Vuototecnica by AVS Danmark

OCTOPUS GRIPPING SYSTEM COMPOSITION AND RELATIVE IDENTIFICATION CODES The OCTOPUS systems described in the following pages are equipped, as a standard, with suction plates PX. Should you want to replace these plates with others with different features you will have to modify the identification codes as described below.

Vacuum generator (to be ordered separately)

art. PVP 150 MD

OCTUPUS system base box

art. SO 30 40

With suction plate With suction plate

art. SO 30 40 X art. SO 30 40 2X

PX P2X

With suction plate PX and shut-off valves With suction plate P2X and shut-off valves

art. SO 30 40 XE art. SO 30 40 2XE

With suction plate With suction plate

PY P2Y

art. SO 30 40 Y art. SO 30 40 2Y

With suction plate With suction plate

PY and shut-off valves P2Y and shut-off valves

art. SO 30 40 Y2E art. SO 30 40 2Y2E

With suction plate With suction plate

PZ P2Z

art. SO 30 40 Z art. SO 30 40 2Z

With suction plate PV (1/8” vacuum cup supports included; vacuum cups not included)

art. SO 30 40 V

With suction plate PV and shut-off valves (1/8” vacuum cup supports included; vacuum cups not included)

art. SO 30 40 VE

With suction plate P2V (1/4” vacuum cup supports included; vacuum cups not included)

art. SO 30 40 2V

With suction plate P2V and shut-off valves (1/4” vacuum cup supports included; vacuum cups not included)

art. SO 30 40 2V2E

With suction plate

art. SO 30 40 J

3D drawings available at www.vuototecnica.net

Example regarding a composition of a standard OCTOPUS system with a 300x400 mm gripping surface:

9.01

OCTOPUS GRIPPING SYSTEM COMPOSITION AND RELATIVE IDENTIFICATION CODES

Example regarding a composition of an OCTOPUS system with a suction plate P2Y equipped with vacuum generator: n° 1 PVP 150 MD n° 1 SO 30 40 2Y Example regarding a composition of an OCTOPUS system with suction plate P2V equipped with silicon vacuum cups and a vacuum: generator: n° 1 PVP 150 MD n° 1 SO 30 40 2V n° 36 01 40 42 S Example regarding a composition of an OCTOPUS system with suction plate PX and shut-off valves equipped with vacuum generator: n° 1 PVP 150 MD n° 1 SO 30 40 XE VACUUM GENERATORS USED ON OCTOPUS SYSTEMS The standard OCTOPUS gripping system generators indicated in the tables, despite not being built-in the system, have been carefully selected following the assessment the best ratio between performance and compressed air consumption; To replace them with others with different features, please contact our technical department.

3D drawings available at www.vuototecnica.net

FIXING AND CONNECTION ALTERNATIVES The OCTOPUS system can be connected to a remotely installed vacuum generator or to an alternative vacuum source by fixing one of the special flanged support described in the following pages instead of the generator.

9.02

OCTOPUS GRIPPING SYSTEM The OCTOPUS system is our answer to the ever increasing requirements of operational flexibility for palletising robots and vacuum gripping systems in general. This system, in fact, it allows gripping objects of any shape and feature, provided that they do not have an excessive transpiration, without having to change or place vacuum cups, and even when their surface occupies only 5% of the whole suction plate. The maximum weight of the load to be lifted will obviously be proportional to the gripping system. The standard OCTOPUS systems described in these pages are composed of: - A compressed air-fed vacuum generator as shown in the picture and in the drawing, that has to be ordered separately, since it is not included in the code. - An anodised aluminium box, open on one side, with a built-in micro-fine stainless steel mesh filtre on the suction inlet to protect the vacuum generator, very easy to inspect. On the outside of the box there are one or more connections for the possible installation of control devices or solenoid valves for a prompt restoration of the atmospheric pressure on its inside. - A suction plate sealing the box also made with anodised aluminium and coated with a special perforated foam rubber. This suction plate perfectly adapts itself to any surface, either smooth, rough or uneven. With the same system, for instance, it is possible to grip and handle cardboard boxes and the wooden pallet that supports it. These OCTOPUS systems can be supplied, upon request, with other dimensions, suction plates and vacuum generators than those indicated in the tables.

Vacuum generator

Vacuum gauge

G1/4 connection for air inlet

Compressed air connection

art. Kg art. bar (g) -KPa Nl/s cum/h °C Kg ext. Ø Ø

SO 15 20 MX PX 15 20 21.2 PVP 25 MX 6 90 3.2 31.0 -20 / +80 2.1 8 N° 4 x G1/4”

3D drawings available at www.vuototecnica.net

Art. Suction plate Gripping force Vacuum generator Max. supply pressure Max. vacuum level Air consumption at 6 bar (g) Quantity of sucked air Working temperature Weight P Compressed air pipe connection R Exhaust connection

Note: The code SO 15 20 X exclusively identifies the OCTOPUS system base box with the associated suction plate PX. The vacuum generator indicated in the table is not integral part of the OCTOPUS system and therefore, must be ordered separately with its proper code. All the values shown in the table are valid at a normal atmospheric pressure of 1013 mbar and obtained with a constant supply pressure. Conversion ratio: inch = mm ; pounds = g = Kg 25.4 453.6 0.4536

9.03

OCTOPUS GRIPPING SYSTEM

Vacuum Vacuum generator gauge

Pressure gauge

Compressed air connection

3D drawings available at www.vuototecnica.net

G1/2 connection for air inlet

Art. Suction plate Gripping force Vacuum generator Max. supply pressure Max. vacuum level Air consumption at 6 bar (g) Quantity of sucked air Working temperature Weight A E F G H P Compressed air pipe connection

art. Kg art. bar (g) -KPa Nl/s cum/h Â°C Kg

ext. Ă&#x2DC;

SO 20 30 X PX 20 30 42.4 PVP 100 M 6 90 9.8 108.0 -20 / +80 7.0 300 74 20 16 124 15

SO 20 40 X PX 20 40 56.6 PVP 140 M 6 90 13.0 152.0 -20 / +80 8.6 400 96 70 66 146 15

SO 20 60 X PX 20 60 84.8 PVP 200 M 6 90 19.4 200.0 -20 / +80 10.7 600 96 170 166 146 15

Note: The code SO.. .. X exclusively identifies the OCTOPUS system base box with the associated suction plate PX. The vacuum generator indicated in the table is not integral part of the OCTOPUS system and therefore, must be ordered separately with its proper code. All the values shown in the table are valid at a normal atmospheric pressure of 1013 mbar and obtained with a constant supply pressure. 9.04

g Conversion ratio: inch = mm ; pounds = = Kg 25.4 453.6 0.4536

OCTOPUS VACUUM GRIPPING SYSTEM

Pressure gauge

G1/2 connection for air inlet

Vacuum gauge

Art. Suction plate Gripping force Vacuum generator Max. supply pressure Max. vacuum level Air consumption at 6 bar (g) Quantity of sucked air Working temperature Weight A B C E F G P Compressed air pipe connection

art. Kg art. bar (g) -KPa Nl/s cum/h Â°C Kg

ext. Ă&#x2DC;

