EPAIR& The E-Tech Vehicle Repair and Restoration Range RR ESTORATION Statistics claim 1 in 7 cars has sustained minor to medium bodywork damage
The damage caused to most vehicles is from the hazards of modern day motoring: parking in tight spaces, high kerbs, larger vehicles, and general wear and tear that comes from increased traffic volumes. The damage usually affects door mirrors, wheel arches, bumpers and the lower and middle side bodywork and can be categorised mainly as scuffs, scratches and small dents. The traditional approach to repairing this would be to go to a body shop or contact your local mobile franchise repair man. This approach will be expensive as labour costs make up the biggest cost of any repair or restoration work. If you consider making an insurance claim you know this will increase your renewal fee and affect your no claim status. So if your vehicle suffers any minor damage to body, bumper or paintwork and you repair it yourself you will save a considerable amount of money. The repairing procedure is quite straightforward however it is cloaked in “trade talk/jargon” that most people don’t understand and are intimidated by. Our Vehicle Repair & Restoration product range has been devloped to provide an effective and economic solution to repairing typical vehicle damage as mentioned above. If you are prepared to put in a bit of
ULTRA FINE SURFACE DETAILING FILLER
TECHNIK SURFACE DEEP CLEANER
TECHNIK REPAIRED SURFACE PRIMER
TECHNIK 2 in 1 FILLER & PRIMER
TECHNIK PLASTIC PRE-PRIMER
TECHNIK RUST PREVENTER
TECHNIK SELF-ETCH PRIMER
Part No: ER00102
Part No: ER00109
Part No: ER00108
Part No: ER00110
Part No: ER00111
Part No: ER00112
Fills minor scuffs and scratches and also primes the surface so it is ready for the top coat of paint.
Prepares all plastic surfaces for priming and painting. Ensures a strong foundation for primer and top coat of paint.
Stops rust on exposed and exterior metal & steel surfaces by creating an impenetrable barrier against moisture.
Specially developed to allow notoriously difficult surfaces to be painted such as: aluminium, stainless steel, bare metals etc
400ml
The first job Specially with any repair developed for is to clean the priming repaired, damaged area restored and thoroughly. filled surfaces. This product is Excellent made for this and coverage and does it perfectly. adhesion.
400ml
time and effort a saving of up to about 80% can be achieved which will both improve your vehicle’s appearance and increase its resale value. The fillers are easy to apply, sand and paint and are supplied in retail packaging for maximum impact and come with detailed instructions that are simple and straightforward to follow.
PLASTIC BUMPER & TRIM REPAIR PUTTY
250g Part No: ESF00107 (no hardener required)
250g Part No: ER00101 (242g putty/8g hardener)
Ideal for minor bodywork dents, shallow scuffs and scratches. The perfect finishing layer for an ultra smooth finish.
The perfect solution for cracked, split and holed plastic bumpers and trim. Excellent adhesion. Easy to sand and shape.
2
500ml
ADVANCED BODY FILLER
500g Part No: ER00103 (488g filler/12g hardener) 1000g Part No: ER00104 (975g filler/25g hardener) Specially developed for use on both modern day vehicle body panels as well as traditional steel ones. Ideal for filling & repairing dents, gouges, splits and scratches in body work.
400ml
500ml
Manufactured in Germany using the latest polymer, polyester and adhesion technology, this high quality range of professional body shop grade fillers and preparation paints and sprays has been specially developed for DIY use so that with a bit of time and effort you can achieve a perfect repair.
ULTRA LIGHT FILLER
420g Part No: ER00106 (408g filler/12g hardener) Half the weight and just as strong as conventional fillers. For use where weight reduction is required: motorsport, marine, cycling, modelling etc.
400ml
The amount of damage generally increases with the age of the vehicle.
FIBRE REINFORCED HOLE BRIDGING FILLER
362g Part No: ER00105 (350g filler/12g hardener) Gives structural strength to any repair. Ideal for filling and bridging holes, splits & cracks and for repairing rust damaged areas.
