Dental Mould - Stock Profiles
Special Order Profiles below are a few of our non-stock designs. See
1/2”
www.bbwood.com for a complete list.
DE168
P
1/2” x 1/2”
Teeth 1/2”, Gap 1/4”
More Dentils pictured on pages 31-35.
1”
DE169
P
3/4” x 1”
Teeth 1”, Gap 3/8”
1-1/2”
DE170
P 5/8” x 1-1/2”
Teeth 3/4”, Gap 3/8”
2”
DE171 3/4” X 2” Teeth 1”; Gap 3/4”
BB1200 P-O-M-C 3/4” x 2”
Teeth 1”, Gap 1/2”
1-5/8”
DE172
P 1/2” x 1-5/8”
Teeth 1”, Gap 1/4”
1”
DE173
P
3/8” x 1”
Teeth 7/8”, Gap 1/4”
Not to Scale
32
P = Poplar
O = Red Oak
C = Cherry
M = Soft Maple
F = Prime FJ Poplar
Crown/Dentil Combinations Shipped Unassembled For a complete list of LCD designs See CDS1x4
www.bbwood.com
LCD8031 9 3/8” Drop x 8 5/8” Projection Featuring CM85, CDS1x4, S4S1x4, CM89, DE170, PM569
LCD8032 8” Drop x 5” Projection Featuring CM83, DE169, CR65
LCD8097 10 1/2” Drop x 6” Projection Featuring CR800, DE171 (alt BB1200), B469
CDS1x4
LCD8090 9” Drop x 9” Projection Featuring CR882, CDS1x4, S4S1x4, CM72, DE172, PM50
Not to Scale
33
Carved Dentil & Panel Cabinet Moulding Stock Profiles
Special Order
Turned Bamboo
1381 1385
3/8” x 3/4” x 34-1/2” 1/2” x 1-1/8” x 34-1/2”
8-5/8” between knuckles
Pearls also available in : 1/4”, 3/8”, 1/2”. Full rounds in 3/16”, 1/4”, 3/8”.
1710
3/16” x 1” x 48”
Pattern repeats 1-1/8”
Pearl Beading
1701
3/16” x 3/8” x 34-1/2”
1711
1/2” x 1” x 48”
1712
3/16” x 1” x 48”
1713
9/16” x 1” x 48”
1715
1/4” x 1-1/4” x 48”
1716
3/16” x 1-1/2” x 48”
Pattern repeats 11/16”
Special Beading
1702
5/16” x 5/8” x 34-1/2”
Pattern repeats 1-3/8”
Rope See page 27 for 8’ lengths of
Rope and more sizes.
1703 1704 1705
3/16” x 3/8” x 48” 3/8” x 3/4” x 48” 1/2” x 1” x 48”
1707
5/16” x 11/16” x 48”
Pattern repeats 1”
Pattern repeats 1-3/16”
Pattern repeats 3-1/4”
1708
3/8” x 3/4” x 48”
Pattern repeats 1-9/16”
Pattern repeats 7/8”
1709
3/8” x 5/8” x 48”
Pattern repeats 5/8”
Not to Scale
34
Mouldings on this page are European Beech or similar Hardwoods
Carved Dentil & Panel Cabinet Moulding Stock Profiles
1731
5/16” x 1-3/8” x 48”
1732
1/4” x 1-3/8” x 48”
1733
5/16” x 1-9/16” x 48”
1734
1/2” x 1-1/4” x 48”
1766
1/2” x 7/8” x 48”
Pattern repeats 1/2”
1718
1/4” x 2” x 48”
Pattern repeats 3/8”
Pattern repeats 2-3/4”
1719
1/4” x 2” x 48”
Pattern repeats 1-7/16”
1722
3/16” x 5/8” x 48”
1723
3/8” x 11/16” x 48”
Pattern repeats 1/2”
Pattern repeats 3/8”
Pattern repeats 7/8”
Pattern repeats 3/4”
Pattern repeats 3/4”
1724
1/4” x 3” x 48”
1730
11/32” x 1” x 48”
Pattern repeats 5/8”
Pattern repeats 3-3/8”
Mouldings on this page are European Beech or similar Hardwoods
Not to Scale
35
Door Header & Cap - Stock Profiles
Special Order Profiles below are a few of our non-stock designs. See
Embossed
www.bbwood.com
TC150
for a complete list. DH190
TC120 1” X 2-1/8”
Bottom projection 1-5/8”
DH99 P 1-1/16” X 5-1/4” TC140 1” X 2-1/8”
DH190 P TC150 P
Bottom projection 1-1/16”
1-1/16” X 5-1/4” 1-3/4” X 2-1/4”
DH190 & TC150 are sold separately
Rabbeted Stool - Stock Profiles
BB1164 P-O
BB1163 P-O-M-C
Not to Scale
36
BB1165 P-O-M
P = Poplar
O = Red Oak
5/8” x 2-1/4”
1-1/16” x 3-1/4”
3/4” x 3-1/4”
C = Cherry
M = Soft Maple
F = Prime FJ Poplar
Bead Board - Stock Profile
Special Order Profiles below are a few of our
Philadelphia Fence
non-stock designs. See
www.bbwood.com for a complete list.
