Spills and Stains /

When it comes to cleaning stains on sheepskin, there are a number of cleaning treatments that can be used, depending on the type of stain. Before applying any cleaning treatment, the first and most crucial step is to "contain the stain" by firmly blotting up excess liquid spills and carefully scraping any solids.

Address accidental spills and stains immediately to avoid permanent damage.

Before using any stain treatment, “contain the stain” to prevent it from spreading further. Different types of stains require specific cleaning methods.

Please refer to the Stain Cleaning Guide table for more information >>

Soiling

The most common cause of soiling is dirty shoes on rugs. Placing a strategically positioned front door mat can prevent potential offenders from tracking dirt into the home, thus avoiding any soiling caused by dirt accumulation.

Staining bonds

Staining occurs when pigments chemically bond with wool fibres. Once this bonding takes place, it becomes very challenging to remove the stain without causing some damage to the wool pile. It is therefore crucial to promptly address spills and stains as soon as they occur.

Frequent and moderate cleaning is strongly advised. This preventive approach will help avoid the need for more extensive measures to restore sheepskin products to their original splendour.

Dealing with liquid stains

DO "contain the stain"

• Blot up liquids immediately using a paper towel or clean cloth. For large area spills, place down a clean towel and stand on it to absorb as much liquid as possible.

• Scoop up solids immediately using a knife or spoon, avoiding pushing the substance further into the wool pile.

Handle With Care

• Never rub wet wool pile as it can damage the fibres and cause further spread of the stain.

• Avoid drowning the wool in water or any other liquid, as it may cause watermarks on the surface and/or damage the rug's leather backing.

Wet Stain Remover:

For liquid stains, we recommend the use of a wet stain remover, ensuring the stain is first firmly blotted before applying any stain treatment.. Use a clean, dry towel or paper towels to firmly blot up the excess liquid prior to using a wet stain remover. If the stain covers a large area, place a towel down and stand on it to quickly blot up the excess. It’s important to take up as much liquid as possible in this first step to ensure you use less of the stain remover and achieve the best result. Avoid the temptation to pour water or other liquids directly onto the stain, as it can spread the stain and damage the woolskin backing.

Treating Red Wine Stains:

The extent of staining from red wine depends on the type of red wine, and it can vary significantly. Firmly blot up as much red wine as possible before applying a wet stain remover and continue to reapply and re-blot the area until no further colour transfers onto the towel or cloth. As the woolskin dries, the stain should lift further. In the case of red wine stains, a wet stain remover can be effective, even after the stain has dried off. For persistent discolouration after the stain has dried, attempt to repeat the application to remove more of the stain out of the woolskin.

Dry Stain Remover:

Designed for most food, drink, oil, and grease-based stains, this type of remover is suitable for woolskin rugs. This product is effective on nearly all dry stains that haven't caused a chemical reaction with the wool fibres. Never rub wet woolskin, as it damages the fibres - instead, use a dry stain remover lightly sprayed on the stain and then vacuum the resulting powder with a fine nozzle. We recommend that you check the manufacturer’s advise for your specific vacuum cleaner, as some modern vacuums might be sensitive to fine powder and lose their suction.