SO 30 30 X PX 30 30 63.6 PVP 150 MD 6 90 16.0 200.0 -20 / +80 11.5 300 300 138 88 50 15 15

SO 30 40 X PX 30 40 84.8 PVP 150 MD 6 90 16.0 200.0 -20 / +80 12.5 400 300 138 88 100 15 15

SO 30 50 X PX 30 50 106.0 PVP 300 MD 6 90 32.0 400.0 -20 / +80 15.0 500 300 158 108 150 15 15

SO 40 40 X PX 40 40 113.1 PVP 300 MD 6 90 32.0 400.0 -20 / +80 17.0 400 400 158 108 100 65 15

SO 40 60 X PX 40 60 169.6 PVP 300 MD 6 90 32.0 400.0 -20 / +80 19.0 600 400 158 108 200 65 15

3D drawings available at www.vuototecnica.net

Compressed air connection

9.05

OCTOPUS GRIPPING SYSTEM

G1/2 connection for air inlet

Vacuum gauge pressure gauge Vacuum generator

3D drawings available at www.vuototecnica.net

Compressed air connection Art. Suction plate Gripping force Vacuum generator Max. supply pressure Max. vacuum level Air consumption at 6 bar (g) Quantity of sucked air Working temperature Weight A B C D E H I P Compressed air pipe connection

art. Kg art. bar (g) -KPa Nl/s cum/h °C Kg

Ø ext. Ø

SO DO 35 X PX DO 35 65.4 PVP 170 M 6 90 16.3 182.0 -20 / +80 9.5 120 264 43 350 96 146 8.5 15

SO DO 50 X PX DO 50 139.6 PVP 300 MD 6 90 32.0 400.0 -20 / +80 17.0 270 200 150 500 108 158 10.5 15

Note: The code SO DO .. X exclusively identifies the OCTOPUS system base box with the associated suction plate PX. The vacuum generator indicated in the table is not integral part of the OCTOPUS system and therefore, must be ordered separately with its proper code. All the values shown in the table are valid at a normal atmospheric pressure of 1013 mbar and obtained with a constant supply pressure. 9.06

g Conversion ratio: inch = mm ; pounds = = Kg 25.4 453.6 0.4536

GAS-NPT thread adapters available at page 1.117

OCTOPUS VACUUM GRIPPING SYSTEM The OCTOPUS system is our answer to the ever increasing requirements of operational flexibility for palletising robots and vacuum gripping systems in general. This system, in fact, it allows gripping objects of any shape and feature, provided that they do not have an excessive transpiration, without having to change or place vacuum cups, and even when their surface occupies only 5% of the whole suction plate. The maximum weight of the load to be lifted will obviously be proportional to the gripping system. The standard OCTOPUS systems described in this page are composed of: - Two compressed air-fed vacuum generators, as shown in the picture and in the drawing, that has to be ordered separately, since they are not included in the code. - An anodised aluminium box, open on one side, with two built-in microfine stainless steel mesh filtres on the suction inlet to protect the vacuum generator, very easy to inspect. On the outside of the box there are one or more connections for the possible installation of control devices o solenoid valves for a prompt restoration of the atmospheric pressure on its inside. - Un suction plate sealing the box, also made with anodised aluminium and coated with a special perforated foam rubber. The suction plate perfectly adapts itself to any surface, either smooth, rough or uneven. With the same system, for instance, it is possible to grip and handle cardboard boxes and the wooden pallet that supports it. These OCTOPUS systems can be supplied, upon request, with other dimensions, suction plates and vacuum generators than those indicated in the tables.

Vacuum gauge

Compressed air connection

G1/2 connection for air inlet

Art. Suction plate Gripping force N° 2 vacuum generators Max. supply pressure Max. vacuum level Air consumption at 6 bar (g) Quantity of sucked air Working temperature Weight A B C F G H L P Compressed air pipe connection

art. Kg art. bar (g) -KPa Nl/s cum/h °C Kg

ext. Ø

SO 40 100 X PX 40 100 282.6 PVP 300 MD 6 90 64.0 800.0 -20 / +80 34.0 400 1000 120 100 108 158 220 15

Vacuum generator

SO 60 80 X PX 60 80 339.2 PVP 300 MD 6 90 64.0 800.0 -20 / +80 37.5 600 800 70 200 108 158 120 15

SO 60 120 X PX 60 120 508.7 PVP 450 MD 6 90 95.6 1160 -20 / +80 50.0 600 1200 170 200 130 180 320 22

Compressed air connection

SO 80 100 X PX 80 100 597.4 PVP 450 MD 6 90 95.6 1160 -20 / +80 53.5 800 1000 120 300 130 180 220 22

3D drawings available at www.vuototecnica.net

Pressure gauge

9.07

STANDARD SUCTION PLATES PX AND P2X FOR OCTOPUS SYSTEMS The suction plates PX described in this page are installed, as a standard, on all OCTOPUS systems and, therefore, can be supplied as a spare part. They are made with anodised aluminium and coated with special perforated foam rubber with two types of thickness: 15 mm, for suction plates of the PX range; 30 mm, for special suction plates of the P2X range. Their lifting force has been calculated considering a minimum vacuum level of -75 Kpa, the overall perforated surface on the foam rubber and a safety factor 3.

PX 15 20 PX 20 30 PX 20 40 PX 20 60 PX 30 30 PX 30 40 PX 30 50 PX 40 40 PX 40 60 PX 40 100 PX 60 80 PX 60 120 PX 80 100 PX DO 35 PX DO 50

Force Kg 21.2 42.4 56.6 84.8 63.6 84.8 106.0 113.1 169.6 282.6 339.2 508.7 597.4 65.4 139.6

150 200 200 200 300 300 300 400 400 400 600 600 800 -----

P2X 15 20 P2X 20 30 P2X 20 40 P2X 20 60 P2X 30 30 P2X 30 40 P2X 30 50 P2X 40 40 P2X 40 60 P2X 40 100 P2X 60 80 P2X 60 120 P2X 80 100 P2X DO 35 P2X DO 50

21.2 42.4 56.6 84.8 63.6 84.8 106.0 113.1 169.6 282.6 339.2 508.7 597.4 65.4 139.6

150 200 200 200 300 300 300 400 400 400 600 600 800 -----

3D drawings available at www.vuototecnica.net

Art.