BB990
P-O-M-C
5/16” x 3-7/16”
Reversible - Beaded or V-Joint Can be custom quoted in any width
Mantle Mould - Stock Profile
MM187 P 1-1/4” x 4-3/8”
BB800 P-O 1-5/16” x 5-1/2”
Bar Mould - Stock Profile
BR12WR
1-5/16” X 4-1/4”
1/2”
BB8200 O-M
1-3/4” x 5-3/4”
BR1CS O-P
1-3/4” x 6-1/4”
Cut out for 1/2” Plywood Cut out for 3/4” Plywood
P = Poplar
O = Red Oak
C = Cherry
Not to Scale
M = Soft Maple
F = Prime FJ Poplar
37
Lattice
Parting Stop
BB254 P-O-M-C 1/2” x 3/4”
Squares
BB265 P-O-M-C 3/8” x 1-3/4”
BB267 P-O-M-C 3/8” x 1-3/8”
Mullions
BB235 BB236 BB237 BB239
P-O-M-C 1-3/4” x 1-3/4” 1-1/2” x 1-1/2” 1-1/4” x 1-1/4” 3/4” x 3/4”
P-O-M-C BB956 1/4” x 2” BB957A 1/4” x 1-3/8” BB957 1/4” x 1-3/4” BB958 1/4” x 2-1/2” BB959 1/4” x 5-1/2”
S4S Boards - Stock PVC boards are stocked in 3/4” (18’0” long) & 1” (20’0” long). Widths range from 3-1/2” to 47-1/2”. Sheets also stocked in 4’0” x 9’0” in 3/8”, 3/4” & 1”. S4S FLEX is available and shown on page 45.
Boards are moulded on 4-sides (some current stock is surfaced 3-sides ripped 1 edge)
Boards are stocked in:
Special Order:
Red Oak Mahogany Hard Maple Douglas Fir Poplar Hickory Walnut Sapele Soft Maple Ash Alder European Beech Cherry White Oak Knotty Alder Lengths (depending on specie) are from 8’ to 16’. Thicknesses include 3/4”, 1-1/16”, 1-5/16” and 1-3/4”; Widths from 1-5/8”, 2-1/2”, 3-1/2”, 5-1/2”, 7-1/4”, 9-1/4” and 11-1/4” (11-1/4” boards may be glued up in some species). All species are not stocked in all sizes. Custom sizes are available.
Frames, Jambs, Sills & Brickmould - Stock Frames
Oak Sill
Jambs
Brickmold
Oak Threshold
Not to Scale
38
P = Poplar
O = Red Oak
C = Cherry
M = Soft Maple
F = Prime FJ Poplar
Shoe
Cove
Stringer
Special Order Profiles below are a few of our non-stock designs. See
www.bbwood.com for a complete list.
BB918 P-O-M-C 9/16” x 1-1/16”
BB100 P-O-M-C 11/16” x 11/16” B8095 O 1/2” X 3/4”
BB129 P-O-M-C 7/16” x 11/16” BB21 F
Panel Mold
Outside Corner
BB205 P-O-M-C 1-1/8” x 1-1/8”
BB206 P-O-M-C 3/4” x 3/4”
OS101 P 13/16” x 13/16”
Head Mould
Quarter Round
Half Round
Screen
BB123 P-O 5/16” x 5/8”
BB142 P-O-M-C 1/4” x 3/4”
BB160 P-O-M-C 9/16” x 1-3/16”
BB105 P-O-M-C 3/4” x 3/4”
OS102 P 13/16” x 1 3/8”
Full Round
BB204
1-1/8” X 1-1/8”
PM586 P 3/4” x 1-1/2” MLD5824 M-C 1/2” x 1” MLD5822 M-C 3/4” x 1-1/2” MLD5820 M-C 1” x 2” MLD series 8’ long
BB120 P-O 1/2” x 1”
Glass Beads/Panel Mould 13/16”
1/4”
BC2CS 1” x 2”
BB147
BB145
1/2” x 9/16”
3/8” x 7/16”
BB148
BB146
1/2” x 11/16”
3/8” x 11/16”
P-O-M-C
P-O-M
P = Poplar
P-O
BB132 P-O-M
5/8” x 3/4”
P-O
O = Red Oak
C = Cherry
M = Soft Maple
BC3CS
1-1/16” x 2-1/4”
BB149 P-O-M-C 13/32” x 11/32” BB144 P-O-M-C 7/16” x 19/32” PM537 P 1/2” x 1/2”
F = Prime FJ Poplar
PM530 P
3/4” x 1-1/8”
PM561 P 3/4” x 3/4”
Not to Scale
39
Special Order
CB1
Allow 4” over base height. For bases up to 3/4” thick
Base/Plinth Blocks - Stock Profile
PB171 P-O
CB2
Allow 4” over base height. For bases up to 1” thick
PB192 P-O
3” x 5”
3” x 5”
PB170 P-O
PB193 P-O
