http://www.odys.de/downloads/manuals/ODYS%20PDV%2068502%20-%20User%20Manual%20english by Andreas Nalepa

Important Safety Instructions

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE.

CAUTION: Laser radiation when open. Do not stare into beam. CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. POWER SUPPLY: Connect the supplied adapter to the side of the DVD player in the slot marked “Power In”. Plug the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug, turn it over and reinsert it, if the unit will not the used for a long time, disconnect the plug from the outlet. NOTE: Before plugging the power cord into an AC outlet, make sure that all the connections have been made.

Important Safety Instructions CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer to service manual for servicing instructions. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Maintain well ventilated conditions around the product, Do not put product on bed, sofa or anything that blocks ventilation. Install in accordance with the manufacturerâ&#x20AC;&#x2122;s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Note: Do not touch the color TFT LCD screen by hand directly.

Important Safety Instructions Copyright Protection This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit. Leave all servicing to qualified service personnel. Region code information DVD players and discs are coded by region. If the region number described on the DVD disc does not correspond to the region number of this product, this product cannot play the disc. The region code of this unit is 2.

Features This product is designed portability and handily, with a stylish appearance. It incorporates DVD player and DVB-T function in one system. It is conveniently for using and taking.

High-quality audio and video AV In: External Audio, Video input can be connected to most external AV sources. AV Out: Analog Audio output and video output.

Excellent sound: Dolby Digital delivers great sound.

Advanced Playing Functions Compatibility: Compatible with DVD, CD, MP3ďź&#x152;PICTURE CD and MPEG4 disks

On-screen Display: You can choose from English, Spanish, French etc for On-screen Display language.

Particular Performance: Multi-speed, fast forward, fast backward and slow playback.

Search by Time: Search for a certain track of a disk by selected time.

Last Memory Playback: Memorize the stopped playback track and continue playing disk from this spot on power on status or without opening the disc tray cover.

Special Functions: Supports screen aspect ratio changing, zooming in or out pictures, multi-language caption, multi-angle.

Other Special Functions High Resolution: MPEG-2 decoding format achieves more than 500 lines of horizontal resolution.

Rating Features: Supports to lock out certain scenes of the disc, or lock out the whole disc depending on the contents of the disc.

Power Adapter Switch: Automatically adapts to voltage requirements in U.S and other countries.

Accessories Accessories List ITEM

NAME

QTY

Remote Control Unit

Cell for Remote Control

Ownerâ&#x20AC;&#x2122;s Manual

Power-supply Cord with AC adapter

Audio/Video Cable

DC Adapter (Car Adapter)

Rechargeable Battery

DVB Antenna

NOTE Accessories and their parts numbers are subject to modification without prior notice due to improvements.

Contents Important Safety Instructions

…………………………………………..1

Features

…………………………………………...4

Accessories

…………………………………………...5 …………………………………………...7

View of Main Unit View of Main Unit Bottom

………………………………….………..9

Using of USB and SD Card

………………………………………….10

Remote Control

…………………………………………..11

Preparation and Using of RC.

…………………………………………..13

System Connections

…………………………………………..14

Power Supply Preparation

…………………………………………..17

Rechargeable Battery

…………………………………………..18

Sketch Map of Bracket

…………………………………………..20

DVB Setup

…………………………………………..21

Notes on Discs

…………………………………………..28

Playback Operation

…………………………………………..29 DVD Playback …………………………………………..30 CD Playback …………………………………………..34

MP3 Playback …………………………………………..36 Picture CD Playback …..………………………………………38 MPEG4 Playback …………………………………………..41 System Setup

……………………………………….….44

Definitions

…………………………………………..50

Troubleshooting

…………………………………………..51

Specifications

…………………………………………..53

View of Main Unit Front,left and right View

POWER button Press to turn unit on or off. 2. MENU button In DVD-mode: Press to display the disc title menu if the titles are coded in the disc. In DVB-T mode: Press to display the channel guide. 3. PLAY/PAUSE button Press to start playback or pause the playback. 4. / button :When in a menu, press to select different items or to increase the level of brightness, contrast and color. : In DVD mode: Press to fast forward. Press repeatedly for 2x/4x/8x/20x normal playback speed 5. / Button :When in a menu, press to select different items to decrease the level of brightness, contrast and color. . : In DVD mode: Press to fast rewind. Press repeatedly for 2x/4x/8x/20x reverse playback speed 6. / /CH+ Button : Press to select different items in menuâ&#x20AC;&#x2122;s. : Press to go to next list/track/chapter in DVD mode. CH+: Press to search the channel forward in DVB mode.

View of Main Unit 7.

8. 9. 10.

11. 12. 13. 14. 15.

/ /CH- Button : Press to select different items in menu’s. : Press to return to the previous list/track/chapter in DVD mode. CH-: Press to search the channel backward in DVB mode. OK button Press to confirm your selection. Remote sensor Receive the signal from the remote control for operation. MODE button Press to change the brightness, contrast and color level. Press and hold to change the screen setting to 16:9,4:3,16:9 overturn and 4:3 overturn. Release the button when the desired screen setting is being displayed. Setup button Press to enter the system setup in the mode of the DVD or DVB mode. DVB / DVD / USB/SD switching button Press to realize the function switching among DVB, DVD,USB,SD. Speakers Two speakers output high quality sound. DC 9.5V IN Jack For connecting to power supply, including Car Adapter. HOLD button Push the HOLD switch to lock the function of all the buttons on the front panel.