9.08

D Ø --------------------------350 500

200 300 400 600 300 400 500 400 600 1000 800 1200 1000 -----

C Ø 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

15 15 15 15 15 15 15 15 15 15 15 15 15 15 15

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

Weight Kg 0.40 0.80 1.10 1.70 1.30 1.70 2.10 2.20 3.40 5.60 6.70 10.10 11.30 1.30 2.30

200 300 400 600 300 400 500 400 600 1000 800 1200 1000 -----

15 15 15 15 15 15 15 15 15 15 15 15 15 15 15

--------------------------350 500

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

35 35 35 35 35 35 35 35 35 35 35 35 35 35 35

0.44 0.89 1.21 1.77 1.36 1.78 2.22 2.41 3.55 5.96 7.18 10.73 11.93 1.49 2.48

g Conversion ratio: inch = mm ; pounds = = Kg 25.4 453.6 0.4536

STANDARD SUCTION PLATES WITH SHUT-OFF VALVES PXE AND P2XE, FOR OCTOPUS SYSTEMS

PXE 20 30 PXE 20 40 PXE 20 60 PXE 30 30 PXE 30 40 PXE 30 50 PXE 40 40 PXE 40 60 PXE 40 100 PXE 60 80 PXE 60 120 PXE 80 100 PXE DO 35 PXE DO 50

Force Kg 42.4 56.6 84.8 63.6 84.8 106.0 113.1 169.6 282.6 339.2 508.7 597.4 65.4 139.6

200 200 200 300 300 300 400 400 400 600 600 800 -----

P2XE 20 30 P2XE 20 40 P2XE 20 60 P2XE 30 30 P2XE 30 40 P2XE 30 50 P2XE 40 40 P2XE 40 60 P2XE 40 100 P2XE 60 80 P2XE 60 120 P2XE 80 100 P2XE DO 35 P2XE DO 50

42.4 56.6 84.8 63.6 84.8 106.0 113.1 169.6 282.6 339.2 508.7 597.4 65.4 139.6

200 200 200 300 300 300 400 400 400 600 600 800 -----

Art.

D Ø ------------------------350 500

300 400 600 300 400 500 400 600 1000 800 1200 1000 -----

C Ø 15 15 15 15 15 15 15 15 15 15 15 15 15 15

25 25 25 25 25 25 25 25 25 25 25 25 25 25

Nr. of Valves 96 128 192 144 192 240 256 384 656 768 1176 1353 148 308

Weight Kg 1.76 2.38 3.62 2.74 3.62 4.50 4.76 7.24 12.16 14.38 21.86 24.83 2.78 5.38

10 10 10 10 10 10 10 10 10 10 10 10 10 10

15 15 15 15 15 15 15 15 15 15 15 15 15 15

18 18 18 18 18 18 18 18 18 18 18 18 18 18

300 400 600 300 400 500 400 600 1000 800 1200 1000 -----

15 15 15 15 15 15 15 15 15 15 15 15 15 15

------------------------350 500

10 10 10 10 10 10 10 10 10 10 10 10 10 10

30 30 30 30 30 30 30 30 30 30 30 30 30 30

18 18 18 18 18 18 18 18 18 18 18 18 18 18

40 40 40 40 40 40 40 40 40 40 40 40 40 40

96 128 192 144 192 240 256 384 656 768 1176 1353 148 308

1.85 2.49 3.69 2.80 3.70 4.62 4.97 7.24 12.52 14.86 22.49 25.46 2.97 5.56

3D drawings available at www.vuototecnica.net

The suction plates described in this page are the same as the previously described ones. Their distinctive features are the shut-off valves inserted in each hole. In absence of an object to grip or in case of a defective grip of the foam rubber, the shut-off valves automatically close the suction inlet, thus preventing the vacuum level from decreasing on the other gripping holes. This feature allows reducing the vacuum generator capacity compared to the standard OCTOPUS systems, all to the benefit of energy saving.

Conversion ratio: inch = mm ; pounds = g = Kg 25.4 453.6 0.4536

9.09

SPECIAL SUCTION PLATES PY AND P2Y FOR OCTOPUS SYSTEMS Compared to the standard ones, these suction plates, given the same gripping surface, develop a greater force (art. PY) and can grip even very rough and uneven surfaces (art. P2Y). They are made with anodised aluminium and coated with special perforated foam rubber, with two types of thickness, upon request. They are perfectly interchangeable with the standard suction plates. Their lifting force has been calculated considering a minimum vacuum level of -75 Kpa, the overall perforated surface on the foam rubber and a safety factor 3.

PY 15 20 PY 20 30 PY 20 40 PY 20 60 PY 30 30 PY 30 40 PY 30 50 PY 40 40 PY 40 60 PY 40 100 PY 60 80 PY 60 120 PY 80 100 PY DO 35 PY DO 50

Force Kg 37.7 75.4 100.5 150.8 113.0 150.8 188.4 201.0 301.5 502.4 602.9 904.4 1037.3 100.5 213.5

150 200 200 200 300 300 300 400 400 400 600 600 800 -----

P2Y 15 20 P2Y 20 30 P2Y 20 40 P2Y 20 60 P2Y 30 30 P2Y 30 40 P2Y 30 50 P2Y 40 40 P2Y 40 60 P2Y 40 100 P2Y 60 80 P2Y 60 120 P2Y 80 100 P2Y DO 35 P2Y DO 50

37.7 75.4 100.5 150.8 113.0 150.8 188.4 201.0 301.5 502.4 602.9 904.4 1037.3 100.5 213.5

200 200 200 200 300 300 300 400 400 400 600 600 800 -----

3D drawings available at www.vuototecnica.net

Art.