PB183 P-O
PB185 P-O
PB187 P-O
PB186 P-O
4” x 7”
4” x 7”
4-1/2” x 8”
Above Blocks 9-1/4” H P-O-M-C B238 15/16” x 2-3/8” B258 15/16” x 2-5/8” B358 1-1/8” x 3-5/8” B4 1-1/8” x 4” B538 1-1/8” x 5-3/8”
4-1/2” x 8”
5-1/2” x 8”
5-1/2” x 8”
Base Corner Blocks
B-series base blocks can be ordered with a circle design. Specify B#-CIR
CB3
Allow 2-3/4” over base height. For bases up to 1-1/8” thick
CB4
Allow 2” over base height. For bases up to 1-1/8” thick
Custom Corners
Base Corners
Top View
for use with 3/4” radius drywall
Inside Corner (IC)
Standard & 3/4” Radius Outside Corner (OC)
P-O R610 (BB610, BB614) P-O R620 (BB620, BB622) P-O LBR001 P (accepts bases up to 3/4” x 8”)
40
Not to Scale
P = Poplar
O = Red Oak
C = Cherry
Model Base Block Size Height
IC/OC-35 IC/OC-42 IC/OC-55
M = Soft Maple
3½” 4” 4¼” 4¾” 5½” 6”
F = Prime FJ Poplar
Corner Blocks - Stock Profile
Special Order For PLAIN “C” series with edge detail only. Specify (-P). ex. C538-P
E1
P-O-M-C
C358-C
1-1/8” x 3-5/8”
C538-C
P-O-M-C
C4-C
1-1/8” x 4”
P-O-M-C
C238-C
P-O-M-C
C258-C
P-O-M-C
15/16” x 2-3/8”
1-1/8” x 5-3/8”
E2
15/16” x 2-5/8”
E6
E-8
ROS162 P-O 1” x 2-3/4”
ROS169 P-O
ROS161 P-O
ROS160 P-O
ROS159 P-O
1” x 3-3/4” x 5-3/4”
ROS158 P-O
ROS163 P-O
1” x 4-1/2” x 6-1/2”
ROS164 P-O
1” x 3-1/2”
ROS166 P-O
1” x 3-3/4” 1” x 4”
ROS167 P-O
7/8” x 2-3/4” 7/8” x 3-1/2”
7/8” x 3-3/4”
E-SQ
1” x 4-1/2”
ROS168 P-O
ROS165 P-O
1” x 5-1/2” x 7-1/2”
1” x 5-1/2”
Rainbow Corner Blocks R356
P-O 11/16” x 2-3/8” for use use with withBB371 BB356Casing Casing
R371
P-O 11/16” x 2-5/8”
R445
P-O 11/16” x 3-3/8”
for use with BB371 Casing for use with BB445 Casing
Blocks are made as shadow corners (made thicker & wider than casing). Call for quote for blocks that match casing.
P = Poplar
O = Red Oak
C = Cherry
M = Soft Maple
F = Prime FJ Poplar
Not to Scale
41
Keystones - Stock Profile
Special Order Profiles below are a few of our
Key 031 P-O
C
non-stock designs. See
A=1”; B=2”; C=4”; D=4-1/2”
www.bbwood.com
Fits casings up to 13/16” x 2-1/2” to 3-1/2”
for a complete list.
Key 032 P-O
D
A=1”; B=2-1/2”; C=4-1/2”; D=5”
Fits casings up to 13/16” x 3-1/2” to 4”
B KEY with CIRCLE
Key 033 P-O
A
A=1-3/4”; B=3”; C=5-1/2”; D=6”
Fits casings up to 1-1/2” x 4” to 5-1/2”
Stock Urethane Keystones K6: A=1-7/8; B=2-3/4; C=4-1/2; D=6-3/8 K7: A=2-1/2; B=4; C=5-7/8; D=7-1/4 K8: A=1-1/4; B=5-3/4; C=9-3/4; D=7-3/4 K11: A=2-3/4; B=6-1/4; C=8-1/4; D=10-7/8 K12: A=1-1/4; B=6; C=12; D=11-3/4 K14: A=3; B=6; C=11-3/4; D=14
KEY with FLUTES
Special -
KEY 034 Resin Keystone Available in standard and Oak Grain B=4”; C=6-1/2”; D=8” will fit casings up to 1-1/2” x 4-1/2” to 7”
MiterLESS Parts
CRV5127 2-1/2" x 8" x 9-1/2" accepts casings up to 6-1/2" wide
Crown Radius Outside Corner
Crown Radius Inside Corner
Not to Scale
42
P = Poplar
O = Red Oak
C = Cherry
M = Soft Maple
F = Prime FJ Poplar
Crown (Pinch) Blocks - for BB40, BB46, BB49
Special Order Profiles below are a few of our non-stock designs. See
www.bbwood.com for a complete list.
