“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
INDEX
SL.NO
CONTENTS
PAGE NO
1.
EXECUTIVE SUMMARY
2.
STATEMENT OF PROBLEM
3
3.
SCOPE & OBJECTIVE
4
4.
INDUSTRY PROFILE
5-6
5.
COMPANY PROFILE
7-13
6.
PROFILE OF DEPARTMENT
14-30
7.
RESEARCH METHDOLOGY
31-33
8.
ABOUT ISO
34-37
9.
IMPACT OF ISO AT SIS
38-47
10.
FISHBONE TECHNIQUE
48-54
11.
CALCULATIONS&ANALYSIS
55-59
12
FINDINGS&LIMITATIONS
60-62
13.
CONCLUSION
14.
BIBILOGRAPHY & ANNEXURE.
Babasabpatilfreepptmba.com
1-2
63 64-65
Page 1
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
CHAPTER –I
EXECUTIVE SUMMARY
BELGAUM CITY IS WELL KNOWN FOR THE FOUNDRY INDUSTRIES, WHERE HUGE RESOURCES ARE AVAILABLE IN PLENTY PERTAINING TO IT .SHANTI IRON AND STEEL is Known for the excellence of its quality castings manufacturing company. SIS got its ISO certification in the year 2001. I have undertaken a project entitled “IMPACT OF ISO PROCEDURES ON QUALITY CONTROL” at SIS. An In-depth study was made to understand the nature of the organization as a whole and exposed to get the practical knowledge. The main objective of the study is to know the effective implementation of ISO 9001:2000 procedures and how it has helped to improvise the quality as well as reduced the rejection rate. Methodology of the study: 1. Determined the statement of the problem 2. Objectives of the study: •
TO STUDY THE REASONS WHY SIS OPTED FOR ISO.
•
TO STUDY HOW ISO CAN HELP TO IMPROVEVISE THE QUALITY.
•
TO ANALYSE THE REASONS FOR REJECTIONS IN PRE-ISO PERIOD.
•
TO STUDY HOW ISO IMPLEMENTATION HAS HELPED TO REDUCE REJECTIONS AND IMPROVE QUALITY CONTROL AT SIS.
Research Design used in this study is explorative in Nature to collect the information . Tools used for Data collection is a) Primary source: Interaction with Accounts manager at SIS b) Secondary source : Company Brochure, Through Internet, Magazines and Guidelines provided to company by ISO -true copy. Babasabpatilfreepptmba.com
Page 2
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Through “FISH BONE Technique” the reasons for rejections analyzed. Some of the important findings are : •
Reduction in expenses by 19% .
•
Effective ISO 9001:2000 guide lines helped in reducing the rejection of materials .
•
Quality control ensures the improvising the quality & accuracy in production. It was an opportunity to learn the practical aspects of industries. I choose this
topic concerned to company requirement.
Babasabpatilfreepptmba.com
Page 3
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
CHAPTER –II
1.
IDENTIFICATION OF PROBLEM
2.
OBJECTIVES OF THE STUDY
3.
SCOPE OF THE STUDY
STATEMENT OF THE PROBLEM The management world has seen many new ideas, concepts, through innovation etc., which have emerged almost each day with the object of achieving result for the organizations. One such concepts in TQM, which is almost done by, or other way using different techniques, is QUALITY CONTROL, which was lead to many questions such as what kind of METHODS ADOPTED IN IMPROVING THE QUALITY, It is desirable to use different technique in REDUCING THE REJECTIONS, The study is Babasabpatilfreepptmba.com
Page 4
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
being undertaken to know the relative importance and effectiveness of an ISO PROCEDURES ON QUALITY CONTROL AT SHANTI IRON AND STEELS UDYAMBAG , BELGAUM . The topic of the research report is “ A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL”.
Scope and objectives of the study SCOPE OF STUDY:This Project Report highlights the importance of ISO certification and its Guidelines as well as its impact on quality control, the procedures involved in production method , I,epre & post implementation of ISO 9001:2000 certification.
Babasabpatilfreepptmba.com
Page 5
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
The organization is engaged in manufacturing the raw castings and machine castings products like – oil sump, gear casing, side valves ….etc agricultural and a engineering equipments.
Objectives of the study: •
TO STUDY THE REASONS WHY SIS OPTED FOR ISO.
•
TO STUDY HOW ISO CAN HELP TO IMPROVEVISE THE QUALITY.
•
TO ANALYSE THE REASONS FOR REJECTIONS IN PRE-ISO PERIOD.
•
TO STUDY HOW ISO IMPLEMENTATION HAS HELPED TO REDUCE REJECTIONS AND IMPROVE QUALITY CONTROL AT SIS.
Babasabpatilfreepptmba.com
Page 6
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
CHAPTER –III
INTRODUCTION TO ORGANIZATION
INDUSTRY PROFILE
Gem of our State Belgaum District, the second largest in terms of geographical area is growing to become as a vibrant economy. Its strategical location, connectivity, salubrious climate, huge natural resources, vast pool of human talent, cheap and skilled labor, educational facilities, recreation facilities lead the district towards a phenomenal growth in social, economical, industrial and trade sectors. Babasabpatilfreepptmba.com
Page 7
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Belgaum is the best amongst Tier Two cities in Karnataka, which the Government is taking active steps to promote industrially. ABOUT FOUNDRY INDUSTRY VISION: To make Belgaum Foundry Industry World Class, Internationally competitive and Environment Friendly. MISSION: To provide World Class Infrastructure Facilities to the Foundry Units in and around Belgaum to make them competitive and achieve excellence of performance. From the early 1970’s, Belgaum began developing as an important centre for the manufacture of heavy machine tools. Foundries and units producing auto components are to tjis day daunting the international markets. Autonagar houses 1200 auto related industrial units making body building autocomponents, crankshafts and machine tools that act as ancillary units to large scale enterprises. The Government of India recently approved a Foundry Cluster Project costing Rs.24.7 Crores to improve infrastructure coupled with research and development. Booming automobile industry attracts a great leap in foundry sector of Belgaum. Foundry forms one of the major industrial sectors of Belgaum. It is also one of the major economies of Belgaum. There are 142 foundries at present in Belgaum, out of which 76% is small scale, 21% are medium scale & 2% are large scale foundries. There are mainly two types of foundries that is Ferrous & Non-Ferrous. The Belgaum foundries produce different types of casting ranging from 500gm to 1.8Tons. Quality concern has become one of the major aspects of casting. The major raw material required for foundries are sand (washed & unwashed), resin & alloys. The major loss that is incurred by the foundries is the wastage of sand as about 10-10,000Tons of sand is wasted while transporting. The growth rate of these foundries is increasing drastically i.e. in 2003-2005 the growth rate was 23% & in 2005-2006 the growth rate will be 34%. The Babasabpatilfreepptmba.com
Page 8
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
major threat cause to the environment due to these foundries is the fumes that is released and the waste sand that is dumped in open areas. To avoid this certain measures are been taken such as purifying of acidic fumes & providing a specific dumping area. The Belgaum Foundry Cluster has planed to undertake a project “Sand Reclayning Machine” in month of Dec-2006 which could be one of the major projects. Some of the major foundries of Belgaum are Ashoka Iron works (I, II, III), A.K.P Foundries, K.T.N Metals, J.P Foundries, Allucast, Allied Foundries etc. Among these Ashoka Iron Works are major producers of casting which produces 3000Tons of castings per month. INFORMATION PERTAINING TO THE YEAR 2005-2006 Sl.No. 1 2 3
Particulars Turnover Exports Employed persons
Babasabpatilfreepptmba.com
Year 2005 375crore 45% 40,000
Year 2006 500crore 85% 50,000
Page 9
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
SHANTI IRON AND STEELS
Company profile Name of the company: Shanti Iron and Steels. Location : #690, @ Udyambag, industrial estate , Belgaum- 590008. Web site : www.shantiiron.net. YEAR OF ESTABLISHMENT : 1 JUNE 1974. Business: Manufacturers of ‘Ready to Assemble’ graded Grey Iron components for OEM’S mainly in Disel engine , tractors and machine tool industry. Shanti Iron & Steel established in 1st July 1974 . It is an ISO 9001:2000 company and are pioneers in the manufacturing of 'Ready to Assemble’ graded Grey Iron Castings. VISION: The company has the vision for next 10 years to pioneer in supplying casting of highest at optimum price which are subassemblies / for OEM’S in automobile, engineering and industrial
parts by it self
applications.