9.10

D Ă&#x2DC; --------------------------350 500

200 300 400 600 300 400 500 400 600 1000 800 1200 1000 -----

C Ă&#x2DC; 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

15 15 15 15 15 15 15 15 15 15 15 15 15 15 15

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

Weight Kg 0.39 0.78 1.07 1.66 1.27 1.65 2.04 2.14 3.35 5.50 6.61 10.01 11.24 1.25 2.24

200 300 400 600 300 400 500 400 600 1000 800 1200 1000 -----

40 40 40 40 40 40 40 40 40 40 40 40 40 40 40

--------------------------350 500

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

35 35 35 35 35 35 35 35 35 35 35 35 35 35 35

0.42 0.85 1.15 1.69 1.30 1.68 2.10 2.29 3.45 5.80 7.01 10.60 11.81 1.39 2.36

g Conversion ratio: inch = mm ; pounds = = Kg 25.4 453.6 0.4536

SPECIAL SUCTION PLATES WITH SHUT-OFF VALVES PY2E AND P2Y2E, FOR OCTOPUS SYSTEMS

PY2E 20 30 PY2E 20 40 PY2E 20 60 PY2E 30 30 PY2E 30 40 PY2E 30 50 PY2E 40 40 PY2E 40 60 PY2E 40 100 PY2E 60 80 PY2E 60 120 PY2E 80 100 PY2E DO 35 PY2E DO 50

Force Kg 75.4 100.5 150.8 113.0 150.8 188.4 201.0 301.5 502.4 602.9 904.4 1037.3 100.5 213.5

200 200 200 300 300 300 400 400 400 600 600 800 -----

P2Y2E 20 30 P2Y2E 20 40 P2Y2E 20 60 P2Y2E 30 30 P2Y2E 30 40 P2Y2E 30 50 P2Y2E 40 40 P2Y2E 40 60 P2Y2E 40 100 P2Y2E 60 80 P2Y2E 60 120 P2Y2E 80 100 P2Y2E DO 35 P2Y2E DO 50

75.4 100.5 150.8 113.0 150.8 188.4 201.0 301.5 502.4 602.9 904.4 1037.3 100.5 213.5

200 200 200 300 300 300 400 400 400 600 600 800 -----

Art.

D Ø ------------------------350 500

300 400 600 300 400 500 400 600 1000 800 1200 1000 -----

C Ø 40 40 40 40 40 40 40 40 40 40 40 40 40 40

32 32 32 32 32 32 32 32 32 32 32 32 32 32

Nr. of Valves 24 32 48 36 48 60 64 96 160 192 288 320 32 76

Weight Kg 1.26 1.71 2.62 1.99 2.61 3.24 3.42 5.27 8.70 10.45 15.77 17.64 1.89 3.76

17 17 17 17 17 17 17 17 17 17 17 17 17 17

15 15 15 15 15 15 15 15 15 15 15 15 15 15

18 18 18 18 18 18 18 18 18 18 18 18 18 18

300 400 600 300 400 500 400 600 1000 800 1200 1000 -----

40 40 40 40 40 40 40 40 40 40 40 40 40 40

------------------------350 500

17 17 17 17 17 17 17 17 17 17 17 17 17 17

30 30 30 30 30 30 30 30 30 30 30 30 30 30

18 18 18 18 18 18 18 18 18 18 18 18 18 18

47 47 47 47 47 47 47 47 47 47 47 47 47 47

24 32 48 36 48 60 64 96 160 192 288 320 32 76

1.33 1.79 2.65 2.02 2.64 3.30 3.57 5.37 9.00 10.85 16.36 18.21 2.03 3.88

3D drawings available at www.vuototecnica.net

Conversion ratio: inch = mm ; pounds = g = Kg 25.4 453.6 0.4536

9.11

SPECIAL SUCTION PLATES PZ AND P2Z, FOR OCTOPUS SYSTEMS Among all the suction plates described up to now, these are the ones which develop the greatest lifting force given the same gripping surface and vacuum level. Moreover, the P2Z version is also able to grip very rough and uneven surfaces. They are made with light alloys and coated with special foam rubber with slot holes, with two types of thickness. They are perfectly interchangeable with the standard suction plates. Their lifting force has been calculated considering a minimum vacuum level of -75 Kpa, The overall surface of the slot holes on the foam rubber and a safety factor 3.

PZ 15 20 PZ 20 30 PZ 20 40 PZ 20 60 PZ 30 30 PZ 30 40 PZ 30 50 PZ 40 40 PZ 40 60 PZ 40 100 PZ 60 80 PZ 60 120 PZ 80 100 PZ DO 35 PZ DO 50

Force Kg 41.0 82.4 109.8 164.7 123.5 164.7 206.0 219.6 329.4 549.0 658.8 988.3 1143.1 126.9 271.1

150 200 200 200 300 300 300 400 400 400 600 600 800 -----

P2Z 15 20 P2Z 20 30 P2Z 20 40 P2Z 20 60 P2Z 30 30 P2Z 30 40 P2Z 30 50 P2Z 40 40 P2Z 40 60 P2Z 40 100 P2Z 60 80 P2Z 60 120 P2Z 80 100 P2Z DO 35 P2Z DO 50

41.0 82.4 109.8 164.7 123.5 164.7 206.0 219.6 329.4 549.0 658.8 988.3 1143.1 126.9 271.1

200 200 200 200 300 300 300 400 400 400 600 600 800 -----

3D drawings available at www.vuototecnica.net

Art.

9.12

D Ă&#x2DC; --------------------------350 500

200 300 400 600 300 400 500 400 600 1000 800 1200 1000 -----

C Ă&#x2DC; 42 42 42 42 42 42 42 42 42 42 42 42 42 42 42

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

15 15 15 15 15 15 15 15 15 15 15 15 15 15 15

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

Weight Kg 0.40 0.80 1.09 1.68 1.28 1.67 2.06 2.17 3.38 5.54 6.64 10.05 11.30 1.26 2.26

200 300 400 600 300 400 500 400 600 1000 800 1200 1000 -----

42 42 42 42 42 42 42 42 42 42 42 42 42 42 42

--------------------------350 500

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

35 35 35 35 35 35 35 35 35 35 35 35 35 35 35

0.44 0.88 1.18 1.72 1.33 1.71 2.14 2.32 3.48 5.84 7.05 10.64 11.85 1.42 2.39

g Conversion ratio: inch = mm ; pounds = = Kg 25.4 453.6 0.4536

VACUUM CUP SUCTION PLATES PV and P2V, FOR OCTOPUS SYSTEMS

Art. PV 15 20 PV 20 30 PV 20 40 PV 20 60 PV 30 30 PV 30 40 PV 30 50 PV 40 40 PV 40 60 PV 40 100 PV 60 80 PV 60 120 PV 80 100 PV DO 35 PV DO 50

Force Kg 30.2 60.5 80.6 121.0 90.7 121.0 151.2 167.0 242.0 413.3 483.9 740.8 852.4 93.2 194.0

150 200 200 200 300 300 300 400 400 400 600 600 800 -----

200 300 400 600 300 400 500 400 600 1000 800 1200 1000 -----

C Ø 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18

D Ø --------------------------350 500

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

36 36 36 36 36 36 36 36 36 36 36 36 36 36 36

41 41 41 41 41 41 41 41 41 41 41 41 41 41 41

Example Vacuum cup art. 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29

Nr. of cups 48 96 128 192 144 192 240 256 384 656 768 1176 1353 148 308

Weight Kg 0.54 1.13 1.54 2.37 1.80 2.37 2.94 3.09 4.74 7.89 9.38 14.21 16.03 1.81 3.37

Note: The code PV.. .. exclusively indicates the suction plate with the vacuum cup supports screwed on it. The vacuum cups indicated in the table or freely chosen are not integral part of the suction plate and therefore, must be ordered separately.

Conversion ratio: inch = mm ; pounds = g = Kg 25.4 453.6 0.4536

3D drawings available at www.vuototecnica.net

These suction plates provided with vacuum cups have been designed to ensure a better grip on uneven and very flexible surfaces (pasta or candy bags, blister or skin-film packs, thin cardboard boxes, etc.), which are difficult to grip with suction plates coated with foam rubber. We recommend using bellow cups. Thanks to their great flexibility, they adapt themselves to any gripping surface, following its profiles and movements during the lifting phase, guaranteeing a firm and safe grip. They are made with anodised aluminium, as are the vacuum cup supports screwed onto them, which are 1/8” gas supports for the PV version and 1/4”gas for the P2V version. The cups are cold assembled onto the supports with no adhesives and can be provided in other compounds. Also these suction plates are perfectly interchangeable with the standard ones. Their lifting force has been calculated considering a minimum vacuum level of -75 Kpa, the overall vacuum cup surface and a safety factor 3. Upon request, they can be provided with different cups, as long as the diameter does not exceed 22 mm for the PV suction plates and 45 mm for the P2V ones.

9.13

VACUUM CUP SUCTION PLATES P2V, FOR OCTOPUS SYSTEMS

3D drawings available at www.vuototecnica.net

Art. P2V 15 20 P2V 20 30 P2V 20 40 P2V 20 60 P2V 30 30 P2V 30 40 P2V 30 50 P2V 40 40 P2V 40 60 P2V 40 100 P2V 60 80 P2V 60 120 P2V 80 100 P2V DO 35 P2V DO 50

Force Kg 37.7 75.4 100.5 150.8 113.0 150.8 188.4 201.0 301.5 502.4 602.9 904.3 1004.8 100.5 213.5

150 200 200 200 300 300 300 400 400 400 600 600 800 -----

200 300 400 600 300 400 500 400 600 1000 800 1200 1000 -----

C Ø 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40

D Ø --------------------------350 500

5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5

56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5 56.5

Example Vacuum cup art. 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42

Nr. of cups 12 24 32 48 36 48 60 64 96 160 192 288 320 32 76

Weight Kg 0.56 1.12 1.67 2.24 1.68 2.24 2.80 3.34 4.48 8.35 8.96 13.44 16.70 1.67 3.17

Note: The code P2V.. .. exclusively indicates the suction plate with the vacuum cup supports screwed on it. The vacuum cups indicated in the table or freely chosen are not integral part of the suction plate and therefore, must be ordered separately.

9.14

g Conversion ratio: inch = mm ; pounds = = Kg 25.4 453.6 0.4536

VACUUM CUP SUCTION PLATES WITH SHUT-OFF VALVES PVE and P2V2E, FOR OCTOPUS SYSTEMS The suction plates described in this page are the same as the previous ones. Their distinctive features are the shut-off valves inserted in each cup support connection. In absence of an object to grip or in case of a defective grip of the foam rubber, the shut-off valves automatically close the suction inlet, thus preventing the vacuum level from decreasing on the other gripping holes. This feature allows reducing the vacuum generator capacity compared to the OCTOPUS systems without valves, all to the benefit of energy saving.

PVE 20 30 PVE 20 40 PVE 20 60 PVE 30 30 PVE 30 40 PVE 30 50 PVE 40 40 PVE 40 60 PVE 40 100 PVE 60 80 PVE 60 120 PVE 80 100 PVE DO 35 PVE DO 50

Force

Example

Kg 60.5 80.6 121.0 90.7 121.0 151.2 167.0 242.0 413.3 483.9 740.8 852.4 93.2 194.0

200 200 200 300 300 300 400 400 400 600 600 800 -----

300 400 600 300 400 500 400 600 1000 800 1200 1000 -----

Ø 18 18 18 18 18 18 18 18 18 18 18 18 18 18

Ø ------------------------350 500

10 10 10 10 10 10 10 10 10 10 10 10 10 10

36 36 36 36 36 36 36 36 36 36 36 36 36 36

18 18 18 18 18 18 18 18 18 18 18 18 18 18

46 46 46 46 46 46 46 46 46 46 46 46 46 46

Vacuum cup art. 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29

Nr. of Valves and cups 96 128 192 144 192 240 256 384 656 768 1176 1353 148 308

Weight Kg 2.09 2.82 4.18 3.24 4.18 6.27 5.64 8.36 14.45 17.06 25.97 29.56 3.29 6.45

3D drawings available at www.vuototecnica.net

Art.

Note: The code PVE.. .. exclusively indicates the suction plate with the vacuum cup supports screwed on it and the built-in shut-off valves. The vacuum cups indicated in the table or freely chosen are not integral part of the suction plate and therefore, must be ordered separately.

Conversion ratio: inch = mm ; pounds = g = Kg 25.4 453.6 0.4536

9.15

VACUUM CUP SUCTION PLATES WITH SHUT-OFF VALVES P2V2E, FOR OCTOPUS SYSTEMS

3D drawings available at www.vuototecnica.net

Art.