CP (center)
IP (inside)
OP (outside)
Current stock (not pictured) has a generic crown. A running change will make Size 3 with BB49, Size 5 with BB46 and Size 7 with BB40. Chart below reflects the new blocks that will be made. A
B
C
D
Face
Accepts up to
3-5/8” Crown
IP3
Inside Corner
2-7/8"
2-5/8"
5-1/2"
2-7/8"
OP3
Outside Corner
2-7/8"
2-5/8"
5-1/2"
2-7/8"
5-3/4"
CP3
Center Room
2-7/8"
2-5/8"
5-1/2"
2-7/8"
5-3/4"
IP5
Inside Corner
3-11/16"
4"
7-11/16"
4-1/16"
OP5
Outside Corner
3-11/16"
4"
7-11/16"
4-1/16"
8-1/8"
CP5
Center Room
3-11/16"
4"
7-11/16"
4-1/16"
8-1/8"
IP7
Inside Corner
5"
5-3/16"
10-3/16"
5-13/16"
OP7
Outside Corner
5"
5-3/16"
10-3/16"
5-13/16"
11-5/8"
CP7
Center Room
5"
5-3/16"
10-3/16"
5-13/16"
11-5/8"
5-1/4” Crown 7-1/4” Crown
Crown (Pinch) Blocks - for CR810 & CR800 Carved Crown Block
D Your Choice of crown and block size
B C CR810
SCB
LCB040 LCB041 LCB042
SCB045 SCB046 SCB047
CR800
A
LCB LCB - Large Crown Blocks with CR800 A B C Inside Corner 5-1/2 6 11-1/2 Outside Corner 5-1/2 6 11-1/2 Center 5-1/2 6 11-1/2 SCB - Small Crown Blocks with CR810 A B C Inside Corner 3-3/4 4-1/4 8 Outside Corner 3-3/4 4-1/4 8 Center 3-3/4 4-1/4 8
CUSTOM D 4-1/2 4-1/2 4-1/2
Face 9 9
D 3-1/4 3-1/4 3-1/4
Face 6-1/2 6-1/2
CRV5095 5-1/2" x 5-1/2" x 12-1/8"
Accepts crowns 5-1/4 to 7-1/2"
CRV5099 3-1/2" x 3-1/2" x 8-1/2" Accepts crowns up to 5"
A = crown height; B = block height; C = total height; D = Projection from wall
SCB will accept the following crowns (also can be made with these crowns for extra cost): Embossed: CM70; CM71; CM72; CM74; CM77; CM81; CM85; CM87 Plain: CR810; CR820; CR864; CR866; CR872; CR881; CO707
LCB will accept the following crowns (also can be made with these crowns for extra cost): Embossed:CM73; CM75; CM76; CM80; CM82; CM83; CM84; CM86 Plain: CR800; CR806; CR830; CR841; CR860; CR862; CR880, CO705
Not to Scale
43
Flexible Resin Mouldings for Curved Applications Interior or Exterior Applications
FLEX is a high density polyurethane resin with a cellular composition structure similar to wood and may be handled the same as wood. FLEX is made in two formulations. Original FLEX is priced in our catalog. ZFlex is an upgrade which is stronger, more durable and offers greater flexibility. Pricing is by quote. Either may be used in interior or exterior applications. FLEX is pre-primed for superior paint and stain adhesion. Many of the profiles are available in long lineal footage. Small, non-radius profiles up to 2” wide can be ordered up to 100’ lengths. Profiles up to 3-1/2” wide are available up to 75’ lengths. Profiles not available in long lineal are mostly available in 12’ lengths with some exceptions. FLEX has an excellent memory. After laying on a flat surface for a short period of time, depending on temperature, it will return to the shape in which it was originally molded, allowing for ease of installation.
I. Casing - by the Lineal Foot (SEGMENT)
OVAL
A
B
INSIDE RADIUS
WIDTH
PAPER or CARD BOARD TEMPLATE NEEDED Length = Measure Template
A. Indicate Length of Molding (sold by the foot)
- Min. 5’ long; Max. 12’ per piece for most profiles B. Specify type of curve (Half Circle, Eyebrow, Ellipse, Gothic, Oval or Round) C. Half Circle-Specify Radius; Eyebrow (segment): Specify height & width of arch. All other designs require a template.
D. Specify Oak Grain or No Grain
(all molds are not available in both grain and no-grain )
E. Order wood Corner blocks.
(Mitered Flex to Wood casing may not exactly match)
F. Many more profiles are available than are shown on the preceding pages. See our web site for a complete list.
II. Crown Mouldings A. Is face of crown convex or concave? B. Indicate radius of curved wall to
D. Specify Oak Grain or No Grain
face of sheet rock. Alternate: Specify width of curve (B) & depth of curve (A) C. Indicate length of Mould (sold by the foot) - Min. 5’ long; Max. 12’ per piece for most profiles
(check availability)
E. Which side of crown is against wall F. Crown resin is not returnable
III. Baseboards, Shoe, Chair Rails & Dentil A. If resin baseboards, chair rails or
dentils are being used as a base or below crown moulding on a wall, then they do not need to be precast to any radius. They are sold as “straights” and only lineal footage is needed.
