HOW TO APPLY:
APPLICATION INSTRUCTIONS
1:
Prep the nails as usual. Cleanse the nail very well with wiping solution. Wait for nails to be completely dry. (Chalky finish)
2:
Apply a thin coat of Gelacquer LED basecoat to all 10 nails and then cure under LED light for 10 seconds; 30 seconds with UV lamp.
3:
Remove the residue after it is completely cured with a wiping solution and let dry.
4:
Apply a thin coat of desired color to all 10 nails. Cure under LED light for 10 seconds; 30 seconds with UV lamp.
5:
Repeat Step 4 if color needs to be darker.
6:
Apply Gelacquer topcoat to all 10 nails. Remove sticky residue after completely cured. Cure under LED light for 10 seconds; 30 seconds with UV lamp.
HOW TO REMOVE: 1:
Buff the shine off the surface of the nails.
2:
Wet cotton with acetone, wrap around the nail and cover with kitchen foil. Wait for a few minutes, then remove wrap one by one.
3:
Take an orange wood stick and gently push on the loosened gel downwards.
***The gel does not disintegrate in the acetone like acrylic polymer/powder does, it softens with acetone.*** 4:
Gently condition the nails with cuticle oil or lotion.