P2V2E 20 30 P2V2E 20 40 P2V2E 20 60 P2V2E 30 30 P2V2E 30 40 P2V2E 30 50 P2V2E 40 40 P2V2E 40 60 P2V2E 40 100 P2V2E 60 80 P2V2E 60 120 P2V2E 80 100 P2V2E DO 35 P2V2E DO 50

Force

Example

Kg 75.4 100.5 150.8 113.0 150.8 188.4 201.0 301.5 502.4 602.9 904.3 1004.8 100.5 213.5

200 200 200 300 300 300 400 400 400 600 600 800 -----

300 400 600 300 400 500 400 600 1000 800 1200 1000 -----

Ø 40 40 40 40 40 40 40 40 40 40 40 40 40 40

Ø ------------------------350 500

17 17 17 17 17 17 17 17 17 17 17 17 17 17

51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5 51.5

18 18 18 18 18 18 18 18 18 18 18 18 18 18

68.5 68.5 68.5 68.5 68.5 68.5 68.5 68.5 68.5 68.5 68.5 68.5 68.5 68.5

Vacuum cup art. 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42 01 40 42

Nr. of Valves and cups 24 32 48 36 48 60 64 96 160 192 288 320 32 76

Weight Kg 1.60 2.31 3.20 2.40 3.20 4.00 4.62 6.40 11.55 12.80 19.20 23.10 2.31 4.53

Note: The code P2V2E.. .. exclusively indicates the suction plate with the vacuum cup supports screwed on it and the built-in shut-off valves. The vacuum cups indicated in the table or freely chosen are not integral part of the suction plate and therefore, must be ordered separately.

9.16

g Conversion ratio: inch = mm ; pounds = = Kg 25.4 453.6 0.4536

BAG GRIPPING SUCTION PLATES PJ, FOR OCTOPUS SYSTEMS

Art. PJ 15 20 PJ 20 30 PJ 20 40 PJ 20 60 PJ 30 40 PJ 30 50 PJ 40 60

Force Kg 24.6 73.4 106.0 171.0 188.4 246.0 436.0

150 200 200 200 300 300 400

200 300 400 600 400 500 600

160 230 330 530 330 430 530

10 10 10 10 10 10 10

15 30 30 30 30 30 30

110 130 130 130 230 230 330

40 40 40 40 40 40 40

Weight Kg 0.46 0.92 1.25 1.84 1.84 2.30 3.68

Conversion ratio: inch = mm ; pounds = g = Kg 25.4 453.6 0.4536

3D drawings available at www.vuototecnica.net

These suction plates have been designed to allow gripping paper or plastic bags containing powders, granulated products, bulk products or liquids. These suction plates are associated with OCTOPUS systems that fully exploit their performance. They are made with anodised aluminium and are provided with a special foam rubber seal. They are perfectly interchangeable with the OCTOPUS system standard suction plates. The shapes of the seal and the face allow reducing bag deformation in the gripping phase, reducing vacuum loss to the minimum and guaranteeing the largest gripping surface possible. Their lifting force has been calculated considering a minimum vacuum level of -75 Kpa, the overall gripping surface enclosed in the seal and a safety factor 3.

9.17

FLANGED FIXING SUPPORT, FOR OCTOPUS SYSTEMS WITHOUT VACUUM GENERATOR The fixing supports described in this page have been designed to connect an OCTOPUS system to a remotely installed vacuum generator or to an alternative vacuum source. The anodised aluminium supports are provided with two flanges: one to fix the OCTOPUS system instead of the vacuum generator and the other to connect it to the machine. They are also equipped with connectors for direct connection to the OCTOPUS system, to the generator or to the alternative vacuum source, as well as to the vacuum level reading and control devices. The unused connections may be closed with special metal caps which they are equipped with. The flanged fixing supports are currently available in the versions described in this page and are suited for OCTOPUS systems that use the vacuum generators indicates next to the article: - Art. SO 00 02 PVP 100 ÷ 200M - Art. SO 00 05 PVP 150 ÷ 300MD - Art. SO 00 06 PVP 450 ÷ 600MD Note: The vacuum gauges and switches in the picture are not integral part of the supports.

3D drawings available at www.vuototecnica.net

8 M5 holes for fixing to the OCTOPUS bar Vaccum gauge and vacuum switch connections

Art. SO 00 02 SO 00 05 SO OO O6

9.18

100 150 150

100 120 145

210 150 150

80 130 130

10 10 10

194 134 134

8 8 8

76 96 121

12 12 12

50 75 75

M Ø G1” 1/2 G2” G2” 1/2

N Ø 8.5 8.5 8.5

Weight Kg 2.8 4.2 4.3

g Conversion ratio: inch = mm ; pounds = = Kg 25.4 453.6 0.4536

OCTOPUS VACUUM GRIPPING BARS OCTOPUS vacuum gripping bars are our answer to the ever increasing requirements of palletisation robots operational flexibility. They are composed of: - A slotted fixing plate,to allow a quick installation onto the machine and an easy placement with respect to the load to be lifted; - Two or three compressed air-fed vacuum generators, according to their size; - A box made with light alloy, sealed by a suction plate coated with special perforated foam rubber. The suction plate perfectly adapts itself to any surface, either smooth, rough or uneven. These bars allow gripping objects of any shape and feature, provided that they do not have an excessive transpiration, without having to change or place vacuum cups and even when their surface does not occupy the entire suction plate. The maximum weight of the load to be lifted will obviously be proportional with the gripping surface. The connections provided for are four: one provided with quick coupler, for supplying compressed air to the vacuum generator; one for the possible installation of a vacuum switch, and two, closed by a threaded cap, for the air inlet inside the OCTOPUS bar in the discharge phase, for a prompt restoration of the atmospheric pressure.

Vacuum generator

4 SSX 1/4 silencers

Vacuum switch G1/4 connection

art. Kg art. bar (g) -KPa Nl/s cum/h °C Kg

ext. Ø

BO O8 60 X PX 08 60 31.7 PVP 25 MX 6 90 6.4 62 -20 / +80 6 600 80 21 50 5.2 4.8 10 112 8

Vacuum generator

BO O8 80 X PX O8 80 42.2 PVP 25 MX 6 90 6.4 62 -20 / +80 8 800 80 21 50 5.2 4.8 10 112 8

3D drawings available at www.vuototecnica.net

Compressed air connection P

G1/4 connection for air inlet

Vacuum gauge

Note: The code BO 08 .. X, identifies the OCTOPUS bar (g) base box with the associated suction plate PX, the slotted support plate and the vacuum generators indicated in the table. All the values shown in the table are valid at a normal atmospheric pressure of 1013 mbar and obtained with a constant supply pressure. Conversion ratio: inch = mm ; pounds = g = Kg 25.4 453.6 0.4536