44
B. Indicate length (sold by the foot) - Min. 5’ long;
C. Specify Oak Grain or No Grain (check for availability)
STOCK LIST BB610 & BB620 No Grain BB105* & BB100* No Grain BB129* No Grain & Oak BB299 No Grain BB907 No Grain *these profiles are not an exact match to our wood profiles
Flexible Resin Mouldings for Curved Applications IV. S4S
Installation Instructions
A. Specify Thickness,Width, Length (min 5’)
All flexible mouldings are sensitive to temperature. At temperatures below 70 degrees, the mouldNo Grain is available up to 2” thick (minimum 3/8”), 12” wide (miniing will become more rigid. At temperatures above one mum 1/2” wide) and 12’0” long. Order widths and thicknesses in 1/16” hundred degrees, the material will soften and tear more increments. Please call for a quote for Oak grain sizes that are not easily than normal. Once installed, the product will listed below. STOCK SIZES S4S: not be affected by extreme temperatures. Extra care is 3/4 X 2 (no grain & oak grain) advisable when installing at very high or low tempera3/4 X 4 (no grain & oak grain) tures. Flex Mouldings can be nailed without pre-drill3/4 X 4½ (no grain only) ing. 3/4 X 5¼ (no grain & oak grain) It is necessary to use a quality construction adhesive 3/4 X 6-9/16 (no grain only) before nailing. Run a continuous line of adhesive when Order widths and thicknesses in 1/4” increments. Thickness other applying. than 1/4” increments can be quoted for an additional milling charge. When parts are received at the job site they Special Order. should be removed from the carton, bent backwards and Machinable Blanks - may be run through your moulder. put in the sun, heated room or oven. FLEX parts have No Grain only: Available up to 2” thick (min 1/2”), 12” wide (min 2” an excellent memory. After thirty to forty-five minutes wide) and 5’ to 12’0” long. Call for quotation. the part will return to the shape it was originally formed and be easier to install. When flattened, base and case mouldings are V. Backbands easy to identify. Crown mouldings have proven to be A. Indicate diameter or radius of main casing and type of curve. confusing for the first time user. Below you will find a B. Indicate length of Mould (sold by the foot) drawing showing how to tell concave from convex pre- Min. 5’ long; Max. 12’ per piece for most profiles formed crown mouldings. Concave pre-formed crown C. Specify Oak Grain or No Grain mouldings appear to be formed upside down. Upon (check for availability) installation you will discover they are made correctly and will fit properly. • Using adhesive, mastic or resin epoxy glue alone produces best fastening results • The best fastening way is to nail through a block of wood placed over face of moulding and remove nail and block after adhesive cures • Surface protrusion defects can occur if nails are paced too close to edges. To Paint • Surface depression defects can occur if nails are not deep enough or at least 1/3 of material thickness depth. Wipe surface clean with paint thinner or mild solvent. Sand lightly. If using filler use hard plastic resin filler and sand. Do not paint • Glue joints with any fast cure resin or epoxy glue before installation. All paints work well. • Do not use wood glue • Repair cracks or breaks with epoxy glue To Stain S4S - may be used in curved jamb, baseboard or chair rail applications.
For radius S4S see bbwood.com for sizes.
Finishing Flex Mouldings
Stain-Grade is the same composition as the smooth paint grade. The wood grain pattern allows FLEX to be finished to match wood mouldings in various hardwoods. Gelled stains or those with heavy pigments work best. Some traditional wood stains will not provide a quality job. We strongly recommend that first-time users practice on a piece of scrap FLEX before applying a finished coat. 1. Clean surface prior to staining 2. Fill nail holes prior to staining with resin filler. 3. Wipe on stain and remove excess with cloth and dry brush color light or dark. 4. Clear coat over stain using spray application only. 5. Do not brush or sand between coats. 6. Achieving light natural wood colors may require stain tinting and glazing techniques.
For a convex application the detail going against the wall will be on the bottom of the arch, when viewed as illustrated below.
CONVEX Viewed on a flat surface
For a concave application the detail will be on the top of the arch, when viewed as illustrated below.
CONCAVE Viewed on a flat surface
45
Special Order Profiles below are a few of our non-stock designs. See
www.bbwood.com for a complete list.
Urethane Mouldings - Interior or Exterior: Stock Urethane mouldings have an exterior grade white primer paint with a built-in ultraviolet stabilizer. May be painted with any good quality latex or oil base paint. One coat is typically all that is needed. Cut and trim with typical woodworking tools. Install similar to any premium wood trim with these exceptions. To minimize expansion/contraction cut moulding 1/4” longer for each 10’ of length. Use butt joints on seams and miter joints at the corners. Do not store in extreme heat. Acclimate before installation (at least 10 hours) Use a top quality, urethane construction adhesive such as PL Premium Adhesive for installation. Use on all joints (covering the joints completely) and along the back of the moulding. Use corrosionresistant mechanical fasteners (nails or screws) and fasten every 16” or less for exterior applications. Countersink fasteners about 1/8” and fill with exterior grade white spackle. Finish Exterior installations using a quality exterior grade silicone caulk to prevent water infiltrations behind siding, windows and doors. J-channel and/or flashing may be required to prevent water infiltration. Installers must determine which installation technique is best for their situation. Wood or automotive filler can be used to fill dents or gashes. Check local building codes for altered installation procedures.
