You can now simply purchase your SP products online at sptools.com & pick them up from your local SP Destination Store.
1 MAY - 30 JUNE 2018 ISSUE
16v WORKSHOP 5PC PERFORMANCE COMBO KIT PLUS BONUS TOOL BAG
BONUS TOOL BAG
16v mini 3/8’’dr impact wrench • Speed: 2400rpm • Torque: 185Nm
16v Industrial Grease Gun
• Pressure: 6000psi • Flow Rate: 70g/min
16v mini 3/8’’ (10mm) Drill Driver
895
$
SP82186
SINGLE MINI COB LED OPTICAL LENS FLOOD LIGHT
NEW
• Hand torque: 54N-m • Capacity: 10mm • Length:170mm
SP-1762B
Product details on pg 5
PAGE 5
99
$
PLUS BONUS 12PT METRIC DEEP 3/8” DR 10PC SET SOCKET RAIL
SP81482
19
$
12
$
• Variable speed trigger with brake - 2200rpm • Powerful motor delivers 105Nm of torque • Ergonomic soft grip handle • Capacity: 3/8’’ (10mm)
199
$
SP-111
BONUS VALUED AT
$59
N SP DESTINATIO! US N BO STORE Y EXTRA BATTER
BONUS VALUED AT $49
YOUR LOCAL STORE:
• Brass Inlet • Length 100mm
2x 2.0ah Batteries & Charger PLUS BONUS OPEN MOUTH TOOL BAG
SP81113B
NORMALLY
100mm LONG NOZZLE AIR DUSTER
• Torch: 30 LUX • Worklight: 160 LUX
105Nm
149
FOR MORE CORDLESS LIGHTING
• Speed: 2300rpm • Torque: 140Nm
16v led Worklight/Torch
12V 3/8”DR MINI IMPACT WRENCH TORQUE
3/8”DR MINI AIR RATCHET WRENCH
$
CHECK OUT
• Speed: 1550rpm • Torque: 2 7Nm
16v mini 1/4’’ hex impact driver
NEW TO THE RANGE STARTER TOOL KIT
SPTOOLS.COM
66 PIECE
SUPER QUIET
FEATURES • Heavy duty steel tool box • Spanners, sockets & accessories are housed in hi-density EVA foam storage tray • Extra large volume storage compartment.
4.3HP INVERTER GENERATOR • HP: 4.3Hp • KVA: 3kva • Max Watts: 2500w • Rated Watts: 2300w • Power Outlets: 2 (15amp) • Power: 50Hz/240v • DB: 65dB • Tank Capacity: 4L • Starting System: Pull • Net Weight: 27Kg • Operating Hours: 4.5h at 50% Load
3
ALL THE ESSENTIALS YOU WILL NEED TO GET STARTED
1395 299
$
YEAR ENGINE WARRANTY 4 YEARS DOMESTIC
FEATURES: • Torini 4 Stroke Engine • 3 in 1 Multi-function Control • Engine Smart Control (ESC) • 32 bit Inverter Core • Low Running Noise - 65dB • 12 Volt Outlet
$
SPGi3000
• Parallel connection cable included • Robust construction • Easy access oil-change compartment
SP INVERTER GENERATORS meet EPA, Proposed Australian Emissions & strict Californian pollution standards
CLUB HAMMER
29 $35
MODEL
SIZE PRICE
MODEL
SIZE PRICE
SP30335
45oz
SP30333
32oz
SP30352
53oz
SP30349
48oz
SP30370
70oz
18 $ .95 19 $ 25
SP30365
64oz
$
strength and durability • Strengthened ratchet gear teeth to sustain applied torque • Knurling on handle for increased grip in greasy and oily conditions
FROM
$ • One Piece Steel Handle
29 $ 39 $ 45 $
MODEL
SIZE
SP21392
1/4”Dr
PRICE $
SP22392
3/8”Dr
$
SP23392
1/2”Dr
35 39 $ 49
269
$
SP-1900
2
• SPEED: 70,000rpm • LENGTH: 156mm • WEIGHT: 350g • CAPACITY: 3mm (1/8”) • AIR CONSUMPTION: 0.14m3/m in
• Polished full steel handle for easy clean up • Reversible • Quick release
SHIFTERS
AIR MICRO GRINDER • Slim, lightweight, durable and comfortable to use and hold • High-speed rotation with variable speed throttle control up to 70,00rpm • Extremely flexible 1.5m long hose • Ideal for precision grinding welding surfaces, cleaning and polishing various metals and porting cylinder heads. • Rear air exhaust
• Screwdrivers • Hammer - 16oz ball pein • Tape measure • Utility knife & hacksaw • Tote tray steel tool box
COMPACT HEAD RATCHET 60 TEETH • Chrome vanadium steel for
FROM
$ • Fibreglass Handle
• 45T ratchet & extension bar • Combination and long nose pliers • Diagonal cutters • Multigrips and adjustable wrench • Hex key set
CLUB HAMMER
FROM
18
T850090
KIT INCLUDES • Combination ROE spanners - 8 to 19mm • 1/2”Dr sockets - 8 to 20, 22, 24, 27, 30 & 32mm • Spark plug sockets - 16 & 21mm
Adjustable Wrench Set Heavy Duty 3 PIECE
$
SET INCLUDES: • 150mm (6”) • 200mm (8”) • 250mm (10”)
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT
• Chrome vanadium steel • Slimline for tight areas • Laser etched width gauges • Precision ground jaws • Excellent leverage • Easy grip comfort handle for maximum torque
49 T818000
WWW.SPTOOLS.COM
SP ESSENTIALS QUICK FLOW DRILL PUMP KIT • Universal adaptor straps to all drill sizes • 3 Litres per minute at 1,200 RPM • Steel gear shafts running in brass bushes • Suitable for long run cycles • Positive priming • 1/4” hex to 3/8” drive drill adaptor inc. • Quick connect couplers for hose interchange and storage • Also able to run using 3/8”dr air ratchets
NOW AVAILABLE Ideal for transferring engine oil, automatic transmission, gear oil, power steering fluid, brake fluid, coolant, engine oil pump out, gear oil change, bilge pump out, hydraulic oils, machining coolants etc.
249
99
$
SP71196
6PC PRECISION SCREWDRIVER SET • 3 x Slotted Screwdrivers 2.0x50, 2.5x50, 3.0x50mm • 3 x Phillips Screwdrivers #000x50, #00x50, #0x50mm
Visit sptools.com for full list of supported vehicles
135
$
SP71201
NOTE: DRIL NOT INCLUDED
WORKSHOP 4 OUTLET POWER BOARD
• 4 individually switched outlets • Surge protected • Cord length (approx.): 1.1m
4PC TELESCOPIC INSPECTION MIRROR & PICK UP TOOL SET • Easily retrieve small, hard to reach objects Swivel head telescopic mirror: • Extends 250-925, Ø 57mm Telescopic pick up tool: • Extends 160-645mm 3x interchangeable magnetic heads
29
$
SP34020
• 4x slotted • 4x phillips
• Kit contains adaptors required to refill many sealed automatic transmissions.
$
KIT INCLUDES • 1/4” hex to 3/8” drive drill adaptor • 2 x 8mm x 1m hose • 1 x 6mm x 1m transmission suction hose • Blow mold storage case
8PC TANG THRU SCREWDRIVER SET IN X-CASE
QUICK FLOW TRANSMISSION ADAPTOR KIT TO SUIT QUICK FLOW DRILL PUMP KIT (SP71196)
SP34005
29
29
$
$
SP69999
SP PREMIUM FITTED AIR HOSE
EAR PROCTECTION - EXTREME PERFORMANCE • Quality sound
Made from an engineered hybrid polymer that provides superior all-weather flexibility.
absorbing foam to protect ears • Class 5 32db protection for high noise applications • Soft edged hi-vis ear cups for maximum comfort, increased visibility & safety
ANTI-KINKING TECHNOLOGY
EXTREME
FLEXIBILITY
• Hose will not kink when under pressure. • One-touch Nitto™ style couplers • Swaged hose clamps • 10mm / 3/8” I.D • UV treated
SP31490
49
$ 15m
SP66-15N
AUTOMATIC WIRE STRIPPERS • 200mm wire stripper for 0.2-6.0mm2 • Wire cutter
29
$
SP32278
29
79
$
$ 30m
CLEAR LENS SAFETY GLASSES
• Tough polycarbonate clear lenses • Wrap-around design to maximise coverage • Protects eyes from all angles
SPR88
SP66-30N
4PC POLY SCRAPER SET • 19, 22, 25 & 38mm • Non-marring
4PC DEBURRING TOOL SET
29
SPR80
LINE CLAMP SET - 3PC
• Light weight, non conductive • Jaw design eliminates damage to hoses
• Designed to remove burrs from plastic, copper, aluminium & ferrous metal pipes • Pocket clip
$
• Covers Sizes: 3 to 57mm
35
$
SP30813
You can now simply purchase your SP products online at sptools.com & pick them up from your local SP Destination Store.
