTLE 102 SAUCE DISPENSER 82 SAUCEPAN COPPER 39–41 SAUCE PAN S/S 31 SAUCE WARMER 102 SAUTE PAN COPPER 39–41 SAUTE PAN S/S 31 SAUTEUSE COPPER 40 SAUTEUSE PAN NS 37 SAUTEUSE PAN S/S 32 SAVARIN EXOGLASS 158 SAVARIN FLEXIPAN 176 SAVARIN NS 150 SAVARINS FLEXIPAN 164 SAVARINS SQ FLEXIPAN 165 SCORING KNIFE 85 SCRAPER 74–75 SEAFOOD PLATTER 157 SEIVE EXOGLASS 70 SELF LEVELLING TROLLEY 63 SERVICE TROLLEYS 60 SERVING SPOONS EXOGLASS 77 SERVING SPOONS S/S 72 SHELF S/S 43 SHELLS FLEXIPAN 172 SIEVE S/S 70

210

SILFORM 179–181 SILICON PAPER 142 SILPAIN SHEET 143 SILPAT 143 SKIM’ALL 70 SKIMMER S/S 72 SLICING MACHINE 140 SOUP URN 17 SPATULA BEECHWOOD 80 SPATULA EXOGLASS 76, 77, 78 SPATULA S/STEEL 73 SPATULA THERMOMETER 78 SPICE RACK 89 SPILLPROOF LID 46 SPOON EXOGLASS 76, 78 SPOON FLEXIPAN 174 SPRING FORM 157 STACKING FRAME 187 STARS FLEXIPAN 167 STEAM PAN S/S 33 STENCILS 188 STOCK POT S/S 32 STRAINERS 70 STRIPPER ZESTOR 85 SUGAR BASKET 139 SUGAR BLOW TORCH 119 SUGAR GLOVES 139 SUGAR LAMPS 138 SUGAR PAN COPPER 42 SUGAR PUMP 139 SUGAR THERMOMETER 120 T TARTLETTE NS 150 TARTLETTES FLEXIPAN 163 TART RING 192 TART RING EXOGLASS 192 TART TATIN DISH 156 TART TATIN FLEXIPAN 168 TEXTURED SHEETS 136 THERMOMETERS 120–123 THERMOMETER SPATULA 78

HEADINGINDEX ALPHABETICAL TOMATO SLICE 113 TOMATO SLICER 116 TONGS 77 TRIANGLES FLEXIPAN 166 TROLLEY 24 TROLLEY COVERS 143 TROLLEYS S/S 60–63 TRUFFLE SLICER 114 TUILLES SHEET 142 V VACUUM NEEDLE 121 VACUUM SEAL 121 VEGETABLE PEELER 85 VERRINE TUBE 102 W WAFFLE MAKER 102, 108 WALL SHELF 43 WASH HAND BASIN 67 WHIPPING BOWL S/S 33 WHISKS 69 WIRE RACKS/GRILLS 141 WOK 31 WRITING BAGS 137 Y YULE LOG 155 Z ZABAGLIONE BOWL 42 ZESTOR 85

211

How to contact us.......

Worldwide Australia

Asia

China

Europe

Africa

Malaysia

Nth America

Latin America

Dubai

Vietnam

212

Eurochef Australia Tel: (612) 8338 9222 Fax: (612) 8338 9588 Email: eurochef@eurochefaus.com

11 Bumborah Point Road Port Botany NSW 2036 Australia www.eurochefaus.com

Eurochef Asia Tel: +852 2753 5626 Fax: +852 2753 5690 Email: sales@eurochef.biz

9/F, Johnson Industrial Building 340 Kwun Tong Road, Kwun Tong Kowloon Hong Kong

Eurochef China Tel: +861 6438 2431 Fax: +861 6438 2432 Email: eurochef@public3.bta.net.

3/F Lonsdale Centre 5 Wan Hong Road, Chaoyong District Beijing 100015 China

Eurochef Europe Tel: +334 7254 1310 Fax: +334 7254 1319 Email: eurochef@matik.fr

330, Route de Lozanne 69380 Civiex d’Azergues France

Eurochef Africa Tel: +331 6947 5991 Fax: +331 6947 5992 Email: eurochef.africa@wanadoo.fr

39 Rue Michel Ange 91026 Evry Cedex France

Eurochef Malaysia Tel: +603 2145 8863 Fax: +603 2145 4057 Email: eurochef@tm.net.my

Lot 148, 1/F Wisma MPL Jalan Raja Chulan 50200 Kuala Lumpur Malaysia

Eurochef North America Tel: +181 8782 0792 Fax: +181 8782 0799 Email: eurochef@matferinc.com

16300 Stagg Street Van Nuys California 91406 USA

Eurochef Latin America Tel: +331 4362 6040 Fax: +331 4362 5082 Email: eurochef@matfer.fr

9-11 Rue de Tapis Vert 93260 Les Lilas Paris France

Eurochef Gulf Tel: +971 4885 4575 Email: info@eurochef.ae

Dubai Investments Park 1 European Business Centre-Office 130 Dubai, United Arab Emerit

Eurochef Vietnam Cambodia Tel: +6 2814 120 Email: sales@eurochef.vn

Unit R4. 2nd Floor River Garden Building 170 Nguyen Van Huong St Ho Chi Minh City