MLD215-12 1-3/4” x 3-1/2”
MLD207-16 1” x 5-1/4” x 16’0”
MLD208-16 1” x 7-1/4” x 16’0”
MLD227-16 1-1/2” x 9”
Not to Scale
46
MLD220-12 1-3/4” x 5-1/2” x 12’0”
MLD224-12 1-1/2” x 5-1/2” x 12’0”
MLD226-16 1-1/2” x 5-1/2” x 16’0”
MLD231-12 1” x 1-3/4” x 12’0”
MLD246-16 3-3/8” x 9-1/8” X 16’0”
MLD247-16 1-3/8 x 8-11/16” X 16’0”
Urethane Mouldings - Interior or Exterior: Stock
Special Order Profiles below are a few of our non-stock designs. See
www.bbwood.com for a complete list. 3/4” Tooth & Space
MLD303-5 5/8” x 1-1/4” x 5’0”
2-1/4” Tooth & Space
MLD331-16 1-5/8” x 9-1/2” X 16’0”
1-1/4” Tooth & Space
MLD304-8 5/8” x 1-1/4” x 8’0”
2-3/4” Tooth & Space
MLD333-12 1-3/16” x 11-1/2” X 12’0”
Pitched Dentil
MLD310 in 9/12, 10/12, 12/12; MLD320 in 10/12; MLD330 in 10/12; MLD351 in 10/12, 12/12
1-1/2” Tooth & Space
MLD310-16 1-1/4” x 4-1/2” x 16’0”
3-11/16” Tooth; 3-9/16” Space
MLD335-12 3-3/8” x 6-1/8” x 12’0”
1” Tooth & Space
MLD313-8 2-1/4” x 2-3/8” x 8’0”
2-3/16” Tooth; 1-1/2” Space
MLD350-8 7/8” x 3-1/2” x 8’0”
MLD332-8 1-5/8” x 5”
2-1/4” Tooth & Space
MLD320-16 1-5/8” x 5-3/4” x 16’1”
2” Tooth & Space
MLD330-12 1-5/8” x 7” x 12’0”
3-1/2” Tooth & Space
MLD351-8 1-1/4” x 3-1/4” x 8’0”
MLD336-16 3-1/8” x 9-3/8” 1-3/8” Tooth; 3/4” Space
MLD355-8 5/8” x 2-1/2” x 8’0”
Not to Scale
47
Special Order
Urethane Mouldings - Interior or Exterior: Stock
Profiles below are a few of our non-stock designs. See
www.bbwood.com for a complete list.
3/4” Tooth & Space
MLD404-16 2-1/2” x 3-3/4” x 16’0”
3/4” Tooth; 1-1/4” Space
MLD454-12 3-25/32” x 3-15/16” x 12’0”
MLD406-16 3-3/8” x 4” x 16’0”
MLD456-16 3” x 4-7/16” x 16’0”
1-1/2” Tooth & Space
MLD460-12 4-3/8” x 5-1/8” x 12’0”
MLD253-16 2-3/8” x 7-5/8”
MLD410-12 3-3/4” x 6-7/8” X 12’0”
MLD561-12 1-1/2” x 3-1/4”
MLD452-12 2” x 3” X 12’0”
MLD453-16 Not to Scale
48
4-11/16” x 6-11/16” x 16’0”
MLD527-16 3-1/2” x 7-1/2” x 16’0”
MLD542-16 2-3/4” x 5-1/2” x 16’0”
Urethane Mouldings - Interior or Exterior: Stock
Special Order Profiles below are a few of our non-stock designs. See
www.bbwood.com for a complete list.