16. USB slot.

It can be connected to the USB. 17. DVB-T ANT jacks. It can be connected to DVB-T antenna. 18. SD/MS/MMC card slot. 19. AV IN/OUT Switch Switch to AV IN to input the external AV source; switch to AV OUT to play the disc. 20. VIDEO input/output Jack Slide the AV IN/OUT button on the right panel to “input”, now it’s a VIDEO input Jack, when switched to “output”, it’s a VIDEO output Jack. 21. AUDIO input/output and optical digital output Jack Slide the AV IN/OUT button on the right panel to “input”, now it’s an AUDIO input Jack, when switched to “output”, it’s an AUDIO output Jack. 22. Headphone Jack When headphones are plugged into the unit, the speakers will automatically turn off. 23. VOLUME Control For regulating the sound level of Speakers or Headphones. 24. PUSH TO OPEN button Press to open disc tray.

View of Main Unit Bottom View of the bottom

1. 2.

Bracket Rechargeable Battery Pack.

Using of USB and SD Card 1. 2. 3. 4.

Connect the unit with the power supply. Press the “POWER” button to turn on the power. Press DVB / DVD / USB/SD button to enter USB or SD playback statement. Insert the USB into the unit’s USB slot on the left side of the unit, or insert the SD card into the SD card slot on the top of the unit. Please see the below figure:

Make sure that files of MP3, JPEG or MPEG4 format are stored in the USB and the SD card before the connection. ¾ Press the DVB/DVD/USB/SD button to switch among disc playback, USB playback and the SD playback. ¾ Press the / direction buttons to switch MP3, JPEG or MPEG4 playback statement, press ENTER/OK button to enter. ¾ Press the , button to select the folder, and press ENTER/OK button to enter. ¾ Press and buttons to select the desired track. Then press to start playback. ¾ Press STOP button to stop playback: if the STOP button is pressed, the playback will start from the beginning of the current track. Press the button to return to the folder menu. Pull out the USB or SD card directly after the MP3, JPEG or MPEG4 format files are played. Then the unit will be in the state of disc playback again. ¾

NOTE: the USB slot can not be used for camera with USB function or connected with other devices.

Remote Control

PWR button Press to turn unit on or off. 2. INFO button Press for detailed information in the DVD or DVB mode. 3. TITLE button Press to display title menu if the titles are coded in the disc. 4. Direction button/CH+/-button Press to select menu items or search the channel forward or backward in the DVB mode. 5. ENTER button Press to confirm your selection. 6ďź&#x17D; SETUP button Press to access the DVD or DVB system setup menu in the DVD or DVB mode. 7ďź&#x17D; 0-9 number buttons Select numbers by pressing these buttons. 8. button Press to go to the next track or chapter in the DVD mode.

Remote Control 9.

10. 11. 12. 13. 14.

15. 16 17.

18. 19. 20. 21. 22. 23. 24.

button/FAV-PR button Press to go to the beginning of current track or chapter. Press twice to go to the previous track or chapter in DVD mode. Press to enter the favorite programme in DVB mode. SUBT button Press to realize the subtitle switching function. ANGLE button/TELETEXT button Press to access various camera angles, if the DVD disc contains multiple camera angles in the DVD mode. Or press to display the teletext information in DVB mode. DVD/USB/SD/DVB switching button Press to realize the function switching among DVD,USB,SD,DVB. ZOOM button Press to realize various zoom functions. A-B button/LANGUAGE button Press to play a section of the disc from point A to point B. Press once to select the starting point (A), press again to select the end point (B). In A-B repeat playback, press this button to stop the repeat. Press a third time to stop the A-B Repeat. Or to realize Language switching in the DVB mode. MENU button Display the actual DVD Disc Menu on screen in playback mode. REP /PR-LIST button Press to repeat a chapter, track, title, or the entire disc in the DVD mode or enter the programme list in the DVB mode. STOP button/RETURN button Press once to stop playback. Press the PLAY button to resume normal playback. Press the button twice to stop playback completely in DVD mode.Press the STOP button to exit the searching process column in DVB mode. Press to return to the channel last viewed in DVB mode. PLAY/PAUSE button Press to start playback or pause the playback. +10 button Select number greater than 9 by pressing the (+10) button first, and then additional number button as needed. GOTO button/SEARCH button Press to select the desired disc starting time, track or title in the DVD mode or press to enter the auto scanning in the DVB mode. button/GUIDE button Press to fast search backward during playback in the DVD mode or enter the channel previewing in the DVB mode. button/EPG button Press to fast search forward during playback in DVD mode or enter the EPG menu in DVB mode. SLOW button/TV/RADIO button In DVD mode, press to activate slow playback or in the DVB-T mode, press to realize the switching between TV mode and radio mode. AUDIO button Press to access various audio languages, when the DVD disc contains multiple audio languages.Or press to realize the switching among MONO L,MONO R, STEREO in the DVB mode.