Sales 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com
Typical Vehicle Damage: 1 REPAIRING A SCRATCH OR SCUFF
Check the depth of the scratch - If it is under 3mm (3000 microns) deep see the below steps of how to repair and which products to use: If it is deeper than 3mm - SEE 3 Step 1 Clean the surface with Technik Surface Deep Cleaner Part No:ER00102 Step 2 Fill the scratch or scuff using either of the following products A or B: A Ultra Fine Surface Detailing Filler Part No: ER00107 - the ideal finishing layer for an ultra smooth finish and then use Technik Repaired Surface Primer Part No: ER00109 to prime the filled area ready for the top coat of paint. B 2 in 1 Filler & Primer Part No: ER00108 - use to fill and prime a scratch or scuff under 0.5mm (500 microns) deep. Apply several coats/layers. When filled apply the top coat of paint. Step 3 Top coat of paint - SEE PAGE 9
3 REPAIRING A DENT, DEEP SCRATCH OR CREASE IN BODY WORK
Step 1 Clean the surface with Technik Surface Deep Cleaner
Part No: ER00102
Step 2 Fill the damaged area using Advanced Body Filler Part No: ER00103 or Part No: ER00104. If weight reduction is important use the Ultra Light Filler Part No: ER00106 which is specially developed for use where weight reduction is required. Optional: As a final top layer and for an exceptionally smooth supercar finish use the Ultra Fine Surface Detailing Filler Part No: ER00107 Step 3 Spray over the filled area with Technik Repaired Surface Primer Part No: ER00109 before applying the top coat of paint. Step 4 Top coat of paint - SEE PAGE 9
REPAIR&
RESTORATION 2 REPAIRING A HOLE IN A BODY PANEL - Caused by accident or rust
Step 1 Clean the surface with Technik Surface Deep Cleaner Part No: ER00102 Step 2 Bridge and fill the hole with Fibre Reinforced Hole Bridging Filler Part No: ER00105 Step 3 Then for a smooth finish cover the Fibre Reinforced Filler using the Advanced Body Filler Part No: ER00103 or Part No: ER00104. If weight reduction is important use the Ultra Light Filler Part No: ER00106 which is specially developed for use where weight reduction is preferred. Optional: As a final top layer and for an exceptionally smooth supercar finish use the Ultra Fine Surface Detailing Filler Part No: ER00107 Step 4 Spray over the filled area with Technik Repaired Surface Primer Part No: ER00109 before applying the top coat of paint. Step 5 Top coat of paint - SEE PAGE 9
4 REPAIRING HOLED OR CRACKED PLASTIC BUMPER
Step 1 Clean the surface with Technik Surface Deep Cleaner Part No: ER00102 Step 2 Bridge the hole or crack from behind using Fibre Reinforced Hole Bridging Filler Part No: ER00105 Step 3 Fill the damaged area from the front using Plastic Bumper & Trim Repair Putty Part No: ER00101 Step 4 Use the Technik Plastic Pre-primer Part No: ER00110 over the filled surface prior to painting for maximum paint adhesion. Step 5 Spray over the plastic pre- primer with Technik Repaired Surface Primer Part No: ER00109 before applying the top coat of paint. Step 6 Top coat of paint - SEE PAGE 9
Sales 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com
3
REPAIR&
RESTORATION
Repair & Restoration Product Range Advanced Body Filler
• Suitable for filling and repairing dents, gouges, splits and scratches with a depth of up to 30mm. • Specially developed for use on both modern day vehicle body panels as well as traditional steel ones.