It wants to be the “Best single source solution provider for all its customer casting requirements”. Babasabpatilfreepptmba.com
Page 10
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
MISSION:
SIS set out to the most perfect partner in manufacturing and supply of CI
raw & machine casting used in automobiles and agricultural equipments like tractor & water lighting diesel engine etc.
Babasabpatilfreepptmba.com
Page 11
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
QUALITY POLICY Shanti Iron & Steel wants to
strive continually to improve the effectiveness of
the Quality management system through involvement & motivation of the employees so as to meet customer requirements, to satisfy internal customer and enhance external customer satisfaction. STRATEGIC –OBJECTIVES •
To REDUCE WASTAGE IN ALL INHOUSE ACTIVITY
•
To REDUCTION IN VARIATION
•
To REDUCE CUSTOMER END REJECTION
•
To provide the quality products.
•
To achieve cost effectiveness in the foundry and machine shop and in other establishment totally in manufacturing fields.
•
To strive for employees empowerment team work & motivation shall contribute to the growth of our organization.
Babasabpatilfreepptmba.com
Page 12
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
BRIEF VIEW ABOUT AN ORGANISATION: In 1974 – company was established with production of grey iron only. 1990 – Expansion of foundary-unit-II in same premises. 2000 – Expansion into higher value addition First CNC machine installed. 2001 – Received ISO 9002:1994 certificate from TUV Rheinland. 2001 – Mechanization of foundry with machine moulding, sand plant and mould conveying system. 2002 – Second VMC machine installed. 2003 – Fully automatic cold Box, core shooter installed. 2003 – ISO certification upgraded from ISO 9002:1994 to ISO 9001:2000. 2005 - State of art new HMC makino a61 installed along with the CNC CMM. 2006 – second HMC a51 makino machine installed. 2007 : foundry capacity expansion phase-II. 2007 – Third HMC makino a61 machine installed. Form of ownership: Partnership organization. Initial Investment : as on 31-3-2009 = Rs 6crores. Annual turn over: 25 crores. Industrial area : 3.5 acres . Located in udyambag area in belgaum city because •
Easy availability of raw materials.
•
Transportation & labour facility.
•
Good infracture facility.
Branches : No Total Workers in the organisation: 380 - 400 380 REGULAR and 20 ON DAILY WAGES
Babasabpatilfreepptmba.com
Page 13
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Departments : 7 departments viz, •
Sales department
•
Purchase department
•
Accounts department
•
Dispatches department
•
Stores and spares department
•
Human Resource department
•
Quality department.
Licensing agreements : licensed under state and central government rules. I.
Central govt for commercial taxes under central exercise and customs.
II.
Industry permission from DIC office.
III.
Labour pollution control board.
Memorandum of Association: •
Documents maintained in the different departments are as follows:
•
Factory Act – workers wages and salaries register are as per labour Act.
•
ESI/PF register for sharing both the partners and workers.
•
Dispatches and billing statements.
Articles of association: Company meetings are conducted monthly with the workers, customers and other concerned departments. Patents and copy rights : no patents. Branded goods are not manufactured, Issued quality assurance from ISO norms.
Babasabpatilfreepptmba.com
Page 14
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
MANAGEMENT OF THE ORGANISATION As it is a partnership firm , partners are having the different responsibilities namely,
Sri . Kantilal .V. Porwal - managing partner looking over all the affairs of the organization.
Sri. Shantilal .V.Porwal – managing production unit.
Sri . Santosh.K.Porwal – marketing affairs.
And other partners are working in HUF
Capacity. Area of operation: In India and in Abroad.
Babasabpatilfreepptmba.com
Page 15
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
ORGANIZATION CHART
MANAGING PARTNER
PRODUCTION
ACCOUNTS
STORES
STORES SUPERVISORS
STORES ASSISTANT
MANAGERS ACCOUNTS
CHIEF ACCOUNTAT
ACCOUNTS ASSISTANT
MAN AGER PRODUCTION
ASSISTANT PRODUCTION ENGINEER
QUALITY ASSURANCE
Q.A. MANAGER
CHIEF CHEMISTT
MARKETING AND PLANNING
MANAGER MARKETING & PLANNING
ASSISTANT MANAGER
CHIEF INSPECTOR
WORKMEN
Babasabpatilfreepptmba.com
TECHNICIAN
HUMAN RESOURCE
INSPECTOR
Page 16
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
COMPANY ACTIVITY FLOW/ PROCESS FLOW
Measurement of performance monitoring
Corrective & preventive Action
New product Development
Corrective & preventive Actions
Corrective & preventive Actions
Sample submission & Approval
Correct Review
Production pp planning
Material planning
purchasing
Receiving Inspection
Sub contractor
Final Inspection
Production-2 Machining
Production -1 Foundry
Stores
Packing & Dispatching.
Training
Calibration
Babasabpatilfreepptmba.com
Control of NC products
Page 17
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Babasabpatilfreepptmba.com
Page 18
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
WORK PROFILE OF EACH DEPARTMENT Production Department 1. Plant location : Udyambagh , Industrial estate Near khanapur road , Belgaum-590008. 2 .Plant layout : 2 Qupolas machines having the production capacity of 3.00tonnes FURNASE = 1tonne per hour 3 HMC machines (heavy duty milling machines) imported from japan. In 1974 when the company established only 3 simple operating machines at present totally
there are more than 200 machines are installed. A growth oriented
organization. 3. Total workers in the production process : 300 – 325 workers. 4. working hours : total 8hours i,e 8.00am to 5.00pm. 5. power required : 1640KB high tension line purchased from HSCOM. 6. Raw materials required : CI (cast iron)scrap, ferromanganese, pig iron, coke sand, fire wood, …………………………etc. 7. Manufacturing products: oil sump, lub oil sump, side wall, gear ceasing, drum liner, oil engine parts. Manufacturing process: The Industry has a daily production on an average of 1500 units. Process: • Iron & steel & other raw materials. • Sand pouring: the meited is poured in the pattern to give a desired
shape.
• Lab testing: after the desired shape is given the product goes for lab testing for testing the chemical composition. • Dye casting: here the product is processed in a machine. • Machining : this step gives the product accurate shape. Babasabpatilfreepptmba.com
Page 19
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
• Lab testing: here the product is tested for the qualities like strength, dimensions and hardness. • Packing : the final product is packed in such a way that it does not get damaged during shipment. The production takes place by using 2 methods: 1. Conventional method – manual 2. Modern method - CNC machine.The production centre has monthly performance measurement system. 3. The measurement is done to actual s with the standards like defects, rejections, customer complaints, sales……..etc. Divisions: 1.