Preparation and Using of Remote Control Battery Installation Step With the remote control unit placed on a flat surface and follow the steps below to install the battery. Step1: Pull the battery holder out from the remote control in the direction of the arrow.

Step 2: Load a new battery properly with Its (+) sided up.

Step3: Insert the battery holder back into remote control

Battery Property Battery Type: CR2025 3V Battery service Life: Approximately 1 year under normal use (at room temperature).

Using of Remote Control 1.

2. 3. 4. 5. 6.

For best results, aim the remote control directly at the playerâ&#x20AC;&#x2122;s receiving window within the range of 15 feet and angles of 60 degree, and without obstacles between remote control and remote sensor. Improper use of the battery may cause overheating, and explosion or ignition, resulting in an injury or a fire. Battery leakage may damage the product. Do not expose the remote control unit to direct sunlight. Do not recharge, disassemble, deform or heat the battery. Do not put the battery in fire or water. Immediately replace used up battery.

System Connections z z

Always ensure that the DVD player, TV and any other electrical equipment that connecting with DVD player is switched off and unplugged from the power supply. Ensure that you observe the color coding when connecting audio and video cables.

Connecting to TV Audio/Video connections Please follow the drawings below to connect the DVD player to TV's Audio/Video inputs with Audio/Video cables.

Connecting to Amplifier Please refer to your Audio equipment's manual before connection. Please follow the drawings below to connect the DVD player to AV amplifier.

System Connections Connecting to External AV Source The unit supports AV signal input function. Please use the audio/video cable to connect the unit to the external AV signal source such as a DVD, VCR etc. after connecting, switch the AV IN/OUT to AV IN. Note: noise may occur in speakers when input an external audio signal while playing a DVD disc. Unplug the audio cord to clear the noise.

Connecting to Headphone Connect the headphone to the headphone jack on the right side of the unit.

Quick Tips: Excessively loud volume could damage your hearing. Turn down the volume before you connect the headphones, and then raise the volume to a comfortable level. Sound from the DVD Playerâ&#x20AC;&#x2122;s external speaker will stop when headphones are connected.

System Connections Connecting to DVB-T Antenna The unit is designed with an antenna input jack. Plug the DVB-T antenna into the jack on the left panel of the unit to receive TV signal. As shown below:

Power Supply Preparation Using of AC Adapter The player is supplied with an adapter. Take the following steps to use the adapter. 1.

Connect AC adapter to the right side Of the DVD player in the slot marked DC 9.5V IN (as the right figure).

Plug the two-prong end of the power cord to a grounded electrical socket, then the power indicator lights red.

Note: Please turn player's power off before unplugging. Note: In the case of using the adapter, the LCD screen will be lighter than with the rechargeable battery.

Using of Car Adapter You can use Car Adapter while in a vehicle, take the following steps to using the car adapter.

Connect the Car Adapter Power Plug to the unit's Power Jack and the other end to the Vehicle Cigarette Lighter Socket as the figure.

Attention 他他他他

Do not operate the unit or view video software while driving a vehicle. Place the unit in a proper position for viewing. Please detach battery pack when using car adapter as power source. We advise you to disconnect the player from the Cigarette Lighter at the instant of car start-up.

Your portable DVD player comes with a rechargeable lithium ion battery pack as optional accessory. Please see details in battery pack operation part of user's manual.

Rechargeable Battery

About Rechargeable Battery Pack Your portable DVD player comes with a lithium ion rechargeable battery that attaches to the rear of the DVD player. Charge the battery fully before initial use. Charging time is normally about 5 hours. A fully charged battery delivers about 3 hours of use, but playing time varies from disc to disc. If the battery will not be used for a long period of time, fully charge the battery prior to storage. Working conditions and precautions of the battery ¾ ¾

New batteries should be fully charged before initial use. Battery should only be used and charged when temperatures are between 32 100F.

Never put the battery in fire or water.

Do not expose the battery to high temperatures or store in hot, sunny places.

Maintain well-ventilated conditions around the product to avoid overheating. Don’t put the product on bed, sofa or anything that may block ventilation to the product.

Do not short the battery terminals.

Do not open the battery.

Detach the battery after charging is complete. When charging the battery pack, the charge light will turn red, when the charging is complete, the light will turn green.

¾ ¾

Detach the battery when not in use. When the battery is weak, about several minutes later, the player will power OFF automatically.

Warning: Do not touch any metal objects to the battery connectors, as it will put the battery in standby mode. To exit the standby mode, connect the battery and DVD player to AC or DC power

Rechargeable Battery Dettaching the Battery Pack Dettach the Battery Pack as the picture below:

Charging the Battery Pack 1. 2.

Attach the battery pack to the DVD player Plug the supplied AC Power Adapter into the player’s power jack marked with ”DC 9.5V IN”, which is located on right side of the DVD Player.

Plug the other end of the AC Power Adapter Cord into a household AC Outlet as shown below.

Sketch Map of Bracket Sketch Map of Bracket You can adjust the angle of viewing through opening the bracket. 1. Push the button to unlocking position as arrow 1. 2. Opening the bracket as arrow 2.