MLD552-12
2-1/8” x 3-7/16” X 12’0”
MLD570-12 5-1/2” x 6-7/8” X 12’0”
MLD602-8 13/16” x 13/16” x 8’0”
MLD611-12 1-1/8” x 2-1/4” x 12’0”
MLD612-12 3/4” x 1-3/8” x 12’0”
MLD230-16 3/4” x 3-1/4”
MLD618-16 15/16” x 1-9/16” X 16’0” MLD244-12 1-5/16” x 5-5/8”
MLD603-8 1/2” x 1/2” x 8’0”
MLD610-8 1-1/2” x 2-3/8” x 8’0”
MLD626-8 1-1/32” x 1-3/16” X 8’0”
MLD648-16 1-1/2” x 1-1/16” x 16’0”
MLD250-8,12 1-3/4” x 4-1/2”
Not to Scale
49
NUMERICAL INDEX
50
Item
Page
Item
Page
Item
Page
Item
Page
Item
Page
Item
Page
1381
34
BB18
9
BB350
14
BB8110
9
CH690
14
CR64
15
1385
34
BB21
39
BB356
4
BB8111
9
CH693
15
CR65
15
1701
34
BB40
20
BB361
4
BB8120
9
CH7CS
15
CR66
15
1702
34
BB45
17
BB371
4
BB8122
9
CH8CS
15
CR67
14
1703
34
BB46
18
BB400
8
BB8200
37
CM69
17
CR68
9
1704
34
BB49
16
BB400
15
BC2CS
39
CM70
17
CR69
14
1705
27
BB54
16
BB412
8
BC3CS
39
CM71
17
CR800
20
1705
34
BB75
16
BB445
4
BOARD
38
CM72
17
CR810
17
1707
34
BB95
39
BB448
4
BR1CS
37
CM73
19
CR820
16
1708
34
BB100
39
BB450
7
C238-C
41
CM74
17
CR830
18
1709
34
BB102
4
BB460
4
C258-C
41
CM75
19
CR840
16
1710
34
BB105
39
BB471
4
C358-C
41
CM76
19
CR841
20
1711
34
BB120
39
BB472
4
C4-C
41
CM77
17
CR850
16
1712
34
BB123
39
BB475
7
C538-C
41
CM80
19
CR860
20
1713
34
BB129
39
BB480
5
CA30
6
CM81
17
CR862
19
1715
34
BB132
39
BB490
5
CA31
6
CM82
19
CR864
19
1716
34
BB142
39
BB500
7
CA33
6
CM83
19
CR866
17
1718
35
BB144
39
BB575
7
CA36
6
CM84
19
CR872
16
1719
35
BB145
39
BB610
11
CA37
6
CM85
17
CR880
18
1722
35
BB146
39
BB614
10
CA38
6
CM86
19
CRV5095
43
1723
35
BB147
39
BB620
10
CA39
6
CM87
19
CRV5099
43
1724
35
BB148
39
BB622
10
CA40
6
CM88
17
CRV5127
42
1730
35
BB149
39
BB640
11
CA41
6
CM89
17
CSCR59
20
1731
35
BB150
27
BB645
12
CA300
4
CM90
19
DE168
32
1732
35
BB152
27
BB664
10
CA302
5
CM91
17
DE169
32
1733
35
BB153
9
BB675
11
CA323
7
CM8801
21
DE170
32
1734
35
BB154
27
BB685
4
CA325
7
CM8808
21
DE171
32
1766
35
BB155
9
BB695
11
CA326
7
CM8810
21
DE172
32
B15CS
11
BB156
27
BB700
11
CA327
7
CM8812
21
DE173
32
B17CS
11
BB160
39
BB714
10
CA328
8
CM8820
21
DH190
36
B238
40
BB204
39
BB750
5
CA329
8
CM8823
21
DH99
36
B258
40
BB205
39
BB750
11
CA335
4
CM8825
21
DS110
8
B358
40
BB206
39
BB753
5
CA342
5
CM8830
21
DS111
8
B4
40
BB219
26
BB753
10
CA344
5
CM8834
21
E1
41
B400
11
BB220
10
BB775
12
CA360
5
CM8837
21
E2
41
B401
12
BB235
38
BB800
37
CA363
5
CM8840
21
E6
41
B435
10
BB236
38
BB886
8
CA368
5
CM8850
21
E8
41
B442
12
BB237
38
BB907
8
CA380
5
CM8852
21
E-SQ
41
B462
12
BB239
38
BB918
39
CA388
5
CM8854
21
FR8920
23
B464
12
BB254
38
BB956
38
CA8320
6
CM8856
21
FR8921
23
B468
11
BB265
38
BB957
38
CA8322
6
CM8857
21
FR8922
23
B4CS
12
BB267
38
BB957A
38
CA8338
6
CM8858
21
FR8923
23
B538
40
BB278
9
BB958
38
CB1
40
CM8859
21
FR8940
23
B7CS
11
BB280
9
BB959
38
CB2
40
CM8860
21
FR8950
23
BA42
13
BB282
9
BB990
37
CB3
40
CO705
18
FR8953
23
BA43-C
13
BB283
9
BB1163
36
CB4
40
CO707
16
FR8954
23
BA44
13
BB297
14
BB1164
36
CDS1X4
33
CO730
16
FR8955
23
BA46
13
BB299
14
BB1165
36
CH5CS
15
CP-3
43
FR8956
23
BA47
13
BB300
14
BB1200
32
CH610
14
CP-5
43
FR8957
23
BB15
9
BB312
10
BB7613
12
CH640
14
CP-7
43
FR8960
23
BB16
9
BB324
4
BB7615
12
CH650
14
CR61
15
FR8965
23