4.75
$
SP31340
45
$ HI-VIS
SP70713
SHOP ONLINE OR ON YOUR SMART PHONE
3
MAX POWER MAX RUN TIME MAX PERFORMANCE 18v 5.0Ah LITHIUM-ION IMPACT WRENCHES 1/2” CORDLESS IMPACT WRENCH
3/4” CORDLESS IMPACT WRENCH
• Bolt busting torque: 1788Nm • Torque: 1100Nm
799
• Bolt busting torque: 1490Nm • Torque: 1000Nm
$
695
$
SP81140LE
SP81130
8pc 3/4” Dr 6pt impact socket set • Sizes 24, 27, 30, 32, 34, 36, 41 & 46mm. Bonus valued at $195
Includes 2x 5.0Ah Batteries + Charger
12v 3/8”DR (10mm) DRILL DRIVER
12V 1/4” HEX MINI IMPACT DRIVER PLUS BONUS
TORQUE 17Nm
6000PSI
189
$
SWAP BETWEEN SOCKETS & BITS QUICKLY & EASILY SLIDE
• RPM: 2200rpm • Torque: 90Nm
199
$
Includes 1x 2.0Ah SP81141 Battery + Charger ALSO AVAILABLE IN SKIN ONLY OPTION - SP81141BU - $139
12v LED WORKLIGHT/ TORCH
12v 3/8”DR MINI RATCHET WRENCH
• 4 angle settings: 90°, 120°, 150° & 180° • Two light sources: 4pc LED light panel 28pc LED light panel
99
Includes 1x 2.0Ah Battery Only
SP81412
ALSO AVAILABLE IN SKIN ONLY OPTION - SP81412BU - $69
4
• Variable speed trigger with brake - 2400rpm • Powerful 4 pole motor delivers 185Nm of torque • Ergonomic soft grip handle • Capacity: 3/8’’ (10mm) • Charging Time: 1 hour auto cut-off (±10min)
250RPM
ADJUSTABLE
$
185Nm
SPEED
160 LUX
• Compact design for tight access areas • Reversible Includes 1x 2.0Ah • Built-in LED light Battery + Charger illuminates work area
249
Includes 1x 2.0Ah Battery + Charger
TORQUE
54Nm
WORKLIGHT
SP81513
16V 3/8”DR MINI IMPACT WRENCH
TORQUE
30 LUX
369
$
Includes 1x 2.0Ah SP81213 Battery + Charger ALSO AVAILABLE IN SKIN ONLY OPTION - SP81213BU - $120
TORCH
70g Per Min
• 450cc cartridge size • 750mm ultra-flexible hose • 6000psi max delivery pressure • 70g/min flow rate • Air bleed valve simplifies air removal during loading • Multiple loading options (cartridge, bulk & suction) • Non-slip finish for better grip
SOCKET ADAPTER
BIT ADAPTER
16V INDUSTRIAL GREASE GUN PRESSURE FLOW RATE
2-in-1 Socket/Bit Adapter
• Adjustable 2wo speed: Low: 700rpm High: 1700rpm • Powerful motor • 10 section clutch torque control • Gear box with spindle lock • Single sleeve keyless chuck
Includes 2x 5.0Ah Batteries + Charger
PLUS BONUS IMPACT SOCKET SET
$
249
$ SP81614
ALSO AVAILABLE IN SKIN ONLY OPTION - SP81613BU - $189
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT
SP81119
WWW.SPTOOLS.COM
Includes 1x 2.0Ah Battery + Charger
NEW
CORDLESS LED FLOOD LIGHTING
RECHARGEABLE MINI COB LED OPTICAL LENS FLOOD LIGHT & MAGNETIC SWIVEL BRACKET • High power 10w COB LED light • Multifunctional work lamp ideal for applications where power is limited • 2 brightness settings: 1000Lumins & 500Lumins • 3 to 6 hour run time • Compact “pocket” size • Includes 180° rotatable magnetic bracket • Rechargeable micro USB system • IP65 – Resistant to water and dust infiltration • Universal clip secured by M8 connector • Battery charge indicator • Multifunction on/off switch • Includes 12v car charger adaptor
SINGLE MINI COB LED OPTICAL LENS FLOOD LIGHT
LIGHTWEIGHT & PORTABLE
Includes 1 cordless flood light & 1 adjustable tripod
99
175
$
$
SP81482
SP81485
SP CORDLESS LIGHTING SLIMLINE COB LED WORKLIGHT & TORCH
PREMIUM UNDER BONNET CORDLESS LED WORKLIGHT
EXTENDABLE 1150mm to 1800mm
NEW
• Ultra bright COB LED worklight - 600Lumin • High power LED torch/top light - 120Lumin • Slimline head • Adjustable dimmer switch worklight • 360° swivel ball joint magnetic base • Base tilt to 45° • 180° fold out hook • Water/splash resistant - IP20 • Impact resistant - IK07 • Rechargeable • Battery level and charge indicator • Micro USB charging system • Battery type: Lithium-ion • Charging time: 4 hours
199 $99
$
SP81466
LED MAGBASE WORK LIGHT
LED PEN TORCH/ WORKLIGHT
• SMD LED magbase • Super brilliant, 250% brighter • Lithium-ion Rechargeable
• 30 LED – 1200LUX • 5 LED spot lights – 200LUX • Ultra bright
• High power COB LED • Pivoting magbase - 180 ° • Swiveling magnetic pocket clip • Rechgargeable
Li Battery ion
Li Battery ion
89
SUPER DEAL LED FLASHLIGHT WITH LASER POINTER
• High power CREE LED • Laser pointer function • Ergonomic design • USB smart charging • Battery: 2000mAH
SAVE $30
39
$
NEW
SP81444
LED MAGBASE WORK LIGHT
99
ADJUSTABLE HEIGHT 950mm to 2000mm
MINI COB LED OPTICAL LENS FLOOD LIGHT WITH TRIPOD KIT
• COD LED swivel magbase • 1000/500Lumin • Lithium-ion rechargeable • Includes 12v car charger
• High power SMD LED worklight • Low power consumption with low heat emission • Brighness control - 2 settings • 360° Swivel light for flexible light positioning • Diffused lens for softer lighting and reduced shadow • Rechargeable - micro USB charging system • Wide 120° light spread • Battery type: Lithium-ion • Charging time: 5 hours
TRIPOD HOLDS UP TO 4 CORDLESS COB LED FLOOD LIGHTS
19
$
$
$
SP81456
SP81455
SP81443
Li Battery ion
.95
SP81480
LED ADJUSTABLE BEAM RECHARGEABLE FLASHLIGHT Recharges using a vehicles on board 12v outlet • Built-in Lithium-ion Battery • Adjustable focal length • 130 Lumens
25
$
SP81490
5
SP AIR TOOLS 1/2”DR STUBBY IMPACT WRENCH
1/2”DR IMPACT WRENCH • Max torque: 815 Nm • Bolt busting torque: 1140 Nm
• Max torque: 420 Nm • Max torque (Rev): 705 Nm • Bolt busting torque: 970 Nm • 93mm Head (Including Anvil)
199
PERFECT FOR CONFINED AREAS WHERE SPACE IS LIMITED
$
P/N: SP-1141B
Bonus valued at $39
Bonus valued at $45
299
$
PLUS BONUS IMPACT PROTECTION GLOVES
PLUS BONUS IMPACT SOCKET RAIL SET
SP-1140EXG
AVAILABLE IN LARGE & X-LARGE
1/2”DR MINI IMPACT WRENCH • Working torque: 390Nm • Max torque: 680Nm • Bolt busting torque: 875Nm • Twin hammer mechanism • Great for tight & confined spaces
3/8” CAPACITY KEYLESS DRILL
• RPM: 2,000 • Forward & reverse
149
149
149
$
$
$
SP-7147EX
SP-2526KL
SP-2257
3/4” DR IMPACT WRENCH
• Max torque: 1290Nm • Bolt busting torque: 1800Nm
• Max torque: 2990Nm • Bolt busting torque: 3500Nm
495
1399
$
$
SP-1133SX
3/8”
• Capacity: 1.6mm steel (14ga) • Capacity: 1.2mm stainless steel • Weight: 1.02kg • Length: 185mm
SAVE
129
EACH
DR.
SP-1133SX-2 1/2”
• Torque: 168Nm • Length: 254mm
$
MODEL
$50
TRADE FAVOURITE
• RPM: 21,000 • Length: 259mm • Direct drive motor with a graduated trigger • Safety throttle lever
149
149
1/4” CAPACITY
• Air Con: 113L/Min • Pulling power 3,100lbs (1407kg) • Nose tips included: 3.2, 4.0, 4.8, 5.6 & 6.4mm • Weight 1.97kg
199
PROFESSIONAL DIGITAL TYRE INFLATOR WITH DEFLATOR • Pressure measuring range: 0-160PSI (+/- 2% @25C) • Air flow: 1.2CFM at 100PSI
SP65510
AVAILABLE IN 3/16” & 1/4” CAPACITY
3/16” CAPACITY
• Air con: 113L/Min • Pulling power 2,100lbs (953kg) • Nose tips included: 2.4, 3.2, 4.0 & 4.8mm • Weight 1.49kg
169 159 SP-2331H
SP-1210
INDUSTRIAL AIR/HYDRAULIC RIVETERS
MODEL
CAP.
PULL POWER
SP-2306
3/16”
2,100lbs (953kg)
$
PRICE
SP-2308
1/4”
3,100lbs (1407kg)
$
199 399
STRAIGHT INDUSTRIAL NEEDLE SCALER • Needle diameter: 1/8 x 7 • Number of needles: 19 • Weight: 2.7kg
299
$
$
$
149
$
SP-7210L
$
SP-2215
• No load RPM: 16,000 • 50mm (2”) Gasket Sander • 4x Surface prep discs (Med.) • 8x Surface prep discs (Coarse) • 4x Sanding discs (#120 Grit) • 4x Sanding discs (#80 Grit)
• Rib textured handle • 23,000rpm
FROM
$
AIR GASKET SANDER KIT - 50mm (2”)
1/4” COLLET STRAIGHT DIE GRINDER
$
SP-1190-2
AIR NIBBLER
RATCHET WRENCHES
• Lever type • 225mm • 11000rpm
1/4” LONG NOSE DIE GRINDER - STRAIGHT EXTENDED
1” DR IMPACT WRENCH
SP-1156TR
6
125mm ANGLE GRINDER
PICTURED: SP18
SP-2470
SP COMPRESSORS ACCESSORIES COMPRESSOR OIL - PREMIUM
• Superior wear & corrosion protection • Maximises pump performance • Minimises vibration & pump noise • Prolongs service life
6.5HP PETROL DRIVEN CAST IRON V-TWIN AIR COMPRESSOR FEATURES • 60lt Tank • Belt drive • Take anywhere & will run several • 356L/min FAD • Filter/regulator air tools at once • 150psi • Ideal for commecial applications • 6.5hp Torini OHV 4 stroke engine • V-Twin pump with alloy heads • Full brass non-return valve • 200mm (8”) solid rubber wheels • One-touch (Nitto style) connector
1649
MODEL
$
SP17P
2.2HP CAST IRON V-TWIN PORTABLE AIR COMPRESSOR
MODEL
HP TANK
FAD
PRICE
398 539
SP11-40X 2.2
36L
126L/Min $
SP12-50X 2.5
50L
182L/Min $
• Trade duty • One man lift • Full brass nonreturn valve • Copper delivery pipe • 200mm (8”) solid rubber wheels • One-touch (Nitto style) connector
TWIN CAST IRON INDUSTRIAL COMPRESSORS • Ideal for commercial applications • Full brass non-return valve • Copper delivery pipe • 200mm (8”) solid rubber wheels • One-touch (Nitto style) connector • Certified safety valve • Large oil level sight glass • Soft start valve • Copper winding motors • Cast iron cylinders • Resettable overload protection
50L Tank
MODEL
HP
AMP
FAD
SP14
2.5
10
230L/min
SP17
3
15
275L/min
• Belt drive • 150psi • Filter/regulator • 10amp/240volt • FAD 194L/min
SP35
7.5
270L
704L/min
SP50
10
270L 1085L/min
139
$
RHR15
10mm AIR HOSE WITH NITTO TYPE FITTINGS MODEL
LENGTH PRICE
36 59
i66-15N
15m
$
i66-30N
30m
$
RECOIL HOSES • 1/4” BSP Fittings
MODEL
SIZE
PRICE
SX-806
6mm
$
SX-809
9mm
$
SX-815
15mm
29 39 $ 59
FILTER REGULATORS AVAILABLE IN 2 TYPES 1/4” Mini
$
SP18
3
60L
309L/Min
$
$
SP1800
3
100L
309L/Min
$
1/4”
895 995
• Independent 3 phase switch box operates by a single phase relay pressure switch
TANK
FAD
PRICE
1195 1395
• 25 micron filte • 4000L/min rated flow • Set pressure: 8-125psi • Air shut-off drain
MODEL
SIZE
PRICE
SFR-202
1/4”
$
SFR-302
1/4”
$
49 69
4 PORT PRESSURE SWITCH
• To suit all single phase compressors • 240volt
FAD 482L/min
• 10mm PVC hose • 1/4” BSP fittings
• 25 micron filter • 550L/min rated flow • Set pressure: 8-125psi
