400 SERIES 200 SERIES
2015-16 PRODUCT GUIDE FOR PROFESSIONALS
MORE WAYS TO MAKE
CUSTOMER SATISFACTION HAPPEN.
MORE REPLACEMENT SOLUTIONS. From insert double-hungs to flangeless casements to custom-size bay windows and patio doors, Andersen has the answer to any replacement problem. Pages 6-7
400 SERIES FRENCHWOOD® GLIDING PATIO DOOR
400 SERIES WOODWRIGHT® DOUBLE-HUNG INSERT WINDOW
400 SERIES TILT-WASH DOUBLE-HUNG INSERT WINDOW
Andersen® 400 Series windows have been named a Best Buy for replacement windows by Consumers Digest. Criteria for the award included performance ratings, quality of construction and materials, ease of operation and warranty. For more information, visit andersenwindows.com/bestbuy.
400 SERIES REPLACEMENT CASEMENT WINDOW
MORE VARIETY.
SEVEN EXTERIOR COLORS
White
Canvas
EXCEPTIONAL EXTERIOR TRIM OPTIONS • ELEVEN COLORS • THREE STYLES • THREE DECORATIVE HEAD OPTIONS • INSTALLS IN ABOUT 5 MINUTES
Pages 8-9
The Best Buy Seal and other licensed materials are registered certification marks and trademarks of Consumers Digest Communications, LLC, used under license. For award information, visit ConsumersDigest.com.
Sandtone
Terratone
Forest Green
Dark Bronze
Black
INCOMPARABLE HARDWARE SELECTION Andersen lets you choose from a broad range of hardware styles and finishes, including a new spoon lock design for double-hung windows and the most extensive hardware collection of any patio door manufacturer.
Pages 12-15
MORE EFFICIENT PRODUCTS. Andersen makes windows and doors with options that achieve ENERGY STAR® 6.0 certification throughout the United States.
OVERVIEW Andersen Advantages ..................................................1 Options & Accessories..................................................8 Products at a Glance ..................................................18
400 SERIES WINDOWS & PATIO DOORS Casement & Awning Windows ....................................31 Replacement Casement & Awning Windows ...............49
MORE VISIBILITY.
Complementary Casement Windows ...........................53 Woodwright® Double-Hung Full-Frame Windows .........59 Woodwright® Double-Hung Insert Windows .................77 Tilt-Wash Double-Hung Full-Frame Windows ..............83 Conversion Kit ............................................................94 Tilt-Wash Double-Hung Insert Windows ......................95 Bay & Bow Windows ................................................101 Gliding Windows ......................................................115
Conventional Insect Screen
Crafted from micro-fine stainless steel mesh, it’s one-third the diameter of our aluminum screen wire.
Specialty Windows ...................................................121 Complementary Specialty Windows ..........................141 Frenchwood® Gliding Patio Doors ............................. 145 Frenchwood® Hinged Patio Doors — Inswing ............ 153 Frenchwood® Hinged Patio Doors — Outswing ......... 163
TRUSCENE INSECT SCREENS ®
TruScene ® insect screens are an exclusive Andersen Innovation. They provide more than 50% greater clarity than our conventional insect screens for beautifully unobstructed vision. Page 16
Frenchwood® Patio Door Sidelights & Transoms ........171 Complementary Curved Top Patio Doors ...................175
SPECIALTY & ENTRY DOORS Folding Outswing Doors............................................185 Entry Doors (residential) ........................................... 191
MORE GREAT OUTDOORS.
Entry Doors (transoms)............................................. 204 Entry Doors (commercial) ......................................... 207
ART GLASS & EXTERIOR TRIM Art Glass .................................................................. 213 Exterior Trim ............................................................215
200 SERIES WINDOWS & PATIO DOORS Tilt-Wash Double-Hung Windows ..............................221 Gliding Windows ......................................................227 Narroline® Gliding Patio Doors ..................................233 Perma-Shield® Gliding Patio Doors ............................241 Hinged Patio Doors — Inswing ................................247
FOLDING OUTSWING DOORS When closed, they form a stately wall of light. When open, they fold virtually out of sight. Choose from configurations up to 48 feet wide.
Page 185
TECHNICAL INFORMATION Combination Designs ...............................................255 Product Performance ...............................................269 Sustainability............................................................286 Installation Accessories ............................................288 Warranty ..................................................................290
Now more than ever, Andersen offers what you need to design, build, remodel and replace. More custom sizes for more products. More service coverage from coast to coast. More tools that add speed and professionalism to how you create plans, generate quotes and specify products. All in addition to the things that have made Andersen an industry leader for over 110 years — including the energy efficiency customers demand, a history of environmental stewardship, the backing of a renowned limited warranty* and the confidence that comes from working with products crafted for the long run.
WHATEVER YOUR PROJECT,
ANDERSEN
DELIVERS *Visit andersenwindows.com/warranty for details.
2
Andersen has both the products and the design tools you need for virtually any project. With a wide range of windows and doors, a variety of interior finishes and a large palette of colors, it’s easy to create the look you want. You’ll also find the tools you need to bring your vision to life. For more information on our design tools, visit andersenwindows.com/arg.
BUILD Andersen is the most trusted window brand among builders. With good reason. Our extensive collection of products offers the ability to deliver aesthetics and reliable performance in any climate. And our vast dealer network is there for you, from project design to closing, with industryleading support and service.
ANDERSEN ADVANTAGES
DESIGN
REMODEL Whether you are matching existing architecture, delivering energy efficiency or fitting budgets your customers demand, Andersen can help. We offer a broad portfolio of products — all renowned for their long-lasting,* energy-efficient, low-maintenance designs. With custom size capabilities, a choice of wood species and exterior colors, and other options and accessories, you have everything you need to create what your customers have in mind.
REPLACE Andersen is committed to being your window and door company for replacement solutions. With Andersen, you have the ability to order custom sizes for a wide variety of full-frame windows, insert windows and patio doors. In addition, we offer a range of interior and exterior options, custom grille capabilities and products that arrive prepped from the factory for easy installation. *Visit andersenwindows.com/warranty for details.
3
The most popular windows and doors from the brand rated by builders and remodelers as the most durable, most weathertight and easiest to install.* They’re also rated the highest in quality.** AndersenŽ 400 Series windows and doors provide a classic blend of engineering and craftsmanship, featuring extensive sizes, shapes, styles and colors. We design each product to meet our demanding standards. And each is available with a full array of options and accessories to give projects a customized look, and customers the choices they want. Carefully crafted in dramatic sizes and shapes, Andersen complementary products can make any project special. They beautifully complement our 400 Series products and expand your design possibilities.
* 2014 Hanley Wood Brand Perception Study. **2015 Hanley Wood BUILDER Brand Use Study.
4
PRODUCT OVERVIEW With Andersen, there are product lines for every budget, every personal taste and every architectural style. No matter which you choose, all feature the beauty, energy efficiency and durability you and your customers have come to expect from Andersen.
ANDERSEN ADVANTAGES
ANDERSEN
速
Specialty & Entry Doors Our folding outswing doors let the outside in. When closed, they provide a stately wall of light. When open, they fold virtually out of sight. Choose from a variety of configurations up to 48 feet wide. Handcrafted from the finest wood available, Andersen速 entranceways add uncommon elegance to any home. Choose from rectangular or arched styles in a large variety of solid wood or glass panel options.
This streamlined selection delivers Andersen quality at an uncommon value while still offering ample choices. The Andersen 200 Series product line concentrates on our most popular sizes and options.
5
REPLACEMENT SOLUTIONS FOR EVERY JOB
Andersen offers the replacement solutions you need, the comfort and low maintenance your customers are looking for and the successful installs your reputation requires. Whether it’s a double-hung insert window, our replacement casement, or a full-frame replacement window or patio door, Andersen® replacement products install quickly and easily so you finish in less time.
SEE THESE PAGES FOR DETAILS ON EACH ANDERSEN® REPLACEMENT AND CUSTOM-SIZE PRODUCT: 400 Series Replacement Casement & Awning Windows ........................... 49 400 Series Woodwright® Double-Hung Full-Frame Windows ..................... 59 400 Series Woodwright® Double-Hung Insert Windows ............................ 77 Narroline® Double-Hung Window Conversion Kits ..................................... 94
What’s more, Andersen replacement windows
400 Series Tilt-Wash Double-Hung Insert Windows .................................. 95
and doors have beautiful wood interiors that add
400 Series Specialty Windows ................................................................ 121
value to your customers’ homes — so you’re not
400 Series Frenchwood® Gliding Patio Doors ......................................... 145
just replacing, you’re upgrading. Plus all feature
400 Series Frenchwood® Hinged Patio Doors ........................................ 153
the durability, the time-tested performance and
Specialty & Entry Doors ......................................................................... 185
the service and support you’ve come to expect
200 Series Narroline® Gliding Patio Doors .............................................. 233
from Andersen. Which means more satisfied
200 Series Perma-Shield® Gliding Patio Doors ....................................... 241
customers today and fewer callbacks tomorrow. 6
ANDERSEN ADVANTAGES 400 SERIES WOODWRIGHT速 DOUBLE-HUNG INSERT WINDOW
400 SERIES TILT-WASH DOUBLE-HUNG INSERT WINDOW
The classic, traditional style of Woodwright速 full-frame windows in a time-saving insert.
Our best-selling double-hung window now comes as an insert for easy replacement.
CUSTOM SIZES
400 SERIES REPLACEMENT CASEMENT WINDOW
CUSTOM SIZES
Available without a nailing flange for easy installation from inside or outside. Features predrilled, through-the-jamb installation holes for quick installation. CUSTOM SIZES
Our replacement casement windows and all insert windows include flat, self-hanging shims, backer rod, installation screws and complete instructions.
CUSTOM-SIZE PATIO DOORS Whether you need a hinged or gliding patio door for replacement, Andersen has a number of custom size options to fit your project. CUSTOM SIZES
7
EXTERIOR TRIM SYSTEM
A BEAUTIFUL, INNOVATIVE WAY TO SAVE TIME Andersen速 exterior trim for windows and doors installs in about five minutes. It allows you to eliminate measuring, cutting, mitering and filling nail holes while providing an exceptional fit and finish. Plus it offers the flexibility to create a variety of window, door and trim color combinations. For details see page 215.
Independent of water management system for easy installation Time-saving and cost-effective
No nail holes, no visible fasteners, no painting
Innovative attachment strip
Our trim is made with Fibrex速 material, an environmentally smart composite that contains 40% pre-consumer reclaimed wood fiber by weight.
Cocoa Bean trim with Sandtone window
Style that gets noticed Our thick trim profiles overlap the window frame to create clean lines without visible sealant joints. Mitered brick mould corners and butt joints on flat trim reflect traditional corner joints.
An online trim visualizer, installation guides and videos are available at andersenwindows.com/exteriortrim.
8
3 1/2" Flat with sill nose Dark Bronze trim with White window
2" Brick Mould with sill nose Dove Gray trim with Terratone window
4 1/2" Flat with sill nose Canvas trim with Forest Green window
HEAD TRIM OPTIONS
Decorative Drip Cap
OPTIONS & ACCESSORIES
STYLES
3 5/8" Cornice
2" Cornice
COLORS WINDOW AND DOOR COLORS*
White
Canvas
Sandtone
Terratone
TRIM COLORS
Forest Green
Dark Bronze
Black
COLOR CHOICES & COMBINATIONS
White
Canvas
Sandtone
Terratone
Forest Green
Dark Bronze
Black
Cocoa Bean
Red Rock
Prairie Grass
Dove Gray
Available in 11 factory-finished colors that never need painting and won’t fade, flake, blister, chalk or peel no matter what the climate.** Mix and match trim and product colors to give your customers the look they want.
* Some products are not available in all colors. See your Andersen supplier for details. ** Visit andersenwindows.com/warranty for details.
Red Rock trim with Sandtone window
Printing limitations prevent exact duplication of colors. See your Andersen supplier for actual color samples.
9
GLASS OPTIONS Andersen has the glass you need to get the performance you want. From SmartSun™ glass
Most Andersen® 400 Series windows are available with impact-resistant glass and structural upgrades to meet the tough building codes of hurricane-prone coastal areas. See your local code official for specific requirements in your area.
with HeatLock™ coating that is ENERGY STAR® certified in all climate zones* to PassiveSun® glass that helps heat homes in northern areas, there’s an option for every climate, project and customer. Check with your supplier for the selections that meet ENERGY STAR® qualifications in your area.
E N E R G Y
GLASS
L I G H T
U- FACTOR
SOLAR HEAT GAIN COEFFICIENT
VISIBLE LIGHT TRANSMITTANCE
UV PROTECTION
How well a product prevents heat from escaping.
How well a product blocks heat caused by sunlight.
How much visible light comes through a product.
How well a product blocks ultraviolet rays.
SmartSun™
Thermal control similar to tinted glass, but with the visible light transmittance of clear glass.
SmartSun with HeatLock™ Coating
Applied to the room-side surface, it reflects heat back into the home and improves U-Factors.
Low-E4®/Low-E
Outstanding overall performance for climates where both heating and cooling costs are a concern.
Low-E4 with HeatLock™ Coating
Applied to the room-side surface, it reflects heat back into the home and improves U-Factors.
Sun
Outstanding thermal control in southern climates where less solar heat gain is desired.
PassiveSun®
Ideal for northern, passive solar construction applications where solar heat gain is desired.
Clear Dual-Pane
High visibility with basic thermal performance. Center of glass performance only. Ratings based on glass options available as of June 2015. Visit andersenwindows.com for ENERGY STAR® map and NFRC total unit performance data.
TIME-SAVING TRANSLUCENT FILM
ADDITIONAL GLASS OPTIONS
We help protect Andersen windows and doors during delivery and construction with a translucent film that minimizes time spent masking on the jobsite, then peels away for a spotless window. For details, contact your Andersen supplier or visit andersenwindows.com.
Tempered safety glass (standard on patio doors).
®
Laminated glass for added strength, enhanced security and sound control. Patterned glass to let in light while obscuring vision (patterns shown below).
Obscure
Reed
Cascade
Cascade and Reed patterns can be ordered with either a vertical or horizontal orientation. * Andersen 400 and 200 Series products only with SmartSun™ glass with HeatLock™ coating (argon gas blend), no grilles, no breather tubes. Excludes patterned/textured glass.
10
Fern
GRILLE OPTIONS With Andersen, you’ll find grille patterns, widths and configurations to fit any architectural style or the taste of any homeowner. If you’re replacing windows and doors, we can match virtually any existing grille. We’ll even work with you and your customers to create custom patterns.
Colonial
Prairie
Simulated Double-Hung Our 2 1/4-inch-wide
Specified Equal Light* Fractional
Diamond
Tall Fractional
2x2
1x4
Specified Equal Light*
Tall Fractional with 2 1/4 " rail
Short Fractional
OPTIONS & ACCESSORIES
Note: Some grille patterns not available in all configurations and products.
Short Fractional with 2 1/4 " rail
Custom Patterns Contact your Andersen supplier for your custom needs.
grille can make a casement window look like a double-hung.
To see all of the standard patterns available for a specific window or door, refer to the detailed sections in this book for each product or contact your Andersen supplier.
GRILLE CONFIGURATIONS Full Divided Light
Simulated Divided Light
Convenient Cleaning Options
For an authentic look, full divided light grilles are permanently applied to the interior and exterior of the window with a spacer between the glass.
Simulated divided light offers permanent grilles on the exterior and interior with no spacer between the glass. We also offer permanent exterior grilles with removable interior grilles in natural wood or prefinished white.
Removable interior grilles come off for easy cleaning. Andersen® Finelight™ grilles are installed between the glass panes and feature a contoured 1" or ¾" profile.
Permanent Exterior Permanent Interior with Spacer
Permanent Exterior Permanent Interior
Permanent Exterior Removable Interior
Removable Interior Grille
Finelight™ GrillesBetween-the-Glass
Grille Widths
(actual size shown) 3/4"
7/8"
1 1/8"
2 1/4"
*Specify number of same-size rectangles across or down.
11
TIMELESS BEAUTY:
WINDOW HARDWARE Window hardware enhances the overall design of a window and harmonizes with a home’s décor. That’s why we offer a broad range of hardware styles and finishes.
A N D ER S EN® H A R D WA R E FINISHES
Antique Brass
Black
Bright Brass
Brushed Chrome
Distressed Bronze
Distressed Nickel Estate™ casement hardware in distressed bronze finish.
Gold Dust
Oil Rubbed Bronze
Polished Chrome
Satin Nickel
Stone
White
Distressed bronze and oil rubbed bronze are “living” finishes that will change with time and use. Printing limitations prevent exact finish replication. See your Andersen supplier for actual finish samples.
12
Estate™ lock & keeper in satin nickel finish.
GLIDING WINDOWS
CASEMENT & AWNING HARDWARE OPTIONS* CLASSIC SERIES™
ESTATE™
For use on 400 Series gliding windows.*
For use on 200 Series gliding windows.
Antique Brass | Black | Bright Brass Brushed Chrome | Distressed Bronze Distressed Nickel | Oil Rubbed Bronze Polished Chrome | Satin Nickel Stone | White
STANDARD: Stone | White OPTIONAL: Antique Brass Black Bright Brass Gold Dust Oil Rubbed Bronze Satin Nickel
Antique Brass | Bright Brass | Brushed Chrome Distressed Bronze | Distressed Nickel | Oil Rubbed Bronze Polished Chrome | Satin Nickel
Stone | White
TRADITIONAL FOLDING
Folding window hardware eliminates interference with window treatments. Antique Brass | Black | Bright Brass Distressed Bronze | Distressed Nickel | Gold Dust Oil Rubbed Bronze | Satin Nickel | Stone | White
Black | Bright Brass | Gold Dust | Oil Rubbed Bronze Satin Nickel | Stone | White
STANDARD DOUBLE-HUNG HARDWARE 400 SERIES WOODWRIGHT® WINDOWS
400 SERIES TILT-WASH WINDOWS
200 SERIES TILT-WASH WINDOWS
Stone | White
STANDARD: Stone | White OPTIONAL: Black | Gold Dust
STANDARD: Stone | White OPTIONAL: Antique Brass | Black | Bright Brass Gold Dust | Oil Rubbed Bronze | Satin Nickel
Hand Lift
Finger Lifts
OPTIONS & ACCESSORIES
CONTEMPORARY FOLDING
OPTIONAL DOUBLE-HUNG HARDWARE* ESTATE™
Lock & Keeper (Not available for 200 Series tilt-wash windows)
Antique Brass | Bright Brass | Brushed Chrome | Distressed Bronze | Distressed Nickel | Oil Rubbed Bronze | Polished Chrome | Satin Nickel
TRADITIONAL
Bar Lift
Hand Lift
Finger Lifts
Antique Brass | Bright Brass | Brushed Chrome | Oil Rubbed Bronze | Polished Chrome | Satin Nickel | Stone | White
CLASSIC SERIES™
Bold name denotes finish shown.
Sash Lift
Hand Lift
Finger Lifts
Stone | White
Stone | White
Stone | White
*All Andersen® hardware is sold separately, except standard hardware.
13
FUNCTIONAL BEAUTY:
DOOR HARDWARE G L I D I N G P A T I O D O O R H A R D W A R E*
H I N G E D P A T I O D O O R H A R D W A R E* YUMA®
ENCINO®
ANVERS®
NEWBURY®
Distressed Bronze Distressed Nickel
Distressed Bronze Distressed Nickel
Bright Brass Oil Rubbed Bronze Satin Nickel
Antique Brass Bright Brass Brushed Chrome Oil Rubbed Bronze Polished Chrome Satin Nickel
*Hardware sold separately.
Anvers® gliding door hardware in satin nickel finish.
Yuma® hinged door hardware in distressed nickel finish.
With Andersen, you have a wider selection of hardware styles and finishes than you’ll find with just about any other manufacturer. We offer six distinctively different hardware styles — Yuma,® Encino,® Anvers,® Newbury,® Covington™ and Whitmore® — in solid forged brass with eight metal finish options. And we offer two hardware styles — Tribeca® and Albany — in die-cast zinc with durable powder-coated finishes. Also, look for additional hardware options such as exterior keyed locks and matching hinge finishes in the detailed sections for each individual door.
OPTIONS & ACCESSORIES
G L I D I N G P A T I O D O O R H A R D W A R E*
H I N G E D P A T I O D O O R H A R D W A R E* COVINGTON™
WHITMORE®
ALBANY
TRIBECA®
Antique Brass Bright Brass Oil Rubbed Bronze
Antique Brass Bright Brass Oil Rubbed Bronze Satin Nickel
Black Gold Dust Stone White
Stone White
Bold name denotes finish shown.
D O O R H A R D WA R E F I N I S H E S
Antique Brass
Black
Bright Brass
Brushed Chrome
Distressed Bronze
Distressed Nickel
Gold Dust
Oil Rubbed Bronze
Polished Chrome
Satin Nickel
Stone
White
Distressed bronze and oil rubbed bronze are “living” finishes that will change with time and use. Bright brass and satin nickel finishes on patio door hardware feature a 10-year limited warranty. Matching hinges available for inswing patio doors. Printing limitations prevent exact finish replication. See your Andersen supplier for actual finish samples. *Hardware sold separately.
15
INSECT SCREENS Exclusive Andersen® TruScene® insect screens provide more than 50% greater clarity than our conventional insect screens for a beautifully unobstructed view. And they let in more fresh air and sunlight, while doing a better job of keeping out small insects.
TruScene® Insect Screen
Stone
White
Crafted from micro-fine stainless steel mesh, it’s one-third the diameter of our aluminum screen wire.
Pine
FRAMES For casement and awning windows, TruScene® insect screen frames are available in stone, white or natural pine veneer that can be stained to match the window. Insect screen frames for all other windows are installed on the exterior of the window and match the unit’s exterior color.
FULL OR HALF WINDOW INSECT SCREENS
TRUSCENE® INSECT SCREENS — 50% GREATER CLARITY
PATIO DOOR INSECT SCREEN OPTIONS All hinged and gliding patio door insect screens have a long-lasting* fiberglass screen mesh with a charcoal finish. Available in colors to match the exterior of the door.** GLIDING PATIO DOORS
Full insect screens are available for Andersen® venting windows. Andersen also offers the option of half insect screens for the lower sash of our tilt-wash double-hung windows.
Gliding Insect Screen Gliding insect screens are available for twoand four-panel doors.
* Visit andersenwindows.com/warranty for details. ** See your Andersen supplier for availability.
16
Conventional Andersen® Insect Screen
Conventional Insect Screen
Retractable Insect Screen The retractable insect screen is installed on the exterior of the door and opens side-toside across the width of the opening. When the insect screen is not in use, it neatly retracts into a small canister. Available for two-panel patio doors.
HINGED — INSWING PATIO DOORS
Hinged Insect Screen Available for single-panel doors.
Double-Hinged Insect Screen Available for two-panel jamb hinged doors.
Gliding Insect Screen Available for all two- and threepanel doors.
HINGED — OUTSWING PATIO DOORS
Retractable Insect Screen The retractable insect screen is installed on the interior of the door across the width of the opening. When the insect screen is not in use, it neatly retracts into small canisters. Retractable insect screens for outswing doors are available with White, Pine, Oak or Maple interiors. Available for single- and two-panel doors.
ART GLASS Andersen offers three distinctly different series of art glass to complement any home’s architecture. All can help you add interest, create focal points and make your work stand out from that of your competitors. For more information, see your Andersen supplier or visit andersenwindows.com/artglass.
Each of the four patterns inspired by renowned architect Frank Lloyd Wright remains true to the principles of Wright’s original work: simplicity, unity and nature.
Eucalyptus
Wichita
Colonnade
Prairie Rhythm
OPTIONS & ACCESSORIES
FRANK LLOYD WRIGHT ® SERIES
CLASSIC SERIES Create a classic look with five different styles that represent major architectural design themes from the late 1800s through the 1930s, as well as a Southwestern-inspired design.
Diamond Lights
Lotus
Regency
Victoria
ARTISAN SERIES Two designs influenced by 20th Century American and European architectural schools feature striking visual patterns that evoke an extraordinary blend of art and nature.
Taos
Harmonics
Affinity
“Frank Lloyd Wright” is a registered trademark of the Frank Lloyd Wright Foundation.
17
DOUBLE-HUNG WINDOWS 400 SERIES WOODWRIGHT ® WINDOWS
400 SERIES WOODWRIGHT ® INSERT WINDOWS
Woodwright® windows help replicate the look of traditional architecture. Their thick, sloped sills and historically accurate grille patterns bring old-world character to homes of all ages. To help match existing interiors when replacing or remodeling, they’re available in a variety of wood species and with a range of hardware and grille options, including custom grilles. CUSTOM SIZES For more information, see page 59.
Woodwright® insert windows give you all the advantages of Woodwright® full-frame windows, plus they install faster and easier while keeping the mess and disruption to a minimum. In most cases, you can even keep the original trim and preserve the character of your customers’ homes. Installation materials included. For more information, see page 77.
CUSTOM SIZES
Woodwright® windows give you the option to use a variety of graceful arches that can add an uncommon elegance.
Unequal Arch
Arch
Springline™
400 SERIES TILT-WASH WINDOWS
400 SERIES TILT-WASH INSERT WINDOWS
Year after year, the Andersen® 400 Series tilt-wash window is our best-selling double-hung window — and for good reason. It’s extremely energy efficient and offers a wide array of decorative and performance options. For more information, see page 83.
All the features of our best-selling doublehung window are now available in an insert window that’s faster and easier to install. Installation materials included. For more information, see page 95. CUSTOM SIZES
This product is available with Stormwatch® protection. For a copy of the Andersen® Coastal Product Guide, contact your Andersen supplier.
18
200 SERIES TILT-WASH WINDOWS
NARROLINE® WINDOW CONVERSION KIT
200 Series tilt-wash double-hung windows come in our most popular sizes and with our most requested options. They feature low-maintenance exteriors and real wood interiors. For more information, see page 221.
For homes with Andersen® Narroline® windows that were made after 1967, our quick conversion kit lets you turn them into tilt-wash double-hung windows with high-performance Low-E4® glass. For more information, see page 94.
NAR CON ROLIN ® KIT VERSI E ON
200 TILT SERIE -WA S SH
400 TILT SERIE INSE -WASH S RT
400 TILT SERIE -WA S SH
400 WOO SERIE DWR S IGH ® T 400 WO SERI INSEODWRIES GHT RT
DOUBLE-HUNG WINDOW FEATURES
Low-Maintenance Exteriors White Canvas Sandtone Terratone Forest Green Dark Bronze Black
Interiors Maple Oak Pine White
Easy Cleaning
PRODUCTS AT A GLANCE
Tilt-to-Clean Sash
Grilles Full Divided Light Simulated Divided Light Finelight™ (Grilles-Between-the-Glass) Removable Interior Grilles
Performance Options Stormwatch® Protection
Glass Additional glass options are available. See page 10 for details. Low-E4® Low-E4 Sun Low-E4 SmartSun™ Low-E Low-E Sun Low-E SmartSun Dual-Pane
Unit Sizes Minimum Width
1'-9 5/8"
1'-4 1/2"
1'-9 5/8"
1'-9 1/4"
1'-7 1/2"
Maximum Width
3'-9 5/8"
3'-9 5/8"
3'-9 5/8"
3'-8 7/8"
3'-3 1/2"
Minimum Height
3'-0 7/8"
2'-3 3/4"
3'-0 7/8"
3'-0 3/8"
2'-11 1/2"
Maximum Height
6'-4 7/8"
6'-5"
7'-8 7/8"
7'-6 5/8"
5'-11 1/2"
Fits Narroline® windows made after 1967
Custom Sizes Printing limitations prevent exact color duplication.
19
CASEMENT AWNING GLIDING WINDOWS 400 SERIES CASEMENT WINDOWS The Andersen® 400 Series casement window is our best-selling casement window. It starts with a design that is extremely energy efficient. The sash is solid wood and covered inside and out by low-maintenance Perma-Shield® cladding to protect against water damage. And the interior features rich, natural pine that creates a perfect frame for art glass and grille patterns. For more information, see page 31. CUSTOM SIZES
400 SERIES REPLACEMENT CASEMENT WINDOWS The casement window that set the standard for performance and durability comes ready for replacement. Provided with predrilled, through-the-jamb installation holes and the nailing flange removed. Special replacement extension jambs are also available to preserve the original alignment of trim and paint lines. Installation materials included. For more information, see page 49. CUSTOM SIZES
This product is available with Stormwatch® protection. For a copy of the Andersen® Coastal Product Guide, contact your Andersen supplier.
400 SERIES AWNING WINDOWS These windows are built on the same platform as our casement windows and deliver the same outstanding performance. For more information, see page 31. CUSTOM SIZES
400 SERIES REPLACEMENT AWNING WINDOWS Like our replacement casement, this window comes without a nailing flange and is available with special replacement extension jambs to preserve the original alignment of trim and paint lines. It also has predrilled, through-the-jamb installation holes, so it installs easily from inside or out. Installation materials included. For more information, see page 49. CUSTOM SIZES
This product is available with Stormwatch protection. For a copy of the Andersen® Coastal Product Guide, contact your Andersen supplier. ®
20
400 SERIES GLIDING WINDOWS
200 SERIES GLIDING WINDOWS
In addition to providing superior energy efficiency, reliable performance and uncommon beauty, both sash on our 400 Series gliding windows can be opened for improved ventilation. For more information, see page 115.
Andersen® 200 Series gliding windows are available in our most popular sizes. They come with low-maintenance exteriors and real wood or prefinished white interiors. For more information, see page 227.
200 GLID SERIE ING S
400 REP SERIE AWN LACEM S ING ENT 400 GLID SERIE ING S
400 REP SERIE CAS LACEM S EME ENT NT 400 AWN SERIE ING S
400 CAS SERIE EME S NT
CASEMENT, AWNING & GLIDING WINDOW FEATURES
Low-Maintenance Exteriors White Canvas Sandtone Terratone Forest Green Dark Bronze Black
Interiors Pine White
PRODUCTS AT A GLANCE
Grilles Full Divided Light For more shapes, colors and wood species, see page 29.
Simulated Divided Light Finelight™ (Grilles-Between-the-Glass) Removable Interior Grilles
Performance Options Stormwatch® Protection
Glass Additional glass options are available. See page 10 for details. Low-E4® Low-E4 Sun Low-E4 SmartSun™ Low-E Low-E Sun Low-E SmartSun Dual-Pane
Unit Sizes Minimum Width
1'-5"
1'-5"
2'-0 1/8"
2'-0 1/8"
2'-11 1/4"
2'-11 1/2"
Maximum Width
7'-0 5/8"
7'-0 5/8"
5'-11 7/8"
5'-11 7/8"
5'-11 1/4"
5'-11 1/2"
Minimum Height
2'-0 1/8"
2'-0 1/8"
1'-5"
1'-5"
1'-10 1/4"
1'-5 1/2"
Maximum Height
5'-11 7/8"
5'-11 7/8"
4'-0"
4'-0"
4'-11 1/4"
4'-11 1/2"
Custom Sizes Printing limitations prevent exact color duplication.
21
SPECIALTY WINDOWS 400 SERIES SPECIALTY WINDOWS Andersen® specialty windows are more than a collection of stylish shapes. They’re also an opportunity to take advantage of our 110-plus years of experience and craftsmanship to distinguish your customers’ homes, your work and your designs from everyone else’s. Whether it’s a bold signature statement with a custom-designed picture window or a delicate lighting accent, Andersen makes it easy to create the look you and your customers want. And it’s just one more reason why Andersen is CUSTOM SIZES the industry’s most trusted name. For more information, see page 121.
EXTENDED GOTHIC
ARCH
OCTAGON
TRAPEZOID
OVAL
CIRCLE
SPRINGLINE™ FLANKER
HALF CIRCLE Also available to match Andersen® 200 Series double-hung windows.
RECTANGULAR WINDOWS Andersen makes picture and transom windows to complement the sizes and profiles of Andersen® 400 Series double-hung, casement and awning windows, as well as Andersen 200 Series double-hung windows.
BAY & BOW WINDOWS Andersen® 400 Series bay and bow units feature all of the individual qualities of our Woodwright,® tilt-wash and casement windows. Each is delivered as a complete unit to help speed installation. Custom sizes are available for casement units, and all offer a choice of pine veneer or oak veneer head and seat boards. We also offer a cable support system for easier CUSTOM SIZES installation. For more information, see page 101.
22
FLEXIFRAME® WINDOWS Flexiframe® windows are available in custom sizes and can be designed in nearly any shape made with straight lines, providing no angle is less than 14 degrees. When other window companies say it can’t be done, Andersen does it easily — and beautifully. For more information, see page 138. CUSTOM SIZES
EXAMPLES OF ALTERNATIVE SHAPES
Detailed information about Stormwatch® protection can be found in the Andersen® Coastal Product Guide. For a copy, contact your Andersen supplier. Visit andersenwindows.com/coastal for more information.
23
GLIDING PATIO DOORS 400 SERIES FRENCHWOOD® GLIDING PATIO DOORS With their wide wood profiles, Frenchwood® gliding patio doors have the old-world character of traditional French doors, but also offer the convenience and space savings no hinged door can provide. Frenchwood® gliding doors also offer an extensive array of options and accessories and are available in two- and four-panel configurations to fit virtually any size requirement. For more information, see page 145. CUSTOM SIZES
200 SERIES NARROLINE® GLIDING PATIO DOORS Our 200 Series Narroline® gliding patio doors combine the beauty of natural wood with sleek contemporary profiles to maximize views. Available in two- and four-panel configurations to fit virtually any size requirement. CUSTOM SIZES For more information, see page 233.
200 SERIES PERMA-SHIELD® GLIDING PATIO DOORS Perma-Shield® gliding patio doors are protected inside and out with rigid vinyl cladding to give homes a contemporary look while keeping maintenance to a minimum. Available in two-panel configurations. For more information, see page 241.
24
CUSTOM SIZES
200 P E R S E RIE M A- S S HIE LD ®
200 N A R S E RIE ROL S INE ®
4 00 F RE S E RIE NCH S WO OD ®
GLIDING PATIO DOOR FEATURES
Low-Maintenance Exteriors White Canvas Sandtone Terratone
PANEL CONFIGURATIONS
Forest Green
Andersen gliding patio doors are available in the following panel configurations. See individual product sections for further details. Two-panel configurations are available assembled and unassembled for jobsite convenience. Examples below shown from exterior.
Dark Bronze
®
Black
Interiors Maple Oak Pine Same as Exterior
Grilles Stationary Panel
Two-Panel Right Open
Two-Panel Left Open
Full Divided Light Simulated Divided Light Finelight™ (Grilles-Between-the-Glass) Removable Interior Grilles
Glass Additional glass options are available. See page 10 for details. Low-E4® Tempered Four-Panel Center Open
Low-E4 Sun Tempered Low-E4 SmartSun™ Tempered Low-E Tempered
NEW BLINDS BETWEEN THE GLASS
Low-E Sun Tempered
Now available on select 200 Series Perma-Shield® gliding patio doors. Placed between two panes of insulated glass, these aluminum slat blinds are away from dust, dirt and damage. And a smooth, simple operation lets your customers control their view. For more information, see page 242.
Dual-Pane Tempered
PRODUCTS AT A GLANCE
White
Low-E SmartSun Tempered
Unit Sizes Minimum Width
4'-11 1/4"
4'-11 1/4"
4'-11 1/4"
Maximum Width
15'-9"
15'-9"
8'-0"
Minimum Height
6'-7 1/2"
6'-7 1/2"
6'-7 1/2"
Maximum Height
7'-11 1/2"
7'-11 1/2"
7'-11 1/2"
Custom Sizes Printing limitations prevent exact color duplication.
25
HINGED PATIO DOORS 400 SERIES FRENCHWOOD速 HINGED INSWING PATIO DOORS Frenchwood速 hinged inswing patio doors feature traditional styling with pine, oak, maple or prefinished white interior options. They come with a three-point locking system for enhanced security and performance. Available in one-, two- and three-panel configurations. CUSTOM SIZES For more information, see page 153.
400 SERIES FRENCHWOOD速 HINGED OUTSWING PATIO DOORS Frenchwood速 hinged outswing patio doors feature traditional styling with pine, oak, maple or prefinished white interior options. They come with a three-point locking system for enhanced security and performance. Available in oneand two-panel configurations. For more information, see page 163. CUSTOM SIZES
200 SERIES HINGED INSWING PATIO DOORS Our 200 Series hinged inswing patio doors are built with fiberglass panel construction, traditional styling, white interiors and three exterior colors. Their hook-deadbolt lock provides extra strength, a more weathertight seal and added security compared to ordinary deadbolt locks. They are available in one- and two-panel configurations. For more information, see page 247.
26
200 HING SERIES ED IN SWIN G
4 00 F RE S E RIE INSWNCHW S IN G O O D ® 4 00 F RE S E RI OUT NCHWES SWI OOD ® NG
HINGED PATIO DOOR FEATURES
Low-Maintenance Exteriors White Sandtone Terratone Forest Green Maple Oak Pine White
Grilles Full Divided Light Simulated Divided Light Finelight™ (Grilles-Between-the-Glass) Removable Interior Grilles
Glass Additional glass options are available. See page 10 for details. Low-E4® Tempered Low-E4 Sun Tempered Low-E4 SmartSun™ Tempered Low-E Tempered Low-E Sun Tempered Low-E SmartSun Tempered Dual-Pane Tempered
AT A GLANCE
For a special design touch, frame any Andersen® patio door with a border of Andersen sidelights, transoms or stationary panels. They dramatize the exterior appearance, enhance the view and create a larger wall of light.
Interiors
PRODUCTS AT A GLANCE PRODUCTS
SIDELIGHTS, TRANSOMS & STATIONARY PANELS
Unit Sizes
For more shapes, colors and wood species, see pages 28–29.
Minimum Width
4'-0"
4'-0"
4'-0"
Maximum Width
8'-11 1/8"
5'-11 1/4"
5'-11 1/4"
Minimum Height
6'-7 1/2"
6'-7 1/2"
6'-7 1/2"
Maximum Height
7'-11 1/2"
7'-11 1/2"
7'-11 1/2"
Custom Sizes
Printing limitations prevent exact color duplication.
27
ENTRY DOORS Andersen® entranceways combine exceptional beauty and detail with dramatic sizes and shapes to turn ordinary entranceways into grand statements. For more information, see page 191. • The very finest grades of oak, maple, cherry, pine, mahogany*, alder and fir. Other wood species are available through special order. • Available with wood exteriors or aluminum-clad wood in 21 colors. • Divided light grilles in standard and custom patterns. • Sidelights and transoms give you increased design flexibility. • Optional handle hardware comes in a variety of styles and finishes. • A wide variety of glass options offer energy efficiency and beauty. Decorative glass options are also available.
*Actual wood is Sapele, a non-endangered species of mahogany, grown in Africa, with color and characteristics similar to American mahoganies.
28
COMPLEMENTARY WINDOWS & PATIO DOORS
These windows and doors are carefully handcrafted to complement our 400 Series products with dramatic sizes and extraordinary shapes to give homes a signature look. They include casement and specialty windows, as well as curved top hinged inswing, hinged outswing and folding outswing doors. Custom sizes and shapes are also available.
CASEMENT WINDOWS Andersen complementary casement windows offer easy operation along with old-world style. They include French casements — twin sash inside one frame with, unlike ordinary casements, no mullion bar between them, providing a totally unobstructed view. Complementary casement windows are available in rectangles, trapezoids and a variety of arched shapes. For more information, see page 53.
SPECIALTY WINDOWS
EXTERIOR AND INTERIOR OPTIONS EXTERIOR COLORS
White
Canvas
Sandtone
Terratone
Forest Green
Dark Bronze
Black
Cocoa Bean
Red Rock
Prairie Grass
Dove Gray
CURVED TOP PATIO DOORS With features like Romanesque arches, towering transoms and insulated decorative art glass, nothing else quite matches the grandeur curved top patio doors can bring to a home. For more information, see page 175.
INTERIOR OPTIONS
Pine
Maple
PRODUCTS AT A GLANCE
Andersen specialty windows let you choose from 35 uncommon shapes, including elegant arches, striking angles and compelling curves. For more information, see page 141.
FOLDING OUTSWING DOORS When closed, they are a stately wall of light. When open, they fold virtually out of sight. Choose from configurations up to 48 feet wide and operating modes that allow the doors to open from the left, right or center. For more information, see page 185.
Oak
White
(As shown from the interior) Printing limitations prevent exact color duplication. See your Andersen supplier for actual color samples. Naturally occurring variations in grain, color and texture of wood make each window one-of-a-kind.
29
NOTES PAGE
30
400 Series Casement & Awning Windows
CASEMENT & AWNING WINDOWS CUSTOM SIZING in 1â „8" (3) increments
SECTION REFERENCE Alignment Grid ....................... 34-35 Tables of Sizes ....................... 36-40 Specifications ......................... 41-44 Custom Sized Windows ................ 45 Grille Patterns .............................. 46 Window Details ....................... 47-48 Joining Details.............................. 48 Combination Designs ................. 255 Performance Data ...................... 269 Warranty .............................290-291 Dimensions in parentheses are in millimeters.
CASEMENT & AWNING WINDOWS FEATURES I
Frame A A seamless one-piece, rigid vinyl frame cover is secured to the exterior of the frame to protect the wood frame from moisture and maintain an attractive appearance while minimizing maintenance.
B The seamless rigid exterior vinyl cover
D
C
extends 1 3⁄8" (35) around the perimeter of the unit. This creates a flange to help seal the unit to the structure.
Performance Grade (PG) Upgrade H
E
F
G
EXTERIOR
with a water-repellent preservative for long-lasting* protection and performance.
Hardware
D Interior stops are unfinished pine.
Smooth Control Hardware System
Low-maintenance prefinished White interiors are also available.
The smooth control hardware system employs a worm gear drive for easy operation. Units with a split-arm operator move the sash away from the frame to provide easier glass cleaning. CXW15, CXW155, CXW16 and CXW25 sizes are not available with splitarm hardware. Hardware option and finish must be specified. Operator handle and cover sold separately.
sash — a vinyl weld protects each sash corner for superior weathertightness. It maintains an attractive appearance and minimizes maintenance.
F Wood core members provide excellent structural stability and energy efficiency.
G Flexible bulb weatherstripping or vinyl closed-cell foam weatherstripping is factory installed on the perimeter of the sash.
Glass H A glazing bead and silicone provide superior weathertightness and durability.
I High-performance glass options include: • Low-E4® glass® • Low-E4® HeatLock™ glass • Low-E4® Sun glass • Low-E4® SmartSun™ glass • Low-E4® SmartSun™ HeatLock™ glass Tempered glass and other glass options are available. Contact your Andersen supplier.
Performance upgrades are available for select casement and awning sizes, allowing these units to achieve higher performance ratings. Performance Grade (PG) Ratings replace Design Pressure (DP) Ratings for measuring product performance. For up-to-date performance information of individual products visit andersenwindows.com. Contact your Andersen supplier for availability.
B
C Wood frame members are treated
Sash E Rigid vinyl encases the entire
Casement and awning windows are available with Stormwatch® protection. For a copy of the Andersen® Coastal Product Guide go to andersenwindows.com/coastal or contact your Andersen supplier.
Single-Actuation Casement Lock On casement windows, a single-actuation lock easily releases all locking points on casement sash while the reach-out action eliminates binding when closing. The lock handle is offered in finishes that coordinate with your specified hardware option. Awning Sash Locks
INTERIOR
White
Canvas
Sandtone
Forest Green
Dark Bronze
Black
Terratone
Pine
White
Naturally occurring variations in grain, color and texture of wood make each window one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
HARDWARE FINISHES
Antique Brass
Black
Bright Brass
Gold Dust
Oil Rubbed Polished Bronze Chrome
Brushed Chrome
Distressed Distressed Bronze Nickel
Satin Nickel
Stone
White
Distressed bronze and oil rubbed bronze are "living" finishes that will change with time and use.
CASEMENT & AWNING HARDWARE OPTIONS
**
CLASSIC SERIES™
ESTATE ™
A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite. Patterned Glass Patterned glass options are available. See page 10 for more details.
Awning sash locks provide an added measure of security and weathertightness. Hardware style and finish options are compatible with Andersen® casement windows to ensure consistency in appearance when used in combination designs.
* Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 400 Series Limited Warranty. ** Hardware sold separately. Dimensions in parentheses are in millimeters. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
32
Stone | White
Antique Brass | Bright Brass Brushed Chrome | Distressed Bronze Distressed Nickel | Oil Rubbed Bronze Polished Chrome | Satin Nickel
TRADITIONAL FOLDING
CONTEMPORARY FOLDING
Antique Brass | Black | Bright Brass Distressed Bronze | Distressed Nickel Gold Dust | Oil Rubbed Bronze | Satin Nickel Stone | White
Black | Bright Brass Gold Dust | Oil Rubbed Bronze Satin Nickel | Stone | White
Folding handle avoids interference with window decorating treatments.
Bold name denotes finish shown.
400 Series Casement & Awning Windows
ACCESSORIES Sold Separately Frame
Hardware
Extension Jambs
Corrosion-Resistant Components Corrosion-Resistant Components
Operator Spline Cover
TruScene® Insect Screen
Corrosion-resistant hinge and operator arm hardware is designed for applications in harsh and corrosive environments such as heavy industrial or coastal areas.*
An operator spline cover is an attractive cap that covers the roto operator stud when the handle has been removed to control access or operation of the window. The operator spline cover should not be used on any window designated or intended for emergency escape or rescue. Please consult your local building code official for local egress code requirements.
Window Opening Control Device Kit
Power Operator for Awning Windows
Standard jamb depth is 2 7⁄8" (73). Extension jambs are available in unfinished pine or prefinished White. Some sizes may be veneered. Factory-applied and non-applied interior extension jambs are available in 1⁄16" (1.5) increments between 4 9⁄16" (116) and 7 1⁄8" (181). Extension jambs can be factory applied to either three sides (stool and apron application) or four sides (picture frame casing).
A Window Opening Control Device Kit is available, which limits sash travel to less than 4" (102) when the window is first opened. Available in Stone and White.
Thick Replacement Extension Jambs
Available in Classic Series™ design only.
To help preserve original alignment of trim and paint lines in replacement situations, special 1 1/8" (29) thick replacement extension jambs are available. Factoryapplied and non-applied extension jambs are available in 1⁄16" (1.5) increments between 4 9⁄16" (116) and 7 1⁄8" (181). Non-applied extension jambs are available in 12' (3658) lineals. Detail on page 46. Drywall Return Bead
Special Use Operator Handles Compact Operator Handle Specially designed for use in situations where blinds or other window treatments interfere with standard operator handle. Available in White or Stone finish. Easy-Grip Handle Larger knob makes it easier to grip and operate. Available in White or Stone finish.
A drywall return bead is available in a narrow or wide dimension with unfinished pine or prefinished White interiors. Can be ordered factory-applied or in non-applied lineals. Detail on page 46. For more information about glass, patterned glass, art glass, grilles and TruScene® insect screen see pages 10-17. For more information about combination designs, product performance, installation accessories and warranty see pages 255-291 or visit
andersenwindows.com
Metal T-Handle
Our smallest operator handle, the metal T-handle may make it more difficult for young children (5 and under) to open the window.
Insect Screens
Awning windows can now be ordered with an operator enhanced by PowerAssist™ technology that opens and closes the window with the touch of a button. Easy to install, the 24-volt system features a concealed window power drive, battery back-up in case of a power outage and a moisture sensor that automatically closes the window when it rains. A wireless remote is available (sold separately). The PowerAssist system is controlled by a wall-mounted console, which includes a power box, battery, touch pad and mounting bracket. Windows can be ordered factoryprepped to save time or ordered as a field kit. Power driver requires field installation. PowerAssist technology eliminates the need for sash locks and is available for windows up to five feet wide. It is not available on units with Stormwatch® protection or PG upgrades. Contact your Andersen supplier for availability.
Glass Andersen ® Art Glass Andersen art glass panels come in a variety of original patterns, including four Frank Lloyd Wright ® Series designs. See pages 213-214 for details on Andersen art glass. Visit andersenwindows.com/artglass for details and pattern information.
Exclusive Andersen® TruScene® insect screens provide over 50% more clarity than our conventional insect screens for a beautiful unobstructed view. They allow more fresh air and sunlight in, while doing a better job of keeping out small insects. For casement and awning windows, they are available with Stoneor White-colored frames or with pine veneer frame interiors to blend with the wood interior of the window. Conventional Insect Screen Conventional insect screens have charcoal powder-coated aluminum screen mesh. Available with frames in White or Stone.
Grilles Grilles are available in a variety of configurations and widths. For casement and awning grille patterns see page 46.
Exterior Trim This product is available with Andersen® Exterior Trim. See pages 215-220 for details. CAUTION: • Painting and staining may cause damage to rigid vinyl. • 400 Series windows in Terratone color may be painted any color lighter than Terratone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Terratone any color darker than Terratone. • Do not paint 400 Series windows with White, Canvas, Sandtone, Forest Green, Dark Bronze or Black exterior colors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
For more information on child safety, write: Andersen Corporation LookOut for Kids® Program 100 Fourth Avenue North Bayport, MN 55003 Call 1-800-313-8889 or email us at: lofk@andersencorp.com
* Visit andersenwindows.com/warranty or contact your Andersen supplier for details. Dimensions in parentheses are in millimeters. “Frank Lloyd Wright” is a registered trademark of the Frank Lloyd Wright Foundation.
33
CASEMENT & AWNING WINDOWS Alignment Grid for Standard Size Casement, Awning, Picture and Transom Windows Specialty
1'-5" (432)
1'- 8 1 ⁄ 2" (521)
See the specialty window section, starting on page 121, for these and other specialty shapes and sizes.
3'-4 13 ⁄ 16" (1037)
2'-0 1 ⁄ 8" (613)
2'-4 3 ⁄ 8" (721)
AFC106
AFCW106
AFCP3006
AFC206
AFC11
AFCW11
AFCP301
AFC21
CTQC1
CTQCW1
CTQCX1
CTQA3
CTC1
CTCW1
CTCX1
CTCXW1
2'-7 1 ⁄ 2" (800)
2'-11 15 ⁄ 16" (913)
2'-9 3 ⁄4" (857)
3'-4 3 ⁄4" (1035)
4'-0" (1219)
CTC2
Transom
1'-0" (305)
CTR1510 CTR1810
CTR2010
CTR2410 CTR2810 CTR2910
PTR3010
CTR3010
CTR3410
PTR3510
CTR4010
PTR4010
CTR22010
CTR21810
Awning
1'-5" (432) 1'-8 1 ⁄ 2" (521) 2'-0 1 ⁄ 8" (613) 2'-4 3 ⁄ 8" (721)
AR21
AR251
AR281
AR31
AR351
AR41
AR221
AN21
AN251
AN281
AN31
AN351
AN41
AN221
A21
A251
A281
A31
A351
A41
A221
AW21
AW251
AW281
AW31
AW351
AW41
AW221
AX251
AX281
AX31
AX351
AX41
AXW281
AXW31
AXW351
AXW41
A335
A3535
2'-7 1 ⁄ 2" (800) 2'-11 15 ⁄ 16" (913) 3'-4 3 ⁄4" (1035) Casement, Awning and Picture
2'-0 1 ⁄ 8" (613) 2'-4 3 ⁄ 8" (721) 2'-11 15 ⁄ 16" (913) 3'-4 13 ⁄ 16" (1037)
CR12
CN12
C12
CW12
CR125
CN125
C125
CW125
CX125
CR13
CN13
C13
CW13
CX13
CR23
CXW13
P3030
CN23
P3530
C23
P4030
CR135
CN135
C135
CW135
CX135
CR235
CXW135
P3035
CN235
P3535
C235
P4035
CR14
CN14
C14
CW14
CX14
CR24
CXW14
P3040
CN24
P3540
C24
CR145
CN145
C145
CW145
CX145
CR245
CXW145
P3045
CN245
P3545
C245
P4045
CR15
CN15
C15
CW15
CX15
CR25
CXW15 PA3050*
P3050
CN25
P3550
C25
P4050
CR155
CN155
C155
CW155
CX155
CR255
CXW155
P3055
CN255
P3555
C255
P4055
CR16
CN16
C16
CW16
CX16
CR26
CXW16
P3060
CN26
P3560
C26
CN22
C22
CN225
C225
4'-0" (1219)
4'-4 13 ⁄ 16" (1341)
A212
A312
AP32V
AP352V
AP42V
P4040
4'-11 7 ⁄ 8" (1521) PA3550*
5'-4 13 ⁄ 16" (1646)
5'-11 7 ⁄ 8" (1826)
• Dimensions in parentheses are in millimeters. *Actual height of 4'-11 1 3 ⁄ 16 " (1519). **Actual height of 5'-11 5 ⁄ 8" (1819).
34
A213
PA3060 AXW312** A313
PA3560
PA4060
P4060
4'-8 1 ⁄ 2" (1435)
4'-11 7 ⁄ 8" (1521)
5'-1" (1549)
5'-2 3 ⁄4" (1594)
5'-4 13 ⁄ 16" (1646)
5'-11 7 ⁄ 8" (1826)
5'-11 5 ⁄ 8" (1819)
7'-0 5 ⁄ 8" (2149)
Similar jamb profiles enable these standard-size windows to be combined in multiple combinations. Custom-size windows are also available.
AFCW206 AFCW21
CTCW2
PTR4510
CTR4810
CTCX2
PTR5010
CTR22410
CTR5110
CTR5210
CTR31810
CTR22810
CTC3
PTR5510
CTR51110
CTR6010
CTR23010
CTR32010
PTR6010
CTR7010
Window widths and heights shown. See individual size charts for additional dimensions.
CTR32410
AR451
AR2251
AR51
AR2281
AR551
AR231
AR61
AR321
AR3251
AN451
AN2251
AN51
AN2281
AN551
AN231
AN61
AN321
AN3251
A451
A2251
A51
A2281
A551
A231
A61
A321
A3251
AW451
AW2251
AW51
AW2281
AW551
AW231
AW61
AW321
AW3251
AX451
AX2251
AX51
AX2281
AX551
AX231
AX61
AXW51
AXW2281
AXW551
AXW231
AXW61
AXW451
400 Series Casement & Awning Windows
4'-4 13 ⁄ 16" (1341)
In addition to venting configurations shown, other standard configurations are available.
AX3251
CW22
CN32
C32
CW32
CW225
CN325
C325
CW325
P4530
CW23
P5030
CN33
CX23
P5530
CXW23
C33
P6030
CW33
P4535
CW235
P5035
CN335
CX235
P5535
CXW235
C335
P6035
CW335
P4540
CW24
P5040
CN34
CX24
P5540
CXW24
C34
P6040
CW34
P4545
CW245
P5045
CN345
CX245
P5545
CXW245
C345
P6045
CW345
P4550
CW25
P5050
CN35
CX25
P5550
CXW25
C35
P6050
CW35
P4555
CW255
P5055
P4560
CW26
P5060
35
CASEMENT & AWNING WINDOWS Table of Casement and Transom Window Sizes Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 1'-5" (432)
1'-8 1 ⁄ 2" (521)
2'-0 1 ⁄ 8" (613)
2'-4 3 ⁄ 8" (721)
2'-7 1 ⁄ 2" (800)
2'-11 15 ⁄ 16" (913)
2'-9 3 ⁄4" (857)
3'-4 3 ⁄4" (1035)
4'-0" (1219)
4'-8 1 ⁄ 2" (1435)
Minimum Rough Opening
1'-5 1 ⁄ 2" (445)
1'-9" (533)
2'-0 5 ⁄ 8" (625)
2'-4 7 ⁄ 8" (733)
2'-8" (813)
3'-0 1 ⁄ 2" (927)
2'-10 1 ⁄4" (870)
3'-5 1 ⁄4" (1048)
4'-0 1 ⁄ 2" (1232)
4'-9" (1448)
Unobstructed Glass
12 5 ⁄ 8" (321)
16 1 ⁄ 8" (410)
19 3 ⁄4" (502)
24" (610)
27 1 ⁄ 8" (689)
31 9 ⁄ 16" (802)
12 5 ⁄ 8" (321)
16 1 ⁄ 8" (410)
19 3 ⁄4" (502)
24" (610)
Unobstructed Glass
12 3 ⁄ 16" (310)
15 11 ⁄16" (398)
19 5 ⁄ 16" (491)
23 9 ⁄ 16" (599)
26 11 ⁄ 16" (678)
31 1 ⁄ 8" (791)
28 15 ⁄ 16" (735)
35 15 ⁄ 16" (913)
43 3 ⁄ 16" (1097)
51 11 ⁄ 16" (1313)
CTR2410
CTR2810
CTR3010
CTR2910
CTR3410
CTR4010
CTR4810
CTR21810
CTR22010
CTR22410
CN22
C22
CW22*
CN225
C225
CW225*
Window Dimension
(casement, single sash only)
1'-0 1 ⁄ 2" (318)
7 3 ⁄ 16" (183)
1'-0 1 ⁄ 2" (318)
7 3 ⁄ 16" (183)
CUSTOM WIDTHS — 1'-5" to 7'-0 5 ⁄ 8" 1'-0"
1'-0" (305) 1'-0" (305)
(transom, single sash only)
CTR1510
CTR1810
CTR2010
CUSTOM HEIGHTS — 2'-0 1 ⁄ 8" to 5'-11 7 ⁄ 8"
19 5 ⁄ 16" (491) 23 9 ⁄ 16" (598)
CR12
CN12
C12
CW12*
CR125
CN125
C125
CW125*
CX125
CR13
CN13
C13
CW13*
CX13
CXW13
CR23
CN23
C23
CW23*
CR135
CN135
C135
CW135◊*
CX135◊
CXW135◊
CR235
CN235
C235
CW235◊*
CR14
CN14
C14
CW14◊*
CX14◊
CXW14◊
CR24
CN24
C24
CW24◊*
CR145
CN145
C145
CW145◊*
CX145◊
CXW145◊
CR245
CN245
C245
CW245◊*
CR15
CN15
C15
CW15◊*
CX15◊
CXW15◊**
CR25
CN25
C25
CW25◊*
CR155
CN155
C155
CW155◊*
CX155◊
CXW155◊**
CR255
CN255
C255
CW255◊*
CR16
CN16
C16
CW16◊*
CX16◊
CXW16◊**
CR26
CN26
C26
CW26◊*
67 1 ⁄ 16" (1703)
60" (1524)
55 1 ⁄ 16" (1399)
48" (1219)
43 3 ⁄ 16" (1097)
36" (914)
31 1 ⁄ 8" (791)
2'-0 5 ⁄ 8" (625) 2'-4 7 ⁄ 8" (733) 3'-0 1 ⁄ 2" (927) 6'-0 3 ⁄ 8" (1838)
5'-5 3 ⁄ 8" (1660)
5'-0 3 ⁄ 8" (1534)
4'-5 3 ⁄ 8" (1356)
4'-0 1 ⁄ 2" (1232)
3'-5 3 ⁄ 8" (1051)
2'-0 1 ⁄ 8" (613) 2'-11 15 ⁄ 16" (913) 5'-11 7 ⁄ 8" (1826)
5'-4 13 ⁄ 16" (1646)
4'-11 7 ⁄ 8" (1521)
4'-4 13 ⁄ 16" (1341)
4'-0" (1219)
3'-4 13 ⁄ 16" (1037)
2'-4 3 ⁄ 8" (721)
CUSTOM WIDTHS — 1'-5" to 2'-11 15 ⁄ 16"
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. ◊ Meet or exceed clear opening area of 5.7 sq.ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610) with appropriate hardware, straight- or split-arm operator, specified. See tables on pages 41-42. *Meet clear opening width of 20" (508) using sill hinge control bracket with split-arm operator specified (bracket can be pivoted for cleaning position) and meet clear opening width of 22" (559) with straight-arm operator specified. **Available with straight-arm operators only.
36
5'-11 5 ⁄ 8" (1819)
5'-1" (1549)
5'-11 7 ⁄ 8" (1826)
7'-0 5 ⁄ 8" (2149)
5'-3 1 ⁄4" (1607)
6'-0 1 ⁄ 8" (1832)
5'-1 1 ⁄ 2" (1562)
6'-0 3 ⁄ 8" (1838)
7'-1 1 ⁄ 8" (2162)
27 1 ⁄ 8" (689)
31 9 ⁄ 16" (802)
16 1 ⁄ 8" (410)
19 3 ⁄4" (502)
24" (610)
57 15 ⁄ 16" (1472)
66 13 ⁄ 16" (1697)
56 3 ⁄ 16" (1427)
67 1 ⁄ 16" (1703)
79 13 ⁄ 16" (2027)
400 Series Casement & Awning Windows
5'-2 3 ⁄4" (1594)
Custom-size windows are available in 1 ⁄ 8" (3) increments. Windows can also be custom sized
CTR5210
CTR51110
CTR5110
CTR6010
CTR7010
to match standard sizes ending in a sixteenth of an inch. Single windows only. See page 45 for
CTR22810
CTR23010
CTR31810
CTR32010
CTR32410
CN32
C32
CW32*
CN325
C325
CW325*
custom sizes and specifications.
Left Left
Right Right
Stationary Stationary
Choose left, right or stationary as viewed from the exterior. In addition to venting shown in table, CX23
CXW23
CN33
C33
CW33*
other standard configurations are available for single, twin and triple windows. Transom (CTR) windows are stationary only.
CX235◊
CXW235◊
CN335
C335
CW335◊*
Twin and triple windows shown have one continuous outer frame. CX24◊
CXW24◊
CN34
C34
CW34◊*
Transom (CTR) window can be used over casement or awning windows and may be rotated 90° and used as a sidelight with
CX245◊
CXW245◊
CN345
C345
CW345◊*
casement, awning or picture windows. Grille patterns shown on page 46.
CX25◊
CXW25◊**
CN35
C35
CW35◊*
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. ◊ Meet or exceed clear opening area of 5.7 sq.ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610) with appropriate hardware, straight- or split-arm operator, specified. See tables on pages 41-42. *Meet clear opening width of 20" (508) using sill hinge control bracket with split-arm operator specified (bracket can be pivoted for cleaning position) and meet clear opening width of 22" (559) with straight-arm operator specified. **Available with straight-arm operators only.
37
CASEMENT & AWNING WINDOWS Table of Awning Window Sizes
Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96
Minimum Rough Opening
2'-0 5 ⁄ 8" (625)
2'-4 7 ⁄ 8" (733)
2'-8" (813)
3'-0 1 ⁄ 2" (927)
3'-5 3 ⁄ 8" (1051)
4'-0 1 ⁄ 2" (1232)
4'-5 3 ⁄ 8" (1356)
5'-0 3 ⁄ 8" (1534)
5'-5 3 ⁄ 8" (1660)
6'-0 3 ⁄ 8" (1832)
Unobstructed Glass (single sash only)
26 11 ⁄ 16" 31 1 ⁄ 8" (791) (678) CUSTOM WIDTHS — 2'-0 1 ⁄ 8" to 5'-11 7 ⁄ 8"
36" (914)
43 3 ⁄ 16" (1097)
48" (1219)
55 1 ⁄ 16" (1399)
60" (1524)
67 1 ⁄ 16" (1703)
23 9 ⁄16" (598)
AR21
AR251
AR281
AR31
AR351
AR41
AR451
AR51
AR551
AR61
AN21
AN251
AN281
AN31
AN351
AN41
AN451
AN51
AN551
AN61
A21
A251
A281
A31
A351
A41
A451
A51
A551
A61
AW21
AW251
AW281
AW31
AW351
AW41
AW451
AW51
AW551
AW61
AX251
AX281
AX31
AX351
AX41
AX451
AX51
AX551
AX61
CUSTOM HEIGHTS — 1'-5" to 2'-11 1 5 ⁄ 16"
19 5 ⁄ 16" (491)
27 1 ⁄ 8" (689)
2'-8" (813)
2'-7 1 ⁄ 2" (800)
12 5 ⁄ 8" (321)
5'-11 7 ⁄ 8" (1819)
16 1 ⁄ 8" (410)
5'-4 13 ⁄ 16" (1646)
19 3 ⁄4" (502)
4'-11 7 ⁄ 8" (1521)
24" (610)
4'-4 13 ⁄ 16" (1341)
1'-5 1 ⁄ 2" (445)
4'-0" (1219)
1'-9" (533)
3'-4 13 ⁄ 16" (1037)
2'-0 5 ⁄ 8" (625)
2'-11 15 ⁄ 16" (913)
2'-4 7 ⁄ 8" (733)
2'-7 1 ⁄ 2" (800)
1'-5" (432)
2'-4 3 ⁄ 8" (721)
2'-0 1 ⁄ 8" 1'-8 1 ⁄ 2" (521) (613)
2'-0 1 ⁄ 8" (613)
2'-4 3 ⁄ 8" (721)
Window Dimension
AXW281 CUSTOM HEIGHTS 2'-11 7 ⁄ 8" to 4'-0" venting only
36 3 ⁄ 8" (924) 43 5 ⁄ 8" (1108)
3'-5 1 ⁄4" (1048) 4'-0 1 ⁄ 2" (1232)
4'-0" (1219)
3'-4 3 ⁄4" (1035)
CUSTOM WIDTHS —
2'-0 1 ⁄ 8"
2'-0 1 ⁄ 8" 2'-11 15 ⁄ 16" (913) (613)
Minimum Rough Opening
2'-0 5 ⁄ 8" (625)
AXW41
AXW451
AXW51
to 4'-0" venting only
A335
A3535
AP32V
AP352V
3'-0 1 ⁄ 2" (927)
AXW551
AP42V
2'-11 15 ⁄ 16" (913)
3'-4 13 ⁄ 16" (1037)
4'-0" (1219)
2'-0 1 ⁄ 8" (613)
2'-11 15 ⁄ 16" (913)
3'-0 1 ⁄ 2" (927)
3'-5 3 ⁄ 8" (1051)
4'-0 1 ⁄ 2" (1232)
2'-0 5 ⁄ 8" (625)
3'-0 1 ⁄ 2" (927)
A213
A313
A312
A212
(A31/A31)
5'-0 3 ⁄ 8" (1534)
(A21/A21)
4'-11 13 ⁄ 16" (1519)
AXW351
4'-0 1 ⁄ 2" (1232)
4'-0" (1219)
Window Dimension
AXW31
CUSTOM HEIGHTS > 2'-7 1 ⁄ 2" stationary only
31 9 ⁄ 16" (802)
3'-0 1 ⁄ 2" (927)
2'-11 15 ⁄ 16" (913)
CUSTOM WIDTHS > 4'-11 7 ⁄ 8" stationary only
PA3050
AXW312
(AXW31/AXW31)
PA3550
(AXW351/A351)
6'-0 3 ⁄ 8" (1838)
5'-11 7 ⁄ 8" (1826)
(1832)
6'-0 1 ⁄ 8"
(1826)
5'-11 5 ⁄ 8"
(AXW31/A31)
PA3060
(AP32V/A31)
PA3560
(AP352V/A351)
PA4060
(AP42V/A41)
(A21/A21/A21) (A31/A31/A31)
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
38
AXW61
4'-8 1 ⁄ 2" (1435)
5'-2 3 ⁄4" (1594)
5'-11 5 ⁄ 8" (1826)
5'-11 7 ⁄ 8" (1826)
7'-0 5 ⁄ 8" (2149)
4'-0 1 ⁄ 2" (1232)
4'-9" (1448)
5'-3 1 ⁄4" (1607)
6'-0 1 ⁄ 8" (1832)
6'-0 3 ⁄ 8" (1838)
7'-1 1 ⁄ 8" (2162)
19 5 ⁄ 16" (491)
23 9 ⁄ 16" (598)
27 1 ⁄ 8" (689)
31 1 ⁄ 8" (1703)
19 5 ⁄ 16" (491)
23 9 ⁄ 16" (598)
AR221
AR2251
AR2281
AR231
AR321
AR3251
AN221
AN2251
AN2281
AN231
AN321
AN3251
A221
A2251
A2281
A231
A321
A3251
AW221
AW2251
AW2281
AW231
AW321
AW3251
AX2251
AX2281
AX231
400 Series Casement & Awning Windows
4'-0" (1219)
Custom-size windows are available in 1 ⁄ 8" (3)
AX3251
increments. Windows can also be custom sized to match standard sizes ending in a sixteenth of an inch. Single windows only. See page 45 for custom sizes and specifications.
Venting Venting
Stationary Stationary
Choose venting or stationary. AXW551 and AXW61 windows are stationary only. In addition AXW2281
AXW231
to venting shown in table, other standard configurations are available for twin, triple and stacked windows. Twin, triple and stacked windows shown have one continuous outer frame. Awning window must be installed to vent as shown and should not be rotated and used as a hopper. Transom (CTR) window can be used over casement or awning windows and may be rotated 90° and used as a sidelight with casement, awning or picture windows. Grille patterns shown on page 46.
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
39
CASEMENT & AWNING WINDOWS Table of Picture and Transom Window Sizes Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Unit Dimension
2' -11 15/16" (913)
3'-4 13/16" (1037)
4'-0" (1219)
4'-4 13/16" (1341)
4'-11 7/8" (1521)
5'-4 13/16" (1646)
5'-11 7/8" (1826)
Minimum Rough Opening
3'-0 1/2" (927)
3'-5 3/8" (1051)
4'-0 1/2" (1232)
4'-5 3/8" (1356)
5'-0 3/8" (1534)
5'-5 3/8" (1660)
6'-0 3/8" (1838)
Unobstructed Glass
31 1/8" (791)
36" (914)
43 3/16" (1097)
48" (1219)
55 1/16" (1399)
60" (1524)
67 1/16" (1703)
PTR4510
PTR5010
PTR5510
PTR6010
1'-0"
7 3/16" (183)
1'-0 1/2" (318)
1-0" (305)
CUSTOM WIDTHS — 2'-11 1 5 ⁄ 16" to 5'-11 7 ⁄ 8" PTR3010
PTR3510
PTR4010
CUSTOM WIDTHS — 5'-0" to 5'-11 7 ⁄ 8"
P3030
P3035
P3535
P3540
P4030
P4035
P4040
P4530
P4535
P4540
P5030
P5035
P5040
are available in 1 ⁄ 8" (3) increments. Windows can also be custom sized to
P5530
P6030
match standard sizes ending in a sixteenth of an inch. See page 45 for custom sizes
P5535
P6035
and specifications.
Picture and transom (PTR) P5540
P6040
48" (1219)
4'-5 3/8" (1356)
4'-4 13/16" (1341)
P3040
P3530
CUSTOM HEIGHTS — 3'-0" to 4'-11 7 ⁄ 8"
CUSTOM HEIGHTS — 3'-0" to 5'-11 7 ⁄ 8"
31 1/8" (791) 36" (914) 43 3/16" (1097)
3'-0 1/2" (927) 3'-5 3/8" (1051) 4'-0 1/2" (1232)
4'-0" (1219)
3'-4 13/16" (1037)
2'-11 15/16" (913)
CUSTOM WIDTHS — 3'-0" to 4'-11 7 ⁄ 8"
Custom-size windows
windows may be rotated 90° to align with casement or awning windows.
P3045
P3545
P4045
P4545
P5045
P5545
P6045
Grille patterns shown on
55 1/16" (1399)
P3550
P4050
P4550
P5050
P3055
P3555
P4055
P4555
P5055
P3060
P3560
P4060
P4560
P5060
P5550
P6050
60" (1524)
P3050
67 1/16" (1703)
5'-0 3/8" (1534) 5'-5 3/8" (1660) 6'-0 3/8" (1838)
5'-11 7/8" (1826)
5'-4 13/16" (1646)
4'-11 7/8" (1521)
page 46.
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
40
Window Number
Clear Opening Area Straight-Arm Sq. Ft./(m2)
Clear Opening Area Split-Arm Sq. Ft./(m2)
Clear Opening in Full Open Position Straight-Arm Split-Arm Width Width Height Inches/(mm) Inches/(mm) Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Area Straight-Arm Sq. Ft./(m2)
Vent Area Split-Arm Sq. Ft./(m2)
Top of Subfloor to Top of Inside Sill Stop Inches/(mm)
Overall Window Area Sq. Ft./(m2)
CR12
—
1.0
(0.09)
—
7 5/16" (186)
19 1/4"
489)
1.7
(0.16)
—
1.5
(0.14)
60 9/16"
(1538)
2.8
(0.26)
CR125
—
1.2
(0.11)
—
7 5/16" (186)
23 7/16"
(595)
2.0
(0.19)
—
1.8
(0.17)
56 3/8"
(1432)
3.3
(0.31)
CR13
—
1.6
(0.15)
—
7 5/16" (186)
31 1/16"
(789)
2.7
(0.25)
—
2.4
(0.22)
48 3/4"
(1238)
4.2
(0.39)
CR135
—
1.8
(0.17)
—
7 5/16" (186)
35 15/16"
(913)
3.1
(0.29)
—
2.7
(0.25)
43 7/8"
(1114)
4.8
(0.45)
CR14
—
2.2
(0.20)
—
7 5/16" (186)
43 1/8"
(1095)
3.8
(0.35)
—
3.3
(0.31)
36 11/16"
(932)
5.7
(0.53)
CR145
—
2.4
(0.22)
—
7 5/16" (186)
47 15/16" (1218)
CR15
—
2.8
(0.26)
—
7 5/16" (186)
CR155
—
3.1
(0.29)
—
7 5/16" (186)
CR16
—
3.4
(0.32)
—
7 5/16" (186)
CR23
—
1.6
(0.15)
—
7 5/16" (186)
31 1/16"
(789)
5.4
(0.50)
—
4.7
CR235
—
1.8
(0.17)
—
7 5/16" (186)
35 15/16"
(913)
6.3
(0.59)
—
5.4
CR24
—
2.2
(0.20)
—
7 5/16" (186)
43 1/8"
(1095)
7.6
(0.71)
—
6.5
CR245
—
2.4
(0.22)
—
7 5/16" (186)
47 15/16" (1218)
8.4
(0.78)
—
CR25
—
2.8
(0.26)
—
7 5/16" (186)
(1397)
9.6
(0.89)
—
CR255
—
3.1
(0.29)
—
7 5/16" (186)
59 15/16" (1522)
CR26
—
3.4
(0.32)
—
7 5/16" (186)
4.2
(0.39)
—
3.6
(0.33)
31 7/8"
(810)
6.2
(0.58)
(1397)
4.8
(0.45)
—
4.2
(0.39)
24 13/16"
(630)
7.1
(0.66)
59 15/16" (1522)
5.2
(0.48)
—
4.5
(0.42)
19 7/8"
(505)
7.7
(0.72)
5.9
(0.55)
—
5.1
(0.47)
12 13/16"
(325)
8.5
(0.79)
(0.44)
48 3/4"
(1238)
8.4
(0.78)
(0.50)
43 7/8"
(1114)
9.6
(0.89)
(0.60)
36 11/16"
(932)
11.3
(1.05)
7.3
(0.68)
31 7/8"
(810)
12.4
(1.15)
8.3
(0.77)
24 13/16"
(630)
14.2
(1.32)
55" 67"
55"
(1702)
10.5
(0.98)
—
9.1
(0.85)
19 7/8"
(505)
15.4
(1.43)
67"
(1702)
11.7
(1.09)
—
10.2
(0.95)
12 13/16"
(325)
17.0
(1.58)
CN12
—
1.5
(0.14)
—
10 13/16" (275)
19 1/4"
(489)
2.2
(0.20)
—
1.9
(0.18)
60 9/16"
(1538)
3.4
(0.32)
CN125
—
1.8
(0.17)
—
10 13/16" (275)
23 7/16"
(595)
2.6
(0.24)
—
2.3
(0.21)
56 3/8"
(1432)
4.0
(0.37)
CN13
—
2.3
(0.21)
—
10 13/16" (275)
31 1/16"
(789)
3.5
(0.33)
—
3.1
(0.29)
48 3/4"
(1238)
5.1
(0.47)
CN135
—
2.7
(0.25)
—
10 13/16" (275)
35 15/16"
(913)
4.0
(0.37)
—
3.6
(0.33)
43 7/8"
(1114)
5.8
(0.54)
CN14
—
3.2
(0.30)
—
10 13/16" (275)
43 1/8"
(1095)
4.8
(0.45)
—
4.3
(0.40)
36 11/16"
(932)
6.8
(0.63)
CN145
—
3.6
(0.33)
—
10 13/16" (275)
47 15/16" (1218)
CN15
—
4.1
(0.38)
—
10 13/16" (275)
CN155
—
4.5
(0.42)
—
10 13/16" (275)
6.7
CN16
—
5.0
(0.47)
—
10 13/16" (275)
67"
(1702)
7.5
CN22
—
1.5
(0.14)
—
10 13/16" (275)
19 1/4"
(489)
4.4
CN225
—
1.8
(0.17)
—
10 13/16" (275)
23 7/16"
(595)
CN23
—
2.3
(0.21)
—
10 13/16" (275)
31 1/16"
(789)
CN235
—
2.7
(0.25)
—
10 13/16" (275)
35 15/16"
CN24
—
3.2
(0.30)
—
10 13/16" (275)
43 1/8"
CN245
—
3.6
(0.33)
—
10 13/16" (275)
47 15/16" (1218)
CN25
—
4.1
(0.38)
—
10 13/16" (275)
CN255
—
4.5
(0.42)
—
10 13/16" (275)
CN26
—
5.0
(0.47)
—
10 13/16" (275)
55"
5.4
(0.50)
—
4.8
(0.45)
31 7/8"
(810)
7.5
(0.70)
6.2
(0.58)
—
5.5
(0.51)
24 13/16"
(630)
8.5
(0.79)
(0.62)
—
6.0
(0.56)
19 7/8"
(505)
9.2
(0.86)
(0.70)
—
6.7
(0.62)
12 13/16"
(325)
10.2
(0.95)
(0.41)
—
3.8
(0.35)
60 9/16"
(1538)
6.8
(0.63)
5.2
(0.48)
—
4.6
(0.43)
56 6/16"
(1432)
8.0
(0.74)
7.0
(0.65)
—
6.2
(0.58)
48 3/4"
(1238)
10.2
(0.95)
(913)
8.0
(0.74)
—
7.2
(0.67)
43 7/8"
(1114)
11.5
(1.07)
(1095)
9.7
(0.90)
—
8.6
(0.80)
36 11/16"
(932)
13.6
(1.26)
10.7
(0.99)
—
9.6
(0.89)
31 7/8"
(810)
15.0
(1.39)
12.3
(1.14)
—
11.0
(1.02)
24 13/16"
(630)
16.9
(1.57)
(1397)
59 15/16" (1522)
55"
(1397)
59 15/16" (1522)
13.4
(1.25)
—
12.0
(1.12)
19 7/8"
(505)
18.4
(1.71)
67"
(1702)
15.0
(1.39)
—
13.4
(1.25)
12 13/16"
(325)
20.3
(1.89)
CN32
—
1.5
(0.14)
—
10 13/16" (275)
19 1/4"
(489)
6.6
(0.61)
—
3.8
(0.35)
60 9/16"
(1538)
10.2
(0.95)
CN325
—
1.8
(0.17)
—
10 13/16" (275)
23 7/16"
(595)
7.8
(0.73)
—
4.6
(0.43)
56 3/8"
(1432)
12.0
(1.12)
CN33
—
2.3
(0.21)
—
10 13/16" (275)
31 1/16"
(789)
10.5
(0.98)
—
6.2
(0.58)
48 3/4"
(1238)
15.3
(1.42)
CN335
—
2.7
(0.25)
—
10 13/16" (275)
35 15/16"
(913)
12.0
(1.12)
—
7.2
(0.67)
43 7/8"
(1114)
17.4
(1.62)
CN34
—
3.2
(0.30)
—
10 13/16" (275)
43 1/8"
(1095)
14.4
(1.34)
—
8.6
(0.80)
36 11/16"
(932)
20.4
(1.90)
CN345
—
3.6
(0.33)
—
10 13/16" (275)
47 15/16" (1218)
16.2
(1.51)
—
9.6
(0.89)
31 7/8"
(810)
22.5
(2.09)
CN35
—
4.1
(0.38)
—
10 13/16" (275)
18.6
(1.73)
—
11.0
(1.02)
24 13/16"
(630)
25.5
(2.37)
CN355
—
4.5
(0.42)
—
10 13/16" (275)
CN36
—
5.0
(0.47)
—
10 13/16" (275)
55"
(1397)
59 15/16" (1522)
20.1
(1.87)
—
12.0
(1.11)
19 7/8"
(505)
27.6
(2.57)
67"
(1702)
22.5
(2.09)
—
13.4
(1.24)
12 13/16"
(325)
30.6
(2.84)
C12
2.5
0.23)
1.9
(0.18)
18 5/16" (465)
14 7/16" (367)
19 1/4"
(489)
2.6
(0.24)
2.5
(0.23)
2.4
(0.22)
60 9/16"
(1538)
4.0
(0.37)
C125
3.0
(0.28)
2.4
(0.22)
18 5/16" (465)
14 7/16" (367)
23 7/16"
(595)
3.2
(0.30)
3.0
(0.28)
2.9
(0.27)
56 3/8"
(1432)
4.7
(0.44)
C13
4.0
(0.37)
3.1
(0.29)
18 5/16" (465)
14 7/16" (367)
31 1/16"
(789)
4.3
(0.40)
4.0
(0.37)
3.9
(0.36)
48 3/4"
(1238)
6.0
(0.56)
C135
4.6
(0.43)
3.6
(0.33)
18 5/16" (465)
14 7/16" (367)
35 15/16"
(913)
4.9
(0.46)
4.6
(0.43)
4.5
(0.42)
43 7/8"
(1114)
6.8
(0.63)
C14
5.5
(0.51)
4.3
(0.40)
18 5/16" (465)
14 7/16" (367)
43 1/8"
(1095)
5.9
(0.55)
5.5
(0.51)
5.4
(0.50)
36 11/16"
(932)
8.0
(0.74)
C145
6.1
(0.57)
4.8
(0.45)
18 5/16" (465)
14 7/16" (367)
47 15/16" (1218)
C15
7.0
(0.65)
5.5
(0.51)
18 5/16" (465)
14 7/16" (367)
C155
7.6
(0.71)
6.0
(0.56)
18 5/16" (465)
14 7/16" (367)
C16
8.5
(0.79)
6.7
(0.62)
18 5/16" (465)
14 7/16" (367)
6.6
(0.61)
6.1
(0.57)
6.0
(0.56)
31 7/8"
(810)
8.8
(0.82)
(1397)
7.5
(0.70)
7.0
(0.65)
6.9
(0.64)
24 13/16"
(630)
10.0
(0.93)
59 15/16" (1522)
8.2
(0.76)
7.6
(0.71)
7.5
(0.70)
19 7/8"
(505)
10.9
(1.01)
(325)
12.0
(1.12)
55" 67"
(1702)
9.2
(0.86)
8.5
(0.79)
8.4
(0.78)
12 13/16"
C22
2.5
(0.23)
1.9
(0.18)
18 5/16" (465)
14 7/16" (367)
19 1/4"
(489)
5.2
(0.48)
5.0
(0.46)
4.8
(0.45)
60 9/16"
(1538)
8.0
(0.74)
C225
3.0
(0.28)
2.4
(0.22)
18 5/16" (465)
14 7/16" (367)
23 7/16"
(595)
6.4
(0.59)
6.0
(0.56)
5.8
(0.54)
56 3/8"
(1432)
9.4
(0.87)
C23
4.0
(0.37)
3.1
(0.29)
18 5/16" (465)
14 7/16" (367)
31 1/16"
(789)
8.5
(0.79)
7.9
(0.73)
7.8
(0.73)
48 3/4"
(1238)
12.0
(1.12)
C235
4.6
(0.43)
3.6
(0.33)
18 5/16" (465)
14 7/16" (367)
35 15/16"
(913)
9.9
(0.92)
9.2
(0.86)
9.0
(0.84)
43 7/8"
(1114)
13.6
(1.26)
C24
5.5
(0.51)
4.3
(0.40)
18 5/16" (465)
14 7/16" (367)
43 1/8"
(1095)
11.8
(1.10)
11.0
(1.02)
10.8
(1.00)
36 11/16"
(932)
16.0
(1.49)
C245
6.1
(0.57)
4.8
(0.45)
18 5/16" (465)
14 7/16" (367)
47 15/16" (1218)
13.1
(1.22)
12.2
(1.13)
12.0
(1.12)
31 7/8"
(810)
17.6
(1.64)
C25
7.0
(0.65)
5.5
(0.51)
18 5/16" (465)
14 7/16" (367)
15.1
(1.40)
14.0
(1.30)
13.8
(1.28)
24 13/16"
(630)
20.0
(1.86)
• "Top of Subfloor to Top of Inside Sill Stop" is calculated based upon a structural header height of 6'-10 1/2" (2096). • Dimensions in parentheses are in millimeters or square meters.
55"
(1397)
continued on next page
41
400 Series Casement & Awning Windows
Casement Window Opening and Area Specifications
CASEMENT & AWNING WINDOWS Casement Window Opening and Area Specifications Window Number
Clear Opening Area Straight-Arm Sq. Ft./(m2)
Clear Opening Area Split-Arm Sq. Ft./(m2)
(continued)
Clear Opening in Full Open Position Straight-Arm Split-Arm Width Width Height Inches/(mm) Inches/(mm) Inches/(mm)
C255
7.6
(0.71)
6.0
0.56)
18 5/16"
(465)
14 7/16"
(367)
C26
8.5
(0.79)
6.7
(0.62)
18 5/16"
(465)
14 7/16"
(367)
59 15/16" (1522)
Glass Area Sq. Ft./(m2)
Vent Area Straight-Arm Sq. Ft./(m2)
Vent Area Split-Arm Sq. Ft./(m2)
Top of Subfloor to Top of Inside Sill Stop Inches/(mm)
Overall Window Area Sq. Ft./(m2)
16.4
(1.52)
15.3
(1.42)
15.0
(1.39)
19 7/8"
(505)
21.6
(2.01)
67"
(1702)
18.4
(1.71)
17.1
(1.59)
16.8
(1.56)
12 13/16"
(325)
24.0
(2.23)
C32
2.5
(0.23)
1.9
(0.18)
18 5/16"
(465)
14 7/16"
(367)
19 1/4"
(489)
7.8
(0.73)
5.0
(0.46)
4.8
(0.45)
60 9/16"
(1538)
12.0
(1.12)
C325
3.0
(0.28)
2.4
(0.22)
18 5/16"
(465)
14 7/16"
(367)
23 7/16"
(595)
9.6
(0.89)
6.0
(0.56)
5.8
(0.54)
56 3/8"
(1432)
14.1
(1.31)
C33
4.0
(0.37)
3.1
(0.29)
18 5/16"
(465)
14 7/16"
(367)
31 1/16"
(789)
12.8
(1.19)
7.9
(0.73)
7.8
(0.73)
48 3/4"
(1238)
17.9
(1.66)
C335
4.6
(0.43)
3.6
(0.33)
18 5/16"
(465)
14 7/16"
(367)
35 15/16"
(913)
14.8
(1.38)
9.2
(0.86)
9.0
(0.84)
43 7/8"
(1114)
20.4
(1.90)
C34
5.5
(0.51)
4.3
(0.40)
18 5/16"
(465)
14 7/16"
(367)
43 1/8"
(1095)
17.7
(1.64)
11.0
(1.02)
10.8
(1.00)
36 11/16"
(932)
24.0
(2.23)
C345
6.1
(0.57)
4.8
(0.45)
18 5/16"
(465)
14 7/16"
(367)
47 15/16" (1218)
19.7
(1.83)
12.2
(1.13)
12.0
(1.12)
31 7/8"
(810)
26.4
(2.45)
C35
7.0
(0.65)
5.5
(0.51)
18 5/16"
(465)
14 7/16"
(367)
(630)
29.9
(2.78)
55"
(1397)
22.6
(2.10)
14.0
(1.30)
13.8
(1.28)
24 13/16"
CW12
3.0
(0.28)
2.5
(0.23)
22 9/16"
(573)
18 11/16"
(475)
19 1/4"
(489)
3.2
(0.30)
3.0
(0.28)
3.0
(0.28)
60 9/16"
(1538)
4.8
(0.45)
CW125
3.7
(0.34)
3.0
(0.28)
22 9/16"
(573)
18 11/16"
(475)
23 7/16"
(595)
3.9
(0.36)
3.7
(0.34)
3.6
(0.33)
56 3/8"
(1432)
5.6
(0.52)
CW13
4.9
(0.46)
4.0
(0.37)
22 9/16"
(573)
18 11/16"
(475)
31 1/16"
(789)
5.2
(0.48)
4.9
(0.46)
4.8
(0.45)
48 3/4"
(1238)
7.1
(0.66)
CW135 ◊
5.7
(0.53)
5.1
(0.47)
22 9/16"
(573)
20"
(508)
36 3/8"
(924)
6.0
(0.56)
5.7
(0.53)
5.5
(0.51)
43 7/8"
(1114)
8.0
(0.74)
CW14 ◊
6.8
(0.63)
6.0
(0.56)
22 9/16"
(573)
20"
(508)
43 1/8"
(1095)
7.2
(0.67)
6.8
(0.63)
6.6
(0.61)
36 11/16"
(932)
9.5
(0.88)
CW145 ◊
7.5
(0.70)
6.7
(0.62)
22 9/16"
(573)
20"
(508)
47 15/16" (1218)
8.0
(0.74)
7.5
(0.70)
7.3
(0.68)
31 7/8"
(810)
10.4
(0.97)
CW15 ◊
8.6
(0.80)
7.6
(0.71)
22 9/16"
(573)
20"
(508)
9.2
(0.86)
8.6
(0.80)
8.4
(0.78)
24 13/16"
(630)
11.8
(1.10)
CW155 ◊
9.4
(0.87)
8.3
(0.77)
22 9/16"
(573)
20"
508)
CW16 ◊
10.5
(0.98)
9.3
(0.86)
22 9/16"
(573)
20"
(508)
55"
(1397)
59 15/16" (1522)
10.0
(0.93)
9.4
(0.87)
9.1
(0.85)
19 7/8"
(505)
12.8
(1.19)
67"
(1702)
11.2
(1.04)
10.5
(0.98)
10.2
(0.95)
12 13/16"
(325)
14.2
(1.32)
CW22
3.0
(0.28)
2.5
(0.23)
22 9/16"
(573)
18 11/16"
(475)
19 1/4"
(489)
6.4
(0.59)
6.0
(0.56)
6.0
(0.56)
60 9/16"
(1538)
9.6
(0.89)
CW225
3.7
(0.34)
3.0
(0.28)
22 9/16"
(573)
18 11/16"
(475)
23 7/16"
(595)
7.8
(0.72)
7.4
(0.69)
7.2
(0.67)
56 3/8"
(1432)
11.2
(1.04)
CW23
4.9
(0.46)
4.0
(0.37)
22 9/16"
(573)
18 11/16"
(475)
31 1/16"
(789)
10.4
(0.97)
9.8
(0.91)
9.6
(0.89)
48 3/4"
(1238)
14.1
(1.31)
CW235 ◊
5.7
(0.53)
5.1
(0.47)
22 9/16"
(573)
20"
(508)
36 3/8"
(924)
12.0
(1.12)
11.4
(1.06)
11.1
(1.03)
43 7/8"
(1114)
16.0
(1.49)
CW24 ◊
6.8
(0.63)
6.0
(0.56)
22 9/16"
(573)
20"
(508)
43 1/8"
(1095)
14.4
(1.34)
13.5
(1.25)
13.1
(1.22)
36 11/16"
(932)
18.8
(1.75)
CW245 ◊
7.5
(0.70)
6.7
(0.62)
22 9/16"
(573)
20"
(508)
47 15/16" (1218)
16.0
(1.49)
15.0
(1.39)
14.6
(1.36)
31 7/8"
(810)
20.8
(1.93)
CW25 ◊
8.6
(0.80)
7.6
(0.71)
22 9/16"
(573)
20"
(508)
18.3
(1.70)
17.3
(1.61)
16.7
(1.55)
24 13/16"
(630)
23.5
(2.18)
CW255 ◊
9.4
(0.87)
8.3
(0.77)
22 9/16"
(573)
20"
(508)
CW26 ◊
10.5
(0.98)
9.3
(0.86)
22 9/16"
(573)
20"
(508)
55"
(1397)
59 15/16" (1522) 67"
(1702)
20.0
(1.86)
18.8
(1.75)
18.2
(1.69)
19 7/8"
(505)
25.6
(2.38)
22.3
(2.07)
21.0
(1.95)
20.4
(1.90)
12 13/16"
(325)
28.2
(2.62)
CW32
3.0
(0.28)
2.5
(0.23)
22 9/16"
(573)
18 11/16"
(475)
19 1/4"
(489)
9.6
(0.89)
6.0
(0.56)
6.0
(0.56)
60 9/16"
(1538)
14.4
(1.34)
CW325
3.7
(0.34)
3.0
(0.28)
22 9/16"
(573)
18 11/16"
(475)
23 7/16"
(595)
11.7
(1.09)
7.4
(0.69)
7.2
(0.67)
56 3/8"
(1432)
16.8
(1.56)
CW33
4.9
(0.46)
4.0
(0.37)
22 9/16"
(567)
18 11/16"
(475)
31 1/16"
(789)
15.6
(1.45)
9.8
(0.91)
9.6
(0.89)
48 3/4"
(1238)
21.1
(1.96)
CW335 ◊
5.7
(0.53)
5.1
(0.47)
22 9/16"
(567)
20"
(508)
36 3/8"
(924)
18.0
(1.67)
11.4
(1.06)
11.1
(1.03)
43 7/8"
(1114)
24.0
(2.23)
CW34 ◊
6.8
(0.63)
6.0
(0.56)
22 9/16"
(567)
20"
(508)
43 1/8"
(1095)
21.6
(2.01)
13.6
(1.26)
13.1
(1.22)
36 11/16"
(932)
28.2
(2.62)
CW345 ◊
7.5
(0.70)
6.7
(0.62)
22 9/16"
(567)
20"
(508)
47 15/16" (1218)
24.0
(2.23)
15.0
(1.39)
14.6
(1.36)
31 7/8"
(810)
31.0
(2.88)
CW35 ◊
8.6
(0.80)
7.6
(0.71)
22 9/16"
(567)
20"
(508)
55"
(1397)
27.6
(2.56)
17.2
(1.60)
16.7
(1.55)
24 13/16"
(630)
35.2
(3.27)
CX125
4.2
(0.39)
3.5
(0.33)
25 11/16"
(653)
21 13/16"
(554)
23 7/16"
(595)
4.4
(0.41)
4.2
(0.39)
4.1
(0.38)
56 3/8"
(1432)
6.2
(0.58)
CX13
5.5
(0.52)
4.7
(0.44)
25 11/16"
(653)
21 13/16"
(554)
31 1/16"
(789)
5.9
(0.54)
5.5
(0.52)
5.4
(0.51)
48 3/4"
(1238)
7.9
(0.73)
CX135 ◊
6.4
(0.60)
5.4
(0.51)
25 11/16"
(653)
21 13/16"
(554)
35 15/16"
(913)
6.8
(0.63)
6.4
(0.60)
6.3
(0.59)
43 7/8"
(1114)
8.9
(0.83)
CX14 ◊
7.7
(0.72)
6.5
(0.61)
25 11/16"
(653)
21 13/16"
(554)
43 1/8"
(1095)
8.1
(0.76)
7.7
(0.72)
7.6
(0.70)
36 11/16"
(932)
10.5
(0.98)
CX145 ◊
8.6
(0.80)
7.3
(0.67)
25 11/16"
(653)
21 13/16"
(554)
47 15/16" (1218)
9.0
(0.84)
8.6
(0.80)
8.4
(0.78)
31 7/8"
(810)
11.6
(1.07)
CX15 ◊
9.8
(0.91)
8.3
(0.77)
25 11/16"
(653)
21 13/16"
(554)
10.4
(0.96)
9.8
(0.91)
9.7
(0.90)
24 13/16"
(630)
13.1
(1.22)
CX155 ◊
10.7
(0.99)
9.1
(0.84)
25 11/16"
(653)
21 13/16"
(554)
CX16 ◊
12.0
(1.11)
10.1
(0.94)
25 11/16"
(653)
21 13/16"
(554)
55"
(1397)
59 15/16" (1522) 67"
(1702)
11.3
(1.05)
10.7
(0.99)
10.5
(0.98)
19 7/8"
(505)
14.2
(1.32)
12.6
(1.17)
12.0
(1.11)
11.8
(1.09)
12 13/16"
(325)
15.7
(1.46)
CX23
5.5
(0.52)
4.7
(0.44)
25 11/16"
(653)
21 13/16"
(554)
31 1/16"
(789)
11.7
(1.09)
11.1
(1.03)
10.9
(1.01)
48 3/4"
(1238)
15.7
(1.46)
CX235 ◊
6.4
(0.60)
5.4
(0.51)
25 11/16"
(653)
21 13/16"
(554)
35 15/16"
(913)
13.6
(1.26)
12.8
(1.19)
12.6
(1.17)
43 7/8"
(1114)
17.8
(1.65)
CX24 ◊
7.7
(0.72)
6.5
(0.61)
25 11/16"
(653)
21 13/16"
(554)
43 1/8"
(1095)
16.3
(1.51)
15.4
(1.43)
15.1
(1.41)
36 11/16"
(932)
20.9
(1.94)
CX245 ◊
8.6
(0.80)
7.3
(0.67)
25 11/16"
(653)
21 13/16"
(554)
47 15/16" (1218)
18.1
(1.68)
17.1
(1.59)
16.8
(1.56)
31 7/8"
(810)
23.0
(2.14)
CX25 ◊
9.8
(0.91)
8.3
(0.77)
25 11/16"
(653)
21 13/16"
(554)
20.7
(1.93)
19.6
(1.82)
19.3
(1.79)
24 13/16"
(630)
26.1
(2.42)
55"
(1397)
CXW13 ◊
6.5
(0.60)
5.6
(0.53)
30 1/8"
(765)
26 1/4"
(667)
31 1/16"
(789)
6.8
(0.63)
6.5
(0.60)
6.1
(0.57)
48 3/4"
(1238)
9.0
(0.84)
CXW135 ◊
7.5
(0.70)
6.6
(0.61)
30 1/8"
(765)
26 1/4"
(667)
35 15/16"
(913)
7.9
(0.73)
7.5
(0.70)
7.0
(0.65)
43 7/8"
(1114)
10.2
(0.95)
CXW14 ◊
9.0
(0.84)
7.9
(0.73)
30 1/8"
(765)
26 1/4"
(667)
43 1/8"
(1095)
9.5
(0.88)
9.0
(0.84)
8.4
(0.78)
36 11/16"
(932)
12.0
(1.12)
CXW145 ◊
10.0
(0.93)
8.8
(0.82)
30 1/8"
(765)
26 1/4"
(667)
47 15/16" (1218)
10.5
(0.98)
10.0
(0.93)
9.4
(0.87)
31 7/8"
(810)
13.2
(1.23)
CXW15 ◊
11.5
(1.07)
—
30 1/8"
(765)
—
12.1
(1.12)
11.5
(1.07)
24 13/16"
(630)
14.9
(1.38)
CXW155 ◊
12.6
(1.17)
—
30 1/8"
(765)
—
CXW16 ◊
14.0
(1.30)
—
30 1/8"
(765)
—
55"
(1397)
59 15/16" (1522)
—
13.1
(1.22)
12.6
(1.17)
—
19 7/8"
(505)
16.2
(1.51)
67"
(1702)
14.7
(1.37)
14.0
(1.30)
—
12 13/16"
(325)
17.9
(1.66)
CXW23
6.5
(0.60)
5.6
(0.53)
30 1/8"
(765)
26 1/4"
(667)
31 1/16"
(789)
13.6
(1.26)
13.0
(1.21)
12.2
(0.57)
48 3/4"
(1238)
17.9
(1.66)
CXW235 ◊
7.5
(0.70)
6.5
(0.61)
30 1/8"
(765)
26 1/4"
(667)
35 5/16"
(913)
15.8
(1.47)
15.0
(1.39)
14.0
(0.57)
43 7/8"
(1114)
20.3
(1.89)
CXW24 ◊
9.0
(0.84)
7.9
(0.73)
30 1/8"
(765)
26 1/4"
(667)
43 1/8"
(1059)
19.0
(1.77)
18.0
(1.67)
16.8
(0.57)
36 11/16"
(932)
23.9
(2.22)
CXW245 ◊
10.0
(0.93)
8.7
(0.81)
30 1/8"
(765)
26 1/4"
(667)
47 15/16" (1218)
21.0
(1.95)
20.0
(1.86)
18.8
(0.57)
31 7/8"
(810)
26.3
(2.44)
CXW25 ◊
11.5
(1.07)
30 1/8"
(765)
24.2
(2.25)
23.0
(2.14)
24 13/16"
(630)
29.8
(2.77)
—
—
55"
(1397)
—
• "Top of Subfloor to Top of Inside Sill Stop" is calculated based upon a structural header height of 6'-10 1/2" (2096). • Dimensions in parentheses are in millimeters or square meters. ◊Meet or exceed clear opening area of 5.7 sq. ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610) with appropriate hardware, straight- or split-arm operator, specified.
42
Picture Window Area Specifications
Clear Opening in Full Open Position Window Number
Clear Opening Area Sq. Ft./(m2)
Width Inches/(mm)
Depth Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Area Sq. Ft./(m2)
Top of Subfloor to Top of Inside Sill Stop Inches/(mm)
Overall Window Area Sq. Ft./(m2)
Window Number
Glass Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2)
AR21
0.9
(0.08)
19 1/2"
(495)
6 3/8"
(162)
1.7
(0.16)
0.9
(0.08)
67 7/16" (1713)
2.8
0.26)
P3030
6.8
(0.63)
9.0
(0.84)
AR251
1.1
(0.10)
23 3/4"
(603)
6 3/8"
(162)
2.0
(0.19)
1.1
(0.10)
67 7/16" (1713)
3.3
(0.31)
P3035
7.8
(0.73)
10.2
(0.95)
AR281
1.2
(0.11)
26 7/8"
(683)
6 3/8"
(162)
2.3
(0.21)
1.2
(0.11)
67 7/16" (1713)
3.7
(0.34)
P3040
9.4
(0.87)
12.0
(1.12)
AR31
1.4
(0.13)
31 5/16"
(795)
6 3/8"
(162)
2.7
(0.25)
1.4
(0.13)
67 7/16" (1713)
4.2
(0.39)
P3045
10.4
(0.97)
13.2
(1.23)
AR351
1.6
(0.15)
36 3/16"
(919)
6 3/8"
(162)
3.1
(0.29)
1.6
(0.15)
67 7/16" (1713)
4.8
(0.45)
P3050
12.0
(1.12)
14.9
(1.38)
AR41
1.9
(0.18)
43 3/8"
(1102)
6 3/8"
(162)
3.8
(0.35)
1.9
(0.18)
67 7/16" (1713)
5.7
(0.53)
P3055
13.0
(1.21)
16.2
(1.51)
AR451
2.1
(0.20)
48 3/16" (1224)
6 3/8"
(162)
4.2
(0.39)
2.1
(0.20)
67 7/16" (1713)
6.2
(0.58)
P3060
14.6
(1.36)
17.9
(1.66)
AR51
2.5
(0.23)
55 1/2"
(1410)
6 3/8"
(162)
4.8
(0.45)
2.5
(0.23)
67 7/16" (1713)
7.1
(0.66)
P3530
7.8
(0.73)
10.2
(0.95)
AR551
2.7
(0.25)
60 3/16" (1529)
6 3/8"
(162)
5.2
(0.48)
2.7
(0.25)
67 7/16" (1713)
7.7
(0.72)
P3535
9.0
(0.84)
11.6
(1.08)
AR61
3.0
(0.28)
67 1/2"
(1715)
6 3/8"
(162)
5.9
(0.55)
3.0
(0.28)
67 7/16" (1713)
8.5
(0.79)
P3540
10.8
(1.00)
13.6
(1.26)
AR221
0.9
(0.08)
19 1/2"
(495)
6 3/8"
(162)
3.4
(0.32)
1.7
(0.16)
67 7/16" (1713)
5.6
(0.52)
P3545
12.1
(1.12)
15.0
(1.39)
AR2251
1.1
(0.10)
23 3/4"
(603)
6 3/8"
(162)
4.0
(0.37)
2.1
(0.20)
67 7/16" (1713)
6.6
(0.61)
P3550
13.8
(1.28)
17.0
(1.58)
AR2281
1.2
(0.11)
26 7/8"
(683)
6 3/8"
(162)
4.6
(0.43)
2.4
(0.22)
67 7/16" (1713)
7.4
(0.69)
P3555
15.1
(1.40)
18.4
(1.71)
AR231
1.4
(0.13)
31 5/16"
(795)
6 3/8"
(162)
5.4
(0.50)
2.8
(0.26)
67 7/16" (1713)
8.4
(0.78)
P3560
16.8
(1.56)
20.4
(1.90)
AR321
0.9
(0.08)
19 1/2"
(495)
6 3/8"
(162)
5.1
(0.47)
2.6
(0.24)
67 7/16" (1713)
8.4
(0.78)
P4030
9.4
(0.87)
12.0
(1.12)
AR3251
1.1
(0.10)
23 3/4"
(603)
6 3/8"
(162)
6.0
(0.56)
3.2
(0.29)
67 7/16" (1713)
9.9
(0.92)
P4035
10.8
(1.00)
13.6
(1.26)
AN21
0.9
(0.08)
19 1/2"
(495)
6 7/16"
(164)
2.2
(0.20)
0.9
(0.08)
63 15/16" (1624)
3.4
(0.32)
P4040
13.0
(1.21)
16.0
(1.49)
AN251
1.1
(0.10)
23 3/4"
(603)
6 7/16"
(164)
2.6
(0.24)
1.1
(0.10)
63 15/16" (1624)
4.0
(0.37)
P4045
14.5
(1.35)
17.6
(1.64)
AN281
1.2
(0.11)
26 7/8"
(683)
6 7/16"
(164)
3.0
(0.28)
1.2
(0.11)
63 15/16" (1624)
4.5
(0.42)
P4050
16.6
(1.54)
20.0
(1.86)
AN31
1.4
(0.13)
31 5/16"
(795)
6 7/16"
(164)
3.5
(0.33)
1.4
(0.13)
63 15/16" (1624)
5.1
(0.47)
P4055
18.1
(1.68)
21.6
(2.01)
AN351
1.6
(0.15)
36 3/16"
(919)
6 7/16"
(164)
4.0
(0.37)
1.6
(0.15)
63 15/16" (1624)
5.8
(0.54)
P4060
20.2
(1.88)
24.0
(2.23)
AN41
1.9
(0.18)
43 3/8"
(1102)
6 7/16"
(164)
4.8
(0.45)
1.9
(0.18)
63 15/16" (1624)
6.8
(0.63)
P4530
10.4
(0.97)
13.2
(1.23)
AN451
2.2
(0.20)
48 3/16" (1224)
6 7/16"
(164)
5.4
(0.50)
2.2
(0.20)
63 15/16" (1624)
7.5
(0.70)
P4535
12.1
(1.12)
15.0
(1.39)
AN51
2.5
(0.23)
55 1/2"
(1410)
6 7/16"
(164)
6.2
(0.58)
2.5
(0.23)
63 15/16" (1624)
8.5
(0.79)
P4540
14.5
(1.35)
17.6
(1.64)
AN551
2.7
(0.25)
60 3/16" (1529)
6 7/16"
(164)
6.7
(0.62)
2.7
(0.25)
63 15/16" (1624)
9.2
(0.86)
P4545
16.1
(1.50)
19.4
(1.80)
AN61
3.0
(0.28)
67 1/2"
(1715)
6 7/16"
(164)
7.5
(0.70)
3.0
(0.28)
63 15/16" (1624)
10.2
(0.95)
P4550
18.4
(1.71)
22.0
(2.04)
AN221
0.9
(0.08)
19 1/2"
(495)
6 7/16"
(164)
4.4
(0.41)
1.7
(0.16)
63 15/16" (1624)
6.8
(0.63)
P4555
20.1
(1.87)
23.8
(2.21)
AN2251
1.1
(0.10)
23 3/4"
(603)
6 7/16"
(164)
5.2
(0.48)
2.1
(0.20)
63 15/16" (1624)
8.0
(0.74)
P4560
22.4
(2.08)
26.4
(2.45)
AN2281
1.2
(0.11)
26 7/8"
(683)
6 7/16"
(164)
6.0
(0.56)
2.4
(0.22)
63 15/16" (1624)
9.0
(0.84)
P5030
12.0
(1.12)
14.9
(1.38)
AN231
1.4
(0.13)
31 5/16"
(795)
6 7/16"
(164)
7.0
(0.65)
2.8
(0.26)
63 15/16" (1624)
10.2
(0.95)
P5035
13.8
(1.28)
17.0
(1.58)
AN321
0.9
(0.08)
19 1/2"
(495)
6 7/16"
(164)
6.6
(0.61)
2.6
(0.24)
63 15/16" (1624)
10.2
(0.95)
P5040
16.6
(1.54)
20.0
(1.86)
AN3251
1.1
(0.10)
23 3/4"
(603)
6 7/16"
(164)
7.8
(0.73)
3.2
(0.30)
63 15/16" (1624)
12.0
(1.12)
P5045
18.4
(1.71)
22.0
(2.04)
A21
0.9
(0.08)
19 1/2"
(495)
6 1/2"
(165)
2.6
(0.24)
0.9
(0.08)
60 5/16" (1532)
4.0
(0.37)
P5050
21.1
(1.96)
24.9
(2.31)
A251
1.1
(0.10)
23 3/4"
(603)
6 1/2"
(165)
3.2
(0.30)
1.1
(0.10)
60 5/16" (1532)
4.8
(0.45)
P5055
23.0
(2.14)
26.9
(2.50)
A281
1.2
(0.11)
26 7/8"
(683)
6 1/2"
(165)
3.7
(0.34)
1.2
(0.11)
60 5/16" (1532)
5.3
(0.49)
P5060
25.7
(2.39)
29.9
(2.78)
A31
1.4
(0.13)
31 5/16"
(795)
6 1/2"
(165)
4.3
(0.40)
1.4
(0.13)
60 5/16" (1532)
6.0
(0.56)
P5530
13.0
(1.21)
16.2
(1.51)
A351
1.6
(0.15)
36 3/16"
(919)
6 1/2"
(165)
4.9
(0.46)
1.6
(0.15)
60 5/16" (1532)
6.8
(0.63)
P5535
15.1
(1.40)
18.4
(1.71)
A41
2.0
(0.18)
43 3/8"
(1102)
6 1/2"
(165)
5.9
(0.55)
2.0
(0.18)
60 5/16" (1532)
8.0
(0.74)
P5540
18.1
(1.68)
21.6
(2.01)
A451
2.2
(0.20)
48 3/16" (1224)
6 1/2"
(165)
6.6
(0.61)
2.2
(0.20)
60 5/16" (1532)
8.8
(0.82)
P5545
20.1
(1.87)
23.8
(2.21)
A51
2.5
(0.23)
55 1/2"
(1410)
6 1/2"
(165)
7.5
(0.70)
2.5
(0.23)
60 5/16" (1532)
10.0
(0.93)
P5550
23.0
(2.14)
26.9
(2.50)
A551
2.7
(0.25)
60 3/16" (1529)
6 1/2"
(165)
8.2
(0.76)
2.7
(0.25)
60 5/16" (1532)
10.9
(1.01)
P6030
14.6
(1.36)
17.9
(1.66)
A61
3.0
(0.28)
67 1/2"
(1715)
6 1/2"
(165)
9.2
(0.86)
3.0
(0.28)
60 5/16" (1532)
12.0
(1.12)
P6035
16.8
(1.56)
20.4
(1.90)
A221
0.9
(0.08)
19 1/2"
(495)
6 1/2"
(165)
5.2
(0.48)
1.8
(0.16)
60 5/16" (1532)
8.0
(0.74)
P6040
20.2
(1.88)
24.0
(2.23)
A2251
1.1
(0.10)
23 3/4"
(603)
6 1/2"
(165)
6.4
(0.60)
2.1
(0.20)
60 5/16" (1532)
9.6
(0.89)
P6045
22.4
(2.08)
26.4
(2.45)
A2281
1.2
(0.11)
26 7/8"
(683)
6 1/2"
(165)
7.4
(0.69)
2.4
(0.23)
60 5/16" (1532)
10.6
(0.99)
P6050
25.7
(2.39)
29.9
(2.78)
A231
1.4
(0.13)
31 5/16"
(795)
6 1/2"
(165)
8.6
(0.80)
2.8
(0.26)
60 5/16" (1532)
12.0
(1.12)
A321
0.9
(0.08)
19 1/2"
(495)
6 1/2"
(165)
7.8
(0.73)
2.6
(0.25)
60 5/16" (1532)
12.0
(1.12)
A3251
1.1
(0.10)
23 3/4"
(603)
6 1/2"
(165)
9.6
(0.89)
3.2
(0.30)
60 5/16" (1532)
14.4
(1.34)
AW21
0.9
(0.08)
19 1/2"
(495)
6 1/2"
(165)
3.2
(0.30)
0.9
(0.08)
56 1/16" (1424)
4.8
(0.45)
AW251
1.1
(0.10)
23 3/4"
(603)
6 1/2"
(165)
3.9
(0.36)
1.1
(0.10)
56 1/16" (1424)
5.6
(0.52)
AW281
1.2
(0.11)
26 7/8"
(683)
6 1/2"
(165)
4.4
(0.41)
1.2
(0.11)
56 1/16" (1424)
6.2
(0.58)
AW31
1.4
(0.13)
31 5/16"
(795)
6 1/2"
(165)
5.2
(0.48)
1.4
(0.13)
56 1/16" (1424)
7.1
(0.66)
AW351
1.6
(0.15)
36 3/16"
(919)
6 1/2"
(165)
6.0
(0.56)
1.6
(0.15)
56 1/16" (1424)
8.0
(0.74)
AW41
2.0
(0.18)
43 3/8"
(1102)
6 1/2"
(165)
7.2
(0.67)
2.0
(0.18)
56 1/16" (1424)
9.5
(0.88)
AW451
2.2
(0.20)
48 3/16" (1224)
6 1/2"
(165)
8.0
(0.74)
2.2
(0.20)
56 1/16" (1424)
10.4
(0.97)
AW51
2.5
(0.23)
55 1/2"
(1410)
6 1/2"
(165)
9.2
(0.86)
2.5
(0.23)
56 1/16" (1424)
11.8
(1.10)
AW551
2.7
(0.25)
60 3/16" (1529)
6 1/2"
(165)
10.0
(0.93)
2.7
(0.25)
56 1/16" (1424)
12.8
(1.19)
AW61
3.0
(0.28)
67 1/2"
(1715)
6 1/2"
(165)
11.2
(1.04)
3.0
(0.28)
56 1/16" (1424)
14.2
(1.32)
AW221
0.9
(0.08)
19 1/2"
(495)
6 1/2"
(165)
6.4
(0.60)
1.8
(0.16)
56 1/16" (1424)
9.6
(0.89)
AW2251
1.1
(0.10)
23 3/4"
(603)
6 1/2"
(165)
7.8
(0.73)
2.1
(0.20)
56 1/16" (1424)
11.2
(1.04)
• "Top of Subfloor to Top of Inside Sill Stop" is calculated based upon a structural header height of 6'-10 1/2" (2096). • Dimensions in parentheses are in millimeters or square meters.
• Dimensions in parentheses are in square meters.
continued on next page
43
400 Series Casement & Awning Windows
Awning Window Opening and Area Specifications
CASEMENT & AWNING WINDOWS Awning Window Opening and Area Specifications
Transom Window Area Specifications
(continued)
Clear Opening in Full Open Position Window Number
Clear Opening Area Sq. Ft./(m2)
Width Inches/(mm)
Depth Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Area Sq. Ft./(m2)
Top of Subfloor to Top of Inside Sill Stop Inches/(mm)
Overall Window Area Sq. Ft./(m2)
Window Number
Glass Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2)
AW2281
1.2
(0.11)
26 7/8"
683)
6 1/2"
(165)
8.8
(0.82)
2.4
(0.23)
56 1/16" (1424)
12.4
(1.15)
CTR1510
0.7
(0.07)
1.4
(0.13)
AW231
1.4
(0.13)
31 5/16"
(795)
6 1/2"
(165)
10.4
(0.97)
2.8
(0.26)
56 1/16" (1424)
14.2
(1.32)
CTR1810
0.8
(0.07)
1.7
(0.16)
AW321
0.9
(0.08)
19 1/2"
(495)
6 1/2"
(165)
9.6
(0.89)
2.6
(0.25)
56 1/16" (1424)
14.4
(1.34)
CTR21810
1.7
(0.16)
3.4
(0.32)
AW3251
1.1
(0.10)
23 3/4"
(603)
6 1/2"
(165)
11.7
(1.09)
3.2
(0.30)
56 1/16" (1424)
16.8
(1.56)
CTR31810
2.6
(0.24)
5.1
(0.47)
AX251
1.1
(0.10)
23 3/4"
(603)
6 1/2"
(165)
4.4
(0.41)
1.1
(0.10)
53 15/16" (1370)
6.2
(0.58)
CTR2010
1.0
(0.09)
2.0
(0.19)
AX281
1.2
(0.11)
26 7/8"
(683)
6 1/2"
(165)
5.0
(0.47)
1.2
(0.11)
53 15/16" (1370)
6.9
(0.64)
CTR22010
2.1
(0.19)
4.0
(0.37)
AX31
1.4
(0.13)
31 5/16"
(795)
6 1/2"
(165)
5.9
(0.54)
1.4
(0.13)
53 15/16" (1370)
7.9
(0.73)
CTR32010
3.1
(0.29)
6.0
(0.56)
AX351
1.6
(0.15)
36 3/16"
(919)
6 1/2"
(165)
6.8
(0.63)
1.6
(0.15)
53 15/16" (1370)
8.9
(0.83)
CTR2410
1.2
(0.11)
2.4
(0.22)
AX41
2.0
(0.18)
43 3/8"
(1102)
6 1/2"
(165)
8.1
(0.76)
2.0
(0.18)
53 15/16" (1370)
10.5
(0.98)
CTR22410
2.5
(0.24)
4.7
(0.44)
AX451
2.2
(0.20)
48 3/16" (1224)
6 1/2"
(165)
9.0
(0.84)
2.2
(0.20)
53 15/16" (1370)
11.6
(1.07)
CTR32410
3.8
(0.35)
7.1
(0.66)
AX51
2.5
(0.23)
55 1/2"
(1410)
6 1/2"
(165)
10.4
(0.96)
2.5
(0.23)
53 15/16" (1370)
13.1
(1.22)
CTR2810
1.4
(0.13)
2.6
(0.24)
AX551
2.7
(0.25)
60 3/16" (1529)
6 1/2"
(165)
11.3
(1.05)
2.7
(0.25)
53 15/16" (1370)
14.2
(1.32)
CTR22810
2.9
(0.27)
5.2
(0.49)
AX61
3.0
(0.28)
67 1/2"
(1715)
6 1/2"
(165)
12.6
(1.17)
3.0
(0.28)
53 15/16" (1370)
15.7
(1.46)
CTR3010
1.6
(0.15)
3.0
(0.28)
AX2251
1.1
(0.10)
23 3/4"
(603)
6 1/2"
(165)
8.9
(0.82)
2.1
(0.20)
53 15/16" (1370)
12.4
(1.15)
CTR23010
3.3
(0.31)
6.0
(0.55)
AX2281
1.2
(0.11)
26 7/8"
(683)
6 1/2"
(165)
10.0
(0.93)
2.4
(0.23)
53 15/16" (1370)
13.8
(1.28)
CTR5110
2.8
(0.26)
5.1
(0.47)
AX231
1.4
(0.13)
31 5/16"
(795)
6 1/2"
(165)
11.7
(1.09)
2.8
(0.26)
53 15/16" (1370)
15.7
(1.46)
CTR2910
1.5
(0.14)
2.8
(0.26)
AX3251
1.1
(0.10)
23 3/4"
(603)
6 1/2"
(165)
13.3
(1.24)
3.2
(0.30)
53 15/16" (1370)
18.6
(1.73)
CTR3410
1.8
(0.17)
3.4
(0.32)
AXW281
1.2
(0.11)
26 7/8"
(683)
6 1/2"
(165)
5.8
(0.54)
1.2
(0.11)
48 1/2"
(1232)
7.9
(0.73)
CTR4010
2.2
(0.20)
4.0
(0.37)
AXW31
1.4
(0.13)
31 5/16"
(795)
6 1/2"
(165)
6.8
(0.63)
1.4
(0.13)
48 1/2"
(1232)
9.0
(0.84)
CTR4810
2.6
(0.24)
4.7
(0.44)
AXW351
1.6
(0.15)
36 3/16"
(919)
6 1/2"
(165)
7.9
(0.73)
1.6
(0.15)
48 1/2"
(1232)
10.2
(0.95)
CTR5210
2.9
(0.27)
5.2
(0.48)
AXW41
2.0
(0.18)
43 3/8"
(1102)
6 1/2"
(165)
9.5
(0.88)
2.0
(0.18)
48 1/2"
(1232)
12.0
(1.12)
CTR51110
3.4
(0.32)
6.0
(0.56)
AXW451
2.2
(0.20)
48 3/16" (1224)
6 1/2"
(165)
10.5
(0.98)
2.2
(0.20)
48 1/2"
(1232)
13.2
(1.23)
CTR6010
3.4
(0.32)
6.0
(0.56)
AXW51
2.5
(0.23)
55 1/2"
(1410)
6 1/2"
(165)
12.1
(1.12)
2.5
(0.23)
48 1/2"
(1232)
14.9
(1.38)
CTR7010
4.0
(0.37)
7.1
(0.66)
AXW551
2.7
(0.25)
60 3/16" (1529)
6 1/2"
(165)
13.1
(1.22)
2.7
(0.25)
48 1/2"
(1232)
16.2
(1.51)
PTR3010
1.6
(0.15)
3.0
(0.28)
AXW61
3.0
(0.28)
67 1/2"
(1715)
6 1/2"
(165)
14.7
(1.37)
3.0
(0.28)
48 1/2"
(1232)
17.9
(1.66)
PTR3510
1.8
(0.17)
3.4
(0.32)
AXW2281
1.2
(0.11)
26 7/8"
(683)
6 1/2"
(165)
11.6
(1.08)
2.4
(0.23)
48 1/2"
(1232)
15.8
(1.47)
PTR4010
2.2
(0.20)
4.0
(0.37)
AXW231
1.4
(0.13)
31 3/8"
(795)
6 1/2"
(165)
13.6
(1.26)
2.8
(0.26)
48 1/2"
(1232)
18.0
(1.67)
PTR4510
2.4
(0.22)
4.4
(0.41)
A335*
1.4
(0.13)
31 5/16"
(795)
6 1/2"
(676)
7.0
(0.65)
1.3
(0.12)
43 11/16" (1110)
10.2
(0.95)
PTR5010
2.8
(0.26)
5.0
(0.47)
A3535
1.6
(0.14)
36 3/16"
(943)
6 1/2"
(165)
8.1
(0.75)
1.6
(0.15)
43 11/16" (1110)
11.5
(1.07)
PTR5510
3.0
(0.28)
5.4
(0.50)
AP32V
1.4
(0.12)
31 5/16"
(795)
6 1/2"
(165)
9.4
(0.87)
1.4
(0.13)
36 7/16"
(926)
12.0
(1.12)
PTR6010
3.4
(0.32)
6.0
(0.56)
AP352V
1.6
(0.14)
36 3/16"
(919)
6 1/2"
(165)
10.9
(1.01)
1.6
(0.15)
36 7/16"
(926)
13.6
(1.26)
AP42V
2.0
(0.17)
43 3/8"
(1102)
6 1/2"
(165)
13.1
(1.22)
2.0
(0.18)
36 7/16"
(926)
16.0
(1.49)
A212
0.9
(0.08)
19 1/2"
(495)
6 1/2"
(165)
5.2
(0.48)
1.8
(0.16)
60 5/16" (1532)
8.0
(0.74)
A213
0.9
(0.08)
19 1/2"
(495)
6 1/2"
(165)
7.8
(0.73)
2.6
(0.25)
60 5/16" (1532)
12.0
(1.12)
A312
1.4
(0.13)
31 5/16"
(795)
6 1/2"
(165)
8.6
(0.80)
2.8
(0.26)
60 5/16" (1532)
12.0
(1.12)
A313
1.4
(0.13)
31 5/16"
(795)
6 1/2"
(165)
12.9
(1.20)
4.2
(0.39)
60 5/16" (1532)
18.0
(1.67)
PA3050**
1.4
(0.13)
31 5/16"
(795)
6 1/2"
(165)
4.3
(0.40)
1.4
(0.13)
60 5/16" (1532)
6.0
(0.56)
PA3060**
1.4
(0.13)
31 5/16"
(795)
6 1/2"
(165)
4.3
(0.40)
1.4
(0.13)
60 5/16" (1532)
6.0
(0.56)
PA3550**
1.6
(0.15)
36 3/16"
(919)
6 1/2"
(165)
4.9
(0.46)
1.6
(0.15)
60 5/16" (1532)
6.8
(0.63)
PA3560**
1.6
(0.15)
36 3/16"
(919)
6 1/2"
(165)
4.9
(0.46)
1.6
(0.15)
60 5/16" (1532)
6.8
(0.63)
PA4060**
2.0
(0.18)
43 3/8"
(1102)
6 1/2"
(165)
5.9
(0.55)
2.0
(0.18)
60 5/16" (1532)
8.0
(0.74)
AXW312
1.4
(0.13)
31 1/3"
(795)
6 1/2"
(165)
13.6
(1.26)
2.8
(0.26)
48 1/2"
18.0
(1.67)
(1232)
• "Top of Subfloor to Top of Inside Sill Stop" is calculated based upon a structural header height of 6'-10 1/2" (2096). • Dimensions in parentheses are in millimeters or square meters. *Clear opening area of 5.8 sq. ft. or 0.54 m2 and clear opening height of 26 1/2" (673) can be obtained by detaching operator from sash. **Dimensions and calculations are for bottom venting sash.
44
• Dimensions in parentheses are in square meters.
400 Series Casement & Awning Windows
Custom Sizes and Specification Formulas Casement Windows (stationary & venting) 17" to 35 15 ⁄ 16" (432) (913)
Available in 1 ⁄ 8" (3) increments between minimum and maximum widths and heights. Windows can also be custom sized to match standard sizes ending in a sixteenth of an inch. Some restrictions apply, contact your Andersen supplier. Custom sizing is available for single windows only. To achieve custom-size 2- or 3-wide combinations, join custom-size single windows. For
CUSTOM HEIGHTS
24 1 ⁄ 8" to 71 7 ⁄ 8" (613) (1826)
CUSTOM WIDTHS
Clear Opg.
minimum rough opening dimensions for joined windows, see specific joining instruction guides. Measurement guide for custom sized windows can be found at andersenwindows.com/measure.
Width
= window width − 5.81" (148) = (window width − 9.66" (245)) X 1.07 = window width − 9.70" (246)
Width
Width
= window width + 1/2" (13)
Height = window height + 1/2" (13)
= window height − 4.85" (123)
Height ≥ 40 13 /16" (1037) and < 48" (1219); Width ≥ 28 3 /8" (721) and < 31 1 /2" (800) All other window heights
= window width − 5.81" (148) = window width − 6.10" (155)
Width ≥ 24 1 /8" (613) with straight-arm operator Width ≥ 17" (432) with split-arm operator
Height = window height − 4.43" (113)
Vent Opg.
Min.R.O.
Width ≥ 24 1 /8" (613) with straight-arm operator Width ≥ 28 3 /8" (721) with split-arm operator & control bracket Width ≥ 17" (432) with split-arm operator
Unobst. Gls.
Width
= window width − 4.40" (112)
Height = window height − 4.95" (126)
Height ≥ 40 13 /16" (1037) and < 48" (1219); Width ≥ 28 3 /8" (721) and < 31 1 /2" (800) All other window heights
Height = window height − 4.43" (113)
= window height − 4.85" (123)
CUSTOM WIDTHS
CUSTOM WIDTHS
CUSTOM WIDTHS
Clear Opg.
Width
Unobst. Gls.
= window width − 4.53" (115)
Height ≥ 17" (432) and < 20 1 /2" (521)
Width
= window width − 4.81" (122)
Height = window height − 4.51" (115)
Height ≥ 20 1 /2" (521) and < 24 1 /8" (613) All other window heights
= 6.44" (164) = 6.50" (165)
Casement/Awning Picture and Transom Windows
17" to 84 5 ⁄ 8" (432) (2150)
Casement Transom (CTR) Picture Transom (PTR)
60" to 71 7 ⁄ 8" (1524) (1826)
36" to 71 7 ⁄ 8" (1826) (914)
CUSTOM WIDTHS
CUSTOM WIDTHS
CUSTOM WIDTHS
CUSTOM HEIGHTS
35 15 ⁄ 16" to 59 7 ⁄ 8" (913) (1521)
36" to 59 7 ⁄ 8" (914) (1521)
CUSTOM HEIGHTS
= window width + 1/2" (13)
Height ≥ 20 1 /2" (521) and < 24 1 /8" (613) All other window heights
Height = 6.38" (162)
36" to 71 7 ⁄ 8" (914) (1826)
Width
Height = window height + 1/2" (13)
Height ≥ 17" (432) and < 20 1 /2" (521)
= 6.44" (164) = 6.50" (165) Width
CUSTOM HEIGHTS
Min.R.O.
= window width − 4.53" (115)
Height = 6.38" (162)
Vent Opg.
CUSTOM HEIGHTS
48 1 ⁄ 8" to 71 7 ⁄ 8" (1222) (1826)
17" to 35 15 ⁄ 16" (432) (913)
24 1 ⁄ 8" to 48" (613) (1219)
17" to 48" (432) (1219)
24 1 ⁄ 8" to 71 7 ⁄ 8" (613) (1826)
CUSTOM HEIGHTS
17" to 35 15 ⁄ 16" (432) (913)
Awning Windows (stationary & venting)
12" (305) height only
Min.R.O.
Width
= window width − 1/2" (13)
Height = window height − 1/2" (13)
Unobst. Gls.
Width
= window width − 4.80" (122)
Height = window height − 4.80" (122)
• Dimensions in parentheses are in millimeters. • Clear Opg. (clear opening) formulas provide dimensions for determining area available for egress. Vent Opg. (vent opening) formulas provide dimensions for determining area available for passage of air. Min. R.O. (minimum rough opening) formulas provide minimum rough opening width and height dimensions. Unobstr. Gls. (unobstructed glass) formulas provide dimensions for determining area available for passage of light. • Refer to andersenwindows.com/measure for detailed instructions on how to properly measure for custom-size windows.
45
CASEMENT & AWNING WINDOWS Grille Patterns Diamond*
Prairie A
Specified Equal Light with Check Rail Colonial
Modified** Colonial
(Simulated Check Rail)
Modified** Colonial SCR
Tall Fractional
(Simulated Check Rail)
Tall Fractional SCR
Short Fractional
(Simulated Check Rail)
Short Fractional SCR
Victorian
(Simulated Check Rail) 4 9 ⁄ 16" (116)
Jamb Depth
Casement 1 5 ⁄ 16" (33)
2 7 ⁄ 8" (73)
(6)
1 ⁄ 4"
Extension Jamb
2 3 ⁄ 8" (60)
Head
Low-E4® Insulating Glass Insect Screen
1 7 ⁄ 16" (37) 1 1 ⁄ 8" (29)
(6)
1 ⁄ 4"
*Available only in Simulated Divided Light (SDL) configuration and only in 3/4" (19) and 7/8" (22) widths. **Location from top of window to bottom of divided light pattern is available at 8" (203), 10 " (254), 12" (305), center and custom dimensions.
Clear Opening Height
Transom
Unit Dimension Height
Picture
1 1 ⁄ 8" (29) 1 3 ⁄ 16" (30)
2 5 ⁄ 8" (67)
Minimum Rough Opening Height
Awning
Number of lights and overall pattern varies with window
Sill
size. Patterns are not available in all configurations. Specified equal light and custom patterns are also available. For more information on divided light see page 11 or visit
Specified Equal Light Examples
Custom Pattern Examples
andersenwindows.com/grilles.
Interior Trim Options Extension jamb and drywall return bead applications shown. See page 33 for more information.
Extension Jamb
Thick Replacement Extension Jamb
Available for a variety of wall depths.
Useful when alignment with existing trim and paint lines is desired.
head
head
sill
sill
4 9 ⁄ 16" (116) Jamb Depth 1 5 ⁄ 16" (33)
2 7 ⁄ 8" (73)
1 1 ⁄ 8" (29) 15 ⁄ 16" (17) Unit Dimension Height
Minimum Rough Opening Height
(6)
1 ⁄ 4"
Extension Jamb
Andersen® Narrow Drywall Return Bead
Andersen® Wide Drywall Return Bead
Insect Screen Low-E4® Insulating Glass
Not recommended for picture or transom windows. head
sill
sill
Head Clear Opening
1 1 ⁄ 8" (29 1 1 ⁄ 8" (29
(6)
1 ⁄ 4"
head
8 3 ⁄ 8" Sash Projection (213) • Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Dimensions in parentheses are in millimeters. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com.
46
Sill
ill Stop to ubfloor imension
400 Series Casement & Awning Windows
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 4 9 ⁄ 16" (116) Jamb Depth
Minimum Rough Opening Width 1 ⁄ 4"
Unit Dimension Width
(6)
1 ⁄ 4"
2 7 ⁄ 8" (73)
1 5 ⁄ 16" (33)
(6)
Clear Opg. Width (6)
1 ⁄ 4"
Extension Jamb
Cle
Jamb
C o For t arm pli s ith
w
Sash Projection
Mullion
Jamb
2 3 ⁄ 8" (60)
1 7 ⁄ 16" (37) 1 1 ⁄ 8" (29)
Sill Stop to Subfloor Dimension
1 5 ⁄ 16" (33
Sill
Horizontal Section
14 1 ⁄ 4" (362) 17 3 ⁄ 4" (451) 21 3 ⁄ 8" (543) 25 5 ⁄ 8" (651) 28 3 ⁄ 4" (730) 33 3 ⁄ 16" (843)
4 9 ⁄ 16" (116) Jamb Depth
Clear Opening Height
Insect Screen
(6)
1 5 ⁄ 16" (33)
Low-E4® Insulating Glass
Head
1 ⁄ 4"
h idt g. W izes tor. p O W s era p ar
Unit Dimension Height
2" (51)
(24)
1 1 ⁄ 8" (29) 1 3 ⁄ 16" (30)
2 5 ⁄ 8" (67)
15 ⁄ 16"
2 7 ⁄ 8" (73)
4 9 ⁄ 16" (116) Jamb Depth
1 1 ⁄ 8" (29)
Minimum Rough Opening Height
For all sizes except CW sizes with split arm operator.
Vertical Section
Awning Window Details
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
4 9 ⁄ 16" (116) Jamb Depth 2 7 ⁄ 8" (73)
1 5 ⁄ 16" (33)
Extension Jamb
2 7 ⁄ 8" (73)
Insect Screen Low-E4® Insulating Glass
(6)
Unit Dimension Width Minimum Rough Opening Width Horizontal Section
1 1 ⁄ 8" (29) 1 1 ⁄ 8" (29)
Jamb 1 ⁄ 4"
(6)
(6)
1 ⁄ 4"
Clear Opg. Width
8 3 ⁄ 8" Sash Projection (213)
1 5 ⁄ 16" (33)
Head
1 ⁄ 4"
Jamb
Insect Screen Low-E4® Insulating Glass
Clear Opening
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
2 5 ⁄ 16" (59)
1 1 ⁄ 8" (29) 15 ⁄ 16" (17)
7
(6)
1 ⁄ 4"
Extension Jamb
Unit Dimension Height
1 3 ⁄ 16" (30)
Minimum Rough Opening Height
1 1 ⁄ 8" (29) 4 9 ⁄ 16" (116) Jamb Depth
l Stop Subfloor mension
Casement Window Details
Sill Stop to Subfloor Dimension
Sill Vertical Section
• 4 9/16" (116) Jamb depth measurement is from backside of installation flange. • Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Dimensions in parentheses are in millimeters. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com.
47
Picture and Transom Window Details Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
1 ⁄ 4"
(6)
1 ⁄ 4"
Head Low-E4® Low-E4® Glass Insulating Insulating Glass Extension Extension Jamb Jamb
Vertical Section
Horizontal (stack) Joining Detail
Separate Rough Openings Detail
Overall Window Dimension Height
To meet structural requirements or to achieve a wider joined
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
4 9 ⁄ 16" (116) Jamb Depth plus 1 ⁄ 8" (3) for each join. Sum of individual window heights 2 7 ⁄ 8" (73) 1 5 ⁄ 16" Overall (33) Rough Opening Height
1 ⁄ 8"
Low-E4® Insulating Glass 2 3 ⁄ 8" (60) 2 3 ⁄ 8" (60) Extension Jamb
(3)
(6)
Head
Andersen® exterior filler and exterior vinyl trim. Sill 2 3 ⁄ 8" (60) 3 2 ⁄ 8" (60) Jamb Jamb Jamb
Unit Dim. Height
Head
openings having vertical support (by others) in combination with
(13).
1⁄ Sill 1 8" (29) 1 3 ⁄ 16" (30)
Unit Dim.
Unit Dim. (3) Unit Dim.
2 3 ⁄ 8" Unobstr. (60) Glass
1 ⁄ 8"
Unit Dim.
Sill
1 ⁄ 2"
appearance, windows may be installed into separate rough
Jamb
2 5 ⁄ 8" (67)
1 ⁄ 8"
(3)
Unit Dim. Height
Overall window dimension height plus
2 3 ⁄ 8" (60)
(6)
(3)
Head
Horizontal Section
1 ⁄ 4"
(3)
Unit Dim. Unit Dim. Unit Dim. Unit Dim. 1 ⁄ 8" (3) Head 1 ⁄ 8" (3) Vertical Section Picture over Casement
Head
Vertical Sill Section Casement over Awning
Jamb Andersen® Filler and Andersen® Vinyl Trim Filler and Vinyl Trim
Unit Dim.
Jamb
Jamb
Jamb Vertical Support Vertical by Others Support by Others
Unit Dim. Unit Dim. Dim. 2"Unit (51) 2" (51) Horizontal Section Casement and Casement
Vertical (ribbon) Joining Detail
Scale 11 ⁄ 2" (38) =Sill1'-0" (305) — 1:8 Unit Dim.
Overall Window Dimension Width
2 3 ⁄ 8" (60) Jamb
Jamb
Sum of individual window widths plus 1 ⁄ 8" (3) for each join. 1 ⁄ 8" (3)
Andersen® Filler and Vinyl Trim
Jamb
Jamb
Vertical Support by Others
Unit Dim.
2 3 ⁄ 8" (60)
Overall Rough Opening Width Overall window dimension width plus 1 ⁄ 2" (13). Head
Unit Dim. Unit Dim. 1 ⁄ 8" (3)
Unit Dim.
2" (51)
Unit Dim.
Horizontal Section Casement to Casement
For more joining information see the combination designs section starting on page 255. • 4 9/16" (116) jamb depth measurement is from backside of installation flange. • Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Dimensions in parentheses are in millimeters. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings.
48
2 5⁄ (67
1 ⁄ 8"
1 ⁄ 8"
Sill
Sill
Unit Dimension Height
Unit Dim. Height
Head
Sill
Unit Dim. Height
2 3 ⁄ 8" (60) 2 3 ⁄ 8" Unobstr. (60) Glass
Unit Dimension Height
Min. Rough Opening Height 2 3 ⁄ 8" Unobstr. 2 3 ⁄ 8" (60)Dimension (60) Glass Height Unit
(6)
1 ⁄ 4"
(6)
Sill
1 3 ⁄ 16" (30) 1 3 ⁄ 16" (30)
Unit Dim. Height
Unit Dimension Width 1 Unit Dimension Width (6) ⁄ 4" (6) Minimum RoughWidth Opening Width Minimum Rough Opening
1 1 ⁄ 8" (29)1 1 ⁄ 8" (29)
Unit Dim. Height
1 ⁄ 4"
Jamb
4 9 ⁄ 16Jamb " (116) Jamb Depth 4 9 ⁄ 16" (116) Depth 2 7 ⁄ 8" (73)2 7 ⁄ 8" (73) (33)
(6)
(6)
Jamb 2 3 ⁄ 8" (60)
1 5 ⁄ 16" (33)
1 ⁄ 4"
1 ⁄ 4"
2 3 ⁄ 8" 2 3 ⁄ 8" Unobstructed Unobstructed (60) (60) Glass Width Glass Width
(6)
3 ⁄ 8" 2Jamb (60)
1 ⁄ 4"
1 5 ⁄ 16" (33) 1 5 ⁄ 16" (33) Jamb
1 5 ⁄ 16"
Min. Rough Opening Height
2 7 ⁄ 8" (73)
2479⁄ 8⁄ 16 " (73) " (116) Jamb Depth
4 9 ⁄ 16" (116) Jamb Depth
Low-E4® Low-E4® Glass Insulating Insulating Glass 1 3 ⁄ 16" (30) Extension Extension 1 1 ⁄ 8" (29)1 1 ⁄ 8" (29) 1 3 ⁄ 16" (30) Jamb Jamb
1 ⁄ 4"
Min. Rough Opening Height
CASEMENT & AWNING WINDOWS
Head
400 Series Replacement Casement & Awning Windows
REPLACEMENT CASEMENT & AWNING WINDOWS CUSTOM SIZING in 1â &#x201E;8" (3) increments
SECTION REFERENCE Sizes ............................................ 52 Specifications .............................. 52 Grille Patterns .............................. 46 Window Details ....................... 47-48 Performance Data ...................... 269 Warranty .............................290-291 Dimensions in parentheses are in millimeters.
REPLACEMENT CASEMENT & AWNING WINDOWS FEATURES Frame A A seamless one-piece, rigid vinyl
Included Installation Materials
I
frame cover is secured to the exterior of the frame to protect the wood frame from moisture and maintain an attractive appearance while minimizing maintenance.
H
D
E
B Pre-drilled, through-the-jamb installation holes allow for quick and easy installation.
C Wood frame members are treated with a water-repellent preservative for long-lasting* protection and performance.
D Interior stops are unfinished pine. Low-maintenance prefinished White interiors are also available.
Sash E Rigid vinyl encases the entire sash — a vinyl weld protects each sash corner for superior weathertightness. It maintains an attractive appearance and minimizes maintenance.
F Wood core members provide excellent structural stability and energy efficiency.
G Flexible bulb weatherstripping or vinyl closed-cell foam weatherstripping is factory installed on the perimeter of the sash.
Glass H A glazing bead and silicone provide superior weathertightness and durability.
I High-performance glass options include: • Low-E4® glass® • Low-E4® HeatLock™ glass • Low-E4® Sun glass • Low-E4® SmartSun™ glass • Low-E4® SmartSun™ HeatLock™ glass Tempered glass and other glass options are available. Contact your Andersen supplier.
F
C
G B
Flat, self-hanging shims, backer rod, installation screws and complete instructions are included with each replacement casement window. Measurement guide and worksheet at andersenwindows.com/measure.
EXTERIOR
Hardware
INTERIOR
Smooth Control Hardware System The smooth control hardware system employs a worm gear drive for easy operation. Units with a split-arm operator move the sash away from the frame to provide easier glass cleaning. CXW15, CXW155, CXW16 and CXW25 sizes are not available with splitarm hardware. Hardware option and finish must be specified. Operator handle and cover sold separately. Single-Actuation Casement Lock On casement windows, a single-actuation lock easily releases all locking points on casement sash while the reach-out action eliminates binding when closing. The lock handle is offered in finishes that coordinate with your specified hardware option. Awning Sash Locks
White
Canvas
Sandtone
Forest Green
Dark Bronze
Black
Terratone
Pine
White
Naturally occurring variations in grain, color and texture of wood make each window one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
HARDWARE FINISHES
Antique Brass
Black
Bright Brass
Gold Dust
Oil Rubbed Polished Bronze Chrome
Brushed Chrome
Distressed Distressed Bronze Nickel
Satin Nickel
Stone
Distressed bronze and oil rubbed bronze are "living" finishes that will change with time and use.
CASEMENT & AWNING HARDWARE OPTIONS
**
CLASSIC SERIES™
A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite.
White
ESTATE ™
Patterned Glass Patterned glass options are available. See page 10 for more details.
Awning sash locks provide an added measure of security and weathertightness. Hardware style and finish options are compatible with Andersen® casement windows to ensure consistency in appearance when used in combination designs.
* Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 400 Series Limited Warranty. ** Hardware sold separately. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
50
Stone | White
Antique Brass | Bright Brass Brushed Chrome | Distressed Bronze Distressed Nickel | Oil Rubbed Bronze Polished Chrome | Satin Nickel
TRADITIONAL FOLDING
CONTEMPORARY FOLDING
Antique Brass | Black | Bright Brass Distressed Bronze | Distressed Nickel Gold Dust | Oil Rubbed Bronze | Satin Nickel Stone | White
Black | Bright Brass Gold Dust | Oil Rubbed Bronze Satin Nickel | Stone | White
Folding handle avoids interference with window decorating treatments.
Bold name denotes finish shown.
ACCESSORIES Sold Separately Frame
Drywall Return Bead
Metal T-Handle
Extension Jambs
Glass
Our smallest operator handle, the metal T-handle may make it more difficult for young children (5 and under) to open the window. A drywall return bead is available in a narrow or wide dimension with unfinished pine or prefinished White interiors. Can be ordered factory-applied or in non-applied lineals. Detail on page 46.
Hardware Corrosion-Resistant Components
For more information on child safety, write:
Insect Screens
Andersen Corporation LookOut for Kids® Program 100 Fourth Avenue North Bayport, MN 55003
TruScene® Insect Screen
Call 1-800-313-8889 or email us at: lofk@andersencorp.com
Standard jamb depth is 2 ⁄ " (73). Extension jambs are available in unfinished pine or prefinished White. Some sizes may be veneered.
Operator Spline Cover
Factory-applied and non-applied interior extension jambs are available in 1⁄16" (1.5) increments between 4 9⁄16" (116) and 7 1⁄8" (181). Extension jambs can be factory applied to either three sides (stool and apron application) or four sides (picture frame casing).
Corrosion-resistant hinge and operator arm hardware is designed for applications in harsh and corrosive environments such as heavy industrial or coastal areas.*
Thick Replacement Extension Jambs
Window Opening Control Device Kit
An operator spline cover is an attractive cap that covers the roto operator stud when the handle has been removed to control access or operation of the window. The operator spline cover should not be used on any window designated or intended for emergency escape or rescue. Please consult your local building code official for local egress code requirements.
78
Andersen art glass panels come in a variety of original patterns, including four Frank Lloyd Wright ® Series designs. See pages 213-214 for details on Andersen art glass. Visit andersenwindows.com/artglass for details and pattern information.
Power Operator for Awning Windows
Exclusive Andersen® TruScene® insect screens provide over 50% more clarity than our conventional insect screens for a beautiful unobstructed view. They allow more fresh air and sunlight in, while doing a better job of keeping out small insects. For casement and awning windows, they are available with Stoneor White-colored frames or with pine veneer frame interiors to blend with the wood interior of the window. Conventional Insect Screen Conventional insect screens have charcoal powder-coated aluminum screen mesh. Available with frames in White or Stone.
To help preserve original alignment of trim and paint lines, special 1 1/8" (29) thick replacement extension jambs are available. Factory-applied and non-applied extension jambs are available in 1⁄16" (1.5) increments between 4 9⁄16" (116) and 7 1⁄8" (181). Non-applied extension jambs are available in 12' (3658) lineals. Detail on page 46.
A Window Opening Control Device Kit is available, which limits sash travel to less than 4" (102) when the window is first opened. Available in Stone and White.
Special Use Operator Handles Available in Classic Series™ design only. Compact Operator Handle Specially designed for use in situations where blinds or other window treatments interfere with standard operator handle. Available in White or Stone finish. Easy-Grip Handle
For more information about glass, patterned glass, art glass, grilles and TruScene® insect screen see pages 10-17. For more information about product performance, installation accessories and warranty see pages 269-291 or visit
andersenwindows.com
Larger knob makes it easier to grip and operate. Available in White or Stone finish.
Grilles Awning windows can now be ordered with an operator enhanced by PowerAssist™ technology that opens and closes the window with the touch of a button. Easy to install, the 24-volt system features a concealed window power drive, battery back-up in case of a power outage and a moisture sensor that automatically closes the window when it rains. A wireless remote is available (sold separately). The PowerAssist system is controlled by a wall-mounted console, which includes a power box, battery, touch pad and mounting bracket. Windows can be ordered factoryprepped to save time or ordered as a field kit. Power driver requires field installation. PowerAssist technology eliminates the need for sash locks and is available for windows up to five feet wide. Contact your Andersen supplier for availability.
Grilles are available in a variety of configurations and widths. For casement and awning grille patterns see page 46. CAUTION: • Painting and staining may cause damage to rigid vinyl. • 400 Series windows in Terratone color may be painted any color lighter than Terratone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Terratone any color darker than Terratone. • Do not paint 400 Series windows with White, Canvas, Sandtone, Forest Green, Dark Bronze or Black exterior colors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
* Visit andersenwindows.com/warranty or contact your Andersen supplier for details. Dimensions in parentheses are in millimeters. “Frank Lloyd Wright” is a registered trademark of the Frank Lloyd Wright Foundation.
51
400 Series Replacement Casement & Awning Windows
Andersen® Art Glass
REPLACEMENT CASEMENT & AWNING WINDOWS Replacement Sizes and Specification Formulas Casement Windows (stationary & venting) 17" to 35 15 ⁄ 16" (432) (913)
Available in 1 ⁄ 8" (3) increments between minimum and maximum widths and heights. Windows can also be custom sized to match standard sizes ending in a sixteenth of an inch. Some restrictions apply, contact your Andersen supplier. Custom sizing is available for single windows only. To achieve custom-size 2- or 3-wide combinations, join custom-size single windows. For minimum rough opening dimensions for joined windows,
CUSTOM HEIGHTS
24 1 ⁄ 8" to 71 7 ⁄ 8" (613) (1826)
CUSTOM WIDTHS
Clear Opg.
see specific joining instruction guides. Measurement guide for custom sized windows can be found at andersenwindows.com/measure. Thick replacement extension jambs are available to preserve original alignment of trim and paint lines. Shown on page 51, see page 46 for detail. Width
= window width − 5.81" (148) = (window width − 9.66" (245)) X 1.07 = window width − 9.70" (246)
Width
Width
= window width + 1/2" (13)
Height = window height + 1/2" (13)
= window height − 4.85" (123)
Height ≥ 40 13 /16" (1037) and < 48" (1219); Width ≥ 28 3 /8" (721) and < 31 1 /2" (800) All other window heights
= window width − 5.81" (148) = window width − 6.10" (155)
Width ≥ 24 1 /8" (613) with straight-arm operator Width ≥ 17" (432) with split-arm operator
Height = window height − 4.43" (113)
Vent Opg.
Min.R.O.
Width ≥ 24 1 /8" (613) with straight-arm operator Width ≥ 28 3 /8" (721) with split-arm operator & control bracket Width ≥ 17" (432) with split-arm operator
Unobst. Gls.
Width
= window width − 4.40" (112)
Height = window height − 4.95" (126)
Height ≥ 40 13 /16" (1037) and < 48" (1219); Width ≥ 28 3 /8" (721) and < 31 1 /2" (800) All other window heights
Height = window height − 4.43" (113)
= window height − 4.85" (123)
CUSTOM WIDTHS
CUSTOM WIDTHS
CUSTOM WIDTHS
Clear Opg.
Width
Unobst. Gls.
= window width − 4.53" (115)
Height ≥ 17" (432) and < 20 1 /2" (521)
Width
= window width − 4.81" (122)
Height = window height − 4.51" (115)
Height ≥ 20 1 /2" (521) and < 24 1 /8" (613) All other window heights
= 6.44" (164) = 6.50" (165)
Casement/Awning Picture and Transom Windows
17" to 84 5 ⁄ 8" (432) (2150)
Casement Transom (CTR) Picture Transom (PTR)
60" to 71 7 ⁄ 8" (1524) (1826)
36" to 71 7 ⁄ 8" (1826) (914)
CUSTOM WIDTHS
CUSTOM WIDTHS
CUSTOM WIDTHS
CUSTOM HEIGHTS
35 15 ⁄ 16" to 59 7 ⁄ 8" (913) (1521)
36" to 59 7 ⁄ 8" (914) (1521)
CUSTOM HEIGHTS
= window width + 1/2" (13)
Height ≥ 20 1 /2" (521) and < 24 1 /8" (613) All other window heights
Height = 6.38" (162)
36" to 71 7 ⁄ 8" (914) (1826)
Width
Height = window height + 1/2" (13)
Height ≥ 17" (432) and < 20 1 /2" (521)
= 6.44" (164) = 6.50" (165) Width
CUSTOM HEIGHTS
Min.R.O.
= window width − 4.53" (115)
Height = 6.38" (162)
Vent Opg.
CUSTOM HEIGHTS
48 1 ⁄ 8" to 71 7 ⁄ 8" (1222) (1826)
17" to 35 15 ⁄ 16" (432) (913)
24 1 ⁄ 8" to 48" (613) (1219)
17" to 48" (432) (1219)
24 1 ⁄ 8" to 71 7 ⁄ 8" (613) (1826)
CUSTOM HEIGHTS
17" to 35 15 ⁄ 16" (432) (913)
Awning Windows (stationary & venting)
12" (305) height only
Min.R.O.
Width
= window width − 1/2" (13)
Height = window height − 1/2" (13)
Unobst. Gls.
Width
= window width − 4.80" (122)
Height = window height − 4.80" (122)
• Dimensions in parentheses are in millimeters. • Clear Opg. (clear opening) formulas provide dimensions for determining area available for egress. Vent Opg. (vent opening) formulas provide dimensions for determining area available for passage of air. Min. R.O. (minimum rough opening) formulas provide minimum rough opening width and height dimensions. Unobstr. Gls. (unobstructed glass) formulas provide dimensions for determining area available for passage of light. • Refer to andersenwindows.com/measure for detailed instructions on how to properly measure for custom-size windows.
52
COMPLEMENTARY CASEMENT WINDOWS CUSTOM SIZING 400 Series Complementary Casement Windows
in 1â &#x201E;8" (3) increments
SECTION REFERENCE Styles & Sizes ............................. 56 Window Details ....................... 57-58 Performance Data ...................... 269 Warranty .............................290-291 Dimensions in parentheses are in millimeters.
COMPLEMENTARY CASEMENT WINDOWS EXTERIOR
FEATURES Frame A Heavy-duty extruded aluminum
H
cladding protects the frame exterior, providing low-maintenance durability. Standard cladding finish meets AAMA 2604. An optional finish that meets the AAMA 2605 standard is also available.
B Wood frame members are treated
C
with a water-repellent wood preservative for long-lasting* protection and performance.
B
G D
E
A
F
C Interior stops are unfinished. Lowmaintenance prefinished White interiors are also available. Installation flange extends 1 1⁄2" (38) around the perimeter of the unit for positioning and locating. Installation clips are standard for increased structural anchoring to building members. Mounted around the frame perimeter, the clips rotate into position and can be bent into place against the framing members to suit all jamb conditions.
Patterned Glass
White
Canvas
Sandtone
Terratone
Forest Green
Dove Gray
Prairie Grass
Red Rock
Cocoa Bean
Black
Oak
White
Dark Bronze
INTERIOR
Patterned glass options are available. See page 10 for more details.
Hardware Smooth Control Hardware System
Pine
Maple
Naturally occurring variations in grain, color and texture of wood make each window one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
HARDWARE FINISHES
Sash D Wood core members provide excellent structural stability and energy efficiency.
E Heavy-duty extruded aluminum cladding protects the sash exterior, providing lowmaintenance durability.
F Weatherstripping throughout the unit provides a long-lasting,* energy-efficient seal. Rain skirt is factory installed on the perimeter of the sash.
Glass G Silicone glazing bead combined with two-sided silicone tape provides superior weathertightness.
H High-performance glass
The smooth control hardware system employs a worm gear drive for easy operation. The split-arm operator moves the sash away from the frame to provide for easier glass cleaning on rectangular units. Arch and Springline™ units use the same smooth control hardware system with stainless steel butt hinges for smooth operation. Hardware option and finish must be specified. Operator handle and cover sold separately.
Antique Brass
Black
Bright Brass
Gold Dust
Oil Rubbed Polished Bronze Chrome
Brushed Chrome
Distressed Distressed Bronze Nickel
Satin Nickel
Stone
White
Distressed bronze and oil rubbed bronze are "living" finishes that will change with time and use.
CASEMENT & AWNING HARDWARE OPTIONS
**
CLASSIC SERIES™
ESTATE™
Single-Actuation Casement Lock
options include: • Low-E4® glass® • Low-E4® HeatLock™ glass • Low-E4® Sun glass • Low-E4® SmartSun™ glass • Low-E4® SmartSun™ HeatLock™ glass Tempered glass and other glass options are available. Contact your Andersen supplier. A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite.
Stone | White
A single-actuation lock easily releases all locking points on casement sash while the reach-out action eliminates binding when closing. The lock handle is offered in finishes that coordinate with your specified hardware option.
Antique Brass | Bright Brass Brushed Chrome | Distressed Bronze Distressed Nickel | Oil Rubbed Bronze Polished Chrome | Satin Nickel
TRADITIONAL FOLDING
CONTEMPORARY FOLDING
Antique Brass | Black | Bright Brass Distressed Bronze | Distressed Nickel Gold Dust | Oil Rubbed Bronze | Satin Nickel Stone | White
Black | Bright Brass Gold Dust | Oil Rubbed Bronze Satin Nickel | Stone | White
Folding handle avoids interference with window decorating treatments.
Bold name denotes finish shown. * Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 400 Series Limited Warranty. ** Hardware sold separately. Dimensions in parentheses are in millimeters. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
54
ACCESSORIES Sold Separately French Casement
Frame
Special Use Operator Handles
Insect Screens
Extension Jambs
Available in Classic Series™ design only.
TruScene® Insect Screen
Compact Operator Handle
Andersen complementary French casements allow both sash to swing outward from the center, eliminating a center mullion post. They offer smooth operating multi-point locking mechanisms and hinges. The multi-point lock is activated with a single turn of a handle and simultaneously secures both sash. French casement windows have a unique locking handle that is available in all finishes, except distressed bronze, distressed nickel and gold dust.
Easy-Grip Handle
Complementary casement jamb depth is 3 3⁄8" (86). Extension jambs are available in 1⁄16" (1.5) increments between 4 9⁄16" (116) and 7 1⁄8" (181). Additional dimensions are available. Contact your Andersen supplier for more information. Extension jambs are available in unfinished pine or prefinished White. Available for jobsite application or can be factory-applied.
Hardware Corrosion-Resistant Components
Larger knob makes it easier to grip and operate. Available in White or Stone finish.
Exclusive Andersen® TruScene® insect screens provide over 50% more clarity than our conventional insect screens for a beautiful unobstructed view. They allow more fresh air and sunlight in, while doing a better job of keeping out small insects. For complementary casement windows, TruScene frames are available in White, Stone or Gold Dust as well as three wood veneers.
Metal T-Handle
Conventional Insect Screen
Our smallest operator handle, the metal T-handle, may make it more difficult for young children (5 and under) to open the window. For more information on child safety, write:
Corrosion-resistant hinge and operator arm hardware is designed for applications in harsh and corrosive environments such as heavy industrial or coastal areas.*
Andersen Corporation LookOut for Kids® Program 100 Fourth Avenue North Bayport, MN 55003
400 Series Complementary Casement Windows
Specially designed for use in situations where blinds or other window treatments interfere with standard operator handle. Available in White or Stone finish.
®
Conventional insect screens have black fiberglass screen mesh. Optional charcoal powder-coated aluminum screen mesh is available. Frames are available in White and Stone. CAUTION: • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products.
Call 1-800-313-8889 or email us at: lofk@andersencorp.com Operator Spline Cover
Window Opening Control Device Kit
A Window Opening Control Device Kit (shown on standard casement window) is available, which limits sash travel to less than 4" (102) when the window is first opened. Available in Stone and White.
An operator spline cover is an attractive cap that covers the roto operator stud when the handle has been removed to control access or operation of the window. The operator spline cover should not be used on any window designated or intended for emergency escape or rescue. Please consult your local building code official for local egress code requirements.
* Visit andersenwindows.com/warranty or contact your Andersen supplier for details. Dimensions in parentheses are in millimeters.
55
CUSTOM HEI
3'-4 13 ⁄ 16" to (1037) (
CUSTOM HEIGHTS CUSTOM HEI
Styles and Sizes
7'-0" 13 1'-8 1 ⁄ 2" to 3'-4 ⁄ 16" to (521) (2134) (1037) (
CUSTOM HEI
1'-8 1 ⁄ 2" to (521) (
CUSTOM HEI
1'-8 1 ⁄ 2" to (521) (
COMPLEMENTARY CASEMENT WINDOWS
CUSTOM WIDTHS
Choose left, right or stationary as viewed from the exterior. Custom-size complementary casement windows are available in 1 ⁄ 8" (3) increments between minimum and maximum widths and heights. Standard sizes are
CUSTOM HEIGHTS
7' 0" 2' 11 15 ⁄ 16" to (913) (2134)
CUSTOM HEIGHTS
CUSTOM HEIGHTS
Insect Screen
7'-0" 2'-11 15 ⁄ 16" to (913) (2134)
4 9 ⁄ 16" (116) Jamb Depth
CUSTOM HEIGHTS CUSTOM HEIGHTS
1'-8 1 ⁄ 2" 2'-11 15 ⁄ 16" to (521) (913) 7 ⁄ 8" CUSTOM WIDTHS (22) Extension J
8'-11 13 ⁄ 16" (2738)
1 5 ⁄ 16" (33)
4'-8 1 ⁄ 2" (1435)
4'-0" to (1219)
4'-0" to (1219)
4'-3" to (1295)
CUSTOM WIDTHS CUSTOM HEIGHTS
3 1 ⁄ 8" 7 7 (79)4'-11 ⁄ 8" to 5'-11 ⁄ 8" (1521) (1826)
7 ⁄ 8" 3'-5" 5'-11 " (116) Jamb Depth 4 9 ⁄ 16 to (1041) (1826) 3 ⁄ 5 3 8" (86) 1 ⁄ 16" CUSTOM(33) WIDTHS Curved Casing
8'-11 13 ⁄ 16" (2738)
CUSTOM WIDTHS
1 1 ⁄ 8" (29) 7 ⁄ 8"
(22)
Extension Jamb Head
Insect Screen
4'-8 1 ⁄ 2" (1435)
3 1 ⁄ 8" (79)
Arch French Casement
1 7 ⁄ 16" (3
1 1 ⁄ 8" (2 4'-8 1 ⁄ 2" 4'-0" to (1219) (1435)
4'-8 1 ⁄ 2" 4'-0" to (1219) (1435)
CUSTOM WIDTHS
CUSTOM WIDTHS
2'-11 15 ⁄ 16" 4'-0" 5'-11 7 ⁄ 8"5'-11 7 ⁄ 8" to to (913) (1826) (1219) (1826)
4'-8 1 ⁄ 2" (1435)
CUSTOM WIDTHS 3'-4 3 ⁄ 4" (1035)
4'-8 1 ⁄ 2" to (1435)
CUSTOM HEIGHTS
4'-0" to (1219)
5'-11 7 ⁄ 8" 4'-0" to (1219) (1826)
CUSTOM WIDTHS 4'-8 1 ⁄ 2" 4'-0" to (1219) (1435)
Sill
1 1 ⁄ 8" (29)
1 16" (33) Jamb CUSTOM WIDTHS
7 ⁄ 8" (22)
Extension J
to
1'-5" 2'-11 15 ⁄ 16 "
to
4'-
(6)
15 ⁄ 16"
Unobstructed 3 1 ⁄ 8" 3 1 ⁄ 8" CUSTOM WID WIDTHS Glass Width (79) CUSTOM (79) Unit Dimension Width S
1 ⁄ 4"
"
TS
0"
4'-8 1 ⁄ 2" 4'-0" to (1219) (1435)
CUSTOM WIDTHS
CUSTOM WIDTHS
• Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. 1'-5" 2'-11 15 ⁄ 16" 1'-5" *For exterior wall cladding that extends beyond the face of the window, there may be a reduction in the amount of opening "swing" when the curved portion of the sash touches the5curved ⁄ to portion of the wall cladding.
