AMS series
AMS12
model
AMS series
Tecnare | 2
AMS Series
AMS12 · AMS15 · SW218V
Tecnare AMS Series (Arrayable Multipurpose Speaker) have been released to be the most versatile sound system solution for all kind of audio applications. Doing every job with a single tool is not an easy task, but AMS incorporate several solutions that make these systems the perfect solution for versatility and ease of use. AMS can be used as a full range stand alone speaker box, or as an scalable high output coherent radiating module element in either vertical and horizontal array systems. Thanks to the wide range of accesories, the compact and flexible design, as well as the availability of selfpowered PCC dsp software control technology involved, makes AMS ideal for nearly every high end audio application. AMS Series is formed by AMS12, AMS15 and SW218V hybrid double subwoofer. The
system can be passive (AMS), or self-powered with remote PC control (AMS PCC).
AMS PCC is a self-powered speaker, controlled in real time with a built inside DSP (PCC
tecnology Original, Cobranet, OR Advanced Series), with features such as fully parametric eqs, delay, crossover, compressors, gain controls, 30 band graphics eq, phase response alignment circuitry, on each speaker, individually controlled. With the mouse of a small laptop, the sound engineer can vary, in real time, any of the parameters on each of the speakers. After starting TECNARE software, the system will identify the speakers connected to the net, showing them in the network window of the program. It is only necessary to choose the speaker to be managed, and different windows will be available for the sound engineer to control everything. The program allows the storage of as many presets as desired, which can be loaded at any time, ten of them without using the software, by only clicking on the rear panel. Through this technique of operating, sound systems become much more flexible. A lot of patching is avoided reducing rack controls drastically. At the same time, equalization, crossovering, limiting, delay etc of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way with a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response, while modifying any of the various audio controls available on the system.
Tecnare | 3
AMS12
AMS12 is a flexible multipurpose loudspeaker enclosure, designed for use in mobile or fixed sound reinforcement. It can be used as a full range stand alone speaker box, or as an scalable high output coherent radiating module element in either vertical and horizontal array systems. Thanks to the wide range of accesories, the compact and flexible design, as well as the availability of selfpowered PCC dsp software control technology involved, makes AMS12 ideal for nearly every high end audio application. The design includes a powerful neodimium 3” voice coil 12” speaker CAD tuned into a vented box, and a 1.4” exit neodimium compression driver coupled to a rotatable constant Q high frequency horn. The system can be passive (AMS12), or self-powered with remote PC control (AMS12 PCC).
AMS12 PCC is self-powered with two
way amplification and is controlled with a DSP (Original, Cobranet, OR Advanced Series) built inside, with features such as fully parametric eqs, delay, crossover, compressors,
gain
controls,
30
band
graphics eq, phase response alignment circuitry, etc.
Tecnare | 4
AMS12
ENGINEERING SPECIFICATIONS
With the mouse of a small laptop, the
FREQUENCY RESPONSE: 48 Hz – 19
sound engineer can vary, in real time, any
kHz ± 3dB, measured on axys.
of the parameters on each of the speakers.
NOMINAL DISPERSION: 90°H x 30°V@-
After starting TECNARE software, the system
6db points. Rotatable horn allows swap of
will identify the speakers connected to the
horizontal and vertical pattern.
net, showing them in the network window of
IMPEDANCE: 8 Ohm.
the program. It is only necessary to choose
SENSITIVITY: 103 dB (1w/1m).
the speaker to be managed, and different
CALCULATED MAX SPL: 132 dB
windows will be available for the sound
continuous.
engineer to control everything.
POWER HANDLING: #580 W AES
The program allows the storage of as many
nominal.
presets as desired, which can be loaded at any time, ten of them without using the software, by only clicking on the rear panel. Through this technique of operating, sound systems become much more flexible. A lot of patching is avoided reducing rack controls
drastically.
At
the
same
time,
equalization, crossovering, limiting, delay etc of each box no longer have to be the same, without the hieroglyphic needed to do that in a conventional way with a complex installation. The system incorporates as standard a very powerful audio analyzer. The sound engineer can check the system’s response,
DIMENSIONS (HxWxD): 705x395x420mm. NET WEIGHT: 24 kg passive version, 30 kg PCC version including rigging accesories. COMPONENTS: 1x12” LF driver, 1x1.4” HF driver on a rotatable Constant Q horn. CONSTRUCTION: 16mm birch plywood. Finished in black semi-matt textured weatherized coating. Two recessed carrying handle.
while modifying any of the various audio controls available on the system. Flying hardware provision, handles and a recessed floor stand socket are included as standard. The enclosure has been made with the latest techniques ensuring a perfect and rigid construction. Weatherized finish is provided, as the cabinet is coated with rugged Durawound texture finish and protected with specially treated grills.
GRILLE: Powder coated perforated steel with acoustically transparent reticulated cloth. AMPLIFIER TYPE: Class H inc SMPA and networked DSP. POWER OUTPUT: 620 watts continuous @ 8 ohms (1kHz, 0.01% THD) +220 watts continuous @ 8 ohms (1kHz, 0.01% THD) # 2 hours test made with continuous pink. noise signal (6 dB crest factor). * Power calculated on rated minimum impedance. * Power on Continuous Program is defined as 3 dB greater than the nominal rating.
Tecnare | 5
DATASHEET FREQUENCY RESPONSE & MINIMUM PHASE
HORIZONTAL COVERAGE
VERTICAL COVERAGE
Tecnare | 6
Original Series
SOFTWARE CONTROL SCREENS Cobranet Series
Advanced Series
De erspien duntur molum utemperum qui dunt perum excernat voluptas nullor aut re laut et volupic tem sint am la voloremquo quaes dolum cum qui cuptatenis pliciis quiatium consequisque laborporese ellaut as el ius minis digendiae eatis debis amus dolenis ipsaecuptia dus. Explibusapel mo digendempore pel magnisqui tecabo. Nequiatiorem rerorer ectestium quiandi quiscip sumquam
Tecnare | 7
www.avancecreativo.com
AMS12 by AMS Series
C/ Encinar 282 - Pol. Ind. Monte Boyal 45950 Casarrubios del Monte SPAIN Phone.: 34 918 170 110 34 918 171 001 Fax: 34 918 183 053 www.tecnare.com