Mechanical division: concerned with the breakdown of machinery.
Electrical division: concerned with loose electrical problems. PRODUCTION PROCESS[planning/methods] 1. Incoming raw material 2. Moulding 3. Core making 4. Melting 5. Fettling 6. Stress Relieving 7. Painting 8. Machining 9.Pressure Testing 10. Analysis, Testing & Inspection 11.Packing.
Babasabpatilfreepptmba.com
Page 20
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
INCOMING OF RAW MATERIAL:
In house raw material inspection & testing facility
In-house
small
pattern
manufacturing,
modification,
repair
and storage facility (for 1000 patterns)
New pattern manufactured by approved pattern specialist.
Pattern made of Aluminum, wooden and resin.
In-house match plating facility.
MOULDING
Mechanized
sand
plant,
20TPH
capacity each
Hand
Moulding
for
bigger
and
heavier castings ( > 100Kg)
Green Sand, CO2 moulding process
Mechanized mould conveying system.
Babasabpatilfreepptmba.com
Page 21
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
CORE MAKING
Cold Box core shooter, Compax make,50 litre capacity.
Cold Box ,Oil Sand, No bake,CO2 & shell core (sub-contracted) core making processes . Core Weight max up to 100Kg.
MELTING
Inductotherm 1250 kw Induction furnace, 500 Kg/hr with 2 crucible Cupola: 2.5 ton/Hr, 2 nos
FETLING
Knock out machine, capacity 500Kg
Shot blasting machine- 500kg/hr-2 nos.
Chipping, grinding and gauge inspection, wherever required.
STRESS RELIVING
Inside working space
1200x1050x900 mm, with 2 ton capacity
Programmable control unit to control the cycle.
PAINTING
Spray painting booth and dip tank facility
Primer paint as per customer specification
MACHINING
Makino a61 HMC Machine with X Y Z 730 x 630 x 630mm with HSK 63 Spindle & 60 tools ATC - 2no's Makino a51 HMC Machine with HSK 63 Spindle and 40 tools ATC XYZ 560 x 560x 600mm and Hitachi Seiki HC500 HMC machine with 650 x 650x 550mm with BT50 spindle & 30 tools ATC.
Cincinnati make VMC with Acramatic 2100 controller. Axes traverse, 750x510x510 mm with ATC of 21 tools, Batliboi make VMC with Fanuc control, axes travers 510 x 510 x 510mm with ATC of 21 tool - 2 Nos.
Babasabpatilfreepptmba.com
Page 22
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Mario Carnaghi(Italy) Make, Double column type planning machine with grinding attachment with stroke of 3000 mm and traverse of 1000 mm. Max height of job 800 mm.
Gullemin Sergot Pegarde Make, Single Column type Planning Machine with milling attachment with stroke of 2000 mm and traverse of 1000mm.Max Height of the job 600 mm.
WMW ( German) Make, boring machine with traverse of 1000x1000x600mm.
Horizontal
&Vertical
Milling
machine(
5Nos)
Radial
drilling
machine(8Nos)Shapping machine, Lathe Machine (8Nos). PRESSURE TESTING
Testing bench size 700 x 400 mm - 2 Nos
Testing Pressure up to 30 bar.
ANALYSIS TESTING INSPECTION
'SPECTRA' make Spectrometer Model Spectromaxx LMF 04
Laboratory with Strohelin apparatus, Digital muffle furnace,Distilled Water Plant,Polishing
disc,ASTM
tester,Compression
Strenght
sand
siever,Permeability
M/c,Sand
washer
Meter,moisture
Standard
sand
Rammer,Physical Balance.
Sand analysis.
Mould hardness and core scratch hardness tester.
Ferro lab- instant CE,carbon and silicon analyzer.
Digital temperature meter. Dye Penetrant testing.
BHN Machine and Poldi Hardness tester
Metallurgical Microscope. Radiography and ultrasonic testing outsourced.
Measuring instruments
Granite surface plates.
Digital height station,TRIMOS VA 600-measuring up to 600mm and accuracy 1 micron
CNC - Coordinate Measuring Machine Model SPectra 685, Accurate Make with XYZ stroke 600 x 800 x 500mm respectively. Babasabpatilfreepptmba.com
Page 23
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
PACKING •
Casting cleaned thoroughly with kerosene and then as per requirement cleaning on Cleantech's High Pressure Machine with working envelope of Dia 1000mm x 400mm.
•
Machined surfaces applied with rust preventive oil.
•
Critical & Fragile area covered with plastic rings, wrapped in VCI paper/Plastic sheet& sealed.
Finally packed in corrugated and wooden boxes as per customer requirement EDP DEPARTMENT
ERP Software connecting all departments.
Advance shipment notice on customer's website.
AutoCAD Software to view and exchange CAD files.
QUALITY SYSTEM DEPT The company works on the principal of continues improvement. Each department are given objective goals in a respective work areas with a view to
eliminate or
minimize it, so as to meet the overall companies quality policy and resulting into improvement of quality management system. Maintenance: Trying to minimize
the
cost of production by proper scheduling. Time
management in the organization as per the china economy policy. To retain the employees minimum wage is maintained. Using computer soft ware - “SAP” encompass by Godrej software provider, it helps to maintain the documents in the organization. INVENTORY MANAGEMENT DEPARTMENT: [stores] Raw materials are purchased as and when required, depending on the order chart. No storing and wastage of materials. ISO norms for quality assurance =100% is maintained. Babasabpatilfreepptmba.com
Page 24
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
TQM = 97% production is accurate and 3% is loss. Total zero defect programme is maintained . Spare parts are produced as per the customer order.
Babasabpatilfreepptmba.com
Page 25
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Note : Due to recession period the organization has badly affected with the increase in market prices. • Buyers will not schedule properly. • Iron and steel price are hiked suddenly. • In the recession period also the employees are retained by giving the minimum wage . LABORATORY: It is used for the central process and testing the chemicals used in the production process. It also tests the chemicals before entering in the stores. If any defects are found in the materials receives, they are sent back to the suppliers. The finished products are also tested for their chemical composition. MARKETING DEPARTMENT 1. Area of marketing: In India and in Abroad. 2. Competitors : no 3. Raw materials: pig iron, coke, ferromanganese, cast iron……etc 4. Product profile : Cast iron scrap, (CI graded) , Raw castings, machine castings.
Babasabpatilfreepptmba.com
Page 26
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
About customers: 1. Addison and company LTD Chennai 2. kirloskar oil engines pune 3. Electronic a machines LTD pune 4. Same dude spare – ranipeth Chennai 5. warthsila - Finland 6. worthsila – Italy. 7. Atlas copco ltd
Babasabpatilfreepptmba.com
Page 27
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Annual sales: 25 corers. Distribution channels : direct marketing i.e, from manufacturer to customers. Marketing service: Has the expertise of supplying higher value added casting components from a single point. In house facilities include foundry stress- relieving, painting, machining, assembling and inspection and testing. FORM PATTERN: Ready To Assemble or sub Assembled components. Target market : for the firm is project companies & agriculture sector. Pricing strategy: considerations while fixing the price for the goodsa.Observing the price index in the market. b.Taxes on goods viz- central exercise, CE sales tax, VAT’s ….etc c. Transportation charges. d.Price fixation for raw materials & products is vast one concerning in all the organizations especially in growth oriented industries . e. Iron and steel prices are fluctuating. f. Export and import charges has to be considered. Here in this organization, Quotation system is practiced for materials and given to suppliers. As per the customer requirement production
is processed. Inter national
transactions is monitored by “JP-MORGAN” And “UNITED WESTERN MONEY” Organizations. Conversion of dollars, Great Britain pounds, yens, Dinars Into Indian rupees and comparatively other currencies. Foreign customers order to use the foreign imported materials for the production of their spare parts as they required.
Babasabpatilfreepptmba.com
Page 28
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
For example: 1. ATLAS COPCO co’m LTD - pune A foreign collaborated in India is one of the main customer to shanti iron . Price mechanism : Imported the devices to manufacturing their parts. Prices are negotiable Agreed upon both seller & buyers conditions. Considering the raw material charges, employes salaries & wages and other expenses and over heads ….etc are considered in price fixation. Totally it is a vast mechanism. 2. BOSCH India ltd world recognized export oriented co’m. They are the manufacturers of different types of plugs required to all types of machineries, the event is collaborated one having their Head office in USA from their they are asking for the materials has to be sold and purchased. They have to work under the norms of India and USA. About Advertisement: Through the electronic media- internet and broad band Offerings are displayed through net, if the buyers & suppliers both requirements are agreed. then the transaction is carried out. Foreign customers are easily catched through websites. Transaction procedure: In this organization, Determine of product requirement: product requirement are determined through personnel
visits & by telephone with customer
authorized
representative by marketing head.
Babasabpatilfreepptmba.com
Page 29
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS�
Review of requirements: Review & finalization of product requirements are carriedout by managing partner & marketing
Head after resolving the differences
customer. Ability to meet defined requirements is reviewed with concerned departments. A monthly marketing plan is prepared & issued to production by marketing, customer before execution of orders confirms the requirements communicated verbally by customer in writing. Marketing department maintains records of results of review. Customer communication : constant communication with customers
are
maintained by marketing Head through E-mail, telephone & mail services. The communication will cover product information, feedback/ companies. Delivery monitoring:
schedules, amendments, customer
monthly dispatch status is made in
coordination with production and stores department.
Babasabpatilfreepptmba.com
Page 30
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
ABOUT FINANCE DEPARTMENT: So far SHANTI IRON & STEELS is a partnership concern partners are the stake holders regarding the capital nukes of the firm.Initial investment as on 31-3-2009 = Rs. 6 crores. Main Functions are: Day to day financial dealings. Receipts and payments for sales and purchases. Availing of working capital and term loans Preparation of profit & loss account & balance sheet. Payment of tax. Sources of SIS: Canara Bank, HDFC Bank Tilakwadi Branch Belgaum and partners investment. Bank finances to the extent of Rs. 1.5crs , open cash credit = Rs.70 lakhs and Bill of exchange Rs 80lakhs. Open cash credit – net worth will be estimated on fixed assets. General reserves of the industries helps in the time of contingencies. RBI & federal banks asks reserves for healthy growth of industries as well as economy. Types of Accounts maintained Sales department maintains the following records: Selling register VAT register
Babasabpatilfreepptmba.com
Page 31
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Receiving register Sales invoice Purchase register Purchase invoices Credit vouchers Cash book Stock book Stores and spares register Trial balance is the foundation of all accounts. Monthly trial balance is prepared. Trading and profit& loss account Balance sheet ]Quarterly auditing of accounts ]Tax returns ………………………………..etc Above are the responsible of Accounts manager as well as professional accountant in the organization .
Babasabpatilfreepptmba.com
Page 32
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Babasabpatilfreepptmba.com
Page 33
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
MANAGING PARTNER
ACCOUNTS OFFICER
PURCHASE
SALES
HUMAN RESOURCE
1.Managing partner looks after whole financial affairs of the firm.Accounts officer takes care of respective transactions to be maintained in the books of accounts. 2.Purchase: the credit period for the purchase of raw material is determined. 3.Sales: the credit period and discounts to be allowed to the customers is decided and also the entries of domestic and international sales transactions are maintained. 4.HR : wage distribution.
Babasabpatilfreepptmba.com
Page 34
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
HUMAN RESOURCE ACTIVITIES IN SHANTI IRON AND STEELS RECRUITMENTS: New recruits as & when vacancies arise – skilled, semi-skilled and unskilled. SELECTION: Candidates Resume. An assessment form is given by the company. Salaries are negotiable. Preference is given for experienced candidate. Partners of the organization will finally interview the candidate And the best one is recruited. TRAINING: On job and external training is provided for employees. Safety , Motivation, House keeping , Waste Elimination ………..etc On Job training: Assessment, skill-matrix, Retraining.
SALARY PREPARATION: Issue of input list to UNIT-1, UNIT-2 and Fettling. Muster updation fortnightly before 2 th and 17 th of every month. And for monthly before 4 th of every month. Feeding for salary advance, refreshments, paid leaves, paid holidays, incentives , Bonus ….etc SALARY GENERATION. Babasabpatilfreepptmba.com
Page 35
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Babasabpatilfreepptmba.com
Page 36
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
SUMMARY REPORT TO BE VERIFY Wages distribution on 4 th and 19 th. Screen of print slips has to be check up properly. BP-DA, incentive, GP-PF, ESI, PTAX, TOT-ALLOW, TOT-DEDN, NET. Final net pay list with Bank A/c NOs, Canara Bank Deductions, UTI transfer cash payable. Cash withdrawl from UTI Bank . 7 th salary distribution Summary copy to Accounts – 8 th. Abseentism – Notices, Termination- resigned, settlements etc. STATUTORY REPORT ESIC Monthly challans Monthly return Quarterly returns Half yearly returns Yearly returns. Deduction of labour welfare fund of Rs.3/-
during December plus Rs.6/-
Employers share total Rs.9/- and cheque of total amount has to submit Commissioner, B’’LORE. The following important records are maintained:
FORM NO 11 – ADULT REGISTER
Babasabpatilfreepptmba.com
Page 37
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
FORM NO 14 LEAVE WITH WAGES REGISTER
EMPLOYEES GRIEVENCIES LIKE ADV, ESIC FORMS,
PF WITHDRAWL, ETC.
FORM NO 30 & 31 INSPECTION OF CRANES & CHAIN PULLEY BLOCKS.
POLLUTION REPORT – WATER AND AIR POLLUTION.
COMBINED FORM NO 20, TO FACTORY INSPECTION AND COPY
TO ASST, LABOUR COMM, LAB OFFICER.
The total manpower consists of 380 employees
Manager 1
Supervisors 12
Junior Engineers 3
Operators 32
Helpers 332.
Babasabpatilfreepptmba.com
Page 38
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
CHAPTER –IV
RESEARCH METHODOLOGY
Babasabpatilfreepptmba.com
Page 39
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
RESEARCH METHODOLOGY METHODOLOGY The term methodology refers to the process, principle and procedure by which the problems are approached and answers are seeked. The methods chosen by an individual are greatly influenced by his/her assumptions interests and goals. One methodology differs from another in this respect and hence the conclusions arrived may also vary. This chapter aim to present a clear idea of research procedure used in this study. Since the value of systematic and scientific research lies in the methodology. The goals should be reached with accuracy using least amount of time precise planning prevents the study from deviating from the aims and objectives, the scope set forth. A clear undSerstanding of the problem statement, scope of the study objectives research design,
and tools of data collection is necessary as they lend
credibility and well act as catalysts in putting the concepts into practice. Hence, these concepts have to be under stood first in order to approach the different aspects of the study. STATEMENT OF THE PROBLEM:The management world has seen many new ideas, concepts, through innovation etc., which have emerged almost each day with the object of achieving result for the organizations. One such concepts in TQM, which is almost done by, or other way using different techniques, is QUALITY CONTROL, which was lead to many questions such as what kind of METHODS ADOPTED IN IMPROVING THE QUALITY, It is desirable to use different technique in REDUCING THE REJECTIONS, The study is being under taken to know the relative importance and effectiveness of an
ISO
PROCEDURES ON QUALITY CONTROL AT SHANTI IRON AND STEELS UDYAMBAG , BELGAUM . Babasabpatilfreepptmba.com
Page 40
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
The topic of the research report is “ A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL”.
OBJECTIVES OF THE STUDY •
TO STUDY THE REASONS WHY SIS OPTED FOR ISO.
•
TO STUDY HOW ISO CAN HELP TO IMPROVEVISE THE QUALITY.
•
TO ANALYSE THE REASONS FOR REJECTIONS IN PRE-ISO PERIOD.
•
TO STUDY HOW ISO IMPLEMENTATION HAS HELPED TO REDUCE REJECTIONS AND IMPROVE QUALITY CONTROL AT SIS.
RESEARCH DESIGN Research design is a plan for the collection and analysis of data in a manner that aims at maximum relevance. This study is in explorative research design method. Exploratory Design: This method helps to gain the background information, to define the terms, to clarify the problems and to establish the research objectives.
TIME AND PLACE OF THE STUDY The study was conducted at “SHANTI IRON AND STEELS”. The factory is located at udyambag, near khanapur road , Belgaum. The study was conducted during General shift (8.30 am to 5.00 pm) from 15 th JUNE to 15th Aug 2009.
Babasabpatilfreepptmba.com
Page 41
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
TOOLS USED FOR DATA COLLECTION Primary data collection method : Interaction with the Accounts Manager and Quality control supervisor in SIS. Secondary data collection method : •
Company Brochure
•
Collected Pre & post ISO period Balance sheets
•
Through Internet
•
Magazines
•
Guidelines provided to company by ISO team Bangalore – a true copy.
Techniques used for analysis: •
Fish Bone Technique by Dr. Kaoru Ishikawa
•
Operating Ratio .
•
Inventory turnover Ratio.
Babasabpatilfreepptmba.com
Page 42
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS�
A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SHANTI IRON AND STEELS INTRODUCTION TO ISO The INTERNATIONAL ORGANISATIONS FOR STANDARDISATION (ISO) was founded in 1946 in Geneva, Switzerland where it is still headquartered. Its mandate is to promote the development of international standards to facilitate the exchange of goods and services worldwide. Recognizing the importance of quality systems, the ISO has developed a series of standards, which is popular as ISO 9000. These international standards were jointly developed by all ISO member countries and are being adopted throughout the world.The ISO 9000 is a series of standards in quality management systems, which can be adopted by all types of organizations belonging to the government, public, private or joint sectors, producing and supplying all kinds of goods , services and software. These standards are generic and not specific to any particular product. They can be used for managing the quality of output of manufacturing and service industries. These standards were published for the first time in 1987. The aim was to effective document quality management system requirements which needed to be implemented to attain customer satisfaction. The implementation of ISO 9000 guides in building the quality into products or services by preventing deficiencies during design, production, installation and servicing processes instead of making expensive postproduction inspections and warranty claims and reworking.These standards were revised for the first time in 1994. Based on experiences of several thousand companies, these standards were revised again, the improved version came in 2000.
Babasabpatilfreepptmba.com
Page 43
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
By definition, ISO 9001:2000 is a series of generic standards on quality assurance and quality management. ISO 9001:2000 was created by the International Organization for Standardization: •
Founded in 194
•
Based in Geneva, Switzerland
•
Over 110 member bodies
•
U.S. Representatives to ISO is the American National Standards Institute To date, ISO has created in excess of 3700 standards which are used in various industries around the world.
Meeting Customer expectations and requirements is the main objective of ISO 9001:2000 ISO Registration provides assurance that customers needs are being satisfied In the family of
ISO 9001:2000
standards,
there
are
three
contractual
quality
system models: •
ISO 9000 generally applies to manufacturing companies that design and build their own products and is comprised of 20 quality system requirements.
•
ISO 9002 applies to facilities that whose products are designed and serviced by a subcontractor and who must adhere to all but one of the 20 system requirements (excludes the design control element). We are ISO 9001:2000 Registered.
Babasabpatilfreepptmba.com
Page 44
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
•
ISO 9003 has the most limited scope and only requires conformance to final inspection and test procedures. Must adhere to 16 of the 20 quality system requirements.
•
ISO 9000 is a family of standards, guidelines and technical reports. This is the premier internationalquality assurance award. This family includes:
•
ISO 9000:2000 - a starting point for understanding the standards. It defines the fundamental terms and definitions used in the ISO 9000 family
•
ISO 9001:2008 - This is the requirement standard you use to assess your ability to meet customer and applicable regulatory requirements. Certain third party companies are authorize to assess you to this standard and provide you with the certification. This replaces the older ISO 9002 and ISO 9001:2000 standards.
•
ISO 14001 falls under the ISO 14000 family and is an international standard to evaluate an organization’s environmental management systems
BENEFITS OF ISO 9001:2000 •
Boosts any company’s reputation through the reputation of the International Organization for Standardization (ISO) and recognition of the Quality Management System;
•
Continuous improvement on your Quality Management Systems and processes which improves the reliability of your internal operations to meet customer requirements;
•
Over time, an overall increase in your performance that can positively impact your bottom line. Demonstrating a real commitment to service quality can transform your corporate culture as employees welcome the need for constant improvement;
8 PRINCIPLES OF ISO 9001:2000
Babasabpatilfreepptmba.com
Page 45
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Babasabpatilfreepptmba.com
Page 46
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Babasabpatilfreepptmba.com
Page 47
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
IMPACT OF ISO PROCEDURE IMPLEMENTATION AT SHANTI IRON AND STEELS WHY SIS OPTED ISO QUALITY NORMS (9001:2000) . Shanti Iron & Steel was established with an objective of manufacturing the CI castings only. m/s Addison & com ltd and kolapur machinery ltd are some of the major customers to SIS who are since from 1974, they are in need of both rough castings & machine castings as well ,at that time SIS had only 3 machines was unable to meet customer requirements, even though some customers are interested in SIS due to one major machine called “ITALIO MARIO CARNAGI” double laith machine which gives 100% accuracy . this type of machine was only 2 in Karnataka state, one was with HMT Tumkur and other is with SIS. So SIS is one of the quality castings producer. With a plan of expansion of unit and plan for Export & Import of goods & needs for this
the organization registered with EPCG I,e, Export promotion council &
Guarantee of India. To encatch the foreign customers and to enhance the sales in domestic. EPCG of India has informed SIS to apply for ISO certification with a special audit programme under the International specific organisation which is meant for Audit . ISO is a certifying agency in all departments of any organization to conduct the audit programme under its guide lines. ISO 9001:2000 certifying authority TUV Rhineland company of German is one of the agency ment for ISO certification for Indian and Foreign for quality assurance. Under this agency SIS Issues Guide lines for Quality Assurance. Some documents are required to maintain for ISO certification. 1. Audit report from chartered Accountant. 2. Financial Records such as certified balance sheet, transperancy in all records. 3. Quality policies and objectives, Administration procedures 4. Export & Import documents……. Etc Babasabpatilfreepptmba.com
Page 48
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
After sending the profile of the company for verification of council perusal, The team of ISO certifying agency will visit the organization, they conduct a meeting with top management, negotiates and provide the required guidelines to the organization. One of the major problem of SIS was Rejection of casting machines by customers due to poor quality of raw materials used , no proper planning in production process, mainly for quality assurance and to build a good image of the organization in the minds of customer …etc for these reasons the company opted for ISO certification.