ADVANCED BODY FILLER CAN BE USED ON ALL TYPES OF VEHICLES:
Cult Vehicles
Retro Cars
Family Cars
TE
CH
VA NCE
D
AD
NOLOGY
Motorsport
Performance and Kit Cars
D ERE INE NY ENG ERMA IN G
Classic Cars
T US -R L A TI U AN ORM F
• Excellent adhesion to bodywork • Easy to sand and shape • When sanded leaves a smooth finish for priming and painting • New pre-accelerated formula - fast setting • Impact resistant with good flexibility • Polyester based filler • Waterproof and includes anti-rust properties • Suitable for professional paint shop oven - heat resistant up to 120°C • Can be used as a general purpose filler on steel or alloy bodywork, rigid plastics, glass fibre (GRP), wood and masonry
4 EASY STEPS: ADVANCED FILLER APPLIED DIRECTLY INTO DAMAGED/ DENTED AREA
1 DENTED BODY PANEL
2 DENT PREPARED
3 DENT FILLED
4 FILLER SANDED READY FOR PRIMING
DAMAGED AND DENTED BODYWORK Part number Description ER00103 Advanced Body Filler - 500g (488g Filler/12g Hardener, Instructions and Applicator) ER00104 Advanced Body Filler - 1000g (975g Filler/25g Hardener, Instructions and Applicator)
Ultra Light Filler • Specially developed for use where weight reduction is required: motorsport, marine, cycling, modelling etc. • Half the weight and just as strong as conventional fillers • Produced using a unique low density formula so it is about 50% lighter SUITABLE FOR: Motorsport • Modelling • Motorbikes • Marine • Kit Cars etc
All types of motorsport
Modelling and Design
50% LIGHTER
Supplied with detailed instructions, hardener and spreader
4
Motorbikes
Boating and Marine
Performance and Kit Cars
D ERE INE NY ENG ERMA IN G
Model Cars and Planes
• Very versatile, can be used like any other filler, but offers great weight saving gains • Excellent adhesion, fast drying and easy to sand and shape • Waterproof and includes anti-rust properties • Ideal for applications that are exposed to high friction or vibrations. • Will resist temperatures up to 180°C • When sanded leaves an ultra smooth finish ready for priming & painting • Polyester based filler • Ideal for use on metal or alloy bodywork, rigid plastic, glass fibre (GRP), wood and masonry Part number Description ER00106 Ultra Light Filler - 420g (408g Filler/12g Hardener)
Sales 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com
REPAIR&
RESTORATION
Repair & Restoration Product Range Ultra Fine Surface Detailing Filler
U
• The perfect finishing layer for an ultra smooth finish • Air dries - no hardener required I M AT E LT
R
FILLE
Supercar Surface Finish
RED
E • Ideal for minor bodywork dents, INE NY ENG ERMA shallow scuffs and scratches. IN G • Can be applied directly into the damaged area and will fill up to a depth of 3mm - 3000 microns(µ) • New Nano Polymer technology creates an ultra smooth finish leaving no air bubbles and ready for priming and painting. • Easy to sand and shape leaving no swirl marks or pin holes. • Excellent adhesion to bodywork and other fillers. • Can be used on metal or alloy panels, rigid plastics, GRP (Glass Fibre) and is the perfect finishing layer to any other body filler.
Part number Description ER00107 Ultra Fine Surface Detailing Filler - 250g
Supplied with detailed Instructions and Spreader
Fibre Reinforced Hole Bridging Filler • Developed for filling and bridging holes, splits & cracks in body panels & bumpers. • Ideal for repairing rust damaged areas: rusted wings, rust bubbles, wheel and door edges etc
DV
T
EC
ANCED
DAMAGED AND DENTED BODYWORK
GY
A
ADVANCED FILLER APPLIED OVER THE TOP OF FIBRE REINFORCED FILLER SO IT CAN BE SANDED TO A SMOOTH FINISH READY FOR PRIMING & PAINTING
HNOLO
Rusted Wheel Arch
Rust Holes
Holed Panels 362g pot - 350g Filler/12g Hardener, Instructions and Applicator supplied
FIBRE REINFORCED FILLER PROVIDES STRUCTURAL SUPPORT
Great for repairing and reinforcing rusted wheel arches exposed edges, holed bodywork etc
D ERE INE ANY G N E ERM IN G
• Gives structural strength to any repair • Ultra strong adhesion to bodywork • Impact resistant, fast setting and waterproof • Provides a secure platform to build up layers of body filler for a smooth surface finish • Perfect for filling rust damage areas and rust spots • Can be used on steel or alloy body panels, plastic bumpers and glass fibre (GRP)
Part number Description ER00105 Fibre Reinforced Hole Bridging Filler - 362g
Plastic Bumper and Trim Repair Putty The perfect repair solution for cracked, split and holed plastic bumpers and trim.