2650 200L
$
HP
$
HP TANK
$
4 Litres
MODEL
PRICE
FROM
5.5
• Ideal for commercial applications • Full brass non-return valve • Copper delivery pipe • 200mm (8”) solid rubber wheels • One-touch (Nitto style) connector • Certified safety valve • Large oil level sight glass • Soft start valve • Copper winding motors • Cast iron cylinders • Resettable overload protection
60L or 100L Tank
Features: • Twin or triple cylinder compressor pump with cast iron crankshaft & cylinder • Steel valve plate with stainless steel valves • Overload protection of electric motor with thermal relay
SP25
SP13-50X
TRIPLE CAST IRON BELT DRIVE PORTABLE AIR COMPRESSOR
ELECTRIC STATIONARY 3 PHASE AIR COMPRESSORS
MODEL
749
$ 50L Tank
19 65
1 Litre
SPCO4000
15M AUTO RETRACTABLE AIR HOSE REEL
PETROL
PORTABLE AIR COMPRESSORS
VOLUME PRICE
SPCO1000s
PRICE
2650 $ 3395 $ 3950 $
PICTURED SP35
29
$
SCA5001
7
SP TOOL KITS 307PC METRIC/SAE CUSTOM SERIES TOOL KIT
SPTOOLS.COM
CUSTOM SERIES TOOL KITS 668(W) x 445(D) x 465(H)
AVAILABLE IN 2 OPTIONS 201PC METRIC ONLY FOR A FULL TOOL LISTING, VISIT SPTOOLS.COM
P/N: SP50120
218PC METRIC/SAE FOR A FULL TOOL LISTING, VISIT SPTOOLS.COM
P/N: SP50121
995
$ HOT PRICE
PLUS BONUS Classic Stone Bros 2008 Ford V8 Supercar 1/18 Scale - Driven by Shane Van Gisbergan
EACH
7 Drawer Tool Boxes - Deep
CUSTOM SERIES TOOL KITS 668 (W) x 445 (D) x 465 (H)
AVAILABLE IN 2 OPTIONS 219PC METRIC ONLY FOR A FULL TOOL LISTING, VISIT SPTOOLS.COM
P/N: SP50127
254PC METRIC/SAE FOR A FULL TOOL LISTING, VISIT SPTOOLS.COM
P/N: SP50123
1295
$ HOT PRICE
• 1/4”, 3/8” & 1/2”Dr sockets & accessories • Metric & SAE ROE spanners • Metric & SAE flare nut spanners • Screwdriver & hex key sets • Pliers & cutters • Multigrips & hammers • Hacksaw & tape measure • Pin punch & chisel set • Pick & tweezers set • Pry bar set • 8 Drawer Tool Box • 7 Drawer Roller Cabinet
EACH
8 Drawer Tool Boxes - Deep
251PC METRIC/SAE CONCEPT SERIES TOOL KIT 730(W) x 475(D) x 485(H)
KIT INCLUDES PREMIUM • ROE combination spanners RANGE ROE • Flare metric/SAE spanners QUAD DRIVE • 1/4”, 3/8” & 1/2”Dr sockets & accessories SPANNERS • Hex keys & screwdrivers • Pliers, cutters & pry bars • Hammer, hacksaw & tape measure • Adjustable wrench • Hook and pick sets • 7 Drawer tool box
1450
Model Car P/N: SP089015
2250
$
SP50105
406PC METRIC/SAE FIELD SERVICE TOOL KIT 890(W) x 510(D) x 615(H) • 6 - 26mm & 1/4” - 1” ROE spanners • 1/4”, 3/8” & 1/2”Dr socket s & accessories • Screwdrivers, Hex & TORX keys • Pliers, cutters & adjustable wrench • Foldback knife & Inspection mirror • Pick up tool & pick set • Magnetic parts tray • Circuit tester & multimeter • Hammer & tape measure • Screw extractor set • 7 drawer field service box
2500
$
SP50115
65PC 3/8”DR METRIC/SAE TOOL KIT • 3/8” dr Metric 8-22mm & SAE 5/16-7/8” sockets • 3/8” dr ratchet, flex handle & wobble extension bars • Diagonal cutters & combination pliers • ROE Spanner 8-19mm • Magnetic Metric & SAE hex keys • Slotted & Phillips screwdrivers
259
$
$
SP52253
8
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT
Bonus Valued at $100
• Stored in a impact resistant polyethylene X-case • Heavy duty hinges and latches
WWW.SPTOOLS.COM
SP51204
268PC TRADE TECHNICIANS TOOL KIT
203PC STARTER PRO TECHNICIANS TOOL KIT STAINLESS STEEL WORK TOP
COLOUR OPTIONS AVAILABLE:
COLOUR OPTIONS AVAILABLE:
White/Blue Handles
White/Blue Handles
P/N: SP52635
P/N: SP52525
White/Red Handles
White/Red Handles
P/N: SP52636
2995
P/N: SP52526
$
METRIC ONLY
EACH
TECH SERIES 13 Drawer Roller Cab with Soft Drawer Close & Cliklok.
Sockets: 1/4” & 3/8”Dr short, deep, E-torx, hex, torx & accessories. 1/2”Dr short chrome, deep impact, wheel nut sockets & accessories. Spanners: 6-24mm ROE, 10-22mm flare nut, E-torx E6-E20, double ring brake bleeder. Tools: Adjustable wrench, hammer, pliers, screwdrivers, hex keys, tape measure, pick set, pin punch set, bit set, ear plugs, safety glasses, filter wrench, razor scraper, feeler gauge, inspection mirror, magnetic pick-up, trim removal, air duster, multimeter, light.
609PC METRIC/ SAE CUSTOM SERIES TOOL KIT
1795
$ METRIC ONLY
EACH
TECH SERIES 7 Drawer Roller Cab with Soft Drawer Close & Cliklok. Sockets: 1/4” & 3/8”dr short, deep, E-torx, hex, torx & accessories. Spanners: 6-24mm ROE, 10-22mm flare nut, E-torx E6-E20, D/ring brake bleeder. Tools: Adjustable wrench, hammer, pliers, screwdrivers, hex keys, tape measure, pick set, pin punch set, bit set, ear plugs, safety glasses, filter wrench, razor scraper, feeler gauge.
530PC METRIC/SAE SUMO SERIES POWER HUTCH TOOL KIT BUILT-IN 4 OUTLET POWER BOARD
• 1/4”, 3/8” & 1/2”Dr sockets & accessories • ROE, stubby ROE & geardrive spanners • E TORX sockets & spanners • 1/2”Dr impact sockets, inhex & TORX bits • Adjustable wrenches • T-handle hex keys & TORX keys • Hammers x3 • Pliers, cutters & wire strippers • Hand riveter, ratchet set • Burr set • Digital multimeter, work light • Filter wrench & metal rulers • 8 Drawer tool box • 7 Drawer roller cabinet
SURGE PROTECTED • Steel pegboard rear wall • Anti Slip Matting
3995
$
6695
$
SP50165
• 1/4”, 3/8” & 1/2”dr sockets & accessories • ROE, stubby ROE & geardrive spanners • E TORX sockets & spanners • 1/2”dr impact sockets, inhex & TORX bits • Adjustable wrenches • Cordless tools: Impact wrench & ratchet wrench • T-handle hex keys & TORX key • Hammers soft/hard face, ball pein & dead blow
SP50555
• Pliers, cutters & wire strippers • Hand riveter, ratchet set & burr set • Digital multimeter, work light, filter wrench & metal rulers • 2x detachable side cabinets • 5 drawer Sumo hutch • 13 drawer Sumo roller cabinet
OWN QUALITY TOOLS AND EQUIPMENT TODAY AND PAY THEM OFF WEEKLY! SP EASY CREDIT CAN HELP YOU FINANCE YOUR S P TOOLS PURCHASE OVER THE COMBINED VALUE OF $1500 AND REPAYMENTS START FROM AS LITTLE AS $14 PER WEEK*.
APPLY NOW AT SPTOOLS.COM
9
SP SOCKET SETS SPTOOLS.COM INCLUDES STANDARD & DEEP SOCKETS
SOCKET RAIL SETS 5PC WHEEL NUT IMPACT SOCKET RAIL SET 6 Point
SP20390
59
$
51PC 3/8” DR 12 & 6PT METRIC/SAE SOCKET SET • 6 - 22mm • 1/4 - 7/8”
• 42T ratchet • Swivel ratchet
199
$
P/N: SP20201
23PC 1/4” DR METRIC/ SAE SOCKET SETS
• Sleeved to protect alloy wheels & nuts. • Colour coded for easy size selection 1/2 sq. drive. • Sizes 15mm, 17mm, 19mm, 21mm & 22mm.
MODEL
POINT
SP20100 SP20102
12pt 6pt
6 Point
99
12 Point
$
SP20360
3/8’’DR HEX BIT RAIL SETS - 100mm AVAILABLE IN METRIC, SAE & SPLINE
1/4”Dr Sockets • Metric 4 to 10mm • SAE 3/16 to 3/8” 3/8”Dr Sockets • Metric 10 to 19mm • SAE 3/8 to 3/4”
1/2” DR 6PT DEEP IMPACT SOCKET RAIL SETS
METRIC - 11pc • 10, 12 to 22 & 24mm • 1 x Socket rail P/N: SP20360
42PC 1/4” & 3/8” DR SOCKET SET IN X-CASE
INHEX
69 129
$ • 4, 5, 6, 7, 8, 9, 10, 11, 12 & 13mm • 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16 & 1/2”
$
EACH
9PC 1/2” DR INHEX METRIC IMPACT SOCKET SET
SP20601
32PC 3/4” DR 12PT METRIC/SAE SOCKET SET
125 $679
$
SPLINE
59
$
SP20370
SP20400
INHEX
EACH
METRIC - 7pc: 4, 5, 6, 7, 8, 9 & 10mm P/N: SP20547 SAE - 7pc: 1/8, 5/32, 3/16, 7/32, 1/4, 5/16 & 3/8” P/N: SP20542 SPLINE - 7pc: M4, M5, M6, M7, M8, M9 & M10 P/N: SP20544
• Metric - 19, 22, 24, 27, 30, 32, 36, 38, 41, 46, 50 & 55mm • SAE - 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8 & 1-7/8”
• 4, 5, 6, 7, 8, 10, 12, 14 & 17mm impact sockets
9PC T-HANDLE SOCKET SET
3/8’’DR DEEP E-TORX SOCKET RAIL SET
PLUS BONUS MAGNETIC STEPPED TOOL HOLDER
• 5 stepped magnetic tool holder for your popular sizes.
Bonus valued at $25
E-TORX - 12pc • E4, E5, E6, E7, E8, E10, E11, E12, E14, E16, E18 &E20
10
89
169
$
$
SP20551
• Flat drive technology offers maximum contact & grip • Sizes included: 8, 9, 10, 11, 12, 13, 14, 17 & 19mm
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT
SP20800
(P/N: SP30906)
WWW.SPTOOLS.COM
LIFETIME WARRANTY
SP SPANNER SETS
• Chrome Vanadium Steel (Cr-V) for high durability • All SP spanners and sockets meets and exceeds international ANSI & DIN standards
12PC METRIC 0° OFFSET GEAR DRIVE SPANNER SET
QUAD DRIVE ROE SPANNER SETS
SIZES INCLUDE: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm
99
$
FEATURES: Dual flat drive technology to maximize grip
169
EACH
MODEL
PIECES
$
SIZE
SP10614 14pc Metric • 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm SP10661 11pc SAE
QUAD DRIVE
SP10212
GEARDRIVE ON RING END
• 1/ 4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 & 7/8”
25PC METRIC/ SAE ROE QUAD DRIVE SPANNER SET
FLARE NUT SPANNER SETS
40º OFFSET RING SPANNER SETS
• 14x Metric Spanners: 6-19mm • 11x SAE Spanners: 1/4-7/8’’
179
$
SP10601
12PC METRIC 0º EXTRA LONG DOUBLE RING GEARDRIVE SPANNER SET
369
$
$ GEARDRIVE ON ONE RING END STUBBY 15º OFFSET REVERSIBLE GEARDRIVE SPANNER SET
SP10412
99
$
65
SIZES INCLUDE: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm
EACH
METRIC - 4pc • 10x11, 12x13, 14x17 & 19x22mm P/N: SP10044
SAE - 4pc • 3/8x7/16”, 1/2x9/16”, 5/8x11/16” & 3/4x7/8” P/N: SP10094
16PC E TORX 3/8” DR SOCKET & SPANNER SET
EACH
METRIC - 6pc • 8x9, 10x11, 12x13, 14x15, 16x17, 18x19mm P/N: SP10136
SAE - 5pc • 5/16 x 3/8’’, 7/16 x 1/2’’, 9/16 x 5/8’’, 11/16 x 3/4’’ & 7/8 x 15/16’’ P/N: SP10185
0º OFFSET LONG RING SPANNER SETS
FROM
195
FROM
159
$ MODEL
PIECES
SIZE
SP10131 11pc Metric 8, 10 to 19mm SP10188
8pc SAE
• 5/16 to 3/4”
PRICE
199 $ 159 $
95
$ E Torx Spanners - 4pc • E6xE8, E10xE12, E14xE16, E18xE20 E TORX Sockets - 12pc • E4, E5, E6, E7, E8, E10, E11, E12, E14, E16, E18, E20
SP20210
You can now simply purchase your SP products online at sptools.com & pick them up from your local SP Destination Store.