56
4'-8 1 ⁄ 2" (1435)
3 3 ⁄ 8" (86)
8'-11 13 ⁄ 16" (2738)
8'-11 13 ⁄ 16 (2738)
4'-3" to (1295)
CUSTOM WIDTHS CUSTOM WIDTHS Unobstructed 3 1 ⁄ 8" 3 1 ⁄ 8" Jamb Glass Width (79) 5'-11 7 ⁄ 8"(79) 2'-10" to Unit Dimension Width (864) 1 (1826) ⁄ 4" (6) Minimum Rough Opening Width CUSTOM WIDTHS
Unobstructed Glass Height
CUSTOM WIDTHS
For casement picture and transom window sizes contact your Andersen supplier.
CUSTOM WIDTHS 4'-3" to (1295)
Unit Dimension Height
CUSTOM WIDTHS
to
2'-0 1 ⁄ 8" 2'-11 15 ⁄ 16" to (613) (913) * Casement
Minimum Rough Opening Height
1'-8 1 ⁄ 2" 2'-11 15 ⁄ 16" to (521) (913)
3'-4 3 ⁄ 4" (1035)
1'-8 1 ⁄ 2" 2'-11 15 ⁄ 16" to (521) (913) 1 1 ⁄ 8" CUSTOM WIDTHS (29)
* Twin Springline™ Casement CUSTOM WIDTHS
1'-8 1 ⁄ 2" 2'-11 15 ⁄ 16" to (521) (913)
4'-3" to (1295)
CUSTOM WIDTHS
4 9 ⁄ 16" (116) Jamb Depth
* Flanker Casement CUSTOM WIDTHS
2'-11 15 ⁄ 16" 1'-5" to (432) (913)
Minimum Rough Opening Width TS
5'-11 7 ⁄ 8" (1826)
CUSTOM HEIGHTS
CUSTOM WIDTHS
(913)
CUSTOM WIDTHS
3 3 ⁄ 8" (86) 4'-0" 7'-0" to (1219) (2134)
CUSTOM HEIGHTS
7' 0" 2' 11 15 ⁄ 16" to (913) (2134)
3'-5" to (1041)
2'-11 15 ⁄ 16"
CUSTOM WIDTHS
CUSTOM HEIGHTS
4'-8 1 ⁄ 2" (1435)
7'-0" 15 ⁄ 2'-11 15 ⁄ 16" to 2' 11 16" to 7' 0" (913) (2134) (913) (2134)
1'-5" to (432)
CUSTOM WIDTHS
7'-0" 2'-11 15 ⁄ 16" to (913) (2134)
to
CUSTOM HEIGHTS CUSTOM HEIGHTS CUSTOM HEIGHTS CUSTOM HEIGHTS
CUSTOM WIDTHS 2'-11 15 ⁄ 16" 1'-5" to (913) (432)
4'-11 7 ⁄ 8" 5'-11 7 ⁄ 8" to (1521) (1826)
CUSTOM WIDTHS
CUSTOM HEIGHTS
5'-11 7 ⁄ 8" (1826)
3'-4 3 ⁄ 4" (1035)
13 ⁄ 16" 7'-0" 4'-0" 7'-0" 7'-0" 4'-0" 2'-11 15 ⁄ 16" 3'-47'-0" 4'-11 7 ⁄ 8" 5'-11 7 ⁄ 8" 2'-11 15 ⁄ 16" 7'-0" to to to to to to (1219) (2134) (913) (2134) (1521) (1826) (1219) (2134) (1037) (2134) (913) (2134)
5'-11 7 ⁄ 8" 2'-10" to (864) (1826)
Rectangle French Casement
4'-8 1 ⁄ 2" (1435)
CUSTOM WIDTHS 3'-5" to (1041)
Triple Arch
CUSTOM WIDTHS CUSTOM HEIGHTS
4'-0" to (1219)
CUSTOM HEIGHTS
3'-4 13 ⁄ 16" to 7'-0" (1037) (2134)
CUSTOM HEIGHTS CUSTOM HEIGHTS CUSTOM HEIGHTS
CUSTOM WIDTHS
CUSTOM WIDTHS
2'-11 15 ⁄ 16" 5'-11 7 ⁄ 8" to (913) (1826)
CUSTOM WIDTHS
CUSTOM HEIGHTS CUSTOM HEIGHTS
5'-11 7 ⁄ 8" (1826)
CUSTOM WIDTHS
CUSTOM HEIGHTS
CUSTOM WIDTHS 5'-11 7 ⁄ 8" 2'-10" to (864) (1826)
Springline™ French Casement
3'-5" to (1041)
2'-0 1 ⁄ 8" 2'-11 15 ⁄ 16" to (613) (913)
4'-0" 7'-0" to (1219) (2134)
CUSTOM HEIGHTS
8'-11 13 ⁄ 16" (2738)
CUSTOM HEIGHTS CUSTOM HEIGHTS
™ CUSTOM Springline WIDTHS
CUSTOM HEIGHTS CUSTOM HEIGHTS
CUSTOM WIDTHS
4'-3" to (1295)
5'-11 7 ⁄ 8" (1826)
4'-11 7 ⁄ 8" 5'-11 2'-11 715⁄ 8⁄ "16" 5'-11 7 ⁄ 8"2'-11 15 ⁄ 16" to 7'-0" to to (2134) (913) (1826) (913) (1521) (1826)
5'-11 7 ⁄ 8" 2'-10" to (864) (1826)
CUSTOM WIDTHS
CUSTOM HEIGHTS CUSTOM HEIGHTS
3'-5" to (1041)
CUSTOM WIDTHS
2'-0 1 ⁄ 8" 2'-11 15 ⁄ 16" to (613) (913)
7'-0" 15 ⁄ 16" to 7'-0" 3'-4 13 ⁄ 16" to 2'-11 (1037) (2134) (913) (2134)
CUSTOM WIDTHS
1'-8 1 ⁄ 2" 2'-11 15 ⁄ 16" to (521) (913)
7'-0" 4'-0" to (1219) (2134)
USTOM WIDTHS
CUSTOM HEIGHTS CUSTOM HEIGHTS CUSTOM HEIGHTS CUSTOM HEIGHTS
15 ⁄ 16" 7'-0" 13 ⁄ 4'-0" 7'-0" 7'-0" 4'-11 7'-0"7 ⁄ 8" 5'-11 7 ⁄ 8" 2'-11 15 ⁄ 16" 2'-11 4'-0" 7'-0" to 3'-4 16" to to to to to (913) (2134) (1521) (1826) (1219) (2134) (1219) (2134) (1037) (2134) (913) (2134)
3)
2'-11 15 ⁄ 16" to (913)
2'-0 1 ⁄ 8" 2'-11 15 ⁄ 16" to (613) (913)
Casement*
5'-11 7 ⁄ 8" 2'-10" to (864) (1826)
7' 15 0"⁄ 16" 2' 11 15 ⁄ 16" 2'-11 7'-0" to to (913) (2134) (913) (2134)
CUSTOM WIDTHS
Twin Arch
2'-11 15 ⁄ 16" 1'-5" to (913) (432)
* Arch Casement CUSTOM WIDTHS
CUSTOM WIDTHS
Springline™ Casement*
1 ⁄ 8"
2'-11 15 ⁄ 16" 1'-5" to (913) (432)
(913)
CUSTOM WIDTHS
4'-0" 7'-0" 7'-0" 4'-0" to to (1219) (2134) (1219) (2134)
7'-0" 2'-11 15 ⁄ 16" to (913) (2134)
CUSTOM HEIGHTS CUSTOM HEIGHTS
15 ⁄ 16" 7'-0" 2'-11 15 ⁄ 16" 2' 11 7' 0" to to (913) (2134) (913) (2134)
(913)
USTOM WIDTHS
CUSTOM WIDTHS 2'-11 15 ⁄ 16" 1'-5" to (432) (913)
7'-0" 3'-4 13 ⁄ 16" to (1037) (2134)
CUSTOM HEIGHTS
2'-11 15 ⁄ 16" 1'-5" to (913) (432)
5" to 2)
to
2'-0 1 ⁄ 8" 2'-11 15 ⁄ 16" to (613) (913)
CUSTOM HEIGHTS
Unequal Leg Arch Casement
2'-11 15 ⁄ 16"
(432)
2'-0 1 ⁄ 8" 2'-11 15 ⁄ 16" to (613) (913)
CUSTOM HEIGHTS
7'-0" 2'-11 15 ⁄ 16" to (913) (2134)
CUSTOM WIDTHS
7'-0" 3'-4 13 ⁄ 16" to (1037) (2134)
STOM WIDTHS
CUSTOM HEIGHTS CUSTOM HEIGHTS
13 ⁄ 16" 7'-0" 1'-8 1 ⁄ 2" 3'-4 7'-0" to to (521) (2134) (1037) (2134)
2'-11 15 ⁄ 16" " to 2) (913)
(913)
Trapezoid Casement CUSTOM WIDTHS CUSTOM*WIDTHS
Rectangle Casement
CUSTOM WIDTHS 2'-11 15 ⁄ 16" 1'-5" to (432) (913)
to
CUSTOM HEIGHTS CUSTOM HEIGHTS
(432)
CUSTOM HEIGHTS CUSTOM HEIGHTS
2'-0 1 ⁄ 8" 2'-11 15 ⁄ 16" to (613) (913)
15 ⁄ 16"
15 ⁄ 16" your Andersen available to complement Andersen® 400 Series supplier for 2'-11Contact 2'-11 15 ⁄ 16 " details. 1'-5"products. 1'-5"
Clad Complementary Casement Window Details Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
7 ⁄ 8"
(22)
Curved Casing
1 1 ⁄ 8" (29)
(22) Extension Jamb Unobstructed 3 1 ⁄ 8" 3 1 ⁄ 8" Jamb Glass Width (79) (79) Sill Unit Dimension Width 1 ⁄ 4" (6) Minimum Rough Opening Width
Sill Stop to Subfloor Dimension Jamb 1 ⁄ 4"
1 1 ⁄ 8" (29) 7 ⁄ 8" (22)
(79)
3 1 ⁄ 8"
3 3 ⁄ 8" (86)
3 1 ⁄ 8" (79)
1 5 ⁄ 16"
(6)
1 ⁄ 4"
3 1 ⁄ 8" (79) Unobstructed Glass Height
3 73⁄ 8" ⁄ 8" (86) Unobstructed 3 1 ⁄ 8" Jamb (22) Extension Glass Width (79) Curved CasingJamb Unit Dimension Width Insect Screen 1 ⁄ 4" (6) Minimum Rough Opening Width 1 1 ⁄ 8" (29)
1 31 ⁄ 181"⁄ 85"⁄ 16" (33) (29) (79)
Jamb (6)
7 ⁄ 8" (22) 4 9 ⁄ 16" (116) Jamb Depth Extension Jamb 3 3 ⁄ 8" (86) 1 5 ⁄ 16" Head (33) 3 1 ⁄ 8" UnobstructedInsect Screen 3 1 ⁄ 8" Jamb Jamb Glass Width Curved Casing (79) (79) Unit Dimension Width 1 ⁄ 4" (6) 1 ⁄ 4" (6) 1 ⁄ 8" (29)1 7 ⁄ 16" (37) Minimum Rough Opening1Width 7 ⁄ 8" (22) 1 1 ⁄ 8" (29) Sill Stop to Subfloor Dimension 4 9 ⁄ 16" (116) Jamb Depth Head - Curved Top 3 3 ⁄ 8" (86) 1 5 ⁄ 16" Sill (33) Extension Jamb Vertical Section Curved Casing
1 1 ⁄ 8" (29)
7 ⁄ 8" (22) 1 1 ⁄ 8" (29) 7 ⁄ 8"
(22) Head - Curved Top Head - Lineal
Extension Jamb
Extension Jamb
1 1 ⁄ 8" 1'-5"
(29)
1 1 ⁄ 8" (29) 4'-11 15 ⁄ 16" to
3 1 ⁄ 8" (79)
Jamb
1 ⁄ 4"
Unobstructed Glass Height
(79)
2'-11 15 ⁄ 16"
t
to
3 1 ⁄ 8"
1'-5"
ing Height
CUSTOM WIDTHS
eight
(6)
Minimum Rough Opening Width
t Dimension Height
to
1 5 ⁄ 16" (33)
1 1 ⁄ 8" (29) 1 1 ⁄ 8" (29)
• 4 9/16" (116) is from backside (33)jamb depth measurement Headof- installation Curved Topflange. 1 1 1 ⁄ 8" (29) 8" window.Unobstructed 3 ⁄ 8" Andersen 3 1 ⁄ with • Light-colored areas are parts included Dark-colored areas are additional Jamb Jamb® parts required to complete window assembly as shown. 1 1 ⁄ 8" (29) 1 ⁄ 8" (29) 1288-289. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages Glass Width (79) (79) • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to unit installation guides at andersenwindows.com. 1 1 ⁄ 8" (29) 1 5 ⁄ 16" Unit Dimension Width 15 ⁄ 1 Extension 1Jamb 1'-5" 4'-11 16⁄ 4"" (6) are in millimeters. • Dimensions in parentheses ⁄ 4" (6) (33)
Jamb
400 Series Complementary Casement Windows
Unobstructed Glass Height 1 ⁄ 8" 3(86) (79)
Sill 4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33)
1 7 ⁄ 16" (37)
Sill Stop to Subfloor Dimension
1 1 ⁄ 8" (29)
4 9 ⁄ 16" (116) Jamb Depth
Insect Screen Insect Screen
9 ⁄ 16" (116) Section 4 Horizontal Jamb Depth 4'-8 1 ⁄ 2" 4'-0" to 13⁄ 81"⁄ 8" (1435)7Unobstructed (1219) 3 1 ⁄ 8" ⁄ 1 8 " 3 ⁄ 8" (86) Jamb Jamb 3 5 ⁄ 1 16" (29) (22) Extension Jamb Glass Width (79) (79) CUSTOM WIDTHS (33) Unit Dimension Width 1 ⁄ 4" (6) 1 ⁄ 4" (6) Curved Casing Minimum Rough Opening Width
CUSTOM HEIGHTS 4 9 ⁄ 16" (116) Jamb Depth
5'-11 7 ⁄ 8" 4'-0" to (1219) (1826)
1 5 ⁄ 16" (33)
Extension Jamb Extension Jamb
7 ⁄ 8"
1 7 ⁄ 16" (37)
Extension Jamb
3 1 ⁄ 8" (79)
3 3 ⁄ 8" (86)
4 9 ⁄ 16" (116) Jamb Depth
1 1 ⁄ 8" ⁄ 16" 1 5(29) (33)
7 ⁄ 8" 1 1 ⁄ 8" (22) (29) Sill Head
Sill Stop to Subfloor Dimension 1 5 ⁄ 16" (33)
(6)
3 1 ⁄ 8" (79)
3 13 ⁄ 8" Unobstructed (86) Glass Height (79)
3 1 ⁄ 8" (79)
3 1 ⁄ 8" (79) 4 9 ⁄ 16Unit " (116) Dimension Height Jamb Depth
CUSTOM HEIGHTS Minimum Rough Opening Height
4'-11 7 ⁄ 8" 5'-11 7 ⁄ 8" to (1521) (1826)
Scale
1 ⁄ 4"
Unobstructed Glass Height
Extension Jamb
3 ⁄ 8" (86) Head3(305) (38) = 1'-0" —Insect 1:8 Screen 1 1 ⁄ 8" (29) (33) Curved Casing 4'-8 1 ⁄ 2" 4'-0" to 1 7 ⁄ 16" (37) (1219) (1435) 1 ⁄ 81" (29) 1Sill 1 ⁄ 8" (29) Sill Stop to CUSTOM WIDTHS Subfloor 7 ⁄ 8" (22) Dimension
1 5 ⁄ 16"
7 ⁄ 8" (22)
Insect Screen
(116) Jamb Depth 4 9 ⁄ 16" Springline ™ Casement Window Details 1 7 ⁄ 16" (37) Clad Complementary
11 ⁄ 2"
(6)
Jamb
3 13⁄ 81"⁄ 8" (79) (79)
(22)
1 ⁄ 4"
1 7 ⁄ 16" (37) 1 11⁄ 81"⁄ 8(29) " (29) Sill Stop to Subfloor 1 1 ⁄ 8" (29) Dimension
3 1 ⁄ 8" (79)
1 1 ⁄ 8" (29)
Insect Screen
7 ⁄ 8" Extension Jamb (22) Extension Jamb - Curved Top HeadHead - Lineal Insect Screen Insect Screen
Unobstructed 3 1 ⁄ 8" 3 1 ⁄ 8" Extension Jamb Glass Width (79) (79) SillHead - Lineal Unit DimensionInsect Width Screen Vertical Section Minimum Rough Opening Width
Jamb
3 1 ⁄ 8" (79)
- Lineal ⁄ 8" (29) 1 1 Head
3 1 ⁄ 8" (79)
3 1 ⁄ 8" (79)
1 5 ⁄ 16" (33)
(6)
Extension Jamb
CUSTOM WIDTHS
Unobstructed Glass Height
1 ⁄ 4"
1 ⁄ 8" Unobstructed 3 (86) (79) Glass Height
3 1 ⁄ 8" (79)
Minimum Rough Opening Height
Rectangular or Curved Top
7 ⁄ 8"
Jamb
1 1 ⁄ 8" (29) 1 1 ⁄ 8" (29)
8'-11 13 ⁄ 16" Curved Casing Horizontal Section (2738)
Unobstructed Glass Height
3 3 ⁄ 8" (86) 4'-3" to (1295) Unit Dimension Height
CUSTOM HEIGHTS CUSTOM HEIGHTS Unit Dimension Height
4'-0" 7'-0" to (1219) (2134) 7'-0" 2'-11 15 ⁄ 16" to Minimum Rough Height (913) Opening (2134)
Head - Curved Top 1 Unobstructed 3 ⁄ 8" Glass Width (79) Unit Dimension Width 1 ⁄ 4" (6) Depth Rough Opening Width 4 9 ⁄ 16" (116) Jamb Minimum
1
1 1 ⁄ 8" (29)
Unit Dimension Height
(29) (22)
to (521) (913) 1 5 ⁄ 16" (33)CUSTOM WIDTHS 1 ⁄ 3 8" Jamb (79)
1 5 ⁄ 16" (33)
Rough Opening Height 9 ⁄ 16" (116) 4Minimum Jamb Depth Unit Dimension Height Minimum Rough Opening Height 3 3 ⁄ 8"
7 ⁄ 8"
(86) Unit Dimension Height
2'-11 15 ⁄ 16"
Minimum Rough Opening Height 4 9 ⁄ 16" (116) Jamb Depth Unit Dimension Height m Rough Opening Height 3 3 ⁄ 8"
1'-8 1 ⁄ 2"
1 1 ⁄ 8"
1 ⁄ 8" (29) 1 1 ⁄ 8" (29) 1 1 ⁄ 8" (29) 7 ⁄ 8" (22)
3 3 ⁄ 8" (86)
(6)
Jamb (22) Extension Jamb Glass Width (79) (33) Unit Dimension Width Insect Screen 1 ⁄ 4" (6)Casing Curved Minimum Rough Opening Width
4 9 ⁄ 16" (116) Jamb Depth Minimum Rough Opening Height 3 3 ⁄ 8"
1 ⁄ 4"
(29) (79)
3 1 ⁄ 8" (86)
4 9 ⁄ 16" (116) Jamb Depth
Jamb
7 ⁄ 8" 3 3 ⁄ 8" 5 ⁄ 16" 1Unobstructed
3 1 ⁄ 8" (79)
4 9 ⁄ 16" (116) Jamb Depth 1 31 ⁄ 81"⁄ 8"
3 1 ⁄ 8" (79)
3 3 ⁄ 8" (86)
CUSTOM HEIGHTS 4 9 ⁄ 16" (116) Jamb Depth
4 9 ⁄ 16" (116) Jamb Depth Head - Curved Top 3 3 ⁄ 8" (86) 1 5 ⁄ 16" (33)
CUSTOM WIDTHS
3 3 ⁄ 8" (86)
7' 0" 2' 11 15 ⁄ 16" to (913) (2134)
4 9 ⁄ 16" (116) Jamb Depth
2'-11 15 ⁄ 16" 1'-5" to (913) (432)
1 5 ⁄ 16" (33)
(6)
1 1 ⁄ 8" (29) 7 ⁄ 8" (22)
3 1 ⁄ 8" (79)
Extension Jamb Insect Screen
16"
S
3 3 ⁄ 8" (86) Curved Casing
1 1 ⁄ 8" (29)
ill Stop to ubfloor imension
1 ⁄ 4"
4 9 ⁄ 16" (116) Jamb Depth 1 5 ⁄ 16" (33)
Jamb
1 ⁄ 4"
CUSTOM HEIGHTS
3'-4 13 ⁄ 16" to 7'-0" (1037) (2134)
CUSTOM WIDTHS
(6)
Unobstructed 3 1 ⁄ 8" Glass Width (79) Sill HeadUnit - Lineal Dimension Width
3 1 ⁄ 8" (79)
Minimum Rough Opening Width
Jamb 1 ⁄ 4"
(6)
57
33 (8
Head 3 3 ⁄ 8" (86)Insect Screen
4 9 ⁄1 Jam
COMPLEMENTARY CASEMENT WINDOWS 1 5 ⁄ 16" (33)
1 7 ⁄ 16" (37)
Sill Stop to Subfloor Dimension
1 ⁄ 4"
(6)
Extension Jamb
Insect Screen
1 5 ⁄ 16" (33)
1 7 ⁄ 16" (37) Sill Stop to Subfloor Dimension
1 1 ⁄ 8" (29)
7 ⁄ 8" (22)
3 3 ⁄ 8" (86)
Head
Extension Jamb
4 9 ⁄ 16" (116) Jamb Depth
3 3 ⁄ 8" (86) 1 5 ⁄ 16" (33) Unobstructed 3 1 ⁄ 8" 3 1 ⁄ 8" Jamb Glass Width Curved Casing (79) (79) Unit Dimension Width 1 ⁄ 4" (6) 1 1 ⁄ 8" (29) Minimum Rough Opening7 Width ⁄ 8" (22) 3 1 ⁄ 8" (79)
1 1 ⁄ 8" (29)
Sill
1 5 ⁄ 16" (33)
Jamb 1 ⁄ 4"
(6)
3 1 ⁄ 8" (79)
Unobstructed Glass Width Unit Dimension Width
3 1 ⁄ 8" (79)
Minimum Rough Opening Width Horizontal Section
Jamb 1 ⁄ 4"
(6)
3 1 ⁄ 8" (79) Unobstructed Glass Height
- Curved Top HeadHead - Lineal Extension Jamb 1 1 ⁄ 8" (29) 1 1 ⁄ 8" (29) 1 1 ⁄ 8" (29) 1 1 ⁄ 8" (29)
Sill Head - Lineal Vertical Section 1 1 ⁄ 8" (29) 1 1 ⁄ 8" (29)
Sill
• 4 9/16" (116) jamb depth measurement is from backside of installation flange. • Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
58
1 ⁄ 4"
1 1 ⁄ 8" (29)1 1 ⁄ 8" (29) 1 1 ⁄ 8" (29) 7 ⁄ 8" (22)
3 1 ⁄ 8" (79)
(6)
Unit Dimension Height
1 ⁄ 4"
Minimum Rough Opening Width
Minimum Rough Opening Height
(6)
3 1 ⁄ 8" Jamb (79) Extension Jamb
3 3 ⁄ 8" (86)
4 9 ⁄ 16" (116) Jamb Depth
1 ⁄ 4"
Unobstructed 7 ⁄ 8" Glass Width (22) Unit Dimension Width
Unit Dimension Height
1⁄ 1 31 ⁄ 8"8" (79) (29)
Jamb
Minimum Rough Opening Height
1 5 ⁄ 16" (33)
Jamb
4 9 ⁄ 16" (116) Jamb Depth Head - Curved Top 3 3 ⁄ 8" (86) 1 5 ⁄ 16" (33) Extension Jamb Curved Casing
3 3 ⁄ 8" (86)
4 9 ⁄ 16" (116) Jamb Depth
Sill
3 1 ⁄ 8" (79)
Unobstructed Glass Height
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
4 9 ⁄ 16" (116) Jamb Depth
Unit Dimension Height
Clad Complementary Casement Stationary, Picture and Transom Window Details
Unobstructed 3 1 ⁄ 8" Jamb 7 ⁄ 8" Glass Width (79) (22) Extension Jamb Unit Dimension Width 1 ⁄ 4" (6) Insect Screen Minimum Rough Opening Width
3 1 ⁄ 8" (79)
(22)
1⁄ 131 ⁄ 8"8" (79) (29)
Jamb
3 1 ⁄ 8" (79)
7 ⁄ 8"
Sill
Unobstructed Glass Height
" (29) 1 11⁄ 81"⁄ 8(29)
3 1 ⁄ 8" (79)
Minimum Rough Opening Height
3 1 ⁄ 8" (79)
Curved Casing
3 1 ⁄ 8" (79)
Unobstru Glass H
Unit Dimensio
Minimum Rough
1 5 ⁄ 16" (33)
(6)
CUSTOM SIZING
400 Series ® Woodwright Double-Hung Full-Frame Windows
in 1⁄8" (3) increments
WOODWRIGHT DOUBLE-HUNG FULL-FRAME WINDOWS
®
SECTION REFERENCE Tables of Sizes ....................... 62-68 Specifications ........................ 66-73 Grille Patterns .............................. 74 Window Details ....................... 74-75 Joining Details.............................. 76 Combination Designs ................. 255 Performance Data ...................... 269 Warranty .............................290-291 Dimensions in parentheses are in millimeters.
59
WOODWRIGHT DOUBLE-HUNG FULL-FRAME WINDOWS ®
H A
FEATURES
M
Frame A Perma-Shield® exterior cladding protects
F L
the frame – beautifully. Best of all, it's lowmaintenance and never needs painting*.
B For exceptionally long-lasting performance, sill members are constructed with a wood core and a Fibrex® material exterior.
*
B
D
E Multiple weatherstripping systems
weathertightness and durability.
help provide a barrier against wind, rain and dust. The combination of spring tension vinyl, rigid vinyl and flexible bulb weatherstripping is efficient and effective.
M High-performance glass
the sash into wash mode.
H Balancers in the sash enable contractors to screw through the jamb during installation without interfering with the window's operation.
options include: • Low-E4® glass® • Low-E4® HeatLock™ glass • Low-E4® Sun glass • Low-E4® SmartSun™ glass • Low-E4® SmartSun™ HeatLock™ glass Tempered glass and other glass options are available. Contact your Andersen supplier. A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite.
G K
I
Woodwright® double-hung full-frame windows are available with Stormwatch® protection. For more information contact your Andersen supplier. Performance Grade (PG) Upgrade
I Natural wood sash interior with classic chamfer detailing. Available in pine, oak, maple or prefinished White.
J Low-maintenance sash exterior provides long-lasting* protection and performance. Sash exteriors on most units include Fibrex® material.
K Sash joints simulate the look of traditional mortise-and-tenon construction inside and out.
Forest Green
Dark Bronze
Black
Terratone
Pine
White
Maple
Oak
HARDWARE FINISHES
Antique Brass
Bright Brass
Oil Rubbed Polished Bronze Chrome
Brushed Chrome
Distressed Distressed Bronze Nickel
Satin Nickel
Stone
White
Distressed bronze and oil rubbed bronze are "living" finishes that will change with time and use.
DOUBLE-HUNG HARDWARE STANDARD
ESTATE™
Lock & Keeper
Lock & Keeper
Stone | White
Antique Brass | Bright Brass Brushed Chrome | Distressed Bronze Distressed Nickel | Oil Rubbed Bronze Polished Chrome | Satin Nickel
Patterned Glass Patterned glass options are available. See page 10 for more details.
Wood Jamb Liner
Sandtone
Naturally occurring variations in grain, color and texture of wood make each window one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
Glass L Silicone bed glazing provides superior
Sash G Slide wash assists make it easy to tilt
Canvas
E
the head, sill and sides of the outer frame helps secure the unit to the structure.
exterior jamb liner is White. For all other units, the exterior jamb liner is gray.
White
C
pine, oak, maple and prefinished White. Wood jamb liners add beauty and authenticity to the window interior.
F For units with White exterior color,
INTERIOR
K J
C Natural wood stops are available in
D A factory-applied rigid vinyl flange on
EXTERIOR
Performance upgrades are available for select sizes allowing these units to achieve higher performance ratings. Performance Grade (PG) Ratings replace Design Pressure (DP) Ratings for measuring product performance. For up-to-date performance information of individual products, please visit andersenwindows.com. Use of this option will subtract 5⁄8" (16) from clear opening height.
The cam-operated lock & keeper is designed for easy operation and long life* and comes standard. Stone is standard with natural interior units. White finish comes with prefinished White interiors.
Optional Estate lock & keeper reduces the clear opening height by 9⁄16" (14). Check with local building code officials to determine compliance with egress requirements.
OPTIONAL DOUBLE-HUNG LIFT HARDWARE
**
Hand Lift
ESTATE™
Finger Lifts
Antique Brass | Bright Brass | Brushed Chrome | Distressed Bronze Distressed Nickel | Oil Rubbed Bronze | Polished Chrome | Satin Nickel
TRADITIONAL Hand Lift
Finger Lifts
Bar Lift
Antique Brass | Bright Brass | Brushed Chrome | Oil Rubbed Bronze Polished Chrome | Satin Nickel | Stone | White
* Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 400 Series Limited Warranty.
CLASSIC SERIES™ Hand Lift
Finger Lifts
** Hardware sold separately. Dimensions in parentheses are in millimeters. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
Stone | White Bold name denotes finish shown.
60
Sash Lift
ACCESSORIES Sold Separately Frame
Woodwright® windows are available in the following shapes.
Extension Jambs
Rectangular Double-Hung
Standard jamb depth is 4 1⁄2" (114). Jamb depth can be 4 1⁄8" (105) if installation flange is reversed. Extension jambs are available in unfinished pine or prefinished White. Some sizes may be veneered. Factory-applied and non-applied interior extension jambs are available in 1⁄16" (1.5) increments between 5 1⁄4" (133) and 7 1⁄8" (181). Extension jambs can be factory-applied to either three sides (stool and apron application) or four sides (picture frame casing).
Arch Double-Hung
Pine Stool
Storm/Insect Screen Combination Unit
Insect Screens
A self-storing storm window combined with an insect screen provides greater energy efficiency, while allowing ventilation when needed. They can be easily installed on the exterior of most 400 Series fullframe double-hung windows.
Choose full insect screen or half insect screen. Half insect screen (shown above) allows ventilation without affecting the view through the upper sash. Frames are available in colors to match product exteriors.
Insect Screen Frames
Available in White, Sandtone and Terratone colors to match product exteriors. Canvas, Forest Green, Dark Bronze and Black available by special order. Construction Constructed with an aluminum frame, single-pane upper and lower glass panels and charcoal powder-coated aluminum screen mesh.
Springline Single-Hung ™
A clear pine stool is available and ready for finishing. The Woodwright® stool is available in 4 9⁄16" (116) for use in wall depths up to 5 1⁄4" (133), and 6 9⁄16" (167) for use in wall depths up to 7 1⁄8" (181). Works with 2 1⁄4" (57) and 2 1⁄2" (64) wide casings. 400 Series Tilt-Wash double-hung window shown.
Unequal Leg Arch Double-Hung
Sash
Sash Options*
Window Opening Control Device Kit
Cottage Style
Reverse Cottage Style
For more information about glass, patterned glass, grilles and TruScene® insect screen see pages 10-16.
A Window Opening Control Device Kit is available, which limits sash travel to less than 4" (102) when the window is first opened. Available in Stone and White. Device shown on a 400 Series Tilt-Wash double-hung window.
Energy Efficiency Combination units can improve energy efficiency by as much as 35% over windows with clear dual-pane glass and 25% over windows with Low-E glass. Sound Reduction Combination units can improve Sound Transmission Class (STC) and Outdoor Indoor Transmission Class (OITC) ratings. Ideal for projects near airports, busy roadways or other noisy environments. For example, adding a combination unit to a 400 Series Tilt-Wash double-hung (3862) unit with Low-E4® glass will improve its STC rating from 26 to 32. Contact your Andersen supplier for additional STC and OITC rating information. NOTE: Do not add combination units to windows with Low-E4 Sun glass, unless window glass is tempered. Application of combination units may affect the performance of Low-E4 and Low-E4 SmartSun™ glass exterior coating. Combination units may also reduce the overall clear operable area of the window. See your local code official for egress requirements in your area.
TruScene ® Insect Screen Exclusive Andersen® TruScene® insect screens provide over 50% more clarity than our conventional insect screens for a beautiful unobstructed view. They allow more fresh air and sunlight in, while doing a better job of keeping out small insects. Conventional Insect Screen Conventional insect screens have charcoal powder-coated aluminum screen mesh.
Grilles Grilles are available in a variety of configurations and widths. For double-hung grille patterns see page 74.
Exterior Trim This product is available with Andersen® Exterior Trim. See pages 215-220 for details. CAUTION: • Painting and staining may cause damage to rigid vinyl. • 400 Series windows in Terratone color may be painted any color lighter than Terratone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Terratone any color darker than Terratone. • Do not paint 400 Series windows with White, Canvas, Sandtone, Forest Green, Dark Bronze or Black exterior colors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
For more information about combination designs, product performance, installation accessories and warranty see pages 255-291 or visit
andersenwindows.com
* Shown on 400 Series Tilt-Wash double-hung full-frame windows. Dimensions in parentheses are in millimeters.
61
400 Series ® Woodwright Double-Hung Full-Frame Windows
Shapes
WOODWRIGHT DOUBLE-HUNG FULL-FRAME WINDOWS ®
Table of Woodwright® Double-Hung Window Sizes
Notes on the next page also apply to this page.
Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Window Dimension
1'-9 5 ⁄ 8" (549)
2'-1 5 ⁄ 8" (651)
2'-5 5 ⁄ 8" (752)
2'-7 5 ⁄ 8" (803)
2'-9 5 ⁄ 8" (854)
2'-11 5 ⁄ 8" (905)
3'-1 5 ⁄ 8" (956)
3'-5 5 ⁄ 8" (1057)
3'-9 5 ⁄ 8" (1159)
Minimum Rough Opening
1'-10 1 ⁄ 8" (562)
2'-2 1 ⁄ 8" (664)
2'-6 1 ⁄ 8" (765)
2'-8 1 ⁄ 8" (816)
2'-10 1 ⁄ 8" (867)
3'-0 1 ⁄ 8" (917)
3'-2 1 ⁄ 8" (968)
3'-6 1 ⁄ 8" (1070)
3'-10 1 ⁄ 8" (1172)
Unobstructed Glass (lower sash only)
15 5 ⁄ 8" (397)
19 5 ⁄ 8" (498)
23 5 ⁄ 8" (600)
25 5 ⁄ 8" (651)
27 5 ⁄ 8" (702)
29 5 ⁄ 8" (752)
31 5 ⁄ 8" (803)
35 5 ⁄ 8" (905)
39 5 ⁄ 8" (1006)
WDH18210 WDH20210 WDH24210 WDH26210 WDH28210 WDH210210
WDH30210
WDH34210
WDH38210
WDH1832 WDH2032 WDH2432
WDH2632
WDH2832
WDH21032
WDH3032
WDH3432
WDH3832
WDH1836 WDH2036 WDH2436
WDH2636
WDH2836
WDH21036
WDH3036
WDH3436
WDH3836
WDH18310 WDH20310 WDH24310 WDH26310 WDH28310 WDH210310
WDH30310
WDH34310
WDH38310
CUSTOM HEIGHTS — 2'-8" to 6'-4 7 ⁄ 8"
13 3 ⁄ 8" (340) 15 3 ⁄ 8" (391) 17 3 ⁄ 8" (441) 19 3 ⁄ 8" (492) 21 3 ⁄ 8" (543)
WDH2642
WDH2842
WDH21042
WDH3042
WDH3442
WDH3842
WDH1846 WDH2046 WDH2446
WDH2646
WDH2846
WDH21046
WDH3046◊
WDH3446◊
WDH3846◊
WDH28410 WDH210410◊ WDH30410◊
WDH34410◊
WDH38410◊
23 3 ⁄ 8" (594)
WDH1842 WDH2042 WDH2442
25 3 ⁄ 8" (645)
3'-0 7 ⁄ 8" (937) 3'-4 7 ⁄ 8" (1038) 3'-8 7 ⁄ 8" (1140) 4'-0 7 ⁄ 8" (1241) 4'-4 7 ⁄ 8" (1343) 4'-8 7 ⁄ 8" (1445) 5'-0 7 ⁄ 8" (1546)
5'-0 7 ⁄ 8" (1546)
4'-8 7 ⁄ 8" (1445)
4'-4 7 ⁄ 8" (1343)
4'-0 7 ⁄ 8" (1241)
3'-8 7 ⁄ 8" (1140)
3'-4 7 ⁄ 8" (1038)
3'-0 7 ⁄ 8" (937)
CUSTOM WIDTHS — 1'-4 1 ⁄ 2" to 3'-9 5 ⁄ 8"
27 3 ⁄ 8" (695)
WDH2652
WDH2852◊
WDH21052◊
WDH3052◊
WDH3452◊
WDH3852◊
WDH1856 WDH2056 WDH2456
WDH2656◊
WDH2856◊
WDH21056◊
WDH3056◊
WDH3456◊
WDH3856◊
WDH18510 WDH20510 WDH24510◊ WDH26510◊ WDH28510◊ WDH210510◊ WDH30510◊
WDH34510◊
WDH38510◊
WDH3462◊
WDH3862◊
31 3 ⁄ 8" (797)
29 3 ⁄ 8" (746)
WDH1852 WDH2052 WDH2452
33 3 ⁄ 8" (848)
5'-4 7 ⁄ 8" (1648) 5'-8 7 ⁄ 8" (1749) 6'-0 7 ⁄ 8" (1851) 6'-4 7 ⁄ 8" (1953)
6'-4 7 ⁄ 8" (1953)
6'-0 7 ⁄ 8" (1851)
5'-8 7 ⁄ 8" (1749)
5'-4 7 ⁄ 8" (1648)
WDH18410 WDH20410 WDH24410 WDH26410
WDH1862 WDH2062 WDH2462◊ WDH2662◊ 62
WDH2862◊
WDH21062◊
WDH3062◊
2:3 cottage or 3:2 reverse cottage sash ratio available for all widths and heights. Size tables for windows with cottage or reverse cottage sash are now available on andersenwindow.com. CUSTOM WIDTHS — 1'-4 1/2" (419) to 3'-9 5/8" (1159) CUSTOM HEIGHTS — 3'-0 7/8" (937) to 6'-4 7/8" (1953)
Cottage
Reverse Cottage
® ® ™ ™ TableTable of Woodwright of Woodwright Springline Springline Single-Hung Single-Hung Window Window SizesSizes
1 ⁄ 8" (3) 1 ⁄ 8= ScaleScale " (3) 1'-0" = 1'-0" (305)(305) — 1:96 — 1:96
WindowWindow Dimension Dimension
" 5 ⁄ 8" " 5 ⁄ 8" 2'-7 5 ⁄ 82'-7 2'-1 5 ⁄ 82'-1 " 5 ⁄ 8" 2'-5 5 ⁄ 82'-5 (803) (803) (651) (651) (752) (752)
" 5 ⁄ 8" 2'-9 5 ⁄ 82'-9 (854) (854)
⁄ 8" 5 ⁄ 8" 2'-11 5 2'-11 (905) (905)
3'-1 5 ⁄ 83'-1 " 5 ⁄ 8" (956) (956)
" 5 ⁄ 8" 3'-5 5 ⁄ 83'-5 (1057)(1057)
3'-9 5 ⁄ 83'-9 " 5 ⁄ 8" (1159)(1159)
Minimum Minimum Rough Opening Rough Opening
⁄ 8" 1 ⁄ 8" " 1 ⁄ 8" 2'-8 1 ⁄ 82'-8 " 1 ⁄ 8" 2'-10 12'-10 " 1 ⁄ 8" 2'-6 1 ⁄ 82'-6 2'-2 1 ⁄ 82'-2 (816) (816) (867) (867) (664) (664) (765) (765)
" 1 ⁄ 8" 3'-0 1 ⁄ 83'-0 (917) (917)
" 1 ⁄ 8" 3'-2 1 ⁄ 83'-2 (968) (968)
" 1 ⁄ 8" 3'-6 1 ⁄ 83'-6 (1070)(1070)
⁄ 8" 1 ⁄ 8" 3'-10 13'-10 (1172)(1172)
29 5 ⁄ 8"29 5 ⁄ 8" (752) (752)
31 5 ⁄ 8" 31 5 ⁄ 8" (803) (803)
35 5 ⁄ 8"35 5 ⁄ 8" (905) (905)
39 5 ⁄ 8"39 5 ⁄ 8" (1006)(1006)
25 5 ⁄ 8" 25 5 ⁄ 8" (651) (651)
(579)
(579)
22 13 ⁄ 16"
22 13 ⁄ 16"
5'-2 13 ⁄ 16" (1595) 5'-2 13 ⁄ 16" (1595)
WS3442WS3442
increments. increments.
Grille patterns Grille patterns shownshown on page on 74. page 74.
WS3842WS3842
WS3852WS3852
6'-7 13 ⁄ 16" (2028) 6'-7 13 ⁄ 16" (2028)
WS3452WS3452
Minimum Minimum rough rough opening opening heightheight is the is same the same as as
400 Series ® Woodwright Double-Hung Full-Frame Windows
the window the window dimension dimension height.height. UpperUpper sash does sash does not operate not operate and lower and lower
sash travel sash travel is limited is limited by by the radius the radius of the of upper the upper
WS38410 WS38410 sash. Contact sash. Contact your your
5'-11 13 ⁄ 16" (1824) 5'-11 13 ⁄ 16" (1824)
WS34410 WS34410
5'-9 13 ⁄ 16" (1773) 5'-9 13 ⁄ 16" (1773)
WS3846WS3846
5'-8 13 ⁄ 16" (1748) 5'-8 13 ⁄ 16" (1748)
5'-6 13 ⁄ 16" (1697) 5'-6 13 ⁄ 16" (1697)
WS3446WS3446
6'-5 13 ⁄ 16" (1977) 6'-5 13 ⁄ 16" (1977)
WS3052WS3052
6'-3 13 ⁄ 16" (1926) 6'-3 13 ⁄ 16" (1926)
WS21052 WS21052
6'-2 13 ⁄ 16" (1901) 6'-2 13 ⁄ 16" (1901)
6'-1 13 ⁄ 16" (1875) 6'-1 13 ⁄ 16" (1875)
WS2852WS2852
5'-5 13 ⁄ 16" (1672) 5'-5 13 ⁄ 16" (1672)
5'-3 13 ⁄ 16" (1621) 5'-3 13 ⁄ 16" (1621)
5'-1 13 ⁄ 16" (1570) 5'-1 13 ⁄ 16" (1570)
WS3046WS3046
5'-7 13 ⁄ 16" (1722) 5'-7 13 ⁄ 16" (1722)
5'-6 13 ⁄ 16" (1697) 5'-6 13 ⁄ 16" (1697)
5'-5 13 ⁄ 16" (1672) 5'-5 13 ⁄ 16" (1672)
5'-4 13 ⁄ 16" (1646) 5'-4 13 ⁄ 16" (1646) 6'-0 13 ⁄ 16" (1850) 6'-0 13 ⁄ 16" (1850)
(1825) 5'-11 13 ⁄ 16" (1825)
5'-11 13 ⁄ 16"
4'-9"
(1449)
5'-9 13 ⁄ 16" (1774) 5'-9 13 ⁄ 16" (1774)
(1449)
29 3 ⁄ 8" (746) 4'-9"
(529)
(529)
5'-0 13 ⁄ 16" (1545) 5'-0 13 ⁄ 16" (1545)
4'-10 13 ⁄ 16" (1494) 4'-10 13 ⁄ 16" (1494)
WS3042WS3042
5'-4 13 ⁄ 16" (1646) 5'-4 13 ⁄ 16" (1646)
WS21046 WS21046
5'-3 13 ⁄ 16" (1621) 5'-3 13 ⁄ 16" (1621)
WS2846WS2846
5'-2 13 ⁄ 16" (1595) 5'-2 13 ⁄ 16" (1595)
5'-1 13 ⁄ 16" (1570) 5'-1 13 ⁄ 16" (1570)
5'-0 13 ⁄ 16"
(1545) 5'-0 13 ⁄ 16" (1545) (1621) 5'-3 13 ⁄ 16" (1621)
4'-1"
5'-3 13 ⁄ 16"
5'-1 13 ⁄ 16" (1570) 5'-1 13 ⁄ 16" (1570)
(1245)
(1245)
27 3 ⁄ 8" (695) 4'-1"
(695)
27 3 ⁄ 8"
WS2052WS2052 WS2452WS2452 WS2652WS2652
(746)
20 13 ⁄ 16"
20 13 ⁄ 16"
(478)
(478)
18 13 ⁄ 16"
18 13 ⁄ 16"
(452)
(452)
17 13 ⁄ 16"
17 13 ⁄ 16"
4'-9 13 ⁄ 16" (1468) 4'-9 13 ⁄ 16" (1468)
WS21042 WS21042
5'-0 13 ⁄ 16" (1545) 5'-0 13 ⁄ 16" (1545)
4'-11 13 ⁄ 16" (1519) 4'-11 13 ⁄ 16" (1519)
4'-10 13 ⁄ 16" (1494) 4'-10 13 ⁄ 16" (1494)
(1468) 4'-9 13 ⁄ 16" (1468)
4'-9 13 ⁄ 16"
4'-7 13 ⁄ 16" (1418)
(1168)
3'-10"
WS2842WS2842
1 ⁄ 8" (3) are available are available in 1 ⁄ 8"in(3)
™ only:™ only: Springline Springline
4'-10 13 ⁄ 16" (1494) 4'-10 13 ⁄ 16" (1494)
(1168)
25 3 ⁄ 8" (645) 3'-10"
(645)
(427)
(427)
4'-8 13 ⁄ 16" (1443) 4'-8 13 ⁄ 16" (1443)
4'-7 13 ⁄ 16" (1418) 4'-7 13 ⁄ 16" (1418)
(1392) 4'-6 13 ⁄ 16" (1392)
4'-6 13 ⁄ 16"
4'-4 13 ⁄ 16" (1341)
(1016)
WS2042WS2042 WS2442WS2442 WS2642WS2642
WS24410 WS26410 WS30410 WS20410 WS20410 WS24410 WS28410 WS210410 WS26410 WS28410 WS210410 WS30410
29 3 ⁄ 8"
Custom-size Custom-size windows windows
Radius Radius and Chord and Height Chord Height
WS2046WS2046 WS2446WS2446 WS2646WS2646
25 3 ⁄ 8"
27 5 ⁄ 8" 27 5 ⁄ 8" (702) (702)
16 13 ⁄ 16"
16 13 ⁄ 16"
(402)
(402)
15 13 ⁄ 16"
15 13 ⁄ 16"
(376)
(376)
14 13 ⁄ 16"
14 13 ⁄ 16"
(325)
12 13 ⁄ 16"
4'-7 13 ⁄ 16" 4'-4 13 ⁄ 16" 12 13 ⁄ 16" — 4'-4 13 ⁄ 16" (325) to 6'-4 1 ⁄ 2" (1418)CUSTOM HEIGHTS (1341)
3'-4"— 4'-4Shoulder 3'-7" CUSTOM HEIGHTS 13 ⁄ 16" toHeight 6'-4 1 ⁄ 2"
23 5 ⁄ 8"23 5 ⁄ 8" (600) (600)
5 ⁄ 82'-1 5 ⁄ 83'-9 ⁄ 8" to " to 53'-9 " 5 ⁄ 8" CUSTOM CUSTOM WIDTHS WIDTHS — 2'-1 — 13 ⁄ 16" (427) 13 ⁄ 16" (579) 13 ⁄ 16" (376) 13 ⁄ 16" (529) 22 13 ⁄ 1622 13 ⁄ 16" (402) 13 ⁄ 16" (478)20 13 ⁄ 1620 13 ⁄ 16" (325) 13 ⁄ 16" (452) " (427) 16 13 ⁄ 1616 " (579) 14 13 ⁄ 1614 " (376) 15 13 ⁄ 1615 " (529) " (402) " (478) 18 13 ⁄ 1618 " (325) 12 13 ⁄ 1612 17 13 ⁄ 1617 " (452)
(1092)
(lower sash only)
Unobstructed Glass Shoulder (lower sashHeight only) (1016) (1092)
21 3 ⁄ 8" (543) 3'-4"
21 3 ⁄ 8"
(543) (594)
23 3 ⁄ 8"
23 3 ⁄ 8" (594) 3'-7"
Unobstructed Glass
Unobstructed Unobstructed Glass Glass 19 5 ⁄ 8" 19 5 ⁄ 8" (lower sash (lower only) sash only) (498) (498)
Andersen Andersen supplier supplier for for cottagecottage and reverse and reverse
cottagecottage sash availability. sash availability. Side-by-side Side-by-side joiningjoining is is not recommended. not recommended. Rectangular Rectangular only: only: Size tables Size tables for windows for windows with cottage with cottage or or
WS2056WS2056 WS2456WS2456 WS2656WS2656
WS2856WS2856
WS21056 WS21056
WS3056WS3056
WS3456WS3456
WS3856WS3856 reversereverse cottagecottage sash sash
WS2062WS2062 WS2462WS2462 WS2662WS2662
WS2862WS2862
WS21062 WS21062
WS3062WS3062
andersenwindows.com. andersenwindows.com.
WS38510 WS38510
7'-2 1 ⁄ 2" (2197) 7'-2 1 ⁄ 2" (2197)
WS34510 WS34510
7'-0 1 ⁄ 2" (2146) 7'-0 1 ⁄ 2" (2146)
6'-10 1 ⁄ 2" (2096) 6'-10 1 ⁄ 2" (2096)
6'-9 1 ⁄ 2" (2070) 6'-9 1 ⁄ 2" (2070)
6'-8 1 ⁄ 2" (2045) 6'-8 1 ⁄ 2" (2045)
6'-7 1 ⁄ 2" (2019) 6'-7 1 ⁄ 2" (2019)
(1994) 6'-6 1 ⁄ 2" (1994)
6'-6 1 ⁄ 2"
6'-4 1 ⁄ 2" (1943) 6'-4 1 ⁄ 2" (1943)
(1618)
5'-3 11 ⁄ 16"
(1618)
33 3 ⁄ 8" 5'-3 11 ⁄ 16" (848)
(848)
33 3 ⁄ 8"
WS24510 WS26510 WS20510 WS20510 WS24510 WS30510 WS26510 WS28510 WS210510 WS30510 WS28510 WS210510
6'-11 3 ⁄ 16" (2113) 6'-11 3 ⁄ 16" (2113)
6'-9 3 ⁄ 16" (2062) 6'-9 3 ⁄ 16" (2062)
6'-7 3 ⁄ 16" (2011) 6'-7 3 ⁄ 16" (2011)
6'-6 3 ⁄ 16" (1986) 6'-6 3 ⁄ 16" (1986)
6'-5 3 ⁄ 16" (1961) 6'-5 3 ⁄ 16" (1961)
6'-4 3 ⁄ 16" (1935) 6'-4 3 ⁄ 16" (1935)
(1910) 6'-3 3 ⁄ 16" (1910)
6'-3 3 ⁄ 16"
6'-1 13 ⁄ 16" (1859) 6'-1 13 ⁄ 16" (1859)
(1534)
5'-0 3 ⁄ 8"
(1534)
31 3 ⁄ 8" (797) 5'-0 3 ⁄ 8"
(797)
31 3 ⁄ 8"
are now areavailable now available on on
WS3462WS3462
WS3862WS3862
• "Window • "Window Dimension" Dimension" always refers alwaystorefers outside to outside frame toframe frametodimension. frame dimension. • "Minimum • "Minimum Rough Opening" Rough Opening" dimensions dimensions may need may to need be increased to be increased to allowtoforallow use of forbuilding use of building wraps, flashing, wraps, flashing, sill panning, sill panning, brackets, brackets, fasteners fasteners or otheroritems. otherSee items. pages See288-289 pages 288-289 for morefordetails. more details. • Dimensions • Dimensions in parentheses in parentheses are in millimeters. are in millimeters. 2, clear opening , clearmopening width ofwidth 20" (508) of 20"and (508) clearand opening clear opening height ofheight 24" (210). of 24"See (210). tables Seeontables pageson69-71. pages 69-71. ◊Meet or◊Meet exceed or clear exceed opening clear opening area of 5.7 areasq. of ft. 5.7orsq. 0.53 ft. or m20.53
63
64
WA1862
WA2062
WA2462
WA2662
WA2862◊
WA21062◊
WA210510◊
WA3062◊
WA3052
WA3056
WA30510◊
WA3462◊
(1594)
(1492)
4'-10 3 ⁄4"
WA30410
5'-2 3 ⁄4"
(1391)
4'-6 3 ⁄4"
(1405)
4'-7 5 ⁄ 16"
WA3046
(1695)
(1507)
(1289)
4'-2 3 ⁄4"
(1303)
4'-3 5 ⁄ 16"
WA3042
5'-6 3 ⁄4"
WA21056 4'-11 5 ⁄ 16"
(1316)
4'-3 13 ⁄ 16"
(1187)
3'-10 3 ⁄4"
(1202)
3'-11 5 ⁄ 16"
(1214)
3'-11 13 ⁄ 16" WA30310
(1797)
WA21052
(1608)
WA210410
5'-3 5 ⁄ 16"
WA21046
(1710)
(1418)
4'-7 13 ⁄ 16"
WA21042
5'-7 5 ⁄ 16"
(1519)
(1221)
4'-0 1 ⁄ 16" WA210310
5'-10 3 ⁄4"
WA28510 4'-11 13 ⁄ 16"
(1322)
4'-4 1 ⁄ 16"
(1100)
3'-7 5 ⁄ 16"
(1113)
3'-7 13 ⁄ 16"
(1119)
3'-8 1 ⁄ 16"
(1127)
3'-8 3 ⁄ 8"
(1026)
3'-4 3 ⁄ 8"
(1032)
3'-4 5 ⁄ 8" WA2632
(1811)
WA2856
(1621)
WA2852
5'-3 13 ⁄ 16"
WA28410
(1722)
(1424)
4'-8 1 ⁄ 16"
(1229)
4'-0 3 ⁄ 8"
(1133)
3'-8 5 ⁄ 8"
(1038)
3'-4 7 ⁄ 8"
13 3 ⁄ 8" (340)
3'-0 7 ⁄ 8" (937)
3'-0 7 ⁄ 8" (937)
(862)
(964)
(930)
3'-0 5 ⁄ 8"
(937)
3'-0 7 ⁄ 8"
(951)
3'-1 7 ⁄ 16"
2'-9 15 ⁄ 16"
3'-1 15 ⁄ 16"
Shoulder Height
(156)
6 1 ⁄ 8"
(141)
5 9 ⁄ 16"
(129)
5 1 ⁄ 16"
(122)
4 13 ⁄ 16"
(114)
4 1 ⁄ 2"
(108)
4 1 ⁄4"
(102)
4"
(87)
3 7 ⁄ 16"
(75)
2 15 ⁄ 16"
Table of Woodwright® Arch Double-Hung Window Sizes
5'-11 5 ⁄ 16"
WA26510 (1526)
WA2846
5'-7 13 ⁄ 16"
WA2656 5'-0 1 ⁄ 16"
(1330)
4'-4 3 ⁄ 8" WA2842
(1824)
WA2652
(1627)
WA26410
5'-4 1 ⁄ 16"
WA2646
(1729)
(1432)
WA28310
5'-11 13 ⁄ 16"
WA24510 4'-8 3 ⁄ 8"
WA2642
5'-8 1 ⁄ 16"
WA2456 (1534)
WA26310
(1830)
WA2452 5'-0 3 ⁄ 8"
WA24410
(1635)
WA2446
5'-4 3 ⁄ 8"
WA2442
(1737)
(1235)
4'-0 5 ⁄ 8"
WA24310
5'-8 3 ⁄ 8"
(1337)
4'-4 5 ⁄ 8" WA2636
6'-0 1 ⁄ 16"
WA20510 (1438)
WA2436
(1838)
WA2056 4'-8 5 ⁄ 8"
(1140)
3'-8 7 ⁄ 8"
(1053)
3'-5 7 ⁄ 16"
(1065)
3'-5 15 ⁄ 16"
15 3 ⁄ 8" (391)
3'-4 7 ⁄ 8" (1038)
3'-4 7 ⁄ 8" (1038)
2'-1 5 ⁄ 8" (651) 2'-5 5 ⁄ 8" (752) 2'-7 5 ⁄ 8" (803) 2'-9 5 ⁄ 8" (854) 2'-11 5 ⁄ 8" (905) 3'-1 5 ⁄ 8" (956) 3'-5 5 ⁄ 8" (1057) 3'-9 5 ⁄ 8" (1159)
Minimum Rough Opening 1'-10 1 ⁄ 8" (562) 2'-2 1 ⁄ 8" (664) 2'-6 1 ⁄ 8" (765) 2'-8 1 ⁄ 8" (816) 2'-10 1 ⁄ 8" (867) 3'-0 1 ⁄ 8" (917) 3'-2 1 ⁄ 8" (968) 3'-6 1 ⁄ 8" (1070) 3'-10 1 ⁄ 8" (1172)
15 5 ⁄ 8" (397) 19 5 ⁄ 8" (498) 23 5 ⁄ 8" (600) 25 5 ⁄ 8" (651) 27 5 ⁄ 8" (702) 29 5 ⁄ 8" (752) 31 5 ⁄ 8" (803) 35 5 ⁄ 8" (905) 39 5 ⁄ 8" (1006)
29 5 ⁄ 8" (752) 31 5 ⁄ 8" (803) 33 5 ⁄ 8" (854) 35 5 ⁄ 8" (905) 37 5 ⁄ 8" (956) 41 5 ⁄ 8" (1057) 45 5 ⁄ 8" (1159)
CUSTOM HEIGHTS — 3'-0 7 ⁄ 8" to 6'-4 7 ⁄ 8"
WA2432
6'-0 3 ⁄ 8"
WA2052 (1540)
WA20410
5'-0 5 ⁄ 8"
WA2046
(1641)
WA2042
5'-4 5 ⁄ 8"
(1241)
4'-0 7 ⁄ 8"
WA20310
(1743)
(1343)
4'-4 7 ⁄ 8"
WA2036
5'-8 5 ⁄ 8"
(1445)
4'-8 7 ⁄ 8"
(1154)
3'-9 7 ⁄ 16"
(1167)
3'-9 15 ⁄ 16"
17 3 ⁄ 8" (441)
3'-8 7 ⁄ 8" (1140)
3'-8 7 ⁄ 8" (1140)
WA2032
(1845)
(1546)
5'-0 7 ⁄ 8"
(1256)
4'-1 7 ⁄ 16"
(1268)
4'-1 15 ⁄ 16"
19 3 ⁄ 8" (492)
4'-0 7 ⁄ 8" (1241)
4'-0 7 ⁄ 8" (1241)
1'-9 5 ⁄ 8" (549)
21 5 ⁄ 8" (549) 25 5 ⁄ 8" (651)
6'-0 5 ⁄ 8"
WA1856
(1648)
WA1852
5'-4 7 ⁄ 8"
WA1846
(1749)
WA1842
5'-8 7 ⁄ 8"
(1357)
4'-5 7 ⁄ 16"
(1370)
4'-5 15 ⁄ 16"
21 3 ⁄ 8" (543)
4'-4 7 ⁄ 8" (1343)
4'-4 7 ⁄ 8" (1343)
WA1836
(1851)
(1459)
4'-9 7 ⁄ 16"
(1472)
4'-9 15 ⁄ 16"
23 3 ⁄ 8" (594)
4'-8 7 ⁄ 8" (1445)
4'-8 7 ⁄ 8" (1445)
WA1832
6'-0 7 ⁄ 8"
WA18510 (1561)
5'-1 7 ⁄ 16"
WA18410
(1662)
5'-5 7 ⁄ 16"
(1573)
5'-1 15 ⁄ 16"
25 3 ⁄ 8" (645)
5'-0 7 ⁄ 8" (1546)
5'-0 7 ⁄ 8" (1546)
WA18310
(1764)
5'-9 7 ⁄ 16"
(1675)
5'-5 15 ⁄ 16"
27 3 ⁄ 8" (695)
5'-4 7 ⁄ 8" (1648)
5'-4 7 ⁄ 8" (1648)
CUSTOM WIDTHS — 1'-9 5 ⁄ 8" to 3'-9 5 ⁄ 8"
Window Dimension
Radius
(1865)
(1776)
5'-9 15 ⁄ 16"
29 3 ⁄ 8" (746)
5'-8 7 ⁄ 8" (1749)
5'-8 7 ⁄ 8" (1749) Unobstructed Glass (lower sash only)
6'-1 7 ⁄ 16"
(1878)
31 3 ⁄ 8" (797)
6'-0 7 ⁄ 8" (1851)
6'-0 7 ⁄ 8" (1851)
Chord Height
6'-1 15 ⁄ 16"
33 3 ⁄ 8" (848)
6'-4 7 ⁄ 8" (1953)
6'-4 7 ⁄ 8" (1953)
WOODWRIGHT DOUBLE-HUNG FULL-FRAME WINDOWS ®
Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Notes on the next page also apply to this page.
WA18210
Side-by-side joining of arch
windows is not recommended.
WA2836
WA34310
WA3442 WA3842
WA3446 WA3846
WA34410 WA38410
WA3452 WA3852
WA3456
WA3856
WA34510◊
WA38510◊
WA3862◊
Table of Woodwright® Unequal Leg Arch Double-Hung Window Sizes Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Window Dimension
1'-9 5 ⁄ 8" (549)
2'-1 5 ⁄ 8" (651)
2'-5 5 ⁄ 8" (752)
2'-7 5 ⁄ 8" (803)
2'-9 5 ⁄ 8" (854)
2'-11 5 ⁄ 8" (905)
3'-1 5 ⁄ 8" (956)
3'-5 5 ⁄ 8" (1057)
3'-9 5 ⁄ 8" (1159)
Minimum Rough Opening
1'-10 1 ⁄ 8" (562)
2'-2 1 ⁄ 8" (664)
2'-6 1 ⁄ 8" (765)
2'-8 1 ⁄ 8" (816)
2'-10 1 ⁄ 8" (867)
3'-0 1 ⁄ 8" (917)
3'-2 1 ⁄ 8" (968)
3'-6 1 ⁄ 8" (1070)
3'-10 1 ⁄ 8" (1172)
15 5 ⁄ 8" (397)
19 5 ⁄ 8" (498)
23 5 ⁄ 8" (600)
25 5 ⁄ 8" (651)
27 5 ⁄ 8" (702)
29 5 ⁄ 8" (752)
31 5 ⁄ 8" (803)
35 5 ⁄ 8" (905)
39 5 ⁄ 8" (1006)
45 5 ⁄ 8" (1159)
45 5 ⁄ 8" (1159)
45 5 ⁄ 8" (1159)
Unobstructed Glass
(lower sash only)
(294)
11 9 ⁄ 16"
9 1 ⁄ 2"
(1249)
4'-1 3 ⁄ 16"
(1305)
4'-3 3 ⁄ 8"
(1354)
4'-5 5 ⁄ 16"
(1407)
4'-7 3 ⁄ 8"
(1456)
4'-9 5 ⁄ 16"
4'-11 3 ⁄ 8"
(1508)
(1557)
(1610)
5'-3 3 ⁄ 8"
5'-1 5 ⁄ 16"
WU38510
WU3462◊
(1659)
WU34510
(1711)
(1757)
5'-9 3 ⁄ 16"
WU3856
5'-5 5 ⁄ 16"
4'-5 3 ⁄ 16"
(1351) (1453)
4'-9 3 ⁄ 16" 5'-1 3 ⁄ 16"
(1554) (1656)
5'-5 3 ⁄ 16"
WU30510
WU3062◊
WU3852
WU3456
5'-7 3 ⁄ 8"
(1272) (1373) (1475) (1576)
5'-2 1 ⁄ 16" 5'-6 1 ⁄ 16"
(1678) (1779)
WU21062◊
WU3452
WU3056
WU210510 5'-10 1 ⁄ 16"
(1576)
WU2862
WU34410
WU3052
WU21056
WU28510
5'-2 1 ⁄ 16" WU2662
4'-10 1 ⁄ 16"
(1272)
4'-2 1 ⁄ 16" 4'-6 1 ⁄ 16"
(1373) (1475)
4'-10 1 ⁄ 16"
5'-0 1 ⁄ 8"
(1527) (1629)
5'-4 1 ⁄ 8"
(1675)
5'-5 15 ⁄ 16"
WU2856
WU26510
WU30410
WU21052
WU2852
WU2656
WU24510
WU2462
4'-6 1 ⁄ 16"
(1222)
4'-0 1 ⁄ 8" 4'-4 1 ⁄ 8"
(1324) (1426)
4'-8 1 ⁄ 8"
(1472) (1573)
5'-1 15 ⁄ 16"
(1651)
5'-5" 5'-9"
(1753)
4'-2 1 ⁄ 16"
3'-9 15 ⁄ 16"
(1167) (1370)
4'-5 15 ⁄ 16"
(1448)
4'-9" 5'-1"
4'-9 15 ⁄ 16"
WU2456
WU20510
WU2062
WU2652
legs is not recommended. WU3046
WU210410
WU26410
WU2452
WU2056
smooth arc. Joining short
WU21046
WU24410
WU2052
(1549)
(1611)
5'-3 7 ⁄ 16" 5'-7 7 ⁄ 16"
(1713) (1815)
5'-11 7 ⁄ 16"
(1268)
4'-1 15 ⁄ 16"
4'-5"
(1346)
4'-7 7 ⁄ 16"
(1408) (1510)
4'-11 7 ⁄ 16"
27 3 ⁄ 8" (695) 29 3 ⁄ 8" (746) 31 3 ⁄ 8" (797)
cottage sash availability.
400 Series ® Woodwright Double-Hung Full-Frame Windows
3'-9 3 ⁄ 16"
(1170)
3'-10 1 ⁄ 16"
(1148)
Joining long legs creates a
WU3042
WU21042
WU2446
WU20410
WU18510
33 3 ⁄ 8" (848)
(241)
(195)
7 11 ⁄ 16"
(173)
6 13 ⁄ 16"
(376)
14 13 ⁄ 16"
12 3 ⁄4"
(324)
(279)
(914)
3'-0" 3'-4" 3'-8"
(1118)
(1307)
4'-3 7 ⁄ 16"
23 3 ⁄ 8" (594) 25 3 ⁄ 8" (645)
5'-0 7 ⁄ 8" (1546) 5'-4 7 ⁄ 8" (1648) 5'-8 7 ⁄ 8" (1749)
for cottage and reverse
WU2046
WU1856 6'-0 7 ⁄ 8" (1851)
combination.
the upper sash. Contact
WU2042
WU1852
6'-4 7 ⁄ 8" (1953)
Unequal leg arch and arch
viewed from the exterior.
increments.
(1016)
(1205)
3'-11 7 ⁄ 16"
21 3 ⁄ 8" (543)
4'-4 7 ⁄ 8" (1343) 4'-8 7 ⁄ 8" (1445)
4'-8 7 ⁄ 8" (1445) 5'-0 7 ⁄ 8" (1546) 5'-4 7 ⁄ 8" (1648)
96" (2438)
are available in 1 ⁄ 8" (3)
your Andersen supplier
WU1862
96" (2438)
2 1 Choose type 1 or 2 as
limited by the radius of
WU18410
5'-8 7 ⁄ 8" (1749)
96" (2438)
Custom-size windows
Lower sash travel is
WU1846
6'-0 7 ⁄ 8" (1851)
96" (2438)
WU20310
WU1842
6'-4 7 ⁄ 8" (1953)
10 15 ⁄ 16"
7 7 ⁄ 8"
5 7 ⁄ 16"
(138)
(1103)
3'-7 7 ⁄ 16"
WU1836
WU18310 4'-4 7 ⁄ 8" (1343)
(200)
45 5 ⁄ 8" (1159) 45 5 ⁄ 8" (1159)
(1002)
3'-3 7 ⁄ 16"
Chord Height
Shoulder Height
CUSTOM HEIGHTS — 3'-8 7 ⁄ 8" to 6'-4 7 ⁄ 8"
17 3 ⁄ 8" (441) 19 3 ⁄ 8" (492)
3'-8 7 ⁄ 8" (1140) 4'-0 7 ⁄ 8" (1241)
4'-0 7 ⁄ 8" (1241)
3'-8 7 ⁄ 8" (1140)
CUSTOM WIDTHS — 1'-9 5 ⁄ 8" to 3'-9 5 ⁄ 8" Radius
WU3862◊
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. ◊ Meet or exceed clear opening area of 5.7 sq. ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (210). See tables on pages 71-73.
65
WOODWRIGHT DOUBLE-HUNG FULL-FRAME WINDOWS ®
Table of Woodwright® Transom Window Sizes Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Window Dimension
1'-9 5 ⁄ 8" (549)
2'-1 5 ⁄ 8" (651)
2'-5 5 ⁄ 8" (752)
2'-7 5 ⁄ 8" (803)
2'-9 5 ⁄ 8" (854)
2'-11 5 ⁄ 8" (905)
3'-1 5 ⁄ 8" (956)
3'-5 5 ⁄ 8" (1057)
3'-9 5 ⁄ 8" (1159)
3'-11 5 ⁄ 16" (1202)
Minimum Rough Opening
1'-10 1 ⁄8" (562)
2'-2 1 ⁄ 8" (664)
2'-6 1 ⁄ 8" (765)
2'-8 1 ⁄ 8" (816)
2'-10 1 ⁄ 8" (867)
3'-0 1 ⁄ 8" (917)
3'-2 1 ⁄ 8" (968)
3'-6 1 ⁄ 8" (1070)
3'-10 1 ⁄ 8" (1172)
3'-11 7 ⁄ 8" (1215)
15 5 ⁄ 8" (397)
19 5 ⁄ 8" (498)
23 5 ⁄ 8" (600)
25 5 ⁄ 8" (651)
27 5 ⁄ 8" (702)
29 5 ⁄ 8" (752)
31 5 ⁄ 8" (803)
35 5 ⁄ 8" (905)
39 5 ⁄ 8" (1006)
41 1 ⁄4" (1048)
Unobstructed Glass
20 1 ⁄ 8" (511)
WTR1810
WTR2010
WTR2410
WTR2610
WTR2810
WTR21010
WTR3010
WTR3410
WTR3810
WTR31010
WTR1815
WTR2015
WTR2415
WTR2615
WTR2815
WTR21015
WTR3015
WTR3415
WTR3815
WTR31015
WTR1817
WTR2017
WTR2417
WTR2617
WTR2817
WTR21017
WTR3017
WTR3417
WTR3817
WTR31017
WTR18111 WTR20111
WTR24111
WTR26111
WTR28111
WTR210111
WTR30111
WTR34111
WTR38111
WTR310111
WTR1821
WTR2021
WTR2421
WTR2621
WTR2821
WTR21021
WTR3021
WTR3421
WTR3821
WTR31021
WTR1823
WTR2023
WTR2423
WTR2623
WTR2823
WTR21023
WTR3023
WTR3423
WTR3823
WTR31023
WTR1827
WTR2027
WTR2427
WTR2627
WTR2827
WTR21027
WTR3027
WTR3427
WTR3827
WTR31027
WTR1831
WTR2031
WTR2431
WTR2631
WTR2831
WTR21031
WTR3031
WTR3431
WTR3831
WTR31031
34 1 ⁄ 8" (867)
28 1 ⁄ 8" (714)
CUSTOM HEIGHTS — 1' to 3'-3 5 ⁄ 16"
14 1 ⁄ 8" 6 13 ⁄ 16" (359) (173) 22 1 ⁄ 8" (562) 24 1 ⁄ 8" (613)
16 1 ⁄ 8" (410)
2'-1 7 ⁄ 8" 1'-9 7 ⁄ 8" 1'-7 7 ⁄ 8" 1'-0 1 ⁄ 2" (555) (504) (318) (657) 2'-3 7 ⁄ 8" (707) 2'-5 7 ⁄ 8" (758) 2'-9 7 ⁄ 8" (860) 3'-3 7 ⁄ 8" (1012)
2'-3 5 ⁄ 16" 2'-1 5 ⁄ 16" 1'-9 5 ⁄ 16" 1'-7 5 ⁄ 16" 1'-0 " (643) (541) (694) (491) (305) 2'-5 5 ⁄ 16" (745) 3'-3 5 ⁄ 16" (999)
2'-9 5 ⁄ 16" (846)
CUSTOM WIDTHS — 1' to 6'-3 5 ⁄ 16"
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
Woodwright® Transom Window Area Specifications Window Number
Glass Area Sq. Ft./(m2)
WTR1810
0.74
(0.07)
1.80
WTR1815
1.53
(0.14)
2.90
WTR1817
1.75
(0.16)
WTR18111
2.18
WTR1821
Woodwright® Transom Window Area Specifications Window Number
Glass Area Sq. Ft./(m2)
(0.17)
WTR2421
3.63
(0.34)
5.62
(0.27)
WTR2423
3.96
(0.37)
6.03
3.20
(0.30)
WTR2427
4.61
(0.43)
(0.20)
3.80
(0.35)
WTR2431
5.60
2.40
(0.22)
4.10
(0.38)
WTR2610
WTR1823
2.62
(0.24)
4.40
(0.41)
WTR1827
3.05
(0.28)
5.00
WTR1831
3.70
(0.34)
WTR2010
0.93
WTR2015
Woodwright® Transom Window Area Specifications Window Number
Glass Area Sq. Ft./(m2)
(0.52)
WTR21010
1.40
(0.13)
2.97
(0.28)
(0.56)
WTR21015
2.91
(0.27)
4.78
(0.44)
6.85
(0.64)
WTR21017
3.32
(0.31)
5.27
(0.49)
(0.52)
8.09
(0.75)
WTR210111
4.14
(0.38)
6.26
(0.58)
1.21
(0.11)
2.64
(0.24)
WTR21021
4.55
(0.42)
6.76
(0.63)
WTR2615
2.51
(0.23)
4.24
(0.39)
WTR21023
4.96
(0.46)
7.25
(0.67)
(0.46)
WTR2617
2.87
(0.27)
4.68
(0.43)
WTR21027
5.79
(0.54)
8.24
(0.77)
5.90
(0.55)
WTR26111
3.58
(0.33)
5.56
(0.52)
WTR21031
7.02
(0.65)
9.73
(0.90)
(0.09)
2.14
(0.20)
WTR2621
3.94
(0.37)
6.00
(0.56)
WTR3010
1.50
(0.14)
3.14
(0.29)
1.93
(0.18)
3.44
(0.32)
WTR2623
4.29
(0.40)
6.44
(0.60)
WTR3015
3.10
(0.29)
5.05
(0.47)
WTR2017
2.20
(0.20)
3.79
(0.35)
WTR2627
5.00
(0.46)
7.32
(0.68)
WTR3017
3.54
(0.33)
5.57
(0.52)
WTR20111
2.74
(0.25)
4.50
(0.42)
WTR2631
6.07
(0.56)
8.63
(0.80)
WTR30111
4.42
(0.41)
6.61
(0.61)
WTR2021
3.02
(0.28)
4.86
(0.45)
WTR2810
1.31
(0.12)
2.80
(0.26)
WTR3021
4.86
(0.45)
7.14
(0.66)
WTR2023
3.29
(0.31)
5.22
(0.48)
WTR2815
2.71
(0.25)
4.51
(0.42)
WTR3023
5.30
(0.49)
7.66
(0.71)
WTR2027
3.83
(0.36)
5.93
(0.55)
WTR2817
3.09
(0.29)
4.98
(0.46)
WTR3027
6.18
(0.57)
8.70
(0.81)
WTR2031
4.65
(0.43)
7.00
(0.65)
WTR28111
3.86
(0.36)
5.91
(0.55)
WTR3031
7.49
(0.70)
10.27
(0.95)
WTR2410
1.12
(0.10)
2.47
(0.23)
WTR2821
4.24
(0.39)
6.38
(0.59)
WTR3410
1.69
(0.16)
3.47
(0.32)
WTR2415
2.32
(0.22)
3.97
(0.37)
WTR2823
4.63
(0.43)
6.84
(0.64)
WTR3415
3.49
(0.32)
5.58
(0.52)
WTR2417
2.65
(0.25)
4.38
(0.41)
WTR2827
5.40
(0.50)
7.78
(0.72)
WTR24111
3.30
(0.31)
5.21
(0.48)
WTR2831
6.55
(0.61)
9.18
(0.85)
66
Overall Window Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2)
• Dimensions in parentheses are in square meters. continued on next page
4'-11 5 ⁄ 16" (1506)
5'-7 5 ⁄ 16" (1710)
6'-3 5 ⁄ 16" (1913)
4'-3 7 ⁄ 8" (1317)
4'-11 7 ⁄ 8" (1520)
5'-7 7 ⁄ 8" (1724)
6'-3 7 ⁄ 8" (1927)
45 1 ⁄4" (1149)
53 1 ⁄4" (1353)
61 1 ⁄4" (1556)
69 1 ⁄4" (1745)
WTR4210
WTR41010
WTR5610
WTR6210
WTR4215
WTR41015
WTR5615
WTR6215
WTR4217
WTR41017
WTR5617
WTR6217
WTR42111
WTR410111
WTR56111
WTR62111
WTR4221
WTR41021
WTR5621
WTR6221
WTR4223
WTR41023
WTR5623
WTR6223
WTR4227
WTR41027
WTR5627
WTR6227
WTR4231
WTR41031
WTR5631
WTR6231
Custom-size windows are available in 1 ⁄ 8" (3) increments Grille patterns shown on page 74.
400 Series ® Woodwright Double-Hung Full-Frame Windows
4'-3 5 ⁄ 16" (1303)
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
Woodwright® Transom Window Area Specifications (continued) Window Number
Glass Area Sq. Ft./(m2)
WTR3417
3.99
(0.37)
6.16
WTR34111
4.98
(0.46)
7.32
WTR3421
5.47
(0.51)
WTR3423
5.97
WTR3427
Woodwright® Transom Window Area Specifications
Overall Window Area Sq. Ft./(m2)
Woodwright® Transom Window Area Specifications
Window Number
Glass Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2)
Window Number
Glass Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2)
(0.57)
WTR31027
8.07
(0.75)
10.95
(1.02)
WTR5617
6.87
(0.64)
9.96
(0.93)
(0.68)
WTR31031
9.79
(0.91)
12.92
(1.20)
WTR56111
8.57
(0.80)
11.83
(1.10)
7.90
(0.73)
WTR4210
2.14
(0.20)
4.28
(0.40)
WTR5621
9.42
(0.88)
12.77
(1.19)
(0.55)
8.47
(0.79)
WTR4215
4.44
(0.41)
6.88
(0.64)
WTR5623
10.27
(0.95)
13.70
(1.27)
6.96
(0.65)
9.63
(0.89)
WTR4217
5.07
(0.47)
7.59
(0.71)
WTR5627
11.98
(1.11)
15.57
(1.45)
WTR3431
8.44
(0.78)
11.36
(1.06)
WTR42111
6.33
(0.59)
9.02
(0.84)
WTR5631
14.53
(1.35)
18.38
(1.71)
WTR3810
1.87
(0.17)
3.80
(0.35)
WTR4221
6.96
(0.65)
9.73
(0.90)
WTR6210
3.28
(0.30)
6.28
(0.58)
WTR3815
3.89
(0.36)
6.12
(0.57)
WTR4223
7.59
(0.71)
10.45
(0.97)
WTR6215
6.80
(0.63)
10.10
(0.94)
WTR3817
4.44
(0.41)
6.75
(0.63)
WTR4227
8.85
(0.82)
11.87
(1.10)
WTR6217
7.76
(0.72)
11.15
(1.04)
WTR38111
5.54
(0.51)
8.02
(0.75)
WTR4231
10.74
(1.00)
14.01
(1.30)
WTR62111
9.69
(0.90)
13.24
(1.23)
WTR3821
6.09
(0.57)
8.65
(0.80)
WTR41010
2.52
(0.23)
4.94
(0.46)
WTR6221
10.65
(0.99)
14.28
(1.33)
WTR3823
6.64
(0.62)
9.29
(0.86)
WTR41015
5.23
(0.49)
7.95
(0.74)
WTR6223
11.61
(1.08)
15.33
(1.42)
WTR3827
7.74
(0.72)
10.55
(0.98)
WTR41017
5.97
(0.55)
8.78
(0.82)
WTR6227
13.54
(1.26)
17.42
(1.62)
WTR3831
9.39
(0.87)
12.46
(1.16)
WTR410111
7.45
(0.69)
10.43
(0.97)
WTR6231
16.43
(1.53)
20.56
(1.91)
WTR31010
1.95
(0.18)
3.94
(0.37)
WTR41021
8.19
(0.76)
11.25
(1.05)
WTR31015
4.05
(0.38)
6.35
(0.59)
WTR41023
8.93
(0.83)
12.07
(1.12)
WTR31017
4.63
(0.43)
7.00
(0.65)
WTR41027
10.41
(0.97)
13.72
(1.27)
WTR310111
5.77
(0.54)
8.32
(0.77)
WTR41031
12.63
(1.17)
16.19
(1.50)
WTR31021
6.35
(0.59)
8.97
(0.83)
WTR5610
2.90
(0.27)
5.61
(0.52)
WTR31023
6.92
(0.64)
9.63
(0.89)
WTR5615
6.01
(0.56)
9.03
(0.84)
• Dimensions in parentheses are in square meters.
67
WOODWRIGHT DOUBLE-HUNG FULL-FRAME WINDOWS ®
Table of Woodwright® Picture Window Sizes Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Window Dimension Minimum Rough Opening Unobstructed Glass
1'-0" (305)
3'-1 5 ⁄ 8" (956)
3'-5 5 ⁄ 8" (1057)
3'-11 5 ⁄ 16" (1202)
4'-3 5 ⁄ 16" (1303)
4'-11 5 ⁄ 16" (1507)
5'-7 5 ⁄ 16" (1710)
1'-0 1 ⁄ 2" (318)
3'-2 1 ⁄ 8" (968)
3'-6 1 ⁄ 8" (1070)
3'-11 7 ⁄ 8" (1216)
4'-3 7 ⁄ 8" (1318)
4'-11 7 ⁄ 8" (1521)
5'-7 7 ⁄ 8" (1724)
6" (152)
31 5 ⁄ 8" (803)
35 5 ⁄ 8" (905)
41 1 ⁄4" (1048)
45 1 ⁄4" (1149)
53 1 ⁄4" (1353)
61 1 ⁄4" (1556)
CUSTOM HEIGHTS — 1'-2 1 ⁄ 2" to 6'-4 7 ⁄ 8"
41 1 ⁄ 8" (1045) 45 1 ⁄ 8" (1146) 49 1 ⁄ 8" (1248)
Custom-size windows are available in 1 ⁄ 8" (3) increments WPW10310 WPW30310 WPW34310 WPW310310
WPW42310
WPW410310
WPW56310
WPW1042 WPW3042
WPW3442
WPW31042
WPW4242
WPW41042
WPW5642
WPW1046
WPW3446
WPW31046
WPW4246
WPW41046
WPW5646
WPW42410
WPW410410
WPW56410
WPW3046
57 1 ⁄ 8" (1451)
5'-4 7 ⁄ 8" (1648)
5'-4 7 ⁄ 8" (1648)
WPW10410 WPW30410 WPW34410 WPW310410
WPW3052
WPW3452
WPW31052
WPW4252
WPW41052
WPW5652
WPW1056 WPW3056
WPW3456
WPW31056
WPW4256
WPW41056
WPW5656
WPW42510
WPW410510
WPW56510
WPW4262
WPW41062
WPW5662
61 1 ⁄ 8" (1553) 65 1 ⁄ 8" (1654)
5'-8 7 ⁄ 8" (1749) 6'-0 7 ⁄ 8" (1851)
6'-0 7 ⁄ 8" (1851)
5'-8 7 ⁄ 8" (1749)
WPW1052
69 1 ⁄ 8" (1756)
6'-4 7 ⁄ 8" (1953)
WPW10510 WPW30510 WPW34510 WPW310510
6'-4 7 ⁄ 8" (1953)
Grille patterns shown on page 74.
53 1 ⁄ 8" (1349)
4'-0 7 ⁄ 8" (1241) 4'-4 7 ⁄ 8" (1343) 4'-8 7 ⁄ 8" (1445) 5'-0 7 ⁄ 8" (1547)
5'-0 7 ⁄ 8" (1547)
4'-8 7 ⁄ 8" (1445)
4'-4 7 ⁄ 8" (1343)
4'-0 7 ⁄ 8" (1241)
CUSTOM WIDTHS — 1' to 5'-7 5 ⁄ 16"
WPW1062 WPW3062
WPW3462
WPW31062
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
68
Woodwright® Double-Hung Window Opening and Area Specifications Clear Opening Area Sq. Ft./(m2)
Width Inches/(mm)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Glass Vent Sq. Ft./(m2)
Top of Subfloor to Top of Inside Sill Stop Inches/(mm)
Overall Window Area Sq. Ft./(m2)
WDH18210
1.77
(0.16)
17 7/8"
(454)
14 1/4"
(362)
2.90
(0.27)
1.78
(0.17)
48 1/2"
(1231)
5.53
(0.51)
WDH1832
2.02
(0.19)
17 7/8"
(454)
16 1/4"
(412)
3.32
(0.31)
2.03
(0.19)
44 1/2"
(1130)
6.14
(0.57)
WDH1836
2.26
(0.21)
17 7/8"
(454)
18 1/4"
(463)
3.74
(0.35)
2.28
(0.21)
40 1/2"
(1028)
6.74
(0.63)
WDH18310
2.51
(0.23)
17 7/8"
(454)
20 1/4"
(514)
4.15
(0.39)
2.53
(0.24)
36 1/2"
(926)
7.34
(0.68)
WDH1842
2.76
(0.26)
17 7/8"
(454)
22 1/4"
(565)
4.57
(0.43)
2.78
(0.26)
32 1/2"
(825)
7.94
(0.74)
WDH1846
3.01
(0.28)
17 7/8"
(454)
24 1/4"
(616)
4.98
(0.46)
3.02
(0.28)
28 1/2"
(723)
8.54
(0.79)
WDH18410
3.26
(0.30)
17 7/8"
(454)
26 1/4"
(666)
5.40
(0.50)
3.27
(0.30)
24 1/2"
(622)
9.14
(0.85)
WDH1852
3.51
(0.33)
17 7/8"
(454)
28 1/4"
(717)
5.81
(0.54)
3.52
(0.33)
20 1/2"
(520)
9.74
(0.91)
WDH1856
3.76
(0.35)
17 7/8"
(454)
30 1/4"
(768)
6.23
(0.58)
3.02
(0.28)
16 1/2"
(418)
10.34
(0.96)
WDH18510
4.00
(0.37)
17 7/8"
(454)
32 1/4"
(819)
6.65
(0.62)
4.02
(0.37)
12 1/2"
(317)
10.94
(1.02)
WDH1862
4.25
(0.40)
17 7/8"
(454)
34 1/4"
(870)
7.06
(0.66)
4.26
(0.40)
8 1/2"
(215)
11.54
(1.07)
WDH20210
2.16
(0.20)
21 7/8"
(556)
14 1/4"
(362)
3.68
(0.34)
2.18
(0.20)
48 1/2"
(1231)
6.56
(0.61)
WDH2032
2.47
(0.23)
21 7/8"
(556)
16 1/4"
(412)
4.21
(0.39)
2.48
(0.23)
44 1/2"
(1130)
7.27
(0.68)
WDH2036
2.77
(0.26)
21 7/8"
(556)
18 1/4"
(463)
4.73
(0.44)
2.79
(0.26)
40 1/2"
(1028)
7.98
(0.74)
WDH20310
3.07
(0.29)
21 7/8"
(556)
20 1/4"
(514)
5.26
(0.49)
3.09
(0.29)
36 1/2"
(926)
8.69
(0.81)
WDH2042
3.38
(0.31)
21 7/8"
(556)
22 1/4"
(565)
5.79
(0.54)
3.40
(0.32)
32 1/2"
(825)
9.41
(0.87)
WDH2046
3.68
(0.34)
21 7/8"
(556)
24 1/4"
(616)
6.31
(0.59)
3.70
(0.34)
28 1/2"
(723)
10.12
(0.94)
WDH20410
3.99
(0.37)
21 7/8"
(556)
26 1/4"
(666)
6.84
(0.64)
4.00
(0.37)
24 1/2"
(622)
10.83
(1.01)
WDH2052
4.29
(0.40)
21 7/8"
(556)
28 1/4"
(717)
7.37
(0.69)
4.31
(0.40)
20 1/2"
(520)
11.54
(1.07)
WDH2056
4.60
(0.43)
21 7/8"
(556)
30 1/4"
(768)
7.89
(0.73)
3.70
(0.34)
16 1/2"
(418)
12.25
(1.14)
WDH20510
4.90
(0.46)
21 7/8"
(556)
32 1/4"
(819)
8.42
(0.78)
4.92
(0.46)
12 1/2"
(317)
12.96
(1.20)
WDH2062
5.20
(0.48)
21 7/8"
(556)
34 1/4"
(870)
8.95
(0.83)
5.22
(0.49)
8 1/2"
(215)
13.68
(1.27)
WDH24210
2.56
(0.24)
25 7/8"
(657)
14 1/4"
(362)
4.46
(0.41)
2.58
(0.24)
48 1/2"
(1231)
7.58
(0.70)
WDH2432
2.92
(0.27)
25 7/8"
(657)
16 1/4"
(412)
5.09
(0.47)
2.94
(0.27)
44 1/2"
(1130)
8.40
(0.78)
WDH2436
3.28
(0.31)
25 7/8"
(657)
18 1/4"
(463)
5.73
(0.53)
3.30
(0.31)
40 1/2"
(1028)
9.23
(0.86)
WDH24310
3.64
(0.34)
25 7/8"
(657)
20 1/4"
(514)
6.37
(0.59)
3.66
(0.34)
36 1/2"
(926)
10.05
(0.93)
WDH2442
4.00
(0.37)
25 7/8"
(657)
22 1/4"
(565)
7.01
(0.65)
4.02
(0.37)
32 1/2"
(825)
10.87
(1.01)
WDH2446
4.36
(0.41)
25 7/8"
(657)
24 1/4"
(616)
7.65
(0.71)
4.38
(0.41)
28 1/2"
(724)
11.70
(1.09)
WDH24410
4.71
(0.44)
25 7/8"
(657)
26 1/4"
(666)
8.28
(0.77)
4.74
(0.44)
24 1/2"
(622)
12.52
(1.16)
WDH2452
5.07
(0.47)
25 7/8"
(657)
28 1/4"
(717)
8.92
(0.83)
5.10
(0.47)
20 1/2"
(520)
13.34
(1.24)
WDH2456
5.44
(0.51)
25 7/8"
(657)
30 1/4"
(768)
9.56
(0.89)
4.38
(0.41)
16 1/2"
(418)
14.17
(1.32)
WDH24510 ◊
5.79
(0.54)
25 7/8"
(657)
32 1/4"
(819)
10.20
(0.95)
5.81
(0.54)
12 1/2"
(317)
14.99
(1.39)
WDH2462 ◊
6.15
(0.57)
25 7/8"
(657)
34 1/4"
(870)
10.84
(1.01)
6.17
(0.57)
8 1/2"
(215)
15.81
(1.47)
WDH26210
2.76
(0.26)
27 7/8"
(708)
14 1/4"
(362)
4.84
(0.45)
2.78
(0.26)
48 1/2"
(1231)
8.09
(0.75)
WDH2632
3.14
(0.29)
27 7/8"
(708)
16 1/4"
(412)
5.54
(0.52)
3.17
(0.30)
44 1/2"
(1130)
8.97
(0.83)
WDH2636
3.53
(0.33)
27 7/8"
(708)
18 1/4"
(463)
6.23
(0.58)
3.55
(0.33)
40 1/2"
(1028)
9.85
(0.92)
WDH26310
3.92
(0.36)
27 7/8"
(708)
20 1/4"
(514)
6.92
(0.64)
3.94
(0.37)
36 1/2"
(926)
10.73
(1.00)
WDH2642
4.30
(0.40)
27 7/8"
(708)
22 1/4"
(565)
7.62
(0.71)
4.33
(0.40)
32 1/2"
(825)
11.61
(1.08)
WDH2646
4.69
(0.44)
27 7/8"
(708)
24 1/4"
(616)
8.31
(0.77)
4.71
(0.44)
28 1/2"
(723)
12.49
(1.16)
WDH26410
5.08
(0.47)
27 7/8"
(708)
26 1/4"
(666)
9.01
(0.84)
5.10
(0.47)
24 1/2"
(622)
13.36
(1.24)
WDH2652
5.47
(0.51)
27 7/8"
(708)
28 1/4"
(717)
9.70
(0.90)
5.49
(0.51)
20 1/2"
(520)
14.24
(1.32)
WDH2656 ◊
5.86
(0.54)
27 7/8"
(708)
30 1/4"
(768)
10.39
(0.96)
4.71
(0.44)
16 1/2"
(418)
15.12
(1.41)
WDH26510 ◊
6.24
(0.58)
27 7/8"
(708)
32 1/4"
(819)
11.09
(1.03)
6.26
(0.58)
12 1/2"
(317)
16.00
(1.49)
WDH2662 ◊
6.63
(0.62)
27 7/8"
(708)
34 1/4"
(870)
11.78
(1.09)
6.65
(0.62)
8 1/2"
(215)
16.88
(1.57) (0.80)
WDH28210
2.95
(0.27)
29 7/8"
(759)
14 1/4"
(362)
5.23
(0.49)
2.98
(0.28)
48 1/2"
(1231)
8.61
WDH2832
3.37
(0.31)
29 7/8"
(759)
16 1/4"
(412)
5.98
(0.56)
3.39
(0.32)
44 1/2"
(1130)
9.54
(0.89)
WDH2836
3.78
(0.35)
29 7/8"
(759)
18 1/4"
(463)
6.73
(0.63)
3.81
(0.35)
40 1/2"
(1028)
10.47
(0.97)
WDH28310
4.20
(0.39)
29 7/8"
(759)
20 1/4"
(514)
7.48
(0.70)
4.22
(0.39)
36 1/2"
(926)
11.41
(1.06)
WDH2842
4.61
(0.43)
29 7/8"
(759)
22 1/4"
(565)
8.23
(0.77)
4.64
(0.43)
32 1/2"
(825)
12.34
(1.15)
WDH2846
5.03
(0.47)
29 7/8"
(759)
24 1/4"
(616)
8.98
(0.83)
5.05
(0.47)
28 1/2"
(723)
13.28
(1.23)
WDH28410
5.44
(0.51)
29 7/8"
(759)
26 1/4"
(666)
9.73
(0.90)
5.47
(0.51)
24 1/2"
(622)
14.21
(1.32)
WDH2852 ◊
5.86
(0.54)
29 7/8"
(759)
28 1/4"
(717)
10.48
(0.97)
5.88
(0.55)
20 1/2"
(520)
15.14
(1.41)
WDH2856 ◊
6.27
(0.58)
29 7/8"
(759)
30 1/4"
(768)
11.22
(1.04)
5.05
(0.47)
16 1/2"
(418)
16.08
(1.49)
WDH28510 ◊
6.69
(0.62)
29 7/8"
(759)
32 1/4"
(819)
11.97
(1.11)
6.71
(0.62)
12 1/2"
(317)
17.01
(1.58)
WDH2862 ◊
7.10
(0.66)
29 7/8"
(759)
34 1/4"
(870)
12.72
(1.18)
7.13
(0.66)
8 1/2"
(215)
17.95
(1.67)
WDH210210
3.15
(0.29)
31 7/8"
(809)
14 1/4"
(362)
5.62
(0.52)
3.18
(0.30)
48 1/2"
(1231)
9.12
(0.85)
WDH21032
3.59
(0.33)
31 7/8"
(809)
16 1/4"
(412)
6.42
(0.60)
3.62
(0.34)
44 1/2"
(1130)
10.11
(0.94)
WDH21036
4.04
(0.38)
31 7/8"
(809)
18 1/4"
(463)
7.23
(0.67)
4.06
(0.38)
40 1/2"
(1028)
11.10
(1.03)
WDH210310
4.48
(0.42)
31 7/8"
(809)
20 1/4"
(514)
8.03
(0.75)
4.51
(0.42)
36 1/2"
(926)
12.09
(1.12)
WDH21042
4.92
(0.46)
7
31 /8"
(809)
1
22 /4"
(565)
8.84
(0.82)
4.95
(0.46)
1
32 /2"
(825)
13.08
(1.22)
WDH21046
5.36
(0.50)
31 7/8"
(809)
24 1/4"
(616)
9.64
(0.90)
5.39
(0.50)
28 1/2"
(723)
14.07
(1.31)
For cottage and reverse cottage sash opening specifications visit andersenwindows.com/openingspecs.
400 Series ® Woodwright Double-Hung Full-Frame Windows
Clear Opening in Full Open Position Window Number
• "Top of Subfloor to Top of Inside Sill Stop" is calculated based upon a structural header height of 6'-10 1/2" (2096). • Dimensions in parentheses are in millimeters or square meters. ◊ Meet or exceed clear opening area of 5.7 sq. ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610).
continued on next page
69
WOODWRIGHT DOUBLE-HUNG FULL-FRAME WINDOWS ®
Woodwright® Double-Hung Window Opening and Area Specifications (continued) Clear Opening in Full Open Position Window Number
Clear Opening Area Sq. Ft./(m2)
Width Inches/(mm)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Glass Vent Sq. Ft./(m2)
Top of Subfloor to Top of Inside Sill Stop Inches/(mm)
Overall Window Area Sq. Ft./(m2)
WDH210410 ◊
5.81
(0.54)
31 7/8"
(809)
26 1/4"
(666)
10.45
(0.97)
5.83
(0.54)
24 1/2"
(622)
15.05
(1.40)
WDH21052 ◊
6.25
(0.58)
31 7/8"
(809)
28 1/4"
(717)
11.25
(1.05)
6.28
(0.58)
20 1/2"
(520)
16.04
(1.49)
WDH21056 ◊
6.70
(0.62)
31 7/8"
(809)
30 1/4"
(768)
12.06
(1.12)
5.39
(0.50)
16 1/2"
(418)
17.03
(1.59)
WDH210510 ◊
7.14
(0.66)
31 7/8"
(809)
34 1/4"
(819)
12.86
(1.20)
7.16
(0.67)
12 1/2"
(317)
18.02
(1.67)
WDH21062 ◊
7.58
(0.70)
31 7/8"
(809)
34 1/4"
(870)
13.67
(1.27)
7.60
(0.71)
8 1/2"
(215)
19.01
(1.77)
WDH30210
3.35
(0.31)
33 7/8"
(860)
14 1/4"
(362)
6.01
(0.56)
3.38
(0.31)
48 1/2"
(1231)
9.63
(0.90)
WDH3032
3.82
(0.36)
33 7/8"
(860)
16 1/4"
(412)
6.87
(0.64)
3.85
(0.36)
44 1/2"
(1130)
10.67
(0.99)
WDH3036
4.29
(0.40)
33 7/8"
(860)
18 1/4"
(463)
7.73
(0.72)
4.32
(0.40)
40 1/2"
(1028)
11.72
(1.09)
WDH30310
4.76
(0.44)
33 7/8"
(860)
20 1/4"
(514)
8.59
(0.80)
4.79
(0.45)
36 1/2"
(926)
12.76
(1.19)
WDH3042
5.23
(0.49)
33 7/8"
(860)
22 1/4"
(565)
9.45
(0.88)
5.26
(0.49)
32 1/2"
(825)
13.81
(1.28)
WDH3046 ◊
5.70
(0.53)
33 7/8"
(860)
24 1/4"
(616)
10.31
(0.96)
5.73
(0.53)
28 1/2"
(723)
14.85
(1.38)
WDH30410 ◊
6.17
(0.57)
33 7/8"
(860)
26 1/4"
(666)
11.17
(1.04)
6.20
(0.58)
24 1/2"
(622)
15.90
(1.48)
WDH3052 ◊
6.64
(0.62)
33 7/8"
(860)
28 1/4"
(717)
12.03
(1.12)
6.67
(0.62)
20 1/2"
(520)
16.95
(1.58)
WDH3056 ◊
7.12
(0.66)
33 7/8"
(860)
30 1/4"
(768)
12.89
(1.20)
5.73
(0.53)
16 1/2"
(418)
17.99
(1.67)
WDH30510 ◊
7.58
(0.70)
33 7/8"
(860)
32 1/4"
(819)
13.75
(1.28)
7.61
(0.71)
12 1/2"
(317)
19.04
(1.77)
WDH3062 ◊
8.05
(0.75)
33 7/8"
(860)
34 1/4"
(870)
14.61
(1.36)
8.08
(0.75)
8 1/2"
(215)
20.08
(1.87)
WDH34210
3.74
(0.35)
37 7/8"
(962)
14 1/4"
(362)
6.79
(0.63)
3.78
(0.35)
48 1/2"
(1231)
10.65
(0.99)
WDH3432
4.27
(0.40)
37 7/8"
(962)
16 1/4"
(412)
7.76
(0.72)
4.30
(0.40)
44 1/2"
(1130)
11.81
(1.10)
WDH3436
4.80
(0.45)
37 7/8"
(962)
18 1/4"
(463)
8.73
(0.81)
4.83
(0.45)
40 1/2"
(1028)
12.97
(1.21)
WDH34310
5.32
(0.49)
37 7/8"
(962)
20 1/4"
(514)
9.70
(0.90)
5.35
(0.50)
36 1/2"
(926)
14.12
(1.31)
WDH3442
5.85
(0.54)
37 7/8"
(962)
22 1/4"
(565)
10.67
(0.99)
5.88
(0.55)
32 1/2"
(825)
15.28
(1.42)
WDH3446 ◊
6.37
(0.59)
37 7/8"
(962)
24 1/4"
(616)
11.64
(1.08)
6.41
(0.60)
28 1/2"
(723)
16.43
(1.53)
WDH34410 ◊
6.90
(0.64)
37 7/8"
(962)
26 1/4"
(666)
12.61
(1.17)
6.93
(0.64)
24 1/2"
(622)
17.59
(1.63)
WDH3452 ◊
7.43
(0.69)
37 7/8"
(962)
28 1/4"
(717)
13.58
(1.26)
7.46
(0.69)
20 1/2"
(520)
18.75
(1.74)
WDH3456 ◊
7.96
(0.74)
37 7/8"
(962)
30 1/4"
(768)
14.55
(1.35)
6.41
(0.60)
16 1/2"
(418)
19.90
(1.85)
WDH34510 ◊
8.48
(0.79)
37 7/8"
(962)
32 1/4"
(819)
15.53
(1.44)
8.51
(0.79)
12 1/2"
(317)
21.06
(1.96)
WDH3462 ◊
9.01
(0.84)
37 7/8"
(962)
34 1/4"
(870)
16.50
(1.53)
9.04
(0.84)
8 1/2"
(215)
22.22
(2.06)
WDH38210
4.14
(0.39)
41 7/8"
(1064)
14 1/4"
(362)
7.56
(0.70)
4.17
(0.39)
48 1/2"
(1231)
11.68
(1.09)
WDH3832
4.72
(0.44)
41 7/8"
(1064)
16 1/4"
(412)
8.64
(0.80)
4.76
(0.44)
44 1/2"
(1130)
12.94
(1.20)
WDH3836
5.30
(0.49)
41 7/8"
(1064)
18 1/4"
(463)
9.72
(0.90)
5.34
(0.50)
40 1/2"
(1028)
14.21
(1.32)
WDH38310
5.88
(0.55)
41 7/8"
(1064)
20 1/4"
(514)
10.81
(1.00)
5.92
(0.55)
36 1/2"
(926)
15.48
(1.44)
WDH3842
6.47
(0.60)
41 7/8"
(1064)
22 1/4"
(565)
11.89
(1.11)
6.50
(0.60)
32 1/2"
(825)
16.75
(1.56)
WDH3846 ◊
7.05
(0.66)
41 7/8"
(1064)
24 1/4"
(616)
12.97
(1.21)
7.08
(0.66)
28 1/2"
(723)
18.01
(1.67)
WDH38410 ◊
7.63
(0.71)
41 7/8"
(1064)
26 1/4"
(666)
14.05
(1.31)
7.66
(0.71)
24 1/2"
(622)
19.28
(1.79)
WDH3852 ◊
8.21
(0.76)
41 7/8"
(1064)
28 1/4"
(717)
15.14
(1.41)
8.25
(0.77)
20 1/2"
(520)
20.55
(1.91)
WDH3856 ◊
8.80
(0.82)
41 7/8"
(1064)
30 1/4"
(768)
16.22
(1.51)
7.08
(0.66)
16 1/2"
(418)
21.62
(2.01)
WDH38510 ◊
9.37
(0.87)
41 7/8"
(1064)
32 1/4"
(819)
17.30
(1.61)
9.41
(0.87)
12 1/2"
(317)
23.08
(2.14)
WDH3862 ◊
9.96
(0.93)
41 7/8"
(1064)
34 1/4"
(870)
18.38
(1.71)
9.99
(0.93)
8 1/2"
(215)
24.35
(2.26)
For cottage and reverse cottage sash opening specifications visit andersenwindows.com/openingspecs.
Woodwright® Springline™ Single-Hung Window Opening and Area Specifications Clear Opening in Full Open Position Window Number
Clear Opening Area Sq. Ft./(m2)
Width Inches/(mm)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Area Sq. Ft./(m2)
Top of Subfloor to Top of Inside Sill Stop Inches/(mm)
Overall Window Area Sq. Ft./(m2)
WS2042
1.39
(0.13)
21 7/8"
(556)
9 2/16"
(231)
5.48
(0.51)
1.39
(0.13)
32 9/16"
(828)
8.90
(0.83)
WS2046
1.54
(0.14)
21 7/8"
(556)
10 2/16"
(257)
5.88
(0.55)
1.54
(0.14)
29 9/16"
(751)
9.44
(0.88)
WS20410
1.69
(0.16)
21 7/8"
(556)
11 2/16"
(282)
6.29
(0.59)
1.69
(0.16)
26 9/16"
(675)
9.97
(0.93)
WS2052
1.84
(0.17)
21 7/8"
(556)
12 2/16"
(308)
6.70
(0.62)
1.84
(0.17)
23 9/16"
(599)
10.51
(0.98)
WS2056
2.76
(0.26)
21 7/8"
(556)
18 2/16"
(461)
7.80
(0.72)
2.76
(0.26)
15 9/16"
(395)
11.94
(1.11)
WS20510
2.96
(0.28)
21 7/8"
(556)
19 1/2"
(495)
8.25
(0.77)
2.96
(0.28)
12 9/16"
(310)
12.53
(1.16)
WS2062
3.16
(0.29)
21 7/8"
(556)
20 13/16"
(529)
8.71
(0.81)
3.16
(0.29)
8 7/8"
(226)
13.12
(1.22)
WS2442
1.64
(0.15)
25 7/8"
(658)
9 2/16"
(231)
6.85
(0.64)
1.64
(0.15)
30 9/16"
(777)
10.62
(0.99)
WS2446
1.82
(0.17)
25 7/8"
(658)
10 2/16"
(257)
7.34
(0.68)
1.82
(0.17)
27 9/16"
(701)
11.23
(1.04)
WS24410
2.00
(0.19)
25 7/8"
(658)
11 2/16"
(282)
7.83
(0.73)
2.00
(0.19)
24 9/16"
(624)
11.85
(1.10)
WS2452
2.18
(0.20)
25 7/8"
(658)
12 2/16"
(308)
8.33
(0.77)
2.18
(0.20)
21 9/16"
(548)
12.47
(1.16)
WS2456
3.26
(0.30)
25 7/8"
(658)
18 2/16"
(461)
9.65
(0.90)
3.26
(0.30)
13 9/16"
(344)
14.12
(1.31)
WS24510
3.50
(0.33)
25 7/8"
(658)
19 1/2"
(495)
10.19
(0.95)
3.50
(0.33)
10 3/16"
(259)
14.81
(1.38)
WS2462
3.74
(0.35)
25 7/8"
(658)
20 13/16"
(529)
10.74
(1.00)
3.74
(0.35)
6 7/8"
(175)
15.49
(1.44)
WS2642
1.76
(0.16)
27 7/8"
(708)
9 1/8"
(231)
7.57
(0.70)
1.76
(0.16)
29 9/16"
(751)
11.51
(1.07)
WS2646
1.96
(0.18)
27 7/8"
(708)
10 1/8"
(257)
8.10
(0.75)
1.96
(0.18)
26 9/16"
(675)
12.17
(1.13)
WS26410
2.15
(0.20)
27 7/8"
(708)
11 1/8"
(282)
8.64
(0.80)
2.15
(0.20)
23 9/16"
(599)
12.82
(1.19)
WS2652
2.35
(0.22)
27 7/8"
(708)
12 1/8"
(308)
9.17
(0.85)
2.35
(0.22)
20 9/16"
(523)
13.48
(1.25)
WS2656
3.52
(0.33)
27 7/8"
(708)
18 1/8"
(461)
10.60
(0.99)
3.52
(0.33)
12 9/16"
(319)
15.25
(1.42)
70
continued on next page
• "Top of Subfloor to Top of Inside Sill Stop" is calculated based upon a structural header height of 6'-10 1/2" (2096). • Dimensions in parentheses are in millimeters or square meters. ◊ Meet or exceed clear opening area of 5.7 sq. ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610).
Clear Opening in Full Open Position Window Number WS26510
Clear Opening Area Sq. Ft./(m2) 3.77
(0.35)
Width Inches/(mm)
Height Inches/(mm)
27 7/8"
(708)
19 1/2"
Glass Area Sq. Ft./(m2)
(495)
11.19
(1.04)
(continued)
Vent Area Sq. Ft./(m2)
Top of Subfloor to Top of Inside Sill Stop Inches/(mm)
Overall Window Area Sq. Ft./(m2)
3.77
9 3/16"
(234)
15.98
(1.49)
(0.35)
Woodwright® Picture Window Area Specifications Window Number
Glass Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2)
WS2662
4.03
(0.38)
27 7/8"
(708)
20 13/16"
(529)
11.79
(1.10)
4.03
(0.38)
5 7/8"
(149)
16.71
(1.55)
WPW10310
2.03
(0.19)
4.07
(0.38)
WS2842
1.89
(0.18)
29 7/8"
(759)
9 1/8"
(231)
8.31
(0.77)
1.89
(0.18)
28 9/16"
(726)
12.42
(1.15)
WPW1042
2.22
(0.21)
4.41
(0.41)
WS2846
2.10
(0.20)
29 7/8"
(759)
10 1/8"
(257)
8.89
(0.83)
2.10
(0.20)
25 9/16"
(650)
13.12
(1.22)
WPW1046
2.42
(0.23)
4.74
(0.44)
WS28410
2.31
(0.21)
29 7/8"
(759)
11 1/8"
(282)
9.46
(0.88)
2.31
(0.21)
22 9/16"
(574)
13.82
(1.28)
WPW10410
2.61
(0.24)
5.07
(0.47)
WS2852
2.51
(0.23)
29 7/8"
(759)
12 1/8"
(308)
10.04
(0.93)
2.51
(0.23)
19 9/16"
(497)
14.52
(1.35)
WPW1052
2.81
(0.26)
5.41
(0.50)
WS2856
3.77
(0.35)
29 7/8"
(759)
18 1/8"
(461)
11.58
(1.08)
3.77
(0.35)
11 9/16"
(293)
16.40
(1.52)
WPW1056
3.01
(0.28)
5.74
(0.53)
WS28510
4.04
(0.38)
29 7/8"
(759)
19 1/2"
(495)
12.22
(1.14)
4.04
(0.38)
8 3/16"
(209)
17.18
(1.60)
WPW10510
3.20
(0.30)
6.07
(0.56)
WS2862
4.32
(0.40)
29 7/8"
(759)
20 13/16"
(529)
12.86
(1.20)
4.32
(0.40)
4 7/8"
(124)
17.95
(1.67)
WPW1062
3.40
(0.32)
6.41
(0.60)
WS21042
2.02
(0.19)
31 7/8"
(810)
9 1/8"
(231)
9.07
(0.84)
2.02
(0.19)
27 9/16"
(701)
13.35
(1.24)
WPW30310
9.38
(0.87)
12.77
(1.19)
WS21046
2.24
(0.21)
31 7/8"
(810)
10 1/8"
(257)
9.69
(0.90)
2.24
(0.21)
24 9/16"
(624)
14.09
(1.31)
WPW3042
10.29
(0.96)
13.82
(1.28)
WS210410
2.46
(0.23)
31 7/8"
(810)
11 1/8"
(282)
10.31
(0.96)
2.46
(0.23)
21 9/16"
(548)
14.84
(1.38)
WPW3046
11.19
(1.04)
14.86
(1.38)
WS21052
2.68
(0.25)
31 7/8"
(810)
12 1/8"
(308)
10.93
(1.02)
2.68
(0.25)
18 9/16"
(472)
15.58
(1.45)
WPW30410
12.10
(1.12)
15.91
(1.48) (1.58)
WS21056
4.02
(0.37)
31 7/8"
(810)
18 1/8"
(461)
12.58
(1.17)
4.02
(0.37)
10 9/16"
(268)
17.57
(1.63)
WPW3052
13.01
(1.21)
16.95
WS210510
4.32
(0.40)
31 7/8"
(810)
19 1/2"
(495)
13.27
(1.23)
4.32
(0.40)
7 3/16"
(183)
18.39
(1.71)
WPW3056
13.92
(1.29)
18.00
(1.67)
WS21062
4.61
(0.43)
31 7/8"
(810)
20 13/16"
(529)
13.95
(1.30)
4.61
(0.43)
3 7/8"
(99)
19.22
(1.79)
WPW30510
14.83
(1.38)
19.04
(1.77)
WS3042
2.14
(0.20)
33 7/8"
(861)
9 1/8"
(231)
9.86
(0.92)
2.14
(0.20)
26 9/16"
(675)
14.31
(1.33)
WPW3062
15.73
(1.46)
20.09
(1.87)
WS3046
2.38
(0.22)
33 7/8"
(861)
10 1/8"
(257)
10.52
(0.98)
2.38
(0.22)
23 9/16"
(599)
15.09
(1.40)
WPW34310
10.53
(0.98)
14.13
(1.31)
WS30410
2.62
(0.24)
33 7/8"
(861)
11 1/8"
(282)
11.18
(1.04)
2.62
(0.24)
20 9/16"
(523)
15.87
(1.48)
WPW3442
11.54
(1.07)
15.28
(1.42)
WS3052
2.85
(0.27)
33 7/8"
(861)
12 1/8"
(308)
11.84
(1.10)
2.85
(0.27)
17 9/16"
(447)
16.66
(1.55)
WPW3446
12.56
(1.17)
16.44
(1.53)
WS3056
4.27
(0.40)
33 7/8"
(861)
18 1/8"
(461)
13.60
(1.26)
4.27
(0.40)
9 9/16"
(242)
18.76
(1.74)
WPW34410
13.58
(1.26)
17.60
(1.64)
WS30510
4.59
(0.43)
33 7/8"
(861)
19 1/2"
(495)
14.33
(1.33)
4.59
(0.43)
6 3/16"
(158)
19.63
(1.82)
WPW3452
14.60
(1.36)
18.75
(1.74)
WS3062
4.90
(0.46)
33 7/8"
(861)
20 13/16"
(529)
15.07
(1.40)
4.90
(0.46)
2 7/8"
(73)
20.50
(1.90)
WPW3456
15.62
(1.45)
19.91
(1.85)
WS3442
2.40
(0.22)
37 7/8"
(962)
9 1/8"
(231)
11.50
(1.07)
2.40
(0.22)
24 9/16"
(624)
16.28
(1.51)
WPW34510
16.64
(1.55)
21.07
(1.96)
WS3446
2.66
(0.25)
37 7/8"
(962)
10 1/8"
(257)
12.24
(1.14)
2.66
(0.25)
21 9/16"
(548)
17.15
(1.59)
WPW3462
17.66
(1.64)
22.22
(2.06)
WS34410
2.92
(0.27)
37 7/8"
(962)
11 1/8"
(282)
12.98
(1.21)
2.92
(0.27)
18 9/16"
(472)
18.02
(1.67)
WPW310310
12.16
(1.13)
16.06
(1.49)
WS3452
3.19
(0.30)
37 7/8"
(962)
12 1/8"
(308)
13.72
(1.28)
3.19
(0.30)
15 9/16"
(396)
18.88
(1.75)
WPW31042
13.33
(1.24)
17.37
(1.61) (1.74)
WS3456
4.78
(0.44)
37 7/8"
(962)
18 1/8"
(461)
15.71
(1.46)
4.78
(0.44)
7 9/16"
(192)
21.21
(1.97)
WPW31046
14.51
(1.35)
18.69
WS34510
5.13
(0.48)
37 7/8"
(962)
19 1/2"
(495)
16.54
(1.54)
5.13
(0.48)
4 3/16"
(107)
22.17
(2.06)
WPW310410
15.69
(1.46)
20.00
(1.86)
WS3462
5.48
(0.51)
37 7/8"
(962)
20 13/16"
(529)
17.36
(1.61)
5.48
(0.51)
/8"
(22)
23.13
(2.15)
WPW31052
16.87
(1.57)
21.32
(1.98)
WS3842
2.65
(0.25)
41 7/8"
(1064)
9 1/8"
(231)
13.22
(1.23)
2.65
(0.25)
22 9/16"
(574)
18.34
(1.70)
WPW31056
18.04
(1.68)
22.63
(2.10)
WS3846
2.94
(0.27)
41 7/8"
(1064)
10 1/8"
(257)
14.04
(1.31)
2.94
(0.27)
19 9/16"
(497)
19.29
(1.79)
WPW310510
19.22
(1.79)
23.94
(2.22)
WS38410
3.23
(0.30)
41 7/8"
(1064)
11 1/8"
(282)
14.87
(1.38)
3.23
(0.30)
16 9/16"
(421)
20.24
(1.88)
WPW31062
20.40
(1.90)
25.26
(2.35)
WS3852
3.52
(0.33)
41 7/8"
(1064)
12 1/8"
(308)
15.69
(1.46)
3.52
(0.33)
13 9/16"
(345)
21.19
(1.97)
WPW42310
13.30
(1.24)
17.42
(1.62)
WS3856
5.28
(0.49)
41 7/8"
(1064)
18 1/8"
(461)
17.91
(1.66)
5.28
(0.49)
5 9/16"
(141)
23.74
(2.21)
WPW4242
14.20
(1.32)
18.84
(1.75)
WS38510
5.67
(0.53)
41 7/8"
(1064)
19 1/2"
(495)
18.82
(1.75)
5.67
(0.53)
2 3/16"
(56)
24.80
(2.30)
WPW4246
15.88
(1.48)
20.27
(1.88)
WS3862
6.06
(0.56)
41 7/8"
(1064) 20 13/16"
(529)
19.74
(1.83)
6.06
(0.56)
-1 1/8"
(-28)
25.85
(2.40)
WPW42410
17.17
(1.60)
21.69
(2.02)
WPW4252
18.46
(1.72)
23.12
(2.15)
WPW4256
19.75
(1.84)
24.54
(2.28)
WPW42510
21.03
(1.95)
25.97
(2.41)
7
Woodwright® Arch Double-Hung Window Opening and Area Specifications Clear Opening in Full Open Position Window Number
Clear Opening Area Sq. Ft./(m2)
Width Inches/(mm)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Area Sq. Ft./(m2)
Top of Subfloor to Top of Inside Sill Stop Inches/(mm)
Overall Window Area Sq. Ft./(m2)
WPW4262
22.32
(2.07)
27.39
(2.55)
WPW410310
15.60
(1.45)
20.13
(1.87)
WA18210
1.26
(0.12)
17 7/8"
(454)
10 3/16"
(259)
2.84
(0.26)
1.61
(0.15)
48 1/2"
(1232)
5.39
(0.50)
WPW41042
17.11
(1.59)
21.78
(2.02)
WA1832
1.51
(0.14)
17 7/8"
(454)
12 3/16"
(309)
3.27
(0.30)
1.85
(0.17)
44 1/2"
(1131)
5.99
(0.56)
WPW41046
18.62
(1.73)
23.43
(2.18)
WA1836
1.76
(0.16)
17 7/8"
(454)
14 3/16"
(360)
3.71
(0.34)
2.10
(0.20)
40 1/2"
(1029)
6.59
(0.61)
WPW410410
20.13
(1.87)
25.07
(2.33)
WA18310
2.01
(0.19)
17 7/8"
(454)
16 3/16"
(411)
4.14
(0.39)
2.35
(0.22)
36 1/2"
(928)
7.20
(0.67)
WPW41052
21.64
(2.01)
26.72
(2.48)
WA1842
2.26
(0.21)
17 7/8"
(454)
18 3/16"
(462)
4.58
(0.43)
2.60
(0.24)
32 1/2"
(826)
7.80
(0.72)
WPW41056
23.15
(2.15)
28.37
(2.64)
WA1846
2.51
(0.23)
17 7/8"
(454)
20 3/16"
(513)
5.01
(0.47)
2.85
(0.27)
28 1/2"
(724)
8.40
(0.78)
WPW410510
24.66
(2.29)
30.02
(2.79)
WA18410
2.76
(0.26)
17 7/8"
(454)
22 3/16"
(563)
5.44
(0.51)
3.10
(0.29)
24 1/2"
(623)
9.00
(0.84)
WPW41062
26.17
(2.43)
31.66
(2.94)
WA1852
3.00
(0.28)
17 7/8"
(454)
24 3/16"
(614)
5.88
(0.55)
3.35
(0.31)
20 1/2"
(521)
9.60
(0.89)
WPW56310
17.89
(1.66)
22.85
(2.12)
WA1856
3.25
(0.30)
17 7/8"
(454)
26 3/16"
(665)
6.31
(0.59)
3.59
(0.33)
16 1/2"
(420)
10.20
(0.95)
WPW5642
19.63
(1.82)
24.72
(2.30)
WA18510
3.50
(0.33)
17 7/8"
(454)
28 3/16"
(716)
6.75
(0.63)
3.84
(0.36)
12 1/2"
(318)
10.80
(1.00)
WPW5646
21.36
(1.98)
26.59
(2.47)
WA1862
3.75
(0.35)
17 7/8"
(454)
30 3/16"
(767)
7.18
(0.67)
4.09
(0.38)
8 1/2"
(216)
11.40
(1.06)
WPW56410
23.09
(2.15)
28.46
(2.64) (2.82)
WA2032
1.77
(0.16)
21 7/8"
(556)
11 5/8"
(296)
4.09
(0.38)
2.24
(0.21)
44 1/2"
(1131)
7.07
(0.66)
WPW5652
24.83
(2.31)
30.33
WA2036
2.07
(0.19)
21 7/8"
(556)
13 5/8"
(347)
4.63
(0.43)
2.55
(0.24)
40 1/2"
(1029)
7.78
(0.72)
WPW5656
26.56
(2.47)
32.20
(2.99)
WA20310
2.38
(0.22)
21 7/8"
(556)
15 5/8"
(397)
5.18
(0.48)
2.85
(0.27)
36 1/2"
(928)
8.50
(0.79)
WPW56510
28.29
(2.63)
34.07
(3.17)
WA2042
2.68
(0.25)
21 7/8"
(556)
17 5/8"
(448)
5.72
(0.53)
3.15
(0.29)
32 1/2"
(826)
9.21
(0.86)
WPW5662
30.02
(2.79)
35.93
(3.34)
WA2046
2.99
(0.28)
21 7/8"
(556)
19 5/8"
(499)
6.27
(0.58)
3.46
(0.32)
28 1/2"
(724)
9.92
(0.92)
WA20410
3.29
(0.31)
21 7/8"
(556)
21 5/8"
(550)
6.81
(0.63)
3.76
(0.35)
24 1/2"
(623)
10.63
(0.99)
WA2052
3.59
(0.33)
21 7/8"
(556)
23 5/8"
(601)
7.36
(0.68)
4.07
(0.38)
20 1/2"
(521)
11.34
(1.05)
WA2056
3.90
(0.36)
21 7/8"
(556)
25 5/8"
(651)
7.90
(0.73)
4.37
(0.41)
16 1/2"
(420)
12.05
(1.12)
WA20510
4.20
(0.39)
21 7/8"
(556)
27 5/8"
(702)
8.45
(0.79)
4.68
(0.43)
12 1/2"
(318)
12.77
(1.19)
continued on next page
• Dimensions in parentheses are in square meters.
• "Top of Subfloor to Top of Inside Sill Stop" is calculated based upon a structural header height of 6'-10 1/2" (2096). • Dimensions in parentheses are in millimeters or square meters.
71
400 Series ® Woodwright Double-Hung Full-Frame Windows
Woodwright® Springline™ Single-Hung Window Opening and Area Specifications
WOODWRIGHT DOUBLE-HUNG FULL-FRAME WINDOWS ®
Woodwright® Arch Double-Hung Window Opening and Area Specifications Clear Opening in Full Open Position Window Number
Clear Opening Area Sq. Ft./(m2)
Width Inches/(mm)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Area Sq. Ft./(m2)
(continued)
Top of Subfloor to Top of Inside Sill Stop Inches/(mm)
Overall Window Area Sq. Ft./(m2)
WA2062
4.51
(0.42)
21 7/8"
(556)
29 5/8"
(753)
8.99
(0.84)
4.98
(0.46)
8 1/2"
(216)
13.48
(1.25)
WA2432
2.00
(0.19)
25 7/8"
(658)
11 1/8"
(282)
4.89
(0.46)
2.62
(0.24)
44 1/2"
(1131)
8.14
(0.76)
WA2436
2.36
(0.22)
25 7/8"
(658)
13 1/8"
(333)
5.55
(0.52)
2.98
(0.28)
40 1/2"
(1029)
8.96
(0.83)
WA24310
2.72
(0.25)
25 7/8"
(658)
15 1/8"
(384)
6.21
(0.58)
3.34
(0.31)
36 1/2"
(928)
9.79
(0.91)
WA2442
3.08
(0.29)
25 7/8"
(658)
17 1/8"
(435)
6.86
(0.64)
3.70
(0.34)
32 1/2"
(826)
10.61
(0.99)
WA2446
3.44
(0.32)
25 7/8"
(658)
19 1/8"
(485)
7.52
(0.70)
4.06
(0.38)
28 1/2"
(724)
11.43
(1.06)
WA24410
3.80
(0.35)
25 7/8"
(658)
21 1/8"
(536)
8.17
(0.76)
4.42
(0.41)
24 1/2"
(623)
12.26
(1.14)
WA2452
4.16
(0.39)
25 7/8"
(658)
23 1/8"
(587)
8.83
(0.82)
4.78
(0.44)
20 1/2"
(521)
13.08
(1.22)
WA2456
4.51
(0.42)
25 7/8"
(658)
25 1/8"
(638)
9.49
(0.88)
5.14
(0.48)
16 1/2"
(420)
13.90
(1.29)
WA24510
4.87
(0.45)
25 7/8"
(658)
27 1/8"
(689)
10.14
(0.94)
5.50
(0.51)
12 1/2"
(318)
14.72
(1.37)
WA2462
5.23
(0.49)
25 7/8"
(658)
29 1/8"
(739)
10.80
(1.00)
5.86
(0.54)
8 1/2"
(216)
15.55
(1.44)
WA2632
2.10
(0.20)
27 7/8"
(708)
10 13/16"
(275)
5.29
(0.49)
2.81
(0.26)
44 1/2"
(1131)
8.67
(0.81)
WA2636
2.49
(0.23)
27 7/8"
(708)
12 13/16"
(326)
6.00
(0.56)
3.19
(0.30)
40 1/2"
(1029)
9.55
(0.89)
WA26310
2.88
(0.27)
27 7/8"
(708)
14 13/16"
(377)
6.72
(0.62)
3.58
(0.33)
36 1/2"
(928)
10.43
(0.97)
WA2642
3.26
(0.30)
27 7/8"
(708)
16 13/16"
(428)
7.43
(0.69)
3.97
(0.37)
32 1/2"
(826)
11.31
(1.05)
WA2646
3.65
(0.34)
27 7/8"
(708)
18 13/16"
(479)
8.14
(0.76)
4.36
(0.41)
28 1/2"
(724)
12.18
(1.13)
WA26410
4.04
(0.38)
27 7/8"
(708)
20 13/16"
(529)
8.85
(0.82)
4.74
(0.44)
24 1/2"
(623)
13.06
(1.21)
WA2652
4.42
(0.41)
27 7/8"
(708)
22 13/16"
(580)
9.56
(0.89)
5.13
(0.48)
20 1/2"
(521)
13.94
(1.30)
WA2656
4.81
(0.45)
27 7/8"
(708)
24 13/16"
(631)
10.28
(0.96)
5.52
(0.51)
16 1/2"
(420)
14.82
(1.38)
WA26510
5.20
(0.48)
27 7/8"
(708)
26 13/16"
(682)
10.99
(1.02)
5.91
(0.55)
12 1/2"
(318)
15.70
(1.46)
WA2662
5.59
(0.52)
27 7/8"
(708)
28 13/16"
(733)
11.70
(1.09)
6.29
(0.59)
8 1/2"
(216)
16.58
(1.54)
WA2836
2.61
(0.24)
29 7/8"
(759)
12 9/16"
(319)
6.46
(0.60)
3.41
(0.32)
40 1/2"
(1029)
10.13
(0.94)
WA28310
3.03
(0.28)
29 7/8"
(759)
14 9/16"
(370)
7.22
(0.67)
3.82
(0.36)
36 1/2"
(928)
11.07
(1.03)
WA2842
3.44
(0.32)
29 7/8"
(759)
16 9/16"
(421)
7.99
(0.74)
4.24
(0.39)
32 1/2"
(826)
12.00
(1.12)
WA2846
3.86
(0.36)
29 7/8"
(759)
18 9/16"
(472)
8.76
(0.81)
4.65
(0.43)
28 1/2"
(724)
12.94
(1.20)
WA28410
4.27
(0.40)
29 7/8"
(759)
20 9/16"
(523)
9.53
(0.89)
5.07
(0.47)
24 1/2"
(623)
13.87
(1.29)
WA2852
4.69
(0.44)
29 7/8"
(759)
22 9/16"
(573)
10.29
(0.96)
5.48
(0.51)
20 1/2"
(521)
14.80
(1.38)
WA2856
5.10
(0.47)
29 7/8"
(759)
24 9/16"
(624)
11.06
(1.03)
5.90
(0.55)
16 1/2"
(420)
15.74
(1.46)
WA28510
5.52
(0.51)
29 7/8"
(759)
26 9/16"
(675)
11.83
(1.10)
6.31
(0.59)
12 1/2"
(318)
16.67
(1.55)
WA2862 ◊
5.93
(0.55)
29 7/8"
(759)
28 9/16"
(726)
12.60
(1.17)
6.73
(0.63)
8 1/2"
(216)
17.61
(1.64)
WA210310
3.17
(0.29)
31 7/8"
(810)
14 5/16"
(363)
7.73
(0.72)
4.06
(0.38)
36 1/2"
(928)
11.70
(1.09)
WA21042
3.61
(0.34)
31 7/8"
(810)
16 5/16"
(414)
8.55
(0.80)
4.50
(0.42)
32 1/2"
(826)
12.69
(1.18)
WA21046
4.05
(0.38)
31 7/8"
(810)
18 5/16"
(465)
9.38
(0.87)
4.94
(0.46)
28 1/2"
(724)
13.68
(1.27)
WA210410
4.50
(0.42)
31 7/8"
(810)
20 5/16"
(516)
10.20
(0.95)
5.39
(0.50)
24 1/2"
(623)
14.67
(1.36)
WA21052
4.94
(0.46)
31 7/8"
(810)
22 5/16"
(567)
11.02
(1.02)
5.83
(0.54)
20 1/2"
(521)
15.66
(1.46)
WA21056
5.38
(0.50)
31 7/8"
(810)
24 5/16"
(617)
11.84
(1.10)
6.27
(0.58)
16 1/2"
(420)
16.65
(1.55)
WA210510 ◊
5.83
(0.54)
31 7/8"
(810)
26 5/16"
(668)
12.67
(1.18)
6.72
(0.62)
12 1/2"
(318)
17.64
(1.64)
WA21062 ◊
6.27
(0.58)
31 7/8"
(810)
28 5/16"
(719)
13.49
(1.25)
7.16
(0.67)
8 1/2"
(216)
18.63
(1.73)
WA30310
3.30
(0.31)
33 7/8"
(861)
14 1/16"
(357)
8.23
(0.77)
4.29
(0.40)
36 1/2"
(928)
12.34
(1.15)
WA3042
3.78
(0.35)
33 7/8"
(861)
16 1/16"
(407)
9.11
(0.85)
4.76
(0.44)
32 1/2"
(826)
13.38
(1.24)
WA3046
4.25
(0.39)
33 7/8"
(861)
18 1/16"
(458)
9.99
(0.93)
5.23
(0.49)
28 1/2"
(724)
14.43
(1.34)
WA30410
4.72
(0.44)
33 7/8"
(861)
20 1/16"
(509)
10.87
(1.01)
5.70
(0.53)
24 1/2"
(623)
15.47
(1.44)
WA3052
5.19
(0.48)
33 7/8"
(861)
22 1/16"
(560)
11.75
(1.09)
6.17
(0.57)
20 1/2"
(521)
16.52
(1.54)
WA3056
5.66
(0.53)
33 7/8"
(861)
24 1/16"
(611)
12.62
(1.17)
6.65
(0.62)
16 1/2"
(420)
17.56
(1.63)
WA30510 ◊
6.13
(0.57)
33 7/8"
(861)
26 1/16"
(661)
13.50
(1.25)
7.12
(0.66)
12 1/2"
(318)
18.61
(1.73)
WA3062 ◊
6.60
(0.61)
33 7/8"
(861)
28 1/16"
(712)
14.38
(1.34)
7.59
(0.71)
8 1/2"
(216)
19.65
(1.83)
WA34310
3.55
(0.33)
37 7/8"
(962)
13 1/2"
(343)
9.23
(0.86)
4.75
(0.44)
36 1/2"
(928)
13.60
(1.26)
WA3442
4.08
(0.38)
37 7/8"
(962)
15 1/2"
(394)
10.22
(0.95)
5.28
(0.49)
32 1/2"
(826)
14.76
(1.37)
WA3446
4.61
(0.43)
37 7/8"
(962)
17 1/2"
(445)
11.21
(1.04)
5.81
(0.54)
28 1/2"
(724)
15.91
(1.48)
WA34410
5.13
(0.48)
37 7/8"
(962)
19 1/2"
(495)
12.20
(1.13)
6.33
(0.59)
24 1/2"
(623)
17.07
(1.59)
WA3452
5.66
(0.53)
37 7/8"
(962)
21 1/2"
(546)
13.19
(1.23)
6.86
(0.64)
20 1/2"
(521)
18.22
(1.69)
WA3456
6.19
(0.58)
37 7/8"
(962)
23 1/2"
(597)
14.18
(1.32)
7.38
(0.69)
16 1/2"
(420)
19.38
(1.80)
WA34510 ◊
6.71
(0.62)
37 7/8"
(962)
25 1/2"
(648)
15.17
(1.41)
7.91
(0.74)
12 1/2"
(318)
20.54
(1.91)
WA3462 ◊
7.24
(0.67)
37 7/8"
(962)
27 1/2"
(699)
16.16
(1.50)
8.44
(0.78)
8 1/2"
(216)
21.69
(2.02)
WA3842
4.36
(0.41)
41 7/8"
(1064)
15"
(380)
11.32
(1.05)
5.79
(0.54)
32 1/2"
(826)
16.12
(1.50)
WA3846
4.94
(0.46)
41 7/8"
(1064)
17"
(431)
12.42
(1.15)
6.37
(0.59)
28 1/2"
(724)
17.39
(1.62)
WA38410
5.52
(0.51)
41 7/8"
(1064)
19"
(482)
13.52
(1.26)
6.95
(0.65)
24 1/2"
(623)
18.65
(1.73)
WA3852
6.10
(0.57)
41 7/8"
(1064)
21"
(533)
14.62
(1.36)
7.53
(0.70)
20 1/2"
(521)
19.92
(1.85)
WA3856
6.68
(0.62)
41 7/8"
(1064)
23"
(583)
15.72
(1.46)
8.11
(0.75)
16 1/2"
(420)
21.19
(1.97)
WA38510 ◊
7.26
(0.68)
7
41 /8"
(1064)
25"
(634)
16.82
(1.56)
8.70
WA3862 ◊
7.85
(0.73)
41 7/8"
(1064)
27"
(685)
17.93
(1.67)
9.28
72
(0.81)
1
12 /2"
(318)
22.46
(2.09)
(0.86)
8 1/2"
(216)
23.72
(2.20)
• "Top of Subfloor to Top of Inside Sill Stop" is calculated based upon a structural header height of 6'-10 1/2" (2096). • Dimensions in parentheses are in millimeters or square meters. ◊ Meet or exceed clear opening area of 5.7 sq. ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610).
Woodwright® Unequal Leg Arch Double-Hung Window Opening and Area Specifications Clear Opening Area Sq. Ft./(m2)
Width Inches/(mm)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Area Sq. Ft./(m2)
Top of Subfloor to Top of Inside Sill Stop Inches/(mm)
Overall Window Area Sq. Ft./(m2)
WU1836
1.44
(0.13)
17 7/8"
(454)
11 5/8"
(295)
3.59
(0.33)
1.98
(0.18)
40 1/2"
(1029)
6.47
(0.60)
WU18310
1.69
(0.16)
17 7/8"
(454)
13 5/8"
(346)
4.02
(0.37)
2.23
(0.21)
36 1/2"
(928)
7.07
(0.66)
WU1842
1.94
(0.18)
17 7/8"
(454)
15 5/8"
(396)
4.46
(0.41)
2.48
(0.23)
32 1/2"
(826)
7.67
(0.71)
WU1846
2.19
(0.20)
17 7/8"
(454)
17 5/8"
(447)
4.89
(0.45)
2.72
(0.25)
28 1/2"
(724)
8.27
(0.77)
WU18410
2.44
(0.23)
17 7/8"
(454)
19 5/8"
(498)
5.32
(0.49)
2.97
(0.28)
24 1/2"
(623)
8.87
(0.82)
WU1852
2.68
(0.25)
17 7/8"
(454)
21 5/8"
(549)
5.76
(0.53)
3.22
(0.30)
20 1/2"
(521)
9.47
(0.88)
WU1856
2.93
(0.27)
17 7/8"
(454)
23 5/8"
(600)
6.19
(0.58)
3.47
(0.32)
16 1/2"
(420)
10.07
(0.94)
WU18510
3.18
(0.30)
17 7/8"
(454)
25 5/8"
(650)
6.63
(0.62)
3.72
(0.35)
12 1/2"
(318)
10.67
(0.99)
WU1862
3.43
(0.32)
17 7/8"
(454)
27 5/8"
(701)
7.06
(0.66)
3.97
(0.37)
8 1/2"
(216)
11.28
(1.05)
WU20310
1.71
(0.16)
21 7/8"
(556)
11 1/4"
(286)
4.95
(0.46)
2.61
(0.24)
36 1/2"
(928)
8.24
(0.77)
WU2042
2.02
(0.19)
21 7/8"
(556)
13 1/4"
(337)
5.50
(0.51)
2.91
(0.27)
32 1/2"
(826)
8.96
(0.83)
WU2046
2.32
(0.22)
21 7/8"
(556)
15 1/4"
(388)
6.04
(0.56)
3.22
(0.30)
28 1/2"
(724)
9.67
(0.90)
WU20410
2.62
(0.24)
21 7/8"
(556)
17 1/4"
(438)
6.59
(0.61)
3.52
(0.33)
24 1/2"
(623)
10.38
(0.96)
WU2052
2.93
(0.27)
21 7/8"
(556)
19 1/4"
(489)
7.13
(0.66)
3.83
(0.36)
20 1/2"
(521)
11.09
(1.03)
WU2056
3.23
(0.30)
21 7/8"
(556)
21 1/4"
(540)
7.68
(0.71)
4.13
(0.38)
16 1/2"
(420)
11.80
(1.10)
WU20510
3.54
(0.33)
21 7/8"
(556)
23 1/4"
(591)
8.22
(0.76)
4.44
(0.41)
12 1/2"
(318)
12.51
(1.16)
WU2062
3.84
(0.36)
21 7/8"
(556)
25 1/4"
(642)
8.77
(0.81)
4.74
(0.44)
8 1/2"
(216)
13.23
(1.23)
WU2446
2.21
(0.21)
25 7/8"
(658)
12 1/4"
(312)
7.12
(0.66)
3.64
(0.34)
28 1/2"
(724)
10.99
(1.02)
WU24410
2.57
(0.24)
25 7/8"
(658)
14 1/4"
(363)
7.78
(0.72)
4.00
(0.37)
24 1/2"
(623)
11.81
(1.10)
WU2452
2.93
(0.27)
25 7/8"
(658)
16 1/4"
(413)
8.44
(0.78)
4.36
(0.41)
20 1/2"
(521)
12.63
(1.17)
WU2456E
3.29
(0.31)
25 7/8"
(658)
18 1/4"
(464)
9.09
(0.84)
4.72
(0.44)
16 1/2"
(420)
13.46
(1.25)
WU24510
3.65
(0.34)
25 7/8"
(658)
20 1/4"
(515)
9.75
(0.91)
5.08
(0.47)
12 1/2"
(318)
14.28
(1.33)
WU2462
4.01
(0.37)
25 7/8"
(658)
22 1/4"
(566)
10.40
(0.97)
5.44
(0.51)
8 1/2"
(216)
15.10
(1.40)
WU26410
2.42
(0.23)
27 7/8"
(708)
12 1/2"
(318)
8.34
(0.78)
4.21
(0.39)
24 1/2"
(623)
12.49
(1.16)
WU2652
2.81
(0.26)
27 7/8"
(708)
14 1/2"
(368)
9.06
(0.84)
4.59
(0.43)
20 1/2"
(521)
13.37
(1.24)
WU2656
3.20
(0.30)
27 7/8"
(708)
16 1/2"
(419)
9.77
(0.91)
4.98
(0.46)
16 1/2"
(420)
14.25
(1.32)
WU26510
3.58
(0.33)
27 7/8"
(708)
18 1/2"
(470)
10.48
(0.97)
5.37
(0.50)
12 1/2"
(318)
15.13
(1.41)
WU2662
3.97
(0.37)
27 7/8"
(708)
20 1/2"
(521)
11.19
(1.04)
5.76
(0.53)
8 1/2"
(216)
16.01
(1.49)
WU2852
2.59
(0.24)
29 7/8"
(759)
12 1/2"
(317)
9.65
(0.90)
4.80
(0.45)
20 1/2"
(521)
14.08
(1.31)
WU2856
3.01
(0.28)
29 7/8"
(759)
14 1/2"
(368)
10.42
(0.97)
5.22
(0.48)
16 1/2"
(420)
15.01
(1.40)
WU28510
3.42
(0.32)
29 7/8"
(759)
16 1/2"
(419)
11.19
(1.04)
5.63
(0.52)
12 1/2"
(318)
15.95
(1.48)
WU2862
3.84
(0.36)
29 7/8"
(759)
18 1/2"
(470)
11.95
(1.11)
6.05
(0.56)
8 1/2"
(216)
16.88
(1.57)
WU21042
3.13
(0.29)
31 7/8"
(810)
14 1/8"
(359)
8.35
(0.78)
4.31
(0.40)
32 1/2"
(826)
12.52
(1.16)
WU21046
3.57
(0.33)
31 7/8"
(810)
16 1/8"
(409)
9.17
(0.85)
4.75
(0.44)
28 1/2"
(724)
13.51
(1.26)
WU210410
4.01
(0.37)
31 7/8"
(810)
18 1/8"
(460)
10.00
(0.93)
5.19
(0.48)
24 1/2"
(623)
14.50
(1.35)
WU21052
4.46
(0.41)
31 7/8"
(810)
20 1/8"
(511)
10.82
(1.01)
5.64
(0.52)
20 1/2"
(521)
15.49
(1.44)
WU21056
4.90
(0.46)
31 7/8"
(810)
22 1/8"
(562)
11.64
(1.08)
6.08
(0.56)
16 1/2"
(420)
16.48
(1.53)
WU210510
5.34
(0.50)
31 7/8"
(810)
24 1/8"
(613)
12.46
(1.16)
6.52
(0.61)
12 1/2"
(318)
17.47
(1.62)
WU21062 ◊
5.78
(0.54)
31 7/8"
(810)
26 1/8"
(663)
13.29
(1.23)
6.96
(0.65)
8 1/2"
(216)
18.46
(1.72)
WU3042
3.13
(0.29)
33 7/8"
(861)
13 5/16"
(338)
8.86
(0.82)
4.51
(0.42)
32 1/2"
(826)
13.15
(1.22)
WU3046
3.60
(0.34)
33 7/8"
(861)
15 5/16"
(389)
9.73
(0.90)
4.98
(0.46)
28 1/2"
(724)
14.20
(1.32)
WU30410
4.07
(0.38)
33 7/8"
(861)
17 5/16"
(440)
10.61
(0.99)
5.46
(0.51)
24 1/2"
(623)
15.24
(1.42)
WU3052
4.54
(0.42)
33 7/8"
(861)
19 5/16"
(490)
11.49
(1.07)
5.93
(0.55)
20 1/2"
(521)
16.29
(1.51)
WU3056
5.02
(0.47)
33 7/8"
(861)
21 5/16"
(541)
12.37
(1.15)
6.40
(0.59)
16 1/2"
(420)
17.33
(1.61)
WU30510
5.49
(0.51)
33 7/8"
(861)
23 5/16"
(592)
13.25
(1.23)
6.87
(0.64)
12 1/2"
(318)
18.38
(1.71)
WU3062 ◊
5.96
(0.55)
33 7/8"
(861)
25 5/16"
(643)
14.13
(1.31)
7.34
(0.68)
8 1/2"
(216)
19.42
(1.80)
WU34410
4.09
(0.38)
37 7/8"
(962)
15 1/2"
(395)
11.81
(1.10)
5.95
(0.55)
24 1/2"
(623)
16.69
(1.55)
WU3452
4.61
(0.43)
37 7/8"
(962)
17 1/2"
(445)
12.80
(1.19)
6.47
(0.60)
20 1/2"
(521)
17.85
(1.66)
WU3456
5.14
(0.48)
37 7/8"
(962)
19 1/2"
(496)
13.79
(1.28)
7.00
(0.65)
16 1/2"
(420)
19.01
(1.77)
WU34510
5.67
(0.53)
37 7/8"
(962)
21 1/2"
(547)
14.78
(1.37)
7.53
(0.70)
12 1/2"
(318)
20.16
(1.87)
WU3462
6.19
(0.58)
37 7/8"
(962)
23 1/2"
(598)
15.77
(1.47)
8.05
(0.75)
8 1/2"
(216)
21.32
(1.98)
WU3852
4.52
(0.42)
41 7/8"
(1064)
15 1/2"
(394)
14.06
(1.31)
6.97
(0.65)
20 1/2"
(521)
19.36
(1.80)
WU3856
5.10
(0.47)
41 7/8"
(1064)
17 1/2"
(445)
15.16
(1.41)
7.55
(0.70)
16 1/2"
(420)
20.63
(1.92)
WU38510
5.68
(0.53)
41 7/8"
(1064)
19 1/2"
(496)
16.27
(1.51)
8.13
(0.76)
12 1/2"
(318)
21.90
(2.03)
WU3862
6.26
(0.58)
41 7/8"
(1064)
21 1/2"
(547)
17.37
(1.61)
8.71
(0.81)
8 1/2"
(216)
23.16
(2.15)
400 Series ® Woodwright Double-Hung Full-Frame Windows
Clear Opening in Full Open Position Window Number
• "Top of Subfloor to Top of Inside Sill Stop" is calculated based upon a structural header height of 6'-10 /2" (2096). • Dimensions in parentheses are in millimeters or square meters. ◊ Meet or exceed clear opening area of 5.7 sq. ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610). 1
73
WOODWRIGHT DOUBLE-HUNG FULL-FRAME WINDOWS ®
Grille Patterns Prairie A
6-Light Prairie
Colonial
Renaissance
Prairie A
6-Light Prairie
Colonial
Renaissance
1 5 ⁄ 16" (33) Woodwright® Double-Hung
4 1 ⁄ 2" (114)
Equal Sash
Cottage Sash
Equal Sash
Cottage Sash
Woodwright® Arch Double-Hung
Woodwright® Springline™ Single-Hung
Modified Colonial
Colonial
Modified Colonial SCR
Tall Tall Fractional Fractional SCR
(Simulated Check Rail)
Short Short Fractional Fractional SCR
(Simulated Check Rail)
Check Rail
Double- and single-hung window
Victorian
patterns are also available in 3 3 ⁄ 8" (86)
Prairie A
Head
Clear Opg. Height *
Cottage Sash
Unit Dimension Height
Equal Sash
Minimum Rough Opening Height
Woodwright® Unequal Leg Arch Double-Hung
(Simulated Check Rail)
Upper Sash Only (USO)
Woodwright® Picture
configurations. For picture window patterns that require alignmentSill with double- or single-hung Vertical
Woodwright® Transom
1 5 ⁄ 16" (33)
(equal, cottage or reverse cottage)
4 1 ⁄ 2" (114)
1 5 ⁄ 16" (33)
4 1 ⁄ 2" (114)
when ordering. Number of lights and overall pattern varies with
Unobstr. Glass Height
available in all configurations.
page 11 or visit andersenwindows.com/grilles. Low-E4® Insulating Glass Head
Pine Stool 1 5 ⁄ 8" (41) 5 ⁄ 8"
1 ⁄ 2"
Custom Pattern Examples
Woodwright® Transom Window Details Sill 1 ⁄ Scale 1 2" (38) = 1'-0" (305) — 1:8
1 ⁄ 4"
(6)
Unobstructed Glass Width Unit Dimension Width Minimum Rough Opening Width
3" (76)
Unit Dimension Height
1 5 ⁄ 16" (33)
Minimum Rough Opening Height
Jamb
4 1 ⁄ 2" (114)
3" (76)
1 5 ⁄ 16" (33)
(13)
Sill
Low-E4® Insulating Glass
Jamb
(16)
2 3 ⁄ 8" (60)
4 1 ⁄ 2" (114)
2 9 ⁄ 16" (65) Unobstructed Glass Height
2 9 ⁄ 16" (65)
2 9 ⁄ 16 " (65) available. For more information on divided light see
(132)
Specified Equal Light Examples Custom Pattern Examples Head Low-E4® Insulating Glass
window size. Patterns are not
Unit Dimension Height
(65)
Specified equal light and custom patterns are also
5 3 ⁄ 16"
2 9 ⁄ 16"
Minimum Rough Opening Height
Specified Equal Light Examples
Head
Low-E4® Insulating Glass
2 9 ⁄ 16" (65)
1 ⁄ 4"
(6)
Sill
Horizontal Section
Vertical Section
• Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. Jamb • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
74
4 1 ⁄ 2" (114)
Unobstructed Glass Height
Section
patterns, identify the sash style
Low-E4® Insulating Gla
Woodwright® Double-Hung Window Details Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
4 1 ⁄ 2" (114)
1 5 ⁄ 16" (33)
1 5 ⁄ 16" (33) (44)
Unobstructed Glass Height
Unit Dimension Height
" (13)
1 ⁄ 4"
Sill Stop to Subfloor Dimension
(60)
Clear Opening Width
1 7 ⁄ 8" (47)
2 9 ⁄ 16" (6) (65)
1 7 ⁄ 8" (47)
Unit Dimension Width
Minimum Rough Opening Width
Horizontal Section Horizontal Section Low-E4® Insulating Glass
Head
2 9 ⁄ 16" (65)
4 1 ⁄ 2" (114)
1 ⁄ 4"
1 ⁄ 2"
1 5 ⁄ 8" (41) 5 ⁄ 8"
(6)
1 5 ⁄ 16" (33)
Unobstr. Glass Height
Pine Stool 1 5 ⁄ 8" (41) 5 ⁄ 8"
5 3 ⁄ 16" (132)
Unit Dimension Height
Low-E4® Insulating Glass Head
(16)
2 3 ⁄ 8" (60)
1 ⁄ 4"
Minimum Rough Opening Width
(13)
(6)
Sill
2 9 ⁄ 16" (65)
Vertical Section Low-E4® Insulating Glass
Jamb
Jamb
Low-E4® Insulating Glass Head
Pine Stool
4 1 ⁄ 2" (114)
Unobstr. Glass Height
4 1 ⁄ 2" (114)
1 ⁄ 2"
Horizontal Section
1 5 ⁄ 8" (41) 5 ⁄ 8"
(132)
(16)
2 3 ⁄ 8" (60) 1 ⁄ 2"
Sill
Jamb
(13)
2 9 ⁄ 16" (65)
Sill
5 3 ⁄ 16"
Unit Dimension Height
4 1 ⁄ 2" (114)
3" (76)
Unit Dimension Width
1 ⁄ 4"
1 5 ⁄ 16" (33)
Jamb
Low-E4® Insulating Glass
2 9 ⁄ 16" Unobstructed Glass (65)Width
3" (76)
1 5 ⁄ 16" (33)
(16)
2 3 ⁄ 8" (60)
Minimum Rough Opening Height
Unobstructed Glass Height
Unit Dimension Height
Minimum Rough Height 4 1 ⁄ Opening 2" (114)
Head
(13)
(13)
3" (76)
1 5 ⁄ 16" (33) 1 ⁄ 4"
(6)
(6)
Vertical Section
Sill
Low-E4® Insulating Glass 2 9 ⁄ 16" (65)
Jamb
1 ⁄ 2"
1 ⁄ 4"
Sill Stop to Subfloor Dimension
Low-E4® Insulating Glass Sill Pine StoolVertical Section
Head
1 ⁄ 2"
4 ⁄ 2" (114)
1 5 ⁄ 16" (33)
(13)
2 3 ⁄ 8" (60)
Woodwright® Picture Window Details 1 ⁄ 2" (38) = 1'-0" (305) — 1:8 Scale 1Sill 1
1 5 ⁄ 16" (33)
1 3 ⁄ 4" (44)
2 9 ⁄ 16" (65)
(6)
41 ⁄ 2" (114)
Check Rail
3 3 ⁄ 8" (86)
1 5 ⁄ 16" (33)
(13)
8"
1 5 ⁄ 16" (33)
Unit Dimension Height
4"
41 ⁄ 2" (114) (114)
Unobstr. Glass Height
4 1 ⁄ 2"
2 1 ⁄ 4" (57)
5 3 ⁄ 16" (132)
(57)
Minimum Rough Opening Height
4"
Jamb
400 Series ® Woodwright Double-Hung Full-Frame Windows
Lower Sash
Jamb
Jamb
Head
Unit Dimension Height
" (67)
Clear Opg. Height *
Minimum Rough Opening Height
2 5 ⁄ 8" (67)
Unobstructed Glass Width Unit Dimension Width Minimum Rough Opening Width
3" (76) 1 ⁄ 4"
(6)
• Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters. *Clear opening height dimension is less on arch, unequal leg arch and Springline™ windows.
75
1 (
WOODWRIGHT DOUBLE-HUNG FULL-FRAME WINDOWS ®
Horizontal (stack) Joining Detail
Vertical (ribbon) Joining Detail
Overall Window Dimension Height
Overall Window Dimension Width
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 Sum of individual window heights plus
1 ⁄ 16 "
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 Sum of individual window widths plus 1 ⁄ 16" (1.5) for each join.
(1.5) for each join.
Overall Rough Opening Height
Overall Rough Opening Width
Overall window dimension height.*
Overall window dimension width plus 1 ⁄ 2" (13).
ical Support by Others
Ver
Sill
Jamb
Unit Dim. Height
amb
1 ⁄ 16" (1.5)
Unit Dim. Height
m. Width
2 5 ⁄ 8" (67)
Unit Dim. Width Unit Dim. Width 1 ⁄ 16"
Head Vertical Section Woodwright® Transom (WTR) over Woodwright Double-Hung
(1.5)
Horizontal Section Woodwright® Double-Hung to Woodwright Double-Hung
For more joining information see the combination designs section starting on page 255.
Separate Rough Openings Detail Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
To meet structural requirements or to achieve a wider joined appearance, windows may be installed into separate rough openings having vertical support (by others) in combination with Andersen® exterior filler and exterior vinyl trim. Vertical Support by Others Sill
Jamb Unit Dim. Height
Jamb Andersen® Filler and Vinyl Trim
2 9 ⁄ 16" (65)
1 ⁄ 16"
Unit Dim. Width
1 ⁄ 16" (1.5)
Unit Dim. Height
(1.5)
Unit Dim. Width
2 5 ⁄ 8" (67)
2" (51) Horizontal Section Woodwright® Double-Hung and Woodwright Double-Hung
Head
• Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. • Dimensions in parentheses are in millimeters. *For stacks where bottom unit in combination is a double-hung or picture window with a sloped sill. If bottom window has a straight sill add 1/2" (13) to the overall window dimension height.
76
Jamb
J
Andersen® Filler and Vinyl Trim
2 9 ⁄ 16" (65)
1 ⁄ 16"
(1.5)
Jamb
Unit Dim. Width
Unit Dim 2" (51)
in ⁄ " (3) increments 18
WOODWRIGHT DOUBLE-HUNG INSERT WINDOWS
400 Series ® Woodwright Double-Hung Insert Windows
CUSTOM SIZING
®
SECTION REFERENCE Sizes ............................................ 80 Specifications .............................. 80 Existing Window Measurements ... 81 Sill Angle Details .......................... 81 Grille Patterns .............................. 82 Window Details ............................ 82 Joining Detail ............................... 82 Performance Data ...................... 269 Warranty .............................290-291 Dimensions in parentheses are in millimeters.
WOODWRIGHT DOUBLE-HUNG INSERT WINDOWS ®
H F
FEATURES
M
Frame A Fibrex® material exterior protects the
B For exceptionally long-lasting performance, sill members are constructed with a wood core and a Fibrex® material exterior.
K
L
frame – beautifully. Best of all, it's lowmaintenance and never needs painting*.
J
*
D Multiple weatherstripping systems help provide a barrier against wind, rain and dust. The combination of spring tension vinyl, rigid vinyl and flexible bulb weatherstripping is efficient and effective.
E Exterior stop covers are specially designed to allow easy application of high-quality sealant. 3 1/4" (83) “pocket window” jamb depth allows convenient replacement without disturbing interior window trim for most double-hung replacement situations.
F For units with White exterior color, exterior jamb liner is White. For all other units, the exterior jamb liner is gray.
Sash G Slide wash assists make it easy to tilt the sash into wash mode.
H Balancers in the sash enable contractors to screw through the jamb during installation without interfering with the window's operation. Wood Jamb Liner
White
Canvas
Sandtone
Forest Green
Dark Bronze
Black
Terratone
Pine
White
Maple
Oak
E C
D
B
C Natural wood stops are available in pine, oak, maple and prefinished White. Wood jamb liners add beauty and authenticity to the window interior.
INTERIOR
EXTERIOR A
Naturally occurring variations in grain, color and texture of wood make each window one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
J Low-maintenance sash exterior provides long-lasting* protection and performance. Sash exteriors on most units include Fibrex® material.
HARDWARE FINISHES
K Sash joints simulate the look of traditional mortise-and-tenon construction inside and out.
Antique Brass
Bright Brass
Brushed Chrome
Distressed Distressed Bronze Nickel
Satin Nickel
Stone
Glass L Silicone bed glazing provides superior weathertightness and durability.
M High-performance glass
Oil Rubbed Polished Bronze Chrome
options include:
Distressed bronze and oil rubbed bronze are "living" finishes that will change with time and use.
• Low-E4® glass® • Low-E4® HeatLock™ glass • Low-E4® Sun glass • Low-E4® SmartSun™ glass • Low-E4® SmartSun™ HeatLock™ glass
White
DOUBLE-HUNG HARDWARE STANDARD
ESTATE™
Lock & Keeper
Lock & Keeper
Stone | White
Antique Brass | Bright Brass Brushed Chrome | Distressed Bronze Distressed Nickel | Oil Rubbed Bronze Polished Chrome | Satin Nickel
Tempered glass and other glass options are available. Contact your Andersen supplier. A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite. Patterned Glass Patterned glass options are available. See page 10 for more details.
G
The cam-operated lock & keeper is designed for easy operation and long life* and comes standard. Stone is standard with natural interior units. White finish comes with prefinished White interiors.
Optional Estate lock & keeper reduces the clear opening height by 9⁄16" (14). Check with local building code officials to determine compliance with egress requirements.
OPTIONAL DOUBLE-HUNG LIFT HARDWARE
**
K
Hand Lift
ESTATE™
Finger Lifts
I
I Natural wood sash interior with
Antique Brass | Bright Brass | Brushed Chrome | Distressed Bronze Distressed Nickel | Oil Rubbed Bronze | Polished Chrome | Satin Nickel
classic chamfer detailing. Available in pine, oak, maple or prefinished White.
TRADITIONAL Hand Lift
Finger Lifts
Bar Lift
Antique Brass | Bright Brass | Brushed Chrome | Oil Rubbed Bronze Polished Chrome | Satin Nickel | Stone | White
* Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 400 Series Limited Warranty.
CLASSIC SERIES™ Hand Lift
Finger Lifts
** Hardware sold separately. Dimensions in parentheses are in millimeters. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
Stone | White Bold name denotes finish shown.
78
Sash Lift
ACCESSORIES Sold Separately
An exterior stop cover provides a clean transition from new window to the existing window casing.
Included Installation Materials
Insect Screens
Wood Interior Stop
Insect Screen Frames
Optional interior stop with matching chamfer is available.
Choose full insect screen or half insect screen. Half insect screen (shown above) allows ventilation without affecting the view through the upper sash. Frames are available in colors to match product exteriors.
Flat, self-hanging shims, backer rod, installation screws and complete instructions are included with each insert window. Measurement guide and worksheet at andersenwindows.com/measure.
Sash Options*
Sill Angles
Sash
Three sill angles are available — 0,° 8° and 14° — to closely match the existing sill in window replacement applications. See page 81 for more details.
Window Opening Control Device Kit
TruScene ® Insect Screen
Cottage Style
0° Sill Angle
Frame
Reverse Cottage Style
A Window Opening Control Device Kit is available, which limits sash travel to less than 4" (102) when the window is first opened. Available in Stone and White. Device shown on a 400 Series Tilt-Wash double-hung.
Exclusive Andersen® TruScene® insect screens provide over 50% more clarity than our conventional insect screens for a beautiful unobstructed view. They allow more fresh air and sunlight in, while doing a better job of keeping out small insects. Conventional Insect Screen Conventional insect screens have charcoal powder-coated aluminum screen mesh.
Installation
Grilles
Coil Stock
Grilles are available in a variety of configurations and widths. For double-hung grille patterns see page 82.
8° Sill Angle
14° Sill Angle
Andersen® aluminum coil stock can be ordered to match any of our 11 trim colors. Made from .019-gauge aluminum, Andersen coil stock is available in 24" (610) x 50' (15,240) rolls. Colormatched stainless steel trim nails 1 1/4" (32) long are also available and can be ordered in 1 lb. or 454 gram boxes.
CAUTION: • Painting and staining may cause damage to rigid vinyl. • 400 Series windows in Terratone color may be painted any color lighter than Terratone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Terratone any color darker than Terratone. • Do not paint 400 Series windows with White, Canvas, Sandtone, Forest Green, Dark Bronze or Black exterior colors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
For more information about glass, patterned glass, grilles and ® TruScene insect screen see pages 10-16. For more information about product performance, installation accessories and warranty see pages 269-291 or visit
andersenwindows.com
* Shown on 400 Series Tilt-Wash double-hung full-frame windows. Dimensions in parentheses are in millimeters.
79
400 Series ® Woodwright Double-Hung Insert Windows
Exterior Stop Cover
Woodwright® Double-Hung Insert Window Sizes
(1702)
for double-hung and picture insert
78"
(1981)
(1981)
(1981)
to to 11 1 ⁄ 2" (292) 1 ⁄ 2" 11
to
to 11 1 ⁄ 2"
11 1 ⁄ 2" (292) (292)
CUSTOM HEIGHTS CUSTOM HEIGHTS
(1956)
78" (1981) 78"
78"
CUSTOM HEIGHTS
(1969)
windows depend on new insert 1 ⁄ 2" 11 78" 78" 11 1 ⁄ 2" to to (292) 1 ⁄ 2" (1981) (1981) 11 1 ⁄ 2" (292) 78" 11 78" to to (292) (1981) (1981) (292) CUSTOM WIDTHS CUSTOM WIDTHS CUSTOM WIDTHS CUSTOM WIDTHS
to to to to to to to to to toto 11 1 ⁄ 2" 12 1 ⁄ 2"11 1 12" ⁄ 2" 12 1 ⁄ 2" 12" (318) (305) (292) 1 ⁄ 2" 1 ⁄ 21"⁄ 2" (292) 12" 11 12" (305) 1112 2 1 ⁄ 2" (318) (318) (305) (292) 18) (305) (292) 0° 14° 8° Sill Angle 14° Sill Angle 0° 8° 0° Sill Angle 8° 14° Sill Angle 0° 8° 14°
to
(1715)
to to to to to to to toto Available in 1 ⁄ 8" (3) increments 1 ⁄43"⁄4" 3031 3 ⁄41" ⁄4" 30 3 ⁄4" 3131 (806) (794) (781) (794) (781) 3 1 3 3 31 ⁄4⁄4"" 31 ⁄4" 30 ⁄4" 30 between minimum and maximum (806) (794) (781) (781) Reverse Cottage Sill Angle Cottage 0° 14° 8° Sill Angle 14° Cottage Reverse Cottage 8° widths and heights. Height limits Cottage Reverse Cottage Reverse Cottage 0° Sill Angle 8° Cottage 14° Sill Angle 14°
Transom
1 ⁄ 2" 11 78" 78" 11 1 ⁄ 2" to to 1 (292) (1918) (1918) ⁄ 2" 11 1 ⁄ 2" (292) 78" 11 78" to to (292) (1918) (1918)(292) CUSTOM WIDTHS CUSTOM WIDTHS 14° CUSTOM WIDTHS CUSTOM WIDTHS 0° 8°0° 14°8° 0° 8° 14° 8° 14° 77 1 ⁄ 2" 77" ⁄ 2" 77" 78" 77 178" (1981) (1969) (1981) 1 ⁄ 2" (1956) 78" (1956) 77 77" 77 1 ⁄ 2" (1969) 77"
(1981) (1956)
(1727) (1702)
CUSTOM HEIGHTS CUSTOM HEIGHTS
to to 31 3 ⁄4" 31 3 ⁄4" (806) 31 1 ⁄4" (806) (794) 0° 0° 8°
Picture
(1969)
(1715)
to
CUSTOM HEIGHTS
(1727)
CUSTOM HEIGHTS
(1956)
CUSTOM HEIGHTS CUSTOM HEIGHTS
981)
(1969)
to to to to to to to toto 1 ⁄43"⁄4" 2627 3 ⁄41" ⁄4" 26 3 ⁄4" 2727 (705) (692) (692) 1 ⁄4" (679) 33⁄4⁄4"" (679) 27 26 3 ⁄4" 27 26 (705) (692) (679) (679) 0° 14° 8° Sill Angle 14° Sill Angle 8° 0° Sill Angle 8° 14° Sill Angle 14°
CUSTOM HEIGHTS
78"
(1981) (1956)
68"
16451 ⁄ 25"⁄ 8" 45 5 ⁄ 8" 16 1 ⁄ 2" to to (419) 1 ⁄ 2" 5 ⁄ 8" (1159) (1159) 16 1 ⁄ 2" (419)45 5 ⁄ 8"16 45 to to (1159) (1159) (419) (419) 14° 0° 8°0° 14°8° CUSTOM WIDTHS CUSTOM WIDTHS 0° 8° 14° 8° 14° CUSTOM WIDTHS CUSTOM WIDTHS 67 1 ⁄ 2" 67" ⁄ 2" 67" 68" 67 168" (1727) (1715) (1727) 1 ⁄ 2" (1702) 67" 68" (1702) 67 67" 67 1 ⁄ 2" (1715)
CUSTOM HEIGHTS
to to 27 3 ⁄4" 27 1 ⁄4" 7 3 ⁄4" (705) 05) (692) 0° 0° 8°
0°
CUSTOM HEIGHTS CUSTOM HEIGHTS
(1969)
CUSTOM HEIGHTS
1 ⁄ 25" ⁄ 8" 1645 45 5 ⁄ 8" 16 1 ⁄ 2" to (1159) to (419) 1 ⁄ 2" 16 1 ⁄ 2" (419)45 5 ⁄ 816 45 5 ⁄ 8" " (1159) to to (419) (1159) (1159)(419) CUSTOM WIDTHS CUSTOM WIDTHS 14° 0° 8°0° 14°8° CUSTOM WIDTHS CUSTOM WIDTHS 0° 8° 14° 8° 14° 77 1 ⁄ 2" 77" ⁄ 2" 77" 78" 77 178" (1981) (1969) (1956) (1981) 78" (1956) 77 1 ⁄ 2" 77" 77" 77 1 ⁄ 2" (1969)
to
0°
Double-Hung - 2:3 Cottage & 3:2 Reverse Cottage Sash
Double-Hung - Equal Sash
CUSTOM HEIGHTS
981)
®
CUSTOM HEIGHTS
0°
78"
WOODWRIGHT DOUBLE-HUNG INSERT WINDOWS
(292)
must be 68" (1727) or less and height plus width cannot be less than 28" (711). Measurement guide for custom
= window width − 3.4375" (87)
Height
= Depends on sash ratio and specific sill angle of insert window, see below.
Grille patterns shown on page 82.
clear opening height
sill angle deduction
14°
8°
= (window height ÷ 2) − sill angle deduction
3.1875" (81)
3.4375" (87)
3.75" (95)
2:3 Cottage
= (window height x 2) ÷ 5 − sill angle deduction
2.875" (73)
3.0625" (78)
3.25" (83)
3:2 Reverse Cottage
= (window height x 2) ÷ 5 − sill angle deduction
2.375" (60)
2.5625" (65)
2.8125" (71)
= window width − 3.4375" (87)
Height
= Depends on sash ratio and specific sill angle of insert window, see below. sill angle deduction
vent opening height
14°
8°
2.75"
2.9375"
0°
(70)
(75)
Equal, Height < 48" (1219) Equal, Height > 48" (1219)
= ( (window height ÷ 2) − sill angle deduction ) − 6.5" (165) = ( (window height ÷ 2) − sill angle deduction ) − 11.5" (292)
Cottage, Height < 48" (1219) Cottage, Height > 48" (1219)
= ( (window height x 2) ÷ 5 − sill angle deduction ) − 6.5" (165) = ( (window height x 2) ÷ 5 − sill angle deduction ) − 11.5" (292)
1.9375" 2.125"
Reverse Cottage, Height < 48" (1219) Reverse Cottage, Height > 48" (1219)
= ( (window height x 2) ÷ 5 − sill angle deduction ) − 6.5" (165) = ( (window height x 2) ÷ 5 − sill angle deduction ) − 11.5" (292)
3.5625" 3.8125" 4.8125"
Width
= window width − 6.0" (152)
Height
= Depends on sash ratio and specific sill angle of insert window, see below.
(49) (90)
(54) (97)
(83)
2.375" (60) (122)
14°
8°
0°
Equal - Upper and Lower Sash
= window height − sill angle deduction
7.875" (200)
8.375" (213)
9.0" (229)
Cottage - Upper Sash or Reverse Cottage - Lower Sash
= (window height x 2) ÷ 5 − sill angle deduction
3.1875" (81)
3.375" (86)
3.625" (92)
Cottage - Lower Sash or Reverse Cottage - Upper Sash
= (window height x 2) ÷ 5 − sill angle deduction
4.75" (121)
5.0625" (129) 5.4375" (138)
Woodwright® Picture and Transom Insert Window Specification Formulas Picture Insert
Transom Insert
Width
= window width − 6.0" (152)
Height
= Depends on sash ratio and specific sill angle of insert window, see below.
= window height − sill angle deduction
80
3.25"
sill angle deduction
unobstructed glass height
unobstructed glass height
Optional Estate™ hardware will reduce clear opening height and vent opening height by 7 ⁄ 32" (6).
Width
sash ratio
Unobstr. Glass
0°
1:1 Equal
sash ratio
Unobstr. Glass
sized windows can be found at andersenwindows.com/measure.
Width
sash ratio
Vent Opening
For picture and transom insert windows, either height or width
Woodwright® Double-Hung Insert Window Specification Formulas Clear Opening
window sill angle.
Width
14°
Height =
sill angle deductions
5.816" (148)
= window width − 6.0" (152)
8°
0°
6.285" (160)
6.890" (175)
window width − 6.0" (152)
• Dimensions in parentheses are in millimeters. • Clear Opening formulas provide dimensions for determining area available for egress. Vent Opening formulas provide dimensions for determining area available for passage of air. Unobstr. Glass (unobstructed glass) formulas provide dimensions for determining area available for passage of light. • Refer to andersenwindows.com/measure for detailed instructions on how to properly measure for insert windows.
Existing Window Measurements Existing Double-Hung Window
Required measurements:
Existing Picture Window
1. Existing Opening Height 2. Existing Sill Angle 3. Existing Opening Width
Existing Exterior Stop Side
Existing Parting Stop (typically removed) Existing Inside Stop
Sto Side p Jamb
Stop
Jamb
ing
Cas
View of Side Jamb 1. Existing Opening Height
ing
Cas
Interior
Interior
View of Side Jamb
Head Jamb
Existing Stool
Head Jamb
View of Head Jamb
View of Head Jamb
Existing Interior Trim Head Jamb Stop
Existing Sill
2. Existing Sill Angle
Interior
Head Jamb Stop
Vertical Section
Jamb
Tape Measure
Existing Interior Trim Existing Inside Stop 3. Existing Opening Width Existing Parting Stop (typically removed) Existing Exterior Stop Existing Exterior Trim
Stool Sill
Stool Sill
Interior
Interior
View of Sill
Horizontal Section
View of Sill
400 Series ® Woodwright Double-Hung Insert Windows
Interior
Stool
Stool
Sill Angle Details
Scale 3" (76) = 1'-0" (305) — 1:4 Select a sill angle that most closely matches your existing sill angle.
Existing Window Sill 11° to 15° Angle
Existing Opening Height
Existing Window Sill 5° to 10° Angle
Existing Opening Height
Existing Window Sill 0° to 4° Angle
Existing Opening Height
Windows with a smaller sill angle will have a larger maximum height.
1 1 ⁄ 16" (27)
5 ⁄ 8" (16)
Exterior
Interior Existing Wall
0° Sill Detail
Existing Wall
8° Sill Detail
Existing Wall
14° Sill Detail
• Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters. • Refer to andersenwindows.com/measure for detailed instructions on how to properly measure for insert windows.
81
WOODWRIGHT DOUBLE-HUNG INSERT WINDOWS ®
Grille Patterns Prairie A
6-Light Prairie
Specified Equal Light
Prairie A
Double-hung patterns are also available in
Specified Equal Light
Upper Sash Only (USO) configurations. For picture window patterns that require alignment
Woodwright Transom Insert
®
Woodwright Double-Hung Insert ®
with double-hung patterns, identify the sash style (equal, cottage, reverse cottage) when ordering. Number of lights and overall pattern
Woodwright Picture Insert
®
Equal Sash
Cottage Sash
Equal Sash
Cottage Sash
Equal Sash
Cottage Sash
varies with window size. Patterns are not available in all configurations. For more information on divided light see page 11 or visit andersenwindows.com/grilles.
Woodwright® Double-Hung Insert Window Details
3 1 ⁄ 4" (83)
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Jamb
Clear Opg. Width Unit Width
3 ⁄ 16"
(5) 3 1 ⁄ 4" (83) Min.*
Andersen® Exterior Trim Stop Cover
Jamb
(6) Min.*
Clear Opening Height
Existing Opening Height
Unit Height
Check Rail Sill Angle Options: 14°, 8°, 0°
Jamb Exterior Trim Strip
14°
3 ⁄ 16"
(5) Min.*
3 ⁄ 16"
(5) Min.*
Existing Opening Width
Sill Vertical Section
(6) Min.*
Horizontal Existing Section Parting Stop Removed 1 ⁄4"
Joining Combinations
Andersen Woodwright Transom Join insert windows in 1-way Double-Hung Insert Window Insert Head
horizontal (stack) or vertical (ribbon) combinations. Do not join insert windows
Check Rail Angle Options:in 2-way combinations. ° 8°, 0°
Clear Opening Height Double-Hung Insert
14°
Sill Double-Hung Double-Hung Insert Insert
Vertical (ribbon) Joining Detail
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 Transom Insert
Andersen® Woodwright® Double-Hung Insert Window
Existing Opening Height
dersen® erior m Stop ver
Interior Trim Strip
3 1 ⁄ 4" (83)
Unit Height
Opening
Andersen Woodwright Double-Hung Insert Window
Head
Andersen® Woodwright® Double-Hung Insert Window
Existing Opening Height
Unit Height
n ght Hung indow
1 ⁄4"
(6) Min.*
1 ⁄4"
Stop d
Existing Parting Stop Removed
Andersen® Exterior Trim Stop Cover
3 1 ⁄ 4" (83)
Picture Insert
Jamb 3 ⁄ 16"
(5) Min.*
Double-Hung Insert
Picture Insert
Interior Trim Strip
Double-Hung Insert
Picture Insert
Clear Opg. Width Unit Width Existing Opening Width
Picture Insert
Jamb 3 ⁄ 16"
(5) Min.*
Andersen® Exterior Exterior Trim Strip Trim Stop Horizontal Section Cover ® Woodwright Double-Hung Insert to Woodwright® Double-Hung Insert
For more joining information see the combination designs section starting on page 255.
• Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters. *Refer to andersenwindows.com/measure for detailed instructions on how to properly measure for insert windows.
82
Ex
400 Series Tilt-Wash Double-Hung Full-Frame Windows
TILT-WASH DOUBLE-HUNG FULL-FRAME WINDOWS
SECTION REFERENCE Tables of Sizes ....................... 86-89 Specifications ......................... 87-91 Grille Patterns .............................. 92 Window Details .......................92-93 Joining Details.............................. 93 Conversion Kits ............................ 94 Combination Designs ................. 255 Performance Data ...................... 269 Warranty .............................290-291
TILT-WASH DOUBLE-HUNG FULL-FRAME WINDOWS FEATURES
A K
E
Frame A Exterior outer frame members are covered with a Perma-Shield® rigid vinyl cladding, minimizing maintenance and providing an attractive appearance.
B For exceptionally long-lasting* performance, sill members are constructed with a wood core and a Fibrex® material exterior. Sill ends are protected and sealed with weather-resistant covers.
J I
H G C
F
C Natural wood stops are available in pine D A factory-applied rigid vinyl anchoring
E An extruded rigid vinyl jamb liner and fin provide a protective seal against the outer frame members. Exclusive slide wash assists make it easy to tilt sash into wash mode position. Jamb liners available in white or gray and must be specified when ordering. Contact your Andersen supplier for details.
a Flexacron® finish is electrostatically applied to penetrate all exterior surfaces for maximum protection and a lustrous finish.
Sandtone
Forest Green
Dark Bronze
Black
Terratone
Pine
White
Naturally occurring variations in grain, color and texture of wood make each window one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
HARDWARE FINISHES
Antique Brass
Black
Bright Brass
Gold Dust
Oil Rubbed Polished Bronze Chrome
Brushed Chrome
Distressed Distressed Bronze Nickel
Satin Nickel
Stone
H Wood sash members are treated with a water-repellent preservative for long-lasting* protection and performance. Interior surfaces are unfinished pine. Low-maintenance prefinished White interiors are also available. traditional mortise-and-tenon construction inside and out.
E
Canvas
Sash G A polyester-stabilized coat with
I Sash joints simulate the look of
H
White B
D
and prefinished White. flange on the head, sill and sides of the outer frame helps secure the unit to the structure.
INTERIOR
EXTERIOR
Glass J Silicone bed glazing provides superior
White
Distressed bronze and oil rubbed bronze are "living" finishes that will change with time and use.
DOUBLE-HUNG HARDWARE STANDARD
ESTATE™
Lock & Keeper
Lock & Keeper
weathertightness and durability.
K High-performance glass options include:
F Weatherstripping throughout the unit provides a long-lasting,* energy-efficient, weather-resistant seal. For the top and bottom rails, an encased foam material is used. The head jamb liner and sill have a rigid vinyl rib that the weatherstripping material compresses against. At the check rail, compressible vinyl bulb material is used. Side jamb liners use leaf-type weatherstripping with foam inserts. Unique block-and-tackle balancers feature sized-to-the-unit, rust-resistant springs that require no adjustment. Glass-reinforced nylon balancer shoes provide smooth, reliable sash operation. They automatically lock the balancer into position when sash are tilted into wash mode.
• Low-E4® glass® • Low-E4® HeatLock™ glass • Low-E4® Sun glass • Low-E4® SmartSun™ glass • Low-E4® SmartSun™ HeatLock™ glass Tempered glass and other glass options are available. Contact your Andersen supplier. A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite. Patterned Glass Patterned glass options are available. See page 10 for more details.
Black | Gold Dust Stone | White
Antique Brass | Bright Brass Brushed Chrome | Distressed Bronze Distressed Nickel | Oil Rubbed Bronze Polished Chrome | Satin Nickel
Stone is standard with natural interior units. White finish comes with prefinished White interiors. Other finishes optional.
Optional Estate lock & keeper reduces the clear opening height by 9⁄16" (14). Check with local building code officials to determine compliance with egress requirements.
OPTIONAL DOUBLE-HUNG LIFT HARDWARE
**
Hand Lift
ESTATE™
Finger Lifts
Antique Brass | Bright Brass | Brushed Chrome | Distressed Bronze Distressed Nickel | Oil Rubbed Bronze | Polished Chrome | Satin Nickel
TRADITIONAL Hand Lift
Finger Lifts
Bar Lift
Antique Brass | Bright Brass | Brushed Chrome | Oil Rubbed Bronze Polished Chrome | Satin Nickel | Stone | White * Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 400 Series Limited Warranty. ** Hardware sold separately.
CLASSIC SERIES™ Hand Lift
Finger Lifts
Dimensions in parentheses are in millimeters. “Flexacron” is a registered trademark of PPG Industries, Inc. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
84
Stone | White Bold name denotes finish shown.
Sash Lift
ACCESSORIES Sold Separately Frame Extension Jambs
Storm/Insect Screen Combination Unit
Insect Screens
A self-storing storm window combined with an insect screen provides greater energy efficiency, while allowing ventilation when needed. They can be easily installed on the exterior of most 400 Series full-frame double-hung windows. Also available for 200 Series Narroline® doublehung windows (made from 1968 to 2013).
Choose full insect screen or half insect screen. Frame colors match product exteriors. Half insect screen (shown above) allows ventilation without affecting the view through the upper sash. They are available for most unit sizes and are not available on windows with Stormwatch protection.
Insect Screen Frames
400 Series tilt-wash double-hung full-frame windows are available with Stormwatch® protection. For a copy of the Andersen® Coastal Product Guide go to andersenwindows.com/coastal or contact your Andersen supplier.
A high inside sill stop and interior/exterior brackets are available to provide additional structural support for tilt-wash units, allowing standard glass units to achieve higher performance grade ratings. Performance Grade (PG) Ratings replace Design Pressure (DP) Ratings for measuring product performance. For up-to-date performance information of individual products, please visit andersenwindows.com. Use of this option will subtract 5⁄8" (16) from clear opening height. PG Upgrade not available for 72" (1829) and 76" (1930) heights. *
Standard jamb depth is 4 1⁄2" (114). Jamb depth can be 4 1⁄8" (105) if installation flange is reversed. Extension jambs are available in unfinished pine or prefinished White. Some sizes may be veneered. Factory-applied and non-applied interior extension jambs are available in 1⁄16" (1.5) increments between 5 1⁄16" (129) and 7 1⁄8" (181). Extension jambs can be factory-applied to either three sides (stool and apron application) or four sides (picture frame casing). Pine Stool
Sash Options
Cottage Style
Available in White, Sandtone and Terratone colors to match product exteriors. Canvas, Forest Green, Dark Bronze and Black available by special order. Construction
Reverse Cottage Style
A clear pine stool is available and ready for finishing. The tilt-wash stool is available in 4 9⁄16" (116) for use in wall depths up to 5 1⁄4" (133), and 6 9⁄16" (167) for use in wall depths up to 7 1⁄8" (181). Works with 2 1⁄4" (57) and 2 1⁄2" (64) wide casings.
Sash Window Opening Control Device Kit
A Window Opening Control Device Kit is available, which limits sash travel to less than 4" (102) when the window is first opened. Available in Stone and White.
Glass Andersen ® Art Glass For more information about glass, patterned glass, art glass, grilles and TruScene® insect screen see pages 10-17. For more information about combination designs, product performance, installation accessories and warranty see pages 255-291 or visit
andersenwindows.com
Available for 400 Series Tilt-Wash transom and picture units. Andersen art glass panels come in a variety of original patterns, including four Frank Lloyd Wright ® Series designs. See pages 213-214 for details on Andersen art glass. Visit andersenwindows.com/artglass for details and pattern information.
Constructed with an aluminum frame, single-pane upper and lower glass panels and charcoal powder-coated aluminum screen mesh.
TruScene ® Insect Screen Exclusive Andersen® TruScene® insect screens provide over 50% more clarity than our conventional insect screens for a beautiful unobstructed view. They allow more fresh air and sunlight in, while doing a better job of keeping out small insects. Conventional Insect Screen
Energy Efficiency
Conventional insect screens have charcoal powder-coated aluminum screen mesh.
Combination units can improve energy efficiency by as much as 35% over windows with clear dual-pane glass and 25% over windows with Low-E glass.
Grilles
Sound Reduction Combination units can improve Sound Transmission Class (STC) and Outdoor Indoor Transmission Class (OITC) ratings. Ideal for projects near airports, busy roadways or other noisy environments. For example, adding a combination unit to a 400 Series tilt-wash double-hung (3862) unit with Low-E4® glass will improve its STC rating from 26 to 32. Contact your Andersen supplier for additional STC and OITC rating information. NOTE: Do not add combination units to windows with Low-E4 Sun glass, unless window glass is tempered. Application of combination units may affect the performance of Low-E4 and Low-E4 SmartSun™ glass exterior coating. Combination units may also reduce the overall clear operable area of the window. See your local code official for egress requirements in your area.
Grilles are available in a variety of configurations and widths. For double-hung grille patterns see page 92.
Exterior Trim This product is available with Andersen® Exterior Trim. See pages 215-220 for details. CAUTION: • Painting and staining may cause damage to rigid vinyl. • 400 Series windows in Terratone color may be painted any color lighter than Terratone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Terratone any color darker than Terratone. • Do not paint 400 Series windows with White, Canvas, Sandtone, Forest Green, Dark Bronze or Black exterior colors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
* Infringes on the overall net clear opening. Unit clear operable area may not meet egress requirements. See your local building code official for more information. Dimensions in parentheses are in millimeters. “Frank Lloyd Wright” is a registered trademark of the Frank Lloyd Wright Foundation.
85
400 Series Tilt-Wash Double-Hung Full-Frame Windows
Performance Grade (PG) Upgrade
TILT-WASH DOUBLE-HUNG FULL-FRAME WINDOWS Table of Tilt-Wash Double-Hung Window Sizes Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Window Dimension
1'-9 5 ⁄ 8" (549)
2'-1 5 ⁄ 8" (651)
2'-5 5 ⁄ 8" (752)
2'-7 5 ⁄ 8" (803)
2'-9 5 ⁄ 8" (854)
2'-11 5 ⁄ 8" (905)
3'-1 5 ⁄ 8" (956)
3'-5 5 ⁄ 8" (1057)
3'-9 5 ⁄ 8" (1159)
Minimum Rough Opening
1'-10 1 ⁄ 8" (562)
2'-2 1 ⁄ 8" (664)
2'-6 1 ⁄ 8" (765)
2'-8 1 ⁄ 8" (816)
2'-10 1 ⁄ 8" (867)
3'-0 1 ⁄ 8" (917)
3'-2 1 ⁄ 8" (968)
3'-6 1 ⁄ 8" (1070)
3'-10 1 ⁄ 8" (1172)
15" (381)
19" (483)
23" (584)
25" (635)
27" (686)
29" (737)
31" (787)
35" (889)
39" (991)
TW18210
TW20210
TW24210
TW26210
TW28210
TW210210
TW30210
TW34210
TW38210
13 15 ⁄ 16" (354)
Grille patterns shown on page 92. Size tables for windows with cottage
15 15 ⁄ 16" (405)
3'-0 7 ⁄ 8" (937) 3'-4 7 ⁄ 8" (1038)
3'-4 7 ⁄ 8" (1038)
3'-0 7 ⁄ 8" (937)
Unobstructed Glass (lower sash only)
or reverse cottage sash are now TW2432
TW2632
TW2832
TW21032
TW3032
TW3432
TW3832
17 15 ⁄ 16" (456)
TW2032
TW2036
TW2436
TW2636
TW2836
TW21036
TW3036
TW3436
TW3836
TW18310
TW20310
TW24310
TW26310
TW28310
TW210310
TW30310
TW34310
TW38310
TW1842
TW2042
TW2442
TW2642
TW2842
TW21042
TW3042
TW3442
TW3842
TW1846
TW2046
TW2446
TW2646
TW2846
TW21046
TW3046◊
TW3446◊
TW3846◊
TW18410
TW20410
TW24410
TW26410
TW28410
TW210410◊
TW30410◊
TW34410◊
TW38410◊
TW1852
TW2052
TW2452
TW2652
TW2852◊
TW21052◊
TW3052◊
TW3452◊
TW3852◊
TW1856
TW2056
TW2456
TW2656◊
TW2856◊
TW21056◊
TW3056◊
TW3456◊
TW3856◊
TW18510
TW20510
TW24510◊ TW26510◊
TW28510◊
TW210510◊
TW30510◊
TW34510◊
TW38510◊
TW1862
TW2062
TW2462◊
TW2662◊
TW2862◊
TW21062◊
TW3062◊
TW3462◊
Cottage or reverse cottage sash ratio available for these widths in all heights.
Reverse Cottage
29 15 ⁄ 16" (760)
27 15 ⁄ 16" (710)
25 15 ⁄ 16" (659)
23 15 ⁄ 16" (608)
21 15 ⁄ 16" (557)
Cottage
31 15 ⁄ 16" (811)
TW3862◊ continued on next page
86
available on andersenwindows.com.
19 15 ⁄ 16" (506)
TW1836
33 15 ⁄ 16" (862)
3'-8 7 ⁄ 8" (1140) 4'-0 7 ⁄ 8" (1241) 4'-4 7 ⁄ 8" (1343) 4'-8 7 ⁄ 8" (1445) 5'-0 7 ⁄ 8" (1546) 5'-4 7 ⁄ 8" (1648) 5'-8 7 ⁄ 8" (1749) 6'-0 7 ⁄ 8" (1851) 6'-4 7 ⁄ 8" (1953)
6'-4 7 ⁄ 8" (1953)
6'-0 7 ⁄ 8" (1851)
5'-8 7 ⁄ 8" (1749)
5'-4 7 ⁄ 8" (1648)
5'-0 7 ⁄ 8" (1546)
4'-8 7 ⁄ 8" (1445)
4'-4 7 ⁄ 8" (1343)
4'-0 7 ⁄ 8" (1241)
3'-8 7 ⁄ 8" (1140)
TW1832
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. ◊ Meet or exceed clear opening area of 5.7 sq.ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610). See tables on pages 90-91.
Table of Tilt-Wash Double-Hung Window Sizes
(continued)
Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Window Dimension
1'-9 5 ⁄ 8" (549)
2'-1 5 ⁄ 8" (651)
2'-5 5 ⁄ 8" (752)
2'-7 5 ⁄ 8" (803)
2'-9 5 ⁄ 8" (854)
2'-11 5 ⁄ 8" (905)
3'-1 5 ⁄ 8" (956)
3'-5 5 ⁄ 8" (1057)
3'-9 5 ⁄ 8" (1159)
Minimum Rough Opening
1'-10 1 ⁄ 8" (562)
2'-2 1 ⁄ 8" (664)
2'-6 1 ⁄ 8" (765)
2'-8 1 ⁄ 8" (816)
2'-10 1 ⁄ 8" (867)
3'-0 1 ⁄ 8" (917)
3'-2 1 ⁄ 8" (968)
3'-6 1 ⁄ 8" (1070)
3'-10 1 ⁄ 8" (1172)
15" (381)
19" (483)
23" (584)
25" (635)
27" (686)
29" (737)
31" (787)
35" (889)
39" (991)
39 15 ⁄ 16" (1014)
TW2472◊
TW2072◊
TW2672◊
TW2872◊
TW21072◊
TW3072◊
TW3472◊
TW3872◊
Andersen® reinforced joining materials
41 15 ⁄ 16" (1065)
7'-8 7 ⁄ 8" (2359)
7'-8 7 ⁄ 8" (2359)
TW1872
Windows 7'-4 7 ⁄ 8" (2257) and 7'-8 7 ⁄ 8" (2359) high have interior and exterior brackets. Interior brackets, located on both sides of the check rail, must be flipped up for proper product performance.
must be used when vertically joining 7'-4 7 ⁄ 8" (2257) and 7'-8 7 ⁄ 8" (2359) high windows. TW1876
TW2076◊
TW2476◊
TW2676◊
TW2876◊
TW21076◊
TW3076◊
TW3476◊
TW3876◊
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. ◊ Meet or exceed clear opening area of 5.7 sq.ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610). See tables on pages 90-91.
Tilt-Wash Transom Window Area Specifications
Tilt-Wash Transom Window Area Specifications
Window Number
Glass Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2)
TWT1810
0.56
(0.05)
1.80
TWT1815
1.32
(0.12)
2.90
TWT1817
1.52
(0.14)
TWT18111
1.94
TWT1821
Grille patterns shown on page 92.
Tilt-Wash Transom Window Area Specifications
Window Number
Glass Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2)
Window Number
Glass Area Sq. Ft./(m2)
(0.17)
TWT26111
3.23
(0.30)
5.56
(0.27)
TWT2621
3.58
(0.33)
6.00
3.20
(0.30)
TWT2623
3.93
(0.37)
(0.18)
3.80
(0.35)
TWT2627
4.62
2.15
(0.20)
4.10
(0.38)
TWT2631
TWT1823
2.35
(0.22)
4.40
(0.41)
TWT1827
2.77
(0.26)
5.00
TWT1831
3.39
(0.32)
TWT2010
0.70
TWT2015
Overall Window Area Sq. Ft./(m2)
(0.52)
TWT3027
5.73
(0.53)
8.70
(0.81)
(0.56)
TWT3031
7.02
(0.65)
10.27
(0.95)
6.44
(0.60)
TWT3410
1.30
(0.12)
3.47
(0.32)
(0.43)
7.32
(0.68)
TWT3415
3.07
(0.29)
5.58
(0.52)
5.66
(0.53)
8.63
(0.80)
TWT3417
3.56
(0.33)
6.16
(0.57)
TWT2810
1.00
(0.09)
2.80
(0.26)
TWT34111
4.53
(0.42)
7.32
(0.68)
(0.47)
TWT2815
2.37
(0.22)
4.51
(0.42)
TWT3421
5.02
(0.47)
7.89
(0.73)
5.90
(0.55)
TWT2817
2.74
(0.26)
4.98
(0.46)
TWT3423
5.50
(0.51)
8.47
(0.79)
(0.07)
2.14
(0.20)
TWT28111
3.49
(0.32)
5.91
(0.55)
TWT3427
6.47
(0.60)
9.63
(0.90)
1.67
(0.16)
3.44
(0.32)
TWT2821
3.87
(0.36)
6.38
(0.59)
TWT3431
7.93
(0.74)
11.36
(1.06)
TWT2017
1.93
(0.18)
3.79
(0.35)
TWT2823
4.24
(0.39)
6.84
(0.64)
TWT3810
1.45
(0.14)
3.80
(0.35)
TWT20111
2.46
(0.23)
4.50
(0.42)
TWT2827
4.99
(0.46)
7.78
(0.72)
TWT3815
3.42
(0.32)
6.12
(0.57)
TWT2021
2.72
(0.25)
4.86
(0.45)
TWT2831
6.12
(0.57)
9.18
(0.85)
TWT3817
3.97
(0.37)
6.75
(0.63)
TWT2023
2.98
(0.28)
5.22
(0.49)
TWT21010
1.07
(0.10)
2.97
(0.28)
TWT38111
5.05
(0.47)
8.02
(0.75)
TWT2027
3.51
(0.33)
5.93
(0.55)
TWT21015
2.55
(0.24)
4.78
(0.44)
TWT3821
5.59
(0.52)
8.65
(0.80)
TWT2031
4.30
(0.40)
7.00
(0.65)
TWT21017
2.95
(0.27)
5.27
(0.49)
TWT3823
6.13
(0.57)
9.29
(0.86)
TWT2410
0.85
(0.08)
2.47
(0.23)
TWT210111
3.75
(0.35)
6.26
(0.58)
TWT3827
7.21
(0.67)
10.55
(0.98)
TWT2415
2.02
(0.19)
3.97
(0.37)
TWT21021
4.15
(0.39)
6.76
(0.63)
TWT3831
8.84
(0.82)
12.46
(1.16)
TWT2417
2.34
(0.22)
4.38
(0.41)
TWT21023
4.56
(0.42)
7.25
(0.67)
TWT31010
1.51
(0.14)
3.94
(0.37)
TWT24111
2.98
(0.28)
5.21
(0.48)
TWT21027
5.36
(0.50)
8.24
(0.77)
TWT4210
1.66
(0.15)
4.28
(0.40)
TWT2421
3.29
(0.31)
5.62
(0.52)
TWT21031
6.57
(0.61)
9.73
(0.90)
TWT41010
1.95
(0.18)
4.94
(0.46)
TWT2423
3.61
(0.34)
6.03
(0.56)
TWT3010
1.15
(0.11)
3.14
(0.29)
TWT5610
2.25
(0.21)
5.61
(0.52)
TWT2427
4.25
(0.40)
6.85
(0.64)
TWT3015
2.72
(0.25)
5.05
(0.47)
TWT6210
2.55
(0.24)
6.28
(0.58)
TWT2431
5.21
(0.48)
8.09
(0.75)
TWT3017
3.15
(0.29)
5.57
(0.52)
TWT2610
0.93
(0.09)
2.64
(0.25)
TWT30111
4.01
(0.37)
6.61
(0.61)
TWT2615
2.19
(0.20)
4.24
(0.39)
TWT3021
4.44
(0.41)
7.14
(0.66)
TWT2617
2.54
(0.24)
4.68
(0.44)
TWT3023
4.87
(0.45)
7.66
(0.71)
400 Series Tilt-Wash Double-Hung Full-Frame Windows
7'-4 7 ⁄ 8" (2257)
7'-4 7 ⁄ 8" (2257)
Unobstructed Glass (lower sash only)
• Dimensions in parentheses are in square meters.
87
TILT-WASH DOUBLE-HUNG FULL-FRAME WINDOWS Table of Tilt-Wash Transom Window Sizes Scale 1 ⁄ 8" = 1'-0" (1:96) Window Dimension
1'-9 5 ⁄ 8" (549)
2'-1 5 ⁄ 8" (651)
2'-5 5 ⁄ 8" (752)
2'-7 5 ⁄ 8" (803)
2'-9 5 ⁄ 8" (854)
2'-11 5 ⁄ 8" (905)
3'-1 5 ⁄ 8" (956)
3'-5 5 ⁄ 8" (1057)
3'-9 5 ⁄ 8" (1159)
3'-11 5 ⁄ 16" (1202)
4'-3 5 ⁄ 16" (1303)
Minimum Rough Opening
1'-10 1 ⁄ 8" (562)
2'-2 1 ⁄ 8" (664)
2'-6 1 ⁄ 8" (765)
2'-8 1 ⁄ 8" (816)
2'-10 1 ⁄ 8" (867)
3'-0 1 ⁄ 8" (917)
3'-2 1 ⁄ 8" (968)
3'-6 1 ⁄ 8" (1070)
3'-10 1 ⁄ 8" (1172)
3'-11 7 ⁄ 8" (1215)
4'-3 7 ⁄ 8" (1318)
15" (380)
19" (482)
23" (583)
25" (635)
27" (685)
29" (737)
31" (787)
35" (888)
39" (990)
40 11 ⁄ 16" (1033)
44 11 ⁄ 16" (1135)
TWT1810 TWT2010
TWT2410
TWT2610
TWT2810
TWT21010
TWT3010
TWT3410
TWT3810
TWT31010
TWT4210
TWT1815 TWT2015
TWT2415
TWT2615
TWT2815
TWT21015
TWT3015
TWT3415
TWT3815
5 3 ⁄ 8" (136) 20 11 ⁄ 16" 18 11 ⁄ 16" 14 11 ⁄ 16" 12 11 ⁄ 16" (474) (372) (321) (525)
TWT2417
TWT2617
TWT2817
TWT21017
TWT3017
TWT3417
TWT3817
TWT18111 TWT20111 TWT24111
TWT26111
TWT28111
TWT210111
TWT30111
TWT34111
TWT38111
TWT1821 TWT2021
TWT2421
TWT2621
TWT2821
TWT21021
TWT3021
TWT3421
TWT3821
TWT1823 TWT2023
TWT2423
TWT2623
TWT2823
TWT21023
TWT3023
TWT3423
TWT3823
TWT1827 TWT2027
TWT2427
TWT2627
TWT2827
TWT21027
TWT3027
TWT3427
TWT3827
TWT1831 TWT2031
TWT2431
TWT2631
TWT2831
TWT21031
TWT3031
TWT3431
TWT3831
TWT1817 TWT2017
Grille patterns shown on page 92.
32 11 ⁄ 16" (829)
26 11 ⁄ 16" (677)
22 11 ⁄ 16" (575)
1'-7 7 ⁄ 8" 1'-0 1 ⁄ 2" (318) (504) 2'-37 ⁄ 8" (707) 2'-5 7 ⁄ 8" (758) 2'-9 7 ⁄ 8" (860) 3'-3 7 ⁄ 8" (1012)
2'-1 7 ⁄ 8" 1'-9 7 ⁄ 8" (555) (657)
2'-3 5 ⁄ 16" 2'-1 5 ⁄ 16" 1'-9 5 ⁄ 16" 1'-7 5 ⁄ 16" (643) (694) (541) (491) 2'-5 5 ⁄ 16" (745) 3'-3 5 ⁄ 16" (999)
2'-9 5 ⁄ 16" (846)
1'-0" (305)
Unobstructed Glass
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
Tilt-Wash Picture Window Area Specifications
Tilt-Wash Picture Window Area Specifications
Tilt-Wash Picture Window Area Specifications
Window Number
Glass Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2)
Window Number
DHP10310
2.03
(0.19)
4.07
(0.38)
DHP34410
13.58
DHP1042
2.22
(0.21)
4.41
(0.41)
DHP3452
14.60
(1.26)
17.60
(1.64)
DHP42510
21.03
(1.95)
25.97
(2.41)
(1.36)
18.75
(1.74)
DHP4262
22.32
(2.07)
27.39
DHP1046
2.42
(0.23)
4.74
(0.44)
DHP3456
(2.55)
15.62
(1.45)
19.91
(1.85)
DHP410310
15.60
(1.45)
20.13
DHP10410
2.61
(0.24)
5.07
(0.47)
(1.87)
DHP34510
16.64
(1.55)
21.07
(1.96)
DHP41042
17.11
(1.59)
21.78
DHP1052
2.81
(0.26)
5.41
(2.02)
(0.50)
DHP3462
17.66
(1.64)
22.22
(2.06)
DHP41046
18.62
(1.73)
23.43
DHP1056
3.01
(0.28)
(2.18)
5.74
(0.53)
DHP310310
12.16
(1.13)
16.06
(1.49)
DHP410410
20.13
(1.87)
25.07
DHP10510
3.20
(2.33)
(0.30)
6.07
(0.56)
DHP31042
13.33
(1.24)
17.37
(1.61)
DHP41052
21.64
(2.01)
26.72
DHP1062
(2.48)
3.40
(0.32)
6.41
(0.60)
DHP31046
14.51
(1.35)
18.69
(1.74)
DHP41056
23.15
(2.15)
28.37
(2.64)
DHP30310
9.38
(0.87)
12.77
(1.19)
DHP310410
15.69
(1.46)
20.00
(1.86)
DHP410510
24.66
(2.29)
30.02
(2.79)
DHP3042
10.29
(0.96)
13.82
(1.28)
DHP31052
16.87
(1.57)
21.32
(1.98)
DHP41062
26.17
(2.43)
31.66
(2.94)
DHP3046
11.19
(1.04)
14.86
(1.38)
DHP31056
18.04
(1.68)
22.63
(2.10)
DHP56310
17.89
(1.66)
22.85
(2.12)
DHP30410
12.10
(1.12)
15.91
(1.48)
DHP310510
19.22
(1.79)
23.94
(2.22)
DHP5642
19.63
(1.82)
24.72
(2.30)
DHP3052
13.01
(1.21)
16.95
(1.58)
DHP31062
20.40
(1.90)
25.26
(2.35)
DHP5646
21.36
(1.98)
26.59
(2.47)
DHP3056
13.92
(1.29)
18.00
(1.67)
DHP42310
13.30
(1.24)
17.42
(1.62)
DHP56410
23.09
(2.15)
28.46
(2.64)
DHP30510
14.83
(1.38)
19.04
(1.77)
DHP4242
14.56
(1.35)
18.83
(1.75)
DHP5652
24.83
(2.31)
30.33
(2.82)
DHP3062
15.73
(1.46)
20.09
(1.87)
DHP4246
15.88
(1.48)
20.27
(1.88)
DHP5656
26.56
(2.47)
32.20
(2.99)
DHP34310
10.53
(0.98)
14.13
(1.31)
DHP42410
17.17
(1.60)
21.69
(2.02)
DHP56510
28.29
(2.63)
34.07
(3.17)
DHP3442
11.54
(1.07)
15.28
(1.42)
DHP4252
18.46
(1.72)
23.12
(2.15)
DHP5662
30.02
(2.79)
35.93
(3.34)
DHP3446
12.56
(1.17)
16.44
(1.53)
DHP4256
19.75
(1.84)
24.54
(2.28)
88
Overall Window Area Sq. Ft./(m2)
Window Number
Glass Area Sq. Ft./(m2)
Glass Area Sq. Ft./(m2)
• Dimensions in parentheses are in square meters.
Overall Window Area Sq. Ft./(m2)
4'-11 5 ⁄ 16" (1057)
5'-7 5 ⁄ 16" (1710)
6'-3 5 ⁄ 16" (1913)
4'-11 7 ⁄ 8" (1070)
5'-7 7 ⁄ 8" (1724)
6'-3 7 ⁄ 8" (1927)
52 11 ⁄ 16" (905)
60 11 ⁄ 16" (1556)
68 11 ⁄ 16" (1745)
TWT41010
TWT5610
TWT6210
Table of Tilt-Wash Picture Window Sizes Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 1'-0" (305)
3'-1 5 ⁄ 8" (956)
3'-5 5 ⁄ 8" (1057)
3'-11 5 ⁄ 16" (1202)
4'-3 5 ⁄ 16" (1303)
4'-11 5 ⁄ 16" (1507)
5'-7 5 ⁄ 16" (1710)
Minimum Rough Opening
1'-0 1 ⁄ 2" (318)
3'-2 1 ⁄ 8" (968)
3'-6 1 ⁄ 8" (1070)
3'-11 7 ⁄ 8" (1216)
4'-3 7 ⁄ 8" (1318)
4'-11 7 ⁄ 8" (1521)
5'-7 7 ⁄ 8" (1724)
Unobstructed Glass
7 1 ⁄ 16" (179)
32 11 ⁄ 16" (830)
36 11 ⁄ 16" (932)
42 3 ⁄ 8" (1076)
46 3 ⁄ 8" (1178)
54 3 ⁄ 8" (1381)
62 3 ⁄ 8" (1584)
41 5 ⁄ 16" (1049)
DHP34310
DHP310310
DHP42310
DHP410310
DHP56310
DHP1042
DHP3042
DHP3442
DHP31042
DHP4242
DHP41042
DHP5642
DHP1046
DHP3046
DHP3446
DHP31046
DHP4246
DHP41046
DHP5646
DHP10410 DHP30410
DHP34410
DHP310410
DHP42410
DHP410410
DHP56410
DHP1052
DHP3052
DHP3452
DHP31052
DHP4252
DHP41052
DHP5652
DHP1056
DHP3056
DHP3456
DHP31056
DHP4256
DHP41056
DHP5656
DHP10510 DHP30510
DHP34510
DHP310510
DHP42510
DHP410510
DHP56510
Grille patterns shown on page 92.
65 5 ⁄ 16" (1659)
61 5 ⁄ 16" (1557)
400 Series Tilt-Wash Double-Hung Full-Frame Windows
57 5 ⁄ 16" (1456)
53 5 ⁄ 16" (1355)
49 5 ⁄ 16" (1253)
45 5 ⁄ 16" (1151)
DHP10310 DHP30310
69 5 ⁄ 16" (1761)
4'-0 7 ⁄ 8" (1241) 4'-4 7 ⁄ 8" (1343) 4'-8 7 ⁄ 8" (1445) 5'-0 7 ⁄ 8" (1547) 5'-4 7 ⁄ 8" (1648) 5'-8 7 ⁄ 8" (1749) 6'-0 7 ⁄ 8" (1851) 6'-4 7 ⁄ 8" (1953)
6'-4 7 ⁄ 8" (1953)
6'-0 7 ⁄ 8" (1851)
5'-8 7 ⁄ 8" (1749)
5'-4 7 ⁄ 8" (1648)
5'-0 7 ⁄ 8" (1547)
4'-8 7 ⁄ 8" (1445)
4'-4 7 ⁄ 8" (1343)
4'-0 7 ⁄ 8" (1241)
Window Dimension
DHP1062
DHP3062
DHP3462
DHP31062
DHP4262
DHP41062
DHP5662
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
89
TILT-WASH DOUBLE-HUNG FULL-FRAME WINDOWS Tilt-Wash Double-Hung Window Opening and Area Specifications Clear Opening in Full Open Position Window Number
Clear Opening Area Sq. Ft./(m2)
Width Inches/(mm)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Area Sq. Ft./(m2)
Top of Subfloor to Top of Inside Sill Stop Inches/(mm)
Overall Window Area Sq. Ft./(m2)
TW18210
1.77
(0.16)
17 7/8"
(454)
14 1/4"
(362)
2.90
(0.27)
1.78
(0.17)
48 1/2"
(1231)
5.53
(0.51)
TW1832
2.02
(0.19)
17 7/8"
(454)
16 1/4"
(412)
3.32
(0.31)
2.03
(0.19)
44 1/2"
(1130)
6.14
(0.57)
TW1836
2.26
(0.21)
17 7/8"
(454)
18 1/4"
(463)
3.74
(0.35)
2.28
(0.21)
40 1/2"
(1028)
6.74
(0.63)
TW18310
2.51
(0.23)
17 7/8"
(454)
20 1/4"
(514)
4.15
(0.39)
2.53
(0.24)
36 1/2"
(926)
7.34
(0.68)
TW1842
2.76
(0.26)
17 7/8"
(454)
22 1/4"
(565)
4.57
(0.43)
2.78
(0.26)
32 1/2"
(825)
7.94
(0.74)
TW1846
3.01
(0.28)
17 7/8"
(454)
24 1/4"
(616)
4.98
(0.46)
3.02
(0.28)
28 1/2"
(723)
8.54
(0.79)
TW18410
3.26
(0.30)
17 7/8"
(454)
26 1/4"
(666)
5.40
(0.50)
3.27
(0.30)
24 1/2"
(622)
9.14
(0.85)
TW1852
3.51
(0.33)
17 7/8"
(454)
28 1/4"
(717)
5.81
(0.54)
3.52
(0.33)
20 1/2"
(520)
9.74
(0.91)
TW1856
3.75
(0.35)
17 7/8"
(454)
30 1/4"
(768)
6.23
(0.58)
3.77
(0.35)
16 1/2"
(418)
10.34
(0.96)
TW18510
4.00
(0.37)
17 7/8"
(454)
32 1/4"
(819)
6.65
(0.62)
4.02
(0.37)
12 1/2"
(317)
10.94
(1.02)
opening specifications for windows
TW1862
4.25
(0.40)
17 7/8"
(454)
34 1/4"
(870)
7.06
(0.66)
4.26
(0.40)
8 1/2"
(215)
11.54
(1.07)
with Stormwatch® Protection visit
TW1872
5.00
(0.46)
17 7/8"
(454)
40 1/4"
(1022)
8.32
(0.77)
5.03
(0.47)
10 1/4" *
(260)*
13.35
(1.24)
TW1876
5.24
(0.49)
17 7/8"
(454)
42 1/4"
(1073)
8.74
(0.81)
5.27
(0.49)
6 1/4" *
(159)*
13.95
(1.30)
7
1
1
Opening calculations change when using PG Upgrade sill stop. For
andersenwindows.com/openingspecs.
TW20210
2.16
(0.20)
21 /8"
(556)
14 /4"
(362)
3.68
(0.34)
2.18
(0.20)
48 /2"
(1231)
6.56
(0.61)
TW2032
2.47
(0.23)
21 7/8"
(556)
16 1/4"
(412)
4.21
(0.39)
2.48
(0.23)
44 1/2"
(1130)
7.27
(0.68)
For cottage and reverse cottage sash
TW2036
2.77
(0.26)
21 7/8"
(556)
18 1/4"
(463)
4.73
(0.44)
2.79
(0.26)
40 1/2"
(1028)
7.98
(0.74)
opening specifications, visit
TW20310
3.07
(0.29)
21 7/8"
(556)
20 1/4"
(514)
5.26
(0.49)
3.09
(0.29)
36 1/2"
(926)
8.69
(0.81)
TW2042
3.38
(0.31)
21 7/8"
(556)
22 1/4"
(565)
5.79
(0.54)
3.40
(0.32)
32 1/2"
(825)
9.41
(0.87)
TW2046
3.68
(0.34)
7
21 /8"
(556)
1
24 /4"
(616)
6.31
(0.59)
3.70
(0.34)
1
28 /2"
(724)
10.12
(0.94)
TW20410
3.99
(0.37)
21 7/8"
(556)
26 1/4"
(666)
6.84
(0.64)
4.00
(0.37)
24 1/2"
(622)
10.83
(1.01)
TW2052
4.29
(0.40)
21 7/8"
(556)
28 1/4"
(717)
7.37
(0.69)
4.31
(0.40)
20 1/2"
(520)
11.54
(1.07)
TW2056
4.59
(0.43)
21 7/8"
(556)
30 1/4"
(768)
7.89
(0.73)
4.61
(0.43)
16 1/2"
(418)
12.25
(1.14)
TW20510
4.90
(0.46)
21 7/8"
(556)
32 1/4"
(819)
8.42
(0.78)
4.92
(0.46)
12 1/2"
(317)
12.96
(1.20)
TW2062
5.20
(0.48)
21 7/8"
(556)
34 1/4"
(870)
8.95
(0.83)
5.22
(0.49)
8 1/2"
(215)
13.68
(1.27)
TW2072 ◊
6.11
(0.57)
21 7/8"
(556)
40 1/4"
(1022)
10.54
(0.98)
6.14
(0.57)
10 1/4" *
(260)*
15.82
(1.47)
TW2076 ◊
6.42
(0.60)
21 7/8"
(556)
42 1/4"
(1073)
11.06
(1.03)
6.45
(0.60)
6 1/4" *
(159)*
16.53
(1.54)
TW24210
2.56
(0.24)
25 7/8"
(657)
14 1/4"
(362)
4.46
(0.41)
2.58
(0.24)
48 1/2"
(1231)
7.58
(0.70)
TW2432
2.92
(0.27)
25 7/8"
(657)
16 1/4"
(412)
5.09
(0.47)
2.94
(0.27)
44 1/2"
(1130)
8.40
(0.78)
TW2436
3.28
(0.31)
25 7/8"
(657)
18 1/4"
(463)
5.73
(0.53)
3.30
(0.31)
40 1/2"
(1028)
9.23
(0.86)
TW24310
3.64
(0.34)
25 7/8"
(657)
20 1/4"
(514)
6.37
(0.59)
3.66
(0.34)
36 1/2"
(926)
10.05
(0.93)
TW2442
4.00
(0.37)
25 7/8"
(657)
22 1/4"
(565)
7.01
(0.65)
4.02
(0.37)
32 1/2"
(825)
10.87
(1.01)
TW2446
4.36
(0.41)
25 7/8"
(657)
24 1/4"
(616)
7.65
(0.71)
4.38
(0.41)
28 1/2"
(723)
11.70
(1.09)
TW24410
4.71
(0.44)
25 7/8"
(657)
26 1/4"
(666)
8.28
(0.77)
4.74
(0.44)
24 1/2"
(622)
12.52
(1.16)
TW2452
5.07
(0.47)
25 7/8"
(657)
28 1/4"
(717)
8.92
(0.83)
5.10
(0.47)
20 1/2"
(520)
13.34
(1.24)
TW2456
5.43
(0.51)
25 7/8"
(657)
30 1/4"
(768)
9.56
(0.89)
5.46
(0.51)
16 1/2"
(418)
14.17
(1.32)
TW24510 ◊
5.79
(0.54)
25 7/8"
(657)
32 1/4"
(819)
10.20
(0.95)
5.81
(0.54)
12 1/2"
(317)
14.99
(1.39)
TW2462 ◊
6.15
(0.57)
25 7/8"
(657)
34 1/4"
(870)
10.84
(1.01)
6.17
(0.57)
8 1/2"
(215)
15.81
(1.47)
TW2472 ◊
7.23
(0.67)
25 7/8"
(657)
40 1/4"
(1022)
12.76
(1.19)
7.26
(0.68)
10 1/4" *
(260)*
18.28
(1.70)
TW2476 ◊
7.59
(0.71)
25 7/8"
(657)
42 1/4"
(1073)
13.40
(1.25)
7.62
(0.71)
6 1/4" *
(159)*
19.11
(1.78)
TW26210
2.76
(0.26)
27 7/8"
(708)
14 1/4"
(362)
4.84
(0.45)
2.78
(0.26)
48 1/2"
(1231)
8.09
(0.75)
TW2632
3.14
(0.29)
27 7/8"
(708)
16 1/4"
(412)
5.54
(0.52)
3.17
(0.30)
44 1/2"
(1130)
8.97
(0.83)
TW2636
3.53
(0.33)
27 7/8"
(708)
18 1/4"
(463)
6.23
(0.58)
3.55
(0.33)
40 1/2"
(1028)
9.85
(0.92)
TW26310
3.92
(0.36)
27 7/8"
(708)
20 1/4"
(514)
6.92
(0.64)
3.94
(0.37)
36 1/2"
(926)
10.73
(1.00)
TW2642
4.30
(0.40)
27 7/8"
(708)
22 1/4"
(565)
7.62
(0.71)
4.33
(0.40)
32 1/2"
(825)
11.61
(1.08)
TW2646
4.69
(0.44)
27 7/8"
(708)
24 1/4"
(616)
8.31
(0.77)
4.71
(0.44)
28 1/2"
(723)
12.49
(1.16)
TW26410
5.08
(0.47)
27 7/8"
(708)
26 1/4"
(666)
9.01
(0.84)
5.10
(0.47)
24 1/2"
(622)
13.36
(1.24)
TW2652
5.47
(0.51)
27 7/8"
(708)
28 1/4"
(717)
9.70
(0.90)
5.49
(0.51)
20 1/2"
(520)
14.24
(1.32)
TW2656 ◊
5.85
(0.54)
27 7/8"
(708)
30 1/4"
(768)
10.39
(0.96)
5.88
(0.55)
16 1/2"
(418)
15.12
(1.41)
TW26510 ◊
6.24
(0.58)
27 7/8"
(708)
32 1/4"
(819)
11.09
(1.03)
6.26
(0.58)
12 1/2"
(317)
16.00
(1.49)
TW2662 ◊
6.63
(0.62)
27 7/8"
(708)
34 1/4"
(870)
11.78
(1.09)
6.65
(0.62)
8 1/2"
(215)
16.88
(1.57)
TW2672 ◊
7.79
(0.72)
27 7/8"
(708)
40 1/4"
(1022)
13.86
(1.29)
7.82
(0.73)
10 1/4" *
(260)*
19.52
(1.81)
TW2676 ◊
8.18
(0.76)
27 7/8"
(708)
42 1/4"
(1073)
14.56
(1.35)
8.21
(0.76)
6 1/4" *
(159)*
20.40
(1.89)
TW28210
2.95
(0.27)
29 7/8"
(759)
14 1/4"
(362)
5.23
(0.49)
2.98
(0.28)
48 1/2"
(1231)
8.61
(0.80)
TW2832
3.37
(0.31)
29 7/8"
(759)
16 1/4"
(412)
5.98
(0.56)
3.39
(0.32)
44 1/2"
(1130)
9.54
(0.89)
TW2836
3.78
(0.35)
7
29 /8"
(759)
1
18 /4"
(463)
6.73
(0.63)
3.81
(0.35)
1
40 /2"
(1028)
10.47
(0.97)
TW28310
4.20
(0.39)
29 7/8"
(759)
20 1/4"
(514)
7.48
(0.70)
4.22
(0.39)
36 1/2"
(926)
11.41
(1.06)
TW2842
4.61
(0.43)
29 7/8"
(759)
22 1/4"
(565)
8.23
(0.77)
4.64
(0.43)
32 1/2"
(825)
12.34
(1.15)
TW2846
5.03
(0.47)
29 7/8"
(759)
24 1/4"
(616)
8.98
(0.83)
5.05
(0.47)
28 1/2"
(723)
13.28
(1.23)
TW28410
5.44
(0.51)
29 7/8"
(759)
26 1/4"
(666)
9.73
(0.90)
5.47
(0.51)
24 1/2"
(622)
14.21
(1.32)
TW2852 ◊
5.86
(0.54)
29 7/8"
(759)
28 1/4"
(717)
10.48
(0.97)
5.88
(0.55)
20 1/2"
(520)
15.14
(1.41)
continued on next page
90
andersenwindows.com/openingspecs.
• "Top of Subfloor to Top of Inside Sill Stop" is calculated based upon a structural header height of 6'-10 1/2" (2096) except for 7'-5" and 7'-9" heights which are calculated using a header height of 8' (2438). • Dimensions in parentheses are in millimeters or square meters. ◊ Meet or exceed clear opening area of 5.7 sq. ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610). *Calculated based upon a structural header height of 8' (2438).
(continued)
Clear Opening in Full Open Position Vent Area Sq. Ft./(m2)
Top of Subfloor to Top of Inside Sill Stop Inches/(mm)
Overall Window Area Sq. Ft./(m2)
(1.04)
6.30
(0.59)
16 1/2"
(418)
16.08
(1.11)
6.71
(0.62)
12 1/2"
(317)
17.01
(1.58)
12.72
(1.18)
7.13
(0.66)
8 1/2"
(215)
17.95
(1.67)
Window Number
Clear Opening Area Sq. Ft./(m2)
TW2856 ◊
6.27
(0.58)
29 7/8"
(759)
30 1/4"
(768)
11.22
TW28510 ◊
6.69
(0.62)
29 7/8"
(759)
32 1/4"
(819)
11.97
TW2862 ◊
7.10
(0.66)
29 7/8"
(759)
34 1/4"
(870)
Width Inches/(mm)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
(1.49)
TW2872 ◊
8.35
(0.78)
29 7/8"
(759)
40 1/4"
(1022)
14.98
(1.39)
8.38
(0.78)
10 1/4" *
(260)*
20.75
(1.93)
TW2876 ◊
8.77
(0.81)
29 7/8"
(759)
42 1/4"
(1073)
15.72
(1.46)
8.80
(0.82)
6 1/4" *
(159)*
21.69
(2.01)
TW210210
3.15
(0.29)
31 7/8"
(809)
14 1/4"
(362)
5.62
(0.52)
3.18
(0.30)
48 1/2"
(1231)
9.12
(0.85)
TW21032
3.59
(0.33)
31 7/8"
(809)
16 1/4"
(412)
6.42
(0.60)
3.62
(0.34)
44 1/2"
(1130)
10.11
(0.94)
TW21036
4.04
(0.38)
31 7/8"
(809)
18 1/4"
(463)
7.23
(0.67)
4.06
(0.38)
40 1/2"
(1028)
11.10
(1.03)
TW210310
4.48
(0.42)
31 7/8"
(809)
20 1/4"
(514)
8.03
(0.75)
4.51
(0.42)
36 1/2"
(926)
12.09
(1.12)
TW21042
4.92
(0.46)
31 7/8"
(809)
22 1/4"
(565)
8.84
(0.82)
4.95
(0.46)
32 1/2"
(825)
13.08
(1.22)
opening specifications for windows
TW21046
5.36
(0.50)
31 7/8"
(809)
24 1/4"
(616)
9.64
(0.90)
5.39
(0.50)
28 1/2"
(723)
14.07
(1.31)
with Stormwatch® Protection visit
TW210410 ◊
5.81
(0.54)
31 7/8"
(809)
26 1/4"
(666)
10.45
(0.97)
5.83
(0.54)
24 1/2"
(622)
15.05
(1.40)
TW21052 ◊
6.25
(0.58)
31 7/8"
(809)
28 1/4"
(717)
11.25
(1.05)
6.28
(0.58)
20 1/2"
(520)
16.04
(1.49)
TW21056 ◊
6.69
(0.62)
7
31 /8"
(809)
1
30 /4"
(768)
12.06
(1.12)
6.72
(0.62)
1
16 /2"
(418)
17.03
(1.59)
TW210510 ◊
7.14
(0.66)
31 7/8"
(809)
32 1/4"
(819)
12.86
(1.20)
7.16
(0.67)
12 1/2"
(317)
18.02
(1.67)
For cottage and reverse cottage sash
TW21062 ◊
7.58
(0.70)
31 7/8"
(809)
34 1/4"
(870)
13.67
(1.27)
7.60
(0.71)
8 1/2"
(215)
19.01
(1.77)
TW21072 ◊
8.91
(0.83)
31 7/8"
(810)
40 1/4"
(1022)
16.08
(1.49)
8.94
(0.83)
10 1/4" *
(260)*
21.99
(2.04)
opening specifications, visit
TW21076 ◊
9.35
(0.87)
31 7/8"
(810)
42 1/4"
(1073)
16.90
(1.57)
9.38
(0.87)
6 1/4" *
(159)*
22.98
(2.13)
TW30210
3.35
(0.31)
33 7/8"
(860)
14 1/4"
(362)
6.01
(0.56)
3.38
(0.31)
48 1/2"
(1231)
9.63
(0.90)
TW3032
3.82
(0.36)
33 7/8"
(860)
16 1/4"
(412)
6.87
(0.64)
3.85
(0.36)
44 1/2"
(1130)
10.67
(0.99)
TW3036
4.29
(0.40)
33 7/8"
(860)
18 1/4"
(463)
7.73
(0.72)
4.32
(0.40)
40 1/2"
(1028)
11.72
(1.09)
TW30310
4.76
(0.44)
33 7/8"
(860)
20 1/4"
(514)
8.59
(0.80)
4.79
(0.45)
36 1/2"
(926)
12.76
(1.19)
TW3042
5.23
(0.49)
33 7/8"
(860)
22 1/4"
(565)
9.45
(0.88)
5.26
(0.49)
32 1/2"
(825)
13.81
(1.28)
TW3046 ◊
5.70
(0.53)
33 7/8"
(860)
24 1/4"
(616)
10.31
(0.96)
5.73
(0.53)
28 1/2"
(723)
14.85
(1.38)
TW30410 ◊
6.17
(0.57)
33 7/8"
(860)
26 1/4"
(666)
11.17
(1.04)
6.20
(0.58)
24 1/2"
(622)
15.90
(1.48)
TW3052 ◊
6.64
(0.62)
33 7/8"
(860)
28 1/4"
(717)
12.03
(1.12)
6.67
(0.62)
20 1/2"
(520)
16.95
(1.58)
TW3056 ◊
7.11
(0.66)
33 7/8"
(860)
30 1/4"
(768)
12.89
(1.20)
7.14
(0.66)
16 1/2"
(418)
17.99
(1.67)
TW30510 ◊
7.58
(0.70)
33 7/8"
(860)
32 1/4"
(819)
13.75
(1.28)
7.61
(0.71)
12 1/2"
(317)
19.04
(1.77)
TW3062 ◊
8.05
(0.75)
33 7/8"
(860)
34 1/4"
(870)
14.61
(1.36)
8.08
(0.75)
8 1/2"
(215)
20.08
(1.87)
TW3072 ◊
9.47
(0.88)
33 7/8"
(860)
40 1/4"
(1022)
17.20
(1.60)
9.50
(0.88)
10 1/4" *
(260)*
23.22
(2.16)
TW3076 ◊
9.94
(0.92)
33 7/8"
(860)
42 1/4"
(1073)
18.06
(1.68)
9.97
(0.93)
6 1/4" *
(159)*
24.27
(2.25)
TW34210
3.74
(0.35)
37 7/8"
(962)
14 1/4"
(362)
6.79
(0.63)
3.78
(0.35)
48 1/2"
(1231)
10.65
(0.99)
TW3432
4.27
(0.40)
37 7/8"
(962)
16 1/4"
(412)
7.76
(0.72)
4.30
(0.40)
44 1/2"
(1130)
11.81
(1.10)
TW3436
4.80
(0.45)
37 7/8"
(962)
18 1/4"
(463)
8.73
(0.81)
4.83
(0.45)
40 1/2"
(1028)
12.97
(1.21)
TW34310
5.32
(0.49)
37 7/8"
(962)
20 1/4"
(514)
9.70
(0.90)
5.35
(0.50)
36 1/2"
(926)
14.12
(1.31)
TW3442
5.85
(0.54)
37 7/8"
(962)
22 1/4"
(565)
10.67
(0.99)
5.88
(0.55)
32 1/2"
(825)
15.28
(1.42)
TW3446 ◊
6.37
(0.59)
37 7/8"
(962)
24 1/4"
(616)
11.64
(1.08)
6.41
(0.60)
28 1/2"
(723)
16.43
(1.53)
TW34410 ◊
6.90
(0.64)
37 7/8"
(962)
26 1/4"
(666)
12.61
(1.17)
6.93
(0.64)
24 1/2"
(622)
17.59
(1.63)
TW3452 ◊
7.43
(0.69)
37 7/8"
(962)
28 1/4"
(717)
13.58
(1.26)
7.46
(0.69)
20 1/2"
(520)
18.75
(1.74)
TW3456 ◊
7.95
(0.74)
37 7/8"
(962)
30 1/4"
(768)
14.55
(1.35)
7.98
(0.74)
16 1/2"
(418)
19.90
(1.85)
TW34510 ◊
8.48
(0.79)
37 7/8"
(962)
32 1/4"
(819)
15.53
(1.44)
8.51
(0.79)
12 1/2"
(317)
21.06
(1.96)
TW3462 ◊
9.01
(0.84)
37 7/8"
(962)
34 1/4"
(870)
16.50
(1.53)
9.04
(0.84)
8 1/2"
(215)
22.22
(2.06)
TW3472 ◊
10.59
(0.98)
37 7/8"
(962)
40 1/4"
(1022)
19.42
(1.80)
10.62
(0.99)
10 1/4" *
(260)*
25.69
(2.39)
TW3476 ◊
11.11
(1.03)
37 7/8"
(962)
42 1/4"
(1073)
20.38
(1.89)
11.14
(1.04)
6 1/4" *
(159)*
26.85
(2.49)
TW38210
4.14
(0.39)
41 7/8"
(1064)
14 1/4"
(362)
7.56
(0.70)
4.17
(0.39)
48 1/2"
(1231)
11.68
(1.09)
TW3832
4.72
(0.44)
41 7/8"
(1064)
16 1/4"
(412)
8.64
(0.80)
4.76
(0.44)
44 1/2"
(1130)
12.94
(1.20)
TW3836
5.30
(0.49)
41 7/8"
(1064)
18 1/4"
(463)
9.72
(0.90)
5.34
(0.50)
40 1/2"
(1028)
14.21
(1.32)
TW38310
5.88
(0.55)
41 7/8"
(1064)
20 1/4"
(514)
10.81
(1.00)
5.92
(0.55)
36 1/2"
(926)
15.48
(1.44)
TW3842
6.47
(0.60)
41 7/8"
(1064)
22 1/4"
(565)
11.89
(1.11)
6.50
(0.60)
32 1/2"
(825)
16.75
(1.56)
TW3846 ◊
7.05
(0.66)
41 7/8"
(1064)
24 1/4"
(616)
12.97
(1.21)
7.08
(0.66)
28 1/2"
(723)
18.01
(1.67)
TW38410 ◊
7.63
(0.71)
41 7/8"
(1064)
26 1/4"
(666)
14.05
(1.31)
7.66
(0.71)
24 1/2"
(622)
19.28
(1.79)
TW3852 ◊
8.21
(0.76)
41 7/8"
(1064)
28 1/4"
(717)
15.14
(1.41)
8.25
(0.77)
20 1/2"
(520)
20.55
(1.91)
TW3856 ◊
8.79
(0.82)
41 7/8"
(1064)
30 1/4"
(768)
16.22
(1.51)
8.83
(0.82)
16 1/2"
(418)
21.62
(2.01)
TW38510 ◊
9.37
(0.87)
41 7/8"
(1064)
32 1/4"
(819)
17.30
(1.61)
9.41
(0.87)
12 1/2"
(317)
23.08
(2.14)
TW3862 ◊
9.96
(0.93)
41 7/8"
(1064)
34 1/4"
(870)
18.38
(1.71)
9.99
(0.93)
8 1/2"
(215)
24.35
(2.26)
TW3872 ◊
11.70
(1.09)
41 7/8"
(1064)
40 1/4"
(1022)
21.64
(2.01)
11.73
(1.09)
10 1/4" *
(260)*
28.16
(2.26)
TW3876 ◊
12.29
(1.14)
41 7/8"
(1064)
42 1/4"
(1073)
22.72
(2.11)
12.32
(1.14)
6 1/4" *
(159)*
29.43
(2.73)
Opening calculations change when using PG Upgrade sill stop. For
andersenwindows.com/openingspecs.
andersenwindows.com/openingspecs.
400 Series Tilt-Wash Double-Hung Full-Frame Windows
Tilt-Wash Double-Hung Window Opening and Area Specifications
• "Top of Subfloor to Top of Inside Sill Stop" is calculated based upon a structural header height of 6'-10 1/2" (2096) except for 7'-5" and 7'-9" heights which are calculated using a header height of 8' (2438). • Dimensions in parentheses are in millimeters or square meters. ◊ Meet or exceed clear opening area of 5.7 sq. ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610). *Calculated based upon a structural header height of 8' (2438).
91
TILT-WASH DOUBLE-HUNG FULL-FRAME WINDOWS Divided Light Patterns Diamond*
Prairie A
6-Light Prairie
Double-hung window patterns are also available in Upper Sash
Colonial
Only (USO) configurations. For picture window patterns that require alignment with double-hung patterns, identify the sash
Tilt-Wash Double-Hung
style (equal, cottage or reverse cottage) when ordering. Number of lights and overall pattern varies with window size. Patterns are not available in all configurations. Equal Sash
Cottage Sash
Diamond*
Equal Sash
Cottage Sash
Prairie A
Equal Sash
Cottage Sash
Equal Sash
Cottage Sash
Modified** Modified** Colonial Colonial SCR
Colonial
Tall Fractional
(Simulated Check Rail)
Tall Fractional SCR
Short Fractional
(Simulated Check Rail)
Short Fractional SCR
Victorian
(Simulated Check Rail)
Tilt-Wash Picture
Tilt-Wash Transom
*Available only in Simulated Divided Light (SDL) configuration and only in 3/4" (19) and 7/8" (22) widths. **Location from top of window to bottom of divided light pattern is available at 8" (203), 10 " (254), 12" (305), center and custom dimensions.
Specified Equal Light Examples
Specified equal light and custom patterns are also available. For more information on divided light see page 11 or visit andersenwindows.com/grilles. Specified Equal Light Examples
Custom Pattern Examples
1 11 ⁄ 16" (43)
Custom Pattern Examples
Tilt-Wash Double-Hung Window Details
1 5 ⁄ 16" (33)
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Jamb
4 1 ⁄ 2" (114)
Jamb
Lower Sash in Open Position
Insect Screen
1 ⁄ 4"
(6) Min.
3 ⁄ 8"
(10)
Stool
Check Rail
1 1 ⁄ 2" Clear Opg. Height
Jamb
Head
5 ⁄ 8"
Check Rail
3 ⁄ 8"
(10)
1 ⁄ 2"
(13)
• Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. Sill • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. Vertical Section • Dimensions in parentheses are in millimeters.
92
1 1 ⁄ 2" (38) Stool
2 7 ⁄ 16" (62)
Vertical Vertical Section Section
Horizontal Section
(38)
(16)
Sill
Horizontal Section
Lower Sash in Open Position
Unit Dim.Glass Unit Dim. Low-E4® Insulating 2 71⁄ 16⁄ 16 " " (1.5) (62) 1 1 ⁄ 2" (38) Low-E4® Insulating Glass
3 9 ⁄ 16" (90)
4 1 ⁄ 2" Jamb(114)1 7 ⁄ 8" Jamb Clear Opg. Width 1 7 ⁄ 8" (37) (37) Unit Dim. Width 1 ⁄ 4" (6) 5 1 ⁄ 4" (6) 1 ⁄ 16" Min. (33) Min. Minimum Rough Opening Width Jamb 1 7 ⁄ 8" Clear Opg. Width 1 7 ⁄ 8" (37) Section (37) Horizontal Unit Dim. Width 1 ⁄ 4" (6) Min. Minimum Rough Opening Width
Head
Unit Dimension Height
Upper Sash Lower Sash
Clear Opg. 3 9 ⁄ 16" Minimum Rough Opening Height Height (90)
1 5 ⁄ 16" (33)
3 5 ⁄ 16" (84)
4 1 ⁄ 2" (114) 2 7 ⁄ 16" (62)
Insect Screen Unit Dimension Height
4 1 ⁄ 2" (114)
1 5 ⁄ 16" (33)
Upper Sash Lower Sash Minimum Rough Opening Height
3 5 ⁄ 16" (84)
Sill 1 ⁄ 2"Stop 1 to (38) Subfloor 5 ⁄Dimension 8" (16) 2 7 ⁄ 16" (62) 1 ⁄ 2"
(13)
Sill Stop to Subfloor Dimension
⁄ 16" 2 7Jamb 2 7 ⁄ 16" Jamb 2 7 ⁄ 16" 2 7 ⁄ 16" (62) Unobstructed (62) Unobstructed Glass (62)Glass (62)
Jamb
Unit Dimension Unit Width Dimension Width
1 ⁄ 4" (6) (6) Minimum Rough Opening Width Minimum Rough Opening Width
2 7 ⁄ 16" (62)2 7 ⁄ 16" (62) 1 ⁄ 2"
1 ⁄ 4"
(6)
3 ⁄ 8"
(10)
3 ⁄ 8"
Jamb 3 5 ⁄ 16" (84)
Jamb
1 ⁄ 4"
1 ⁄ 4"(6)
(6)
3 5 ⁄ 16" (84)
Head
Head
3 5 ⁄ 16" (84)
Separate Rough Openings Detail
Vertical Support
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 by Others
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Sill
Jamb Overall Window DimensionJamb Height
Unit Dim.
Unit Dim. 2" (51) (Ref.)
(3)
3 5 ⁄ 16" (84)
1 ⁄ 16" (1.5)
appearance, windows may be installed into separate rough openings having vertical support (by others) in combination with Andersen® exterior filler and exterior vinyl trim.
1 11 ⁄ 16" (43) 2 ⁄ 16" (62) Jamb Jamb 7
Jamb
Head Vertical Section Transom (TWT) over Tilt-Wash Double-Hung
400 Series Unit Dim. Tilt-Wash Height Double-Hung Full-Frame Windows
Overall window dimension height.*
1 ⁄ 8"
Unit Dim. Height
To meet structural requirements or to achieve a wider joined
Sum of individual window heights Overall Rough Opening Height
Sill
Vertical Section Vertical Section Vertical Section
Horizontal (stack) Joining Detail
plus 1 ⁄ 16" (1.5) for each join.
3 5 ⁄ 16" (84)
1 ⁄ 4"(6)
Sill
HorizontalHorizontal Section Horizontal Section Section
3 5 ⁄ 16" (84)
Vertical Support by Others Jamb
Andersen® Filler and Vinyl Trim
1 ⁄ 8"
(43) Unit Dim.
Jamb
Overall Window Dimension Width
1 ⁄ 16"
JambUnit Dim. (1.5)
Sum of individual window widths plus 1 ⁄ 16" (1.5) for each join. Overall Rough Opening Width Overall window dimension width plus 1 ⁄ 2" (13).
Unit Dim. 1 ⁄ 16"
For more joining information see the combination designs section starting on page 255.
Unit Dim. (1.5)
Horizontal Section Tilt-Wash Double-Hung to Tilt-Wash Double-Hung
Andersen® Filler and Vinyl Trim
Vertical Support by Others Unit Dim. Unit Dim. Jamb Jamb 2" (51) (Ref.) Horizontal Section Tilt-Wash Double-Hung and Tilt-Wash Double-Hung
1 ⁄ 8"
Sill
(3) • Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages Unit Dim. Unit Dim. 288-289. 2" (51) • Details are for illustration only and are not intended to represent product installation methods (Ref.) guides at andersenwindows.com. or materials. Refer to product installation • Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. • Dimensions in parentheses are in millimeters. *For stacks where bottom unit in combination is a double-hung or picture window with a sloped sill. If bottom window has a straight sill add 1/2" (13) to the overall window dimension height. Unit Dim. Height
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
1 11 ⁄ 16"
Unit Dim. Height
(3)
Vertical (ribbon) Joining Detail
Unit Dim. Height
(6)
Unit Dimension Height
3 5 ⁄ 16" 3 5 ⁄ 16" Unobstructed Unobstructed Glass Glass (84) (84)
Unit Dimension Unit Width Dimension Width 1 ⁄ 1 ⁄ 4" 4" (6) (6) Minimum Rough Opening Width Minimum Rough Opening Width
1 ⁄ 4"
Sill
1 ⁄ 4"(6)
Minimum Rough Opening Height
Jamb 3 5 ⁄ 16" (84)
Unit Dimension Height
1 5 ⁄ 16" (33) Jamb
Minimum Rough Opening Height
1 ⁄ 4"(6)
1 5 ⁄ 16" (33)
(13)
4 1 ⁄ 2" (114)4 1 ⁄ 2" (114) 1 5 ⁄ 16" (33)1 5 ⁄ 16" (33)
(38) = 1'-0" (305) — 1:8
4 1 ⁄ 2" (114)
1 ⁄ 2"
Vertical Section Vertical Section Vertical Section
Tilt-Wash Transom Window Details
4 1 ⁄ 2" (114)
(13)
(10)
HorizontalHorizontal Section Section Horizontal Section
Scale
Stool
1 1 ⁄ 2" (38) 1 1 ⁄ 2" (38) 5 ⁄ 8" (16) 5 ⁄ 8" (16)
Sill
11 ⁄ 2"
Stool
Head
Unobstr. Glass
1 ⁄ 4"
(6)
Head
Unobstr. Glass
1 ⁄ 4"
Unobstr. Glass
1 5 ⁄ 16" (33) Jamb
2 7 ⁄ 16" (62)2 7 ⁄ 16" (62)
5 1 ⁄ 16" (129)
1 5 ⁄ 16" (33)
Minimum Opening Height 5 1 ⁄ 16" RoughUnobstr. (129) Glass Unit Dimension Height
4 1 ⁄ 2" (114)
Minimum Rough Opening Height
4 1 ⁄ 2" (114)
Unit Dimension Height
4 1 ⁄ 2" (114)4 1 ⁄ 2" (114) 1 5 ⁄ 16" 1 5 ⁄ 16" (33) (33) 3 ⁄ 8" (10) 3 ⁄ 8" (10)
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Unit Dim. Height
sen® and rim
Tilt-Wash Picture Window Details
93
Head
NARROLINE DOUBLE-HUNG CONVERSION KIT ®
FEATURES Narroline® Double-Hung Window Identification
Narroline® Double-Hung Window Conversion Kits are designed specifically to update existing Narroline windows (made from 1968 to 2013) to tilt-wash windows. They provide quick and easy installation with less mess than traditional window replacement, because there are no window frame tear-out or trim modifications.
Unobstructed Glass Width Inches/(mm)
Window Number
16 7/16"
(418)
13 15/16"
(354)
16 7/16"
(418)
15 15/16"
(405)
1832
16 7/16"
(418)
19 15/16"
(506)
18310
16 7/16"
(418)
21 15/16"
(557)
1842
16 7/16"
(418)
23 15/16"
(608)
1846
16 7/16"
(418)
27 15/16"
(710)
1852
16 7/16"
(418)
35 15/16"
(913)
1856
16 7/16"
(418)
33 15/16"
(862)
1862
20 7/16"
(519)
13 15/16"
(354)
20210
20 7/16"
(519)
15 15/16"
(405)
2032
20 7/16"
(519)
19 15/16"
(506)
20310
20 7/16"
(519)
21 15/16"
(557)
2042
Glass
20 7/16"
(519)
23 15/16"
(608)
2046
20 7/16"
(519)
27 15/16"
(710)
2052
High-performance glass options include:
20 7/16"
(519)
35 15/16"
(913)
3856
20 7/16"
(519)
33 15/16"
(862)
2062
24 7/16"
(621)
13 15/16"
(354)
24210
24 7/16"
(621)
15 15/16"
(405)
2432
24 7/16"
(621)
19 15/16"
(506)
24310
24 7/16"
(621)
21 15/16"
(557)
2442
24 7/16"
(621)
23 15/16"
(608)
2446
24 7/16"
(621)
27 15/16"
(710)
2452
24 7/16"
(621)
35 15/16"
(913)
3856
24 7/16"
(621)
33 15/16"
(862)
2462
28 7/16"
(722)
13 15/16"
(354)
28210
28 7/16"
(722)
15 15/16"
(405)
2832
28 7/16"
(722)
19 15/16"
(506)
28310
28 7/16"
(722)
21 15/16"
(557)
2842
28 7/16"
(722)
23 15/16"
(608)
2846
28 7/16"
(722)
27 15/16"
(710)
2852
28 7/16"
(722)
35 15/16"
(913)
3856
28 7/16"
(722)
33 15/16"
(862)
2862
32 7/16"
(824)
13 15/16"
(354)
30210
32 7/16"
(824)
15 15/16"
(405)
3032
32 7/16"
(824)
19 15/16"
(506)
30310
32 7/16"
(824)
21 15/16"
(557)
3042
32 7/16"
(824)
23 15/16"
(608)
3046
32 7/16"
(824)
27 15/16"
(710)
3052
32 7/16"
(824)
35 15/16"
(913)
3856
32 7/16"
(824)
33 15/16"
(862)
3062
36 7/16"
(926)
13 15/16"
(354)
34210
36 7/16"
(926)
15 15/16"
(405)
3432
36 7/16"
(926)
19 15/16"
(506)
34310
36 7/16"
(926)
21 15/16"
(557)
3442
36 7/16"
(926)
23 15/16"
(608)
3446
36 7/16"
(926)
27 15/16"
(710)
3452
STORM/INSECT SCREEN COMBINATION UNIT
36 7/16"
(926)
35 15/16"
(913)
3856
36 7/16"
(926)
33 15/16"
(862)
3462
40 7/16"
(1027)
13 15/16"
(354)
38210
For product information, see page 61 (Woodwright® double-hung windows) or page 85 (400 Series Tilt-Wash double-hung windows).
40 7/16"
(1027)
15 15/16"
(405)
3832
40 7/16"
(1027)
19 15/16"
(506)
38310
40 7/16"
(1027)
21 15/16"
(557)
3842
40 7/16"
(1027)
23 15/16"
(608)
3846
40 7/16"
(1027)
27 15/16"
(710)
3852
40 7/16"
(1027)
35 15/16"
(913)
3856
40 7/16"
(1027)
33 15/16"
(862)
3862
Each kit includes: Upper and lower sash with your choice of Low-E4® glass options Jamb liners Balancers Lock and keeper
• • • •
• Low-E4® glass® • Low-E4® HeatLock™ glass • Low-E4® Sun glass • Low-E4® SmartSun™ glass • Low-E4® SmartSun™ HeatLock™ glass Tempered glass and other glass options are available. Contact your Andersen supplier. A removable translucent film helps shield the glass from damage during delivery and installation and simplifies finishing at the jobsite. High-performance Low-E4 glass is 45% more energy-efficient than ordinary dual-pane glass in winter and 56% more energy-efficient in summer.*
See videos of Narroline Double-Hung Window Conversion Kit features and installation at andersenwindows.com/narroline.
EXTERIOR
®
Low Maintenance
White
Sandtone
Terratone
INTERIOR
Sash tilt inward for easy cleaning of window exteriors from inside the home (no need for ladders). Pine
White
Naturally occurring variations in grain, color and texture of wood make each window one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
400 Series Conversion Kit
Unobstructed Glass Height** Inches/(mm)
®
* Values are based on comparison of Andersen tilt-wash double-hung window SHGC to the SHGC for clear dualpane glass non-metal frame default values from the 2006, 2009 and 2012 International Energy Conservation Code. ** Unobstructed Glass Height dimensions in table are for lower sash only. Dimensions in parentheses are in millimeters. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
94
18210
TILT-WASH DOUBLE-HUNG INSERT WINDOWS CUSTOM SIZING in 1â &#x201E;8" (3) increments
SECTION REFERENCE Sizes ............................................ 98 Existing Window Measurements ... 99 Sill Angle Details .......................... 99 Grille Patterns ............................ 100 Joining Detail ............................. 100 Performance Data ...................... 269 Warranty .............................290-291 Dimensions in parentheses are in millimeters.
400 Series Tilt-Wash Double-Hung Insert Windows
Window Details .......................... 100
TILT-WASH DOUBLE-HUNG INSERT WINDOWS E
FEATURES Frame A Fibrex® material exterior protects the
K A
frame – beautifully. Best of all, it's lowmaintenance and never needs painting*.
B For exceptionally long-lasting performance, sill members are constructed with a wood core and a Fibrex® material exterior. Sill ends are protected and sealed with weather-resistant covers.
J
C
provides a long-lasting,* energy-efficient, weather-resistant seal. For the top and bottom rails, an encased foam material is used. The head jamb liner and sill have a rigid vinyl rib that the weatherstripping material compresses against. At the check rail, compressible vinyl bulb material is used. Side jamb liners use leaf-type weatherstripping with foam inserts.
E Exterior stop covers are specially designed to allow easy application of high-quality sealant.
Canvas
Sandtone
Forest Green
Dark Bronze
Black
Pine
Terratone
White
G D B
C Natural wood stops are available in D Weatherstripping throughout the unit
White I
H
*
pine and prefinished White.
INTERIOR
EXTERIOR
F
Sash Slide wash assists make it easy to tilt the sash into wash mode.
Naturally occurring variations in grain, color and texture of wood make each window one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
HARDWARE FINISHES
G A polyester-stabilized coat with a Flexacron® finish is electrostatically applied to penetrate all exterior surfaces for maximum protection and a lustrous finish.
H Wood sash members are treated with a water-repellent preservative for long-lasting* protection and performance. Interior surfaces are unfinished pine. Low-maintenance prefinished White interiors are also available.
I Sash joints simulate the look of
3 1/4" (83) “pocket window” jamb depth allows convenient replacement without disturbing interior window trim for most double-hung replacement situations.
traditional mortise-and-tenon construction inside and out.
F Jamb liners available in white or gray
J Silicone bed glazing provides superior
and must be specified when ordering. Contact your Andersen supplier for details.
K High-performance glass
Glass weathertightness and durability.
Antique Brass
Black
Bright Brass
Gold Dust
Oil Rubbed Polished Chrome Bronze
Brushed Chrome
Distressed Distressed Bronze Nickel
Satin Nickel
Stone
White
Distressed bronze and oil rubbed bronze are "living" finishes that will change with time and use.
DOUBLE-HUNG HARDWARE STANDARD
ESTATE™
Lock & Keeper
Lock & Keeper
options include:
H F
• Low-E4® glass® • Low-E4® HeatLock™ glass • Low-E4® Sun glass • Low-E4® SmartSun™ glass • Low-E4® SmartSun™ HeatLock™ glass Tempered glass and other glass options are available. Contact your Andersen supplier.
Unique block-and-tackle balancers feature sized-to-the-unit, rust-resistant springs that require no adjustment. Glass-reinforced nylon balancer shoes provide smooth, reliable sash operation. They automatically lock the balancer into position when sash are tilted into wash mode.
A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite.
Black | Gold Dust Stone | White
Antique Brass | Bright Brass Brushed Chrome | Distressed Bronze Distressed Nickel | Oil Rubbed Bronze Polished Chrome | Satin Nickel
Stone is standard with natural interior units. White finish comes with prefinished White interiors. Other finishes optional.
Optional Estate lock & keeper reduces the clear opening height by 9⁄16" (14). Check with local building code officials to determine compliance with egress requirements.
OPTIONAL DOUBLE-HUNG LIFT HARDWARE
**
Hand Lift
ESTATE™
Finger Lifts
Patterned Glass Patterned glass options are available. See page 10 for more details.
Antique Brass | Bright Brass | Brushed Chrome | Distressed Bronze Distressed Nickel | Oil Rubbed Bronze | Polished Chrome | Satin Nickel
TRADITIONAL Hand Lift
Finger Lifts
Bar Lift
Antique Brass | Bright Brass | Brushed Chrome | Oil Rubbed Bronze Polished Chrome | Satin Nickel | Stone | White * Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 400 Series Limited Warranty. ** Hardware sold separately.
CLASSIC SERIES™ Hand Lift
Finger Lifts
Dimensions in parentheses are in millimeters. “Flexacron” is a registered trademark of PPG Industries, Inc. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
Stone | White Bold name denotes finish shown.
96
Sash Lift
ACCESSORIES Sold Separately Exterior Stop Cover
An exterior stop cover provides a clean transition from new window to the existing window casing.
Included Installation Materials
Flat, self-hanging shims, backer rod, installation screws and complete instructions are included with each insert window. Measurement guide and worksheet at andersenwindows.com/measure.
Sash Options*
Sill Angles
Insect Screen Frames
A Window Opening Control Device Kit is available, which limits sash travel to less than 4" (102) when the window is first opened. Available in Stone and White. Device shown on a 400 Series Tilt-Wash Double-Hung window.
Coil Stock
Exclusive Andersen® TruScene® insect screens provide over 50% more clarity than our conventional insect screens for a beautiful unobstructed view. They allow more fresh air and sunlight in, while doing a better job of keeping out small insects.
Reverse Cottage Style
Conventional Insect Screen Andersen® aluminum coil stock can be ordered to match any of our 11 trim colors. Made from .019-gauge aluminum, Andersen coil stock is available in 24" (610) x 50' (15,240) rolls. Colormatched stainless steel trim nails 1 1/4" (32) long are also available and can be ordered in 1 lb. or 454 gram boxes.
Glass ®
Andersen Art Glass
14° Sill Angle
Choose full insect screen or half insect screen. Half insect screen (shown above) allows ventilation without affecting the view through the upper sash. Frames are available in colors to match product exteriors. TruScene ® Insect Screen
Cottage Style
8° Sill Angle
Insect Screens
Window Opening Control Device Kit
Installation
Three sill angles are available — 0,° 8° and 14° — to closely match the existing sill in window replacement applications. See page 99 for more details.
0° Sill Angle
Sash
Available for tilt-wash transom and picture units. Andersen art glass panels come in a variety of original patterns, including four Frank Lloyd Wright ® Series designs. See pages 213-214 for details on Andersen art glass. Visit andersenwindows.com/artglass for details and pattern information.
Conventional insect screens have charcoal powder-coated aluminum screen mesh.
Grilles Grilles are available in a variety of configurations and widths. For double-hung grille patterns see page 100. CAUTION: • Painting and staining may cause damage to rigid vinyl. • 400 Series windows in Terratone color may be painted any color lighter than Terratone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Terratone any color darker than Terratone. • Do not paint 400 Series windows with White, Canvas, Sandtone, Forest Green, Dark Bronze or Black exterior colors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
For more information about product performance, installation accessories and warranty see pages 269-291 or visit
andersenwindows.com
* Shown on 400 Series Tilt-Wash double-hung full-frame windows. Dimensions in parentheses are in millimeters. “Frank Lloyd Wright” is a registered trademark of the Frank Lloyd Wright Foundation.
97
400 Series Tilt-Wash Double-Hung Insert Windows
For more information about glass, patterned glass, art glass, grilles and TruScene® insect screen see pages 10-17.
TILT-WASH DOUBLE-HUNG INSERT WINDOWS Tilt-Wash Double-Hung Insert Window Sizes Double-Hung - 2:3 Cottage & 3:2 Reverse Cottage Sash
Double-Hung - Equal Sash
(1949) (1975)
(1962)
between minimum and maximum
window sill angle.
Transom 11 1 ⁄ 2"
11 1 ⁄ 2"
(1981)
to to to to to to to to toto to to ⁄ 2" 12 1 ⁄ 2" 12" 12 1 ⁄ 2"11 1 12" 11 1 ⁄ 2" (318) (305) (292) 1 ⁄ 21"⁄ 2"(292) 1 ⁄ 2" 12" (305) 1112 12" 11 2 1 ⁄ 2" (318) 18) (305) (292) (318) (305) (292) 0° 8° 0° 14° 8° Sill Angle 14° Sill Angle 0° Sill Angle 8° 14° Sill Angle 0° 8° 14°
78"
(1981) 78" (1981)
to
to to 11 1 ⁄ 2" (292) 1 ⁄ 2" 11
to 11 1 ⁄ 2" 11 1 ⁄ 2" (292) (292)
CUSTOM HEIGHTS CUSTOM HEIGHTS
(1956)
78" 78" (1981)
CUSTOM HEIGHTS
(1969)
⁄ 2" 11 178" 78" to 1 to (292) (1981) (1981) ⁄ 2" 11 1 ⁄ 2" (292) 78" 11 78" to to (292) (1981)(292) (1981) CUSTOM WIDTHS CUSTOM WIDTHS CUSTOM WIDTHS CUSTOM WIDTHS CUSTOM HEIGHTS
⁄ 2" 11 178" 78" to 1 to (292) (1981) (1981) ⁄ 2" 11 1 ⁄ 2" (292) 78" 11 78" to to (292) (1981)(292) (1981) CUSTOM WIDTHS CUSTOM WIDTHS 0° 8°0° 14°8° 14° CUSTOM WIDTHS CUSTOM WIDTHS 8° 14° 0° 8° 14° ⁄ 2" 77" 78" 77 178" 77 1 ⁄ 2" 77" (1981) (1981) (1969) 1 ⁄ 2" (1956) 77" 77" 77 1 ⁄ 2" (1969) 78" (1956) 77 (1956) (1981)
(1949)
to to to to to to widths and heights. Height limits to to toto to to ⁄4"3 ⁄4" 42 1 ⁄4" 43 3 ⁄ 8" 42 433 ⁄34"⁄ 8"42 142 for double-hung and picture insert (1102) (1086) (1073) 1 ⁄4" 42 3 ⁄4" (1086) 42 42 3 ⁄4" 42 431 ⁄43"⁄ 8"(1073) 43 3 ⁄ 8" (1102) (1102) (1086) (1073) (1102) (1086) (1073) windows depend on new insert Reverse Cottage Sill Angle Cottage Reverse Cottage 0° 8°0° 14°8° Sill Angle 14° Cottage Cottage Reverse Cottage Reverse Cottage 0° Sill Angle 8° Cottage 14° Sill Angle 0° 8° 14°
Picture
(1969)
CUSTOM HEIGHTS CUSTOM HEIGHTS
(1962)
CUSTOM HEIGHTS
(1975)
CUSTOM HEIGHTS
(2302)
CUSTOM HEIGHTS CUSTOM HEIGHTS
981)
(2315)
to to to to to to to toto 3 ⁄43"⁄ 8"3535 3 ⁄ 83" ⁄4" 35 3 ⁄ 8" 3536 (908) (924) (908) 3 3⁄ 8⁄ "8"(899) 35 35 3 ⁄4" (899) 35 3 ⁄ 8" 36 (924) (908) (899) (899) 8° 0° 14° 8°Sill Angle 14° Sill Angle 14° 0° Sill Angle 8° 14° Sill Angle
CUSTOM HEIGHTS
0°
78"
(2330) (2302)
1 ⁄4"7 ⁄ 8" 21 1 ⁄4" 2144 44 7 ⁄ 8" to 1 to 7 ⁄ 8" (1140) (1140) ⁄4" 21 1 ⁄4" (540) 44 7 ⁄ 821 "(540) 44 to to (540) (1140)(540) (1140) 0° 8°0° 14°8° 14° CUSTOM WIDTHS CUSTOM WIDTHS 0° 8° 14° 0° 8° 14° WIDTHS CUSTOM WIDTHS 1 ⁄4"3 ⁄476 3 ⁄4"1 ⁄4" 76CUSTOM 3 ⁄4" Available in 1 ⁄ 8" (3) increments 77 3 ⁄4" 77 77 " 77 (1962) (1949) 3 ⁄43" ⁄4"(1949) 1 ⁄4" 76 3 ⁄4" 77 1 ⁄4" (1962) 76(1975) 77 77 77 3 ⁄4" (1975)
CUSTOM HEIGHTS CUSTOM HEIGHTS
to to to 36 3 ⁄ 8" 35 3 ⁄4" 6 3 ⁄ 8" (924) 24) (908) 0° 0° 8°
CUSTOM HEIGHTS
(2315)
CUSTOM HEIGHTS
330)
CUSTOM HEIGHTS
1 ⁄47" ⁄ 8" 21 1 ⁄4" 2144 44 7 ⁄ 8" to 1 to 7 ⁄ 8" (1140) (1140) ⁄4" 21 1 ⁄4" (540)44 7 ⁄ 821 "(540) 44 to to (540) (1140)(540) (1140) CUSTOM WIDTHS CUSTOM WIDTHS 0° 8°0° 14°8° 14° CUSTOM WIDTHS CUSTOM WIDTHS 0° 8° 14° 0° 8° 14° 1 ⁄ 83"⁄4"9091 5 ⁄ 81" ⁄ 8" 90 5 ⁄ 8" 91 3 ⁄4" 9191 (2330) (2315) 5 3⁄ 8⁄"4"(2302) 1 ⁄ 8" (2302) 91 1 ⁄ 8" (2315) 90 91 90 5 ⁄ 8" 1 3 ⁄4" (2330) 91
(292)
For picture and transom insert windows, either height or width must be 68" (1727) or less and height plus width cannot be less than 28" (711). Measurement guide for custom sized windows can be found at andersenwindows.com/measure. Grille patterns shown on page 100.
Tilt-Wash Double-Hung Insert Window Specification Formulas Vent Opening
Width
= window width − 3.798" (96)
Height
= Depends on sash ratio and specific sill angle of insert window, see below. sash ratio
Unobstr. Glass
clear opening height
14°
sill angle deduction 8°
0°
1:1 Equal
= (window height ÷ 2) − sill angle deduction
3.602" (91)
3.836" (97)
4.138" (105)
2:3 Cottage
= (window height x 2) ÷ 5 − sill angle deduction
2.879" (73)
3.066" (78)
3.308" (84)
3:2 Reverse Cottage
= (window height x 2) ÷ 5 − sill angle deduction
2.083" (53)
2.270" (58)
2.512" (64)
Width
= window width − 6.219" (158)
Height
= Depends on sash ratio and specific sill angle of insert window, see below. sash
14°
8°
0°
Equal - Upper and Lower Sash
= (window height ÷ 2) − sill angle deduction
3.625 (92)
3.844" (98)
4.156" (106)
= (window height x 2) ÷ 5 − sill angle deduction
2.891" (73)
3.078" (78)
3.328" (85)
Cottage - Lower Sash or Reverse Cottage - Upper Sash
= (window height x 2) ÷ 5 − sill angle deduction
4.344" (110)
4.625" (117)
4.984" (127)
Picture Insert
Transom Insert
Width
= window width − 6.0" (152)
Width
Height
= Depends on sash ratio and specific sill angle of insert window, see below.
Height =
= window height − sill angle deduction
14°
sill angle deductions
5.816" (148)
8°
0°
6.285" (160)
6.890" (175)
= window width − 6.0" (152) window width − 6.0" (152)
• Dimensions in parentheses are in millimeters. • Clear Opening formulas provide dimensions for determining area available for egress. Vent Opening formulas provide dimensions for determining area available for passage of air. Unobstr. Glass (unobstructed glass) formulas provide dimensions for determining area available for passage of light. • Refer to andersenwindows.com/measure for detailed instructions on how to properly measure for insert windows.
98
For clear opening Andersen supplier.
sill angle deduction
unobstructed glass height
Cottage - Upper Sash or Reverse Cottage - Lower Sash
unobstructed glass height
height by 7 ⁄ 32" (6).
specifications, contact your
Tilt-Wash Picture and Transom Insert Window Specifications Unobstr. Glass
Optional Estate™ hardware will reduce vent opening
Existing Window Measurements Existing Double-Hung Window
Required measurements:
Existing Picture Window
1. Existing Opening Height 2. Existing Sill Angle 3. Existing Opening Width
Existing Exterior Stop Side
Existing Parting Stop (typically removed) Existing Inside Stop
Sto Side p Jamb
Stop
Jamb
ing
Cas
View of Side Jamb 1. Existing Opening Height
ing
Cas
Interior
Interior
View of Side Jamb
Head Jamb
Existing Stool
Head Jamb
View of Head Jamb
View of Head Jamb
Existing Interior Trim Head Jamb Stop
Existing Sill
2. Existing Sill Angle
Interior
Head Jamb Stop
Vertical Section Interior
Jamb
Tape Measure
Existing Interior Trim Existing Inside Stop 3. Existing Opening Width Existing Parting Stop (typically removed) Existing Exterior Stop Existing Exterior Trim
Stool Sill
Stool Sill
Interior
Interior
View of Sill
Horizontal Section
View of Sill Stool
Stool
Sill Angle Details
Scale 3" (76) = 1'-0" (305) — 1:4 Select a sill angle that most closely matches your existing sill angle.
Existing Window Sill 11° to 15° Angle
Existing Opening Height
Existing Window Sill 5° to 10° Angle
Existing Opening Height
Existing Window Sill 0° to 4° Angle
Existing Opening Height
Windows with a smaller sill angle will have a larger maximum height.
1 1 ⁄ 16" (27)
5 ⁄ 8"
(16)
Exterior
Interior
0° Sill Detail
Existing Wall
8° Sill Detail
Existing Wall
14° Sill Detail
• Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters. • Refer to andersenwindows.com/measure for detailed instructions on how to properly measure for insert windows.
99
400 Series Tilt-Wash Double-Hung Insert Windows
Existing Wall
TILT-WASH DOUBLE-HUNG INSERT WINDOWS Grille Patterns Prairie A
Specified Equal Light
Prairie A
Double-hung window patterns are also available in Upper Sash
Specified Equal Light
Only (USO) configurations. For picture window patterns that require alignment with double-hung patterns, identify the sash style
Tilt-Wash Transom Insert
Tilt-Wash Double-Hung Insert
Equal Sash
Cottage Sash
Equal Sash
Cottage Sash
(equal, cottage, reverse cottage) when ordering. Number of lights and overall pattern varies with window size. Patterns are not available in all configurations. For more information on divided
Tilt-Wash Picture Insert
light see page 11 or visit andersenwindows.com/grilles.
Tilt-Wash Double-Hung Insert Window Details
gle Options: °, 0°
3 1 ⁄ 4"
Check Rail Sill Angle Options: 14°, 8°, 0°
Jamb
Clear Opg. Width
3 ⁄ 16"
Unit Width
(83)
(5) Min.*
Jamb
Andersen® Exterior Trim Stop Cover
Clear Opening Height
Existing Opening Height
Interior Trim Strip
3 1 ⁄ 4" (83)
(6) Min.*
Andersen® Tilt-Wash Double-Hung Insert Window
Head
Andersen® Tilt-Wash Double-Hung Insert Window
1 ⁄4"
Andersen Exterior Trim Stop Cover
Existing Opening Height
Clear Opening Height
Existing Parting Stop Removed
®
1 ⁄4"
Unit Height
Andersen® Tilt-Wash Double-Hung Insert Window
Jamb Exterior Trim Strip
14°
(5) Min.*
(5) Min.* Sill
(6) Min.*
Existing Parting StopHorizontal Section Removed 1 ⁄4"
Vertical Section
Joining CombinationsAndersen® Head
1-way combinations horizontally or vertically. Do notCheck join Rail insert windows in 2-way combinations.
Clear Opening Height Double-Hung Insert
Existing Opening Height
Join insert windows in
Vertical (ribbon) Joining Detail
Tilt-Wash Double-Hung Transom Insert Window Insert
14°
Sill Double-Hung Double-Hung Insert Insert
Andersen® Tilt-Wash Double-Hung Insert Window
Transom Insert
Jamb
Clear Opg. Width
3 ⁄ 16"
Unit Width
(5) Min.*
Double-Hung Insert
Picture Insert
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 Interior Trim Strip
3 1 ⁄ 4" (83)
Picture Insert
Double-Hung Insert
Existing Opening Width
Picture Insert
Picture Insert
Jamb 3 ⁄ 16"
(5) Min.*
Andersen® Exterior Exterior Trim Strip Trim Stop Cover Horizontal Section Tilt-Wash Double-Hung Insert to Tilt-Wash Double-Hung Insert
For more joining information see the combination designs section starting on page 255.
• Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters. *Refer to andersenwindows.com/measure for detailed instructions on how to properly measure for insert windows.
100
Cle
3 ⁄ 16"
3 ⁄ 16"
Existing Opening Width
Unit Height
en® r op
(38) = 1'-0" (305) — 1:8
(6) Min.*
Existing Parting Stop Removed
3 1 ⁄ 4" (83)
Unit Height
Scale
11 ⁄ 2"
Existin
400 Series Bay & Bow Windows
BAY & BOW WINDOWS CUSTOM SIZING in 1â &#x201E;8" (3) increments for select products
SECTION REFERENCE Casement Tables of Sizes ................. 104-105 Window Details ................ 106-107
Custom Casement Tables of Sizes ................. 108-109
Double-Hung Tables of Sizes ..................110-113 Window Details ........................114 Dimensions in parentheses are in millimeters.
BAY & BOW WINDOWS FEATURES Casement Bay & Bow Windows
Woodwright & Tilt-Wash Double-Hung Bay Windows
Some options must be specified to complete an order. These include color, glass and hardware.
Some options must be specified to complete an order. These include color and glass.
A Pre-milled mullion posts join individual
units together into 30° angle bay and 45° angle bay window units for a sturdy, easy-to-install unit. The exterior is sheathed with vinyl cladding; the interior is trimmed in natural wood, which can be finished to enhance any décor.
®
casement windows together into 30° angle bay, 45° angle bay, 90° box bay and 10° bow window units. Mullion posts lock into a channel in each adjoining casement window for a sturdy, easy-to-install unit. The exterior is sheathed with vinyl cladding; the interior is trimmed in natural wood, which can be finished to enhance any décor.
B Andersen® auxiliary casing is supplied as trim to finish the top of 30° angle bay, 45° angle bay and 10° bow windows. Auxiliary casing is an option for 90° box bay windows.
C Platforms made of 3/4" (19) plywood at the head and sill of bay and bow windows provide added strength to the assembly.
D Pre-milled mullion posts join individual
30° Casement Angle Bay Window
C B
A
E Andersen auxiliary casing is mitered, joined and installed as trim to finish the top of 30° and 45° angle bay windows. Cellular Fibrex® is covered in vinyl cladding.
F Platforms made of 3/4" (19) plywood at the head and sill of bay and bow windows provide added strength to the assembly. 45° Double-Hung Angle Bay Window
F
E CUSTOM SIZES
D
10° Casement Bow Window
90° Casement Box Bay Window
C C B
A A
Dimensions in parentheses are in millimeters. Installation of custom bay units having a projection greater than 24" (610) requires the expertise of a structural engineer to determine needed structural support. Failure to use sufficient structural support could result in personal injury or damage to windows or other property. Each cable within the system can support a maximum load of 500 lbs. or 227 kg. If the section of the window unit requiring support exceeds 500 lbs. or 227 kg., additional support is needed.
102
B
400 Series Bay & Bow Windows
OPTIONS Please refer to the individual 400 Series product selections for a full list of options and accessories. Frame
Installation
Casement
Double-Hung
Extension Jambs
Extension Jambs
90°
Cable Support CAUTION:
45° 30°
45°
30°
10°
Jamb depth is 2 7/8" (73). Pine extension jambs are available in 1⁄16" (1.5) increments between 4 9⁄16" (116) and 7 1⁄8" (181).
Jamb depth is 4 1/2" (114). Pine extension jambs are available in 1⁄16" (1.5) increments between 5 1⁄16" (129) and 7 1⁄8" (181). Head and Seat Boards
Head and Seat Boards 30° 30°
45°
90°
10°
Head and seat boards are available in pine, oak, maple and prefinished White. Available in 1⁄16" (1.5) increments between 4 9⁄16" (116) and 7 1⁄8" (181). Some sizes may be veneered.
45°
Head and seat boards are available in pine, oak, maple and prefinished White. Available in 1⁄16" (1.5) increments between 4 9⁄16" (116) and 7 1⁄8" (181). Some sizes may be veneered.
A cable provides additional support. Recommended for installations that extend out from the structure, without a framed support wall beneath the unit. Each cable within the system can support a maximum load of 500 lbs. or 227 kg. If the section of the window unit requiring support exceeds 500 lbs. or 227 kg., additional support is necessary. Failure to use sufficient structural support could result in personal injury or damage to windows or other property.
• Painting and staining may cause damage to rigid vinyl. • 400 Series windows in Terratone color may be painted any color lighter than Terratone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Terratone any color darker than Terratone. • Do not paint 400 Series windows with White, Canvas, Sandtone, Forest Green, Dark Bronze or Black exterior colors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
Proper support of projecting bow and bay windows is required, see installation instructions. Failure to do so may result in injury, product or property damage.
For more information about glass, patterned glass, art glass, grilles and TruScene® insect screen see pages 10-17. For more information about installation accessories and warranty see pages 288-291 or visit
andersenwindows.com
Dimensions in parentheses are in millimeters.
103
BAY & BOW WINDOWS Table of Casement 30° Angle Bay Windows 13 3 ⁄ 4" (349)
13 3 ⁄ 4" (349)
Window Dimension
5'-10" (1778)
7'-9 7 ⁄ 8" (2384)
7'-9 7 ⁄ 8" (2384)
9'-9 3 ⁄4" (2991)
9'-9 3 ⁄4" (2991)
Minimum Rough Opening
5'-9 1 ⁄ 8" (1756)
7'-9" (2362)
7'-9" (2362)
9'-8 7 ⁄ 8" (2969)
9'-8 7 ⁄ 8" (2969)
30-C13-20
30-C23-20
30-P4030-20
30-C33-20
30-P6030-20
30-C135-20
30-C235-20
30-P4035-20
30-C335-20
30-P6035-20
30-C14-20
30-C24-20
30-P4040-20
30-C34-20
30-P6040-20
30-C145-20
30-C245-20
30-P4045-20
30-C345-20
30-P6045-20
30-C15-20
30-C25-20
30-P4050-20
30-C35-20
30-P6050-20
30-C155-20
30-C255-20
30-P4055-20
30-C16-20
30-C26-20
30-P4060-20
Projection
13 3 ⁄ 4" (349)
13 3 ⁄ 4" (349)
13 3 ⁄ 4" (349)
HEIGHTS
WIDTHS
3'-1 7 ⁄ 16" 3'-2" 3'-6 5 ⁄ 16" 3'-6 7 ⁄ 8" 4'-1 1 ⁄ 2" 4'-2" 4'-6 5 ⁄ 16" 4'-6 7 ⁄ 8" 5'-1 3 ⁄ 8" 5'-1 7 ⁄ 8" 5'-6 5 ⁄ 16" 5'-6 7 ⁄ 8" 6'-1 3 ⁄ 8" 6'-1 7 ⁄ 8"
(951) (965) (1075) (1089) (1257) (1270) (1380) (1394) (1559) (1572) (1684) (1699) (1864) (1876)
Table of Casement 45° Angle Bay Windows Projection
19 3 ⁄ 16" (487)
19 3 ⁄ 16" (487)
19 3 ⁄ 16" (487)
19 3 ⁄ 16" (487)
19 3 ⁄ 16" (487)
HEIGHTS
WIDTHS
Window Dimension
5'-4 1 ⁄ 8" (1629)
7'-3 7 ⁄ 8" (2232)
7'-3 7 ⁄ 8" (2232)
9'-3 3 ⁄ 4" (2838)
9'-3 3 ⁄ 4" (2838)
Minimum Rough Opening
5'-2 5 ⁄ 8" (1591)
7'-2 1 ⁄ 2" (2197)
7'-2 1 ⁄ 2" (2197)
9'-2 3 ⁄ 8" (2804)
9'-2 3 ⁄ 8" (2804)
45-C13-20
45-C23-20
45-P4030-20
45-C33-20
45-P6030-20
45-C135-20
45-C235-20
45-P4035-20
45-C335-20
45-P6035-20
45-C14-20
45-C24-20
45-P4040-20
45-C34-20
45-P6040-20
45-C145-20
45-C245-20
45-P4045-20
45-C345-20
45-P6045-20
45-C15-20
45-C25-20
45-P4050-20
45-C35-20
45-P6050-20
45-C155-20
45-C255-20
45-P4055-20
45-C16-20
45-C26-20
45-P4060-20
3'-1 7 ⁄ 16" 3'-2" 3'-6 5 ⁄ 16" 3'-6 7 ⁄ 8" 4'-1 1 ⁄ 2" 4'-2" 4'-6 5 ⁄ 16" 4'-6 7 ⁄ 8" 5'-1 3 ⁄ 8" 5'-1 7 ⁄ 8" 5'-6 5 ⁄ 16" 5'-6 7 ⁄ 8" 6'-1 3 ⁄ 8" 6'-1 7 ⁄ 8"
(951) (965) (1075) (1089) (1257) (1270) (1380) (1394) (1559) (1572) (1684) (1699) (1864) (1876)
Custom-size windows are available in 1 ⁄ 8" (3) increments. See pages 108-109 for more information.
Proper support of projecting bow and bay windows is required, see installation instructions. Failure to do so may result in injury, product or property damage.
In addition to venting shown in tables, other standard configurations are available. Choose left venting, right venting or stationary as viewed from the exterior.
• "Projection" refers to outside of the exterior sheathing to the outer edge of the window. • "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • One Andersen cable kit is included with the unit for proper installation. Each cable supports a maximum load of 500 lbs. or 227 kg; additional support is necessary for loads exceeding 500 lbs. or 227 kg. • Angle bay and bow windows include only the basic unit. Roof and other installation materials provided by other manufacturers. • For walkout angle bay and bow window details and installation guidelines, contact your Andersen supplier or visit our website at andersenwindows.com/adf. • Dimensions in parentheses are in millimeters.
104
15 ⁄ 16 22 15 16" (583)
15 ⁄ 16 22 15 16" (583)
15 ⁄ 16 22 15 16" (583)
15 ⁄ 16 22 15 16" (583)
Window Dimension
4'-8 11 ⁄ 44" (1429)
4'-8 11 ⁄ 44" (1429)
6'-8 11 ⁄ 88" (2035)
6'-8 11 ⁄ 88" (2035)
Minimum Rough Opening
4'-1 55 ⁄ 88" (1260)
4'-1 55 ⁄ 88" (1260)
6'-1 11 ⁄ 22" (1867)
6'-1 11 ⁄ 22" (1867)
90-C23-15
90-P4030-15
90-C33-15
90-P6030-15
90-C235-15
90-P4035-15
90-C335-15
90-P6035-15
90-C24-15
90-P4040-15
90-C34-15
90-P6040-15
90-C245-15
90-P4045-15
90-C345-15
90-P6045-15
90-C25-15
90-P4050-15
90-C35-15
90-P6050-15
90-C255-15
90-P4055-15
90-C26-15
90-P4060-15
Projection
400 Series Bay & Bow Windows
Table of Casement 90° Box Bay Windows
HEIGHTS HEIGHTS
WIDTHS
3'-1 77 ⁄ 16 16" 3'-2" 16" 3'-6 55 ⁄ 16 3'-6 77 ⁄ 88" 4'-1 11 ⁄ 22" 4'-2" 16" 4'-6 55 ⁄ 16 4'-6 77 ⁄ 88" 5'-1 33 ⁄ 88" 5'-1 77 ⁄ 88" 16" 5'-6 55 ⁄ 16 5'-6 77 ⁄ 88" 6'-1 33 ⁄ 88" 6'-1 77 ⁄ 88"
(951) (965) (1075) (1089) (1257) (1270) (1380) (1394) (1559) (1572) (1684) (1699) (1864) (1876)
Custom-size windows are available in 1 ⁄ 8" (3) increments. See pages 108-109 for more information. In addition to venting shown in tables, other standard configurations are available. Choose left venting, right venting or stationary as viewed from the exterior.
Table of Casement 10° Bow Windows Projection
5 99 ⁄ 16 16" (141)
13 ⁄ 16 9 13 16" (249)
14" (356)
20 55 ⁄ 16 16" (516)
26 33 ⁄ 88" (670)
HEIGHTS HEIGHTS
WIDTHS
Window Dimension
6'-1 99 ⁄ 16 16" (1868)
8'-1 99 ⁄ 16 16" (2478)
10'-0 33 ⁄ 44" (3067)
11'-11 11 ⁄ 16 16" (3634)
13'-8 55 ⁄ 16 16" (4174)
Minimum Rough Opening
6'-1 55 ⁄ 88" (1862)
8'-1 33 ⁄ 88" (2473)
10'-0 33 ⁄ 88" (3058)
11'-10 11 ⁄ 22" (3620)
13'-7 11 ⁄ 22" (4153)
C33 BOW
C43 BOW
C53 BOW
C63 BOW
C73 BOW
C335 BOW
C435 BOW
C535 BOW
C635 BOW
C735 BOW
C34 BOW
C44 BOW
C54 BOW
C64 BOW
C74 BOW
C345 BOW
C445 BOW
C545 BOW
C645 BOW
C745 BOW
C35 BOW
C45 BOW
C55 BOW
C65 BOW
C75 BOW
C355 BOW
C455 BOW
C555 BOW
C655 BOW
C755 BOW
C36 BOW
C46 BOW
C56 BOW
C66 BOW
C76 BOW
3'-1 77 ⁄ 16 16" 3'-2" 3'-6 55 ⁄ 16 16" 3'-6 77 ⁄ 88" 4'-1 11 ⁄ 22" 4'-2" 4'-6 55 ⁄ 16 16" 4'-6 77 ⁄ 88" 5'-1 33 ⁄ 88" 5'-1 77 ⁄ 88" 16" 5'-6 55 ⁄ 16 5'-6 77 ⁄ 88" 6'-1 33 ⁄ 88" 6'-1 77 ⁄ 88"
(951) (965) (1075) (1089) (1257) (1270) (1380) (1394) (1559) (1572) (1684) (1699) (1864) (1876)
Proper support of projecting bow and bay windows is required, see installation instructions. Failure to do so may result in injury, product or property damage.
• "Projection" refers to outside of the exterior sheathing to the outer edge of the window. • "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • One Andersen cable kit is included with the unit for proper installation. Each cable supports a maximum load of 500 lbs. or 227 kg; additional support is necessary for loads exceeding 500 lbs. or 227 kg. • Angle bay and bow windows include only the basic unit. Roof and other installation materials provided by other manufacturers. • For walkout angle bay and bow window details and installation guidelines, contact your Andersen supplier or visit our website at andersenwindows.com/adf. • Dimensions in parentheses are in millimeters.
105
BAY & BOW WINDOWS Casement 30° Angle Bay Window Detail Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
OverallUnit UnitDimension DimensionWidth Width Overall OverallUnit UnitDimension DimensionWidth Width Overall
Overall OverallRough RoughOpening OpeningWidth Width
Overall OverallRough RoughOpening OpeningWidth Width
Jamb Jamb
Jamb Jamb AndersenSide Side Andersen ExtensionJambs Jambs Extension Andersen Andersen®®® Mullion MullionPost Post InteriorTrim Trim Interior
Back Back of of Back of Flange Flange Flange
Projection Projection Projection
ExtensionJambs Jambs Extension Others bybyOthers
11555⁄ 16 16 ⁄ 16"" (33) (33)
Modifiedtrim trimoption option Modified with withcenter centerpicture pictureunit unitinin 22xx66wood woodframe framewall wall
Center CenterPicture PictureUnit Unit
Andersen AndersenMullion MullionPost Post withVinyl VinylExterior ExteriorTrim Trim with
iddthth WWi oonn nensisi e mim ititDDi UUnn
Angled AngledSide Side Flange Flange
Centeroperating operatingunit unitinin Center 22xx44wood woodframe framewall wall
Horizontal Section
Casement 45°Angle Bay Window Detail Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
OverallUnit UnitDimension DimensionWidth Width Overall OverallRough RoughOpening OpeningWidth Width Overall
OverallUnit UnitDimension DimensionWidth Width Overall
Jamb Jamb
OverallRough RoughOpening OpeningWidth Width Overall ExtensionJambs Jambs Extension Others bybyOthers
Jamb Jamb Andersen AndersenSide Side Extension ExtensionJambs Jambs Andersen Andersen Adaptor Adaptor Side Side Flange Flange UUUnn niitittD DDiimim meeenn nsssioio ionnn WWW iididdt tthhh
Projection Projection Projection Back Back of of Flange Flange Back of Flange
Andersen Andersen MullionPost Post Mullion InteriorTrim Trim Interior
16 ⁄ 16"" 11555⁄ 16 (33) (33)
Modifiedtrim trimoption option Modified withcenter centerpicture pictureunit unitinin with 22xx66wood frame wood framewall wall
CenterPicture PictureUnit Unit Center
Andersen AndersenMullion MullionPost Post with withVinyl VinylExterior ExteriorTrim Trim
Centeroperating operatingunit unitinin Center woodframe framewall wall 22xx44wood
Horizontal Section
Casement 10° Bow Window Detail Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 Jamb Jamb
Overall OverallUnit UnitDimension DimensionWidth Width Overall OverallRough RoughOpening OpeningWidth Width
Projection Projection Projection
Mullion MullionPost Post Interior InteriorCasing Casing
Jamb Jamb InteriorTrim Trim Interior by byOthers Others
idthth im. .WWid DDim UUnnitit ° ° ° ° 55 55
Horizontal Section • Light-colored areas are parts included with window. Dark-colored areas are additional Andersen parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to unit installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters. ®
106
Scale 11 ⁄ 2" (38) = 1'-0" (305) —Overall 1:8 Unit Dimension Width
Jamb Jamb Jamb
Overall Unit Dimension Width Overall OverallUnit UnitDimension DimensionWidth Width Overall Rough Opening Width Overall OverallRough RoughOpening OpeningWidth Width
Andersen® Side ® Extension ® Andersen Side Andersen SideJambs Extension ExtensionJambs Jambs Trim by others Trim Trimbybyothers others
Andersen® Side ® Extension ® Andersen Side Andersen SideJambs Extension ExtensionJambs Jambs Trim by others Trim Trimbybyothers others
Andersen Wall Return Post Andersen Wall Andersen Wall Return ReturnPost Post Andersen Mullion Post Andersen Andersen Interior Mullion Post Mullion PostTrim Interior InteriorTrim Trim
Andersen Wall Return Post Andersen Wall Andersen Wall Return ReturnPost Post Andersen Mullion Post Andersen Andersen Interior Mullion Post Mullion PostTrim Interior InteriorTrim Trim
Andersen Mullion Post Andersen Andersen with Vinyl Mullion Post Mullion Post Exterior with withVinyl Vinyl Trim Exterior ExteriorTrim Trim Horizontal Section center venting window
3 3 ⁄ 16" "(81) 3 33 ⁄ 16 3 ⁄ 16 " (81) (81)
Jamb Jamb Jamb
1 13 ⁄ 16" (46) ⁄ 16⁄ 16 1 11313 " (46) " (46) Unit Dimension Width Unit Dimension Width Unit Dimension Width
Jamb Jamb Jamb
Overall OverallUnit UnitDimension DimensionWidth Width Overall Rough Opening Width Overall Rough Opening Width Overall Rough Opening Width
400 Series Bay & Bow Windows
Casement 90° Box Bay Window Details
4 3 ⁄ 16" Unit Dim. 4 43 ⁄ 16 "(106) Unit 3 ⁄ 16 " UnitDim. Dim. (106) Horizontal Section (106) center picture window
Andersen Mullion Post Andersen Andersen with Vinyl Mullion Post Mullion Post Exterior with withVinyl Vinyl Trim Exterior ExteriorTrim Trim
Casement 30° & 45°Angle Bay, 10° Bow & 90° Box Bay Window Detail Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Andersen® Cable Support System ® ® Andersen AndersenCable CableSupport SupportSystem System Trim by others Trim Trimby byothers othersCasing Auxiliary Auxiliary AuxiliaryCasing Casing
1 1 ⁄ 4" (32) 1 11 ⁄ 41"⁄ 4(32) " (32)
(19)
Overall Unit Dimension Height Overall Unit Dimension Height Overall Unit Dimension Height Basic Casement Unit Height Basic Casement Unit Height Basic Casement Unit Height
3 ⁄ 43" (19) ⁄ 4" (19)
7 ⁄ 16" 7 ⁄ 16 " "(11) 7 ⁄ 16
(11) (11) Head Head Head
7 ⁄ 16" 7 ⁄ 16 " "(11) 7 ⁄ 16
(11) (11)
3 ⁄ 4" (19) 3 ⁄ 43" (19) ⁄ 4" (19)
Trim by others Trim Trimbybyothers others 1 5 ⁄ 16"
(33) 1 15 ⁄ 16 " (33) 5 ⁄ 16 " (33)
Rough Opening Height Rough Opening Height Rough Opening Height
3 ⁄ 4"
3 ⁄ 4" (19) 3 ⁄ 43" (19) ⁄ 4" (19)
Sill Sill Sill
Back of Flange Back Backof ofFlange Flange Projection Projection Projection
Vinyl Laminated Trim Board Vinyl VinylLaminated Laminated Trim Board Trim Board
Vertical Section • Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to unit installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
107
BAY & BOW WINDOWS
Custom sized in 1 ⁄ 8" (3) increments
In addition to venting shown in tables, other standard configurations are available.
between minimum and maximum width
Choose left venting, right venting or stationary as viewed from the exterior.
and height dimensions.
Measurement guide can be found at andersenwindows.com/measure.
Custom Casement 30° Angle Bay Window Size and Projection Range Sash Ratio Window Configuration
1:1:1
Center Window Venting Configuration
1
1
1:2:1
1
1
1:2:1 2
1
1
1
1:3:11
2
1
1:3:1
67 /8" (1711)
137 /2" (3493)
3
Venting or Stationary
1
3
X
3
1
1
1
1
1
Projection Maximum Height Inches/(mm)
26 1/8" (664)
3
73 7/8" (1876)
1
Minimum Inches/(mm)
Maximum Inches/(mm)
10 1/4" (260)
19 5/8" (498)
X
26 /8" 1 (664)
73 7/8" (1876)
10 1/4" (260)
19 5/8" (498)
X
38" (965)
73 7/8" (1876)
10 3/4" (273)
16 5/8" (422)
1
3
70 7/8" (1800)
115 1/4" (2927)
11531/4" (2927)
137 5/8" (3496)
X
38" (965)
61 7/8" (1571)
16 5/8" (422)
19 5/8" (498)
84 1/2" (2146)
144" (3658)
X
26 1/8" (664)
73 7/8" (1876)
10 1/4" (260)
16 1/2" (419)
83 7/8" (2130)
97 7/8" (2486)
X
38" (965)
73 7/8" (1876)
10 1/4" (260)
11 5/8" (295)
97 7/8" (2486)
116 7/8" (2969)
X
38" (965)
61 7/8" (1571)
11 5/8" (295)
13 5/8" (346)
1
1
1
1
Picture
1
3
101 1/2" (2578)
1
3
1
1
3
1
Picture
1
1
3
2
50" 1 1 (1270) 3
2
1
2
Venting or Stationary
1
1
1
2
1
2
1
Venting or Stationary
1
1
Window Dimension Maximum Minimum Width Height Inches/(mm) Inches/(mm)
Minimum Width Inches/(mm)
Custom Casement 45° Angle Bay Window Size and Projection Range
1
66" (1676)
1
1
3
2
1
1
1
1:3:1 3
3
Proper support of projecting bow and bay windows is required, see installation instructions. Failure to do so may result in injury, product or property damage.
108
3
73 7/8" (1876)
14 3/16" (360)
27 1/2" (699)
1
26 /8" (664)
73 7/8" (1876)
14 1/4" (362)
27 1/2" (699)
26 1/8" (664)
1
Maximum Inches/(mm)
3
X
38" (965)
73 7/8" (1876)
14 7/8" (378)
23 1/4" (591)
106 3 7/8" (2715)
127 1/4" (3232)
X
38" (965)
61 7/8" (1571)
23 1/4" (591)
27 1/2" (699)
80 1/8" (2035)
144" (3658)
X
26 1/8" (664)
73 7/8" (1876)
14 1/4" (362)
24 5/16" (618)
79 5/8" (2023)
92 3/4" (2356)
X
38" (965)
73 7/8" (1876)
14 3/16" (360)
16 1/4" (413)
92 3/4" (2356)
110 3/8" (2804)
X
38" (965)
61 7/8" (1571)
16 1/4" (413)
19" (483)
1
1
Venting or Stationary
1
1
1:3:1
1
1
1
3
2
3
Minimum Inches/(mm)
106 7/8" (2715)
1
Picture
1
1
1
1:2:1 2
X
Projection Maximum Height Inches/(mm)
1
127 /4" (3232)
1
63" (1600)
X
3
1
1
1
1 1
1
1
3
2
2
91 1/4" (2318)
1
1
1
Venting or Stationary
1
1
1
1:2:1
2
2
45 3/4" (1162)
1
1
Window Dimension Maximum Minimum Width Height Inches/(mm) Inches/(mm)
1
Venting or Stationary
Minimum Width Inches/(mm)
1
1:1:1
1
Center Window Venting Configuration
1
Sash Ratio Window Configuration
Picture
• "Projection" refers to outside of the exterior sheathing to the outer edge of the window. • "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • One Andersen cable kit is included with the unit for proper installation. Each cable supports a maximum load of 500 lbs. or 227 kg; additional support is necessary for loads exceeding 500 lbs. or 227 kg. • Angle bay and bow windows include only the basic unit. Roof and other installation materials provided by other manufacturers. • For walkout angle bay and bow window details and installation guidelines, contact your Andersen supplier or visit our website at andersenwindows.com/adf. • Refer to andersenwindows.com/measure for detailed instructions on how to properly measure for custom-size windows. • Dimensions in parentheses are in millimeters.
In addition to venting shown in tables, other standard configurations are available.
between minimum and maximum width
Choose left venting, right venting or stationary as viewed from the exterior.
and height dimensions.
Measurement guide can be found at andersenwindows.com/measure.
400 Series Bay & Bow Windows
Custom sized in 1 ⁄ 8" (3) increments
Custom Casement 90° Box Bay Window Size and Projection Range Window Configuration
Center Window Venting Configuration
Minimum Width Inches/(mm)
Window Dimension Maximum Minimum Width Height Inches/(mm) Inches/(mm)
Maximum Height Inches/(mm)
Flanker Minimum Maximum Width Width Inches/(mm) Inches/(mm)
Projection Minimum Maximum Depth Depth Inches/(mm) Inches/(mm)
Picture
38 1/4" (972)
61 7/8" (1572)
X
38" (965)
73 7/8" (1876)
17" (432)
35 7/8" (911)
21 1/2" (546)
40 3/8" (1026)
Picture
61 7/8" (1572)
74 1/8" (1883)
X
38" (965)
61 7/8" (1572)
17" (432)
35 7/8" (911)
21 1/2" (546)
40 3/8" (1026)
Venting or Stationary
36 3/8" (924)
74 1/4" (1886)
X
26 1/8" (664)
73 7/8" (1876)
17" (432)
35 7/8" (911)
21 1/2" (546)
40 3/8" (1026)
Venting or Stationary
53 1/2" (1359)
110 3/8" (2804)
X
26 1/8" (664)
73 7/8" (1876)
17" (432)
35 7/8" (911)
21 1/2" (546)
40 3/8" (1026)
Custom Casement 10° Bow Window Size and Projection Range Window Configuration
Center Window Venting Configuration
Minimum Width Inches/(mm)
Window Dimension Maximum Minimum Width Height Inches/(mm) Inches/(mm)
Maximum Height Inches/(mm)
Projection Minimum Maximum Depth Depth Inches/(mm) Inches/(mm)
3-Wide
Venting or Stationary
52 1/2" (1334)
108 7/8" (2765)
X
26 1/8" (664)
73 7/8" (1876)
4 3/8" (111)
7 5/8" (194)
4-Wide
Venting or Stationary
69 1/2" (1765)
143 7/8" (3654)
X
26 1/8" (664)
73 7/8" (1876)
7 3/8" (187)
13 7/8" (352)
5-Wide
Venting or Stationary
85 7/8" (2181)
164 1/4" (4172)
X
26 1/8" (664)
73 7/8" (1876)
10 3/8" (264)
18 5/8" (473)
6-Wide
Venting or Stationary
101 5/8" (2581)
164 1/4" (4172)
X
26 1/8" (664)
73 7/8" (1876)
14 7/8" (378)
23 3/16" (589)
7-Wide
Venting or Stationary
116 5/8" (2962)
164 1/4" (4172)
X
26 1/8" (664)
73 7/8" (1876)
19 3/16" (487)
26 3/8" (670)
Proper support of projecting bow and bay windows is required, see installation instructions. Failure to do so may result in injury, product or property damage.
• "Projection" refers to outside of the exterior sheathing to the outer edge of the window. • "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • One Andersen cable kit is included with the unit for proper installation. Each cable supports a maximum load of 500 lbs. or 227 kg; additional support is necessary for loads exceeding 500 lbs. or 227 kg. • Angle bay and bow windows include only the basic unit. Roof and other installation materials provided by other manufacturers. • For walkout angle bay and bow window details and installation guidelines, contact your Andersen supplier or visit our website at andersenwindows.com/adf. • Refer to andersenwindows.com/measure for detailed instructions on how to properly measure for custom-size windows. • Dimensions in parentheses are in millimeters.
109
BAY & BOW WINDOWS Table of Double-Hung 30° Angle Bay Window3 Sizes with Picture Window and 1-83 Flanking Windows 3 3 3 Projection Projection
12 ⁄ 4" (324) 12 3 ⁄ 4" (324)
12 ⁄ 4" (324) 12 3 ⁄ 4" (324)
12 ⁄ 4" (324) 12 3 ⁄ 4" (324)
12 ⁄ 4" (324) 12 3 ⁄ 4" (324)
12 ⁄ 4" (324) 12 3 ⁄ 4" (324)
12 3 ⁄ 4" (324) 12 3 ⁄ 4" (324)
WIDTHS WIDTHS
HEIGHTS HEIGHTS
Window Dimension Window Dimension Minimum Rough Opening Minimum Rough 4'-2 1 ⁄ 4Opening " (1276) 4'-2 13 ⁄ 4" 4'-2 4'-6 31 ⁄ 4" 4'-6 13 ⁄ 4" 4'-6 4'-103 ⁄14"⁄ 4" 4'-10 13 ⁄ 4" 4'-10 5'-6 1 3⁄ 4⁄"4" 5'-6 13 ⁄ 4" 5'-6 5'-103 ⁄14"⁄ 4" 5'-10 13 ⁄ 4" 5'-10 6'-6 1 3⁄ 4⁄"4" 6'-6 13 ⁄ 4" 6'-6 3 ⁄ 4"
(1276) (1289) (1289) (1378) (1378) (1391) (1391) (1480) (1480) (1492) (1492) (1683) (1683) (1695) (1695) (1784) (1784) (1797) (1797) (1988) (1988) (2000) (2000)
6'-8 15 ⁄ 16" 15 ⁄ 16" 6'-8 (2056) (2056) 1 ⁄ 8" 6'-8
7'-0 15 ⁄ 16" 15 ⁄ 16" 7'-0 (2157) (2157) 7'-0 1 ⁄ 8"
7'-6 5 ⁄ 8" 5 ⁄ 8" 7'-6 (2302) (2302) 7'-5 3 ⁄ 4"
7'-10 5 ⁄ 8" 5 ⁄ 8" 7'-10 (2403) (2403) 3 ⁄ 4" 7'-9
8'-6 5 ⁄ 8" 5 ⁄ 8" 8'-6 (2607) (2607) 8'-5 3 ⁄ 4"
9'-2 5 ⁄ 8" 5 ⁄ 8" 9'-2 (2810) (2810) 3 9'-1 ⁄ 4"
1 ⁄ 8" 6'-8 (2035) (2035) 30-30310-18 30-30310-18 30-3042-18 30-3042-18 30-3046-18 30-3046-18
1 ⁄ 8" 7'-0 (2137) (2137)
3 ⁄ 4" 7'-5 (2280) (2280) 30-310310-18 30-310310-18 30-31042-18 30-31042-18
3 ⁄ 4" 7'-9 (2381) (2381) 30-42310-18 30-42310-18 30-4242-18 30-4242-18
3 ⁄ 4" 8'-5 (2584) (2584) 30-410310-18 30-410310-18 30-41042-18 30-41042-18
3 ⁄ 4" 9'-1 (2788) (2788)
30-31046-18 30-31046-18 30-31052-18 30-31052-18
30-4246-18 30-4246-18 30-4252-18 30-4252-18
30-41046-18 30-41046-18 30-41052-18 30-41052-18
30-31056-18 30-31056-18 30-31062-18 30-31062-18
30-4256-18 30-4256-18 30-4262-18 30-4262-18
30-3442-18 30-3442-18 30-3446-18 30-3446-18
30-3052-18 30-3052-18
30-5642-18 30-5642-18 30-5646-18 30-5646-18
Table of Double-Hung 30° Angle Bay Window Sizes with Picture Window and 2-0 Flanking Windows Projection Projection
14 3 ⁄ 4" (375) 14 3 ⁄ 4" (375)
14 3 ⁄ 4" (375) 14 3 ⁄ 4" (375)
14 3 ⁄ 4" (375) 14 3 ⁄ 4" (375)
14 3 ⁄ 4" (375) 14 3 ⁄ 4" (375)
14 3 ⁄ 4" (375) 14 3 ⁄ 4" (375)
14 3 ⁄ 4" (375) 14 3 ⁄ 4" (375)
WIDTHS WIDTHS
HEIGHTS HEIGHTS
Window Dimension Window Dimension Minimum Rough Opening Minimum Rough " (1276) 4'-2 1 ⁄ 4Opening 4'-2 13 ⁄ 4" 4'-2 4'-6 31 ⁄ 4" 4'-6 13 ⁄ 4" 4'-6 4'-103 ⁄14"⁄ 4" 4'-10 13 ⁄ 4" 4'-10 5'-6 1 3⁄ 4⁄"4" 5'-6 13 ⁄ 4" 5'-6 5'-103 ⁄14"⁄ 4" 5'-10 13 ⁄ 4" 5'-10 6'-6 1 3⁄ 4⁄"4" 6'-6 13 ⁄ 4" 6'-6 3 ⁄ 4"
(1276) (1289) (1289) (1378) (1378) (1391) (1391) (1480) (1480) (1492) (1492) (1683) (1683) (1695) (1695) (1784) (1784) (1797) (1797) (1988) (1988) (2000) (2000)
7'-3 7 ⁄ 8" 7 ⁄ 8" 7'-3 (2232) (2232) 7'-3" 7'-3" (2210) (2210) 30-30310-20 30-30310-20 30-3042-20 30-3042-20 30-3046-20 30-3046-20 30-3052-20 30-3052-20
7'-7 7 ⁄ 8" 7 ⁄ 8" 7'-7 (2334) (2334) 7'-7"
8'-1 9 ⁄ 16" 9 ⁄ 16" 8'-1 (2478) (2478) 8'-0 3 ⁄ 4"
8'-5 9 ⁄ 16" 9 ⁄ 16" 8'-5 (2580) (2580) 8'-4 3 ⁄ 4"
9'-1 9 ⁄ 16" 9 ⁄ 16" 9'-1 (2783) (2783) 9'-0 3 ⁄ 4"
9'-9 9 ⁄ 16" 9 ⁄ 16" 9'-9 (2986) (2986) 9'-8 3 ⁄ 4"
7'-7" (2311) (2311)
3 ⁄ 4" 8'-0 (2457) (2457) 30-310310-20 30-310310-20 30-31042-20 30-31042-20 30-31046-20 30-31046-20
3 ⁄ 4" 8'-4 (2559) (2559) 30-42310-20 30-42310-20 30-4242-20 30-4242-20 30-4246-20 30-4246-20
3 ⁄ 4" 9'-0 (2762) (2762) 30-410310-20 30-410310-20 30-41042-20 30-41042-20 30-41046-20 30-41046-20
3 ⁄ 4" 9'-8 (2965) (2965)
30-31052-20 30-31052-20
30-4252-20 30-4252-20
30-41052-20 30-41052-20
30-31056-20 30-31056-20
30-4256-20 30-4256-20 30-4262-20 30-4262-20
30-3442-20 30-3442-20 30-3446-20 30-3446-20
30-31062-20 30-31062-20
30-5642-20 30-5642-20 30-5646-20 30-5646-20
Ordering Prefix: Proper support of projecting bow and bay windows is required, see installation instructions. Failure to do so may result in injury, product or property damage.
WDH WPW TW DHP
400 Series Woodwright® Double-Hung Window 400 Series Woodwright® Picture Window 400 Series Tilt-Wash Double-Hung Window 400 Series Tilt-Wash Picture Window
• "Projection" refers to outside of the exterior sheathing to the outer edge of the window. • "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • One Andersen cable kit is included with the unit for proper installation. Each cable supports a maximum load of 500 lbs. or 227 kg; additional support is necessary for loads exceeding 500 lbs. or 227 kg. • Angle bay and bow windows include only the basic unit. Roof and other installation materials provided by other manufacturers. • For walkout angle bay and bow window details and installation guidelines, contact your Andersen supplier or visit our website at andersenwindows.com/adf. • Dimensions in parentheses are in millimeters.
110
Projection Projection
3 ⁄ 4" (324) 12 3 ⁄ 4"12 (324)
3 ⁄ 4" (324) 12 3 ⁄ 4"12 (324)
3 ⁄ 4" (324) 12 3 ⁄ 4"12 (324)
3 ⁄ 4" (324) 12 3 ⁄ 4"12 (324)
3 ⁄ 4" (324) 12 3 ⁄ 4"12 (324)
Projection Projection
3 ⁄ 4" (324) 12 3 ⁄ 4"12 (324)
3 ⁄ 4" (324) 12 3 ⁄ 4"12 (324)
3 ⁄ 4" (324) 12 3 ⁄ 4"12 (324)
3 ⁄ 4" (324) 12 3 ⁄ 4"12 (324)
400 Series Bay & Bow Windows
TableTable of Double-Hung of Double-Hung 30° Angle 30° Angle Bay Window Bay Window SizesSizes with with 1-8 Flanking 1-8 Flanking Double-Hung Double-Hung Windows Windows 3 ⁄ 4" (324) 12 3 ⁄ 4"12 (324)
WIDTHSWIDTHS
⁄ 16" 16" 7'-0 ⁄7'-0 WIDTHS WIDTHS Window Window Dimension Dimension (2157)(2157) 15
7'-0 1 ⁄ 87'-0 " 1 ⁄ 8" Minimum Minimum 15 ⁄7'-0 16(2137) " 15 ⁄ 16" Rough Rough Opening Opening 7'-0 (2137) WindowWindow Dimension Dimension (2157) (2157) 1 1 ⁄ 4" (1276) 4'-2 ⁄ 44'-2 " (1276) 30-34310-18 30-34310-18 3 ⁄ 44'-2 3 ⁄ 4" (1289) 7'-0 1 ⁄ 87'-0 " 1 ⁄ 8" " (1289) 4'-2 Minimum Minimum Rough Rough Opening Opening 1 1 ⁄ 4" (1378) (2137)(2137) " (1378) 4'-6 ⁄ 44'-6 30-3442-18 30-3442-18 13 ⁄ 4" (1276) 4'-2 " (1276) 4'-6 13 ⁄ 44'-2 4'-6 (1391) (1391) 30-34310-18 30-34310-18 3 3 1 1 ⁄ 4⁄"4" (1289) 4'-2 ⁄"4" (1289) 4'-10 ⁄ 44'-2 4'-10 (1480) (1480) 30-3446-18 30-3446-18 1 ⁄34"⁄ 4" (1378) "⁄ 4" (1378) 4'-6 4'-101 ⁄344'-6 4'-10 (1492) (1492) 30-3442-18 30-3442-18 3 3 1 1 4'-6 ⁄ 4" (1391) " (1391) 5'-6 ⁄ 44'-6 5'-6 (1683) (1683) 30-3452-18 30-3452-18 3 ⁄14⁄"4" (1480) ⁄"4" (1480) 4'-10 5'-6 3 ⁄144'-10 5'-6 (1695) (1695) 30-3446-18 30-3446-18 3 3 1 1 4'-10 ⁄ 4" (1492) ⁄ 4" (1492) 5'-10 4'-10 5'-10 (1784) (1784) 30-3456-18 30-3456-18 1 ⁄34"⁄ 4" (1683) "⁄ 4" (1683) 5'-6 5'-101 ⁄345'-6 5'-10 (1797) (1797) 30-3452-18 30-3452-18 3 3 1 ⁄ 4" (1695) 5'-6 " (1695) 6'-6 1 ⁄ 45'-6 6'-6 (1988) (1988) 30-3462-18 30-3462-18 3 ⁄14⁄"4" (1784) ⁄"4" (1784) 5'-10 6'-6 3 ⁄145'-10 6'-6 (2000) (2000) 30-3456-18 30-3456-18 3 3 ⁄ 4" (1797) ⁄ 4" (1797) 5'-10 5'-10 1 ⁄ 4" (1988) " (1988) 6'-6 1 ⁄ 46'-6 30-3462-18 30-3462-18 3 ⁄ 4" (2000) " (2000) 6'-6 3 ⁄ 46'-6
HEIGHTS HEIGHTS
HEIGHTS HEIGHTS
15
⁄ 8" 5 ⁄ 8" 7'-10 57'-10 (2403)(2403)
8'-6 5 ⁄ 88'-6 " 5 ⁄ 8" (2599)(2599)
" 5 ⁄ 8" 9'-2 5 ⁄ 89'-2 (2810)(2810)
⁄ 8" 5 ⁄ 8" 9'-10 59'-10 (3013)(3013)
" 3 ⁄ 4" 7'-9 3 ⁄ 47'-9 57'-10 ⁄ 8(2581) " 5 ⁄ 8" 7'-10 (2581) (2403)(2403) 30-20310-2-18 30-20310-2-18 " 3 ⁄ 4" 7'-9 3 ⁄ 47'-9 (2581)(2581) 30-2042-2-18 30-2042-2-18 30-20310-2-18 30-20310-2-18
8'-5 3 ⁄ 48'-5 " 3 ⁄ 4" 5 ⁄ 88'-6 5 ⁄ 8" 8'-6 "(2584) (2584) (2599)(2599) 30-24310-2-18 30-24310-2-18 8'-5 3 ⁄ 48'-5 " 3 ⁄ 4" (2584)(2584) 30-2442-2-18 30-2442-2-18 30-24310-2-18 30-24310-2-18
30-2046-2-18 30-2046-2-18 30-2042-2-18 30-2042-2-18
30-2446-2-18 30-2446-2-18 30-2442-2-18 30-2442-2-18
" 3 ⁄ 4" 9'-1 3 ⁄ 49'-1 5 ⁄ 89'-2 5 ⁄ 8" "(2788) 9'-2 (2788) (2810)(2810) 30-28310-2-18 30-28310-2-18 " 3 ⁄ 4" 9'-1 3 ⁄ 49'-1 (2788)(2788) 30-2842-2-18 30-2842-2-18 30-28310-2-18 30-28310-2-18 30-2846-2-18 30-2846-2-18 30-2842-2-18 30-2842-2-18
" 3 ⁄ 4" 9'-9 3 ⁄ 49'-9 59'-10 ⁄ 8(2991) " 5 ⁄ 8" 9'-10 (2991) (3013)(3013) 30-30310-2-18 30-30310-2-18 " 3 ⁄ 4" 9'-9 3 ⁄ 49'-9 (2991)(2991) 30-3042-2-18 30-3042-2-18 30-30310-2-18 30-30310-2-18 30-3046-2-18 30-3046-2-18 30-3042-2-18 30-3042-2-18
30-2052-2-18 30-2052-2-18 30-2046-2-18 30-2046-2-18
30-2452-2-18 30-2452-2-18 30-2446-2-18 30-2446-2-18
30-2852-2-18 30-2852-2-18 30-2846-2-18 30-2846-2-18
30-3052-2-18 30-3052-2-18 30-3046-2-18 30-3046-2-18
30-2056-2-18 30-2056-2-18 30-2052-2-18 30-2052-2-18
30-2456-2-18 30-2456-2-18 30-2452-2-18 30-2452-2-18
30-2856-2-18 30-2856-2-18 30-2852-2-18 30-2852-2-18
30-3056-2-18 30-3056-2-18 30-3052-2-18 30-3052-2-18
30-2062-2-18 30-2062-2-18 30-2056-2-18 30-2056-2-18
30-2462-2-18 30-2462-2-18 30-2456-2-18 30-2456-2-18
30-2862-2-18 30-2862-2-18 30-2856-2-18 30-2856-2-18
30-3062-2-18 30-3062-2-18 30-3056-2-18 30-3056-2-18
30-2062-2-18 30-2062-2-18
30-2462-2-18 30-2462-2-18
30-2862-2-18 30-2862-2-18
30-3062-2-18 30-3062-2-18
TableTable of Double-Hung of Double-Hung 30° Angle 30° Angle Bay Window Bay Window SizesSizes with with 2-0 Flanking 2-0 Flanking Double-Hung Double-Hung Windows Windows Projection Projection
3 ⁄ 4" (375) 14 3 ⁄ 4"14 (375)
3 ⁄ 4" (375) 14 3 ⁄ 4"14 (375)
3 ⁄ 4" (375) 14 3 ⁄ 4"14 (375)
3 ⁄ 4" (375) 14 3 ⁄ 4"14 (375)
3 ⁄ 4" (375) 14 3 ⁄ 4"14 (375)
Projection Projection
3 ⁄ 4" (375) 14 3 ⁄ 4"14 (375)
3 ⁄ 4" (375) 14 3 ⁄ 4"14 (375)
3 ⁄ 4" (375) 14 3 ⁄ 4"14 (375)
3 ⁄ 4" (375) 14 3 ⁄ 4"14 (375)
3 ⁄ 4" (375) 14 3 ⁄ 4"14 (375)
WIDTHSWIDTHS
7'-7" 7'-7" Minimum Minimum Rough Rough Opening Opening 7'-7 7 ⁄ 87'-7 " 7 ⁄ 8" WindowWindow Dimension Dimension (2311)(2311) (2334) (2334) 1 1 ⁄ 4" (1276) 4'-2 ⁄ 44'-2 " (1276) 30-34310-20 30-34310-20 3 3 7'-7" 7'-7" ⁄ ⁄ 4 " 4 " 4'-2 4'-2 (1289) (1289) Minimum Minimum Rough Opening 1 ⁄ 4Opening " (1378) " (1378) (2311)(2311) 4'-6 1 ⁄ 4Rough 4'-6 30-3442-20 30-3442-20 13 ⁄ 4" (1276) 4'-2 " (1276) 4'-6 13 ⁄ 44'-2 4'-6 (1391) (1391) 30-34310-20 30-34310-20 3 3 ⁄14⁄"4" (1289) 4'-2 ⁄"4" (1289) 4'-10 ⁄144'-2 4'-10 (1480) (1480) 30-3446-20 30-3446-20 1 ⁄34"⁄ 4" (1378) "⁄ 4" (1378) 4'-6 4'-101 ⁄344'-6 4'-10 (1492) (1492) 30-3442-20 30-3442-20 3 3 1 ⁄ 4" (1391) 4'-6 " (1391) 5'-6 1 ⁄ 44'-6 5'-6 (1683) (1683) 30-3452-20 30-3452-20 3 ⁄14⁄"4" (1480) ⁄"4" (1480) 4'-10 5'-6 3 ⁄144'-10 5'-6 (1695) (1695) 30-3446-20 30-3446-20 3 3 1 ⁄ 4" (1492) 4'-10 ⁄ 4" (1492) 5'-10 14'-10 5'-10 (1784) (1784) 30-3456-20 30-3456-20 1 1 3 3 ⁄ ⁄ 4 " 4 " 5'-6 5'-6 (1683) (1683) ⁄ ⁄ 4" (1797) 4" (1797) 5'-10 5'-10 30-3452-20 30-3452-20 31 ⁄ 4" (1695) 5'-6 " (1695) 6'-6 31 ⁄ 45'-6 6'-6 (1988) (1988) 30-3462-20 30-3462-20 1 1 3 3 ⁄ ⁄ 4 " 4 " 5'-10 5'-10 (1784) (1784) ⁄ 4" (2000) " (2000) 6'-6 ⁄ 46'-6 30-3456-20 30-3456-20 3 ⁄ 4" (1797) ⁄ 4" (1797) 5'-10 35'-10 1 ⁄ 4" (1988) " (1988) 6'-6 1 ⁄ 46'-6 30-3462-20 30-3462-20 3 ⁄ 4" (2000) " (2000) 6'-6 3 ⁄ 46'-6
HEIGHTS HEIGHTS
HEIGHTS HEIGHTS
7'-7 7 ⁄ 87'-7 " 7 ⁄ 8" WIDTHS WIDTHS Window Window Dimension Dimension (2334)(2334)
8'-5 9 ⁄ 168'-5 " 9 ⁄ 16" (2580)(2580)
9'-1 9 ⁄ 169'-1 " 9 ⁄ 16" (2783)(2783)
9'-9 9 ⁄ 169'-9 " 9 ⁄ 16" (2986)(2986)
⁄ 16" 9 ⁄ 16" 10'-5 910'-5 (3189)(3189)
8'-4 3 ⁄ 48'-4 " 3 ⁄ 4" 9 ⁄ 16 8'-5 8'-5 " 9 ⁄ 16" (2559) (2559) (2580)(2580) 30-20310-2-20 30-20310-2-20 8'-4 3 ⁄ 48'-4 " 3 ⁄ 4" (2559)(2559) 30-2042-2-20 30-2042-2-20 30-20310-2-20 30-20310-2-20
9'-0 3 ⁄ 49'-0 " 3 ⁄ 4" 9 ⁄ 16 9'-1 9'-1 " 9 ⁄ 16" (2762) (2762) (2783)(2783) 30-24310-2-20 30-24310-2-20 9'-0 3 ⁄ 49'-0 " 3 ⁄ 4" (2762)(2762) 30-2442-2-20 30-2442-2-20 30-24310-2-20 30-24310-2-20
30-2046-2-20 30-2046-2-20 30-2042-2-20 30-2042-2-20
30-2446-2-20 30-2446-2-20 30-2442-2-20 30-2442-2-20
9'-8 3 ⁄ 49'-8 " 3 ⁄ 4" 9 ⁄ 16 9'-9 9'-9 " 9 ⁄ 16" (2965) (2965) (2986)(2986) 30-28310-2-20 30-28310-2-20 9'-8 3 ⁄ 49'-8 " 3 ⁄ 4" (2965)(2965) 30-2842-2-20 30-2842-2-20 30-28310-2-20 30-28310-2-20 30-2846-2-20 30-2846-2-20 30-2842-2-20 30-2842-2-20
⁄ 4" 3 ⁄ 4" 10'-4 310'-4 910'-5 ⁄ 16(3169) " 9 ⁄ 16" 10'-5 (3169) (3189)(3189) 30-30310-2-20 30-30310-2-20 ⁄ 4" 3 ⁄ 4" 10'-4 310'-4 (3169)(3169) 30-3042-2-20 30-3042-2-20 30-30310-2-20 30-30310-2-20 30-3046-2-20 30-3046-2-20 30-3042-2-20 30-3042-2-20
30-2052-2-20 30-2052-2-20 30-2046-2-20 30-2046-2-20
30-2452-2-20 30-2452-2-20 30-2446-2-20 30-2446-2-20
30-2852-2-20 30-2852-2-20 30-2846-2-20 30-2846-2-20
30-3052-2-20 30-3052-2-20 30-3046-2-20 30-3046-2-20
30-2056-2-20 30-2056-2-20 30-2052-2-20 30-2052-2-20
30-2456-2-20 30-2456-2-20 30-2452-2-20 30-2452-2-20
30-2856-2-20 30-2856-2-20 30-2852-2-20 30-2852-2-20
30-3056-2-20 30-3056-2-20 30-3052-2-20 30-3052-2-20
30-2062-2-20 30-2062-2-20 30-2056-2-20 30-2056-2-20
30-2462-2-20 30-2462-2-20 30-2456-2-20 30-2456-2-20
30-2862-2-20 30-2862-2-20 30-2856-2-20 30-2856-2-20
30-3062-2-20 30-3062-2-20 30-3056-2-20 30-3056-2-20
30-2062-2-20 30-2062-2-20
30-2462-2-20 30-2462-2-20
30-2862-2-20 30-2862-2-20
30-3062-2-20 30-3062-2-20
Ordering Ordering Prefix:Prefix: ProperProper supportsupport of projecting of projecting bow and bow bayand windows bay windows is required, is required, see installation see installation instructions. instructions. FailureFailure to to do so may do so result may in result injury, in product injury, product or property or property damage. damage.
® Double-Hung ® Double-Hung WDH WDH 400 Series 400 Series Woodwright Woodwright Window Window ® Picture ® Picture WPW WPW 400 Series 400 Series Woodwright Woodwright Window Window TW TW400 Series 400 Series Tilt-Wash Tilt-Wash Double-Hung Double-Hung Window Window DHP DHP 400 Series 400 Series Tilt-Wash Tilt-Wash PicturePicture Window Window
• "Projection" • "Projection" refers torefers outside to outside of the exterior of the sheathing exterior sheathing to the outer to the edge outer of edge the window. of the window. • "Window • "Window Dimension" Dimension" always refers alwaystorefers outside to outside frame toframe frametodimension. frame dimension. • "Minimum • "Minimum Rough Opening" Rough Opening" dimensions dimensions may need may to need be increased to be increased to allowtoforallow use of forbuilding use of building wraps, flashing, wraps, flashing, sill panning, sill panning, brackets, brackets, fasteners fasteners or otheroritems. otherSee items. pages See288-289 pages 288-289 for morefordetails. more details. • One Andersen • One Andersen cable kitcable is included kit is included with the with unit the for proper unit forinstallation. proper installation. Each cable Eachsupports cable supports a maximum a maximum load of 500 load lbs. of 500 or 227 lbs. kg; or 227 additional kg; additional support support is necessary is necessary for loadsforexceeding loads exceeding 500 lbs.500 or 227 lbs. kg. or 227 kg. • Angle •bay Angle andbay bowand windows bow windows include only include theonly basictheunit. basic Roof unit. andRoof other and installation other installation materialsmaterials providedprovided by otherby manufacturers. other manufacturers. • For walkout • For walkout angle bay angle andbay bowand window bow window details and details installation and installation guidelines, guidelines, contact contact your Andersen your Andersen suppliersupplier or visit our or visit website our website at andersenwindows.com/adf. at andersenwindows.com/adf. • Dimensions • Dimensions in parentheses in parentheses are in millimeters. are in millimeters.
111
BAY & BOW WINDOWS Table of Double-Hung 45° Angle Bay Window15 ⁄Sizes with Picture Window and 1-815Flanking Windows15 ⁄ 15 ⁄ 15 ⁄ ⁄ Projection Projection
17 16" (456) 17 15 ⁄ 16" (456)
17 16" (456) 17 15 ⁄ 16" (456)
17 16" (456) 17 15 ⁄ 16" (456)
17 16" (456) 17 15 ⁄ 16" (456)
17 16" (456) 17 15 ⁄ 16" (456)
17 15 ⁄ 16" (456) 17 15 ⁄ 16" (456)
6'-4 7 ⁄ 16" 7 ⁄ 16" 6'-4 (1942) 1 (1942) 6'-3 ⁄ 8"
6'-8 7 ⁄ 16" 7 ⁄ 16" 6'-8 (2043)
7'-2 1 ⁄ 8" 7'-2 1 ⁄ 8" (2188) 3 ⁄4" (2188) 7'-0
7'-6 1 ⁄ 8" 1 ⁄ 8" 7'-6 (2289) 3 (2289) 7'-4 ⁄4"
8'-2 1 ⁄ 8" 1 ⁄ 8" 8'-2 (2492) 3 (2492) 8'-0 ⁄4"
8'-10 1 ⁄ 8" 1 ⁄ 8" 8'-10 (2696)
3 ⁄4" 7'-0 (2153) (2153) 45-310310-18 45-310310-18 45-31042-18 45-31042-18 45-31046-18 45-31046-18 45-31052-18 45-31052-18 45-31056-18 45-31056-18 45-31062-18 45-31062-18
3 ⁄4" 7'-4 (2254) (2254) 45-42310-18 45-42310-18 45-4242-18 45-4242-18 45-4246-18 45-4246-18 45-4252-18 45-4252-18 45-4256-18 45-4256-18 45-4262-18 45-4262-18
3 ⁄4" 8'-0 (2457) (2457) 45-410310-18 45-410310-18 45-41042-18 45-41042-18 45-41046-18 45-41046-18 45-41052-18 45-41052-18
WIDTHS WIDTHS
HEIGHTS HEIGHTS
Window Dimension Window Dimension Minimum Rough Opening Minimum Rough 1 ⁄4"Opening (1276) 4'-2 4'-2 31⁄4⁄4"" 4'-2 4'-2 13⁄4⁄4"" 4'-6 4'-6 31⁄4⁄4"" 4'-6 4'-6 31⁄4⁄4"" 4'-10 4'-10 31⁄4⁄4"" 4'-10 4'-101 ⁄43"⁄4" 5'-6 5'-6 31⁄4⁄4"" 5'-6 5'-6 31⁄4⁄4"" 5'-10 5'-10 31⁄4⁄4"" 5'-10 5'-101 ⁄34"⁄4" 6'-6 6'-6 31⁄4⁄4"" 6'-6 6'-6 3 ⁄4"
(1276) (1289) (1289) (1378) (1378) (1391) (1391) (1480) (1480) (1492) (1492) (1683) (1683) (1695) (1695) (1784) (1784) (1797) (1797) (1988) (1988) (2000) (2000)
1 ⁄ 8" 6'-3 (1908) (1908) 45-30310-18 45-30310-18 45-3042-18 45-3042-18 45-3046-18 45-3046-18 45-3052-18 45-3052-18
1 ⁄ 8" (2043) 6'-7 1 ⁄ 8" 6'-7 (2010) (2010)
45-3442-18 45-3442-18 45-3446-18 45-3446-18
3 ⁄4" (2696) 8'-8 3 ⁄4" 8'-8 (2661) (2661)
45-5642-18 45-5642-18 45-5646-18 45-5646-18
Table of Double-Hung 45° Angle Bay Window Sizes with Picture Window and 2-0 Flanking Windows Projection Projection
20 3 ⁄4" (527) 20 3 ⁄4" (527)
20 3 ⁄4" (527) 20 3 ⁄4" (527)
20 3 ⁄4" (527) 20 3 ⁄4" (527)
20 3 ⁄4" (527) 20 3 ⁄4" (527)
20 3 ⁄4" (527) 20 3 ⁄4" (527)
20 3 ⁄4" (527) 20 3 ⁄4" (527)
HEIGHTS HEIGHTS
WIDTHS WIDTHS Window Dimension Window Dimension Minimum Rough Opening Minimum 1 ⁄4"Opening Rough 4'-2 (1276) 4'-2 31⁄4⁄4"" (1289) (1276) 4'-2 4'-2 13⁄4⁄4"" (1378) (1289) 4'-6 4'-6 31⁄4⁄4"" (1391) (1378) 4'-6 4'-6 31⁄4⁄4"" (1480) (1391) 4'-10 4'-10 31⁄4⁄4"" (1492) (1480) 4'-10 4'-101 ⁄43"⁄4" (1683) (1492) 5'-6 5'-6 31⁄4⁄4"" (1695) (1683) 5'-6 5'-6 31⁄4⁄4"" (1784) (1695) 5'-10 5'-10 31⁄4⁄4"" (1797) (1784) 5'-10 5'-101 ⁄34"⁄4" (1988) (1797) 6'-6 6'-6 31⁄4⁄4"" (2000) (1988) 6'-6 6'-6 3 ⁄4" (2000)
6'-10 1 ⁄ 8" 1 ⁄ 8" 6'-10 (2086) 3 ⁄4" (2086) 6'-8 3 ⁄4" 6'-8 (2051) (2051) 45-30310-20 45-30310-20 45-3042-20 45-3042-20 45-3046-20 45-3046-20 45-3052-20 45-3052-20
7'-2 1 ⁄ 8" 1 ⁄ 8" 7'-2 (2188) 3 ⁄4" (2188) 7'-0 3 ⁄4" 7'-0 (2153) (2153)
45-3442-20 45-3442-20 45-3446-20 45-3446-20
7'-7 13 ⁄ 16" 13 ⁄ 16" 7'-7 (2332) 1 ⁄ 2" (2332) 7'-6
7'-11 13 ⁄ 16" 13 ⁄ 16" 7'-11 (2434) 1 ⁄ 2" (2434) 7'-10
8'-7 13 ⁄ 16" 13 ⁄ 16" 8'-7 (2637) 1 ⁄ 2" (2637) 8'-6
9'-3 13 ⁄ 16" 13 ⁄ 16" 9'-3 (2840) 1 ⁄ 2" (2840) 9'-2
1 ⁄ 2" 7'-6 (2299) (2299) 45-310310-20 45-310310-20 45-31042-20 45-31042-20 45-31046-20 45-31046-20 45-31052-20 45-31052-20 45-31056-20 45-31056-20 45-31062-20 45-31062-20
1 ⁄ 2" 7'-10 (2400) (2400) 45-42310-20 45-42310-20 45-4242-20 45-4242-20 45-4246-20 45-4246-20 45-4252-20 45-4252-20 45-4256-20 45-4256-20 45-4262-20 45-4262-20
1 ⁄ 2" 8'-6 (2604) (2604) 45-410310-20 45-410310-20 45-41042-20 45-41042-20 45-41046-20 45-41046-20 45-41052-20 45-41052-20
1 ⁄ 2" 9'-2 (2807) (2807)
Proper support of projecting bow and bay windows is required, see installation instructions. Failure to do so may result in injury, product or property damage.
WDH WPW TW DHP
45-5642-20 45-5642-20 45-5646-20 45-5646-20
400 Series Woodwright® Double-Hung Window 400 Series Woodwright® Picture Window 400 Series Tilt-Wash Double-Hung Window 400 Series Tilt-Wash Picture Window
• "Projection" refers to outside of the exterior sheathing to the outer edge of the window. • "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • One Andersen cable kit is included with the unit for proper installation. Each cable supports a maximum load of 500 lbs. or 227 kg; additional support is necessary for loads exceeding 500 lbs. or 227 kg. • Angle bay and bow windows include only the basic unit. Roof and other installation materials provided by other manufacturers. • For walkout angle bay and bow window details and installation guidelines, contact your Andersen supplier or visit our website at andersenwindows.com/adf. • Dimensions in parentheses are in millimeters.
112
15
Projection
15
15
17 15 ⁄ 16" (456)
17 15 ⁄ 16" (456)
17 15 ⁄ 16" (456)
17 15 ⁄ 16" (456)
17 15 ⁄ 16" (456)
17 15 ⁄ 16" (456)
17 15 ⁄ 16" (465)
6'-8 7 ⁄ 16" (2043) 6'-8 6'-7 71 ⁄⁄16 8"" (2043) (2010)
7'-6 1 ⁄ 8" (2289) 7'-6 71 ⁄ 88" 7'-4 (2289) (2257)
8'-2 1 ⁄ 8" (2492) 8'-2 8'-0 13⁄ 84" (2492) (2445)
8'-10 1 ⁄ 8" (2696) 8'-10 8'-8 31⁄ 4⁄ 8" " (2696) (2661)
9'-6 1 ⁄ 8" (2899) 9'-6 9'-4 13 ⁄ 84" (2899) (2864)
6'-7 1 ⁄ 8" 45-34310-18 (2010)
7'-4 7 ⁄ 8" 45-20310-2-18 (2257)
8'-0 3 ⁄ 4" 45-24310-2-18 (2445)
8'-8 3 ⁄ 4" 45-28310-2-18 (2661)
9'-4 3 ⁄ 4" 45-30310-2-18 (2864)
45-3442-18 45-34310-18
45-2042-2-18 45-20310-2-18
45-2442-2-18 45-24310-2-18
45-2842-2-18 45-28310-2-18
45-3042-2-18 45-30310-2-18
45-3446-18 45-3442-18
45-2046-2-18 45-2042-2-18
45-2446-2-18 45-2442-2-18
45-2846-2-18 45-2842-2-18
45-3046-2-18 45-3042-2-18
45-3452-18 45-3446-18
45-2052-2-18 45-2046-2-18
45-2452-2-18 45-2446-2-18
45-2852-2-18 45-2846-2-18
45-3052-2-18 45-3046-2-18
45-3456-18 45-3452-18
45-2052-2-18 45-2056-2-18
45-2456-2-18 45-2452-2-18
45-2856-2-18 45-2852-2-18
45-3052-2-18 45-3056-2-18
45-3462-18 45-3456-18
45-2062-2-18 45-2056-2-18
45-2462-2-18 45-2456-2-18
45-2862-2-18 45-2856-2-18
45-3062-2-18 45-3056-2-18
45-3462-18
45-2062-2-18
45-2462-2-18
45-2862-2-18
45-3062-2-18
400 Series Bay & Bow Windows
⁄ 16" (456) Projection 17 ⁄ 16" (456) 17 ⁄ 16" (465) Table of Double-Hung 45°17Angle Bay Window Sizes with 1-8 Flanking Windows
WIDTHS WIDTHS Window Dimension
HEIGHTSHEIGHTS
MinimumDimension Window Rough Opening 4'-2 1 ⁄ 4" (1276) Minimum Rough " (1289) 4'-2 3 ⁄ 4Opening 4'-6 (1276) 4'-2 1 ⁄ 4" (1378) 4'-6 (1289) 4'-2 3 ⁄ 4" (1391) 4'-10 (1378) 4'-6 1 ⁄14"⁄ 4" (1480) 4'-10 (1391) 4'-6 3 ⁄34"⁄ 4" (1492) 5'-6 (1480) 4'-101 ⁄14"⁄ 4" (1683) 5'-6 3 ⁄34"⁄ 4" (1695) (1492) 4'-10 5'-101 ⁄14"⁄ 4" (1784) (1683) 5'-6 5'-10 (1695) 5'-6 3 ⁄34"⁄ 4" (1797) 6'-6 5'-101 ⁄14"⁄ 4" (1988) (1784) 6'-6 3 ⁄34"⁄ 4" (2000) 5'-10 (1797) 6'-6 1 ⁄ 4" (1988) 6'-6 3 ⁄ 4" (2000)
Table of Double-Hung 45° Angle Bay Window Sizes with 2-0 Flanking Windows Projection
20 3 ⁄ 4" (257)
20 3 ⁄ 4" (257)
20 3 ⁄ 4" (257)
20 3 ⁄ 4" (257)
20 3 ⁄ 4" (257)
Projection
20 3 ⁄ 4" (257)
20 3 ⁄ 4" (257)
20 3 ⁄ 4" (257)
20 3 ⁄ 4" (257)
20 3 ⁄ 4" (257)
WIDTHS WIDTHS Window Dimension
HEIGHTSHEIGHTS
MinimumDimension Window Rough Opening 4'-2 1 ⁄ 4" (1276) Minimum Rough " (1289) 4'-2 3 ⁄ 4Opening 4'-6 4'-2 1 ⁄ 4" (1378) (1276) 4'-6 4'-2 3 ⁄ 4" (1391) (1289) 4'-10 4'-6 1 ⁄14"⁄ 4" (1480) (1378) 4'-10 4'-6 3 ⁄34"⁄ 4" (1492) (1391) 5'-6 4'-101 ⁄14"⁄ 4" (1683) (1480) 5'-6 3 ⁄34"⁄ 4" (1695) 4'-10 (1492) 5'-101 ⁄14"⁄ 4" (1784) 5'-6 (1683) 5'-10 5'-6 3 ⁄34"⁄ 4" (1797) (1695) 6'-6 5'-101 1⁄ 4⁄"4" (1988) (1784) 6'-6 3 ⁄34"⁄ 4" (2000) 5'-10 (1797) 6'-6 1 ⁄ 4" (1988) 6'-6 3 ⁄ 4" (2000)
7'-2 1 ⁄ 8" (2188) 7'-2 7'-0 13 ⁄ 48" (2188) (2153)
7'-11 13 ⁄ 16" (2434) 7'-11 2"" 7'-10131 ⁄ 16 (2434) (2400)
8'-7 13 ⁄ 16" (2637) 8'-7 8'-6131 ⁄ 216"" (2637) (2604)
9'-3 13 ⁄ 16" (2840) 9'-3 9'-2131 ⁄ 216"" (2840) (2807)
9'-11 13 ⁄ 16" (3043) 9'-11 2"" 9'-10131 ⁄ 16 (3043) (3010)
7'-0 3 ⁄ 4" 45-34310-20 (2153)
7'-10 1 ⁄ 2" 45-20310-2-20 (2400)
8'-6 1 ⁄ 2" 45-24310-2-20 (2604)
9'-2 1 ⁄ 2" 45-28310-2-20 (2807)
9'-10 1 ⁄ 2" 45-30310-2-20 (3010)
45-3442-20 45-34310-20
45-2042-2-20 45-20310-2-20
45-2442-2-20 45-24310-2-20
45-2842-2-20 45-28310-2-20
45-3042-2-20 45-30310-2-20
45-3446-20 45-3442-20
45-2046-2-20 45-2042-2-20
45-2446-2-20 45-2442-2-20
45-2846-2-20 45-2842-2-20
45-3046-2-20 45-3042-2-20
45-3452-20 45-3446-20
45-2052-2-20 45-2046-2-20
45-2452-2-20 45-2446-2-20
45-2852-2-20 45-2846-2-20
45-3052-2-20 45-3046-2-20
45-3456-20 45-3452-20
45-2056-2-20 45-2052-2-20
45-2456-2-20 45-2452-2-20
45-2856-2-20 45-2852-2-20
45-3052-2-20 45-3056-2-20
45-3462-20 45-3456-20
45-2062-2-20 45-2056-2-20
45-2462-2-20 45-2456-2-20
45-2862-2-20 45-2856-2-20
45-3062-2-20 45-3056-2-20
45-3462-20
45-2062-2-20
45-2462-2-20
45-2862-2-20
45-3062-2-20
Ordering Prefix: Proper support of projecting bow and bay windows is required, see installation instructions. Failure to do so may result in injury, product or property damage.
WDH WPW TW DHP
400 Series Woodwright® Double-Hung Window 400 Series Woodwright® Picture Window 400 Series Tilt-Wash Double-Hung Window 400 Series Tilt-Wash Picture Window
• "Projection" refers to outside of the exterior sheathing to the outer edge of the window. • "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • One Andersen cable kit is included with the unit for proper installation. Each cable supports a maximum load of 500 lbs. or 227 kg; additional support is necessary for loads exceeding 500 lbs. or 227 kg. • Angle bay and bow windows include only the basic unit. Roof and other installation materials provided by other manufacturers. • For walkout angle bay and bow window details and installation guidelines, contact your Andersen supplier or visit our website at andersenwindows.com/adf. • Dimensions in parentheses are in millimeters.
113
BAY & BOW WINDOWS Double-Hung 30° Angle Bay Window Details
Andersen® Cable Support System Andersen® Cable Support System
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Andersen Auxiliary Andersen Casing Auxiliary Casing 3 ⁄ 4" (19) 3 ⁄ 8" (10) 3 ⁄ 4" (19) 3 ⁄ 8" (10)
Adaptor
(6)
Overall Opening Width Overall Rough Unit Dimension Width
1 ⁄ 4"
(6)
7 ⁄ 16" (11)
Projection Projection
1 ⁄ 4"
9) (54 ) 5 ⁄ 8" (651 " 9) -9 . 1' 1 5 ⁄ 8(54 ) Dim . 29'5- ⁄ 8" (651 t i Un Dim1'- 5 ⁄ 8" 1-8 UnDitim. 2'-1 2-U0nit Dim. 30 1-8 Unit 0 2-Width Overall Rough Opening 30
Back Back of Flange of Flange
Mullion Post Inside Casing
1 5 ⁄ 16" (33) 1 5 ⁄ 16" (33)
Head
Check Rail Check Rail
Seat Board
(6) Lower (6) Platform Lower Board Platform Board Trim by others
(11)
Sill Back of Flange
)
Overall Opening Width Overall Rough Unit Dimension Width Overall Unit Dimension Width Horizontal Section
11 ⁄ 16"
(17) 11 ⁄ 16" (17)
1 ⁄ 2"
Projection Projection
Back Back of Flange of Flange
1 5 ⁄ 16" (33) 1 5 ⁄ 16" (33)
(10) Picture Unit Height BasicBasic Picture Unit Height
3 ⁄ 8"
Jamb
Batt Insulation Interior Trim by Others and Shims Batt Insulation and Shims Platform Below
Overall Rough Opening Width
Upper Platform Upper Board Platform 1 ⁄ 2" (13) Board
3 ⁄ 4" (19) 3 ⁄ 8" (10) 3 ⁄ 4" (19)
Jamb
Side Flashing Side Flashing Mullion Post with Vinyl Trim Mullion Strip Post with Vinyl Trim Strip
Andersen® Cable Support System Andersen® Cable Support System
Andersen Auxiliary Andersen Casing Auxiliary Casing
Tilt-wash window shown. Woodwright® window installation similar.
Platform Below Mullion Post Inside Casing Mullion Post Inside Casing
Vinyl Laminated Trim Board Vinyl Laminated Trim Board
Back of Flange Projection Projection Vertical Section
3)
Trim 3 ⁄ 8"
Head
Trim(10) Head Filler Board 3 ⁄ 8" (10) Head Filler Board
Head Board Head Board
Head Trim Trim
Seat Board Seat Board
1 ⁄ 4"
(6) Lower 1 ⁄ 4" (6) Platform Lower Board Platform Board Trim by others Trim by others 1 5 ⁄ 16" (33) 1 5 ⁄ 16" (33)
Sill Sill Back of Flange Projection Back of Flange Projection
Vinyl Laminated Trim Board Vinyl Laminated Trim Board
Vertical Section
• Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to unit installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
114
M
Spaced Seat Board Spaced Installation Seat Board Installation
Sill
Trim by others 1 5 ⁄ 16" (33) 1 5 ⁄ 16" (33)
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
M
1 ⁄ 4"
Double-Hung 45° Angle Bay Window Details
Interior Trim by Others
Seat Board
1 ⁄ 4"
7 ⁄ 16"
Overall Unit Dimension Width Horizontal Section
Head Board Opening RoughRough Opening HeightHeight
Jamb
(13)
Head Board
Overall Bay Height Unit Height Overall AngleAngle Bay Unit
Mullion Post Inside Casing
3 ⁄ 8" (10) Head Filler Board 3 ⁄ 8" (10) Head Filler Board Head
Tilt-Wash Unit Height BasicBasic Tilt-Wash Unit Height
Jamb Adaptor
1 ⁄ 2"
Opening RoughRough Opening HeightHeight
3)
3)
Upper Platform Upper Board Platform Board 1 ⁄ 2" (13)
Overall Bay Height Unit Height Overall AngleAngle Bay Unit
Woodwright® window shown. Tilt-wash window installation similar.
(13)
P
P M In
400 Series Gliding Windows
GLIDING WINDOWS
SECTION REFERENCE Table of Sizes ............................. 118 Specifications ............................ 119 Grille Patterns ............................ 119 Window Details .......................... 120 Performance Data ...................... 269 Warranty .............................290-291
GLIDING WINDOWS FEATURES
A H
Frame A The exterior of the frame is covered with fiberglass to maintain an attractive appearance while minimizing maintenance.
E
G
B Wood frame members are treated with
accommodate 4 1/2" (114) and 4 1/8" (105) wall construction.
Sash E For improved ventilation both sash are operable. Rigid vinyl encases the entire sash. A vinyl weld protects each sash corner for superior weathertightness to maintain an attractive appearance and minimize maintenance.
F Natural wood sash members help provide excellent structural stability and energy efficiency.
G Interior stops are unfinished pine. Low-maintenance prefinished White interiors are also available. Delrin ® Glides
Glass H High-performance glass • Low-E4® glass® • Low-E4® HeatLock™ glass • Low-E4® Sun glass • Low-E4® SmartSun™ glass • Low-E4® SmartSun™ HeatLock™ glass
Dark Bronze
Black
Pine
White
HARDWARE FINISHES
Antique Brass
Black
Bright Brass
Brushed Chrome
Distressed Distressed Bronze Nickel
Satin Nickel
Stone
White
Tempered glass and other glass options are available. Contact your Andersen supplier. A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite. Patterned Glass Patterned glass options are available. See page 10 for more details.
I ®
I For an added measure of security and increased weathertightness, the locking system pulls the sash firmly closed while pushing the sash tight to the side jambs. This lock is single-point on 2' (610) tall windows, two-point on 3' (914) tall windows, and three-point on 3'-6" (1067), 4' (1219) and 5' (1524) tall windows.
* Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 400 Series Limited Warranty. ** Hardware sold separately. Dimensions in parentheses are in millimeters. "Delrin" and "Teflon" are registered trademarks of E.I. du Pont de Nemours and Company. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
Oil Rubbed Polished Bronze Chrome
Distressed bronze and oil rubbed bronze are "living" finishes that will change with time and use.
GLIDING WINDOW HARDWARE
**
ROTATING SASH HANDLE Antique Brass | Black | Bright Brass Brushed Chrome | Distressed Bronze Distressed Nickel | Oil Rubbed Bronze Polished Chrome | Satin Nickel Stone | White Bold name denotes finish shown.
D
116
Forest Green
Terratone
options include:
Locking System
Teflon impregnated Delrin glides are self-lubricating and require only 8 lbs. or 3.6 kg. of force to operate. A stainless steel spring within the glide provides years* of reliable operation — even in harsh environments.
Sandtone
Naturally occurring variations in grain, color and texture of wood make each window one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
Hardware
®
Canvas
C B
spring tension vinyl are installed at the factory and help provide a tight seal between the sash and frame.
D Fold-out-and-lock installation flanges
White
F
a water-repellent wood preservative for long-lasting* protection and performance.
C Flexible bulb weatherstripping and
INTERIOR
EXTERIOR
ACCESSORIES Sold Separately Frame
Hardware
Insect Screens
Grilles
Extension Jambs
Passive Sash Handle
Choose full insect screen (fixed), or Pass-Thru (gliding) insect screen. Frames are available in colors to match product exteriors.
Grilles are available in a variety of configurations and widths. For gliding window grille patterns see page 119.
Attaches to the passive sash to aid in operation. Available in Sandtone color only.
Exclusive Andersen TruScene insect screens provide over 50% more clarity than our conventional insect screens for a beautiful unobstructed view. They allow more fresh air and sunlight in, while doing a better job of keeping out small insects.
Window Opening Control Device Kit
Conventional Insect Screen
®
Standard jamb depth is 4 9/16" (116). Extension jambs are available in unfinished pine or prefinished White. Some sizes may be veneered.
®
Conventional insect screens have charcoal powder-coated aluminum screen mesh.
Factory-applied and non-applied interior extension jambs are available in 1⁄16" (1.5) increments between 5 1⁄16" (129) and 7 1⁄8" (181).
A Window Opening Control Device Kit is available, which limits sash travel to less than 4" (102) when the window is first opened. Available in Stone and White. Device shown on a 200 Series gliding window.
Exterior Trim This product is available with Andersen® Exterior Trim. See pages 215-220 for details. CAUTION: • Painting and staining may cause damage to rigid vinyl. • 400 Series windows in Terratone color may be painted any color lighter than Terratone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Terratone any color darker than Terratone. • Do not paint 400 Series windows with White, Canvas, Sandtone, Forest Green, Dark Bronze or Black exterior colors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
For more information about glass, patterned glass, grilles and TruScene® insect screen see pages 10-16. For more information about product performance, installation accessories and warranty see pages 269-291 or visit
andersenwindows.com
Dimensions in parentheses are in millimeters.
117
400 Series Gliding Windows
TruScene ® Insect Screen
GLIDING WINDOWS Table of Gliding Window Sizes
Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Window Dimension
2'-11 1 ⁄4" (895)
3'-11 1 ⁄4" (1200)
4'-11 1 ⁄4" (1505)
5'-11 1 ⁄4" (1810)
3'-0" (914)
4'-0" (1219)
5'-0" (1524)
6'-0" (1829)
12 9 ⁄ 16" (319)
18 9 ⁄ 16" (472)
24 9 ⁄ 16" (624)
30 9 ⁄ 16" (776)
G32
G42
G33
G43
G53
G63◊
Minimum Rough Opening
14 1 ⁄ 8" (359) 27 1 ⁄ 8" 689)
Active
open after active sash has been opened. G436
G636◊
G536◊
39 1 ⁄ 8" (994) G34
G44◊
G54◊
G64◊
G35
G45◊
G55◊
G65◊
51 1 ⁄ 8" (1299)
4'-0" (1219)
Grille patterns shown on page 119.
5'-0" (1524)
3'-11 1 ⁄4" (1200)
G336
4-11 1 ⁄4" (1505)
Passive
Viewed from the exterior. Passive sash will
33 1 ⁄ 8" (841)
1'-11" (584) 3'-0" (914) 3'-6" (1067)
1'-10 1 ⁄4" (565) 3'-5 1 ⁄4" (1048)
2'-11 1 ⁄4" (895)
Unobstructed Glass (single sash only)
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. ◊ Meet or exceed clear opening area of 5.7 sq. ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610). See table on page 119.
Handle Location Operational force of handle is equal to 8 lbs. or 3.6 kg. Dimensions shown are from top of handle in open position.
10 1 ⁄ 16" (256) Top of Subfloor to Top of Window 6'-10 1 ⁄ 8" (2086)
2'-1 3 ⁄ 8" (645)
2'-4 9 ⁄ 16" (725)
2'-5 1 ⁄ 16" (738)
G2 heights G3 heights G36 heights 6'-0 1 ⁄ 16" (1830)
• Dimensions in parentheses are in millimeters.
118
1'-9 3 ⁄ 8" (543)
5'-0 3 ⁄4" (1543)
4'-8 3 ⁄4" (1441)
4'-5 1 ⁄ 16" (1348)
G4 heights
4'-5 9 ⁄ 16" (1361)
G5 heights
Gliding Window Opening and Area Specifications
G32
1.70
(0.16)
14 9/32"
(363)
17 1/8"
(435)
2.5
(0.23)
1.70
(0.16)
62 9/16"
(1589)
5.45
G33
3.00
(0.28)
14 9/32"
(363)
30 1/8"
(765)
4.7
(0.44)
3.00
(0.28)
49 9/16"
(1259)
8.63
(0.80)
G336
3.58
(0.33)
14 9/32"
(363)
36 1/8"
(918)
5.7
(0.53)
3.58
(0.33)
43 9/16"
(1107)
10.10
(0.94)
G34
4.18
(0.39)
14 9/32"
(363)
42 1/8"
(1070)
6.8
(0.63)
4.18
(0.39)
37 9/16"
(954)
11.57
(1.08)
G35
5.40
(0.50)
14 9/32"
(363)
54 1/8"
(1375)
8.9
(0.83)
5.40
(0.50)
25 9/16"
(649)
14.50
(1.35)
G42
2.40
(0.22)
20 9/32"
(515)
17 1/8"
(435)
3.6
(0.33)
2.40
(0.22)
62 9/16"
(1589)
7.30
(0.68)
G43
4.40
(0.41)
20 9/32"
(515)
30 1/8"
(765)
7.0
(0.65)
4.40
(0.41)
49 9/16"
(1259)
11.57
(1.08)
G436
5.10
(0.47)
20 9/32"
(515)
36 1/8"
(918)
8.5
(0.79)
5.10
(0.47)
43 9/16"
(1107)
13.54
(1.26)
G44 ◊
6.00
(0.56)
20 9/32"
(515)
42 1/8"
(1070)
10.0
(0.93)
6.00
(0.56)
37 9/16"
(954)
15.50
(1.44)
G45 ◊
7.62
(0.71)
20 9/32"
(515)
54 1/8"
(1375)
13.1
(1.22)
7.62
(0.71)
25 9/16"
(649)
19.44
(1.81)
G53
5.50
(0.51)
26 9/32"
(668)
30 1/8"
(765)
9.2
(0.86)
5.50
(0.51)
49 9/16"
(1259)
14.50
(1.35)
G536 ◊
6.60
(0.61)
26 9/32"
(668)
36 1/8"
(918)
11.3
(1.05)
6.60
(0.61)
43 9/16"
(1107)
16.97
(1.58)
G54 ◊
7.70
(0.72)
26 9/32"
(668)
42 1/8"
(1070)
13.3
(1.24)
7.70
(0.72)
37 9/16"
(954)
19.44
(1.81)
G55 ◊
9.90
(0.92)
26 9/32"
(668)
54 1/8"
(1375)
17.4
(1.62)
9.90
(0.92)
25 9/16"
(649)
24.38
(2.27)
G63 ◊
6.75
(0.63)
32 9/32"
(820)
30 1/8"
(765)
11.5
(1.07)
6.75
(0.63)
49 9/16"
(1259)
17.44
(1.62)
G636 ◊
8.10
(0.75)
32 9/32"
(820)
36 1/8"
(918)
14.0
(1.30)
8.10
(0.75)
43 9/16"
(1107)
20.41
(1.90)
G64 ◊
9.44
(0.88)
32 9/32"
(820)
42 1/8"
(1070)
16.6
(1.54)
9.44
(0.88)
37 9/16"
(954)
23.38
(2.17)
G65 ◊
12.13
(1.13)
32 9/32"
(820)
54 1/8"
(1375)
21.7
(2.02)
12.13
(1.13)
25 9/16"
(649)
29.32
(2.72)
Width Inches/(mm)
Glass Area Sq. Ft./(m2)
Height Inches/(mm)
Vent Area Sq. Ft./(m2)
Top of Subfloor to Top of Sill Parting Stop Inches/(mm)
Clear Opening Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2) (0.51)
400 Series Gliding Windows
Clear Opening in Full Open Position Window Number
• "Top of Subfloor to Top of Inside Sill Stop" is calculated based upon a structural header height of 6'-10 /2" (2096). • Dimensions in parentheses are in millimeters or square meters. ◊ Meet or exceed clear opening area of 5.7 sq. ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610). 1
Grille Patterns Prairie A
Colonial
Modified Colonial
Modified Colonial SCR (Simulated Check Rail)
Tall Fractional
Tall Fractional SCR (Simulated Check Rail)
Short Fractional
Short Fractional SCR (Simulated Check Rail)
Gliding
Specified Equal Light Examples
Number of lights and overall pattern varies with window size. Patterns are not available in all configurations. Specified equal light and custom patterns are also available. For more information on divided light see page 11 or visit
Specified Equal Light Examples
Custom Pattern Examples
andersenwindows.com/grilles.
Custom Pattern Examples
119
GLIDING WINDOWS Gliding Window Details
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116)
Insect Screen
Jamb
3 ⁄ 8"
Parting p to bfloor mension
Jamb
Meeting Stile
Clear Opg. Width
Unit Dimension Width
(10)
3 ⁄ 8"
Clear Opg. Height
Glass
1 9 ⁄ 16" (40)
2 5 ⁄ 16" (59) Unit Dimension Height
Minimum Rough Opening Height
4 1 ⁄ 8" (105)
3 ⁄ 4"
Low-E4 Insulating Glass Head
Sill Parting Stop Jamb 7 ⁄ 8"
(23) 1 15 ⁄ 16" (49)
2 13 ⁄ 16" (72)
(10)
Minimum Rough Opening Width
Horizontal Section Horizontal Section
Sill VerticalSection Section Vertical
Separate Rough Openings Detail Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
To meet structural requirements or to achieve a wider joined appearance, windows may be installed into separate rough openings having vertical support (by others) in combination with Andersen® exterior filler and exterior vinyl trim. 3" (76) 2" (51) 3" (76) 1 1 ⁄ 8" (29)
1 1 ⁄ 8" (29)
Vertical Support by Others Jamb
Jamb 2" (51) Horizontal Section Gliding and Gliding
• Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. • Dimensions in parentheses are in millimeters.
120
(19) ®
Sill Parting Stop to Subfloor Dimension
3 ⁄ 8"
(10)
400 Series Specialty Windows
SPECIALTY WINDOWS
SECTION REFERENCE Half Circle, Quarter Circle, Elliptical, Eyebrow, Circle, Oval, Gothic, Octagon and Monumental Circle & Quarter Circle Windows Tables of Sizes ................ 124-127 Specifications ................. 125-126
CUSTOM SIZING in ⁄ " (3) increments 18
Grille Patterns ........................ 126 Window Details ............... 128-129 Joining Details........................ 130 Custom Arch Windows............... 131 Arch, Springline™ & Springline™ Flanker Windows Tables of Sizes ................ 132-137 Specifications ................. 133-135 Grille Patterns ........................ 136 Window Details ...................... 137 ® Flexiframe Windows
Shapes & Sizes ...................... 138 Window Detail ........................ 139 Joining Details................. 139-140 Dimensions in parentheses are in millimeters.
SPECIALTY WINDOWS C
FEATURES
F
EXTERIOR
G
Frame A Wood frame members are treated
INTERIOR
E
with a water-repellent preservative for long-lasting* protection and performance. Radii are made of laminated pine, offering improved strength and appearance.
B The lineal sections of the jamb and sill on eyebrow, gothic, octagon, monumental, Flexiframe®, custom arch and arch windows are covered with a low-maintenance, fiberglassreinforced composite. The arched head members and Springline™ units are covered with stretch-formed aluminum.
F
H
G
White
Canvas
Sandtone
Forest Green
Dark Bronze
Black
Terratone
Pine
B H
Arch Window
C The vinyl installation flange on eyebrow,
D
White
Naturally occurring variations in grain, color and texture of wood make each window one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
Half Circle Window
®
gothic, octagon, monumental, Flexiframe , custom arch, arch and Springline™ units extends 1 1⁄4" (32) around the entire perimeter of the unit. It helps seal the unit to the structure.
D Circle, half circle, quarter circle, elliptical and oval windows are covered with a rigid vinyl cladding. Low-maintenance exterior cladding provides long-lasting* beauty.
E Rigid vinyl cladding on circle, half circle, quarter circle, elliptical and oval window frames forms a full-perimeter installation flange for securing the unit to the structure. It also helps maintain an attractive appearance while minimizing maintenance.
F Inside trim stop is made of unfinished pine. Arched trim stops are made with quality, full-length laminated pine. Units are shipped with the trim stops tacked on, so removal is easy — expediting finishing and joining procedures.
G Unfinished interior wood glazing stops help secure the glass in place. Arched glazing stops are made with full-length laminated pine.
Glass H High-performance glass options include: • Low-E4® glass® • Low-E4® HeatLock™ glass • Low-E4® Sun glass • Low-E4® SmartSun™ glass • Low-E4® SmartSun™ HeatLock™ glass Tempered glass and other glass options are available. Contact your Andersen supplier. A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite. Patterned Glass Patterned glass options are available. See page 10 for more details.
Specialty windows are available with Stormwatch® protection. For a copy of the Andersen® Coastal Product Guide go to andersenwindows.com/coastal or contact your Andersen supplier.
Flexiframe® Window
* Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 400 Series Limited Warranty. Dimensions in parentheses are in millimeters. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
122
Springline™ Window
Circle/Oval Window
ACCESSORIES Sold Separately Frame
Casing
Plinth Blocks
Glass
Extension Jambs
Interior Arch Casing
Andersen ® Art Glass
Specify extension jambs when ordering.
Available in Colonial or Ranch styles. Arch casings come with transition blocks or plinth blocks, depending on the product. For easy integration and consistency, casing dimensions are consistent with Wood Moulding and Millwork Producers Association specifications. Available in pine, oak and maple.
For enhancing casing transitions. Decorated with a radial sunburst, or use the reverse side flush face.
Pine extension jambs are available for most products in 1⁄16" (1.5) increments between 4 9⁄16" (116) and 7 1⁄8" (181). Elliptical and double-hung half circle extension jambs are available between 5 1⁄16" (129) and 7 1⁄8" (181). Some sizes may be pine veneer.
Extension Jamb Alignment for Joined Combinations When joining 400 Series arch, Springline™ or Flexiframe® over casement or when joining arch, Springline or Flexiframe alongside awning, use Method A or Method B for extension jamb alignment. See page 139 for details.
Grilles are available in a variety of configurations and widths. For specialty window grille patterns, see pages 126 and 136.
Exterior Trim Select specialty windows are available with Andersen® Exterior Trim. Contact your Andersen supplier for details.
2 1⁄4" (57) Colonial style. WM366
CAUTION:
2 1⁄2" (64) Colonial style. WM351
Method A: Individually Framed
For half circle, circle, elliptical and oval windows, use 2 7⁄8" (73) size pinth block with 2 1⁄4" (57) and 2 1⁄2" (64) casing. Use 3 7⁄8" (98) size with 3 1⁄2" (89) casing. Key Block
Specify Andersen® auxiliary extension jambs. Available for the following wall thicknesses: • 4 9⁄16" (116) • 5 1⁄4" (133) • 6 9⁄16" (167) • 7 1⁄8" (181)
Grilles For arch windows, use 2 7⁄8" (73) x 4" (102) size plinth block with 2 1⁄4" (57) and 2 1⁄2" (64) casing. Use 3 7⁄8" (98) x 5 1⁄4" (133) size with 3 1⁄2" (89) casing.
Springline™ window extension jambs and transition blocks are applied when ordered with the unit (key component block is also applied to units with a 48" (1219) radius).
Andersen art glass panels come in a variety of original patterns, including four Frank Lloyd Wright ® Series designs. See pages 213-214 for details on Andersen art glass. Visit andersenwindows.com/artglass for details and pattern information.
3 1⁄2" (89) Colonial style. WM444
Method B: Perimeter Framed
Excellent for creating unique trim designs or accents at arch casing transitions. A key block is an option for circle and oval windows.
Specify 1⁄4" (6) filler in pine or White. Requires modification of extension jambs.
2 1/4" (57) Ranch style. WM324 2 1/2" (64) Ranch style. WM315
• Painting and staining may cause damage to rigid vinyl. • 400 Series windows in Terratone color may be painted any color lighter than Terratone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Terratone any color darker than Terratone. • Do not paint 400 Series windows with White, Canvas, Sandtone, Forest Green, Dark Bronze or Black exterior colors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
Transition Blocks
Two transition blocks come with the interior arch casing extension jambs, providing a beautiful accent for circle and oval windows.
For more information about glass, patterned glass, art glass and grilles see pages 10-17. For more information about combination designs, product performance, installation accessories and warranty see pages 255-291 or visit
andersenwindows.com
Dimensions in parentheses are in millimeters. “Frank Lloyd Wright” is a registered trademark of the Frank Lloyd Wright Foundation.
123
400 Series Specialty Windows
Standard unit jamb depth is 2 7⁄8" (73), except for elliptical and double-hung half circle units, which are 4 1⁄2" (114).
SPECIALTY WINDOWS Table of Half Circle and Eyebrow Window Sizes — Double-Hung Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96
2'-2 1 ⁄8" (664)
2'-6 1 ⁄ 8" (765)
2'-10 1 ⁄ 8" (867)
3'-2 1 ⁄ 8" (968)
3'-6 1 ⁄ 8" (1070)
24 3 ⁄ 8" (619) 14 13 ⁄ 16" (376)
28 3 ⁄ 8" (721) 16 13 ⁄ 16" (427)
32 3 ⁄ 8" (822) 18 13 ⁄ 16" (478)
36 3 ⁄ 8" (924) 20 13 ⁄ 16" (529)
FCD28
30210, 3032, 3036, 30310, 3042, 3046, 30410, 3052, 3056, 30510, 3062, 3072, 3076
7 5 ⁄ 16" (186)
1'-0 5 ⁄ 8" (321)
32 7 ⁄ 16" (824) 24"(610)
1'-0 1 ⁄ 16" (306)
CTN34
26 1 ⁄ 8" (664) 24"(610)
28210, 2832, 2836, 28310, 2842, 2846, 28410, 2852, 2856, 28510, 2862, 2872, 2876
24210, 2432, 2436, 24310, 2442, 2446, 24410, 2452, 2456, 24510, 2462, 2472, 2476
20210, 2032, 2036, 20310, 2042, 2046, 20410, 2052, 2056, 20510, 2062, 2072, 2076
16 3 ⁄ 16" (411) CTN30
24 7 ⁄ 8" (632) 18 3 ⁄ 4" (476)
5 3 ⁄4" (146)
11" (279)
10 7 ⁄ 16" (265)
Radius
CTN28
4 3 ⁄ 8" (111)
Unobstructed Glass (Eyebrow)
9 5 ⁄ 8" (244)
CTN24
9 1 ⁄ 8" (232)
CTN20
14 3 ⁄ 16" (360)
12 3 ⁄ 16" (310)
1'-5 3 ⁄4" (451)
1'-5 3 ⁄ 16" (437)
20 3 ⁄ 8" (518) 12 13 ⁄ 16" (325)
10 3 ⁄ 16" (259)
1'-3 3 ⁄4" (400)
1'-3 3 ⁄ 16" (386)
Unobstructed Glass (Half Circle) Radius
18 3 ⁄ 16" (462)
Minimum Rough Opening
1'-11 3 ⁄4" (603)
3'-5 5 ⁄ 8" (1057)
1'-11 3 ⁄ 16" (589)
3'-1 5 ⁄ 8" (956)
1'-9 3 ⁄4" (552)
2'-9 5 ⁄ 8" (854)
1'-9 3 ⁄ 16" (538)
2'-5 5 ⁄ 8" (752)
1'-7 3 ⁄4" (502)
2'-1 5 ⁄ 8" (651)
1'-7 3 ⁄ 16" (487)
Window Dimension
FCD34
FCD30
34210, 3432, 3436, 34310, 3442, 3446, 34410, 3452, 3456, 34510, 3462, 3472, 3476
Table of Half Circle, Quarter Circle and Eyebrow Window Sizes — Casement/Awning
Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96
4'-0 1 ⁄ 2" (1232)
Unobstructed Glass (Half & Quarter Circle) Radius
19 1 ⁄ 2" (495) 12 1 ⁄ 16" (306)
23 3 ⁄4" (603) 14 3 ⁄ 16" (360)
26 7 ⁄ 8" (683) 15 3 ⁄4" (400)
31 5 ⁄ 16" (795) 18"* (457)
43 3 ⁄ 8" (1102) 24" (610)
31 5 ⁄ 16" (795)
3'-0 1 ⁄ 2" (927)
CTC2
CTQA3
6" (152)
35 7 ⁄ 8" (911) 32 1 ⁄ 4" (819) 11 1 ⁄4" (286)
8 11 ⁄ 16" (221)
Radius
28 15 ⁄ 16" (735) 18 3 ⁄ 4" (476) 10 11 ⁄ 16" (271)
Unobstructed Glass (Eyebrow) 1'-1 7 ⁄ 8" (352)
CTQCX1 CX125, CX13, CX135, CX14, CX145, CX15, CX155, CX16, CTR2810, AR281, AN281, A281, AW281, AX281, AXW281
2'-11 15 ⁄ 16" (913)
26 7 ⁄ 8" (683)
35 13 ⁄ 16" (910)
2'-8" (813)
CTCXW1
31 3 ⁄ 8" (797)
CTQCW1 CW12, CW125, CW13, CW135, CW14, CW145, CW15, CW155, CW16, CTR2410, AR251, AN251, A251, AW251, AX251
15 5 ⁄ 8" (397)
13 7 ⁄ 16" (341)
1'-6 " (458)
CTCX1
28 1 ⁄4" (718)
1'-1 3 ⁄ 8" (340)
CTQC1 C12, C125, C13, C135, C14, C145, C15, C155, C16, CTR2010, AR21, AN21, A21, AW21, A212, A213
CTCW1
23 3 ⁄4" (603)
2'-4 7 ⁄ 8" (733)
19 1 ⁄ 2" (495)
2'-0 5 ⁄ 8" (625)
2'-0 1 ⁄ 8" (613)
2'-4 3 ⁄ 8" (721)
24" (610)
2'-7 1 ⁄ 2" (800)
9 3 ⁄4" (248) CTC1
Radius
21 11 ⁄ 16" (551)
3'-0 1 ⁄ 2" (927)
2'-2 7 ⁄ 8" (683)
2'-8" (813)
2'-2 5 ⁄ 16" (668)
2'-4 7 ⁄ 8" (733)
1'-8 3 ⁄4" (527)
2'-0 5 ⁄ 8" (625)
1'-8 1 ⁄4" (514)
Minimum Rough Opening
1'-6 1 ⁄ 2" (470)
4'-0" (1219)
11 7 ⁄ 8" (302)
2'-11 15 ⁄ 16" (913)
1'-5" (432)
2'-7 1 ⁄ 2" (800)
1'-4 1 ⁄ 2" (419)
2'-4 3 ⁄ 8" (721)
1'-2 7 ⁄ 8" (378)
2'-0 1 ⁄ 8" (613)
1'-2 3 ⁄ 8" (365)
Window Dimension
FCC2
FCCXW3
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. *Actual radius of 17 31 ⁄ 32" (456).
124
CXW13, CXW135, CXW14, CXW145, CXW15, CXW155, CXW16, CTR3010, PTR3010, P3030, P3035, P3040, P3045, P3050, P3055, P3060, AR31, AN31, A31, AW31, AX31, AXW31, A335, A312, AXW312, A313, AP32V, PA3050, PA3060
C22, C225, C23, C235, C24, C245, C25, C255, C26, CTR4010, CTR22010, PTR4010, AR41, AN41, A41, AW41, AX41, AXW41, AR221, AN221, A221, AW221, P4030, P4035, P4040, P4045, P4050, P4055, P4060, AP24V, PA4060
3'-9 5 ⁄ 8" (1159)
5'-7 5 ⁄ 16" (1710)
6'-3 5 ⁄ 16" (1913)
3'-10 1 ⁄ 8" (1172)
5'-7 7 ⁄ 8" (1724)
6'-3 7 ⁄ 8" (1927)
62 1 ⁄ 16" (1576) 33 11 ⁄ 16"* (856)
70 1 ⁄ 16" (1780) 37 11 ⁄ 16"** (957)
Compatible double-hung, casement, awning and picture windows are
FCD38
3'-4 1 ⁄ 2" (1029)
3'-4" (1016)
31" (787)
34 1 ⁄4" (870)
CTN30-2
Double-Hung Half Circle Window Area Specifications
4'-9" (1448)
5'-3 1 ⁄4" (1607)
6'-0 3 ⁄ 8" (1838)
51 7 ⁄ 8"
58 1 ⁄ 8"
67 1 ⁄4"
(1318) 28 1 ⁄4" (718)
(1476) 31 3 ⁄ 8" (797)
(1708) 35 15 ⁄ 16" (913)
2'-9 5 ⁄ 8" (854)
29" (737)
CTC3
CTCX2 C32, C325, C33, C335, C34, C345, C35, CTR6010, CTR32010, PTR6010, AR61, AN61, A61, AW61, AX61, AXW61, AR321, AN321, A321, AW321, P6030, P6035, P6040, P6045, P6050
9" (274)
47 7 ⁄ 8" (1216) 36" (914)
33 5 ⁄ 8" (854)
(1826)
3'-2 3 ⁄4" (984)
(1594)
3'-2 1 ⁄4" (972)
(1435)
2'-10 1 ⁄ 8" (967)
5'-11 7 ⁄ 8"
CX23, CX235, CX24, CX245, CX25, CTR5210, CTR22810, AR2281, AN2281, A2281, AW2281, AX2281, AXW2281
1'-2 1 ⁄4" (362)
30210-2, 3032-2, 3036-2, 30310-2, 3042-2, 3046-2, 30410-2, 3052-2, 3056-2, 30510-2, 3062-2, 3072-2, 3076-2
5'-2 3 ⁄4"
CTCW2
1'-1 11 ⁄ 16" (348)
CTN28-2
4'-8 1 ⁄ 2"
25 15 ⁄ 16" (659)
2'-7 1 ⁄ 8" (791)
2'-6 9 ⁄ 16" (776)
38210, 3832, 3836, 38310, 3842, 3846, 38410, 3852, 3856, 38510, 3862, 3872, 3876
28210-2, 2832-2, 2836-2, 28310-2, 2842-2, 2846-2, 28410-2, 2852-2, 2856-2, 28510-2, 2862-2, 2872-2, 2876-2
patterns shown on page 126.
CW22, CW225, CW23, CW235, CW24, CW245, CW25, CW255, CW26, CTR4810, CTR22410, AR2251, AN2251, A2251, AW2251, AX2251
FCCW2
Compatible double-hung, casement, awning and picture windows are shown below shaped windows. Grille patterns shown on page 126.
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. *Actual radius of 33 21 ⁄ 32" (855). **Actual radius of 37 21 ⁄ 32" (956).
Window Number
Glass Area Sq.Ft./(m2)
CTN20
1.1
(0.10)
CTN24
1.6
(0.15)
CTN28
2.2
(0.20)
CTN30
2.8
(0.26)
CTN34
3.6
(0.34)
CTN28-2
10.5
(0.98)
CTN30-2
13.4
(1.25)
Eyebrow Window Area Specifications Window Number
Glass Area Sq.Ft./(m2)
FCD28
0.69
(0.06)
FCD30
0.54
(0.05)
FCD34
1.15
(0.11)
FCD38
0.84
(0.08)
FCCXW3
1.24
(0.12)
FCC2
1.02
(0.09)
FCCW2
2.78
(0.26)
Casement Half Circle Window Area Specifications Window Number
Glass Area Sq.Ft./(m2)
CTC1
1.0
(0.09)
CTCW1
1.5
(0.14)
CTCXW1
2.7
(0.25)
CTC2
5.1
(0.47)
CTCW2
7.3
(0.68)
CTC3
12.3
(1.14)
CTCX1
2.0
(0.19)
CTCX2
9.3
(0.86)
Quarter Circle Window Area Specifications Window Number
Glass Area Sq.Ft./(m2)
CTQC1
1.9
(0.18)
CTQCW1
3.0
(0.28)
CTQA3
5.2
(0.48)
CTQCX1
3.8
(0.35)
• Dimensions in parentheses are in square meters.
125
400 Series Specialty Windows
4 3 ⁄4" (121)
10" (254)
9 7 ⁄ 16" (240)
(824) 32 1 ⁄4" (819)
3'-0 1 ⁄ 2" (927)
3'-0" (914)
shown below shaped windows. Grille 32 7 ⁄ 16"
SPECIALTY WINDOWS Table of Eyebrow Window Sizes — Patio Doors
Eyebrow Window Area Specifications
Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Window Dimension
4'-11 1 ⁄4" (1504)
5'-11 1 ⁄4" (1810)
Minimum Rough Opening
4'-11 3 ⁄4" (1518)
5'-11 3 ⁄4" (1822)
Unobstructed Glass
49 7 ⁄ 16" (1256)
59 11 ⁄16" (1516)
11 1 ⁄ 8" (283)
Compatible patio 1'-4 3 ⁄ 8" (416)
10 13 ⁄16" (275)
1'-4 1 ⁄ 8" (410)
1'-3 9 ⁄16" (395)
FCFW50
doors are shown FCFW60
below shaped windows. Grille
FWG6068, FWG60611, FWG6080, FWH6068, FWH60611, FWH6080, FWO6068, FWO60611, FWO6080, NLGD6068, NLGD60611, NLGD6080, ISPD6068, ISPD60611, ISPD6076, ISPD6080
FWG5068, FWG50611, FWG5080, FWH5068, FWH50611, FWH5080, FWO5068, FWO50611, FWO5080, NLGD5068, NLGD50611, NLGD5080, PS5068, ISPD5068, ISPD50611, ISPD5076, ISPD5080
patterns shown below.
Table of Elliptical Window Sizes — Patio Doors Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96
Glass Area Sq.Ft./(m2)
FCFW50
2.57
(0.24)
FCFW60
3.15
(0.29)
Elliptical Window Area Specifications
48" (1219) 1'-3 13 ⁄ 16" (402)
36" (914)
Radius
Window Number
Window Number
Glass Area Sq.Ft./(m2)
ET6
4.3
(0.40)
ET8
8.0
(0.74)
Circle & Oval Window Area Specifications Window Number
Glass Area Sq.Ft./(m2)
CIR20
2.1
(0.20)
CIR24
3.0
(0.28)
CIR30
5.2
(0.48)
OVL1824
1.9
(0.18)
OVL2030
3.2
(0.30)
OVL3048
8.7
(0.81)
Gothic & Octagon Window Area Specifications
6'-0" (1829)
8'-0" (2438)
Window Number
Glass Area Sq.Ft./(m2)
Unobstructed Glass
66 1 ⁄4"
90 1 ⁄4"
GT2036
4.01
(0.37)
(1683)
(2292)
GT2440
5.84
(0.54)
GT3046
8.78
(0.82)
GT4056
14.88
(1.38)
OC20
2.14
(0.20)
OC24
3.12
(0.29)
OC30
5.63
(0.52)
(302)
11 7 ⁄ 8"
1'-5 3 ⁄ 8" (441)
1'-4 3 ⁄4" (425)
16 1 ⁄ 8" (410)
Minimum Rough Opening
1'-9 5 ⁄ 8" (549)
7'-11 1 ⁄4" (2419)
1'-9" (533)
5'-11 1 ⁄4" (1810)
Window Dimension
ET6
ET8 FWG8068, FWG80611, FWG8080, FWH8068, FWH80611, FWH8080, NLGD8068, NLGD80611, NLGD8080
FWG6068, FWG60611, FWG6080, FWH6068, FWH60611, FWH6080, FWO6068, FWO60611, FWO6080, NLGD6068, NLGD60611, NLGD6080, ISID6068, ISID60611, ISID6076, ISID6080
Monumental Quarter Circle and Circle Area Specifications Window Number
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
Glass Area Sq.Ft./(m2)
QR40
9.91
(0.92)
FR40
10.22
(0.95)
FR60
24.69
(2.29)
• Dimensions in parentheses are in square meters.
Grille Patterns Renaissance
Colonial
Renaissance
Sunburst
Specialty window patterns may not align with picture window patterns when horizontally joined. Number of lights and overall
Eyebrow Circle Oval
Gothic
Octagon
Half Circle & Quarter Circle Elliptical
pattern varies with window size. Patterns are not available in all configurations. Specified equal light and custom patterns are also available. For more information on divided light see page 11 or visit andersenwindows.com/grilles.
Monumental Quarter Circle
Monumental Circle Custom Pattern Examples
126
Key B
Dowe
Key C
Table of Circle Window Sizes
Table of Oval Window Sizes
Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96
Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96
2'-0 1 ⁄ 8"
2'-4 3 ⁄ 8"
2'-11 15 ⁄ 16"
(613)
(721)
(913)
Minimum Rough Opening
2'-0 5 ⁄8" (625)
2'-4 7 ⁄ 8" (733)
Unobstructed Glass
19 3 ⁄4" (502)
24" (610)
Minimum Rough Opening
1'-8 1 ⁄4" (514)
2'-0 1 ⁄ 2" (622)
3'-0 1 ⁄ 2" (927)
31 9 ⁄ 16" (802)
Unobstructed Glass
15 3 ⁄ 8" (391)
19 3 ⁄ 8" (492)
31 3 ⁄ 8" (797)
31 9 ⁄ 16" (802)
3'-0 1 ⁄ 2" (927)
24" (610) OVL1824
52 1 ⁄ 8" (1324)
3'-0 1 ⁄ 2" (927)
4'-9" (1448)
3'-0" (914)
4'-8 1 ⁄ 2" (1435)
2'-0" (610)
2'-11 15 ⁄ 16" (913)
1'-7 3 ⁄4" (502)
2'-4 7 ⁄ 8" (733)
Window Dimension
2'-4 3 ⁄ 8" (721)
Window Dimension
OVL3048
OVL2030
Oval windows can vertically or horizontally.
Key Block
Dowel
OVL1824
400 Series Specialty Windows
be installed either OVL2418
Circle, oval, gothic, octagon and monumental Each Andersen key block kit includes two
specifications shown on page 126. Grille patterns
key blocks and two key components.
shown on page 126.
®
Key Component
nent
Table of Gothic Window Sizes Scale 1 ⁄ 8" = 1'-0" (1:96)
4'-0" (1219)
Minimum Rough Opening
2'-0 5 ⁄ 8" (625)
2'-4 7 ⁄ 8" (733)
3'-0 1 ⁄ 2" (927)
4'-0 1 ⁄ 2" (1232)
Unobstructed Glass
19 7 ⁄ 16" (495)
23 11 ⁄ 16" (602)
31 1 ⁄4" (794)
43 5 ⁄ 16" (110)
Radius
32 1 ⁄4" (819)
24 7 ⁄ 16" (621)
60 7 ⁄ 8" (1548)
5'-6 1 ⁄ 2" (1689)
5'-6" (1676)
48 7 ⁄ 8" (1241)
(1384)
22 27 ⁄ 32" (580)
GT3046
Window Dimension
4'-0" (1219)
4'-0" (1219)
6'-0" (1829)
3'-0 1 ⁄ 2" (927)
Minimum Rough Opening
4'-0 1 ⁄ 2" (1232)
4'-0 1 ⁄ 2" (1232)
6'-0 1 ⁄ 2" (1842)
31 5 ⁄ 16" (795)
Unobstructed Glass
43 1 ⁄4" (1099)
43 5 ⁄ 16" (1100)
67 5 ⁄ 16" (1710)
2'-0" (610)
2'-4" (711)
3'-0" (914)
Minimum Rough Opening
2'-0 1 ⁄ 2" (622)
2'-4 1 ⁄ 2" (724)
Unobstructed Glass
19 5 ⁄ 16" (491)
23 5 ⁄ 16" (592)
Radius
OC24
4'-6 1 ⁄ 2"
4'-6" (1372) GT2440
GT4056
Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96
Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96
OC20
48" (1219)
36" (914)
Table of Monumental Quarter Circle & Circle Window Sizes
Table of Octagon Window Sizes Window Dimension
21 9 ⁄ 32" (541)
GT2036
42 3 ⁄4" (1086)
4'-0 1 ⁄ 2" (1032)
32 1 ⁄4" (819)
4'-0" (1219)
16 27 ⁄ 32" (428)
Shoulder Height
2'-11 15 ⁄ 16" (913)
36 9 ⁄ 16" (929)
2'-4 3 ⁄ 8" (721)
3'-6 1 ⁄ 2" (1080)
2'-0 1 ⁄ 8" (613)
3'-6" (1067)
Window Dimension
48" (1219)
24" (610)
36" (914)
OC30
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
QR40
FR40
FR60
127
SPECIALTY WINDOWS
SillSill SillSill Vertical Section
Jamb Jamb Jamb Jamb
Min. Rough Opening Height Min. Rough Opening Height Unit Dimension Height Unit Dimension Height
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Jamb Jamb Jamb Dimension Width Jamb UnitUnit Dimension Width 1 ⁄ 4"1 ⁄(6) 4" (6) Dimension Width UnitUnit Dimension Width 1 ⁄ 4"1 ⁄ (6) Min. Rough Opening Width 1 ⁄ 4"1 ⁄ (6) 4" (6) Min. Rough Opening Width 4" (6) Min. Rough Opening Width Min. Rough Opening Width
Head Head
SillSill SillSill
Sill Sill
Vertical Section
Jamb Jamb Jamb Jamb
Jamb Jamb Jamb Jamb Dimension Width Unit UnitUnit Dimension Width Jamb Jamb Dimension Width 1 ⁄ 4"1 ⁄(6) 1 ⁄ 4" (6) 4" (6) Dimension Width Unit UnitUnit Dimension Width Dimension Width 1 ⁄ 4"1 ⁄ (6) 1 ⁄ 4" (6) Min. Rough Opening Width 4" (6) Min. Rough Opening Width 4" (6) Min.1Rough Opening Width ⁄ 4"1 ⁄ (6) Min. Rough Opening WidthMin. Rough Opening Width Min. Rough Opening Width
Head Head Head Head
Unit Dimension Height
Unit Dimension Height
Min. Rough Opening Height
Min. Rough Opening Height
Unit Dimension Height
Unit Dimension Height
Min. Rough Opening Height
Jamb Jamb 1 ⁄ 4" (6) 1 ⁄ 4" (6)
Octagon Window Details
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
F D b
Flexible Drip Cap Flexible byDrip Others Cap by Others
Head Head Head Head Head Head
Head Head
SillSill Sill SillSill Sill
Sill Sill
Jamb Jamb JambJamb Jamb JambJamb UnitUnit Dimension Width Dimension Width Jamb
JambJamb Jamb Jamb Jamb Jamb
Jamb1 Jamb Width Unit1Dimension Width Unit Dimension 1 ⁄ 4" (6) 1 ⁄ 4"1(6) ⁄ 4" ⁄ 4(6) ⁄ 4"1 ⁄(6) 4" (6)1 ⁄ 4" (6) " (6) Dimension WidthWidth UnitUnit Dimension Width Unit Dimension Width Unit Dimension 1"⁄ 4(6) 1 ⁄ 4"1 ⁄ (6) 1Opening 1 ⁄4 Min. Rough Width 41"⁄ 4(6) Rough Opening Minimum Rough Opening 4"Opening (6) 1 ⁄ 4"Width " (6)Min. (6) "1 ⁄ (6) ⁄ 4" (6)Width Min. Width Rough
Min. Rough Opening Width Minimum Rough Opening Width Opening Width Min. Rough Opening Width Min. Rough
Flexible Drip Cap Flexible byDrip Others Cap by Others
in. Rough Opening Height Rough Opening Height Unit Dimension Height it Dimension Height
Rough Opening Height in. Rough Opening Height Rough Opening Height in. Rough Opening Height itUnit Dimension Height Dimension Height itUnit Dimension Height Dimension Height
Rough Opening Height in. Rough Opening Height Rough Opening Height in. Rough Opening Height itUnit Dimension Height Dimension Height itUnit Dimension Height Dimension Height
Sill
Sill
• Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
128
2 1 ⁄ 8" (54)
Horizontal Section
Horizontal Section
Flexible Flexible Drip Drip CapCap Flexible Flexible by Others by Drip Others Cap Drip Cap • 4 9/16" (116) jamb depth measurement is from backside of installation flange. by by Others Others
Head Head Head Head
® ® AndersenAndersen ExtensionExtension Head Jambs Jambs
Vertical Section
1 ⁄ 4"1 ⁄(6) 4" (6)
Horizontal Section
Sill
Flexible Flexible Drip Drip CapCap Flexible Flexible by Others by Drip Others Cap Drip Cap Others by by Others
Flexible Drip Cap Flexible byDrip Others Cap by Others
Head Head Head Head
4 9 ⁄ 16" (116) 1 5 ⁄ 16" 1 Jamb Depth (33) Flexible Flexible Drip Cap Drip Cap by Othersby Others 2 1 ⁄ 4" (57)
2 1 ⁄ 8" (54)
Head Head
in. Rough Opening Height Rough Opening Height Unit Dimension Height it Dimension Height
Head Head Head Head
2 1 ⁄ 4" (57)
2 1 ⁄ 4" (57)
Vertical Section Jamb Jamb Unit Dimension Width 1 ⁄ 4" (6) Unit Dimension Width 1 ⁄ 4" (6) Min. Rough Opening Width Min. Rough Opening Width
Gothic Window Details Flexible Flexible Drip Drip CapCap Flexible Flexible by Others by Drip Others Cap Drip Cap Others by by Others
Sill Sill
Andersen® Extension Head Head Jambs
Sill
Sill
Vertical Section
Min.Min. Rough Opening Height Rough Opening Height Min.Min. Rough Opening Height Rough Opening Height UnitUnit Dimension Height Dimension Height UnitUnit Dimension Height Dimension Height
Min.Min. Rough Opening Height Rough Opening Height Min.Min. Rough Opening Height Rough Opening Height UnitUnit Dimension Height Dimension Height UnitUnit Dimension Height Dimension Height
Flexible Flexible Drip Drip CapCap Flexible Flexible by Others by Drip Others Cap Drip Cap Others by by Others
2 1 ⁄ 4" (57)
2 1 ⁄ 4" (57)
Min. Rough Opening Height Min. Rough Opening Height Unit Dimension Height Unit Dimension Height
Sill
2 1 ⁄ 4" (57)
® ® AndersenAndersen ExtensionExtensionHead Jambs Jambs
2 1 ⁄ 4" (57)
Min. Rough Opening Height Min. Rough Opening Height Unit Dimension Height Unit Dimension Height
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Head
Head Head
4 9 ⁄ 16" (116) 5 4 9 ⁄ 16" (116) 4 9 ⁄ 16" (116) 1 ⁄ 16" 1 5 ⁄ 16" 1 5 ⁄ 16" Jamb Depth (33) Jamb Depth (33) (33) Jamb Depth Flexible Flexible Flexible Drip Cap Drip Cap Drip Cap by Others by Othersby Others Min. Rough Opening Height
Head
Unit Dimension Height
2 1 ⁄ 4" (57)
Sill Vertical Section
Eyebrow Window Details
Min. Rough Opening Height
2 3 ⁄ 8" (60)
Unit Dimension Height
Head
Unit Dimension Height
2 5 ⁄ 8" (67)
1 ⁄ 4"1 ⁄(6) 4" (6)
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
4 9 ⁄ 16" (116) 4 9 ⁄ 16" (116) 5 1 ⁄ 16" 1 5 ⁄ 16" 1 5 ⁄ 16" Jamb Depth Jamb Depth (33) (33) (33) Flexible Flexible Flexible Drip Cap Drip Cap Drip Cap by Others by Othersby Others Min. Rough Opening Height
2" (51)
4 1 ⁄ 2" (114)
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Min. Rough Opening Height
2 1 ⁄ 2" (64)
Unit Dimension Height
Min. Rough Opening Height
Flexible Drip Cap by Others
1 5 ⁄ 16" (33)
F D b
Casement/Awning Quarter Circle Window Detail
Min. Rough Opening Height
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Casement/Awning Half Circle Window Detail
Min.Min. Rough Opening Height Rough Opening Height Min.Min. Rough Opening Height Rough Opening Height Min. Rough Opening Height UnitRough Dimension Height Unit Dimension Height Min. Opening Height UnitUnit Dimension Height Dimension Height Unit Dimension Height Unit Dimension Height
Double-Hung Half Circle Window Detail
Flexible Drip Cap Flexible byDrip Others Cap by Others
Head Head
Jamb Jamb (6) 1 ⁄ 4" (6
1 ⁄ 4"
2" (51)
Sill
Sill
Andersen® Key Block ®
Standard Andersen Sill Transition Block Sill
Andersen® Extension Jambs and Transition Block Andersen® Interior Arch Casing and Transition Block
Monumental Circle Window Details
Flexible Drip Cap Flexible byDrip Others Cap by Others
Flexible Drip Cap Flexible byDrip Others Cap by Others
Sill Sill
Head Head
Sill Sill
Sill Sill
Dimension Height UnitUnit Dimension Height
Head Head
Horizontal Section
Andersen® Key Block
Dimension Height UnitUnit Dimension Height
Andersen® Key Block
Head
® Sill Standard Andersen Standard And Transition Blo SillTransition Block Head
Andersen® Extension Andersen® Ex Jambs and Jambs and Transition Blo Transition Block Andersen® Interior Arch Casing and Transition Block Sill
Vertical JambSection Jamb Unit Dimension Width 1 ⁄ 4" (6) Unit Dimension Width 1 ⁄ 4" (6) Min. Rough Opening Width Min. Rough Opening Width
Jamb Jamb
Head Head
Vertical Section
Jamb Jamb 1 ⁄ 4" (6) 1 ⁄ 4" (6)
Jamb Jamb
1 ⁄ 4" (6) 1 ⁄ 4" (6)
Unit Dimension Width Unit Dimension Width Min. Rough Opening Width Min. Rough Opening Width
Andersen® Int Arch Casing a Transition Blo
1 ⁄ 4" (6) 1 ⁄ 4" (6)
Sill Sill
Vertical Section
b Jamb Jamb Jamb Jamb Jamb mb Jamb Width Unit Dimension Jamb Width Jamb Unit Dimension 1 ⁄ 4" (6) 1 ⁄ 4Width 1 ⁄ 4" (6) 1 ⁄ 4" (6) Unit Dimension 6) " (6) Unit Dimension Width DimensionUnit Width Dimension 1 ⁄ 4Unit 1 ⁄ 4Width "Rough (6) 1Opening ⁄ 4Minimum (6) Min. Rough1Opening ⁄ 4" (6) Width " (6) Width Min. Rough Opening " (6)Width Minimum Rough Opening Width Min. Rough Opening Width Min. Rough Opening Width
Head ⁄ 16" (116) 4 9Head Jamb Depth
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Min. Rough Opening Height Min. Rough Opening Height
Dimension Height UnitUnit Dimension Height
Head Head
Min. Rough Opening Height Min. Rough Opening Height
Min. Rough Opening Height Min. Rough Opening Height Unit Dimension Height Unit Dimension Height
Unit Dimension Height Unit Dimension Height
Jamb Jamb 1 ⁄ 4" (6) 1 ⁄ 4" (6)
Monumental Quarter Circle Window Details Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
⁄ 16" 4 9 ⁄ 161" 5(116) Jamb (33) Depth Flexible Drip Cap by Others
Sill
Vertical Section Vertical JambJamb b Jamb Section Jamb Jamb Jamb Jamb Unit Dimension Width Jamb Jamb mb Unit Dimension Width1 Jamb1 Jamb Unit Dimension Width 1 Jamb Unit Dimension Width 1 ⁄ 4" (6) 1 ⁄ 4" (6) 6) ⁄ 4" (6) ⁄ 4" (6) Unit Dimension Width ⁄ 4" (6)1 ⁄ 4" (6) Unit Dimension Width Unit Dimension Width Unit Dimension Width 1 ⁄ 4" (6) 1 ⁄Min. 1 ⁄ 4" (6) Min. Rough Opening Width 4" (6)Rough Opening Width (6) Min. Rough Opening Width1 ⁄ 4" (6) 1 ⁄ 4"Min. (6) Rough Opening Width 1 ⁄ 4" (6) Min. Rough Opening Width Min. Rough Opening Width Min. Rough Opening Width Min. Rough Opening Width
ple rs Cap hers
1 5 ⁄ 16" (33) Flexible Drip Cap by Others
® Standard Andersen 2 5 ⁄ 8" 8" 2 5 ⁄ 8" 2 5 ⁄ Sill Transition Block (67) (67) (67) Sill Head Head Head Andersen® Extension Jambs and Transition Block 2 3 ⁄ 8" 2 3 ⁄ 8" 2 3 ⁄ 8" (60) (60) (60) Andersen® Interior Arch Casing and Transition Block Sill Sill Sill
Min. Rough Opening Height Min. Rough Opening Height
Head Head
Minimum Rough Opening Height
Head
Min. RoughRough Opening HeightHeight Minimum Opening Unit Dimension Height Unit Dimension Height
Head
Sill
Sill
Unit Dimension Height
Unit Dimension Height
Sill 2 1 ⁄ 2" Sill (64)
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
400 Series Specialty Windows
Sill
2" (51)
Head
Minimum Rough Opening Height
2" (51)
Unit Dimension Height
Head
Unit Dimension Height
sen® sion Head s
2 1 ⁄ 2" (64)
Head 5 Head 1 ⁄ 16" (33)
Min. Rough Opening Height
Min. Rough Opening Height
Sill 2 1 ⁄ 2" Sill(64)
Min. Rough Opening Height
Head ⁄ 16" Head 4 9 ⁄ 16" (116) 4 9 ⁄ 161" 5(116) Jamb Depth Jamb (33) Depth 1 ⁄ 2" (114) 1 ⁄ 2" (114) 4 4 1 ⁄ 2" (114)Flexible 4 1 ⁄ 25" (114) 5 4Flexible 4 1 ⁄ 2" (114) 4 1 ⁄ 2" (114) 5 ⁄ 16" 1 5Cap 1 ⁄ 16" 1 ⁄ 16"Drip Cap 1 ⁄ 16" Drip (33) (33) (33) by Others (33) Flexibleby Others Flexible Flexible Flexible Drip Cap Drip Cap Drip Cap Drip Cap Andersen® by Others by Others by Othersby Others Key Block Head Head
Oval Window Detail
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Unit Dimension Height
Dimension Height UnitUnit Dimension Height
Circle Window Detail
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Unit Dimension Height
Min. Rough Opening Height Min. Rough Opening Height
Min. Rough Opening Height Min. Rough Opening Height Unit Dimension Height Unit Dimension Height
Dimension Height UnitUnit Dimension Height
Elliptical Window Detail
Flexible Drip Cap Flexible byDrip Others Cap by Others
Flexible Drip Cap Flexible byDrip Others Cap by Others
Minimum Rough Opening Height
Flexible Drip Cap Flexible byDrip Others Cap by Others
Flexible Drip Cap Flexible byDrip Others Cap by Others Min. Rough Opening Height Min. Rough Opening Height
Unit Dimension Height Unit Dimension Height
e ap ble ers Cap hers
Jamb Jamb
1 ⁄ 4" (6) 1 ⁄ 4" (6)
Horizontal Section
• 4 9/16" (116) jamb depth measurement is from backside of installation flange. • Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
129
SPECIALTY WINDOWS Horizontal (stack) Joining Details Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Casement Half Circle over Casement Window
Double-Hung Half Circle over Tilt-Wash Double-Hung Window
Overall Window Dimension Height
Overall Window Dimension Height
Sum of individual window heights plus 1 ⁄ 8" (3) for each join.
Sum of individual window heights plus 0" for each join.
Overall Rough Opening Height
Overall Rough Opening Height
Overall window dimension height plus 5 ⁄ 8" (16).
Overall window dimension height plus 3 ⁄ 8" (10). 1 ⁄ 8"
(3)
- 3 ⁄ 8" 1 ⁄ 8" (-10) (3)
8 1 ⁄ 4" (210) 4 7⁄ 8" 4 74⁄ 87" ⁄ 8" (124) (124) (124)
244577⁄⁄ 8⁄88"" 22527⁄ 8⁄ 58""⁄ 8" 2472⁄787⁄"8⁄ "8" 4 74⁄ 87"⁄ 8" (124) (124) (67) (73) (67) (73) (124) (124) (67) (73) (124)
1 ⁄ 81"⁄ 8"
(3)(3)
Vertical Section
Vertical Section
Elliptical Window over Frenchwood® Gliding Patio Door
Elliptical Window over Frenchwood® Hinged Inswing Patio Door
Overall Unit Dimension Height
Overall Unit Dimension Height
Sum of individual unit heights plus
3 ⁄ 8"
(10).
Overall Rough Opening Height Overall unit dimension height plus
Sum of individual unit heights plus 1 ⁄ 8" (3). Overall Rough Opening Height
5 ⁄ 8"
(16).
Overall unit dimension height plus 1" (25).
1 3⁄ 8⁄"8"
(10) (3) - 3 ⁄ 8" - 3 ⁄-83"⁄ 8" (-10) (-10) (-10)
8 78⁄ 161"⁄ 4" (214) (210) 4 7 ⁄ 8" 4 74⁄ 87"⁄ 8" (124) (124) (124)
3 1⁄ 8⁄ "8" (3) (10)
1 ⁄ 81"⁄ 8"
(3)(3)
Vertical Section
6 3 ⁄ 4" (171) 8 1 ⁄ 4" 8 18⁄ 41" ⁄ 4" (210) (210) (210)
Vertical Section
Elliptical Window over Perma-Shield® Gliding Patio Door Overall Unit Dimension Height Sum of individual unit heights plus 3 ⁄ 8" (10).
For more joining information see the combination designs section starting on page 255.
Overall Rough Opening Height Overall unit dimension height plus 5 ⁄ 8" (16).
3 ⁄ 83"⁄ 8" (10) (10)
3 ⁄ 83"⁄ 8" (10) (10)
6 3 ⁄ 4" 8 7 ⁄ 16" 8 78⁄ 167"⁄ 16" (171) (214) (214) (214)
3 ⁄ 8" (10)
3 ⁄ 83"⁄ 8" (10) (10)
6 3 ⁄ 4" 6 36⁄ 43" ⁄ 4" (171) (171) (171)
Vertical Section • Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. • Dimensions in parentheses are in millimeters.
130
Custom Arch Windows
Design Criteria Listed below are some factors that must be considered when deciding on a custom arch size and shape. For specific design criteria, joining guidelines and order information, contact your Andersen supplier.
Unequal Leg Arch
Partial Eyebrow
Andersen offers even greater design flexibility with customdimensioned equal leg arches, unequal leg arches and partial eyebrows. Custom arch windows can be designed using one of 10 standard radii, further expanding the existing line of 90 standard sizes of Andersen arch windows.
Springline™ Window Expressions
16' (4877) Radius for Combinations
• • • • • • • • • • • •
Do all calculations in inches to 3 decimal places Order extension jambs along with window for correct sizing All units are stationary Maximum standard glass area of 60 sq. ft. or 5.57 m2 Ten standard radii: 18 3 ⁄ 4" (476), 2' (610), 32 1 ⁄ 4" (819), 34 1 ⁄ 4" (870), 3' (914), 4' (1219), 5' (1524), 6' (1829), 8' (2438), 16' (4877)
400 Series Specialty Windows
Arch
Maximum radii: based on available radius piece length, contact supplier for specific information Maximum equal leg width: 36 3 ⁄ 4" (399) for 18 3 ⁄ 4" (476) radius to 12' (3658) for 16' (4877) radius Maximum unequal leg width: 18 3 ⁄ 4" (476) for 18 3 ⁄ 4" radius to 11'-2" (3404) for 16' (4877) radius Maximum partial eyebrow width: 18 3 ⁄ 4" (476) for 18 3 ⁄ 4" radius to 11'-5 1 ⁄ 2" (3493) for 16' (4877) radius Only one dimension, height or width can exceed 7'-0" (2134) No height dimension greater than 12'-0" (3658) No leg dimension less than 6" (152)
Custom arch shapes and sizes are specially constructed to be used in combination with other Andersen® windows including casement, awning, double-hung, gliding and Flexiframe®
7
6
5
4
3
2
1
FEET
1
2
3
4
5
6
7
windows and hinged or gliding patio doors. 18 3 ⁄ 4"R
Andersen grilles are available for most styles and sizes. Contact
2'R
your supplier for availability.
32 1 ⁄ 4"R 34 1 ⁄ 4"R 5'R 6'R 3'R 8'R 4'R
Colonial
Renaissance
16'R 18 3 ⁄ 4"R (3'-0 3 ⁄ 4") 2'R (3'-11 1 ⁄ 4") 32 1 ⁄ 4"R (5'-3 3 ⁄ 4") 34 1 ⁄ 4"R (5'-7 3 ⁄ 4") 3'R (5'-11 1 ⁄ 4) 4'R (7'-11 1 ⁄ 4") 5'R (5'-0") 6'R (6'-0 5 ⁄ 8") 8'R (8'-0 1 ⁄ 8") 16'R (12')
Standard Radii for Custom Arch Maximum Width for Equal Leg Arch
• Dimensions in parentheses are in millimeters.
131
132
AFC18
AFCW18
AFCW16
AFCP308
AFCP3055
AFCP306 AFC25
AFC255
AFC26
AFC28 AFCW235
AFCW24
AFCW245
AFCW25
AFCW255
AFCW26
AFCW28
4'-2 1 ⁄4" (1276)
AFCW23
4'-9 7 ⁄ 16" (1459)
3'-9 3 ⁄ 8" (1153)
3'-7 3 ⁄4" (1111)
2'-4 15 ⁄ 16" 1'-4 13 ⁄ 16" 10 13 ⁄ 16" 13 4 ⁄ 16" (735) (275) (122) (427)
1'-6 7 ⁄ 16" 1'-0 7 ⁄ 16" 6 7 ⁄ 16" (316) (164) (468)
1'-7 1 ⁄ 16" 1'-1 1 ⁄ 16" 7 1 ⁄ 16" (332) (179) (484)
2'-9 9 ⁄ 16" (852)
2'-7 15 ⁄ 16" 1'-7 13 ⁄ 16" 1'-1 13 ⁄ 16" 7 13 ⁄ 16" (811) (351) (198) (503)
2'-7 3 ⁄ 16" (792)
2'-6 9 ⁄ 16" (776)
AFCW22
5'-2 1 ⁄4" (1581)
4'-0 5 ⁄ 8" (1235)
3'-7" (1092)
9 1 ⁄4" 3 1 ⁄4" (235) (83)
(152)
2'-4 25 ⁄ 32" 1'-4 21 ⁄ 32" 10 21 ⁄ 32" 4 21 ⁄ 32" (731) (271) (118) (423)
AFCW21
5'-9 5 ⁄ 16" (1761)
AFC245
AFCW206
6'-2 1 ⁄4" (1886)
AFC24 4'-7 13 ⁄ 16" (1418)
AFC235
5'-0 5 ⁄ 8" (1540)
3'-11 7 ⁄ 8" (1216)
AFC23
5' (1524)
6'-9 5 ⁄ 16" (2065)
AFCP305 4'-7 1 ⁄ 16" (1399)
3'-6 3 ⁄ 8" (1076)
1'-3 1 ⁄4" (387)
(305)
Shoulder Height 12" 6"
5' (1524)
AFFW5006
AFFW501
AFFW508
1'-9 7 ⁄ 16" 1'-3 7 ⁄ 16" 9 7 ⁄ 16" (392) (240) (545)
Table of Arch Window Sizes
8'-9 9 ⁄ 16" (2681)
AFCW155 AFC22
5'-7 11 ⁄ 16" (1719)
AFCP3045
AFC21
6'-0 5 ⁄ 8" (1845)
AFCP304 4'-11 7 ⁄ 8" (1521)
AFCP3035
AFC206
6'-7 11 ⁄ 16" (2024)
AFCW15 3'-11 1 ⁄4" (1200)
AFCP303
5'-6 15 ⁄ 16" (1700)
AFCW145 4'-6 7 ⁄ 16" (1383)
3'-4 3 ⁄4" (1035)
3'-4 19 ⁄ 32" (1031)
(613)
2'-3 3 ⁄ 8" (695)
AFCP302
5'-11 7 ⁄ 8" (1826)
AFCW14 4'-11 1 ⁄4" (1505)
AFCW135
5'-6 5 ⁄ 16" (1684)
AFCW13 AFCP301
4' (1219)
8'-7 15 ⁄ 16" (2640)
AFC16 AFCP3006
6'-6 15 ⁄ 16" (2005)
AFC15 3'-9 5 ⁄ 8" (1159)
3'-9 15 ⁄ 32" (1155)
(913)
3'-3 3 ⁄ 16" (995)
2'-0 1 ⁄ 8"
AFCW12
3' (914)
8'-7 3 ⁄ 16" (2621)
AFC155 AFCW11
5'-11 1 ⁄4" (1810)
AFC145 AFCW106
6'-6 5 ⁄ 16" (1989)
AFC14 2' (610)
8'-6 9 ⁄ 16" (2605)
AFC135
4'-4 13 ⁄ 16" (1341)
4'-4 21 ⁄ 32" (1337)
(1037)
3'-8 1 ⁄ 16" (1119) AFC13
4'-9 5 ⁄ 8" (1464)
4'-9 15 ⁄ 32" (1460)
4'-3 1 ⁄4" (1302)
(1219)
2'-11 15 ⁄ 16"
AFC12
5'-4 11 ⁄ 16" (1643)
5'-4 17 ⁄ 32" (1639)
(1341)
4'-8 1 ⁄ 16" (1424)
3'-4 13 ⁄ 16"
AFC11
5'-9 5 ⁄ 8" (1768)
5'-9 15 ⁄ 32" (1765)
(1521)
5'-3 1 ⁄ 8" (1603)
4'-0"
AFC106
6'-4 11 ⁄ 16" (1948)
6'-4 17 ⁄ 32" (1944)
(1646)
5'-8 1 ⁄ 16" (1729)
4'-4 13 ⁄ 16"
2' (610)
8'-4 15 ⁄ 16" (2564)
8'-4 25 ⁄ 32" (2560)
(1826)
4'-11 7 ⁄ 8"
Chord Height
6'-3 1 ⁄ 8" (1908)
5'-4 13 ⁄ 16"
Radius
8'-3 3 ⁄ 8" (2524)
5'-11 7 ⁄ 8"
Window height shown in table
(2442)
8'-0 1 ⁄ 8"
CUSTOM SIZES AVAILABLE
(121)
Unobstructed Glass = window height – 4 3 ⁄ 4"
(13)
Minimum Rough Opening = window height + 1 ⁄ 2 "
SPECIALTY WINDOWS Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Notes on the next page also apply to this page.
Window Width Dimension 2'-0 1 ⁄ 8" (613) 2'-4 3 ⁄ 8" (721) 2'-11 15 ⁄ 16" (913) 4'-0" (1219) 4'-8 1 ⁄ 2" (1435) 4'-11 1 ⁄4" (1505) 5'-11 1 ⁄4" (1810)
Minimum Rough Opening 2'-0 5 ⁄ 8" (625) 2'-4 7 ⁄ 8" (733) 3'-0 1 ⁄ 2" (927) 4'-0 1 ⁄ 2" (1232) 4'-9" (1448) 4'-11 3 ⁄4" (1518) 5'-11 3 ⁄4" (1822)
Unobstructed Glass 19 3 ⁄ 8" (492) 23 5 ⁄ 8" (600) 31 3 ⁄ 16" (792) 43 1 ⁄4" (1099) 51 3 ⁄4" (1314) 54 1 ⁄ 2" (1384) 66 1 ⁄ 2" (1689)
CUSTOM SIZES AVAILABLE
AFFW502
AFFW503
AFFW5035
AFFW504
AFFW5045
AFFW505
AFFW5055
AFFW506
6' (1829)
AFFW6006
AFFW601
AFFW602
AFFW603
AFFW6035
AFFW604
AFFW6045
AFFW605
AFFW6055
AFFW606
AFFW608*
7'-11 5 ⁄ 8" (2429)
11'-9 1 ⁄ 2" (3594)
90 3 ⁄ 8" (2296)
136 1 ⁄4" (3461)
AFFW8006
AFFW801
AFFW12006
Arch Window Area Specifications AFFW1201
AFFW1202
AFFW803
Grille patterns shown on page 136.
4'-5 7 ⁄ 16" (1357)
Custom-size windows are available in 1 ⁄ 8" (3) increments.
4'-0 9 ⁄ 16" (1233)
AFFW802
16' (4877)
5'-0 5 ⁄ 8" (1540)
AFFW8035
5'-5 7 ⁄ 16" (1662)
AFFW804
6'-0 1 ⁄ 2" (1842)
AFFW8045
6'-5 7 ⁄ 16" (1967)
AFFW805
7'-0 1 ⁄ 2" (2146)
AFFW8055*
AFFW806*
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. *Tempered glass standard.
Arch Window Area Specifications Glass Area Sq.Ft./(m2)
Window Number
Glass Area Sq.Ft./(m2)
Window Number
AFC106
0.7
(0.07)
AFCW22
9.5
(0.88)
AFC11
1.6
(0.15)
AFCW23
13.9
(1.29)
AFC12
3.4
(0.32)
AFCW235
15.7
(1.46)
AFC13
5.1
(0.47)
AFCW24
18.3
(1.70)
AFC135
5.8
(0.54)
AFCW245
20.1
(1.87)
AFC14
6.8
(0.63)
AFCW25
22.7
(2.11)
AFC145
7.5
(0.70)
AFCW255
24.6
(2.29)
AFC15
8.5
(0.79)
AFCW26
27.2
(2.53)
AFC155
9.2
(0.86)
AFCW28
36.1
(3.35)
AFC16
10.3
(0.96)
AFFW5006
3.2
(0.30)
AFC18
13.8
(1.28)
AFFW501
5.5
(0.51)
AFCW106
1.1
(0.10)
AFFW502
10.3
(0.96)
AFCW11
2.1
(0.20)
AFFW503
14.8
(1.38)
AFCW12
4.2
(0.39)
AFFW5035
16.7
(1.55)
AFCW13
6.3
(0.59)
AFFW504
19.5
(1.81)
AFCW135
7.1
(0.66)
AFFW5045
21.4
(1.99)
AFCW14
8.4
(0.78)
AFFW505
24.1
(2.24)
AFCW145
9.2
(0.86)
AFFW5055
26.1
(2.43)
AFCW15
10.4
(0.97)
AFFW506
28.8
(2.68)
AFCW155
11.3
(1.05)
AFFW508
38.2
(3.55)
AFCW16
12.5
(1.16)
AFFW6006
4.4
(0.41)
AFCW18
16.8
(1.56)
AFFW601
7.2
(0.67)
AFCP3006
1.4
(0.13)
AFFW602
12.9
(1.20)
AFCP301
2.8
(0.26)
AFFW603
18.5
(1.72)
AFCP302
5.5
(0.51)
AFFW6035
20.8
(1.93)
AFCP303
8.2
(0.76)
AFFW604
24.2
(2.25)
AFCP3035
9.3
(0.86)
AFFW6045
26.5
(2.46)
AFCP304
10.9
(1.01)
AFFW605
29.8
(2.77)
AFCP3045
12.0
(1.12)
AFFW6055
32.1
(2.98)
AFCP305
13.6
(1.26)
AFFW606
35.5
(3.30)
AFCP3055
14.7
(1.37)
AFFW608
46.9
(4.36)
AFCP306
16.3
(1.51)
AFFW8006
7.3
(0.68)
AFCP308
21.8
(2.03)
AFFW801
11.1
(1.03)
AFC206
2.2
(0.20)
AFFW802
18.8
(1.75)
AFC21
4.1
(0.38)
AFFW803
26.4
(2.45)
AFC22
7.8
(0.73)
AFFW8035
29.5
(2.74)
AFC23
11.5
(1.07)
AFFW804
34.1
(3.17)
AFC235
13.0
(1.21)
AFFW8045
37.1
(3.45)
AFC24
15.2
(1.41)
AFFW805
41.6
(3.87)
AFC245
16.7
(1.55)
AFFW8055
44.8
(4.16)
AFC25
18.9
(1.76)
AFFW806
49.3
(4.58)
AFC255
20.4
(1.90)
AFFW12006
9.9
(0.92)
AFC26
22.6
(2.10)
AFFW1201
15.6
(1.45)
AFC28
30.2
(2.81)
AFFW1202
27.1
(2.52)
AFCW206
2.8
(0.26)
AFCW21
5.1
(0.47)
• Dimensions in parentheses are in square meters.
133
400 Series Specialty Windows
8' (2438)
3'-1 17 ⁄ 32" 2'-1 13 ⁄ 32" 1'-7 13 ⁄ 32"13 13 ⁄ 32" (493) (341) (593) (645)
11'-9" (3581)
3'-0 3 ⁄4" (933)
2'-0 5 ⁄ 8" 1'-6 5 ⁄ 8" 12 5 ⁄ 8" (473) (321) (625)
7'-11 1 ⁄ 8" (2416)
134
SE315
SP405
SP404
SP4045 SE543
SE5435
SE544
SE5445
SE545 5'-11 15 ⁄ 16" (1827)
SE581
SE582
SE585
4'-0" (1219)
3'-6 13 ⁄ 16" (1087)
SE5806
5'-0 1 ⁄ 8" (1527)
4'-6 15 ⁄ 16" (1395)
3'-10 1 ⁄4" (1175)
3'-6" (1067)
3'-0 13 ⁄ 16" (935)
3'-4 1 ⁄4" (1022)
3'-2 1 ⁄4" (972)
Additional heights
on page 136.
continued on next two pages
(914)
36"
(783)
30 13 ⁄ 16"
(870)
34 1 ⁄4"
(819)
32 1 ⁄4"
(610)
24"
(476)
18 3 ⁄4"
Table of Springline™ Window Sizes
6'-4 13 ⁄ 16" (1951)
SE542
7'-0" (2134)
SP4035 4'-10 3 ⁄ 8" (1483)
SE541
7'-4 13 ⁄ 16" (2256)
SP403 5'-10 3 ⁄ 16" (1783)
SP402
6'-3 1 ⁄ 16" (1907)
SE311
6'-10 1 ⁄4" (2089)
3'-8 1 ⁄4" (1124)
2'-0 3 ⁄4" (629)
(152)
SE5406
7'-11 7 ⁄ 8" (2435)
SE3145 4'-8 3 ⁄ 8" (1432)
2'-6 3 ⁄4" (781)
(305)
Shoulder Height 6"
SE3106
7'-3 1 ⁄ 16" (2211)
SE314 5'-8 3 ⁄ 16" (1732)
4'-0 1 ⁄ 8" (1222)
3'-6 7 ⁄ 8" (1089)
(613)
12"
4'-0" (1219) 5'-4 1 ⁄ 2" (1638) 5'-8 1 ⁄ 2" (1740) 5'-11 1 ⁄4" (1810) 6'-0" (1829)
Minimum Rough Opening 3'-2" (965) 4'-0 1 ⁄ 2" (1232) 5'-5" (1651) 5'-9" (1753) 5'-11 3 ⁄4" (1822) 6'-0 1 ⁄ 2" (1842)
Unobstructed Glass 32 3 ⁄4" (832) 43 1 ⁄4" (1099) 59 3 ⁄4" (1518) 63 3 ⁄4" (1619) 66 1 ⁄ 2" (1689) 67 1 ⁄4" (1708)
32 1 ⁄4" (819) 34 1 ⁄4" (870)
24" (610)
7'-10 1 ⁄ 8" (2391)
SE3135 6'-1 1 ⁄ 16" (1856)
SE313
6'-8 1 ⁄4" (2038)
4'-11 15 ⁄ 16" (1522)
SE312
7'-1 1 ⁄ 16" (2161)
5'-4 13 ⁄ 16" (1646)
4'-6 11 ⁄ 16" (1389)
(913)
2'-0 1 ⁄ 8"
CUSTOM SIZES AVAILABLE
3'-1 1 ⁄ 2" (953)
18 3 ⁄4" (476)
7'-8 1 ⁄ 8" (2340)
6'-0" (1829)
4'-11 9 ⁄ 16" (1513)
(1037)
2'-11 15 ⁄ 16"
Radius
6'-4 13 ⁄ 16" (1951)
5'-6 3 ⁄4" (1695)
(1219)
3'-4 13 ⁄ 16"
Window Width Dimension
6'-11 7 ⁄ 8" (2130)
5'-11 9 ⁄ 16" (1818)
(1341)
4'-0"
Chord Height
6'-6 5 ⁄ 8" (1997)
4'-4 13 ⁄ 16"
Window height shown in table
(1521)
4'-11 7 ⁄ 8"
CUSTOM SIZES AVAILABLE
(121)
Unobstructed Glass = window height – 4 3 ⁄ 4"
(13)
Minimum Rough Opening = window height + 1 ⁄ 2 "
SPECIALTY WINDOWS Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Notes on the next page also apply to this page.
36" (914) 36" (914)
ELFW6006 SE6006
ELFW601 SE601
ELFW602 SE602
SE583 SE603
SE5835 SE6035
SE584 SE604
SE5845
SE6045
SE605*
7'-11 1 ⁄ 8" (2416)
8'-0" (2438)
7'-11 5 ⁄ 8" (2429) 90 3 ⁄ 8" (2296)
8'-0 1 ⁄ 2" (2451)
Glass Area Sq.Ft./(m2)
SE3106
3.74
(0.35)
91 1 ⁄4" (2318)
SE311
5.10
(0.47)
SE312
7.86
(0.73)
SE313
10.54
(0.98)
SE3135
11.65
(1.08)
SE314
13.28
(1.23)
SE3145
14.38
(1.34)
SE315
15.98
(1.49)
SE3155
17.10
(1.59)
SE316
18.71
(1.74)
SE5406
11.22
(1.04)
SE541
13.71
(1.27)
SE542
18.74
(1.74)
SE543
23.64
(2.20)
SE5435
25.66
(2.38)
SE544
28.64
(2.66)
SE5445
30.64
(2.85)
SE545
33.57
(3.12)
SE5455
35.61
(3.31)
SE546
38.54
(3.58)
SE5806
12.67
(1.18)
SE581
15.33
(1.42)
SE582
20.69
(1.92)
SE583
25.92
(2.41)
SE5835
28.08
(2.61)
SP802
SE584
31.26
(2.90)
continued on next page
SE5845
33.39
(3.10)
SE585
36.51
(3.39)
SE5855
38.70
(3.60)
SE586
41.82
(3.89)
SE6006
14.01
(1.30)
SE601
16.81
(1.56)
SE602
22.47
(2.09)
SE603
27.98
(2.60)
SE6035
30.26
(2.81)
SE604
33.61
(3.12)
SE6045
35.86
(3.33)
SE605
39.16
(3.64)
SE6055
41.46
(3.85)
SE606
44.76
(4.16)
SP402
11.62
(1.08)
SP403
15.16
(1.41)
SP4035
16.63
(1.55)
SP404
18.78
(1.75)
SP4045
20.23
(1.88)
SP405
22.35
(2.08)
SP4055
23.83
(2.21)
SP406
25.95
(2.41)
SP8006
24.98
(2.32)
SP801
24.98
(2.32)
SP802
36.46
(3.39)
ELFW6006
11.58
(1.08)
ELFW601
14.35
(1.33)
ELFW602
19.95
(1.85)
ELFW8006
20.88
(1.94)
ELFW801
24.64
(2.29)
ELFW802
32.25
(3.00)
48"
48" (1219)
Custom-size windows are available in 1 ⁄ 8"
(1219)
(1056)
41 9 ⁄ 16"
48" (1219)
Window Number
(3) increments.
applied when ordered at the same time
4'-6" (1372)
3'-11 9 ⁄ 16" (1208)
Extension jambs are available factory
SP8006
ELFW8006 5'-0" (1524)
4'-5 9 ⁄ 16" (1360)
as Springline™ windows.
SP801
5'-5 11 ⁄ 16" (1668)
6'-0 1 ⁄ 8" (1832)
ELFW801
ELFW802
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. *Tempered glass standard.
Grille patterns shown on page 136.
• Dimensions in parentheses are in square meters.
135
400 Series Specialty Windows
Springline™ Window Area Specifications
SPECIALTY WINDOWS Table of Springline™ Window Sizes
(continued)
Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96
3'-1 1 ⁄ 2" (953)
4'-0" (1219)
5'-4 1 ⁄ 2" (1638)
5'-8 1 ⁄ 2" (1740)
6'-0" (1829)
Minimum Rough Opening
3'-2" (965)
4'-0 1 ⁄ 2" (1232)
5'-5" (1651)
5'-9" (1753)
6'-0 1 ⁄ 2" (1842)
Unobstructed Glass
32 3 ⁄4" (832)
43 1 ⁄4" (1099)
59 3 ⁄4" (1518)
63 3 ⁄4" (1619)
67 1 ⁄4" (1708)
32 1 ⁄4" (819)
34 1 ⁄4" (870)
Window Width Dimension
36"
8'-4 13 ⁄ 16" (2561)
(914)
(870)
from page 134.
SE6055*
Custom-size windows are
8'-11 7 ⁄ 8" (2740)
SE5855*
8'-10 5 ⁄ 8" (2708)
SE5455
8'-8 1 ⁄ 8" (2645)
36" (914)
Table is continued
8'-3 1 ⁄ 16" (2515)
(819)
8'-1 1 ⁄ 16" (2465)
7'-4 13 ⁄ 16" (2256) SP4055
7'-11 7 ⁄ 8" (2435)
7'-6 5 ⁄ 8" (2302)
(1826)
SE3155
5'-11 7 ⁄ 8"
32 1 ⁄4"
24" (610)
(610)
(476)
18 3 ⁄4"
6'-11 9 ⁄ 16" (2122)
(1646)
Shoulder Height 5'-4 13 ⁄ 16"
Chord Height CUSTOM SIZES AVAILABLE
(121)
Unobstructed Glass = window height – 4 3 ⁄ 4"
(13)
Minimum Rough Opening = window height + 1 ⁄ 2 "
Window height shown in table
24"
18 3 ⁄4" (476)
34 1 ⁄4"
CUSTOM SIZES AVAILABLE Radius
available in SE316
SP406
SE546*
SE586*
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. *Tempered glass standard.
1 ⁄ 8"
(3) increments.
SE606*
Extension jambs are available factory applied when ordered at the same time as Springline™ windows. Grille patterns shown below.
Grille Patterns Colonial
Renaissance
Sunburst
Number of lights and overall pattern varies with window size. Patterns are not available in all configurations.
Arch
Specified equal light and custom patterns are also available. For more information on divided light see page 11 or visit andersenwindows.com/grilles.
Springline™
Springline™ Flanker Custom Pattern Examples
136
Table of Springline™ Flanker Window Sizes Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96
1'-9" (533)
Unobstructed Glass
12 3 ⁄4" 12 3 ⁄4" (324) (324) CR
15 3 ⁄4" 15 3 ⁄4" (400) (400) CN
18 3 ⁄4" (476)
2'-4 7 ⁄ 8" 2'-4 7 ⁄ 8" (733) (733)
3'-0 1 ⁄ 2" (927)
19 3 ⁄ 8" (492)
19 3 ⁄ 8" (492)
23 5 ⁄ 8" 23 5 ⁄ 8" (600) (600) CW
31 3 ⁄ 16" 31 3 ⁄ 16" (792) (792) CXW
32 1 ⁄4" (819)
32 1 ⁄4" (819)
C
32"
31 3 ⁄ 16"
(584)
23 11 ⁄ 16"
24" (610)
(311)
12 1 ⁄4"
(440)
400 Series Specialty Windows
(C3, C35, C4, C5, C6). Grille (234)
8 13 ⁄ 16"
9 5 ⁄ 8"
(244)
(435)
17 1 ⁄ 8"
(564)
patterns shown on page 136.
Jamb Unit Dimension Width 1 ⁄ 4" (6) Minimum Rough Opening Width Minimum Rough Opening Width
1 ⁄ 4"
16"
(406)
12"
(305)
23 7 ⁄ 8"
(606)
35 7 ⁄ 8"
(911)
Unit Dimension Height
Unit Dimension Height
Jamb
(6) 1 ⁄ 4" (6) Sill
Horizontal Section
Min. Rough Opening Height
CTC2 P4040 SFR A41Head C6
SFL C6
SFL CR6 CR12
CTC2 P4040 A41
SP406 A41
SFL CR6 CR12
SFR C6
SFR CR6 CR12
CR13 CR13
SP406 A41
SFR CR6 CR12
CR13 CR13
SFL SFR CXW6 CXW6 CR13 AXW31 AXW31 CR13
Vertical Section
Flexible Sill Drip Cap by Others
Jamb Unit Dimension1Width ⁄ 4" (6) Min. Rough Opening Width
Jamb Unit Dimension Width (6) Min. Rough Opening Width 1 ⁄ 4"
Head
Head
Jamb 1 ⁄ 4"
(6) Sill
Sill
Unit Dimension Height
Andersen® Arch Casing and Extension Jambs
Min. Rough Opening Height
Andersen® Arch Casing Head and Extension Jambs
Flexible Drip Cap by Others
Unit Dimension Height
Sill
Horizontal Section
SFL SFR CXW6 CXW AXW31 AXW
SFL CR4 CR15
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Min. Rough Opening Height
Min. Rough Opening Height
Jamb
Unit Dimension Height
Head
Head
SFL C6
Springline™ Window Details
Flexible Drip Cap by Others Minimum Rough Opening Height
Unit Dimension Height
Sill Minimum Rough Opening Height
Jamb Unit Dimension 1 ⁄ 4"Width (6)
Flexible Drip Cap by Others
(708)
(427) (729)
and Extension Jambs
27 7 ⁄ 8"
16 13 ⁄ 16" 28 11 ⁄ 16"
Head
Flexible Drip Cap by Others
(1013)
(618) (919)
and Extension Jambs
39 7 ⁄ 8"
Flexible Drip Cap by Others
(1033)
24 5 ⁄ 16" 36 3 ⁄ 16"
(1353)
40 11 ⁄ 16"
(721) (1048)
48 3 ⁄ 16"
29 3 ⁄ 8" 41 1 ⁄4"
(1353)
Unit Dimension Height
Unit Dimension Height
Sill
(6)
contact your Andersen supplier.
(CR, CN, C, CW, CXW) and heights
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Jamb
To order Springline™ flanker windows
standard casement window widths
Arch Window Details
1 ⁄ 4"
36" (914)
Custom window dimensions shown
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allowAndersen® for use of building wraps, Andersen® Arch flashing, sill panning, brackets, fasteners orArch other items. See pages 288-289 for more details. Casing Casing • Dimensions in parentheses are in millimeters.
Head
3'-0 1 ⁄ 2" (927)
in table are compatible with
Flexible Drip Cap by Others
53 1 ⁄4"
6'-0 3 ⁄ 8" (1838)
2'-0 5 ⁄ 8" 2'-0 5 ⁄ 8" (625) (625)
Examples:
Minimum Rough Opening Height
43 1 ⁄4" (1099) C4
Minimum Rough Opening Height
Flexible Drip Cap by Others
67 1 ⁄4" (1708) C6
55 1 ⁄ 8" (1400) C5
38 13 ⁄ 16" 31 3 ⁄ 16" (986) (792) C35 C3 Shoulder Height 17 5 ⁄ 16" 22 3 ⁄ 16"
3'-0 1 ⁄ 2" (927) 4'-0 1 ⁄ 2" (1232) 5'-0 3 ⁄ 8" (1534)
3'-5 3 ⁄ 8" (1051)
4'-0" (1219) 5'-11 7 ⁄ 8" (1826)
4'-11 7 ⁄ 8" (1521)
3'-4 13 ⁄ 16" (1037)
2'-11 15 ⁄ 16" (913)
Chord Height
(473)
18 5 ⁄ 8"
Radius
1'-9" (533)
36"
1'-5 1 ⁄ 2" 1'-5 1 ⁄ 2" (445) (445)
2'-4 3 ⁄ 8" 2'-4 3 ⁄ 8" (721) (721)
(813)
Minimum Rough Opening
2'-11 15 ⁄ 16" 2'-11 15 ⁄ 16" (913) (913)
2'-0 1 ⁄ 8" 2'-0 1 ⁄ 8" (613) (613)
(914)
1'-8 1 ⁄ 2" 1'-8 1 ⁄ 2" (521) (521)
1'-5" (432)
(792)
1'-5" (432)
Window Dimension
Sill Vertical Section
• Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
137
SE60 P605
Height
Min. Height
SPECIALTY WINDOWS Width
Sill Width Width
Width almost any shape or size
with these limitations:Sill Width Height
Vertical Leg
Width
Min. Width
Min. Width
Max. Height
Equal Leg
Side Height Min. Width Height Sill to Vertical Peak Leg Height
Max. Sill Width Vertical Leg
Width
Width
Sill to Peak Height
Vertical Leg
Sill Width Height Equal itch Sill Width Leg PHeight
Height Height
Height
Octagon
Max. Hexagon Height Height
Width
Width Max. Equal Height Leg
Height Min. HeightHeight
Min. Height Equal Leg Vertical Leg Width Sill Width
Width
Vertical Leg
Equilateral Hexagons contain six equal angles and sides. Specify length of one leg.
Height
Sill Max.to Vertical Peak Height Leg Side Height Height Min. Height Width
h
Width
Equal HeightSill to Max. Leg Height PeakHeight Height Min. Max. Height Height
Unequal Hexagons Sill Widthcontain Widththree pairs of Width Sill Width angles andSilltwo sets of equal length legs. Unequal leg at head of unit is parallel to and is centered over unequal leg at sill. Specify length of leg at sill and head, one vertical leg and window height. Height Min. Width
• Dimensions in parentheses are in millimeters.
Width Height Height 138 Max. Height
Width
Height Min.
Side Height
Min. Width
Width
Max. Sill Width
Vertical Leg Sill to Width Peak Height
Width
h Pitc
Width
Width
Side Width Height Vertical Leg Sill Width h Pitc Sill Width
Sill to Peak Min. Height Height Height
Peaked Pentagon contain sides of equal length, extending at right angles from the sill, and two angled sides, of equal length, Trapezoid Min. Min. Height Height that peak above center of sill. Specify Height Min. Width Height window width at sill, height of one vertical Sill Width leg, andWidth window height from sillSill to to peak. Width Width Min. Vertical Height LegMax. Sill Width h Sill Width Pitc
Min. Max. Height Height
Peak Height
Side Height Min. Width Height Height Sill Width
Sill to Peak Height Max. Height
Side Height Width Min. Sill Width Height
Width
Sill to Peak Height Side Sloped Vertical to Left or Sloped to Height Right Height Leg face cut to left or right. contain angle h Specify window width Patitcsill, window Sill Width
Min. Height
Sill Width Width
Sill Width
Max. Height
Max. Sill Width Min. Height
Equal Leg Side Height Min. Min.Height Height
Max. Sill Width Sill Width
Max. Height
Min. Height Min. angles and either two or four equalHeight Sill Width sides. Include both squares and
Min. Height
Sill Widthcontain Equilateral Octagons Width eight equal angles and sides. Specify length of one leg. StandardMax. size octagons are available in Height 2' (610), 2'-4" (711) and 3' (914) dimensions. See page 127.
Width
Height
Min. Width
Max. Rectangles contain four equal Sill Width Height
Min. Width
Width
Height
Angled Pentagon contain an angle cut, or a "cut-off corner" sloping to left or right. Specify width at head, width at sill, height on short side and height on long side.
Height
Max. Max. Height Height
Equal Leg
Width
Width
Width
Sill Width
Height
Max. Max. Height Height VerticalHeight Leg Min. Height Width
rectangles. Specify window Max. Sill Width width and height.
Width
Width two pairs of Diamonds contain parallel and equal length sides. Specify by window Max. width and Height window height.
Isosceles Triangles contain two sides of equal length and equal angle. Specify length of leg at sill and window height (sill to peak).
Width
Sill Width
Sill to Peak Height Max. Height
h
Sill Width
Min. Width Width
Width
Pitc
Width
Width
Pentagon
Sill to Peak Height Height Equal Max.Leg Height Height
Width
Height
Sill Width
Sill Width Width
Width
Width Height
Min. Height
Height Rectangle
Horizontal/Pitched Width Parallelograms Sillcontain Width two pairs of parallel sides. Specify length of Height vertical leg, window width and pitch.
Right Triangles contain one 90° corner. Specify length of both legs extending from the 90° corner.
Max. Height
Max. Height
Width
Sill to
Peak Parallelogram Height Width
Height
Equal Leg
Vertical Leg
Width
Triangle
Width Width Width
Equal
may beHeight assembled in
Equal Leg
Height
Width
Sill Width
Sill to Height Max. glassLeg • Maximum standard area of 60 sq.ft. or 5.57 m2 Peak Vertical Height Max. Height Leg • Square footage is based on a square or Side rectangularSillshape to Height Height Min.may be less than 14° Min. Min. Peak Height Width • No angle Height Height Height Height Height • No leg may be less than 6" (152) or greater than 144" (3658) Width Sill Width Equal Sill Width • Leg No short leg Max. may Sill be Width greater than 84" (2134) Equal • See product Equal information below for additional limitations basedWidth onWidth specific shapes Sill Height Leg Leg
® windows Flexiframe Max.
Height
Width
Height Vertical Leg
Flexiframe® Window Shapes and Design Criteria Minimum and Maximum Limits
Height
Min. Height
Sill to Peak Height SillEqual Width Leg
Min. Height Sill Width
height, and Sill length of short side. Width Width Slope is often designed to match Min. Width a roof's slope. Height Max. Height
Min. Height
Width Max. Sill Width
Sill to Peak Height
Side Height
Sill Width
Flexiframe® Window Detail
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Glazing Sealant Glass Stop 1 3 ⁄ 8" (35) Trim Stop (included in factory set up) 2" (51) Trim Stop also available
1 3 ⁄ 8" (35)
in. ight
Andersen® Extension Jamb Flange 1 5 ⁄ 16" (33)
2 7 ⁄ 8" (73) Sill Vertical Section
Combination Examples 400 Series Specialty Windows
Sill to Peak Height
Wood Casing by Others 3 ⁄ 16"
For these joined 400 Series window combinations only: l
3 ⁄ 16"
(5)
Andersen Trim Strip Set in Continuous Bead of Sealant Vertical (ribbon) Joining Detail Each Side Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Extension Jamb Alignment l
Andersen® Wood Joining Strip
(5)
Overall Window Dimension Width
Arch, Springline™ or Flexiframe® over Casement Arch, Springline™ or Flexiframe® alongside Awning
Sum of individual window widths plus 3 ⁄ 16" (5) for each join. Overall Rough Opening Width Overall window dimension width plus 1 ⁄ 2" (13).
Casement Casement Jamb Jamb
Casement Casement Jamb Jamb
Andersen Auxiliary Andersen Auxiliary Extension Extension Jamb Jamb
1 ⁄ 4"1 ⁄(6) 4" (6) Filler Filler
Flexiframe Flexiframe Jamb Jamb ®
Method Method AA
Andersen Wood Casing
Modified Andersen Modified Andersen Extension Jamb Extension Jamb (tongue removed) (tongue removed)
Flexiframe Flexiframe Jamb Jamb
®
®
®
Andersen Wood Joining Strip Andersen Trim Strip Set in Continuous Bead of Sealant Each Side
3 ⁄ 16" (5) Horizontal Section Flexiframe® to Flexiframe
Method Method BB
Method A: Individually Framed Use optional Andersen auxiliary extension jambs for individual picture frame trimming.
Horizontal joining on next page.
Method B: Perimeter Framed For continuous perimeter trimming,
For more joining information see the combination
remove tongue and use 1 ⁄ 4" (6) thick filler between Arch, Springline™
designs section starting on page 255.
or Flexiframe® trim stop and extension jamb. Casement Jamb
Casement Jamb
• Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
Auxiliary Extension Jamb Available in 4' (1219) and 6' (1829) Lengths,
1 ⁄ 4"
(6) Filler Strip
Modified 139 Andersen Extension Jamb Aligned Without
SPECIALTY WINDOWS Horizontal (stack) Joining Details Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Flexiframe® over Flexiframe Window
Flexiframe® over Casement Window
Flexiframe® over Tilt-Wash Double-Hung Window
Overall Window Dimension Height
Overall Window Dimension Height
Overall Window Dimension Height
Sum of individual window heights plus
3 ⁄ 16 "
(5)
Sum of individual window heights plus
3 ⁄ 16 "
(5)
Sum of individual window heights plus 1 ⁄ 8" (3)
for each join.
for each join.
for each join.
Overall Rough Opening Height
Overall Rough Opening Height
Overall Rough Opening Height
Overall window dimension height plus 1 ⁄ 2" (13).
Overall window dimension height plus 1 ⁄ 2" (13).
Overall window dimension height plus 1 ⁄ 2" (13).
Vertical Section
Andersen Trim Strip Set in Continuous Bead of Sealant Each Side
3 ⁄ 16" (5) 1⁄ 2"
Unit Dim.
Andersen® Wood Joining Strip
(13)
Andersen Trim Strip Set in Continuous Bead of Sealant Each Side
Andersen Aluminum Trim Piece
Andersen Extension Jamb 0"
1⁄ 8"
(3)
3 ⁄ 16"
Andersen Trim Strip Set in Continuous Bead of Sealant Each Side
Vertical Section
Andersen Wood Casi
Unit Dim.
Andersen Wood Joining Strip
(5)
Wood Casing by Others
Andersen Extension Jamb
Andersen 2 3⁄ 8" (60) Wood Casing
(5)
0" Unit Dim.
3 ⁄ 16"
(60)
Unit Dim.
Andersen Wood Casing
3⁄ 8"
Andersen 2 Wood Casing ®
Andersen W Joining Stri
Andersen T Strip Set in Continuous of Sealant Each Side
Vertical Section
Vertical joining on previous page.
Andersen Extension Jamb Wood Casing 1⁄ 2" (13) by Others
Andersen® Extension Jambs
Structure and Anchorage by Others 0" Unit Dim.
Separate Rough Openings Detail
Andersen Andersen 2 3⁄ 8" (60) Wood Casing Nailing Flange Wood Casing Andersen Extension Jamb Andersen Wood Joining 1⁄ 8" (3)Strip
Andersen ® 1 Andersen Andersen Trim Andersen Andersen ⁄ 2" (38) = 1'-0" (305) Scale 1Wood 1:8 Trim Set Wood—Filler Strip Joining Strip 3 ⁄ 16Strip Aluminum " (5) Set in in Continuous Continuous Bead Trim Piece Andersen Trim a wider joined To meet structural requirements or to achieve BeadofofSealant Sealant Andersen Trim Strip Set in Each Each Side Side Strip Set in Continuousinto Bead appearance, windows may be installed separate rough 2" Continuous Bead of Sealant (51) of Sealant each Side openings Each Side having vertical support (by others) in combination
with Andersen® exterior filler and exterior vinyl trim.
Structure and Ancho by Others
Andersen Adequate Headers Wood Casing 0"
Andersen Wood Fille
Andersen Wood Joining Strip 3 ⁄ 16" (5) Andersen Trim Strip Set in Continuous Bead of Sealant Each Side
2" (51)
Wood Casing by Others
Nailing Flange
Andersen® Extension Jambs Casement Jamb Structure and Anchorage by Others
Adequate Headers
nt Jamb
Andersen® Extension Jambs
Unit Dim.
(60)
Wood Casi by Others
Unit Dim.
3⁄ 8"
Andersen 2 Wood Casing ®
Unit Dim.
For more joining information see the combination Wood255. Casing designs section starting on page by Others
Casement Jamb
Andersen Wood Filler 3 ⁄ 16" (5) Modified Andersen Extension Jamb Aligned Without Tongue for Vertical Section Jamb Groove Flexiframe® and Perma-Shield® Gliding Patio Door
me® Jamb
hod B
Auxiliary Andersen Trim Extension Jamb Strip Set in Available in Continuous Bead 2" of Sealant (51) 4' (1219) and 6' (1829) Lengths, each Side Horizontal Section 4 9 ⁄ 16" (116), ⁄ 4" (133) 5 1Awning Flexiframe® and 6 9 ⁄ 16" (167) or 7 1 ⁄ 8" (181) Widths
1 ⁄ 4"
(6) Filler Strip (by others)
Modified Andersen Extension Jamb Aligned Without Tongue for Jamb Groove
• Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. Jambopenings. Flexiframe Flexiframe® Jamb • Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent ®rough • Dimensions in parentheses are in millimeters.
Method A
Casement Jamb 140
Casement Jamb
Method B
Andersen T Strip Set in Continuous of Sealant each Side
COMPLEMENTARY SPECIALTY WINDOWS CUSTOM SIZING
400 Series Complementary Specialty Windows
in 1â &#x201E;8" (3) increments
SECTION REFERENCE Window Details .......................... 144 Joining Details............................ 144 Combination Designs ................. 255 Performance Data ...................... 269 Warranty .............................290-291 Dimensions in parentheses are in millimeters.
COMPLEMENTARY SPECIALTY WINDOWS FEATURES
B
B
A
E
E
ACCESSORIES Sold Separately
A
D
C
Frame A Heavy-duty aluminum cladding
Glass
protects the frame exterior, providing lowmaintenance durability. Standard cladding finish meets AAMA 2604. An optional finish that meets the AAMA 2605 standard is also available.
options include:
B A vinyl installation flange extends 1 1/2" (38) around the perimeter of the unit to help properly position the unit in the opening. Installation clips are standard for increased structural anchoring to building members. Mounted around the frame perimeter, the clips rotate into position and can be bent into place against the framing members to suit all jamb conditions.
C Wood members are treated with a water-repellent wood preservative for long-lasting* protection and performance. Radii are made of laminated pine veneers. Lineal components are solid or engineered wood with a pine core.
D Silicone glazing bead combined with two-sided silicone tape provides superior weathertightness. Jambs A variety of basic unit jamb designs and depths are available to match 400 Series units. Specify desired jamb depth when ordering.
Interior Arch Casing
Extension Jambs
Available in Colonial or Ranch styles. Additional profiles are also available. For easy integration and consistency, casing dimensions are consistent with Wood Moulding and Millwork Producers Association specifications. Available in pine, oak and maple.
Standard jamb depths are 4 9/16" (116) or 2 7/8" (73). Extension jambs are available in 1⁄16" (1.5) increments between 4 9⁄16" (116) and 7 1⁄8" (181). Additional dimensions are available. Contact your Andersen supplier for more information. Extension jambs are available in unfinished pine or prefinished White. Available for jobsite application or can be factory-applied. Plinth Blocks
D
C
Frame
For enhancing casing transitions. Decorated with a radial sunburst, or use the reverse side flush face.
2 1⁄4" (57) Colonial style. WM366
E High-performance glass • Low-E4® glass® • Low-E4® HeatLock™ glass • Low-E4® Sun glass • Low-E4® SmartSun™ glass • Low-E4® SmartSun™ HeatLock™ glass Tempered glass and other glass options are available. Contact your Andersen supplier.
For arch windows, use 2 7⁄8" (73) x 4" (102) size plinth block with 2 1⁄4" (57) and 2 1⁄2" (64) casing. Use 3 7⁄8" (98) x 5 1⁄4" (133) size with 3 1⁄2" (89) casing.
A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite.
2 1⁄2" (64) Colonial style. WM351
3 1⁄2" (89) Colonial style. WM444
Patterned Glass Patterned glass options are available. See page 10 for more details.
Complementary specialty windows are available with Stormwatch® protection. For a copy of the Andersen® Coastal Product Guide go to andersenwindows.com/coastal or contact your Andersen supplier. CAUTION: • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products.
For half circle, circle, elliptical and oval windows, use 2 7⁄8" (73) size pinth block with 2 1⁄4" (57) and 2 1⁄2" (64) casing. Use 3 7⁄8" (98) size with 3 1⁄2" (89) casing. 2 1/4" (57) Ranch style. WM324 2 1/2" (64) Ranch style. WM315
EXTERIOR
White
Canvas
Sandtone
Terratone
Forest Green
Dove Gray
Prairie Grass
Red Rock
Cocoa Bean
Black
Dark Bronze
INTERIOR
* Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 400 Series Limited Warranty. Dimensions in parentheses are in millimeters. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
142
Pine
Maple
Oak
White
Naturally occurring variations in grain, color and texture of wood make each window one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
Shapes Andersen® complementary specialty windows are available in a variety of sizes. Fixed unit profiles may vary dependent upon shape. Contact your Andersen supplier for specific sizes, details and joining information.
Right Triangle
Isosceles Triangle
Trapezoid
Angled Pentagon
Peak Pentagon
Pitched Parallelogram
Equilateral Hexagon
Diamond
Octagon
Unequal Hexagon
Gothic
Half Circle
Quarter Circle
Eyebrow
Partial Eyebrow
Elliptical
Extended Gothic
Springline™
Springline™ Flanker
Arch
Unequal Leg Arch
Circle
Oval
Extended Reverse Partial Eyebrow
Extended Reverse Eyebrow
Quatrefoil
400 Series Complementary Specialty Windows
Rectangle
The Andersen complementary specialty window shapes below are also available by special order.
Partial Arch
Partial Elliptical
Quarter Arch
Partial Extended Arch
Reverse Partial Eyebrow
Raised Eyebrow
Extended Raised Eyebrow
Extended Elliptical
143
COMPLEMENTARY SPECIALTY WINDOWS Complementary Specialty Window Details Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Complements Casement, Awning and Picture Windows
Complements Double-Hung Windows and Patio Doors
55757⁄ 8⁄ 8"7"⁄(149) 8(149) " (149) (116) 44949⁄ 16⁄ 16 (116) 9"⁄ "16 " (116)
(33)(33) (33)
Jamb Depth Jamb Depth Jamb Depth
11111⁄ 8⁄ 8"1"⁄(29) 8(29) " (29) 77 ⁄ 8⁄ 8"7"⁄(23) 8(23) " (23)
⁄ 16"⁄ "16" 1113113⁄ 16 13 (46) (46) (46)
1 1 ⁄ 211"11⁄ ⁄22"" (38)(38) (38)
(38)
Curved Head Curved Head Curved Head
1111⁄ 16 ⁄ 16"⁄ "16(23) (23) 11 " (23) 77 ⁄ 8⁄ 8"7"⁄(29) 8(29) " (29)
77
Horizontal (stack) Joining Detail
(18)
Sill
13 ⁄ 16"
Mullion Mullion (21) Mullion Mullion
4 9 ⁄ 16" (116) Jamb Depth
4 9 ⁄ 16" (116) 499⁄ 16⁄ 16" "Depth (116) 4Jamb (116) JambDepth Depth Jamb
4 99 ⁄⁄ 16 16" (116) 4 " (116) 9 ⁄ 16" (116) 4Jamb Depth Jamb Depth Jamb Depth
Horizontal Section
13 ⁄ 1613 " ⁄ 16 13 ⁄ 16"" 11 (21) ⁄ 16" (21) (21)
11"55⁄ 16 1 5 ⁄ 16 Dimension Width Dimension Width ⁄ 16""Jamb Jamb Jamb Dimension Width Dimension Width Unit Dimension Width UnitUnit Unit Dimension Width Jamb Jamb UnitUnit Jamb (33)(33) 1 5 ⁄ 16" Jamb (33) Unit Dimension Width Unit Dimension Width (33) Minimum Rough Opening Width Minimum Rough Opening Width Minimum Rough Opening Width Minimum Rough Opening Width Horizontal Section
Horizontal (stack) Joining Detail – LVL
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Vertical Section 400 Series Complementary Specialty over 400 Series Woodwright® Double-Hung Window
For more joining information see the combination designs section starting on page 255.
Vertical Section 400 Series Complementary Specialty over 400 Series Frenchwood® Hinged Inswing Patio Door
• 4 9/16" (116) jamb depth measurement is from backside of installation flange. • Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
144
(21) (18)
Curved Head Curved Head Curved Head Interior Curved Interior Head Interior TrimTrim StopStop Trim Stop Interior Trim Stop 11 ⁄ 1611 16 " ⁄(18) 11 ⁄ 16"" (18) (18) 13 ⁄ 1613 ⁄ (21) 16 " " (21) 13 ⁄ 16" (21)11 ⁄ 16" (18) 13 ⁄ 16" (21) Sill Sill Sill
(18)(18) (18)
Unit Dimension Width Dimension Width Unit Dimension Width Unit Dimension Width Unit Dimension Width Unit Unit Dimension Width 11⁄ 8⁄ 8 "1"⁄(3) 8(3) " (3) Minimum Rough Opening Width Minimum Rough Opening Width Minimum Rough Opening Width
13 ⁄ 1613 16 " ⁄(21) 13 ⁄ 16"" (21) (21) 11 ⁄ 1611 16 " ⁄(18) 11 ⁄ 16"" (18) (18)13 ⁄ 16" 11 ⁄ 16"
Vertical Section 11 ⁄ 1611 " ⁄ 16 11 ⁄ 16""
⁄ 8⁄ 8"7"⁄ 8" (23) (23) (23)
Minimum Rough Opening Height
Minimum Rough Opening Height MinimumRough RoughOpening OpeningHeight Height Minimum Unit Dimension Height UnitDimension DimensionHeight Height Unit
Minimum Rough Rough Opening Opening Height Height Minimum Minimum Rough Opening Height Unit Dimension Dimension Height Height Unit Unit Dimension Height
11111⁄ 8⁄ 8"1"⁄(29) 8(29) " (29) 77 ⁄ 8⁄ 8"7"⁄(23) 8(23) " (23)
Vertical Section 400 Series Complementary Specialty over 400 Series Casement Window
(21) (18)
Lineal Head Lineal Head Lineal Head Lineal Head
Sill Sill Sill Vertical Section
11515⁄ 16⁄ 16 5"⁄ "16" Jamb Jamb Jamb (33) (33) (33)
13 ⁄ 1613 16 " ⁄(21) 13 ⁄ 16"" (21) (21) 11 ⁄ 1611 16 " ⁄(18) 11 ⁄ 16"" (18) (18)13 ⁄ 16" 11 ⁄ 16"
1 1 ⁄ 2"
Lineal Head Lineal Head Lineal Head
11111⁄ 8⁄ 8"1"⁄ 8" (29) (29) (29)
5 7 ⁄ 855" 7(149) 7⁄ 8⁄ 8"" (149) (149) 5 7 ⁄ 8" (149) ⁄ 16 44"99(116) 4 9 ⁄ 16 ⁄ 16"" (116) (116) Jamb Depth 5 ⁄ 16 4 9 ⁄ 16" (116) "Depth 1Jamb Jamb Depth (33) Jamb Depth
Unit Dimension Height
11515⁄ 16⁄ 16 5"⁄ "16" (33) (33) (33)
11"55⁄ 16 1 5 ⁄ 16 ⁄ 16""
Jamb
FRENCHWOOD GLIDING PATIO DOORS
®
CUSTOM SIZING
400 Series ® Frenchwood Gliding Patio Doors
in 1⁄8" (3) increments
SECTION REFERENCE Table of Sizes ............................. 148 Specifications ............................ 150 Custom Sized Doors ................... 149 Grille Patterns ............................ 149 Door Details ........................ 150-152 Joining Details............................ 152 Door Sidelights & Transoms ....... 171 Combination Designs ................. 255 Performance Data ...................... 269 Warranty .............................290-291 Dimensions in parentheses are in millimeters.
FRENCHWOOD GLIDING PATIO DOORS ®
C
FEATURES I
Frame A The sill has an extruded aluminum track, with a stainless steel cap that resists stain, rust and denting*. A thermal barrier reduces conductive heat loss and limits condensation on the inside. The sill has an attractive wear-resistant, heat-baked finish in a neutral gray color.
Glass H Panels are silicone bed glazed
H
and finished with an interior wood stop.
B
I High-performance glass options include:
D
• Low-E4® tempered glass® • Low-E4® HeatLock™ tempered glass • Low-E4® Sun tempered glass • Low-E4® SmartSun™ tempered glass • Low-E4® SmartSun™ HeatLock™ tempered glass
E F
B All basic exterior frame members are covered with a rigid vinyl sheath that maintains an attractive appearance while minimizing maintenance.
G
C Wood frame members are treated with a water-repellent preservative for long-lasting* protection and performance. Interior frame trim pieces are unfinished pine. Oak and maple veneer and prefinished White interior options are available.
A
EXTERIOR
Additional glass options are available. Contact your Andersen supplier. A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite. Patterned Glass Patterned glass options are available. See page 10 for more details.
INTERIOR Prefinished White interiors are only available on units with White exteriors.
Mortise-and-Tenon Joints
Factory-assembled doors are available (two-panel doors) and arrive at the jobsite ready to install. Unassembled doors are also available and require jobsite assembly.
White
Sandtone
Pine
White
D A flexible vinyl weatherstrip at the head
Terratone
Forest Green
Maple
Oak
and side jambs provides a positive seal between the frame and panels.
Panel E The exterior of the wood door panel is protected with a low-maintenance urethane base finish in White, Sandtone, Terratone or Forest Green color.
Naturally occurring variations in grain, color and texture of wood make each door one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
Panel joints are mortise-and-tenon with patented dowel construction for maximum strength.
HARDWARE FINISHES
Flexible Seal
F Panel interior surfaces are unfinished pine veneer. Unfinished oak and maple veneers are available as options. Lowmaintenance prefinished White interiors are also available on units with White exteriors.
G Dual ball-bearing rollers on door panels provide smooth gliding operation with self-contained leveling adjusters.
A full-length combination weatherstrip/ interlock system provides a flexible seal at the meeting stile.
GLIDING PATIO DOOR HARDWARE OPTIONS
Antique Brass
Black
Bright Brass
Gold Dust
Oil Rubbed Polished Bronze Chrome
Brushed Chrome
Distressed Distressed Bronze Nickel
Satin Nickel
Stone
White
Distressed bronze and oil rubbed bronze are "living" finishes that will change with time and use.
**
Bold name denotes finish shown.
YUMA®
ENCINO®
ANVERS ®
NEWBURY ®
COVINGTON ™
WHITMORE ®
ALBANY
TRIBECA®
Distressed Bronze Distressed Nickel
Distressed Bronze Distressed Nickel
Bright Brass Oil Rubbed Bronze Satin Nickel
Antique Brass Bright Brass Brushed Chrome Oil Rubbed Bronze Polished Chrome Satin Nickel
Antique Brass Bright Brass Oil Rubbed Bronze
Antique Brass Bright Brass Oil Rubbed Bronze Satin Nickel
Black Gold Dust Stone White
Stone White
* Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 400 Series Limited Warranty. ** Hardware sold separately. Dimensions in parentheses are in millimeters.
Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
146
Tribeca and Albany hardware are zinc diecast with powder-coated durable finish. Other hardware is solid forged brass. Mix-and-match interior and exterior style and finish options are available. Bright brass and satin nickel finishes feature a 10-year limited warranty.
ACCESSORIES Sold Separately Locking System
Frame
Reachout Locking Hardware
Extension Jambs
Andersen ® Art Glass
Standard jamb depth is 4 9/16" (116). Pine, oak or maple veneer or prefinished White interior extension jambs are available in 1⁄16" (1.5) increments between 5 1⁄16" (129) and 7 1⁄8" (181).
Andersen art glass panels come in a variety of original patterns, including four Frank Lloyd Wright ® Series designs. Available for stationary panels, sidelights and transoms. See pages 213-214 for details on Andersen art glass. Visit andersenwindows.com/artglass for details and pattern information.
Auxiliary Foot Lock
Threshold Provides an extra measure of security when the door is in a locked position. Lock can be set so the door is fully closed or partially open to provide a secure venting position. Available in all hardware finishes. An oak or maple threshold is available for finishing the interior of the sill. Ramped Sill Insert
Insect Screens All insect screens have a long-lasting* fiberglass screen mesh with a charcoal finish and are color matched to the exterior of the door unless otherwise specified. Gliding Insect Screen
Ramped sills provide smooth transition from interior to exterior and can be used with a retractable insect screen, but not a gliding insect screen. Shown here with an Andersen® Frenchwood® patio door. (Specifier must check with local and federal officials to determine if product meets accessibility codes.) Sill Support
An aluminum sill support is designed to lock into a channel under the sill and tie back into the wall. This will offer support to the outermost sill section when needed. Available in neutral gray finish.
For more information about combination designs, product performance, installation accessories and warranty see pages 255-291 or visit
andersenwindows.com
Transoms Andersen Frenchwood patio door transoms feature elegant lines that match our 400 Series Frenchwood gliding patio doors. They feature pine, oak, maple or prefinished White interior options, plus our four standard exterior colors. See pages 171-174 for details.
Stationary units can also be selected for use as sidelights. See pages 171-174 for details.
Exterior Trim Patented square corner joint construction adds considerable strength to the frame members. The insect screen is available for both two-panel doors and four-panel doors. Gliding insect screens have Delrin® injection-molded bottom rollers with selfcontained leveling adjusters, providing smooth operation. Interior and exterior pulls and latch are provided. Retractable Insect Screen
Exterior Keyed Lock
A six-pin key cylinder lock is available in finishes that coordinate with hardware. This lock allows the gliding door to be locked and unlocked from the exterior.
Grilles are available in a variety of configurations and widths. For patio door grille patterns see page 149.
Sidelights
Hardware
For more information about glass, patterned glass, art glass and grilles see pages 10-17.
Grilles
The retractable insect screen is installed on the exterior of the door and opens side-toside across the width of the opening. When the insect screen is not in use, it neatly retracts into a small canister mounted on the exterior of the door. The retractable insect screen canister is available for two-panel patio doors in our four standard exterior colors. Please note, retractable insect screen track reduces clear opening height by 1" (25).
This product is available with Andersen® Exterior Trim. See pages 215-220 for details. CAUTION: • Painting and staining may cause damage to rigid vinyl. • 400 Series windows in Terratone color may be painted any color lighter than Terratone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Terratone any color darker than Terratone. • Do not paint 400 Series windows with White, Sandtone or Forest Green exterior colors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
* Visit andersenwindows.com/warranty or contact your Andersen supplier for details on the 400 Series Limited Warranty. NOTE: Andersen® patio doors are not intended for use as entrance doors. Dimensions in parentheses are in millimeters. “Delrin” is a registered trademark of E.I. du Pont de Nemours and Company.
“Frank Lloyd Wright” is a registered trademark of the Frank Lloyd Wright Foundation.
147
400 Series ® Frenchwood Gliding Patio Doors
The unique Andersen® reachout locking hardware pulls the door panel snugly into the jamb for a weathertight seal and enhanced security.
Glass
FRENCHWOOD GLIDING PATIO DOORS ®
For all four-panel gliding
79 1 ⁄ 8" (2010)
8'-0" (2438)
7'-11 1 ⁄ 2" (2426)
66" (1676)
6'-11" (2108)
6'-10 3 ⁄ 8" (2092)
63 1 ⁄ 8" (1603)
6'-8" (2032)
6'-7 1 ⁄ 2" (2019)
Unobstructed Glass
Minimum Rough Opening
Door Dimension
Three Patio Door Heights
patio doors add 1/4" (6) to the "Minimum Rough Opening" height dimension.
FWG x x 68
FWG x x 611
FWG x x 80
Table of Frenchwood® Gliding Patio Door Sizes Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Door Dimension
2'-8" (813)
4'-11 1 ⁄4" (1505)
4'-11 1 ⁄4" (1505)
9'-9" (2972)
Minimum Rough Opening
2'-8 3 ⁄4" (832)
5'-0" (1524)
5'-0" (1524)
9'-9 3 ⁄4" (2991)
Unobstructed Glass
21 1 ⁄ 8" (537)
21 1 ⁄ 8" (537)
21 1 ⁄ 8" (537)
21 1 ⁄ 8" (537)
(single panel only)
Custom-size doors are available in 1 ⁄ 8" (3) 3 heights
increments. See page 149 for custom sizes and specifications. FWG2968S FWG29611S FWG2980S
Door Dimension
3'-2" (965)
FWG5068R FWG50611R FWG5080R
FWG5068L FWG50611L FWG5080L 5'-11 1 ⁄4" (1810)
FWG10068-4* FWG100611-4* FWG10080-4*
Viewed from the exterior. Arrow indicates 11'-9" (3581)
as a sidelight. Two-panel doors are available
(3600)
factory assembled and arrive at the jobsite
Minimum Rough Opening
3'-2 3 ⁄4" (984)
6'-0" (1829)
6'-0" (1829)
11'-9 3 ⁄4"
Unobstructed Glass
27 1 ⁄ 8" (689)
27 1 ⁄ 8" (689)
27 1 ⁄ 8" (689)
27 1 ⁄ 8" (689)
(single panel only)
direction of panel operation. Stationary (S)
5'-11 1 ⁄4" (1810)
doors can be used as an individual unit or
ready to install. Grille patterns shown on page 149.
3 heights
FWG3368S FWG33611S FWG3380S
FWG6068R FWG60611R FWG6080R
FWG6068L FWG60611L FWG6080L
FWG12068-4* FWG120611-4* FWG12080-4*
Door Dimension
4'-2" (1270)
7'-11 1 ⁄4" (2419)
7'-11 1 ⁄4" (2419)
15'-9" (4801)
Minimum Rough Opening
4'-2 3 ⁄4" (1289)
8'-0" (2438)
8'-0" (2438)
15'-9 3 ⁄4" (4820)
Unobstructed Glass
39 1 ⁄ 8" (994)
39 1 ⁄ 8" (994)
39 1 ⁄ 8" (994)
39 1 ⁄ 8" (994)
(single panel only)
3 heights
FWG4368S FWG43611S FWG4380S
FWG8068L FWG80611L FWG8080L
FWG8068R FWG80611R FWG8080R
FWG16068-4* FWG160611-4* FWG16080-4*
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. *Add 1/4" (6) to the "Minimum Rough Opening" height dimension for four-panel doors.
148
Order Designation Description Viewed from the exterior.
FWG
6068 L
Left Frenchwood® Gliding Gliding Patio Door Door Rough Opening
6068 R
FWG
Right Frenchwood® Gliding Gliding Patio Door Door Rough Opening
FWG
12068– 4
Four-Panel Frenchwood® Gliding Patio Door Door Rough Opening
Custom Sizes and Specification Formulas
CUSTOM WIDTHS
CUSTOM WIDTHS
CUSTOM WIDTHS
CUSTOM HEIGHTS
Minimum R.O.
Two-Panel
Single-Panel & Two-Panel
Unobstr. Glass
= width + 3/4" (19) Height = height + 1/2" (13)
= (width ÷ 2) - 7.773" (197) Height = height - 4.155" (106)
Width
Four-Panel
Four-Panel
= (width ÷ 2) - 14.322" (364) Height = height - 4.155" (106)
Width
Width
Width
= width − 10.876" (276) height − 16.391" (416)
Height =
Two-Panel
= width + 3/4" (19) Height = height + 3/4" (19)
Width
Single-Panel
Width
= width − 17.002" (432) height − 16.391" (416)
Height =
Four-Panel
= width − 32.504" (826) Height = height − 16.391" (416) Width
Available in 1 ⁄ 8" (3) increments between minimum and maximum widths and heights shown. Some restrictions apply.
• Dimensions in parentheses are in millimeters. • Clear Opening formulas provide dimensions for determining area available for egress. Vent opening, or area available for passage of air, is equal to clear opening. Minimum R.O. (minimum rough opening) formulas provide minimum rough opening width and height dimensions. Unobstr. Glass (unobstructed glass) formulas provide dimensions for determining area available for passage of light.
Grille Patterns Prairie A
Colonial
Modified Colonial
Modified Colonial SCR (Simulated Check Rail)
Tall Fractional
Tall Fractional SCR (Simulated Check Rail)
Short Fractional
Short Fractional SCR (Simulated Check Rail)
Frenchwood® Gliding Patio Doors
Number of lights and overall pattern varies with panel size. Patterns are not available in all configurations. Specified equal light and custom patterns are also available. For more information Specified Equal Light Examples
Custom Pattern Examples
on divided light see page 11 or visit andersenwindows.com/grilles. 149
400 Series ® Frenchwood Gliding Patio Doors
Clear Opening
CUSTOM HEIGHTS
109" to 189" (2769) (4801)
78" to 95 1 ⁄ 2" (1981) (2426)
55 1 ⁄4" to 95 1 ⁄4" (1403) (2419)
78" to 95 1 ⁄ 2" (1981) (2426)
30" to 50" (762) (1270)
CUSTOM HEIGHTS
78" to 95 1 ⁄ 2" (1981) (2426)
Measurement guide for custom-size patio doors can be found at andersenwindows.com/measure.
FRENCHWOOD GLIDING PATIO DOORS ®
Two-Panel & Four-Panel Frenchwood® Gliding Patio Door Opening and Area Specifications
Stationary Frenchwood Gliding Patio Door Area Specifications
Clear Opening in Full Open Position Door Number
Clear Opening Area Sq. Ft./(m2)
FWG5068
11.58
(1.08)
22 1/8"
FWG6068
14.72
(1.37)
28 1/8"
FWG8068
21.00
(1.95)
40 1/8"
FWG10068
23.42
(2.18)
44 3/4"
FWG12068
29.70
(2.76)
FWG16068
42.27
FWG50611
Width Inches/(mm)
Glass Area Sq. Ft./(m2)
Height Inches/(mm)
(562)
Vent Area Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
Door Number
Glass Area Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
75 3/8"
(1915)
18.52
(1.72)
11.58
(1.08)
32.71
(3.04)
(714)
75 3/8"
(1915)
23.78
(2.21)
14.72
(1.37)
39.34
(3.66)
FWG2968
9.26
(0.86)
17.67
(1.64)
(1019)
75 3/8"
(1915)
34.30
(3.19)
21.00
(1.95)
52.59
(4.89)
FWG3368
11.89
(1.11)
20.98
(1.95)
(1137)
75 3/8"
(1915)
37.04
(3.44)
23.42
(2.18)
64.59
(6.00)
FWG4368
17.15
(1.59)
27.60
(2.56)
56 3/4"
(1441)
75 3/8"
(1915)
47.55
(4.42)
29.70
(2.76)
77.84
(7.23)
FWG29611
9.68
(0.90)
18.31
(1.70)
(3.93)
80 3/4"
(2051)
75 3/8"
(1915)
68.60
(6.37)
42.27
(3.93)
104.34
(9.69)
FWG33611
12.43
(1.16)
21.74
(2.02)
12.04
(1.12)
22 1/8"
(562)
78 3/16"
(1987)
19.36
(1.80)
12.04
(1.12)
33.89
(3.15)
FWG43611
17.93
(1.67)
28.60
(2.66)
FWG60611
15.31
(1.42)
28 1/8"
(714)
78 3/16"
(1987)
24.86
(2.31)
15.31
(1.42)
40.76
(3.79)
FWG2980
11.60
(1.08)
21.22
(1.97)
FWG80611
21.84
(2.03)
40 1/8"
(1019)
78 3/16"
(1987)
35.85
(3.33)
21.84
(2.03)
54.49
(5.06)
FWG3380
14.90
(1.38)
25.20
(2.34)
FWG100611
24.36
(2.26)
44 3/4"
(1137)
78 3/16"
(1987)
38.72
(3.60)
24.36
(2.26)
66.93
(6.22)
FWG4380
21.49
(2.00)
33.16
(3.08)
FWG120611
30.89
(2.87)
56 3/4"
(1441)
78 3/16"
(1987)
49.71
(4.62)
30.89
(2.87)
80.66
(7.49)
FWG160611
43.95
(4.08)
80 3/4"
(2051)
78 3/16"
(1987)
71.71
(6.66)
43.95
(4.08)
108.12
(10.04)
FWG5080
14.04
(1.30)
22 1/8"
(562)
91 3/8"
(2321)
23.20
(2.16)
14.04
(1.30)
39.29
(3.65)
FWG6080
17.85
(1.66)
28 1/8"
(714)
91 3/8"
(2321)
29.80
(2.77)
17.85
(1.66)
47.25
(4.39)
FWG8080
25.46
(2.37)
40 1/8"
(1019)
91 3/8"
(2321)
42.98
(3.99)
25.46
(2.37)
63.17
(5.87)
FWG10080
28.40
(2.64)
44 3/4"
(1137)
91 3/8"
(2321)
46.40
(4.31)
28.40
(2.64)
77.59
(7.21)
FWG12080 InsectInsect
36.01
(3.35)
56 3/4"
(1441)
91 3/8"
(2321)
59.60
(5.54)
36.01
(3.35)
93.51
(8.69)
51.24
(4.76)
80 3/4"
(2051)
91 3/8"
(2321)
85.96
(7.99)
51.24
(4.76)
125.34
(11.64)
Screen
Screen FWG16080
• Dimensions in parentheses are in square meters.
• Dimensions in parentheses are in millimeters or square meters.
Patio Door Details
Unit Dimension Height
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 Minimum Rough Opening Height Unit Dimension Height
Minimum Rough Opening Height
5 9 ⁄ 165" 9 ⁄ 16" (141)(141) ® Gliding Frenchwood
5 7 ⁄ 16" (138)
5 7 ⁄ 16" (138)
1 3 ⁄ 4" (44)
1 3 ⁄ 4" (44)
4 9 ⁄ 164" 9(116) ⁄ 16" (116) JambJamb DepthDepth
10 9 ⁄10 16" 9 ⁄ 16" (268)(268)
1 5 ⁄ 161" 5 ⁄ 16" (33) (33)
4 9 ⁄ 16" (116) JambJamb 1 5 ⁄ 16" Andersen® Oak Oak (33) Andersen® or Maple Threshold Jamb or Maple Threshold
Jamb Unit Dimension Width Andersen Sill Support Minimum Rough Opening Width Sill Support Sill Sill
3 ⁄ 8Andersen " (10)
3 ⁄ 8"
(10)
Auxiliary Auxiliary Foot Foot Lock Lock
5 3 ⁄ 8"5 (137) 3 ⁄ 8" (137)
Unit Dimension WidthWidth Unit Dimension
3 ⁄ 8" 3 ⁄ 8"
(10) (10)
5 3 ⁄ 8"5 (137) 3 ⁄ 8" (137) 3 ⁄ 8" 3 ⁄ 8" (10) (10)
Active PanelPanel Active
8
JambJamb
5 3 ⁄ 8"5 (137) 3 ⁄ 8" (137) 3 ⁄ 8" 3 ⁄ 8"
(10) (10)
Minimum Rough Opening WidthWidth Minimum Rough Opening Horizontal Section Two-Panel
Stationary PanelPanel Stationary
Gliding insect screen cannot be used with ramped sill.
JambJamb
Meeting Stile Stile Meeting 3 1 ⁄ 8"3 1 ⁄ 8" 3 1 ⁄ 8"3 1 ⁄ 8" (79) (79) (79) (79)
Horizontal Section Stationary
Left Hand Left Hand Meeting Stile Stile Meeting 3 1 ⁄ 8"3 1 ⁄ 8" 3 1 ⁄ 8"3 1 ⁄ 8" (79) (79) (79) (79)
Active PanelPanel Active
Stationary PanelPanel Stationary
5 ⁄ 16"
1
(8)
1 7 ⁄ 16" (37) 1 ⁄ 4Astragal " Astragal (6) 9 4 9 ⁄ 164" 9 ⁄ 16" 4 ⁄ 164" 9 ⁄ 16" (116)(116) (116)(116) Unit Dimension WidthWidth Unit Dimension Minimum Rough Opening WidthWidth Minimum Rough Opening Horizontal Section Four-Panel
150
Stationary PanelPanel Stationary
Active PanelPanel Active
HeadHead
RightRight HandHand Meeting Stile Stile Meeting 1 3 ⁄ 8"3 1 ⁄ 8" 3 1 ⁄ 8"3 1 ⁄ 8" (79) (79) (79) (79)
JambJamb
5 3 ⁄ 8"5 (137) 3 ⁄ 8" (137)
• 4 9/16" (116) jamb depth measurement is from backside of installation flange. • Light-colored areas are ⁄ 164" 9(116) 4 9included parts door. ⁄ 16"with (116) Dark-colored areas are JambJamb Depth Depth additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow 1 5 ⁄ for 161" use 5 ⁄ 16"of building wraps, (33) (33) sill panning, flashing, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration 3 ⁄ 8" 3 ⁄ 8" only and are not intended to (10) (10) represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
Frenchwood® Gliding Patio Door Details Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
13
Insect Screen 1" (25) 13 ⁄ 16" (21) 5 13 ⁄ 16" (148)
4"(102)
Head
10 9 ⁄ 16" (268)
Stationary Panel
Active Panel Head
Unit Dimension Height
Minimum Rough Opening Height
Unit Dimension Height
Minimum Rough Opening Height
5 9 ⁄ 16" (141)
3 ⁄ 8"
Andersen® Oak or Maple Threshold
Meeting 1Stile ⁄ 4" (6) 3 1 ⁄ 8" (79) 1 13 ⁄ 16" (46)
Jamb
3 ⁄ 8"
Andersen Sill Support
3 1 ⁄ 8" (79)
5 3 ⁄ 8" (137)
Andersen® Oak or Maple Threshold (10)
Sill
10 9 ⁄ 16" (268) Jamb 5 3 ⁄ 8" (137)
Unit Dimension Width
Andersen Sill Support
3 ⁄ 8" Gliding insect (10) scr be used with ram
Minimum Rough Opening Width Sill Vertical Section Stationary
Vertical Section
Clear Opening Details
Insect Screen Latch
Active Panel
Active Panel
Active Panel
Stationary Panel
Stationary Panel Head
Jamb
Left Hand Meeting Stile
5 3 ⁄ 8" (137) Clear Opening Width
3 1 ⁄ 8" (79)
3 1 ⁄ 8" (79)
(10)
Passive Panel
Auxiliary Foot Lock
4 9 ⁄ 16" (116)
Minimum Rough Opening Width
Horizontal Section Two-Panel
Stationary Panel
4 9 ⁄ 16" (116)
3 1 ⁄ 8" (79)
3 1 ⁄ 8" (79)
Astragal
Clear Opening Width
Jamb
1 5 ⁄ 16" (33)
3 ⁄ 8" (137) 15 ⁄ 4" (6)
1 13 ⁄ 16" (46)
Unit Dimension Width
Insect Screen
3 ⁄ 8"
Right Hand Meeting Stile
Astragal
4 9 ⁄1 Jam
400 Series ® Frenchwood Gliding Patio Doors
Stationary Panel
Foot Lock
Clear Opening Height
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 Auxiliary
3 ⁄ 8"
(10)
Sill Vertical Section
Active Panel
Stationary Panel
Insect Screen
Horizontal Section Four-Panel • 4 9/16" (116) jamb depth measurement is from backside of installation flange. • Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
151
3⁄ 4"
(95)
3 ⁄ 8"
®
Jamb
Unit Dimension Width
(10)
Minimum Rough Opening Width
3 ⁄ 8"
(10)
Ramped Sill Detail
® Oak or reshold
4"
1 5 ⁄ 16" (33)
FRENCHWOOD GLIDING PATIO DOORS Jamb
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
10 9 ⁄ 16" (268)
(6) 1 13 ⁄ 16" (46) Gliding insect screen cannot be used with ramped sill.
5 ⁄ 16"
8
(8)
1
1 7 ⁄ 16" (37) 1 ⁄ 4"
(6)
Vertical Section
Vertical Joining Detail
Vertical Joining Detail – LVL
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 1 ⁄ 16"
Overall Door Dimension Width
1 ⁄ 16"
(1.5) 1 3 ⁄ 8" (35) 1 3 ⁄ 4" (44)
1 3 ⁄ 4" (44)
(1.5)
3 ⁄ 4"
Overall Door ⁄ 4" (44) Width 1 3 1⁄ 8Dimension "3 (35)
(19)
Sum of individual door widths
Sum of individual door widths
plus 1 ⁄ 16" (1.5) for each join.
plus
Overall Rough Opening Width
Overall Rough Opening Width
Overall door width plus 3 ⁄ 4" (19).
Overall door width plus 3 ⁄ 4" (19).
1 ⁄ 16"
1 ⁄ 16"
(1.5)
3 ⁄ 4"
3 ⁄ 4"
1 3 ⁄ 4" (44) 1 3 ⁄ 8" (35)
(19)
1 3 ⁄ 8" (35) 1 3 ⁄ 8" (35)
(19) for each join.
(1.5)
3 ⁄ 4"
(19)
3 ⁄ 4"
Andersen® (19) Filler and Vinyl Trim
Horizontal Section Frenchwood® Gliding to Frenchwood Gliding
Horizontal Section Frenchwood® Gliding to Frenchwood Gliding
Andersen does not recommend joining of receiver jamb to receiver jamb. For more joining information see the combination designs section starting on page 255.
Separate Rough Openings Detail Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 3 ⁄ 4"
(19) or to achieve a wider joined To meet structural requirements 1 3 ⁄ 4" (44)
1 3 ⁄ 8" (35)
2" (51)
1 3 ⁄ 4" (44)
1 3 ⁄ 8" (35)
appearance, doors may be installed into separate rough openings having vertical support (by others) in combination with Andersen® exterior filler and exterior vinyl trim. Vertical Support by Others
3 ⁄ 4"
(19)
Andersen® Filler and Vinyl Trim
2" (51)
Horizontal Section Frenchwood® Gliding and Frenchwood Gliding • Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Andersen recommends installation of doors into separate rough openings. Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. • Dimensions in parentheses are in millimeters.
152
2" (51)
2" (51)
An Fi
FRENCHWOOD HINGED PATIO DOORS – INSWING ®
CUSTOM SIZING
SECTION REFERENCE Table of Sizes ...................... 156-157 Specifications ............................ 158 Custom Sized Doors ................... 159 Grille Patterns ............................ 159 Door Details ........................ 160-162 Joining Details............................ 162 Door Sidelights & Transoms ....... 171 Combination Designs ................. 255 Performance Data ...................... 269 Warranty .............................290-291 Dimensions in parentheses are in millimeters.
400 Series ® Frenchwood Hinged Patio Doors – Inswing
in 1⁄8" (3) increments
FRENCHWOOD HINGED PATIO DOORS — INSWING ®
C
FEATURES Frame A The sill is made with three-piece construction. The subsill is made of Fibrex® material, and the sill step is solid oak. The exterior sill member is made of extruded aluminum with an attractive wear-resistant, heat-baked finish in a neutral color. This combination of materials combines durability and low maintenance with excellent insulating characteristics.
Glass G Panels are silicone bed glazed and
H
finished with an interior wood stop.
G
H High-performance glass
B
• Low-E4 tempered glass • Low-E4® HeatLock™ tempered glass • Low-E4® Sun tempered glass • Low-E4® SmartSun™ tempered glass • Low-E4® SmartSun™ HeatLock™ tempered glass
D
E
F
A
A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite.
C The exterior frame members are attached to a water-repellent preservativetreated wood subframe for long-lasting* protection and performance. The subframe is grooved to accept extension jambs.
Mortise-and-Tenon Joints
EXTERIOR
E Panel interior surfaces are unfinished pine veneer. Unfinished oak and maple veneers are available as options. Lowmaintenance prefinished White interiors are also available. Hinged inswing operating panels are lefthand active, right-hand active or two-panel active/passive jamb hinged.
F A factory-applied, one-piece compression-type rubber weatherstrip continues in one plane around the panel to provide maximum effectiveness against water and air infiltration. The corners of the weatherstrip are welded to eliminate gaps between the panel and the frame/sill shoulder.
Multi-Point Locking System
The multi-point locking system, with a hook bolt above and below the center dead bolt, provides a weathertight seal and enhanced security.
INTERIOR Prefinished White interiors are only available on units with White exteriors.
Panel D The exterior of the wood door panel is protected with a long-lasting* urethane base finish in White, Sandtone, Terratone or Forest Green color.
®
Additional glass options are available. Contact your Andersen supplier.
B All basic exterior frame members are fiberglass reinforced composite, which maintains an attractive appearance while minimizing maintenance.
Patterned glass options are available. See page 10 for more details.
Hardware
options include: ®
Patterned Glass
White
Sandtone
Pine
White
Terratone
Forest Green
Maple
Oak
Mortise-and-tenon joints prevent panel sag and maintain smooth operation. Adjustable Hinges Adjustable hinges are standard on inswing patio doors and have ball-bearing pivots for smooth, frictionless movement. Features easy horizontal and vertical adjustment, plus quick-release Showninin Shown GoldDust Dustfifinish. nish. Gold feature for easy panel removal. This release feature is ideal for transporting large units up stairs or to other hard-to-reach areas. Gold dust finish is standard on wood interior doors. For units with a prefinished White interior, white finish hinges are standard. Also available in finishes that coordinate with hardware.
Naturally occurring variations in grain, color and texture of wood make each door one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
HARDWARE FINISHES
Antique Brass
Black
Bright Brass
Gold Dust
Oil Rubbed Polished Bronze Chrome
Brushed Chrome
Distressed Distressed Bronze Nickel
Satin Nickel
Stone
White
Distressed bronze and oil rubbed bronze are "living" finishes that will change with time and use.
HINGED PATIO DOOR HARDWARE OPTIONS Bold name denotes finish shown. **
YUMA®
ENCINO ®
ANVERS ®
NEWBURY ®
COVINGTON ™
WHITMORE ®
ALBANY
TRIBECA®
Distressed Bronze Distressed Nickel
Distressed Bronze Distressed Nickel
Bright Brass Oil Rubbed Bronze Satin Nickel
Antique Brass Bright Brass Brushed Chrome Oil Rubbed Bronze Polished Chrome Satin Nickel
Antique Brass Bright Brass Oil Rubbed Bronze
Antique Brass Bright Brass Oil Rubbed Bronze Satin Nickel
Black Gold Dust Stone White
Stone White
* Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 400 Series Limited Warranty. ** Hardware sold separately. Dimensions in parentheses are in millimeters.
Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
154
Tribeca and Albany hardware are zinc diecast with powder-coated durable finish. Other hardware is solid forged brass. Mix-and-match interior and exterior style and finish options are available. Bright brass and satin nickel finishes feature a 10-year limited warranty.
ACCESSORIES Sold Separately Ramped Sill Insert
Interior Extension Jambs Standard jamb depth is 4 9/16" (116). Pine, oak or maple veneer or prefinished White extension jambs are available in 1⁄16" (1.5) increments between 5 1⁄16" (129) and 7 1⁄8" (181). Interior extension jambs on inswing units will restrict the full opening of door. Bright brass, antique brass, polished chrome, oil rubbed bronze, brushed chrome and satin nickel strike plate extensions are available for two-panel astragal hinged and single-hinge doors.
Ramped sills provide smooth transition from interior to exterior. Shown here with an Andersen® Frenchwood® patio door. It cannot be used with hinged or gliding insect screens. (Specifier must check with local and federal officials to determine if product meets accessibility codes.)
Exterior Extension Jambs
Hardware
Exterior extension jamb system is available for the following wall thicknesses: • 5 1/4" (133) • 6 9/16" (167) • 7 1/8" (181) In walls over 4 1/2" (114), the exterior sill extender and exterior extension jamb system allow the unit to be installed flush to the interior, so the hinged doors will open flat against the interior wall. Colored to match the exterior of the finished unit, this system provides a low-maintenance, finished exterior appearance. An extended double-insect screen track is available for jamb-hinged doors that require gliding insect screens. Exterior jamb kits are available with or without the double-insect screen track.
Exterior Keyed Lock
Threshold
A six-pin key cylinder lock is available in styles and finishes that coordinate with hardware. This lock allows the hinged patio door to be locked and unlocked from the exterior. Handle Extension Extends interior door handle an additional 1" (25) from the door panel to accommodate interior blinds or shades. Kit includes one handle extender and spindle. A second extender may be added to the spindle to increase the length an additional 1" (25) to a 2" (51) total extension. Extenders are available in finishes that coordinate with hardware. Strike Plate Extensions
An oak or maple threshold is available for finishing the interior of the sill. Sill Support
Bright brass, antique brass, polished chrome, oil rubbed bronze, brushed chrome and satin nickel strike plate extensions are available for single-hinge doors.
Panel Stop
Glass
This hinged door panel stop helps prevent wall damage when opening the inswing door. Available in finishes that coordinate with hardware.
Andersen ® Art Glass Andersen art glass panels come in a variety of original patterns, including four Frank Lloyd Wright ® Series designs. See pages 213-214 for details on Andersen art glass. Visit andersenwindows.com/artglass for details and pattern information.
Insect Screens
Grilles
All insect screens have a long-lasting* fiberglass screen mesh with a charcoal finish and are color matched to the exterior of the door unless otherwise specified.
Grilles are available in a variety of configurations and widths. For patio door grille patterns see page 159.
Gliding Insect Screen
Sidelights & Transoms
Available for all two- and three-panel doors. Features Delrin® material injection molded bottom rollers with self-contained leveling adjusters. A double-insect screen track kit and two universal gliding insect screens are required for installation. Gliding insect screens are not available for 4'-0" (1219) wide doors. Double-Insect Screen Track
An extended insect screen track is available for jamb-hinged doors that use gliding insect screens. Hinged Insect Screens
Available for the following wall thicknesses: • 5 1/4" (133) • 6 9/16" (167) • 7 1/8" (181)
Sidelights and transoms are available for all Frenchwood hinged patio doors. See pages 171-174 for details.
Exterior Trim This product is available with Andersen® Exterior Trim. See pages 215-220 for details. CAUTION: • Painting and staining may cause damage to rigid vinyl. • 400 Series windows in Terratone color may be painted any color lighter than Terratone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Terratone any color darker than Terratone. • Do not paint 400 Series windows with White, Sandtone or Forest Green exterior colors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
Construction Lock An aluminum sill support is designed to lock into a channel under the sill and tie back into the wall. This will offer support to the outermost sill section when needed. Available in neutral gray finish. For more information about glass, patterned glass, art glass and grilles see pages 10-17. For more information about combination designs, product performance, installation accessories and warranty see pages 255-291.
Available for single-panel hinged doors and two-panel jamb-hinged doors.
* Visit andersenwindows.com/warranty or contact your
This hardware can be used on all Andersen hinged doors to help secure the jobsite during the construction phase of the project. It features an undersized escutcheon plate, which makes on-site finishing easier.
Andersen supplier for details on the 400 Series Limited Warranty. NOTE: Andersen® patio doors are not intended for use as entrance doors. Dimensions in parentheses are in millimeters. “Delrin” is a registered trademark of E.I. du Pont de Nemours and Company. “Frank Lloyd Wright” is a registered trademark of the Frank Lloyd Wright Foundation.
155
400 Series ® Frenchwood Hinged Patio Doors – Inswing
Frame
FRENCHWOOD HINGED PATIO DOORS — INSWING ®
Table of Frenchwood® Hinged Inswing Patio Door Sizes Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Door Dimension
2'-0 1 ⁄ 2" (620)
4'-0" (1219)
4'-0" (1219)
Minimum Rough Opening
2'-1" (634)
4'-1" (1242)
4'-1" (1242)
Unobstructed Glass
13 1 ⁄4" (336)
13 1 ⁄4" (336)
13 1 ⁄4" (336)
(single panel only)
Custom-size doors are available in 1 ⁄ 8" (3)
3 heights
increments. See page FWH2168S FWH21611S FWH2180S
159 for custom sizes
FWH4168APLR FWH4168PALR FWH41611APLR FWH41611PALR FWH4180APLR FWH4180PALR
and specifications.
Door Dimension
2'-6 1 ⁄ 8" (765)
2'-6 1 ⁄ 8" (765)
2'-6 1 ⁄ 8" (765)
4'-11 1 ⁄4" (1504)
4'-11 1 ⁄4" (1504)
4'-11 1 ⁄4" (1504)
4'-11 1 ⁄4" (1504)
4'-11 1 ⁄4" (1504)
Minimum Rough Opening
2'-7" (787)
2'-7" (787)
2'-7" (787)
5'-0" (1524)
5'-0" (1524)
5'-0" (1524)
5'-0" (1524)
5'-0" (1524)
can be used as an
Unobstructed Glass
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
sidelight.
(single panel only)
Stationary (S) doors individual unit or as a
Grille patterns shown on page 159. 3 heights
FWH2768S FWH2768AR FWH2768AL FWH5068SS FWH27611S FWH27611AR FWH27611AL FWH50611SS FWH2780S FWH2780AR FWH2780AL FWH5080SS
FWH5068ASR FWH50611ASR FWH5080ASR
FWH5068SAL FWH50611SAL FWH5080SAL
FWH5068APLR FWH5068PALR FWH50611APLR FWH50611PALR FWH5080APLR FWH5080PALR
Door Dimension
2'-8 1 ⁄ 8" (816)
2'-8 1 ⁄ 8" (816)
2'-8 1 ⁄ 8" (816)
5'-3 1 ⁄4" (1607)
5'-3 1 ⁄4" (1607)
5'-3 1 ⁄4" (1607)
5'-3 1 ⁄4" (1607)
5'-3 1 ⁄4" (1607)
Minimum Rough Opening
2'-9" (838)
2'-9" (838)
2'-9" (838)
5'-4" (1626)
5'-4" (1626)
5'-4" (1626)
5'-4" (1626)
5'-4" (1626)
Unobstructed Glass
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
(single panel only)
3 heights
FWH2968S FWH2968AR FWH2968AL FWH5468SS FWH29611S FWH29611AR FWH29611AL FWH54611SS FWH2980S FWH2980AR FWH2980AL FWH5480SS
FWH5468ASR FWH54611ASR FWH5480ASR
FWH5468SAL FWH54611SAL FWH5480SAL
FWH5468APLR FWH54611APLR FWH5480APLR
FWH5468PALR FWH54611PALR FWH5480PALR
Door Dimension
3'-0 1 ⁄ 8" (918)
3'-0 1 ⁄ 8" (918)
3'-0 1 ⁄ 8" (918)
5'-11 1 ⁄4" (1810)
5'-11 1 ⁄4" (1810)
5'-11 1 ⁄4" (1810)
5'-11 1 ⁄4" (1810)
5'-11 1 ⁄4" (1810)
Minimum Rough Opening
3'-1" (940)
3'-1" (940)
3'-1" (940)
6'-0" (1829)
6'-0" (1829)
6'-0" (1829)
6'-0" (1829)
6'-0" (1829)
Unobstructed Glass
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
(single panel only)
3 heights
FWH3168S FWH3168AR FWH3168AL FWH6068SS FWH31611S FWH31611AR FWH31611AL FWH60611SS FWH3180S FWH3180AR FWH3180AL FWH6080SS
FWH6068ASR FWH60611ASR FWH6080ASR
FWH6068SAL FWH60611SAL FWH6080SAL
FWH6068APLR FWH60611APLR FWH6080APLR
FWH6068PALR FWH60611PALR FWH6080PALR
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
156
FWH x x 68
79 1 ⁄ 2" (2019)
8'-0" (2438)
7'-11 1 ⁄ 2" (2426)
66 3 ⁄ 8" (1686)
6'-11" (2108)
6'-10 3 ⁄ 8" (2092)
63 1 ⁄ 2" (1613)
6'-8" (2032)
6'-7 1 ⁄ 2" (2019)
Unobstructed Glass
Minimum Rough Opening
Door Dimension
Three Patio Door Heights
FWH x x 611
FWH x x 80
Order Designation Description Viewed from the exterior.
6068 S
A
FWH
L
Left Frenchwood® Stationary Hinged Hinged Inswing Panel Patio Door Door Rough Active Opening Panel
6068 A
S R
Active Panel Right Frenchwood® Hinged Hinged Inswing Patio Door Door Rough Stationary Opening Panel
7'-11 1 ⁄ 8" (2416)
7'-11 1 ⁄ 8" (2416)
7'-11 1 ⁄ 8" (2416)
8'-0" (2438)
8'-0" (2438)
8'-0" (2438)
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
FWH8068SASR FWH80611SASR FWH8080SASR
FWH8068SASL FWH80611SASL FWH8080SASL
FWH8068SSS FWH80611SSS FWH8080SSS 8'-11 1 ⁄ 8" (2721)
8'-11 1 ⁄ 8" (2721)
8'-11 1 ⁄ 8" (2721)
9'-0" (2743)
9'-0" (2743)
9'-0" (2743)
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
FWH9068SSS FWH90611SSS FWH9080SSS
FWH9068SASR FWH90611SASR FWH9080SASR
FWH
6068 A
P
L
R
Frenchwood® Left Active Panel (panel used Hinged Inswing Hinged most often) Patio Door Door Rough Passive Right Opening Panel Hinged
FWH
9068 S
A
S
R
Frenchwood® Stationary Stationary Hinged Inswing Panel Panel Patio Door Door Rough Active Right Opening Panel Hinged
400 Series ® Frenchwood Hinged Patio Doors – Inswing
FWH
FWH9068SASL FWH90611SASL FWH9080SASL
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
157
FRENCHWOOD HINGED PATIO DOORS — INSWING ®
Frenchwood® Hinged Inswing Patio Door Opening and Area Specifications Door Number
Number of Panels in Open Position*
Clear Opening Maximums Clear Opening Area Sq. Ft./(m2)
90° Width Inches/(mm)
Full Width Inches/(mm)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Area Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
FWH2168S
-
FWH2768
1
12.98
(1.21)
24 13/16"
(630)
26"
(660)
75 1/4"
(1911)
FWH2968
1
14.02
(1.30)
26 13/16"
(681)
28"
(711)
75 1/4"
(1911)
9.20
(0.86)
14.02
(1.30)
17.74
(1.65)
FWH3168
1
16.11
(1.50)
30 13/16"
(783)
32"
(813)
75 1/4"
(1911)
10.96
(1.02)
16.11
(1.50)
19.95
(1.85)
FWH4168
2
21.43
(1.99)
41"
(1039)
43 7/8"
(1112)
75 1/4"
(1911)
11.68
(1.09)
21.43
(1.99)
26.50
(2.46)
FWH4168
1
11.01
(1.02)
19 7/8"
(505)
21 1/16"
(535)
75 1/4"
(1911)
11.68
(1.09)
11.01
(1.02)
26.50
(2.46)
FWH5068
1 - AS/SA
12.98
(1.21)
24 13/16"
(630)
26"
(660)
75 1/4"
(1911)
16.64
(1.55)
12.98
(1.21)
32.71
(3.04)
FWH5068
2 - AP/PA
27.30
(2.54)
52 1/4"
(1327)
55 1/8"
(1400)
75 1/4"
(1911)
16.64
(1.55)
27.30
(2.54)
32.71
(3.04)
FWH5068
1 - AP/PA
13.32
(1.23)
25 1/2"
(647)
26 11/16"
(678)
75 1/4"
(1911)
16.64
(1.55)
13.32
(1.23)
32.71
(3.04)
FWH5468
1 - AS/SA
14.02
(1.30)
26 13/16"
(681)
28"
(711)
75 1/4"
(1911)
18.39
(1.71)
14.02
(1.30)
34.92
(3.24)
FWH5468
2 - AP/PA
29.39
(2.73)
56 1/4"
(1429)
59 1/8"
(1502)
75 1/4"
(1911)
18.39
(1.71)
29.39
(2.73)
34.92
(3.24)
FWH5468
1 - AP/PA
14.37
(1.33)
27 1/2"
(698)
28 11/16"
(729)
75 1/4"
(1911)
18.39
(1.71)
14.37
(1.33)
34.92
(3.24)
FWH6068
1 - AS/SA
16.11
(1.50)
30 13/16"
(783)
32"
(813)
75 1/4"
(1911)
21.92
(2.04)
16.11
(1.50)
39.34
(3.66)
FWH6068
2 - AP/PA
33.58
(3.12)
64 1/2"
(1632)
67 1/8"
(1705)
75 1/4"
(1911)
21.92
(2.04)
33.58
(3.12)
39.34
(3.66)
FWH6068
1 - AP/PA
16.46
(1.52)
31 1/2"
(800)
32 11/16"
(830)
75 1/4"
(1911)
21.92
(2.04)
16.46
(1.52)
39.34
(3.66)
FWH8068
1
14.02
(1.30)
26 13/16"
(681)
28"
(711)
75 1/4"
(1911)
27.60
(2.56)
14.02
(1.30)
52.52
(4.88)
FWH9068
1
16.11
(1.50)
30 13/16"
(783)
32"
(813)
75 1/4"
(1911)
32.88
(3.06)
16.11
(1.50)
59.14
(5.49)
FWH21611S
-
6.01
(0.56)
FWH27611
1
13.48
(1.25)
24 13/16"
(630)
26"
(660)
78 1/8"
(1984)
8.69
(0.81)
FWH29611
1
14.55
(1.35)
26 13/16"
(681)
28"
(711)
78 1/8"
(1984)
9.61
(0.89)
14.55
(1.35)
18.36
(1.71)
FWH31611
1
16.72
(1.55)
30 13/16"
(783)
32"
(813)
78 1/8"
(1984)
11.45
(1.06)
16.72
(1.55)
20.64
(1.92)
FWH41611
2
22.24
(2.07)
41"
(1039)
43 7/8"
(1112)
78 1/8"
(1984)
12.20
(1.13)
22.24
(2.07)
27.46
(2.55)
FWH41611
1
11.43
(1.06)
19 7/8"
(505)
21 1/16"
(535)
78 1/8"
(1984)
12.20
(1.13)
11.43
(1.06)
27.46
(2.55)
FWH50611
1 - AS/SA
13.48
(1.25)
24 13/16"
(630)
26"
(660)
78 1/8"
(1984)
17.38
(1.62)
13.48
(1.25)
33.89
(3.15)
FWH50611
2 - AP/PA
28.34
(2.63)
52 1/4"
(1327)
55 1/8"
(1400)
78 1/8"
(1984)
17.38
(1.62)
28.34
(2.63)
33.89
(3.15)
FWH50611
1 - AP/PA
13.83
(1.28)
25 1/2"
(647)
26 11/16"
(678)
78 1/8"
(1984)
17.38
(1.62)
13.83
(1.28)
33.89
(3.15)
FWH54611
1 - AS/SA
14.55
(1.35)
26 13/16"
(681)
28"
(660)
78 1/8"
(1984)
19.22
(1.79)
14.55
(1.35)
36.18
(3.36)
FWH54611
2 - AP/PA
30.51
(2.83)
56 1/4"
(1429)
59 1/8"
(1502)
78 1/8"
(1984)
19.22
(1.79)
30.51
(2.83)
36.18
(3.36)
FWH54611
1 - AP/PA
14.91
(1.58)
27 1/2"
(698)
28 11/16"
(729)
78 1/8"
(1984)
19.22
(1.79)
14.91
(1.58)
36.18
(3.36)
FWH60611
1 - AS/SA
16.72
(1.55)
30 13/16"
(783)
32"
(813)
78 1/8"
(1984)
22.91
(2.13)
16.72
(1.55)
40.76
(3.79)
FWH60611
2 - AP/PA
34.86
(3.24)
64 1/2"
(1632)
67 1/8"
(1705)
78 1/8"
(1984)
22.91
(2.13)
34.86
(3.24)
40.76
(3.79)
FWH60611
1 - AP/PA
17.08
(1.68)
31 1/2"
(800)
32 11/16"
(830)
78 1/8"
(1984)
22.91
(2.13)
17.08
(1.68)
40.76
(3.79)
FWH80611
1
14.55
(1.35)
26 13/16"
(681)
28"
(660)
78 1/8"
(1984)
28.83
(2.68)
14.55
(1.35)
54.43
(5.06)
FWH90611
1
16.72
(1.55)
30 13/16"
(783)
32"
(813)
78 1/8"
(1984)
34.36
(3.19)
16.72
(1.55)
61.30
(5.70)
FWH2180S
-
7.19
(0.67)
FWH2780
1
15.73
(1.46)
24 13/16"
(630)
26"
(660)
91 1/4"
(2318)
10.41
(0.97)
15.73
FWH2980
1
17.00
(1.58)
26 13/16"
(681)
28"
(711)
91 1/4"
(2318)
11.52
(1.07)
FWH3180
1
19.54
(1.82)
30 13/16"
(783)
32"
(813)
91 1/4"
(2318)
13.72
(1.28)
FWH4180
2
25.98
(2.41)
41"
(1039)
43 7/8"
(1112)
91 1/4"
(2318)
14.62
FWH4180
1
13.35
(1.24)
19 7/8"
(505)
21 1/16"
(535)
91 1/4"
(2318)
FWH5080
1 - AS/SA
15.73
(1.46)
24 13/16"
(630)
26"
(660)
91 1/4"
FWH5080
2 - AP/PA
33.11
(3.08)
52 1/4"
(1327)
55 1/8"
(1400)
FWH5080
1 - AP/PA
16.15
(1.50)
25 1/2"
(647)
26 11/16"
FWH5480
1 - AS/SA
17.00
(1.58)
26 13/16"
(681)
FWH5480
2 - AP/PA
35.64
(3.31)
56 1/4"
FWH5480
1 - AP/PA
17.42
(1.61)
FWH6080
1 - AS/SA
19.54
FWH6080
2 - AP/PA
FWH6080
-
-
-
-
-
-
-
-
-
-
-
-
5.74
(0.53)
8.32
(0.77)
12.98
(1.21)
13.48
(1.25)
(1.24) (1.55)
13.89
(1.29)
17.21
(1.60)
16.08
(1.49)
(1.46)
19.98
(1.86)
17.00
(1.58)
21.31
(1.98)
19.54
(1.82)
23.96
(2.23)
(1.36)
25.98
(2.41)
31.83
(2.96)
14.62
(1.36)
13.35
(1.24)
31.83
(2.96)
(2318)
20.82
(1.93)
15.73
(1.46)
39.30
(3.65)
91 1/4"
(2318)
20.82
(1.93)
33.11
(3.08)
39.30
(3.65)
(678)
91 1/4"
(2318)
20.82
(1.93)
16.15
(1.50)
39.30
(3.65)
28"
(660)
91 1/4"
(2318)
23.03
(2.14)
17.00
(1.58)
41.95
(3.90)
(1429)
59 1/8"
(1502)
91 1/4"
(2318)
23.03
(2.14)
35.64
(3.31)
41.95
(3.90)
27 1/2"
(698)
28 11/16"
(729)
91 1/4"
(2318)
23.03
(2.14)
17.42
(1.61)
41.95
(3.90)
(1.82)
30 13/16"
(783)
32"
(813)
91 1/4"
(2318)
27.44
(2.55)
19.54
(1.82)
47.25
(4.39)
40.71
(3.78)
64 1/2"
(1632)
67 1/8"
(1705)
91 1/4"
(2318)
27.44
(2.55)
40.71
(3.78)
47.25
(4.39)
1 - AP/PA
19.96
(1.85)
31 1/2"
(800)
32 11/16"
(830)
91 1/4"
(2318)
27.44
(2.55)
19.96
(1.85)
47.25
(4.39)
FWH8080
1
17.00
(1.58)
26 13/16"
(681)
28"
(660)
91 1/4"
(2318)
34.55
(3.21)
17.00
(1.58)
63.09
(5.86)
FWH9080
1
19.54
(1.82)
30 13/16"
(783)
32"
(813)
91 1/4"
(2318)
41.16
(3.82)
19.54
(1.82)
71.05
(6.60)
• Dimensions in parentheses are in millimeters. *For two-panel AP/PA doors with only one panel open, clear opening is based on the active panel open and the passive panel closed.
158
-
13.39 16.63
CUSTOM WIDTHS
CUSTOM WIDTHS
CUSTOM WIDTHS
Clear Opening
Height =
CUSTOM HEIGHTS
Minimum R.O.
height - 4.22" (107)
= width + 3/4" (19) height + 1/2" (13)
Unobstr. Glass
Height =
Single-Panel Width
Width
CUSTOM HEIGHTS
77 3 ⁄ 8" to 107 1 ⁄ 8" (1965) (2721)
78" to 95 1 ⁄ 2" (1981) (2426)
48" to 74 1 ⁄4" (1219) (1886)
78" to 95 1 ⁄ 2" (1981) (2426)
24 1 ⁄ 2" to 38 1 ⁄ 8" (622) (968)
CUSTOM HEIGHTS
78" to 95 1 ⁄ 2" (1981) (2426)
Custom Sizes and Specification Formulas
Width
= width - 5.744" (145)
Two-Panel Width
= width - 7.394" (187)
Available in 1 ⁄ 8" (3) increments between minimum and maximum
Three-Panel
= (width - 10.550" (267)) ÷ 2
= width − 32.55" (827) Height = height - 16.05" (408) Width
Three-Panel Width
= width − 21.5" (546) height − 16.05" (408)
Height =
Two-Panel, one panel open Width
= width − 11.22" (285) height − 16.05" (408)
Height =
Two-Panel, two panels open Width
Single-Panel
= (width - 16.106" (409)) ÷ 3
widths and heights. Some restrictions apply. Measurement guide can be found at
• Dimensions in parentheses are in millimeters. • Clear Opening formulas provide dimensions for determining area available for egress. Vent opening, or area available for passage of air, is equal to clear opening. Minimum R.O. (minimum rough opening) formulas provide minimum rough opening width and height dimensions. Unobstr. Glass (unobstructed glass) formulas provide dimensions for determining area available for passage of light. • Clear opening width formulas are based on panel(s) in a 90° open position.
andersenwindows.com/measure.
Grille Patterns Prairie A
Colonial
Modified Colonial
Modified Colonial SCR
(Simulated Check Rail)
Tall Fractional
Tall Fractional SCR
(Simulated Check Rail)
Short Fractional
Short Fractional SCR
(Simulated Check Rail)
Frenchwood® Hinged Inswing Patio Doors
400 Series ® Frenchwood Hinged Patio Doors – Inswing
Number of lights and overall pattern varies with panel size. Patterns are not available in all configurations. Specified equal light and custom patterns are also available. For more information on divided light see page 11 or visit andersenwindows.com/grilles. Specified Equal Light Examples
Custom Pattern Examples
Interior Extension Jambs Use of interior extension jambs or drywall return will restrict panel operation on jamb-hinged patio doors. Jamb-hinged patio doors must be installed flush to
Full Panel Operation Installed Flush to Interior Wall
the interior to achieve full panel operation.
Restricted Panel Operation Andersen® Interior Extension Jamb
Andersen® Exterior Extension Jamb
Jamb-Hinged Patio Door in 2 x 6 Wall without Interior Extension Jambs
Jamb-Hinged Patio Door in 2 x 6 Wall with Interior Extension Jambs
159
FRENCHWOOD HINGED PATIO DOORS — INSWING ®
Frenchwood® Hinged Inswing Patio Door Details Clear Opening Height
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Head
Ander Exteri Exten
1 ⁄ 2"
(13) 1 11 ⁄ 16" (43)
Andersen® Exterior Extension Jamb
Sill Hinged Insect (116) Screen Jamb Depth
Rough Opening Height
Unit Dimension Height
4 9 ⁄ 16"
4 9 ⁄ 16" (116) Jamb Depth
Head Jamb 3 ⁄ 8" (10)
1 5 ⁄ 16" (33)
Jamb Unit Dimension Width
Handle Hardware
Jamb Jamb Jamb 3 ⁄ 8" Unit Dimension Width 3(10) Unit Dimension Width ⁄ 8" (10) 3 ⁄ 8" 3 ⁄ 8" (10) (10) MinimumWidth Rough Opening Width Minimum Rough Opening
Minimum Rough Opening Width
Hinged Insect Screen
Andersen Exterior Extension Jamb
Andersen® Oak or Maple Threshold
1 5 ⁄ 16" (33)
Jamb 3 ⁄ 8"
(10)
Ander Sill Ex
Horizontal Section Active
Andersen Sill Extender Andersen Sill Support
Active Panel 5 5 ⁄ 8" 1" (25)
(143) Sill
Passive Panel
5 1 ⁄ 8" (130)
Panel 5 ⁄ 8" (143) 5Active
5 1 ⁄ 8" (130) 5 5 ⁄ 8"
Vertical Section
Passive Panel
5 1 ⁄ 8" 1" (130) (25)
(143)
5 1 ⁄ 8" (130)
5 5 ⁄ 8" (143)
1" (25)
1" (25) 4 9 ⁄ 16" (116) Jamb Depth
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33) Andersen Double-Insect Screen Track Kit Jamb 3 ⁄ 8"
(10)
Hinge Scree
Jamb
3 ⁄ 8" (10) Unit Dimension Width
4 9 ⁄ 16" (116) Astragal Jamb Jamb Depth 50 = 2'-5 5 ⁄ 8" (752)* 50 = 2'-5 5 ⁄ 8" (752)* C Jamb L 54 = 2'-7 5 ⁄ 8" (803)* 5 54 = 2'-7 5 ⁄ 8" (803)* Andersen 50 = 2'-5 ⁄ 8" (752)* 1 5 ⁄ 16" 60 = 2'-11 5 ⁄ 8" (905)* 5 60 = 2'-11 5 ⁄ 8" (905)* Double-Insect 54 = 2'-7 ⁄ 8" (803)* (33) Screen 60 = 2'-11 5 ⁄ 8" (905)* Jamb Unit Track Dimension Kit Width
Minimum Rough Opening Width
3 ⁄ 8"Minimum
(10)
Active Panel5 5 ⁄ 8" (143)
Astragal 50 = 2'-5 5 ⁄ 8" (752)* 54 = 2'-7 5 ⁄ 8" (803)* 60 = 2'-11 5 ⁄ 8" (905)*
CL
Jamb
3 ⁄ 8" (10) Unit Dimension Width
Rough Opening Width 3 ⁄ 8" (10)
3 ⁄ 8"
Minimum Rough Opening Width
(10)
Horizontal Section Two-Panel
Horizontal Section Stationary Stationary Panel
1 5 ⁄ 16" (33)
Active Panel
5 5 ⁄ 16 " (135)Panel 5 5 ⁄ 16" (135) Passive
Stationary Panel 5 5 ⁄ 16" (135)
Stationary Panel 5 5 ⁄ 16" (135)
4 /16" (116) jamb depth Stationary• Panel 9
Active 5 5 ⁄ 8" Panel (143)
measurement is from backside 5 of installation flange. (135) (135) 5 5 ⁄ 8" (143) 5 5 ⁄ 16" (135) 5 5 ⁄ 16" (135) 1" (25) 1" (25) 5 1 ⁄ 8" (130) 5 1 ⁄ 8" (130) 5 5 ⁄ 8" (143) 5 5 ⁄ 8" (143) 5 ⁄ 8" (143) • Light-colored areas are 1" (25) 1" (25) parts included with door. Dark1" (25) colored areas are additional ® Andersen parts required to complete door assembly as 4 9 ⁄ 16" (116) shown. Jamb Depth 4 9 ⁄ 16" (116) 4 9 ⁄ 16 • Rough openings may need to Jamb Depth Jamb be increased to allow for use of building wraps, flashing, 1 5 ⁄ 16" sill panning, brackets, (33) 1 5 ⁄ 16" 1 5 ⁄ 16 fasteners or other items. See Astragal Jamb Jamb (33)Astragal (33) installation information on pages 288-289. Astragal Astragal Jamb 80 =Astragal 2'-7 13 ⁄ 16" (808)* 80 =Jamb 2'-7 1 ⁄ 2" (800)* 80 = 2'-7 13 ⁄ 16" (808)* CL CL Jamb Jamb • Details are for illustration 90 = 2'-11 13 ⁄ 16" (910)* 90 = 2'-11 1 ⁄ 2" (902)*13 90 = 2'-11 13 ⁄ 16" (910)*1 50 = 2'-5 5 ⁄ 8" (752)* 80 = 2'-7 ⁄ 16" (808)* 50 = 2'-5 5 ⁄ 8" (752)* 80 = 2'-7 ⁄ 2" (800)* " (808)* 80 = 2'-7 13 ⁄ 16 only and are not intended to CL CL C L product installation 54 = 2'-7 5 ⁄ 8" (803)* Unit Dimension ⁄ 16" (910)* 90 = Width 2'-11 13 ⁄ 16" (910)* 54 = 2'-7 5 ⁄ 8" (803)* 90 = 2'-11 1 ⁄ 2" (902)* 90 = 2'-11 13 represent 3 3 ⁄ 8" (10) 5 ⁄ 8 " (10) methods or materials. Refer to 60 = 2'-11 5 ⁄ 8" (905)* 60 = 2'-11 ⁄ 8" (905)* Unit Dimension Width product installation guides at 3 ⁄ 8" (10) 3 ⁄ 8" (10)Minimum Rough Opening Width andersenwindows.com. Unit Dimension Width 3 ⁄ 8" (10) • Dimensions in parentheses Minimum Rough Opening Width are in millimeters. Minimum Rough Opening Width Horizontal Section *Dimension indicates location of Three-Panel astragal centerline.
5 5 ⁄ 16"
160
5 5 ⁄ 16"
Active
Astragal
Passive
Clear Opg. Width 90° Clear Opening Width Full Open Position
Clear Opening Details
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Head
Door at 90° Clear Opening Position
Head
1 ⁄ 2" (13) Active 1 11 ⁄ 16" (43)
Astragal
Passive
Clear Opg. Width 90° Sill ClearSection Opening Width Vertical Full Open Position Andersen® Oak or Maple Threshold
ct
Stationary
Active
Astragal Astragal Clear Opg. Width 90°
r
Passive Clear Opening Width 90°
Clear Opening Width Full Open Position
ersen Support Sill
Active
Clear Opening Width Full Open Position
Horizontal Section Two-Panel, Stationary and Active (open)
Active
Astragal
Passive
Clear Opg. Width 90° Clear Opening Width Full Open Position Active
Clear Opening Height
Horizontal Section Two-Panel, Active (open) and Passive (closed)
Astragal
Passive
Clear Opg. Width 90° Clear Opening Width Full Open Position
Head Door at Full Clear Opening Position
400 Series ® Frenchwood Hinged Patio Doors – Inswing
Unit Dimension Height
Rough Opening Height
amb
Clear Opening Height
Door at Full Clear Opening Position
Door at 90° Clear Opening Position
1 ⁄ 2" (13) 1 11 ⁄ 16" (43)
Sill
Door at Full Clear Opening Position
6) h
Active
Door at 90° Clear Opening Position Astragal
Passive
Clear Opg. Width 90° Clear Opening Width Full Open Position
Stationary
Astragal
Clear Opening Width 90°
Active
Horizontal Section Two-Panel, Active (open) and Passive (open)
Clear Opening Width
• Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. Full Open Position • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
Stationary
Astragal
Clear Opening Width 90° Clear Opening Width Full Open Position
Active 161
FRENCHWOOD HINGED PATIO DOORS — INSWING ®
Ramped Sill Detail
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Cannot be used with hinged or gliding insect screen. 8
1 ⁄ 2" (13)
1
1 7 ⁄ 16" (37) 1 ⁄ 4"
(6)
Vertical Section
Vertical Joining Detail
Vertical Joining Detail – LVL
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 3 ⁄ 4" (19) 1" (25) Width Overall Door Dimension
2" (51)
Overall Door Dimension Width
2" (51)
Sum of individual door widths plus
3 ⁄ 16 "
1" (25)
3 ⁄ 4"
(19)
1" (25)
1" (25)
1" (25)
Sum of individual door widths
(5) for each join.
plus 3 ⁄ 4" (19) for each join.
Overall Rough Opening Width
Overall Rough Opening Width
Overall door dimension width
Overall door dimension width
plus 3 ⁄ 4" (19).
Andersen® Filler and Vinyl Trim
3 ⁄ 16"
Dim. Width Unit Dim.Unit Width
Unit Dim. Width Unit Dim. Width 3 ⁄ 16"
(5)
(5)
3 ⁄ 4"
Unit Dim. WidthUnit Dim. Width 3 ⁄ 4"
(19)
Unit Dim. Width Unit Dim. Width (19)
Horizontal Section Frenchwood® Hinged Inswing to Frenchwood Hinged Inswing
Horizontal Section Frenchwood® Hinged Inswing to Frenchwood Hinged Inswing
Andersen does not recommend joining of hinge jamb to hinge jamb. For more joining information see the combination designs section starting on page 255.
Separate Rough Openings Detail 3 ⁄ 4" (19) Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 1" (25)
1" (25)
1" (25)
2" (51)
1" (25)
To meet structural requirements or to achieve a wider joined appearance, doors may be installed into separate rough openings having vertical support (by others) in combination with Andersen exterior filler and exterior vinyl trim. ®
Unit Dim. Width 3 ⁄ 4"
Unit Dim. Width (19)
Andersen® Filler and Vinyl Trim
Vertical Support by Others
Unit Dim. Width
Unit Dim. Width 2" (51)
Andersen Exterior Extension Jamb
Horizontal Section Frenchwood® Hinged Inswing and Frenchwood Hinged Inswing
• Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on page 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Andersen recommends installation of doors into separate rough openings. Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. • Dimensions in parentheses are in millimeters.
162
Anders Filler a Vinyl Tr
plus 3 ⁄ 4" (19). Unit Dim. Width
Width
2" (51)
Un 2" (51)
FRENCHWOOD HINGED PATIO DOORS – OUTSWING ®
CUSTOM SIZING in 1⁄8" (3) increments
Table of Sizes ............................. 166 Specifications ............................ 168 Custom Sized Doors ................... 167 Grille Patterns ............................ 167 Door Details ........................ 168-169 Joining Details............................ 170 Door Sidelights & Transoms ....... 171 Combination Designs ................. 255 Performance Data ...................... 269 Warranty .............................290-291
163
Dimensions in parentheses are in millimeters.
400 Series ® Frenchwood Hinged Patio Doors – Outswing
SECTION REFERENCE
FRENCHWOOD HINGED PATIO DOORS — OUTSWING ®
C
FEATURES
B
Frame A The sill has a thermal break to keep
Glass H Panels are silicone bed glazed
I H
heat and cold out. The panels and frame have superior strength and insulating properties and a low-maintenance coating.
and finished with an interior wood stop. G
options include:
B All basic exterior frame members are fiberglass reinforced composite, which maintains an attractive appearance while minimizing maintenance.
E
• Low-E4® tempered glass® • Low-E4® HeatLock™ tempered glass • Low-E4® Sun tempered glass • Low-E4® SmartSun™ tempered glass • Low-E4® SmartSun™ HeatLock™ tempered glass
D
C The frame exterior members are attached to a water-repellent preservativetreated wood subframe for long-lasting* protection and performance. The subframe is grooved to accept extension jambs.
Panel D The exterior of the wood door panel
A
F
EXTERIOR
Mortise-and-Tenon Joints
Mortise-and-tenon joints prevent panel sag and maintain smooth operation. Removable Panels
G The ball bearing hinges are covered with a corrosion-resistant powder-coat finish. Hinges are color-matched to the panel exterior and can be adjusted up/down and left/right after installation.
INTERIOR
White
Sandtone
Pine
White
Terratone
Forest Green
Maple
Oak
Naturally occurring variations in grain, color and texture of wood make each door one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
F A factory-applied, one-piece compression-type rubber weatherstrip continues in one plane around the panel to provide maximum effectiveness against water and air infiltration. The corners of the weatherstrip are welded to eliminate gaps between the panel and the frame/sill shoulder.
Patterned glass options are available. See page 10 for more details.
Prefinished White interiors are only available on units with White exteriors.
E Panel interior surfaces are unfinished
Hinged outswing operating panels are available either left- or right-hand active or two-panel active/passive jamb hinged.
Patterned Glass
Additional glass options are available. Contact your Andersen supplier.
is protected with a long-lasting* urethane base finish in White, Sandtone, Terratone or Forest Green color. pine veneer. Unfinished oak and maple veneers are available as options. Lowmaintenance prefinished White interiors are also available.
I High-performance glass
A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite.
HARDWARE FINISHES
Removable panels simplify finishing and allow for easy storage during construction. Release tabs are covered with a cap for a clean appearance. The panels can be easily removed with the unique panel release tab on the hinge. This release feature is ideal for transporting large units up stairs or to other hard-to-reach areas.
HINGED PATIO DOOR HARDWARE OPTIONS
Antique Brass
Black
Bright Brass
Gold Dust
Oil Rubbed Polished Bronze Chrome
Brushed Chrome
Distressed Distressed Bronze Nickel
Satin Nickel
Stone
White
Distressed bronze and oil rubbed bronze are "living" finishes that will change with time and use.
**
Bold name denotes finish shown.
YUMA®
ENCINO ®
ANVERS ®
NEWBURY ®
COVINGTON ™
WHITMORE ®
ALBANY
TRIBECA®
Distressed Bronze Distressed Nickel
Distressed Bronze Distressed Nickel
Bright Brass Oil Rubbed Bronze Satin Nickel
Antique Brass Bright Brass Brushed Chrome Oil Rubbed Bronze Polished Chrome Satin Nickel
Antique Brass Bright Brass Oil Rubbed Bronze
Antique Brass Bright Brass Oil Rubbed Bronze Satin Nickel
Black Gold Dust Stone White
Stone White
* Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 400 Series Limited Warranty. ** Hardware sold separately. Dimensions in parentheses are in millimeters.
Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
164
Tribeca and Albany hardware are zinc diecast with powder-coated durable finish. Other hardware is solid forged brass. Mix-and-match interior and exterior style and finish options are available. Bright brass and satin nickel finishes feature a 10-year limited warranty.
ACCESSORIES Sold Separately Hardware
Frame
Multi-Point Locking System
Extension Jambs
Grilles
Construction Lock
Grilles are available in a variety of configurations and widths. For patio door grille patterns see page 167.
Standard jamb depth is 4 9/16" (116). Pine, oak or maple veneer or prefinished White interior extension jambs are available in 1⁄16" (1.5) increments between 5 1⁄16" (129) and 7 1⁄8" (181).
Sidelights & Transoms
Sill Step This hardware can be used on all Andersen hinged doors to help secure the jobsite during the construction phase of the project. It features an undersized escutcheon plate, which makes on-site finishing easier.
The multi-point locking system, with a hook bolt above and below the center dead bolt, provides a weathertight seal and enhanced security. The Frenchwood® outswing door offers an optional oak or maple sill step.
Insect Screens Retractable Insect Screen
Sill Support
Sidelights and transoms are available for all Frenchwood hinged patio doors. See pages 171-174 for details.
Exterior Trim This product is available with Andersen® Exterior Trim. See pages 215-220 for details.
Hardware Exterior Keyed Lock A six-pin key cylinder lock is available in styles and finishes that coordinate with hardware. This lock allows the hinged patio door to be locked and unlocked from the exterior.
For more information about glass, patterned glass, art glass and grilles see pages 10-17. For more information about combination designs, product performance, installation accessories and warranty see pages 255-291 or visit
andersenwindows.com
The retractable insect screen is installed on the interior of the door and opens across the width of the opening. When the insect screen is not in use, it neatly retracts into small canisters mounted on each side of the door. Retractable insect screens are made of a long-lasting* fiberglass screen mesh with a charcoal finish. They are available for single-panel and two-panel doors with oak, maple, pine and prefinished White finishes. Please note, retractable insect screen track reduces clear opening height by 1" (25).
Glass
Handle Extension
Andersen ® Art Glass
Extends interior door handle an additional 1" (25) from the door panel to accommodate interior blinds or shades. Kit includes one handle extender and spindle. A second extender may be added to the spindle to increase the length an additional 1" (25) to a 2" (51) total extension. Extenders are available in finishes that coordinate with hardware.
Andersen art glass panels come in a variety of original patterns, including four Frank Lloyd Wright ® Series designs. See pages 213-214 for details on Andersen art glass. Visit andersenwindows.com/artglass for details and pattern information.
400 Series ® Frenchwood Hinged Patio Doors – Outswing
An aluminum sill support is designed to lock into a channel under the sill and tie back into the wall. This will offer support to the outermost sill section when needed. Available in neutral gray finish.
CAUTION: • Painting and staining may cause damage to rigid vinyl. • 400 Series products in Terratone color may be painted any color lighter than Terratone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Terratone any color darker than Terratone. • Do not paint 400 Series products with White, Sandtone or Forest Green exterior colors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
* Visit andersenwindows.com/warranty or contact your Andersen supplier for details on the 400 Series Limited Warranty. NOTE: Andersen® patio doors are not intended for use as entrance doors. Dimensions in parentheses are in millimeters. “Frank Lloyd Wright” is a registered trademark of the Frank Lloyd Wright Foundation.
165
FRENCHWOOD HINGED PATIO DOORS — OUTSWING ®
FWO x x 68
FWO x x 611
79 1 ⁄ 2" (2019)
8'-0" (2438)
7'-11 1 ⁄ 2" (2426)
66 3 ⁄ 8" (1686)
6'-11" (2108)
6'-10 3 ⁄ 8" (2092)
63 1 ⁄ 2" (1613)
6'-8" (2032)
6'-7 1 ⁄ 2" (2019)
Unobstructed Glass
Minimum Rough Opening
Door Dimension
Three Patio Door Heights
FWO x x 80
Table of Frenchwood® Hinged Outswing Patio Door Sizes Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Door Dimension
2'-0 1 ⁄ 2" (620)
4'-0" (1219)
4'-0" (1219)
2'-6 1 ⁄ 8" (765)
2'-6 1 ⁄ 8" (765)
2'-6 1 ⁄ 8" (765)
4'-11 1 ⁄4" (1504)
4'-11 1 ⁄4" (1504)
Minimum Rough Opening
2'-1" (634)
4'-1" (1242)
4'-1" (1242)
2'-7" (787)
2'-7" (787)
2'-7" (787)
5'-0" (1524)
5'-0" (1524)
Unobstructed Glass
13 1 ⁄4" (336)
13 1 ⁄4" (336)
13 1 ⁄4" (336)
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
(single panel only)
3 heights
FWO2168S FWO4168APLR FWO4168PALR FWO21611S FWO41611APLR FWO41611PALR FWO2180S FWO4180APLR FWO4180PALR
FWO2768S FWO2768AR FWO2768AL FWO5068APLR FWO5068PALR FWO27611S FWO27611AR FWO27611AL FWO50611APLR FWO50611PALR FWO2780S FWO2780AR FWO2780AL FWO5080APLR FWO5080PALR
Door Dimension
2'-8 1 ⁄ 8" (816)
2'-8 1 ⁄ 8" (816)
2'-8 1 ⁄ 8" (816)
5'-3 1 ⁄4" (1607)
5'-3 1 ⁄4" (1607)
Minimum Rough Opening
2'-9" (838)
2'-9" (838)
2'-9" (838)
5'-4" (1626)
5'-4" (1626)
Unobstructed Glass
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
(single panel only)
Custom-size doors are available in 1 ⁄ 8" (3) increments. See page 167 for custom sizes and specifications
3 heights
FWO2968S FWO2968AR FWO2968AL FWO29611S FWO29611AR FWO29611AL FWO2980S FWO2980AR FWO2980AL
FWO5468APLR FWO5468PALR FWO54611APLR FWO54611PALR FWO5480APLR FWO5480PALR
Door Dimension
3'-0 1 ⁄ 8" (918)
3'-0 1 ⁄ 8" (918)
3'-0 1 ⁄ 8" (918)
5'-11 1 ⁄4" (1810)
5'-11 1 ⁄4" (1810)
Minimum Rough Opening
3'-1" (940)
3'-1" (940)
3'-1" (940)
6'-0" (1829)
6'-0" (1829)
Unobstructed Glass
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
(single panel only)
Stationary (S) doors can be used as an individual unit or as a sidelight. Grille patterns shown on page 167.
3 heights
FWO3168S FWO3168AR FWO3168AL FWO31611S FWO31611AR FWO31611AL FWO3180S FWO3180AR FWO3180AL
FWO6068APLR FWO60611APLR FWO6080APLR
FWO6068PALR FWO60611PALR FWO6080PALR
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
166
Identification
Order Designation Description
Viewed from the exterior.
Viewed from the exterior.
Stationary
Active Panel
Right Hinged
Left Hinged
(non-operating panel)
(operating panel used most often)
(hinges on right)
(hinges on left)
Passive Panel (operating panel with attached astragal)
FWO
6068 A
P
L
R
Frenchwood® Left Active Panel (panel used Hinged Outswing Hinged most often) Patio Door Passive Door Rough Right Panel Opening Hinged
CUSTOM WIDTHS
CUSTOM WIDTHS
Clear Opening
Height =
height - 2.945" (74)
CUSTOM HEIGHTS
48" to 71 1 ⁄4" (1219) (1810)
78" to 95 1 ⁄ 2" (1981) (2426)
24 1 ⁄ 2" to 38 1 ⁄ 8" (622) (968)
CUSTOM HEIGHTS
78" to 95 1 ⁄ 2" (1981) (2426)
Custom Sizes and Specification Formulas
and maximum widths and heights shown. Some restrictions apply. Measurement guide can be found at andersenwindows.com/measure.
Minimum R.O.
Width
= width + 3/4" (19) height + 1/2" (13)
Unobstr. Glass
Height =
Single-Panel Width
Available in 1 ⁄ 8" (3) increments between minimum
Width
= width − 11.25" (286) height − 15.71" (399)
Height =
= width - 5.056" (128)
Two-Panel
Two-Panel, two panels open Width
Single-Panel
Width
= width - 6.722" (170)
= width − 21.5" (546) height − 15.71" (399)
Height =
Two-Panel, one panel open Width
= (width - 9.250" (234)) ÷ 2
• Dimensions in parentheses are in millimeters. • Clear Opening formulas provide dimensions for determining area available for egress. Vent opening, or area available for passage of air, is equal to clear opening. Minimum R.O. (minimum rough opening) formulas provide minimum rough opening width and height dimensions. Unobstr. Glass (unobstructed glass) formulas provide dimensions for determining area available for passage of light. • Clear opening width formulas are based on panel(s) in a 90° open position.
Grille Patterns Prairie A
Colonial
Modified Colonial
Modified Colonial SCR (Simulated Check Rail)
Tall Fractional
Tall Fractional SCR (Simulated Check Rail)
Short Fractional
Short Fractional SCR (Simulated Check Rail)
400 Series ® Frenchwood Hinged Patio Doors – Outswing
Frenchwood® Hinged Outswing Patio Doors
Number of lights and overall pattern varies with panel size. Patterns are not available in all configurations. Specified equal light and custom patterns are also available. For more information on divided light see page 11 or visit andersenwindows.com/grilles. Specified Equal Light Examples
Custom Pattern Examples
167
FRENCHWOOD HINGED PATIO DOORS — OUTSWING ®
Frenchwood® Hinged Outswing Patio Door Opening and Area Specifications Clear Opening Maximums Clear Opening Area Sq. Ft./(m2)
90° Width Inches/(mm)
Full Width Inches/(mm)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Area Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
FWO2168
-
FWO2768
1
13.34
(1.24)
25 1/8"
(637)
26 11/16"
(678)
76 1/2"
(1943)
FWO2968
1
14.40
(1.34)
27 1/8"
(688)
28 11/16"
(729)
76 1/2"
(1943)
9.20
(0.86)
14.40
(1.34)
17.72
(1.65)
FWO3168
1
16.53
(1.54)
31 1/8"
(790)
32 11/16"
(830)
76 1/2"
(1943)
10.96
(1.02)
16.53
(1.54)
19.93
(1.85)
FWO4168
2
21.98
(2.04)
41 7/16"
(1053)
44 5/8"
(1133)
76 1/2"
(1943)
11.67
(1.08)
21.98
(2.04)
26.48
(2.46)
FWO4168
1
10.29
(0.95)
19 3/8"
(492)
20 7/8"
(530)
76 1/2"
(1943)
11.67
(1.08)
10.29
(0.95)
26.48
(2.46)
FWO5068
2
27.95
(2.60)
52 5/8"
(1337)
55 13/16"
(1418)
76 1/2"
(1943)
16.64
(1.55)
27.95
(2.60)
32.68
(3.04)
FWO5068
1
13.28
(1.23)
25"
(635)
26 1/2"
(673)
76 1/2"
(1943)
16.64
(1.55)
13.28
(1.23)
32.68
(3.04)
FWO5468
2
30.08
(2.80)
56 5/8"
(1438)
59 13/16"
(1519)
76 1/2"
(1943)
18.39
(1.71)
30.08
(2.80)
34.89
(3.24)
FWO5468
1
14.34
(1.33)
27"
(685)
28 1/2"
(723)
76 1/2"
(1943)
18.39
(1.71)
14.34
(1.33)
34.89
(3.24)
FWO6068
2
34.33
(3.19)
64 5/8"
(1641)
67 13/16"
(1723)
76 1/2"
(1943)
21.92
(2.04)
34.33
(3.19)
39.30
(3.65)
FWO6068
1
16.46
(1.52)
31"
(787)
32 1/2"
(826)
76 1/2"
(1943)
21.92
(2.04)
16.46
(1.52)
39.30
(3.65)
FWO21611
-
6.13
(0.57)
FWO27611
1
13.48
(1.29)
25 1/8"
(637)
26 11/16"
(678)
79 3/8"
(2016)
8.69
(0.81)
13.48
FWO29611
1
14.94
(1.39)
27 1/8"
(688)
28 11/16"
(729)
79 3/8"
(2016)
9.61
(0.89)
14.94
FWO31611
1
17.15
(1.59)
1
31 /8"
(790)
11
32 /16"
FWO41611
2
22.80
(2.12)
41 7/16"
(1053)
44 5/8"
FWO41611
1
10.67
(0.99)
19 3/8"
(492)
20 7/8"
FWO50611
2
29.00
(2.69)
52 5/8"
(1337)
55 13/16"
FWO50611
1
13.78
(1.28)
25"
(635)
26 1/2"
FWO54611
2
31.21
(2.90)
56 5/8"
(1438)
FWO54611
1
14.88
(1.37)
27"
FWO60611
2
35.62
(3.31)
FWO60611
1
17.08
(1.58)
FWO2180
-
FWO2780
1
16.13
FWO2980
1
17.42
FWO3180
1
FWO4180
-
-
-
-
-
-
5.86
(0.54)
8.32
(0.77)
13.34
(1.24)
14.00
Jamb (1.30)
(1.29)
17.22
(1.60)
(1.39)
18.36
3 ⁄ 8" (1.71)
-
(830)
79 /8"
(2016)
11.45
(1.06)
17.15
(1.59)
20.65
(10) (1.92)
(1133)
79 3/8"
(2016)
12.20
(1.13)
22.80
(2.12)
27.44
(2.55)
(530)
79 3/8"
(2016)
12.20
(1.13)
10.67
(0.99)
27.44
(2.55)
(1418)
79 3/8"
(2016)
17.38
(1.62)
29.00
(2.69)
33.87
(3.15)
(673)
79 3/8"
(2016)
17.38
(1.62)
13.78
(1.28)
33.87
(3.15)
59 13/16"
(1519)
79 3/8"
(2016)
19.22
(1.79)
31.21
(2.90)
36.15
(3.36)
(685)
28 1/2"
(723)
79 3/8"
(2016)
19.22
(1.79)
14.88
(1.38)
36.15
(3.36)
64 5/8"
(1641)
67 13/16"
(1723)
79 3/8"
(2016)
22.91
(2.13)
35.62
(3.31)
40.73
(3.78)
31"
(787)
32 1/2"
(826)
79 3/8" 3
Opening Width 17.08 (2016) Clear 22.91 (2.13)
(1.58)
40.73
(3.78)
16.24
(1.51)
-
(1.50)
25 /8"
(1.62)
27 1/8"
19.99
(1.86)
2
26.57
FWO4180
1
FWO5080
2
FWO5080
-
1 ⁄ 4" (44)
Full7.33 Open Position (0.68)
-
-
(2350)
Clear Width 90° 10.41 Opg.(0.97) 16.13
(1.50)
19.96
(1.85)
(2350)
11.52
(1.07)
17.42
(1.62)
21.29
(1.98)
92 1/2"
(2350)
13.72
(1.28)
19.99
(1.86)
23.94
(2.22)
92 1/2"
(2350)
14.62
(1.36)
26.57
(2.47)
31.81
(2.96)
(530)
92 1/2"
(2350)
14.62
(1.36)
12.44
(1.15)
31.81
(2.96)
(1418)
92 1/2"
(2350)
20.82
(1.93)
33.80
(3.14)
39.27
(3.65)
(673)
92 1/2"
(2350)
20.82
(1.93)
16.05
(1.49)
39.27
(3.65)
(1519)
92 1/2"
(2350)
23.03
(2.14)
36.37
(3.38)
41.92
(3.89)
(723)
92 1/2"
(2350)
23.03
(1723)
92 1/2"
(2350)
27.44
92 1/2"
(2350)
27.44
(637)
11
26 /16"
(688)
28 11/16"
31 1/8"
(790)
(2.47)
41 7/16"
(1053)
12.44
(1.15)
19 3/8"
(492)
20 7/8"
33.80
(3.14)
52 5/8"
(1337)
55 13/16"
1
16.05
(1.49)
25"
(635)
26 1/2"
FWO5480
2
36.37
(3.38)
56 5/8"
(1438)
59 13/16"
FWO5480
1
17.34
(1.61)
27"
(685)
28 1/2"
FWO6080
2
41.51
(3.86)
64 5/8"
(1641)
67 13/16"
FWO6080
1
19.91
(1.85)
31"
(787)
32 1/2"
(826)
(678)
1
92 /2"
(729)
92 1/2"
32 11/16"
(830)
44 5/8"
(1133)
Door at Full Clear
Active
Astragal
Door at 90°17.34 Clear (2.14) Opening Position
(1.61)
41.92
(3.89)
(2.55)
41.51
(3.86)
47.22
(4.39)
(2.55)
19.91
(1.85)
47.22
(4.39)
• Dimensions in parentheses are in millimeters or square meters. Opening Position *For two-panel doors with only one panel open, clear opening is based on the active panel open and the passive panel closed.
168
3 ⁄ 8" (10)
1 3 ⁄ 4" (44)
Passive
Door at Full Clear Opening Position
Jamb 3 ⁄ 38" ⁄ 8" (10) (10)
Handle Hardware
Andersen Retractable Insect Screen
• 6 9/16" (167) jamb depth measurement is from backside of installation flange. • Light-colored areas are parts included with door. Dark-colored Active areas areAstragal additional Andersen® parts required to complete door Door at 90° Clear assembly as shown. Opening Position • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners Door at Full Clear Jamb or other items. See installation Opening Position Passive Active Panel information on Panel pages 288-289. • Details are for illustration Unit Dimension WidthUnit Dimension Width 3 ⁄ 8" 3 ⁄ 8" only and are not intended to (10) represent product installation (10) Minimum Rough Opening WidthRough Opening Width Minimum methods or materials. Refer to product installation guides at andersenwindows.com. Horizontal Section • Dimensions in parentheses are in Andersen Retractable Handle Active Andersen millimeters.
Minimum Rough Opening Height
6 9 ⁄ 16" (167) Jamb Depth Unit Dimension Width Minimum Rough Opening Width
1 5 ⁄ 16" (33)
1 5 ⁄ 16" (33)
6 9 ⁄ 16" (167) Jamb Depth
Andersen Extension Jamb
Jamb
Minimum Rough Opening Width
Clear Opg. Width 90°
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Jamb
Unit Dimension Width
Clear Opening Width Full Open Position
1 3 ⁄ 4" (44)
Frenchwood® Hinged Outswing Patio Door Details
Horizontal Section Stationary
(1.26) (1.54)
3
1
3 ⁄ 8" (10)
13.51 16.62
6 9 ⁄ 16" (167) Jamb Depth
-
1 5 ⁄ 16" (33)
-
Extension Jamb
Hardware
Unit Dimension Height
Number of Panels in Open Position*
Door Number
P
Head
Insect Screen
Andersen Sill Support
Sill
Door at 90° Clear Opening Position
Door at Full Clear Opening Position
Door at Full Clear Opening Position
Frenchwood® Hinged Outswing Patio Door Details
3 ⁄ 8"
Jamb Unit Dimension Width
3 ⁄ 8" (10)
Head
Passive Panel
Active Panel Unit Dimension Width
3 ⁄ 8"
(10)
3 ⁄ 8" (10)
Minimum Rough Opening Width
Clear Opening Height
6 9 ⁄ 16" (167) Jamb Depth
Jamb
1 5 ⁄ 16" (33)
Jamb
Andersen Retractable Insect Screen
Handle Hardware
Unit Dimension Height
Andersen Extension Jamb
Andersen® Retractable Insect Screen
Minimum Rough Opening Height
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
(10)
3 ⁄ 8" (10)
Minimum Rough Opening Width
Andersen Sill Support Sill
Horizontal Section Two-Panel
Vertical Section
Clear Opening Details
1 3 ⁄ 4" (44)
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 Clear Opening Width Full Open Position
1 1 ⁄ 4" (32)
Clear Opening Height
Clear Opening Height Passive
Active
1 1 ⁄ 4" (32)
Head
1 3 ⁄ 4" (44)
Head
Jamb
Jamb
Jamb
1 3 ⁄ 4" (44)
Door at Full Clear Door at Full Clear Opening Position Opening Position Jamb
Door at 90° Clear Door at 90° Clear Opening Position Opening Position Sill
Door at 90° Clear Opening Position
Sill Horizontal Section Active (open)
Vertical Section
Clear Opening Width Full Open Position Clear Opening Width 90°
1 3 ⁄ 4" (44)
1 3 ⁄ 4" (44)
Clear Opening Width Full Open Position
1 3 ⁄ 4" (44)
Clear Opg. Width 90°
Passive
Active
Astragal
Passive
Door at 90° Clear Opening Position Door at Full Clear Opening Position
Door at 90° Clear Opening Position
Door at Full Cle Opening Positio
Door at Full Clear Opening Position Horizontal Section Two-Panel, Active (open) and Passive (closed)
Horizontal Section Two-Panel, Active (open) and Passive (open)
• 6 9/16" (167) jamb depth measurement is from backside of installation flange. • Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. ® • Rough openings may need to be increasedAndersen to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. Retractable • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. Andersen Retractable Andersen Handle Insect • Dimensions in parentheses are in millimeters.
Screen
Extension Jamb
Hardware
Insect Screen
169 ight
Clear Opening Height
Active
400 Series ® Frenchwood Hinged Patio Doors – Outswing
Andersen® Retractable Insect Screen
e
ight
1 3 ⁄ 4" (44)
Clear Opening Width 90°
Clear Opening Width Clear Opening Width 3 Full Open Position Full Open Position 1 ⁄ 4" (44) 1 3 ⁄ 4" (44) Clear Opening Width 90° Clear Opening Width 90°
FRENCHWOOD HINGED PATIO DOORS — OUTSWING ®
Separate Rough Openings Detail
Vertical Joining Detail
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
2" (51)
2 3 ⁄ 4" (70)
Overall Door Dimension Width
To meet structural requirements or to achieve a wider joined
Sum of individual door widths
appearance, windows may be installed into separate rough openings ®
plus 3 ⁄ 16" (5) for each join.
Filler and® having vertical support (by others) in combination with Andersen
Overall Rough Opening Width
exterior filler and exterior vinyl trim.
Andersen
Vinyl Trim
Overall door dimension width 2" (51)
plus 3 ⁄ 4" (19).
2 3 ⁄ 4" (70) Unit Dim. Width
Unit Dim. Width 3 ⁄ 16"
Vertical Joining Detail – LVL
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 2" (51) Overall Door Dimension Width
Unit Dim. Width
Unit Dim. Width
Sum of individual door widths 3
Unit Dim. Width
Unit Dim. Width 3 ⁄ 4"
(5)
(19)
Andersen® Filler and Vinyl Trim
Horizontal Section Frenchwood® Hinged Outswing to Frenchwood Hinged Outswing
Vertical Support by Others
2 3 ⁄ 4" (70) Unit Dim. Width
Unit Dim. Width
⁄ 16" (5)
3 ⁄ 4"
plus 3 ⁄ 4" (19) for each join.
Vertical Support by Others
(19)
Overall Rough Opening Width
Unit Dim. Width
Unit Dim. Width 2" (51)
Andersen® Filler and Vinyl Trim
Horizontal Section Frenchwood® Hinged Outswing and Frenchwood Hinged Outswing
Overall door width plus 3 ⁄ 4" (19). Unit Dim. Width 3 ⁄ 16"
Unit Dim. Width (5)
Unit Dim. Width
Unit Dim. Width 3 ⁄ 4"
(19)
Unit Dim. Width
Unit Dim. Width 2" (51)
Horizontal Section Frenchwood® Hinged Outswing to Frenchwood Hinged Outswing
Andersen does not recommend joining of hinge jamb to hinge jamb. For more joining information see the combination designs section starting on page 255.
• Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Andersen recommends installation of doors into separate rough openings. Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. • Dimensions in parentheses are in millimeters.
170
Unit Dim. Width
FRENCHWOOD PATIO DOOR SIDELIGHTS & TRANSOMS ®
CUSTOM SIZING in 1⁄8" (3) increments
SECTION REFERENCE Table of Sizes ............................. 173 Specifications ............................ 173
Sidelight & Transom Details .........174 Combination Designs ................. 255 Performance Data ...................... 269 Warranty .............................290-291 Dimensions in parentheses are in millimeters.
400 Series ® Frenchwood Patio Door Sidelights & Transoms
Custom Sized Sidelights & Transoms ................................174
FRENCHWOOD PATIO DOOR SIDELIGHTS & TRANSOMS ®
FEATURES
ACCESSORIES Sold Separately
A
Frame A All basic exterior frame members
Frame
G
Extension Jambs
B
are fiberglass reinforced composite, which maintains an attractive appearance while minimizing maintenance.
Standard jamb depth is 4 9/16" (116). Pine, oak or maple veneer or prefinished White interior extension jambs are available in 1⁄16" (1.5) increments between 5 1⁄16" (129) and 7 1⁄8" (181).
F
B The frame members are attached to a water-repellent preservative-treated wood subframe for long-lasting* protection and performance. The subframe is grooved to accept extension jambs.
D
Glass
G C
A
C The exterior of the wood door panel is protected with a long-lasting* urethane base finish in White, Sandtone, Terratone or Forest Green color. pine veneer. Unfinished oak and maple veneers are available as options. Lowmaintenance prefinished White interiors are also available.
Andersen art glass panels come in a variety of original patterns, including four Frank Lloyd Wright ® Series designs. See pages 213-214 for details on Andersen art glass. Visit andersenwindows.com/artglass for details and pattern information.
C
B
D Panel interior surfaces are unfinished
E
F
Sidelight
D
Grilles Grilles are available in a variety of configurations and widths.
E The sill of the Frenchwood® patio door sidelight is made with three-piece construction. The subsill is made of Fibrex® material, and the sill step is solid oak. The exterior sill member is made of extruded aluminum with an attractive wear-resistant, heat-baked finish in a neutral color. This combination of materials combines durability and low maintenance with excellent insulating characteristics.
Transom
EXTERIOR
Exterior Trim This product is available with Andersen® Exterior Trim. See pages 215-220 for details.
INTERIOR Prefinished White interiors are only available on units with White exteriors.
White
Sandtone
Pine
White
Terratone
Forest Green
Maple
Oak
Glass F Panels are silicone bed glazed and finished with an interior wood stop.
G High-performance glass options include:
Andersen ® Art Glass
Naturally occurring variations in grain, color and texture of wood make each product one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
• Low-E4® tempered glass® • Low-E4® HeatLock™ tempered glass • Low-E4® Sun tempered glass • Low-E4® SmartSun™ tempered glass • Low-E4® SmartSun™ HeatLock™ tempered glass
CAUTION: • Painting and staining may cause damage to rigid vinyl. • 400 Series products in Terratone color may be painted any color lighter than Terratone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Terratone any color darker than Terratone. • Do not paint 400 Series products with White, Sandtone or Forest Green exterior colors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
Additional glass options are available. Contact your Andersen supplier. A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite. Patterned Glass Patterned glass options are available. See page 10 for more details.
FWT6016 FWG60611
FWH3168 FWSL1768 FWSL1768
Frenchwood® patio door sidelights, transoms and sidelight transoms elegantly frame our 400 Series Frenchwood patio doors. LVL reinforced joining materials are available in 4 9/16" (116) and 6 9/16" (167) depths. See pages 266-267.
FWT-2-54110 FWH5468
FWSLT1716 FWT3116 FWSL1780 FWO3180
* Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 400 Series Limited Warranty. Dimensions in parentheses are in millimeters. “Frank Lloyd Wright” is a registered trademark of the Frank Lloyd Wright Foundation. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
172
For more information about glass, patterned glass, art glass and grilles see pages 10-17. For more information about combination designs, product performance, installation accessories and warranty see pages 255-291 or visit
andersenwindows.com
Table of Frenchwood® Patio Door Transom, Sidelight Transom and Sidelight Sizes Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Transom/Sidelight Dimension Minimum Rough Opening Unobstructed Glass
1'-1 1 ⁄ 2" (343)
4 3 ⁄ 8" (111)
1'-10 1 ⁄ 2" 1'-10 1 ⁄ 2" 1'-6 1 ⁄ 2" 1'-6 1 ⁄ 2" 1'-1 1 ⁄ 2" (572) (572) (343) (470) (470)
4 3 ⁄ 8" (111)
6'-8" (2032)
63 7 ⁄ 16" (1611)
1'-6 13 ⁄ 16" (478)
2'-0 1 ⁄ 2" (622)
2'-6 1 ⁄ 8" (765)
2'-8 1 ⁄ 8" (816)
3'-0 1 ⁄ 8" (918)
4'-0" (1219)
4'-11 1 ⁄4" (1505)
5'-3 1 ⁄4" (1607)
5'-11 1 ⁄4" (1810)
1'-3 1 ⁄ 2" (394)
1'-7 1 ⁄ 2" (495)
2'-1" (635)
2'-7" (787)
2'-9" (838)
3'-1" (940)
4'-1" (1245)
5'-0" (1524)
5'-4" (1626)
6'-0" (1829)
6 3 ⁄ 8" (162)
10 3 ⁄ 8" (264)
13 5 ⁄ 16" (338)
18 15 ⁄ 16" (481)
20 15 ⁄ 16" (532)
24 15 ⁄ 16" (633)
36 13 ⁄ 16" (935)
48 1 ⁄ 16" (1221)
52 1 ⁄ 16" (1322)
60 1 ⁄ 16" (1526)
13 5 ⁄ 16" (338)
18 15 ⁄ 16" (481)
20 15 ⁄ 16" (532)
24 15 ⁄ 16" (633)
FWT4111
FWT5011
FWT5411
FWT6011
FWT-2-4111
FWT-2-5011
FWT-2-5411
FWT-2-6011
FWT4116
FWT5016
FWT5416
FWT6016
FWT-2-4116
FWT-2-5016
FWT-2-5416
FWT-2-6016
FWT41110
FWT50110
FWT54110
FWT60110
FWT-2-41110
FWT-2-50110
FWT-2-54110
FWT-2-60110
FWSLT1311 FWSLT1711
FWSLT1316 FWSLT1716
FWT2111
FWT2116
FWT2711
FWT2911
FWT2716
FWT2916
FWT3111
FWT3116
FWSLT13110 FWSLT17110 FWT21110
FWT27110
FWT29110
FWT31110
13 3 ⁄ 8" (340)
13 3 ⁄ 8" (340)
9 3 ⁄ 8" (238)
9 3 ⁄ 8" (238)
1-9 13 ⁄ 16" 1-9 13 ⁄ 16" 1'-5 13 ⁄ 16" 1'-5 13 ⁄ 16" 1'-0 13 ⁄ 16" 1'-0 13 ⁄ 16" (452) (452) (325) (554) (554) (325) 6'-7 1 ⁄ 2" (2019)
(single sash only)
1'-2 13 ⁄ 16" (376)
Custom-size doors are available in 1 ⁄ 8" (3) increments. See page 174 for custom sizes and specifications
Frenchwood® Patio Door Sidelight Transom Area Specifications
79 7 ⁄ 16" (2018)
8'-0" (2438)
7'-11 1 ⁄ 2" (2426)
FWSL13611 FWSL17611
FWSL1380
Transom Number
Glass Area Sq. Ft./(m2)
(0.12)
FWT4111
1.13
(0.11)
4.27
(0.40)
(0.17)
FWT4116
2.41
(0.22)
5.94
(0.55)
2.24
(0.21)
FWT41110
3.43
(0.32)
7.27
(0.68)
(0.03)
1.67
(0.16)
FWT5011
1.47
(0.14)
5.27
(0.49)
0.68
(0.06)
2.33
(0.22)
FWT5016
3.14
(0.29)
7.33
(0.68)
0.97
(0.09)
2.85
(0.27)
FWT50110
4.48
(0.42)
8.98
(0.83)
FWT5411
1.59
(0.15)
5.63
(0.52)
FWT5416
3.40
(0.32)
7.82
(0.73)
FWT54110
4.85
(0.45)
9.58
(0.89)
FWT6011
1.84
(0.17)
6.34
(0.59)
FWT6016
3.93
(0.37)
8.81
(0.82)
FWT60110
5.60
(0.52)
10.79
(1.00)
FWT-2 4111
0.82
(0.08)
4.27
(0.40)
Sidelight Transom Number
Glass Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2)
FWSLT1311
0.20
(0.02)
1.32
FWSLT1316
0.42
(0.04)
1.83
FWSLT13110
0.60
(0.06)
FWSLT1711
0.32
FWSLT1716 FWSLT17110
FWSL1780
• "Transom/Sidelight Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
Frenchwood® Patio Door Sidelight Area Specifications Overall Window Area Sq. Ft./(m2)
Frenchwood® Patio Door Transom Area Specifications
Frenchwood Patio Door Transom Area Specifications ®
Overall Window Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2)
Transom Number
Glass Area Sq. Ft./(m2)
FWT2111
0.41
(0.04)
2.18
(0.20)
FWT-2 4116
1.74
(0.16)
5.94
(0.55)
FWT2116
0.87
(0.08)
3.03
(0.28)
FWT-2 41110
2.49
(0.23)
7.27
(0.68)
FWT21110
1.24
(0.12)
3.71
(0.35)
FWT-2 5011
1.16
(0.11)
5.27
(0.49)
FWT2711
0.58
(0.05)
2.68
(0.25)
FWT-2 5016
2.48
(0.23)
7.33
(0.68)
FWT2716
1.24
(0.12)
3.73
(0.35)
FWT-2 50110
3.53
(0.33)
8.98
(0.83)
FWT27110
1.77
(0.16)
4.56
(0.42)
FWT-2 5411
1.28
(0.12)
5.63
(0.52)
Sidelight Number
Glass Area Sq. Ft./(m2)
FWSL1368
2.82
(0.26)
8.18
(0.76)
FWT2911
0.64
(0.06)
2.86
(0.27)
FWT-2 5416
2.74
(0.26)
7.82
(0.73)
FWSL1768
4.58
(0.43)
10.39
(0.97)
FWT2916
1.37
(0.13)
3.97
(0.37)
FWT-2 54110
3.91
(0.36)
9.58
(0.89)
FWSL13611
2.95
(0.27)
8.47
(0.79)
FWT29110
1.95
(0.18)
4.87
(0.45)
FWT-2 6011
1.53
(0.14)
6.34
(0.59)
FWSL17611
4.79
(0.45)
10.76
(1.00)
FWT3111
0.76
(0.07)
3.21
(0.30)
FWT-2 6016
3.26
(0.30)
8.81
(0.82)
FWSL1380
3.53
(0.33)
9.82
(0.91)
FWT3116
1.63
(0.15)
4.47
(0.42)
FWT-2 60110
4.65
(0.43)
10.79
(1.00)
FWSL1780
5.74
(0.53)
12.48
(0.16)
FWT31110
2.33
(0.22)
5.47
(0.51)
• Dimensions in parentheses are in square meters.
173
400 Series ® Frenchwood Patio Door Sidelights & Transoms
FWSL1768
66 5 ⁄ 16" (1684)
6'-11" (2108)
6'-10 3 ⁄ 8" (2092)
FWSL1368
FRENCHWOOD PATIO DOOR SIDELIGHTS & TRANSOMS ®
Custom Sizes and Specification Formulas
Frenchwood® Patio Door Transom and Sidelight Details Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
3 ⁄ 4"
(19)
1" (25)
1" (25)
Available in 1 ⁄ 8" (3) increments between minimum and maximum widths and heights. Some restrictions apply. Measurement guide can be found at andersenwindows.com/measure.
1 13 ⁄ 2" 3to⁄4" 71 24 1 14 to 18⁄4" ⁄ 16" (478) (622)(375) (1810)
Unit Dimension Width
Unit Dimension Width Overall Unit Dimension Width
Minimum Rough Opening Width
Minimum R.O.
Transoms, Twin Transoms & Sidelight Transoms
= width + 3/4" (19) Height = height + 3/4" (19) Width
Sidelights Width
3 ⁄ 8" (10)
Unit Dimension Height Overall Unit Dimension Height
CUSTOM WIDTHS CUSTOM HEIGHTS
CUSTOM WIDTHS CUSTOM WIDTHS 12 3 ⁄4" to 21 13 ⁄ 16" (324) (554)
48" to 71 1 ⁄4" (1219) (1810)
CUSTOM HEIGHTS
1 78" HEIGHTS to 95 ⁄ 2" CUSTOM (1981) (2426)
12 3 ⁄4" to 21 13 ⁄ 16" (324) (554)
"
Twin Transoms
⁄4" 13 ⁄ 16" 24 1 ⁄ 214 " to3 ⁄4"71to118 (622)(375)(1810)(478)
Minimum Rough Opening Height
Sidelights
CUSTOM WIDTHS Horizontal Section Frenchwood® Patio Door Sidelight to Frenchwood® Hinged Inswing Patio Door CUSTOM HEIGHTS
1" (25)
CUSTOM HEIGHTS
(19)
78" to 95 1 ⁄ 2" CUSTOM (1981) HEIGHTS (2426)
3 ⁄ 4"
1" (25)
Rough Opening Width 48" to 71 1 ⁄4Minimum " (1219) (1810)
CUSTOM WIDTHS CUSTOM WIDTHS 12 3 ⁄4" to 21 13 ⁄ 16" (324) (554)
CUSTOM HEIGHTS
12 3 ⁄4" to 21 13 ⁄ 16" (324) (554)
CUSTOM WIDTHS
Unit Dimension Width Overall Unit Dimension Width
Head
1" (25) 3 ⁄ 4" (19) 1" (25)
Unit Dimension Height
Transoms
14 3 ⁄4" to 18 13 ⁄ 16" (375) (478)
12 3 ⁄4" to 21 13 ⁄ 16" (324) (554)
Sidelight Transoms
Unit Dimension Width
3 ⁄ 8" (10)
Head
= width + 3/4" (19) height + 1/2" (13)
Height =
Unobstr. Glass
Andersen® Oak or Maple Threshold
Transoms Width
= window width − 11.15" (283) window height − 8.4" (213)
Height =
Twin Transoms
= window width − 21.30" (541) Height = window height − 8.4" (213) Width
Sidelight Transoms Width
= window width − 8.4" (213) window height − 8.4" (213)
3 ⁄ 4"
Andersen Sill Support
(19)
Sill Vertical Section Frenchwood® Patio Door Transom over Frenchwood Patio Door Sidelight
Height =
Sidelights
= window width − 8.4" (213) Height = window height − 16.06" (408)
For more joining information see the combination designs section starting on page 255.
Width
• Dimensions in parentheses are in millimeters. • Minimum R.O. (minimum rough opening) formulas provide minimum rough opening width and height dimensions. Unobstr. Glass (unobstructed glass) formulas provide dimensions for determining area available for passage of light.
174
• Light-colored areas are parts included with window and/or doors. Dark-colored areas are additional Andersen® parts required to complete window and/or door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
3 ⁄ 8" (10)
CUSTOM SIZING in 1⁄8" (3) increments
SECTION REFERENCE Springline™ Patio Doors Door Dimensions & Specifications ......................... 177 Door Details ..................... 178-179
Arch Patio Doors Door & Sidelight Dimensions & Specifications .................. 180-181 Sidelight Details & Joining Details......................... 182 Door Details ..................... 183-184 Performance Data ...................... 269 Warranty .............................290-291 Dimensions in parentheses are in millimeters.
400 Series Complementary Curved Top Patio Doors
COMPLEMENTARY CURVED TOP PATIO DOORS
COMPLEMENTARY CURVED TOP PATIO DOORS FEATURES
ACCESSORIES Sold Separately
Frame A Heavy-duty extruded aluminum
A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite.
B
cladding protects the frame exterior, providing low-maintenance durability. Standard cladding finish meets AAMA 2604. An optional finish that meets the AAMA 2605 standard is also available.
A
H
Installation flange extends 1 1 ⁄ 2" (38) around three sides of the unit to help properly position the unit in the opening. Installation clips are standard for increased structural anchoring to building members. Mounted around the frame perimeter, the clips rotate into position and can be bent into place against the framing members to suit all jamb conditions.
Multi-Point Locking System/Expanded Offering The complementary hinged patio door has a multi-point locking system with a hook bolt above and below the center deadbolt. This system provides a weathertight seal and enhanced security. Mix-and-match style and finish options are available to get just the right look inside and out. For hardware style and finish options, see pages 14-15.
G E
Inswing F
D
C
B Wood frame members are treated with a water-repellent wood preservative for long-lasting* protection and performance. Radii are made of laminated continuous veneers. Lineal components are engineered wood with a pine core.
C Extruded aluminum sill is thermally
Outswing
Panel E Heavy-duty extruded aluminum cladding protects the panel exterior, providing low-maintenance durability.
broken and available in painted bronze or gray finish. Innovative sill design provides superior water management. Standard outswing sills have an oak cap. Maple or mahogany** is optional. Inswing sills have an interior wood trim strip to match the interior finish.
F Panel interior surfaces are unfinished
D One-piece compression
Glass H High-performance glass
weatherstripping at the frame sides and head protects against air and water infiltration. Flexible thermoplastic sweep is featured at the bottom of the panel on inswing units. Outswing doors also feature a polypropylene rain skirt at the panel sides and top for added protection.
Hardware
wood veneers. Available species are pine, oak and maple.
G Silicone glazing bead combined with two-sided silicone tape provides superior weathertightness.
options include: • Low-E4® tempered glass® • Low-E4® HeatLock™ tempered glass • Low-E4® Sun tempered glass • Low-E4® SmartSun™ tempered glass • Low-E4® SmartSun™ HeatLock™ tempered glass
Extension Jambs Inswing and outswing standard jamb depth is 4 9⁄16" (116). Inswing is also available in a 6 9⁄16" (167) jamb depth. Interior extension jambs are available in 1⁄16" (1.5) increments between 4 9⁄16" (116) and 7 1⁄8" (181). Additional dimensions are available. Contact your Andersen supplier for more information. Interior extension jambs on inswing units will restrict the full opening of the door. Casings
Hinges Ball-bearing hinges are standard on outswing patio doors and are available in finishes that coordinate with hardware trim sets. Adjustable hinges are standard on inswing patio doors and have ball-bearing pivots for smooth, frictionless movement. Features easy horizontal and vertical adjustment, plus quick-release feature for easy panel removal. This release feature is ideal for transporting large units up stairs or to other hard-to-reach areas.
Curved interior casings are available in the same profiles as other Andersen® products. Curved exterior aluminum and wood casings are available in matching radii and a variety of profiles.
Hardware Exterior Keyed Lock
Gold dust finish is standard on wood interior doors. For units with a prefinished White interior, white finish hinges are standard. Also available in finishes that coordinate with hardware. Operation Inswing and outswing units are available. Choose left-hinged, right-hinged or stationary as viewed from the exterior.
Additional glass options are available. Contact your Andersen supplier.
A six-pin key cylinder lock is available for all patio doors in styles and finishes that coordinate with hardware. This lock allows the door to be locked and unlocked from the exterior. Hardware Options† See pages 14-15 for hardware styles and finish options.
INTERIOR
EXTERIOR
Frame
Grilles Grilles are available in a variety of configurations and widths.
White
Canvas
Sandtone
Terratone
Forest Green
Dark Bronze
Pine
Maple
Oak
White
Naturally occurring variations in grain, color and texture of wood make each door one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
Dove Gray
Prairie Grass
Red Rock
Cocoa Bean
Black
* Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 400 Series Limited Warranty. ** Actual wood is Sapele, a non-endangered species of mahogany, grown in Africa, with color and characteristics similar to American mahoganies. † Hardware sold separately. Dimensions in parentheses are in millimeters. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
176
Art Glass Decorative insulated art glass designs are available.
400 Series Complementary Curved Top Patio Doors
Custom-size doors are available in 1 ⁄ 8" (3) increments. Traditional panels are standard. Custom designed and 3 ⁄ 4-light panels are also available. Stationary doors
AHISDxx80AP/PA
AHISDxx80
are also available (i.e. 3180S or 4080SS). Add AHISD to "Door Number" listed in table (i.e. AHISD2168).
Complementary Springline™ Inswing Patio Door Dimensions and Specifications Door Number
Door Dimensions Number of Shoulder Panels Radius Height Width Open* Inches/(mm) Inches/(mm) Inches/(mm)
Min. Rough Opening
Clear Opening Height Width Height Area Inches/(mm) Inches/(mm) Inches/(mm) Sq. Ft./(m2)
Clear Opening Maximums 90° Width Inches/(mm)
Full Width Inches/(mm)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Overall Door Area Area 2 Sq. Ft./(m ) Sq. Ft./(m2)
3180
1
18"
(457) 77 1/2" (1969) 35 15/16" (913) 95 1/2" (2426) 37" (940) 96" (2438) 17.26 (1.60)
30 7/8"
(784) 32 13/16" (833) 75 3/4" (1924) 13.28 (1.23) 20.27 (1.88) 22.88 (2.13)
3380
1
19"
(483) 76 1/2" (1943) 37 15/16" (964) 95 1/2" (2426) 39" (991) 96" (2438) 18.07 (1.68)
32 7/8"
(835) 34 13/16" (884) 74 3/4" (1899) 14.31 (1.33) 21.45 (1.99) 24.09 (2.24)
4080
1
23 /8" (600) 71 /8" (1826) 47 /4" (1200) 95 /2" (2426) 48" (1219) 96" (2438) 10.17 (0.94) 18 /16" (481)
4080
2
23 5/8" (600) 71 7/8" (1826) 47 1/4" (1200) 95 1/2" (2426) 48" (1219) 96" (2438) 21.34 (1.98) 39 15/16" (1014) 43 13/16" (1113) 70 1/8" (1781) 13.27 (1.23) 26.72 (2.48) 29.67 (2.76)
5080
1
5080
2
29 5/8" (752) 65 7/8" (1673) 59 1/4" (1505) 95 1/2" (2426) 60" (1524) 96" (2438) 11.97 (1.11) 24 15/16" (633) 26 7/8" (683) 64 1/8" (1629) 19.14 (1.78) 14.53 (1.35) 36.68 (3.41) AHIADxx611AP/PA AHIADxx80AP/PA AHIADxx68AP/PA AHIADxx611 AHIADxx80 29 5/8" (752) 65 7/8" (1673) 59 1/4" (1505) 95 1/2" (2426) 60" (1524) 96" (2438) 24.85 (2.31) 51 15/16" (1319) 55 13/16" (1418) 64 1/8" (1629) 19.14 (1.78) 33.54 (3.12) 36.68 (3.41)
5480
1
31 5/8" (803) 63 7/8" (1622) 63 1/4" (1607) 95 1/2" (2426) 64" (1626) 96" (2438) 12.46 (1.16) 26 15/16" (684)
31 /8" (803) 63 /8" (1622) 63 /4" (1607) 95 /2" (2426) 64" (1626) 96" (2438) 25.80 (2.40) 55 /16" (1421) 59 /16" (1519) 62 1/8" (1578) 21.05 (1.96) 35.77 (3.32) 38.97 (3.62)
AHIADxx68
5
7
1
1
15
20 7/8"
28 7/8"
(530) 70 1/8" (1781) 13.27 (1.23) 11.72 (1.09) 29.67 (2.76)
(733) 62 1/8" (1578) 21.05 (1.96) 15.45 (1.44) 38.97 (3.62)
5480
2
6080
1
35 5/8" (905) 59 7/8" (1521) 71 1/4" (1810) 95 1/2" (2426) 72" (1829) 96" (2438) 13.27 (1.23) 30 15/16" (786)
6080
2
35 5/8" (905) 59 7/8" (1521) 71 1/4" (1810) 95 1/2" (2426) 72" (1829) 96" (2438) 27.37 (2.54) 63 15/16" (1624) 67 13/16" (1722) 58 1/8" (1476) 24.79 (2.30) 40.15 (3.73) 43.47 (4.04)
5
7
1
1
15
13
32 7/8"
(835) 58 1/8" (1476) 24.79 (2.30) 17.24 (1.60) 43.47 (4.04)
6480
1
37 5/8" (956) 57 7/8" (1470) 75 1/4" (1911) 95 1/2" (2426) 76" (1930) 96" (2438) 13.59 (1.26) 32 15/16" (837)
6480
2
37 5/8" (956) 57 7/8" (1470) 75 1/4" (1911) 95 1/2" (2426) 76" (1930) 96" (2438) 27.99 (2.60) 67 15/16" (1726) 71 13/16" (1824) 56 1/8" (1426) 26.63 (2.47) 42.30 (3.93) 45.69 (4.24)
34 7/8"
(886) 56 1/8" (1426) 26.63 (2.47) 19.84 (1.84) 45.69 (4.24)
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters or square meters. *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed.
Custom-size doors are available in 1 ⁄ 8" (3) increments. Traditional panels are standard. Custom designed and 3 ⁄ 4-light panels are also available. Stationary doors are also available (i.e. 3180S or 4080SS). Add AOSD to "Door Number" listed in table (i.e. AOSD2168).
AOSDxx80AP/PA
AOSDxx80
Complementary Springline™ Outswing Patio Door Dimensions and Specifications Door Number
Door Dimensions Number of Shoulder Panels Radius Height Width Open* Inches/(mm) Inches/(mm) Inches/(mm)
Min. Rough Opening
Clear Opening Height Width Height Area Inches/(mm) Inches/(mm) Inches/(mm) Sq. Ft./(m2)
Clear Opening Maximums 90 Width Inches/(mm) °
Full Width Inches/(mm)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Overall Door Area Area Sq. Ft./(m2) Sq. Ft./(m2)
3180
1
18"
(457) 77 1/2" (1969) 35 15/16" (913) 95 1/2" (2426) 37" (940) 96" (2438) 17.52 (1.63)
31 3/8"
(797) 33 5/16" (846) 75 3/4" (1924) 13.28 (1.23) 20.53 (1.91) 22.88 (2.13)
3380
1
19"
(483) 76 1/2" (1943) 37 15/16" (964) 95 1/2" (2426) 39" (991) 96" (2438) 18.33 (1.70)
33 3/8"
(848) 35 5/16" (897) 74 3/4" (1899) 14.31 (1.33) 21.71 (2.02) 24.09 (2.24)
4080
1
23 5/8" (600) 71 7/8" (1826) 47 1/4" (1200) 95 1/2" (2426) 48" (1219) 96" (2438) 10.35 (0.96)
19 1/4"
(489)
4080
2
23 5/8" (600) 71 7/8" (1826) 47 1/4" (1200) 95 1/2" (2426) 48" (1219) 96" (2438) 21.73 (2.02) 40 11/16" (1033) 44 5/8" (1133) 70 1/8" (1781) 13.27 (1.23) 27.12 (2.52) 29.67 (2.76)
5080
1
29 5/8" (752) 65 7/8" (1673) 59 1/4" (1505) 95 1/2" (2426) 60" (1524) 96" (2438) 12.13 (1.13)
25 1/4"
(641)
21 1/4"
27 1/4"
(540) 70 1/8" (1781) 13.27 (1.23) 11.72 (1.09) 29.67 (2.76)
(692) 64 1/8" (1629) 19.14 (1.78) 14.53 (1.35) 36.68 (3.41)
5080 AOADxx68 2
1
11
29AOADxx611 /8" (752) 65 /8"AOADxx80 (1673) 59 /4" (1505) 95 /2" (2426) 96" (2438) 52 /16"/PA (1338) 56 /8" (1438) 64 1/8" (1629) 19.14 (1.78) 33.90 (3.15) 36.68 (3.41) /PA 60" (1524) /PA25.22 (2.34) AOADxx611AP AOADxx80AP AOADxx68AP
5480
1
31 5/8" (803) 63 7/8" (1622) 63 1/4" (1607) 95 1/2" (2426) 64" (1626) 96" (2438) 12.62 (1.17)
27 1/4"
5480
2
31 5/8" (803) 63 7/8" (1622) 63 1/4" (1607) 95 1/2" (2426) 64" (1626) 96" (2438) 26.16 (2.43) 56 11/16" (1440) 60 5/8" (1540) 62 1/8" (1578) 21.05 (1.96) 36.12 (3.36) 38.97 (3.62)
6080
1
35 5/8" (905) 59 7/8" (1521) 71 1/4" (1810) 95 1/2" (2426) 72" (1829) 96" (2438) 13.42 (1.25)
6080
2
35 5/8" (905) 59 7/8" (1521) 71 1/4" (1810) 95 1/2" (2426) 72" (1829) 96" (2438) 27.70 (2.57) 64 11/16" (1643) 68 5/8" (1743) 58 1/8" (1476) 24.79 (2.30) 40.48 (3.76) 43.47 (4.04)
6480
1
37 5/8" (956) 57 7/8" (1470) 75 1/4" (1911) 95 1/2" (2426) 76" (1930) 96" (2438) 13.74 (1.28)
6480
2
37 5/8" (956) 57 7/8" (1470) 75 1/4" (1911) 95 1/2" (2426) 76" (1930) 96" (2438) 28.31 (2.63) 68 11/16" (1745) 72 5/8" (1845) 56 1/8" (1426) 26.63 (2.47) 42.62 (3.96) 45.69 (4.24)
5
7
1
31 1/4"
33 1/4"
5
(692)
(794)
(845)
29 1/4"
33 1/4"
35 1/4"
(743) 62 1/8" (1578) 21.05 (1.96) 15.45 (1.44) 38.97 (3.62)
(845) 58 1/8" (1476) 24.79 (2.30) 17.24 (1.60) 43.47 (4.04)
(895) 56 1/8" (1426) 26.63 (2.47) 19.84 (1.84) 45.69 (4.24)
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters or square meters. *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed.
177
(43)
4 9 ⁄ 16" (116) Jamb Depth
COMPLEMENTARY CURVED TOP PATIO DOORS 6 9 ⁄ 16" (167) Complementary Springline Patio Door Details — 4 9 ⁄ 16" (116) Jamb Depth 1 5 ⁄ 16" ™ Inswing
5 1 ⁄ 2" (140) 3 ⁄ 8" (10)
Horizontal Section
10 7 ⁄ 16" (265)
Dimension from top of sill to subfloor will vary based on thickness of sill flashing. Dimension from 1top11of⁄ 16sill " to subfloor (43) will vary based on 10 7 ⁄ 16" (265)thickness of sill Unobstr. flashing. Glass
Unit Dimension Width
1 11 ⁄ 16" (43)
3 ⁄ 8"
10 7 ⁄ 16" (265) Horizontal Section Two-Panel Width Unit Dimension
Unobstr. Glass
(140)
(10)
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
1 11 ⁄ 16" (43)
5 1 ⁄ 2" (140)
3 ⁄ 8" (10)
Rough Opening Width 5 1 ⁄ 2"
Unobstr. Glass
5 1 ⁄ 2" (140)
10 7 ⁄ 16" (265)
5 1 ⁄ 2" (140)
3 ⁄ 8" (10)
Rough Opening Width Unobstr. Glass
Unobstr. Glass
10 7 ⁄ 16" Unit Dimension Height (265)
Unit Dimension Height1 5 ⁄ 16" Rough Opening Height (33)
Rough Opening Height 4 9 ⁄ 16" (116) Jamb Depth 3 ⁄ 8" (10)
1 5 ⁄ 16" (33)
" 1 5"⁄ 16 4 9 ⁄ 16 (116) Jamb(33) Depth
Rough Opening Width 5 1 ⁄ 2" Unobstr. Glass (140) Unit Dimension Width
Unobstr. Glass
5 1 ⁄ 2" (140)
5 1 ⁄ 2" (140)
Unit Dimension Width
3 ⁄ 8" (10)
3 ⁄ 8" (10)
6 9 ⁄ 16" (167) Jamb Unobstr. Depth Glass
Unit Dimension Height
1 5 ⁄ 16" 1 (33) 5 ⁄ 2" (140)
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33)
Rough Opening Height
" 4 9 ⁄1165"⁄ 16 (116) Jamb(33) Depth 5 1 ⁄ 2" (140)
Scale 11 ⁄ 2" (38) = 1'-0" (33) (305) — 1:8Jamb Depth
Unobstr. Glass
5 1 ⁄ 2" (140)
Vertical Section 3 ⁄ 8"
(10)
Rough Opening Width
Complementary Springline™ Inswing Patio Door Details — 6 9 ⁄ 16" (167) Jamb Depth
6 9 ⁄ 16" (167) Jamb Depth
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33) Unobstr. Glass
5 1 ⁄ 2" (140)
Unit Dimension Width
3 ⁄ 8"
(10) 1 5 ⁄ 16" (33)
1 ⁄ 2" 5 Rough Opening Unobstr. Width Glass (140)
Unit Dimension Width
3 ⁄ 8" (10)
(140)
6 9 ⁄ 16" (167) Jamb Depth Unobstr. Glass
5 1 ⁄ 2" (140)
Unit Dimension Width
3 ⁄ 8" (10)
3 ⁄ 8"
5 1 ⁄ 2" (140)
5 1 ⁄ 2"
3 ⁄ 8" (10)
Rough Opening Width
(10) 5 1 ⁄ 2" (140)
5 1 ⁄ 2" (140)
1 5 ⁄ 16" (33)
1 5 ⁄ 16" (33)
6 9 ⁄ 16" (167) Jamb Depth
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
3 ⁄ 8" (10)
5 1 ⁄ 2" (140)
1 5 ⁄ 16" (33)
3 ⁄ 8" (10)
Unobstr. Glass
5 1 ⁄ 2" 3 ⁄ 8"
(10)
(140)
10 7 ⁄ 16" (265) Unit Dimension Width Rough Opening Width Unobstr. 10 7 ⁄ 16" (265) Glass UnitSection Dimension Width Horizontal Two-Panel
Rough Opening Width
5 1 ⁄ 2" (140)
Unobstr. Glass
Unobstr. Glass
Unobstr. Glass
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
10 7 ⁄ 16" (265)
1 5 ⁄ 16" (33)
6 9 ⁄ 16" (167) Jamb Depth
1 5 ⁄ 16" (33)
6 9 ⁄ 16" (167) Jamb Depth
4 9 ⁄ 16" (116) Jamb Depth
Horizontal Section
Unit Dimension Height
Rough Opening Height
Rough Opening Width
5 1 ⁄ 2" (140)
3 ⁄ 8"
10 7 ⁄ 16" (265)
Unobstr. Glass
Unit Dimension Width
3(10) ⁄ 8" (10)
Rough Opening Width
5 1 ⁄ 2" (140)
3 ⁄ 8" (10)
Vertical Section
9 ⁄ 16"
178
(167) mb Depth
• 4 9/16" (116) and 6 9/16" (167) jamb depth measurements are from backside of installation flange. • Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
Unobstr. 1 11 ⁄ 16" (43) Glass
400 Series Complementary Curved Top Patio Doors
4 9 ⁄ 16" (116) Jamb Depth
Complementary Springline™ Outswing Patio Door Details — 4 9 ⁄ 16" (116) Jamb Depth Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
5 1 ⁄ 2" (140)
Unit Dimension Width
3 ⁄ 8" (10)
5 1 ⁄ 2" (140)
Unit Dimension Width
3 ⁄ 8" (10)
Rough Opening Width
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth 1 5 ⁄ 16" (33) 3 ⁄ 8"
5 1 ⁄ 2" (140)
3 ⁄ 8" (10)
Unobstr. Glass
10 7 ⁄ 16" (265) Unit Dimension Width
1 3 ⁄4" (44)
5 1 ⁄ 2" (140)
Unobstr. Glass
3 ⁄ 8" (10)
Rough Opening Width 5 1 ⁄ 2" (140)
Unobstr. Glass
7 ⁄ 16" (265)Section 10Horizontal
Two-Panel
Unit Dimension Width
Unobstr. Glass
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
Vertical Section
5 1 ⁄ 2" (140)
3 ⁄ 8"
(10)
Rough Opening Width
4 9 ⁄ 16" (116) Jamb Depth
(10)
10 7 ⁄ 16"
4 9 ⁄ 16" (116) Jamb Depth
Horizontal Section
Unobstr. Glass
Unobstr. Glass
(265)
5 1 ⁄ 2" (140)
5 1 ⁄ 2" (140)
Rough Opening Width
Unit Dimension Height
3 ⁄ 8" (10)
1 5 ⁄ 16" (33)
Unobstr. Glass
Rough Opening Height
4 9 ⁄ 16" (116) Jamb Depth 1 5 ⁄ 16" (33)
5 1 ⁄ 2" (140)
3 ⁄ 8" (10)
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33)
1 5 ⁄ 16" (33)
5 1 ⁄ 2" (140)
5 1 ⁄ 2" (140)
Unit Dimension Width
3 ⁄ 8" (10)
Rough Opening Width
3 ⁄ 8"
(10)
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
3 ⁄ 8" (10)
Unobstr. Glass
3 ⁄ 8" (10)
5 1 ⁄ 2" (140)
Unobstr. Glass
10 7 ⁄ 16" (265) Unit Dimension Width
5 1 ⁄ 2" (140)
Unobstr. Glass
Rough Opening Width
• 4 9/16" (116) jamb depth measurements are from backside of installation flange. • Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
179
COMPLEMENTARY CURVED TOP PATIO DOORS AHISDxx80AP/PA
AHISDxx80
Custom-size doors are available in 1 ⁄ 8" (3) increments. Traditional panels are standard. Custom designed and AHIADxx68
AHIADxx611
AHIADxx68AP/PA
AHIADxx80
AHIADxx611AP/PA
3 ⁄ 4-light
AHIADxx80AP/PA
panels are also available. Stationary doors are
also available (i.e. 2168S or 4068SS). Add AHIAD to "Door Number" listed in table (i.e. AHIAD2168).
Complementary Arch Inswing Patio Door Dimensions and Specifications Door Number
Door Dimensions Number of Shoulder Panels Radius Height Width Open* Inches/(mm) Inches/(mm) Inches/(mm)
Min. Rough Opening Clear Opening Maximums Clear Opening Height Width Height Area 90° Width Full Width Height Inches/(mm) Inches/(mm) Inches/(mm) Sq. Ft./(m2) Inches/(mm) Inches/(mm) Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Area Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
2168
1
36" (914) 77 7/16" (1967) 23 15/16" (608) 79 1/2" (2019) 25" (635) 80" (2032) 10.79 (1.00) 18 7/8" (479) 20 13/16" (529) 74 11/16" (1897)
2768
1
48" (1219) 77 1/8" (1959) 29 15/16" (760) 79 1/2" (2019) 31" (787) 80" (2032) 13.84 (1.29) 24 7/8" (632) 26 13/16" (681) 74 5/16" (1888)
8.28 (0.77) 15.70 (1.46) 17.85 (1.66)
2968
1
48" (1219) 76 3/4" (1949) 31 15/16" (811) 79 1/2" (2019) 33" (838) 80" (2032) 14.81 (1.38) 26 7/8" (683) 28 13/16" (732)
9.15 (0.85) 16.77 (1.56) 18.95 (1.76)
3168
1
48" (1219)
3368
1
48" (1219) 75 5/8" (1921) 37 15/16" (964) 79 1/2" (2019) 39" (991) 80" (2032) 17.86 (1.66) 32 7/8" (835) 34 13/16" (884) 73 7/8" (1876) 11.72 (1.09) 22.01 (2.04) 24.36 (2.26)
76"
74"
(1880)
5.66 (0.53) 12.46 (1.16) 14.49 (1.35)
(1930) 35 15/16" (913) 79 1/2" (2019) 37" (940) 80" (2032) 16.71 (1.55) 30 7/8" (784) 32 13/16" (833) 73 5/16" (1862) 10.87 (1.01) 18.88 (1.75) 21.13 (1.96)
21611
1
36" (914) 80 5/16" (2040) 23 15/16" (608) 82 3/8" (2092) 25" (635) 83" (2108) 11.21 (1.04) 18 7/8" (479) 20 13/16" (529) 77 9/16" (1970)
27611
1
48" (1219)
(2032) 29 15/16" (760) 82 3/8" (2092) 31" (787) 83" (2108); 14.37 (1.33) 24 7/8" (632) 26 13/16" (681) 77 3/16" (1961)
8.68 (0.81) 18.17 (1.69) 20.55 (1.91)
29611
1
48" (1219) 79 5/8" (2022) 31 15/16" (811) 82 3/8" (2092) 33" (838) 83" (2108) 15.38 (1.43) 26 7/8" (683) 28 13/16" (732) 76 7/8" (1953)
9.58 (0.89) 19.41 (1.80) 21.83 (2.03)
80"
5.93 (0.55) 14.39 (1.34) 16.65 (1.55)
31611
1
48" (1219) 78 7/8" (2003) 35 15/16" (913) 82 3/8" (2092) 37" (940) 83" (2108) 17.36 (1.61) 30 7/8" (784) 32 13/16" (833) 76 3/16" (1935) 11.39 (1.06) 21.89 (2.03) 24.37 (2.26)
33611
1
48" (1219) 78 1/2" (1994) 37 15/16" (964) 82 3/8" (2092) 39" (991) 83" (2108) 18.55 (1.72) 32 7/8" (835) 34 13/16" (884) 76 3/4" (1949) 12.28 (1.14) 25.19 (2.34) 27.78 (2.58)
2180
1
36" (914) 93 7/16" (2373) 23 15/16" (608) 95 1/2" (2426) 25" (635) 96" (2438) 13.11 (1.22) 18 7/8" (479) 20 13/16" (529) 90 11/16" (2303)
2780
1
48" (1219) 93 1/8" (2365) 29 15/16" (760) 95 1/2" (2426) 31" (787) 96" (2438) 16.82 (1.56) 24 7/8" (632) 26 13/16" (681) 90 5/16" (2294) 10.38 (0.96) 20.63 (1.92) 23.25 (2.16)
2980
1
48" (1219) 92 3/4" (2356) 31 15/16" (811) 95 1/2" (2426) 33" (838) 96" (2438) 18.01 (1.67) 26 7/8" (683) 28 13/16" (732)
3180
1
48" (1219)
92"
90"
7.09 (0.66) 16.31 (1.52) 18.81 (1.75)
(2286) 11.47 (1.07) 22.06 (2.05) 24.71 (2.30)
(2337) 35 15/16" (913) 95 1/2" (2426) 37" (940) 96" (2438) 20.35 (1.89) 30 7/8" (784) 32 13/16" (833) 89 5/16" (2269) 13.63 (1.27) 24.89 (2.31) 27.62 (2.57)
3380
1
48" (1219) 91 5/8" (2327) 37 15/16" (964) 95 1/2" (2426) 39" (991) 96" (2438) 21.73 (2.02) 32 7/8" (835) 34 13/16" (884) 89 7/8" (2283) 14.71 (1.37) 28.38 (2.64) 31.20 (2.90)
4068
2
48" (1219) 73 5/16" (1862) 47 1/4" (1200) 79 1/2" (2019) 48" (1219) 80" (2032) 21.56 (2.00) 39 15/16" (1014) 43 13/16" (1113) 70 7/8" (1800) 10.93 (1.02) 25.61 (2.38) 28.07 (2.61)
4068
1
48" (1219) 73 5/16" (1862) 47 1/4" (1200) 79 1/2" (2019) 48" (1219) 80" (2032) 10.27 (0.95) 18 15/16" (481)
5068
2
96" (2438) 74 13/16" (1900) 59 1/4" (1505) 79 1/2" (2019) 60" (1524) 80" (2032) 27.95 (2.60) 51 15/16" (1319) 55 13/16" (1418) 72 1/8" (1832) 16.30 (1.51) 32.24 (3.00) 34.97 (3.25)
5068
1
96" (2438) 74 13/16" (1900) 59 1/4" (1505) 79 1/2" (2019) 60" (1524) 80" (2032) 13.46 (1.25) 24 15/16" (633)
5468
2
96" (2438) 74 1/8" (1883) 63 1/4" (1607) 79 1/2" (2019) 64" (1626) 80" (2032) 29.70 (2.76) 55 15/16" (1421) 59 13/16" (1519) 71 1/2" (1816) 17.97 (1.67) 34.29 (3.19) 37.09 (3.45)
5468
1
96" (2438) 74 1/8" (1883) 63 1/4" (1607) 79 1/2" (2019) 64" (1626) 80" (2032) 14.34 (1.33) 26 15/16" (684)
6068
2
96" (2438) 72 5/8" (1845) 71 1/4" (1810) 79 1/2" (2019) 72" (1829) 80" (2032) 32.99 (3.06) 63 15/16" (1624) 67 13/16" (1722) 70 1/16" (1780) 21.25 (1.97) 38.33 (3.56) 41.27 (3.83)
6068
1
96" (2438) 72 5/8" (1845) 71 1/4" (1810) 79 1/2" (2019) 72" (1829) 80" (2032) 16.00 (1.49) 30 15/16" (786)
6468
2
96" (2438) 71 13/16" (1824) 75 1/4" (1911) 79 1/2" (2019) 76" (1930) 80" (2032) 34.53 (3.21) 67 15/16" (1726) 71 13/16" (1824) 69 1/4" (1759) 22.86 (2.12) 44.22 (4.11) 47.36 (4.40)
6468
1
96" (2438) 71 13/16" (1824) 75 1/4" (1911) 79 1/2" (2019) 76" (1930) 80" (2032) 16.77 (1.56) 32 15/16" (837)
40611
2
48" (1219) 76 3/16" (1935) 47 1/4" (1200) 82 3/8" (2092) 48" (1219) 83" (2108) 22.44 (2.08) 39 15/16" (1014) 43 13/16" (1113) 73 3/4" (1873) 11.46 (1.06) 29.64 (2.75) 32.34 (3.00)
40611
1
48" (1219) 76 3/16" (1935) 47 1/4" (1200) 82 3/8" (2092) 48" (1219) 83" (2108) 10.69 (0.99) 18 15/16" (481)
50611
2
96" (2438) 77 /16" (1973) 59 /4" (1505) 82 /8" (2092) 60" (1524) 83" (2108) 29.07 (2.70) 51 /16" (1319) 55 /16" (1418)
75"
(1905) 17.09 (1.59) 37.35 (3.47) 40.32 (3.75)
50611
1
96" (2438) 77 11/16" (1973) 59 1/4" (1505) 82 3/8" (2092) 60" (1524) 83" (2108) 14.00 (1.30) 24 15/16" (633)
75"
(1905) 17.09 (1.59) 18.15 (1.69) 40.32 (3.75)
54611
2
96" (2438)
77"
(1956) 63 1/4" (1607) 82 3/8" (2092) 64" (1626) 83" (2108) 30.89 (2.87) 55 15/16" (1421) 59 13/16" (1519) 74 3/8" (1889) 18.84 (1.75) 39.77 (3.69) 42.80 (3.98)
54611
1
96" (2438)
77"
(1956) 63 1/4" (1607) 82 3/8" (2092) 64" (1626) 83" (2108) 14.91 (1.39) 26 15/16" (684)
60611
2
96" (2438) 75 1/2" (1918) 71 1/4" (1810) 82 3/8" (2092) 72" (1829) 83" (2108) 34.35 (3.19) 63 15/16" (1624) 67 13/16" (1722) 72 15/16" (1853) 22.28 (2.07) 44.53 (4.14) 47.71 (4.43)
60611
1
96" (2438) 75 1/2" (1918) 71 1/4" (1810) 82 3/8" (2092) 72" (1829) 83" (2108) 16.65 (1.55) 30 15/16" (786)
64611
2
96" (2438) 74 11/16" (1897) 75 1/4" (1911) 82 3/8" (2092) 76" (1930) 83" (2108) 35.97 (3.34) 67 15/16" (1726) 71 13/16" (1824) 72 1/8" (1832) 23.98 (2.23) 50.78 (4.72) 54.16 (5.03)
64611
1
96" (2438) 74 11/16" (1897) 75 1/4" (1911) 82 3/8" (2092) 76" (1930) 83" (2108) 17.47 (1.62) 32 15/16" (837)
4080
2
48" (1219) 89 5/16" (2269) 47 1/4" (1200) 95 1/2" (2426) 48" (1219) 96" (2438) 26.43 (2.46) 39 15/16" (1014) 43 13/16" (1113) 86 7/8" (2207) 13.76 (1.28) 33.66 (3.13) 36.60 (3.40)
4080
1
48" (1219) 89 5/16" (2269) 47 1/4" (1200) 95 1/2" (2426) 48" (1219) 96" (2438) 12.59 (1.17) 18 15/16" (481)
5080
2
96" (2438) 90 13/16" (2307) 59 1/4" (1505) 95 1/2" (2426) 60" (1524) 96" (2438) 34.16 (3.17) 51 15/16" (1319) 55 13/16" (1418) 88 1/8" (2238) 20.50 (1.90) 42.47 (3.95) 45.67 (4.24)
5080
1
96" (2438) 90 13/16" (2307) 59 1/4" (1505) 95 1/2" (2426) 60" (1524) 96" (2438) 16.45 (1.53) 24 15/16" (633)
5480
2
96" (2438) 90 1/8" (2289) 63 1/4" (1607) 95 1/2" (2426) 64" (1626) 96" (2438) 36.34 (3.38) 55 15/16" (1421) 59 13/16" (1519) 87 1/2" (2223) 22.61 (2.10) 45.24 (4.20) 48.51 (4.51)
5480
1
96" (2438) 90 1/8" (2289) 63 1/4" (1607) 95 1/2" (2426) 64" (1626) 96" (2438) 17.55 (1.63) 26 15/16" (684)
6080
2
96" (2438) 88 /8" (2251) 71 /4" (1810) 95 /2" (2426) 72" (1829) 96" (2438) 40.53 (3.77) 63 /16" (1624) 67 /16" (1722) 86 1/16" (2186) 26.78 (2.49) 50.73 (4.71) 54.14 (5.03)
6080
1
96" (2438) 88 5/8" (2251) 71 1/4" (1810) 95 1/2" (2426) 72" (1829) 96" (2438) 19.65 (1.83) 30 15/16" (786)
6480
2
96" (2438) 87 13/16" (2230) 75 1/4" (1911) 95 1/2" (2426) 76" (1930) 96" (2438) 42.51 (3.95) 67 15/16" (1726) 71 13/16" (1824) 85 1/4" (2165) 28.83 (2.68) 57.33 (5.33) 60.95 (5.66)
6480
1
96" (2438) 87 13/16" (2230) 75 1/4" (1911) 95 1/2" (2426) 76" (1930) 96" (2438) 20.65 (1.92) 32 15/16" (837)
11
5
1
1
3
1
15
15
20 7/8"
26 7/8"
28 7/8"
32 7/8"
34 7/8"
20 7/8"
(530) 70 7/8" (1800) 10.93 (1.02) 12.22 (1.14) 28.07 (2.61)
(683) 72 1/8" (1832) 16.30 (1.51) 15.54 (1.44) 34.97 (3.25)
(733) 71 1/2" (1816) 17.97 (1.67) 16.56 (1.54) 37.09 (3.45)
(835) 70 1/16" (1780) 21.25 (1.97) 18.58 (1.73) 41.27 (3.83)
(886) 69 1/4" (1759) 22.86 (2.12) 21.53 (2.00) 47.36 (4.40)
(530) 73 3/4" (1873) 11.46 (1.06) 14.29 (1.33) 32.34 (3.00)
13
26 7/8"
28 7/8"
32 7/8"
34 7/8"
20 7/8"
26 7/8"
28 7/8"
(683)
(733) 74 3/8" (1889) 18.84 (1.75) 19.35 (1.80) 42.80 (3.98)
(835) 72 15/16" (1853) 22.28 (2.07) 21.74 (2.02) 47.71 (4.43)
(886) 72 1/8" (1832) 23.98 (2.23) 25.22 (2.34) 54.16 (5.03)
(530) 86 7/8" (2207) 13.76 (1.28) 14.29 (1.33) 36.60 (3.40)
(683) 88 1/8" (2238) 20.50 (1.90) 18.15 (1.69) 45.67 (4.24)
(733) 87 1/2" (2223) 22.61 (2.10) 19.35 (1.80) 48.51 (4.51)
13
32 7/8"
34 7/8"
(835) 86 1/16" (2186) 26.78 (2.49) 21.74 (2.02) 54.14 (5.03)
(886) 85 1/4" (2165) 28.83 (2.68) 25.22 (2.34) 60.95 (5.66)
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters or square meters. *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed.
180
Custom-size doors are available in 1 ⁄ 8" (3) increments. Traditional panels are standard. Custom designed and AOADxx68
AOADxx611
AOADxx68AP/PA
AOADxx80
AOADxx611AP/PA
3 ⁄ 4-light
AOADxx80AP/PA
"Door Number" listed in table (i.e. AOAD2168).
Complementary Arch Outswing Patio Door Dimensions and Specifications Door Number
Door Dimensions Number of Shoulder Panels Radius Height Width Open* Inches/(mm) Inches/(mm) Inches/(mm)
panels are also available. Stationary doors are
also available (i.e. 2168S or 4068SS). Add AOAD to
Min. Rough Opening Clear Opening Maximums Clear Opening Height Width Height Area 90° Width Full Width Height Inches/(mm) Inches/(mm) Inches/(mm) Sq. Ft./(m2) Inches/(mm) Inches/(mm) Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Area Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
2168
1
36" (914) 77 7/16" (1967) 23 15/16" (608) 79 1/2" (2019) 25" (635) 80" (2032) 11.06 (1.03) 19 3/8" (492) 21 5/16" (541) 74 3/4" (1899)
5.66 (0.53) 12.46 (1.16) 14.49 (1.35)
2768
1
48" (1219) 77 1/8" (1959) 29 15/16" (760) 79 1/2" (2019) 31" (787) 80" (2032) 14.11 (1.31) 25 3/8" (645) 27 5/16" (694) 74 3/8" (1889)
8.28 (0.77) 15.70 (1.46) 17.85 (1.66)
2968
1
48" (1219) 76 3/4" (1949) 31 15/16" (811) 79 1/2" (2019) 33" (838) 80" (2032) 15.08 (1.40) 27 3/8" (695) 29 5/16" (745) 74 1/16" (1881)
9.15 (0.85) 16.77 (1.56) 18.95 (1.76)
3168
1
48" (1219)
76"
(1930) 35 15/16" (913) 79 1/2" (2019) 37" (940) 80" (2032) 16.97 (1.58) 31 3/8" (797) 33 5/16" (846) 73 3/8" (1864) 10.87 (1.01) 18.88 (1.75) 21.13 (1.96)
3368
1
48" (1219) 75 5/8" (1921) 37 15/16" (964) 79 1/2" (2019) 39" (991) 80" (2032) 17.90 (1.66) 33 3/8" (848) 35 5/16" (897)
21611
1
36" (914) 80 5/16" (2040) 23 15/16" (608) 82 3/8" (2092) 25" (635) 83" (2108) 11.49 (1.07) 19 3/8" (492) 21 5/16" (541) 77 5/8" (1972)
27611
1
48" (1219)
(2032) 29 15/16" (760) 82 3/8" (2092) 31" (787) 83" (2108) 14.65 (1.36) 25 3/8" (645) 27 5/16" (694) 77 1/4" (1962)
8.68 (0.81) 18.17 (1.69) 20.55 (1.91)
29611
1
48" (1219) 79 5/8" (2022) 31 15/16" (811) 82 3/8" (2092) 33" (838) 83" (2108) 15.66 (1.45) 27 3/8" (695) 29 5/16" (745) 76 15/16" (1954)
9.58 (0.89) 19.41 (1.80) 21.83 (2.03)
31611
1
48" (1219) 78 7/8" (2003) 35 15/16" (913) 82 3/8" (2092) 37" (940) 83" (2108) 17.64 (1.64) 31 3/8" (797) 33 5/16" (846) 76 1/4" (1937) 11.39 (1.06) 21.89 (2.03) 24.37 (2.26)
33611
1
48" (1219) 78 1/2" (1994) 37 15/16" (964) 82 3/8" (2092) 39" (991) 83" (2108) 18.61 (1.73) 33 3/8" (848) 35 5/16" (897) 75 7/8" (1927) 12.28 (1.14) 25.19 (2.34) 27.78 (2.58)
2180
1
36" (914) 93 7/16" (2373) 23 15/16" (608) 95 1/2" (2426) 25" (635) 96" (2438) 13.43 (1.25) 19 3/8" (492) 21 5/16" (541) 90 3/4" (2305)
2780
1
48" (1219) 93 1/8" (2365) 29 15/16" (760) 95 1/2" (2426) 31" (787) 96" (2438) 17.14 (1.59) 25 3/8" (645) 27 5/16" (694) 90 3/8" (2296) 10.38 (0.96) 20.63 (1.92) 23.25 (2.16)
2980
1
48" (1219) 92 3/4" (2356) 31 15/16" (811) 95 1/2" (2426) 33" (838) 96" (2438) 18.33 (1.70) 27 3/8" (695) 29 5/16" (745) 90 1/16" (2288) 11.47 (1.07) 22.06 (2.05) 24.71 (2.30)
80"
92"
73"
(1854) 11.72 (1.09) 22.01 (2.04) 24.36 (2.26) 5.93 (0.55) 14.39 (1.34) 16.65 (1.55)
7.09 (0.66) 16.31 (1.52) 18.81 (1.75)
(2337) 35 15/16" (913) 95 1/2" (2426) 37" (940) 96" (2438) 20.68 (1.92) 31 3/8" (797) 33 5/16" (846) 89 3/8" (2270) 13.63 (1.27) 24.89 (2.31) 27.62 (2.57)
3180
1
48" (1219)
3380
1
48" (1219) 91 5/8" (2327) 37 15/16" (964) 95 1/2" (2426) 39" (991) 96" (2438) 21.83 (2.03) 33 3/8" (848) 35 5/16" (897)
4068
2
48" (1219) 73 5/16" (1862) 47 1/4" (1200) 79 1/2" (2019) 48" (1219) 80" (2032) 21.93 (2.04) 40 11/16" (1033) 44 5/8" (1133) 70 3/4" (1797) 10.93 (1.02) 25.61 (2.38) 28.07 (2.61)
4068
1
48" (1219) 73 5/16" (1862) 47 1/4" (1200) 79 1/2" (2019) 48" (1219) 80" (2032) 10.44 (0.97) 19 1/4" (489)
5068
2
96" (2438) 74 13/16" (1900) 59 1/4" (1505) 79 1/2" (2019) 60" (1524) 80" (2032) 28.36 (2.63) 52 11/16" (1338) 56 5/8" (1438) 72 1/8" (1832) 16.30 (1.51) 32.24 (3.00) 34.97 (3.25)
5068
1
96" (2438) 74 13/16" (1900) 59 1/4" (1505) 79 1/2" (2019) 60" (1524) 80" (2032) 13.65 (1.27) 25 1/4" (641)
5468
2
96" (2438) 74 1/8" (1883) 63 1/4" (1607) 79 1/2" (2019) 64" (1626) 80" (2032) 30.08 (2.79) 56 11/16" (1440) 60 5/8" (1540) 71 7/16" (1815) 17.97 (1.67) 34.29 (3.19) 37.09 (3.45)
5468
1
96" (2438) 74 1/8" (1883) 63 1/4" (1607) 79 1/2" (2019) 64" (1626) 80" (2032) 14.51 (1.35) 27 1/4" (692)
6068
2
96" (2438) 72 5/8" (1845) 71 1/4" (1810) 79 1/2" (2019) 72" (1829) 80" (2032) 33.36 (3.10) 64 11/16" (1643) 68 5/8" (1743)
70"
(1778) 21.25 (1.97) 38.33 (3.56) 41.27 (3.83)
6068
1
96" (2438) 72 5/8" (1845) 71 1/4" (1810) 79 1/2" (2019) 72" (1829) 80" (2032) 16.16 (1.50) 31 1/4" (794)
70"
(1778) 21.25 (1.97) 18.58 (1.73) 41.27 (3.83)
6468
2
96" (2438) 71 13/16" (1824) 75 1/4" (1911) 79 1/2" (2019) 76" (1930) 80" (2032) 34.89 (3.24) 68 11/16" (1745) 72 5/8" (1845) 69 3/16" (1757) 22.86 (2.12) 44.22 (4.11) 47.36 (4.40)
6468
1
96" (2438) 71 13/16" (1824) 75 1/4" (1911) 79 1/2" (2019) 76" (1930) 80" (2032) 16.94 (1.57) 33 1/4" (845)
40611
2
48" (1219) 76 3/16" (1935) 47 1/4" (1200) 82 3/8" (2092) 48" (1219) 83" (2108) 22.82 (2.12) 40 11/16" (1033) 44 5/8" (1133) 73 5/8" (1870) 11.46 (1.06) 29.64 (2.75) 32.34 (3.00)
40611
1
48" (1219) 76 3/16" (1935) 47 1/4" (1200) 82 3/8" (2092) 48" (1219) 83" (2108) 10.86 (1.01) 19 1/4" (489)
21 1/4"
27 1/4"
29 1/4"
33 1/4"
35 1/4"
21 1/4"
89"
(2261) 14.71 (1.37) 28.38 (2.64) 31.20 (2.90)
(540) 70 3/4" (1797) 10.93 (1.02) 12.22 (1.14) 28.07 (2.61)
(692) 72 1/8" (1832) 16.30 (1.51) 15.54 (1.44) 34.97 (3.25)
(743) 71 7/16" (1815) 17.97 (1.67) 16.56 (1.54) 37.09 (3.45)
(845)
(895) 69 3/16" (1757) 22.86 (2.12) 21.53 (2.00) 47.36 (4.40)
(540) 73 5/8" (1870) 11.46 (1.06) 14.29 (1.33) 32.34 (3.00)
50611
2
96" (2438) 77 /16" (1973) 59 /4" (1505) 82 /8" (2092) 60" (1524) 83" (2108) 29.49 (2.74) 52 /16" (1338) 56 /8" (1438)
75"
(1905) 17.09 (1.59) 37.35 (3.47) 40.32 (3.75)
50611
1
96" (2438) 77 11/16" (1973) 59 1/4" (1505) 82 3/8" (2092) 60" (1524) 83" (2108) 14.19 (1.32) 25 1/4" (641)
75"
(1905) 17.09 (1.59) 18.15 (1.69) 40.32 (3.75)
54611
2
96" (2438)
77"
(1956) 63 1/4" (1607) 82 3/8" (2092) 64" (1626) 83" (2108) 31.29 (2.91) 56 11/16" (1440) 60 5/8" (1540) 74 5/16" (1888) 18.84 (1.75) 39.77 (3.69) 42.80 (3.98)
54611
1
96" (2438)
77"
(1956) 63 1/4" (1607) 82 3/8" (2092) 64" (1626) 83" (2108) 15.09 (1.40) 27 1/4" (692)
60611
2
96" (2438) 75 1/2" (1918) 71 1/4" (1810) 82 3/8" (2092) 72" (1829) 83" (2108) 34.73 (3.23) 64 11/16" (1643) 68 5/8" (1743) 72 7/8" (1851) 22.28 (2.07) 44.53 (4.14) 47.71 (4.43)
60611
1
96" (2438) 75 1/2" (1918) 71 1/4" (1810) 82 3/8" (2092) 72" (1829) 83" (2108) 16.83 (1.56) 31 1/4" (794)
64611
2
96" (2438) 74 11/16" (1897) 75 1/4" (1911) 82 3/8" (2092) 76" (1930) 83" (2108) 36.34 (3.38) 68 11/16" (1745) 72 5/8" (1845) 72 1/16" (1830) 23.98 (2.23) 50.78 (4.72) 54.16 (5.03)
64611
1
96" (2438) 74 11/16" (1897) 75 1/4" (1911) 82 3/8" (2092) 76" (1930) 83" (2108) 17.64 (1.64) 33 1/4" (845)
4080
2
48" (1219) 89 5/16" (2269) 47 1/4" (1200) 95 1/2" (2426) 48" (1219) 96" (2438) 26.88 (2.50) 40 11/16" (1033) 44 5/8" (1133) 86 3/4" (2203) 13.76 (1.28) 33.66 (3.13) 36.60 (3.40)
4080
1
48" (1219) 89 5/16" (2269) 47 1/4" (1200) 95 1/2" (2426) 48" (1219) 96" (2438) 12.80 (1.19) 19 1/4" (489)
5080
2
96" (2438) 90 13/16" (2307) 59 1/4" (1505) 95 1/2" (2426) 60" (1524) 96" (2438) 34.65 (3.22) 52 11/16" (1338) 56 5/8" (1438) 88 1/8" (2238) 20.50 (1.90) 42.47 (3.95) 45.67 (4.24)
5080
1
96" (2438) 90 13/16" (2307) 59 1/4" (1505) 95 1/2" (2426) 60" (1524) 96" (2438) 16.68 (1.55) 25 1/4" (641)
5480
2
96" (2438) 90 1/8" (2289) 63 1/4" (1607) 95 1/2" (2426) 64" (1626) 96" (2438) 36.81 (3.42) 56 11/16" (1440) 60 5/8" (1540) 87 7/16" (2221) 22.61 (2.10) 45.24 (4.20) 48.51 (4.51)
5480
1
96" (2438) 90 1/8" (2289) 63 1/4" (1607) 95 1/2" (2426) 64" (1626) 96" (2438) 17.76 (1.65) 27 1/4" (692)
11
1
3
11
5
27 1/4"
29 1/4"
33 1/4"
35 1/4"
21 1/4"
27 1/4"
29 1/4"
(692)
(743) 74 5/16" (1888) 18.84 (1.75) 19.35 (1.80) 42.80 (3.98)
(845) 72 7/8" (1851) 22.28 (2.07) 21.74 (2.02) 47.71 (4.43)
(895) 72 1/16" (1830) 23.98 (2.23) 25.22 (2.34) 54.16 (5.03)
(540) 86 3/4" (2203) 13.76 (1.28) 14.29 (1.33) 36.60 (3.40)
(692) 88 1/8" (2238) 20.50 (1.90) 18.15 (1.69) 45.67 (4.24)
(743) 87 7/16" (2221) 22.61 (2.10) 19.35 (1.80) 48.51 (4.51)
6080
2
96" (2438) 88 /8" (2251) 71 /4" (1810) 95 /2" (2426) 72" (1829) 96" (2438) 40.98 (3.81) 64 /16" (1643) 68 /8" (1743)
86"
(2184) 26.78 (2.49) 50.73 (4.71) 54.14 (5.03)
6080
1
96" (2438) 88 5/8" (2251) 71 1/4" (1810) 95 1/2" (2426) 72" (1829) 96" (2438) 19.86 (1.84) 31 1/4" (794)
86"
(2184) 26.78 (2.49) 21.74 (2.02) 54.14 (5.03)
6480
2
96" (2438) 87 13/16" (2230) 75 1/4" (1911) 95 1/2" (2426) 76" (1930) 96" (2438) 42.96 (3.99) 68 11/16" (1745) 72 5/8" (1845) 85 3/16" (2164) 28.83 (2.68) 57.33 (5.33) 60.95 (5.66)
6480
1
96" (2438) 87 13/16" (2230) 75 1/4" (1911) 95 1/2" (2426) 76" (1930) 96" (2438) 20.85 (1.94) 33 1/4" (845)
5
1
1
11
5
33 1/4"
35 1/4"
(845)
(895) 85 3/16" (2164) 28.83 (2.68) 25.22 (2.34) 60.95 (5.66)
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters or square meters. *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed.
181
400 Series Complementary Curved Top Patio Doors
AOSDxx80AP/PA
AOSDxx80
Unobstr. Glass
Rough Opening Height
Complementary Arch Patio Door Sidelights
Unit Dimension Height
5 1 ⁄ 2" (140)
COMPLEMENTARY CURVED TOP PATIO DOORS
1 5 ⁄ 16" Custom sized in 1 ⁄ 8" (3) increments. 10 7 ⁄ 16" (265)
4 9 ⁄ 16" Jamb Width
Standard sizes in two widths and heights. Contact your Andersen supplier for sidelight dimensions and specifications. Sash-set arch patio door sidelights, shown, are standard. Direct-set sidelights are available special order. 11 ⁄ 16" by (17)
ASLAD17xx80
Rough Opening Height
Order Designation Description
17
AHIAD
3168
A
L
17
AHIAD
3168
A
10 1 ⁄ 2"
4 9 ⁄ 16" (116) Jamb Depth
Viewed from the exterior.
R
17
1 5 ⁄ 8" (41)
6 9 ⁄ 16" (167) Jamb Depth
ASLAD17xx68
5 1 ⁄ 2"
ASLAD13xx80
Unit Dimension Height
ASLAD13xx68
AHIAD
6480
A
P
L
R
1 ⁄ 4" 2Unobstructed Glass Dimension from top Right Door Passive Door Flanking unit Door Active Left Active Right Flanking unit Flanking unit Width of sill to subfloor will hinged rough opg. panel rough opg. panel hinged3 15 ⁄ 16" width width rough opg. panel hinged width ⁄ 16" Unobstructed Glass 3 15(143) vary based on thickness 3 ⁄ 8" Dimension Width Hinged (100) (100) ActiveUnit Andersen Hinged Andersen Hinged Andersen Left Width of sill flashing. Unit Dimension Width Inswing Arch Door Inswing Arch Door Inswing Arch Door panel hinged 3 ⁄ 8" 3 ⁄ 8" Rough Opening Width (10) (10) Arch inswing patio doors (AHIAD) shown above, for arch outswing patio doors use AOAD. Outswing patio doors openRough outward to the exterior. Opening Width
1 5 ⁄ 16" (33)
1 5 ⁄ 16" (33)
5 5 ⁄ 8"
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33)
6 9 ⁄ 16" (167) Jamb Depth
(143)
Vertical Joining Details
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 Jamb Width
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
4 9 ⁄ 16"
Complementary Arch Patio Door Sidelight Details
5 5 ⁄ 8"
2 3 ⁄ 8" (60)
2 3 ⁄ 8" (60)
3 1 ⁄ 8" (79)
3 1 ⁄ 8" (79)
1 5 ⁄ 16"
Unit Dimension Width
3 ⁄ 8"
Unobstr. Glass
3 ⁄4" (19)
5 5 ⁄ 8"
3 15 ⁄ 16" (100)
Rough Opening Width
Complementary Arch Inswing Patio Door to Complementary Arch Patio Door Sidelight 4 9 ⁄ 16" (116) Jamb Depth
3 ⁄ 8" 3 ⁄4" (19)
2 3 ⁄ 8" (60)
3 1 ⁄ 8" (79)
11 ⁄ 16" (17)
1 5 ⁄ 8" (41) 3 ⁄4" (19)
Vertical Sections
3 15 ⁄ 16" (100)
Complementary Arch Outswing Patio Door to Complementary Arch Patio Door Sidelight
mb Depth
9 ⁄ 16" (167)
4 9 ⁄ 16" (116) Jamb Depth
• 4 9/16" (116) and 6 9/16" (167) jamb depth measurements are from backside of installation flange. • Light-colored areas are parts included with window and/or door. Dark-colored areas are additional Andersen® parts required to complete window and/or door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
182
Andersen® Exterior Trim (optional)
3 15 ⁄ 16" (100)
Complementary Arch Inswing Patio Door to Complementary Arch Patio Door Sidelight 6 9 ⁄ 16" (167) Jamb Depth
10 7 ⁄ 16" (265)
Unit Dimension Height
Rough Opening Height
5 1 ⁄ 2" (140)
5 5 ⁄ 8"
3 ⁄ 8" (10)
400 Series Complementary Curved Top Patio Doors
4 9 ⁄ 16" (116) Jamb Depth
Complementary Arch Inswing Patio Door Details — 4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33)
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
3 ⁄ 8" (10)
5 1 ⁄ 2" (140)
Unobstr. Glass Unit Dimension Width
5 1 ⁄ 2" (140) 3 ⁄ 8" (10)
Rough Opening Width Horizontal Section
Dimension from top of sill to subfloor will Dimension from based on top ofvary sill to thickness subfloor will of sill flashing. vary based on thickness of sill2 1 ⁄4" (57) 10 7 ⁄ 16"flashing. (265)
Unobstr. Glass
2 1 ⁄4"
(57) Unit Dimension Width
7 ⁄ 16" (265) Section 10 Horizontal
Unobstr. Glass
Two-Panel
Unit Dimension Width
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
2 1 ⁄4" (57)
5 1 ⁄ 2" (140)
Unobstr. Glass
3 ⁄ 8" (10)
Rough Opening Width 5 1 ⁄ 2" (140)
3 ⁄ 8" (10)
3 ⁄ 8" (10)
10 7 ⁄ 16" (265)
4 9 ⁄ 16" (116) Jamb Depth
Rough Opening Height
3 ⁄ 8" (10)
5 1 ⁄ 2" (140)
5 1 ⁄ 2" (140)
Rough Opening Width 5 1 ⁄ 2" (140)
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33)
Unobstr. Glass
3 ⁄ 8" (10)
6 9 ⁄ 16" (167) Jamb Depth 6 9 ⁄ 16" (167) Jamb Depth 5 1 ⁄ 2" Unobstr. Glass (140) Unit Dimension Width
Unit Dimension Height
4 9 ⁄ 16" (116) Rough Opening Height 1 5 ⁄ 16" Unit Dimension Height (33) Jamb Depth Unit Dimension Height Unobstr. 1 5 ⁄ 16" 5 1 ⁄ 2" 10 7 ⁄ 16" (33) Glass (140) 1 (265) 7 Unobstr. 5 ⁄ 2" 10 ⁄ 16" Glass (140) (265)
(33) 1 5 ⁄ 16" (33)
Rough Opening Height
Scale 11 ⁄ 2" (38) = 1'-0" (305) 1 5 ⁄ 16—" 1:8
Vertical Section
5 1 ⁄ 2" (140)
Unobstr. Glass
3 ⁄ 8" (10)
Rough Opening Width Complementary Arch Inswing Patio Door Details — 6 9 ⁄ 16" (167) Jamb Depth
4 9 ⁄ 16" (116) Jamb Depth 3 ⁄ 8" (10)
(10)
Rough Opening Width
5 1 ⁄ 2" (140)
(143)
3 ⁄ 8"
(10) 3 ⁄ 8"
(10) 3 ⁄ 8"
(10)
Unit Width 10 7 ⁄Dimension 16" (265) Rough Opening Unit Dimension WidthWidth Rough Opening Width Horizontal Section
Unobstr. Glass Unobstr. Glass
5 1 ⁄ 2" (140) 5 1 ⁄ 2" 3 ⁄ 8" (140) (10) 1 5 ⁄ 16" (33)
10 7 ⁄ 16" (265)
3 ⁄ 8" (10)
Rough Opening Width
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
10 7 ⁄ 16" (265)
4 9 ⁄ 16" (116) Jamb Depth
Jamb Depth
1 5 ⁄ 16" (33)
6 9 ⁄ 16" (167) Jamb Depth 6 9 ⁄ 16" (167) 1 5 ⁄ 16" (33)
3 ⁄ 8"
Unobstr. Glass Unobstr. Glass
5 1 ⁄ 2" (140)
(10)
Horizontal Section
5 1 ⁄ 2" (140) 5 1 ⁄ 2" (140)
Unobstr. Glass Unit Dimension Width
Unobstr. Glass
(10) 3 ⁄ 8"
5 1 ⁄ 2" (140)
Unit Dimension Height
3 ⁄ 8"
Rough Opening Height
1 5 ⁄ 16" (33)
Unobstr. 5 5 ⁄ 8" Glass (143) Unobstr. Unit Dimension Width5 5 ⁄ 8" Glass (143) Rough Opening Unit Dimension WidthWidth
(143)
5 5 ⁄ 8"
6 9 ⁄ 16" (167) Jamb Depth
1 5 ⁄ 16" (33)
1 5 ⁄ 16" (33)
Jamb Depth
5 5 ⁄ 8"
1 5 ⁄ 16" (33)
6 9 ⁄ 16" (167) Jamb Depth 6 9 ⁄ 16" (167)
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
5 1 ⁄ 2" 3 ⁄ 8" (140) (10)
Unobstr. Glass
3 ⁄ 8"
10 7 ⁄ 16" (265) Unit Dimension Width
2 1 ⁄4" (57) Unobstr. Glass
Rough Opening Width
(10)
Vertical Section
Two-Panel
6 9 ⁄ 16" (167) Jamb Depth
• 4 9/16" (116) and 6 9/16" (167) jamb depth measurements are from backside of installation flange. • Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
183
5 1 ⁄ 2" (140)
4 9 ⁄ 16" (116) Jamb Depth
COMPLEMENTARY CURVED TOP PATIO DOORS Complementary Arch Outswing Patio Door Details — 4 9 ⁄ 16" (116) Jamb Depth
5 1 ⁄ 2" (140) 3 ⁄ 8" (10)
Unobstr. Glass Unit Dimension Width
5 1 ⁄ 2" (140) 3 ⁄ 8" (10)
Rough Opening Width
Unobstr. Glass
10 1 ⁄ 16" (256) Unit Dimension Width
Unobstr. Glass
1 3 ⁄4" (44)
5 1 ⁄ 2" (140)
3 ⁄ 8" (10)
Rough Opening Width 5 1 ⁄ 2" (140)
Unobstr. Glass
10 1 ⁄Horizontal 16" (256) Section Two-Panel
Unit Dimension Width
Unobstr. Glass
5 1 ⁄ 2" (140)
Rough Opening Width
Vertical Section 3 ⁄ 8" (10)
4 9 ⁄ 16" (116) Jamb Depth
3 ⁄ 8" (10)
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
10 7 ⁄ 16" (265)
1 5 ⁄ 16" (33)
5 1 ⁄ 2" (140)
3 ⁄ 8" (10)
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
4 9 ⁄ 16" (116) Jamb Depth
Horizontal Section
Unit Dimension Height
5 1 ⁄ 2" (140)
5 1 ⁄ 2" (140)
Rough Opening Width
Unobstr. Glass
Unobstr. Glass Unit Dimension Width
Rough Opening Height
1 5 ⁄ 16" (33) 3 ⁄ 8" (10)
3 ⁄ 8" (10)
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33) 5 1 ⁄ 2" (140)
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
1 5 ⁄ 16" (33)
5 1 ⁄ 2" (140)
5 1 ⁄ 2" (140) 3 ⁄ 8" (10)
Rough Opening Width
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
3 ⁄ 8" (10)
Unobstr. Glass Unit Dimension Width
3 ⁄ 8" (10)
5 1 ⁄ 2" (140)
Unobstr. Glass
10 1 ⁄ 16" (256) Unit Dimension Width Rough Opening Width
• 4 9/16" (116) jamb depth measurement is from backside of installation flange. • Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
184
Unobstr. Glass
5 1 ⁄ 2" (140)
FOLDING OUTSWING DOORS
Folding Outswing Doors
FOLDING OUTSWING DOORS
CUSTOM SIZING in 1â &#x201E;8" (3) increments
SECTION REFERENCE Styles & Sizes ............................ 188 Door Details ........................ 189-190 Performance Data ...................... 269 Warranty .............................290-291 Dimensions in parentheses are in millimeters.
FOLDING OUTSWING DOORS B
FEATURES
On-Floor Drainage Sill
Panel
When closed, these doors create a stately wall of light. When open, they transform a room into a gateway to the world outside. With standard or custom panel designs, configurations up to 48' (14630) wide and operating modes that let you open the doors from the left, right or center, Andersen® folding outswing doors will impress even the most demanding customers.
A
The aluminum clad panel has a dual weatherstrip design at the bottom and along the panel edges, providing a weathertight seal. Available in a traditional style with a tall bottom rail and a contemporary style with equal stiles and rails.
C
C
Flush Sill
Sill Three sill options are available:
Frame A Heavy-duty extruded aluminum
C The on-floor drainage sill, which offers
cladding protects the exterior from the elements. Both frame and panels are available with wood exteriors as a special product request.
a PG 30 rating for sizes up to 24' (7315) wide and 10' (3048) tall, is available in painted gray or dark bronze.
Traditional
D The flush sill option places the track
B The engineered wood frame members
even with the finished floor.
are treated with a water-repellent wood preservative for long-lasting* protection and performance.
E The on-floor low-threshold sill option
D
On-Floor Low-Threshold Sill
E
provides easy accessibility. Available in painted gray or dark bronze. Contemporary
EXTERIOR
White
Canvas
INTERIOR
WOOD SPECIES
Sandtone
Terratone
Forest Green
Dark Bronze
Pine
PAINTED OPTIONS
Maple
Oak
Alder
White
Birch Bark
Primed
Naturally occurring variations in grain, color and texture of wood make each door one-of-a-kind. All wood interiors are unfinished unless a painted option is specified.
Dove Gray
Prairie Grass
Red Rock
Cocoa Bean
Black
Cherry
Mahogany** Vertical Grain Douglas Fir
HARDWARE FINISHES Distressed bronze and oil rubbed bronze are "living" finishes that will change with time and use.
Antique Brass
Black
Bright Brass
Brushed Chrome
Distressed Distressed Gold Dust Bronze Nickel
Oil Rubbed Polished Bronze Chrome
Satin Nickel
Stone
White
HARDWARE OPTIONS Bold name denotes finish shown. †
YUMA®
ENCINO ®
ANVERS ®
NEWBURY ®
COVINGTON ™
WHITMORE ®
ALBANY
TRIBECA®
Distressed Bronze Distressed Nickel
Distressed Bronze Distressed Nickel
Bright Brass Oil Rubbed Bronze Satin Nickel
Antique Brass Bright Brass Brushed Chrome Oil Rubbed Bronze Polished Chrome Satin Nickel
Antique Brass Bright Brass Oil Rubbed Bronze
Antique Brass Bright Brass Oil Rubbed Bronze Satin Nickel
Black Gold Dust Stone White
Stone White
* Visit andersenwindows.com/warranty or contact your Andersen supplier for details on our limited warranties. ** Actual wood is Sapele, a non-endangered species of mahogany, grown in Africa, with color and characteristics similar to American mahoganies. † Hardware sold separately. Dimensions in parentheses are in millimeters.
Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
186
Tribeca and Albany hardware are zinc diecast with powder-coated durable finish. Other hardware is solid forged brass. Mix-and-match interior and exterior style and finish options are available. Bright brass and satin nickel finishes feature a 10-year limited warranty.
FOLDING OUTSWING DOORS
ACCESSORIES Sold Separately Hardware
Frame
Exterior Trim
The aluminum exterior frame and clad panels feature a durable, low-maintenance AAMA 2605 finish.
Locking System
Extension Jambs
Aluminum Brick Mould
Standard jamb depth is 6 9⁄16" (167). Interior extension jambs are available in 1⁄16" (1.5) increments between 5 1⁄16" (129) and 12" (305).
Glass Panels are silicone bed glazed and finished with an interior wood stop.
• Low-E4® tempered glass® • Low-E4® HeatLock™ tempered glass • Low-E4® Sun tempered glass • Low-E4® SmartSun™ tempered glass • Low-E4® SmartSun™ HeatLock™ tempered glass Additional glass options are available. Contact your Andersen supplier. A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite.
Rectangular panels are available with virtually any design. See your Andersen supplier for details.
Aluminum brick mould is optional for clad folding doors.
Custom Panel Examples
Wood Brick Mould 1 5 ⁄ 16" (33)
2" (51)
The folding outswing door has a multi-point locking system with a hook bolt above and below the center deadbolt along with flush bolts on the non-active panels that lock into the head and sill. This system provides a weathertight seal and enhanced security. The flush bolts and pull handles are available in a matte black or satin stainless steel finish.
1 5 ⁄ 16" (33)
2" (51)
2" (51)
Panel Options
High-performance glass options include:
1 5 ⁄ 16" (33)
1 5 ⁄ 16" (33)
2" (51)
Wood brick mould is pre-applied and comes standard on wood folding doors.
Pull Handle
Flush Bolt
Dimensions in parentheses are in millimeters.
187
Folding Outswing Doors
Exterior Finish
FOLDING OUTSWING DOORS Folding Outswing Door Styles and Sizes Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96
CUSTOM HEIGHTS Minimum 6'-8"
2-Panels to 16-Panels
(2032)
Maximum 10'-0" (3048)
Custom sized in 1 ⁄ 8" (3) increments. Contact your
CUSTOM WIDTHS Number of Panels
Andersen supplier for Minimum to Maximum
Number of Panels
Minimum to Maximum
Number of Panels
Minimum to Maximum
additional dimensions and specifications.
2-Panel
3'-2 /4" (972) to 6'-8 /8" (2035)
7-Panel
10'-9 /4" (3283) to 22'-11 /8" (7007)
12-Panel
18'-5 /8" (5617) to 39'-4 /8" (11992)
3-Panel
4'-8 5/8" (1438) to 9'-11 1/4" (3029)
8-Panel
12'-4 1/2" (3772) to 26'-3 1/8" (8004)
13-Panel
19'-10 1/4" (6052) to 42'-7 1/8" (12983)
4-Panel
6'-3 7/8" (1927) to 13'-2 1/4" (4020)
9-Panel
13'-9 5/8" (4207) to 29'-6 1/2" (9004)
14-Panel
21'-5 3/8" (6537) to 45'-10 1/2" (13983)
5-Panel
7'-9" (2362) to 16'-5 5/8" (5020)
10-Panel
15'-4 3/4" (4693) to 32'-9 7/8" (10004)
15-Panel
22'-10 1/4" (6966) to 48'-0" (14630)
6-Panel
9'-9 1/8" (2975) to 19'-8 3/4" (6013)
11-Panel
16'-9 7/8" (5128) to 36'-0 3/4" (10992)
16-Panel
24'-4 7/8" (7439) to 48'-0" (14630)
1
1
1
7
1
1
Doors open to the exterior. Traditional panel shown, see page 187 for additional
• "Minimum to Maximum" door width dimensions refers to frame to frame dimension. • Dimensions in parentheses are in millimeters.
panel styles.
Panel Configurations Two-Panel
Four-Panel
Five-Panel
Six-Panel
Seven-Panel
Eight-Panel
2L
4L
5L
6L
7L
8L
2R
3L1R
4L1R
5L1R
6L1R
7L1R
2L2R
3L2R
4L2R
5L2R
6L2R
3L
4R
5R
3L3R AP/PA
4L3R
5L2R AP/PA
2L1R
1L3R
1L4R
6R
7R
4L4R
2L3R
1L5R
1L6R
8R
2L4R
2L5R
1L7R
3L4R
2L6R
Three-Panel
3R 1L2R
Nine-Panel
Ten-Panel
Eleven-Panel
8L1R
8L2R
8L3R
7L2R
7L3R AP/PA
7L4R
6L3R
6L4R
6L5R
5L4R
5L5R AP/PA
5L6R
4L5R
4L6R
4L7R
3L6R
3L7R AP/PA
3L8R
2L7R
2L8R
3L5R AP/PA
Configurations are listed from left to right as viewed from the exterior.
1L8R
Twelve-Panel
Thirteen-Panel
Fourteen-Panel
8L4R
8L5R
8L6R
7L5R AP/PA
7L6R
7L7R AP/PA
6L6R
6L7R
6L8R
5L7R AP/PA
5L8R
4L8R
Fifteen-Panel
Sixteen-Panel
8L7R
8L8R
7L8R
188
FOLDING OUTSWING DOORS Design Criteria
Folding Outswing Doors – Traditional/Contemporary Panel Details Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
To allow for proper performance and operation, verify the structural integrity
1 9 ⁄ 16" (40)
of the header such that the maximum
4 9 ⁄ 16" (116)
4 1 ⁄ 16" (103)
deflection with live and dead loads is limited to the lesser of L/750 of the per panel with Low-E4®, SmartSun™ or Sun glass is 200 pounds or 90 kg. 1 5 ⁄ 16" (33)
Weights using alternate glazings will need to be provided by Andersen.
jamb
5 5 ⁄ 8" (143)
5 5 ⁄ 8" (143) Unit Dimension Minimum Rough Opening
3 ⁄ 8" (10)
Construction
jamb
Folding Outswing Doors
Complete panel details not shown.
6 9 ⁄ 16" (167)
span and 1 ⁄ 4" (6). The maximum weight
3 ⁄ 8" (10)
Horizontal Section Stationary Jamb/Operating Jamb
The standard construction of the folding outswing door is an aluminum clad exterior with a rich wood interior. Clad
1 9 ⁄ 16" (40)
folding door details are shown. Wood
4 9 ⁄ 16" (116)
4 1 ⁄ 16" (103)
folding doors are also available, visit andersenwindows.com/foldingdoors
Complete panel details not shown.
6 9 ⁄ 16" (167)
for more information.
For custom panel sets that meet in the middle, see the panel/astragal details below.
1 5 ⁄ 16" (34) jamb
5 5 ⁄ 8" (143)
5 5 ⁄ 8" (143) Unit Dimension Minimum Rough Opening
3 ⁄ 8" (10)
jamb 3 ⁄ 8" (10)
Horizontal Section Stationary Jamb/Stationary Jamb 1 9 ⁄ 16" (40)
4 9 ⁄ 16" (116)
4 1 ⁄ 16" (116)
6 9 ⁄ 16" (167)
1 9 ⁄ 16" (40)
1 5 ⁄ 16" (33)
9 5 ⁄ 8" (244) jamb
1 9 ⁄ 16" (40) 1 9 ⁄ 16" (40)
6 9 ⁄ 16" (167)
• 6 9 ⁄ 16" (167) jamb depth measurement is from backside of installation flange to inside edge of door frame. • Light-colored areas are included with the door unit. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown and must be specified. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent complete or appropriate product 1 5 ⁄ 16" installation methods or materials for application. Refer to product (33) installation guide. • Dimensions in parentheses are in millimeters. jamb • Clad folding door details are shown. Wood folding door details are available at andersenwindows.com/foldingdoors.
4 1 ⁄ 16" (103)
Horizontal Section Astragal, 4 1 ⁄ 16" Leading/Leading 4 9 ⁄ 16" (103)Unit Dimension(116) Minimum Rough Opening
5 5 ⁄ 8" (143)
jamb
4 9 ⁄ 16" (116)
2 3 ⁄ 16" (56)
6 9 ⁄ 16" (167)
1 9 ⁄ 16" (40)
5 5 ⁄ 8" (143)
1 5 ⁄ 16" (33) 5 5 ⁄ 8" (143)
10 7 ⁄ 16" (265)
9 3 ⁄ 8" (238) jamb
Horizontal Section Astragal, Leading/Active Unit Dimension Minimum Rough Opening
5 5 ⁄ 8" (143)
5 5 ⁄ 8" (143)
5 5 ⁄ 8" (143)
jamb
Horizontal Section Astragal, Passive/Active Unit Dimension Minimum Rough Opening 189
FOLDING OUTSWING DOORS Folding Outswing Doors – Traditional Panel Details Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
1 5 ⁄ 16" (33)
7 1 ⁄ 2" (191)
Unobstr. Glass
head
4 1 ⁄ 8" (105) head sill
8 9 ⁄ 16" (217)
sill
1 13 ⁄ 16" (46)
Vertical Section Traditional Panel, On-Floor Drainage Sill
3 7 ⁄ 16" (87)
Unobstr. Glass
4 1 ⁄ 8" (105)
1 ⁄ 2"(13)
Dimension from subfloor to top of door threshold may vary with type of installation method used.
6 9 ⁄ 16" (167)
3 7 ⁄ 16" (87)
9 1 ⁄ 16" (230)
sill
Minimum Rough Opening Unit Dimension
Unobstr. Glass
head
9 9 ⁄ 16" (243)
Minimum Rough Opening Unit Dimension
4 1 ⁄ 8" (105)
1 5 ⁄ 16" (33)
7 1 ⁄ 2" (191)
3 7 ⁄ 16" (87)
6 9 ⁄ 16" (167)
Minimum Rough Opening Unit Dimension
6 9 ⁄ 16" (167)
7 1 ⁄ 2" (191)
1 5 ⁄ 16" (33)
1 3 ⁄4" (44)
1"(25)
7 ⁄ 16"
(11)
Dimension from top of finished floor.
Vertical Section Traditional Panel, On-Floor Low-Threshold Sill
1 3 ⁄4" (44)
7 ⁄ 8" (22)
15 ⁄ 16" (24)
Dimension from top of finished floor.
Vertical Section Traditional Panel, Flush Sill (track-in-floor)
Folding Outswing Doors – Contemporary Panel Details Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
head sill
1 13 ⁄ 16" (46) Dimension from subfloor to top of door threshold may vary with type of installation method used.
Vertical Section Contemporary Panel, On-Floor Drainage Sill
7 1 ⁄ 2" (191)
3 7 ⁄ 16" (87) 4 1 ⁄ 8" (105)
1 ⁄ 2"(13) 7 ⁄ 16"
head sill
(11)
Vertical Section Contemporary Panel, On-Floor Low-Threshold Sill
7 ⁄ 8" (22)
Dimension from top of finished floor.
Dimension from top of finished floor.
Vertical Section Contemporary Panel, Flush Sill (track-in-floor)
• 6 9 ⁄ 16" (167) jamb depth measurement is from backside of installation flange to inside edge of door frame. • Light-colored areas are included with the door unit. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown and must be specified. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent complete or appropriate product installation methods or materials for application. Refer to product installation guide. • Dimensions in parentheses are in millimeters. • Clad folding door details are shown. Wood folding door details are available at andersenwindows.com/foldingdoors.
190
6 9 ⁄ 16" (167)
4 15 ⁄ 16" (125)
Unobstr. Glass
4 1 ⁄ 8" (105)
5 7⁄ 16" (138)
sill
Minimum Rough Opening Unit Dimension
Unobstr. Glass
head
5 15 ⁄ 16" (151)
Minimum Rough Opening Unit Dimension
4 1 ⁄ 8" (105)
3 7 ⁄ 16" (87)
7 1 ⁄ 2" (191)
3 7 ⁄ 16" (87)
1 5 ⁄ 16" (33)
6 9 ⁄ 16" (167)
Unobstr. Glass
1 5 ⁄ 16" (33)
Minimum Rough Opening Unit Dimension
6 9 ⁄ 16" (167)
7 1 ⁄ 2" (191)
1 5 ⁄ 16" (27)
ENTRY DOORS
Entry Doors
ENTRY DOORS
SECTION REFERENCE Residential Springline™ Entry Doors Door Dimensions & Specifications ......................... 193 Door Details ..................... 194-195
Residential Arch & Rectangular Entry Doors Door & Sidelight Dimensions & Specifications .................. 196-199 Door & Sidelight Details ....200-202 Joining Details ......................... 203
Entry Door Transoms Transom Dimensions & Specifications ...............204-205 Transom Details & Joining Details ..............205-206
Commercial Outswing Entry Doors .............................. 207
CUSTOM SIZING in 1⁄8" (3) increments
Door & Sidelight Dimensions & Specifications .................. 208-210 Door & Sidelight Details ........... 211 Performance Data ...................... 269 Warranty .............................290-291 Dimensions in parentheses are in millimeters.
RESIDENTIAL ENTRY DOORS FEATURES
ACCESSORIES Sold Separately
B
Frame A Heavy-duty extruded aluminum
A
cladding protects the frame exterior, providing low-maintenance durability. Standard cladding finish meets AAMA 2604. An optional finish that meets the AAMA 2605 standard is also available.
H
B Wood frame members are treated with
E
C
Outswing
C Extruded aluminum sill is thermally
include: Low-E4® tempered, Low-E4® HeatLock™ tempered, Low-E4® Sun tempered, Low-E4® SmartSun™ tempered, Low-E4® SmartSun™ HeatLock™ tempered glass. Additional glass options are available. Contact your Andersen supplier.
at the frame sides and head protects against air and water infiltration. Flexible thermoplastic sweep is featured at the bottom of the panel on inswing units. Outswing doors also feature a polypropylene rain skirt at the panel sides and top for added protection.
Panel E Heavy-duty extruded aluminum cladding protects the panel exterior, providing low-maintenance durability. Panels also available without cladding.
F Panel interior surfaces are unfinished wood veneers. Available species are pine, maple, oak, alder, cherry, mahogany** and vertical grain douglas fir.
Canvas
Sandtone
Terratone
Interior extension jambs on inswing units will restrict the full opening of the door. Casings Curved interior casings are available in the same profiles as other Andersen® products. Curved exterior aluminum and wood casings are available in matching radii and a variety of profiles.
For hardware purchased separately, doors can be ordered predrilled for easy on-site installation. They can also be specified without hardware drilling.
two-sided silicone tape provides superior weathertightness.
H High-performance glass options
A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite. 112102 102
Hardware Handle Extension
Operation Inswing and outswing units are available. Choose left-hinged, right-hinged or stationary as viewed from the exterior. 244
660
333
653
221
Sill A low-profile commercial sill is also available. See page 207 for more details.
Panel Designs
671 216181 181
219 340335 335
217 320
662
218 679
Multi-Point Locking System/Expanded Offering 339194 194
113
Residential entry doors have a multi-point locking option with a hook bolt above and below the center deadbolt. This system provides a weathertight seal and enhanced security. Mix-and-match style and finish 635 272 272 options are available to get just the right look inside and out. For style and finish options, see pages 14-15.
672179 179
207 639 708334 334
Dark Bronze
Exterior Keyed Lock
184
203 674
209 603 213
214
201
Grilles Grilles are available in a variety of configurations and widths. 655 620 705 705
704 704
703
702
For additional panel design ideas, see our Entranceways brochure at andersenwindows.com/entrydoors.
616
Forest Green
Handle extensions extend interior door handles an additional 1" (25) from the door panel to accommodate interior blinds or shades. A second extender may be added to the spindle to increase the length an additional 1" (25) to a 2" (51) total extension. Extenders and spindles are sold separately. Extenders are available in finishes that coordinate with hardware. A six-pin key cylinder lock is available in styles and finishes that coordinate with hardware. This lock allows the door to be locked and unlocked from the exterior.
Hardware
EXTERIOR
White
Inswing and outswing standard jamb depth is 4 9⁄16" (116). Inswing is also available in a 6 9⁄16" (167) jamb depth. Interior extension jambs are available in 1⁄16" (1.5) increments between 4 9⁄16" (116) and 7 1⁄8" (181). Additional dimensions are available. Contact your Andersen supplier for more information.
Aftermarket Hardware
Glass G Silicone glazing bead combined with
D One-piece compression weatherstripping
Extension Jambs
Gold dust finish is standard on wood interior doors. For units with a prefinished White interior, white finish hinges are standard. Also available in finishes that coordinate with hardware.
a water-repellent wood preservative for longlasting* protection and performance. Radii are made of laminated continuous veneers. Lineal components are engineered wood with a pine core. broken and available in painted bronze or gray finish. Innovative sill design provides superior water management. Standard outswing sills have an oak cap. Maple or mahogany** is optional. Inswing sills have an interior wood trim strip to match the interior finish.
Frame
Ball-bearing hinges are standard on outswing entry doors and are available in stainless steel, dark bronze and white finishes to complement hardware trim sets. Adjustable hinges are standard on inswing entry doors and have ball-bearing pivots for smooth, frictionless movement. Features easy horizontal and vertical adjustment, plus quick-release feature for easy panel removal. This feature is ideal for transporting large units up stairs or to other hard-to-reach areas.
G
Installation flange extends 1 1⁄2" (38) F around three sides of the unit to help properly position the unit in the opening. Installation clips are standard Inswing for increased structural anchoring to building members. Mounted around the frame perimeter, the clips rotate into position D and can be bent into place against the framing members to suit all jamb conditions.
Hinges
Art Glass Decorative insulated art glass designs are available.
709
EXTERIOR / INTERIOR
INTERIOR
WOOD SPECIES (Additional species available)
PAINTED OPTIONS
Pine
White
Maple
Oak
Alder
Birch Bark
Primed
Naturally occurring variations in grain, color and texture of wood make each door one-of-a-kind. All wood interiors are unfinished unless a painted option is specified.
Dove Gray
Prairie Grass
Red Rock
Cocoa Bean
Black
Cherry
Mahogany** Vertical Grain Douglas Fir
* Visit andersenwindows.com/warranty or contact your Andersen supplier for details on our limited warranties. ** Actual wood is Sapele, a non-endangered species of mahogany, grown in Africa, with color and characteristics similar to American mahoganies. Dimensions in parentheses are in millimeters. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
192
ENTRY DOORS
Custom-size doors are available in 1 ⁄ 8" (3) increments.
AESHIDxx68
AESHIDxx80
Available in custom designed panels, see page 192. Stationary
AESHIDxx80AP/PA
doors are also available (i.e. AESHID3080S or AESHID4080SS).
Springline Inswing Entry Door Dimensions and Specifications ™
Number of Panels Radius Open* Inches/(mm)
Door Dimensions Shoulder Height Width Inches/(mm) Inches/(mm)
Min. Rough Opening Height Inches/(mm)
Width Inches/(mm)
Height Inches/(mm)
Clear Opening Area Sq. Ft./(m2)
Clear Opening Maximums 90° Width Inches/(mm)
Full Width Inches/(mm)
Height Inches/(mm)
Vent Area Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
AESHID3068
1
18 7/8" (479) 63 1/8" (1603) 37 11/16" (957)
AESHID3668
1
21 7/8" (556) 60 1/8" (1527) 43 11/16" (1110) 82" (2083) 44 3/16" (1122) 82 1/2" (2096) 16.64 (1.55) 38 13/16" (986)
40 7/8" (1038) 58 5/8" (1489) 21.21 (1.97) 23.46 (2.18)
AESHID3080
1
18 7/8" (479) 76 1/8" (1934) 37 11/16" (957)
34 7/8"
AESHID3680
1
21 7/8" (556) 73 1/8" (1857) 43 11/16" (1110) 95" (2413) 44 3/16" (1122) 95 1/2" (2426) 20.33 (1.89) 38 13/16" (986)
AESHID4080
2
AESHID4080
1
AESHID5080
82" (2083) 38 3/16" 95" (2413) 38 3/16"
(970) (970)
82 1/2" (2096) 14.92 (1.39) 32 13/16" (833) 95 1/2" (2426) 18.07 (1.68) 32 13/16" (833)
34 7/8"
(886) (886)
61 5/8" (1565) 18.25 (1.70) 20.41 (1.90) 74 5/8" (1895) 21.40 (1.99) 23.81 (2.21)
40 7/8" (1038) 71 5/8" (1819) 24.90 (2.31) 27.40 (2.55)
25 3/8" (645) 69 5/8" (1768)
50 3/4"
(1289) 95" (2413)
51 1/4"
(1302) 95 1/2" (2426) 22.68 (2.11) 43 13/16" (1113) 47 15/16" (1218) 68 1/8" (1730) 28.95 (2.69) 31.56 (2.93)
25 /8" (645) 69 5/8" (1768)
50 /4"
(1289) 95" (2413)
51 /4"
(1302) 95 1/2" (2426) 10.85 (1.01)
2
31 3/8" (797) 63 5/8" (1616)
62 3/4"
(1594) 95" (2413)
63 1/4"
(1607) 95 1/2" (2426) 25.86 (2.40) 55 13/16" (1418) 59 15/16" (1522) 62 1/8" (1578) 35.66 (3.31) 38.46 (3.57)
AESHID5080
1
31 3/8" (797) 63 5/8" (1616)
62 3/4"
(1594) 95" (2413)
63 1/4"
(1607) 95 1/2" (2426) 12.48 (1.16)
AESHID5480
2
33 3/8" (848) 61 5/8" (1565)
66 3/4"
(1695) 95" (2413)
67 1/4"
(1708) 95 1/2" (2426) 26.70 (2.48) 59 13/16" (1519) 63 15/16" (1624) 60 1/8" (1527) 37.85 (3.52) 40.72 (3.78)
AESHID5480
1
33 3/8" (848) 61 5/8" (1565)
66 3/4"
(1695) 95" (2413)
67 1/4"
(1708) 95 1/2" (2426) 12.92 (1.20)
AESHID6080
2
37 3/8" (949) 57 5/8" (1464)
74 3/4"
(1899) 95" (2413)
75 1/4"
(1911) 95 1/2" (2426) 28.04 (2.60) 67 13/16" (1722) 71 15/16" (1827) 56 1/8" (1426) 42.15 (3.92) 45.15 (4.19)
AESHID6080
1
37 3/8" (949) 57 5/8" (1464)
74 3/4"
(1899) 95" (2413)
75 1/4"
(1911) 95 1/2" (2426) 13.62 (1.27)
AESHID7080
2
43 3/8" (1102) 51 5/8" (1311)
86 3/4"
(2203) 95" (2413)
87 1/4"
(2216) 95 1/2" (2426) 29.22 (2.71) 79 13/16" (2027) 83 15/16" (2132) 50 1/8" (1273) 48.43 (4.50) 51.62 (4.80)
AESHID7080
1
43 3/8" (1102) 51 5/8" (1311)
86 3/4"
(2203) 95" (2413)
87 1/4"
(2216) 95 1/2" (2426) 14.25 (1.32)
AEAHIDxx68
AEAHIDxx80 3
/PA AEAHIDxx68AP 3
AEAHIDxx80AP/PA 1
20 7/8" 26 7/8" 28 7/8" 32 7/8" 38 7/8"
(530) 22 15/16" (583) (683) 28
/16" (735)
15
(733) 30 15/16" (786) (835) 34 15/16" (887)
68 1/8" (1730) 13.79 (1.28) 31.56 (2.93) 62 1/8" (1578) 17.14 (1.59) 38.46 (3.57) 60 1/8" (1527) 18.24 (1.69) 40.72 (3.78) 56 1/8" (1426) 20.39 (1.89) 45.15 (4.19)
(987) 40 15/16" (1040) 50 1/8" (1273) 23.53 (2.19) 51.62 (4.80)
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening"AEASLDxx80 dimensions may need to beAEASLIxx68 increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. AEASLDxx68 AEASLIxx80 • Dimensions in parentheses are in millimeters or square meters. AEASLOxx68 AEASLOxx80 *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed.
Custom-size doors are available in 1 ⁄ 8" (3) increments. AEHIDxx68
AEHIDxx80
AESODxx68
AESODxx80
AEHIDxx68AP/PA
AEHIDxx80AP/PA
Available in custom designed panels, see page 192. Stationary
AESODxx80AP/PA
doors are also available (i.e. AESOD3080S or AESOD4080SS).
Springline™ Outswing Entry Door Dimensions and Specifications Door Number
Number of Panels Radius Open* Inches/(mm)
Door Dimensions Shoulder Height Width Inches/(mm) Inches/(mm)
Min. Rough Opening Height Inches/(mm)
Width Inches/(mm)
Height Inches/(mm)
Clear Opening Area Sq. Ft./(m2)
Clear Opening Maximums 90 Width Inches/(mm) °
Full Width Inches/(mm)
Height Inches/(mm)
Vent Area Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
AESOD3068
1
18 7/8" (479) 63 1/8" (1603) 37 11/16" (957)
82 1/2" (2096) 15.01 (1.39)
33 1/8"
(841) 35 1/16"
AESOD3668
1
21 7/8" (556) 60 1/8" (1527) 43 11/16" (1110) 82" (2083) 44 3/16" (1122) 82 1/2" (2096) 16.72 (1.55)
39 1/8"
(994) 41 1/16" (1043) 58 5/8" (1489) 21.29 (1.98) 23.46 (2.18)
AESOD3080
1
18 7/8" (479) 76 1/8" (1934) 37 11/16" (957)
95 1/2" (2426) 18.17 (1.69)
33 1/8"
(841) 35 1/16"
AESOD3680
1
21 7/8" (556) 73 1/8" (1857) 43 11/16" (1110) 95" (2413) 44 3/16" (1122) 95 1/2" (2426) 20.42 (1.90)
39 1/8"
(994) 41 1/16" (1043) 71 5/8" (1819) 25.00 (2.32) 27.40 (2.55)
AESLDxx68
AEAODxx68 2 AESOD4080
AESLDxx80
82" (2083) 38 3/16" 95" (2413) 38 3/16"
(970) (970)
(891) (891)
61 5/8" (1565) 18.34 (1.70) 20.41 (1.90) 74 5/8" (1895) 21.50 (2.00) 23.81 (2.21)
1/ " /PA AEAODxx80 25 3/8" (645) 69 5/8"AEAODxx68AP (1768) 50 3/4/" PA(1289) AEAODxx80AP 95" (2413) 51 (1302) 95 1/2" (2426) 22.77 (2.12) 44 3/16" (1122) 48 1/8" (1222) 68 1/8" (1730) 29.04 (2.70) 31.56 (2.93) 4
AESOD4080
1
25 3/8" (645) 69 5/8" (1768)
50 3/4"
(1289) 95" (2413)
51 1/4"
(1302) 95 1/2" (2426) 10.88 (1.01)
AESOD5080
2
31 3/8" (797) 63 5/8" (1616)
62 3/4"
(1594) 95" (2413)
63 1/4"
(1607) 95 1/2" (2426) 25.94 (2.41) 56 3/16" (1427) 60 1/8" (1527) 62 1/8" (1578) 35.74 (3.32) 38.46 (3.57)
AESOD5080
1
31 3/8" (797) 63 5/8" (1616)
62 3/4"
(1594) 95" (2413)
63 1/4"
(1607) 95 1/2" (2426) 12.51 (1.16)
AESOD5480
2
33 3/8" (848) 61 5/8" (1565)
66 3/4"
(1695) 95" (2413)
67 1/4"
(1708) 95 1/2" (2426) 26.77 (2.49) 60 3/16" (1529) 64 1/8" (1629) 60 1/8" (1527) 37.92 (3.52) 40.72 (3.78)
AESOD5480
1
33 3/8" (848) 61 5/8" (1565)
66 3/4"
(1695) 95" (2413)
67 1/4"
(1708) 95 1/2" (2426) 12.94 (1.20)
AESOD6080
2
37 3/8" (949) 57 5/8" (1464)
74 3/4"
(1899) 95" (2413)
75 1/4"
(1911) 95 1/2" (2426) 28.11 (2.61) 68 3/16" (1732) 72 1/8" (1832) 56 1/8" (1426) 42.23 (3.92) 45.15 (4.19)
AESOD6080
1
37 3/8" (949) 57 5/8" (1464)
74 3/4"
(1899) 95" (2413)
75 1/4"
(1911) 95 1/2" (2426) 13.64 (1.27)
AESOD7080
2
43 3/8" (1102) 51 5/8" (1311)
86 3/4"
(2203) 95" (2413)
87 1/4"
(2216) 95 1/2" (2426) 29.28 (2.72) 80 3/16" (2037) 84 1/8" (2137) 50 1/8" (1273) 48.50 (4.51) 51.62 (4.80)
21" 27" 29" 33"
(533) (686) (737) (838)
23" 29" 31" 35"
(584) (737) (787) (889)
68 1/8" (1730) 13.79 (1.28) 31.56 (2.93) 62 1/8" (1578) 17.14 (1.59) 38.46 (3.57) 60 1/8" (1527) 18.24 (1.69) 40.72 (3.78) 56 1/8" (1426) 20.39 (1.89) 45.15 (4.19)
AESLIxx68 AESOD7080
3/ " (1102) 51 5/ " (1311) 86 3/4" (2203) 95" (2413) 87 1/4" (2216) 95 1/2" (2426) 14.27 (1.33) 39" (991) 41" (1041) 50 1/8" (1273) 23.53 (2.19) 51.62 (4.80) 1 43AESLIxx80 8 8 AESLOxx68 AESLOxx80 • "Door Dimension" always refers to outside frame to frame dimension. AEASLDxx68 AEASLDxx80 AEASLIxx68 AEASLIxx80 AEASLOxx80 • "Minimum Rough Opening" dimensions may need to beAEASLOxx68 increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details.
• Dimensions in parentheses are in millimeters or square meters. *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed.
193
Entry Doors
Door Number
1 ⁄ 2" (38)
RESIDENTIAL ENTRY DOORS 4 9 ⁄ 16" (116) Jamb Depth
GLINE INSWING 6
NGLINE Springline INSWING™ Inswing 6 Entry Door Details — 4 9 ⁄ 16" (116) Jamb Depth Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
3 ⁄ 8" (10)
1 5 ⁄ 16" (33)
5 ⁄ 16" 4 9 ⁄ 16"1 (116) (33) Jamb Depth
4 9 ⁄ 16" (116) Jamb Depth
Horizontal Section
3 ⁄ 8" (10)
6 7 ⁄ 16" (164)
12 1 ⁄4" (311)
Unobstr. Glass
6 7 ⁄ 16" (164)
Unobstr. Glass
Unit Dimension Width Rough Opening Width
6 7 ⁄ 16" (164)
Horizontal (311) 12 1 ⁄4"Section
Unobstr. Glass
Unobstr. Glass
Two-Panel
Unit Dimension Width
6 7 ⁄ 16" (164)
Rough Opening Width
6 7 ⁄ 16" (164) Unobstr. Glass
Rough Opening Height Rough Opening Height
Rough Opening Width
(164)
3 ⁄ 8" (10)
Unit Dimension Height
Unit Dimension Width
3 ⁄ 8" (10)
Rough Opening Height
6 7 ⁄ 16" (164)
Unobstr. Glass
Unobstr. 6 7 ⁄ 16" Glass
1 5 ⁄ 16" (33)
6 7 ⁄ 16" (164)
6 7 ⁄ 16" (164)
(10)
Rough Opening Width
Unobstr. Glass
(10)
6 9 ⁄ 16" (167) Jamb Depth
1 5 ⁄ 16" (33)
3 ⁄ 8"
11 11 ⁄ 16" (297)
Unit Dimension Width
3 ⁄ 8"
11 11 ⁄ 16" (297)
6 7 ⁄ 16" (164)
11 11 ⁄ 16" (297)
Unobstr. Glass
Unit Dimension Height Unit Dimension Height
5
⁄ 16" 4 9 ⁄ 161" (116) (33) Jamb Depth
6 7 ⁄ 16" (164)
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" 6 9 ⁄ 16" (167) (33) Jamb Depth
1 5 ⁄ 16" (33)
3 ⁄ 8" (10)
Dimension from top of sill to subfloor will vary based on thickness of sill Dimension from flashing. top of sill to subfloor will 1 1 ⁄ 2on " vary based (38) thickness of sill flashing.
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
1 1 ⁄ 2" (38)
1 1 ⁄ 2" (38) Vertical Section 3 ⁄ 8" (10)
Springline™ INSWING Inswing Entry6 Door Details — 6 9 ⁄ 16" (167) Jamb Depth SPRINGLINE 4 9 ⁄ 16" (116) Jamb Depth
6 9 ⁄ 16" (167) 1 5 ⁄ 16"6 9 ⁄ 16" (167) (33) Jamb Depth Jamb Depth
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
3 ⁄ 8"
(10)
(10)
(164) 3 ⁄ 8" (10)
Rough Opening Width
1 5 ⁄ 16" (33)
3 ⁄ 8" (10)
6 7 ⁄ 16" (164) 6 7 ⁄ 16" (164)
Unobstr. Glass Unobstr. Glass
12 1 ⁄4" (311) Unit Dimension Width 1 ⁄4" (311) Rough12 Opening Width
Unit Dimension Width Horizontal Section Rough Opening Width Two-Panel
Unobstr. Glass Unobstr. Glass
Rough Opening Height
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
6 9 ⁄ 16" (167) 1 5 ⁄ 16"6 9 ⁄ 16" (167) (33) Jamb Depth Jamb Depth
Horizontal Section
6 7 ⁄ 16" (164)
6 7 ⁄ 16" (164)
3 ⁄ 8" 3 ⁄ 8" (10) (10) 3 ⁄ 8" (10)
6 7 ⁄ 16" (164)
Unobstr. Glass
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
12 1 ⁄4" (311) Unit Dimension Width Rough Opening Width
Vertical Section
6 9 ⁄ 16" (167) Jamb Depth
• 4 9/16" (116) and 6 9/16" (167) jamb depth measurements are from backside of installation flange. • Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters. • Clad details shown, wood also available.
194
3 ⁄ 8" (10)
Rough Opening Width (164)
Unobstr.
Glass Width (164) Rough Opening Unit Dimension Width
6 7 ⁄ 16"
Unobstr. Glass
6 7 ⁄ 16"
6 7 ⁄ 16"
(10)
Unit Dimension Width
3 ⁄ 8" (10)
3 ⁄ 8"
6 7 ⁄ 16" (164)
Unobstr. Glass
11 11 ⁄ 16" (297)
Unit Dimension Width
6 7 ⁄ 16" (164)
(33)
6 7 ⁄ 16" (164)
Unit Dimension Height
1 5 ⁄ 16" (33)
Unobstr. Glass
1 5 ⁄ 16"
6 7 ⁄ 16" (164) 3 ⁄ 8"
3 ⁄ 8" (10)
6 9 ⁄ 16" (167) Jamb Depth
1 5 ⁄ 16" (33)
1 1 ⁄ 2" (38)
Unobstr. Glass
6 (16
4 9 ⁄ 16" (116) 1 5 ⁄ 16" ⁄ 16" (116) Jamb Depth 4 9(33) Jamb Depth
1 1 ⁄ 2" (38)
ENTRY DOORS
Springline™ Outswing Entry Door Details — 4 9 ⁄ 16" (116) Jamb Depth Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
6 7 ⁄ 16" (164)
3 ⁄ 8" (10)
Rough Opening Height
Rough Opening Width
3 ⁄ 8" (10)
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) 1 5 ⁄ 16" ⁄ 16" (116) Jamb Depth 4 9(33) Jamb Depth
Horizontal Section
12 1 ⁄4" (311)
Unobstr. Glass
6 7 ⁄ 16" (164)
Unobstr. Glass
Unit Dimension Width Rough Opening Width 12 1 ⁄4" (311) Horizontal Section Unit Dimension Width
Unobstr. Glass
Unobstr. Glass
6 7 ⁄ 16" (164)
1 1 ⁄ 2" (38)
3 ⁄ 8" (10)
6 7 ⁄ 16" (164)
Vertical Section
3 ⁄ 8" (10)
Two-Panel
Rough Opening Width
4 9 ⁄ 16" (116) Jamb Depth
3 ⁄ 8" (10)
6 7 ⁄ 16" (164)
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
Entry Doors
3 ⁄ 8" (10)
Unobstr. Glass
1 5 ⁄ 16" (33)
Rough Opening Width Unobstr. 6 7 ⁄ 16" 6 7 ⁄ 16" Glass (164) (164) Unit Dimension Width
6 7 ⁄ 16" (164)
3 ⁄ 8" (10)
(303)
Unit Dimension Width
Unit Dimension Height
Unobstr. Glass
11 15 ⁄ 16"
6 7 ⁄ 16" (164) 3 ⁄ 8" (10)
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33)
1 5 ⁄ 16" (33)
6 7 ⁄ 16" (164)
Unobstr. Glass
Unit Dimension Width
3 ⁄ 8" (10)
3 ⁄ 8" (10)
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
Rough Opening Width
6 7 ⁄ 16" (164)
3 ⁄ 8" (10)
3 ⁄ 8" (10)
6 7 ⁄ 16" (164)
Unobstr. Glass
12 1 ⁄4" (311) Unit Dimension Width Rough Opening Width
Unobstr. Glass
6 7 ⁄ 16" (164)
3 ⁄ 8" (10)
• 4 9/16" (116) jamb depth measurement is from backside of installation flange. • Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters. • Clad details shown, wood also available.
195
RESIDENTIAL ENTRY DOORS Order Designation Description Viewed from the exterior.
17
AEAHID 3168
Flanking unit width
Door rough opg.
A
L
17
Active Left panel hinged
AESHIDxx80
A
R
Door Active Right rough opg. panel hinged
Flanking unit width
Andersen Entry Arch Hinged Inswing Door AESHIDxx68
AEAHID 3168
17
AEAHID 6480 Door rough opg.
Flanking unit width
Andersen Entry Arch Hinged Inswing Door
A
Andersen Entry Arch Hinged Inswing Door
P
L
Right hinged
Passive panel Active panel
R
Left hinged
AESHIDxx80AP/PA
Arch inswing entry doors (AEAHID) shown above, for outswing arch entry doors use AEAOD. Outswing entry doors open outward to the exterior.
Custom-size doors are available in 1 ⁄ 8" (3) increments.
AEAHIDxx68
AEAHIDxx80
AEAHIDxx68AP/PA
Available in custom designed panels, see page 192. Stationary
AEAHIDxx80AP/PA
doors are also available (i.e. AEAHID2068S or AEAHID4068SS).
Arch Inswing Entry Door Dimensions and Specifications Door Number
Number of Panels Open*
Radius Inches/(mm)
Door Dimensions Shoulder Height Width Height Inches/(mm) Inches/(mm) Inches/(mm)
Min. Rough Opening Width Inches/(mm)
Clear Opening Maximums Clear Opening Area Sq. Ft./(m2)
90° Width Inches/(mm)
Full Width Inches/(mm)
Height Inches/(mm)
Vent Area Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
AEAHID2068
1
(665)
82 1/2" (2096) 12.26 (1.14) 20 13/16" (529)
22 7/8"
(581) 77 3/16" (1961) 12.46 (1.16) 14.49 (1.35)
AEAHID2668
1
48"
(1219) 79 5/16" (2015) 31 11/16" (805) 82" (2083) 32 3/16"
(818)
82 1/2" (2096) 15.39 (1.43) 26 13/16" (681)
28 7/8"
(733)
AEAHID2868
1
48"
(1219) 78 15/16" (2005) 33 11/16" (856) 82" (2083) 34 3/16"
(868)
82 1/2" (2096) 16.39 (1.52) 28 13/16" (732)
30 7/8"
(784) 76 7/16" (1942) 16.77 (1.56) 18.95 (1.76)
AEAHID3068
1
48"
(1219) 78 1/8" (1984) 37 11/16" (957) 82" (2083) 38 3/16"
(970)
82 1/2" (2096) 18.33 (1.70) 32 13/16" (833)
34 7/8"
(886) 75 11/16" (1922) 18.88 (1.75) 21.13 (1.96)
AEAHID3668
AEASLDxx68 1
37 1/16" (941) 79 11/16" (2024) 25 11/16" (652) 82" (2083) 26 3/16"
Height Inches/(mm)
76 3/4" (1949) 15.70 (1.46) 17.85 (1.66)
(1219) 76 3/4" (1949) 43 11/16" (1110) 82" (2083) 44 3/16" (1122) 82 1/2" (2096) 21.11 (1.96) 38 13/16" (986) 40 7/8" (1038) 74 3/8" (1889) 22.01 (2.04) 24.36 (2.26) AEASLDxx80 AEASLIxx68 AEASLIxx80 AEASLOxx68 37 1/16" (941) 92 11/16" (2354) 25 11/16" (652) 95"AEASLOxx80 (2413) 26 3/16" (665) 95 1/2" (2426) 14.33 (1.33) 20 13/16" (529) 22 7/8" (581) 90 3/16" (2291) 14.53 (1.35) 16.81 (1.56) 48"
AEAHID2080
1
AEAHID2680
1
48"
(1219) 92 5/16" (2345) 31 11/16" (805) 95" (2413) 32 3/16"
(818)
95 1/2" (2426) 18.00 (1.67) 26 13/16" (681)
28 7/8"
(733)
AEAHID2880
1
48"
(1219) 91 15/16" (2335) 33 11/16" (856) 95" (2413) 34 3/16"
(868)
95 1/2" (2426) 19.18 (1.78) 28 13/16" (732)
30 7/8"
(784) 89 7/16" (2272) 19.55 (1.82) 21.99 (2.04)
AEAHID3080
1
48"
(1219) 91 1/8" (2315) 37 11/16" (957) 95" (2413) 38 3/16"
(970)
95 1/2" (2426) 21.48 (2.00) 32 13/16" (833)
34 7/8"
(886) 88 11/16" (2253) 22.03 (2.05) 24.53 (2.28)
AEAHID3680
1
48"
(1219)
89 3/4" (2280) 43 11/16" (1110) 95" (2413) 44 3/16" (1122) 95 1/2" (2426) 24.80 (2.30) 38 13/16" (986)
89 3/4" (2280) 18.31 (1.70) 20.71 (1.92)
40 7/8" (1038) 87 3/8" (2219) 25.70 (2.39) 28.30 (2.63)
AEAHID4068
2
48"
(1219)
74 3/4" (1899)
50 3/4" (1289) 82" (2083)
51 1/4"
(1302) 82 1/2" (2096) 24.11 (2.24) 43 13/16" (1113) 47 15/16" (1218) 72 7/16" (1840) 25.61 (2.38) 28.07 (2.61)
AEAHID4068
1
48"
(1219)
74 3/4" (1899)
50 3/4" (1289) 82" (2083)
51 1/4"
(1302) 82 1/2" (2096) 11.54 (1.07)
AEAHID5068
2
96"
(2438)
76 3/4" (1949)
62 3/4" (1594) 82" (2083)
63 1/4"
(1607) 82 1/2" (2096) 30.88 (2.87) 55 13/16" (1418) 59 15/16" (1522) 74 3/16" (1884) 32.24 (3.00) 34.97 (3.25)
AEAHID5068
1
96"
(2438)
76 3/4" (1949)
62 3/4" (1594) 82" (2083)
63 1/4"
(1607) 82 1/2" (2096) 14.91 (1.39)
AEAHID5468
2
96"
(2438)
AEAHID6068
2
96"
(2438) 74 7/16" (1891)
74 3/4" (1899) 82" (2083)
75 1/4"
(1911) 82 1/2" (2096) 35.94 (3.34) 67 13/16" (1722) 71 15/16" (1827) 71 15/16" (1827) 38.33 (3.56) 41.27 (3.83)
AEAHID6068
1
96"
(2438) 74 7/16" (1891)
74 3/4" (1899) 82" (2083)
75 1/4"
(1911) 82 1/2" (2096) 17.45 (1.62)
AEAHID7068
2
96"
(2438) 71 5/8" (1819)
86 3/4" (2203) 82" (2083)
87 1/4"
(2216) 82 1/2" (2096) 40.37 (3.75) 79 13/16" (2027) 83 15/16" (2132) 69 1/4" (1759) 44.22 (4.11) 47.36 (4.40)
AEAHID7068
1
96"
(2438) 71 5/8" (1819)
86 3/4" (2203) 82" (2083)
87 1/4"
(2216) 82 1/2" (2096) 19.69 (1.83)
AEAHID4080
2
48"
(1219)
87 3/4" (2229)
50 3/4" (1289) 95" (2413)
51 1/4"
(1302) 95 1/2" (2426) 28.44 (2.64) 43 13/16" (1113) 47 15/16" (1218) 85 7/16" (2170) 29.94 (2.78) 32.65 (3.03)
AEAHID4080
1
48"
(1219)
87 3/4" (2229)
50 3/4" (1289) 95" (2413)
51 1/4"
(1302) 95 1/2" (2426) 13.61 (1.26)
AEAHID5080
2
96"
(2438)
89 3/4" (2280)
62 3/4" (1594) 95" (2413)
63 1/4"
(1607) 95 1/2" (2426) 36.29 (3.37) 55 13/16" (1418) 59 15/16" (1522) 87 3/16" (2215) 37.65 (3.50) 40.64 (3.78)
AEAHID5080
1
96"
(2438)
89 3/4" (2280)
62 3/4" (1594) 95" (2413) 63 1/4"
(1607) 95 1/2" (2426) 17.52 (1.63)
AEAHID5480
2
96"
(2438)
89"
(2261)
66 3/4" (1695) 95" (2413)
67 1/4"
(1708) 95 1/2" (2426) 38.41 (3.57) 59 13/16" (1519) 63 15/16" (1624) 86 1/2" (2197) 40.07 (3.72) 43.12 (4.01)
AEAHID5480
1
96"
(2438)
89"
(2261)
66 3/4" (1695) 95" (2413)
67 1/4"
(1708) 95 1/2" (2426) 18.58 (1.73)
AEAHID6080 AESLDxx68
2
96" (2438) 87 7/16" (2221) 74 3/4" (1899) 95" (2413) 75 1/4" (1911) 95 1/2" (2426) 42.43 (3.94) 67 13/16" (1722) 71 15/16" (1827) 84 15/16" (2157) 44.83 (4.16) 48.02 (4.46) AESLDxx80
AEAHID6080
1
96"
(2438) 87 7/16" (2221)
74 3/4" (1899) 95" (2413)
75 1/4"
(1911) 95 1/2" (2426) 20.61 (1.91)
AEAHID7080
2
96"
(2438) 84 5/8" (2149)
86 3/4" (2203) 95" (2413)
87 1/4"
(2216) 95 1/2" (2426) 47.94 (4.45) 79 13/16" (2027) 83 15/16" (2132) 82 1/4" (2089) 51.80 (4.81) 55.20 (5.13)
AEAHID7080
1
96"
(2438) 84 5/8" (2149)
86 3/4" (2203) 95" (2413)
87 1/4"
(2216) 95 1/2" (2426) 23.38 (2.17)
AEHIDxx68 AEAHID5468
1 AEHIDxx80 96" (2438)
76"
(1930)
66 3/4" (1695) 82" (2083) 67 1/4" / 3 / AEHIDxx68AP AEHIDxx80AP 76" (1930) 66PA /4" (1695) 82" (2083) PA67 1/4"
20 7/8" 26 7/8"
(530) 22 15/16" (583) 72 7/16" (1840) 12.22 (1.14) 28.07 (2.61) (683) 28 15/16" (735) 74 3/16" (1884) 15.54 (1.44) 34.97 (3.25)
(1708) 82 1/2" (2096) 32.63 (3.03) 59 13/16" (1519) 63 15/16" (1624) 73 1/2" (1867) 34.29 (3.19) 37.09 (3.45) (1708) 82 1/2" (2096) 15.79 (1.47)
28 7/8" 32 7/8" 38 7/8" 20 7/8" 26 7/8" 28 7/8" 32 7/8" 38 7/8"
(733) 30 15/16" (786)
73 1/2" (1867) 16.56 (1.54) 37.09 (3.45)
(835) 34 15/16" (887) 71 15/16" (1827) 18.58 (1.73) 41.27 (3.83) (987) 40 15/16" (1040) 69 1/4" (1759) 21.53 (2.00) 47.36 (4.40) (530) 22 15/16" (583) 85 7/16" (2170) 14.29 (1.33) 32.65 (3.03) (683) 28 15/16" (735) 87 3/16" (2215) 18.15 (1.69) 40.64 (3.78) (733) 30 15/16" (786)
86 1/2" (2197) 19.35 (1.80) 43.12 (4.01)
(835) 34 15/16" (887) 84 15/16" (2157) 21.74 (2.02) 48.02 (4.46) (987) 40 15/16" (1040) 82 1/4" (2089) 25.22 (2.34) 55.20 (5.13)
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters or square meters. *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed.
196 AESLIxx68
AESLIxx80
ENTRY DOORS AESODxx80AP/PA
AESODxx80
AESODxx68
Custom-size doors are available in 1 ⁄ 8" (3) increments.
AEAODxx68
AEAODxx68AP/PA
AEAODxx80
Available in custom designed panels, see page 192. Stationary
AEAODxx80AP/PA
doors are also available (i.e. AEAOD2068S or AEAOD4068SS).
Arch Outswing Entry Door Dimensions and Specifications Number of Panels Radius Open* Inches/(mm)
Door Dimensions Shoulder Height Width Height Inches/(mm) Inches/(mm) Inches/(mm)
Min. Rough Opening Width Inches/(mm)
Height Inches/(mm)
Clear Opening Area Sq. Ft./(m2)
Clear Opening Maximums 90 Width Inches/(mm) °
Full Width Inches/(mm)
Height Inches/(mm)
Vent Area Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
AEAOD2068
1
(665)
82 1/2" (2096) 12.37 (1.15)
21 1/8"
(537) 23 1/16"
(586)
AEAOD2668
1
48"
(1219) 79 5/16" (2015) 31 11/16" (805) 82" (2083) 32 3/16"
(818)
82 1/2" (2096) 15.50 (1.44)
27 1/8"
(689) 29 1/16"
(738) 76 13/16" (1951) 15.82 (1.47) 17.85 (1.66)
37 1/16" (941) 79 11/16" (2024) 25 11/16" (652) 82" (2083) 26 3/16"
77 1/4" (1962) 12.58 (1.17) 14.49 (1.35)
AEAOD2868
1
48"
(1219) 78 15/16" (2005) 33 11/16" (856) 82" (2083) 34 3/16"
(868)
82 1/2" (2096) 16.50 (1.53)
29 1/8"
(740) 31 1/16"
(789)
76 1/2" (1943) 16.89 (1.57) 18.95 (1.76)
AEAOD3068
1
48"
(1219) 78 1/8" (1984) 37 11/16" (957) 82" (2083) 38 3/16"
(970)
82 1/2" (2096) 18.44 (1.71)
33 1/8"
(841) 35 1/16"
(891)
75 3/4" (1924) 19.00 (1.77) 21.13 (1.96)
AEAOD3668
1
48"
39 1/8"
(994) 41 1/16" (1043) 74 3/8" (1889) 22.13 (2.06) 24.36 (2.26)
AEAOD2080
1
(1219) 76 3/4" (1949)AEASLOxx68 43 11/16" (1110) 82" AEASLOxx80 (2083) 44 3/16" (1122) 82 1/2" (2096) 21.21 (1.97) 37 1/16" (941) 92 11/16" (2354) 25 11/16" (652) 95" (2413) 26 3/16" (665) 95 1/2" (2426) 12.37 (1.15)
21 1/8"
(537) 23 1/16"
(586)
AEAOD2680
1
48"
(1219) 92 5/16" (2345) 31 11/16" (805) 95" (2413) 32 3/16"
(818)
95 1/2" (2426) 15.50 (1.44)
27 1/8"
(689) 29 1/16"
(738) 76 13/16" (1951) 18.45 (1.71) 20.71 (1.92)
AEASLDxx68
AEASLDxx80
AEASLIxx68
AEASLIxx80
77 1/4" (1962) 14.66 (1.36) 16.81 (1.56)
AEAOD2880
1
48"
(1219) 91 15/16" (2335) 33 11/16" (856) 95" (2413) 34 3/16"
(868)
95 1/2" (2426) 16.50 (1.53)
29 1/8"
(740) 31 1/16"
(789)
76 1/2" (1943) 19.69 (1.83) 21.99 (2.04)
AEAOD3080
1
48"
(1219) 91 1/8" (2315) 37 11/16" (957) 95" (2413) 38 3/16"
(970)
95 1/2" (2426) 18.44 (1.71)
33 1/8"
(841) 35 1/16"
(891)
75 3/4" (1924) 22.17 (2.06) 24.53 (2.28)
AEAOD3680
1
48"
(1219) 89 3/4" (2280) 43 11/16" (1110) 95" (2413) 44 3/16" (1122) 95 1/2" (2426) 21.21 (1.97)
39 1/8"
(994) 41 1/16" (1043) 74 3/8" (1889) 25.84 (2.40) 28.30 (2.63)
AEAOD4068
2
48"
(1219) 74 3/4" (1899)
50 3/4" (1289) 82" (2083)
51 1/4"
(1302) 82 1/2" (2096) 24.23 (2.25) 44 3/16" (1122) 48 1/8" (1222) 72 1/2" (1842) 25.73 (2.39) 28.07 (2.61)
AEAOD4068
1
48"
(1219) 74 3/4" (1899)
50 3/4" (1289) 82" (2083)
51 1/4"
(1302) 82 1/2" (2096) 11.58 (1.08)
AEAOD5068
2
96"
(2438) 76 3/4" (1949)
62 3/4" (1594) 82" (2083)
63 1/4"
(1607) 82 1/2" (2096) 31.00 (2.88) 56 3/16" (1427) 60 1/8" (1527) 74 1/4" (1886) 32.38 (3.01) 34.97 (3.25)
AEAOD5068
1
96"
(2438) 76 3/4" (1949)
62 3/4" (1594) 82" (2083)
63 1/4"
(1607) 82 1/2" (2096) 14.95 (1.39)
AEAOD5468 AEODxx68
2 AEODxx80 96" (2438)
3/ " (1695) 82" (2083) / 67 1/ " 76"AEODxx68AP (1930) 66/PA AEODxx80AP PA 4 4
(1708) 82 1/2" (2096) 32.76 (3.04) 60 3/16" (1529) 64 1/8" (1629) 73 9/16" (1868) 34.43 (3.20) 37.09 (3.45)
AEAOD5468
1
96"
(2438)
76"
(1930)
66 3/4" (1695) 82" (2083)
67 1/4"
(1708) 82 1/2" (2096) 15.84 (1.47)
AEAOD6068
2
96"
(2438) 74 7/16" (1891)
74 3/4" (1899) 82" (2083)
75 1/4"
(1911) 82 1/2" (2096) 36.06 (3.35) 68 3/16" (1732) 72 1/8" (1832)
72"
(1829) 38.48 (3.57) 41.27 (3.83)
AEAOD6068
1
96"
(2438) 74 7/16" (1891)
74 3/4" (1899) 82" (2083)
75 1/4"
(1911) 82 1/2" (2096) 17.50 (1.63)
72"
(1829) 18.65 (1.73) 41.27 (3.83)
AEAOD7068
2
96"
(2438) 71 5/8" (1819)
86 3/4" (2203) 82" (2083)
87 1/4"
(2216) 82 1/2" (2096) 40.49 (3.76) 80 3/16" (2037) 84 1/8" (2137) 69 5/16" (1761) 44.37 (4.12) 47.36 (4.40)
AEAOD7068
1
96"
(2438) 71 5/8" (1819)
86 3/4" (2203) 82" (2083)
87 1/4"
(2216) 82 1/2" (2096) 19.73 (1.83)
AEAOD4080
2
48"
(1219) 87 3/4" (2229)
50 3/4" (1289) 95" (2413)
51 1/4"
(1302) 95 1/2" (2426) 28.57 (2.65) 44 3/16" (1122) 48 1/8" (1222) 85 1/2" (2172) 30.08 (2.79) 32.65 (3.03)
AEAOD4080
1
48"
(1219) 87 3/4" (2229)
50 3/4" (1289) 95" (2413)
51 1/4"
(1302) 95 1/2" (2426) 13.66 (1.27)
AEAOD5080
2
96"
(2438) 89 3/4" (2280)
62 3/4" (1594) 95" (2413)
63 1/4"
(1607) 95 1/2" (2426) 36.43 (3.38) 56 3/16" (1427) 60 1/8" (1527) 87 1/4" (2216) 37.80 (3.51) 40.64 (3.78)
AEAOD5080
1
96"
(2438) 89 3/4" (2280)
62 3/4" (1594) 95" (2413)
63 1/4"
(1607) 95 1/2" (2426) 17.57 (1.63)
AEAOD5480
2
96"
(2438)
89"
(2261)
66 3/4" (1695) 95" (2413)
67 1/4"
(1708) 95 1/2" (2426) 38.55 (3.58) 60 3/16" (1529) 64 1/8" (1629) 86 9/16" (2199) 40.22 (3.74) 43.12 (4.01)
AEAOD5480
1
96"
(2438)
89"
(2261)
66 3/4" (1695) 95" (2413)
67 1/4"
(1708) 95 1/2" (2426) 18.63 (1.73)
AEAOD6080
2
96"
(2438) 87 7/16" (2221)
74 3/4" (1899) 95" (2413)
75 1/4"
(1911) 95 1/2" (2426) 42.57 (3.95) 68 3/16" (1732) 72 1/8" (1832)
85"
(2159) 44.99 (4.18) 48.02 (4.46)
AEAOD6080
1
96"
(2438) 87 7/16" (2221)
74 3/4" (1899) 95" (2413)
75 1/4"
(1911) 95 1/2" (2426) 20.66 (1.92)
85"
(2159) 21.81 (2.03) 48.02 (4.46)
AEAOD7080
2
96"
(2438) 84 5/8" (2149)
86 3/4" (2203) 95" (2413)
87 1/4"
(2216) 95 1/2" (2426) 48.09 (4.47) 80 3/16" (2037) 84 1/8" (2137) 82 5/16" (2091) 51.96 (4.83) 55.20 (5.13)
AEAOD7080
1
96"
(2438) 84 5/8" (2149)
86 3/4" (2203) 95" (2413)
87 1/4"
(2216) 95 1/2" (2426) 23.44 (2.18)
AESLDxx68
AESLDxx80
21" 27" 29" 33" 39" 21" 27" 29" 33" 39"
(533) (686) (737) (838) (991) (533) (686) (737) (838) (991)
23" 29" 31" 35" 41" 23" 29" 31" 35" 41"
(584) (737)
72 1/2" (1842) 12.28 (1.14) 28.07 (2.61) 74 1/4" (1886) 15.60 (1.45) 34.97 (3.25)
(787) 73 9/16" (1868) 16.63 (1.54) 37.09 (3.45) (889)
(1041) 69 5/16" (1761) 21.60 (2.01) 47.36 (4.40) (584) (737)
85 1/2" (2172) 14.36 (1.33) 32.65 (3.03) 87 1/4" (2216) 18.22 (1.69) 40.64 (3.78)
(787) 86 9/16" (2199) 19.43 (1.81) 43.12 (4.01) (889)
(1041) 82 5/16" (2091) 25.30 (2.35) 55.20 (5.13)
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters or square meters. *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed.
AESLIxx68 AESLOxx68
AESLIxx80 AESLOxx80
Direct-Set and Sash-Set Arch Entry Door Sidelights Direct-set (AEASLD), sash-set inswing (AEASLI) and sash-set outswing (AEASLO) entry door sidelights shown. Contact your Andersen supplier for dimensions and specifications.
AEASLDxx68 AEASLDxx68
AEASLDxx80 AEASLDxx80
AEASLIxx68 AEASLIxx68 AEASLOxx68 AEASLOxx68
AEASLIxx80 AEASLIxx80 AEASLOxx80 AEASLOxx80
197
Entry Doors
Door Number
AESHIDxx80AP/PA
AESHIDxx80
AESHIDxx68
RESIDENTIAL ENTRY DOORS Order Designation Description Viewed from the exterior. AEAHIDxx68
17
AEAHIDxx68AP/PA
AEAHIDxx80
AEHID
3168
Flanking unit width
A
Door rough opg.
AEAHIDxx80AP/PA
L
17
Active Left panel hinged
AEHID
3168
A
R
17
Door Active Right rough opg. panel hinged
Flanking unit width
AEHID
6480
A
P
Door rough opg.
Flanking unit width
Andersen Entry Hinged Inswing Door AEASLDxx68 AEASLDxx80
Andersen Entry Andersen Entry Hinged Inswing Door Hinged Inswing Door AEASLIxx68 AEASLIxx80 AEASLOxx68 AEASLOxx80 Inswing entry doors (AEHID) shown above, for outswing entry doors use AEOD. Outswing entry doors open outward to the exterior.
L
R Right hinged
Passive panel Active panel
Left hinged
Custom-size doors are available in 1 ⁄ 8" (3) increments.
AEHIDxx68
AEHIDxx68AP/PA
AEHIDxx80
Available in custom designed panels, see page 192. Stationary
AEHIDxx80AP/PA
doors are also available (i.e. AEHID2068S or AEHID4068SS).
Rectangular Inswing Entry Door Dimensions and Specifications Door Number
Number of Panels Open*
Min. Rough Opening Width Inches/(mm)
Height Inches/(mm)
Width Inches/(mm)
Clear Opening Maximums
Height Inches/(mm)
Clear Opening Sq. Ft./(m2)
90° Width Inches/(mm)
Full Width Inches/(mm)
Height Inches/(mm)
Vent Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
AEHID2068
1
25 11/16"
(652)
82"
(2083)
26 3/16"
(665)
82 1/2"
(2096)
12.56
(1.17)
20 13/16"
(529)
22 7/8"
(581)
79 1/16"
(2008)
12.56
(1.17)
14.63
(1.36)
AEHID2668
1
31 11/16"
(805)
82"
(2083)
32 3/16"
(818)
82 1/2"
(2096)
15.85
(1.47)
26 13/16"
(681)
28 7/8"
(733)
79 1/16"
(2008)
15.85
(1.47)
18.04
(1.68)
AEHID2868
1
33 11/16"
(856)
82"
(2083)
34 3/16"
(868)
82 1/2"
(2096)
16.95
(1.57)
28 13/16"
(732)
30 7/8"
(784)
79 1/16"
(2008)
16.95
(1.57)
19.18
(1.78)
AEHID3068
1
37 11/16"
(957)
82"
(2083)
38 3/16"
(970)
82 1/2"
(2096)
19.15
(1.78)
32 13/16"
(833)
34 7/8"
(886)
79 1/16"
(2008)
19.15
(1.78)
21.46
(1.99)
AEHID3668
1
43 11/16"
(1110)
82"
(2083)
44 3/16"
(1122)
82 1/2"
(2096)
22.44
(2.08)
38 13/16"
(986)
40 7/8"
(1038)
79 1/16"
(2008)
22.44
(2.08)
24.88
(2.31)
AEHID2080
1
25 11/16"
(652)
95"
(2413)
26 3/16"
(665)
95 1/2"
(2426)
14.62
(1.36)
20 13/16"
(529)
22 7/8"
(581)
92 1/16"
(2338)
14.62
(1.36)
16.95
(1.57)
AEHID2680
1
31 11/16"
(805)
95"
(2413)
32 3/16"
(818)
95 1/2"
(2426)
18.46
(1.71)
26 13/16"
(681)
28 7/8"
(733)
92 1/16"
(2338)
18.46
(1.71)
20.90
(1.94)
AEHID2880
1
33 11/16"
(856)
95"
(2413)
34 3/16"
(868)
95 1/2"
(2426)
19.74
(1.83)
28 13/16"
(732)
30 7/8"
(784)
92 1/16"
(2338)
19.74
(1.83)
22.22
(2.06)
AEHID3080
1
37 11/16"
(957)
95"
(2413)
38 3/16"
(970)
95 1/2"
(2426)
22.30
(2.07)
32 13/16"
(833)
34 7/8"
(886)
92 1/16"
(2338)
22.30
(2.07)
24.86
(2.31)
AEHID3680
1
43 11/16"
(1110)
95"
(2413)
44 3/16"
(1122)
95 1/2"
(2426)
26.13
(2.43)
38 13/16"
(986)
40 7/8"
(1038)
92 1/16"
(2338)
26.13
(2.43)
28.82
(2.68)
AEHID4068
2
50 3/4"
(1289)
82"
(2083)
51 1/4"
(1302)
82 1/2"
(2096)
26.32
(2.45)
43 13/16"
(1113)
47 15/16"
(1218)
79 1/16"
(2008)
26.32
(2.45)
28.90
(2.68)
AEHID4068
1
50 3/4"
(1289)
82"
(2083)
51 1/4"
(1302)
82 1/2"
(2096)
12.59
(1.17)
20 7/8"
(530)
22 15/16"
(583)
79 1/16"
(2008)
12.59
(1.17)
28.90
(2.68)
AEHID5068
2
62 3/4"
(1594)
82"
(2083)
63 1/4"
(1607)
82 1/2"
(2096)
32.91
(3.06)
55 13/16"
(1418)
59 15/16"
(1522)
79 1/16"
(2008)
32.91
(3.06)
35.73
(3.32)
AEHID5068
1
62 3/4"
(1594)
82"
(2083)
63 1/4"
(1607)
82 1/2"
(2096)
15.89
(1.48)
26 7/8"
(683)
28 15/16"
(735)
79 1/16"
(2008)
15.89
(1.48)
35.73
(3.32)
AEHID5468
2
66 3/4"
(1695)
82"
(2083)
67 1/4"
(1708)
82 1/2"
(2096)
35.10
(3.26)
59 13/16"
(1519)
63 15/16"
(1624)
79 1/16"
(2008)
35.10
(3.26)
38.01
(3.53)
AESLIxx68 AEHID5468
1
AESLIxx80 3/ " 66 (1695) 4
82"
(2083)
67 1/4"
(1708)
82 1/2"
(2096)
16.99
(1.58)
28 7/8"
(733)
30 15/16"
(786)
79 1/16"
(2008)
16.99
(1.58)
38.01
(3.53)
AEHID6068
2
74 3/4"
(1899)
82"
(2083)
75 1/4"
(1911)
82 1/2"
(2096)
39.50
(3.67)
67 13/16"
(1722)
71 15/16"
(1827)
79 1/16"
(2008)
39.50
(3.67)
42.57
(3.95)
AEHID6068
1
74 3/4"
(1899)
82"
(2083)
75 1/4"
(1911)
82 1/2"
(2096)
19.18
(1.78)
32 7/8"
(835)
34 15/16"
(887)
79 1/16"
(2008)
19.18
(1.78)
42.57
(3.95)
AEHID7068
2
86 3/4"
(2203)
82"
(2083)
87 1/4"
(2216)
82 1/2"
(2096)
46.09
(4.28)
79 13/16"
(2027)
83 15/16"
(2132)
79 1/16"
(2008)
46.09
(4.28)
49.40
(4.59)
AEHID7068
1
86 3/4"
(2203)
82"
(2083)
87 1/4"
(2216)
82 1/2"
(2096)
22.48
(2.09)
38 7/8"
(987)
40 15/16"
(1040)
79 1/16"
(2008)
22.48
(2.09)
49.40
(4.59)
AEHID4080
2
50 3/4"
(1289)
95"
(2413)
51 1/4"
(1302)
95 1/2"
(2426)
30.65
(2.85)
43 13/16"
(1113)
47 15/16"
(1218)
92 1/16"
(2338)
30.65
(2.85)
33.48
(3.11)
AEHID4080
1
50 3/4"
(1289)
95"
(2413)
51 1/4"
(1302)
95 1/2"
(2426)
14.66
(1.36)
20 7/8"
(530)
22 15/16"
(583)
92 1/16"
(2338)
14.66
(1.36)
33.48
(3.11)
AEHID5080
2
62 3/4"
(1594)
95"
(2413)
63 1/4"
(1607)
95 1/2"
(2426)
38.32
(3.56)
55 13/16"
(1418)
59 15/16"
(1522)
92 1/16"
(2338)
38.32
(3.56)
41.40
(3.85)
AEHID5080
1
62 3/4"
(1594)
95"
(2413)
63 1/4"
(1607)
95 1/2"
(2426)
18.50
(1.72)
26 7/8"
(683)
28 15/16"
(735)
92 1/16"
(2338)
18.50
(1.72)
41.40
(3.85)
AEHID5480
2
66 3/4"
(1695)
95"
(2413)
67 1/4"
(1708)
95 1/2"
(2426)
40.88
(3.80)
59 13/16"
(1519)
63 15/16"
(1624)
92 1/16"
(2338)
40.88
(3.80)
44.04
(4.09)
AEHID5480
1
66 3/4"
(1695)
95"
(2413)
67 1/4"
(1708)
95 1/2"
(2426)
19.78
(1.84)
28 7/8"
(733)
30 15/16"
(786)
92 1/16"
(2338)
19.78
(1.84)
44.04
(4.09)
AEHID6080
2
74 3/4"
(1899)
95"
(2413)
75 1/4"
(1911)
95 1/2"
(2426)
45.99
(4.27)
67 13/16"
(1722)
71 15/16"
(1827)
92 1/16"
(2338)
45.99
(4.27)
49.31
(4.58)
AEHID6080
1
74 3/4"
(1899)
95"
(2413)
75 1/4"
(1911)
95 1/2"
(2426)
22.34
(2.08)
32 7/8"
(835)
34 15/16"
(887)
92 1/16"
(2338)
22.34
(2.08)
49.31
(4.58)
AEHID7080
2
86 3/4"
(2203)
95"
(2413)
87 1/4"
(2216)
95 1/2"
(2426)
53.66
(4.99)
79 13/16"
(2027)
83 15/16"
(2132)
92 1/16"
(2338)
53.66
(4.99)
57.23
(5.32)
AEHID7080
1
86 3/4"
(2203)
95"
(2413)
87 1/4"
(2216)
95 1/2"
(2426)
26.17
(2.43)
38 7/8"
(987)
40 15/16"
(1040)
92 1/16"
(2338)
26.17
(2.43)
57.23
(5.32)
AESLDxx68
AESLOxx68
AESLDxx80
AESLOxx80
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters or square meters. *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed.
198
ENTRY DOORS AEASLDxx68
AEASLDxx80
AEASLIxx68 AEASLOxx68
AEASLIxx80 AEASLOxx80
Custom-size doors are available in 1 ⁄ 8" (3) increments.
AEODxx68
AEODxx68AP/PA
AEODxx80
Available in custom designed panels, see page 192. Stationary
AEODxx80AP/PA
doors are also available (i.e. AEOD2068S or AEOD4068SS).
Rectangular Outswing Entry Door Dimensions and Specifications Min. Rough Opening
Number of Panels Open*
Width Inches/(mm)
Height Inches/(mm)
Width Inches/(mm)
Clear Opening Maximums
Height Inches/(mm)
Clear Opening Sq. Ft./(m2)
90° Width Inches/(mm)
Full Width Inches/(mm)
Height Inches/(mm)
Vent Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
AEOD2068
1
25 11/16"
(652)
82"
(2083)
26 3/16"
(665)
82 1/2"
(2096)
12.68
(1.18)
21 1/8"
(537)
23 1/16"
(586)
79 3/16"
(2011)
12.58
(1.17)
14.63
(1.36)
AEOD2668
1
31 11/16"
(805)
82"
(2083)
32 3/16"
(818)
82 1/2"
(2096)
15.98
(1.48)
27 1/8"
(689)
29 1/16"
(738)
79 3/16"
(2011)
15.82
(1.47)
18.04
(1.68)
AEOD2868
1
33 11/16"
(856)
82"
(2083)
34 3/16"
(868)
82 1/2"
(2096)
17.08
(1.59)
29 1/8"
(740)
31 1/16"
(789)
79 3/16"
(2011)
16.89
(1.57)
19.18
(1.78)
AEOD3068
1
37 11/16"
(957)
82"
(2083)
38 3/16"
(970)
82 1/2"
(2096)
19.28
(1.79)
33 1/8"
(841)
35 1/16"
(891)
79 3/16"
(2011)
19.00
(1.77)
21.46
(1.99)
AEOD3668
1
43 11/16"
(1110)
82"
(2083)
44 3/16"
(1122)
82 1/2"
(2096)
22.58
(2.10)
39 1/8"
(994)
41 1/16"
(1043)
79 3/16"
(2011)
22.13
(2.06)
24.88
(2.31)
AEOD2080
1
25 11/16"
(652)
95"
(2413)
26 3/16"
(665)
95 1/2"
(2426)
14.76
(1.37)
21 1/8"
(537)
23 1/16"
(586)
92 3/16"
(2342)
14.66
(1.36)
16.95
(1.57)
AESLDxx68
AESLDxx80
AEOD2680
1
31 11/16"
(805)
95"
(2413)
32 3/16"
(818)
95 1/2"
(2426)
18.61
(1.73)
27 1/8"
(689)
29 1/16"
(738)
92 3/16"
(2342)
18.45
(1.71)
20.90
(1.94)
AEOD2880
1
33 11/16"
(856)
95"
(2413)
34 3/16"
(868)
95 1/2"
(2426)
19.89
(1.85)
29 1/8"
(740)
31 1/16"
(789)
92 3/16"
(2342)
19.69
(1.83)
22.22
(2.06)
AEOD3080
1
37 11/16"
(957)
95"
(2413)
38 3/16"
(970)
95 1/2"
(2426)
22.45
(2.09)
33 1/8"
(841)
35 1/16"
(891)
92 3/16"
(2342)
22.17
(2.06)
24.86
(2.31)
AEOD3680
1
43 11/16"
(1110)
95"
(2413)
44 3/16"
(1122)
95 1/2"
(2426)
26.29
(2.44)
39 1/8"
(994)
41 1/16"
(1043)
92 3/16"
(2342)
25.84
(2.40)
28.82
(2.68)
AEOD4068
2
50 3/4"
(1289)
82"
(2083)
51 1/4"
(1302)
82 1/2"
(2096)
26.46
(2.46)
44 3/16"
(1122)
48 1/8"
(1222)
79 3/16"
(2011)
25.73
(2.39)
28.90
(2.68)
AEOD4068
1
50 3/4"
(1289)
82"
(2083)
51 1/4"
(1302)
82 1/2"
(2096)
12.65
(1.18)
21"
(533)
23"
(584)
79 3/16"
(2011)
12.28
(1.14)
28.90
(2.68)
AEOD5068
2
62 3/4"
(1594)
82"
(2083)
63 1/4"
(1607)
82 1/2"
(2096)
33.06
(3.07)
56 3/16"
(1427)
60 1/8"
(1527)
79 3/16"
(2011)
32.38
(3.01)
35.73
(3.32)
AEASLDxx68
AEASLDxx80
AEOD5068
1
62 3/4"
(1594)
82"
(2083)
63 1/4"
(1607)
82 1/2"
(2096)
15.95
(1.48)
27"
(686)
29"
(737)
79 3/16"
(2011)
15.60
(1.45)
35.73
(3.32)
AEOD5468
2
66 3/4"
(1695)
82"
(2083)
67 1/4"
(1708)
82 1/2"
(2096)
35.26
(3.28)
60 3/16"
(1529)
64 1/8"
(1629)
79 3/16"
(2011)
34.43
(3.20)
38.01
(3.53)
AESLIxx68 1 AEOD5468
3/ " 66AESLIxx80 (1695) 4
82"
(2083)
67 1/4"
(1708)
82 1/2"
(2096)
17.05
(1.58)
29"
(737)
31"
(787)
79 3/16"
(2011)
16.63
(1.54)
38.01
(3.53)
AEOD6068
74 3/4"
82"
(2083)
75 1/4"
(1911)
82 1/2"
(2096)
39.66
(3.68)
68 3/16"
(1732)
72 1/8"
(1832)
79 3/16"
(2011)
38.48
(3.57)
42.57
(3.95)
AESLOxx68
2
AESLOxx80
(1899)
AEOD6068
1
74 3/4"
(1899)
82"
(2083)
75 1/4"
(1911)
82 1/2"
(2096)
19.25
(1.79)
33"
(838)
35"
(889)
79 3/16"
(2011)
18.65
(1.73)
42.57
(3.95)
AEOD7068
2
86 3/4"
(2203)
82"
(2083)
87 1/4"
(2216)
82 1/2"
(2096)
46.26
(4.30)
80 3/16"
(2037)
84 1/8"
(2137)
79 3/16"
(2011)
44.37
(4.12)
49.40
(4.59)
AEOD7068
1
86 3/4"
(2203)
82"
(2083)
87 1/4"
(2216)
82 1/2"
(2096)
22.55
(2.09)
39"
(991)
41"
(1041)
79 3/16"
(2011)
21.60
(2.01)
49.40
(4.59)
AEOD4080
2
50 3/4"
(1289)
95"
(2413)
51 1/4"
(1302)
95 1/2"
(2426)
30.81
(2.86)
44 3/16"
(1122)
48 1/8"
(1222)
92 3/16"
(2342)
30.08
(2.79)
33.48
(3.11)
21"
(533)
23"
(584)
92 3/16"
(2342)
14.36
(1.33)
33.48
(3.11)
AEOD4080
1
50 3/4"
(1289)
95"
(2413)
51 1/4"
(1302)
95 1/2"
(2426)
14.72
(1.37)
AEOD5080
2
62 3/4"
(1594)
95"
(2413)
63 1/4"
(1607)
95 1/2"
(2426)
38.49
(3.58)
AEOD5080
1
62 3/4"
(1594)
95"
(2413)
63 1/4"
(1607)
95 1/2"
(2426)
18.57
(1.73)
27"
(686)
AEOD5480
2
66 /4"
(1695)
95"
(2413)
67 /4"
(1708)
95 /2"
(2426)
41.05
(3.81)
60 /16"
(1529)
3
1
1
56 3/16AEASLDxx68 " (1427) 60 1/8" 3
AEASLDxx80 (1527) 92 3/16"
(2342) AEASLIxx68 37.80 (3.51)
AEASLIxx80 41.40 (3.85)
29"
(737)
92 3/16"
(2342)
64 /8"
(1629)
92 /16"
(2342)
1
3
AEASLOxx68
AEASLOxx80
18.22
(1.69)
41.40
(3.85)
40.22
(3.74)
44.04
(4.09)
AEOD5480
1
66 3/4"
(1695)
95"
(2413)
67 1/4"
(1708)
95 1/2"
(2426)
19.85
(1.84)
29"
(737)
31"
(787)
92 3/16"
(2342)
19.43
(1.81)
44.04
(4.09)
AEOD6080
2
74 3/4"
(1899)
95"
(2413)
75 1/4"
(1911)
95 1/2"
(2426)
46.17
(4.29)
68 3/16"
(1732)
72 1/8"
(1832)
92 3/16"
(2342)
44.99
(4.18)
49.31
(4.58)
AEOD6080
1
74 3/4"
(1899)
95"
(2413)
75 1/4"
(1911)
95 1/2"
(2426)
22.41
(2.08)
33"
(838)
35"
(889)
92 3/16"
(2342)
21.81
(2.03)
49.31
(4.58)
AEOD7080
2
86 3/4"
(2203)
95"
(2413)
87 1/4"
(2216)
95 1/2"
(2426)
53.86
(5.00)
80 3/16"
(2037)
84 1/8"
(2137)
92 3/16"
(2342)
51.96
(4.83)
57.23
(5.32)
AEOD7080
1
86 3/4"
(2203)
95"
(2413)
87 1/4"
(2216)
95 1/2"
(2426)
26.25
(2.44)
39
(991)
41"
(1041)
92 3/16"
(2342)
25.30
(2.35)
57.23
(5.32)
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters or square meters. *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed.
AESLDxx68
Direct-Set Rectangular Entry Door Sidelight Dimensions and Specifications Sidelight Dimensions
Min. Rough Opening Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Overall Sidelight Area Sq. Ft./(m2)
AESLD0868
9 15/16"
(252)
82"
(2083) 16 7/16" (418)
82 1/2" (2096)
3.77 (0.35)
5.66 (0.53)
AESLD1068
15 15/16" (405)
82"
(2083) 16 7/16" (418)
82 1/2" (2096)
7.03 (0.65)
9.08 (0.84)
AESLD2068
25 11/16" (652)
82"
(2083) 26 3/16" (665)
82 1/2" (2096) 12.32 (1.14)
14.63 (1.36)
AESLD3068
37 11/16" (957)
82"
(2083) 38 3/16" (970)
82 1/2" (2096) 18.84 (1.75)
21.46 (1.99)
AESLD0880
9 15/16"
(252)
95"
(2413) 10 7/16" (265)
95 1/2" (2426)
4.40 (0.41)
6.56 (0.61)
AESLD1080
15 15/16" (405)
95"
(2413) 16 7/16" (418)
95 1/2" (2426)
8.19 (0.76)
10.51 (0.98)
AESLD2080
25 11/16" (652)
95"
(2413) 26 3/16" (665)
95 1/2" (2426) 14.37 (1.33)
16.95 (1.57)
AESLD3080
37 11/16" (957)
95"
(2413) 38 3/16" (970)
95 1/2" (2426) 21.97 (2.04)
24.86 (2.31)
Sidelight Number
Width Inches/(mm)
Height Inches/(mm)
Width Inches/(mm)
• Sidelight Dimension always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters or square meters.
AESLDxx80
Direct-Set & Sash-Set Rectangular Entry Door Sidelights
AESLDxx68
AESLDxx80
AESLIxx68 AESLOxx68
AESLIxx80 AESLOxx80
Direct-set (AESLD), sash-set inswing (AESLI) and sash-set outswing (AESLO) entry door sidelights shown. Dimensions and specifications shown for direct-set sidelights, contact your Andersen supplier for sash-set sidelight dimensions and specifications. 199 AESLIxx68
AESLIxx80
Entry Doors
Door Number
AEA AEA
ARCH RECT INSWING 6
ARCH RECT INSWING 4
RESIDENTIAL ENTRY DOORS Arch and Rectangular Inswing Entry Door Details — 4 9 ⁄ 16" (116) and 6 9 ⁄ 16" (167) Jamb Depth Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
4 9 ⁄ 16" (116) 1 5 ⁄ 16" ⁄ 16" (116) Jamb Depth1 5 ⁄ 16" 4 9(33) (33) Jamb Depth 4 9 ⁄ 16" (116) Jamb Depth
(186)
Unobstr. 7 5 ⁄ 16" Glass
7 5 ⁄ 16" (186) 1 1 ⁄ 2" (38)
11 11 ⁄ 16" Unobstr. (297) Glass
Unobstr. Glass
11 11 ⁄ 16" (297)
1 1 ⁄ 2" (38)
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
Dimension from Dimension top of sill from to top of sill to subfloor will subfloor will vary based on vary based on thickness of sill thickness of sill flashing. Dimension from flashing. top of sill 1 1to⁄ 2" subfloor1(38) ⁄ 2" 1 will vary based on (38) thickness of sill flashing.
11 11 ⁄ 16" (297)
top of sill 1 1to⁄ 2" subfloor(38) will vary based on thickness of sill flashing.
Unit Dimension Height
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
Unit Dimension Height Unit Dimension Height
7 5 ⁄ 16" (186) 1 1 ⁄ 2" (38)
Dimension from top of sill to subfloor will vary based on thickness of sill flashing. Dimension from
Rough Opening Height
(186)
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33)
Unobstr. 7 5 ⁄ 16" Glass
11 11 ⁄ 16" Unobstr. (297) Glass 11 11 ⁄ 16" (297)
Unit Dimension Height Unit Dimension Height
7 5 ⁄ 16" (186) Unobstr.
Rough Opening Height Glass (297) Rough Opening Height
Unit Dimension Height
4 9 ⁄ 16" (116) 1 5 ⁄ 16" (33) 6 9 ⁄ 16Jamb " (167) Depth Jamb Depth
1 5 ⁄ 16" (33)
ARCH_RECT OUTSWING 4
1 1 ⁄ 2" (38)
Vertical Section
Vertical Section
Arch
Rectangular
Unit Dimension Width Rough Opening Width
(10)
(10)
3 ⁄ 8" (10)
6 7 ⁄ 16" (164)
Unobstr. Glass
Unobstr. Glass
12 1 ⁄4" (311) Unit Dimension Width Rough Opening Width 12 1 ⁄4" (311) Unit Dimension Width Horizontal Section Two-Panel
Rough Opening Width
1 5 ⁄ 16" (33)
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
4 9 ⁄ 16" (116) Jamb Depth
3 ⁄ 8" 3 (10) ⁄ 8"
6 7 ⁄ 16" (164)
Unit Dimension Width 3 ⁄ 8" (10) Rough Opening Width
3 ⁄ 8" (10)
6 7 ⁄ 16"6 7 ⁄ 16" (164)(164)
Un3 ( Ro
3 ⁄ 8" (10)
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
6 7 ⁄ 16" 1 1 ⁄ 2" (38) 12 4""(311) 6 71⁄ ⁄16 (164) 6 7 ⁄ 16" Unobstr. Unobstr. 3 ⁄ 8" Glass Glass (164) (10) (164) 3 ⁄ 8" 3 ⁄ 8" Unit Dimension Width (10) (10) Rough Opening Width 6 7 ⁄ 16" Unobstr. Glass (164) 3 ⁄ 8" (10)
Unobstr. Glass
1 5 ⁄ 16" (33)
6 7 ⁄ 16" (164)
1 5 ⁄ 16" (33)
3 ⁄ 8"
Unobstr. Glass
5 ⁄ 16" 4 9 ⁄ 16" (116) " (116) 419 ⁄ 16 (33) Jamb Depth Jamb Depth
Horizontal Section
(10) 6 7 ⁄ 16" (164)
Unobstr. Glass
• 4 9/16" (116) and 6 9/16" (167) jamb depth measurements are from backside of installation flange. • Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters. • Clad details shown, wood also available.
Unobstr Glass
4 9 ⁄ 16" (116) Jamb Depth
Unobstr. Glass
6 9 ⁄ 16" (167) Jamb Depth
3 ⁄ 8" (10)
Rough Opening Width
6 7 ⁄ 16" (164)
1 5 ⁄ 16" (33)
1 5 ⁄ 16" (33)
6 7 ⁄ 16" (164)
3 ⁄ 8"
7 5 ⁄ 16" (186)
(10)
3 ⁄ 8" (10)
Unit Dimension Width
6 7 ⁄ 16" (164)
4 9 ⁄ 16" (116) Jamb Depth
Unobstr. Glass
3 ⁄ 8"
Unobstr. Glass
11 15 ⁄ 16" (303)
6 7 ⁄ 16" (164)
Unit Dimension Height
6 7 ⁄ 16" (164)
1 5 ⁄ 16" (33)
Rough Opening Height
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
5 16" 4 9 ⁄ 16" (116) " (116) 419 ⁄⁄16 (33) Jamb Depth Jamb Depth
Arch and Rectangular Inswing Entry Door Details — 4 9 ⁄ 16" (116) Jamb Depth
6 9 ⁄ 16" (167) Jamb Depth
(38)
ing Width
200 33)
5 ⁄ 16"
ening Width
4 9 ⁄ 16" (116) Jamb Depth
1 1 ⁄ 2"
ion Width
7 ⁄ 16" "6(311) (164) nsion Width
11 11 ⁄ 16"
Rough Opening Height
str. s
1 5 ⁄ 16" (33)
7 5 ⁄ 16" (186)
1 5 ⁄ 16" (33)
6 9 ⁄ 16" (167) Jamb Depth
Rough Opening Height Rough Opening Height
1 5 ⁄ 16" (33)
6 7 ⁄ 16" (164)
Unobstr. Glass
thickness of sill flashing.
thickness of sill flashing.
1 1 ⁄ 2" (38)
ENTRY DOORS
1 1 ⁄ 2" (38)
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 4 9 ⁄ 16" (116) Jamb Depth
6 9 ⁄ 16" (167) Jamb Depth
1 5 ⁄ 16" (33)
6 7 ⁄ 16" (164)
1 5 ⁄ 16" (33)
Unobstr.Width 6 7 ⁄ 16"Rough Opening Glass (164) Unit Dimension Width
6 7 ⁄ 16" (164)
3 ⁄ 8" (10)
3 ⁄ 8" (10)
Unobstr. Glass
Rough Opening Width
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
3 ⁄ 8"
1 1 ⁄ 2" 6 7 ⁄ 16" (38) (164)
Unobstr. Glass
1 5 ⁄ 16" (33)
(10) 6 7 ⁄ 16" 3 ⁄ 8"
(164)
Unobstr. Glass
(10)
Entry Doors
6 9 ⁄ 16" (167) 1 5 ⁄ 16" 6 9 ⁄ 16" (167) Jamb Depth (33) Jamb Depth
Horizontal Section
11 11 ⁄ 16" (297)
Unit Dimension Height
3 ⁄ 8" (10)
Rough Opening Height
6 7 ⁄ 16" (164)
Unobstr. Glass
Unit Dimension Width
3 ⁄ 8" (10)
7 5 ⁄ 16" (186)
1 5 ⁄ 16" (33)
6 9 ⁄ 16" (167) 1 5 ⁄ 16" 6 9 ⁄ 16" (167) Jamb Depth (33) Jamb Depth
Arch and Rectangular Inswing Entry Door Details — 6 9 ⁄ 16" (167) Jamb Depth
111 ⁄ 2" ⁄4" (311) 12(38) Unit Dimension Width
Unobstr.
6 7 ⁄ 16"
Glass (164) ARCH_RECT OUTSWING 43 ⁄ 8"
(10)
Rough Opening Width 12 1 ⁄4" (311)
Unobstr. Glass
Unit Dimension Width Horizontal Section Two-Panel Rough Opening Width
6 7 ⁄ 16" (164)
3 ⁄ 8" (10)
Arch and Rectangular Outswing Entry Door Details Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
6 7 ⁄ 16" (164)
7 ⁄ 16" 2 1 ⁄4"6(311) (164) imension Width
Opening Width
3 ⁄ 8" (10)
Unobstr. Glass
6 7 ⁄ 16" (164)
7 5 ⁄ 16" (186) Unobstr. Glass
11 15 ⁄ 16" (303)
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
Unit Dimension Height
Rough Opening Height
Unit Dimension Height
Rough Opening Height
pening Width
7 5 ⁄ 16" (186)
3 ⁄ 8" (10)
Unobstr. Glass
ension Width
11 15 ⁄ 16" (303)
nobstr. Glass
Dimension from top of sill to subfloor will vary based on thickness of sill flashing.
1 1 ⁄ 2" (38)
1 1 ⁄ 2" (38)
3 ⁄ 8" (10)
Vertical Section
Vertical Section
Arch
Rectangular
6 7 ⁄ 16" (164)
⁄ 16" 33)
4 9 ⁄ 16" (116) Jamb Depth
• 4 9/16" (116) and 6 9/16" (167) jamb depth measurement is from backside of installation flange. • Light-colored areas are parts included with window and/or door. Dark-colored areas are additional Andersen® parts required to complete window and/or door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters. • Clad details shown, wood also available.
6 7 ⁄ 16" (164)
201 Unobstr. Glass
6 7 ⁄ 16" (164)
1 1 ⁄ 2" (38)
1 1 ⁄ 2" (38)
RESIDENTIAL ENTRY DOORS
Unit Dimension Height
Unit Dimension Height
4 9 ⁄ 16" (116) 1 5 ⁄ 16" 9 ⁄ 16" (116) 4(33) Jamb Depth Jamb Depth
(10)
Rough Opening Height
3 ⁄ 8"
Rough Opening Height
1 5 ⁄ 16" (33)
Unobstr.Width 6 7 ⁄ 16"Rough Opening Glass (164) Unit Dimension Width
Rough Opening Width Horizontal Section
3 ⁄ 8" 1 1 ⁄ 2" (10) 6 7 ⁄ 16" (38)
1 5 ⁄ 16" (33)
3 ⁄ 8" (10)
3 ⁄ 8" (10)
12 1 ⁄4" (311)
Unobstr. Glass
6 7 ⁄ 16" (164)
3 ⁄ 8" (10)
2 5 ⁄ 16" (59) 6 7 ⁄ 16" (164)
Unobstr. Glass
Unit Dimension Width Rough Opening Width 12 1 ⁄4" (311)
Unobstr. Glass
4 9 ⁄ 16" (116) Jamb Depth
1 1 ⁄ 2" (38)
2 5 ⁄ 16" (59) 6 7 ⁄ 16" (164)
4 9 ⁄ 16" (116) 1 5 ⁄ 16" (33) Jamb Depth
(164) Unobstructed Glass Height
3 ⁄ 8" (10)
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
4 9 ⁄ 16" (116) 1 5 ⁄ 16" Jamb Depth 7 (33) Unobstr. 6 7 ⁄ 16" 6 ⁄ 16" Glass (164) (164) Unit Dimension Width 1 5 ⁄ 16" (33)
Unobstructed Glass Height
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
4 9 ⁄ 16" (116) 1 59⁄ 16" ⁄ 16" (116) Jamb Depth 4(33) Jamb Depth
Arch and Rectangular Outswing Entry Door Details
6 7 ⁄ 16" (164)
Unobstr. Glass
Unit Dimension Width Horizontal Section Two-Panel
Rough Opening Width
3 ⁄ 8" (10)
3 ⁄ 8" (10)
Arch and Rectangular Entry Door Sidelight Details 1 5 ⁄ 16" (33)
1 1 ⁄4" (32)
1 1 ⁄4" (32)
2 1 ⁄ 2" (64)
2 1 ⁄ 2" (64)
11 11 ⁄ 16" (297)
11 11 ⁄ 16" (297) Vertical Section
Vertical Section
Vertical Section
Vertical Section
Direct-Set Arch
Direct-Set Rectangular
Sash-Set Arch
Sash-Set Rectangular
• 4 9/16" (116) jamb depth measurement is from backside of installation flange. • Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters. • Clad details shown, wood also available.
202 1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) 1 5 ⁄ 16" (33) Jamb Depth
7 5 ⁄ 16" (186)
7 5 ⁄ 16" (186)
Unit Dimension Height
2 5 ⁄ 16" (59)
Rough Opening Height
2 5 ⁄ 16" (59)
Unobstr. Glass
1 1 ⁄ 2" (38)
Unit Dimension Height
1 1 ⁄ 2" (38)
4 9 ⁄ 16" (116) Jamb Depth
4 9 ⁄ 16" (116) 1 5 ⁄ 16" (33) Jamb Depth
Rough Opening Height
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
Unobstructed Glass Height
Rough Opening Height
Unobstructed Glass Height
Unit Dimension Height
4 9 ⁄ 16" (116) 1 5 ⁄ 16" (33) Jamb Depth
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
4 9 ⁄ 16" (116) 1 5 ⁄ 16" (33) Jamb Depth
1 5 ⁄ 16" (33)
Unobstr. Glass
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
4 9 ⁄ 16" (116) 1 5 ⁄ 16" (33) Jamb Depth
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) 1 5 ⁄ 16" (33) Jamb Depth
4 9 ⁄ 16" (116) Jamb Depth
4 9 ⁄ 16" (116) Jamb Depth
ENTRY DOORS
Vertical Joining Details – Jamb to Jamb Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
1 15 ⁄158"⁄ 851(41) "⁄ 85(41) " (41) "⁄ 8(41) 1 15 ⁄158"⁄ 851(41) "⁄ 85(41) " (41) "⁄ 8(41)
1 15 ⁄158"⁄ 851(41) "⁄ 85(41) " (41) "⁄ 8(41)
1 15 ⁄158"⁄ 851(41) "⁄ 85(41) " (41) "⁄ 8(41)
Non-reinforced jamb to jamb and 1 ⁄ 2" (13) wide wood joining shown. 1" (25) and 2"
Inswing Entry Door to Direct-Set Arch or Rectangular Sidelight 4 9 ⁄ 16" (116) Jamb Depth
Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Unit Dim. Unit Unit ⁄158Dim. 15Dim. "(41) (41) 1Dim. "⁄ 8510" ⁄ 850" "⁄ 8(41) " (41) 0" 0" Inswing Entry Door to Sash-Set Arch or Rectangular Sidelight 4 9 ⁄ 16" (116) Jamb Depth
2 21 ⁄218"⁄ 812(54) "⁄ 81(54) " (54) "⁄ 8(54)
2 21 ⁄218"⁄ 812(54) "⁄ 81(54) " (54) "⁄ 8(54)
Unit Dim. Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim.Unit 0"0"0"0"
Unit Dim. Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim.Unit 0"0"0"0" ⁄ 85"⁄ 8(41) 1 5 ⁄18"51(41) " (41)
Vertical 51(41) ⁄ 85"⁄ 8(41) 1 5 ⁄18"Joining " (41) Details – Wood
1 15 ⁄158"⁄ 851"(41) ⁄ 85(41) "⁄ 8(41) " (41) Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. 0"0"0"0" Inswing Entry Door to Sash-Set Arch or Rectangular Sidelight 21 ⁄218"⁄ 812(54) "⁄ 81(54) " (54) "⁄ 8(54) Jamb Depth 6 9 ⁄ 16"2(167)
(51) wide joining also Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Unit Dim. Unit Unit ⁄158Dim. 15Dim. "(41) (41) 1Dim. "⁄ 8510" ⁄ 850" "⁄ 8(41) " (41) 0" 0" Outswing Entry Door to Sash-Set Arch or Rectangular Sidelight 4 9 ⁄ 16" (116) Jamb Depth
5 ⁄1 Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Unit Dim. ⁄ 8(41) ⁄Unit 1Dim. 8"51(41) " Dim. (41) 85"Unit 0"0"0"0"
Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Unit Dim. Unit Unit 18Dim. 1 ⁄2 21Dim. 2Dim. "⁄ 81"(54) ⁄ 81(54) "⁄ 8(54) " (54) ⁄ 12"⁄ 212(13) "⁄ 21(13) " (13) "⁄ 2(13)
2 21 ⁄218"⁄ 812"(54) ⁄ 81(54) "⁄ 8(54) " (54) Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim.Unit Unit Dim. Unit Dim. 1 ⁄ 12"⁄ 21(13) "⁄ 21(13) " (13) "⁄ 2(13)
Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Unit Dim. Unit Unit ⁄ 18Dim. 211Dim. 2Dim. "⁄ 81"(54) ⁄ 81(54) "⁄ 8(54) " (54) ⁄212"⁄ 212(13) "⁄ 21(13) " (13) "⁄ 2(13)
Dim. Unit Dim. Dim. UnitUnit Dim. Unit Dim.UnitUnit Dim. 2 23 ⁄238"⁄0" ⁄ 8(60) 832(60) "⁄ 83(60) "0"(60) "0"
Dim. Unit Dim. Dim. UnitUnit Dim. Unit Dim.UnitUnit Dim. 2 23 ⁄238"⁄0" ⁄ 8(60) 832(60) "⁄ 83(60) "0"(60) "0"
2 23 ⁄238"⁄ 832(60) "⁄ 83(60) " (60) "⁄ 8(60) UnitUnit Dim. Unit Dim. UnitUnit Dim. Dim. Unit Dim. Dim. 0" 0"0"
Dim. Unit Dim. Dim. UnitUnit Dim. Unit Dim.UnitUnit Dim. 2 23 ⁄238"⁄0" ⁄ 8(60) 832(60) "⁄ 83(60) "0"(60) "0"
Dim. Unit Dim. Dim. UnitUnit Dim. Unit Dim.UnitUnit Dim.
1 ⁄ 2"1Joining ⁄ 21"⁄ 2(13) (13) " (13) Details – LVL Vertical
Dim. Unit Dim. Dim. UnitUnit Dim. Unit Dim.UnitUnit Dim. 1 ⁄ 2"1(13) ⁄ 21"⁄ 2(13) " (13)
additional joining information.
Unit Dim. Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim.Unit 0"0"0"0" ⁄ 85"⁄ 8(41) 1 5 ⁄18"51(41) " (41)
Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Unit Dim. Unit Unit Dim. 18Dim. 1 2Dim. "⁄ 812"(54) ⁄ 81(54) "⁄ 8(54) " (54) 12⁄ 12⁄2 "⁄ 21(13) "⁄ 21(13) " (13) "⁄ 2(13)
Unit Dim. Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim.Unit 1 ⁄ 12"⁄ 21"(13) ⁄ 21(13) "⁄ 2(13) " (13) 1 1 1 ⁄ 8"⁄ 8(54) 2 ⁄28"2(54) " (54) Inswing Entry Door to Sash-Set Arch or Rectangular Sidelight 4 9 ⁄ 16" (116) Jamb Depth Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Unit Dim. Unit Dim. Unit 3 3 ⁄2 23Dim. 2Dim. 8"⁄ 83"(60) ⁄ 83(60) "⁄ 8(60) " (60) ⁄43"⁄432(19) "⁄43(19) " (19) "⁄4(19)
Andersen supplier for
2 21 ⁄218"⁄ 812(54) "⁄ 81(54) " (54) "⁄ 8(54)
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Unit Dim. Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim.Unit 1 ⁄ 12"⁄ 21"(13) ⁄ 21(13) "⁄ 2(13) " (13) 1 1 1 ⁄ 8"⁄ 8(54) 2 ⁄28"2(54) " (54) Inswing Entry Door to Direct-Set Arch or Rectangular Sidelight 4 9 ⁄ 16" (116) Jamb Depth Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Unit Dim. Unit Dim. Unit 3 3 ⁄2 23Dim. 2Dim. 8"⁄ 83"(60) ⁄ 83(60) "⁄ 8(60) " (60) ⁄43"⁄432(19) "⁄43(19) " (19) "⁄4(19)
available. Contact your
1 ⁄2 Dim. Dim. Unit Dim. Unit Dim. Dim. Unit Dim. Unit Unit ⁄ 81Unit 2Dim. 8Dim. "12(54) "Unit (54) "⁄ 8Unit (54) 1 ⁄ 12"⁄ 21"(13) ⁄ 21(13) "⁄ 2(13) " (13)
Inswing Entry Door to Sash-Set Arch or Rectangular Sidelight 23 ⁄238"⁄ 832"(60) ⁄ 83(60) ⁄ 8(60) "Jamb " (60) Depth 6 9 ⁄ 16"2(167) Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim.Unit Unit Dim. Unit Dim. 3 ⁄43"⁄43(19) "⁄43(19) " (19) "⁄4(19)
Dim. Unit Dim. UnitUnit Dim. Dim. Unit Dim.UnitUnit Dim. 1 ⁄ 2"1(13) ⁄ 21"⁄ 2(13) " (13)
Entry Doors
Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Unit Dim. Unit Unit ⁄158Dim. 15Dim. "(41) (41) 1Dim. "⁄ 8510" ⁄ 850" "⁄ 8(41) " (41) 0" 0"
Unit Dim. Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim.Unit 1 ⁄ 12"⁄ 21"(13) ⁄ 21(13) "⁄ 2(13) " (13) 1 1 1 ⁄ 8"⁄ 8(54) 2 ⁄28"2(54) " (54) Outswing Entry Door to Sash-Set Arch or Rectangular Sidelight 4 9 ⁄ 16" (116) Jamb Depth Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Unit Dim. Unit Dim. Unit 3 3 ⁄2 23Dim. 2Dim. 8"⁄ 83"(60) ⁄ 83(60) "⁄ 8(60) " (60) ⁄43"⁄432(19) "⁄43(19) " (19) "⁄4(19)
Dim. Unit Dim. Dim. UnitUnit Dim. Unit Dim.UnitUnit Dim. 1 ⁄ 2"1(13) ⁄ 21"⁄ 2(13) " (13)
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 Unit Dim. Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim.Unit 3 ⁄43"⁄43"(19) ⁄43(19) "⁄4(19) " (19) 3 3 3 ⁄ 8"⁄ 8(60) 2 ⁄28"2(60) " (60)
Unit Dim. Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim.Unit 3 ⁄43"⁄43"(19) ⁄43(19) "⁄4(19) " (19) 3 3 3 ⁄ 8"⁄ 8(60) 2 ⁄28"2(60) " (60)
Dim. Unit Dim. Dim. UnitUnit Dim. Unit Dim.UnitUnit Dim. 3 ⁄4"3(19) ⁄43"⁄4(19) " (19)
Dim. Unit Dim. Dim. UnitUnit Dim. Unit Dim.UnitUnit Dim. 3 ⁄4"3(19) ⁄43"⁄4(19) " (19)
Inswing Entry Door to Direct-Set Arch or Rectangular Sidelight 4 9 ⁄ 16" (116) Jamb Depth
Inswing Entry Door to Sash-Set Arch or Rectangular Sidelight 4 9 ⁄ 16" (116) Jamb Depth
3 ⁄2 3"⁄Unit Dim. Dim. Unit Dim. Unit Dim. ⁄ 8Unit 2Dim. 8Dim. "32(60) Dim. Unit Dim. 8(60) "Unit (60) Unit Unit 3 ⁄43"⁄43"(19) ⁄43(19) "⁄4(19) " (19)
Dim. Unit Dim. UnitUnit Dim. Dim. Unit Dim.UnitUnit Dim. 3 ⁄4"3(19) ⁄43"⁄4(19) " (19) Inswing Entry Door to Sash-Set Arch or Rectangular Sidelight 6 9 ⁄ 16" (167) Jamb Depth
Unit Dim. Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim. Unit Dim.Unit 3 ⁄43"⁄43"(19) ⁄43(19) "⁄4(19) " (19) 3 3 3 ⁄ 8"⁄ 8(60) 2 ⁄28"2(60) " (60)
Dim. Unit Dim. Dim. UnitUnit Dim. Unit Dim.UnitUnit Dim. 3 ⁄4"3(19) ⁄43"⁄4(19) " (19) Outswing Entry Door to Sash-Set Arch or Rectangular Sidelight 4 9 ⁄ 16" (116) Jamb Depth
• 4 9/16" (116) jamb depth measurement is from backside of installation flange. • Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. • Dimensions in parentheses are in millimeters. • Clad details shown, wood also available.
203
ENTRY DOOR TRANSOMS FEATURES Transoms are sized to fit over Andersen® residential and commercial entry doors and other Andersen products. They are also available in custom sizes. Contact your Andersen supplier for details.
Direct-Set
Sash-Set
Rectangle
Frame Thick aluminum cladding finish. Standard cladding finish meets AAMA 2604. An optional finish that meets the AAMA 2605 standard is available.
Arch
4 9⁄16" (116) jamb depth for 2 x 4 wall construction. All shapes are available direct-set. Rectangle, arch and half circle are also available sash-set to match door stiles.
Half Circle
Andersen entry doors and entry door transoms may be combined using joining materials or can be installed in separate rough openings for a joined appearance. They may also be combined with other units. Contact your Andersen supplier for more information.
Shapes Available in a wide variety of shapes including rectangle, arch, half circle, elliptical and Springline™ windows. See page 192 for exterior colors, interior wood species, glass and other options.
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Overall Sidelight Area Sq. Ft./(m2)
AETD0812
9 15/16"
(252) 12 13/16" (325) 10 7/16" (265) 13 5/16" (338)
0.47 (0.04)
0.88 (0.08)
Width Inches/(mm)
Height Inches/(mm)
Width Inches/(mm)
AETD1012
15 15/16" (405) 12 13/16" (325) 16 7/16" (418) 13 5/16" (338)
0.88 (0.08)
1.42 (0.13)
AETD2012
25 11/16" (652) 12 13/16" (325) 26 3/16" (665) 13 5/16" (338)
1.55 (0.14)
2.29 (0.21)
AETD2612
31 11/16" (805) 12 13/16" (325) 32 3/16" (818) 13 5/16" (338)
1.95 (0.18)
2.82 (0.26)
AETD2812
33 /16" (856) 12 /16" (325) 34 /16" (868) 13 /16" (338)
2.09 (0.19)
3.00 (0.28)
AETD3012
37 11/16" (957) 12 13/16" (325) 38 3/16" (970) 13 5/16" (338)
2.36 (0.22)
3.35 (0.31)
AETD3612
43 11/16" (1110) 12 13/16" (325) 44 3/16" (1122) 13 5/16" (338)
2.77 (0.26)
3.89 (0.36)
AETD4012
50 3/4" (1289) 12 13/16" (325)
51 1/4" (1302) 13 5/16" (338)
3.25 (0.30)
4.52 (0.42)
AETD5012
62 3/4" (1594) 12 13/16" (325)
63 1/4" (1607) 13 5/16" (338)
4.07 (0.38)
5.58 (0.52)
AETD5412
66 3/4" (1695) 12 13/16" (325)
67 1/4" (1708) 13 5/16" (338)
4.34 (0.40)
5.94 (0.55)
AETD6012
74 3/4" (1899) 12 13/16" (325)
75 1/4" (1911) 13 5/16" (338)
4.89 (0.45)
6.65 (0.62)
AETD7012
86 3/4" (2203) 12 13/16" (325)
87 1/4" (2216) 13 5/16" (338)
5.71 (0.53)
7.72 (0.72)
AETD0817
9 15/16"
(252) 17 13/16" (452) 10 7/16" (265) 18 5/16" (465)
0.71 (0.07)
1.23 (0.11)
AETD1017
15 15/16" (405) 17 13/16" (452) 16 7/16" (418) 18 5/16" (465)
1.33 (0.12)
1.97 (0.18)
AETD2017
25 11/16" (652) 17 13/16" (452) 26 3/16" (665) 18 5/16" (465)
2.33 (0.22)
3.18 (0.30)
AETD2617
31 11/16" (805) 17 13/16" (452) 32 3/16" (818) 18 5/16" (465)
2.95 (0.27)
3.92 (0.36)
AETD2817
33 11/16" (856) 17 13/16" (452) 34 3/16" (868) 18 5/16" (465)
3.16 (0.29)
4.17 (0.39)
AETD3017
37 11/16" (957) 17 13/16" (452) 38 3/16" (970) 18 5/16" (465)
3.57 (0.33)
4.66 (0.43)
AETD3617
43 11/16" (1110) 17 13/16" (452) 44 3/16" (1122) 18 5/16" (465)
4.19 (0.39)
5.40 (0.50)
AETD4017
50 3/4" (1289) 17 13/16" (452)
51 1/4" (1302) 18 5/16" (465)
4.91 (0.46)
6.28 (0.58)
AETD5017
62 3/4" (1594) 17 13/16" (452)
63 1/4" (1607) 18 5/16" (465)
6.15 (0.57)
7.76 (0.72)
AETD5417
66 3/4" (1695) 17 13/16" (452)
67 1/4" (1708) 18 5/16" (465)
6.56 (0.61)
8.26 (0.77)
AETD6017
74 3/4" (1899) 17 13/16" (452)
75 1/4" (1911) 18 5/16" (465)
7.38 (0.69)
9.25 (0.86)
AETD7017
86 3/4" (2203) 17 13/16" (452)
87 1/4" (2216) 18 5/16" (465)
8.61 (0.80)
10.73 (1.00)
11
13
3
5
AETD08111
9 15/16"
(252) 21 13/16" (554) 10 7/16" (265) 22 5/16" (567)
0.91 (0.08)
1.51 (0.14)
AETD10111
15 15/16" (405) 21 13/16" (554) 16 7/16" (418) 22 5/16" (567)
1.69 (0.16)
2.41 (0.22)
AETD20111
25 11/16" (652) 21 13/16" (554) 26 3/16" (665) 22 5/16" (567)
2.96 (0.27)
3.89 (0.36)
AETD26111
31 11/16" (805) 21 13/16" (554) 32 3/16" (818) 22 5/16" (567)
3.75 (0.35)
4.80 (0.45)
AETD28111
33 11/16" (856) 21 13/16" (554) 34 3/16" (868) 22 5/16" (567)
4.01 (0.37)
5.10 (0.47)
AETD30111
37 /16" (957) 21 /16" (554) 38 /16" (970) 22 /16" (567)
4.53 (0.42)
5.71 (0.53)
11
13
3
5
continued on next page
204
Unit Dimension Height
Min. Rough Opening
Custom-size windows are available in 1 ⁄ 8" (3) increments.0" Direct Set
AETD7029 Rectangular Entry Door Transom Direct-Set Direct Set Direct Set Direct-set Sash Glazedtransoms (AETD) provide maximum
Unit Dimension Height
Sidelight Dimensions Transom Number
Minimum Rough Opening Height
Direct-Set Rectangular Entry Door Transom Dimensions and Specifications
unobstructed glass. Direct-set dimensions and AETD7029 AETD7029 specifications shown. AETI7029 Sash Glazed Sash Glazed AETI7029-2 AETI7029 AETI7029
AETI7029-2 Sash-Set Rectangular Entry Door Transoms AETI7029-2
Sash-set single (AETXXXX-1) and twin (AETXXXX-2) transoms are also available. Contact your Andersen supplier for dimensions and specifications. • "Transom Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters or square meters.
1 1 ⁄ 2" Unobstructed 1 1 ⁄ 2" (38) Glass Height (38)
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (1 Jamb De
Curved He
ENTRY DOORS
Direct-Set Rectangular Entry Door Transom Dimensions and Specifications (continued) Glass Area Sq. Ft./(m2)
Overall Sidelight Area Sq. Ft./(m2)
AETD36111
43 11/16" (1110) 21 13/16" (554) 44 3/16" (1122) 22 5/16" (567)
5.32 (0.49)
6.62 (0.61)
AETD40111
50 3/4" (1289) 21 13/16" (554)
51 1/4" (1302) 22 5/16" (567)
6.24 (0.58)
7.69 (0.71)
AETD50111
62 3/4" (1594) 21 13/16" (554)
63 1/4" (1607) 22 5/16" (567)
7.81 (0.73)
9.51 (0.88)
AETD54111
66 3/4" (1695) 21 13/16" (554)
67 1/4" (1708) 22 5/16" (567)
8.33 (0.77)
10.11 (0.94)
AETD60111
74 3/4" (1899) 21 13/16" (554)
75 1/4" (1911) 22 5/16" (567)
9.37 (0.87)
11.32 (1.05)
AETD70111
86 3/4" (2203) 21 13/16" (554)
87 1/4" (2216) 22 5/16" (567)
AETD0827
9 15/16"
AETD1027
15 15/16" (405)
AETD2027
25 11/16" (652)
AETD2627
31 11/16" (805)
AETD2827 AETD3027
Width Inches/(mm)
Height Inches/(mm)
Width Inches/(mm)
Custom-size windows are available in 1 ⁄ 8" (3) increments.
10.94 (1.02)
13.14 (1.22)
(762) 10 7/16" (265)
30 1/2"
(775)
1.30 (0.12)
2.07 (0.19)
30"
(762) 16 7/16" (418)
30 1/2"
(775)
2.43 (0.23)
3.32 (0.31)
30"
(762) 26 3/16" (665)
30 1/2"
(775)
4.25 (0.39)
5.35 (0.50)
30"
(762) 32 3/16" (818)
30 1/2"
(775)
5.38 (0.50)
6.60 (0.61)
33 11/16" (856)
30"
(762) 34 3/16" (868)
30 1/2"
(775)
5.75 (0.53)
7.02 (0.65)
37 11/16" (957)
30"
(762) 38 3/16" (970)
30 1/2"
(775)
6.50 (0.60)
7.85 (0.73)
AETD3627
43 11/16" (1110)
30"
(762) 44 3/16" (1122) 30 1/2"
(775)
7.63 (0.71)
9.10 (0.85)
AETD4027
50 3/4" (1289)
30"
(762)
51 1/4" (1302) 30 1/2"
(775)
8.95 (0.83)
10.57 (0.98)
AETD5027
62 3/4" (1594)
30"
(762)
63 1/4" (1607) 30 1/2"
(775)
11.20 (1.04)
13.07 (1.21)
AETD5427
66 3/4" (1695)
30"
(762)
67 1/4" (1708) 30 1/2"
(775)
11.95 (1.11)
13.91 (1.29)
AETD6027
74 3/4" (1899)
30"
(762)
75 1/4" (1911) 30 1/2"
(775)
13.45 (1.25)
15.57 (1.45)
AETD7027
86 3/4" (2203)
30"
(762)
87 1/4" (2216) 30 1/2"
(775)
15.70 (1.46)
18.07 (1.68)
AETD4029
50 3/4" (1289)
32"
(813)
51 1/4" (1302) 32 1/2"
(826)
9.62 (0.89)
11.28 (1.05)
AETD5029
62 3/4" (1594)
32"
(813)
63 1/4" (1607) 32 1/2"
(826)
12.03 (1.12)
13.94 (1.30)
AETD5429
66 3/4" (1695)
32"
(813)
67 1/4" (1708) 32 1/2"
(826)
12.84 (1.19)
AETD6029
74 3/4" (1899)
32"
(813)
75 1/4" (1911) 32 1/2"
(826)
14.45 (1.34)
14.83 (1.38) 1 5 ⁄ 16" 16.61 (1.54) (33)
4 9 ⁄ 16" (116) AETI7029-2 Sash-Set Rectangular Entry Door Transoms AETI7029-2 Jamb Depth
AETD7029
86 3/4" (2203)
32"
(813)
87 1/4" (2216) 32 1/2"
(826)
16.87 (1.57)
" 50 3/4" (1289)1 5 ⁄ 1648"
4 ⁄ 16"51(116) 1/ " (1302) 48 1/ " (1232) (1219) 14.92 (1.39) 4 2
19.28 (1.79)
Sash-set single (AETXXXX-1) and twin (AETXXXX-2)
AETD4041
16.92 (1.57)
AETD5041
62 3/4" (1594)
48"
(1219) 63 /4" (1607) 48 1/2" (1232) 18.67 (1.73)
20.92 (1.94)
AETD5441
66 3/4" (1695)
48"
(1219) 67 1/4" (1708) 48 1/2" (1232) 19.92 (1.85)
22.25 (2.07)
AETD6041
74 3/4" (1899)
48"
(1219) 75 1/4" (1911) 48 1/2" (1232) 22.42 (2.08)
24.92 (2.32)
AETD7041
86 3/4" (2203)
48"
(1219) 87 1/4" (2216) 48 1/2" (1232) 26.17 (2.43)
28.92 (2.69)
AETD4051
50 3/4" (1289)
60"
(1524) 51 1/4" (1302) 60 1/2" (1537) 18.90 (1.76)
21.15 (1.96)
AETD5051
62 3/4" (1594)
60"
(1524) 63 1/4" (1607) 60 1/2" (1537) 23.65 (2.20)
26.15 (2.43)
66 3/4" (1695)
60"
(1524) 67 1/4" (1708) 60 1/2" (1537) 25.23 (2.34)
27.81 (2.58)
74 3/4" (1899)
60"
(1524) 75 1/4" (1911) 60 1/2" (1537) 28.40 (2.64)
31.15 (2.89)
86 3/4" (2203)
60"
(1524) 87 1/4" (2216) 60 1/2" (1537) 33.15 (3.08)
36.15 (3.36)
Direct-Set Entry Door Transom Details
1 ⁄4"
(6)
Unit Dimension Width Min. Rough Opening Width
Entry Doors Entry Door Transoms
13 ⁄ 16"
0"
1 5 ⁄ 16" (33)
(21)
3 3 ⁄ 16" (81)
supplier for dimensions 7 ⁄ 16"and (11) specifications.
Unobstructed Glass Height
Curved Head
13 ⁄ 16"
(21)
Width Varies to Match Door or Sidelight Stile 11 ⁄ 16 11Below " (17) ⁄ 16" (17)
1 ⁄4"
(6)
0"
9 ⁄ 16" (116) 1 5 ⁄ 16" 1 5 ⁄ 16"4 9 ⁄ 16" 4(116) (33) (33) Jamb Depth Jamb Depth
CurvedCurved Head Head
Jamb
Curved Head
• "Transom Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, panning, brackets, fasteners or other items. 7 ⁄ 16" sill (11) See pages 288-289 for more details. • Dimensions in parentheses are in millimeters or square meters.
0"
0"
4 9 ⁄ 16" (116) Jamb Depth
transoms are also available. Contact your Andersen
13 ⁄ 16" (21) 13 ⁄ 16" (21)
Unit Dimension Width Min. Rough Opening Width
Unit Dimension Height Rough Opening Unit Dimension Minimum Height Height
Jamb
AETI7029-2 AETI7029 AETI7029
Minimum Rough Opening Height
Interior Trim Stop
Unit Dimension HeightRough Opening Unit Dimension Minimum Height Height
(17)
Minimum Rough Opening Height
4 9 ⁄ 16" (116) Jamb Depth
5 7⁄ 8" (149)
(21)
11 ⁄ 16"
Sash Glazed Sash Glazed
9 ⁄ 16" (116) 1 5 ⁄ 16" 1 5 ⁄ 16"4 9 ⁄ 16" 4(116) (33) (33) Jamb Depth Jamb Depth
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
13 ⁄ 16"
unobstructed glass. Direct-set dimensions and AETD7029 specifications shown. AETD7029 AETI7029
7⁄ 8" (149) Unit Dimension5Height Dimension Height ⁄ 2" Unobstructed 1 1 ⁄ 2" 1 1 Unit Minimum Rough Opening Height (38) Glass Height (38) 4 9 ⁄ 16" (116) 1 1 ⁄ 2" Unobstructed 1 1 ⁄ 2"Unit Dimension Height Unit Dimension Height Jamb Depth (38) Glass Height (38) 3 3 ⁄ 16" Unobstructed 3 3 ⁄ 16" (81) Glass Height (81)
13 ⁄ 16" (21)
AETD7029 Rectangular Entry Door Transom Direct-Set Direct Set Direct Set transoms (AETD) provide maximum Direct-set Sash Glazed
3 1 ⁄ 8" (79)
11 ⁄ 16" (17)
Dimension Height 2" Unobstructed 1 1 ⁄ 2" 1 1 ⁄Unit (38) Glass Height (38) (149) 1 1 ⁄ 2" Unobstructed 1 1 ⁄ 2" (38) Glass Height (38) 4 9 ⁄ 16" (116) Minimum Rough Opening Height Jamb Depth Unit Dimension Height Unit Dimension Height
Curved Head
Direct Set
5 7⁄ 8"
1 1 ⁄ 2" Unobstructed 1 1 ⁄ 2" (38) Glass Height (38)
Unit Dimension Height
Jamb Depth 1
Unit Dimension Height
13 ⁄ 16" (21)
0"
9
Unit Dimension Height
AETD7051
30"
(33)
Minimum Rough Opening Height
AETD6051
(252)
3 3 ⁄ 16" (81)
Height Inches/(mm)
AETD5451
CurvedCurved Head Head Width Varies to Match Door or Sidelight Stile 11 Below 11 ⁄ 16" (17) ⁄ 16" (17)
0"
0"
13 ⁄ 16" (21) 13 ⁄ 16" (21)
Jamb 1 ⁄4" (6)
Unit Dimension Width Min. Rough Opening Width
Horizontal Section
Vertical Section
Vertical Section
Direct-Set
Direct-Set over Inswing Entry Door
Direct-Set over Outswing Entry Door 11 ⁄ 16" 11
13 ⁄ 16" 13
7
4 9 ⁄ 16" (116) 5 7⁄ 8" (149) Jamb Depth 4 9 ⁄ 16" (116) Jamb Depth
⁄ 16" ⁄ 16" • 4 9/16" (116) jamb depth measurement is from backside of installation flange. (21) (21) (17) (17) • Light-colored areas are parts included with window and/or door. Dark-colored areas are additional Andersen® parts required to complete window and/or door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. InteriorInterior • Dimensions in parentheses are in millimeters. Trim Stop Trim Stop • Clad details shown, wood also available. 9/ " 9/ " • Transoms are available in both 4 16 (116) and 6 16 (167) jamb depths. 5 7⁄ 8" (149)
11 ⁄ 16" (17)
Min. Rough Opening
3 3 ⁄ 16" (81)
Sidelight Dimensions Transom Number
Jamb Jamb 1 ⁄4"
Unit Dimension Width Width Unit Dimension
1 ⁄4"
205
ough Opening Width
6"
1 ⁄4" (6)
3 3 ⁄ 16" (81)
3 1 ⁄ 8" (79)
0"
7 ⁄ 16" (11) 13 ⁄ 16"
(21)
Unit Dimension Width Min. Rough Opening Width
Curved Head
0"
Horizontal Section
Vertical Section
Sash-Set Transom for Outswing Entry Door
Sash-Set Transom over Outswing Entry Door
5 7⁄ 8" (149)
4 9 ⁄ 16" (116) Jamb Depth
5 7⁄ 8" (149)
Width Varies to Match Door or Sidelight Stile Below
Unit Dimension Width
Jamb
Unit Dimension Width
3 3 ⁄ 16" (81) Unobstructed Glass Height 3 3 ⁄ 16" (81)
Unit Dimension Height Unit Dimension Height 4 9 ⁄ 16" (116) Jamb Depth
5 7⁄ 8" (149) 3 3 ⁄ 16" (81)
3 3 ⁄ 16" (81)
Min. Rough Opening Width
3 3 ⁄ 16" (81)
Curved Head
(6)
Unit Dimension Width
Unobstructed Glass Height
1 ⁄4"
1 ⁄4" 1 ⁄4" • 4 9/16" (116) jamb depth measurement is from backside of installation flange. (6) and/orMin. doorRough assembly as shown. • Light-colored areas are parts included with window and/or door.(6) Dark-colored areOpening additionalWidth Andersen® parts required to complete window h Opening Width Min.areas Rough Opening Width • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters. • Clad details shown, wood also available. • Transoms are available in both 4 9/16" (116) and 6 9/16" (167) jamb depths.
206
Minimum Rough Opening Height
3 1 ⁄ 8" (79)
Jamb
7 ⁄ 16" (11)
Min. Rough Opening Width
Jamb
Unobstructed Glass Height
Unit Dimension Height
3 3 ⁄ 16" (81) (21)
Unit Dimension Width
Width Varies to Match Door or Sidelight Stile Below
4 9 ⁄ 16" (116) Jamb Depth
3 3 ⁄ 16" (81)
13 ⁄ 16"
1 5 ⁄ 16" (33)
Unit Dimension Height
(149) 5 7⁄ 8"
4 9 ⁄ 16" (116) Jamb Depth
4 9 ⁄ 16" (116) Jamb Depth
3 3 ⁄ 16" (81) 1 5 ⁄ 16" (33)
Jamb
mension Width
33 (8
3 3⁄ (8 Unobstructed Glass Height
Unit Dimension Height
Width Varies to Match Door or Sidelight Stile Below
Width Varies to Match Door or Sidelight Stile Below
Interior Trim Stop
Unit Dimension Height
1 1 ⁄ 2" Unobstructed 1 1 ⁄ 2" (38) Glass Height (38)
4 9 ⁄ 16" (116) Jamb Depth
5 7⁄ 8" (149)
3 3 ⁄ 16" (81)
Vertical Section
Unit Dimension Height
Dimension Width
Curved Head
0"
Sash-Set Transom over Inswing Entry Door
Unit Dimension Height
5 7⁄ 8" (149)
(38)
13 ⁄ 16" (21)
Horizontal Curved Section Head
Width Varies to Match Door or Sidelight Stile Below
11 ⁄ 16" (17)
Unit Dimension Width
(17)
Curved Head
to Match Door or ht Stile Below
(21)
4 9 ⁄ 16" (116) Jamb Depth
(6)
7 ⁄ 16" (11)
Min. Rough Opening Width
Minimum Rough Opening Height
1 ⁄4"
1 ⁄4" (6)
11 ⁄ 16"
Interior Trim Stop
Curved Head
13 ⁄ 16"
4 9 ⁄ 16" (116) Jamb Depth
(21)
7 ⁄ 16" (11)
0"
Jamb
3 3 ⁄ 16" (81)
Jamb
13 ⁄ 16"
Sash-Set Transom for Inswing Entry Door
0"
1 5 ⁄ 16" (33)
Width Varies to Match Door or Sidelight Stile Below
Min. Rough Opening Width
Minimum Rough Opening Height
4 9 ⁄ 16" (116) Jamb Depth
(21)
Unit Dimension Height
5 7⁄ 8" (149)
13 ⁄ 16"
(6)
13 ⁄ 16" (21)
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33)
11 ⁄ 16" (17)
Unobstructed Glass Height
(21)
Unit Dimension Width
1 ⁄4"
4 9 ⁄ 16" (116) Jamb Depth
Glass Height
13 ⁄ 16"
7 ⁄ 16" (11)
(38)
5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth Minimum Rough Opening Height
7 ⁄ 16" (11)
Curved Head
Unit Dimension Height
Jamb
Unit Dimension Height
(21)
0"
Curved Head
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33)
3 3 ⁄ 16" (81)
13 ⁄ 16"
0"
(21)
4 9 ⁄ 16" (116) Jamb Depth
Width Varies to Match Door or Sidelight Stile Below
Unobstructed Glass Height
13 ⁄ 16" (21)
Unit Dimension Height
4 9 ⁄ 16" (116) Jamb Depth
5 7⁄ 8" (149)
11 ⁄ 16" (17)
Unit Dimension Height
urved Head
13 ⁄ 16"
1 5 ⁄ 16" (33)
Unit Height 3 ⁄ 16Dimension 3 " (81)
4 9 ⁄ 16" (116) Jamb Depth
4 9 ⁄ 16" (116) Minimum Rough Opening Height Jamb Depth
13 ⁄ 16" (21)
Minimum Rough Opening Height
7 ⁄ 16" (11)
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 0"
3 3 ⁄ 16" (81)
Sash-Set Entry Door Transom Details
11 ⁄ 16" (17)
Curved Head
Unit Dimension Height
Unobstructed Glass Height
Curved Head
3 1 ⁄ 8" (79)
Head
Unit Dimension Height
Minimum Rough Opening Height
ENTRY DOOR TRANSOMS
Minimum Rough Opening Height
3 3⁄ (8
7 ⁄ 16" (11)
Jamb 1 ⁄4" (6)
Unit Dimension Width
Min. Rough Opening Wi
COMMERCIAL OUTSWING ENTRY DOORS FEATURES
COMMERCIAL OUTSWING
ENTRY DOORS ENTRY DOORS
ACCESSORIES Sold Separately
A
Hardware
C
Frame A Standard commercial entry door sizes
Accepts standard commercial closer, panic bar, kick plate and hardware systems from most manufacturers.
include 6'–10" (2083), 7'–1 5⁄16" (2167) and 7'–11" (2413) heights. Also available in custom sizes. Contact your Andersen supplier for details.
4 3⁄4" (121) intermediate rail can be added to facilitate mounting of exit hardware.
Thick aluminum cladding finish. Standard cladding finish meets AAMA 2604. An optional finish that meets the AAMA 2605 standard is available. Optional wood exteriors also available.
B
Panel B Standard offering is a 10" (254) bottom rail with 7 1⁄2" (191) top rail to conceal closure hardware. Optional 12" (305) bottom rail and custom width stiles are also available. Contact your Andersen supplier for details. Complies with accessibility requirements for commercial and residential applications. See page 208 for details. Commercial-grade ball-bearing hinges with a stainless steel look.
Grilles
Glass C High-performance glass
Grilles are available in a variety of configurations and widths.
options include: • Low-E4® tempered glass® • Low-E4® HeatLock™ tempered glass • Low-E4® Sun tempered glass • Low-E4® SmartSun™ tempered glass • Low-E4® SmartSun™ HeatLock™ tempered glass
Art Glass Decorative insulated art glass designs are available.
D Low-profile thermally broken
Additional glass options are available. Contact your Andersen supplier. A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite.
EXTERIOR
White
Canvas
Sandtone
3'-1 5/8" (956)
Sill
D
Terratone
Forest Green
Dark Bronze
Entry Doors
Interior extension jambs available in 1⁄16" (1.5) increments between 5 1⁄16" (129) and 12" (305).
mill-finished aluminum sill is standard. Bronze anodized finish is also available. Innovative dam design helps resist water infiltration. The sill can be extended to the interior for various wall conditions. For more information about glass, grilles and installation accessories, contact your Andersen supplier.
EXTERIOR / INTERIOR
INTERIOR
WOOD SPECIES (Additional species available)
PAINTED OPTIONS
Pine
White
Maple
Oak
Alder
Birch Bark
Primed
Naturally occurring variations in grain, color and texture of wood make each door one-of-a-kind. All wood interiors are unfinished unless a painted option is specified.
Dove Gray
Prairie Grass
Red Rock
Cocoa Bean
Black
Cherry
Mahogany* Vertical Grain Douglas Fir
* Actual wood is Sapele, a non-endangered species of mahogany, grown in Africa, with color and characteristics similar to American mahoganies. Dimensions in parentheses are in millimeters. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
207
COMMERCIAL OUTSWING ENTRY DOORS Table of Commercial Outswing Entry Door and Sidelight Sizes
Scale 1 ⁄ 8" = 1'-0" (1:96) 1'-3 7 ⁄ 8" (403)
2'-1 5 ⁄ 8" (651)
2'-7 5 ⁄ 8" (803)
2'-9 5 ⁄ 8" (854)
3'-1 5 ⁄ 8" (956)
3'-9 7 ⁄ 8" (1165)
6'-2 3 ⁄4" (1899)
6'-10" (2083)
Door Dimension
Custom-size doors are available in 1 ⁄ 8" (3)
7'-1 5 ⁄ 16" (2167)
increments.
Standard sizes shown. See page 209 for minimum rough opening dimensions, glass area dimensions and opening specifications. Available in both 10" (254) and 12" (305) bottom rail heights. For additional stile
7'-11" (2413)
widths and additional options contact your Andersen supplier. This door has a limited water rating (LW) due to the low-threshold sill. See page 211 for threshold and bottom rail details. Handle and lock are located between 34" (864) and 48" (1219). Check local building codes, including the Americans with Disabilities Act (ADA) accessibility.
• Dimensions in parentheses are in millimeters.
208
For entry door transoms see page 204.
COMMERCIAL OUTSWING ENTRY DOORS ENTRY DOORS
Custom-size doors are available in 1 ⁄ 8" (3) increments.
ACDxx68
ACDxx70
ACDxx68AP/PA
ACDxx80
ACDxx70AP/PA
Available in custom designed panels, see page 192.
ACDxx80AP/PA
Stationary doors are also available (i.e. 3068S or 4068SS).
Commercial Outswing Entry Door Dimensions and Specifications Clear Opening Maximums
Number of Panels Open*
Width Inches/(mm)
ACD3068
1
37 11/16" (957)
82"
(2083) 38 3/16"
82 1/2" (2096)
19.45 (1.81)
33 1/8"
(841)
35 1/16"
79 7/8" (2029)
10.60 (0.98)
19.45 (1.81)
21.46
(1.99)
ACD3668
1
43 11/16" (1110)
82"
(2083) 44 3/16" (1122) 82 1/2" (2096)
22.78 (2.12)
39 1/8"
(994)
41 1/16" (1043) 79 7/8" (2029)
13.15 (1.22)
22.78 (2.12)
24.88
(2.31)
82"
(2083) 46 7/16" (1180) 82 1/2" (2180)
Height Inches/(mm)
Width Inches/(mm) (970)
Height Inches/(mm)
Clear Opening Area Sq. Ft./(m2)
90° Width Inches/(mm)
Full Width Inches/(mm)
Height Inches/(mm)
(891)
Glass Area Sq. Ft./(m2)
Vent Area Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
ACD3868
1
45 15/16" (1167)
24.02 (2.23)
41 3/8" (1051) 43 5/16" (1100) 79 7/8" (2029)
14.11 (1.31)
24.02 (2.23)
26.16
(2.43)
ACD3070
1
37 11/16" (957)
(970) 85 13/16" (2180)
20.26 (1.88)
33 1/8"
(841)
35 1/16"
83 3/16" (2113)
11.17 (1.04)
20.26 (1.88)
22.33
(2.07)
ACD3670
1
43 11/16" (1110) 85 5/16" (2167) 44 3/16" (1122) 85 13/16" (2180)
23.72 (2.20)
39 1/8"
(994)
41 1/16" (1043) 83 3/16" (2113)
13.86 (1.29)
23.72 (2.20)
25.88
(2.40)
ACD3870
1
45 15/16" (1167) 85 5/16" (2167) 46 7/16" (1180) 85 13/16" (2426)
25.02 (2.32)
41 /8" (1051) 43 5/16" (1100) 83 3/16" (2113)
14.87 (1.38)
25.02 (2.32)
27.22
(2.53)
ACD3080
1
37 11/16" (957)
95"
(2413) 38 3/16"
95 1/2" (2426)
22.61 (2.10)
33 1/8"
(841)
35 1/16"
92 7/8" (2359)
12.84 (1.19)
22.61 (2.10)
24.86
(2.31)
ACD3680
1
43 11/16" (1110)
95"
(2413) 44 3/16" (1122) 95 1/2" (2426)
26.48 (2.46)
39 1/8"
(994)
41 1/16" (1043) 92 7/8" (2359)
15.94 (1.48)
26.48 (2.46)
28.82
(2.68)
ACD3880
1
45 15/16" (1167)
95"
(2413) 46 7/16" (1180) 95 1/2" (2096)
27.94 (2.60)
41 3/8" (1051) 43 5/16" (1100) 92 7/8" (2359)
17.10 (1.59)
27.94 (2.60)
30.31
(2.82)
ACD4068
2
50 3/4" (1289)
82"
(2083) 51 1/4" (1302) 82 1/2" (2096)
26.69 (2.48)
44 3/16" (1122) 48 1/8" (1222) 79 7/8" (2029)
12.46 (1.16)
26.69 (2.48)
28.90
(2.68)
ACSLOxx68
85 5/16" (2167) 38 3/16"
ACSLOxx70
ACSLDxx68
ACSLOxx80
(970)
ACD4068
1
50 3/4" (1289)
82"
(2083) 51 1/4" (1302) 82 1/2" (2096)
12.76 (1.19)
ACD5068
2
62 3/4" (1594)
82"
(2083) 63 1/4" (1607) 82 1/2" (2096)
33.35 (3.10)
ACD5068
1
62 3/4" (1594)
82"
(2083) 63 1/4" (1607) 82 1/2" (2096)
16.09 (1.49)
ACD5468
2
66 3/4" (1695)
82"
(2083) 67 1/4" (1708) 82 1/2" (2096)
35.57 (3.30)
ACD5468
1
66 3/4" (1695)
82"
(2083) 67 1/4" (1708) 82 1/2" (2096)
17.20 (1.60)
ACD6068
2
74 3/4" (1899)
82"
(2083) 75 1/4" (1911) 82 1/2" (2096)
40.01 (3.72)
82"
ACD6068
1
74 3/4" (1899)
(2083) 75 1/4" (1911) 82 1/2" (2180)
19.41 (1.80)
ACD4070
2
50 3/4" (1289) 85 5/16" (2167) 51 1/4" (1302) 85 13/16" (2180)
27.80 (2.58)
ACD4070
1
50 3/4" (1289) 85 5/16" (2167) 51 1/4" (1302) 85 13/16" (2180)
13.29 (1.23)
ACD5070
2
62 3/4" (1594) 85 5/16" (2167) 63 1/4" (1607) 85 13/16" (2180)
34.73 (3.23)
ACD5070
1
62 3/4" (1594) 85 5/16" (2167) 63 1/4" (1607) 85 13/16" (2180)
16.75 (1.56)
ACD5470
2
66 3/4" (1695) 85 5/16" (2167) 67 1/4" (1708) 85 13/16" (2180)
37.04 (3.44)
ACD5470
1
66 3/4" (1695) 85 5/16" (2167) 67 1/4" (1708) 85 13/16" (2180)
17.91 (1.66)
ACD6070
2
74 3/4" (1899) 85 5/16" (2167) 75 1/4" (1911) 85 13/16" (2180)
41.67 (3.87)
ACD6070
1
74 3/4" (1899) 85 5/16" (2167) 75 1/4" (1911) 85 13/16" (2426)
20.22 (1.88)
ACD4080
2
50 3/4" (1289)
31.04 (2.88)
95"
(2413) 51 1/4" (1302) 95 1/2" (2426)
ACD4080
1
50 3/4" (1289)
95"
(2413) 51 1/4" (1302) 95 1/2" (2426)
14.83 (1.38)
ACD5080
2
62 3/4" (1594)
95"
(2413) 63 1/4" (1607) 95 1/2" (2426)
38.78 (3.60)
ACD5080
1
62 3/4" (1594)
95"
(2413) 63 1/4" (1607) 95 1/2" (2426)
18.70 (1.74)
ACD5480
2
66 3/4" (1695)
95"
(2413) 67 1/4" (1708) 95 1/2" (2426)
41.36 (3.84)
ACD5480
1
66 3/4" (1695)
95"
(2413) 67 1/4" (1708) 95 1/2" (2426)
19.99 (1.86)
ACD6080
2
74 3/4" (1899)
95"
(2413) 75 1/4" (1911) 95 1/2" (2426)
46.52 (4.32)
ACD6080
1
74 3/4" (1899)
95"
(2413) 75 1/4" (1911) 95 1/2" (2426)
22.57 (2.10)
ACSLDxx70 3
21"
ACSLDxx80
79 7/8" (2029)
12.46 (1.16)
12.76 (1.19)
28.90
(2.68)
16.08 (1.49)
33.35 (3.10)
35.73
(3.32)
79 7/8" (2029)
16.08 (1.49)
16.09 (1.49)
35.73
(3.32)
17.79 (1.65)
35.57 (3.30)
38.01
(3.53)
79 7/8" (2029)
17.79 (1.65)
17.20 (1.60)
38.01
(3.53)
21.20 (1.97)
40.01 (3.72)
42.57
(3.95)
79 7/8" (2029)
21.20 (1.97)
19.41 (1.80)
42.57
(3.95)
44 3/16" (1122) 48 1/8" (1222) 83 3/16" (2113)
13.13 (1.22)
27.80 (2.58)
30.07
(2.79)
83 3/16" (2113)
13.13 (1.22)
13.29 (1.23)
30.07
(2.79)
56 3/16" (1427) 60 1/8" (1527) 83 3/16" (2113)
16.95 (1.57)
34.73 (3.23)
37.18
(3.45)
83 3/16" (2113)
16.95 (1.57)
16.75 (1.56)
37.18
(3.45)
60 3/16" (1529) 64 1/8" (1629) 83 3/16" (2113)
18.75 (1.74)
37.04 (3.44)
39.55
(3.67)
83 3/16" (2113)
18.75 (1.74)
17.91 (1.66)
39.55
(3.67)
68 3/16" (1732) 72 1/8" (1832) 83 3/16" (2113)
22.34 (2.08)
41.67 (3.87)
44.29
(4.11)
83 3/16" (2113)
22.34 (2.08)
20.22 (1.88)
44.29
(4.11)
44 3/16" (1122) 48 1/8" (1222) 92 7/8" (2359)
15.10 (1.40)
31.04 (2.88)
33.48
(3.11)
21" 27" 29" 33" 21"
(838) (533) (686) (737) (838)
35" 23" 29" 31" 35"
(889) (584) (737) (787) (889)
92 7/8" (2359)
15.10 (1.40)
14.83 (1.38)
33.48
(3.11)
19.49 (1.81)
38.78 (3.60)
41.40
(3.85)
92 7/8" (2359)
19.49 (1.81)
18.70 (1.74)
41.40
(3.85)
21.56 (2.00)
41.36 (3.84)
44.04
(4.09)
92 7/8" (2359)
21.56 (2.00)
19.99 (1.86)
44.04
(4.09)
25.69 (2.39)
46.52 (4.32)
49.31
(4.58)
25.69 (2.39)
22.57
49.31
(4.58)
(838)
31"
(737)
68 3/16" (1732) 72 1/8" (1832) 92 7/8" (2359) 33"
(737)
29"
(584)
60 3/16" (1529) 64 1/8" (1629) 92 7/8" (2359) 29"
(686)
23"
(787)
56 3/16" (1427) 60 1/8" (1527) 92 7/8" (2359) 27"
(533)
31"
(737)
68 3/16" (1732) 72 1/8" (1832) 79 7/8" (2029) 33"
(737)
29"
(584)
60 3/16" (1529) 64 1/8" (1629) 79 7/8" (2029) 29"
(686)
23"
(891)
56 3/16" (1427) 60 1/8" (1527) 79 7/8" (2029) 27"
(533)
(891)
35"
(787) (889)
92 7/8" (2359)
(2.10)
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters or square meters. *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed.
209
Entry Doors Commercial Outswing Entry Doors & Sidelights
Min. Rough Opening
Door Number
COMMERCIAL OUTSWING ENTRY DOORS ACDxx68
ACDxx70
ACDxx68AP/PA
ACDxx80
ACDxx70AP/PA
ACDxx80AP/PA
Direct-Set Commercial Outswing Entry Door Sidelight Dimensions and Specifications Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Overall Sidelight Area Sq. Ft./(m2)
3.77 (0.35)
5.66 (0.53)
ACSLD0868
9 15/16"
(252)
82"
(2083) 10 7/16"
(265)
82 1/2"
(2096)
ACSLD1068
15
15 /16"
(405)
82"
(2083) 16 /16"
(418)
1
82 /2"
(2096)
7.03 (0.65)
9.08 (0.84)
ACSLD2068
25 11/16"
(652)
82"
(2083) 26 3/16"
(665)
82 1/2"
(2096)
12.32 (1.14)
14.63 (1.36)
ACSLD3068
37 11/16"
(957)
82"
(2083) 38 3/16"
(970)
82 1/2"
(2096)
18.84 (1.75)
21.46 (1.99)
ACSLD0870
9 15/16"
(252)
85 5/16" (2167) 10 7/16"
(265)
85 13/16" (2180)
3.93 (0.37)
5.89 (0.55)
ACSLD1070
15 15/16"
(405)
85 5/16" (2167) 16 7/16 " (418) 85 13/16" (2180) 7.32 (0.68) ACSLOxx80 9.44 (0.88) ACSLOxx70 ACSLOxx68
ACSLD2070
25 11/16"
(652)
85 5/16" (2167) 26 3/16"
(665)
85 13/16" (2180)
12.84 (1.19)
15.22 (1.41)
ACSLD3070
37 11/16"
(957)
85 5/16" (2167) 38 3/16"
(970)
85 13/16" (2180)
19.63 (1.82)
22.33 (2.07)
ACSLD0880
9 15/16"
(252)
95"
(2413) 10 7/16"
(265)
95 1/2"
(2426)
4.40 (0.41)
6.56 (0.61)
ACSLD1080
15 15/16"
(405)
95"
(2413) 16 7/16"
(418)
95 1/2"
(2426)
8.19 (0.76)
10.51 (0.98)
ACSLD2080
25 11/16"
(652)
95"
(2413) 26 3/16"
(665)
95 1/2"
(2426)
14.37 (1.33)
16.95 (1.57)
ACSLD3080
37 11/16"
(957)
95"
(2413) 38 3/16"
(970)
95 1/2"
(2426)
21.97 (2.04)
24.86 (2.31)
7
• "Sidelight Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters or square meters.
1 5 ⁄ 16" (33)
ACSLDxx70
ACSLDxx68
ACSLDxx80
Direct-set (ACSLD) commercial outswing entry door sidelights.
ACDxx68
ACDxx70
4 9 ⁄ 16" (116) Jamb Depth
9 3 ⁄ 16" (233)
Width Inches/(mm)
Unobstr. Glass
Height Inches/(mm)
Unit Dimension Height
Width Inches/(mm)
Min. Rough Opening
Rough Opening Height
Sidelight Dimensions Sidelight Number
ACDxx80
ACDxx68AP/PA
Sidelight Dimensions Sidelight Number
Width Inches/(mm)
Height Inches/(mm)
Min. Rough Opening Width Inches/(mm)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
11 1 ⁄ 2" (292)
Sash-Set Commercial Outswing Entry Door Sidelight Dimensions and Specifications Overall Sidelight Area Sq. Ft./(m2)
ACSLO1068
15 15/16"
(405)
82"
(2083) 16 7/16"
(418)
82 1/2"
(2096)
3.41 (0.32)
9.08 (0.84)
ACSLO2068
25 11/16"
(652)
82"
(2083) 26 3/16"
(665)
82 1/2"
(2096)
7.56 (0.70)
14.63 (1.36)
ACSLO2668
31 11/16"
(805)
82"
(2083) 32 3/16"
(818)
82 1/2"
(2096)
8.79 (0.82)
18.04 (1.68)
ACSLO2868
33 11/16"
(856)
82"
(2083) 34 3/16"
(868)
82 1/2"
(2096)
9.21 (0.86)
19.18 (1.78)
ACSLO1070
15 15/16"
(405)
85 5/16" (2167) 16 7/16"
(418)
85 13/16" (2180)
3.59 (0.33)
9.44 (0.88)
ACSLO2070
25 11/16"
(652)
85 5/16" (2167) 26 3/16"
(665)
85 13/16" (2180)
7.97 (0.74)
15.22 (1.41)
ACSLO2670
31 11/16"
(805)
85 5/16" (2167) 32 3/16"
(818)
85 13/16" (2180)
9.26 (0.86)
18.77 (1.74)
ACSLO2870
33 11/16"
(856)
85 5/16" (2167) 34 3/16"
(868)
85 13/16" (2180)
ACSLO1080
15 15/16"
(405)
95"
(2413) 16 7/16"
(418)
95 1/2"
(2426)
ACSLO2080
25 11/16"
(652)
95"
(2413) 26 3/16"
(665)
95 1/2"
ACSLO2680
31 11/16"
(805)
95"
(2413) 32 3/16"
(818)
95 1/2"
ACSLO2880
33 11/16"
(856)
95"
(2413) 34 3/16"
(868)
95 1/2"
9.71 (0.90)
19.96 (1.85)
4.13 (0.38)
10.51 (0.98)
(2426)
9.16 (0.85)
16.95 (1.57)
(2426)
10.65 (0.99)
20.9 (1.94)
(2426)
11.17 (1.04)
22.22 (2.06)
ACSLOxx68
ACSLOxx70
ACS
ACSLOxx80
Sash-set (ACSLO) commercial outswing entry door sidelights.
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth
• "Sidelight Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters or square meters.
3 ⁄ 8" (10)
210
COMMERCIAL OUTSWING ENTRY DOORS ENTRY DOORS
Commercial Outswing Entry Door Details
Sash-Set Commercial Outswing Entry Door Sidelight Detail
Scale 11 ⁄ 2" (38) ="1'-0"4(305) — 1:8 9 ⁄ 16" (116) 1 5 ⁄ 16
1 5 ⁄ 16" (33) 9 3 ⁄ 16" (233)
1 1 ⁄ 8" (28)
7 ⁄ 16"
(11)
7 ⁄ 16"
4 9 ⁄ 16" (116) Jamb Depth
(11) Vertical Section
6 7 ⁄ 16" (164)
6 7 ⁄ 16" (164)
Unobstr. Glass
Unit Dimension Width
(10)
6 7 ⁄ 16" (164)
6 7 ⁄ 16" (164)
(10)
Rough Opening Width
6 7 ⁄ 16" (164)
Unobstr. Glass
Unit Dimension Width
3 ⁄ 8" (10)
3 ⁄ 8"
1 5 ⁄ 16" (33)
3 ⁄ 8"
" (116) 4 9 ⁄ 16 1 5 ⁄ 16" Jamb Depth (33)
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33)
1 1 ⁄ 8" (28)
7 ⁄ 16" (11) Vertical Section
ACSLDxx80
Entry Doors Commercial Outswing Entry Doors & Sidelights
(11)
6" 1)
ACSLDxx70
Unobstr. Glass 11 1 ⁄ 2" (292)
Unit Dimension Height
9 3 ⁄ 16" Unobstr. (233) Glass
7 ⁄ 16"
(11)
8
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33)
11 1 ⁄ 2" Unobstr. (292) Glass
Rough Opening Height Rough Opening Height
7 ⁄ 16"
1 5 ⁄ 16" (33) 1 5 ⁄ 16" (33)
1 5 ⁄ 16" (33)
11 1 ⁄ 2" (292)
11 1 ⁄ 2"
(292)
Unobstr. Glass
Unit Dimension Height
Unobstr. Glass
Rough Opening Height
9 3 ⁄ 16" (233)
9 3 ⁄ 16" (233)
9 3 ⁄ 16" (233)
1 5 ⁄ 16" (33)
11 1 ⁄ 2" (292)
Unit Dimension Height
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33)
1 5 ⁄ 16" (33)
11 1 ⁄ 2" (292)
Jamb Depth
4 9 ⁄ 16" (116) Jamb Depth
1 5 ⁄ 16" (33)
Unit Dimension Height Unit Dimension Height
9 3 ⁄ 16" (233) 9 3 ⁄ 16" Unobstr. 11 1 ⁄ 2"Unobstr. Rough GlassOpening Height (233) Glass (292)
Unit Dimension Height Unit Dimension Height
Rough Opening Height Rough Opening Height
ACDxx80AP/PA
(33)
4 9 ⁄ 16" (116) 1 5 ⁄ 16" (33) Jamb Depth 1 5 ⁄ 16" 4 9 ⁄ 16" (116) (33) Jamb Depth
1 5 ⁄ 16" (33)
xx70AP/PA
1 Scale = 1'-0" (305) — 1:8 ⁄ 16" (116) 1 5 ⁄ 16" 1 ⁄ 2"4 9(38)
Jamb Depth
Rough Opening Height
(33)
Rough Opening Width Unobstr. Glass
3 ⁄ 8" (10)
6 7 ⁄ 16" (164)
Unit Dimension Width
3 ⁄ 8" (10)
Rough Opening Width
3 ⁄ 8" (10)
4 9 ⁄ 165 " (116) 1 ⁄ 16" Jamb Depth (33)
4 9 ⁄ 16" (116) Jamb Depth
Horizontal Section
(164)
Unobstr. Glass
12 1 ⁄4"
(311)
(10)
1 5 ⁄ 16" (33)
6 7 ⁄ 16"
Unit Dimension Width Rough Opening Width
6 7 ⁄ 16" (164)
3 ⁄ 8"
Unit Dimension Width
6 7 ⁄ 16"
Unobstr. Glass
6 7 ⁄ 16" 3 ⁄ 8" (10)
12 1 ⁄4" (311)
Unobstr. Glass
(164)
(164)
Unobstr. Glass
Unobstr. Glass
6 7 ⁄ 16" (164)
Rough Opening Width 3 ⁄ 8"
(10)
12 1 ⁄4" (311) Horizontal Section Unit Dimension Width Two-Panel Rough Opening Width
Unobstr. Glass
6 7 ⁄ 16" (164)
3 ⁄ 8" (10)
3 ⁄ 8" (10)
• 4 9/16" (116) jamb depth measurements are from backside of installation flange. • Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to unit installation guides at andersenwindow.com. • Dimensions in parentheses are in millimeters. • Clad details shown, wood also available.
211
NOTES PAGE
212
ART GLASS
ART GLASS
Art Glass
ART GLASS
ART GLASS FEATURES
GLASS PATTERNS
Frame For most units, Andersen art glass panel kits include pine and laminated maple trim to give each installation a finished appearance. Panels are edged with steel-reinforced zinc caming for stability. Caming finish options are available in antique (bronze), bright goldtone or silvertone. ®
Availability Each design can be ordered in many shapes and sizes. Andersen art glass panels are sized to fit Andersen® casement, awning, half circle, elliptical, circle, oval, arch, Flexiframe,® double-hung transom and picture windows, Frenchwood® hinged patio doors, Frenchwood® patio door sidelights and Frenchwood® patio door transoms.
Pattern Details
CLASSIC SERIES*
Contact your Andersen supplier for more information — including detailed art glass patterns for specific unit sizes.
Victoria Violet, deep rose, deep green and amber (jewels)
Victoria Light green, lilac, light blue, pink (jewels) and lilac (jewels)
Harmonics Opal, sage and clear bevels (right orientation)
Lotus Light green, amber (jewels) and green (jewels)
Lotus Sand and pink (jewels)
Affinity No color, clear bevels (right orientation)
Regency Sand, deep teal, topaz, copper and smoke (jewels)
Regency Deep rose, deep green, rose and opal amber (jewels)
Glass Designs are offered in several standard color palettes, or choose from the many optional colors for glass and accent “jewels” to create your own unique color combinations.
Installation Panels are secured with polypropylene, snap-lock installation brackets.
Package Includes Andersen art glass panel, certificate of authenticity, installation brackets, wood trim pieces (where applicable), brass screws and complete installation and cleaning instructions.
Andersen® art glass panel
Made under an agreement with the Frank Lloyd Wright Foundation, the four art glass designs which comprise the Frank Lloyd Wright ® Series combine the beauty of Wright’s design with the ™ Andersen commitment to quality. Each design is available in a combination of clear and colored glass, or clear glass only and a wide range of sizes and shapes. Colonnade Marbled white and marbled yellow-green
Prairie Rhythm Iridized green and opal
ARTISAN SERIES**
Taos Dusty coral, copper, sand, deep rose, deep teal and lilac (jewels)
Eucalyptus Caramel, cobalt and teal Diamond Lights Clear fan-shaped bevels
Taos Peach, copper, rose, lilac, light blue and pink (jewels)
Color Options Contact your Andersen supplier for detailed information on color options for each glass. In addition, Andersen gives you a choice of antique, silvertone or bright goldtone caming, the ornamental material used to hold sections of decorative glass in place. NOTE: • Andersen® art glass panel patterns vary based on window size and shape. Contact your Andersen supplier for complete pattern information. • Colors used in the Frank Lloyd Wright® Series will vary from photos and actual glass samples due to the unique character of the mouthblown glass. Colors in the Classic Series and Artisan Series may also vary. Contact your Andersen supplier for more information.
Wichita Caramel, marbled green and marbled white * Classic Series glass patterns are also available with semi-privacy glass or clear antique glass in place of colored glass (except where indicated). ** Artisan Series glass patterns are available in left or right orientations (as viewed from the exterior). All of the Frank Lloyd Wright Series glass patterns are also available with clear glass. This Frank Lloyd Wright Collection product is authorized by the Frank Lloyd Wright Foundation, Taliesin West, Scottsdale, Arizona, U.S.A. “Frank Lloyd Wright”, “Frank Lloyd Wright Collection” and the Frank Lloyd Wright signature are trademarks of the Frank Lloyd Wright Foundation and are used with permission. A portion of the proceeds from this product supports the conservation and education programs of the Foundation.
214
EXTERIOR TRIM
Exterior Trim
WINDOW & DOOR EXTERIOR TRIM
SECTION REFERENCE Sill Nose Detail........................... 218 Brick Mould Detail ..................... 218 3 ½" & 4 ½" Flat Detail ............... 219 Mull Cover Detail ........................ 219 2" & 3 5⁄8" Cornice Detail ............ 220 Decorative Drip Cap Detail ......... 220
EXTERIOR TRIM FEATURES Exterior Trim System
A
Profiles Exterior trim is available in four profiles made from our Fibrex material. Profiles include 3 1⁄2" (89) flat, 4 1⁄2" (114) flat, 2" (51) brick mould, and sill nose for the bottom trim piece.
A For exceptional long-lasting* performance, exterior trim is made from Fibrex® material or high-density urethane with low-maintenance exterior finishes.
Corner Keys
D
B Sill nose profile, made from Fibrex®
Provide tight alignment of corner joints.
B
C
material, is placed at the sill for a traditional look.
Fasteners Screws are made of high-quality stainless steel and provide corner joints with a secure, tight fit.
C Ridged vinyl exterior trim attachment strips (field applied) allow the trim to be securely fastened to the home.
Factory-assembled surrounds install quickly and eliminate measuring, cutting, mitering and filling nail holes. Precut Kits
End Caps
D Trim surrounds are assembled with corner keys and stainless fasteners for stability and strength.
Preassembled Trim Surrounds
Provide a clean appearance when joining the two trim members.
Our Fibrex® material is an environmentally smart composite that contains 40% preconsumer reclaimed wood fiber by weight.
Drip Cap Full length, color matched aluminum drip cap is available with all assembly options.
Knock down kits include precut and predrilled trim with all the necessary components for on-site assembly for windows and patio doors up to 12' (3658) in width. Individual Trim Components
Visualizer & Video An online trim visualizer, installation guides and videos are available at andersenwindows.com/exteriortrim.
PROFILES 13' (3962) factory-finished trim lineals, end caps, corner keys, fasteners, metal drip cap and field attachment strip allow for field fabrication and assembly.
2" (51) BRICK MOULD
Dove Gray trim with Terratone window
4 1/2" (114) FLAT
3 1/2" (89) FLAT
Canvas trim with Forest Green window
Dark Bronze trim with White window
COLORS Trim can match or complement your window and door colors to create a wide range of combinations.
White
Canvas
Sandtone
Terratone
Forest Green
Dark Bronze
Dove Gray
Prairie Grass
Red Rock
Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
*Visit andersenwindows.com/warranty or contact your Andersen supplier for details on the 400/200 Series Limited Warranty. Dimensions in parentheses are in millimeters.
216
Cocoa Bean
Black
EXTERIOR TRIM
HEAD TRIM OPTIONS Head Trim Profiles Three styles are available. All can be used with our flat trim and include an integrated nailing flange. The decorative drip cap is made from our cellular Fibrex® material. Both the 2" (51) cornice and 3 5⁄8" (92) cornice are made from highly durable urethane material.
DECORATIVE DRIP CAP
Red Rock trim with Sandtone window
2" (51) CORNICE Red Rock trim with Sandtone window
3 5/8" (92) CORNICE Red Rock trim with Sandtone window
OTHER TRIM OPTIONS
Made of highly durable factory-finished urethane material for selected curved shapes. Contact your Andersen supplier for availability.
3 ½" (89) Flat Cellular Fibrex ® Trim Board
⁄ " (19) thick in 10' (3048) lengths and 11 colors. It can be ripped to size and fastened with screws or nails.
34
Coil Stock
Factory-finished in 11 colors, our aluminum coil stock allows you to form your own profiles in the field.
Exterior Trim
Curved Trim
Dimensions in parentheses are in millimeters. Printing limitations prevent exact color duplication. See your Andersen supplier for actual color samples.
217
EXTERIOR TRIM Sill Nose
Trim Options
Sill Detail
Scale 3" (76) = 1'-0" (305) — 1:4
Choose flat trim or brick mould. Sill nose is standard at the sill. 400 Series Tilt-Wash Double-Hung Window
Sill nose with 3 1/2" (89) flat
Attachment
Sill nose, flush at corner,
5 ⁄ 8" (16)
is standard with brick
Field-applied attachment strip fastens to framing through
mould or flat trim.
window or patio door installation flange and flashing tape
Sill Nose
1 1 5 ⁄ 16" (49) 3 ⁄ 16" (5)
Field-Applied Attachment Strip
with screws. Exterior trim connects securely to the 1 7⁄ 8" (48)
field-applied attachment strip. Follow window and patio door installation guides for flashing instructions.
Vertical Section Sill Nose/400 Series Tilt-Wash Double-Hung Window
1 3 ⁄ 8" (35)
End caps are handed as viewed Installation flange
1 3 ⁄ 4" (44)
3 1 ⁄ 2" (89)
Field-applied attachment strip
400 Series Tilt-Wash Double-Hung Window
from the exterior.
Formula for dimension of window plus exterior trim:
Add 1 15 ⁄16" (49) for sill nose
Brick Mould
Head Detail
Scale 3" (76) = 1'-0" (305) — 1:4 1 3 ⁄ 4" (44)
Fastening Corner keys are used at corner joints for Brick mould with mitered corners 2" (51) 1 ⁄ 4" (6)
brick mould. Screws provide secure tight fit at sill
For patio doors,
corner joints.
end caps are used at the sill.
7 ⁄ 16" (11)
Brick Mould
400 Series Tilt-Wash Double-Hung Window
Vertical Section Brick Mould/400 Series Tilt-Wash Double-Hung Window
End caps are used at corners
Formula for dimension of window/door plus exterior trim:
for flat trim and are handed as
Add 1 3 ⁄4" (44) per side for brick mould
viewed from the exterior. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters. • Typical trim combinations shown. Additional combinations may also be used. Some restrictions apply. For more information contact your local Andersen supplier.
218
EXTERIOR TRIM
Flat
Head Detail
Scale 3" (76) = 1'-0" (305) — 1:4 1 1 ⁄ 2" (38) 1 1 ⁄ 2" (38)
3 1/2" (89) flat with flush corner 4 1 ⁄ 2" (114)
4 1 ⁄ 2" (114) Flat
1 ⁄ 4" (6)
1 ⁄ 4" (6)
3 1 ⁄ 2" (89)
3 1 ⁄ 2" (89) Flat
3 ⁄ 16"
3 ⁄ 16"
(5)
(5)
400 Series Tilt-Wash Double-Hung Window
4 1/2" (114) flat with flush corner
400 Series Tilt-Wash Double-Hung Window
Vertical Section
Vertical Section
3 1 ⁄ 2" (89) Flat/400 Series Tilt-Wash Double-Hung Window
4 1 ⁄ 2" (114) Flat/400 Series Tilt-Wash Double-Hung Window
For patio doors, end caps are used at the sill. Formulas for dimension of window/door plus exterior trim:
Add 4 1 ⁄4" (108) per side for 4 1 ⁄ 2" (114) flat Add 3 1 ⁄4" (83) per side for 3 1 ⁄ 2" (89) flat
Separate Rough Openings Detail
Exterior Trim
Mull Cover
Scale 3" (76) = 1'-0" (305) — 1:4
3 3 ⁄4" (95) mull cover is available for
3 ⁄ 8" (10)
installations where windows or patio doors
3" (76)
3 ⁄ 8" (10)
have been installed into separate rough openings to obtain a joined appearance.
For patio doors,
3 3 ⁄4" (95) Mull Cover
end caps are used at the sill.
400 Series Double-Hung Window
400 Series Double-Hung Window
4 1 ⁄4" (108)
Horizontal Section 400 Series Double-Hung Window/Mull Cover/400 Series Double-Hung Window
• Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. • Dimensions in parentheses are in millimeters. • Typical trim combinations shown. Additional combinations may also be used. Some restrictions apply. For more information contact your local Andersen supplier.
219
EXTERIOR TRIM Cornices
Head Details
Scale 3" (76) = 1'-0" (305) — 1:4 4 1 ⁄ 16" (103)
For windows or doors, use cornice with 3 1/2" (89)
3 5 ⁄ 8" (92)
or 4 1/2" (114) flat.
(3)
1 ⁄ 8"
Flange
3 5 ⁄ 8" (92) Cornice
5 ⁄ 16"
(8)
5 ⁄ 16"
(8)
3 5 /8" (92) cornice with 3 1/2" (89) flat
1 ⁄ 8"
(3)
2 9 ⁄ 16" (68)
400 Series Tilt-Wash Double-Hung Window
Vertical Section 3 5 ⁄ 8" (92) Cornice/3 1 ⁄ 2" (89) Flat/400 Series Tilt-Wash Double-Hung Window Flange
2" (51)
2" (51) cornice with 4 1/2" (114) flat
3 1 ⁄ 4" (83)
(3)
1 ⁄ 8"
2" (51) Cornice
5 ⁄ 16"
(8)
Decorative Drip Cap 1 ⁄ 8"
(3)
For windows or doors, use
400 Series Tilt-Wash Double-Hung Window
2" (51)
decorative drip cap with 3 1/2" (89) or 4 1/2" (114) flat.
Vertical Section 2" (51) Cornice/3 1 ⁄ 2" (89) Flat/400 Series Tilt-Wash Double-Hung Window
2 1 ⁄ 4" (57)
Integrated Flange
15 ⁄ 16"
Decorative Drip Cap
(24)
1 ⁄ 4" (6)
Decorative drip cap with 3 1/2" (89) flat 3 ⁄ 4" (19)
• Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters. • Typical trim combinations shown. Additional combinations may also be used. Some restrictions apply. For more information contact your local Andersen supplier.
220
400 Series Tilt-Wash Double-Hung Window
15 ⁄ 16"
(24)
Vertical Section Decorative Drip Cap/3 1 ⁄ 2" (89) Flat/400 Series Tilt-Wash Double-Hung Window
220
200 Series Tilt-Wash Double-Hung Windows
TILT-WASH DOUBLE-HUNG WINDOWS
SECTION REFERENCE Tables of Sizes ....................223-224 Specifications .....................224-225 Grille Patterns ............................ 225 Window Details .......................... 226 Joining Details............................ 226 Combination Designs ................. 255 Performance Data ...................... 269 Warranty .............................290-291
TILT-WASH DOUBLE-HUNG WINDOWS FEATURES
ACCESSORIES Sold Separately
D
E
Frame A Exterior outer frame members are
A
F
treated with water-repellent preservative and covered with a rigid vinyl cover, minimizing maintenance and providing an attractive appearance. B
Insect Screens
Extension Jambs
Insect Screen Frames
Standard jamb depth is 3 1/4" (83). Extension jambs are available in unfinished pine or prefinished White. Some sizes may be veneered.
B Interior surfaces are
Factory-applied and non-applied extension jambs are available in 1⁄16" (1.5) increments between 4 9⁄16" (114) and 7 1⁄8" (181). Extension jambs can be factory-applied to either three sides (stool and apron) or four sides (picture frame casing).
unfinished pine. Low-maintenance prefinished White interiors are available. C
C Full-perimeter installation flange makes installation easy and fast with little or no adjustment. It’s fixed, seamless and integrated with the exterior frame.
Frame
Sash
Drywall Return
D Flexible weatherstripping around all
The 200 Series double-hung window is available with a narrow 3" (76) jamb depth with a flat interior surface for easy drywall return. Available in prefinished White only.
four sides is factory-installed and provides a tight seal between the sash and frame.
Glass E Choose Low-E, Low-E HeatLock™,
Two-Tone Option
Low-E SmartSun™, Low-E SmartSun™ HeatLock™ or dual-pane glass. Tempered glass and other glass options are available. Contact your Andersen supplier. A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite.
F A rigid vinyl glazing bead, combined with high-grade silicone glazing bed, keeps the glass bonded firmly to the sash and helps minimize water and air infiltration.
A convenient tilt-wash design makes it easy to clean the window from the inside. An in-sash balancer minimizes the view of the jamb liner, maximizing the amount of wood in the frame. Window can be secured through the side jambs to stud walls without hitting balancer.
200 Series tilt-wash double-hung windows are available with a two-tone color configuration, featuring a prefinished White interior and a Sandtone exterior. Some exterior components are visible from the interior. Corresponding picture and transom units, as well as grilles, are available to match. Window Opening Control Device Kit
Choose full insect screen or half insect screen. Half insect screen (shown above) allows ventilation without affecting the view from the upper sash. Frames are available in colors to match product exteriors. TruScene® Insect Screen Exclusive Andersen® TruScene® insect screens provide over 50% more clarity than our conventional insect screens for a beautiful unobstructed view. They allow more fresh air and sunlight in, while doing a better job of keeping out small insects. Conventional Insect Screen Conventional insect screens have a longlasting* fiberglass screen mesh with a charcoal finish.
Exterior Trim
EXTERIOR
White
Sandtone
INTERIOR
Pine
White
HARDWARE FINISHES
Black
Bright Brass
Gold Dust
Oil Rubbed Satin Bronze Nickel
Stone
White
Antique Brass
This product is available with Andersen® Exterior Trim. See pages 215-220 for details.
A Window Opening Control Device Kit is available, which limits sash travel to less than 4" (102) when the window is first opened. Available in Stone and White. Device shown on 400 Series Tilt-Wash double-hung window.
Naturally occurring variations in grain, color and texture of wood make each window one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified. Oil rubbed bronze is a "living" finish that will change with time and use.
DOUBLE-HUNG HARDWARE OPTIONS CLASSIC SERIES™ LIFT **
LOCK & KEEPER
Antique Brass | Black | Bright Brass Gold Dust | Oil Rubbed Bronze Satin Nickel | Stone | White
Stone | White
Bold name denotes finish shown. * Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 200 Series Limited Warranty. ** Hardware sold separately. Dimensions in parentheses are in millimeters. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
222
CAUTION: • Painting and staining may cause damage to rigid vinyl. • 200 Series windows in Sandtone color may be painted any color lighter than Sandtone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Sandtone any color darker than Sandtone. • Do not paint 200 Series windows with White exteriors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
For more information about glass, grilles and TruScene® insect screen see pages 10-16. For more information about combination designs, product performance, installation accessories and warranty see pages 255-291 or visit
andersenwindows.com
Table of Tilt-Wash Transom and Double-Hung Window Sizes
Table of Tilt-Wash Half Circle Window Sizes Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96
3'-3 1 ⁄ 2"
(495)
(597)
(699)
(800)
(902)
(1003)
Minimum Rough Opening
1'-8" (508)
2'-0" (610)
2'-4" (711)
2'-8" (813)
3'-0" (914)
3'-4" (1016)
Unobstructed Glass (lower sash only)
13 1 ⁄ 2" (343)
17 1 ⁄ 2" (445)
21 1 ⁄ 2" (546)
25 1 ⁄ 2" (648)
29 1 ⁄ 2" (749)
33 1 ⁄ 2" (851)
244CT18
244CT20
244CT24
244CT28
244CT30
244CT34
Unobstructed Glass
13 1 ⁄ 2" (343)
17 1 ⁄ 2" (445)
244CT18
244CT20
2'-3 1 ⁄ 2" (699)
2'-7 1 ⁄ 2" (800)
2'-4" (711)
2'-8" (813)
21 1 ⁄ 2" (546)
25 1 ⁄ 2" (648)
244DH3430
1'-0 5 ⁄ 8" (321)
244DH1830 244DH2030 244DH2430 244DH2830 244DH3030
1'-7 1 ⁄ 8" (486)
244FX3420
1'-6 5 ⁄ 8" (473)
244FX3416
22 11 ⁄ 16" (576)
3'-0" (914)
3'-4" (1016)
29 1 ⁄ 2" (749)
33 1 ⁄ 2" (851) 1'-4 5 ⁄ 8" (422)
244DH3446
3'-3 1 ⁄ 2" (1003)
1'-11 1 ⁄ 8" (587)
244DH1846 244DH2046 244DH2446 244DH2846 244DH3046
2'-11 1 ⁄ 2" (902)
1'-2 5 ⁄ 8" (371)
244DH3440 1'-8 5 ⁄ 8" (524)
244DH1840 244DH2040 244DH2440 244DH2840 244DH3040
1'-9 1 ⁄ 8" (537)
19 11 ⁄ 16" (500)
244DH3436
244CT28
1'-10 5 ⁄ 8" (575)
16 11 ⁄ 16" (424)
244CT24
244DH1849 244DH2049 244DH2449 244DH2849 244DH3049◊ 244DH3449◊
244CT30
244CT34
Grille patterns shown
200 Series Tilt-Wash Double-Hung Windows
on page 225.
25 11 ⁄ 16" (652)
5'-0" (1524)
2'-0" (610)
24 3 ⁄ 16" (614)
4'-0" (1219) 4'-6" (1372) 4'-9" (1448)
3'-11 1 ⁄ 2" (1207) 4'-5 1 ⁄ 2" (1359) 4'-8 1 ⁄ 2" (1435)
1'-8" (508)
244FX3410
244FX1820 244FX2020 244FX2420 244FX2820 244FX3020
244DH1836 244DH2036 244DH2436 244DH2836 244DH3036
4'-11 1 ⁄ 2" (1511)
Minimum Rough Opening
10 5 ⁄ 8" (270)
244FX1816 244FX2016 244FX2416 244FX2816 244FX3016
1'-11 1 ⁄ 2" (597)
1'-5 1 ⁄ 8" (435)
5 1 ⁄ 2" (140) 11 1 ⁄ 2" (292)
244FX1810 244FX2010 244FX2410 244FX2810 244FX3010
13 11 ⁄ 16" (348)
17 1 ⁄ 2" (445)
1'-0" (305) 1'-6" (457) 3'-6" (1067)
3'-0" (914)
2'-0" (610)
11 1 ⁄ 2" (292) 3'-5 1 ⁄ 2" (1054)
2'-11 1 ⁄ 2" 1'-11 1 ⁄ 2" (902) (597)
1'-5 1 ⁄ 2" (445)
See Half Circle chart
1'-7 1 ⁄ 2" (495)
Window Dimension
1'-4 5 ⁄ 8" (422)
Window Dimension
8 5 ⁄ 8" (219)
2'-11 1 ⁄ 2"
1'-3 1 ⁄ 8" (384)
2'-7 1 ⁄ 2"
1'-2 5 ⁄ 8" (371)
2'-3 1 ⁄ 2"
6 5 ⁄ 8" (168)
1'-11 1 ⁄ 2"
1'-1 1 ⁄ 8" (333)
1'-7 1 ⁄ 2"
1'-0 5 ⁄ 8" (321)
Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96
28 11 ⁄ 16" (729)
5'-6" (1676)
5'-5 1 ⁄ 2" (1664)
244DH1850 244DH2050 244DH2450 244DH2850 244DH3050◊ 244DH3450◊
31 11 ⁄ 16" (805)
6'-0" (1829)
5'-11 1 ⁄ 2" (1816)
244DH1856 244DH2056 244DH2456 244DH2856◊ 244DH3056◊ 244DH3456◊
244DH1860 244DH2060 244DH2460 244DH2860◊ 244DH3060◊ 244DH3460◊
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. ◊Meet or exceed clear opening area of 5.7 sq. ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610). See table on page 225.
223
TILT-WASH DOUBLE-HUNG WINDOWS TableTable of Tilt-Wash Picture Window SizesSizes of Tilt-Wash Picture Window 1 ⁄ 8" (3) 1 ⁄ 8= ScaleScale 1'-0" (305)(305) — 1:96 " (3) = 1'-0" — 1:96
4'-5 1 ⁄ 24'-5 " 1 ⁄ 2" (1359)(1359)
4'-8 1 ⁄ 24'-8 " 1 ⁄ 2" (1435)(1435)
⁄ 2" 1 ⁄ 2" 4'-11 1 4'-11 (1511)(1511)
5'-5 1 ⁄ 25'-5 " 1 ⁄ 2" (1663)(1663)
⁄ 2" 1 ⁄ 2" 5'-11 1 5'-11 (1816)(1816)
4'-0" 4'-0" (1219)(1219)
4'-6" 4'-6" (1372)(1372)
4'-9" 4'-9" (1448)(1448)
5'-0" 5'-0" (1524)(1524)
5'-6" 5'-6" (1676)(1676)
6'-0" 6'-0" (1829)(1829)
Unobstructed Glass Glass 29 1 ⁄ 2"29 1 ⁄ 2" 41 1 ⁄ 2" 41 1 ⁄ 2" Unobstructed (749) (749) (1054)(1054)
47 1 ⁄ 2" 47 1 ⁄ 2" (1207)(1207)
50 1 ⁄ 2"50 1 ⁄ 2" (1283)(1283)
53 1 ⁄ 2"53 1 ⁄ 2" (1359)(1359)
59 1 ⁄ 2"59 1 ⁄ 2" (1511)(1511)
65 1 ⁄ 2"65 1 ⁄ 2" (1664)(1664)
244FX5630 244FX5630
244FX6030 244FX6030
244FX5640 244FX5640
244FX6040 244FX6040
244FX5646 244FX5646
244FX6046 244FX6046
244FX5649 244FX5649
244FX6049 244FX6049
244FX5650 244FX5650
244FX6050 244FX6050
⁄ 2" 1 ⁄ 2" ⁄ 2" 1 ⁄ 2"3'-11 1 3'-11 2'-11 1 2'-11 WindowWindow Dimension Dimension (902) (902) (1207)(1207) 3'-0" 3'-0" (914) (914)
2'-11 1 ⁄ 2" (902) 2'-11 1 ⁄ 2" 3'-0" (902) (914) 3'-0" 29 1 ⁄ 2" (914) (749) 29 1 ⁄ 2" (749)
Minimum Minimum Rough Opening Rough Opening
Grille patterns shownshown Grille patterns on page on 225. page 225.
3'-11 1 ⁄ 2" (1207) 3'-11 1 ⁄ 2" 4'-0" (1207) (1219) 4'-0" 41 1 ⁄ 2" (1219) (1054) 41 1 ⁄ 2" (1054)
244FX4030 244FX3030 244FX5030 244FX4930 244FX5030 244FX4030244FX4630 244FX4630 244FX4930 244FX3030
4'-5 1 ⁄ 2" (1359) 4'-5 1 ⁄ 2" 4'-6" (1359) (1372) 4'-6" 47 1 ⁄ 2" (1372) (1207) 47 1 ⁄ 2" (1207)
244FX4040 244FX3040 244FX5040 244FX4940 244FX5040 244FX4040244FX4640 244FX4640 244FX4940 244FX3040
4'-8 1 ⁄ 2" (1435) 4'-8 1 ⁄ 2" 4'-9" (1435) (1448) 4'-9" 50 1 ⁄ 2" (1448) (1283) 50 1 ⁄ 2" (1283)
244FX4046 244FX3046 244FX5046 244FX4946 244FX5046 244FX4046244FX4646 244FX4646 244FX4946 244FX3046
4'-11 1 ⁄ 2" (1511) 4'-11 1 ⁄ 2" 5'-0" (1511) (1524) 5'-0" 53 1 ⁄ 2" (1524) (1359) 53 1 ⁄ 2" (1359)
244FX3049 244FX4049 244FX4649 244FX4949 244FX3049 244FX5049 244FX4949 244FX5049 244FX4049244FX4649
5'-5 1 ⁄ 2" (1664) 5'-5 1 ⁄ 2" 5'-6" (1664) (1676) 5'-6" 59 1 ⁄ 2" (1676) (1511) 59 1 ⁄ 2" (1511)
244FX4050 244FX3050 244FX5050 244FX4950 244FX5050 244FX4050244FX4650 244FX4650 244FX4950 244FX3050
5'-11 1 ⁄ 2" (1816) 5'-11 1 ⁄ 2" 6'-0" (1816) (1829) 6'-0" 65 1 ⁄ 2" (1829) (1664) 65 1 ⁄ 2" (1664)
244FX4056 244FX3056 244FX5056 244FX4956 244FX5056 244FX4056244FX4656 244FX4656 244FX4956 244FX3056
244FX4060 244FX3060 244FX4960 244FX5060 244FX4060244FX4660 244FX4660 244FX4960 244FX3060 244FX5060
• "Window Dimension" always refers outside • "Window Dimension" alwaystorefers to outside frame toframe frametodimension. frame dimension. • "Minimum Rough Opening" dimensions • "Minimum Rough Opening" dimensions may need to need be increased to allowtoforallow use for use may to be increased of building wraps, flashing, sill panning, of building wraps, flashing, sill panning, brackets, fasteners or otheroritems. pages brackets, fasteners otherSee items. See pages 288-289288-289 for morefordetails. more details. • Dimensions in parentheses are in millimeters. • Dimensions in parentheses are in millimeters.
Picture Window Area Specifications Tilt-Wash Picture Window Area Specifications Picture Window Area Specifications Tilt-Wash Picture Window Area Specifications Tilt-Wash Picture Window Area Specifications Tilt-Wash Tilt-Wash Picture Window Area Specifications Tilt-Wash Glass Glass Overall Overall WindowWindow Area Area Area Area 2) 2 Sq. Ft./(m Sq. Ft./(m Sq. Ft./(m ) Sq.2)Ft./(m2)
Glass Glass Overall Overall WindowWindow Area Area Area Area 2) 2 Sq. Ft./(m Sq. Ft./(m Sq. Ft./(m ) Sq.2)Ft./(m2)
WindowWindow NumberNumber
244FX3030 244FX3030
6.04
(0.56) (0.56) 8.75 6.04
(0.81) (0.81) 8.75
244FX4640 244FX4640
13.69 13.69 (1.27) (1.27) 17.65 17.65 (1.64) (1.64)
244FX5046 244FX5046
17.65 17.65 (1.64) (1.64) 22.11 22.11 (2.05) (2.05)
244FX3040 244FX3040
8.50
(0.79) (0.79) 11.71 11.71 (1.09) (1.09) 8.50
244FX4646 244FX4646
15.67 15.67 (1.46) (1.46) 19.88 19.88 (1.85) (1.85)
244FX5049 244FX5049
18.76 18.76 (1.74) (1.74) 23.35 23.35 (2.17) (2.17)
244FX3046 244FX3046
9.73
(0.90) (0.90) 13.19 13.19 (1.23) (1.23) 9.73
244FX4649 244FX4649
16.66 16.66 (1.55) (1.55) 21.00 21.00 (1.95) (1.95)
244FX5050 244FX5050
19.88 19.88 (1.85) (1.85) 24.59 24.59 (2.28) (2.28)
244FX3049 244FX3049
10.35 10.35 (0.96) (0.96) 13.93 13.93 (1.29) (1.29)
244FX4650 244FX4650
17.65 17.65 (1.64) (1.64) 22.11 22.11 (2.05) (2.05)
244FX5056 244FX5056
22.11 22.11 (2.05) (2.05) 27.06 27.06 (2.51) (2.51)
244FX3050 244FX3050
10.96 10.96 (1.02) (1.02) 14.67 14.67 (1.36) (1.36)
244FX4656 244FX4656
19.63 19.63 (1.82) (1.82) 24.34 24.34 (2.26) (2.26)
244FX5060 244FX5060
24.34 24.34 (2.26) (2.26) 29.54 29.54 (2.75) (2.75)
244FX3056 244FX3056
12.19 12.19 (1.13) (1.13) 16.15 16.15 (1.50) (1.50)
244FX4660 244FX4660
21.61 21.61 (2.01) (2.01) 26.56 26.56 (2.47) (2.47)
244FX5630 244FX5630
12.19 12.19 (1.13) (1.13) 16.15 16.15 (1.50) (1.50)
244FX3060 244FX3060
13.42 13.42 (1.25) (1.25) 17.63 17.63 (1.64) (1.64)
244FX4930 244FX4930
10.35 10.35 (0.96) (0.96) 13.93 13.93 (1.29) (1.29)
244FX5640 244FX5640
17.15 17.15 (1.59) (1.59) 21.61 21.61 (2.01) (2.01)
(0.79) (0.79) 11.71 11.71 (1.09) (1.09) 8.50
244FX4940 244FX4940
14.55 14.55 (1.35) (1.35) 18.64 18.64 (1.73) (1.73)
244FX5646 244FX5646
19.63 19.63 (1.82) (1.82) 24.34 24.34 (2.26) (2.26)
244FX4040 244FX4040
11.96 11.96 (1.11) (1.11) 15.67 15.67 (1.46) (1.46)
244FX4946 244FX4946
16.66 16.66 (1.55) (1.55) 21.00 21.00 (1.95) (1.95)
244FX5649 244FX5649
20.87 20.87 (1.94) (1.94) 25.70 25.70 (2.39) (2.39)
244FX4046 244FX4046
13.69 13.69 (1.27) (1.27) 17.65 17.65 (1.64) (1.64)
244FX4949 244FX4949
17.71 17.71 (1.65) (1.65) 22.17 22.17 (2.06) (2.06)
244FX5650 244FX5650
22.11 22.11 (2.05) (2.05) 27.06 27.06 (2.51) (2.51)
244FX4049 244FX4049
14.55 14.55 (1.35) (1.35) 18.64 18.64 (1.73) (1.73)
244FX4950 244FX4950
18.76 18.76 (1.74) (1.74) 23.35 23.35 (2.17) (2.17)
244FX6030 244FX6030
13.42 13.42 (1.25) (1.25) 17.63 17.63 (1.64) (1.64)
244FX4050 244FX4050
15.42 15.42 (1.43) (1.43) 19.63 19.63 (1.82) (1.82)
244FX4956 244FX4956
20.87 20.87 (1.94) (1.94) 25.70 25.70 (2.39) (2.39)
244FX6040 244FX6040
18.88 18.88 (1.75) (1.75) 23.59 23.59 (2.19) (2.19)
244FX4056 244FX4056
17.15 17.15 (1.59) (1.59) 21.61 21.61 (2.01) (2.01)
244FX4960 244FX4960
22.97 22.97 (2.13) (2.13) 28.05 28.05 (2.61) (2.61)
244FX6046 244FX6046
21.61 21.61 (2.01) (2.01) 26.56 26.56 (2.47) (2.47)
244FX4060 244FX4060
18.88 18.88 (1.75) (1.75) 23.59 23.59 (2.19) (2.19)
244FX5030 244FX5030
10.96 10.96 (1.02) (1.02) 14.67 14.67 (1.36) (1.36)
244FX6049 244FX6049
22.97 22.97 (2.13) (2.13) 28.05 28.05 (2.61) (2.61)
244FX5040 244FX5040
15.42 15.42 (1.43) (1.43) 19.63 19.63 (1.82) (1.82)
244FX6050 244FX6050
24.34 24.34 (2.26) (2.26) 29.54 29.54 (2.75) (2.75)
244FX4030 244FX4030
244FX4630 244FX4630
8.50
9.73
(0.90) (0.90) 13.19 13.19 (1.23) (1.23) 9.73
Glass Glass Overall Overall WindowWindow Area Area Area Area 2) 2 Sq. Ft./(m Sq. Ft./(m Sq. Ft./(m ) Sq.2)Ft./(m2)
WindowWindow NumberNumber
WindowWindow NumberNumber
• Dimensions in parentheses are in square • Dimensions in parentheses are inmeters. square meters.
224
Tilt-Wash Transom Window Specifications
Clear Opening in Full Open Position Window Number
Clear Opening Area Sq. Ft./(m2)
Width Inches/(mm)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Area Sq. Ft./(m2)
Top of Subfloor to Top of Inside Sill Stop Inches/(mm)
Overall Window Area Sq. Ft./(m2)
Window Number
Glass Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2)
244DH1830
1.72
(0.16)
16.56"
(421)
14.95"
(380)
2.56
(0.24)
1.72
(0.16)
48.56"
(1233)
4.81
(0.45)
244FX1810
0.52
(0.05)
1.56
(0.15)
244DH1836
2.06
(0.19)
16.56"
(421)
17.95"
(456)
3.12
(0.29)
2.06
(0.19)
42.56"
(1081)
5.62
(0.52)
244FX1816
1.08
(0.10)
2.37
(0.22)
244DH1840
2.41
(0.22)
16.56"
(421)
20.95"
(532)
3.69
(0.34)
2.41
(0.22)
36.56"
(929)
6.43
(0.60)
244FX1820
1.64
(0.15)
3.18
(0.30)
244DH1846
2.75
(0.26)
16.56"
(421)
23.95"
(608)
4.25
(0.40)
2.75
(0.26)
30.56"
(776)
7.24
(0.67)
244FX2010
0.67
(0.06)
1.88
(0.17)
244DH1849
2.93
(0.27)
16.56"
(421)
25.45"
(647)
4.53
(0.42)
2.93
(0.27)
27.56"
(700)
7.65
(0.71)
244FX2016
1.40
(0.13)
2.86
(0.27)
244DH1850
3.10
(0.29)
16.56"
(421)
26.95"
(685)
4.81
(0.45)
3.10
(0.29)
24.56"
(624)
8.06
(0.75)
244FX2020
2.13
(0.20)
3.84
(0.36)
244DH1856
3.44
(0.32)
16.56"
(421)
29.95"
(761)
5.37
(0.45)
3.44
(0.32)
18.56"
(471)
8.87
(0.82)
244FX2410
0.82
(0.08)
2.20
(0.20)
244DH1860
3.79
(0.35)
16.56"
(421)
32.95"
(837)
5.94
(0.55)
3.79
(0.35)
12.56"
(319)
9.68
(0.90)
244FX2416
1.72
(0.16)
3.34
(0.31)
244DH2030
2.14
(0.20)
20.56"
(522)
14.95"
(380)
3.32
(0.31)
2.14
(0.20)
48.56"
(1233)
5.79
(0.54)
244FX2420
2.61
(0.24)
4.49
(0.42)
244DH2036
2.56
(0.24)
20.56"
(522)
17.95"
(456)
4.05
(0.38)
2.56
(0.24)
42.56"
(1081)
6.77
(0.63)
244FX2810
0.97
(0.09)
2.52
(0.23)
244DH2040
2.99
(0.28)
20.56"
(522)
20.95"
(532)
4.78
(0.44)
2.99
(0.28)
36.56"
(929)
7.75
(0.72)
244FX2816
2.04
(0.19)
3.83
(0.36)
244DH2046
3.42
(0.32)
20.56"
(522)
23.95"
(608)
5.51
(0.51)
3.42
(0.32)
30.56"
(776)
8.73
(0.81)
244FX2820
3.10
(0.29)
5.14
(0.48)
244DH2049
3.63
(0.34)
20.56"
(522)
25.45"
(647)
5.88
(0.55)
3.63
(0.34)
27.56"
(700)
9.22
(0.86)
244FX3010
1.13
(0.11)
2.84
(0.26)
244DH2050
3.85
(0.36)
20.56"
(522)
26.95"
(685)
6.24
(0.58)
3.85
(0.36)
24.56"
(624)
9.71
(0.90)
244FX3016
2.36
(0.22)
4.31
(0.40)
244DH2056
4.28
(0.40)
20.56"
(522)
29.95"
(761)
6.97
(0.65)
4.28
(0.40)
18.56"
(471)
10.69
(0.99)
244FX3020
3.59
(0.33)
5.79
(0.54)
244DH2060
4.71
(0.44)
20.56"
(522)
32.95"
(837)
7.70
(0.72)
4.71
(0.44)
12.56"
(319)
11.67
(1.08)
244FX3410
1.28
(0.12)
3.15
(0.29)
244DH2430
2.55
(0.24)
24.56"
(624)
14.95"
(380)
4.08
(0.38)
2.55
(0.24)
48.56"
(1233)
6.78
(0.63)
244FX3416
2.68
(0.25)
4.80
(0.45)
244DH2436
3.06
(0.28)
24.56"
(624)
17.95"
(456)
4.98
(0.46)
3.06
(0.28)
42.56"
(1081)
7.93
(0.74)
244FX3420
4.07
(0.38)
6.45
(0.60)
244DH2440
3.57
(0.33)
24.56"
(624)
20.95"
(532)
5.88
(0.55)
3.57
(0.33)
36.56"
(929)
9.07
(0.84)
244DH2446
4.09
(0.38)
24.56"
(624)
23.95"
(608)
6.77
(0.63)
4.09
(0.38)
30.56"
(776)
10.22
(0.95)
244DH2449
4.34
(0.40)
24.56"
(624)
25.45"
(647)
7.22
(0.67)
4.34
(0.40)
27.56"
(700)
10.79
(1.00)
244DH2450
4.60
(0.43)
24.56"
(624)
26.95"
(685)
7.67
(0.71)
4.60
(0.43)
24.56"
(624)
11.36
(1.06)
244DH2456
5.11
(0.48)
24.56"
(624)
29.95"
(761)
8.56
(0.80)
5.11
(0.48)
18.56"
(471)
12.51
(1.16)
244DH2460
5.62
(0.52)
24.56"
(624)
32.95"
(837)
9.46
(0.88)
5.62
(0.52)
12.56"
(319)
13.65
(1.27)
244DH2830
2.97
(0.28)
28.56"
(725)
14.95"
(380)
4.84
(0.45)
2.97
(0.28)
48.56"
(1233)
7.77
(0.72)
244CT18
0.50
(0.05)
1.43
(0.13)
244DH2836
3.56
(0.33)
28.56"
(725)
17.95"
(456)
5.91
(0.55)
3.56
(0.33)
42.56"
(1081)
9.08
(0.91)
244CT20
0.84
(0.08)
1.98
(0.18)
244DH2840
4.16
(0.39)
28.56"
(725)
20.95"
(532)
6.97
(0.65)
4.16
(0.39)
36.56"
(929)
10.39
(0.97)
244CT24
1.26
(0.12)
2.61
(0.24)
244DH2846
4.75
(0.44)
28.56"
(725)
23.95"
(608)
8.03
(0.75)
4.75
(0.44)
30.56"
(776)
11.70
(1.09)
244CT28
1.77
(0.16)
3.33
(0.31)
244DH2849
5.05
(0.47)
28.56"
(725)
25.45"
(647)
8.56
(0.80)
5.05
(0.47)
27.56"
(700)
12.36
(1.15)
244CT30
2.37
(0.22)
4.15
(0.39)
244DH2850
5.35
(0.50)
28.56"
(725)
26.95"
(685)
9.09
(0.84)
5.35
(0.50)
24.56"
(624)
13.02
(1.21)
244CT34
3.06
(0.28)
5.04
(0.47)
244DH2856 ◊
5.94
(0.55)
28.56"
(725)
29.95"
(761)
10.16
(0.94)
5.94
(0.55)
18.56"
(471)
14.33
(1.33)
244DH2860 ◊
6.54
(0.61)
28.56"
(725)
32.95"
(837)
11.22
(1.04)
6.54
(0.61)
12.56"
(319)
15.64
(1.45)
244DH3030
3.38
(0.31)
32.56"
(827)
14.95"
(380)
5.60
(0.52)
3.38
(0.31)
48.56"
(1233)
8.75
(0.81)
244DH3036
4.06
(0.38)
32.56"
(827)
17.95"
(456)
6.83
(0.64)
4.06
(0.38)
42.56"
(1081)
10.23
(0.95)
244DH3040
4.74
(0.44)
32.56"
(827)
20.95"
(532)
8.06
(0.75)
4.74
(0.44)
36.56"
(929)
11.71
(1.09)
244DH3046
5.42
(0.50)
32.56"
(827)
23.95"
(608)
9.29
(0.86)
5.42
(0.50)
30.56"
(776)
13.19
(1.23)
244DH3049 ◊
5.76
(0.54)
32.56"
(827)
25.45"
(647)
9.91
(0.92)
5.76
(0.54)
27.56"
(700)
13.93
(1.29)
244DH3050 ◊
6.09
(0.57)
32.56"
(827)
26.95"
(685)
10.52
(0.98)
6.09
(0.57)
24.56"
(624)
14.67
(1.36)
244DH3056 ◊
6.77
(0.63)
32.56"
(827)
29.95"
(761)
11.75
(1.09)
6.77
(0.63)
18.56"
(471)
16.15
(1.50)
244DH3060 ◊
7.45
(0.69)
32.56"
(827)
32.95"
(837)
12.98
(1.21)
7.45
(0.69)
12.56"
(319)
17.63
(1.64)
244DH3430
3.80
(0.35)
36.56"
(929)
14.95"
(380)
6.36
(0.59)
3.80
(0.35)
48.56"
(1233)
9.74
(0.91)
244DH3436
4.56
(0.42)
36.56"
(929)
17.95"
(456)
7.76
(0.72)
4.56
(0.42)
42.56"
(1081)
11.38
(1.06)
244DH3440
5.32
(0.49)
36.56"
(929)
20.95"
(532)
9.16
(0.85)
5.32
(0.49)
36.56"
(929)
13.03
(1.21)
244DH3446
6.08
(0.57)
36.56"
(929)
23.95"
(608)
10.55
(0.98)
6.08
(0.57)
30.56"
(776)
14.68
(1.36)
244DH3449 ◊
6.46
(0.60)
36.56"
(929)
25.45"
(647)
11.25
(1.05)
6.46
(0.60)
27.56"
(700)
15.50
(1.44)
244DH3450 ◊
6.84
(0.64)
36.56"
(929)
26.95"
(685)
11.95
(1.11)
6.84
(0.64)
24.56"
(624)
16.32
(1.52)
244DH3456 ◊
7.61
(0.71)
36.56"
(929)
29.95"
(761)
13.34
(1.24)
7.61
(0.71)
18.56"
(471)
17.97
(1.67)
244DH3460 ◊
8.37
(0.78)
36.56"
(929)
32.95"
(837)
14.74
(1.37)
8.37
(0.78)
12.56"
(319)
19.61
(1.82)
Tilt-Wash Half Circle Area Specifications Window Number
Glass Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2)
• Dimensions in parentheses are in square meters.
• "Top of Subfloor to Top of Inside Sill Stop" is calculated based upon a structural header height of 6'-10 1/2" (2096). • Dimensions in parentheses are in millimeters or square meters. ◊ Meet or exceed clear opening area of 5.7 sq. ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610).
Grille Patterns Prairie A
Colonial
Prairie A
Sunburst
Colonial
Renaissance
Specified equal light and custom patterns are also available. For more
Tilt-Wash Double-Hung
Tilt-Wash Transom
Tilt-Wash Half Circle
information on divided light see page 11 or visit andersenwindows.com/grilles.
Tilt-Wash Picture
Patterns are available for all units also in upper sash only (USO). Number of lights and overall pattern varies with window size. Patterns are not available in all configurations.
Specified Equal Light Examples
225
200 Series Tilt-Wash Double-Hung Windows
Tilt-Wash Double-Hung Window Opening and Area Specifications
TILT-WASH DOUBLE-HUNG WINDOWS Tilt-Wash Double-Hung Window Details
Tilt-Wash Picture/Transom Window Details
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
3 1 ⁄ 16"
(33)
(78)
3" (76)
1 5 ⁄ 16"
on
Unit Dimension Height
(17)
1 5 ⁄ 16" (33)
Sill Insect Screen
(37) 1 1 ⁄ 8Drywall " (29) Return
Sill
Drywall Return 1 ⁄ 4" Unit Dimension Width (6) Min. Rough Opening Width
1 ⁄ 4"
(6) 4 1 ⁄ 2" (114)
Head
1 7 ⁄ 8"
Lower Sash
(47)
1 7 ⁄ 8" (47)
1 5 ⁄ 16" (33)
1 1 ⁄ 16" (27)
Jamb
Unobstr. 3" (76) Glass Unit Dimension Width
3" (76)
1 ⁄4"
4 1 ⁄ 2" (114)
(6)
Minimum Rough Opening Width
Jamb 1 ⁄4"
(114) Field Applied Extension Jamb
Jamb
Jamb Unobstr. 3" 3" (76) (76) Glass 1 ⁄4" 4 9 ⁄ 16"Unit 1 ⁄4" (116) Dimension Width (6) (6) Jamb Minimum Rough Opening Width 1 ⁄ 4 2" (114)
1 5 ⁄ 16" Flexible (33) Drip Cap by Others
Clear 1 7 ⁄ 8"Opg. (47)Width
1 1 ⁄ 16" (27)
1 7 ⁄ 8" (47)
Jamb
Vertical 2" 1 1 ⁄ 2" 1 1 ⁄Section (38) (38)
(6)
3 3 ⁄ 16" (81)
1 1 ⁄ 2" (38)
Insect Screen
(6)
1 ⁄ 4"
Unit Dimension Width
(6)
Overall Window Dimension Width
To meet structural requirements or to achieve a
Sum of individual window widths
wider joined appearance, windows may be installed
1 ⁄ 2"
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
into separate rough openings having vertical support
(13) for each join.
(by others) in combination with Andersen® exterior
Overall Rough Opening Width Overall window dimension width plus
Tilt-Wash Half Circle Window Detail
1 ⁄ 2"
(13).
Jamb
4 1 ⁄ 2" (114)
1 ⁄4"
3" Unobstructed 3" Glass (76) (76)
Unit Dimension Height
Jamb
Minimum Rough Opening Height
Drywall Return
1 7 ⁄ 8" (47) Extension Jamb
Exterior Trim Strip
Unit Dim. 1 ⁄ 2"
Jamb
Andersen® Filler and Vinyl Trim Vertical Support by Others
Unit Dim. (13)
Horizontal Section Tilt-Wash Double-Hung to Tilt-Wash Double-Hung
Unit Dim. 2" (51) Unit Dim. Horizontal Section Tilt-Wash Double-Hung and Tilt-Wash Double-Hung
Head 1 7 ⁄ 8" (47) 3 ⁄ 8" (10) 11 ⁄ 16" (17)
(6) Sill Vertical Section
226
Wood Joining Strip
1 5 ⁄ 16" (33)
11 ⁄ 16" (17) 3 ⁄ 8" (10)
filler and exterior vinyl trim.
1 11 ⁄ 16" (43)
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 3 3 ⁄ 16" (81)
1 7 ⁄ 8" (47) 3 ⁄ 8" (10) 11 ⁄ 16" (17)
3" (76) Jamb for Drywall Return
Separate Rough Openings Detail
plus
Horizontal Section
1 5 ⁄ 16" Flexible (33) Drip Cap by Others
Head
Vertical (ribbon) Joining Detail
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Min. Rough Opening Width
1 7 ⁄ 8" (47) Extension Jamb
Sill
Clear Opg. Width 1 ⁄ 4"
11 ⁄ 16" (17) 3 ⁄ 8" (10)
Horizontal Section
Jamb
1 1 ⁄ 2" (38)
1 5 ⁄ 16" (33)
6 9 ⁄ 16" (167) Jamb
Sill Jamb
(47)
For more joining information see the combination designs section starting on page 255. • Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. • Dimensions in parentheses are in millimeters.
Unit Dimension Height
Lower Sash 1 7 ⁄ 8" (47) 1 1 ⁄ 16" (27)
Jamb
Vertical Section
1 ⁄ 2" (13)
4 1 ⁄ 2" (114)
(114)
1 1 ⁄ 16" (27)
3" Unobstructed 3" Glass (76) (76)
Minimum Rough Opening Height
(6)
(27)
1 7 ⁄ 8" (47)
4 1 ⁄ 2"
" 117 ⁄78⁄"16(47)
1 ⁄ 4"
11 ⁄ 16"
(17)
(27)
Flexibl Drip C by Oth
Drywall Return Minimum Rough Opening Height
Lower Sash in Full Open Position
Check Rail
1 ⁄ 2" Head (13) 1 7 ⁄ 8" (47)
11 ⁄ 16"
1 7 ⁄ 8" 3 1 ⁄ 4"
Unit Dimension Height
Clear Opg. Height
Glass Height
(46)
3" Unobstructed 3" Glass (76) (76)
1 13 ⁄ 16"
Unit Dimension Height
3" (76) 2 1 ⁄ 8" Glass (54) Height
Head
1 1 ⁄ 16"
4 1 ⁄ 2" (114)
(44)
1 3 ⁄ 4"
Unit Dimension Height
Minimum Rough Opening Height
1 7 ⁄ 8" (47)
1 1 ⁄ 16"
3" Unobstructed 3" Glass (76) (76)
Drywall Return 1 1 ⁄ 8" (29)
Andersen® Extension Jambs
1 7 ⁄ 16" (37) Drywall Return
Minimum Rough Opening Height
Insect Screen
(6)
3 1 ⁄ 16" (78)
1 5 ⁄ 16" (33)
1 7 ⁄ 16" (37) Minimum Rough Opening Height
1 ⁄ 4"
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
4 1 ⁄ 2" (114)
4 1 ⁄ 2" (114) 3" (76)
1 5 ⁄ 16" (33)
Extension Jamb Details
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
SECTION REFERENCE Tables of Sizes ....................229-230 Specifications ............................ 231 Grille Patterns ............................ 230 Window Details ................... 231-232 Performance Data ...................... 269 Warranty .............................290-291
200 Series Gliding Windows
GLIDING WINDOWS
GLIDING WINDOWS A
FEATURES D
Frame A The exterior of the frame is covered
I
with a seamless rigid vinyl cover to eliminate corner joints/welds and strengthen rigidity. It provides an attractive appearance while minimizing maintenance.
B Laminated veneer lumber frame provides increased rigidity and minimizes racking during installation. It is treated with a water-repellent wood preservative for long-lasting* protection and performance.
C Full-perimeter installation flange
G
E
F H
B
makes installation easy and fast with little or no adjustment. It’s fixed, seamless and totally integrated with the frame for weathertightness.
C
D Flexible weatherstripping around all four sides is factory-installed and provides a tight seal between the sash and frame.
Sash E A polyester stabilized coat with a Flexacron finish is electrostatically applied to penetrate all exterior surfaces for maximum protection and a lustrous finish. ®
F Wood sash members are treated with a water-repellent wood preservative for long-lasting* protection and performance.
G Sash interior surfaces are unfinished pine. Prefinished White interiors are also available.
EXTERIOR
White
H Raised track system makes operation less sensitive to dirt build-up for continually smooth performance.
Glass I Choose Low-E, Low-E HeatLock™, Low-E SmartSun™, Low-E SmartSun™ HeatLock™ or dual-pane glass. Tempered glass and other glass options are available. Contact your Andersen supplier.
ACCESSORIES Sold Separately Frame
Insect Screens
Extension Jambs
Full Insect Screen
Standard jamb depth is 2 3/4" (70). Extension jambs are available in unfinished pine or prefinished White. Some sizes may be veneered.
Full insect screens are available in colors to match product exteriors.
Factory-applied and non-applied extension jambs are available in 1⁄16" (1.5) increments between 4 9⁄16" (114) and 7 1⁄8" (181). Extension jambs can be factory-applied to four sides (picture frame casing).
Exclusive Andersen® TruScene® insect screens provide over 50% more clarity than our conventional insect screens for a beautiful unobstructed view. They allow more fresh air and sunlight in, while doing a better job of keeping out small insects.
Drywall Return
Conventional Insect Screen
The 200 Series gliding window is available with a narrow 2 3/4" (70) jamb depth with a flat interior surface for easy drywall return. Available in prefinished White only.
Conventional insect screens have a long-lasting* fiberglass screen mesh with a charcoal finish.
Two-Tone Option 200 Series gliding windows are available with a two-tone color configuration, featuring a prefinished White interior and a Sandtone exterior. Some exterior components are visible from the interior. Corresponding picture and transom units, as well as grilles, are available to match. Window Opening Control Device Kit
A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite.
HARDWARE FINISHES
Stone
Sandtone
White
TruScene® Insect Screen
A Window Opening Control Device Kit is available, which limits the sash travel to less than 4" (102) when the window is first opened. Available in Stone and White.
Exterior Trim This product is available with Andersen® Exterior Trim. See pages 215-220 for details. CAUTION: • Painting and staining may cause damage to rigid vinyl. • 200 Series windows in Sandtone color may be painted any color lighter than Sandtone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Sandtone any color darker than Sandtone. • Do not paint 200 Series windows with White exteriors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
INTERIOR Naturally occurring variations in grain, color and texture of wood make each window one-of-a-kind. All wood interiors are unfinished unless prefinished White is specified.
Pine
White
GLIDING WINDOW HARDWARE OPTIONS CLASSIC SERIES™ HANDLE
LOCK & KEEPER Stone | White
Stone | White
The standard cam-operated lock & keeper is made for easy operation and long life*. Stone finish is standard with pine interior units and white finish comes with prefinished White interiors.
Sash handles are standard with each unit. Stone finish is standard with pine interior units and white finish comes with prefinished White interiors.
Bold name denotes finish shown. * Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 200 Series Limited Warranty. Dimensions in parentheses are in millimeters. "Flexacron" is a registered trademark of PPG Industries, Inc. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
228
For more information about glass, grilles and TruScene® insect screen see pages 10-16. For more information about product performance, installation accessories and warranty see pages 269-291 or visit
andersenwindows.com
Table of Gliding Window Sizes
Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 Window Dimension Minimum Rough Opening
4'-11 1 ⁄ 2" (1511)
5'-11 1 ⁄ 2" (1816)
3'-0" (914)
4'-0" (1219)
5'-0" (1524)
6'-0" (1829)
13 11 ⁄ 16" (348)
19 11 ⁄ 16" (500)
25 11 ⁄ 16" (652)
31 11 ⁄ 16" (805)
244GW3030 244GW4030
244GW5030◊
244GW6030◊
244GW3036 244GW4036
244GW5036◊
244GW6036◊
244GW3040 244GW4040◊
244GW5040◊
244GW6040◊
244GW4046◊
244GW5046◊
244GW6046◊
244GW4050◊
244GW5050◊
244GW6050◊
11 1 ⁄ 2" (292)
1'-6" (457)
3'-11 1 ⁄ 2" (1207)
17 1 ⁄ 2" (445)
2'-0" (610)
244GW4016
29 1 ⁄ 2" (749)
Active
Stationary
35 1 ⁄ 2" (902)
Viewed from the exterior. Grille patterns shown on
47 1 ⁄ 2" (1207)
41 1 ⁄ 2" (1054)
page 230.
53 1 ⁄ 2" (1359)
4'-6" (1372)
4'-0" (1219)
3'-6" (1067)
3'-0" (914)
244GW3020 244GW4020
5'-0" (1524)
4'-11 1 ⁄ 2" (1511)
4'-5 1 ⁄ 2" (1359)
3'-11 1 ⁄ 2" (1207)
3'-5 1 ⁄ 2" (1054)
2'-11 1 ⁄ 2" (902)
1'-11 1 ⁄ 2" 1'-5 1 ⁄ 2" (597) (445)
Unobstructed Glass (single sash only)
2'-11 1 ⁄ 2" (902)
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. ◊ Meet or exceed clear opening area of 5.7 sq. ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610). See table on page 231.
Lock Handle Location Dimensions shown are from top of lock handle in open position.
GW16 heights Top of Subfloor to Top of Window 6'-10 1 ⁄4" (2089)
1'-4 7 ⁄ 16" (418)
1'-7 1 ⁄4" (489)
GW20 heights GW30 heights
6'-2 1 ⁄ 8" (1883)
5'-11 3 ⁄ 8" (1813)
5'-5 13 ⁄ 16" (1672)
2'-0 13 ⁄ 16" (630)
1'-10" (559) GW36 heights
5'-3" (1600)
GW40 heights
5'-0 1 ⁄4" (1530)
2'-3 9 ⁄ 16" (700)
GW46 heights
4'-9 1 ⁄4" (1454)
200 Series Gliding Windows
10 7 ⁄ 8" (276)
8 1 ⁄ 8" (206)
GW50 heights 4'-6 11 ⁄ 16" (1394)
• Dimensions in parentheses are in millimeters.
229
GLIDING WINDOWS Table of Picture Window Sizes
Scale 1 ⁄ 8" (3) = 1'-0" (305) — 1:96 2'-11 1 ⁄ 2" (902)
3'-11 1 ⁄ 2" (1207)
4'-5 1 ⁄ 2" (1359)
4'-8 1 ⁄ 2" (1435)
4'-11 1 ⁄ 2" (1511)
5'-5 1 ⁄ 2" (1664)
5'-11 1 ⁄ 2" (1816)
Minimum Rough Opening
3'-0" (914)
4'-0" (1219)
4'-6" (1372)
4'-9" (1448)
5'-0" (1524)
5'-6" (1676)
6'-0" (1829)
Unobstructed Glass
29 1 ⁄ 2" (749)
41 1 ⁄ 2" (1054)
47 1 ⁄ 2" (1207)
50 1 ⁄ 2" (1283)
53 1 ⁄ 2" (1359)
59 1 ⁄ 2" (1511)
65 1 ⁄ 2" (1664)
244FX4630
244FX4930
244FX5030
29 1 ⁄ 2" (749)
3'-0" (914)
2'-11 1 ⁄ 2" (902)
Window Dimension
Basic frame dimensions for gliding windows and picture windows are common extension jamb dimensions 244FX4640
244FX4940
244FX5640
244FX5040
244FX6040
[i.e. 4 9 ⁄ 16" (116) or 6 9 ⁄ 16" (167)].
47 1 ⁄ 2" (1207)
Grille patterns shown below.
244FX3046 244FX4046
244FX4646
244FX4946
244FX5046
244FX5646
244FX6046
244FX3050 244FX4050
244FX4650
244FX4950
244FX5050
244FX5650
244FX6050
53 1 ⁄ 2" (1359)
4'-6" (1372) 5'-0" (1524)
4'-5 1 ⁄ 2" (1359)
244FX6030
different. When joining, specify
244FX3040 244FX4040
4'-11 1 ⁄ 2" (1511)
244FX5630
41 1 ⁄ 2" (1054)
4'-0" (1219)
3'-11 1 ⁄ 2" (1207)
244FX3030 244FX4030
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
Grille Patterns Prairie A
Colonial
Modified Colonial
Modified Colonial SCR (Simulated Check Rail)
Tall Fractional
Gliding
Picture
Number of lights and overall pattern varies with window size. Patterns are not available in all configurations. Specified equal light and custom patterns are also available. For more information on divided light see page 11 or visit
Specified Equal Light Examples
andersenwindows.com/grilles.
Custom Pattern Examples
230
Tall Fractional SCR (Simulated Check Rail)
Short Fractional
Short Fractional SCR (Simulated Check Rail)
Gliding Window Opening and Area Specifications
Picture Window Area Specifications
Clear Opening Full Open Position
Top of Subfloor to Top of Inside Sill Stop Inches/(mm)
Window Number
Clear Opening Area Sq. Ft./(m2)
Width Inches/(mm)
244GW3020
2.10
(0.20)
15"
(381)
20 1/8"
(511)
3.32
(0.31)
60 7/16"
(1535)
5.79
244GW3030
3.34
(0.31)
15"
(381)
32 1/8"
(816)
5.60
(0.52)
48 7/16"
(1230)
8.75
244GW3036
3.97
(0.37)
15"
(381)
38 1/8"
(968)
6.74
(0.63)
42 7/16"
(1078)
244GW3040
4.59
(0.43)
15"
(381)
44 1/8"
(1121)
7.88
(0.73)
36 7/16"
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2)
Window Number
Glass Area Sq. Ft./(m2)
Overall Window Area Sq. Ft./(m2)
(0.54)
244FX3030
6.04
(0.56)
8.75
(0.81)
(0.81)
244FX3040
8.50
(0.79)
11.71
(1.09)
10.23
(0.95)
244FX3046
9.73
(0.90)
13.19
(1.23)
(925)
11.71
(1.09)
244FX3050
10.96
(1.02)
14.67
(1.36)
244GW4016
2.06
(0.19)
21"
(533)
14 1/8"
(359)
3.14
(0.29)
66 7/16"
(1687)
5.77
(0.54)
244FX4030
8.50
(0.79)
11.71
(1.09)
244GW4020
2.93
(0.27)
21"
(533)
20 1/8"
(511)
4.78
(0.44)
60 7/16"
(1535)
7.75
(0.72)
244FX4040
11.96
(1.11)
15.67
(1.46)
244GW4030
4.68
(0.44)
21"
(533)
32 1/8"
(816)
8.06
(0.75)
48 7/16"
(1230)
11.71
(1.09)
244FX4046
13.69
(1.27)
17.65
(1.64)
244GW4036
5.56
(0.52)
21"
(533)
38 1/8"
(968)
9.70
(0.90)
42 7/16"
(1078)
13.69
(1.27)
244FX4050
15.42
(1.43)
19.63
(1.82)
244GW4040 ◊
6.43
(0.60)
21"
(533)
44 1/8"
(1120)
11.34
(1.05)
36 7/16"
(925)
15.67
(1.46)
244FX4630
9.73
(0.90)
13.19
(1.23)
244GW4046 ◊
7.31
(0.68)
21"
(533)
50 1/8"
(1273)
12.98
(1.21)
30 7/16"
(773)
17.65
(1.64)
244FX4640
13.69
(1.27)
17.65
(1.64)
244GW4050 ◊
8.18
(0.76)
21"
(533)
56 1/8"
(1425)
14.62
(1.36)
24 7/16"
(620)
19.63
(1.82)
244FX4646
15.67
(1.46)
19.88
(1.85)
244GW5030 ◊
6.02
(0.56)
27"
(686)
32 1/8"
(816)
10.52
(0.98)
48 7/16"
(1230)
14.69
(1.37)
244FX4650
17.65
(1.64)
22.11
(2.05)
244GW5036 ◊
7.14
(0.66)
27"
(686)
38 1/8"
(968)
12.66
(1.18)
42 7/16"
(1078)
17.15
(1.59)
244FX4930
10.35
(0.96)
13.93
(1.29)
244GW5040 ◊
8.27
(0.77)
27"
(686)
44 1/8"
(1121)
14.80
(1.38)
36 7/16"
(925)
19.63
(1.82)
244FX4940
14.55
(1.35)
18.64
(1.73)
244GW5046 ◊
9.39
(0.87)
27"
(686)
50 1/8"
(1273)
16.94
(1.57)
30 7/16"
(773)
22.11
(2.05)
244FX4946
16.66
(1.55)
20.99
(1.95)
244GW5050 ◊
10.52
(0.98)
27"
(686)
56 1/8"
(1425)
19.08
(1.77)
24 7/16"
(620)
24.59
(2.28)
244FX4950
18.76
(1.74)
23.35
(2.17)
244GW6030 ◊
7.36
(0.68)
33"
(838)
32 1/8"
(816)
12.98
(1.21)
48 7/16"
(1230)
17.63
(1.64)
244FX5030
10.96
(1.02)
14.67
(1.36)
244GW6036 ◊
8.73
(0.81)
33"
(838)
38 1/8"
(968)
15.62
(1.45)
42 7/16"
(1078)
20.61
(1.92)
244FX5040
15.42
(1.43)
19.63
(1.82)
244GW6040 ◊
10.11
(0.94)
33"
(838)
44 1/8"
(1121)
18.26
(1.70)
36 7/16"
(925)
23.59
(2.19)
244FX5046
17.65
(1.64)
22.11
(2.05)
244GW6046 ◊
11.48
(1.07)
33"
(838)
50 1/8"
(1273)
20.90
(1.94)
30 7/16"
(773)
26.56
(2.47)
244FX5050
19.88
(1.85)
24.59
(2.28)
244GW6050 ◊
12.86
(1.20)
33"
(838)
56 1/8"
(1425)
23.54
(2.19)
24 7/16"
(620)
29.54
(2.74)
244FX5630
12.19
(1.13)
16.15
(1.50)
244FX5640
17.15
(1.59)
21.61
(2.01)
244FX5646
19.63
(1.82)
24.34
(2.26)
244FX5650
22.11
(2.05)
27.06
(2.51)
244FX6030
13.42
(1.25)
17.63
(1.64)
244FX6040
18.88
(1.75)
23.59
(2.19)
244FX6046
21.61
(2.01)
26.56
(2.47)
244FX6050
24.34
(2.26)
29.54
(2.75)
• "Top of Subfloor to Top of Inside Sill Stop" is calculated based upon a structural header height of 6'-10 1/2" (2096). • Dimensions in parentheses are in millimeters or square meters. ◊ Meet or exceed clear opening area of 5.7 sq. ft. or 0.53 m2, clear opening width of 20" (508) and clear opening height of 24" (610).
• Dimensions in parentheses are in square meters.
Gliding Window Details
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
4 1 ⁄ 2" (114)
(6)
Unit Dimension Width
1 ⁄ 4"
(6)
Minimum Rough Opening Width Unit Dimension Width Minimum Rough Opening Width Horizontal Section
1 ⁄ 4"
(6)
Clear Opening Height
(6)
Jamb
Head Drywall Return
Head 1 13 ⁄ 16" Drywall Return
1 13 ⁄ 16"
200 Series Gliding Windows
1 ⁄ 4"
1 ⁄ 4"
2 3 ⁄ 4" (70)
1 5 ⁄ 16" (33)
Minimum Rough Opening Height Clear Opening Height Unit Dimension Height
1 5 ⁄ 16" (33)
2 3 ⁄ 16" (56)
Jamb
Unit Dimension Height
2 3 ⁄ 4" (70)
4 1 ⁄ 2" (114) 2 3 ⁄ 4" (70)
4 1 ⁄ 2" (114)
1 5 ⁄ 16" (33)
Jamb
Drywall Return
2 3 ⁄ 16" (56)
Minimum Rough Opening Height
Drywall Return
Jamb
2 3 ⁄ 4" 1 5 ⁄ 16" (70) (33) 4 1 ⁄ 2" (114)
Sill Vertical Section Sill
• Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
231
GLIDING WINDOWS Picture Window Details
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
4 1 ⁄ 2" (114)
4 1 ⁄ 2" (114)
4 1 ⁄ 2" (114)
Head 1 7 ⁄ 8" (47) 1 1 ⁄ 16" (27)
1 5 ⁄ 16" (33)
Jamb
Unobstr. 3" (76) Glass Unit Dimension Width
3" (76)
1 ⁄4"
(6)
Minimum Rough Opening Width
(81) (33)
Jamb 1 ⁄4"
3" Unobstructed 3" Glass (76) (76)
(47)
(33)
4 1 ⁄ 2" (114) 3 "1 ⁄ 16" 1 5 ⁄ 16 (33)(78)
Drywall Return
1 1 ⁄ 16" (27) 1 7 ⁄ 8"
3 3 ⁄ 161" 5 ⁄ 16"
Unit Dimension Height
1 7 ⁄ 8" (47)
1 5 ⁄ 16"
3" Unobstructed 3" Glass (76) (76) Minimum Rough Opening Height
1 1 ⁄ 16" (27)
Unit Dimension Height
1 7 ⁄ 16" (37) Drywall Return
(78)
Minimum Rough Opening Height
3 1 ⁄ 16"
Head
1 7 ⁄ 16" (37) Drywall Return
11 ⁄ 16" (17) 3 ⁄ 8" (10)
1 1 ⁄ 16" (27)
1 7 ⁄ 8" (47)
1 7 ⁄ 8" (47)
Extension Jamb Head 1 7 ⁄ 8"
(47)
3 ⁄ 8" (10) 11 ⁄ 16" (17)
1 7 ⁄ 8" (47) 1 1 ⁄ 16" (27)
Sill Horizontal Section
Sill Vertical Section
Separate Rough Openings Detail To meet structural requirements or to achieve a wider joined appearance, windows may be installed into separate rough openings having
Jamb
Jamb
Andersen® Filler and Vinyl Trim Vertical Support by Others
vertical support (by others) in combination with Andersen® exterior filler and exterior vinyl trim. Unit Dim. 2" (51) Unit Dim. Horizontal Section Gliding and Gliding
• Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. • Dimensions in parentheses are in millimeters.
232
1 7 ⁄ 8" (47
4 1 ⁄ 2" (114) 1 5 ⁄ 16" (33)
Jamb 1 ⁄4"
(6)
(6)
Sill
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
1 1 ⁄ 16" (27)
Unobstr. Glass Unit Dimension W
3" (76)
Minimum Rough Open
NARROLINE GLIDING PATIO DOORS ®
CUSTOM SIZING in 1⁄8" (3) increments
SECTION REFERENCE Table of Sizes ............................. 236 Specifications ............................ 237 Custom Sized Doors ................... 237 Grille Patterns ............................ 238 Door Details ........................238-239 Combination Designs ................. 255 Performance Data ...................... 269 Warranty .............................290-291 Dimensions in parentheses are in millimeters.
200 Series® Narroline Gliding Patio Doors
Joining Details............................ 239
NARROLINE GLIDING PATIO DOORS ®
C
FEATURES
Glass G Panels are silicone bed glazed and
Frame A The sill (one- and two-panel configurations) has an anodized aluminum track with a stainless steel cap that resists stain, rust and denting.* On four-panel doors, sills have an attractive, water-repellent baked-on finish in a neutral gray color. A thermal barrier reduces conductive heat loss and limits condensation on the inside. The exterior portion of the sill is also anodized aluminum.
H Choose Low-E tempered, Low-E HeatLock™ tempered, Low-E SmartSun™ tempered, Low-E SmartSun™ HeatLock™ tempered or dual-pane tempered glass.
G D
Additional glass options are available. Contact your Andersen supplier. F
E
A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite.
B All basic exterior frame members are covered with a rigid vinyl that maintains an attractive appearance while minimizing maintenance.
C Wood frame members are treated
A
Dual ball-bearing rollers on door panels provide smooth gliding operation with self-contained leveling adjusters.
Factory-assembled doors are available (two-panel doors) and arrive at the jobsite ready to install. Unassembled doors are also available and require jobsite assembly.
Flexible Seal
D A flexible vinyl weatherstrip on the head and side jambs provides a positive seal between the frame and panels.
protected by a low-maintenance urethane base finish in White, Canvas, Sandtone, Terratone, Dark Bronze or Black color.
F Laminated veneer lumber panels provide excellent structural stability and energy efficiency.
The unique Andersen® reachout locking system pulls the door panel snugly into the jamb for weathertightness and enhanced security.
EXTERIOR
with a water-repellent preservative for longlasting* protection and performance. Interior frame trim pieces are unfinished pine.
Panel E The exterior of the wood door panel is
Reachout Locking Hardware
finished with an interior wood stop.
B
H
Locking System
White
Canvas
Dark Bronze
Black
INTERIOR
Sandtone
Terratone
Unfinished Pine
Naturally occurring variations in grain, color and texture of wood make each door one-of-a-kind.
A full-length combination weatherstrip/ interlock system provides a flexible seal at the meeting stile.
Sill For one- and two-panel doors, sills can be ordered with an attractive water-repellent baked-on finish in a neutral gray color.
Panel interior surfaces are unfinished pine, ready for natural stain or paint finish.
HARDWARE FINISHES
Antique Brass
Black
Bright Brass
Gold Dust
Oil Rubbed Polished Bronze Chrome
Brushed Chrome
Distressed Distressed Bronze Nickel
Satin Nickel
Stone
White
Distressed bronze and oil rubbed bronze are "living" finishes that will change with time and use.
GLIDING PATIO DOOR HARDWARE OPTIONS Bold name denotes finish shown. **
YUMA®
ENCINO ®
ANVERS ®
NEWBURY ®
COVINGTON ™
WHITMORE ®
ALBANY
TRIBECA®
Distressed Bronze Distressed Nickel
Distressed Bronze Distressed Nickel
Bright Brass Oil Rubbed Bronze Satin Nickel
Antique Brass Bright Brass Brushed Chrome Oil Rubbed Bronze Polished Chrome Satin Nickel
Antique Brass Bright Brass Oil Rubbed Bronze
Antique Brass Bright Brass Oil Rubbed Bronze Satin Nickel
Black Gold Dust Stone White
Stone White
* Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 200 Series Limited Warranty. ** Hardware sold separately. Dimensions in parentheses are in millimeters.
Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
234
Tribeca and Albany hardware are zinc diecast with powder-coated durable finish. Other hardware is solid forged brass. Mix-and-match interior and exterior style and finish options are available. Bright brass and satin nickel finishes feature a 10-year limited warranty.
ACCESSORIES Sold Separately Frame
Sill Support
Extension Jambs Standard jamb depth is 4 9/16" (116). Pine, oak or maple veneer or prefinished White interior extension jambs are available in 1⁄16" (1.5) increments between 4 9⁄16" (114) and 7 1⁄8" (181). Threshold
Insect Screens
Grilles
All insect screens have a long-lasting* fiberglass screen mesh with a charcoal finish and are color matched to the exterior of the door unless otherwise specified.
Grilles are available in a variety of configurations and widths. For patio door grille patterns see page 238.
Gliding Insect Screen
Stationary units can also be selected for use as sidelights. See size table on page 236 for size options.
An aluminum sill support is designed to lock into a channel under the sill and tie back into the wall. This will offer support to the outermost sill section when needed. Available in neutral gray finish.
Exterior Trim This product is available with Andersen® Exterior Trim. See pages 215-220 for details.
Hardware An oak or maple threshold is available for finishing the interior of the sill.
Exterior Keyed Lock
Ramped Sill Insert
Ramped sills provide smooth transition from interior to exterior and can be used with a retractable insect screen, but not a gliding insect screen. Shown here with an Andersen® Frenchwood® patio door. (Specifier must check with local and federal officials to determine if product meets accessibility codes.)
A six-pin key cylinder lock is available in styles and finishes that coordinate with hardware. This lock allows the gliding door to be locked and unlocked from the exterior.
Patented square corner joint construction adds considerable strength to the frame members. The insect screen is available for both two-panel doors and four-panel doors. Gliding insect screens have Delrin® injection-molded bottom rollers with selfcontained leveling adjusters, providing smooth operation. Interior and exterior pulls and latch are provided. Retractable Insect Screen
Auxiliary Foot Lock
Provides an extra measure of security when the door is in a locked position. Lock can be set so the door is fully closed or partially open to provide a secure venting position. Available in all hardware finishes.
Sidelights
CAUTION: • Painting and staining may cause damage to rigid vinyl. • 200 Series doors in Terratone color may be painted any color lighter than Terratone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Terratone any color darker than Terratone. • Do not paint 200 Series doors with White, Canvas, Sandtone, Dark Bronze or Black exterior colors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
The retractable insect screen is installed on the exterior of the door and opens side-to-side across the width of the opening. When the insect screen is not in use, it neatly retracts into a small canister mounted on the exterior of the door. The retractable insect screen canister is available for two-panel patio doors in White, Canvas, Sandtone, Terratone, Dark Bronze and Black colors. Please note, retractable insect screen track reduces clear opening height by 1" (25).
For more information about combination designs, product performance, installation accessories and warranty see pages 255-291 or visit
NOTE: Andersen® patio doors are not intended for use as entrance doors.
andersenwindows.com
"Delrin" is a registered trademark of E.I. du Pont de Nemours and Company.
*Visit andersenwindows.com/warranty or contact your Andersen supplier for details on the 200 Series Limited Warranty. Dimensions in parentheses are in millimeters.
235
200 Series® Narroline Gliding Patio Doors
For more information about glass and grilles see pages 10-11.
NARROLINE GLIDING PATIO DOORS ®
For all four-panel gliding
86 11 ⁄16" (2202)
8'-0" (2438)
7'-11 1 ⁄ 2" (2426)
73 1 ⁄ 2" (1867)
6'-11" (2108)
6'-10 3 ⁄ 8" (2092)
70 5 ⁄ 8" (1794)
6'-8" (2032)
6'-7 1 ⁄ 2" (2019)
Unobstructed Glass
Minimum Rough Opening
Door Dimension
Three Patio Door Heights
patio doors add 1/4" (6) to the "Minimum Rough Opening" height dimension.
NLGD x x 68
NLGD x x 611
NLGD x x 80
Table of Narroline® Gliding Patio Door Sizes Scale 1 ⁄ 8" = 1'-0" (1:96) Door Dimension
2'-8" (813)
4'-11 1 ⁄4" (1505)
4'-11 1 ⁄4" (1505)
9'-9" (2972)
Minimum Rough Opening
2'-8 3 ⁄4" (832)
5'-0" (1524)
5'-0" (1524)
9'-9 3 ⁄4" (2991)
Unobstructed Glass
24 1 ⁄ 2" (622)
24 1 ⁄ 2" (622)
24 1 ⁄ 2" (622)
24 1 ⁄ 2" (622)
(single panel only)
Custom-size doors are available in 1 ⁄ 8" (3) increments. See page 237 for custom sizes
3 heights
and specifications. NLGD2968S NLGD29611S NLGD2980S
NLGD5068L NLGD50611L NLGD5080L
NLGD5068R NLGD50611R NLGD5080R
NLGD10068-4* NLGD100611-4* NLGD10080-4*
Viewed from the exterior. Arrow indicates direction of panel operation. Stationary (S)
Door Dimension
3'-2" (965)
5'-11 1 ⁄4" (1810)
5'-11 1 ⁄4" (1810)
11'-9" (3581)
Minimum Rough Opening
3'-2 3 ⁄4" (984)
6'-0" (1829)
6'-0" (1829)
11'-9 3 ⁄4" (3600)
Unobstructed Glass
30 1 ⁄ 2" (775)
30 1 ⁄ 2" (775)
30 1 ⁄ 2" (775)
30 1 ⁄ 2" (775)
NLGD6068L NLGD60611L NLGD6080L
NLGD6068R NLGD60611R NLGD6080R
(single panel only)
doors can be used as an individual unit or as a sidelight. Grille patterns shown on page 238.
3 heights
NLGD3368S NLGD33611S NLGD3380S
NLGD12068-4* NLGD120611-4* NLGD12080-4*
Door Dimension
4'-2" (1270)
7'-11 1 ⁄4" (2419)
7'-11 1 ⁄4" (2419)
15'-9" (4801)
Minimum Rough Opening
4'-2 3 ⁄4" (1289)
8'-0" (2438)
8'-0" (2438)
15'-9 3 ⁄4" (4820)
Unobstructed Glass
42 1 ⁄ 2" (1080)
42 1 ⁄ 2" (1080)
42 1 ⁄ 2" (1080)
42 1 ⁄ 2" (1080)
(single panel only)
3 heights
NLGD4368S NLGD43611S NLGD4380S
NLGD8068L NLGD80611L NLGD8080L
NLGD8068R NLGD80611R NLGD8080R
NLGD16068-4* NLGD160611-4* NLGD16080-4*
• "Window Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. *Add 1/4" (6) to the "Minimum Rough Opening" height dimension for four-panel doors.
236
Order Designation Description Viewed from the exterior.
6068 L
NLGD Narroline® Gliding Patio Door
Left Gliding Door Rough Opening
6068 R
NLGD Narroline® Gliding Patio Door
NLGD Narroline® Gliding Patio Door
Right Gliding Door Rough Opening
12068– 4 Four-Panel Door Rough Opening
CUSTOM WIDTHS
CUSTOM WIDTHS
CUSTOM WIDTHS
Clear Opening
CUSTOM HEIGHTS
Minimum R.O.
Two-Panel
Single-Panel & Two-Panel
Unobstr. Glass
= width + 3/4" (19) Height = height + 1/2" (13)
= (width ÷ 2) - 7.5" (191) Height = height - 4.125" (105)
Width
Four-Panel
Four-Panel
= (width ÷ 2) - 13.75" (349) Height = height - 4.125" (105)
Width
Width
Single-Panel Width
= width − 9.5" (241) height − 8.859" (225)
Height =
Two-Panel
= width + 3/4" (19) Height = height + 3/4" (19)
Width
CUSTOM HEIGHTS
109" to 189" (2769) (4801)
78" to 95 1 ⁄ 2" (1981) (2426)
55 1 ⁄4" to 95 1 ⁄4" (1403) (2419)
78" to 95 1 ⁄ 2" (1981) (2426)
30" to 50" (762) (1270)
CUSTOM HEIGHTS
78" to 95 1 ⁄ 2" (1981) (2426)
Custom Sizes and Specification Formulas
Width
= width − 10.25" (260) height − 8.859" (225)
Height =
Four-Panel
= width − 19.0" (483) Height = height − 8.859" (225) Width
Available in 1 ⁄ 8" (3) increments between minimum and maximum widths and heights shown. Some restrictions apply. Measurement guide can be found at
• Dimensions in parentheses are in millimeters. • Clear Opening formulas provide dimensions for determining area available for egress. Vent opening, or area available for passage of air, is equal to clear opening. Minimum R.O. (minimum rough opening) formulas provide minimum rough opening width and height dimensions. Unobstr. Glass (unobstructed glass) formulas provide dimensions for determining area available for passage of light.
Clear Opening in Full Open Position Door Number
Clear Opening Area Sq. Ft./(m2)
NLGD5068
11.58
(1.08)
22 1/8"
NLGD6068
14.72
(1.37)
28 1/8"
NLGD8068
21.00
(1.95)
40 1/8"
NLGD10068
23.42
(2.18)
44 3/4"
NLGD12068
29.70
(2.76)
NLGD16068
42.27
NLGD50611
Width Inches/(mm) (562)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Area Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
Stationary Narroline® Gliding Patio Door Area Specifications Door Number
Glass Area Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
75 3/8"
(1915)
24.03
(2.23)
11.58
(1.08)
32.71
(3.04)
(714)
75 3/8"
(1915)
29.92
(2.78)
14.72
(1.37)
39.34
(3.66)
NLGD2968
12.02
(1.12)
17.67
(1.64)
(1020)
75 3/8"
(1915)
41.69
(3.87)
21.00
(1.95)
52.59
(4.89)
NLGD3368
14.96
(1.39)
20.98
(1.95)
(1137)
75 3/8"
(1915)
48.08
(4.47)
23.42
(2.18)
64.59
(6.00)
NLGD4368
20.84
(1.94)
27.60
(2.56)
56 3/4"
(1441)
75 3/8"
(1915)
59.84
(5.56)
29.71
(2.76)
77.84
(7.23)
NLGD29611
12.51
(1.16)
18.31
(1.70)
(3.93)
80 3/4"
(2051)
75 3/8"
(1915)
83.36
(7.74)
42.27
(3.93)
104.34
(9.69)
NLGD33611
15.57
(1.45)
21.74
(2.02)
12.04
(1.12)
22 1/8"
(562)
78 3/16"
(1986)
25.01
(2.32)
12.04
(1.12)
33.89
(3.15)
NLGD43611
21.69
(2.02)
28.60
(2.66)
NLGD60611
15.31
(1.42)
28 1/8"
(714)
78 3/16"
(1986)
31.14
(2.89)
15.31
(1.42)
40.76
(3.79)
NLGD2980
14.74
(1.37)
21.22
(1.97)
NLGD80611
21.84
(2.03)
40 1/8"
(1020)
78 3/16"
(1986)
43.39
(4.03)
21.84
(2.03)
54.49
(5.06)
NLGD3380
18.35
(1.71)
25.20
(2.34)
NLGD100611
24.30
(2.26)
44 3/4"
(1137)
78 3/16"
(1986)
50.04
(4.65)
24.30
(2.26)
66.93
(6.22)
NLGD4380
25.57
(2.34)
33.16
(3.08)
NLGD120611
30.81
(2.86)
56 3/4"
(1441)
78 3/16"
(1986)
62.28
(5.79)
30.81
(2.86)
80.66
(7.49)
NLGD160611
43.85
(4.07)
80 3/4"
(2051)
78 3/16"
(1986)
86.76
(8.06)
43.84
(4.07)
108.12
(10.04)
NLGD5080
14.04
(1.30)
22 1/8"
(562)
91 3/8"
(2321)
29.48
(2.74)
14.04
(1.30)
39.29
(3.65)
NLGD6080
17.85
(1.66)
28 1/8"
(714)
91 3/8"
(2321)
36.70
(3.41)
17.85
(1.66)
47.25
(4.39)
NLGD8080
25.46
(2.37)
40 1/8"
(1020)
91 3/8"
(2321)
51.14
(4.75)
25.46
(2.37)
63.17
(5.87)
NLGD10080
28.40
(2.64)
44 3/4"
(1137)
91 3/8"
(2321)
58.96
(5.48)
28.40
(2.64)
77.59
(7.21)
NLGD12080
36.01
(3.35)
56 3/4"
(1441)
91 3/8"
(2321)
73.40
(6.82)
36.01
(3.35)
93.51
(8.69)
NLGD16080
51.24
(4.76)
80 3/4"
(2051)
91 3/8"
(2321)
102.28
(9.50)
51.24
(4.76)
125.34
(11.65)
• Dimensions in parentheses are in square meters.
• Dimensions in parentheses are in millimeters or square meters.
237
200 Series® Narroline Gliding Patio Doors
Two-Panel & Four-Panel Narroline® Gliding Patio Door Opening and Area Specifications
andersenwindows.com/measure.
NARROLINE GLIDING PATIO DOORS ®
Grille Patterns Prairie A
Colonial
Modified Colonial
Modified Colonial SCR (Simulated Check Rail)
Tall Fractional
Tall Fractional SCR (Simulated Check Rail)
Short Fractional
Number of lights and overall
Short Fractional SCR (Simulated Check Rail)
pattern varies with panel size. Patterns are not available
Narroline® Gliding Patio Doors
in all configurations. For more information on divided light see page 11 or visit andersenwindows.com/grilles.
Narroline® Gliding Patio Door Details Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
CL
Jamb Jamb
3 3 ⁄ 4" (95)
2 1 ⁄ 16" (52) 3 ⁄ 8"
Jamb
3 3 ⁄ 4" (95) Unit Dimension Width
(10)
3 ⁄ 8"
(10)
Head
Andersen® 2 5 ⁄ 8" ⁄ 16" 3 9Oak or Maple (90) Threshold (67) 4 11 ⁄ 16" (119) ⁄ 16" 2 1Stiles Dim. to C. L. of Mtg. Dim. to Center Line of Meeting Stiles (52) Andersen Unit Dimension Width Sill Support Minimum Rough Opening Width Sill
Auxiliary Foot Lock
6 1 ⁄ 16" (154)
Unit Dimension Width
Unit Dimension Width ⁄ 8" (10) mum Rough Opening Width 3
Jamb
Jamb
3 9 ⁄ 16" (90) 3 ⁄ 8" (10)
⁄ 8" Minimum Rough Opening Width (10) 3
1 5 ⁄ 16" (33)
3 13 ⁄ 16" (97) Unit Dimension Height
Astragal
2 5 ⁄ 8" 3 1 ⁄ 2" 3 9 ⁄ 16" Right Hand (67) (89) 1 5 ⁄ 16"(90) Jamb Meeting Stile (33) Dim. to C. L. of Mtg. Stiles Dim. to Center Line of Meeting Stiles
Stationary Panel
4 9 ⁄ 16" (116) Jamb Depth
4 9 ⁄ 16" (116) Jamb Depth
Jamb
Jamb
Jamb
3 ⁄ 8" (10)
3 ⁄ 8"
3 3 ⁄4 (95)
(10)
M
Stationary Panel CL
CL
1 5 ⁄ 16" (33)
Vertical Section Stationary
Minimum Rough Opening Height
Active Panel Active Panel Clear Opg. Width Stationary Panel
4 9 ⁄ 16" (116) Jamb Depth
(103)
Horizontal Section Stationary
l
1 3 ⁄ 4" (44)
3 1 ⁄ 2" (89)
3 ⁄ 8" (10)
Minimum Rough Opening Width
1" (25)
4 1 ⁄ 16"
3 ⁄ 8"
(10)
Active Panel CL
Left Hand 4 11 ⁄ 16" (119) Meeting Stile 3" (76)
Horizontal Section Two-Panel
Sta
1 3CL⁄ 4" (44)
Head
Andersen Sill Support
Active Panel
Clear Opening Height
Andersen® Oak r Maple Threshold
Stationary Panel
1 3 ⁄ 4" (44) Unit Dimension Height
1 3 ⁄ 4" (44)
Minimum Rough Opening Height
1" (25)
Active Panel Clear Opg. Width
Sill
Right Hand Meeting Stile
Astragal 1651⁄ 16 ⁄ 16""(33) 3 ⁄ 4" (19) (154)
Unit Dimension Width Andersen® Oak Minimum Rough Opening Width or Maple Threshold
Vertical Section
Head
lear Opening Height
nit Dimension Height
238
um Rough Opening Height
• 4 9/16" (116) jamb depth measurement is from backside of installation flange. 1 3 ⁄ 4" (44) • Light-colored areas are parts included ⁄ 16" door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. 3 13with • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. (97) • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
Gliding insect screen cannot be used with ramped sill.
8
5 ⁄ 16"
1
(8) 7⁄
(52) 3 ⁄ 8"
Andersen Sill Support
Unit Dimension Width
(10)
3 ⁄ 8"
(10)
Minimum Rough Opening Width Sill
Stationary Panel
CL
Active Panel
Active Panel Head CL
4 11 ⁄ 16" (119)
3 9 ⁄ 16" (90)
Stationary Panel
4 9 ⁄ 16" (116) Jamb Depth 1 5 ⁄ 16" (33) 3 ⁄ 4" (19)
Left Hand Andersen Meeting StileSill Support
Jamb
Clear Opening Height
Auxiliary Foot Lock
1 3 ⁄ 4" (44)
3 13 ⁄ 16" (97) Unit Dimension Height
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Minimum Rough Opening Height
Narroline® Gliding Patio Door Details
Right Hand Andersen® Oak orMeeting Maple Threshold Stile
Astragal Sill 6 1 ⁄ 16" (154)
3" (76)
Unit Dimension Width
3 ⁄ 8" (10)
1 5 ⁄ 16" (33)
Jamb
3 ⁄ 8" (10)
Minimum Rough Opening Width
Horizontal Section Four-Panel
Ramped Sill ⁄ 4" (44) 1 3 Detail
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 Gliding insect screen cannot be used with ramped sill.
5 ⁄ 16"
8
(8)
1
1 7 ⁄ 16" (37) 3 3 ⁄ 4" (95)
t Dimension Width
Jamb
1 ⁄ 4"
(6) 3 ⁄ 8"
Vertical Section
(10)
m Rough Opening Width
Separate Rough Openings Detail
Vertical Joining Detail
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 1 ⁄ 16"
3 ⁄ 4" (44) Sum of individual 1door widths
y Panel
(1.5)
1 3 ⁄ 4" (44)
(1.5)
1 3 ⁄ 8" (35)
1 3 ⁄ 8" (35) 1 3 ⁄ 8" (35)
3 ⁄ 4"
(19)
To structural 1 3 ⁄ 8requirements " (35) 3 ⁄ 4meet " (19) appearance, doors may be
Overall Rough Opening Width
installed into separate rough
Overall door width plus 3 ⁄ 4" (19).
openings having vertical support
4 9 ⁄ 16"
(by others) in combination with
1 ⁄ 16"
(1.5)
1 5 ⁄ 16" (33)
(1.5)
exterior vinyl trim.
Horizontal Section Narroline® Gliding to Narroline Gliding
3 ⁄ 4"
3 ⁄ 4"
(19)
(44)
(1.5)
Overall3 ⁄ 8Door Width "1 3 ⁄ 8Dimension " (35) (10)
1 3 ⁄ 8" (35)
3 ⁄ 4"
(19)
2" (51)
2" (51)
1 3 ⁄ 8" (35)
1 3 ⁄ 8" (35)
Andersen does not recommend joining of receiver jamb to receiver jamb. For more joining information see the combination designs section starting on page 255.
plus 3 ⁄ 4" (19) for each join.
Andersen® Filler and Vinyl Trim
Overall Rough Opening Width Overall door width plus 3 ⁄ 4" (19).
(1.5)
Vertical Support by Others
Horizontal Section Narroline® Gliding and Narroline Gliding 1 3 ⁄ 4" (44)
Sum of individual door widths
1 ⁄ 16"
2" (51)
(19)
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 3 ⁄ 4"
Andersen® Filler and Vinyl Trim
Andersen® Filler and Vinyl Trim
Vertical Joining Detail – LVL 1 ⁄ 16"
3 ⁄ 4"
(19)
Horizontal Section Narroline® Gliding to Narroline Gliding
1
1 3 ⁄ 8" (35)
Andersen® exterior filler and 1 ⁄ 16"
Jamb
2" (51)
1 3 ⁄ 4" (44)
1 3 ⁄a8"wider (35) joined or to achieve
plus 1 ⁄ 16" (1.5) for each join.
(116) Jamb Depth
1 3 ⁄ 8" (35) 1 3 ⁄ 4" (44)
2" (51)
• 4 9/16" (116) jamb depth measurement is from backside of installation flange. • Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. Vertical Support • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to 2" (51) by Others product installation guides at andersenwindows.com. • Andersen recommends installation of doors into separate rough openings. Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. • Dimensions in parentheses are in millimeters.
239
200 Series® Narroline Gliding Patio Doors
Overall Door Dimension Width
1 ⁄ 16"
V b
NOTES PAGE
240
200 Series ® Perma-Shield Gliding Patio Doors
PERMA-SHIELD GLIDING PATIO DOORS
®
CUSTOM SIZING in 1⁄8" (3) increments
SECTION REFERENCE Table of Sizes ............................. 244 Specifications ........................... 245 Custom Sized Doors .................. 244 Grille Patterns ............................ 245 Door Details ........................245-246 Joining Details............................ 246 Combination Designs ................. 255 Performance Data ...................... 269 Warranty .............................290-291 Dimensions in parentheses are in millimeters.
PERMA-SHIELD GLIDING PATIO DOORS ®
C
FEATURES Frame A The sill has an anodized aluminum
Blinds Between the Glass are now available for select gliding patio door sizes when ordered with Low-E tempered glass. White 1⁄2" (13) aluminum slat blinds come mounted between two panes of insulated glass in a dust-free environment. Blinds are magnetically controlled and can be tilted or raised and lowered using low profile controls. Smooth, simple operation allows for customized light and privacy control. Available in 51168, 61611 and 33611 door sizes. For more information contact your Andersen supplier.**
B
track with a stainless steel cap that resists stain, rust and denting.* A thermal barrier reduces conductive heat loss and limits condensation on the inside.
D G
B All basic exterior frame members are covered with a rigid vinyl which maintains an attractive appearance while minimizing maintenance.
Blinds Between the Glass
H
E F
A
C Wood frame members are treated with a water-repellent preservative for long-lasting* protection and performance. Factory-assembled doors are available (two-panel doors) and arrive at the jobsite ready to install. Unassembled doors are also available and require jobsite assembly.
D A flexible vinyl weatherstrip on the head and side jambs provides a positive seal between the frame and panels.
Panel E All panel surfaces are covered with a rigid vinyl which maintains an attractive appearance while minimizing maintenance.
F Laminated veneer lumber panels provide excellent structural stability and energy efficiency. Dual-rollers on door panels provide smooth gliding operation with self-contained leveling adjusters. Flexible Seal A full-length combination weatherstrip/ interlock system provides a flexible seal at the meeting stile.
Glass G A high-performing thermoplastic glazing bead features a flexible lip which provides superior weathertightness and long-term durability.
H Glass options include: • Low-E tempered glass • Low-E HeatLock™ tempered glass • Low-E Sun tempered glass • Low-E SmartSun™ tempered glass • Low-E SmartSun™ HeatLock™ tempered glass • Dual-pane tempered glass Additional glass options are available. Contact your Andersen supplier. A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite.
EXTERIOR & INTERIOR
White
Canvas
Sandtone
Terratone
Dark Bronze
Black
HARDWARE FINISHES
Antique Brass
Black
Bright Brass
Gold Dust
Oil Rubbed Polished Bronze Chrome
Brushed Chrome
Distressed Distressed Bronze Nickel
Satin Nickel
Stone
White
Distressed bronze and oil rubbed bronze are "living" finishes that will change with time and use.
GLIDING PATIO DOOR HARDWARE OPTIONS Bold name denotes finish shown. †
YUMA®
ENCINO ®
ANVERS ®
NEWBURY ®
COVINGTON ™
WHITMORE ®
ALBANY
TRIBECA®
Distressed Bronze Distressed Nickel
Distressed Bronze Distressed Nickel
Bright Brass Oil Rubbed Bronze Satin Nickel
Antique Brass Bright Brass Brushed Chrome Oil Rubbed Bronze Polished Chrome Satin Nickel
Antique Brass Bright Brass Oil Rubbed Bronze
Antique Brass Bright Brass Oil Rubbed Bronze Satin Nickel
Black Gold Dust Stone White
Stone White
* Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 200 Series Limited Warranty. ** See your Andersen supplier for details on the 200 Series Limited Warranty (after October 2015). † Hardware sold separately. Dimensions in parentheses are in millimeters. Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
242
Tribeca and Albany hardware are zinc diecast with powder-coated durable finish. Other hardware is solid forged brass. Mix-and-match interior and exterior style and finish options are available. Bright brass and satin nickel finishes feature a 10-year limited warranty.
200 Series ® Perma-Shield Gliding Patio Doors
ACCESSORIES Sold Separately Locking System
Frame
Hardware
Reachout Locking Hardware
Extension Jambs
Exterior Keyed Lock
Retractable Insect Screen
Standard jamb depth is 4 9/16" (116). Pine, oak or maple veneer or prefinished White interior extension jambs are available in 1⁄16" (1.5) increments between 4 9⁄16" (114) and 7 1⁄8" (181). Threshold A six-pin key cylinder lock is available in styles and finishes that coordinate with hardware. This lock allows the gliding door to be locked and unlocked from the exterior.
The unique Andersen® reachout locking system pulls the door panel snugly into the jamb for weathertightness and enhanced security.
Auxiliary Foot Lock
Select Perma-Shield® gliding patio door sizes are available with Stormwatch® protection. For more information contact your Andersen supplier.
An oak or maple threshold is available for finishing the interior of the sill. Ramped Sill Insert
Performance Grade (PG) Upgrade Heavy-duty rollers and reinforced frame and panel components allow standard glass units to achieve higher performance ratings. Performance Grade (PG) Ratings replace Design Pressure (DP) Ratings for measuring product performance. For up-to-date performance information of individual products please visit andersenwindows.com.
The retractable insect screen is installed on the exterior of the door and opens side-to-side across the width of the opening. When the insect screen is not in use, it neatly retracts into a small canister mounted on the exterior of the door. The retractable insect screen canister is available for two-panel patio doors in White, Canvas, Sandtone, Terratone, Dark Bronze and Black colors. Please note, retractable insect screen track reduces clear opening height by 1" (25).
Grilles
Ramped sills provide smooth transition from interior to exterior and can be used with a retractable insect screen, but not a gliding insect screen. Shown here with an Andersen® Frenchwood® patio door. (Specifier must check with local and federal officials to determine if product meets accessibility codes.) Sill Support
An aluminum sill support is designed to lock into a channel under the sill and tie back into the wall. This will offer support to the outermost sill section when needed. Available in neutral gray finish.
Provides an extra measure of security when the door is in a locked position. Lock can be set so the door is fully closed or partially open to provide a secure venting position. Available in all hardware finishes.
Insect Screens All insect screens have a long-lasting* fiberglass screen mesh with a charcoal finish and are color matched to the exterior of the door unless otherwise specified. Gliding Insect Screen
Patented square corner joint construction adds considerable strength to the frame members. The insect screen is available for both two-panel doors and four-panel doors. Gliding insect screens have Delrin® injection-molded bottom rollers with selfcontained leveling adjusters, providing smooth operation. Interior and exterior pulls and latch are provided.
Grilles are available in a variety of configurations and widths. For patio door grille patterns see page 245.
Sidelights Stationary units can also be selected for use as sidelights. See size table on page 244 for size options.
Exterior Trim This product is available with Andersen® Exterior Trim. See pages 215-220 for details. CAUTION: • Painting and staining may cause damage to rigid vinyl. • 200 Series doors in Terratone color may be painted any color lighter than Terratone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Terratone any color darker than Terratone. • Do not paint 200 Series doors with White, Canvas, Sandtone, Dark Bronze or Black exterior colors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
For more information about glass and grilles see pages 10-11. For more information about combination designs, product performance, installation accessories and warranty see pages 255-291 or visit
NOTE: Andersen® patio doors are not intended for use as entrance doors.
andersenwindows.com
"Delrin" is a registered trademark of E.I. du Pont de Nemours and Company.
*Visit andersenwindows.com/warranty or contact your Andersen supplier for details on the 200 Series Limited Warranty. Dimensions in parentheses are in millimeters.
243
PERMA-SHIELD GLIDING PATIO DOORS ®
Table of Perma-Shield® Gliding Patio Door Sizes Scale 1 ⁄ 8" = 1'-0" (1:96) Door Dimension
4'-11 1 ⁄4" (1505)
4'-11 1 ⁄4" (1505)
5'-10 1 ⁄ 2" (1791)
5'-10 1 ⁄ 2" (1791)
Minimum Rough Opening
5'-0" (1524)
5'-0" (1524)
5'-11 1 ⁄4" (1810)
5'-11 1 ⁄4" (1810)
Unobstructed Glass
24 3 ⁄4" (629)
24 3 ⁄4" (629)
30 3 ⁄ 8" (772)
30 3 ⁄ 8" (772)
(single panel only)
71" (1803)
6'-8" (2032)
6'-7 1 ⁄ 2" (2019)
Custom-size doors are available in 1 ⁄ 8" (3) increments. See below for PS5068L
PS5068R
custom sizes and
PS51168R
PS51168L
specifications.
Door Dimension
3'-2 3 ⁄ 8" (975)
6'-0" (1829)
6'-0" (1829)
4'-2 3 ⁄ 8" (1280)
8'-0" (2438)
8'-0" (2438)
Minimum Rough Opening
3'-3 1 ⁄ 8" (994)
6'-0 3 ⁄4" (1848)
6'-0 3 ⁄4" (1848)
4'-3 1 ⁄ 8" (1299)
8'-0 3 ⁄4" (2457)
8'-0 3 ⁄4" (2457)
Unobstructed Glass
31 1 ⁄ 8" (791)
31 1 ⁄ 8" (791)
31 1 ⁄ 8" (791)
43 1 ⁄ 8" (1095)
43 1 ⁄ 8" (1095)
43 1 ⁄ 8" (1095)
(single panel only)
Viewed from the exterior. Arrow indicates direction of panel operation. Stationary (S) doors can be used as sidelight. Grille patterns
73 7 ⁄ 8" (1876)
6'-10 7 ⁄ 8" (2105)
6'-10 3 ⁄ 8" (2092)
an individual unit or as a shown on page 245.
PS61611R
PS43611S
PS81611L
PS81611R
PS6180R
PS4380S
PS8180L
PS8180R
87" (2210)
8'-0" (2438)
7'-11 1 ⁄ 2" (2426)
PS33611S PS61611L
PS3380S
PS6180L
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters. • For doors with blinds between the glass, unobstructed glass width dimension is reduced.
Clear Opening
Two-Panel
= (width ÷ 2) - 7.5" (191) Height = height - 4.155" (106) Width
Minimum R.O.
3 13 ⁄ 16" (97)
Head
Available in 1 ⁄ 8" (3) increments between minimum and maximum
4 11 ⁄ 16"
widths and heights shown. Some restrictions apply. Measurement(97) guide can be found at andersenwindows.com/measure. Width
= width + 3/4" (19) height + 1/2" (13)
Height =
Unobstr. Glass
Single-Panel
= width − 7.25" (184) Height = height − 8.562" (217) Width
Two-Panel Width
= width − 9.75" (248) height − 8.562" (217)
Height =
244
Unit Dimension Height
CUSTOM WIDTHS
Minimum Rough Opening Height
CUSTOM WIDTHS CUSTOM HEIGHTS
56 3 ⁄4" to 96" (1441) (2438)
74" to 95 1 ⁄ 2" (1880) (2426)
30 3 ⁄4" to 50 3 ⁄ 8" (781) (1279)
CUSTOM HEIGHTS
74" to 95 1 ⁄ 2" (1880) (2426)
Custom Sizes and Specification Formulas
• Dimensions in parentheses are in millimeters. • Clear Opening formulas provide dimensions for determining area available for egress. Vent opening, or area available for passage of air, is equal to clear opening. Minimum R.O. (minimum rough opening) formulas provide minimum rough opening width and height dimensions. Unobstr. Glass (unobstructed glass) formulas provide dimensions for determining area available for passage of light.
Sill
200 Series ® Perma-Shield Gliding Patio Doors
Order Designation Description Viewed from the exterior.
PS
51168 L
PS
Left Perma-Shield® Gliding Gliding Patio Door Door Rough Opening
51168 R
Right Perma-Shield® Gliding Gliding Patio Door Door Rough Opening
Stationary Perma-Shield® Gliding Patio Door Area Specifications
Two-Panel Perma-Shield® Gliding Patio Door Opening and Area Specifications Clear Opening in Full Open Position Door Number
Clear Opening Area Sq. Ft./(m2)
PS5068
11.64
(1.08)
22 1/8”
(562)
75 3/4”
(1924)
24.90
(2.31)
11.64
(1.08)
32.71
(3.04)
PS51168
14.60
(1.36)
27 3/4”
(705)
75 3/4”
(1924)
30.40
(2.82)
14.60
(1.36)
38.92
(3.62)
PS33611
16.00
(1.49)
21.95
(2.04)
PS61611
15.56
(1.45)
28 1/2”
(724)
78 5/8”
(1997)
32.40
(3.01)
15.56
(1.45)
41.19
(3.83)
PS43611
22.10
(2.05)
28.82
(2.68)
PS81611
22.11
(2.05)
40 1/2”
(1029)
78 5/8”
(1997)
44.20
(4.11)
22.11
(2.05)
54.92
(5.10)
PS6180
18.16
(1.69)
28 1/2”
(724)
91 3/4”
(2330)
37.60
(3.49)
18.16
(1.69)
47.75
(4.44)
PS8180
25.80
(2.40)
40 1/2”
(1029)
91 3/4”
(2330)
52.10
(4.84)
25.80
(2.40)
63.67
(5.92)
Width Inches/(mm)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Area Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
Door Number
Glass Area Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
• Dimensions in parentheses are in square meters.
• Dimensions in parentheses are in millimeters or square meters.
Grille Patterns Prairie A
Colonial
Modified Colonial
Modified Colonial SCR (Simulated Check Rail)
Tall Fractional
Tall Fractional SCR (Simulated Check Rail)
Short Fractional
Short Fractional SCR (Simulated Check Rail)
Number of lights and overall pattern varies with panel size. Patterns are not available
Perma-Shield® Gliding Patio Doors
in all configurations. For more information on divided light see page 11 or visit andersenwindows.com/grilles.
Perma-Shield® Gliding Patio Door Details Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
2 1 ⁄ 16" (52)
1 3 ⁄ 8" ⁄ 16" 3 13(35) Jamb(97) Depending on Panel Adjustment
1 3 ⁄ 8" (35) (44) 1 3 ⁄ 4" Jamb
Head 4 11 ⁄ 16"
(119) Depending on Panel Adjustment
3 9 ⁄ 16" (90)
Horizontal Section Stationary
Jamb
CL
4 9 ⁄ 16" (116) 1 5 ⁄ 16" (33) 3 1 ⁄ 2" (89)
2 5 ⁄ 8" 3 9 ⁄ 16" (67) (90) Dim. to Center Line of Meeting Stiles Dim. to Center Line of Meeting Stiles
3 9 ⁄ 16" (90)
1 5 ⁄ 16" (33) 3 ⁄ 4" (19) 3 ⁄ 8" 3 ⁄ 8" Unit Dimension Width Andersen® Andersen (10) (10) Oak Minimum Rough Opening Width or Maple Threshold Sill Support Sill
Meeting Stile
Jamb
Clear Opening Height
Unit Dimension Height
Minimum Rough Opening Height
1" (25)
3 ⁄ 8" (10)
Unit Dimension Width Minimum Rough Opening Width
3 ⁄ 8" (10)
Horizontal Section Two-Panel
• Light-colored areas are parts included with window. Dark-colored areas are additional Andersen® parts required to complete window assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Dimensions in parentheses are in millimeters.
245
PERMA-SHIELD GLIDING PATIO DOORS ®
Perma-Shield® Gliding Patio Door Details
Vertical Joining Detail
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 Overall Door Dimension Width
4 11 ⁄ 16" (97)
Sill
Clear Opening Height
2 1 ⁄ 16" (52)
Head
Vertical Section Stationary
(35)
Head 4 11 ⁄ 16" (119) Depending 3 9 ⁄ 16" 3 9 ⁄ 16" on Panel(90) (90) Adjustment 3 ⁄ 8" Unit Dimension Width (10)Andersen Minimum Rough Opening Width Sill Support Sill
1 3 ⁄ 4" (44) Jamb
Meeting Stile
plus 1 ⁄ 16" (1.5) for each join.
CL
Overall door width plus 3 ⁄ 4" (19). 1 3 ⁄ 8" (35)
1 ⁄ 16"
(1.5)
1 3 ⁄ 8" (35)
3 1 ⁄ 2" (89)
1 5 ⁄ 16" (33) 3 ⁄ 4" (19) 3 ⁄ 8" Andersen® Oak (10) or Maple Threshold
2 5 ⁄ 8" (67) Dim. to Center Line of Meeting Stiles Dim. to C
Unit Dimension Width
3 ⁄ 8"
Minimum Rough Opening W
(10)
Vertical Section 1 ⁄ 16"
1 ⁄ 4"
(6) 1 13 ⁄ 16" (46)
Clear Opening Details
Jamb door widths Sum of individual
Overall Rough Opening Width
Clear Opening Height
Head
1 3 ⁄ 8"
(35) 3 13 ⁄ 16" (97) Jamb Depending on Panel Adjustment Unit Dimension Height
3 13 ⁄ 16" (97)
Minimum Rough Opening Height
1" (25) Unit Dimension Height
Minimum Rough Opening Height
1 3 ⁄ 8"
(1.5)
Horizontal Section Perma-Shield® Gliding to Perma-Shield Gliding
Scale 11 ⁄ 2" (38) = 1'-0" (305) Sill— 1:8 Active Panel
Stationary Panel
Vertical Joining Detail – LVL
Head
Clear Opening Width
Overall Door Dimension Width Sum of individual door widths plus 3 ⁄ 4" (19) for each join. 1 ⁄ 4" (6) 1 13 ⁄ 16" (46)
Insect Screen Sill 1 ⁄ 16" (1.5) 3 ⁄ 8" (35) 1 3 ⁄ 8" (35) Vertical 1Section Insect Screen Latch Active Panel
Horizontal Section Two-Panel
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Clear Opening Height
Insect Screen Latch
Stationary Panel
Overall Rough Opening Width Overall door width plus 3 ⁄ 4" (19). 1 3 ⁄ 8" (35)
3 ⁄ 4"
(19)
1 3 ⁄ 8" (35)
Anders Filler an Vinyl Tri
Ramped Sill Detail
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 8
Gliding insect screen cannot be used with ramped sill.
5 ⁄ 16"
1 Clear Opening Width
(8) 1 ⁄ 16"
(1.5)
Insect Screen 1 7 ⁄ 16" (37)
3 ⁄ 4"
(19)
Horizontal Section Perma-Shield® Gliding to Perma-Shield Gliding
1 ⁄ 4"
(6) Vertical Section
Separate Rough Openings Detail 3 ⁄ 4" (19) Scale3 11 ⁄ 2"
1 ⁄ 8" (35)(38)
1 3 ⁄ 8" (35)
= 1'-0"1 3(305) ⁄ 8" (35)— 1:8
2" (51)
1 3 ⁄ 8" (35)
To meet structural requirements or to achieve a wider joined appearance, doors may be installed into separate rough openings having
Andersen® Filler and Vinyl Trim
vertical support (by others) in combination with Andersen® exterior filler and exterior vinyl trim. 3 ⁄ 4"
(19)
2" (51)
Vertical Support by Others
Horizontal Section Perma-Shield® Gliding and Perma-Shield Gliding
246
Andersen does not recommend joining of receiver jamb to receiver jamb. For more joining information see the combination designs section starting on page 255.
• Light-colored areas are parts included with door. Darkcolored areas are additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Andersen recommends installation of doors into separate rough openings. Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. • Dimensions in parentheses are in millimeters.
200 Series Hinged Patio Doors – Inswing
HINGED PATIO DOORS – INSWING
SECTION REFERENCE Tables of Sizes .................... 250-251 Specifications ............................ 252 Grille Patterns ............................ 253 Door Details ........................253-254 Joining Detail ............................. 254 Combination Designs ................. 255 Performance Data ...................... 269 Warranty .............................290-291 247
HINGED PATIO DOORS – INSWING F B
FEATURES
J D
Frame A A unique anodized aluminum sill design controls water and helps funnel it away from the door to minimize water infiltration. Also available with optional bronze anodized sill.
Hook Deadbolt
J Glass options include:
G C A E
• Low-E tempered glass • Low-E HeatLock™ tempered glass • Low-E Sun tempered glass • Low-E SmartSun™ tempered glass • Low-E SmartSun™ HeatLock™ tempered glass • Dual-pane tempered glass Additional glass options are available. Contact your Andersen supplier.
C A preservative-treated wood subframe with a frame end protector at the sill resists rot and provides long-lasting* protection and performance.
Locking System
maximum weather resistance.
H
B Exterior frame is clad with aluminum, which maintains an attractive appearance while minimizing maintenance. Frame is predrilled for convenient installation. Specially designed plugs cover the installation screws for a clean appearance.
Glass I Panels are silicone bed glazed for
I
A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite.
Effective Weatherstripping
D Durable Santoprene® weatherstripping on the frame provides effective protection against water and air infiltration.
E Unique sweep/sill interface completes the perimeter protection and allows for easier operation of the door and long-lasting* weatherstrip (no friction of the sweep against the sill).
Panel F Durable low-maintenance interior
EXTERIOR
and exterior resist weather and rot. Sturdy fiberglass construction provides longlasting* performance. Insulated bottom rail enhances energy efficiency.
Durable rubberized Santoprene® gasket-type weatherstripping is applied to the frame (sides and head jamb) and engages when the door panel is closed. The panel has a sweep system at the sill that completes the perimeter protection.
G Traditional French door styling
Adjustable Hinges
features a tall bottom rail and wide stiles. Panel is built to tolerances within 1/32" (1) for smooth operation and maximum durability.
H Unique corner keys in the panel allow for tight, attractive corners.
Hook deadbolt lock comes pre-installed, reducing installation time. The mortised lock and hook design provides strength and added security compared to bored locks with standard deadbolts. Multi-point locks are standard on 7'-6" (2286) and 8'-0" (2438) height doors. Multi-point locks can be ordered for 6'-8" (2032) and 6'-11" (2108) doors as an option. Contact your Andersen supplier for availability.
Adjustable hinges help provide a weathertight seal and smooth operation. Available in antique brass, bright brass, satin nickel, oil rubbed bronze and white.
White
Sandtone
INTERIOR
Terratone
White
HARDWARE FINISHES
Antique Brass
Black
Bright Brass
Gold Dust
Oil Rubbed Polished Bronze Chrome
Brushed Chrome
Distressed Distressed Bronze Nickel
Satin Nickel
Stone
White
Distressed bronze and oil rubbed bronze are "living" finishes that will change with time and use.
HINGED PATIO DOOR HARDWARE OPTIONS Bold name denotes finish shown. **
YUMA®
ENCINO ®
ANVERS ®
NEWBURY ®
COVINGTON ™
WHITMORE ®
ALBANY
TRIBECA®
Distressed Bronze Distressed Nickel
Distressed Bronze Distressed Nickel
Bright Brass Oil Rubbed Bronze Satin Nickel
Antique Brass Bright Brass Brushed Chrome Oil Rubbed Bronze Polished Chrome Satin Nickel
Antique Brass Bright Brass Oil Rubbed Bronze
Antique Brass Bright Brass Oil Rubbed Bronze Satin Nickel
Black Gold Dust Stone White
Stone White
* Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 200 Series Limited Warranty. ** Hardware sold separately. “Santoprene” is a registered trademark of Advanced Elastomer Systems, L.P. Dimensions in parentheses are in millimeters.
Printing limitations prevent exact duplication of colors and finishes. See your Andersen supplier for actual color and finish samples.
248
Tribeca and Albany hardware are zinc diecast with powder-coated durable finish. Other hardware is solid forged brass. Mix-and-match interior and exterior style and finish options are available. Bright brass and satin nickel finishes feature a 10-year limited warranty.
ACCESSORIES Sold Separately Frame 9/16"
Choose either a 6 (167) or 4 9/16" (116) jamb depth. Also available with accessible door.
Extension Jambs Standard jamb depth is 4 9/16" (116). A 6 9/16" (167) frame depth is also available. Prefinished White interior extension jambs available in 1⁄16" (1.5) increments between 5 1⁄16" (129) and 7 1⁄8" (181). Interior extension jambs on inswing units will restrict the full opening of the door. These extension jambs can also be added to 6 9/16" (167) jambs.
Hardware 6 9/16" (167) Jamb Depth
Exterior Keyed Lock A six-pin key cylinder lock is available in styles and finishes that coordinate with hardware. This lock allows the hinged patio door to be locked and unlocked from the exterior. Handle Extension
4
9/16"
(116) Jamb Depth
Sill For an optional look, a bronze anodized sill is also available.
Accessible Door
Extends interior door handle an additional 1" (25) from the door panel to accommodate interior blinds or shades. Kit includes one handle extender and spindle. A second extender may be added to the spindle to increase the length an additional 1" (25) to a 2" (51) total extension. Extenders are available in finishes that coordinate with hardware. Strike Plate Extensions
Andersen offers a single-panel accessible door that is 3'-2 1/8" (968) wide and includes a low-threshold sill [1/2" (51) high]. Bottom rail height is 10 1/4" (260). Available in bronze anodized finish only. Low threshold sill is not available for other door widths.
Grilles
Construction Lock
Bright brass, antique brass, polished chrome, oil rubbed bronze, brushed chrome and satin nickel strike plate extensions are available for single-hinge doors.
Grilles are available in a variety of configurations and widths. For patio door grille patterns see page 253.
Exterior Trim This product is available with Andersen® Exterior Trim. See pages 215-220 for details. This hardware can be used on all Andersen® hinged doors to help secure the jobsite during the construction phase of the project. It features an undersized escutcheon plate, which makes on-site finishing easier. Shown on 400 Series hinged patio door.
Insect Screens All insect screens have a long-lasting* fiberglass screen mesh with a charcoal finish and are color matched to the exterior of the door unless otherwise specified. Gliding Insect Screen
CAUTION: • Painting and staining may cause damage to rigid vinyl. • 200 Series doors in Terratone color may be painted any color lighter than Terratone color using quality oil-base or latex paint. Submit color samples to Andersen for approval when painting Terratone any color darker than Terratone. • Do not paint 200 Series doors with White or Sandtone exterior colors. • Creosote-based stains should not come in contact with Andersen products. • Do not paint weatherstripping. • Abrasive cleaners or solutions containing corrosive solvents should not be used on Andersen products. • For vinyl painting instructions and preparation, contact your Andersen supplier. • Andersen does not warrant the adhesion or performance of homeowner–applied paint over vinyl or other factory–coated surfaces.
Available for two-panel active/stationary doors. Features Delrin® material injection molded bottom rollers with self-contained leveling adjusters. Hinged Insect Screens
Available for the following wall thicknesses: • 5 1/4" (133) • 6 9/16" (167) • 7 1/8" (181)
Available for single-panel hinged doors and two-panel jamb-hinged doors.
For more information about glass and grilles see pages 10-11. For more information about combination designs, product performance, installation accessories and warranty see pages 255-291 or visit
NOTE: Andersen® patio doors are not intended for use as entrance doors.
andersenwindows.com
"Delrin" is a registered trademark of E.I. du Pont de Nemours and Company.
*Visit andersenwindows.com/warranty or contact your Andersen supplier for details on the 200 Series Limited Warranty. Dimensions in parentheses are in millimeters.
249
200 Series Hinged Patio Doors – Inswing
Jamb Depth
HINGED PATIO DOORS – INSWING Table of Hinged Inswing Patio Door Sizes Scale 1 ⁄ 8" = 1'-0" (1:96) Door Dimension
2'-0 1 ⁄ 2" (620)
4'-0" (1219)
4'-0" (1219)
Minimum Rough Opening
2'-1" (634)
4'-1" (1242)
4'-1" (1242)
Unobstructed Glass
13 1 ⁄4" (336)
13 1 ⁄4" (336)
13 1 ⁄4" (336)
(single panel only)
Stationary (S) doors can be 4 heights
ISPD2168S ISPD21611S ISPD2176S ISPD2180S
ISPD4168APLR ISPD41611APLR ISPD4176APLR ISPD4180APLR
used as an individual unit or
ISPD4168PALR ISPD41611PALR ISPD4176PALR ISPD4180PALR
as a sidelight.
Door Dimension
2'-6 1 ⁄ 8" (765)
2'-6 1 ⁄ 8" (765)
2'-6 1 ⁄ 8" (765)
4'-11 1 ⁄4" (1504)
4'-11 1 ⁄4" (1504)
4'-11 1 ⁄4" (1504)
4'-11 1 ⁄4" (1504)
Minimum Rough Opening
2'-7" (787)
2'-7" (787)
2'-7" (787)
5'-0" (1524)
5'-0" (1524)
5'-0" (1524)
5'-0" (1524)
Unobstructed Glass
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
18 7 ⁄ 8" (479)
ISPD5068SAL ISPD50611SAL ISPD5076SAL ISPD5080SAL
ISPD5068APLR ISPD50611APLR ISPD5076APLR ISPD5080APLR
ISPD5068PALR ISPD50611PALR ISPD5076PALR ISPD5080PALR
(single panel only)
Grille patterns shown on page 253.
4 heights
ISPD2768S ISPD27611S ISPD2776S ISPD2780S
ISPD2768AR ISPD27611AR ISPD2776AR ISPD2780AR
ISPD2768AL ISPD5068ASR ISPD27611AL ISPD50611ASR ISPD2776AL ISPD5076ASR ISPD2780AL ISPD5080ASR
Door Dimension
2'-8 1 ⁄ 8" (816)
2'-8 1 ⁄ 8" (816)
2'-8 1 ⁄ 8" (816)
5'-3 1 ⁄4" (1607)
5'-3 1 ⁄4" (1607)
5'-3 1 ⁄4" (1607)
5'-3 1 ⁄4" (1607)
Minimum Rough Opening
2'-9" (838)
2'-9" (838)
2'-9" (838)
5'-4" (1626)
5'-4" (1626)
5'-4" (1626)
5'-4" (1626)
Unobstructed Glass
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
20 7 ⁄ 8" (530)
ISPD5468APLR ISPD54611APLR ISPD5476APLR ISPD5480APLR
ISPD5468PALR ISPD54611PALR ISPD5476PALR ISPD5480PALR
(single panel only)
4 heights
ISPD2968S ISPD29611S ISPD2976S ISPD2980S
ISPD2968AR ISPD29611AR ISPD2976AR ISPD2980AR
ISPD2968AL ISPD29611AL ISPD2976AL ISPD2980AL
ISPD5468ASR ISPD54611ASR ISPD5476ASR ISPD5480ASR
ISPD5468SAL ISPD54611SAL ISPD5476SAL ISPD5480SAL
Door Dimension
3'-0 1 ⁄ 8" (918)
3'-0 1 ⁄ 8" (918)
3'-0 1 ⁄ 8" (918)
5'-11 1 ⁄4" (1810)
5'-11 1 ⁄4" (1810)
5'-11 1 ⁄4" (1810)
5'-11 1 ⁄4" (1810)
Minimum Rough Opening
3'-1" (940)
3'-1" (940)
3'-1" (940)
6'-0" (1829)
6'-0" (1829)
6'-0" (1829)
6'-0" (1829)
Unobstructed Glass
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
24 7 ⁄ 8" (632)
(single panel only)
4 heights
ISPD3168S ISPD31611S ISPD3176S ISPD3180S
250
ISPD3168AR ISPD31611AR ISPD3176AR ISPD3180AR
ISPD3168AL ISPD31611AL ISPD3176AL ISPD3180AL
ISPD6068ASR ISPD60611ASR ISPD6076ASR ISPD6080ASR
ISPD6068SAL ISPD60611SAL ISPD6076SAL ISPD6080SAL
ISPD6068APLR ISPD60611APLR ISPD6076APLR ISPD6080APLR
ISPD6068PALR ISPD60611PALR ISPD6076PALR ISPD6080PALR
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
Door Dimension
3'-2 1 ⁄ 8" (968)
3'-2 1 ⁄ 8" (968)
Minimum Rough Opening
3'-3" (991)
3'-3" (991)
Accessibility Width Patio Door Also Available
Unobstructed Glass
26 7 ⁄ 8" (683)
26 7 ⁄ 8" (683)
For easier access, this single panel door offers a 32" (813)
(single panel only)
79 1 ⁄ 2" (2019)
8'-0" (2438)
7'-11 1 ⁄ 2" (2426)
73 1 ⁄ 2" (1867) ISPD x x 76
ISPD x x 611
200 Series Hinged Patio Doors – Inswing
ISPD x x 68
7'-6" (2286)
7'-5 1 ⁄ 2" (2273)
66 3 ⁄ 8" (1686)
6'-11" (2108)
6'-10 3 ⁄ 8" (2092)
63 1 ⁄ 2" (1613)
6'-8" (2032)
6'-7 1 ⁄ 2" (2019)
Unobstructed Glass
Minimum Rough Opening
Door Dimension
Four Patio Door Heights
ISPD x x 80
clear opening when the panel is open 90,° a 1 ⁄ 2" (13) threshold, 10.263"
and a bottom rail height of 10 1 ⁄ 4" (260). This door has a Low threshold sill
limited water rating (LW) due to the low-threshold sill.
3 heights
1 ⁄ 2"
1 2 3
ISPD33611AR ISPD33611AL ISPD3376AR ISPD3376AL ISPD3380AR ISPD3380AL
• "Door Dimension" always refers to outside frame to frame dimension. • "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages 288-289 for more details. • Dimensions in parentheses are in millimeters.
Order Designation Description Viewed from the exterior.
ISPD
6068 S
Hinged Inswing Patio Door
A
Stationary Panel
Door Rough Opening
L Left Hinged
Active Panel
ISPD
6068 A
Hinged Inswing Patio Door
S R
Active Panel
Door Rough Opening
Right Hinged
Stationary Panel
ISPD
6068 A
Hinged Inswing Patio Door
P
Active Panel (panel used most often)
Door Rough Opening
L
R
Left Hinged
Passive Panel
Right Hinged
251
HINGED PATIO DOORS – INSWING Hinged Inswing Patio Door Opening and Area Specifications Door Number
Number of Panels in Open Position*
Clear Opening Maximums Clear Opening Area Sq. Ft./(m2)
90° Width Inches/(mm)
Width Inches/(mm)
Height Inches/(mm)
Glass Area Sq. Ft./(m2)
Vent Area Sq. Ft./(m2)
Overall Door Area Sq. Ft./(m2)
ISPD2768
1
13.52
(1.26)
25 3/8"
(644)
27 9/16"
(701)
76 3/4"
(1949)
8.32
(0.77)
13.52
(1.26)
16.61
ISPD2968
1
14.58
(1.36)
27 3/8"
(695)
29 9/16"
(752)
76 3/4"
(1949)
9.20
(0.85)
14.58
(1.36)
17.72
(1.65)
ISPD3168
1
16.71
(1.55)
31 3/8"
(797)
33 9/16"
(853)
76 3/4"
(1949)
10.96
(1.02)
16.71
(1.55)
19.93
(1.85)
ISPD4168
2
21.87
(2.03)
41"
(1042)
45 1/2"
(1156)
76 3/4"
(1949)
11.67
(1.08)
21.87
(2.03)
26.50
(2.46)
ISPD4168
1
10.52
(0.98)
19 3/4"
(501)
21 15/16"
(558)
76 3/4"
(1949)
11.67
(1.08)
10.52
(0.98)
26.50
(2.46)
ISPD5068
2
27.87
(2.59)
52 1/4"
(1328)
56 3/4"
(1441)
76 3/4"
(1949)
16.63
(1.55)
27.87
(2.59)
32.71
(3.04)
ISPD5068
1
13.52
(1.26)
25 3/8"
(644)
27 9/16"
(701)
76 3/4"
(1949)
16.63
(1.55)
13.52
(1.26)
32.71
(3.04)
ISPD5468
2
30.00
(2.79)
56 1/4"
(1430)
60 3/4"
(1543)
76 3/4"
(1949)
18.39
(1.71)
30.00
(2.79)
34.92
(3.24)
ISPD5468
1
14.58
(1.36)
27 3/8"
(695)
29 9/16"
(752)
76 3/4"
(1949)
18.39
(1.71)
14.58
(1.36)
34.92
(3.24)
ISPD6068
2
34.26
(3.18)
64 1/4"
(1633)
68 3/4"
(1746)
76 3/4"
(1949)
21.92
(2.04)
34.26
(3.18)
39.34
(3.65)
ISPD6068
1
16.71
(1.55)
31 3/8"
(797)
33 9/16"
(853)
76 3/4"
(1949)
21.92
(2.04)
16.71
(1.55)
39.34
(3.65)
ISPD27611
1
14.02
(1.30)
25 3/8"
(644)
27 9/16"
(701)
79 5/8"
(2022)
8.69
(0.81)
14.02
(1.30)
17.21
(1.60)
ISPD29611
1
15.13
(1.41)
27 3/8"
(695)
29 9/16"
(752)
79 5/8"
(2022)
9.61
(0.89)
15.13
(1.41)
18.36
(1.71)
ISPD31611
1
17.34
(1.61)
31 3/8"
(797)
33 9/16"
(853)
79 5/8"
(2022)
11.45
(1.06)
17.34
(1.61)
20.65
(1.92)
ISPD33611**
1
18.68
(1.74)
33 3/8"
(847)
35 9/16"
(904)
80 5/8"
(2048)
11.45
(1.06)
18.68
(1.74)
21.79
(2.03)
ISPD41611
2
22.69
(2.11)
41"
(1042)
45 1/5"
(1156)
79 5/8"
(2022)
12.20
(1.13)
22.69
(2.11)
27.46
(2.55)
ISPD41611
1
10.91
(2.01)
19 3/4"
(501)
21 15/16"
(558)
79 5/8"
(2022)
12.20
(1.13)
10.91
(1.01)
27.46
(2.55)
ISPD50611
2
28.90
(2.69)
52 1/4"
(1328)
56 3/4"
(1441)
79 5/8"
(2022)
17.38
(1.62)
28.91
(2.69)
33.89
(3.15)
ISPD50611
1
14.02
(1.30)
25 3/8"
(644)
27 9/16"
(701)
79 5/8"
(2022)
17.38
(1.62)
14.02
(1.30)
33.89
(3.15)
ISPD54611
2
31.12
(2.89)
56 1/4"
(1430)
60 3/4"
(1543)
79 5/8"
(2022)
19.23
(1.79)
31.12
(2.89)
36.18
(3.36)
ISPD54611
1
15.13
(1.41)
27 3/8"
(695)
29 9/16"
(752)
79 5/8"
(2022)
19.23
(1.79)
15.13
(1.41)
36.18
(3.36)
ISPD60611
2
35.55
(3.30)
64 1/4"
(1633)
68 3/4"
(1746)
79 5/8"
(2022)
22.91
(2.13)
35.55
(3.30)
40.76
(3.79)
ISPD60611
1
17.34
(1.61)
31 3/8"
(797)
33 9/16"
(853)
79 5/8"
(2022)
22.91
(2.13)
17.34
(1.61)
40.76
(3.79)
ISPD2776
1
15.28
(1.42)
25 3/8"
(644)
27 9/16"
(701)
86 3/4"
(2203)
9.63
(0.89)
15.28
(1.42)
18.70
(1.74)
ISPD2976
1
16.48
(1.53)
27 3/8"
(695)
29 9/16"
(752)
86 3/4"
(2203)
10.65
(0.99)
16.48
(1.53)
19.95
(1.85)
ISPD3176
1
18.89
(1.76)
31 3/8"
(797)
33 9/16"
(853)
86 3/4"
(2203)
12.69
(1.18)
18.89
(1.76)
22.43
(2.08)
ISPD3376**
1
20.33
(1.89)
33 3/8"
(847)
35 9/16"
(904)
87 3/4"
(2229)
12.69
(1.18)
20.33
(1.89)
23.68
(2.20)
ISPD4176
2
24.72
(2.29)
41"
(1042)
45 1/5"
(1156)
86 3/4"
(2203)
13.51
(1.26)
24.72
(2.30)
29.83
(2.77)
ISPD4176
1
11.89
(1.11)
19 3/4"
(501)
21 15/16"
(558)
86 3/4"
(2203)
13.51
(1.26)
11.89
(1.11)
29.83
(2.77)
ISPD5076
2
31.50
(2.93)
52 1/4"
(1328)
56 3/4"
(1441)
86 3/4"
(2203)
19.25
(1.79)
31.50
(2.93)
36.83
(3.42)
ISPD5076
1
15.28
(1.42)
25 3/8"
(644)
27 9/16"
(701)
86 3/4"
(2203)
19.25
(1.79)
15.28
(1.42)
36.83
(3.42)
ISPD5476
2
33.91
(3.15)
56 1/4"
(1430)
60 3/4"
(1543)
86 3/4"
(2203)
21.29
(1.98)
33.91
(3.15)
39.31
(3.65)
ISPD5476
1
16.48
(1.53)
27 3/8"
(695)
29 9/16"
(752)
86 3/4"
(2203)
21.29
(1.98)
16.48
(1.53)
39.31
(3.65)
ISPD6076
2
38.73
(3.60)
64 3/8"
(1633)
68 3/4"
(1746)
86 3/4"
(2203)
25.37
(2.36)
38.73
(3.60)
44.28
(4.11)
ISPD6076
1
18.89
(1.76)
31 3/8"
(797)
33 9/16"
(853)
86 3/4"
(2203)
25.37
(2.36)
18.90
(1.76)
44.28
(4.11)
ISPD2780
1
16.33
(1.52)
25 3/8"
(644)
27 9/16"
(701)
92 3/4"
(2356)
10.41
(0.97)
16.33
(1.52)
19.96
(1.85)
ISPD2980
1
17.62
(1.64)
27 3/8"
(695)
29 9/16"
(752)
92 3/4"
(2356)
11.52
(1.07)
17.62
(1.64)
21.29
(1.98)
ISPD3180
1
20.20
(1.88)
31 3/8"
(797)
33 9/16"
(853)
92 3/4"
(2356)
13.72
(1.28)
20.20
(1.88)
23.94
(2.22)
ISPD3380**
1
21.72
(2.02)
33 3/8"
(847)
35 9/16"
(904)
93 3/4"
(2381)
13.72
(1.28)
21.72
(2.02)
25.26
(2.35)
ISPD4180
2
26.43
(2.46)
41"
(1042)
45 1/5"
(1156)
92 3/4"
(2356)
14.62
(1.36)
26.43
(2.46)
31.83
(2.96)
ISPD4180
1
12.71
(1.18)
19 3/4"
(501)
21 15/16"
(558)
92 3/4"
(2356)
14.62
(1.36)
12.71
(1.81)
31.83
(2.96)
ISPD5080
2
33.68
(3.13)
52 1/4"
(1328)
56 3/4"
(1441)
92 3/4"
(2356)
20.82
(1.94)
33.68
(3.13)
39.29
(3.65)
ISPD5080
1
16.33
(1.52)
25 3/8"
(644)
27 9/16"
(701)
92 3/4"
(2356)
20.82
(1.94)
16.33
(1.52)
39.29
(3.65)
ISPD5480
2
36.25
(3.37)
56 1/4"
(1430)
60 3/4"
(1543)
92 3/4"
(2356)
23.03
(2.14)
36.25
(3.37)
41.95
(3.90)
ISPD5480
1
17.62
(1.64)
27 3/8"
(695)
29 9/16"
(752)
92 3/4"
(2356)
23.03
(2.14)
17.62
(1.64)
41.95
(3.90)
ISPD6080
2
41.40
(3.85)
64 1/4"
(1633)
68 3/4"
(1746)
92 3/4"
(2356)
27.44
(2.55)
41.40
(3.85)
47.25
(4.39)
ISPD6080
1
20.20
(1.88)
31 3/8"
(797)
33 9/16"
(853)
92 3/4"
(2356)
27.44
(2.55)
20.20
(1.88)
47.25
(4.39)
• Dimensions in parentheses are in millimeters or square meters. *For two-panel AP/PA doors with only one panel open, clear opening is based on the active panel open and the passive panel closed. **For easier access, a special option is available that offers a 32" (813) clear opening width at 90° and a 1/2" (13) threshold. Contact your Andersen® supplier for availability.
252
(1.54)
Grille Patterns Prairie A
Colonial
Modified Colonial
Modified Colonial SCR (Simulated Check Rail)
Tall Fractional
Tall Fractional SCR (Simulated Check Rail)
Short Fractional
Number of lights and overall
Short Fractional SCR (Simulated Check Rail)
pattern varies with panel size. Patterns are not available in
Hinged Inswing Patio Doors
all configurations. Specified patterns are also available. For more information on divided light see page 11 or visit andersenwindows.com/grilles.
Hinged Inswing Patio Door Details — 4 9 ⁄ 16" (116) and 6 9 ⁄ 16" (167) Jamb Depth Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 Handle Hardware Handle Hardware
1 5 ⁄ 16" 1 5 ⁄ 16" (33) (33)
3 ⁄ 4" (19) 3 ⁄ 4" (19)
1 5 ⁄ 16" 1 5 ⁄ 16" (33) (33)
3 ⁄ 8" (10) 3 ⁄ 8" (10)
Insect Screen
Active Panel Jamb Stationary Jamb Panel Active Panel Stationary Panel 5 1 ⁄ 8" (130) 5 1 ⁄ 8" (130) 5 5 ⁄ 8" (143) 5 5 ⁄ 8" (143) 5 1 ⁄ 8" Width (130) 5 1 ⁄ 8" (130) 5 5 ⁄ 8" (143) 5 5 ⁄ 8" (143) Unit Dimension 3 ⁄ 8" (10) 3 ⁄ 8" (10) Minimum Rough Opening Width
Andersen® Insect Screen
6 9 ⁄ 16" (167) Jamb Depth
1 5 ⁄ 16" (33) 3 ⁄ 4" (19) 3 ⁄ 4" (19)
4 9 ⁄ 16" (116) " (116) 4 9 ⁄ 16 Jamb Depth Jamb Depth
1 5 ⁄ 16" Active Panel Stationary Panel 1 5 ⁄ 16" (33) ⁄ 8" (130) 5 1 ⁄ 8" (130) 5 1Astragal 5 5 ⁄ 8" (143) 5 5 ⁄ 8" (143) (33) Jamb Jamb Astragal Jamb Jamb 3 ⁄ 4" (19) 3 ⁄ 4" (19) 5 5 50 = 2'-5 ⁄ 8" (752)* 50 = 2'-5 ⁄ 8" (752)* CL = 2'-5 " (752)* 5 ⁄ 85"⁄ 8(803)* " (752)* = 2'-5 5 ⁄ 85"⁄ 8(803)* CL 5450 = 2'-7 5450 = 2'-7 = 2'-75 ⁄ 58"⁄ 8(905)* " (803)* = 2'-75 ⁄ 58"⁄ 8(905)* " (803)* 60 54 = 2'-11 60 54 = 2'-11 5 5 ⁄ 60 = 2'-11 8" (905)* 60 = 2'-11 ⁄ 8" (905)* Unit Dimension Width 3 ⁄ 8" (10) 3 ⁄ 8" (10) 4 9 ⁄ 16" (116) Unit Dimension Width 3 ⁄ 8" (10) 3 ⁄ 8" (10) Minimum Rough Opening Width Jamb Depth Minimum Rough Opening Width Horizontal Section Two-PanelAstragal
1 5 ⁄ 16" (33)
1 5 ⁄ 16" (33)
4 9 ⁄ 16" (116) Jamb Depth Head Head
Interior Trim by Interior Others Trim Head by Others
Unit Dimension Height
Horizontal Section Single-Panel
Jamb Jamb
Minimum Rough Opening Height Minimum Rough Opening Height Unit Dimension Height Unit Dimension Height Minimum Rough Opening Height
Handle Hardware Jamb Jamb Unit Dimension Width 3 ⁄ 8" (10) Unit Dimension Width 3 ⁄ 8" (10) Minimum Rough Opening Width Minimum Rough Opening Width
Andersen® ® Andersen Insect Screen Insect Screen
6 9 ⁄ 16" (167) 6 9 ⁄ 16 " (167) Jamb Depth Jamb Depth
Insect Insect Screen Screen
4 9 ⁄ 16" (116) 4 9 ⁄ 16 " (116) Jamb Depth Jamb Depth
Sill Sill Interior Trim by Others
Sill Vertical Section
Jamb 50 = 2'-5 5 ⁄ 8" (752)* 50 = 2'-5 5 ⁄ 8" (752)* CL 54 flange. = 2'-7 5 ⁄ 8" (803)* 54 =measurements 2'-7 5 ⁄ 8" (803)* • 4 9/16" (116) and 6 9/16" (167) jamb depth are from backside of installation 5 ⁄required 5 ⁄ 8" (905)*areas are additional Andersen ® parts 60 = 2'-11 8" (905)* = 2'-11 to complete door assembly as shown. • Light-colored areas are parts included60with door. Dark-colored Jamb
• Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. Unitproduct Dimension Widthmethods or materials. Refer to product installation guides at andersenwindows.com. • Details are for illustration only and are not intended to represent installation 3 ⁄ 8" (10) 3 ⁄ 8" (10) • Dimensions in parentheses are in millimeters. Minimum Rough Opening Width *Dimensions indicate location of astragal centerline.
253
200 Series Hinged Patio Doors – Inswing
equal light and custom
HINGED PATIO DOORS – INSWING Clear Opening Details
Vertical Joining Detail – LVL
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8 Overall Door Dimension Width Sum of individual door widths plus 3 ⁄ 4" (19) for each join. Door at 90° Clear Opening Position
Door at Full Clear Opening Position
Overall Rough Opening Width Overall door width plus 3 ⁄ 4" (19).
Clear Opening Width Full Open Position
3 ⁄ 4"
(19)
Clear Opening Width 90°
Unit Dim. Width
Unit Dim. Width
3 ⁄ 4"
Stationary
Astragal
Horizontal Section Hinged Inswing to Hinged Inswing
Active
Horizontal Section Two-Panel, Stationary and Active (open)
(19)
For more joining information see the combination designs section starting on page 255. Door at 90° Clear Opening Position
Door at Full Clear Opening Position
Clear Opening Height
Clear Opening Width Full Open Position ClearOpenings Opening Width 90° Separate Rough Detail
Head
Scale 11 ⁄ 2" (38) = 1'-0" (305) — 1:8
To meet structural requirements or to achieve a wider joined appearance, doors may be installed into separate rough
1 1 ⁄ 2" (38)
openings having vertical support (by others) in combination
Sill
with Andersen® exterior filler and exterior vinyl trim.
Vertical Section 3 ⁄ 4"
Stationary
(19)
Astragal
2" (51)
Active Vertical Support by Others
Andersen® Filler and Vinyl Trim
Full Panel Operation
Unit Dim. Width 3 ⁄ 4"
Unit Dim. Width (19)
Unit Dim. Width Exterior trim and flashing by others
Unit Dim. Width 2" (51)
Horizontal Section Hinged Inswing and Hinged Inswing
Jamb-Hinged Patio Door in 2 x 6 Wall
• Light-colored areas are parts included with door. Dark-colored areas are additional Andersen® parts required to complete door assembly as shown. • Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages 288-289. • Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. • Andersen recommends installation of doors into separate rough openings. Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. • Dimensions in parentheses are in millimeters.
254
TECHNICAL DATA
Andersen速 windows and patio doors make it easy to create a wide variety of combination designs. Combination Types Ribbons
Determining Design Wind Load Performance
Ribbons are horizontal window combinations (vertical joins) where opposite ends
Proper combination design in conformance with local wind load requirements is
(head and sill) of individual windows are fastened to the building structure.
vital to the success of your project. To make sure a combination is safe and that it complies with local building codes, the combination design wind load performance
Stacks
capacity must be determined.
(both side jambs) of individual windows are fastened to the building structure.
Two basic configurations are used in combination designs:
Correctly determining this performance capacity involves the following three steps:
Combination Design, Product Performance, Installation & Warranty
Stacks are vertical window combinations (horizontal joins) where opposite sides
STEP 1
1-way configurations or 2-way configurations. Determine Building Code Requirement
1-Way
Make sure that you have the proper local codes and have identified specified compliance values. This calculated value (PSF) will be used to determine if the combination will be acceptable (STEP 3).
STEP 2 Ribbon Combination
Stack Combination
Determine Product Performance Compare product Design Pressure Rating data to the local building code (PSF) requirement. This will show whether the individual units in a combination design
2-Way
are acceptable.
STEP 3 Multiple Ribbon/Stack Combination
Determine Combination Performance
2-way combinations exist when multiple vertical stacks and horizontal ribbons
This step helps determine whether a given product, size, configuration and joining
are joined together. Unlike 1-way combinations, the adjacent sides (head and
material type will meet the local building code design wind load requirement.
sill, or both side jambs) of individual units are not necessarily fastened directly
To determine what joining material type to use (LVL, steel, aluminum or wood),
to the building structure. 2-way combinations are joined with both vertical and
compare the local building code design wind load requirement to the Design Wind
horizontal joining material and may require reinforced joining materials and
Load Table value for a particular joining material on the following pages.
brackets depending on the local building code requirement for design wind load (measured in pounds per square foot, PSF).
255
COMBINATION DESIGNS Andersen® Joining Materials and Installation Accessories For a successful installation, designed to provide the required
Materials vary depending on type of units being joined and wind load requirements.
design pressure, it is important that Andersen joining materials
Non-reinforced joining materials are used to create alignment and positive joining between windows.
and installation accessories be specified by a project architect
Joining materials are not connected to the rough opening structure. Non-reinforced joins can also
or contractor. Andersen offers several types of joining
be achieved using accessory items such as v-notch gusset plates. Please contact your Andersen
materials. Each creates a joining system that maintains the
supplier for specific performance and product recommendations.
look of Andersen® products. Choose the type appropriate for your combination design. The addition of joining materials will affect the overall rough opening dimension. Instruction guides are available at andersenwindows.com. Read and follow instruction guides
Series Frenchwood® 400 Series Frenchwood® 400 Series400 Frenchwood® SeriesDouble-Hung Tilt-Wash Double-Hung Series Double-Hung 400 Series Tilt-Wash Double 200 Series400 Double-Hung Series400 Tilt-Wash Series200 Double-Hung Hinged Hinged Patio200 Door Hinged Patio DoorPatio Door Series Casement 400 Series Casement 400 Series400 Casement Vinyl Joining Material Non-Reinforced Joining Vinyl Joining Vinyl Joining Material Joining Material Non-Reinforced Joining Non-Reinforced Joining MaterialJoining Aluminum Material Aluminum Aluminum Joining Material Wood Joining Material Wood Joining Material Wood Joining Material Material (LVL) Material (LVL) Material (LVL) Exterior Exterior Trim Strip Trim Strip
Exterior Exterior Trim Strip Trim Strip Exterior Trim Strip
Exterior Trim Strip
Exterior Exterior Trim Strip Trim Strip
Exterior Exterior Exterior Trim Strip Trim Strip Trim Strip
Exterior Trim Strip
in their entirety. Andersen Exterior Trim Strips - A variety of trim strips for finishing the join between joined products are available in colors to match Andersen windows and doors. Andersen Interior Wood Casing - Available in several wood types, pre-finished options, sizes and style options including laminated arch casings, decorative plinths and key blocks. Components used with each joining system will vary depending
Reinforced joining materials are used to create product alignment, positive joining and load
on products being joined. Check with your Andersen supplier
transfer between the Andersen windows and doors and the rough opening. They provide added
for more information.
strength capable of withstanding a variety of wind load pressures. The structural performance of any combination is only as high as the lowest structural performance rating of any individual window or joining material in the combination.
Laminated Veneer Lumber (LVL) Joining Material
Steel Joining Material
Exterior Exterior TrimTrim StripStrip
Exterior Trim Strip
ExteriorTrim TrimStrip Strip Exterior
Joining Material LVL Aluminum Joining Material
Steel Joining Material
Aluminum Joining Material LVL Joining Material
End Plate
End Bracket
LVL joining material is available for both windows and patio doors. Both 4
Aluminum Joining Material
9 ⁄ 16 "
(116) x
3 ⁄ 4"
(19) LVL
End Plate
Available in 8'-0 1 ⁄ 4" (2445), 9'-6" (2896)
Available in 6'-0 3 ⁄ 32" (1831) and 7'-8" (2337)
and 12'-6" (3810) lengths. Treated for
lengths. High-quality aluminum provides increased
and 6 9 ⁄ 16" (167) x 3 ⁄ 4" (19) LVL are available and
corrosion resistance, the 4" (102) width
stiffness and is anodized for corrosion resistance.
include an aluminum exterior trim retainer. LVL
material provides strength and rigidity. Adjacent
Aluminum joining stays within the basic jamb of the
materials are available in a variety of lengths up to
windows attach to the steel joining with screws
window so interior casing can be used without
10' (3048). Use with casement, awning, double-
provided in the kit. Use with casement, awning,
extension jambs. Adjacent windows attach to the
hung and select specialty windows and patio doors.
double-hung and select specialty windows.
aluminum joining with screws provided in the kit. Use with casement, awning and select specialty windows.
• Dimensions in parentheses are in millimeters. • Structural performance of any combination is only as high as the lowest structural performance of any individual unit or joining material in the combination.
256
Windows – Casement & Awning 1-Way Wood Joining
(A + B) ÷ 2 = 12'-6" (3810)
70
58
40
29
22
(A + B) ÷ 2 = 12'-0" (3658)
70
58
40
29
22
(A + B) ÷ 2 = 11'-6" (3505)
70
58
40
29
22
(A + B) ÷ 2 = 11'-0" (3353)
70
58
40
29
22
(A + B) ÷ 2 = 10'-6" (3200)
70
58
40
29
22
(A + B) ÷ 2 = 10'-0" (3048)
70
58
40
29
22
(A + B) ÷ 2 = 9'-6" (2896)
70
58
40
29
22
(A + B) ÷ 2 = 9'-0" (2743)
70
58
40
29
22
(A + B) ÷ 2 = 8'-6" (2591)
70
58
40
29
22
(A + B) ÷ 2 = 8'-0" (2438)
70
58
40
29
22
(A + B) ÷ 2 = 7'-6" (2286)
70
58
40
29
22
(A + B) ÷ 2 = 7'-0" (2134)
70
58
40
29
22
(A + B) ÷ 2 = 6'-6" (1981)
70
58
40
29
22
(A + B) ÷ 2 = 6'-0" (1829)
70
58
40
29
22
(A + B) ÷ 2 = 5'-6" (1676)
70
58
40
29
22
(A + B) ÷ 2 = 5'-0" (1524)
70
58
40
29
22
(A + B) ÷ 2 = 4'-6" (1372)
70
58
40
30
23
(A + B) ÷ 2 = 4'-0" (1219)
70
58
41
31
24
20
(A + B) ÷ 2 = 3'-6" (1067)
70
59
43
33
27
22
(A + B) ÷ 2 = 3'-0" (914)
70
63
47
37
30
25
21
(A + B) ÷ 2 = 2'-6" (762)
70
70
54
43
35
29
24
21
(A + B) ÷ 2 = 2'-0" (610)
70
70
65
52
42
35
30
26
(A + B) ÷ 2 = 1'-6" (457)
70
70
70
68
56
46
39
34
29
26
C = (length of join)
3'-6"
4'-0"
4'-6"
5'-0"
5'-6"
6'-0"
6'-6"
7'-0"
7'-6"
8'-0"
(1067)
(1219)
(1372)
(1524)
(1676)
(1829)
(1981)
(2134)
(2286)
(2438)
PSF
A
B
A B
C
C
Wood Joining Material
Combination Design, Product Performance, Installation & Warranty
Average Adjacent Window Dimension
400 Series: Casement, Awning, Complementary Specialty, Flexiframe® Windows
Note: Stacking of windows is allowed to a maximum height of 12'-6" (3810). Contact your Andersen supplier for information about taller combination heights.
22
1-Way Wood Joining
400 Series: Casement, Awning, Complementary Specialty Windows (A + B) ÷ 2 = 12'-6" (3810)
70
70
58
42
32
24
20
(A + B) ÷ 2 = 12'-0" (3658)
70
70
58
42 32 Exterior Trim Strip
24
20
Exterior Trim Strip
Average Adjacent Window Dimension
e-Hung
TECHNICAL DATA
A
(A + B) ÷ 2 = 11'-6" (3505)
70
70
58
24
20
(AJoining + B) ÷Material 2 = 11'-0" (3353) Steel
70
70
58
42 32 LVL Joining Material
24
20
(A + B) ÷ 2 = 10'-6" (3200)
70
70
58
42
32
24
20
End (A + B) ÷ Bracket 2 = 10'-0" (3048)
70
70
58
42
32
24
20
(A + B) ÷ 2 = 9'-6" (2896)
70
70
58
42
32
24
20
(A + B) ÷ 2 = 9'-0" (2743)
70
70
58
42
32
24
20
(A + B) ÷ 2 = 8'-6" (2591)
70
70
58
42
32
24
20
(A + B) ÷ 2 = 8'-0" (2438)
70
70
58
42
32
24
20
(A + B) ÷ 2 = 7'-6" (2286)
70
70
58
42
32
24
20
(A + B) ÷ 2 = 7'-0" (2134)
70
70
58
42
32
24
20
(A + B) ÷ 2 = 6'-6" (1981)
70
70
58
42
32
24
20
(A + B) ÷ 2 = 6'-0" (1829)
70
70
58
42
32
24
20
(A + B) ÷ 2 = 5'-6" (1676)
70
70
58
42
32
25
20
(A + B) ÷ 2 = 5'-0" (1524)
70
70
58
42
32
25
21
(A + B) ÷ 2 = 4'-6" (1372)
70
70
58
43
33
27
22
(A + B) ÷ 2 = 4'-0" (1219)
70
70
59
45
35
29
24
20
(A + B) ÷ 2 = 3'-6" (1067)
70
70
63
48
38
31
26
22
(A + B) ÷ 2 = 3'-0" (914)
70
70
68
54
43
36
30
25
22
(A + B) ÷ 2 = 2'-6" (762)
70
70
70
62
50
42
35
30
26
22
(A + B) ÷ 2 = 2'-0" (610)
70
70
70
70
61
51
43
37
32
27
(A + B) ÷ 2 = 1'-6" (457)
70
70
70
70
70
67
57
49
42
35
C = (length of join)
42
32
PSF
B
A B
C
C
Wood Joining Material
Note: Stacking of windows is allowed to a maximum height of 12'-6" (3810). Contact your Andersen supplier for information about taller combination heights.
3'-6"
4'-0"
4'-6"
5'-0"
5'-6"
6'-0"
6'-6"
7'-0"
7'-6"
8'-0"
(1067)
(1219)
(1372)
(1524)
(1676)
(1829)
(1981)
(2134)
(2286)
(2438)
• Numerical values in charts represent structural pressure only. • Dimensions in parentheses are in millimeters. • Structural performance of any combination is only as high as the lowest structural performance of any individual unit or joining material in the combination. • Andersen® products must be installed and anchored properly according to joining and installation guides to meet rated structural performance. Refer to product joining and installation guides at andersenwindows.com. • Additional windload tables are available at andersenwindows.com.
257
COMBINATION DESIGNS Windows – Casement & Awning 2-Way Wood Joining
Average Adjacent Window Dimension
400 Series: Casement, Awning, Complementary Specialty, Flexiframe® Windows (A + B) ÷ 2 = 8'-6" (2591)
20
(A + B) ÷ 2 = 8'-0" (2438)
21
A
(A + B) ÷ 2 = 7'-6" (2286)
23
B
(A + B) ÷ 2 = 7'-0" (2134)
24
(A + B) ÷ 2 = 6'-6" (1981)
26
20
(A + B) ÷ 2 = 6'-0" (1829)
28
22
(A + B) ÷ 2 = 5'-6" (1676)
31
24
(A + B) ÷ 2 = 5'-0" (1524)
34
26
(A + B) ÷ 2 = 4'-6" (1372)
38
(A + B) ÷ 2 = 4'-0" (1219)
43
(A + B) ÷ 2 = 3'-6" (1067)
49
(A + B) ÷ 2 = 3'-0" (914)
57
(A + B) ÷ 2 = 2'-6" (762)
69
(A + B) ÷ 2 = 2'-0" (610)
70
(A + B) ÷ 2 = 1'-6" (457)
C = (length of join)
C
C
A
B
20
PSF 29
23
33
26
21
37
29
24
44
34
28
23
52
41
33
27
23
66
52
42
34
29
70
70
69
56
46
39
31
24
20
3'-6"
4'-0"
4'-6"
5'-0"
5'-6"
6'-0"
6'-6"
7'-0"
7'-6"
(1067)
(1219)
(1372)
(1524)
(1676)
(1829)
(1981)
(2134)
(2286)
Wood Joining Material
23
1-Way or 2-Way Aluminum Joining
400 Series: Casement, Awning, Complementary Specialty, Flexiframe® Windows (A + B) ÷ 2 = 9'-0" (2743) (A + B) ÷ 2 = 8'-0" (2438)
70 70 70
56 60 63
41 43 46
31 32 34
23 25 26
21
(A + B) ÷ 2 = 7'-6" (2286)
70
67
49
36
28
22
(A + B) ÷ 2 = 7'-0" (2134)
70
70
52
39
30
23
(A + B) ÷ 2 = 6'-6" (1981)
70
70
56
42
32
25
20
(A + B) ÷ 2 = 6'-0" (1829)
70
70
60
45
35
27
21
(A + B) ÷ 2 = 5'-6" (1676)
70
70
66
49
38
29
23
(A + B) ÷ 2 = 5'-0" (1524)
70
70
70
54
41
32
26
21
(A + B) ÷ 2 = 4'-6" (1372)
70
70
70
59
45
35
28
23
(A + B) ÷ 2 = 4'-0" (1219)
70
70
70
66
50
39
31
25
(A + B) ÷ 2 = 3'-6" (1067)
70
70
70
70
57
44
35
28
(A + B) ÷ 2 = 3'-0" (914)
70
70
70
70
65
51
40
33
(A + B) ÷ 2 = 2'-6" (762)
70
70
70
70
70
60
48
39
(A + B) ÷ 2 = 2'-0" (610)
70
70
70
70
70
70
59
48
(A + B) ÷ 2 = 1'-6" (457)
70
70
70
70
70
70
70
63
C = (length of join)
4'-0"
4'-6"
5'-0"
5'-6"
6'-0"
6'-6"
7'-0"
7'-6"
(1219)
(1372)
(1524)
(1676)
(1829)
(1981)
(2134)
(2286)
Average Adjacent Window Dimension
(A + B) ÷ 2 = 8'-6" (2591)
PSF
For a join with a continuous jamb on one side, multiply PSF by 1.2.
A C
B
C
A
B
Aluminum Joining Material E = 10 x 106 psi, l (AXIS x - x) = .59 in4 6061-T6 Aluminum X
X
End Plate
For a join with a continuous jamb on both sides, multiply PSF by 1.4.
• Numerical values in charts represent structural pressure only. • Dimensions in parentheses are in millimeters. • Structural performance of any combination is only as high as the lowest structural performance of any individual unit or joining material in the combination. • Andersen® products must be installed and anchored properly according to joining and installation guides to meet rated structural performance. Refer to product joining and installation guides at andersenwindows.com. • Additional windload tables are available at andersenwindows.com.
258
TECHNICAL DATA
Windows – Casement & Awning 1-Way or 2-Way Steel Joining (A + B) ÷ 2 = 12'-6" (3810)
50
37
28
22
(A + B) ÷ 2 = 12'-0" (3658)
52
38
29
23
(A + B) ÷ 2 = 11'-6" (3505)
54
40
30
24
(A + B) ÷ 2 = 11'-0" (3353)
57
42
32
25
20
(A + B) ÷ 2 = 10'-6" (3200)
59
44
33
26
21
(A + B) ÷ 2 = 10'-0" (3048)
62
46
35
28
22
(A + B) ÷ 2 = 9'-6" (2896)
66
48
37
29
24
(A + B) ÷ 2 = 9'-0" (2743)
69
51
39
31
25
21
(A + B) ÷ 2 = 8'-6" (2591)
70
54
41
33
26
22
(A + B) ÷ 2 = 8'-0" (2438)
70
57
44
35
28
23
(A + B) ÷ 2 = 7'-6" (2286)
70
61
47
37
30
25
21
(A + B) ÷ 2 = 7'-0" (2134)
70
66
50
40
32
26
22
(A + B) ÷ 2 = 6'-6" (1981)
70
70
54
43
34
28
24
20
(A + B) ÷ 2 = 6'-0" (1829)
70
70
58
46
37
31
26
22
(A + B) ÷ 2 = 5'-6" (1676)
70
70
64
50
41
34
28
24
21
(A + B) ÷ 2 = 5'-0" (1524)
70
70
70
55
45
37
31
27
23
20
(A + B) ÷ 2 = 4'-6" (1372)
70
70
70
62
50
41
35
30
26
22
(A + B) ÷ 2 = 4'-0" (1219)
70
70
70
69
56
46
39
33
29
25
22
(A + B) ÷ 2 = 3'-6" (1067)
70
70
70
70
64
53
45
38
33
28
25
22
(A + B) ÷ 2 = 3'-0" (914)
70
70
70
70
70
62
52
44
38
33
29
26
23
21
(A + B) ÷ 2 = 2'-6" (762)
70
70
70
70
70
70
62
53
46
40
35
31
28
25
22
(A + B) ÷ 2 = 2'-0" (610)
70
70
70
70
70
70
66
57
50
44
39
35
31
28
26
23
21
(A + B) ÷ 2 = 1'-6" (457)
70
70
70
70
70
70 70
70
70
70
66
58
52
46
42
37
34
31
28
C = (length of join)
A C
B
C
PSF
A
B
4" (102) x 3/16" (5) Steel Joining Material E = 29 x 106 psi, l (AXIS x - x) = 1.0 in4 A36 hot rolled steel X
X
Combination Design, Product Performance, Installation & Warranty
Average Adjacent Window Dimension
400 Series: Casement, Awning, Complementary Specialty, Flexiframe® Windows
End Bracket
20 25
24
3'-0" 3'-6" 4'-0" 4'-6" 5'-0" 5'-6" 6'-0" 6'-6" 7'-0" 7'-6" 8'-0" 8'-6" 9'-0" 9'-6" 10'-0" 10'-6" 11'-0" 11'-6" 12'-0" 12'-6" (914) (1067) (1219) (1372) (1524) (1676) (1829) (1981) (2134) (2286) (2438) (2591) (2743) (2896) (3048) (3200) (3353) (3505) (3658) (3810)
For a join with a continuous jamb on one side, multiply PSF by 1.2.
For a join with a continuous jamb on both sides, multiply PSF by 1.4.
• Numerical values in charts represent structural pressure only. • Dimensions in parentheses are in millimeters. • Structural performance of any combination is only as high as the lowest structural performance of any individual unit or joining material in the combination. • Andersen® products must be installed and anchored properly according to joining and installation guides to meet rated structural performance. Refer to product joining and installation guides at andersenwindows.com. • Additional windload tables are available at andersenwindows.com.
259
COMBINATION DESIGNS Windows – Casement & Awning 1-Way LVL Joining
4 9/16" (116) LVL
Average Adjacent Window Dim.
400 Series: Casement, Awning, Complementary Specialty, Flexiframe® Windows (A + B) ÷ 2 = 6'-0" (1829)
70
70
56
45
(A + B) ÷ 2 = 5'-6" (1676)
70
70
61
50
(A + B) ÷ 2 = 5'-0" (1524)
70
70
68
55
45
36
(A + B) ÷ 2 = 4'-6" (1372)
70
70
70
61
51
43
37
(A + B) ÷ 2 = 4'-0" (1219)
70
70
70
70
58
49
42
35
(A + B) ÷ 2 = 3'-6" (1067)
70
70
70
70
68
56
49
39
(A + B) ÷ 2 = 3'-0" (914)
70
70
70
70
70
63
53
45
(A + B) ÷ 2 = 2'-6" (762)
70
70
70
70
70
70
62
53
(A + B) ÷ 2 = 2'-0" (610)
70
70
70
70
70
70
62
53
(A + B) ÷ 2 = 1'-6" (457)
70
70
70
70
70
70
62
53
C = (length of join)
PSF
A B
3'-6"
4'-0"
4'-6"
5'-0"
5'-6"
6'-0"
6'-6"
7'-0"
(1067)
(1219)
(1372)
(1524)
(1676)
(1829)
(1981)
(2134)
C
C
4 9/16" (116) x 3/4" (19) LVL Joining Material
2-Way LVL Joining
A
Average Adjacent Window Dim.
400 Series: Casement, Awning, Complementary Specialty, Flexiframe® Windows
4 9/16" (116) LVL
(A + B) ÷ 2 = 6'-0" (1829)
65
65
51
41
(A + B) ÷ 2 = 5'-6" (1676)
70
70
56
45
(A + B) ÷ 2 = 5'-0" (1524)
70
70
62
50
41
34
(A + B) ÷ 2 = 4'-6" (1372)
70
70
68
55
46
38
33
(A + B) ÷ 2 = 4'-0" (1219)
70
70
70
62
51
43
37
32
(A + B) ÷ 2 = 3'-6" (1067)
70
70
70
70
59
49
42
36
(A + B) ÷ 2 = 3'-0" (914)
70
70
70
70
69
58
49
42
(A + B) ÷ 2 = 2'-6" (762)
70
70
70
70
70
69
59
51
(A + B) ÷ 2 = 2'-0" (610)
70
70
70
70
61
69
59
51
(A + B) ÷ 2 = 1'-6" (457)
70
70
70
70
61
69
59
51
C = (length of join)
C
PSF
3'-6"
4'-0"
4'-6"
5'-0"
5'-6"
6'-0"
6'-6"
7'-0"
(1067)
(1219)
(1372)
(1524)
(1676)
(1829)
(1981)
(2134)
A
LVL Joining Material
82
75
63
56
48
44
37
31
24
(A + B) ÷ 2 = 9'-6" (2896)
82
75
63
56
48
44
37
31
24
(A + B) ÷ 2 = 9'-0" (2743)
82
75
63
56
48
44
37
31
24
LVL
(A + B) ÷ 2 = 8'-6" (2591)
82
75
63
56
48
44
37
31
25
(A + B) ÷ 2 = 8'-0" (2438)
82
75
63
56
48
44
37
31
25
(A + B) ÷ 2 = 7'-6" (2286)
82
75
63
56
48
44
38
32
A 26B
(A + B) ÷ 2 = 7'-0" (2134)
82
75
63
56
49
45
39
33
26
(A + B) ÷ 2 = 6'-6" (1981)
82
75
63
57
50
46
40
34
28
(A + B) ÷ 2 = 6'-0" (1829)
82
75
64
58
51
47
41
35
29
(A + B) ÷ 2 = 5'-6" (1676)
82
77
66
60
54
50
44
37
30
(A + B) ÷ 2 = 5'-0" (1524)
82
79
68
63
56
52
46
39
32
(A + B) ÷ 2 = 4'-6" (1372)
82
82
73
67
60
56
50
43
35
(A + B) ÷ 2 = 4'-0" (1219)
82
82
77
71
64
60
53
46
38
(A + B) ÷ 2 = 3'-6" (1067)
82
82
82
79
71
67
60
52
42
(A + B) ÷ 2 = 3'-0" (914)
82
82
82
82
78
74
66
57
47
(A + B) ÷ 2 = 2'-6" (762)
82
82
82
82
82
82
78
68
56
(A + B) ÷ 2 = 2'-0" (610)
82
82
82
82
82
82
82
79
66
Average Adjacent Window Dimension
C = (length of join)
260
PSF
B
4 9/16" (116) x 3/4" (19)
(A + B) ÷ 2 = 10'-0" (3048)
(A + B) ÷ 2 = 1'-6" (457)
B
C
6 /16" (167) 9
B
A
82
82
82
82
82
82
82
82
82
6'-0"
6'-6"
7'-0"
7'-6"
8'-0"
8'-6"
9'-0"
9'-6"
10'-0"
(1829) or less
(1981)
(2134)
(2286)
(2438)
(2591)
(2743)
(2896)
(3048)
C
C
A
B
6 9/16" (167) x 3/4" (19) LVL Joining Material Note: 2-way joining must be assembled on the jobsite within the rough opening.
• Numerical values in charts represent structural pressure only. • Dimensions in parentheses are in millimeters. • Structural performance of any combination is only as high as the lowest structural performance of any individual unit or joining material in the combination. • Andersen® products must be installed and anchored properly according to joining and installation guides to meet rated structural performance. Refer to product joining and installation guides at andersenwindows.com. • Additional windload tables are available at andersenwindows.com.
TECHNICAL DATA
Windows – 400 Series Double-Hung Insert 1-Way LVL Joining
(A + B) ÷ 2 = 6'-0" (1829)
82
70
62
50
40
32
(A + B) ÷ 2 = 5'-6" (1676)
82
71
63
51
42
33
(A + B) ÷ 2 = 5'-0" (1524)
82
72
64
53
43
35
(A + B) ÷ 2 = 4'-6" (1372)
82
75
68
56
46
38
(A + B) ÷ 2 = 4'-0" (1219)
82
79
71
59
49
39
(A + B) ÷ 2 = 3'-6" (1067)
82
82
78
65
54
44
(A + B) ÷ 2 = 3'-0" (914)
82
82
82
72
59
48
(A + B) ÷ 2 = 2'-6" (762)
82
82
82
82
70
57
(A + B) ÷ 2 = 2'-0" (610)
82
82
82
82
81
66
(A + B) ÷ 2 = 1'-6" (457)
82
82
82
82
82
82
(A + B) ÷ 2 = 1'-0" (305)
82
82
82
82
82
82
5'-6"
6'-0"
6'-6"
7'-0"
7'-6"
8'-0"
(1676) or less
(1829)
(1981)
(2134)
(2286)
(2438)
C = (length of join)
PSF
A
B A
C
B C
Combination Design, Product Performance, Installation & Warranty
4 /16" (116) LVL 9
Average Adjacent Window Dimension
400 Series: Woodwright® Double-Hung, Picture and Transom Insert Windows, Tilt-Wash Double-Hung, Picture and Transom Insert Windows, Flexiframe® Windows
4 9/16" (116) x 3/4" (19) LVL Joining Material
2-Way LVL Joining
400 Series: Woodwright® Double-Hung, Picture and Transom Insert Windows, Tilt-Wash Double-Hung, Picture and Transom Insert Windows, Flexiframe® Windows (A + B) ÷ 2 = 10'-0" (3048)
82
75
63
56
48
44
37
31
24
(A + B) ÷ 2 = 9'-6" (2896)
82
75
63
56
48
44
37
31
24
(167)
(A + B) ÷ 2 = 9'-0" (2743)
82
75
63
56
48
44
37
31
24
LVL
(A + B) ÷ 2 = 8'-6" (2591)
82
75
63
56
48
44
37
31
25
(A + B) ÷ 2 = 8'-0" (2438)
82
75
63
56
48
44
37
31
25
(A + B) ÷ 2 = 7'-6" (2286)
82
75
63
56
48
44
38
32
26
(A + B) ÷ 2 = 7'-0" (2134)
82
75
63
56
49
45
39
33
26
(A + B) ÷ 2 = 6'-6" (1981)
82
75
63
57
50
46
40
34
28
(A + B) ÷ 2 = 6'-0" (1829)
82
75
64
58
51
47
41
35
29
(A + B) ÷ 2 = 5'-6" (1676)
82
77
66
60
54
50
44
37
30
(A + B) ÷ 2 = 5'-0" (1524)
82
79
68
63
56
52
46
39
32
(A + B) ÷ 2 = 4'-6" (1372)
82
82
73
67
60
56
50
43
35
(A + B) ÷ 2 = 4'-0" (1219)
82
82
77
71
64
60
53
46
38
(A + B) ÷ 2 = 3'-6" (1067)
82
82
82
79
71
67
60
52
42
(A + B) ÷ 2 = 3'-0" (914)
82
82
82
82
78
74
66
57
47
(A + B) ÷ 2 = 2'-6" (762)
82
82
82
82
82
82
78
68
56
(A + B) ÷ 2 = 2'-0" (610)
82
82
82
82
82
82
82
79
66
(A + B) ÷ 2 = 1'-6" (457)
82
82
82
82
82
82
82
82
82
6'-0"
6'-6"
7'-0"
7'-6"
8'-0"
8'-6"
9'-0"
9'-6"
10'-0"
(1829) or less
(1981)
(2134)
(2286)
(2438)
(2591)
(2743)
(2896)
(3048)
Average Adjacent Window Dimension
6 9/16"
C = (length of join)
PSF
A
B
C
6 9/16" (167) x 3/4" (19) LVL Joining Material
Note: 2-way joining must be assembled on the jobsite within the rough opening. When creating 2-way combinations for 6 9/16" (167) minimum wall thickness, 6 9/16" (167) LVL joining material is required.
• Numerical values in charts represent structural pressure only. • Dimensions in parentheses are in millimeters. • Structural performance of any combination is only as high as the lowest structural performance of any individual unit or joining material in the combination. • Andersen® products must be installed and anchored properly according to joining and installation guides to meet rated structural performance. Refer to product joining and installation guides at andersenwindows.com. • Additional windload tables are available at andersenwindows.com.
261
COMBINATION DESIGNS Windows – 400 Series Double-Hung Insert 1-Way Joining with Installation Brackets
Average Adjacent Window Dimension
400 Series: Woodwright® Double-Hung, Picture and Transom Insert Windows, Tilt-Wash Double-Hung, Picture and Transom Insert Windows (A + B) ÷ 2 = 12'-0" (3658)
50
34
24
18
(A + B) ÷ 2 = 11'-0" (3353)
50
34
24
18
(A + B) ÷ 2 = 10'-0" (3048)
50
34
24
18
(A + B) ÷ 2 = 9'-0" (2743)
50
34
24
18
(A + B) ÷ 2 = 8'-0" (2438)
50
34
25
19
15
(A + B) ÷ 2 = 7'-0" (2134)
50
35
26
20
16
(A + B) ÷ 2 = 6'-0" (1829)
50
38
28
22
18
15
(A + B) ÷ 2 = 5'-0" (1524)
50
42
32
26
21
17
(A + B) ÷ 2 = 4'-0" (1219)
50
50
39
31
25
21
17
(A + B) ÷ 2 = 3'-0" (914)
50
50
50
40
33
28
23
18
15
(A + B) ÷ 2 = 2'-0" (610)
50
50
50
50
49
41
34
27
22
used at the ends of each join
3'-6"
4'-0"
4'-6"
5'-0"
5'-6"
6'-0"
6'-6"
7'-0"
7'-6"
(1067) or less
(1219)
(1372)
(1524)
(1676)
(1829)
(1981)
(2134)
(2286)
to attach units to the opening.
C = (length of join)
A
B
B A
C
PSF
C Note: Only 1-way combinations similar to those shown above are allowed.
Installation brackets should be
Windows – 400 Series Double-Hung Full-Frame 1-Way Joining
Average Adjacent Window Dimension
400 Series: Woodwright® Double-Hung, Picture and Transom Full-Frame Windows, Tilt-Wash Double-Hung, Picture and Transom Full-Frame Windows (A + B) ÷ 2 = 12'-6" (3810)
50
42
33
28
23
20
(A + B) ÷ 2 = 12'-0" (3658)
50
42
33
28
23
20
(A + B) ÷ 2 = 11'-6" (3505)
50
42
33
28
23
20
(A + B) ÷ 2 = 11'-0" (3353)
50
42
33
28
23
20
(A + B) ÷ 2 = 10'-6" (3200)
50
42
33
28
23
20
(A + B) ÷ 2 = 10'-0" (3048)
50
42
33
28
23
20
(A + B) ÷ 2 = 9'-6" (2896)
50
42
33
28
23
20
(A + B) ÷ 2 = 9'-0" (2743)
50
42
33
28
23
20
(A + B) ÷ 2 = 8'-6" (2591)
50
42
33
28
23
20
(A + B) ÷ 2 = 8'-0" (2438)
50
42
33
28
23
20
(A + B) ÷ 2 = 7'-6" (2286)
50
42
33
28
23
20
(A + B) ÷ 2 = 7'-0" (2134)
50
42
33
28
23
20
(A + B) ÷ 2 = 6'-6" (1981)
50
42
33
28
23
20
(A + B) ÷ 2 = 6'-0" (1829)
50
42
33
28
23
20
(A + B) ÷ 2 = 5'-6" (1676)
50
42
33
28
23
21
(A + B) ÷ 2 = 5'-0" (1524)
50
(A + B) ÷ 2 = 4'-6" (1372)
50
(A + B) ÷ 2 = 4'-0" (1219)
50
(A + B) ÷ 2 = 3'-6" (1067)
50
(A + B) ÷ 2 = 3'-0" (914)
50
(A + B) ÷ 2 = 2'-6" (762)
50
(A + B) ÷ 2 = 2'-0" (610)
50
(A + B) ÷ 2 = 1'-6" (457)
50
C = (length of join)
PSF
A
B A
C
B C Note: Only 1-way combinations similar to those shown above are allowed.
42
33
28
24
21
42
33
29
25
22
20
42
34
30
26
23
21
44
37
32
28
26
23
21
47
39
35
30
28
25
23
21
20
50
44
40
35
32
29
27
25
24
22
21
50
50
46
41
37
34
32
29
27
25
24
23
22
20
20
50
50
50
50
49
45
42
39
37
34
32
30
29
27
26
25
4'-0" 4'-6" 5'-0" 5'-6" 6'-0" 6'-6" 7'-0" 7'-6" 8'-0" 8'-6" 9'-0" 9'-6" 10'-0" 10'-6" 11'-0" 11'-6" 12'-0" 12'-6" (1219) (1372) (1524) (1676) (1829) (1981) (2134) (2286) (2438) (2591) (2743) (2896) (3048) (3200) (3353) (3505) (3658) (3810) or less
• Numerical values in charts represent structural pressure only. • Dimensions in parentheses are in millimeters. • Structural performance of any combination is only as high as the lowest structural performance of any individual unit or joining material in the combination. • Andersen® products must be installed and anchored properly according to joining and installation guides to meet rated structural performance. Refer to product joining and installation guides at andersenwindows.com. • Additional windload tables are available at andersenwindows.com.
262
24
TECHNICAL DATA
Windows – 400 Series Double-Hung Full-Frame 1-Way Joining with V-Notch Gusset Plates
(A + B) ÷ 2 = 12'-6" (3810)
50
48
41
33
29
24
22
(A + B) ÷ 2 = 12'-0" (3658)
50
48
41
33
29
24
22
(A + B) ÷ 2 = 11'-6" (3505)
50
48
41
33
29
24
22
(A + B) ÷ 2 = 11'-0" (3353)
50
48
41
33
29
24
22
(A + B) ÷ 2 = 10'-6" (3200)
50
48
41
33
29
24
22
(A + B) ÷ 2 = 10'-0" (3048)
50
48
41
33
29
24
22
(A + B) ÷ 2 = 9'-6" (2896)
50
48
41
33
29
24
22
(A + B) ÷ 2 = 9'-0" (2743)
50
48
41
33
29
24
22
(A + B) ÷ 2 = 8'-6" (2591)
50
48
41
33
29
24
22
(A + B) ÷ 2 = 8'-0" (2438)
50
48
41
33
29
24
22
(A + B) ÷ 2 = 7'-6" (2286)
50
48
41
33
29
24
22
(A + B) ÷ 2 = 7'-0" (2134)
50
48
41
33
29
24
22
(A + B) ÷ 2 = 6'-6" (1981)
50
48
41
33
29
25
22
(A + B) ÷ 2 = 6'-0" (1829)
50
48
41
33
29
25
23
20
(A + B) ÷ 2 = 5'-6" (1676)
50
48
41
33
30
26
24
21
(A + B) ÷ 2 = 5'-0" (1524)
50
48
41
34
31
27
24
22
20
(A + B) ÷ 2 = 4'-6" (1372)
50
48
42
36
32
28
26
23
22
(A + B) ÷ 2 = 4'-0" (1219)
50
49
43
37
34
30
28
25
23
21
(A + B) ÷ 2 = 3'-6" (1067)
50
50
47
40
37
33
31
28
26
24
23
20
(A + B) ÷ 2 = 3'-0" (914)
50
50
50
44
40
36
33
30
29
26
25
22
20
(A + B) ÷ 2 = 2'-6" (762)
50
50
50
50
47
42
39
36
34
31
30
26
24
21
20
(A + B) ÷ 2 = 2'-0" (610)
50
50
50
50
50
49
46
42
40
37
35
31
31
27
25
22
(A + B) ÷ 2 = 1'-6" (457)
50
50
50
50
50
50
50
50
50
49
47
44
41
37
34
30
4'-6"
5'-0"
5'-6"
6'-0"
6'-6"
7'-0"
7'-6"
8'-0"
8'-6"
9'-0"
C = (length of join)
PSF
A
A
C Note: Only 1-way combinations similar to those shown above are allowed.
V-Notch Gusset Plate
26
9'-6" 10'-0" 10'-6" 11'-0" 11'-6" 12'-0" 12'-6"
(1372) (1524) (1676) (1829) (1981) (2134) (2286) (2438) (2591) (2743) (2896) (3048) (3200) (3353) (3505) (3658) (3810) or less A
400 Series: Woodwright® Double-Hung, Picture and Transom Full-Frame Windows, Tilt-Wash Double-Hung, Picture and Transom Full-Frame Windows
Average Adjacent Window Dimension
B
C
1-Way or 2-Way Steel Joining with V-Notch Gusset Plates
B
B B A
C
(A + B) ÷ 2 = 7'-6" (2286)
50
40
35
30
27
23
21
(A + B) ÷ 2 = 7'-0" (2134)
50
40
35
30
27
23
21
(A + B) ÷ 2 = 6'-6" (1981)
50
40
35
30
27
24
22
20
(A + B) ÷ 2 = 6'-0" (1829)
50
40
36
30
28
24
23
20
(A + B) ÷ 2 = 5'-6" (1676)
50
41
36
31
29
26
24
21
20
(A + B) ÷ 2 = 5'-0" (1524)
50
(A + B) ÷ 2 = 4'-6" (1372)
50
(A + B) ÷ 2 = 4'-0" (1219)
50
(A + B) ÷ 2 = 3'-6" (1067)
50
(A + B) ÷ 2 = 3'-0" (914)
50
(A + B) ÷ 2 = 2'-6" (762)
50
PSF
(A + B) ÷ 2 = 2'-0" (610)
50
C = (length of join)
B
Combination Design, Product Performance, Installation & Warranty
Average Adjacent Window Dimension
400 Series: Woodwright® Double-Hung, Picture and Transom Full-Frame Windows, Tilt-Wash Double-Hung, Picture and Transom Full-Frame Windows
C A
C
A
B
C
4" (102) x 3/16" (5) Steel Joining Material E = 29 x 106 psi, l (AXIS x - x) = 1.0 in4 A36 hot rolled steel X
X
42
37
32
30
27
25
22
21
43
39
34
32
28
27
24
23
21
45
41
36
34
30
28
26
25
22
21
50
45
40
37
34
32
29
28
26
24
20
50
50
44
41
37
35
32
30
28
26
22
50
50
50
48
44
41
38
36
34
31
26
23
50
50
50
50
50
48
44
41
38
36
34
30
V-Notch Gusset Plate
24
21
5'-6"
6'-0"
6'-6"
7'-0"
7'-6"
8'-0"
8'-6"
9'-0"
9'-6"
10'-0" 10'-6" 11'-0" 11'-6" 12'-0" 12'-6"
(1676) or less
(1829)
(1981)
(2134)
(2286)
(2438)
(2591)
(2743)
(2896)
(3048)
(3200)
(3353)
(3505)
(3658)
(3810)
• Numerical values in charts represent structural pressure only. • Dimensions in parentheses are in millimeters. • Structural performance of any combination is only as high as the lowest structural performance of any individual unit or joining material in the combination. • Andersen® products must be installed and anchored properly according to joining and installation guides to meet rated structural performance. Refer to product joining and installation guides at andersenwindows.com. • Additional windload tables are available at andersenwindows.com.
263
COMBINATION DESIGNS Windows – 200 Series Double-Hung 1-Way Joining with V-Notch Gusset Plates
Average Adjacent Window Dimension
200 Series: Tilt-Wash Double-Hung, Picture, Transom and Half Circle Windows (A + B) ÷ 2 = 12'-6" (3810)
50
50
48
35
26
20
(A + B) ÷ 2 = 12'-0" (3658)
50
50
48
35
26
20
(A + B) ÷ 2 = 11'-6" (3505)
50
50
48
35
26
20
(A + B) ÷ 2 = 11'-0" (3353)
50
50
48
35
26
20
(A + B) ÷ 2 = 10'-6" (3200)
50
50
48
35
26
20
(A + B) ÷ 2 = 10'-0" (3048)
50
50
48
35
26
20
(A + B) ÷ 2 = 9'-6" (2896)
50
50
48
35
26
20
(A + B) ÷ 2 = 9'-0" (2743)
50
50
48
35
26
20
(A + B) ÷ 2 = 8'-6" (2591)
50
50
48
35
26
20
(A + B) ÷ 2 = 8'-0" (2438)
50
50
48
35
26
20
(A + B) ÷ 2 = 7'-6" (2286)
50
50
48
35
26
20
(A + B) ÷ 2 = 7'-0" (2134)
50
50
48
35
26
20
(A + B) ÷ 2 = 6'-6" (1981)
50
50
48
35
26
20
(A + B) ÷ 2 = 6'-0" (1829)
50
50
48
35
26
20
(A + B) ÷ 2 = 5'-6" (1676)
50
50
48
35
26
20
(A + B) ÷ 2 = 5'-0" (1524)
50
50
48
35
26
21
(A + B) ÷ 2 = 4'-6" (1372)
50
50
48
35
27
22
(A + B) ÷ 2 = 4'-0" (1219)
50
50
49
37
29
24
20
(A + B) ÷ 2 = 3'-6" (1067)
50
50
50
40
32
26
22
(A + B) ÷ 2 = 3'-0" (914)
50
50
50
44
36
29
25
21
(A + B) ÷ 2 = 2'-6" (762)
50
50
50
50
41
34
29
25
21
(A + B) ÷ 2 = 2'-0" (610)
50
50
50
50
50
42
36
30
26
(A + B) ÷ 2 = 1'-6" (457)
50
50
50
50
66
55
47
40
35
31
C = (length of join)
3'-6"
4'-0"
4'-6"
5'-0"
5'-6"
6'-0"
6'-6"
7'-0"
7'-6"
8'-0"
(1067)
(1219)
(1372)
(1524)
(1676)
(1829)
(1981)
(2134)
(2286)
(2438)
PSF
A A
B
B C
C
Andersen® 200 Series V-Notch Gusset Plate
23
1-Way Joining with V-Notch Gusset Plates
Average Adjacent Window Dimension
200 Series: Tilt-Wash Double-Hung, Picture and Transom Windows (A + B) ÷ 2 = 12'-6" (3810)
50
50
50
41
31
24
(A + B) ÷ 2 = 12'-0" (3658)
50
50
50
41
31
24
(A + B) ÷ 2 = 11'-6" (3505)
50
50
50
41
31
24
(A + B) ÷ 2 = 11'-0" (3353)
50
50
50
41
31
24
(A + B) ÷ 2 = 10'-6" (3200)
50
50
50
41
31
24
(A + B) ÷ 2 = 10'-0" (3048)
50
50
50
41
31
24
(A + B) ÷ 2 = 9'-6" (2896)
50
50
50
41
31
24
(A + B) ÷ 2 = 9'-0" (2743)
50
50
50
41
31
24
(A + B) ÷ 2 = 8'-6" (2591)
50
50
50
41
31
24
(A + B) ÷ 2 = 8'-0" (2438)
50
50
50
41
31
24
(A + B) ÷ 2 = 7'-6" (2286)
50
50
50
41
31
24
(A + B) ÷ 2 = 7'-0" (2134)
50
50
50
41
31
24
(A + B) ÷ 2 = 6'-6" (1981)
50
50
50
41
31
24
(A + B) ÷ 2 = 6'-0" (1829)
50
50
50
41
31
24
(A + B) ÷ 2 = 5'-6" (1676)
50
50
50
41
31
24
(A + B) ÷ 2 = 5'-0" (1524)
50
50
50
41
31
25
20
(A + B) ÷ 2 = 4'-6" (1372)
50
50
50
42
32
26
21
(A + B) ÷ 2 = 4'-0" (1219)
50
50
50
44
34
28
23
(A + B) ÷ 2 = 3'-6" (1067)
50
50
50
47
37
31
25
22
(A + B) ÷ 2 = 3'-0" (914)
50
50
50
50
42
35
29
25
21
(A + B) ÷ 2 = 2'-6" (762)
50
50
50
50
49
40
34
29
25
22
(A + B) ÷ 2 = 2'-0" (610)
50
50
50
50
50
50
42
36
31
27
(A + B) ÷ 2 = 1'-6" (457)
50
50
50
50
50
50
50
47
41
36
C = (length of join)
264
PSF
A A
B
B C
C
Andersen® 200 Series V-Notch Gusset Plate
3'-6"
4'-0"
4'-6"
5'-0"
5'-6"
6'-0"
6'-6"
7'-0"
7'-6"
8'-0"
(1067)
(1219)
(1372)
(1524)
(1676)
(1829)
(1981)
(2134)
(2286)
(2438)
• Numerical values in charts represent structural pressure only. • Dimensions in parentheses are in millimeters. • Structural performance of any combination is only as high as the lowest structural performance of any individual unit or joining material in the combination. • Andersen® products must be installed and anchored properly according to joining and installation guides to meet rated structural performance. Refer to product joining and installation guides at andersenwindows.com. • Additional windload tables are available at andersenwindows.com.
TECHNICAL DATA
Windows – 200 Series Double-Hung 2-Way Joining with V-Notch Gusset Plates (A + B) ÷ 2 = 12'-0" (3658)
20
(A + B) ÷ 2 = 11'-6" (3505)
20
(A + B) ÷ 2 = 11'-0" (3353)
21
(A + B) ÷ 2 = 10'-6" (3200)
22
(A + B) ÷ 2 = 10'-0" (3048)
24
(A + B) ÷ 2 = 9'-6" (2896)
25
(A + B) ÷ 2 = 9'-0" (2743)
26
20
(A + B) ÷ 2 = 8'-6" (2591)
28
21
(A + B) ÷ 2 = 8'-0" (2438)
30
23
(A + B) ÷ 2 = 7'-6" (2286)
32
24
(A + B) ÷ 2 = 7'-0" (2134)
34
26
20
(A + B) ÷ 2 = 6'-6" (1981)
37
28
22
(A + B) ÷ 2 = 6'-0" (1829)
40
30
24
(A + B) ÷ 2 = 5'-6" (1676)
43
33
26
21
(A + B) ÷ 2 = 5'-0" (1524)
48
36
29
23
(A + B) ÷ 2 = 4'-6" (1372)
50
41
32
26
21
(A + B) ÷ 2 = 4'-0" (1219)
50
46
36
29
24
20
(A + B) ÷ 2 = 3'-6" (1067)
50
50
41
33
27
23
(A + B) ÷ 2 = 3'-0" (914)
50
50
48
39
32
27
23
20
(A + B) ÷ 2 = 2'-6" (762)
50
50
50
47
39
32
27
24
21
(A + B) ÷ 2 = 2'-0" (610)
50
50
50
50
48
41
34
30
26
(A + B) ÷ 2 = 1'-6" (457)
50
50
50
50
50
50
46
40
35
30
C = (length of join)
3'-6"
4'-0"
4'-6"
5'-0"
5'-6"
6'-0"
6'-6"
7'-0"
7'-6"
8'-0"
(1067)
(1219)
(1372)
(1524)
(1676)
(1829)
(1981)
(2134)
(2286)
(2438)
A A
B
B C
C
Andersen® 200 Series V-Notch Gusset Plate
PSF
Combination Design, Product Performance, Installation & Warranty
Average Adjacent Window Dimension
200 Series: Tilt-Wash Double-Hung, Picture, Transom and Half Circle Windows
23
Patio Doors – Gliding 1-Way Vertical (Ribbon) Joining
Average Adjacent Door Dimension
400 Series: Frenchwood® Gliding Patio Doors, Frenchwood® Patio Door Sidelights 200 Series: Narroline® Gliding, Perma-Shield® Gliding Patio Doors (A + B) ÷ 2 = 8'-0" (2438)
65
65
65
65
61
51
44
37
33
29
(A + B) ÷ 2 = 7'-6" (2286)
65
65
65
65
61
51
44
37
33
29
(A + B) ÷ 2 = 7'-0" (2134)
65
65
65
65
61
51
44
37
33
29
(A + B) ÷ 2 = 6'-6" (1981)
65
65
65
65
61
51
44C
38
33
30
(A + B) ÷ 2 = 6'-0" (1829)
65
65
65
65
61
51
44
38
34
31
(A + B) ÷ 2 = 5'-6" (1676)
65
65
65
65
61
52
45
39
35
32
(A + B) ÷ 2 = 5'-0" (1524)
65
65
65
65
62
53
46
41
37
33
(A + B) ÷ 2 = 4'-6" (1372)
65
65
65
65
63
55
48
A43
B 39
35
(A + B) ÷ 2 = 4'-0" (1219)
65
65
65
65
65
58
51
46
42
38
(A + B) ÷ 2 = 3'-6" (1067)
65
65
65
65
65
62
55
50
46
42
(A + B) ÷ 2 = 3'-0" (914)
65
65
65
65
65
65
62
56
51
(A + B) ÷ 2 = 2'-6" (762)
65
65
65
65
65
65
65
64
59
(A + B) ÷ 2 = 2'-0" (610)
65
65
65
65
65
65
65
65
65
(A + B) ÷ 2 = 1'-6" (457)
65
65
65
65
65
65
65
65
65
65
C = (length of join)
3'-6"
4'-0"
4'-6"
5'-0"
5'-6"
6'-0"
6'-6"
7'-0"
7'-6"
(1067)
(1219)
(1372)
(1524)
(1676)
(1829)
(1981)
(2134)
(2286)
8'-0" A
PSF
C
C
A
B
47 55 65
(2438)
B
• Numerical values in charts represent structural pressure only. • Dimensions in parentheses are in millimeters. • Structural performance of any combination is only as high as the lowest structural performance of any individual unit or joining material in the combination. • Andersen® products must be installed and anchored properly according to joining and installation guides to meet rated structural performance. Refer to product joining and installation guides at andersenwindows.com. • Additional windload tables are available at andersenwindows.com.
265
COMBINATION DESIGNS Patio Doors – Gliding & Hinged 1-Way Horizontal (Stack) Joining
Average Adjacent Door Dimension
400 Series: Frenchwood® Gliding Patio Doors, Frenchwood® Patio Door Transoms / 200 Series: Narroline® Gliding, Perma-Shield® Gliding Patio Doors (A + B) ÷ 2 = 12'-6" (3810)
65
65
65
65
52
40
31
25
(A + B) ÷ 2 = 12'-0" (3658)
65
65
65
65
52
40
31
25
(A + B) ÷ 2 = 11'-6" (3505)
65
65
65
65
52
40
31
25
(A + B) ÷ 2 = 11'-0" (3353)
65
65
65
65
52
40
31
25
(A + B) ÷ 2 = 10'-6" (3200)
65
65
65
65
52
40
31
25
(A + B) ÷ 2 = 10'-0" (3048)
65
65
65
65
52
40
31
25
(A + B) ÷ 2 = 9'-6" (2896)
65
65
65
65
52
40
31
25
(A + B) ÷ 2 = 9'-0" (2743)
65
65
65
65
52
40
31
25
(A + B) ÷ 2 = 8'-6" (2591)
65
65
65
65
52
40
31
25
(A + B) ÷ 2 = 8'-0" (2438)
65
65
65
65
52
40
31
25
(A + B) ÷ 2 = 7'-6" (2286)
65
65
65
65
52
40
31
25
(A + B) ÷ 2 = 7'-0" (2134)
65
65
65
65
52
40
31
25
(A + B) ÷ 2 = 6'-6" (1981)
65
65
65
65
52
40
31
25
(A + B) ÷ 2 = 6'-0" (1829)
65
65
65
65
52
40
32
25
20
(A + B) ÷ 2 = 5'-6" (1676)
65
65
65
65
52
40
32
26
20
(A + B) ÷ 2 = 5'-0" (1524)
65
65
65
65
53
41
34
28
22
(A + B) ÷ 2 = 4'-6" (1372)
65
65
65
65
54
44
36
29
23
(A + B) ÷ 2 = 4'-0" (1219)
65
65
65
65
58
47
39
32
25
21
(A + B) ÷ 2 = 3'-6" (1067)
65
65
65
65
63
51
43
35
28
23
(A + B) ÷ 2 = 3'-0" (914)
65
65
65
65
65
58
49
40
32
26
(A + B) ÷ 2 = 2'-6" (762)
65
65
65
65
65
65
57
47
38
31
(A + B) ÷ 2 = 2'-0" (610)
65
65
65
65
65
65
65
58
47
38
(A + B) ÷ 2 = 1'-6" (457)
65
65
65
65
65
65
65
65
62
51
C = (length of join)
3'-6"
4'-0"
4'-6"
5'-0"
5'-6"
6'-0"
6'-6"
7'-0"
7'-6"
8'-0"
(1067)
(1219)
(1372)
(1524)
(1676)
(1829)
(1981)
(2134)
(2286)
(2438)
PSF
A
B
C
• Dimensions in parentheses are in millimeters. • Structural performance of any combination is only as high as the lowest structural performance of any individual unit or joining material in the combination. • Andersen® products must be installed and anchored properly according to joining and installation guides to meet rated structural performance. Refer to product joining and installation guides at andersenwindows.com. • Additional windload tables are available at andersenwindows.com.
1-Way & 2-Way Aluminum Joining
10' Max. (3048)
8' Max. (2438)
400 Series: Frenchwood® Hinged Inswing and Outswing Patio Doors, Frenchwood® Patio Doors Sidelights and Transoms
1-Way Maximum design pressure 25 PSF
10' Max. (3048) 10' Max. (3048)
Note: When joining hinged inswing or outswing patio doors, do not join hinge jamb to hinge jamb.
2-Way Maximum design pressure 20 PSF
Aluminum Joining Material
Note: When joining hinged inswing or outswing patio doors, do not join hinge jamb to hinge jamb.
