Brief Introduction of LED Solar Street Lamp June 2008
<1>
Contents. I. Overview of process --------- 3 II. Details of steps -------------- 4 III. Completed view ------------- 9
<2>
I. Overview of process Step-1
Installation of Concrete Base
Step-2
Installation of Pole
Step-3
Installation of Rotation Apparatus
Step-4
Installation of Lamp set
Step-5
Installation of Control Box
Step-6
Connecting Control Box with power line
Note) Above process is general process of solar lamp and South Korea. So some modification and change could be happened in case of other lamp & countries. <3>
II. Details of steps â&#x2013;Ł STEP-1. Installation of Concrete Base
( Side View)
( Top View)
â&#x2013;Ł Install concrete base on the road or designated spot like drawings above. Note) Numbers specified above are the case of Korea so it may differ in other countries and rules.
<4>
II. Details of steps ▣ STEP-2. Installation of Pole (Stainless Steel or Steel with color painting)
( Side View)
( Top View)
1) Install metal pole on concrete base. It is recommended to set ‘Hole for system electric line’ facing sidewalk. 2) Fasten metal pole to concrete base with nut. For more secure fastening, metal plate will be inserted between pole and concrete base. <5>
II. Details of steps â&#x2013;Ł STEP-3. Installation of Rotation Apparatus with Solar Panel
â&#x2013;Ł Install rotational apparatus onto electric pole. All electric power lines from rotational apparatus need to be put inside of electric pole.
<6>
II. Details of steps â&#x2013;Ł STEP-4. Installation of LED lamp set(30W/45W/70W) with Pole
â&#x2013;Ł Install LED lamp and arm to the pole. All electric power lines from the lamp need to be put inside of metal pole.
<7>
II. Details of steps ▣ STEP-5. Installation of main control box include battery
▣ Install control box to the pole
▣ STEP-6. Connecting control box with power line
<8>
III. Completed View
<9>