Babasabpatilfreepptmba.com
Page 49
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Babasabpatilfreepptmba.com
Page 50
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS�
TO STUDY HOW ISO CAN HELP TO IMPROVISE THE QUALITY IN SIS After the visit of ISO team TUV Rheinland from Bangalore, they had a meeting with functioning of SIS with
their paper presentation of their requirements for
certification, under this they have suggested SIS some initial measures to be taken as per their guidelines to the following departments. 1. Administration department 2. Accounts department 3. Sales department 4. Quality assurance department 5. Machine shop department 6. Labrotary department 7. Stores & spares department 8. Fettling department 9. Foundry unit 10. Inward & outward 11. Maintenance & security The ISO authority has asked SIS to prepare some of their requirements under representation applicable to each of above said departments. Administrative Department: In this dept the SIS partners I.e. Top management shall establish, document, implemrntation & quality management system and continually improve its effectiveness in accordance with the requirements of International standards. Shanti Iron has following the steps given below I. Identify the processes needed for the quality management system and their application throughout the organization. II. Determining the sequence & interaction of these processes.
Babasabpatilfreepptmba.com
Page 51
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS�
III. Determining the criteria and methods needed to ensure that both the operation and control of these processes are effective. IV. Ensures the availability of the resources and information necessary to support the operation and monitoring these processes. V. Monitor , measures and the processes. VI. Implements the action necessary to achieve planned results and continual improvement of these processes. These processes are managed by the organization in accordance with the requirements of this international standard. Accounts Department: 1. In accounts SIS maintains the records as per the FERA Act and Indian Acts too. 2. An Encompass SAP software is used in the company to maintain the records. 3. If any fraud in accounts keeping the agency is punishes with an imprisonment cash penalties for violating the business resolutions. 4. Under these SIS has to maintain the neat & transperancy in all the departments. Sales Department: 1. In sales the certification authority regarding the existing records and what has to maintain with records is verified and suggested. 2. Sales records is a backbone of organization which is looking after revenue & trading of the organization, the same has been verified by TUV and suggested to minimize the documents. Prior to ISO certification SIS was maintained 1.Rough delivery notes. 2.Fair delivery Notes. 3. Hand written bills 4. Over writing bills 5. Manual calculations of taxes.
Babasabpatilfreepptmba.com
Page 52
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
After ISO Certification •
Tax invoicing policy system in sale bills, as per VAT Act and exercise Act.
•
Time of removal of goods required by central state commercial tax departments.
•
Same has to be posted in electronic media.
QUALITY ASSURANCE DEPARTMENT The ISO Agency had provided the following guide lines in improving the quality management system: Quality sector has came across the thing has to be negotiated with an intension of good quality has to be manufactured the certification team has asked SIS to improvise the qualities in purchasing the raw materials and qualities in different types of raw materials required by the steel. Especially the agency facilitated to purchase the good quality of raw materials which yields 100% contents which are tested by their own LAB, each & every material purchased should be tested in labrotary the yield tested should be recorded in the papers the record should be bring to their Notice this is first round & first change. Their will visit to SIS after Every I, II, III changes implemented.
Babasabpatilfreepptmba.com
Page 53
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
EXAMPLES OF RAW MATERIALS AND IT’S CONTENTS 1. Pig Iron yields manganese,& silicon contents has to be tested. 2. Coke : fuel moisture content . in coke it is highly required for melting purpose. China is the leading producer for coke. 3. Sand: silica content. 4. Copper : ferrous manganese. 5. Brazalian – pig iron.……………………………………..ETC. In general quality management system documentation shall include: a. Documented statements of a quality policy and quality objectives. b. A quality manual, c. Documented procedures required by this International standard, d. Documents needed by the organization to ensure the effective planning, operation and control of its processes, and e. Records required by this international standard,Records shall be established and maintained to provide the evidence of conformity to requirements and of the effective operation of the quality management system. f. Records shall remain legible , readily identifiable and retrievable. g. A documented procedure shall be established to define the control needed for the identification, storage, protection, retrival, retention time and deposition of records. Quality policy a. Is appropriate to the purpose of organization. b. Includes a commitment to comply with requirements and continually improve the effectiveness of the quality management system. c. Provides a frame work for establishing and reviewing quality objectives, d. Is reviewed for continuing suitability.
Babasabpatilfreepptmba.com
Page 54
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
MACHINE SHOP The ISO team has visited the machine shop of shanti Iron& steel, carefully identified the weakness of machine shop s , like over oiling , machining loss….etc the team advised to adopt a type of mechanization or accelerating the machines with sophisticated in foundry 1. Due to this adoption foreign customer will not reject the materials. SIS had replaced the manual operated machines to computerized machines, i,e. HMC- Heavy duty machines especially CNC machines. (computer Numeric controlled machines). SIS had 2 CNC machines which is fully utilized, 1 CNC has the capacity of producing 100 machines for 8 Hrs. Here the highly qualified &skilled operator has been appointed to look after machining process in CNC . When the SIS had purchased the first CNC machine
from Japan fully
computerized HMC machine for Rs. 1,85, Lakhs against the Investment susidy Rs.10 lakhs .Investment subsidy for fixed Asset especially the machines is declared by central Govt to promote the Indian Industry under the guide lines of financial & officers of a GOVT of Karnataka. It observes the credibility of different departments of SIS and with a communication to the Banker. i.e. Canara Bank – Tilakwadi Branch Belgaum. Banker will collect the documents from SIS for repurkasion to sanction of the subsidiary. Here the bank term loan facility is availed. Such type of encouragements to boost the production units are entertained by central& state GOVT. The machine castings of SIS are supplied to – 1. Atlas copco com ltd. 2. New Holland Tractors. 3. Same Dued Italy
Babasabpatilfreepptmba.com
Page 55
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
4. Worth silla Finland. …..etc the exports are enhanced due to accuracy in machining and good quality of raw materials used. LABROTARY DEPARTMENT: As per guidelines of ISO SIS has maintained the separate LAB to Test CI scrap, Manganese , coke , pig iron, ..etc are tested with high range chemicals in different processes in different machines for this purpose a specially manufactured carbon cups from suge foundry solutions pune has brought, here the yield from raw material is keenly exchequed gives correct and efficiency in the raw materials purchased. In pre ISO period the materials are tested in cluster foundry centre in belgaum city, which was delayed processes and not gives accurate result. STORES AND SPARES DEPARTMENT : In the shanti Iron & Steel the value of stores department is more than 5 Crs . here the required materials are filled with machine tools , belts , oil lubricants, kerosene, disel are stored for day to day requirements. ISO 9000:2002 verified the system of stores & spares before the certification it was not sophisticated and now fully computerized , each & every invoice with material is Inward & recorded for this a concerned responsible person pass Goods Inspection Report(GIR) ,under the supervision of owners entity. This type of systematic application makes the Inward& outward system of Goods hasel free one because leakages and losses are minimized. FETLING DEPARTMENT : In this department produced machines are cleaned with a process of short blastings of products this processes is known as GrInding , pasting as per the customer requirement. FOUNDRY In the foundry the meeting with supervisors of SIS with a ISO team has been discussed with a processes adopted in manufacturing the castings . Babasabpatilfreepptmba.com
Page 56
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
How the processes of moulding , mixing of required raw materials. After moulding , it has verified core making after this processes the pouring of materials is usually followed here the
ISO advised to replace the existing system of cupola with
Furnase melting. cupola – usually the coke & fire wood are charged by burning processes which creates heavy smoke and it has to be redressed with every 12 melts other wise it causes machining loss, instead of this the electric furnase the processes is fully electrified and smoke less which causes no air pollution it gives the accuracy for machining, under the ISO norms it has been improved the quality with hasel free less air and water pollution. MAINTAINENCE Maintainence supervisors are appointed in all the departments especially in foundry unit for every machine had a experienced supervisor, to look after the machines and control them. Infrastructure Development : The SIS had provide and maintain the infrastructure needed to achieve conformity to the product requirements- it includes a. Buildings, work space and associated utilities. b. Processes equipment (both hardware & software) and c. Supporting services such as transport & communication. SECURITY: This system in SIS is essentially motivated with skilled security persons and security is closed , monitored round the clock under the ISO norms . For this 8 persons are appointed to security Grievances each shift has been placed by 4 members for 24 Hours.
Babasabpatilfreepptmba.com
Page 57
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
TO IDENTIFY THE REASONS FOR REJECTIONS IN PRE ISO PERIOD Rejection is the major issue in shanti Iron & steels due to many reasons. Types of Rejections can be categorized into 1. Manufacturing Rejection 2. Labour Rejection 3. Technical Rejection 4. Machine Rejection
CAUSES FOR REJECTION OF MATERIALS ANALYSED THROUGH “FISH BONE TECHNIQUE”
Babasabpatilfreepptmba.com
Page 58
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
ABOUT FISH BONE TECHNIQUE What is a Fishbone diagram? Dr. Kaoru Ishikawa, a Japanese quality control statistician, invented the fishbone diagram. Therefore, it may be referred to as the Ishikawa diagram. The fishbone diagram is an analysis tool that provides a systematic way of looking at effects and the causes that create or contribute to those effects. Because of the function of the fishbone diagram, it may be referred to as a cause-and-effect diagram. The design of the diagram looks much like the skeleton of a fish. Therefore, it is often referred to as the fishbone diagram. Whatever name you choose, remember that the value of the fishbone diagram is to assist teams in categorizing the many potential causes of problems or issues in an orderly way and in identifying root causes. When should a fishbone diagram be used? Does the team... •
Need to study a problem/issue to determine the root cause?
•
Want to study all the possible reasons why a process is beginning to have difficulties, problems, or breakdowns?
•
Need to identify areas for data collection?
•
Want to study why a process is not performing properly or producing the desired results?
How is a fishbone diagram constructed? Basic Steps: 1. Draw the fishbone diagram.... 2. List the problem/issue to be studied in the "head of the fish". 3. Label each ""bone" of the "fish". The major categories typically utilized are:
The 4 M’s: •
Methods, Machines, Materials, Manpower
The 4 P’s: •
Babasabpatilfreepptmba.com
Place, Procedure, People, Policies Page 59
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
The 4 S’s: •
Surroundings, Suppliers, Systems, Skills
Note: You may use one of the four categories suggested, combine them in any fashion or make up your own. The categories are to help you organize your ideas. 4. Use an idea-generating technique (e.g., brainstorming) to identify the factors within each category that may be affecting the problem/issue and/or effect being studied. The team should ask... "What are the machine issues affecting/causing..." 5. Repeat this procedure with each factor under the category to produce subfactors.Continue asking, "Why is this happening?" and put additional segments each factor and subsequently under each sub-factor. 6. Continue until you no longer get useful information as you ask, "Why is that happening?" 7. Analyze the results of the fishbone after team members agree that an adequate amount of detail has been provided under each major category. Do this by looking for those items that appear in more than one category. These become the 'most likely causes". 8. For those items identified as the "most likely causes", the team should reach consensus on listing those items in priority order with the first item being the most probable" cause.
Babasabpatilfreepptmba.com
Page 60
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Manufacturing Rejection:
In pre ISO period rejection is Renasty because in the floor the unskilled workers who is working in the manufacturing processes, depends upon his technique, experience in use of raw materials and proportionating the raw materials .Usually in the foundry the first phase is mixing the sand with chemicals & several application of raw material while forming the pattern for mould. •
Improper mix of raw materials.
•
Use of poor quality materials
•
Over pouring of liquid materials
•
Over grinding of machines & over machining by vernier caliper.
•
No clarity in melted material which leads to glow holes in castings.
Babasabpatilfreepptmba.com
Page 61
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
LABOUR REJECTION
•
Due to mishandling of materials.
•
Improper mix of using the raw materials.
•
Such as scrap, pig iron, coke, sand …etc is not mixed in a sequential.
•
Due to qupola machine – it is a boiler which is to be dressed for every 12 melts, by fire bricks and ceramic bricks. Stand by arrangement has to be made alternatively , labour will not bring to the notice that it should be redressed he will go on manufacturing it leads to glow holes in castings as well as proper pattern is not formed ultimately leads to rejections.
TECHNICAL REJECTIONS •
Due to lack of technical feasibility.
•
Lack of experience of workers.
•
Negligence of moulder leads to rejections.
•
Efficiencient skill of fettler is required.
Babasabpatilfreepptmba.com
Page 62
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
MACHINING REJECTIONS •
Over machining by vernier caliper and over grinding.
•
Over oiling & pouring of liquid materials leads to glow holes in castings.Above are the main causes of rejection of materials in SIS. Rejection rate was very high upto 20% the company was bearing huge losses in pre ISO period.
To study how ISO implementation has helped to reduce the rejections & improve quality control in SIS. After the ISO adoption: Quality policy has entrusted in Shanti Iron & Steel by ISO Team. •
Quality policy:
a. Good quality of Raw materials used as per the customer
requirement.A common foundry cluster in belgaum , SIS uses this lab to test the materials. •
Iso enterance made a separate lab , which costs Rs.25 lakhs.
•
Leadership Techniques:
•
The skills of supervisors, skilled & unskilled workers can create a good atmosphere on customery focus also examined in SIS.
Here the ISO team advised some of the measures to be taken regarding the techniques used in – 1. Executives- working in manufacturing department they should be careful about quality management. 2. Value & Expectations: Appropriations made before production and analysis afterproduction. 3. Contribution of the employees to be taken into consideration before and soon after the working pattern of supervisors should be recognized befor their working in the floor. 4. Quality management: quality policy is well managed and working upto customer satisfaction. 5. Performance profile of the company is exchequed by the customers, ISO team alerts the organization in all the way to perfom better way. Babasabpatilfreepptmba.com
Page 63
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS�
6. Commitment in SIS is fully satisfied upto determinatory level and the quality policy is well planned before and achieved as per the plan, totally it is effective after the impact of ISO is verified. 7. Data regarding the performance: Here the effective role in improving the quality, improving the performance, improvements in operation recording of the datas through out the departments.
Babasabpatilfreepptmba.com
Page 64
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
CHAPTER –V
ANALYSIS AND INTERPRETATION
CALCULATION PART AND ANALYSIS INVENTORY TURN OVER RATIO: It is ascertained by dividing the sales by the closing stock also called as stock turn over ratio. This ratio reveals the number of times stock is replaced during a given accounting period. This ratio reveals the number of times stock is replaced during a given accounting period.
INVENTORY TURNOVER RATIO =
Babasabpatilfreepptmba.com
SALES CLOSING STOCK
Page 65
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Year 1999 2000 2001 2004 2005 2006 2007
ITR=SALES/CLS.STOCK 41,153,114.98/4,815,000.00 39,424,168.20/4,003,000.00 41,259,386.46/3,924,500.00 84,678,207.88/9,126,000.00 132,027,352.84/6,135,000.00 149,370,627.94/5,573,697.00 194,025,950.00/6,170,000.00
INTERPRETATION:
Higher the ratio indicates
RATIO 8.546 9.848 10.513 9.278 21.52 26.799 31.446
that finished stock is rapidly
turnover (sales) .
Babasabpatilfreepptmba.com
Page 66
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Standard is 8 times in a year . If the actual ratio is more than 8 times it indicates that more sales are effected and effective inventory management and goods are sold many times in a year. From the above graph in the year 1999 – 8.546 times in pre ISO period and after the entry of ISO it has been increased to 21.52 times in 2005 and 31.446 times in the year 2007. A positive effect of ISO procedures can be observed. EXPENSES RATIO YEAR OR= FACTORYEXPS/NET RATIO OPERRATING RATIO: SALES*100 1999 11,147,160.02/41,153,114.98*100 27.087 OPERATING 2000 =
FACTORY EXPENSES * 100 11,183,108.34/39,424,168.20*100 11,165,809.94/41,259,386.46*100 NET SALES
28.366 27.062
2004 2005
18,007,573.81/84,678,207.88*100 23,560,628.17/132,027,352.84*100
21.265 17.845
2006 2007
27,718,477.15/149,370,627.94*100 37,785,742.76/194,025,950.00*100
18.556 19.474
2008
46,915,318.79/257,212,529.40*100
18.239
RATIO2001
Babasabpatilfreepptmba.com
Page 67
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
IN PERCENTAGE CALCULATION FOR 5 YEARS RATIO 27.087 28.366 27.062 21.265 17.845
Babasabpatilfreepptmba.com
IN % = 28.366/27.06= .047 .047 .95 .78 .83 .39
Page 68
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS�
Interpretation: The lower the ratio greater is the profitability , the higher the ratio the lower the profit. From the above graph in the year 2000 I,e pre ISO period it was 32% and in the year 2005 it has came down to 13% (19 % is decreased). The organization is said to be in good position. Effective implementation of Iso procedures and and had a positive impact on quality of the materials , the rate of rejection of materials had been reduced.
Babasabpatilfreepptmba.com
Page 69
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
IN POST IMPLEMENTATION OF ISO PERIOD THE FISH BONE TECHNIQUE:
Babasabpatilfreepptmba.com
Page 70
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
CHAPTER –VI
FINDINGS
FINDINGS OF THE STUDY 1. Quality refers to “fitness for use” , it plays a vital role in any of the organization . it creates a positive impact and build the credibility worth of the organization. 2. This project Reflects that effective Implementation of ISO 9001:2000 procedures on quality control lead to reduction in the rejection of materials.
Babasabpatilfreepptmba.com
Page 71
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
3. In the “Inventory Turn Over Ratio” –the stock turn over ratio in pre ISO period was only 8.54 times and in introduction of ISO post period increased to 31.44 times. The sales turn over of the company has been rapidly increased. 4. In the operating Ratio: OR = factory expenses/net sales*100The expenses has been decreased by 32%
(in the year 2000) to 13% (in the year 2005), by
increasing the Net sales yearly . 5. By analyzing the study of the organization , ISO guidelines ensures the organization quality control reduce cost by improving the quality. 6. Modernization
&
mechanization I,e. introduction of CNC tooling machine,
electric furnase, SAP software to maintain
the records..etc lead
to overall
development of the organization and icreased the accuracy in production. 7. Through the “Fish Bone Technique” the root cause and effect of the management problem can be clearly identified. 8. Rejection of materials was
the major issue of the organization, in pre ISO
certification period, by the entry of separate labrotary testing of raw materials contents & yield of each item reduced the rejections and improved the quality of the product. 9. ISO quality assurance enhanced the International trade activities, from the year 2006 the SIS is exporting the goods to Finland ,& Italy. 10. By overall study of the organization SIS, it can be said that •
Quality assurance from the ISO 9001:2000 had minimized the losses and reduced the rejection rate.
•
By the guidelines of the ISO TUV Rhienland team, the infrastructure as well as the methods of production procedures in SIS has positively impacted .
Babasabpatilfreepptmba.com
Page 72
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Babasabpatilfreepptmba.com
Page 73
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
CHAPTER –VII
LIMITATIONS AND CONCLUSIONS
LIMITATION OF STUDY This study is not free from limitations ; the results of the study are not conclusive therefore this study from some limitations•
This project is just a brief summary of ISO procedures implementation on quality control , QC not only depends upon ISO Norms many other factors which I have not mentioned because my objectives of the study is limit to specific topic.
•
The area of specialization is in the field of finance; the aspects of marketing & HR are not covered completely.
•
The project limits in the statistical figures because some confidential records of the company can’t be disclosed.
Babasabpatilfreepptmba.com
Page 74
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Babasabpatilfreepptmba.com
Page 75
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
CONCLUSION From the above study, It can be concluded that Implementation of ISO 9001:2000 procedures has positively affected the organizational development and has helped in reducing the rejection rate of casting machines at Shanti Iron And Steels. ISO guidelines creates a cordial relationship among all the departments like production, foundry unit , finanace, quality control, etc..,. It improvises the quality of the products as well as in working procedures. So that the common goal of the company can be achieved by Team work with proper planning and procedures adopted by the company. ISO
9001:2000
certification
enhanced
the
credibility
worth
of
organization. In plant –Training of the project, has helped me to get the practical knowledge of the Industry
as well as application of theory concepts into practical
aspects.
Babasabpatilfreepptmba.com
Page 76
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
CHAPTER –VIII
BIBILOGRAPHY
BIBILOGRAPHY •
TOTAL QUALITY MANAGEMENT BY POORNIMA CHARANTIMATH
•
FINANCIAL MANAGEMENT BY KHAN & JAIN
•
COMPANY BROCHURE
•
INTERNET .
Babasabpatilfreepptmba.com
Page 77
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
ANNEXURE •
ISO GIDELINES TRUE COPY BY COMPANY
•
BALANCE SHEET & INCOME STATEMENTS.
Babasabpatilfreepptmba.com
Page 78
“A STUDY ON IMPACT OF ISO PROCEDURES ON QUALITY CONTROL AT SIS”
Babasabpatilfreepptmba.com
Page 79