TE
Supplied with detailed Instructions, Hardener and Spreader
ANO GY
N
D ERE INE NY ENG ERMA IN G
C H N OLO
• Excellent adhesion to original bumper • Ultra fine formula eliminates air bubbles and provides a smooth finish • Easy to sand and shape to original bumper contours • Can be painted • Simple and easy to use and apply • Good flexibility and fast setting • Can be used on all types of plastic bumpers, wheel arches and most other automotive plastic trim parts
Ideal for cracked, holed or split front and rear bumpers
Part number Description ER00101 Plastic Bumper and Trim Repair Putty - 250g (242g putty/8g hardener)
Sales 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com
5
REPAIR&
RESTORATION
Repair & Restoration Product Range Technik 2 in 1 Filler & Primer
Fills minor scuffs, scratches and surface imperfections up to 500 microns (µ), 0.5mm / ½mm while at the same time primes the surface so it is ready to accept the top coat of paint
D ERE INE ANY G N M E ER IN G
BODYWORK PRIMER PAINT
DAMAGED AREA
Ideal for minor scuffs and scratches
Damaged area filled, primed and ready for painting
ANCED
GY
AD
V • Perfect for filled and sanded surfaces • Ideal for smoothing out textured or rough surfaces TE CH NOLO • The ‘High build’ nature of this product and easy sanding provide great surface levelling properties • Excellent foundation for the top coat of paint • Can be used on most painted or unpainted metal surfaces, rigid plastics, GRP (Glass Fibre), wood and masonry
DAMAGED AREA BEING FILLED AND PRIMED
Use to a max depth of 500 microns (µ) 0.5mm • ½mm
N IO OS RR LA CO MU TI OR AN F
Flattens out uneven textured surfaces
Part number Description ER00108 Technik 2 in 1 Filler & Primer - 400ml
Technik Repaired Surface Primer D ERE INE ANY G N E ERM IN G
Specially developed for repaired, restored and filled surfaces Ideal for rigid or flexible bumpers
VA
TE
N IO OS RR LA CO MU TI OR AN F
6
NCED GY
AD
BEFORE PRIMING
C H N OLO
AFTER PRIMING
PRIMED AND READY FOR PAINTING
1
DEEP CLEANED AND PLASTIC PRE-PRIMED
• Excellent adhesion qualities for all types of filler • Provides a firm foundation for the top coat of paint • Good flexibility and can be used on semi-rigid surfaces like plastic bumpers • Quick drying with great coverage • Can be used on fillers & putties, metal surfaces (painted or unpainted), most plastics, GRP (Glass Fibre), masonry & wood Part number Description ER00109 Technik Repaired Surface Primer - 500ml
Sales 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com
3
TOP COAT
2 PRIMED Professional paint and body shop application
PRIMED AREA Wide range of applications including: refurbishing alloy wheels and bumper repairs
REPAIR&
RESTORATION
Repair & Restoration Product Range Technik Surface Deep Cleaner
Specially developed by Professional Paint & Bodyshops for DIY use If you are performing any repair or restoration work to your vehicle, or sticking anything to it, the first step is to clean the surface you are going to be working on properly. Our Surface Deep Cleaner is the perfect product for this job.
• Quickly and effectively removes all traces of polish, wax, silicone, oil, grease, tar, insects & adhesive residue • Developed to enhance the adhesion of fillers, primers and the top coat of paint Ideal for fine • Safe to use on painted surfaces detail cleaning • Used by professional car valeting companies for a really effective surface deep clean
D ERE INE NY ENG ERMA IN G
Ideal for deep cleaning damaged & repaired areas before priming and painting
CH
VA NCE
Safe to use on carbon and composite surfaces
D
TE
VE TI EC FF AN &E LE K C IC EEP QU D
AD
NOLOG
Part number Description ER00102 Technik Surface Deep Cleaner - 400ml
Y
Technik Plastic Transparent Pre-Primer
Specially developed to prepare all plastic surfaces for priming and painting
PLASTIC PRE-PRIMER APPLIED 1
RED
E • Ideal for use on flexible & rigid plastics INE NY ENG ERMA G • Seals plastic surfaces and ensures a strong IN foundation for the primer and top coat of paint • Fast drying with advanced paint adhesion promoter • Increases the chip resistance of top coat of paint • Specially developed by professional paint and body shops for DIY use
Perfect for flexible plastic bumpers
2
PRIMER
3