9.19

OCTOPUS GRIPPING BAR

3D drawings available at www.vuototecnica.net

Compressed air connection P

G1/4 connection for air inlet

Vacuum gauge

Vacuum generator

4 SSX 1/4 silencers

Vacuum switch G1/4 connection

art. Kg art. bar (g) -KPa Nl/s cum/h °C Kg

ext. Ø

BO 12 60 X PX 12 60 42.2 PVP 25 MX 6 90 6.4 62 -20 / +80 8.1 600 120 21 90 5.2 4.8 10 112 8

Vacuum generator

BO 12 80 X PX 12 80 56.3 PVP 25 MX 6 90 6.4 62 -20 / +80 10.8 800 120 21 90 5.2 4.8 10 112 8

Note: The code BO 12 .. X, identifies the OCTOPUS bar (g) base box with the associated suction plate PX, the slotted support plate and the vacuum generators indicated in the table. All the values shown in the table are valid at a normal atmospheric pressure of 1013 mbar and obtained with a constant supply pressure. 9.20

g Conversion ratio: inch = mm ; pounds = = Kg 25.4 453.6 0.4536

OCTOPUS GRIPPING BARS

Art. Suction plate Gripping force N° 3 vacuum generators Max. supply pressure Max. vacuum level Air consumption at 6 bar (g) Quantity of sucked air Working temperature Weight A B C D E F G H P Compressed air pipe connection

Vacuum generator

Vacuum switch G1/4 connection

art. Kg art. bar (g) -KPa Nl/s cum/h °C Kg

ext. Ø

BO 12 100 X PX 12 100 70.4 PVP 25 MX 6 90 9.6 93 -20 / +80 14.5 1000 120 21 90 5.2 4.8 10 112 8

4 SSX 1/4 silencers

Vacuum switch Vacuum generator G1/4 connection

BO 12 120 X PX 12 120 86.2 PVP 25 MX 6 90 9.6 93 -20 / +80 17.4 1200 120 21 90 5.2 4.8 10 112 8

3D drawings available at www.vuototecnica.net

Vacuum generator

Compressed air connection P

G1/4 connection for air inlet

Vacuum gauge

Note: The code BO 12 .. X, identifies the OCTOPUS bar base box with the associated suction plate PX, the slotted support plate and the vacuum generators indicated in the table. All the values shown in the table are valid at a normal atmospheric pressure of 1013 mbar and obtained with a constant supply pressure. Conversion ratio: inch = mm ; pounds = g = Kg 25.4 453.6 0.4536

9.21

STANDARD SUCTION PLATES PX E P2X, FOR OCTOPUS GRIPPING BARS

3D drawings available at www.vuototecnica.net

The suction plates PX described in this page are installed, as a standard, on all OCTOPUS gripping bars and, therefore, they can be supplied as a spare part. They are made with anodised aluminium and coated with special perforated foam rubber, with two types of thickness: 20 mm with suction plates of the PX range, 30 mm for special suction plates of the P2X range. Their lifting force has been calculated considering a minimum vacuum level of -75 Kpa, the overall perforated surface on the foam rubber and a safety factor 3.

PX 08 60 PX 08 80 PX 12 60 PX 12 80 PX 12 100 PX 12 120

Force Kg 31.7 42.2 42.2 56.3 70.4 86.2

80 80 120 120 120 120

P2X 08 60 P2X 08 80 P2X 12 60 P2X 12 80 P2X 12 100 P2X 12 120

31.7 42.2 42.2 56.3 70.4 86.2

80 80 120 120 120 120

Art.

9.22

600 800 600 800 1000 1200

C Ă&#x2DC; 15 15 15 15 15 15

5 5 5 5 5 5

20 20 20 20 20 20

25 25 25 25 25 25

Weight Kg 0.70 0.94 1.06 1.41 1.76 2.11

600 800 600 800 1000 1200

15 15 15 15 15 15

5 5 5 5 5 5

30 30 30 30 30 30

35 35 35 35 35 35

0.72 0.96 1.08 1.44 1.80 2.17

g Conversion ratio: inch = mm ; pounds = = Kg 25.4 453.6 0.4536

VACUUM CUP SUCTION PLATES PV FOR OCTOPUS GRIPPING BARS

Art. PV 08 60 PV 08 80 PV 12 60 PV 12 80 PV 12 100 PV 12 120

Force Kg 45.4 60.5 60.5 80.6 100.8 121.0

80 80 120 120 120 120

600 800 600 800 1000 1200

C Ă&#x2DC; 18 18 18 18 18 18

5 5 5 5 5 5

36 36 36 36 36 36

41 41 41 41 41 41

Example Vacuum cup art. 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29 01 18 29

Nr. of cups 72 96 96 128 160 192

Weight Kg 0.83 1.26 1.42 1.90 2.37 2.84

3D drawings available at www.vuototecnica.net

These suction plates provided with vacuum cups have been designed to ensure a better grip on uneven and very flexible surfaces (pasta or candy bags, blister or skin-film packs, thin cardboard boxes, etc.), which are difficult to grip with suction plates coated with foam rubber. We recommend using bellow cups. Thanks to their great flexibility, they adapt themselves to any gripping surface, following its profiles and movements during the lifting phase, guaranteeing a firm and safe grip. They are made with anodised aluminium, as are the 1/8â&#x20AC;? vacuum cup supports screwed onto them. The cups are cold assembled onto the supports with no adhesives and can be provided in other compounds. Also these suction plates are perfectly interchangeable with the standard ones. Their lifting force has been calculated considering a minimum vacuum level of -75 Kpa, the overall vacuum cup surface and a safety factor 3. Upon request, they can be provided with different cups, as long as the diameter does not exceed 22 mm.

9.23

SUCTION PLATES WITH SHUT-OFF VALVES PXE and P2XE, FOR OCTOPUS GRIPPING BARS

3D drawings available at www.vuototecnica.net

The suction plates described in this page are the same as the previously described ones. Their distinctive features are the shut-off valves inserted in each cup support connection. In absence of an object to grip or in case of a defective grip of the foam rubber, the shut-off valves automatically close the suction inlet, thus preventing the vacuum level from decreasing on the other gripping holes. This feature allows reducing the vacuum generator capacity compared to the OCTOPUS systems without valves, all to the benefit of energy saving.

PXE 08 60 PXE 08 80 PXE 12 60 PXE 12 80 PXE 12 100 PXE 12 120

Force Kg 43.7 60.0 42.1 57.7 73.3 88.9

80 80 120 120 120 120

P2XE 08 60 P2XE 08 80 P2XE 12 60 P2XE 12 80 P2XE 12 100 P2XE 12 120

43.7 60.0 42.1 57.7 73.3 88.9

80 80 120 120 120 120

Art.