$ MODEL SP10035 SP10084
PIECES
SIZE
5pc Metric • 8 x 10, 12 x 14, 16 x 18, 17 x 19, 22 x 24mm 4pc SAE • 3/8 x 5/16”, 1/2 x 7/16”, 5/8 x 9/16” & 3/4 x 11/16”
SHOP ONLINE OR ON YOUR SMART PHONE
PRICE
199 195
$ $
11
DIAGNOSTIC & ELECTRICAL SPTOOLS.COM
QUICK SWITCH 2-WAY DIAGNOSTIC PUMP KIT
QUICKLY SWITCH BETWEEN PRESSURE & VACUUM MODES • 2-Way pressure and vacuum test functions • Intuitive rotary dial mode switch • High volume effciency in both pressure and vacuum modes • Manufactured from bre reinforced composite materials • Integrated rear mount gauge • High quality hoses with quick conect fittings • Custom blow mold storage case
MECHANICS STETHOSCOPE • Helps locate specific engine & accessory noise • Earplug’s to reduce interference • 200mm alloy probe
35 199
$
$
SP62001
DIGITAL AUTOMOTIVE CURRENT TESTERS
BLADE SIZE
SP62008
30A Maxi
SP62009
30A Mini
45
• 14 functions including DCV, ACV, DCA, ACA, resistance, RPM (Tach), dwell angle, duty cycle frequency, MS-pulse, temperature (ºC/ºF), capacitance, continuity & diode check Includes test leads, k-type temperature probe, inductive pick-up, 9v battery & canvas bag
149
$
• Plugs into Cars 12v socket
• Retains setting of computers, radios, clocks, etc. when battery is disconnected • Attaches to 9 volt battery
12
19
SP61054
LIST OF COMPATABLE VEHICLES AND MORE INFO AT WWW. SPTOOLS.COM
ADJUSTABLE ADVANCE TIMING LIGHT
INFRARED LASER GUIDED THERMOMETER
• Quickly tune-up cars, trucks,marine and recreational vehicles • Works on conventional and computer controlled ignition systems • Works on adjustable, nonadjustable timing systems
• Dual laser technology (twin dots) • Rapid detection function • Automatic data hold • OC/OF switch • Emissivity digitally adjustable from 0.10 to 1.0 • Max temperature display • -50°C/550°C range (-58°F/1022°F) • Backlight LCD displays resolution 0.1°C(0.1°F) • Set high & low alarms
• Testing range 0-10,000 rpm • Advance degrees 0º to 60º
99 $159
$
SP62011
SP62040
CIRCUIT TESTER FOR GENERAL & HYBRID CAR • Automatic voltage identification with blue for 12V and red for 42V systems
$
199
$
SP62030
DIGITAL AUTOMOTIVE MULTIMETER
9V MEMORY POWER SUPPLY
• Works with all 1996 and newer vehicles that are JOBD/OBDII/EOBD compliant (Including CAN). • Supports multiple trouble code requests: generic codes, pending codes and manufacturer specific codes. • Determines malfunction indicator lamp (MIL) status. • Retrieves VIN (Vehicle Identification No.) on 2002 and newer vehicles that SP61155 supports Mode 9.
$
EACH
$30
Reads & clears generic & manufacturer specific diagnostic trouble codes (DTC’s) & turns off check engine light.
89
$
SAVE
CAN OBDII/EOBD/JOBD SCANNER CODE READER
• Non contact measurement of RPM • Instant and total RPM function • RPM range 2.5–99,999 • Memory function • 50mm–2000mm range with reflective tape
• Maintains fuse protection while connected
MODEL
SP80020
LASER ACTUATED TACHOMETER
AVAILABLE IN MAXI & MINI BLADE
• Tests circuit current up to 30Amps • Design allows for easy connection into fuse sockets
SAVE $50
39
$
SP61015
COMPUTER-SAFE CIRCUIT TESTER • Operates from 3-15V • Supplied with 48” ground wire • Safely tests auto circuits and on board computer controlled electrical systems
25
$
SP61020
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT
SP62020
LONG PROBE HEAVY DUTY CIRCUIT TESTER • 6-24V • Extra long insulated probe • wire stretches to 3.6m • handle lights up if circuit is good
REMOTE STARTER SWITCH • One-man operation, suitable for turning the engine over for various diagnostic tasks such as compression testing
59
$
SP61014
WWW.SPTOOLS.COM
29
$
SP61052
SP AUTO SPECIALITY 4PC HOOK & PICK SET • Awl tool, 45° tool, 90° tool & hook tool
2PC HOSE REMOVER PICK SET • Unique tip easily fits between hose & fitting to break stubborn hoses
15
• For use in removing O-rings, seals, etc
4 JAW PICK-UP TOOL 610mm • Flexible shaft • Easy retrieval of small parts • Swivel head • Magnetic
• 150mm (6”) • 300mm (12”) • 460mm (18”)
89
59
$
SP31251
AIR CONDITIONING & FUEL LINE DISCONNECT SET • 5/16”, 3/8”, 1/2”, 5/8”, 3/4” & 7/8”
85
12
$
SP33820
WINDSCREEN COLD KNIFE • Aluminium Handle • Heavy Duty Steel Knife
SP64050
UNIVERSAL LIFT SUPPORT CLAMP
37
SP31605
EXHAUST PIPE & TUBING CUTTER • Designed for cutting thin walled steel and copper tubing.
• Suitable for cutting exhaust pipe with diameters from Ø20-75mm
You can now simply purchase your SP products online at sptools.com & pick them up from your local SP Destination Store.
75
$
SP30920
• Great parts storage • Magnetic based stainless steel tray holds itself and contents in any position avoiding loss of parts
25
$
SP30829
.95
MAGNETIC PARTS TRAY
• Supports & locks onto gas strut shafts to enable worn gas struts to be fixed in the extended position
$
9
$
.95
SP31410
$
SP30839
• Suitable for the removal & installation of various sizes of studs • Use with 1/2”sq drive ratchet wrench • Capacity: 10-19mm (3/8”-3/4”)
9
SP31506
$
STUD REMOVAL & INSTALLATION TOOL
• Magnetic pick up 2.3kg
$
$
3PC ROLLING HEAD PRY BAR SET
SP30806
TELESCOPIC INSPECTION FLEXIBLE MAGNETIC MIRROR WITH TWO PICK UP TOOL WITH LED LIGHTS FLASHLIGHT & • 65mm x 40mm MIRROR
29
19
16
$
SP30865
• Extends from 290mm to 870mm
SP30808
• 1/4”x8”, 3/8”x12”, 7/16”x18”, 7/16”x24” • Through-handle square shank with capped end
49
$
SP30844
$
THROUGH-HANDLE 4PC PRY BAR SET
• Uses replaceable razor blades • Spare blades included
$
SP30802
GASKET SCRAPER
• 11” Multi-purpose scraper • 9” Cotter pin puller • 8-1/4” Multi-purpose scraper • Radiator hose remover • 8” Scratch awl
19
$
2PC O-RING & HOOK SCRIBE SET
SCRAPER & REMOVER SET
SP64220
25
$ DIMENSIONS: 140mm x 241mm
SP30911
SHOP ONLINE OR ON YOUR SMART PHONE
13
SP ENGINE TOOLS CYLINDER LEAK DETECTOR & CRANK STOPPER
SPTOOLS.COM
• Pinpoints low compression cause ie burnt valves, worn rings etc • Crank stopper locks engine in place to facilitate installation of timing belts & removal of harmonic balance pulleys • Gauges show % of cylinder leakage & cylinder pressure • Suitable for use on any petrol engine with 14 or 18mm spark plugs
ENGINE OIL PRESSURE TESTER
• Adaptors for most vehicles • 610mm flexible hose • Pressure scale: 0-100psi / 0-700kpa
39
$
SAVE $50
SP66069
3 PRONG OIL FILTER WRENCH
OIL FILTER PLIERS
SWIVEL HANDLE OIL FILTER WRENCHES
• Oil filter wrench • 52mm(2-18”) to 127mm(5”)
• Compact design great for confined areas • Suits oil filters 58mm - 95mm • 3/8’’ Drive
149
$
• 90 degree swivel to access filters in confined areas • Dimples on band ensures secure grip
AVAILABLE IN VARIOUS SIZES
19
$
SP66027
25 PC DOUBLE SIDED OFFSET FEELER GAUGE • 005’’-030’’ (0.127-0.762mm) • Marked with equivelent metric/inch sizes • Offset blades 100mm (L) x 13mm(w) with 25mm offset tips
EACH
29
19
$
$
SP64001
SP64008
OIL EVACUATION SYSTEM - 6 LITRE CAPACITY • Fast, no mess fluid removal • Suitable for automotive & industrial applications • Oil extraction: engine, power steering, gear box, automatic transmission etc. • Fluids: brake, coolant, hydraulic, cutting, lubricants • Air operated
39 SP66060
14
SP64031
STRETCH BELT TOOL • Universal installation & removal of stretch fit belts • Easily installs all stretch fit belts
FROM
39
$
SP64025
$
19
$
• Transfers oils/fluids to and from vehicle components such as gearboxes and differentials.
195
• Checks for leaky or defective parts in vacuum systems & mechanical fuel pumps
SIZE 60-73mm 73-86mm 86-95mm 95-110mm 110-125mm 125-140mm
EXTRACTION SYRINGES
$ VACUUM/FUEL PUMP TESTER KIT
MODEL SP64003 SP64004 SP64005 SP64006 SP64007 SP64009
VALVE LAPPERS
MODEL
CAPACITY
PRICE
SP65122
200ml
$
SP65123
1.5L
$
39 79
TWIN HOOK SEAL PULLER
• Small cup diameters 5/8” & 13/16” • Large cup diameters 1-1/8” & 1-3/8”
• Removes oil seal without damage • Two hook sizes to fit most seal applications
17
$
SP66115
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT
89
$
• Allows removal and reuse of stretch fit belts
SP70991
ONE PIECE - MAGNETIC
CRANKSHAFT BOLT REMOVAL TOOL • Use where impact guns won’t fit • Loosens and tightens bolts • Recommended for use with impact sockets • Produces up to 600 ft/lbs of torque to loosen stubborn bolts
29
$
SP66000
WWW.SPTOOLS.COM
139
$
SP70865
SP BATTERY SERVICE GOT THE WINTER BATTERY BLUES?