BB17
9
BB340
4
BB8109
9
CH659
14
CR63-A
15
FR8967
23
NUMERICAL INDEX FR8968
23
Item
Page
Item
Page
Item
Page
Item
Page
Item
Page
FR8970
23
MLD207-16
46
MLD5822
39
MLD610-8
49
PM486
27
R610
40
FR8971
23
MLD208-16
46
MLD5824
39
MLD611-12
49
PM490
27
R620
40
HABA062
12
MLD215-12
46
MLD5840
22
MLD612-12
49
PM492
27
RB3
5
HABA066
12
MLD220-12
46
MLD5842
22
MLD618-8
49
PM494
27
RE104
27
HABA218
12
MLD224-12
46
MLD5844
22
MLD626-8
49
PM495
27
RE107
27
HABA264
12
MLD226-16
46
MLD5846
22
MLD648-16
49
PM500
27
Rope038
27
HABA304
12
MLD227-16
46
MLD5848
22
MM187
37
PM505
26
Rope012
27
HACA052
4
MLD230-16
49
MLD5860
22
OP-3
43
PM511
26
Rope034
27
HACA082
4
MLD231-12
46
MLD5864
16
OP-5
43
PM525
26
Rope100
27
HACA091
5
MLD244-12
49
MLD5866
16
OP-7
43
PM526
26
Rope114
27
HACA101
11
MLD246-16
46
MLD5900
24
OS101
39
PM529
26
Rope112
27
HACA115
7
MLD247-16
46
MLD5902
24
OS102
39
PM530
39
Rope200
27
HACA134
5
MLD250-8,12
49
MLD5903
24
PB170
40
PM535
26
Rope214
27
HACA221
4
MLD253-16
48
MLD5910
24
PB171
40
PM537
39
Rope300
27
HACA288
5
MLD303-5
47
MLD5912
24
PB183
40
PM539
26
Rope400
27
HACA305
7
MLD304-8
47
MLD5914
25
PB185
40
PM561
39
ROS158
41
HACA346
4
MLD310-16
47
MLD5916
25
PB186
40
PM56-B
29
ROS159
41
HAMA165
26
MLD313-8
47
MLD5918
25
PB187
40
PM570
26
ROS160
41
IC/OC-35
40
MLD320-16
47
MLD5920
25
PB192
40
PM580
26
ROS161
41
IC/OC-42
40
MLD330-12
47
MLD5922
24
PB193
40
PM586
39
ROS162
41
IC/OC-55
40
MLD331-16
47
MLD5924
25
PM07
28
PM590
26
ROS163
41
IP-3
43
MLD332-8
47
MLD5926
25
PM08
28
PM593
26
ROS164
41
IP-5
43
MLD333-12
47
MLD5928
25
PM09
28
PM597
26
ROS165
41
IP-7
43
MLD335-12
47
MLD5940
31
PM10
28
PM8511
30
ROS166
41
K11
42
MLD336-16
47
MLD5942
31
PM11
28
PM8520
30
ROS167
41
K12
42
MLD350-8
47
MLD5944
31
PM12
28
PM8522
30
ROS168
41
K14
42
MLD351-8
47
MLD5946
25
PM14
28
PM8523
30
ROS169
41
K6
42
MLD355-8
47
MLD5949
31
PM20
28
PM8524
30
SCB045
43
K7
42
MLD404-16
48
MLD5950
31
PM22
28
PM8525
30
SCB046
43
K8
42
MLD406-16
48
MLD5952
31
PM22-PL
13
PM8528
30
SCB047
43
KEY 031
42
MLD410-12
48
MLD5954
31
PM22-PL
28
PM8532
30
TC120
36
KEY 032
42
MLD452-12
48
MLD5956
31
PM23-B
28
PM8535
30
TC140
36
KEY 033
42
MLD453-16
48
MLD5958
25
PM24
28
PM8536
30
TC150
36
KEY 034
42
MLD454-12
48
MLD5960
31
PM25
29
PM8540
30
LBR001
40
MLD456-16
48
MLD5962
24
PM26
29
PM8541
30
LCB040
43
MLD460-12
48
MLD5964
31
PM27
29
PM8545
30
LCB041
43
MLD527-16
48
MLD5966
31
PM28
29
PM8546
30
LCB042
43
MLD542-16
48
MLD5968
31
PM29
29
PM8552
30
LCD8031
33
MLD552-12
49
MLD5970
31
PM50
29
PM8553
30
LCD8032
33
MLD561-12
48
MLD5972
31
PM52
29
PM8555
30
LCD8097
33
MLD5610
27
MLD5976
31
PM54
29
PM8557
30
LCD8090
33
MLD5612
27
MLD5978
31
PM55
29
PM8558
30
LM90
24
MLD5614
27
MLD5979
31
PM57
29
PM8560
30
LM91
24
MLD5616
27
MLD5980
31
PM58
29
PM8561
30
LM92
24
MLD570-12
49
MLD5982
31
PM59
29
PM8564
30
LM93
24
MLD5800
27
MLD5986
31
PM70
29
PM8565
30
M312
5
MLD5802
27
MLD6000
31
PM71
29
PM8568
30
M313
7
MLD5804
27
MLD6002
31
PM72
29
PM8569
30
M3TB
4
MLD5810
27
MLD6004
31
PM73
29
PM8572
30
MA20
4
MLD5812
27
MLD6005
31
PM74
29
R356
41
MA30
5
MLD5814
27
MLD602-8
49
PM484
27
R371
41
MD4316
17
MLD5820
39
MLD603-8
49
PM485
26
R445
41
51