DVB Setup The Operation of DVB Setup Preparation: 1. Connect the unit to the power. 2. Press the DVB /DVD/ USB/SD switching button on the panel or remote control enter the DVB mode. 3. Press the Setup button on the panel or remote control enter the DVB setup mode. 4. You can take below steps to go on with the setup. When you enter the DVB mode, the screen will display the picture as below:

In this menu, press / direction buttons to select No/YES item, select NO exit the setup menu, select YES enter the further setup .

In this menu, press / direction buttons to select BACK/NEXT item, select BACK return to the previous setup, select NEXT enter the next setup .

Select Area Press the button to select the Select Area item, press the button to enter the item , press / direction buttons to select England, Italy, France, Spain etc. OSD Language Press the button to select the OSD Language item, press the button to enter the item , press / direction buttons to select English, French etc.

DVB Setup

In this menu, press / direction buttons to select BACK/YES/NO item, select BACK return to the previous setup, select Yes enter the next setup. select NO exit the setup menu.

Channel Guide Press the direction buttons to select Channel Guide. Press the OK button to enter the item, screen will display as below: In the menu, press the button to select the item you want to set up, press the OK button to enter the item. Press the Setup button to return to the previous menu.

System Config Press the direction buttons to select System Config. Press the OK button to enter the item, screen will display as below: In the menu, press the button to select the item you want to set up, press the OK button to enter the item. Press the Setup button to return to the previous menu.

DVB Setup TV Setting Press the button to select TV Setting, press the OK button to enter, the screen will display as below: There are two items for setting: TV system, TV Type. Press the button to select item, press the OK button to enter, press the Setup button to return. TV System: Press the button to select the TV System, press the OK button to enter the TV System Setting menu, press the button to select NTSC, PAL. Then press the OK button to confirm selection and return. During setting, press the Setup button to return. TV Type: Press the button to select the TV Type, press the OK button to enter the TV Type Setting menu, press the button to select 4:3PS, 4:3LB, 16:9. Then press the OK button to confirm selection and return. During setting, press the Setup button to return. Audio Setting Press the button to select Audio Setting, press the OK button to enter, the screen will display as below:

Audio Out: Press the OK button to enter the Audio Out Setting menu, press the button to select SPDIF/OFF, SPDIF/RAW, SPDIF/PCM. Language Press the button to select Language. Press the OK button to enter, the screen will display as below:

DVB Setup OSD Language: press the OK button to enter the OSD Language Setting menu, press the button to select English, German, Spanish, French, Portuguese, Italian and Dutch. Parent Control Press the button to select Parent Control, press the OK button to enter, the screen will display as below:

Change pin: Press the button to select Change pin. Press the OK button to enter the Change pin Setting menu. You can input the Old Pin, New Pin then confirm it again. Change Lock: Press the button to select Change Lock. Press the OK button to enter the Change Lock Setting menu. You can input the Password. Time Setting Press the button to select Time Setting, press the OK button to enter, the screen will display as below:

Time Zone: Press the button to select the Time Zone, press the OK button to enter the Time Zone Setting menu, press the button to select GMT-12 to GMT +13.

DVB Setup System Info Press the button to select System Info, press the OK button to enter, the screen will display as below:

Installation Press the direction buttons to select Installation. Press the OK button to enter the item, screen will display as below: There are three items for setting: Auto Scan, Manual Scan, Default Setup. Press the button to select item, press the OK button to enter, press the Setup button to return.

Auto Scan Press the button to select Auto Scan, press the OK button to enter, the screen will display as below: In the menu, press the button to select the item you want to set up, press the OK button to enter the item. Press the Setup button to return to the previous menu.

DVB Setup Select Country: Press the button to select the Select Country, press the button to enter the Select Country Setting menu, press the / button to select Germany, England, Italy, France etc. Start Scan: Press the button to select the Start Scan, press the OK button to enter. Manual Scan Press the button to select Auto Scan, press the OK button to enter, the screen will display as below:

There are four items for setting: Area, Scan Type, Start Channel, Start Scan. Press the button to select item, press the OK button to enter, press the Setup button to return.

Area: Press the button to select the Country, press the button to enter the Area Setting menu, press the / button to select: China, TWN ,Germany, England etc. Scan Type: Press the button to select the Scan Type, press the button to enter the Scan Type Setting menu, press the / button to select: Single Channel, Channel Range. Start Channel: Press the button to select the Start Channel, press the button to enter the Start Channel Setting menu, press the / button to select number. Start Scan: Press the button to select the Start Scan, press the OK button to enter.

DVB Setup Default Setup: Press the button to select Default Setup, press the OK button to enter, the screen will display as below:

In this menu, press button to select OK/Cancel item, select OK to reset to Default. Select Cancel to return to the previous menu.

Game Press the direction buttons to select Game. Press the OK button to enter the item, screen will display as below: In the menu, press the button to select the items: BoxMan, Burning Tetris, Hit Rat. Press the OK button to enter the item. Press the Setup button to return to the previous menu.

Notes on Discs Compatible Disc Formats DISC LOGO

DIAMETER

12cm DVD 8cm

PLAYBACK TIME/ PLAYABLE SIDES 133 min (SS-SL) 242 min (SS-DL) 266 min (DS-SL) 484 min (DS-DL) 41 min (SS-SL) 75 min (SS-DL) 82 min (DS-SL) 150 min (DS-DL)

12cm

74 min

8cm

20 min

MP3

12 cm

600 min

JPEG

12cm

MPEG4

12cm

Operation methods of some DVD discs are specified by the software manufacturer. Please follow the instructions of the disc.

Care of Discs Holding Discs

When loading or removing discs, try not to touch their playing surfaces as on the right figure.

Cleaning Fingerprints or stain on the disc may affect the quality of sound and picture. To clean your discs, use a soft clean cloth to wipe them. If necessary, moisten a soft cloth with diluted neutral detergent to remove heavy dirt or fingerprints. Do not wipe in a circular direction as the figure in the right middle (concentric scratches on the disc groove tend to cause noise). Gently wipe from the center of the disc to the outer edge as on the right figure.

Playback Operation PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING YOUR DVD PLAYER FOR THE FIRST TIME. WARNING: Do not play poor-quality discs to avoid damaging the lens.

Pre-operation 1. 2. 3.

Connect the unit to power supply through the provided AC adaptor. Press the “POWER ” button on the front panel turn on the DVD player. Press the “Press” button on the unit, put a disc in the disc tray with printed side facing up, then close the disc cover. (See the figure below)

4. 5.

Adjust the volume with VOLUME control on the right panel to proper level. To turn the player off, Press the “POWER ” button on the front panel again.

Using of Some General Buttons MODE button

Press the MODE button to change the level of brightness, contrast and color. Please adjust these items with the +/- button buttons. Press and hold the button for 1~2 seconds to change the aspect ratio between 16:9 and 4:3 and overturn the screen. See the below figure for details:

Playback Operation Use of Some General Buttons (continued) ZOOM button

A-B button

For DVD disc, press the ZOOM button to display the image as ZOOM 2-3-4-1/2-1/3-1/4-normal size in sequence. This function is not available for CD disc.

During normal playback, press the A-B button to select the segment that you want to play repeatedly. Press once to select the beginning point “A”, press again to select the ending point “B” and play the segment repeatedly. Press A-B button again to cancel the repeat segment. This function is not available for JPEG disc.

DVD Playback Buttons Operation Start Playing

button

STOP button

Load a disc in, the player will search the disc and play it automatically, press the direction buttons to highlight the item that you prefer and press the ENTER button (or the OK button on the front panel) to start playback.

Press the button to pause playback, and press it again to resume normal playback.

During playback, press the STOP button once to stop button to resume normal playback, then press playback from the place where it was stopped. Press it twice repeatedly to stop playback completely.

Playback Operation DVD Playback (continued)

MENU button

& buttons

INFO button

AUDIO button

Press the MENU button during playback. The root menu will appear on the screen. Press the direction buttons ( ) to select the item you wish to play, and press the ENTER/OK button to confirm. Or press the 0-9 and +10 buttons to select the item you prefer directly.

Press button to go to the previous chapter. Press the button to go to the next chapter.

Press the button to start fast forward playback. Press it repeatedly to fast forward at the speed of 2Xă&#x20AC; 4Xă&#x20AC; 8Xă&#x20AC; 20X in sequence. Press the button to start fast reverse playback. Press it repeatedly to fast reverse at the speed of 2Xă&#x20AC; 4Xă&#x20AC; 8Xă&#x20AC; 20X in sequence. Press the button to resume normal playback.

Press to display or cancel the detailed information of the disc during playback.

DVD discs can contain up to 8 audio bit streams. For example: English, French etc. To select the audio bit stream you prefer, press AUDIO button during playback. The DVD player will play the next audio bit stream every time you press the AUDIO button in succession.

Playback Operation DVD Playback (continued)

SUBT button

During DVD playback, press the SUBT button to select a subtitle language or to turn subtitle off. A DVD disc can be recorded with at most 32 subtitles. Press the SUBT button repeatedly, the mode of subtitles will recycle as follows: SUBTITLE 1/N: Subtitle 1 appears on the screen. SUBTITLE 2/N: Subtitle 2 appears on the screen. SUBTITLE */N: Subtitle * appears on the screen SUBTITLE OFF: No subtitle. N refers to the total number of subtitles that the current disc contains.

This function is available for DVD discs recorded with multi-subtitles

REP button

GOTO button

Press the REP button to repeat a Chapter, Titleďź&#x152; OFF in sequence

During playback, press the GOTO button repeatedly to enter the menu to select desired TITLE, CHAPTER or TIME. Use the direction buttons to select the item you want to set. Use the 0-9 and +10 buttons to select directly and then press the ENTER/OK button to confirm. Press the GOTO button again to exit.

Playback Operation DVD Playback (continued)

SLOW button

Press the SLOW button to start slow playback as following: 1/2、1/3、1/4、1/5、1/6、1/7. Press button on the front panel to resume normal playback.

Press the ANGLE button to access multi-angles on a disc. Multi-angle means that a scene is shot from different angle so that the audience can watch from any angle, like the drawings below:

ANGLE button

If there are multiple angles in a scene, you can use the ANGLE button to select the angle you like to view. Press the ANGLE button repeatedly to view different angle. This function is only available for the DVD disc that coded with multi-angle.

TITLE button

In general, the content of a DVD disc can be divided into several titles, and also there are several menus in a title. Press TITLE button during playback. The title menu will appear on the screen. Press the direction buttons or press the 0-9 number buttons to select the desired title or disc menu item, then press the ENTER button to confirm. Press the TITLE button during playback. The title menu will appear on the screen. Press the direction buttons to select the desired title or disc menu item, and then press the OK button to confirm.

Playback Operation CD Playback Buttons Operation

STOP button

During playback, press the STOP button once to stop playback, then press button to resume normal playback from the place where it was stopped.Press it twice repeatedly to stop playback completely.

& buttons

REP button

Press the REP button to repeat a Track, All or Off in sequence.

& buttons

Press the button to go to the previous chapter. Press the button to go to the next chapter.

GOTO button

Press the GOTO button to select desired disc starting time, track starting time or track. During CD playback, press it repeatedly to display as follows: Track Go To--:--:-- Select Track:--/N N refers to the total track number of the disc. Use 0-9 buttons on the remote control to select directly.

Playback Operation CD Playback (continued)

INFO button

AUDIO button

Press to display or cancel the detailed information of the disc during playback.

Press the AUDIO button to select desired sound effect. Press it repeatedly, the display is as follows: CHANNEL: [MONO L MONO R STEREO]

Playback Operation MP3 Playback Buttons Operation

STOP button

& buttons

During playback, press the STOP button once to stop playback, then press button to resume normal playback from the place where it was stopped. Press it twice repeatedly to stop playback completely.

& buttons

Press the button to go to the previous chapter. Press the button to go to the next chapter.

GOTO button

Press the GOTO button to select desired disc starting time, track starting time or track. During MP3 playback, press it repeatedly until it displays as follows: Track Go To--:--:-- Select Track:--/N N refers to the total track number of the disc. Use 0-9 buttons on the remote control to select directly.

Playback Operation MP3 Playback (continued)

INFO button

Press to display or cancel the detailed information of the disc during playback.

Press the REP button to repeat a file, folder in sequence.

REP button

Press it repeatedly until it displays as follows: REP: [ REP 1 REP DIR REP All OFF ]

Playback Operation

Picture CD Playback Pre-operation 1. 2.

3. 4.

Load a Picture CD in the disc tray, the player will search and play disc automatically. The screen displays the Root Folder with several subdirectories/subfolders. Use the , buttons on the remote control to select desired folder. Then you can press any of the buttons below to confirm your selection: ENTER button on the remote control or , OK button on the front panel. The screen enters the selected subfolder with several files. Use the , buttons on the remote control to select desired file. Then press the ENTER button on remote control or button on both remote control and front panel to confirm your selection. Press the button to return to last folder or directory. Or move the yellow light bar to , then press the ENTER button on the remote control or the button on front panel to confirm.

Note: Many discs have other items besides pictures. Buttons Operation

STOP button

Press the STOP button during playback to return to root folder. Press button (on the front panel or the remote control) to resume normal playback.

button

Press the button to pause playback, and press it again to resume normal playback.

& buttons

Press the PREV button to go to the previous file. Press the NEXT button to go to the next file.

Playback Operation Picture CD Playback (continued)

Press the REP button to repeat a file, folder in sequence.

REP button

INFO button

Press it repeatedly until it displays as follows: REP: [ REP 1 REP DIR REP All OFF ]

Press the INFO button for detailed information on the disc playing. Press it again to remove information from screen. This function is only available under folder mode.

Playback Operation Picture CD Playback (continued) Picture Rotate

During browsing a picture, you can press direction buttons , , , to rotate the current picture. Press the button to rotate the current picture clockwise, as following drawings:

Press the button to rotate the current picture anti-clockwise, as following drawings:

Press the button to rotate the current picture flip horizontal, as following drawings:

Press the button to rotate the current picture flip vertical, as following drawings:

Note: Some picture CD discs are restricted by their designing method, and so have no rotating, zooming etc. function.

Playback Operation MPEG4 Playback Pre-operation 1. 2. 3.

Load a MPEG4 disc in the disc tray. The screen displays the Root Folder. Use the , buttons on the remote control to select desired folder. Then you can press any of the buttons below to confirm your selection: ENTER buttons on the remote control or , OK button on the front panel.

Buttons Operation Start Playing

button

& buttons

Press the PREV button to go to the previous file. Press the NEXT button to go to the next file.

Playback Operation MPEG4 Playback Continued

STOP

During playback, press the STOP button to return to root folder. Press button (on the remote control or front panel) to resume normal playback.

Press the REP button to repeat a file, folder in sequence.

REP button

SLOW button

AUDIO button

Press it repeatedly until it displays as follows: REP: [ REP 1 REP DIR REP All OFF ]

Press the SLOW button to start slow playback as following: 1/2、1/3、1/4、1/5、1/6、1/7. Press button to resume normal playback.

Press the AUDIO button to select desired sound effect.

Playback Operation MPEG4 Playback Continued

GOTO button

Press the GOTO button to select desired disc starting track or track starting time. During MPEG4 playback, press it repeatedly until it displays as follows: Select:--/-Go To --:--:--

INFO button

Press to display or cancel the detailed information of the disc during playback.

SUBT button

During playback, press the SUBT button to select a subtitle language or to turn subtitle off. This function is available for the disc recorded with multi-subtitles

Note: some MPEG4 discs may not support SUBT, ANGLE or AUDIO function.

System Setup

You can change the default settings of this unit to customize its performance to your own preference. Read this section to learn how to set up the system. Note: the system should better be set up in the state that no disc is in the DVD drive or the unit is on the stop mode. Follow the steps below to set up your system: 1. Press the SETUP button on the remote control or the front panel. 2. The setup menu will appear on the screen. It includes General setup page, Audio setup page, Digital setup page, System setup page. You can exit the setup menu by pressing the SETUP button again at any time during setting. 3. Press the or (direction buttons) on the remote control or on the front panel to select a sub-menu that you want to set up. 4. Press the or button on the remote control or on the front panel to select the item that you want to set up in the sub-menu.

General Setup Page

The items included in this sub-menu are shown on the left.

1.TV TYPE This item is used to set TV display mode. Press the or button to highlight this item. Press the ENTER or button to enter the item. It includes 4:3 PS, 4:3 LB, and 16:9. Press the or button to choose the proper one. Press the ENTER button to confirm your selection. Press the direction button to exit this item.

System Setup General Setup Page 2.OSD Language This item is used to set the OSD (on-screen display) language. Press the or button to highlight this item. Press the ENTER or to enter the setup of this item. It includes English, French etc. Press the or button to choose the proper one. Press the ENTER button to confirm your selection. Press the direction button to exit this item.

3.Angle Mark This item is used to turn the Angle Mark on or off. Press the or button to highlight this item. Press the ENTER or to enter the item. Press the or button to choose angle mark on or off. Press the ENTER button to confirm your selection. Press the direction to exit this item.

4. Close Caption This item is used to turn the captions on or off during playing. Press the or button to highlight this item. Press the ENTER or to enter the setup of this item. The default setting of this item is on. Press the or button to choose on or off. Press the ENTER button to confirm your selection. Press the direction button to exit this item 5.Screen Saver This item is used to turn the screen saver on or off. Press the or button to highlight this item. Press the ENTER or to enter the setup of this item. The default setting of this item is on. Press the or button to choose on or off. Press the ENTER button to confirm your selection. Press the direction button to exit this item.

System Setup General Setup Page 6. Memory This item is used to set last memory state. Note: The last memory refers to resume playback from the point that you stopped last time. Press the or button to highlight this item. Press the ENTER or to enter the item. The default setting of this item is off. Press the or button to choose on or off. Press the ENTER button to confirm your selection. Press the direction button to exit this item.

Audio Setup Page The item included in this sub-menu is shown on the left.

1.Downmix This item is used to set downmix mode. Press the or button to highlight this item. Press the ENTER or to enter the item. It includes Lt/Rt and stereo, stereo by default. Note: The function of Lt/Rt is to output mixed audio in the format provided by Dolby. The function of stereo is to output stereo signal. Press the or button to choose the proper one. Press the ENTER button to confirm your selection. Press the direction button to exit this item.

2. Audio Out This item is used to set downmix mode. Press the or button to highlight this item. Press the ENTER or to enter the item. It includes SPDIF/OFF,SPDIF/RAW,SPDIF/PCM.

System Setup Digital Setup Page 1. Dual Mono This item is used to set the channel output mode. Press the or button to highlight this item. Press the ENTER or to enter the item. It includes stereo, L-Mono, R-Mono and Mix-Mono, Stereo by default. Press the or button to choose the proper one. Press the ENTER button to confirm your selection. Press the direction button to exit this item. 2.Dynamic Range This item is used to adjust linear dynamic compression rate to get different signal compression Effects. Press the or button to highlight this item. Press the ENTER or to enter the setup of this item. Then the item will show as the left. Press the or to choose the proper level. Press the ENTER button to confirm your selection. Press the direction button to exit this item.

System Setup Page The items included in this sub-menu are shown on the left. Note: This sub-title can only appear in the state that no disc is in the DVD drive.

1. TV SYSTEM This item is used to TV SYSTEM. Press or button to highlight this item. Press the ENTER or button to enter the item. The available languages are NTSC, PAL,. Press the or button to choose the preferred item. Press the ENTER button to confirm your selection. Press the button to exit this item.

System Setup System Setup Page

2. Audio Lang This item is used to set the audio output language. Press or button to highlight this item. Press the ENTER or button to enter the item. The available languages are English, French, Spanish etc. Press the or button to choose the preferred Language. Press the ENTER button to confirm your selection. Press the button to exit this item.

3. Subtitle Lang This item is used to set the subtitle language. Press the or button to highlight this item. Press the ENTER or button to enter the item. The available languages are English, French, The available languages are English, French, Spanish etc. Press the or button to choose the preferred Language. Press the ENTER button to confirm your selection. Press the direction button to exit this item.

4. Menu Lang This item is used to set the language of disc menu. Press the or button to highlight this item. Press the ENTER or button to enter the item. The available languages are English, French, Spanish etc. Press the or button to choose the preferred Language. Press the ENTER button to confirm your selection. Press the direction button to exit this item.

System Setup System Setup Page 5. DIVX (R) VOD This item is used to download the MPEG4 format video through using the registration code.Please visit the website: WWW.DIVX.COM/VOD to get the corresponding information.

6. Password Rating is protected by password. This item is used to change the password of the parental control. The default password is 0000. Press the or button to highlight this item. Press the ENTER or button to enter the item. Choose a password most suitable for you. Press the ENTER button to confirm your enter. Press the button to exit this item. 7. Rating DVD discs are rated according to their contents, and their settings vary from disc to disc. The function of this item is to set Rating. You can lock out certain scenes of the discs, or lock out the whole disc depending on the contents of the disc after setting this item. The default level is Adult. Press or button to highlight this item. Press ENTER or to enter the setup of this item. Press to exit from this item. 8. Default This item is used to reset the unit. Press the or button to highlight this item. Press the ENTER or button to enter this item. Press the ENTER button to reset. Then all the settings of your unit will return to the Original status.

Definitions .

Letterbox screen

This refers to a screen on which the playback picture of wide-screen DVDs appears with black bands running along the top and bottom.

Pan & Scan screen

This refers to a screen on which the playback picture of wide-screen DVDs is cut off at the left and right sides.

Title, Chapter (DVD)

DVDs are divided into some large sections (titles) or some small sections (chapters). Each section is numbered: these numbers are called "Title number" or "Chapter number". Title 1 Title 2 Chapter1 Chapter 1 Chapter2â&#x20AC;Śâ&#x20AC;Ś

Track (CD)

CDs are divided into some sections (tracks). Each section is numbered; these numbers are called "Track number". Track 1 Track 2 Track 3

JPEG

JPEG is a common picture format that has small file size and low quality loss rate of picture. Hundreds of pictures can be stored in a disc in this format. In order to utilize real digital album, use film to make a "PICTURE CD" in JPEG format. The figure on the right displays the root folder, folders and files.

MPEG4

MPEG4 is the name of a revolutionary new video code which is based on the new MPEG-4 compression standard for video. You will be able to play MPEG4 movies using this DVD player.

Troubleshooting Take steps described in the tables below to solve simple problems before contacting after-sales service. If you suspect something wrong, immediately turn the power off. Disconnect the power connector and check that there is neither smoke nor heat from the unit before asking for repairs. Never try to repair the unit by yourself because it is dangerous to do so. PROBLEM

The player cannot play.

POSSIBLE CAUSE The disc cover may not be closed.

Close the disc cover.

There may not be any discs in the DVD drive.

Put a disc in to the DVD drive.

The disc may not be put in with the right way.

Put the disc in with the label side up.

The disc may be dirty or warped.

Clean or change the disc.

The player's region code may not as the same as the region code of DVD disc.

Make sure the player's region code is the same as the region code of DVD disc. Remove the disc and keep the player being powered off for at least two hours.

There may be water on the lens.

There is no sound.

POSSIBLE SOLUTION

The system connection may be not correct.

Connect correctly.

The speaker may not be turned on.

Turn on the speaker.

The sound setup of the DVD disc may be not correct.

Setup the sound of the DVD correctly.

The disc may be dirty or warped.

Clean or change the disc.

the

system

Troubleshooting

PROBLEM

There is no picture.

Poor AV performance.

The remote control does not work

POSSIBLE CAUSE

POSSIBLE SOLUTION

The LCD may be off or not be in correct video mode.

Turn on the LCD and choose the correct video mode.

The system connection may be incorrect.

Connect correctly.

The unit may be not in AV out mode.

Switch AV tab on the bottom of the unit to out.

The disc may be dirty or warped.

Clean or change the disc.

There may be some obstructions between the remote control and the player.

Remove the obstruction between the remote control and the player.

The remote control may not be pointed at the player.

Point the remote control at the player directly.

The batteries of remote control may not be inserted correctly.

Make sure the polarity of each battery is correct.

The batteries of remote control may be out of power or weak.

Replace the batteries.

the

system

Other possibilities: Static or other external interference may cause the player function abnormally. In order to recover normal status, please unplug the power-supply cord and then plug it into the outlet again to reset the player. If the problems still exist, please cut off the power supply and consult your service center or the qualified technician.

Specifications

TFT screen size

8.5 inches

Laser Wavelength

780/650 nm

Video System

PAL

Frequency Response

20Hz～20kHz

Audio Signal-to-noise Rate

≥85dB

Audio distortion+noise

≤－70dB (1kHz)

Channel Separation

≥70dB (1kHz)

Dynamic Range Analog Audio Out

Audio Out

Digital Audio Out

Video Out

Power

AC 100-240V ～

Power Consumption

±2.5dB

≥80dB (1kHz) 0.2 Out Level: 1.5V± 1.0 , Load: 10KΩ Output Level: 0.5VP-P, Load: 75Ω Out Level: 1VP-P±0.1, Load: 75Ω Unbalanced Negative 50/60Hz

< 25W

Dimensions

195mmX149mmX38.5mm (L*W*D)

Weight

About 0.82 kg

DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. © 1992 -1997 Dolby Laboratories, Inc. All rights reserved.