NEXT GENERATION ULTRA-CAPACITOR JUMP STARTER
COMPACT SIZE 250L x 120w x 50h
• Zero volt minimum start – can charge a completely flat battery. • Optimally designed charging cycle designed for lead acid/ AGM, gel and calcium, starting & deep cycle batteries. • Overcharge protection • Reverse polarity, short circuit, overload & high temp protection
This premium, next generation jump starter utilises ultra-capacitor technology and allows a vehicles at battery (provided it still has more than 5 volts available) to charge the jump starters capacitors and then jump start the vehicle. Simply connect the ultra-capacitor jump starter to the vehicle battery, the jump starter will display the vehicle batteries existing voltage and health status and if necessary can then charge itself from the depleted vehicle battery (or if available from any other vehicles battery), once charged the jump starter is then able to supply a short burst of full power back into the vehicles electrical system, allowing for vehicle start up.
269
$
MORE INFO AT WWW.SPTOOLS.COM
FROM
BATTERY LOAD TESTER
• Test specific gravity of battery fluid
• American style drop tester. Load applied by internal switchgear (non-sparking) • Suitable for 6 & 12 v • Applies load across cells & measures output on meter • Accurate indication of battery voltage, faulty cell and short circuit
SP61002
• Tests all 12V automotive starting batteries • Directly detects bad cells by measuring internal resistance. • Accurately test a battery with low voltage, no need to fully charge before testing.
120
$ SP61060
10 Amp
$
20 Amp
$
199
$
PRICE
199 399
8 STAGE 10AMP SMART MULTI VOLT BATTERY CHARGER
99 $399
$
SP61076
SP61009
BATTERY ANALYSER
SP61082
• 12 volt • 4 Amp
129
16
AMP
5 STAGE - SMART CHARGER
$
$
MODEL SP61085
SP61074
BATTERY FLUID HYDROMETER
• Range: CCA 100-2000
8 STAGE 12V SMART BATTERY CHARGERS
BATTERY TERMINAL SPREADER & REAMER PLIERS
• Sharp serrated teeth spread & clean the terminal
SP61090
REFRACTORMETER HAND-HELD
• Suitable for ethylene & propylene glycol coolants • Ethylene Glycol: -60°C- 0°C • Propylene Glycol: -50°C- 0°C • Battery Fluid: 1.15 – 1.30 specific gravity • Automatic temp. compensation • Easy to read scale
PLUS BONUS
POST & TERMINAL CLEANER ALL FOR
19 $179
$
• Easy cleaing of post & terminals • Stainless steel cleaning brushes
Battery voltage selection • 6, 12 & 24 volt
SP61003B
SP61005
SP BRAKE SERVICE MANUAL BRAKE BLEEDER KIT
• Includes brake fluid reservoir refiller & brake bleed bottle • Allows one man brake bleeding • Automatically refills brake fluid reservoir during brake bleeding
89
BRAKE SPRING WASHER TOOL
• For Removal & replacing brake shoe retaining washers • Head designed to fit most vehicles
$ SP70858
19
3PC 75° OFFSET BRAKE BRAKE FLUID TESTER KIT BLEEDER RING SPANNER • Test for moisture content in brake fluid • LED light indicates percentage SET
INCLUDES STORAGE POUCH
49 99
$
$ SP63004
of water in the brake fluid • SUITABLE FOR: DOT 3, DOT 4 , DOT 5.1, AC Delco DOT 3, Pennzoil DOT 3, Prestone DOT 3, V Motorcraft DOT 3 & Toyota DOT 3.
• Metric & SAE spanners • Flat drive technology • Sizes included: 8x10mm, 9x11mm & 3/8x7/16”
SP10423
You can now simply purchase your SP products online at sptools.com & pick them up from your local SP Destination Store.
$
SP63028
SHOP ONLINE OR ON YOUR SMART PHONE
15
SP CUTTING BOXFRAME HACKSAW
FOLDING LOCK BACK UTILITY KNIFE
• 12” Alloy • Soft grip handles
FOLDING POCKET KNIFE
SP35100
19
19
29
$
$
.95 SP30850
• Forged chrome molybdenum steel blades • 300mm (12”)
• 420 stainless steel • Straight edge • Thumb stud • 213mm
• Folding lock-back • Lightweight & durable • Quick blade change • Includes 8 spare blades
$
HEAVY DUTY LONG SNIPS
SP30856
25
$ SP32260
SP STRIKING TOOLS BALL PEIN HAMMERS - ONE PIECE
SOFT/HARD HEAD HAMMERS
FROM
39
$
ALUMINIUM/ COPPER HEAD HAMMERS
FROM
FROM
39
$
• Fibreglass handle • Replacement heads available
MODEL
SIZE
PRICE
MODEL
SIZE
SP30185
16oz
$
35mm
$
SP30186
24oz
$
SP30416
40mm
$
SP30187
32oz
39 44 $ 49
SP30406 SP30426
50mm
SLEDGE HAMMERS
69
$
• Fibreglass handle • Replacement heads available
PRICE
MODEL
SIZE
39 55 $ 79
SP30407
35mm
SP30417
40mm
SP30427
50mm
.95
FROM
49
$
• Fibreglass handle
PRICE
MODEL
SIZE
PRICE
$
69 79 $ 95
SP30372
8lb
$
SP30374
10lb
SP30376
12lb
49 59 $ 69 $ $
SP PUNCHES & CHISELS 4PC CENTRE PUNCH SET • 3x8x100mm • 4x10x120mm • 5x12x150mm • 6x16x150mm • Chrome molybdenum
22
10PC PIN PUNCH & COLD CHISEL SET
$
SP30931
7PC PIN PUNCH SET
79
59
$ • Pin Punches: 2 to 8 & 10mm • Chisels: 12, 20 & 24mm
SP30841
5PC COLD CHISEL SET
79
$ • 2, 3, 4, 5, 6, 8 & 10mm
SP30831
$ • 12, 16, 20, 24 & 29mm
SP30821
SP BURRS & DRILL BITS 5PC BURR SETS • Tungsten carbide burrs • Ideal for shaping, smoothing & material removal
HSS DRILL BIT SETS
3PC STEP DRILL BITS SETS
99
$
EACH
• Made from high quality HSS steel • Titanium coated to reduce friction and heat • Drills perfectly round holes in steel, brass, plastic, wood etc.
• Made from high quality HSS steel • Titanium coated to reduce friction and heat • Drills perfectly round holes in steel, brass, plastic, wood etc.
89
FROM
$
49
$
EACH Steel
P/N: SP31380
16
Aluminium P/N: SP31385
MODEL
TYPE
SIZE
MODEL
TYPE
SIZE
SP31398
Metric
• 6-30mm, 4-20mm & 4-12mm
SP31390
Metric 19pc
• 1 to 10mm
$
SP31399
SAE
• 3/16”- 1/2”, 1/4”-3/4” & 1/8”-1/2”
SP31391
Metric 25pc
• 1 to 13mm
$
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT
WWW.SPTOOLS.COM
PRICE
49 99
SP INSPECTION & PICK-UP TOOLS TELESCOPIC MAGNETIC PEN PICK-UP TOOL WITH CLEANING NEEDLE
TELESCOPIC ROUND INSPECTION MIRRORS • Strong & lightweight Stainless steel shafts • PVC comfortable cushion handle
• 1kg Magnetic pen pick-up • Extends 130 – 620mm
9
SP31507
CLEANING NEEDLE
FROM
17
$
SWIVEL HEAD ON ALL MODELS
$
TELESCOPIC MAGNETIC PICK-UP TOOLS • Strong & lightweight stainless steel shaft • PVC comfortable cushion handle
FROM
20
$
MODEL
KG
LENGTH
MODEL
MIRROR
LENGTH
PRICE
SP31502
1Kg Pick-up
Extends 185 - 840mm
$
SP31401
32mm Dia.
Extends 203 - 889mm
SP31503
2.3Kg Pick-up
Extends 180 - 800mm
$
SP31402
57mm Dia.
Extends 250 - 930mm
SP31512
4.5Kg Pick-up
Extends 190 - 760mm
SP31403
82mm Dia.
Extends 280 - 800mm
17 $ 19 $ 19
SP31513
6.8Kg Pick-up
Extends 190 - 760mm
$
PRICE
20 22 $ 24 $ 29
SP LUBRICATION QUICK-RELEASE GREASE COUPLER
VARIABLE STROKE DOUBLE ACTION FLUID PISTOL GRIP TRANSFER PUMP GREASE GUN • Perfect for (450CC) transmissions, gear • 225mm (9”) flexible extension • Uses standard 450cc grease cartridge • Max pressure: 8000PSI
• Designed for use with air, battery & hand grease guns • Heavy-duty construction with stands higher pressure • Four hardend jaws
cases, differentials, lower unit crankcases, etc.
• 39 Inch / 100cm flexible hose • 500ml capacity
99 $39
• Pressure: 10,000psi
$ SP65107
Heavy Duty
74(L) x 30mm Dia.
35
• Ideal for topping up difficult to access oiling points on motor vehicles, lawn mowers, chain saws, outboard & two stroke motors as well as other odd jobs around the workshop and home.
$
SP65136
SP65121
MULTIPURPOSE PUMP - 1 LITRE
29
$ SP65155
SP PANEL & TRIM UNIVERSAL WIPER ARM REMOVAL TOOL
RADIO REMOVAL TOOLS MODEL
SUITS
SP61040
FORD
SP61042
GM
9
SET INCLUDES • U-blade clip remover • Adjustable, • V-blade clip compact & light, remover easy to use
EACH
29
• Prevents damaging wiper arm
28PC TRIM PANEL & SCRAPER SET
24
$
$ • Makes radio removal fast & damage free
2PC DOOR UPHOLSTERY CLIP REMOVER SET
$
SP67042
SP30863
99
$ The most versatile body/interior tool set available NON MARRING POLYMER CONSTRUCTION
SP30877
SP BIT SETS & APADTORS 8PC RATCHET DRIVER 2-IN-1SOCKET TO BIT ADAPTERS 67PC 1/4”DR POWER Swap between using sockets and bits quickly and easily BIT SET BIT SET
30PC BIT SET
• Designed for automotive and machinery work • 3 x phillips bits • 2 x slotted bits • 2 x TORX bits • METRIC 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 6.5 & 7mm • SAE 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32 & 1/4” • TORX T8, T10, T15, T20, T25, T27, T30, T35, T40 & T45
18
B
19
$ SP39608
• Includes hexagon, phillips, pozidrive, square slotted, spanner, torx star, tamper torx, torx plus, spline bits and holder bits
SOCKET ADAPTER
20°
BIT ADAPTER
$
SP39609
A
• Simply slide the adapter to change between 1/4” Sq. Dr & 1/4” Hex
SLIDE
A B
MODEL
TYPE
PRICE
SP39515
2-in-1 socket/bit adapter
15 $ 29
SP39518 Universal 2-in-1 socket/bit adapter
You can now simply purchase your SP products online at sptools.com & pick them up from your local SP Destination Store.