600 800 600 800 1000 1200

C Ă&#x2DC; 20 20 20 20 20 20

25 25 25 25 25 25

Nr. of Valves 56 77 54 74 94 114

Weight Kg 1.69 2.25 2.53 3.38 4.22 5.07

10 10 10 10 10 10

20 20 20 20 20 20

18 18 18 18 18 18

600 800 600 800 1000 1200

20 20 20 20 20 20

10 10 10 10 10 10

30 30 30 30 30 30

18 18 18 18 18 18

40 40 40 40 40 40

56 77 54 74 94 114

1.72 2.29 2.58 3.44 4.30 5.16

9.24

LOCKING PLATES, FOR OCTOPUS GRIPPING BARS WITHOUT VACUUM GENERATOR The locking plate with manifold described in this page has been designed to connect an OCTOPUS gripping bar to a remotely installed vacuum generator or to an alternative vacuum source. This anodised aluminium plate is fixed with screws to the body of the OCTOPUS bar, instead of the generator. The manifold is equipped with connectors for a direct connection to the OCTOPUS bar, to the generator or to the alternative vacuum source, as well as to vacuum level reading and control devices. The unused connections can be closed with special metal caps which they are equipped with. The locking plate with manifold is suited for any kind of OCTOPUS gripping bar that uses PVP 12 MX and PVP 25 MX vacuum generators.

Art. 00 BO 07

For OCTOPUS gripping bars BO 08 60 X BO 08 80 X BO 12 60 X BO 12 80 X BO 12 100 X BO 12 120 X

Vacuum connection Vacuum Vacuum connection connection

Vacuum connection

1010 M5 M5 holes holes forfor fixing fixing toto the the OCTOPUS OCTOPUS bar bar

LOCKING PLATES FOR, OCTOPUS GRIPPING BARS WITHOUT VACUUM GENERATOR The locking plate described in this page has been created to close the suction holes on the OCTOPUS bar body and left free by the removal of the vacuum generator. This anodised aluminium plate is fixed with screws to the OCTOPUS bar instead of the generator. The gasket provides perfect seal. The locking plate with manifold is suited for any kind of OCTOPUS gripping bar that uses PVP 12 MX and PVP 25 MX vacuum generators.

For OCTOPUS gripping bars BO 08 60 X BO 08 80 X BO 12 60 X BO 12 80 X BO 12 100 X BO 12 120 X

3D drawings available at www.vuototecnica.net

Art. 00 BO 06

10 M5 holes for fixing to the OCTOPUS bar

Conversion ratio: inch = mm ; pounds = g = Kg 25.4 453.6 0.4536

9.25

ACCESSORIES AND SPARE PARTS FOR OCTOPUS GRIPPING SYSTEMS AND BARS

Digital vacuum switch with 1/8” axial gas coupler

Art. 12 10 10

Description Digital vacuum switch

Electric cable with axial connector

Art. 00 12 20

Description Digital vacuum switch electric connection cable with axial connector

Electric cable with radial connector

Art. 00 12 21

Description Digital vacuum switch electric connection cable with radial connector

Vacuum gauge Ø 40 mm with 1/8” axial gas coupler

Art.

3D drawings available at www.vuototecnica.net

09 03 15

Description Vacuum gauge

Pressure gauge Ø 40 mm with 1/8” axial gas coupler

Art. 09 03 25

Description Pressure gauge

9.26

SPARE PARTS FOR OCTOPUS GRIPPING SYSTEMS AND BARS

Silencer

Art. SSX 1/4”

For generator art. PVP 25 MX

Sealing kit and reed valves

Art. 00 KIT PVP 25 MX

For generator art. PVP 25 MX

Sealing kit and disc valves

00 KIT PVP 100 M 00 KIT PVP 140 M 00 KIT PVP 170 M 00 KIT PVP 200 M

Art. 00 KIT PVP 150 MD 00 KIT PVP 300 MD 00 KIT PVP 450 MD

For generator art. PVP 100 M PVP 140 M PVP 170 M PVP 200 M

3D drawings available at www.vuototecnica.net

Art.

For generator art. PVP 150 MD PVP 300 MD PVP 450 MD

9.27

SPARE PARTS FOR OCTOPUS GRIPPING SYSTEMS AND BARS

Stainless steel disc filtre

00 SO 05

D Ø 25

00 SO 10

00 SO 14

SO 30 30 - SO 30 40 - SO 30 50 - SO 40 40 SO 40 60 - SO DO 50 - SO 40 100 - SO 60 80 SO 60 120 - SO 80 100

D Ø 1.5 2.5

Weight g 4 4

Art.

For OCTOPUS system Ø SO 15 20 - BO 08 60 - BO 08 80 BO 12 60 - BO 12 80 - BO 12 100 - BO 12 120 SO 20 30 - SO 20 40 - SO 20 60 - SO DO 35

Cup supports Hex. 12

Art. 00 08 157 00 08 178

Art. 00 08 158

Art.

3D drawings available at www.vuototecnica.net

00 08 170

Support material aluminium aluminium

For cup art. 01 18 29 01 18 29

Weight g 8

Support material aluminium

For cup art. 01 40 42

Weight g 4

Support material aluminium

For cup art. 01 20 23

Shut-off valves

Art. 14 01 06 14 01 07

9.28

A Ø G1/4” G3/8”

B Ø G1/8” G1/4”

d Ø 3.25 4.50

g Conversion ratio: inch = mm ; pounds = = Kg 453.6 0.4536 25.4

D Ø 15 20

18 25

28 35

12 17

Weight g 10 24

Support material aluminium aluminium

GAS-NPT thread adapters available at page 1.117

mm 270x420 - SO 27 42 2V

mm 330x550 - SO 33 55 2V

mm Ø 100 - SO DO 10 X

mm 70x200 - SO 07 20 X

3D drawings available at www.vuototecnica.net

OCTOPUS GRIPPING SYSTEM SPECIAL EXECUTIONS

mm 200x1000 - SO 20 100 X

9.29

3D drawings available at www.vuototecnica.net

OCTOPUS GRIPPING SYSTEM SPECIAL EXECUTIONS

mm 300x360 with fixing support - SO 30 36 X

mm 70x140 with digital vacuum switch - SO 07 14 V

mm 210x360 SO 21 36 V with 3 independent chambers

mm Ă&#x2DC;400 with fixing support and vacuum interception solenoid valve - SO DO 40 V

mm 600x1200 00x1200 with 2 independent chambers - SO 60 120 X 9.30

OCTOPUS GRIPPING SYSTEM SPECIAL EXECUTIONS

3D drawings available at www.vuototecnica.net

mm 620x1240 with 12 independent chambers - SO 62 127 2V

9.31