Motion Control Optimization

Motion Control Optimization

1. Tuning with the External Switch

Users can set operation setting easily with external adjuster. (Gain, speed filter, in-position, resolution)

1) Speed Filter, Position Gain Setting

Users can minimize vibration and noise by changing the settings for speed filter and position gain values.

2) In-Position Setting

Operation speed and accuracy setting is possible by changing the position set range.

3) Resolution Setting

Operation precision setting is possible by changing the resolution between 500 and 10,000.

2. High Torque Drive Control (AC model)

AC power supply closed loop stepper motor system can maintain higher torque during high speed drive compared to DC type motors and be applied to machinery required big power.

3. Torque Control Mode (AC model)

Torque control mode allows accurate operation of machinery by maintaining the initial torque set during motor operation.

4. Auto Current Down Mode (AC model)

Auto current down mode reduces the electric current when the motor stops (no load) to minimize heat generation.

5. atMotion, Motion Control Software

atMotion is a comprehensive motion control management software for managing Autonics motion devices. Connecting the drivers allows users to easily configure parameters and monitoring, and operation test.