69
$
$
SP39510
SHOP ONLINE OR ON YOUR SMART PHONE
17
SP WORKSHOP 1000kg LOAD CAPACITY
SPTOOLS.COM PROFESSIONAL SERVICE TROLLEY 3 SHELF 870w x 475d x 848h
770
$
• Solid steel frame • Adjustable middle tray drop down for more tray space • 2x Fixed & 2x lockable swivel heavy duty castors • 150kg load capacity
SP40400
199
HEAVY DUTY STEEL WORKSHOP BENCH
$ SP40019
PROFESSIONAL ENGINE TEAR DOWN BENCH
• Combination stainless • 3 x Lockable drawers steel/rubber work top • Can be bolted to floor DIMENSIONS: 2000w x 645d x 872h
PROTECTIVE MECHANICS SEAT COVER • Heavy duty nylon • Easy slip-on design
(1200w x 640d x 812h) • Load capacity: 260kg • Fluid receiver: 5lt
595
• Pneumatic seat adjusts from 420mm to 533mm • Reinforced steel base/storage tray • 5 heavy duty swivel castors • Soft cushioned
29 149
$
SP40415
HEAVY DUTY SWIVEL STOOL
$
$ • Comes with castors for mobility • Can be bolted to floor
SPR-11
SPR-55
* Tools not included
PRESSURE WASHERS A
B
C
D
F
ELECTRIC PRESSURE WASHERS A DOMESTIC • 1740 max PSI • 6.5 Litres per minute • 1400W INCLUDES: • Trigger • Variable spray nozzle lance • Turbo nozzle lance • Extension lance • 5m HP hose with quick connect
149
$
AR120
18
C HEAVY DUTY • 2030 max PSI • 7.3 Litres per minute • 2000W INCLUDES: • Trigger • Turbo nozzle lance • Variable spray nozzle lance • Rotary brush • 8m HP hose with quick connect
395
$
SP140
E
PETROL POWERED D HEAVY DUTY • 2320 max PSI • 7.3 Litres per minute • 2200W INCLUDES: • Trigger • Turbo nozzle lance • Var. spray nozzle lance • Patio cleaner & rotary brush • 10m HP double steel braided hose with storage reel
595
$
SP160RLW
E DOMESTIC • 2500 max PSI • 7.7 Litres per minute • 5.5Hp • Brass head 3 axial piston pump INCLUDES: • Steel lance • 5 Quick connect nozzles • 8m nylon braided hose with quick connect
595
$
SP250P
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT
F HEAVY DUTY • 3600 max PSI • 11.3 Litres per minute • 6.5Hp • Brass head 3 axial piston pump INCLUDES: • Steel lance • 5 Quick connect nozzles • 10m nylon braided hose with quick connect
879
$
SP360P
WWW.SPTOOLS.COM
F COMMERCIAL • 4000 max PSI • 23.4 Litres per minute • 15Hp • Brass head 3 piston crank shaft pump INCLUDES: • Steel lance • 5 Quick connect nozzles • 10m double steel braided hose with quick connect
1495
$
SP400P
SP STORAGE SOLUTIONS MAGNETIC HOLDERS
10 DRAWER TECH SERIES ROLLER CABINET TOOL BOX WITH CUPBOARD
SCREWDRIVER HOLDER • Tool tray with 6x screwdriver holder
19
$
SP30907
1995
$
SPRAY CAN • Holds 3x spray cans and 7x screwdrivers
22
EACH
$
SP30908
AVAILABLE IN VARIOUS COLOUR OPTIONS
4 DRAWER STEEL DIAGNOSTIC TROLLEY AVAILABLE ON
DIAGNOSTIC TOOL STORAGE COMPARTMENT
SP40091 Black SP40092 Green/Dark Green SP40093 Orange/Black
• Stainless steel top • Full drawer extension capabilities • Heavy duty 28 ball bearing drawer slides • Internal locking system • Double powder coating resists scratching
CUSTOM SERIES POWER TOOL CABINET
HEAVY DUTY STORAGE CASES • Ideal for storing & carrying larger tools as well as organising small parts & accessories, such as nuts, bolts etc
EASILY FITS TO AND HANGS OFF THE SIDE OF SP CUSOM SERIES ROLLER CABINETS
299
$
• 2 Drawers - 265w x 410d x 49h • 1 Drawer - 265w x 410d x 78h • Capacity - Small Drawers 10kg • Capacity - Large Drawer 15kg
SP40015
299
$
DIMENSIONS: 964w x 414d x 964h • Internal locking system for extra security • Heavy duty 28 ball bearing drawer slides • Double powder coating resists scratching • Full drawer extension capabilities • 4x swivel (2x lockable) heavy duty castors
DIMENSIONS: 368w x 460d x 750h
WATERPROOF STORAGE CASE • Customisable foam insert to suit your tools • Extreme heavy duty • Ultra-high impact resistant • Strong & lightweight • Lockable
99
$ DIMENSIONS: 502w x 400d x 188h
SP40133
SP40380
PARTS ORGANISERS - 3 PACK PERFECT FOR STORING & ORGANISING YOUR BOLTS, NUTS, NAILS, SCREWS & MORE
FROM
69
$ MODEL SP40378 SP40379
SIZE
DIMENSIONS
PRICE
Medium 565mm x 315mm x 123mm Large
565mm x 315mm x 246mm
69 75
$
$
SP OPEN MOUTH TOOL BAG DIMENSIONS: 580w x 540d x 380h • 1 tool pouch, 9 tool pockets & 5 velcro pockets • 1 zippered + 8 tool pockets
390 x 305 x 62mm 330 x 250 x 53mm 243x x180 x 40mm
• The organisers feature a transparent lid that allows for the contents to be viewed easily • Constructed of durable plastic
39
$
SP40375
69
$
SP40360
OWN QUALITY TOOLS AND EQUIPMENT TODAY AND PAY THEM OFF WEEKLY! SP EASY CREDIT CAN HELP YOU FINANCE YOUR S P TOOLS PURCHASE OVER THE COMBINED VALUE OF $1500 AND REPAYMENTS START FROM AS LITTLE AS $14 PER WEEK*.
APPLY NOW AT SPTOOLS.COM
19
A DIVISION OF AIR TOOLS KIT
SCREWDRIVERS NEW
AIR ACCESSORY KIT - 5PC
• Fully magnetized blade & tips • Soft grip handles for added comfort • Chrome Vanadium steel blades
KIT INCLUDES: • Spray gun • Washing gun
59
$
Screwdriver Set - 22PC Screwdriver Set - 20PC • Tyre inflator • Air duster • Recoil hose
SX-005K
AC 1000v IEC 60900
SPRAY GUNS TOUCH UP GUN
ENGINE CLEANER WITH POT • 800cc capacity • 85psi rated pressure • 115psi max pressure • Adjustable connector • Nitto style fitting included
• 0.25lt pot • 50psi • 1.6mm nozzle
$39
$29
SX-30
• 6x Slotted • 6x Phillips • 6x Mini • 4x Tang Thru
SX-10
T834025
DIE GRINDER • 1/4” 22,000rpm die grinder • 5pc 1/4” shank grinding stones • 1/8” collet • 5pc 1/8” shank grinding stones • Air fitting
$
$
SX-200K
T834030
139 89
Socket Set
T820300
1/2” DR RATCHET WRENCH
RIVETER 3/16” CAPACITY PISTOL TYPE POP RIVETER
• 160rpm • 60ft/lbs torque • Revisable • Front exhaust
$
• 4.8mm (3/16”) max capacity • 90psi • Weight 1.64kg
$59 SX-330
INFLATOR
$139
T820199
TAR-40
BLOW GUN
AUTO STYLE TYRE INFLATOR
AIR BLOW GUN
• Nozzle Length: 110mm • Nitto style air fitting included
& 2” UP TO 50mm
$25 S-880
1/2” Drive 39 PIECE
• METRIC: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30 & 32mm • SAE: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16 & 1-1/4” • ACCESSORIES: Ratchet, flex handle, universal joint, 125mm & 250mm extension bars & 5/8” & 13/16” spark plug sockets
1/4” & 3/8” Drive 55 PIECE
• METRIC: 1/4”Dr - 6 to 12mm 3/8“Dr - 8, 10 to 19mm • SAE: 1/4”Dr - 7/32 to 1/2” 3/8“Dr - 3/8, to 3/4” • ACCESSORIES: Ratchet, 125mm extension bar, spinner handle, coupler, adapters & 18pc bits
$199 O B M U J
• Easy to read dial gauge • Quality hose and fittings
9
$
.95 S-700
79
LIFETIME WARRANTY
Socket Set
ALL HOUSED IN A STURDY BLOW MOLD CASE
RATCHET WRENCH
20
89
$
SOCKET SETS
1/4” COLLET DIE GRINDER KIT
49
$
• 6x Slotted • 6x Phillips • 8x VDE Insulated
T820400
Socket Set 3/4” Drive 27 PIECE
• METRIC: 22, 24, 27, 30, 32, 36, 38, 41, 46 & 50mm • SAE: 7/8, 15/16, 1, 1-1/8, 1-3/16, 1-5/16, 1-3/8, 1-7/16, 1-5/8, 1-3/4, 1-7/8 & 2” • ACCESSORIES: 20’’ ratchet & 18” sliding ”T” bar, 8 & 4” extension bars
A DIVISION OF Roller Seat 3 Drawer
Can Holders STRAP WRENCH with • Heavy duty frame • High density foam padded seat Nylon Strap • Ball bearing slide drawers • Easy access spray can holder Filter Wrench • 3x Can holder slots
TESTER Pocket Circuit Tester 6-24v
DIMENSIONS: • Unit: 370 x 400 x 367mm
• Tests 6-24v systems
$
• Tough non-slip nylon strap • Suits spin-on type filters up to 150mm (6”) dia.
9
$
.95
T861010
• Turn with 1/2” ratchet, angle or power bar • Strap width: 50mm
9
$
.95
99
T8R58
T864010
HEX KEY SETS - LONG JUMBO SPANNER SETS COLOUR CODED HEX KEY SETS - Long Series JUMBO Spanner Available in Metric, SAE, Torx & Tamperproof Torx Sets - Combination • Long series
$
• Chrome plated • Powder coated • Hardened CR-V steel
25
10 PIECE
• METRIC: 24, 27, 30, 32, 36, 38, 42, 44, 46 & 50mm P/N: T810020
EACH
Tamperproof Torx: Torx: SAE: Metric: • 1.5, 2, 2.5, • 1/16, 5/16, 3/32, • T10, T15, T20, T25, • T10, T15, T20, T25, T27, T30, T40, T45 T27, T30, T40, T45 1/8, 5/32, 3/16, 3, 4, 5, 6, 8 & T50 & T50 1/4, 5/16 & 3/8” & 10mm
SCREWDRIVERS Screwdriver Set 13 PIECE
MODEL
SIZE
T834511
9pc Metric
T834512
9pc SAE
T834517
9Pc Torx
$
10 PIECE
T834518 9pc Tamper proof Torx
• SAE: 15/16, 1, 1-1/16, 1-1/4, 1-7/16, 1-1/2, 1-11/16, 1-3/4, 1-13/16 & 2’’ P/N: T810070
EACH
LIGHTING
FUNNELS Funnel Set 4 Piece
Combination LED Worklight & Flashlight Extendable 2-in-1
• 90° Adjustable head LED torch • Extendable 10 LED worklight • Magnetic base • Over 100 Lumens
$ • 8x Slotted • 5x Phillips
19
$
T834000
BRAKES Brake Disc Spreader • Easily installs brake pads on most domestic and imported cars and light trucks.
Batteries Included
KNIVES Knife Set Fixed & Folding FIXED KNIFE • Blade: 123mm Includes: Nylon pouch
$
9
.95
T863002
• 80mm • 100mm • 120mm • 140mm
SLIDE
29
.95 $
29
T830860
4
.95
T864100
T881443
TRIM TOOLS BRUSHES Trim Removal Set Mini Brush Set
6 PIECE
• Non-marring polymer. • Removes door panels, trim strips, dashboard, inrterior, window mouldings etc.
FOLDING KNIFE • Blade: 90mm
$
199
$
9
888 SERIES - PROFESSIONAL QUALITY
.95
T830867
6 PIECE
• 2x Nylon brushes • 2x Brass brushes • 2x Steel brushes
$
4
.95
T830807
21
TOOLS FOR THE TRADE 3PC LONG HANDLE PLIER SET
SPTOOLS.COM
• Straight, 45º & 90º bent long handle pliers • 275mm Long
T-HANDLE HEX KEY SETS AVAILABLE IN METRIC, SAE & TORX
8PC METRIC
99
$
• 2, 2.5, 3, 4, 5, 6, 8 & 10mm P/N: SP34705
8PC TORX
• T8, T10, T15, T20, T25, T30, T40 & T50 P/N: SP34708
SP32905
SETS ARE COLOUR CODED FOR EASY IDENTIFICATION
8PC SAE
• 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16 & 3/8” P/N: SP34706
99
$
EACH
MICROMETER TORQUE WRENCHES REVERSIBLE RATCHET HEAD
FROM
129
$
MODEL
DRIVE
RANGE
LENGTH PRICE
SP35152
1/4”
5-25Nm
323mm
SP35252
3/8”
20-100Nm
400mm
SP35352
1/2”
40-200Nm
517mm
SP35353
1/2”
60-340N-m
517mm
129 $ 139 $ 149 $ 175
• Click type signal alerts user when the required Torque is reached. • Reversible ratchet (clock wise torque only). • Scale adjuster: Accurate & easy adjustment. Adjuster lock will hold required setting during use.
CUT Right Cut Centre Cut Left Cut
END NIPPERS • 200mm (8”)
P/N: SP32269
25
$
EACH
22
• 406mm (16”) • 559mm (22”)
SP30870
PVC HOSE CUTTERS • 42mm Capacity
59 19 $
$
SP70801
SP63043
32PC METRIC TAP & DIE SET
• For use on front wheel adjusting nuts • 1/2” drive
• 250mm (10”)
P/N: SP32268
99
HUBNUT SOCKETS
TOWER PINCERS
SIZES INCLUDE:
$
• High pressure- high flow • Multi purpose cleaning gun • Quick efficient high pressure cooling system flushing • Multi-step nozzle suits most radiator and heater hose
EACH
MODEL
• Adjustable head up to 15 locking positions • Indexable to over 180° allowing more leverage in tight access applications. • Heavy duty chrome vanadium steel
COOLING SYSTEM FLUSHING GUN
SAVE 25%
SP32261 SP32262 SP32263
199
$
2PC INDEXING JAW PRY BAR SET
• Easy readable scale Convex lens enlarges well defined, bold scale numbering. (N-m scale only)
• Forged chrome molybdenum blades for increased strength & durability • High leverage • 250mm (10”)
15
• External & Internal 2 & 3 jaw pullers, grip wrench adaptor, lip puller, hub puller & dent puller • 2.5kg slide hammer with 570mm shaft
SP67048
$
HEAVY DUTY AVIATION SNIPS
$
SLIDE HAMMER PULLER KIT
• Designed specifically for the automotive mechanic. • Covers 6-18mm with common thread pitch sizes. • EVA Foam in a blow moulded case.
54mm (NISSAN)
• Suits most popular 4 wheel drive hub nuts, eg. Nissan • 54mm 6pt Hex
P/N: SP67254
55mm (Toyota) • Suits most popular 4 wheel drive hub nuts, eg. Toyota • 55mm 6pt Hex
P/N: SP67255
45
159
$
$
EACH
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT
SP31100
WWW.SPTOOLS.COM
SP PLIERS • Chrome vanadium steel • Induction hardened cutting edges • Insulated grip handles – 1000V VDE • Ergonomical and comfortable handles featuring slip guards for added safety
99
HIGH LEVERAGE CABLE CUTTERS
ADJUSTABLE MULTIGRIPS 300mm
VDE 3PC INSULATED PLIER SET - 200mm
• 200mm
PLUS BONUS 200mm
49
$
39
$
$ SET INCLUDES: • High leverage long nose pliers, combination pliers & diagonal cutters
SP32909
200mm
SP32403LE
BONUS VALUED AT $29
SP32258
SP PULLERS 14PC GEAR PULLER & BEARING SPLITTER SET
PULLEY PULLER
BEARING SEPARATORS
• Removes gears, bearings, pulleys, harmonic balancer, steering wheels etc • Separates ball bearings
99
$
SP67050
• For removing alternator & power steering pulleys
• Designed to remove bearings & gears where access is available behind the item • Drop forged hardened alloy steel
MODEL
SIZE
SP67062
30-50mm
$
SP67063
50-75mm
$
SP67064
75-105mm
29
$
PRICE
39 59 $ 79
SP67035
SP THREAD & STUD REPAIR 5PC SCREW EXTRACTOR SET
5PC STUD REMOVER SET
• Remove broken studs, screws, bolts etc
• 4x Stud extractors and a go-thru ratchet spanner • Short, for tight restricted areas • Size: 6, 8, 10, 12 sockets plus 14mm &17mm go-thru ratchet
29
89
$ • 1/8”, 3/16”,15/64”, 5/16” & 3/8” • Tapered spline
$
SP31302
SP31253
INTERNAL & EXTERNAL THREAD FILES
49
$
EACH
Includes • Restores damaged threads Slide-On PVC Grip • Files both left and right hand threads
MODEL TYPE
SIZES
SP31305 Metric SP31306 SAE
0.80, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50 & 3.00mm 11, 12, 13, 14, 15, 18, 20 & 24 TPI
SP MEASURING METRIC/SAE DIGITAL VERNIER CALIPERS • Power on/off • Graduation 0.01mm/0.0005” • Hardened stainless steel
FROM
99
$ MODEL
SIZE
PRICE
99 129
SP35631
150mm/6”
$
SP35632
200mm/8”
$
DISC BRAKE DIGITAL CALIPERS
1/2” DR ANGULAR TORQUE GAUGE
• Can be used for all torque-to-yield applications (particularly engine head bolts)
• 0-100/0.4” Disc brake digital calipers • Double point jaw • Power On/Off • Graduation 0.01mm/0.0005”
175
$
SP35649
MEASURING TAPE
• 8m x 25mm
29
$ • 360 Degree scale • Support arm included
You can now simply purchase your SP products online at sptools.com & pick them up from your local SP Destination Store.
SP35360
• Easy to lock & release • 20% Thicker blade
13
$
SP35200
SHOP ONLINE OR ON YOUR SMART PHONE
23
MOBILE SERVICE VAN TOOLS INVERTER GENERATOR
SPTOOLS.COM SP HIGH-FEEL 0.5MM GENERAL PURPOSE GLOVES
SELF ADJUSTING MULTIGRIPS 250MM (10”)
High Feel 0.5mm synthetic leather palm forms to to your hand to allow for more feel
39
$
$
PER PAIR
SP INVERTER GENERATORS meet EPA, Proposed Australian Emissions & strict Californian pollution standards
• Self-adjusting jaws adjust automatically
SIZE
SP68810 Large SP68811 X-Large
35
• Max 3300w, rated 3000w • Low running noise: 50dB(A) • 10 Litre fuel tank • Electric start • KVA: 3.3Kva • Parallel connection capable
• Increased torque
Touch Screen Compatible Index finger
MODEL
7HP INVERTER GENERATOR
1795
$
SPGi3300E
SP32425 CLAMP STYLES
FLEXI HOSE CLAMP PLIER • Fitted with 630mm long cable • For clamp dia. from 18mm to 50mm (approx)
89
“4 IN 1” BRAKE PAD SPREADER
18PC 3/8” OIL DRAIN PLUG KEY SET
• The one tool for both fixed and floating calipers • Prevents damage to pistons, hubs or calipers
• Helps remove & replace drain plugs in hard to reach locations on diffs, gearboxes & engine sumps.
199
$
$
SP72604
• Ensures parallel piston retraction on dual and quad piston calipers
99
$
SP70915
SP20215
HEAVY MACHINERY SERVICE TOOLS 8PC METRIC 15º OFFSET REVERSIBLE GEARDRIVE SPANNER SET JUMBO SIZES
MAGNETIC BALL DRIVE HEX KEY JUMBO SETS AVAILABLE IN METRIC & SAE
8PC 3/4” DR 6PT METRIC DEEP IMPACT SOCKET SET 6 Point
13PC METRIC • 2, 2.5, 3, 4, 5, 6, 7, 8, 10, 12, 14, 17 & 19mm P/N: SP34526
249
$ SIZES INCLUDED: 20, 21, 22, 24, 26, 27, 30 & 32mm
SP10118
GEARDRIVE ON RING END
13PC SAE
• 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 1/2, 9/16, 5/8 & 3/4’’ P/N: SP34527
3/4” DR RATCHET • 24 Teeth Ratchet • LENGTH: 500mm
99
$
EACH
• 24, 27, 30, 32, 34, 36, 41 & 46mm Deep Impact Sockets • Chrome molybdenum steel for maximum strength • Manufactured to din standards
SP20420
3/4” DR FLEX HANDLE
149
$
• Chrome Vanadium steel • LENGTH: 475mm
SP24305
24
249
$
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT
125
$
SP24310
WWW.SPTOOLS.COM
SP SCREWDRIVERS ELECTRICAL SCREWDRIVER SET IN X-CASE - 8PC
TORX 13PC IMPACT DRIVER SET SCREWDRIVER SET IN X-CASE - 8PC
• T8, T10, T15, T20, T25, T27, T30 & T40
• 4x slotted • 4x phillips
1000V
79
79
$
$
SP34042
SP34050
49
$
• Impact driver • 4 x slotted bits • 4 x phillips bits • 4 x inhex bits
SP34030
SP RIVETERS 2 JAW COMPACT HAND RIVETER • Lever type
NUTSERT GUN • Sets 3, 4, 5 & 6mm rivet nuts • Easy change mandrels • 250mm
• Sets 2.4, 3.2, 4.0 & 4.8mm rivets (3/32”, 1/8”, 5/32” & 3/16”)
29
$
59
.95
SP69022
3 JAW SHORT ARM RIVETER
• Lever type • Sets 3.2, 4.0 & 4.8mm rivets • Attached collection bottle
59
3 JAW LAZY-TONG RIVETER • Sets 3.2, 4.0, 4.8, 6.0 & 6.4mm rivets on aluminium, steel & stainless steel • Slim design
69
$
$
$
SP69010
SP69032
SP69040
DESIGNED FOR HEAVY DUTY INDUSTRIAL USE
SP HEX KEYS 9PC KEY SETS BLACK
3PC MAGDRIVE FOLDING HEX KEY SET SET INCLUDES: • 9pc Metric • 8pc SAE • 7pc Torx
29
$
37PC 3/8” & 1/2” DR PROFESSIONAL BIT SET • 6 x hexagon 300mm(L) bits • 10 x ribe 300mm(L) bits • 6 x spline 300mm(L) bits • Extension bit holder • Adaptor • 12 x torx 300mm(L) bits
AVAILABLE IN METRIC, SAE & TORX
EACH
MODEL
TYPE
SP34501
Metric
• 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10mm
SIZES INCLUDED
SP34502
SAE
• 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, & 3/8”
SP34507
Torx
• T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45 & T-50
79
39
$
$
SP39610
SP34560
SP TOOL BOX EXTRAS SNEAKY PETE - SEAL REMOVAL/INSTALLATION
3 LEG FUEL TANK SENDER SPANNER
• Removes & installs upper rear seals without dropping the crankshaft • Cork screw puller makes it easy to remove the old seal • Spring steel clip grips the seal firmly as it is pulled into position
9
$
.95
SP30819
• 52pc pitch gauge • 0-25 to 6mm • 4 to 62 Pitch
• Used for removal & re-fitting tank sender moulding rings
29
$
SP64067
52PC METRIC/SAE SCREW/THREAD PITCH GAUGE
• Range: 75-160mm diameter • Use with a 24mm spanner or socket
You can now simply purchase your SP products online at sptools.com & pick them up from your local SP Destination Store.