TOP COAT OF PAINT Fog Lamp Housing - before and after NS
I EB
ELI HE
W
PL
TIC
AS
S
IR
A CH
NG TI IN PA TIC ES AS LE AK L P M P SIM
Ideal preparation for most plastics before painting
GREAT STYLING UPGRADE
Part number Description ER00110 Technik Plastic Pre-Primer - 400ml
Ideal for preparing plastic trim: vents, grilles, fog lamp housings etc, prior to painting
Vents
Grilles
Sales 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com
7
REPAIR&
RESTORATION
Repair & Restoration Product Range Technik Rust Preventer
Protects exposed and exterior metal & steel surfaces from rust and corrosion
ED
A ADV NC TE
C
HN
Y PL AP T TO FAS G SY D IN EA AN RY D
For brackets, parts, components etc
Rust protection for bodywork and panels
Construction and Industrial applications
Protection for vehicle chassis and sub-frames
Part number Description ER00111 Technik Rust Preventer - 500ml
D ERE INE ORM G N F E ER TO P
OLOGY
• Enriched zinc particles electro-chemically bond to the surface creating an impenetrable barrier against atmospheric moisture • Perfect for vehicle repair and restoration where preventing corrosion is a priority • Resistant to moisture, UV rays, road salt, oil, extreme weather conditions and temperstures up to 350°C • Suitable for coating and touching up galvanised surfaces • Prevents corrosion between spot welds • Once applied maintains excellent welding conductivity
Technik Self-Etch Primer
Specially developed to allow notoriously difficult surfaces to be painted such as: • Aluminium • Stainless Steel • Galvanised, treated or untreated steel • Bare Metals • Fibre Glass
NC VA ED
ES IM PR P & STE ES NE CH O ET IN
TE
8
GY
AD
• Chemically etches the surface creating a firm foundation for primer and paint • Microscopically impregnates the first few microns of the surface promoting excellent primer and paint adhesion • Ideal for restoration and refurbishment of alloy wheels
CHNO
LO
When spread on to a surface a chemical process starts and the acid content impregnates the top layer of the surface and provides a firm foundation.Compatible with virtually any primer or top coat of paint.
For alloy wheel refurbishments & alloy surfaces
Engineering and industrial applications Part number Description ER00112 Technik Self-Etch Primer - 400ml
Sales 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com
D ERE INE ORM G N F E ER TO P
For machined or polished steel surfaces
For glass fibre and composite surfaces
REPAIR&
RESTORATION
Repair & Restoration Accessories
TOP COAT OF PAINT The manufacturer’s colour code for your vehicle will be on the VIN plate/chassis plate (refer to vehicle owner’s hand book to locate this information) or you could ask your local dealer for your paint colour code. Contact a good local motor factor who mixes paint on their premises and they will be able to provide you the exact colour match in an aerosol for DIY application (use).
Additional Tubes of Hardener for E-Tech Body Fillers The same hardener is suitable for all E-Tech Fillers. Part number ER-H12G ER-H25G ER-H50G
10 Pairs of Disposable Gloves
Description 12g 25g 50g
5 Piece Diamond File Set Part number ER-FILES
Description Diamond File Set - 5 piece Part number Description ER-GLOVESX10 10 pairs of Disposable Gloves
Surface Cleaning Sachets Part number ER-CSACHETX10 ER-CSACHETX25 ER-CSACHETX100
Abrasive Paper Pack 3 sheets of abrasive paper - fine, medium and coarse.
Part number ERA/PAPER
Description 10 Surface Cleaning Sachets 25 Surface Cleaning Sachets 100 Surface Cleaning Sachets
MEDIUM FINE
COARSE Description One sheet of each: Sheet size: 230x280mm - Fine and Medium Sheet size: 115x280mm - Coarse
Applicators/Spreaders Set of 3 applicators/spreaders for use when applying body fillers or putties. Size: 75mmx 95mm
Part number ER/SPRD
Description 3 Applicators/Spreaders
Mixing Sticks Set of 10 wooden sticks for use when mixing fillers & hardeners. Part number ER-MIX
Description Pack of 10 mixing sticks
Foam Detail Cleaning Swabs Ideal for cleaning in small spaces or recesses, particularly air vents and grilles. Shaped foam swab on a 140mm stick. Supplied in packs of 10 Part number AIL669
Description Foam Detail Cleaning Swabs Pack of 10
Sales 01525 382713 • Email: sales@autoinparts.com • Web: www.autoinparts.com
9