1-Way LVL Joining
8' Max. (2438)
400 Series: Frenchwood® Gliding, Frenchwood® Hinged Inswing and Outswing Patio Doors, Frenchwood® Patio Door Sidelights and Transoms 200 Series: Narroline® Gliding, Perma-Shield® Gliding Patio Doors
Maximum rating for 4 9/16" (116) LVL is equivalent to +62/-77 PSF Maximum for four-panel patio doors is equivalent to 40 PSF 4 9/16" (116) x 3/4" (19) LVL Joining Material
266
TECHNICAL DATA
Patio Doors – Gliding & Hinged 2-Way LVL Joining
4 /16" (116) LVL Average Adjacent Door/Transom/Sidelight Dimension
9
(A + B) ÷ 2 = 8'-0" (2438)
30
27
25
23
21
20
(A + B) ÷ 2 = 7'-9" (2362)
31
29
26
24
22
21
(A + B) ÷ 2 = 7'-6" (2286)
32
29
27
25
23
21
(A + B) ÷ 2 = 7'-3" (2210)
33
30
27
25
23
21
20
(A + B) ÷ 2 = 7'-0" (2134)
34
31
29
24
24
22
21
(A + B) ÷ 2 = 6'-9" (2057)
35
32
29
27
25
23
21
(A + B) ÷ 2 = 6'-6" (1981)
36
33
31
28
26
24
22
20
(A + B) ÷ 2 = 6'-3" (1905)
37
34
31
29
27
25
23
21
(A + B) ÷ 2 = 6'-0" (1829)
39
35
33
30
27
25
23
22
20
(A + B) ÷ 2 = 5'-9" (1753)
40
37
34
31
29
27
25
23
21
(A + B) ÷ 2 = 5'-6" (1676)
42
38
35
33
30
27
25
23
22
20
(A + B) ÷ 2 = 5'-3" (1600)
43
40
37
34
31
29
27
25
23
21
(A + B) ÷ 2 = 5'-0" (1524)
45
42
39
35
33
30
27
25
23
22
(A + B) ÷ 2 = 4'-9" (1448)
47
44
40
37
34
31
29
27
25
23
(A + B) ÷ 2 = 4'-6" (1372)
50
46
42
39
35
33
30
28
26
24
(A + B) ÷ 2 = 4'-3" (1295)
53
49
45
41
37
35
32
29
27
25
(A + B) ÷ 2 = 4'-0" (1219)
56
51
47
43
39
37
33
31
29
27
(A + B) ÷ 2 = 3'-9" (1143)
59
54
50
46
42
39
35
33
30
28
(A + B) ÷ 2 = 3'-6" (1067)
63
57
53
49
45
41
38
35
32
30
(A + B) ÷ 2 = 3'-3" (991)
67
62
57
52
48
44
41
37
33
32
(A + B) ÷ 2 = 3'-0" (914)
73
67
61
56
51
47
43
40
37
34
C = (length of join)
PSF
7'-9"
8'-0"
8'-3"
8'-6"
8'-9"
9'-0"
9'-3"
9'-6"
9'-9"
10'-0"
(2362)
(2438)
(2515)
(2591)
(2667)
(2743)
(2819)
(2896)
(2972)
(3048)
(A + B) ÷ 2 = 8'-0" (2438)
45
43
43
41
41
40
37
36
35
35
6 /16" (167)
(A + B) ÷ 2 = 7'-9" (2362)
46
45
44
43
42
41
38
37
37
35
(A + B) ÷ 2 = 7'-6" (2286)
47
46
45
44
43
42
39
38
37
37
LVL
(A + B) ÷ 2 = 7'-3" (2210)
49
47
47
45
44
43
40
39
39
38
(A + B) ÷ 2 = 7'-0" (2134)
50
49
48
47
45
45
41
41
40
39
(A + B) ÷ 2 = 6'-9" (2057)
51
51
49
48
47
46
43
42
41
40
(A + B) ÷ 2 = 6'-6" (1981)
53
52
51
50
49
47
44
43
42
41
(A + B) ÷ 2 = 6'-3" (1905)
55
54
53
51
50
49
46
45
44
43
(A + B) ÷ 2 = 6'-0" (1829)
57
56
55
53
52
51
47
47
45
45
(A + B) ÷ 2 = 5'-9" (1753)
59
58
57
55
54
53
49
49
47
47
(A + B) ÷ 2 = 5'-6" (1676)
62
61
59
57
56
55
51
51
49
49
(A + B) ÷ 2 = 5'-3" (1600)
65
63
61
60
59
57
53
53
51
51
(A + B) ÷ 2 = 5'-0" (1524)
67
66
64
63
61
60
56
55
54
53
(A + B) ÷ 2 = 4'-9" (1448)
71
69
67
65
64
63
59
57
57
55
(A + B) ÷ 2 = 4'-6" (1372)
74
73
71
69
67
65
62
61
59
58
(A + B) ÷ 2 = 4'-3" (1295)
77
76
75
73
71
69
65
64
63
61
(A + B) ÷ 2 = 4'-0" (1219)
77
77
77
77
75
73
69
67
66
65
(A + B) ÷ 2 = 3'-9" (1143)
77
77
77
77
77
77
73
72
70
69
(A + B) ÷ 2 = 3'-6" (1067)
77
77
77
77
77
77
77
76
75
73
(A + B) ÷ 2 = 3'-3" (991)
77
77
77
77
77
77
77
77
77
77
(A + B) ÷ 2 = 3'-0" (914)
77
77
77
77
77
77
77
77
77
77
Average Adjacent Door/Transom/Sidelight Dimension
9
C = (length of join)
PSF
7'-9"
8'-0"
8'-3"
8'-6"
8'-9"
9'-0"
9'-3"
9'-6"
9'-9"
10'-0"
(2362)
(2438)
(2515)
(2591)
(2667)
(2743)
(2819)
(2896)
(2972)
(3048)
4 9/16" (116) x 3/4" (19) LVL Joining Material
Note: When joining hinged inswing or outswing patio doors, do not join hinge jamb to hinge jamb.
6 9/16" (167) x 3/4" (19) LVL Joining Material
• Numerical values in charts represent structural pressure only. • Dimensions in parentheses are in millimeters. • Structural performance of any combination is only as high as the lowest structural performance of any individual unit or joining material in the combination. • Andersen® products must be installed and anchored properly according to joining and installation guides to meet rated structural performance. Refer to product joining and installation guides at andersenwindows.com. • Additional windload tables are available at andersenwindows.com.
267
Combination Design, Product Performance, Installation & Warranty
400 Series: Frenchwood® Gliding, Hinged Inswing and Outswing Patio Doors, Frenchwood® Patio Door Sidelights and Transoms 200 Series: Narroline® Gliding, Perma-Shield® Gliding Patio Doors
COMBINATION DESIGNS Patio Doors & 400 Series Windows 1-Way or 2-Way Steel Joining
Average Adjacent Window/Door Dimension
400 Series: Patio Doors and Windows 200 Series: Patio Doors (A + B) ÷ 2 = 12'-6" (3810)
40
37
33
25
22
(A + B) ÷ 2 = 12'-0" (3658)
40
37
34
26
23
(A + B) ÷ 2 = 11'-6" (3505)
40
38
35
27
24
(A + B) ÷ 2 = 11'-0" (3353)
40
39
36
29
25
(A + B) ÷ 2 = 10'-6" (3200)
40
40
37
30
27
21
(A + B) ÷ 2 = 10'-0" (3048)
40
40
37
32
28
22
(A + B) ÷ 2 = 9'-6" (2896)
40
40
39
34
30
23
20
(A + B) ÷ 2 = 9'-0" (2743)
40
40
40
36
32
25
21
(A + B) ÷ 2 = 8'-6" (2591)
40
40
40
37
34
27
22
(A + B) ÷ 2 = 8'-0" (2438)
40
40
40
39
36
28
24
(A + B) ÷ 2 = 7'-6" (2286)
40
40
40
40
37
31
27
21
(A + B) ÷ 2 = 7'-0" (2134)
40
40
40
40
40
32
28
22
(A + B) ÷ 2 = 6'-6" (1981)
40
40
40
40
40
36
31
25
23
(A + B) ÷ 2 = 6'-0" (1829)
40
40
40
40
40
39
36
27
24
20
(A + B) ÷ 2 = 5'-6" (1676)
40
40
40
40
40
40
37
30
25
24
(A + B) ÷ 2 = 5'-0" (1524)
40
40
40
40
40
40
40
36
28
25
(A + B) ÷ 2 = 4'-6" (1372)
40
40
40
40
40
40
40
37
31
27
23
20
(A + B) ÷ 2 = 4'-0" (1219)
40
40
40
40
40
40
40
40
37
30
26
25
21
(A + B) ÷ 2 = 3'-6" (1067)
40
40
40
40
40
40
40
40
40
36
27
26
25
(A + B) ÷ 2 = 3'-0" (914)
40
40
40
40
40
40
40
40
40
40
36
30
26
23
(A + B) ÷ 2 = 2'-6" (762)
40
40
40
40
40
40
40
40
40
40
40
38
34
26
20
(A + B) ÷ 2 = 2'-0" (610)
40
40
40
40
40
40
40
40
40
40
40
40
40
34
28
5'-6"
6'-0"
6'-6"
7'-0"
7'-6"
8'-0"
8'-6"
9'-0"
9'-6"
10'-0" 10'-6" 11'-0" 11'-6" 12'-0" 12'-6"
(1676) or less
(1829)
(1981)
(2134)
(2286)
(2438)
(2591)
(2743)
(2896)
(3048)
C = (length of join)
PSF
B C A A
B
C
Intended for use with patio door to window joins only. Please refer to patio door tables for further information regarding structural support between doors. When using exterior extension jambs on Frenchwood® hinged patio doors, special conditions apply. For complete installation details visit andersenwindows.com
(3200)
(3353)
(3505)
(3658)
(3810)
Figure 1 Andersen recommends use of a separating structural header between the door head and sill of any transom unit(s). If you choose not to use a header, and a single row of transom units is desired above the door, make sure the units are securely fastened to the adjacent framing and securely "hung" by screwing through the transom unit frame(s) into the header above. Steel joining may be required. IMPORTANT: HEADER SAG MAY
Figure 1
ADVERSELY AFFECT THE PROPER FUNCTIONING AND PERFORMANCE OF THE DOOR AND/OR WINDOW. No weight from the transom unit(s) may be transferred to the door head if proper operation of the door is to be achieved. For four-panel doors, see Figure 3. Figure 2 Any transom combination made up of more than a single row of windows must have a separating header (by others).
Figure 2
Figure 3 Always use a structural header to separate transom windows from four-panel gliding doors. For all other door types, see Figure 1. Figure 4 Steel reinforcing is recommended whenever transom or sidelight windows are
Figure 3
Figure 4
placed above or beside door units. • Numerical values in charts represent structural pressure only. • Dimensions in parentheses are in millimeters. • Structural performance of any combination is only as high as the lowest structural performance of any individual unit or joining material in the combination. • Andersen® products must be installed and anchored properly according to joining and installation guides to meet rated structural performance. Refer to product joining and installation guides at andersenwindows.com. • Additional windload tables are available at andersenwindows.com.
268
TECHNICAL DATA
Andersen速 Window and Patio Door Altitude Limits
The use of dual-pane insulating glass at altitudes higher than its rating will result in severe glass distortion, increased glass breakage potential, and a risk for seal failure. Product
2,000
3,000
4,000
400 Series Casement & Awning Windows
400 Series Casement/Awning Transom & Picture Windows 400 Series Woodwright速 Double-Hung Windows E = equal sash C = cottage sash Designate product code as WDH, WU, WH or WA.
400 Series Woodwright速 Transom Window
400 Series Woodwright速 Picture Window
CTR1510 CTR1810 CTR2010 CTR2410 CTR2810
4,000 CTR3010 CTR2910 CTR3410 CTR4010 CTR4810 18210 20210 24210 30210 26210
5,000 CR12 CR13 CR135 CR14 CR15 CR16 CR45 CR155 CR125
CTR5010 CTR5210 CTR51110 CTR6010 CTR7010 34210 28210 210210 38210
1832 1836 18310 1842 2632 2636 2832 3436 1846 18410 1852 1856E 18510 4,000 21036 WTR1810 WTR4210 WTR31015 WTR31017 WTR20111 WTR1815 WTR3410 WTR41010 WTR4217 WTR20121 WTR1817 WTR1823 WTR5610 WTR41017 WTR2023 WTR18111 WTR1827 WTR4215 WTR6210 WTR2027 WTR18121 WTR1831 WTR2017 WTR5617 WTR2031 WTR31010 WTR2010 WTR2410 WTR310111 WTR2815 WTR2015 WTR2415 WTR42111 WTR2817 WTR3415 WTR2417 WTR410111 WTR3010 WTR3417 WTR2810 WTR56111 WTR3015 WTR3810 WTR41015 WTR62111 WTR3017 WTR3815 WTR5615 WTR24111 WTR6217 WTR3817 WTR6215 WTR24121 WTR28111 WPW10310 WPW1042 WPW1046 WPW10410 WPW1052 WPW1056 WPW10510 WPW1062
400 Series Tilt-Wash Double-Hung Windows E = equal sash C = cottage sash
TW18210 TW1832 TW1836 TW18310 TW2432 TW26210 TW2632 TW28210
5,000 TW2828 TW21032 TW1842 TW3032 TW1846 TW30210 TW18410 TW18510 TW1852 TW1862 TW1856E TW1856C TW2832 TW20210 TW210210 TW2032
400 Series Tilt-Wash Picture Window
DP10310 DP1042 DP1046 DP10410 DP1052 DP1056 DP10510 DP1062
TWT1810 TWT1815 TWT1817 TWT18111 400 Series TWT1821 Tilt-Wash Transom TWT1823 Window TWT1827 TWT1831 TWT2010 TWT2015
4,000 TWT2017 TWT21010 TWT2410 TWT21015 TWT2415 TWT21017 TWT2417 TWT3010 TWT2610 TWT3015 TWT2615 TWT3017 TWT2617 TWT3410 TWT2810 TWT3415 TWT2815 TWT3810 TWT2817 TWT3815
TWT3817 TWT31010 TWT4210 TWT41010 TWT5610 TWT6210 TWT3417
TW34210 TW3432 TW38210 TW3832 TW24210 TW1872 TW1876
TWT20111 TWT2021 TWT2023 TWT2027 TWT2031 TWT24111
Smaller windows are most affected by altitude changes. An increase in altitude results in a decrease in atmospheric pressure. A sealed insulating glass unit attempts to combat this change by increasing its volume to reduce its pressure. One way to increase its volume is by glass deflection. A smaller window is stiffer and does not deflect as much as a larger window; therefore, it cannot relieve the pressure as readily. Thus, the load applied to the glass is greater, resulting in a greater risk for breakage. Another way the window tries to increase its volume is by increasing the edge area; i.e. the seal area. The increased pressure applied to the edge seal load for a smaller window is therefore greater, increasing the chance for seal failure.
6,000
7,000
C12 AN251 C13 C135 C145 A281 C125 CXW12
3032 3036 3832 1862 1856C 2032 2036 2432 2836 3432 21032 3836 2436
20310 2042 2046 20410 210310 21042 30310 3042 2052 2056E 20510 2062
2056C 3442 38310 3842 24310 2442 26310 2642 28310 34310 2842
2446 24410 2452 2456E 24510 2462 2456C
2646 2846 21046 3046 3048 3446 3846
WTR28121 WTR30111 WTR31021 WTR4221 WTR41021 WTR5621 WTR6221 WTR30121 WTR34111 WTR34121 WTR38111 WTR38121
WTR2423 WTR2427 WTR2431 WTR2823 WTR3023 WTR3423
WTR3823 WTR31023 WTR4223 WTR41023 WTR5623 WTR6223
WTR2827 WTR2831 WTR3027 WTR3427 WTR3827
WTR31027 WTR3031 WTR4227 WTR3431 WTR41027 WTR3831 WTR5627 WTR6227
TW2036 TW20310 TW2042 TW2046 TW28310 TW21036 TW210310 TW3036 TW2072
TWT26111 TWT28111 TWT210111 TWT310111 TWT34111 TWT38111
6,000 TW20410 TW2052 TW2056E TW20510 TW2062 TW3436 TW34310 TW3836 TW2076
TWT2421 TWT2423 TWT2427 TWT2431 TWT2621 TWT2623 TWT2821 TWT2823
C14 C15 C155 C16 CW12
8,000
CN12 CN13 CN135 CN14 CN145 CN15 CN155 CN16 AN251 AN281
TW38310 TW2056C TW2436 TW24310 TW2636 TW26310 TW30310 TW2836
TWT21021 TWT21023 TWT3021 TWT3023 TWT3421 TWT3423 TWT3821 TWT3823
7,000 TW2442 TW2642 TW2842 TW21042 TW3042 TW3442 TW3842
TWT2627 TWT2631 TWT2827 TWT2831 TWT21027 TWT3027 TWT3427 TWT3827
9,000
CW13 CW135 CW14 CX125 AX251 CW125 CXW125
CW145 CW15 CW155 CW16 AW251 AW281
CX13 CX135 CX14 CX145 CX15 CX155 CX16
AXW281 AX31 AX351 AX41 AX451 AX51 AX551 AX61
P3030 P3035 P3040 P3045
P3050 P3055 P3060
P3535 P3540 P3545 P3550
P5050 P3555 P3560 P4040
26410 2652 2656E 26510 3052 34410 3452 38410 2662 2656C
28410 2852 2856E 28510 2862 2856C 210410 21052 3852 30410
21056E 210510 21062 21056C
3056E 3456E 3856E
10,000 A335/CP353 CP3535 CXW3/CP303 CXW35 CXW4
10,000 P4045 P4050 P5055 P4055 30510 3062 3056C 34510 3462
CXW45 CXW5/CP305 CXW155 CXW6
P4060 P4545 P4550 P4555
Combination Design, Product Performance, Installation & Warranty
The chart below gives the altitude limit in feet for most 400 Series and 200 Series products in this catalog. If the installation of a given product is at an altitude greater than that shown in this chart, a capillary breather tube must be ordered. Be aware that the use of a capillary breather tube eliminates argon gas blend fill and will result in a slightly lower thermal performance (approximately 0.02 increase in window U-factor). For NFRC certified total unit performance on units with capillary breather tubes for higher altitude applications, please visit andersenwindows.com/nfrc.
P5060 P4560
3456C 38510 3862 3856C
WTR31031 WTR4231 WTR41031 WTR5631 WTR6231
WPW30310 WPW3056 WPW34310 WPW3456 WPW310310 WPW31056 WPW3042 WPW30510 WPW3442 WPW34510 WPW31042 WPW310510 WPW3046 WPW3062 WPW3446 WPW3462 WPW31046 WPW31062 WPW30410 WPW34410 WPW3452 WPW310410 WPW42310 WPW3052 WPW4262 WPW41052 WPW410310 WPW41056 WPW41042 WPW410510 WPW41046 WPW41062 WPW410410 WPW56310 WPW5656 WPW4242 8,000 9,000 WPW31052 TW2446 TW2646 TW26410 TW2656C TW2672 TW21056E TW3456E TW24410 TW2846 TW2652 TW28410 TW2676 TW210510 TW34510 TW2452 TW21046 TW2656E TW2852 TW2872 TW21062 TW3462 TW2456E TW3046 TW26510 TW2856E TW2876 TW21056C TW3456C TW24510 TW3048 TW2862 TW3052 TW3056E TW3856E TW2462 TW3446 TW2856C TW34410 TW30510 TW38510 TW2456C TW3846 TW210410 TW3452 TW3062 TW3856C TW2472 TW21052 TW38410 TW3056C TW3862 TW2476 TW30410 TW3852 TW2662 TW28510 DP3062 DP30310 DP3052 DP34310 DP3456 DP3042 DP3056 DP3442 DP34510 DP30510 DP3446 DP310310 DP30410 DP3462 DP34410 DP31042 DP42310 DP4256 DP4242 DP42510 DP4246 DP4262 DP42410 DP410310 DP41062 DP5652 DP56310 DP5656 DP41042 DP410510 DP5642 DP56510 DP3452 DP31046 TWT21031 TWT3431 TWT3031 TWT3831
WPW42410 WPW4252 WPW4256 WPW5642 WPW5646 WPW56410 WPW5652 WPW56510 WPW5662 WPW42510 WPW4246 TW21072 TW21076 TW3072 TW3076 TW3472 TW3476 TW3872 TW3876 DP310410 DP31052 DP31056 DP310510 DP41046 DP410410 DP41052 DP41056 DP5646 DP5662 DP56410 DP4252 DP31062
continued on next page
269
PRODUCT PERFORMANCE Andersen® Window and Patio Door Altitude Limits Product
2,000
3,000
4,000 G32 G33 G336 CTC1 CTCW1 CTN20
400 Series Gliding Window 400 Series Half Circle Quarter Circle & Elliptical Windows 400 Series Circle & Oval Window Flexiframe®- rectangular* 0-19"
(0-483)
Flexiframe - non-rectangular* 0-35"
(0-889)
400 Series Arch Window
20-24"
G34 G35 G42 CTN24 CTCX1
(635-711)
36-46"
(1194-1372)
AFC13 AFC135 AFC14 AFFW801 AFC145 AFC15 AFC155 AFC16 AFC18 AFFW601
G44 G45
CTN28 CTN30
ET8
55-60"
AFCW12 AFCW13 AFCW135 AFCW14 AFCW145 AFCW15
CTN34 CTC2
SE3106
3,000 SF CR3 SF CR35
SF CR4 SF CR5 SF CR6 SF CN3 3,000 400 Series Eyebrow Window FCD34 FCCW2 FCCXW3 FCFW50 OC20 400 Series Gothic, Octagon, GT2036 Monumental Circle and Quarter GT2440 Circle Windows GT3046 400 Series Frenchwood® Gliding Patio Door 400 Series Frenchwood® Hinged Patio Doors FWT6016 FWT6011 FWT5416 FWT5411 400 Series Frenchwood® Patio FWSL1368 Door Sidelight FWSL13611 400 Series Frenchwood® Patio FWSLT17110 Door Sidelight Transom FWSLT1716 400 Series Frenchwood® Patio Door Transom
4,000 SF CN35 SF CN4 SF CN5 SF CN6 FCD28 FCD30 OC24
4,000 FWT5016 FWT4111 FWT2111 FWT3116 FWT5011 FWT3111 FWT4116 FWT2916 FWSL1380 FWSL17611 FWSL1768 FWSL1780 FWSLT1311 FWSLT13110 FWSLT1711 FWSLT1316
200 Series Tilt-Wash Double-Hung Window
SF C5 SF C6 4,000 FCD38 FCC2
SF CW35 SF CW4 SF CW5
200 Series Tilt-Wash Transom Window 200 Series Tilt-Wash Half Circle Window
4,000 FX2416 FX2010 FX2810 FX3416 CT24 CT28
(1803-2032)
AFCP303 AFC22 AFCW22 AFFW502
AFCP3035 AFCP304 AFCP3045 AFCP305 AFCP3055
SE311
SE312 SE313 SE3135 SE314 SE3145
200 Series Narroline® Gliding Patio Door 200 Perma-Shield® Gliding Patio Door 200 Series Hinged Inswing Patio Door
CIR30 >51"
(1194-1295)
(>1295)
AFC235 AFFW5035 AFFW603 AFFW6035 AFC24
AFCW24 AFCW245 AFCW25 AFCW255 AFFW6055 AFFW606 AFFW608 AFFW8035 AFCW26 AFCW28 AFFW504 AFFW5045
>80"
AFFW1202 AFC23 AFCW23
9,000 SE541 SE581 SP402 SP403 SP4035
SE315 SE3155 SE316 SE5406 SE5806 SE6006
SE601 SP404 SP4045 SP405 SP4055 SP406 ELFW6006 ELFW8006
SF CXW4 SF CXW5 SF CXW6
OC30
FWT2911 FWT2716 FWT2711 FWT2116
FWT60110 FWT54110 FWT50110 FWT41110
FWT31110 FWT29110 FWT27110 FWT21110
DH1830 DH1836 DH1840 DH1846 DH1849
5,000 DH1850 DH1856 DH1860 DH2030 DH2430
ISPD4168 ISPD4176 ISPD41611 ISPD4180
CTN30-2 CTQA3
(>2032)
AFCP306 AFCP308 AFFW602 AFFW802
GT4056
4180
200 Series Gliding Window
10,000
AFFW505 AFFW8045 AFFW805 AFFW8055 AFFW806 AFFW5055 AFFW506 AFFW508 AFFW604 AFFW6045 AFFW804 AFFW605
10,000 SE546 SE5845 SE582 SE585 SE583 SE5855 SE5835 SE586 SE6055 SE542 SE606 SE543 SP8006 SE5435 SP801 SE544 SE584 SE602 ELFW601 ELFW801 ELFW602 ELFW802
AFC24 AFC245 AFC25 AFC255 AFC26 AFC28 AFCW235 AFFW803
SE603 SE6035 SE604 SE6045 SE545 SE5455 SP802 SE5445 SE605
FCFW60
4168 41611
FX3010 FX1810 FX2816 FX1820 CT30 CT18
(1067-1168)
71-80"
(1549-1778)
DH2830 DH3030 DH3430
FX3420 FX3020 FX2820
FR40
QR40
10,000 FWG5068 FWG5080 FWG60611 FWG50611 FWG6068 FWG6080 5068 5080 5468 50611 54611
DH2036 DH2430 DH2046 DH2049 DH2836 DH3436
6,000 DH2056 DH2060 DH2436 DH2440 DH2840 DH3440
GW4046 GW4036 GW4020 GW4050
GW4040 GW4030 GW3040 GW3036
200 Series Tilt-Wash Picture Window
FX3016 FX1816 FX2410 FX2016 CT20
CIR24 42-46"
37-41"
9,000 G636 G64 G65 CTC3 CTN28-2 CTQCX OVL3048 47-51"
CTCX2 CTQCW1
(508-610)
SF CW6 SF C35 SF C4
FX5010 FX4610
FX3410
G63
OVL2030
400 Series Springline™ Window
400 Series Springline™ Flanker Window
8,000
G54 G55
CTC42 CTQC1 CTCW2
61-70"
AFCW155 AFCW16 AFCW18 AFCP302 AFFW1201
7,000 G53 G536
(508-610)
(1397-1524)
AFC206 AF21 AFCW21 AFFW501 AFFW6006 AFFW601 AFFW8006 AFFW801 AFFW1206
6,000
CIR20 32-36"
(737-787)
47-54"
(914-1168)
AFC06 AFC11 AFCW06 AFCW11 AFCP3006 AFFW5006 AFCP301 AFCW206 AFC12
5,000 G43 G436
OVL1824 29-31"
25-28"
(508-610)
(continued)
FX2420 FX2020
DH3036 DH2050 DH3040 DH2040
DH2446 DH2449 DH2450 DH2846 DH3446
7,000 DH3046 DH2456 DH2460 DH3436 FX3056 FX3050 FX3030 FX3040 FX3046 FX3060
8,000 DH2849 DH3049 DH3449
DH2850 DH2860 DH3050
FX3049 FX4930 FX5030 FX5630 FX4030 FX4630 FX6030
FR60
FWG8068 FWG8080 FWG80611 5480 60611 6068 6080
DH2856 DH3450
DH3056 DH3060
DH3456 DH3460
FX5056 FX5050 FX4650 FX4649 FX4660 FX4040 FX4060 FX5650
FX6040 FX4046 FX4049 FX4050 FX4056 FX4640 FX4646 FX6046
10,000 FX4656 FX4940 FX4946 FX4949 FX4950 FX4956 FX4960 FX6049
GW5046 GW5036
GW6050 GW6046
FX5040 FX5046 FX5049 FX5060 FX5640 FX5646 FX5649 FX6050
CT34 GW3030 GW3020 GW4016
GW5050 GW5040 GW5030
GW6040 GW6030
GW6036
NLGD5068 NLGD5080 NLGD6068 NLGD6080 NLGD80611 NLGD50611 NLGD60611 NLGD8068 NLGD8080 PS5068 PS51168 PS61611 PS81611 PS6180 PS8180 ISPD5068 ISPD5076 ISPD5468 ISPD5476 ISPD6068 ISPD6076 ISPD60611 ISPD6080 ISPD50611 ISPD5080 ISPD54611 ISPD5480
• Deflection of glass will occur on units with larger glass areas. If interior/exterior grilles are used on double-hung windows, gliding windows or gliding patio doors, some interference may occur, affecting operation of these units. • Altitude limits for patio doors shown in two-panel configurations. These limits also qualify for same size panels used in one or multiple panel configurations. • Contact your Andersen supplier for altitude limits for custom size windows and doors. • Dimensions in parentheses are in millimeters. *Maximum short side window dimension. For Flexiframe® units use shortest dimension, width or length, and round to nearest whole number, then use limits given above for Flexiframe windows.
270
TECHNICAL DATA
Performance Standards
Performance Classes This Standard/Specification defines requirements for four performance classes. The performance classes are designated R, LC, CW, and AW. This classification system provides for several levels of performance. Product selection is always based on the performance requirements of the particular project. Elements of Performance Grade (PG) Designations In order to qualify for a given performance grade (PG), test specimens need to pass all required performance tests for the following, in addition to all required auxiliary (durability) tests (not shown here) for the applicable product type and desired performance class: (a) Operating force (if applicable): minimum and maximum operating force vary by product type and performance class. (b) Air leakage resistance: tested in accordance with ASTM E283 at a test pressure of 1.57 PSF. The allowable air infiltration for R, LC & CW is 0.3 cubic feet per minute per square foot of frame (cfm/ft 2). (c) Water penetration resistance: tested in accordance with ASTM E547 with the specified test pressure applied per AAMA/WDMA/CSA 101/I.S.2/A440-08. The test consists of four cycles. Each cycle consists of five minutes with pressure applied and one minute with the pressure released, during which the water spray is continuously applied. The water spray shall be uniformly applied at a constant rate of 5.0 U.S. gal/ft 2 • hr. (d) Uniform load deflection test: tested in accordance with ASTM E330 for both positive and negative pressure (pressure defined by AAMA/WDMA/CSA 101/I.S.2/A440-08) with the load maintained for a period of 60 seconds. After loads are removed there shall be no more permanent deformation in excess of 0.4% of its span and no damage to the unit which would make it inoperable. Starting with the 2008 specification, design pressure (DP) will only represent the “uniform load deflection test.” (e) Uniform load structural test: tested in accordance with ASTM E330 for both positive and negative pressure (pressure defined by AAMA/WDMA/CSA 101/I.S.2/A440-08) with the load maintained for a period of 10 seconds. After loads are removed there shall be no damage to the unit which would make it inoperable. (f) Forced-entry resistance (if applicable): tested in accordance with ASTM F588 (Windows), F476 (Swinging Doors) and F842 (Sliding Doors) at a performance level 10 rating. Maximum Size Tested (MST) Test size is a factor in determining compliance with this Standard/Specification. Each product type and class has a defined minimum set of requirements. The minimum test size increases with each class (i.e. R, LC, CW or AW). Minimum Requirements The minimum requirements to obtain a Performance Grade (PG) are listed below: Product Performance Class
Minimum Performance Grade (PG) (PSF)
Minimum Design Pressure (DP) (PSF)
Minimum Structural Test Pressure (STP) (PSF)
Minimum Water Penetration Test Pressure (WTP) (PSF)
Windows and Doors R 15 15 22.5 2.90 LC 25 25 37.5 3.75 CW 30 30 45.0 4.50 AW 40 40 60.0 6.00 • "Structural Test Pressure (STP)" is 150% of the Performance Grade (PG) for windows and doors. • "Water Penetration Test Pressure (WTP)" is 15% of the Performance Grade (PG).
Optional Higher Performance Grades (PG) & Corresponding Test Pressures (PSF) PG20
PG25
PG30
PG35
PG40
PG45
PG50
PG55
PG60
WTP DP
3.00 20
3.75 25
4.50 30
5.25 35
6.00 40
6.75 45
7.50 50
8.25 55
9.00 60
STP
30.0
37.5
45.0
52.5
60.0
67.5
75.0
82.5
90.0
Air 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 • Forced Entry Resistance (FER) is always a performance level 10 regardless of Performance Grade (PG). • Minimum and maximum Operating Force varies by product type.
Hallmark Certification The Window and Door Manufacturers Association (WDMA) sponsored Hallmark Certification Program is designed to provide builders, architects, specifiers and consumers with an easily recognizable means of identifying products that have been manufactured in accordance with the appropriate WDMA and other referenced performance standards. Conformance is determined by periodic in-plant inspections by a third party administrator. The inspections include auditing licensee quality control procedures and processes, and a review to confirm products are manufactured in accordance with the appropriate performance standards. Periodic testing of representative product constructions and components by a third party testing laboratory is also required. When all of the program requirements are met, the licensee is authorized to use the WDMA Hallmark registered logo on the Certification Label as a means of identifying products. Products successfully obtaining Hallmark Certification will be labeled with a 3-part code, which includes performance class, performance grade and maximum size tested. Below is a sample certification label: WINDOW & DOOR MANUFACTURERS ASSOCIATION
WDMA
Hallmark Certified www.wdma.com STANDARD
AAMA/WDMA/CSA 101/I.S.2/A440-08 AAMA/WDMA/CSA 101/I.S.2/A440-05
Andersen Corporation 400 SERIES CASEMENT WINDOW
Manufacturer Stipulates Conformance as indicated below
RATING CLASS LC(1) – PG50(2) – SIZE TESTED 56 X 71.8 in.(3) DP+50/-50(4) C-LC50 DP + 50/-50
(1) – Performance Class (2) – Performance Grade (3) – Size Tested (4) – Design Pressure In the example above, the performance class is LC, the performance grade (PG) is 50 PSF and the size tested is 56" x 71.8". What this means to the specifier is, based on the optional higher performance grade chart, the laboratory tested air infiltration was less than 0.3 cfm/ft 2 (test pressure is always 1.57 PSF and the allowable airflow is 0.3 cfm/ft 2), the product tested successfully resisted a laboratory water penetration test at a test pressure of 7.5 PSF (test pressure equals 15% of PG), the product tested successfully withstood a laboratory positive and negative structural test at a pressure of 75 PSF (test pressure equals 150% of performance grade) in both the positive and negative directions and the product tested passed the laboratory requirements for operational force and forced entry resistance. Based on this test, all products smaller in both width and height can be labeled with this product performance rating.
Important Building codes prescribe Performance Grade (PG) based on a variety of criteria (i.e. windspeed zone, building height, etc.), therefore structural test pressures should not be used for code compliance. In the example above, a PG 50 performance grade rating, which passes a 50 PSF design pressure, should be used for determining code compliance, not the structural test pressure of 75 PSF. If you need further details about how Andersen® products perform to this standard, contact your Andersen supplier. If you need further information about the AAMA/WDMA/CSA 101/I.S.2/A440-08 standard or the Hallmark Certification Program please contact: WDMA, 401 N. Michigan Avenue, Suite 2200 Chicago, IL 60611 Phone: 312-321-6802 Web: www.wdma.com Where designated, Andersen products are tested, certified and labeled to the requirements of the Hallmark Certification Program. Actual performance may vary based on variations in manufacturing, shipping, installation, environmental conditions and conditions of use.
271
Combination Design, Product Performance, Installation & Warranty
The Window and Door Manufacturers Association (WDMA), The American Architectural Manufacturers Association (AAMA) and the Canadian Standards Association (CSA) have jointly released AAMA/WDMA/CSA 101/I.S. 2/A440-08; North American Fenestration Standard/ Specification for Windows, Doors and Skylights, which calls for using “Performance Grade" as the new rating to describe products that comply to the standard. This new version dated “-08” has been adopted by the 2009 International Building Code (IBC) and the International Residential Code (IRC). Performance Grade ratings are being used to replace Design Pressure Ratings as the preferred method of measuring product performance throughout the window, door and skylight industry to define products that comply with all of the requirements of the 101/I.S.2/A440 standard. A product only achieves a “Performance Grade” or “PG” rating if that product complies with not only the structural loading requirement, but all other performance requirements such as air infiltration resistance, water penetration resistance, ease of operation and resistance to forced entry. A “Design Pressure Rating” or “DP” rating will now describe a product rating that has only been tested to structural loading and not air infiltration, water testing or other requirements for Performance Grade.
PRODUCT PERFORMANCE Performance Grade, Air Infiltration and Sound Transmission Ratings — 400 Series Windows and Patio Doors
For current performance information please visit andersenwindows.com.
AAMA/WDMA/CSA 101/IS2/A440 Performance Grade (PG)
+/Corresponding Design Pressure (DP)
Sound Transmission Class (STC)
Outdoor/Indoor Transmission Class (OITC)
Air Infiltration CFM/FT 2
Single Stationary (CXW16)
Class LC-PG50 Size Tested 35" x 71"
50/50
26
22
< 0.2
Single Venting (CXW16-155, CX16-155)
Class LC-PG40 Size Tested 35" x 71"
45/45
26
22
< 0.2
Single Venting (CXW15)
Class LC-PG45 Size Tested 71" x 60"
50/50
26
22
< 0.2
Single Venting (CW16 and smaller)
Class LC-PG50 Size Tested 56" x 71"
50/50
26
22
< 0.2
Single Venting (CXW145 and smaller)
Class LC-PG50 Size Tested 71" x 52"
50/50
26
22
< 0.2
Single Venting (CX15 and smaller)
Class LC-PG50 Size Tested 62" x 59"
50/50
26
22
< 0.2
Double Stationary (CXW245, CX25, CW26 and smaller)
Class LC-PG50 Size Tested 56" x 71"
50/50
26
22
< 0.2
Double Venting (CXW25)
Class LC-PG45 Size Tested 71" x 60"
45/45
26
22
< 0.2
Double Venting (CXW245 and smaller)
Class LC-PG50 Size Tested 71" x 52"
50/50
26
22
< 0.2
Double Venting (CX25 and smaller)
Class LC-PG50 Size Tested 62" x 59"
50/50
26
22
< 0.2
Double Venting (CW26 and smaller)
Class LC-PG50 Size Tested 56" x 71"
50/50
26
22
< 0.2
Triple Venting (CW35 and smaller)
Class LC-PG40 Size Tested 84" x 60"
40/40
26
22
< 0.2
Triple Venting (C35 and smaller)
Class LC-PG50 Size Tested 71" x 60"
50/50
26
22
< 0.2
Casement/Awning Picture Windows (P5060 and smaller)
Class LC-PG70 Size Tested 59" x 71"
70/70
29
25
< 0.2
Casement/Awning Transom Windows (CTR32410 and smaller)
Class LC-PG70 Size Tested 84" x 12"
70/70
29
25
< 0.2
Single Stationary (tempered glass, CXW16)
Class LC-PG70 Size Tested 35" x 71"
70/70
n/a
n/a
< 0.2
Single Venting (CXW145 and smaller)
Class LC-PG70 Size Tested 35" x 52"
70/70
26
22
< 0.2
Single Venting (CX16 and smaller)
Class LC-PG70 Size Tested 31" x 71"
70/70
26
22
< 0.2
Double Venting (CW26 and smaller)
Class LC-PG70 Size Tested 56" x 71"
70/70
26
22
< 0.2
Triple Venting (C35 and smaller)
Class LC-PG70 Size Tested 71" x 59"
70/70
26
22
< 0.2
Casement Venting
Class CW-PG50 Size Tested 35" x 84"
50/50
n/a
n/a
< 0.2
Casement Stationary
Class LC-PG60 Size Tested 107" x 84"
60/60
n/a
n/a
< 0.2
French Casement Venting
Class LC-PG30 Size Tested 56" x 71"
30/30
n/a
n/a
< 0.2
Single Stationary (AXW61)
Class LC-PG50 Size Tested 35" x 71"
50/50
26
21
< 0.2
Single Venting (AXW51 and smaller)
Class LC-PG35 Size Tested 59" x 35"
35/35
26
21
< 0.2
Single Venting (AX61 and smaller)
Class LC-PG35 Size Tested 72" x 31"
35/35
26
21
< 0.2
Double Venting (AXW231 and smaller)
Class LC-PG35 Size Tested 71" x 36"
35/35
26
21
< 0.2
Triple Venting (AX3251 and smaller)
Class LC-PG35 Size Tested 84" x 31"
35/35
26
21
< 0.2
Triple Venting (A313 and smaller)
Class LC-PG35 Size Tested 35" x 71"
35/35
26
21
< 0.2
Picture Venting (PA4060 and smaller)
Class LC-PG35 Size Tested 48" x 71"
35/35
n/a
n/a
< 0.2
Single Stationary (tempered glass, AXW61)
Class LC-PG70 Size Tested 35" x 71"
70/70
n/a
n/a
< 0.2
Single, Double & Triple Venting (AX3251 and smaller)
Class LC-PG60 Size Tested 84" x 31"
60/60
26
21
< 0.2
Triple Venting (A313 and smaller)
Class LC-PG60 Size Tested 35" x 71"
60/60
26
21
< 0.2
Andersen® Product Casement Windows
Casement Windows, PG Upgrade
Complementary Casement Windows
Awning Windows
Awning Windows, PG Upgrade
• "Performance Grade (PG)" ratings may vary from tested performance rating for larger or smaller units of a particular type. continued on next page • "Sound Transmission Class (STC)" & "Outdoor/Indoor Transmission Class (OITC)" ratings are for individual units based on independent tests and represent entire unit. • This data is accurate as of March 2015. Due to ongoing product changes, updated test results, or new industry standards, this data may change over time. • Where designated, Andersen products are certified and labeled to the requirements of the Hallmark Certification Program. Actual performance may vary based on variations in manufacturing, shipping, installation, environmental conditions and conditions of use. • Contact your Andersen supplier for more information.
272
TECHNICAL DATA
Performance Grade, Air Infiltration and Sound Transmission Ratings — 400 Series Windows and Patio Doors
(continued)
For current performance information please visit andersenwindows.com.
Andersen® Product
AAMA/WDMA/CSA 101/IS2/A440 Performance Grade (PG)
+/Corresponding Design Pressure (DP)
Sound Transmission Class (STC)
Outdoor/Indoor Transmission Class (OITC)
Air Infiltration CFM/FT 2
Class LC-PG30 Size Tested 45" x 76"
30/30
27
23
< 0.2
Woodwright® Full-Frame WIndows Double-Hung (3862 and smaller) Double-Hung (cottage sash, 3862 and smaller)
Class R-20 Size Tested 45" x 76"
20/20
27
23
< 0.2
Arch Double-Hung (3862 and smaller)
Class LC-PG30 Size Tested 45" x 76"
30/30
28
23
< 0.2
Springline Single-Hung (3872 and smaller)
Class LC-PG30 Size Tested 45" x 86"
30/30
28
23
< 0.2
™
Picture (5662 and smaller)
Class LC-PG65 Size Tested 67" x 76"
65/65
28
23
< 0.2
Transom (6231 and smaller)
Class LC-PG70 Size Tested 75" x 39"
70/70
28
22
< 0.2
Double-Hung (3052 and smaller)
Class LC-PG50 Size Tested 37" x 64"
50/50
27
23
< 0.2
Arch Double-Hung (3054)
Class LC-PG50 Size Tested 37" x 64"
50/50
28
23
< 0.2
Springline Single-Hung (3057)
Class LC-PG50 Size Tested 37" x 67"
50/50
28
23
< 0.2
™
Combination Design, Product Performance, Installation & Warranty
Woodwright® Full-Frame Windows, PG Upgrade
Woodwright® Insert Windows Double-Hung (3862 and smaller)
Class R-PG25 Size Tested 45" x 77"
25/25
26
21
< 0.2
Double-Hung (cottage sash, 3862 and smaller)
Class R-PG20 Size Tested 45" x 68"
20/20
26
21
< 0.2
Picture (5662 and smaller)
Class LC-PG30 Size Tested 68" x 78"
30/30
30
26
< 0.2
Transom (6878 and smaller)
Class LC-PG30 Size Tested 68" x 78"
30/35
30
26
< 0.2
Tilt-Wash Full-Frame Windows Double-Hung (3862 and smaller)
Class LC-PG30 Size Tested 45" x 76"
30/35
26
23
< 0.2
Double-Hung* (3876 and smaller)
Class LC-PG30 Size Tested 45" x 92"
30/35
26
23
< 0.2
Picture (5662 and smaller)
Class LC-PG50 Size Tested 67" x 76"
50/65
30
25
< 0.2
Transom (6231 and smaller)
Class LC-PG50 Size Tested 75" x 39"
50/50
28
23
< 0.2
Tilt-Wash Windows, PG Upgrade Double-Hung
Class LC-PG50 Size Tested 45" x 76"
50/65
26
23
< 0.2
Double-Hung (3456, 3856, 34510, 38510, 3462, 3862)
Class LC-PG50 Size Tested 45" x 76"
50/55
26
23
< 0.2
Tilt-Wash Insert Windows Double-Hung (double lock)
Class R-PG20 Size Tested 45" x 92"
20/20
27
24
< 0.2
Double-Hung (single lock)
Class R-PG20 Size Tested 35" x 92"
20/20
27
24
< 0.2
Double-Hung
Class R-PG20 Size Tested 45" x 76"
30/30
27
24
< 0.2
Gliding Windows (G65 and smaller)
Class LC-PG30 Size Tested 71" x 59"
30/30
26
22
< 0.2
Arch (AFFW6080 and smaller)
Class LC-PG50 Size Tested 71" x 105"
50/50
30
25
< 0.2
Flexiframe® (12050 and smaller)
Class LC-PG50 Size Tested 144" x 60"
50/50
30
25
< 0.2
Springline (SP802 and smaller)
Class LC-PG50 Size Tested 96" x 72"
50/50
30
25
< 0.2
Arch (tempered glass, AFFW6080 and smaller)
Class LC-PG70 Size Tested 71" x 105"
70/70
n/a
n/a
< 0.2
Flexiframe (tempered glass, 12050 and smaller)
Class LC-PG70 Size Tested 144" x 60"
70/70
n/a
n/a
< 0.2
Springline™ (tempered glass, SP802 and smaller)
Class LC-PG70 Size Tested 96" x 72"
70/70
n/a
n/a
< 0.2
Complementary Specialty Windows (direct-set, fixed)
Class LC-PG50 Size Tested 120" x 78"
50/50
28
24
< 0.2
Specialty Windows
™
Specialty Windows, PG Upgrade
®
continued on next page • "Performance Grade (PG)" ratings may vary from tested performance rating for larger or smaller units of a particular type. • "Sound Transmission Class (STC)" & "Outdoor/Indoor Transmission Class (OITC)" ratings are for individual units based on independent tests and represent entire unit. • This data is accurate as of March 2015. Due to ongoing product changes, updated test results, or new industry standards, this data may change over time. • Where designated, Andersen products are certified and labeled to the requirements of the Hallmark Certification Program. Actual performance may vary based on variations in manufacturing, shipping, installation, environmental conditions and conditions of use. • Contact your Andersen supplier for more information. *7'-4 9/16" (2250) and 7'-8 7/8" (2359) high units have interior and exterior brackets. Interior brackets, located on each side of the check rail, must be flipped up for proper product performance.
273
PRODUCT PERFORMANCE Performance Grade, Air Infiltration and Sound Transmission Ratings — 400 Series Windows and Patio Doors
(continued)
For current performance information please visit andersenwindows.com.
Andersen® Product
AAMA/WDMA/CSA 101/IS2/A440 Performance Grade (PG)
+/Corresponding Design Pressure (DP)
Sound Transmission Class (STC)
Outdoor/Indoor Transmission Class (OITC)
Air Infiltration CFM/FT 2
Class LC-PG40 Size Tested 50" x 95"
40/40
31
26
< 0.2
Frenchwood® Gliding Patio Doors Single-Panel Two-Panel
Class LC-PG40 Size Tested 95" x 95"
40/40
31
26
< 0.2
Four-Panel (8')
Class LC-PG35 Size Tested 189" x 95"
35/35
-
-
< 0.2
Four-Panel (6'-11", 6'-8")
Class LC-PG25 Size Tested 189" x 82"
25/25
-
-
< 0.2
Class LC-PG40 Size Tested 38" x 95"
40/40
30
28
< 0.2
Two-Panel
Class LC-PG40 Size Tested 71" x 95"
40/40
30
25
< 0.2
Three-Panel
Class LC-PG40 Size Tested 107" x 95"
40/40
-
-
< 0.2
Frenchwood Hinged Inswing Patio Doors ®
Single-Panel
Frenchwood Hinged Outswing Patio Doors ®
Single-Panel
Class LC-PG40 Size Tested 38" x 95"
40/40
30
25
< 0.2
Two-Panel
Class LC-PG40 Size Tested 71" x 95"
40/40
31
25
< 0.2
Frenchwood® Patio Door Sidelights
Class LC-PG65 Size Tested 18" x 95"
65/65
32
26
< 0.2
Frenchwood® Patio Door Transoms
Class LC-PG65 Size Tested 71" x 21"
65/65
29
25
< 0.2
Complementary Springline & Arch Inswing Patio Doors ™
Single Stationary
Class LC-PG45 Size Tested 37" x 95"
45/45
30
25
< 0.2
Single Active**
Class LC-PG45 Size Tested 37" x 95"
45/45
30
25
< 0.2
Two-Panel Stationary
Class LC-PG45 Size Tested 75" x 95"
45/45
30
25
< 0.2
Two-Panel Active**
Class LC-PG45 Size Tested 75" x 95"
45/45
30
25
< 0.2
Complementary Springline™ & Arch Outswing Patio Doors Single Stationary
Class LC-PG45 Size Tested 37" x 95"
45/45
31
25
< 0.2
Single Active**
Class LC-PG45 Size Tested 37" x 95"
45/45
31
25
< 0.2
Two-Panel Stationary
Class LC-PG45 Size Tested 75" x 95"
45/45
31
25
< 0.2
Two-Panel Active**
Class LC-PG45 Size Tested 75" x 95"
45/45
31
25
< 0.2
• "Performance Grade (PG)" ratings may vary from tested performance rating for larger or smaller units of a particular type. • "Sound Transmission Class (STC)" & "Outdoor/Indoor Transmission Class (OITC)" ratings are for individual units based on independent tests and represent entire unit. • This data is accurate as of March 2015. Due to ongoing product changes, updated test results, or new industry standards, this data may change over time. • Where designated, Andersen products are certified and labeled to the requirements of the Hallmark Certification Program. Actual performance may vary based on variations in manufacturing, shipping, installation, environmental conditions and conditions of use. • Contact your Andersen supplier for more information. **Tested with standard multi-point hardware.
Performance Grade, Air Infiltration and Sound Transmission Ratings — Folding Doors For current performance information please visit andersenwindows.com. AAMA/WDMA/CSA 101/IS2/A440 Performance Grade (PG)
+/Corresponding Design Pressure (DP)
Sound Transmission Class (STC)
Outdoor/Indoor Transmission Class (OITC)
Air Infiltration CFM/FT 2
1L3R
Class SP-PG30 Size Tested 159" x 119"*
30/30
30
24
< 0.2
2L2R
Class SP-PG30 Size Tested 159" x 119"*
30/30
30
24
< 0.2
Andersen Product ®
Folding Outswing Doors (up to 288" frame width)
• "Performance Grade (PG)" ratings may vary from tested performance rating for larger or smaller units of a particular type. • "Sound Transmission Class (STC)" & "Outdoor/Indoor Transmission Class (OITC)" ratings are for individual units based on independent tests and represent entire unit. • This data is accurate as of March 2015. Due to ongoing product changes, updated test results, or new industry standards, this data may change over time. • Where designated, Andersen products are certified and labeled to the requirements of the Hallmark Certification Program. Actual performance may vary based on variations in manufacturing, shipping, installation, environmental conditions and conditions of use. • Contact your Andersen supplier for more information. *Actual door size tested; certification maximum door size 288" x 119 1/2".
274
TECHNICAL DATA
Performance Grade, Air Infiltration and Sound Transmission Ratings — Residential Entry Doors For current performance information please visit andersenwindows.com.
Andersen® Product
AAMA/WDMA/CSA 101/IS2/A440 Performance Grade (PG)
+/Corresponding Design Pressure (DP)
Sound Transmission Class (STC)
Outdoor/Indoor Transmission Class (OITC)
Air Infiltration CFM/FT 2
Class LC-PG30 Size Tested 86" x 95"
30/35
30
25
< 0.2
Residential Springline™ Inswing Entry Door†† Single Stationary Single Active**
Class LC-PG30 Size Tested 86" x 95"
30/35
30
25
< 0.2
Two-Panel Stationary
Class LC-PG30 Size Tested 86" x 95"
30/35
30
25
< 0.2
Class LC-PG30 Size Tested 86" x 95"
30/35
30
25
< 0.2
Class LC-PG30 Size Tested 86" x 95"
30/35
31
25
< 0.2
Two-Panel Active** Door††
Single Stationary Single Active**
Class LC-PG30 Size Tested 86" x 95"
30/35
31
25
< 0.2
Two-Panel Stationary
Class LC-PG30 Size Tested 86" x 95"
30/35
31
25
< 0.2
Class LC-PG30 Size Tested 86" x 95"
30/35
31
25
< 0.2
Class LC-PG30 Size Tested 86" x 95"
30/35
30
25
< 0.2
Two-Panel Active** Residential Arch Inswing Entry
Combination Design, Product Performance, Installation & Warranty
Residential Springline Outswing Entry ™
Doors††
Single Stationary Single Active**
Class LC-PG30 Size Tested 86" x 95"
30/35
30
25
< 0.2
Two-Panel Stationary
Class LC-PG30 Size Tested 86" x 95"
30/35
30
25
< 0.2
Class LC-PG30 Size Tested 86" x 95"
30/35
30
25
< 0.2
Class LC-PG30 Size Tested 86" x 95"
30/35
31
25
< 0.2
Two-Panel Active** Residential Arch Outswing Entry
Doors††
Single Stationary Single Active**
Class LC-PG30 Size Tested 86" x 95"
30/35
31
25
< 0.2
Two-Panel Stationary
Class LC-PG30 Size Tested 86" x 95"
30/35
31
25
< 0.2
Class LC-PG30 Size Tested 86" x 95"
30/35
31
25
< 0.2
Class LC-PG30 Size Tested 86" x 95"
30/35
30
25
< 0.2
Two-Panel Active** Residential Rectangular Inswing Entry
Door††
Single Stationary Single Active**
Class LC-PG30 Size Tested 86" x 95"
30/35
30
25
< 0.2
Single Active (latch & deadbolt)
Class LC-PG25 Size Tested 74" x 95"
25/25
30
25
< 0.2
Two-Panel Stationary
Class LC-PG30 Size Tested 86" x 95"
30/35
30
25
< 0.2
Two-Panel Active**
Class LC-PG30 Size Tested 86" x 95"
30/35
30
25
< 0.2
Two-Panel Active (latch & deadbolt)
Class LC-PG25 Size Tested 74" x 95"
25/25
30
25
< 0.2
Single Stationary
Class LC-PG30 Size Tested 86" x 95"
30/35
31
25
< 0.2
Single Active**
Class LC-PG30 Size Tested 86" x 95"
30/35
31
25
< 0.2
Residential Rectangular Outswing Entry Door††
Single Active (latch & deadbolt)
Class LC-PG25 Size Tested 74" x 95"
25/25
31
25
< 0.2
Two-Panel Stationary
Class LC-PG30 Size Tested 86" x 95"
30/35
31
25
< 0.2
Two-Panel Active**
Class LC-PG30 Size Tested 86" x 95"
30/35
31
25
< 0.2
Two-Panel Active (latch & deadbolt)
Class LC-PG25 Size Tested 74" x 95"
25/25
31
25
< 0.2
Residential Inswing Entry Door Sidelights
Class LC-PG30 Size Tested 28" x 95"
30/35
n/a
n/a
< 0.2
Residential Outswing Entry Doors Sidelights
Class LC-PG30 Size Tested 28" x 95"
30/35
n/a
n/a
< 0.2
• "Performance Grade (PG)" ratings may vary from tested performance rating for larger or smaller units of a particular type. • "Sound Transmission Class (STC)" & "Outdoor/Indoor Transmission Class (OITC)" ratings are for individual units based on independent tests and represent entire unit. • This data is accurate as of March 2015. Due to ongoing product changes, updated test results, or new industry standards, this data may change over time. • Where designated, Andersen products are certified and labeled to the requirements of the Hallmark Certification Program. Actual performance may vary based on variations in manufacturing, shipping, installation, environmental conditions and conditions of use. • Contact your Andersen supplier for more information. **Tested with standard multi-point hardware. ††Sound Transmission Class (STC) and Outdoor/Indoor Transmission Class (OITC) for full light panel style.
275
PRODUCT PERFORMANCE Performance Grade, Air Infiltration and Sound Transmission Ratings — Commercial Entry Doors For current performance information please visit andersenwindows.com. ASTM E330-02
Structural Rating (DP)
Sound Transmission Class (STC)
Outdoor/Indoor Transmission Class (OITC)
Air Infiltration CFM/FT 2
Single Stationary
+/- 35 Size Tested 45" x 95"
DP35
27
24
< 0.2
Two-Panel Stationary
+/- 35 Size Tested 74" x 95"
DP35
27
22
< 0.2
Commercial Outswing Entry Door Sidelights††
+/- 35 Size Tested 45" x 95"
DP35
27
24
< 0.2
+/- 35 Size Tested 45" x 95"
DP35
27
24
n/a
Andersen® Product Commercial Rectangular Outswing Entry Door††
Commercial Rectangular Outswing Entry Door †† Single Active (latch & deadbolt) Two-Panel Active (latch & deadbolt)
+/- 35 Size Tested 74" x 95"
DP35
27
22
n/a
Two-Panel Active (panic hardware)
+/- 25 Size Tested 74" x 95"
DP25
27
22
n/a
• "Performance Grade (PG)" ratings may vary from tested performance rating for larger or smaller units of a particular type. • "Sound Transmission Class (STC)" & "Outdoor/Indoor Transmission Class (OITC)" ratings are for individual units based on independent tests and represent entire unit. • This data is accurate as of March 2015. Due to ongoing product changes, updated test results, or new industry standards, this data may change over time. • Where designated, Andersen products are certified and labeled to the requirements of the Hallmark Certification Program. Actual performance may vary based on variations in manufacturing, shipping, installation, environmental conditions and conditions of use. • Contact your Andersen supplier for more information. ††Sound Transmission Class (STC) and Outdoor/Indoor Transmission Class (OITC) for full light panel style.
Performance Grade, Air Infiltration and Sound Transmission Ratings — 200 Series Windows and Patio Doors For current performance information please visit andersenwindows.com.
Andersen® Product
AAMA/WDMA/CSA 101/IS2/A440 Performance Grade (PG)
+/Corresponding Design Pressure (DP)
Sound Transmission Class (STC)
Outdoor/Indoor Transmission Class (OITC)
Air Infiltration CFM/FT 2
Tilt-Wash Windows Double-Hung
Class LC-PG30 Size Tested 39" x 71"
30/30
27
22
< 0.2
Half Circle
Class LC-PG50 Size Tested 75" x 40"
50/50
29
24
< 0.2
Picture
Class LC-PG50 Size Tested 71" x 59"
50/50
29
24
< 0.2
Gliding Windows
Class R-PG20 Size Tested 71" x 59"
20/20
27
22
< 0.2
Narroline® Gliding Patio Doors Single Stationary
Class LC-PG40 Size Tested 50" x 95"
40/40
30
24
< 0.2
Two-Panel (6068)
Class LC-PG35 Size Tested 71" x 79"
35/35
30
24
< 0.2
Two-Panel (60611)
Class LC-PG40 Size Tested 71" x 82"
40/40
30
24
< 0.2
Two-Panel (8080)
Class LC-PG25 Size Tested 95" x 95"
25/25
30
24
< 0.2
Two-Panel (6080)
Class LC-PG30 Size Tested 71" x 95"
30/30
30
24
< 0.2
Four-Panel
Class LC-PG25 Size Tested 189" x 95"
25/25
-
-
< 0.2
Perma-Shield® Gliding Patio Doors Single Stationary
Class LC-PG45 Size Tested 50" x 95"
45/45
30
24
< 0.2
Two-Panel
Class LC-PG25 Size Tested 96" x 95"
25/25
29
23
< 0.2
Perma-Shield® Gliding Patio Doors, PG Upgrade (60611, 6068)
Class LC-PG40 Size Tested 96" x 82"
40/40
29
23
< 0.2
Single-Panel
Class LC-PG30 Size Tested 38" x 95"
30/30
32
27
< 0.2
Two-Panel
Class LC-PG30 Size Tested 71" x 95"
30/30
30
24
< 0.2
Hinged Inswing Patio Doors
• "Performance Grade (PG)" ratings may vary from tested performance rating for larger or smaller units of a particular type. • "Sound Transmission Class (STC)" & "Outdoor/Indoor Transmission Class (OITC)" ratings are for individual units based on independent tests and represent entire unit. • This data is accurate as of March 2015. Due to ongoing product changes, updated test results, or new industry standards, this data may change over time. • Where designated, Andersen products are certified and labeled to the requirements of the Hallmark Certification Program. Actual performance may vary based on variations in manufacturing, shipping, installation, environmental conditions and conditions of use. • Contact your Andersen supplier for more information.
276
TECHNICAL DATA
Center of Glass Performance Data for products with Low-E4® SmartSun™ and Low-E SmartSun™ Glass Fading
Andersen® Product
VTL1
SC 2
SHGC 3
RHG 4
Tuv5
Tdw6
%RH @ Center 7
IGST 8
400 Series Casement/Awning & Tilt-Wash Full-Frame Double-Hung Windows; 200 Series Tilt-Wash & Gliding Windows
66%
0.32
0.28
66
5%
21%
61%
56°F
400 Series Gliding Window, Half Circle, Circle & Oval Windows
66%
0.31
0.27
66
5%
21%
61%
56°F
400 Series Casement/Awning Picture/Transoms, Woodwright® Full-Frame Double-Hung, Picture & Transoms, Woodwright® Insert Double-Hung, Picture & Transoms, Tilt-Wash Full-Frame Picture & Transoms, Tilt-Wash Insert Double-Hung, Picture & Transom Windows; 200 Series Fixed Windows
65%
0.31
0.27
65
5%
21%
61%
56°F
400 Series Elliptical Windows, Frenchwood® Inswing & Outswing Patio Doors, Frenchwood® Patio Door Sidelights, Sidelight Transoms & Transoms
65%
0.31
0.27
66
5%
21%
61%
56°F
400 Series Frenchwood® Gliding Patio Doors; 200 Series Narroline® Gliding, Perma-Shield® Gliding & Hinged Inswing Patio Doors
64%
0.32
0.27
66
5%
21%
61%
56°F
400 Series Flexiframe , Arch & Springline Windows
63%
0.31
0.27
65
4%
20%
61%
56°F
Entry Doors, Folding Doors & 400 Series Complementary Curved Top Patio Doors
65%
0.31
0.27
207
5%
21%
61%
56°F
®
™
Combination Design, Product Performance, Installation & Warranty
For current performance information please visit andersenwindows.com.
Center of Glass Performance Data for products with Low-E4® and Low-E Glass For current performance information please visit andersenwindows.com. Fading
Andersen® Product
VTL1
SC 2
SHGC 3
RHG 4
Tuv5
Tdw6
%RH @ Center 7
IGST 8
400 Series Casement/Awning & Tilt-Wash Full-Frame Double-Hung Windows; 200 Series Tilt-Wash & Gliding Windows
73%
0.48
0.42
100
17%
34%
61%
56°F
400 Series Gliding Window, Half Circle, Circle & Oval Windows
73%
0.48
0.42
99
17%
34%
61%
56°F
400 Series Casement/Awning Picture/Transoms, Woodwright® Full-Frame Double-Hung, Picture & Transoms, Woodwright® Insert Double-Hung, Picture & Transoms, Tilt-Wash Full-Frame Picture & Transoms, Tilt-Wash Insert Double-Hung, Picture & Transom Windows; 200 Series Fixed Windows
72%
0.47
0.41
98
16%
33%
61%
56°F
400 Series Elliptical Windows, Frenchwood® Inswing & Outswing Patio Doors, Frenchwood® Patio Door Sidelights, Sidelight Transoms & Transoms
72%
0.48
0.41
98
16%
33%
61%
56°F
400 Series Frenchwood® Gliding Patio Doors; 200 Series Narroline® Gliding, Perma-Shield® Gliding & Hinged Inswing Patio Doors
71%
0.47
0.41
98
16%
33%
61%
56°F
400 Series Flexiframe®, Arch & Springline™ Windows
70%
0.46
0.40
95
14%
31%
61%
56°F
Entry Doors, Folding Doors & 400 Series Complementary Curved Top Patio Doors
72%
0.48
0.41
310
16%
33%
61%
56°F
Center of Glass Performance Data for products with Low-E4® Sun and Low-E Sun Glass For current performance information please visit andersenwindows.com. Fading
Andersen® Product
VTL1
SC 2
SHGC 3
RHG 4
Tuv5
Tdw6
%RH @ Center 7
IGST 8
400 Series Casement/Awning & Tilt-Wash Full-Frame Double-Hung Windows; 200 Series Tilt-Wash & Gliding Windows
40%
0.30
0.26
62
17%
25%
61%
56°F
400 Series Gliding Window, Half Circle, Circle & Oval Windows
40%
0.29
0.26
62
17%
25%
59%
55°F
400 Series Casement/Awning Picture/Transoms, Woodwright® Full-Frame Double-Hung, Picture & Transoms, Woodwright® Insert Double-Hung, Picture & Transoms, Tilt-Wash Full-Frame Picture & Transoms, Tilt-Wash Insert Double-Hung, Picture & Transom Windows; 200 Series Fixed Windows
40%
0.29
0.25
61
16%
24%
59%
55°F
400 Series Elliptical Windows, Frenchwood® Inswing & Outswing Patio Doors, Frenchwood® Patio Door Sidelights, Sidelight Transoms & Transoms
40%
0.29
0.25
61
16%
24%
59%
55°F
400 Series Frenchwood Gliding Patio Doors; 200 Series Narroline Gliding, Perma-Shield Gliding & Hinged Inswing Patio Doors
39%
0.29
0.25
61
15%
23%
61%
56°F
400 Series Flexiframe®, Arch & Springline™ Windows
37%
0.28
0.24
59
13%
22%
61%
56°F
Entry Doors, Folding Doors & 400 Series Complementary Curved Top Patio Doors
40%
0.29
0.25
193
16%
24%
59%
55°F
®
®
®
• "Low-E4®", "Low-E4® SmartSun™" and "Low-E4® Sun" are Andersen trademarks for "Low-E" glass. • Based on NFRC testing/simulation conditions using Windows 5.2 and NFRC validated spectral data. 0°F outside temperature, 70°F inside temperature and a 15 mph wind. 1) Visible Light Transmittance (VLT) measures how much light comes through the glass. The higher the value, from 0 to 1, the more daylight the glass lets in. Visible Transmittance is measured over the 380 to 760 nanometer portion of the solar spectrum. 2) Shading Coefficient (SC) defines the amount of heat gain through the glass compared to a single lite of clear 1/8" (3) glass. 3) Solar Heat Gain Coefficient (SHGC) defines the fraction of solar radiation admitted through the glass both directly transmitted and absorbed and subsequently released inward. The lower the value, the less heat is transmitted through the glass. 4) Relative Heat Gain (RHG) is the amount of heat gain through a glazing incorporating U-Factor and Solar Heat Gain Coefficient. 5) Transmission Ultra-Violet Energy (Tuv). The transmission of short wave energy in the 300-380 nanometer portion of the solar spectrum. The energy can cause fabric fading. 6) Transmission Damage Function (Tdw). The transmission of UV and visible light energy in the 300-600 nanometer portion of the solar spectrum. The value includes both the UV and visible light energy that can cause fabric fading. This rating has also been referred to as the Krochmann Damage Function. This rating better predicts fading potential than UV transmission alone. The lower the Damage Function rating, the less transmission of short wave energy through the glass that can potentially cause fabric fading. Fabric type is also a key component of fading potential. 7) Percent relative humidity before condensation occurs at the center of glass, taken using center of glass temperature. 8) Inside glass surface temperatures are taken at the center of glass. • This data is accurate as of March 2015. Due to ongoing product changes, updated test results, or new industry standards, this data may change over time. Contact your Andersen supplier for current performance information or upgrade options. • Contact your Andersen supplier or visit andersenwindows.com/nfrc for total unit performance data on windows and patio doors (including units with patterned glass, patterned glass, tempered glass and capillary breather tubes).
277
PRODUCT PERFORMANCE Andersen® NFRC Certified Total Unit Performance – 400 Series
Refer to notes on page 282 for important information on performance data.
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
Andersen® Product
400 Series Woodwright® Full-Frame Transom Windows AND-N-68
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-67
Low-E4® Sun
400 Series Woodwright® Full-Frame Picture Windows
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-66
Low-E4® Sun
400 Series Woodwright® Full-Frame Double-Hung Windows
Low-E4® w/HeatLock™
Low-E4®
Glass Type
Low-E4® Sun
0.54 0.49 0.49 0.49 0.52 0.47 0.47 0.47 0.30 0.27 0.27 0.27 0.48 0.44 0.44 0.44 0.47 0.43 0.43 0.43 0.47 0.42 0.42 0.42 0.46 0.41 0.41 0.41 0.26 0.23 0.23 0.23 0.42 0.38 0.38 0.38 0.41 0.37 0.37 0.37 0.53 0.48 0.48 0.48 0.51 0.47 0.47 0.47 0.29 0.27 0.27 0.27 0.47 0.43 0.43 0.43 0.46 0.42 0.42 0.42 0.59 0.53 0.53 0.53 0.58 0.52 0.52 0.52 0.32 0.29 0.29 0.29 0.53 0.48 0.48 0.48 0.52 0.47 0.47 0.47
Low-E4® SmartSun™
VLT 3
0.31 0.29 0.29 0.29 0.31 0.28 0.28 0.28 0.20 0.18 0.18 0.18 0.21 0.19 0.19 0.19 0.21 0.19 0.19 0.19 0.28 0.25 0.25 0.25 0.27 0.25 0.25 0.25 0.17 0.16 0.16 0.16 0.18 0.17 0.17 0.17 0.18 0.17 0.17 0.17 0.31 0.28 0.28 0.28 0.30 0.28 0.28 0.28 0.19 0.18 0.18 0.18 0.21 0.19 0.19 0.19 0.20 0.19 0.19 0.19 0.34 0.31 0.31 0.31 0.33 0.30 0.30 0.30 0.21 0.19 0.19 0.19 0.23 0.21 0.21 0.21 0.22 0.20 0.20 0.20
Low-E4® SmartSun™ w/HeatLock™
SHGC2
0.29 0.29 0.30 0.29 0.25 0.25 0.26 0.26 0.29 0.29 0.30 0.30 0.28 0.28 0.29 0.29 0.24 0.24 0.25 0.26 0.31 0.31 0.31 0.31 0.27 0.27 0.27 0.29 0.31 0.31 0.31 0.32 0.30 0.30 0.30 0.31 0.27 0.27 0.27 0.28 0.29 0.29 0.29 0.29 0.25 0.25 0.26 0.26 0.29 0.29 0.30 0.30 0.28 0.28 0.29 0.29 0.25 0.25 0.25 0.26 0.27 0.27 0.27 0.28 0.22 0.22 0.22 0.24 0.27 0.27 0.27 0.29 0.26 0.26 0.26 0.28 0.22 0.22 0.22 0.24
Low-E4®
U-Factor1
400 Series Woodwright® Insert Double-Hung Windows AND-N-74
Low-E4® w/HeatLock™
Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles
Low-E4® Sun
AND-N-54
Low-E4® Sun
400 Series Casement/Awning Picture/Transom Windows
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-2
Low-E4® Sun
400 Series Awning Windows
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-107
Low-E4® Sun
400 Series Complementary Casement Windows
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-1
Low-E4® Sun
400 Series Casement Windows
Low-E4® w/HeatLock™
Low-E4®
Glass Type
Low-E4® SmartSun™
Andersen® Product
Low-E4® SmartSun™ w/HeatLock™
For current performance information please visit andersenwindows.com.
Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles
• This data is accurate as of April, 2015. Due to ongoing product changes, updated test results, or new industry standards or requirements, this data may change over time. Ratings are for sizes specified by NFRC for testing and certification. Ratings may vary depending on use of tempered glass, different grille options, glass for high altitudes, etc.
278
U-Factor1
SHGC2
VLT 3
0.30 0.30 0.31 0.31 0.26 0.26 0.27 0.28 0.30 0.30 0.31 0.31 0.29 0.29 0.30 0.30 0.26 0.26 0.27 0.27 0.28 0.28 0.29 0.29 0.24 0.24 0.25 0.26 0.28 0.28 0.29 0.29 0.27 0.27 0.28 0.28 0.23 0.23 0.24 0.25 0.28 0.28 0.28 0.29 0.23 0.23 0.23 0.25 0.28 0.28 0.28 0.29 0.27 0.27 0.27 0.28 0.23 0.23 0.23 0.25 0.30 0.30 0.31 0.31 0.27 0.27 0.27 0.28 0.31 0.31 0.32 0.32 0.30 0.30 0.31 0.31 0.26 0.26 0.27 0.28
0.30 0.27 0.27 0.27 0.30 0.27 0.27 0.27 0.19 0.17 0.17 0.17 0.21 0.19 0.19 0.19 0.20 0.18 0.18 0.18 0.31 0.28 0.28 0.29 0.30 0.27 0.27 0.27 0.20 0.18 0.17 0.18 0.21 0.19 0.19 0.19 0.21 0.19 0.19 0.19 0.33 0.30 0.30 0.30 0.32 0.29 0.29 0.29 0.20 0.18 0.18 0.18 0.22 0.20 0.20 0.20 0.22 0.20 0.20 0.20 0.31 0.28 0.28 0.28 0.30 0.27 0.27 0.27 0.19 0.17 0.17 0.17 0.21 0.19 0.19 0.19 0.20 0.18 0.18 0.18
0.52 0.46 0.46 0.46 0.51 0.45 0.45 0.45 0.28 0.25 0.25 0.25 0.47 0.42 0.42 0.42 0.46 0.41 0.41 0.41 0.53 0.48 0.48 0.48 0.52 0.47 0.47 0.47 0.29 0.26 0.26 0.26 0.48 0.43 0.43 0.43 0.47 0.42 0.42 0.42 0.57 0.51 0.51 0.51 0.56 0.50 0.50 0.50 0.31 0.28 0.28 0.28 0.51 0.46 0.46 0.46 0.50 0.45 0.45 0.45 0.53 0.47 0.47 0.47 0.52 0.46 0.46 0.46 0.29 0.26 0.26 0.26 0.48 0.42 0.42 0.42 0.46 0.41 0.41 0.41
continued on next page
TECHNICAL DATA
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-24
Low-E4® Sun
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-76
Low-E4® Sun
400 Series Tilt-Wash Full-Frame Transom Windows
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-27
Low-E4® Sun
400 Series Tilt-Wash Full-Frame Picture Windows
Low-E4® w/HeatLock™
Low-E4®
Glass Type
400 Series Tilt-Wash Conversion Kit AND-N-101
400 Series Tilt-Wash Insert Double-Hung Windows AND-N-132
Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles
• This data is accurate as of April, 2015. Due to ongoing product changes, updated test results, or new industry standards or requirements, this data may change over time. Ratings are for sizes specified by NFRC for testing and certification. Ratings may vary depending on use of tempered glass, different grille options, glass for high altitudes, etc.
U-Factor1
SHGC2
VLT 3
0.29 0.29 0.29 0.31 0.25 0.25 0.25 0.27 0.30 0.30 0.30 0.31 0.29 0.29 0.29 0.30 0.25 0.25 0.25 0.27 0.27 0.27 0.27 0.28 0.23 0.23 0.23 0.25 0.27 0.27 0.27 0.29 0.26 0.26 0.26 0.28 0.22 0.22 0.22 0.25 0.30 0.30 0.31 0.31 0.26 0.26 0.26 0.26 0.31 0.31 0.32 0.32 0.30 0.30 0.31 0.31 0.26 0.26 0.26 0.26 0.31 0.31 0.32 0.32 0.27 0.27 0.28 0.29 0.31 0.31 0.33 0.32 0.30 0.30 0.32 0.31 0.27 0.27 0.27 0.28
0.33 0.30 0.30 0.30 0.32 0.29 0.29 0.29 0.20 0.18 0.18 0.18 0.22 0.20 0.20 0.20 0.21 0.19 0.19 0.19 0.32 0.29 0.29 0.29 0.31 0.28 0.28 0.28 0.19 0.18 0.18 0.18 0.21 0.19 0.19 0.19 0.21 0.19 0.19 0.19 0.31 0.28 0.28 0.28 0.30 0.27 0.27 0.27 0.19 0.17 0.17 0.17 0.21 0.19 0.19 0.19 0.20 0.18 0.18 0.18 0.31 0.28 0.28 0.28 0.31 0.28 0.28 0.28 0.19 0.18 0.18 0.18 0.21 0.19 0.19 0.19 0.20 0.19 0.19 0.19
0.56 0.50 0.50 0.50 0.55 0.49 0.49 0.49 0.31 0.27 0.27 0.27 0.51 0.45 0.45 0.45 0.50 0.44 0.44 0.44 0.55 0.49 0.49 0.49 0.54 0.48 0.48 0.48 0.31 0.27 0.27 0.27 0.49 0.44 0.44 0.44 0.48 0.43 0.43 0.43 0.53 0.47 0.47 0.47 0.52 0.46 0.46 0.46 0.30 0.26 0.26 0.26 0.48 0.43 0.43 0.43 0.47 0.42 0.42 0.42 0.54 0.48 0.48 0.48 0.52 0.46 0.46 0.46 0.30 0.26 0.26 0.26 0.48 0.43 0.43 0.43 0.47 0.42 0.42 0.42
Combination Design, Product Performance, Installation & Warranty
Andersen® Product
Low-E4® w/HeatLock™
0.54 0.48 0.48 0.48 0.52 0.47 0.47 0.29 0.26 0.26 0.26 0.48 0.43 0.43 0.43 0.47 0.42 0.42 0.56 0.50 0.50 0.50 0.55 0.49 0.49 0.31 0.27 0.27 0.27 0.50 0.45 0.45 0.45 0.49 0.44 0.44 0.52 0.46 0.46 0.46 0.51 0.45 0.45 0.45 0.29 0.26 0.26 0.26 0.47 0.42 0.42 0.42 0.46 0.41 0.41 0.41 0.53 0.47 0.47 0.42 0.52 0.46 0.46 0.46 0.29 0.26 0.26 0.26 0.48 0.42 0.42 0.42 0.46 0.41 0.41 0.41
Low-E4® Sun
VLT 3
0.32 0.29 0.28 0.29 0.30 0.27 0.27 0.20 0.18 0.18 0.18 0.22 0.20 0.20 0.19 0.21 0.19 0.19 0.33 0.30 0.30 0.30 0.32 0.29 0.29 0.20 0.18 0.18 0.18 0.22 0.20 0.20 0.20 0.21 0.19 0.19 0.30 0.27 0.27 0.27 0.30 0.27 0.27 0.27 0.19 0.17 0.17 0.17 0.20 0.18 0.18 0.18 0.20 0.18 0.18 0.18 0.31 0.28 0.28 0.28 0.30 0.27 0.27 0.27 0.19 0.17 0.17 0.17 0.21 0.19 0.19 0.19 0.20 0.18 0.18 0.18
Low-E4® SmartSun™
SHGC2
0.29 0.29 0.30 0.30 0.25 0.26 0.27 0.29 0.29 0.30 0.30 0.28 0.28 0.29 0.30 0.24 0.25 0.26 0.29 0.29 0.29 0.30 0.24 0.24 0.26 0.29 0.29 0.29 0.31 0.28 0.28 0.28 0.30 0.24 0.24 0.26 0.28 0.28 0.29 0.29 0.24 0.24 0.25 0.26 0.28 0.28 0.29 0.29 0.27 0.27 0.28 0.29 0.24 0.24 0.25 0.26 0.30 0.30 0.30 0.31 0.27 0.27 0.27 0.28 0.31 0.30 0.30 0.31 0.30 0.29 0.29 0.31 0.26 0.26 0.27 0.28
Low-E4® SmartSun™ w/HeatLock™
U-Factor1
Low-E4®
Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles
Low-E4® w/HeatLock™
400 Series Tilt-Wash Full-Frame Double-Hung Windows
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-111
Low-E4® Sun
400 Series Woodwright® Curved Top Double-Hung Windows
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-78
Low-E4® Sun
400 Series Woodwright® Insert Transom Windows
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-77
Low-E4® Sun
400 Series Woodwright® Insert Picture Windows
Low-E4® w/HeatLock™
Low-E4®
Glass Type
Low-E4® Sun
Andersen® Product
Refer to notes on page 282 for important information on performance data.
Low-E4® SmartSun™
(continued)
For current performance information please visit andersenwindows.com.
Low-E4® SmartSun™ w/HeatLock™
Andersen® NFRC Certified Total Unit Performance – 400 Series
continued on next page
279
PRODUCT PERFORMANCE
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
Low-E4® Sun
Andersen® Product
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
Low-E4® Sun
400 Series Circle & Oval Windows AND-N-148
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
Casement AND-N-147
Low-E4® Sun
400 Series Half Circle Windows
Low-E4® w/HeatLock™
Low-E4®
Glass Type
400 Series Arch Windows AND-N-18
Low-E4® w/HeatLock™
0.54 0.48 0.48 0.48 0.52 0.47 0.47 0.29 0.26 0.26 0.26 0.48 0.43 0.43 0.43 0.47 0.42 0.42 0.56 0.50 0.50 0.50 0.55 0.49 0.49 0.31 0.27 0.27 0.27 0.50 0.45 0.45 0.45 0.49 0.44 0.44 0.49 0.43 0.43 0.43 0.48 0.42 0.42 0.42 0.27 0.24 0.24 0.24 0.44 0.39 0.39 0.39 0.43 0.38 0.38 0.38 0.59 0.53 0.53 0.53 0.58 0.52 0.52 0.52 0.33 0.29 0.29 0.29 0.53 0.48 0.48 0.48 0.52 0.46 0.46 0.46
Low-E4® Sun
VLT 3
0.32 0.29 0.28 0.29 0.30 0.27 0.27 0.20 0.18 0.18 0.18 0.22 0.20 0.20 0.19 0.21 0.19 0.19 0.33 0.30 0.30 0.30 0.32 0.29 0.29 0.20 0.18 0.18 0.18 0.22 0.20 0.20 0.20 0.21 0.19 0.19 0.29 0.26 0.26 0.26 0.28 0.25 0.25 0.25 0.18 0.16 0.16 0.16 0.19 0.17 0.17 0.17 0.19 0.17 0.17 0.17 0.34 0.31 0.31 0.31 0.34 0.30 0.30 0.30 0.21 0.19 0.19 0.19 0.23 0.20 0.20 0.20 0.22 0.20 0.20 0.20
Low-E4® SmartSun™
SHGC2
0.29 0.29 0.30 0.30 0.25 0.26 0.27 0.29 0.29 0.30 0.31 0.28 0.28 0.29 0.30 0.24 0.25 0.26 0.29 0.29 0.29 0.30 0.24 0.24 0.27 0.29 0.29 0.29 0.31 0.28 0.28 0.28 0.30 0.24 0.24 0.26 0.30 0.30 0.30 0.31 0.26 0.26 0.26 0.28 0.30 0.30 0.30 0.31 0.29 0.29 0.29 0.31 0.26 0.26 0.26 0.28 0.27 0.27 0.29 0.29 0.23 0.23 0.23 0.25 0.28 0.28 0.29 0.29 0.26 0.26 0.28 0.28 0.22 0.22 0.22 0.25
Low-E4® SmartSun™ w/HeatLock™
U-Factor1
Low-E4®
Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles
400 Series Springline™ Windows AND-N-25
Low-E4® w/HeatLock™
400 Series Elliptical Windows AND-N-16
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
Low-E4® Sun
400 Series Gliding Windows AND-N-19
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-134
Low-E4® Sun
400 Series Tilt-Wash Insert Transom Windows
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-133
Low-E4® Sun
400 Series Tilt-Wash Insert Picture Windows
Low-E4® w/HeatLock™
Low-E4®
Glass Type
Low-E4® Sun
Andersen® Product
Refer to notes on page 282 for important information on performance data.
Low-E4® SmartSun™
(continued)
For current performance information please visit andersenwindows.com.
Low-E4® SmartSun™ w/HeatLock™
Andersen® NFRC Certified Total Unit Performance – 400 Series
Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles
• This data is accurate as of April, 2015. Due to ongoing product changes, updated test results, or new industry standards or requirements, this data may change over time. Ratings are for sizes specified by NFRC for testing and certification. Ratings may vary depending on use of tempered glass, different grille options, glass for high altitudes, etc.
280
U-Factor1
SHGC2
VLT 3
0.27 0.27 0.27 0.28 0.22 0.22 0.22 0.25 0.27 0.27 0.27 0.29 0.26 0.26 0.26 0.28 0.22 0.22 0.22 0.24 0.27 0.27 0.27 0.28 0.23 0.23 0.23 0.25 0.27 0.27 0.27 0.29 0.26 0.26 0.26 0.28 0.22 0.22 0.22 0.24 0.28 0.28 0.28 0.29 0.23 0.23 0.23 0.25 0.28 0.28 0.28 0.29 0.27 0.27 0.27 0.28 0.23 0.23 0.23 0.25 0.30 0.30 0.30 0.32 0.26 0.26 0.26 0.28 0.31 0.31 0.31 0.32 0.30 0.30 0.30 0.31 0.25 0.25 0.25 0.28
0.35 0.32 0.32 0.32 0.34 0.31 0.31 0.31 0.21 0.19 0.19 0.19 0.23 0.21 0.21 0.21 0.22 0.20 0.20 0.20 0.35 0.32 0.32 0.32 0.34 0.31 0.31 0.31 0.21 0.19 0.19 0.19 0.23 0.21 0.21 0.21 0.22 0.20 0.20 0.20 0.33 0.30 0.30 0.30 0.32 0.29 0.29 0.29 0.20 0.18 0.18 0.18 0.23 0.21 0.21 0.21 0.22 0.20 0.20 0.20 0.33 0.30 0.30 0.30 0.32 0.29 0.29 0.29 0.20 0.18 0.18 0.18 0.23 0.21 0.21 0.21 0.22 0.20 0.20 0.20
0.60 0.53 0.53 0.53 0.58 0.52 0.52 0.52 0.33 0.30 0.30 0.30 0.54 0.48 0.48 0.48 0.53 0.47 0.47 0.47 0.60 0.53 0.53 0.53 0.58 0.52 0.52 0.52 0.33 0.30 0.30 0.30 0.54 0.48 0.48 0.48 0.53 0.47 0.47 0.47 0.58 0.52 0.52 0.52 0.56 0.50 0.50 0.50 0.31 0.28 0.28 0.28 0.52 0.46 0.46 0.46 0.51 0.45 0.45 0.45 0.57 0.51 0.51 0.51 0.56 0.50 0.50 0.50 0.31 0.27 0.27 0.27 0.51 0.46 0.46 0.46 0.50 0.45 0.45 0.45
continued on next page
TECHNICAL DATA
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
TwPanel AND-N-6
Low-E4® Sun
400 Series Frenchwood® Patio Door Sidelights AND-N-64
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-55
Low-E4® Sun
400 Series Frenchwood® Hinged Outswing Patio Doors
400 Series Frenchwood® Patio Door Transoms AND-N-65
Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles
• This data is accurate as of April, 2015. Due to ongoing product changes, updated test results, or new industry standards or requirements, this data may change over time. Ratings are for sizes specified by NFRC for testing and certification. Ratings may vary depending on use of tempered glass, different grille options, glass for high altitudes, etc.
U-Factor1
SHGC2
VLT 3
0.30 0.30 0.32 0.31 0.27 0.27 0.27 0.29 0.30 0.30 0.32 0.32 0.30 0.30 0.31 0.31 0.27 0.27 0.27 0.29 0.30 0.30 0.32 0.31 0.27 0.27 0.27 0.29 0.30 0.30 0.32 0.32 0.30 0.30 0.31 0.31 0.27 0.27 0.27 0.29 0.31 0.31 0.31 0.32 0.27 0.27 0.27 0.29 0.31 0.31 0.31 0.32 0.30 0.30 0.31 0.31 0.27 0.27 0.27 0.28 0.29 0.29 0.30 0.30 0.27 0.27 0.27 0.28 0.30 0.30 0.30 0.30 0.29 0.29 0.30 0.30 0.26 0.26 0.26 0.28
0.24 0.21 0.21 0.21 0.23 0.20 0.20 0.20 0.15 0.13 0.13 0.13 0.16 0.14 0.14 0.14 0.16 0.14 0.14 0.14 0.24 0.21 0.21 0.21 0.24 0.21 0.21 0.21 0.15 0.13 0.13 0.13 0.16 0.14 0.15 0.15 0.16 0.14 0.14 0.14 0.22 0.20 0.20 0.20 0.22 0.19 0.19 0.19 0.14 0.13 0.13 0.13 0.15 0.14 0.14 0.14 0.15 0.13 0.13 0.13 0.24 0.21 0.21 0.21 0.23 0.21 0.21 0.21 0.15 0.13 0.13 0.13 0.16 0.14 0.14 0.14 0.15 0.14 0.14 0.14
0.40 0.34 0.34 0.34 0.39 0.34 0.34 0.34 0.22 0.19 0.19 0.19 0.36 0.31 0.31 0.31 0.36 0.30 0.30 0.30 0.40 0.34 0.34 0.34 0.39 0.34 0.34 0.34 0.22 0.19 0.19 0.19 0.36 0.31 0.31 0.31 0.36 0.30 0.30 0.30 0.36 0.32 0.32 0.32 0.36 0.31 0.31 0.31 0.20 0.18 0.18 0.18 0.33 0.29 0.29 0.29 0.32 0.28 0.28 0.28 0.39 0.35 0.35 0.35 0.38 0.34 0.34 0.34 0.22 0.19 0.19 0.19 0.35 0.31 0.31 0.31 0.34 0.30 0.30 0.30
Combination Design, Product Performance, Installation & Warranty
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-10
Low-E4® Sun
400 Series Frenchwood® Hinged Inswing Patio Doors
Low-E4® w/HeatLock™
Low-E4®
Glass Type
Low-E4® Sun
0.58 0.52 0.52 0.52 0.56 0.50 0.50 0.50 0.31 0.28 0.28 0.28 0.52 0.46 0.46 0.46 0.51 0.45 0.45 0.45 0.61 0.55 0.55 0.55 0.60 0.54 0.54 0.54 0.34 0.30 0.30 0.30 0.55 0.49 0.49 0.49 0.54 0.48 0.48 0.48 0.64 0.57 0.57 0.57 0.62 0.56 0.56 0.56 0.35 0.32 0.32 0.32 0.57 0.51 0.51 0.51 0.56 0.50 0.50 0.50 0.44 0.38 0.38 0.38 0.43 0.37 0.37 0.37 0.24 0.21 0.21 0.21 0.39 0.34 0.34 0.34 0.39 0.33 0.33 0.33
Andersen® Product
Low-E4® SmartSun™
0.33 0.30 0.30 0.30 0.32 0.29 0.29 0.29 0.20 0.18 0.18 0.18 0.23 0.21 0.21 0.21 0.22 0.20 0.20 0.20 0.35 0.32 0.32 0.32 0.35 0.31 0.31 0.31 0.22 0.20 0.20 0.20 0.23 0.21 0.21 0.21 0.23 0.21 0.21 0.21 0.37 0.33 0.33 0.33 0.36 0.33 0.33 0.33 0.22 0.20 0.20 0.20 0.24 0.22 0.22 0.22 0.24 0.22 0.22 0.22 0.26 0.23 0.23 0.23 0.25 0.22 0.22 0.22 0.16 0.14 0.14 0.14 0.18 0.16 0.16 0.16 0.17 0.15 0.15 0.15
VLT 3
Low-E4® SmartSun™ w/HeatLock™
0.27 0.27 0.27 0.28 0.22 0.22 0.22 0.25 0.27 0.27 0.27 0.28 0.26 0.26 0.26 0.27 0.22 0.22 0.22 0.24 0.29 0.29 0.29 0.30 0.24 0.24 0.24 0.27 0.29 0.29 0.29 0.30 0.28 0.28 0.28 0.29 0.24 0.24 0.24 0.27 0.28 0.28 0.28 0.29 0.23 0.23 0.23 0.26 0.28 0.28 0.28 0.29 0.27 0.27 0.27 0.28 0.23 0.23 0.23 0.26 0.30 0.30 0.32 0.32 0.27 0.27 0.27 0.29 0.31 0.31 0.32 0.32 0.30 0.30 0.31 0.31 0.26 0.26 0.26 0.29
SHGC2
Low-E4®
Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles
U-Factor1
Low-E4® w/HeatLock™
400 Series Frenchwood® Gliding Patio Doors
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
Low-E4® Sun
400 Series Complementary Specialty Windows 400 Series Double-Hung Windows & Patio Doors AND-N-105
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
Low-E4® Sun
400 Series Complementary Specialty Windows 400 Series Casement, Awning, Picture Windows AND-N-105
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-17
Low-E4® Sun
400 Series Flexiframe® Windows
Low-E4® w/HeatLock™
Low-E4®
Glass Type
Low-E4® Sun
Andersen® Product
Refer to notes on page 282 for important information on performance data.
Low-E4® SmartSun™
(continued)
For current performance information please visit andersenwindows.com.
Low-E4® SmartSun™ w/HeatLock™
Andersen® NFRC Certified Total Unit Performance – 400 Series
continued on next page
281
PRODUCT PERFORMANCE
Low-E4® Low-E4® w/HeatLock™ Low-E4® SmartSun™
Low-E4® Sun
Residential Inswing Entry Doors* Arch & Rectangular AND-N-135
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-129
Low-E4® Sun
Folding Outswing Doors
Residential/Commercial Inswing Entry Door Transoms Sash-Set AND-N-145
Residential Inswing Entry Door Sidelights* Arch & Rectangular AND-N-136
Low-E4® SmartSun™ w/HeatLock™
• "Low-E4® SmartSun™", "Low-E4®" and "Low-E4® Sun" are Andersen trademarks for "Low-E" glass. 1) U-Factor defines the amount of heat loss through the total unit in BTU/hr/ft 2.°F. The lower the value, the less heat is lost through the entire product. Window values represent non-tempered glass. Use of tempered glass can increase U-Factor ratings. See andersenwindows.com/nfrc for specific performance values. Door values represent tempered glass. 2) Solar Heat Gain Coefficient (SHGC) defines the fraction of solar radiation admitted through the glass both directly transmitted and absorbed and subsequently released inward. The lower the value, the less heat is transmitted through the product. 3) Visible Light Transmittance (VLT) measures how much light comes through a product (glass and frame). The higher the value, from 0 to 1, the more daylight the product lets in over the product’s total unit area. Visible Light Transmittance is measured over the 380 to 760 nanometer portion of the solar spectrum. • NFRC ratings are based on modeling by a third party agency as validated by an independent test lab in compliance with NFRC program and procedural requirements. • This data is accurate as of April, 2015. Due to ongoing product changes, updated test results, or new industry standards or requirements, this data may change over time. Ratings are for sizes specified by NFRC for testing and certification. Ratings may vary depending on use of tempered glass, different grille options, glass for high altitudes, etc.
Glass Type
Low-E4® SmartSun™ w/HeatLock™
0.41 0.30 0.35 0.30 0.40 0.29 0.34 0.29 0.23 0.17 0.20 0.17 0.37 0.27 0.32 0.27 0.36 0.26 0.31 0.26 0.41 0.30 0.35 0.30 0.40 0.29 0.35 0.29 0.23 0.17 0.20 0.17 0.37 0.32 0.32 0.32 0.36 0.31 0.31 0.31 0.38 0.34 0.30 0.37 0.33 0.29 0.21 0.19 0.17 0.34 0.30 0.27 0.34 0.30 0.26
Low-E4®
0.24 0.18 0.21 0.18 0.24 0.18 0.21 0.18 0.15 0.12 0.13 0.12 0.16 0.12 0.14 0.12 0.16 0.12 0.14 0.12 0.25 0.19 0.22 0.19 0.24 0.18 0.21 0.18 0.16 0.12 0.14 0.12 0.17 0.15 0.15 0.15 0.16 0.15 0.15 0.15 0.23 0.21 0.18 0.22 0.20 0.18 0.14 0.13 0.12 0.15 0.14 0.13 0.15 0.14 0.12
Low-E4® w/HeatLock™
0.31 0.31 0.32 0.32 0.28 0.28 0.29 0.30 0.31 0.31 0.33 0.33 0.31 0.31 0.32 0.32 0.28 0.28 0.29 0.30 0.32 0.32 0.33 0.33 0.29 0.29 0.30 0.31 0.32 0.32 0.33 0.33 0.31 0.31 0.33 0.33 0.28 0.28 0.29 0.31 0.31 0.31 0.32 0.28 0.28 0.30 0.32 0.32 0.33 0.31 0.31 0.32 0.28 0.28 0.30
Andersen® Product
Low-E4® Sun
VLT 3
Low-E4® SmartSun™
SHGC2
Low-E4® SmartSun™ w/HeatLock™
Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles
For current performance information please visit andersenwindows.com.
U-Factor1
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-131
Low-E4® Sun
400 Series Complementary Arch Sidelights
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-127
Low-E4® Sun
400 Series Complementary Springline™ & Arch Outswing Patio Doors
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-127
Low-E4® Sun
400 Series Complementary Springline™ & Arch Inswing Patio Doors
Low-E4® w/HeatLock™
Low-E4®
Glass Type
Andersen® NFRC Certified Total Unit Performance – Folding & Entry Doors
Low-E4® w/HeatLock™
Andersen® Product
(continued)
Low-E4® Sun
For current performance information please visit andersenwindows.com.
Low-E4® SmartSun™
Andersen® NFRC Certified Total Unit Performance – 400 Series
Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles
U-Factor1
SHGC2
VLT 3
0.35 0.35 0.35 0.36 0.32 0.32 0.32 0.34 0.35 0.35 0.35 0.37 0.35 0.35 0.35 0.36 0.31 0.31 0.31 0.34 0.32 0.32 0.33 0.33 0.32 0.32 0.34 0.34 0.32 0.32 0.33 0.33 0.31 0.31 0.30 0.32 0.31 0.31 0.32 0.32 0.30 0.30 0.31 0.31 0.33 0.33 0.34 0.34 0.34 0.34 0.34 0.34 0.33 0.33 0.34 0.34 -
0.25 0.19 0.22 0.19 0.24 0.18 0.21 0.18 0.16 0.12 0.14 0.12 0.17 0.13 0.15 0.13 0.16 0.13 0.14 0.13 0.22 0.16 0.19 0.16 0.14 0.11 0.12 0.11 0.15 0.11 0.13 0.11 0.27 0.25 0.24 0.25 0.17 0.15 0.15 0.15 0.18 0.16 0.16 0.16 0.19 0.15 0.17 0.15 0.12 0.10 0.11 0.10 0.13 0.10 0.12 0.10 -
0.42 0.30 0.35 0.30 0.41 0.29 0.35 0.29 0.23 0.17 0.20 0.17 0.37 0.27 0.32 0.27 0.36 0.26 0.31 0.26 0.37 0.26 0.31 0.26 0.20 0.14 0.17 0.14 0.33 0.23 0.28 0.23 0.47 0.41 0.41 0.41 0.26 0.23 0.23 0.23 0.42 0.37 0.37 0.37 0.31 0.24 0.27 0.24 0.17 0.13 0.15 0.13 0.28 0.21 0.25 0.21 -
continued on next page
282
TECHNICAL DATA
Low-E4® Sun Low-E4® SmartSun™ Low-E4® SmartSun™ w/HeatLock™
Commercial Outswing Entry Doors* Rectangular AND-N-139
Low-E4® SmartSun™
Rectangular AND-N-144
Low-E4® Sun
Commercial Outswing Entry Door Sidelights*
Low-E4® w/HeatLock™
Low-E4®
Glass Type Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles
U-Factor1
SHGC2
VLT 3
0.35 0.35 0.36 0.36 0.35 0.35 0.36 0.36 0.34 0.34 0.35 0.35 -
0.19 0.15 0.16 0.15 0.12 0.10 0.11 0.10 0.13 0.10 0.11 0.10 -
0.30 0.22 0.26 0.22 0.17 0.12 0.14 0.12 0.27 0.20 0.23 0.20 -
• "Low-E4® SmartSun™", "Low-E4®" and "Low-E4® Sun" are Andersen trademarks for "Low-E" glass. 1) U-Factor defines the amount of heat loss through the total unit in BTU/hr/ft 2.°F. The lower the value, the less heat is lost through the entire product. Window values represent non-tempered glass. Use of tempered glass can increase U-Factor ratings. See andersenwindows.com/nfrc for specific performance values. Door values represent tempered glass. 2) Solar Heat Gain Coefficient (SHGC) defines the fraction of solar radiation admitted through the glass both directly transmitted and absorbed and subsequently released inward. The lower the value, the less heat is transmitted through the product. 3) Visible Light Transmittance (VLT) measures how much light comes through a product (glass and frame). The higher the value, from 0 to 1, the more daylight the product lets in over the product’s total unit area. Visible Light Transmittance is measured over the 380 to 760 nanometer portion of the solar spectrum. • NFRC ratings are based on modeling by a third party agency as validated by an independent test lab in compliance with NFRC program and procedural requirements. • This data is accurate as of April, 2015. Due to ongoing product changes, updated test results, or new industry standards or requirements, this data may change over time. Ratings are for sizes specified by NFRC for testing and certification. Ratings may vary depending on use of tempered glass, different grille options, glass for high altitudes, etc.
Andersen® NFRC Certified Total Unit Performance – 200 Series For current performance information please visit andersenwindows.com. Andersen® Product
Glass Type
200 Series Tilt-Wash Double-Hung Windows AND-N-59
200 Series Gliding Windows AND-N-63
Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles
U-Factor1
SHGC2
VLT3
0.30 0.29 0.30 0.31 0.26 0.26 0.26 0.26 0.30 0.29 0.30 0.31 0.26 0.26 0.26 0.26 0.30 0.30 0.29 0.31 0.26 0.26 0.27 0.28 0.29 0.29 0.29 0.30 0.26 0.26 0.27 0.28
0.32 0.29 0.29 0.29 0.31 0.28 0.28 0.28 0.21 0.19 0.19 0.19 0.21 0.19 0.19 0.19 0.32 0.29 0.29 0.29 0.31 0.28 0.28 0.28 0.21 0.19 0.19 0.19 0.21 0.19 0.19 0.19
0.54 0.48 0.48 0.48 0.53 0.47 0.47 0.47 0.49 0.43 0.43 0.43 0.48 0.42 0.42 0.42 0.54 0.48 0.48 0.48 0.53 0.47 0.47 0.47 0.49 0.43 0.43 0.43 0.47 0.42 0.42 0.42
continued on next page
283
Combination Design, Product Performance, Installation & Warranty
Andersen® Product
Low-E4® SmartSun™ w/HeatLock™
0.36 0.26 0.31 0.26 0.20 0.14 0.17 0.14 0.33 0.23 0.28 0.23 0.49 0.43 0.43 0.43 0.48 0.42 0.42 0.42 0.26 0.23 0.24 0.23 0.44 0.39 0.39 0.39 0.43 0.38 0.38 0.38 0.31 0.24 0.27 0.24 0.17 0.13 0.15 0.13 0.28 0.21 0.25 0.21 0.35 0.24 0.29 0.24 0.19 0.14 0.16 0.14 0.31 0.22 0.26 0.22 -
Low-E
VLT 3
0.22 0.17 0.19 0.17 0.14 0.11 0.12 0.11 0.15 0.12 0.13 0.12 0.29 0.26 0.26 0.26 0.28 0.25 0.25 0.25 0.17 0.15 0.16 0.15 0.19 0.17 0.17 0.17 0.19 0.17 0.17 0.18 0.19 0.15 0.17 0.15 0.12 0.10 0.11 0.10 0.13 0.11 0.12 0.11 0.21 0.16 0.18 0.16 0.13 0.10 0.12 0.10 0.15 0.11 0.13 0.11 -
Low-E w/HeatLock™
SHGC2
0.33 0.33 0.34 0.34 0.33 0.33 0.34 0.34 0.32 0.32 0.34 0.34 0.31 0.31 0.31 0.32 0.28 0.28 0.28 0.30 0.29 0.29 0.31 0.30 0.31 0.31 0.31 0.32 0.27 0.27 0.27 0.29 0.34 0.34 0.35 0.35 0.34 0.34 0.35 0.35 0.33 0.33 0.34 0.34 0.33 0.33 0.35 0.34 0.34 0.34 0.35 0.35 0.33 0.33 0.34 0.34 -
Low-E SmartSun™
U-Factor1
Low-E SmartSun™ w/HeatLock™
Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles
Low-E
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
Arch & Rectangular AND-N-136
Low-E4® Sun
Residential Outswing Entry Door Sidelights*
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
Sash-Set AND-N-130
Low-E4® Sun
Residential/Commercial Outswing Entry Door Transoms
Low-E4® w/HeatLock™
Low-E4®
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
Arch & Rectangular AND-N-135
Low-E4® Sun
Residential Outswing Entry Doors*
Low-E4® w/HeatLock™
Low-E4®
Glass Type
Low-E w/HeatLock™
Andersen® Product
(continued)
Low-E SmartSun™
For current performance information please visit andersenwindows.com.
Low-E SmartSun™ w/HeatLock™
Andersen® NFRC Certified Total Unit Performance – Folding & Entry Doors
PRODUCT PERFORMANCE Andersen® NFRC Certified Total Unit Performance – 200 Series
(continued)
For current performance information please visit andersenwindows.com. Andersen® Product
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-75
Low-E4® Sun
200 Series Hinged Inswing Patio Doors
Low-E4® w/HeatLock™
Low-E4®
Low-E SmartSun™ Heatlock™
Low-E SmartSun™
AND-N-13
Low-E Sun
200 Series Perma-Shield® Gliding Patio Doors
Low-E Heatlock™
Low-E
Low-E4® SmartSun™ w/HeatLock™
Low-E4® SmartSun™
AND-N-61
Low-E4® Sun
200 Series Narroline® Gliding Patio Doors
Low-E4® w/HeatLock™
Low-E4®
Low-E SmartSun™ w/HeatLock™
AND-N-60
Low-E SmartSun™
200 Series Half Circle, Picture & Transom Windows
Low-E w/HeatLock™
Low-E
Glass Type
284
Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Blinds Between the Glass* Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles Without Grilles Simulated Divided Light Grilles Finelight™ Grilles Full Divided Light Grilles
Andersen® Products Total Unit Recycled Content Percentages For current performance information please visit andersenwindows.com.
U-Factor1
SHGC2
VLT3
0.28 0.28 0.29 0.29 0.24 0.24 0.24 0.26 0.27 0.27 0.28 0.29 0.23 0.23 0.23 0.25 0.29 0.29 0.31 0.30 0.24 0.24 0.27 0.29 0.29 0.31 0.31 0.28 0.28 0.30 0.30 0.24 0.24 0.27 0.29 0.34 0.29 0.30 0.30 0.24 0.24 0.24 0.28 0.29 0.29 0.30 0.31 0.28 0.28 0.29 0.30 0.24 0.24 0.24 0.28 0.32 0.32 0.33 0.32 0.27 0.27 0.27 0.30 0.32 0.32 0.31 0.32 0.32 0.32 0.30 0.33 0.27 0.27 0.27 0.29
0.33 0.30 0.29 0.30 0.32 0.29 0.29 0.29 0.22 0.20 0.20 0.20 0.21 0.19 0.19 0.19 0.32 0.29 0.28 0.29 0.32 0.28 0.28 0.20 0.18 0.18 0.18 0.22 0.19 0.19 0.19 0.21 0.19 0.19 0.33 0.30 0.29 0.29 0.29 0.32 0.28 0.28 0.28 0.20 0.18 0.18 0.18 0.22 0.19 0.19 0.19 0.21 0.19 0.19 0.19 0.24 0.21 0.21 0.21 0.24 0.21 0.21 0.21 0.15 0.13 0.13 0.13 0.16 0.14 0.14 0.14 0.16 0.14 0.14 0.14
0.56 0.50 0.50 0.50 0.55 0.49 0.49 0.49 0.51 0.45 0.45 0.45 0.50 0.44 0.44 0.44 0.56 0.49 0.49 0.49 0.55 0.48 0.48 0.31 0.27 0.27 0.27 0.50 0.44 0.44 0.44 0.49 0.43 0.43 0.55 0.52 0.48 0.48 0.48 0.54 0.47 0.47 0.47 0.31 0.27 0.27 0.27 0.50 0.44 0.44 0.44 0.49 0.43 0.43 0.43 0.41 0.35 0.35 0.35 0.40 0.34 0.34 0.34 0.23 0.19 0.19 0.19 0.37 0.31 0.31 0.31 0.36 0.31 0.31 0.31
Andersen® Product
NFRC Rated Window Size
% Pre-Consumer Recycled Content
400 Series Windows and Patio Doors Casement Window
24" (610) x 48" (1219)
4%
Awning Window
48" (1219) x 24" (610)
4%
Casement/Awning Picture Window
47" (1194) x 59" (1499)
8%
Complementary Casement Window
24" (610) x 48" (1219)
5%
Woodwright® Double-Hung Full-Frame Window
47" (1194) x 59" (1499)
13%
Woodwright® Picture Full-Frame Window
47" (1194) x 59" (1499)
14%
Woodwright® Transom Full-Frame Window
47" (1194) x 59" (1499)
13%
Woodwright® Double-Hung Insert Window
36" (914) x 60" (1524)
9%
Woodwright® Picture Insert Window
47" (1194) x 59" (1499)
11%
Woodwright® Transom Insert Window
47" (1194) x 59" (1499)
10%
Woodwright® Arch Double-Hung Window
47" (1194) x 59" (1499)
9%
Woodwright® Springline™ Single-Hung Window
47" (1194) x 59" (1499)
8%
Tilt-Wash Double-Hung Full-Frame Window
47" (1194) x 59" (1499)
6%
Tilt-Wash Picture Full-Frame Window
47" (1194) x 59" (1499)
10%
Tilt-Wash Double-Hung Insert Window
47" (1194) x 59" (1499)
6%
Gliding Window
59" (1499) x 47" (1194)
4%
Specialty Window (all, based on Flexiframe®)
47" (1194) x 59" (1499)
8%
Complementary Specialty Window (rectangular)
47" (1194) x 59" (1499)
7%
Frenchwood® Gliding Patio Door
79" (2007) x 79" (2007)
4%
Frenchwood® Hinged Inswing Patio Door
38" (965) x 82" (2083)
4%
Frenchwood® Hinged Outswing Patio Door
38" (965) x 82" (2083)
3%
Frenchwood® Patio Door Sidelight
24" (610) x 79" (2007)
3%
Frenchwood® Patio Door Transom
79" (2007) x 24" (610)
3%
Complementary Springline™ Patio Door
38" (965) x 82" (2083)
3%
Complementary Arch Patio Door
38" (965) x 82" (2083)
3%
Entry Doors Residential Rectangular Entry Door
38" (965) x 82" (2083)
3%
Residential Springline™ Entry Door
38" (965) x 82" (2083)
3%
Residential Arch Entry Door
38" (965) x 82" (2083)
3%
Commercial Rectangular Outswing Entry Door
38" (965) x 82" (2083)
4%
200 Series Windows and Patio Doors Tilt-Wash Double-Hung Window
47" (1194) x 59" (1499)
4%
Tilt-Wash Picture Window
47" (1194) x 59" (1499)
10%
Gliding Window
59" (1499) x 47" (1194)
5%
Narroline® Gliding Patio Door
79" (2007) x 79" (2007)
6%
Perma-Shield® Gliding Patio Door
79" (2007) x 82" (2083)
4%
Hinged Inswing Patio Door
38" (965) x 82" (2083)
3%
• "% Pre-Consumer Recycled Content" is verified by SCS Global Services (SCS) to meet ISO 14021 standards based on NFRC sizing. Actual recycled content dependent on product size. • Dimensions in parentheses are in millimeters.
• "Low-E4® SmartSun™", "Low-E4®" and "Low-E4® Sun" are Andersen trademarks for "Low-E" glass. 1) U-Factor defines the amount of heat loss through the total unit in BTU/hr/ft 2.°F. The lower the value, the less heat is lost through the entire product. Window values represent non-tempered glass. Use of tempered glass can increase U-Factor ratings. See andersenwindows.com/nfrc for specific performance values. Door values represent tempered glass. 2) Solar Heat Gain Coefficient (SHGC) defines the fraction of solar radiation admitted through the glass both directly transmitted and absorbed and subsequently released inward. The lower the value, the less heat is transmitted through the product. 3) Visible Light Transmittance (VLT) measures how much light comes through a product (glass and frame). The higher the value, from 0 to 1, the more daylight the product lets in over the product’s total unit area. Visible Light Transmittance is measured over the 380 to 760 nanometer portion of the solar spectrum. • NFRC ratings are based on modeling by a third party agency as validated by an independent test lab in compliance with NFRC program and procedural requirements. • This data is accurate as of April, 2015. Due to ongoing product changes, updated test results, or new industry standards or requirements, this data may change over time. Ratings are for sizes specified by NFRC for testing and certification. Ratings may vary depending on use of tempered glass, different grille options, glass for high altitudes, etc. *Available for select patio door sizes. Data based on blinds in full open position.
TECHNICAL DATA About the NFRC
About the Label
The National Fenestration Rating Council (NFRC) is a nonpartisan coalition of professionals whose
Look for this certification label on every window and patio door you
purpose is to provide fair, accurate and credible energy performance ratings for fenestration products.
buy. The NFRC section was designed by the National Fenestration
NFRC's membership includes manufacturers, suppliers, designers, specifiers, utility companies,
Rating Council to provide accurate information that helps you
government agencies and other building industry representatives.
promote the energy efficiency of the homes you build. These ratings allow you - and your customers - to measure and compare the
Andersen Corporation is a founding member of the NFRC and continues to support its work by providing
energy performance of similar products. If the product does not
fair, accurate and credible energy performance ratings to consumers and the building industry. If you
have this label, the NFRC has not verified its claims.
have any questions about the NFRC, its program or energy performance ratings, write them at: NFRC, 6305 Ivy Lane, Suite 140, Greenbelt, MD 20770, Tel: (301) 589-1776 Website: www.nfrc.org
ENERGY STAR® Certified in Highlighted Regions Certifié ENERGY STAR dans les régions en surbrillance ER/RE 18
Combination Design, Product Performance, Installation & Warranty
Do not remove until final code inspection. Save label for future reference.
Energy Rating (ER) represents "Energy Rating" and is a rating used in Canada for product comparison purposes (the higher the ER number, the more energy saved during the heating season).
= Certified/Certifié
ENERGY STAR Climate Zone Map is based DO NOT REMOVE UNTIL FINAL INSPECTION/NE PAS RETIRER AVANT L’INSPECTION FINALE
on U-factor and solar heat gain coefficient criteria for specific ENERGY STAR climate zones within the United States and Canada.
Casement Window AND-N-1-01147-00001 Vinyl-Clad Wood Frame, Dual-Pane Low-E SmartSun Glazing with Argon Product Type: Casement
U-Factor indicates how well a product prevents heat from escaping (the lower the number, the better).
0.27 1.53
0.21
The shading of the map shows which climate zone(s) a particular product and glass type is ENERGY STAR qualified in.
Solar Heat Gain Coefficient measures how well a product blocks heat caused by sunlight (the lower the number, the more it will help
Visible Transmittance refers to how much visible light comes through a product (the closer to 1.0, the more light is transmitted).
WDMA Hallmark Certification verifies the performance ratings of this product were
result reduce electrical bills and energy use).
WINDOW & DOOR MANUFACTURERS ASSOCIATION
WDMA
Licensee: 129-H-861 Andersen Corporation 400 Series Casement Window
Hallmark Certified www.wdma.com
Manufacturer stipulates Hallmark Certification as indicated below.
tested by a third-party testing laboratory. Test Standards
reduce the use of air conditioning and as a
0.49
STANDARD
RATING
AAMA/WDMA/CSA 101/IS2/A440-08
Class LC-PG 50 Size Tested 56" X 71" DP+50/-50
AAMA/WDMA/CSA 101/IS2/A440-05
C-LC 50 Size Tested 56" X 71" DP+50/-50
AAMA/WDMA/CSA 101/I.S.2/A440-08 A440S1-09
Class LC-PG50 - 1435mm x 1622mm Positive/Negative Design Pressure (DP) = 2400 Pa/-2400 Pa Water Penetration Resistance Test Pressure = 360 Pa Canadian Air Infiltration/Exfiltration = A3
FL 12496 G lazing: 2.2mm A N o u t er /2. 3m m H S in n er This product meets the Green Seal Standard for Windows, GS-13, for energy efficiency, heavy metals in the frame and sash materials, packaging, and consumer education materials.
Complies with HUD UM Bulletin No. 111
Performance Grade (PG) and Design Pressure (DP) Ratings
Glass Construction used with this product type
Meets or exceeds CEC & IECC Air Infiltration Requirements of 0.2 CFM/sq.ft. or lower. WDMA Hallmark Certification Program
• NFRC ratings are based on modeling by a third-party agency as validated by an independent test lab in compliance with NFRC program and procedural requirements.
285
THE ENVIRONMENT HAS A BUSINESS PARTNER
Respect for the environment is nothing new at Andersen. For more than a century, it’s been part of who we are. Our commitment to recycle and reclaim materials began simply because it was good business. Now it’s part of our commitment to sustainability and responsible stewardship of all our resources. Andersen is committed to providing you with long-lasting*, energy-efficient windows and doors. Visit andersenwindows.com/sustainability for more information.
WINDOW & DOOR MANUFACTURERS ASSOCIATION
WDMA
Andersen® products are certified under the National Fenestration Rating Council’s voluntary third-party certification program designed to ensure accurate energy performance ratings and labeling.
Andersen was one of the first U.S. window manufacturers to receive Forest Stewardship Council® (FSC®) Chain-of-Custody certification (FSC-CO16636). This certification is awarded to companies that meet FSC® standards for traceability in their wood supply chain.
The Window & Door Manufacturers Association (WDMA) Hallmark Certification program includes product testing and quality control process audits to verify that Andersen® windows and doors are produced in conformance with the industry standards for air, water resistance and structural performance.
Andersen was the first window and patio door manufacturer to offer Green Seal™ certified products. Select 400 and 200 Series products meet Green Seal energy efficiency requirements and are manufactured and packaged in a consistent, environmentally responsible manner. To view a list of Andersen® products that are Green Seal™ certified, please visit the “Find Green Products & Services” section of www.greenseal.org.
Andersen was the first window manufacturer to certify our products for indoor air quality, beginning in 2008. Our Indoor Advantage™ Gold certification by SCS Global Services (SCS) meets the rigorous high standards for healthier indoor air quality set by the California Specification 01350.
Under U.S. Green Building Council (USGBC) guidelines, Andersen is able to claim a percentage of material in its Fibrex® product as pre-consumer recycled content. SCS Global Services (SCS) has certified this amount for Andersen.
Andersen Corporation is proud to be an ENERGY STAR® partner. For over 100 years, Andersen has built a reputation for environmental stewardship and energy-efficient products. In fact, Andersen has been part of the ENERGY STAR program since it started, and was the first window manufacturer to be named an ENERGY STAR National Window Partner of the Year in 1999.
* Visit andersenwindows.com/warranty or see your Andersen supplier for details on the 400 Series Limited Warranty. All logos and marks are trademarks of their respective owners.
286
TECHNICAL DATA
Andersen® windows and doors can make significant contributions to the success of sustainable design strategies. As a charter member of U.S. Green Building Council, we are active supporters of certified green buildings. Our products may assist customers in pursuing green building programs, such as Leadership in Energy and Environmental Design (LEED®), the National Green Building Standard, Green Globes, GreenStar and more. Below you will find a high-level overview of how our products may assist project teams with pursuing LEED v4 or the NAHB National Green Building Standard rating systems. More detailed credit summaries, as well as information about how Andersen products can support earlier
LEED v4 FOR BUILDING DESIGN AND CONSTRUCTION: NEW CONSTRUCTION AND MAJOR RENOVATIONS
LEED v4 FOR BUILDING DESIGN AND CONSTRUCTION: HOMES AND MULTIFAMILY MIDRISE
compiled in order to achieve one of four levels of
Andersen windows and patio doors may assist project
Andersen windows and patio doors may assist project
project strategy in the following NAHB National
teams in pursuing the following credits in the LEED v4
teams in pursuing the following credits in the LEED v4
Green Building Standard credits:
BD+C: New Construction rating system.
BD+C: Homes rating system.
Site Design & Development
Integrative Process Credit
Energy & Atmosphere
Lot Design, Preparation & Development
Energy & Atmosphere • Minimum energy performance prerequisite • Optimize energy performance credit • Renewable energy production credit • Green power and carbon offsets credit Materials & Resources • Construction and demolition waste management planning credit • Building product disclosure and optimization sourcing of raw materials credit • Construction and demolition waste• • • • • • • • • • • • management credit Indoor Environmental Quality • Minimum indoor air quality performance• • • • • • •
• Minimum energy performance prerequisite • Education of the homeowner, tenant or building prerequisite • Annual energy use credit • Building orientation for passive solar credit • Air Infiltration credit • Windows credit Materials & Resources • Durability management prerequisite • Environmentally preferable products credit • Construction waste management credit
schools • Enhanced indoor air quality strategies credit • Low-emitting materials credit • Thermal comfort credit • Daylight credit • Quality views credit • Acoustic performance credit (option 2)
Andersen windows and patio doors may assist your
Resource Efficiency • Windows and doors not requiring paint or stain • Flashing details • Construction materials recycled off-site • Wood-based products from certified forestry • Innovative practices Energy Efficiency • Minimum energy requirements (mandatory) • Fenestration (mandatory) • Better energy requirements - performance path • Better fenestration • Additional practices - daylighting through roof
• Ventilation prerequisite
• Additional practices - renewable energy
prerequisite • Minimum acoustic performance prerequisite – • •
certification: Bronze, Silver, Gold or Emerald.
Indoor Environmental Quality • Low-emitting products credit
Combination Design, Product Performance, Installation & Warranty
versions of LEED certification (e.g., LEED v3 or LEED 2008), are available at andersenwindows.com.
Water Efficiency Indoor Environmental Quality
NAHB NATIONAL GREEN BUILDING STANDARD The NAHB National Green Building Standard, now called the ICC 700-2008 National Green Building Standard, is ANSI (American National Standards
• Pollutant source control - formaldehyde • Pollutant source control - interior architectural coatings • Pollutant source control - interior adhesives and sealants
Institute) approved, and was written in collaboration
Operation, Maintenance & Building Owner Education
with the International Code Council, and is a
• Homeowner's binder
comprehensive green building rating system. Each
• Building construction manual
category contains multiple credit point standards for a project team to consider during design, construction, and function of the building. The credit points are then
Based on ICC 700-2008 National Green Building Standard.
287
INSTALLATION ACCESSORIES Listed are optional accessories available for the installation of Andersen® windows and doors. You'll also find key considerations regarding the use and installation of every Andersen product. Keep the instruction guidelines and safety information in mind when considering the installation and use of any Andersen product. Should you have any questions, contact your local Andersen supplier. Thank you for considering and using Andersen products. COIL STOCK Andersen aluminum coil stock can be ordered to match any of our 11 trim colors. Made from .019-gauge aluminum, coil stock is available in 24" (610) x 50" (1270) rolls. Colormatched 1 1 ⁄ 4" (32) stainless steel trim nails are also available and can be ordered in 1 lb. or .454 kg boxes.
Fibrex® Trim Board Auxiliary Casing Vinyl Laminated Board Rigid Vinyl “H” Channel Rigid Vinyl “h” Channel Rigid Vinyl “J” Channel
FIBREX® TRIM BOARD
CONTINUOUS DRIP CAP
Andersen offers a 3 1 ⁄ 2" (89) wide by 3 ⁄ 4" (19) thick cellular Fibrex® trim board in 10' (3048) lengths. Available in the same 11 colors as the exterior trim system, this solid trim board can be cut or ripped to size and can be fastened using nails or screws.
Included on 400 Series with vertical (ribbon) joins. Heavy 24-gauge corrosion-resistant aluminum construction. Available in 6' (1829), 10' (3048) and 12'–7 1 ⁄ 8" (3848) lengths and in any of the 11 trim colors.
COLOR
LENGTH
DEPTH
WIDTH
11 colors 6 colors W,S,T
120" (3048) 150" (3810) 96" (2438)
3 ⁄ 4" (19) 1 3 ⁄ 16" (30) 1 ⁄ 2" (13)
31 ⁄ 2" (89) 1 3 ⁄ 16" (30) 24" (610) 48" (1219)
W
96" (2438) & 120 (3048)
1 ⁄ 2" (13)
W
84" (2134) & 150" (3810)
3 ⁄ 4" (19)
1" (25)
S,T W,S,T W,S,T
84" (2134) & 150" (3810) 150" (3810) 150" (3810)
3 ⁄ 4" (19)
3 ⁄ 4" (19)
1 ⁄ 2" (13)
1" (25)
1 ⁄ 2" (13)
3 ⁄ 4" (19)
INSTALLATION INFORMATION
Keep in mind that rough opening dimensions may need to be altered from published guidelines, depending on installation methods, joining methods, replacement methods, etc. For example, flashing systems can reduce the amount of available rough opening space and should be factored in when calculating rough opening dimensions. The use of support or joining materials will encroach on the rough opening and may require additional rough opening space between the unit and the building structure, depending on the thickness of the flashing system and joining materials used. To facilitate drainage, the sill plate should never slope toward the interior. For challenging environments and other information, refer to EEBA’s (Energy and Environmental Building Association) Water Management Guide (www.eeba.org).
Rigid vinyl “J,” “h” and “H” channel and vinyl laminated board. EXTENSION JAMBS
AUXILIARY CASING
Available for most Andersen products. See individual sections for details. Auxiliary casing is made of cellular Fibrex. Available in White, Canvas, Sandtone, Terratone, Forest Green, Dark Bronze and Black colors. Dimensions are 1 3 ⁄ 16" (30) by 1 13 ⁄ 16" (30) in 150" (3810) lengths.
House Wrap House Wrap
Shim at Sill Shim at Sill
COLOR-MATCHED SEALANT Color-matched sealant is available in Andersen exterior colors. This high-quality sealant can be used during the installation of all Andersen products.
Side Flashing Side Flashing
Rough Opening Gap Rough Opening Gap
Sill Flashing Sill Flashing
Recessed 3/8" Recessed 3/8"
Rough Sill Rough Sill
Rough Opening Gap Rough Opening Gap
Interior Interior Rough Opening Width Rough Opening Width
Rough Opening Height Rough Opening Height
ROUGH OPENINGS The purpose of a rough opening is to allow for proper spacing between the window or patio door unit and the building structure. The space is required for locating, leveling and squaring the unit during installation and to provide an area for insulation. A rough opening that is incorrectly sized may affect unit operation and may not allow for adequate fastening of the unit to the building structure. Andersen rough opening dimensions are provided as a guideline to help determine the minimum amount of space needed between the window or patio door and the building structure. See appropriate product sections for rough opening guidelines for each product.
VINYL CHANNELS AND LAMINATED BOARD
1/4" Min." 1/4 Min.
Example of window sill flashing in a membrane drainage system.
1/4" Minimum SpaceMinimum at Head 1/4" Space at Head 1/4" Minimum SpaceMinimum at Sides 1/4" Space at Sides Shims Shims
Varies Varies
Sill Flashing Sill Flashing
Interior Interior
Example of window unit installed using Andersen published minimum rough opening dimensions.
Drip Cap Drip Cap
Exterior Exterior
House Wrap House Wrap
Rough Sill Rough Sill
Pan Head Screws Pan Head Screws
Gusset Plate Gusset Plate
3/16" Top of ScrewsTop to Bottom 3/16" of of Gusset Screws to Plate Bottom of Gusset Plate Unit 1 Unit Unit 12 Unit 2
Interior Interior Example of two units joined together with the use of gusset plates and pan head screws that will require additional rough opening space.
IMPORTANCE OF PROPER INSTALLATION Proper installation and maintenance of Andersen products is essential to attain optimum performance and operation. Installation instructions that provide guidelines for proper installation are typically provided with Andersen products. They are also available by visiting andersenwindows.com. Remember that every installation is different, and Andersen strongly recommends consultation with the local supplier or an experienced contractor, architect or structural engineer prior to the installation of any Andersen product. The method of attachment for Andersen products, fastener selection and code compliance is the responsibility of the architect, building owner, contractor, installer and/or consumer. For more complete installation details, visit andersenwindows.com or see your Andersen supplier. • Dimensions in parentheses are in millimeters.
288
TECHNICAL DATA
CODES Appropriate selection of Andersen products that conform to all applicable laws, ordinances, building codes and safety requirements is the sole responsibility of the architect, designer, building owner and/or contractor. Check with your local building code officials for specific information. Unit wind load, performance grade and energy performance information is provided on pages 255-285. For up-to-date product performance information, visit andersenwindows.com. The performance of any building system depends on the design and construction of the building system in its entirety, which should meet building code requirements, as well as address product and material limitations and local environment and climate. DRIP CAPS Drip caps are a specific type of flashing or trim that is used at the head of a window or door to direct water from the drainage plane out beyond the face of the unit. FLASHING Flashing is an important element in a building’s water management system. It is used to shed and direct water to the building exterior or to the drainage plane. Flashing materials are typically applied starting from the bottom and working upward, with each successive layer overlapping the previous one in shingle fashion. Water infiltration problems in any type of building can be reduced by properly flashing and/or sealing around all building openings, including windows and doors.
of the sealant. A general rule of thumb is that the depth of the sealant joint should be equal to half the width (D= W/2), but generally not less than 1 ⁄ 4" (6) or more than 1 ⁄ 2" (13). Foam-plastic backer rod can be used to limit the depth of the sealant joint, to provide a backstop for tooling the sealant without damage to the bond. It also acts as a bond breaker to help minimize stress in the sealant. Sealants should be maintained seasonally and repaired and/or replaced as needed. GENERAL INSTALLATION GUIDELINES 1. Read and follow the installation guide in its entirety. 2. Decide whether you are integrating to a surface barrier or a membrane drainage system before installing the product. The appropriate method for your installation may vary based on building design, application and industry practices. 3. Make certain the drainage plane is continuous (proper overlaps to shed water, taped seams, etc.). 4. Andersen products should be installed only in the vertical position. 5. Check the rough opening to make sure it is sized properly, is square and is level. 6. Install the window plumb. 7. Install the window level. 8. Install the window square. Diagonal measurements should be within 1 ⁄ 8" (3). 9. Follow installation instructions to properly locate shims and to make sure that units are plumb, level and square. Shims are always required under the window jambs at the sill and along the jambs on the sides. 10. Check for squareness of unit before final anchoring of the product into the wall. 11. Anchor window as directed with appropriate fasteners. 12. Integrate the window into the drainage plane of the wall using quality flashing and sealing materials. All flashing materials should be properly overlapped to shed water. 13. Allow 1 ⁄ 4" (6) minimum space for a sealant joint around perimeter of unit between exterior finish materials and unit. 14. Insulate and seal the interior cavity between the window
USE OF SHIMS Shims are often used along the side jambs of windows and doors to center the unit in the rough opening and to position it plumb, level and square. In addition, shims are always required for windows only under the sill at the side jambs to lift it off the rough sill. Shims also enable a straight frame for proper weatherstrip contact and unit operation. If not placed properly, unit performance and operation can be affected. Use waterproof shims capable of supporting the weight of the product. When using tapered shims, use them in pairs with the tapers opposing each other to avoid tilting the unit or twisting (rotating) of the jambs.
EXTERIOR PAINTING/SEALING OF ANDERSEN PRODUCTS The exterior of some Andersen products may be painted or stained. However, improper painting and staining may cause damage to vinyl, aluminum and other exterior materials. Please refer to the individual product sections for details on painting Andersen product exteriors.
SEALANTS Sealants are elastic materials used to block the passage of water and/or air while allowing movement between the two sides of the joint. A sealant should bond tightly and be able to expand and contract to accommodate joint movement without cracking or tearing away from the substrate. Surfaces must be clean, dry and sound for adequate sealant adhesion. Choose a sealant that is compatible with, and that will adhere adequately to, all building materials used in the window and door area. Proper sealant joint design is based upon the expected movement of adjacent materials and the movement capability
CAUTIONS 1. Do not apply any type of film to insulating glass. Thermal stress and glass damage can result. Andersen Corporation is not responsible for product performance when films are applied to Andersen products. 2. The use of removable insulating materials such as insulated window coverings, shutters and other shading devices may also cause thermal stress conditions and/or deformation of protective vinyl. In addition, excessive condensation may result, which can have a deteriorating effect on the window or patio door unit(s) involved. Andersen Corporation is not
frame and the rough opening. 15. Check unit operation before application of interior trim. 16. Stain and/or seal all unfinished wood surfaces promptly to minimize moisture absorption. ®
responsible for product performance when these kinds of materials or devices are applied to or used in conjunction with Andersen products. 3. In wall construction utilizing brick facades, leave adequate clearance between sill, jambs and brick for sealing and dimensional change of framework. 4. Acid solutions commonly used to wash brick and other masonry materials will damage glass, fasteners, hardware and metal flashing. Protect unit and follow cleaning product instructions carefully. Damage caused by acid solution is not covered under the Andersen limited warranty. 5. Andersen windows may be combined in almost unlimited ribbons or stacks if each unit is positively secured to structural elements on opposing sides and if the proper joining system is used. See page 255 for more information. SAFETY GLASS Unless specifically ordered, Andersen windows are not made with safety glass and, if broken, the glass could fragment, causing injury. Andersen windows may be ordered with tempered glass which may reduce the likelihood of injury when broken. All Andersen patio doors are made with tempered glass. Differences in appearance between tempered and non-tempered glass can be expected. Slight visual distortions may be noticeable and occur normally as a result of the tempering process. Building codes require safety glass in locations adjacent to or near doors and other locations. WINDOW AND PATIO DOOR SAFETY Windows may provide a secondary avenue of escape or rescue in an emergency, such as a fire. Every family should develop an escape plan and make sure family members know how to escape from the home in an emergency. In your plan, include two ways to escape from every room in case one way is blocked by fire or smoke, and make sure you have a designated meeting place outside. A window or a door is an alternate means of escape or rescue. Practice your plan until each member of the family understands it and is able to escape without assistance. Remember, you may not be able to reach children during a fire emergency. Teach children – even very young children – that they must escape from a fire in the home and never hide from the fire or from emergency personnel. LOOKOUT FOR KIDS PROGRAM The Consumer Product Safety Commission has said: “Keep children away from open windows to prevent falls. Don’t depend on insect screens to keep the child from falling out of the window. They are designed to keep insects out, not children in. Avoid placing furniture near windows to keep children from climbing to a window seat or sill.” In an effort to educate consumers about the potential for child falls from windows, Andersen Corporation created the LookOut For Kids® Program. It combines a window and door safety brochure and specific product instructions to help make window and door safety an important priority for consumers. For more information on child safety, write: Andersen Corporation LookOut For Kids® Program 100 Fourth Avenue North Bayport, MN 55003 Call 1-800-313-8889 or email us: lofk@andersencorp.com
• Dimensions in parentheses are in millimeters.
289
Combination Design, Product Performance, Installation & Warranty
GENERAL NOTES When ordering, make certain you specify, then verify, the exact product, unit dimensions, configuration requirements, color and options you desire on each window or patio door. Before installing the product, we suggest you verify that it includes the features and options you ordered. Visit andersenwindows.com for product installation and joining guides. Printing limitations prohibit exact color duplication of products. View actual samples for building specifications. Andersen Corporation reserves the right to change details, specifications or sizes without notice. The customer assumes all risk of alterations made to Andersen® products.
Limited Warranty Units UnitsManufactured ManufacturedAfter AfterFebruary February8,8,2015 2015
Para Paraver verlalaversión, versión,en enespañol, español,de deesta estaGarantía Garantíalimitada limitadayyProceso Procesode de resolución resoluciónde decontroversias, controversias,visite visiteandersenwindows.com andersenwindows.com
LIMITED LIMITEDWARRANTY WARRANTYAND ANDDISPUTE DISPUTERESOLUTION RESOLUTIONPROCESS PROCESS IMPORTANT: IMPORTANT:Please Pleasecarefully carefullyread readthe theDispute DisputeResolution ResolutionProcess Processthat thatappears appears ininthis thisdocument documentafter afterthe theLimited LimitedWarranty. Warranty.The TheDispute DisputeResolution ResolutionProcess Process includes includesclass classaction actionand andjury jurytrial trialwaivers waiversthat thataffect affectyour yourlegal legalrights. rights.To Toopt opt out outofofthese thesewaivers, waivers,you youmust mustvisit visitour ourwebsite websiteatatwww.andersenwindows.com/ www.andersenwindows.com/ optout optoutand andcomplete completethe theopt-out opt-outform formwithin withinone oneyear yearfrom fromthe thedate dateofofpurchase purchase productsfrom fromaadealer dealerororretailer. retailer.The Theopt-out opt-outonly onlyapplies appliestoto ofofyour yourAndersen Andersen®®products the theterms termsofofthe theDispute DisputeResolution ResolutionProcess. Process.
400 400Series/200 Series/200Series SeriesWindows Windows&&Doors DoorsLimited LimitedWarranty Warranty Transferable TransferableLimited LimitedWarranty Warrantyon onGlass Glass
The Theglass glassininAndersen Andersen®®factory factoryglazed glazedwindows windowsand anddoors doors(including (includingdual-pane dual-paneglass, glass, glass, High-Performance High-Performance Low-E4 Low-E4®® Sun Sun glass, glass, HighHighHigh-Performance High-Performance Low-E4 Low-E4®® glass, SmartSun™™ glass, glass, High-Performance High-Performance Low-E4 Low-E4®® PassiveSun PassiveSun™™ Performance Performance Low-E4 Low-E4®® SmartSun glass, glass, Heatlock Heatlock™™ glass, glass, Low-E Low-E glass, glass, patterned patterned glass glass (including (including obscure, obscure, pebble, pebble, grilles,divided dividedlight lightgrilles grillesand andtempered tempered fern, fern,reed reedand andcascade cascadedesigns)), designs)),Finelight Finelight™™grilles, versions versionsofofthese theseglass glassoptions optionsisiswarranted warrantedtotobe befree freefrom fromdefects defectsininmanufacturing, manufacturing, materials materials and and workmanship workmanship for for twenty twenty (20) (20) years years from from the the date date ofof purchase purchase from from the theretailer/dealer. retailer/dealer.ItItisisalso alsowarranted warrantednot nottotodevelop, develop,under undernormal normalconditions, conditions,any any material materialobstruction obstructionofofvision visionresulting resultingfrom frommanufacturing manufacturingdefects defectsororas asaaresult resultofof premature prematurefailure failureofofthe theglass glassorororganic organicseal sealfor fortwenty twenty(20) (20)years yearsfrom fromthe thedate dateofof purchase purchasefrom fromthe theretailer/dealer. retailer/dealer.Patterned Patternedglass glass(including (includingobscure, obscure,pebble, pebble,fern, fern, reed reedand andcascade cascadedesigns) designs)isiswarranted warrantednot nottotodevelop, develop,under undernormal normalconditions, conditions,any any material materialchange changeininappearance appearanceresulting resultingfrom frommanufacturing manufacturingdefects defectsororas asaaresult result ofofpremature prematurefailure failureofofthe theglass glassorororganic organicseal sealfor fortwenty twenty(20) (20)years yearsfrom fromthe thedate date ofofpurchase purchasefrom fromthe theretailer/dealer. retailer/dealer.This Thislimited limitedwarranty warrantyon onglass glassdoes doesnot notapply apply artglass, glass,insulated insulatedart artglass, glass,impact-resistant impact-resistant totospecial specialorder orderglazings, glazings,Andersen Andersen®®art glass glassororglass glassthat thatisisnot notfactory factoryinstalled installedbybyAndersen. Andersen. InInthe theevent eventaaglass glassfailure failureoccurs occursas asaaresult resultofofaadefect defectininmanufacturing, manufacturing,materials materials ororworkmanship workmanshipwithin withinthe thelimited limitedwarranty warrantyperiod, period,Andersen, Andersen,atatits itsoption, option,will: will:(1) (1) provide provide the the appropriate appropriate replacement replacement glass glass product product toto the the Andersen Andersen retailer/dealer retailer/dealer you you specify specify — — labor labor isis not not included; included; oror (2) (2) provide provide aa factory-authorized factory-authorized repair repair toto the theexisting existingglass glassatatno nocost costtotoyou; you;oror(3) (3)refund refundthe theoriginal originalpurchase purchaseprice. price.Such Such replacement replacementparts partsororrepair repairare arewarranted warrantedfor forthe theremainder remainderofofthe theoriginal originallimited limited warranty warrantyperiod. period.
Transferable TransferableLimited LimitedWarranty Warrantyon onComponents ComponentsOther OtherThan ThanGlass Glass
Non-glass Non-glassportions portionsofofAndersen Andersen®®windows windowsand anddoors doors(including (includingnon-electric non-electricoperators, operators, locks, locks,lifts, lifts,balance balancesystems, systems,hinges, hinges,handles, handles,insect insectscreens, screens,weatherstripping, weatherstripping,exterior exterior trim, trim,sash sashand andframe framemembers) members)are arewarranted warrantedtotobe befree freefrom fromdefects defectsininmanufacturing, manufacturing, materials materialsand andworkmanship workmanshipfor foraaperiod periodofoften ten(10) (10)years yearsfrom fromthe thedate dateofofpurchase purchasefrom from the theretailer/dealer. retailer/dealer.This Thislimited limitedwarranty warrantydoes doesnot notapply applytotoAndersen Andersenelectric electricwindow window operators, operators,retractable retractableinsect insectscreens screensororfinishes finisheson onbright brightbrass brassand andsatin satinnickel nickeldoor door windowsand anddoors doorswith withwood woodexteriors exteriors hardware. hardware.The Thenon-glass non-glassportions portionsofofAndersen Andersen®®windows and andcommercial commercialdoors doorsare aresubject subjecttotoaalimited limitedwarranty warrantywith withaafive five(5) (5)year yearperiod, period,but but otherwise otherwiseidentical identicaltotothe theten ten(10) (10)year yearlimited limitedwarranty warrantydescribed describedabove. above.
InInthe theevent eventaacomponent componentother otherthan thanglass glassfails failsas asaaresult resultofofaadefect defectininmanufacturing, manufacturing, materials materialsororworkmanship workmanshipwithin withinthe thelimited limitedwarranty warrantyperiod, period,Andersen, Andersen,atatits itsoption, option, will: will:(1) (1)provide providereplacement replacementparts partstotothe theAndersen Andersenretailer/dealer retailer/dealeryou youspecify specify— —labor labor isisnot notincluded; included;oror(2) (2)provide provideaafactory-authorized factory-authorizedrepair repairtotothe theexisting existingcomponent component atatno nocost costtotoyou; you;oror(3) (3)refund refundthe theoriginal originalpurchase purchaseprice. price.Such Suchreplacement replacementparts partsoror repairs repairsare arewarranted warrantedfor forthe theremainder remainderofofthe theoriginal originallimited limitedwarranty warrantyperiod. period.
No NoOther OtherWarranties Warrantiesor orRepresentations Representations THIS THISLIMITED LIMITEDWARRANTY WARRANTYISISININLIEU LIEUOF OFALL ALLOTHER OTHERWARRANTIES, WARRANTIES,EXPRESS EXPRESSOR ORIMPLIED, IMPLIED, INCLUDING, INCLUDING,BUT BUTNOT NOTLIMITED LIMITEDTO, TO,ANY ANYIMPLIED IMPLIEDWARRANTIES WARRANTIESOF OFMERCHANTABILITY MERCHANTABILITY OR OR FITNESS FITNESS FOR FOR AA PARTICULAR PARTICULAR PURPOSE. PURPOSE. ALL ALL WARRANTIES WARRANTIES ARE ARE LIMITED LIMITED TO TO THE THE APPLICABLE APPLICABLESTATUTE STATUTEOF OFLIMITATIONS, LIMITATIONS,BUT BUTININNO NOCASE CASEWILL WILLEXTEND EXTENDBEYOND BEYONDTHE THE LIMITED LIMITEDWARRANTY WARRANTYPERIODS PERIODSSPECIFIED SPECIFIEDABOVE. ABOVE.ANDERSEN ANDERSENEXCLUDES EXCLUDESAND ANDWILL WILLNOT NOT BE BELIABLE LIABLEFOR FORANY ANYINCIDENTAL INCIDENTALOR ORCONSEQUENTIAL CONSEQUENTIALDAMAGES, DAMAGES,WHETHER WHETHERARISING ARISING OUT OUT OF OF CONTRACT, CONTRACT, TORT TORT OR OR OTHERWISE. OTHERWISE. THE THE REMEDY REMEDY OF OF REPAIR, REPAIR, REPLACEMENT REPLACEMENT OR ORREFUND REFUNDOF OFTHE THEACTUAL ACTUALPURCHASE PURCHASEPRICE PRICEOF OFTHE THEPRODUCT PRODUCTPROVIDED PROVIDEDBY BYTHIS THIS LIMITED LIMITEDWARRANTY WARRANTYISISTHE THEEXCLUSIVE EXCLUSIVEREMEDY REMEDYWITH WITHRESPECT RESPECTTO TOANY ANYAND ANDALL ALLLOSS LOSS OR ORDAMAGE. DAMAGE.
Applicable ApplicableLaw Law
This ThisLimited LimitedWarranty Warrantyisisonly onlyapplicable applicableininthe theU.S.A. U.S.A.(i.e., (i.e.,the thefifty fiftystates statesand andthe the District DistrictofofColumbia). Columbia).This ThisLimited LimitedWarranty Warrantygives givesyou youspecific specificlegal legalrights, rights,and andyou you may mayalso alsohave haveother otherrights rightswhich whichmay mayvary varyfrom fromstate statetotostate. state.Some Somestates statesdo donot not allow allowthe theexclusion exclusionororlimitation limitationofofincidental incidentalororconsequential consequentialdamages damagesororlimitation limitation ofofthe theduration durationofofan animplied impliedwarranty, warranty,sosothe theabove abovelimitations limitationsororexclusions exclusionsmay may not notapply applytotoyou. you.IfIfany anyspecific specificterm termofofthis thisLimited LimitedWarranty Warrantyisisprohibited prohibitedbybyany any applicable applicablelaw, law,ititshall shallbe benull nulland andvoid, void,but butthe theremainder remainderofofthis thisLimited LimitedWarranty Warranty shall shallremain remainininfull fullforce forceand andeffect. effect.
What WhatIsIsNOT NOTCovered Coveredby bythis thisLimited LimitedWarranty: Warranty: Specific SpecificAdditional AdditionalExclusions Exclusions
InInaddition additiontotoany anyother otherlimitations limitationsororexclusions exclusionsininthis thisLimited LimitedWarranty, Warranty,Andersen Andersen shall shallhave haveno noobligation obligationfor forproduct productfailure, failure,damage damageororcosts costsdue duetotoororrelated relatedtotothe the following: following: •• Product Product modifications modifications oror glass glass shading shading devices devices (e.g., (e.g., glass glass tinting, tinting, security security systems, systems,improper improperpainting paintingororstaining, staining,insulated insulatedcoverings, coverings,etc.). etc.). •• Units Unitsimproperly improperlyassembled assembledororimproperly improperlymulled mulledbybyothers. others. •• Failure Failuredue duetotothe theapplication applicationofofnon-Andersen non-Andersenhardware hardware(e.g., (e.g.,locksets, locksets,trim trimsets, sets, hinges, hinges,panic panichardware, hardware,closers, closers,etc.). etc.). •• Failure Failuretotoproperly properlyinstall installAndersen Andersenhardware hardwareand/or and/orexterior exteriortrim. trim. •• Adjustments Adjustmentsororcorrections correctionsdue duetotoimproper improperinstallation. installation. •• Improper Improperinstallation installationororuse, use,including includinguse useofofaanon-commercial non-commercialdoor dooras asaamain main entrance entranceororexit exitdoor doorfor foraabuilding buildingother otherthan thanaasingle-family single-familyresidential residentialunit unitoror re-installing re-installingan anAndersen Andersenwindow windoworordoor doorafter afteritithas hasbeen beenremoved removedfrom fromaabuilding building and andre-sold re-soldand/or and/orre-installed re-installedininaadifferent differentbuilding. building. •• Exposure Exposuretotoconditions conditionsbeyond beyondpublished publishedperformance performancespecifications. specifications. •• Water Waterinfiltration infiltrationother otherthan thanas asaaresult resultofofaadefect defectininmanufacturing, manufacturing,materials materialsoror workmanship. workmanship. •• Condensation. Condensation. •• Improper Impropermaintenance, maintenance,such suchas asuse useofofbrick brickwash, wash,razor razorblades, blades,sealants, sealants,sanding sanding ororimproper improperwashing. washing. •• Failing Failingtotoproperly properlyseal sealand andmaintain maintainthe theexposed exposedwood woodportions portionsofofaaproduct. product.This This includes, includes,but butisisnot notlimited limitedto, to,the theexposed exposedwood woodon onall allsides sidesofofaadoor doorpanel panel(e.g., (e.g., exterior, exterior,interior, interior,top, top,bottom, bottom,and andboth bothsides), sides),aadoor doorframe frameand andwood woodgrilles. grilles. •• Chemicals Chemicalsororairborne airbornepollutants, pollutants,such suchas assalt saltororacid acidrain. rain. •• Delivery Deliverybybyothers. others. •• Accidents. Accidents. •• Acts ActsofofGod. God. •• Normal Normalwear wearand andtear. tear.
Additional Additionalitems itemsexcluded excludedfrom fromthis thislimited limitedwarranty: warranty:
•• Labor Labortotoreplace replacesash sashorordoor doorpanels, panels,glass glassororother othercomponents. components. •• Labor Laborand andother othercosts costsrelated relatedtotothe theremoval removaland anddisposal disposalofofdefective defectiveproduct. product. •• Labor Laborand andmaterials materialstotopaint paintororstain stainany anyrepaired repairedororreplaced replacedproduct, product,component, component, trim trimororother othercarpentry carpentrywork workthat thatmay maybe berequired. required. 44778800550000 BBEE Revised Revised12/16/14 12/16/14
290
®® How Limited Howtotoregister registeryour yourOwner-To-Owner Owner-To-Owner LimitedWarranty Warranty
Andersen Andersenoffers offersquick, quick,easy easywarranty warrantyregistration registrationononourourwebsite. website.Just Justgogoto to www.andersenwindows.com/warranty and submit your warranty www.andersenwindows.com/warranty and submit your warranty information informationonline. online.ByByregistering, registering,youyouwillwillexpedite expediteanyany warranty service youyou may have in in thethe future. In In addition, warranty service may have future. addition, youyoucancanreceive receiveproduct productinformation informationupdates, updates,safety safety notices noticesand andspecial specialoffers offersregarding regardingnew newproducts, products,asas well wellasasinformation informationregarding regardingenhancements enhancementsforforthethe windows and doors you’ve registered. AllAll warranty information is is treated confidentially windows and doors you’ve registered. warranty information treated confidentially and willwill notnot bebe sold or or traded to to anyany person or or organization outside of of Andersen and and sold traded person organization outside Andersen and thethe Andersen Dealer Network. Andersen Dealer Network.
Warranty WarrantyClaim ClaimProcedure Procedure
To To make a claim under this Limited Warranty, contact thethe Andersen retailer/dealer who make a claim under this Limited Warranty, contact Andersen retailer/dealer who ® ® sold youyou your Andersen product. Or,Or, youyou may contact usus at:at: sold your Andersen product. may contact Andersen Windows, Inc./Andersen Service Center Andersen Windows, Inc./Andersen Service Center 100 Fourth Avenue North 100 Fourth Avenue North Bayport, MNMN 55003-1096 Bayport, 55003-1096 YouYou may also contact usus using thethe Parts & Service section of of ourour website at at may also contact using Parts & Service section website www.andersenwindows.com or or reach usus byby phone at at 1-888-888-7020. www.andersenwindows.com reach phone 1-888-888-7020.
You Youcan canhelp helpususserve serveyou youfaster fasterbybyproviding providingthethefollowing followingimportant important information: information:
• •Description of of thethe product such asas thethe exterior color, unit type and size and inside Description product such exterior color, unit type and size and inside visible glass measurements. visible glass measurements. • •Glass logo information etched in in thethe inside corner of of thethe glass. Glass logo information etched inside corner glass. • •Description of of product concerns. Description product concerns. • •Documentation of of thethe purchase date, if available. Documentation purchase date, if available. • •Your Yourname, name,address address(with (withzipzipcode) code)where wherethetheproduct productis isinstalled installedand andtelephone telephone numbers. numbers.
ForFor specific warranty information outside thethe United States, please contact your local specific warranty information outside United States, please contact your local distributor or or write to:to: distributor write Andersen Windows, Inc.Inc. / International Division Andersen Windows, / International Division 100 Fourth Avenue North 100 Fourth Avenue North Bayport, MNMN 55003-1096 Bayport, 55003-1096
DISPUTE DISPUTERESOLUTION RESOLUTIONPROCESS PROCESS General General
If Ifyouyouarearedissatisfied dissatisfiedwith withthetheremedy remedyprovided providedto toyouyouunder underthetheLimited LimitedWarranty Warranty ® ® setsetforth forthabove aboveor orhave haveanyanyother otherclaim claimagainst againstAndersen Andersenrelated relatedto toyour yourAndersen Andersen products, products,youyouand andAndersen Andersenagree agreeto toresolve resolvethetheclaim claimusing usingthethefollowing followingprocess process (“Dispute Resolution Process”). This Dispute Resolution Process willwill apply to to claims of of (“Dispute Resolution Process”). This Dispute Resolution Process apply claims anyany nature relating to to your Andersen product (“Dispute(s)”). Disputes include, butbut areare nature relating your Andersen product (“Dispute(s)”). Disputes include, notnot limited to,to, claims forfor breach of of contract or or breach of of warranty, claims forfor violation limited claims breach contract breach warranty, claims violation of ofstate stateor orfederal federallaws lawsor orregulations, regulations,claims claimsbased basedin intort, tort,negligence negligenceor orproduct product liability, claims based in in fraud or or fraud in in thethe inducement, marketing or or advertising liability, claims based fraud fraud inducement, marketing advertising claims claimsand andclaims claimsrelated relatedto tothetheenforceability enforceabilityor oreffect effectof ofanyanyterm termof ofthetheLimited Limited Warranty or or thethe Dispute Resolution Process, including, butbut notnot limited to,to, thethe waivers Warranty Dispute Resolution Process, including, limited waivers of of class action and juryjury trials. class action and trials.
Notice NoticeRequired Required
To Toassert asserta Dispute, a Dispute,youyoumust mustfirst firstprovide provideAndersen Andersenwith withwritten writtennotice. notice.A Notice A Noticeof of Dispute form is available forfor your useuse onon Andersen’s website at at www.andersenwindows. Dispute form is available your Andersen’s website www.andersenwindows. com/noticeofdispute. com/noticeofdispute.
Andersen AndersenResponse Response
Andersen willwill have 6060 days from receipt of of your Notice of of Dispute to to respond to to youyou in in Andersen have days from receipt your Notice Dispute respond writing. In In that response or or at at anyany later time, Andersen may make oneone or or more written writing. that response later time, Andersen may make more written offers to to youyou to to resolve your Dispute. offers resolve your Dispute.
NoNoClass ClassAction ActionororJury JuryTrials Trials
YOU YOUAGREE AGREETHAT THATYOU YOUMAY MAYASSERT ASSERTDISPUTES DISPUTESAGAINST AGAINSTANDERSEN ANDERSENONLY ONLYONONANAN INDIVIDUAL INDIVIDUALBASIS BASISAND ANDNOT NOTASASA PLAINTIFF A PLAINTIFFORORCLASS CLASSMEMBER MEMBERININANY ANYCLASS CLASSOROR REPRESENTATIVE ACTION OROR PROCEEDING. ASAS PART OFOF THIS DISPUTE RESOLUTION REPRESENTATIVE ACTION PROCEEDING. PART THIS DISPUTE RESOLUTION PROCESS, PROCESS,YOU YOUAND ANDANDERSEN ANDERSENALSO ALSOAGREE AGREETOTOWAIVE WAIVEANY ANYRIGHT RIGHTTOTOA JURY A JURYAND AND AGREE AGREETOTOHAVE HAVEALLALLDISPUTES DISPUTESHEARD HEARDAND ANDDECIDED DECIDEDSOLELY SOLELYBYBYTHE THEFEDERAL FEDERALOROR STATE COURT JUDGE. STATE COURT JUDGE.
Opt-Out Opt-OutProcedure Procedure
YouYoumay mayoptoptoutoutof ofthis thisDispute DisputeResolution ResolutionProcess Processbybycompleting completingand andsubmitting submittinga a written Opt-Out Notice. TheThe Opt-Out Notice is is located onon Andersen’s website at at www. written Opt-Out Notice. Opt-Out Notice located Andersen’s website www. andersenwindows.com/optout. andersenwindows.com/optout.Whether Whetheror ornotnotyouyouoptoptoutoutof ofthetheDispute DisputeResolution Resolution Process, allall terms of of thethe Limited Warranty setset forth above remain in in force and effect. Process, terms Limited Warranty forth above remain force and effect.
Applicable ApplicableLaw Lawand andSeverability Severability
This ThisDispute DisputeResolution ResolutionProcess, Process,including, including,butbutnotnotlimited limitedto,to,issues issuesrelated relatedto toitsits enforceability and effect, willwill bebe governed byby thethe laws of of thethe State of of Minnesota without enforceability and effect, governed laws State Minnesota without regard to to conflict of of lawlaw principles. If any term of of this Dispute Resolution Process is is regard conflict principles. If any term this Dispute Resolution Process found to to bebe invalid or or unenforceable in in anyany particular jurisdiction, that term willwill notnot found invalid unenforceable particular jurisdiction, that term apply applyto tothat thatissue issuein inthat thatjurisdiction. jurisdiction.Instead, Instead,that thatterm termwillwillbebesevered severedwith withthethe remaining terms continuing in in fullfull force and effect. remaining terms continuing force and effect.
Questions Questions
If Ifyouyouhave havequestions questionsabout aboutthetheDispute DisputeResolution ResolutionProcess Processor orOpt-Out Opt-OutProcedure, Procedure, contact usus at at 844-332-7972. contact 844-332-7972.
Non-Warranty Non-WarrantyRepair Repair
YouYou willwill bebe responsible forfor allall costs related to to anyany repair that is is notnot covered byby this responsible costs related repair that covered this Limited LimitedWarranty Warrantyor orwhich whichis isoutside outsideof ofthethelimited limitedwarranty warrantyperiod. period.When Whenwarranty warranty coverage coverageis isunclear, unclear,Andersen Andersenmay maycharge chargeananinspection inspectionfeefeeforforanyanyon-site on-siteproduct product ® ® inspection. If the inspector determines thethe Andersen product hashas a defect covered byby inspection. If the inspector determines Andersen product a defect covered this Limited Warranty, thethe inspection feefee willwill bebe waived. this Limited Warranty, inspection waived. “Andersen” andand all all other marks where denoted areare trademarks of Andersen Corporation. “Andersen” other marks where denoted trademarks of Andersen Corporation. ©2015 Andersen Corporation. All All rights reserved. Printed andand effective as as of February 2015. ©2015 Andersen Corporation. rights reserved. Printed effective of February 2015.
291
Combination Design, Product Performance, Installation & Warranty
• •Products notnot manufactured byby Andersen. Products manufactured Andersen. • •TheTheperformance performanceof ofthethelow-maintenance low-maintenanceexterior exteriorglass glasscoating coatingononproducts products ® ® with glass. withHigh-Performance High-PerformanceLow-E4 Low-E4 glass.Performance Performancewillwillvary varydepending dependingonon environmental conditions. environmental conditions. • •Minor Minorwarping warpingof ofwood woodand andclad-wood clad-wooddoors. doors.Andersen Andersenmay maydefer deferactions actionsononanyany claim claimforforwarping warpingforfora period a periodof ofupupto totwelve twelve(12) (12)months monthsfrom fromthethedate dateof ofthethe claim in in order to to permit conditioning and equalization to to humidity and temperature claim order permit conditioning and equalization humidity and temperature conditions. conditions. • •Slight glass curvature, minor scratches or or other imperfections in in thethe glass that dodo Slight glass curvature, minor scratches other imperfections glass that notnot impair structural integrity or or significantly obscure normal vision. impair structural integrity significantly obscure normal vision. • •Rattling of of grille bars within anan airair space. Rattling grille bars within space. • •Insects passing through or or around thethe insect screen. Insects passing through around insect screen. • •Tarnish or or corrosion to to hardware finishes. Tarnish corrosion hardware finishes. • •Special glazings. Contact usus concerning thethe limited warranty onon special glazings. Special glazings. Contact concerning limited warranty special glazings. ® ® • •Andersen artartglass Andersen glassand anddecorative decorativeinsulated insulatedartartglass, glass,impact-resistant impact-resistantglass, glass, electric electricwindow windowoperators, operators,retractable retractableinsect insectscreens screensand andbright brightbrass brassand andsatin satin nickel nickelfinishes finishesonondoor doorhardware. hardware.Contact Contactususor orrefer referto tothethespecific specificlimited limited warranties forfor these products. warranties these products. ® ® ® ® • •Andersen 400 protection Andersen 400Series Serieswindows windowswith withStormwatch Stormwatch protectionand andwith withimpactimpact® ® resistant glass, A-Series windows and doors, E-Series/Eagle windows and doors, resistant glass, A-Series windows and doors, E-Series/Eagle windows and doors, ® ® 100 Series windows and doors, storm doors, Renewal byby Andersen windows, Silver 100 Series windows and doors, storm doors, Renewal Andersen windows, Silver ® ® ® ® ® ® Line windows and doors, American Craftsman windows and doors and Weiland Line windows and doors, American Craftsman windows and doors and Weiland windows and doors have their own limited warranties and areare notnot covered byby this windows and doors have their own limited warranties and covered this limited warranty. limited warranty. • •Service trips to to provide instruction onon product use. Service trips provide instruction product use.
400 SERIES TILT-WASH DOUBLE-HUNG WINDOWS
400 SERIES SPECIALTY WINDOWS Page 121
Page 83
400 SERIES FRENCHWOOD GLIDING PATIO DOORS Page 145 速
200 SERIES NARROLINE GLIDING PATIO DOORS Page 233 速
292
200 SERIES TILT-WASH DOUBLE-HUNG WINDOWS Page 221
400 SERIES AWNING WINDOWS Page 31
400 SERIES CASEMENT WINDOWS Page 31
400 SERIES WOODWRIGHT DOUBLE-HUNG WINDOWS Page 59 ®
400 SERIES GLIDING WINDOWS Page 115
400 SERIES COMPLEMENTARY CURVED TOP PATIO DOORS Page 175
400 SERIES FRENCHWOOD HINGED PATIO DOORS – INSWING ®
Page 153
400 SERIES SPECIALTY WINDOWS Page 121
145 400 Series Frenchwood® Gliding Patio Doors
215 Exterior Trim
153 400 Series Frenchwood® Hinged Patio Doors – Inswing
221 200 Series Tilt-Wash Double-Hung Windows
163 400 Series Frenchwood® Hinged Patio Doors – Outswing
227 200 Series Gliding Windows
171 400 Series Frenchwood® Patio Door Sidelights & Transoms
233 200 Series Narroline® Gliding Patio Doors
213 Art Glass
141 400 Series Complementary Specialty Windows
185 Folding Outswing Doors
247 200 Series Hinged Patio Doors – Inswing
255 Combination Designs, Product Performance, Installation & Warranty
115 400 Series Gliding Windows
49 400 Series Replacement Casement & Awning Windows
191 Entry Doors
121 400 Series Specialty Windows
77 400 Series 59 400 Series 53 400 Series Woodwright® Double-Hung Woodwright® Double-Hung Complementary Insert Windows Full-Frame Windows Casement Windows
83 400 Series Tilt-Wash Double-Hung Full-Frame Windows
94 400 Series Conversion Kit & Combination Unit
95 400 Series Tilt-Wash Double-Hung Insert Windows
10%
Printed on FSC® certified paper manufactured with electricity in the form of renewable energy (wind, hydro and biogas). The cover includes a minimum of 10% post-consumer recovered fiber and the text includes a minimum of 10% post-consumer recovered fiber.
“Andersen” and all other marks where denoted are trademarks of Andersen Corporation. ©2015 Andersen Corporation. All rights reserved. 07/15 Part #2000008
241 200 Series Perma-Shield® Gliding Patio Doors
175 400 Series Complementary Curved Top Patio Doors
101 400 Series Bay & Bow Windows
31 400 Series Casement & Awning Windows