29
$
SP64037
SHOP ONLINE OR ON YOUR SMART PHONE
25
SPTOOLS.COM
• 4.0mm insulated & open barrel • Terminal crimper
25% OFF
AVAILABLE IN 3 DIFFERENT SIZE SETS
MODEL
SIZE
PRICE
SP32931
140mm
SP32932
175mm
SP32933
240mm
79 95 $ 119
MODEL SP20510 SP20515
SP32282
Roller Cabinet Cover 760w x 470d x 1000h
EXTENDABLE LONG PRY BAR • Long pry bar with extendable handle • 570 - 840mm length • 16mm shank • Jimmy end
• Cleans & repairs damaged spark plug threads
30% OFF
14
$
SPR-12
30% OFF
55
$
.95
SP31300
PLUS BONUS 1210 x 600 x 750mm
SP30817
PLUS BONUS 1500 x 600 x 750mm
PRESSURE WASHER
PRESSURE WASHER
ELECTRIC 1740psi
ELECTRIC 1885psi
DOMESTIC AR120 • 1740 max PSI • 6.5 Litres per min. • 1400W Bonus valued at
2 DRAWER UPRIGHT
1195
4 DRAWER UPRIGHT
P/N: SP40335B
15” CONSTRUCTION ADJUSTABLE WRENCH
• No air line or grease gun required • Packs 50-60 bearings without refilling • Transparent cup allows grease level check • Works on bearings up to 90mm O.D
• Tapered handle helps locate & align bolts and rivets • Hammer section to help move stubborn bolts • 400mm (15’’)
30% OFF SELF-CONTAINED
DOMESTIC AR130 • 1885 max PSI • 7.3 Litres per min. • 1800W Bonus valued at
$149
$
BEARING PACKER (CUP STYLE)
SP30888
14/18mm SPARK PLUG HOLE RETHREADER
TOOL BOX COVER
39
• 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8 & 2”
FEATURES • Heavy gauge steel • Powder coating resists scratching • Heavy duty 28 ball bearing drawer slides • Heavy duty gas struts • 4x big grip side carry handles • Weather resistant • Includes water gutters in all drawers
59
SP67024
$
SIZE
9pc Metric 27, 30, 32, 34, 36, 38, 41, 46 & 50mm
$
89
$
40% OFF
INDUSTRIAL DUTY TRUCK BOXES
26
29
EACH
PIECES 9pc SAE
30% OFF
$
$
$
SAVE $100
30% OFF
$
295
1” DR 6PT DEEP JUMBO IMPACT SOCKET SETS
• Set of three forks & two handles • 15/16” Ball-joint separator • 1-1/8” Pitman-arm wedge • 11/16” Tie-rod spreader • 8” manual knurled grip handle • 8” air-tool compatible handle with chuck collar
4.0MM INSULATED & OPEN BARREL TERMINAL CRIMPER
4PC CIRCLIP PLIERS SETS
• Include straight & bent internal, straight & bent external circlip pliers
5PC BALL JOINT EXTRACTOR SET
35% OFF
99
$
SP18093
1495
$295
$
HEAVY DUTY MAGNETIC SOCKET RAILS
P/N: SP40336B
4 IN 1 COMPRESSION TESTER
• Ball bearings hold sockets firmly to rail • Magnetic rail base
• Quick cylinder pressure meter • 2.5’’ gauge with dual scale, 0-300psi, 0-21kg/cm2, 0-300psi.
30% OFF Sockets not included - rail only
MODEL
SIZE
PRICE
SP201RM
1/4” Holds 10pc
SP202RM
3/8” Holds 14pc
SP203RM
1/2” Holds 16pc
14 $ 24 $ 30
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT
$
47
$
SP66023
WWW.SPTOOLS.COM
20% OFF
OIL FILTER WRENCH 74.2mm X 3/8”DR
OIL FILTER WRENCH 64.5mm • Suits Toyota & Lexus 6 & 8 Cylinder Toyota: 2007-2008 V6, Corolla- (2007-2009) 4cyl, Tundra- (2007) 8cyl, Sequoia- (2008) 8cyl, Land Cruiser(2008-2010) 8cyl, 4Runner-(2008-2010)4&6Cyl Lexus: (2006) - All vehicles, (2007) ES350, GS350, GS450h, LS460, RX350, (2008) LS600h L, (2009) LX570 • Size: 14 flutes x 64.5mm x 3/8” dr. • Use torque: 25N-m±5N-m • Chrome finish
• Suits Audi,BMW,Ford,Mazda,Toyota,VW, Porsche, Ford Focus (2004-2006) & Mercedes Benz - V6 & V8 • Size: 14 flutes x 74.2mm x 3/8” dr • Use torque: 25N-m±5N-m • Chrome finish
HALF PRICE
49
$
SP71108
HALF PRICE
PLUS BONUS
Hose Suits Volkswagen
OIL DRAIN HOSE - M32 X 2.0P • Prevents oil from gushing out of the housing when changing oil filters • 900mm long oil-resistant extra-flexible drain hose
Bonus valued at $39
59
$
SP71113
FUEL INJECTION PRESSURE TESTER KIT - JAPANESE CARS
TDC INDICATOR KIT (TOP DEAD CENTRE)
• Suits multi-point system with “Banjo” style hose found on most Japanese cars. • Quick coupling system for speedy & efficient testing connection • Relief valve relieves pressure and fuel safely • No need for wrenches or pipe dope
• A pneumatic indicator for finding top dead centre (TDC) position on petrol and diesel engines • Adaptors for 8mm to 18mm spark plug and glow plug holes • Application: diesel and petrol engines for car and vans
SAVE $100
19
199
$
$
SP71030
SP66063
ENGINE OIL PRESSURE TESTER
• Checks pressure in both cars & trucks. • Tests the switches, sensors, dashboard gauge & indicators linked to the oil pump • Complete with 600mm (24”) of permanenly primed, oil proof, hose with 1/8” NPT and includes 1/4” NPT & 3/8” NPT adaptors • Dual gauge readings: 0~140psi (0~10 Bar)
SAVE $50
139
$
SP66070
PLUS BONUS OIL DRAIN HOSE - M20 X 1.5P • Prevents oil from gushing out of the housing when changing oil filters • 900mm long oil-resistant extra-flexible drain hose
Hose Suits Toyota & Lexus
Bonus valued at $45
CAMSHAFT PULLEY REMOVER/INSTALLATION KIT
• Designed to hold the camshaft pulley stationary while loosening & tightening the centre shaft bolt • Fixed distance 54 - 120mm
HALF PRICE
29
$
70% OFF
SP71065
LIMITED QUANTITY
TIMING GEAR HOLDER • Securely holds the timing gear during removal or installation • Slimline design allows maximum access
60% OFF
DIESEL INJECTOR SOCKET 6PC SET
HALF PRICE
• 90 X 21mm Ford • 80 X 22mm Nissan, VW • 110 X 22mm Audi, BMW, Mercedes, Rover, Seat, Vauxhall, Volvo, VW • 80 X 27mm BMW, Fiat, Ford, Peugeot • 80 X 28mm LGV - Scania, Volvo • 83 X 28mm VM 2.4D/2.5D Engine
49 $69
$
SP70906
STEEL LINE STOPPER KIT
SP66081
DIESEL INJECTOR FLOW TEST KIT
• Use to seal steel lines once disconnected • Prevents fluid leaks and contamination during service
• Designed to measure return fuel flow on diesel vehicles up to 8 cylinders fitted with common rail injection system • Identifies, worn, blocked or inoperative injectors quickly & easily • Supplied with measurement tubes for short term tests and measurement bottles for long term, more accurate evaluation • Adaptor set to suit Delphi & Denso Injectors
HALF PRICE
29
$
40% OFF
SP71100
You can now simply purchase your SP products online at sptools.com & pick them up from your local SP Destination Store.
99
$
SP66068
SHOP ONLINE OR ON YOUR SMART PHONE
27
WWW.SPTOOLS.COM
12V INDUSTRIAL RIVETER • Powerful motor with a max pulling force of 500Kg • Ergonomic soft grip handle for comfortable use • Sets 2.4mm, 3.2mm, 4.0mm & 4.8mm aluminium rivets • Includes 3 interchangeable nozzles • High Capacity: ± 300 rivets on one charge
GENERAL KART
MAINTENANCE TOOL KIT
Includes 1x 2.0Ah Battery + Charger
299
Compact Technicians 5 Tray Cantilever Tool Box
$
SP81371
FOLDING SINGLE BLADE STOCK KNIFE
29
$
SP30855
• Combination spanners • Gear drive spanners • 3/8”Dr sockets + accessories • Pliers & cutters • Snap ring plier set • T-handle hex keys • Screwdrivers • Hammer • Tyre gauge and valve core tool
249
$
INCLUDES
• Stainless steel blade STORAGE • Timber handle • Closed length: 125mm POUCH WITH BELT CLIP • Blade length: 93mm • Overall length: 218mm
41PC 1/2” DR 12PT METRIC/SAE SOCKET SET • 10 to 24, 26, 27, 30 & 32mm • 3/8” to 1-1/4” • 42T Ratchet PLUS BONUS ADJUSTABLE 300mm WRENCH
BONUS VALUED AT $49
199
$
SP52300
NEW
360w x 235d x 280h
LiTHIUM Polymer Battery
LI+ POWER BANK JUMP STARTER 700A INCLUDES ADAPTERS & CONNECTORS
• Jumper cables • USB to various electronic device input connectors • 12V10A DC adapter cable • 12v car charger • Charger • Storage case
199
$
SP20300LE
SP61071
12V CAULKING GUN
199
$
SP81362
• Uses standard 400ml cartridges • Patented dripless mechanism • Includes 2x 1.5Ah Li-Ion batteries & charger • Packed in a Blow Mold Protective Case
Dimensions: 181L x 95w x 40h (mm)
Locking Plier Set 16 PIECE
INCLUDEDS Curved Jaw Locking Pliers Curved Jaw Locking Pliers Curved Jaw Locking Pliers Locking Welding Clamps C-Type Locking Clamps Long Nose Locking Pliers Long Nose Locking Pliers
SIZE 130mm 180mm 225mm 280mm 280mm 160mm 225mm
QTY
FEATURES: • 12v 250 - 700AMP Jump start (Petrol engines up to 5L V8 & Diesel up to 3L) (approx. double normal laptop battery life) • 12v Port for powering or charging 12v accessories • 5v USB Port for charging mobile phones, tablets & cameras (approx. 4 full mobile phone charges per charge) • Hi power LED flashlight with strobe & SOS flash patterns • Lithium-Ion Battery - Holds charge longer • Built in battery management system • Low voltage warning/low voltage shut down • Reverse polarity indicator and alarm • Short circuit and overload protection for jumper & USB • Built-in over charge/discharge circuit protection
$
129 T832930
2 3 5 2 2 1 1
INCLUDES STORAGE WALLET While Austech Industries makes every reasonable effort to ensure the accuracy and validity of the information provided. Pricing and specifications are continually changing, Austech Industries reserves the right to change at any time without notice, the information contained in our Trade Catalogues, Promotional Brochures, Catalogues and alll such print media, and makes no warranties or representations as to its accuracy. All prices include GST. Not all products in this brochure are available from all outlets. Prices may vary in some country areas due to freight costs. All products in this brochure were available at the time of printing. Austech Industries will do everything possible within reason, to maintain stocks of products advertised but cannot be responsible for unforeseen shortfalls beyond their control. E & O Copyright. WWW.SPTOOLS.COM Please note: Images are for illustration purposes only, contents and colours may vary.