Aquis Vinyl Plank Flooring Installation Guide

Hard Set Adhesive Fixed Method.

• Aquis Vinyl Plank Flooring should only be installed by a licensed professional installer.

• It is the responsibility of the owner to select the method of installation.

• The installer must have a thorough understanding of the installation process and materials to be used.

• The owner must be satisfied with the ability of the installer.

• Site inspection must be performed prior to installation.

• The owner or installer must be satisfied that site conditions are appropriate for the installation of this product.

Due to site conditions or environmental conditions other methods of installation may be applicable. It is the owners / installer responsibility to determine which method is suitable.

Adhesive: (Hard Set Adhesive Fixed Method)

• It is the responsibility of the owner / installer to select the appropriate glue to be used for installation.

• Read carefully the adhesive manufacturers instructions and make sure it is suitable to be used.

• If you are satisfied with the glue chosen, follow the instructions carefully.

Site conditions must be considered when choosing the appropriate glue and installation method.

Aquis Vinyl Plank can be used in:

• Residential & light traffic commercial use only.

• Aquis Vinyl Plank Flooring can be installed where there is underfloor heating. This warranty will not cover any issues caused by underfloor heating.

• Aquis Vinyl Plank can be used in wet areas (kitchen, laundry, toilet, bathroom). We do not recommend this product to be used in the shower recess.

Floor Preparation:

• Please follow the guidelines set out in Australian Building Regulations, AS 1884-2021

Pre-installation of Aquis Vinyl Plank:

• Aquis Vinyl Planks are manufactured to a high standard in terms of quality, stability and accuracy.

• It is the responsibility of the owner / installer to examine each plank carefully to make sure there are no visible defects in the planks.

• Defective product should be removed and not installed. Notify the seller of any defective product immediately.

• Some planks with small damage may be used in ‘off-cut positions’ where full planks are not required.

• Once the product has been installed it is deemed that the product has been accepted by the installer / owner.

Handy tips to assist installation:

Tools: • 2-3m straight edge, chalk line, string line, commercial grade cutting knife, square, tape measure, hand roller, double sided tape.

Tips: • Use a good quality knife with solid blade. Cut away from yourself. Mark the face of the plank. Cut / score the face of the plank.

• Use personal protective equipment (ears, nose, mouth and eyes) as needed. Use knee protection.

• Ensure the site is suitably ventilated.

• Ensure there is adequate light to perform the installation.

It is the responsibility of the owner / installer to ensure that all site safety rules are followed when performing the installation.

It is the responsibility of the owner / installer to perform the installation in a safe manner to minimise any possibility of injury.

Aquis Vinyl Plank Flooring

Proudly imported by UB Trading Pty Ltd.

For further information please visit: www.ubtrading.com.au

Contact: info@ubtrading.com.au