4 minute read
The quiet revolutions in rooflighting
A look behind the scenes at the work of NARM, the National Association of Rooflight Manufacturers
The last two decades have seen huge advances in the design and application of rooflighting, bringing important advances in building performance and safety. Many of these have been the result of intense R&D efforts by leading manufacturers. Behind them has been one supporting organisation that’s driven the changes in UK standards & legislation that have made these improvements a day-to-day reality across all sectors of the construction industry and to the wider public
NARM, the National Association of Rooflight Manufacturers, represents manufacturers and suppliers of all types of rooflights and has played a pivotal role in establishing the effects of rooflighting on building performance and in the development of rooflight standards which protect the marketplace from potentially poorly performing products – as well as promoting best practice among specifiers and installers.
Recognised as the UK’s leading independent and impartial authority on rooflighting, NARM’s Technical Committee comprises a team of leading experts, each having been selected from within NARM member companies, to represent the Association. Their work has underpinned many important developments and continues to inform and support the industry…
The sustainability revolution
Soon after the NARM’s formation in the late 1990s, independent research commissioned by the Association showed that minimal losses in thermal insulation brought about by the installation of rooflights are greatly offset by the energy savings resulting from reduced demand for electric lighting. Recognising the potential for lower carbon emissions resulting from reduced requirements for electric lighting, a NARM campaign was launched to bring these findings to a wider public, using the slogan: For a smaller carbon footprint, add more rooflights.
Since then, NARM has also been instrumental in collecting, analysing and interpreting rooflighting data upon which the evolving rooflighting requirements in The Building Regulations Approved Document L (Conservation of fuel & power), are based.
Further studies commissioned by NARM have highlighted means by which solar overheating in buildings can be controlled, and the potential for greater energy savings through the integration of automatically controlled electric lighting, with natural daylighting.
Thanks to NARM’s pioneering work in the field, the sustainability benefits of increased natural light levels are now widely understood and applied across the built environment.
Today, NARM’s freely available on-line Technical Library contains a wealth of impartial, up-to-date information covering the subject of energy performance in respect of glass, thermoplastic and GRP rooflights.
NARM provides a complete library of freely available technical information on its website at www.narm.org.uk
The safety revolution – for roof workers
Since its inception, NARM has focussed considerable resources on improving the safety of roof workers.
Working on roofs is a high-risk activity because it involves work at height – and falls through fragile materials, such as aged rooflights and asbestos cement roofing sheets, have historically accounted for a high number of deaths and injuries.
To address this issue, the ACR[M]001 ‘Red Book’ test was developed by the Advisory Committee for Roofwork (now Advisory Committee for Roofsafety), drawing on data supplied by NARM – an ACR member organisation. This defines a test for non-fragility which can be applied to any roof assembly, intended to indicate whether the roof can support the instantaneous loads imposed by a person falling or stumbling onto it. It is not a product test but products such as rooflights can be tested as part of a roof assembly. It sets a minimum standard for non-fragility and all professionals involved with roofing should be familiar with it. The Health and Safety Executive and many other prominent roofing trade associations are also member organisations of ACR.
NARM’s on-line Technical Library contains a number of documents covering non-fragility in respect of rooflights, including a handy ‘Quickguide’, which outlines the key points of the ACR[M]001 test and classifications.
The safety revolution – for building occupants
During the last year, NARM has launched a campaign to support the requirement for laminated inner panes on glass rooflights for important safety reasons, bringing pressure on the British Standards Institute for a regulatory amendment.
Current British Standards still permit the use of toughened glass (nonlaminated) for inner panes of glass rooflights in some instances, bringing the risk of shattering and falling glass into the room below. Using laminated glass inner panes significantly reduces this risk and is the reason behind the NARM campaign to ensure all glass rooflights have laminated inner panes, following a number of concerning incidents involving poorly designed or installed glass rooflights (without laminated inner panes).
NARM has published a number of documents on the subject of non-fragility in respect of rooflights. These are available for free download from the NARM website.
NARM has also published a number of technical documents relating to fire safety, including a new ‘Quickguide’ entitled ‘Definition of geometric free area for Smoke Vents4’, published in early 2021.
Continuing progress on many fronts…
The NARM Council, committees and working groups meet regularly on-line, to address current issues and drive new initiatives. As examples, the Association is currently consulting its membership regarding the CPA’s CCPI (Code for Construction Product Information). NARM has also recently published a post-Brexit Statement on the Construction Products Regulation5, and the changes to Product Standards, CE marking and the introduction of UKCA and UKNI marking of products. This document, along with many others, is also available on the NARM website.
NARM represents leading manufacturers and suppliers of all types of rooflights into the UK market and works closely with a number of organisations and other trade associations. NARM is a member of the RIBA CPD Providers’ Network; The Construction Products Association and Eurolux, the European trade association representing rooflight suppliers.
For further information about NARM, please visit:
