BEC
Best Equipment Center www.bec-vet.com
ORTHOPEDICS
CATALOG
Vol. 02 Edit : 01/2021
ขอสงวนสิทธิ์ในการเปลี่ยนแปลงเงื่อนไขโดยไม่ต้องแจ้งล่วงหน้า BEC reserves the right to change without prior notice
www.bec-vet.com
Scan QR Code ดูสินค้าในช่องทางออนไลน์
บริษัท เบสท์ อีควิปเม้นท์ เซ็นเตอร์ จำ�กัด 61/232, 638 หมู่ 6 ถนนกาญจนาภิเษก ตำ�บลเสาธงหิน อำ�เภอบางใหญ่ นนทบุรี 11140
“BEC will be the preferred supplier in the veterinary business”
ORTHOPEDICS Orthopedics Set Basic Kits Pin & Cerclage Wire Plate Set Screw / Pin / Plate
1 - 2 3 4 - 14
Joint Surgery & Miscellaneous
15
Retractor / Elevator
16
Saw / Cutter / Rasp
17
Bone Forceps
18 - 19
Wire & Pin Instrument
20 - 21
Chisel / Osteotome / Mallet
22
Trauma Implants & Intruments
23 - 28
Sair
31 - 33
Vet Instrument
34 - 40
Category
ORTHOPEDICS SET BASIC KITS PIN & CERCLAGE WIRE
01-140663
45-182522
10-001360.2
45-98182813
02-28.0374.13
45-177318
45-180922
45-184115
45-183017
45-181521
45-181316
45-180863
45-181213
45-181404 / 45-181408 / 45-181410
45-180808 45-180810 45-180812 45-180814 45-180816 45-180818 45-180820 45-180822 45-180825 45-180830
1
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
ORTHOPEDICS SET BASIC KITS PIN & CERCLAGE WIRE
Orthopedics
Set Basic Kits Pin & Cerclage Wire 01-140663 Retractor Gelpi, 18 cm 45-98182813 Bone Reduction Forceps Pointed (Length : 135 mm) x2 45-183017 Bone Reduction Forceps Setter (Length : 160 mm) x2 45-184115
5.0 mm Luer Rongeur, Length 140 mm, curved
45-182522 Chisel Stille (Length : 200 mm, Width : 10 mm) 33-002
02-28.0374.13 Volkmann Bone Spoon Double Ended 45-177318 Lewis Rasp - Fine serration (Length : 180 mm) 45-181521 Wire Passer (Length : 210 mm)
45-182310
45-182310
Patella Luxation Saw
45-181316
Wire Bender - Cutters (Length : 160mm)
45-181213 Wire Extraction Forceps (Length : 130 mm) 45-181011 K wire bender 10-001360.2 Pin Punch 4 mm 45-180484 Orthopaedic Mallet Bergmann (Length : 240 mm, Weight : 300 g) 10-001231/A Implant cutter stainless to 4 mm capacity
45-180484
45-180922 Compound Action Implant Cutter (TC), Length : 220 mm 45-180863
Hand Chuck
45-181404 Orthopaedic Wire, 0.4 mm, Length : 10 m 45-181408 Orthopaedic Wire, 0.8 mm, Length : 10 m 45-181410 Orthopaedic Wire, 1.0 mm, Length : 10 m 45-180808 Steinman Intramedullary Pin (Length : 310 mm, 0.8 mm) x5 45-180810 Steinman Intramedullary Pin (Length : 310 mm, 1.0 mm) x5 45-180812 Steinman Intramedullary Pin (Length : 310 mm, 1.2 mm) x5 45-180814 Steinman Intramedullary Pin (Length : 310 mm, 1.4 mm) x5 45-180816 Steinman Intramedullary Pin (Length : 310 mm, 1.6 mm) x5 45-180818 Steinman Intramedullary Pin (Length : 310 mm, 1.8 mm) x5 10-001231/A
45-180820 Steinman Intramedullary Pin (Length : 310 mm, 2.0 mm) x5 45-180822 Steinman Intramedullary Pin (Length : 310 mm, 2.2 mm) x5 45-180825 Steinman Intramedullary Pin (Length : 310 mm, 2.5 mm) x5 45-180830 Steinman Intramedullary Pin (Length : 310 mm, 3.0 mm) x5 33-002 ถุงใส่ Pin
45-181011
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
2
PLATE SET
10-TD0015, 10-TD0020, 10-TS00027, 10-TS12535 10-QRCS01 21-DRL-15-060, 21-DRL-20-110, 10-090112, 21-DRL-27-150
45-187215
45-98187225
45-98189207
45-98188442
45-98188444
21-DRL-15-060
Standard Economy Drill bit 1.5 mm 60 mm long
N2
21-DRL-20-110
Standard Economy Drill bit 2.0 mm 110 mm longmm)
N2
10-090112
Drill Bits soft, DIA : 25 mm, Length : 127 mm
21-DRL-27-150
Standard Economy Drill bit 2.7 mm 150 mm long
10-TD0015
1.5 mm Cortical Taps (Dentalfir)
10-TD0020
2.0 mm Cortical Taps (Dentalfir)
10-TS00027
Quick Release Taps 2.7 mm Cortical Taps
10-TS12535
Quick Retease Taps 2.5 mm Cortical Taps
10-QRCS01
Handle for 2.4, 2.7, 3.5, 4.0, 4.5 Tap Synthes fit 75
45-187215
Hex Screwdriver, For 1.5 to 2.4 mm screws (1.5 mm hex tip)
45-98187225
Hex Screwdriver, For 2.7, 3.5 and 4.0 mm screws (2.5 mm hex tip)
45-98189207
Plate Bending Lever (Single), Length : 140 mm, For plates 2.7 and 3.5 mm x2
45-98188442
Depth Gauge, Measures 0 to 35 mm (Length : 150 mm)
45-98188444
Depth Gauge, Measures 0 to 40 mm (Length : 190 mm)
10-CDTIS20
Combination Drill, Tap & Insert Sleeve for 2.0
10-CDTIS27
Combination Drill, Tap & Insert Sleeve for 2.7
10-CDTIS35
Combination Drill, Tap & Insert Sleeve for 3.5
60-310.870
Countersink Shaft 2.7 mm, length 62 mm
60-310.890
Countersink Shaft 3.5 mm, length 72 mm
45-166118
Periosteal Elevator (Length : 180 mm, Width : 6 mm)
45-182710
Retractor Hohmann (Length : 220 mm, Width : 10 mm)
60-310870, 60-310.890
3
Vet Inst
10-CDTIS20
45-166118
10-CDTIS27
45-182710
10-CDTIS35
Best Equipment Center Co., Ltd.
N2
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
SCREW / PIN / PLATE Cortical Screw Available 6 mm to 20 mm length. Use 1.1 mm pilot drill and 1.5 mm hex screwdriver. Use extreme care when tightening as the threads have a very fine pitch. Use in combination with 2.0 plates. The head is slightly smaller than the 2.0 cortical screw. 5 cortical screws per pack.
Vet Inst 45-98185206
1.5 mm Cortical Screw (Length : 6 mm)
45-98185207
1.5 mm Cortical Screw (Length : 7 mm)
45-98185208
1.5 mm Cortical Screw (Length : 8 mm)
45-98185209
1.5 mm Cortical Screw (Length : 9 mm)
45-98185210
1.5 mm Cortical Screw (Length : 10 mm)
45-98185211
1.5 mm Cortical Screw (Length : 11 mm)
45-98185212
1.5 mm Cortical Screw (Length : 12 mm)
45-98185214
1.5 mm Cortical Screw (Length : 14 mm)
45-98185216
1.5 mm Cortical Screw (Length : 16 mm)
45-98185218
1.5 mm Cortical Screw (Length : 18 mm)
45-98185220
1.5 mm Cortical Screw (Length : 20 mm)
10-CS1520
1.5 mm Cortical Screws (Length : 22 mm)
10-CS1522
1.5 mm Cortical Screws (Length : 24 mm)
10-CS1524
Available 6 mm to 24 mm length, the spherical head of these screws provides for compression when used in association with 2.0 mm compression plates. 5 cortical screws per pack.
45-98185308
45-98185314
45-98185320
45-98185310
45-98185316
45-98185322
45-98185312
45-98185318
10-CS1516
Vet Inst
45-98185306
2.0 mm Cortical Screw (Length : 6 mm)
45-98185308
2.0 mm Cortical Screw (Length : 8 mm)
45-98185310
2.0 mm Cortical Screw (Length : 10 mm)
45-98185312
2.0 mm Cortical Screw (Length : 12 mm)
45-98185314
2.0 mm Cortical Screw (Length : 14 mm)
10-CS2014
45-98185316
2.0 mm Cortical Screw (Length : 16 mm)
10-CS2016
45-98185318
2.0 mm Cortical Screw (Length : 18 mm)
10-CS2018
45-98185320
2.0 mm Cortical Screw (Length : 20 mm)
45-98185322
2.0 mm Cortical Screw (Length : 22 mm)
45-98185324
2.0 mm Cortical Screw (Length : 24 mm)
45-98185324
Best Equipment Center Co., Ltd.
45-98185306
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
4
SCREW / PIN / PLATE
Cortical Screw
5 cortical screws per pack.
Vet Inst 45-98185406
2.7 mm Cortical Screw (Length : 6 mm)
45-98185408
2.7 mm Cortical Screw (Length : 8 mm)
10-CS2708
45-98185410
2.7 mm Cortical Screw (Length : 10 mm)
10-CS2710
45-98185412
2.7 mm Cortical Screw
45-98185414
2.7 mm Cortical Screw (Length : 14 mm)
45-98185416
2.7 mm Cortical Screw (Length : 16 mm)
45-98185418
2.7 mm Cortical Screw (Length : 18 mm)
45-98185420
2.7 mm Cortical Screw (Length : 20 mm)
45-98185422
2.7 mm Cortical Screw (Length : 22 mm)
45-98185424
2.7 mm Cortical Screw (Length : 24 mm)
45-98185428
2.7 mm Cortical Screw (Length : 28 mm)
45-98185510
3.5 mm Cortical Screw (Length : 10 mm)
45-98185512
3.5 mm Cortical Screw (Length : 12 mm)
45-98185514
3.5 mm Cortical Screw (Length : 14 mm)
45-98185516
3.5 mm Cortical Screw (Length : 16 mm)
45-98185518
3.5 mm Cortical Screw (Length : 18 mm)
45-98185520
3.5 mm Cortical Screw (Length : 20 mm)
45-98185522
3.5 mm Cortical Screw (Length : 22 mm)
45-98185524
3.5 mm Cortical Screw (Length : 24 mm)
45-98185526
3.5 mm Cortical Screw (Length : 26 mm)
45-98185528
3.5 mm Cortical Screw (Length : 28 mm)
10-CS3528
45-98185530
3.5 mm Cortical Screw (Length : 30 mm)
10-CS3530
45-98185532
3.5 mm Cortical Screw (Length : 32 mm)
(Length : 12 mm)
3.5 mm Cortical Screw (Length : 34 mm)
5
45-98185536
3.5 mm Cortical Screw (Length : 36 mm)
45-98185540
3.5 mm Cortical Screw (Length : 40 mm)
45-98185545
3.5 mm Cortical Screw (Length : 45 mm)
Best Equipment Center Co., Ltd.
10-CS2720
10-CS3512 10-CS3516 10-CS3520 10-CS3524
10-CS3534
4.5 mm Cortical Screws (Length : 16 mm)
10-CS4516
4.5 mm Cortical Screws (Length : 18 mm)
10-CS4518
4.5 mm Cortical Screws (Length : 20 mm)
10-CS4520
4.5 mm Cortical Screws (Length : 22 mm)
10-CS4522
4.5 mm Cortical Screws (Length : 26 mm)
10-CS4526
4.5 mm Cortical Screws (Length : 28 mm)
10-CS4528
4.5 mm Cortical Screws (Length : 30 mm)
10-CS4530
4.5 mm Cortical Screws (Length : 32 mm)
10-CS4532
4.5 mm Cortical Screws (Length : 46 mm)
10-CS4546
4.5 mm Cortical Screws (Length : 48 mm)
10-CS4548
4.5 mm Cortical Screws (Length : 50 mm)
10-CS4550
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
SCREW / PIN / PLATE Cortical Screw, Self-tapping 5 cortical screws per pack.
Vet Inst 1.0 mm Cortical Self Tapping Screws 4 mm
10-CSST1004
1.0 mm Cortical Self Tapping Screws 5 mm
10-CSST1005
1.0 mm Cortical Self Tapping Screws 6 mm
10-CSST1006
1.0 mm Cortical Self Tapping Screws 7 mm
10-CSST1007
1.0 mm Cortical Self Tapping Screws 8 mm
10-CSST1008
1.0 mm Cortical Self Tapping Screws 9 mm
10-CSST1009
1.0 mm Cortical Self Tapping Screws 10 mm
10-CSST1010
Cortical Screw, Self-tapping 5 cortical screws per pack.
Vet Inst
N2
45-98185806
1.5 mm Cortical Screw, Self-tapping (Length : 6 mm)
21-COR-ST1506
45-98185807
1.5 mm Cortical Screw, Self-tapping (Length : 7 mm)
21-COR-ST1507
45-98185808
1.5 mm Cortical Screw, Self-tapping (Length : 8 mm)
21-COR-ST1508
45-98185809
1.5 mm Cortical Screw, Self-tapping (Length : 9 mm)
21-COR-ST1509
45-98185810
1.5 mm Cortical Screw, Self-tapping (Length : 10 mm)
21-COR-ST1510
45-98185811
1.5 mm Cortical Screw, Self-tapping (Length : 11 mm)
45-98185812
1.5 mm Cortical Screw, Self-tapping (Length : 12 mm)
21-COR-ST1512
45-98185814
1.5 mm Cortical Screw, Self-tapping (Length : 14 mm)
21-COR-ST1514
45-98185815
1.5 mm Cortical Screw, Self-tapping (Length : 16 mm)
21-COR-ST1516
45-98185818
1.5 mm Cortical Screw, Self-tapping (Length : 18 mm)
21-COR-ST1518
45-98185820
1.5 mm Cortical Screw, Self-tapping (Length : 20 mm)
10-CSST1520
21-COR-ST1520
1.5 mm Cortical Screw, Self-tapping (Length : 24 mm)
10-CSST1524
21-COR-ST1524
Cortical Screw, Self-tapping 5 cortical screws per pack.
N2 45-98185906
2.0 mm Cortical Screw, Self-tapping (Length : 6 mm)
21-COR-ST2006
45-98185908
2.0 mm Cortical Screw, Self-tapping (Length : 8 mm)
21-COR-ST2008
45-98185910
2.0 mm Cortical Screw, Self-tapping (Length : 10 mm)
21-COR-ST2010
45-98185912
2.0 mm Cortical Screw, Self-tapping (Length : 12 mm)
21-COR-ST2012
45-98185914
2.0 mm Cortical Screw, Self-tapping (Length : 14 mm)
21-COR-ST2014
45-98185916
2.0 mm Cortical Screw, Self-tapping (Length : 16 mm)
21-COR-ST2016
45-98185918
2.0 mm Cortical Screw, Self-tapping (Length : 18 mm)
21-COR-ST2018
45-98185920
2.0 mm Cortical Screw, Self-tapping (Length : 20 mm)
21-COR-ST2020
45-98185922
2.0 mm Cortical Screw, Self-tapping (Length : 22 mm)
21-COR-ST2022
45-98185924
2.0 mm Cortical Screw, Self-tapping (Length : 24 mm)
21-COR-ST2024
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
6
SCREW PIN PLATE 7
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
ORTHIPEDICS
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
8
SCREW / PIN / PLATE Vet Inst
N2
45-98186006
2.7 mm Cortical Screw, Self-tapping (Length : 6 mm)
21-COR-ST2706
45-98186008
2.7 mm Cortical Screw, Self-tapping (Length : 8 mm)
21-COR-ST2708
45-98186010
2.7 mm Cortical Screw, Self-tapping (Length : 10 mm)
21-COR-ST2710
45-98186012
2.7 mm Cortical Screw, Self-tapping (Length : 12 mm)
21-COR-ST2712
45-98186014
2.7 mm Cortical Screw, Self-tapping (Length: 14mm)
45-98186016
2.7 mm Cortical Screw, Self-tapping (Length : 16 mm)
21-COR-ST2716
45-98186018
2.7 mm Cortical Screw, Self-tapping (Length : 18 mm)
21-COR-ST2718
45-98186020
2.7 mm Cortical Screw, Self-tapping (Length : 20 mm)
21-COR-ST2720
45-98186022
2.7 mm Cortical Screw, Self-tapping (Length : 22 mm)
21-COR-ST2722
45-98186024
2.7 mm Cortical Screw, Self-tapping (Length : 24 mm)
21-COR-ST2724
2.7 mm Cortical Screw, Self-tapping (Length : 26 mm)
21-COR-ST2726
2.7 mm Cortical Screw, Self-tapping (Length : 28 mm)
21-COR-ST2728
45-98186028
10-CSST2714
21-COR-ST2714
N2
Vet Inst 45-98186110
3.5 mm Cortical Screw, Self-tapping (Length : 10 mm)
21-COR-ST3510
45-98186112
3.5 mm Cortical Screw, Self-tapping (Length : 12 mm)
21-COR-ST3512
45-98186114
3.5 mm Cortical Screw, Self-tapping (Length : 14 mm)
45-98186116
3.5 mm Cortical Screw, Self-tapping (Length : 16 mm)
21-COR-ST3516
45-98186118
3.5 mm Cortical Screw, Self-tapping (Length : 18 mm)
21-COR-ST3518
45-981861201
3.5 mm Cortical Screw, Self-tapping (Length : 20 mm)
21-COR-ST3520
45-98186122
3.5 mm Cortical Screw, Self-tapping (Length : 22 mm)
21-COR-ST3522
45-98186124
3.5 mm Cortical Screw, Self-tapping (Length : 24 mm)
21-COR-ST3524
45-98186126
3.5 mm Cortical Screw, Self-tapping (Length : 26 mm)
21-COR-ST3526
45-98186128
3.5 mm Cortical Screw, Self-tapping (Length : 28 mm)
21-COR-ST3528
3.5 mm Cortical Screw, Self-tapping (Length : 30 mm)
21-COR-ST3530
3.5 mm Cortical Screw, Self-tapping (Length : 32 mm)
21-COR-ST3532
3.5 mm Cortical Screw, Self-tapping (Length : 34 mm)
21-COR-ST3534
3.5 mm Cortical Screw, Self-tapping (Length : 36 mm)
21-COR-ST3536
Stainless steel
Fully threaded, spiral point Thread diameter : 2.2 mm Thread pitch : 1.0 mm Hexagon socket : 1.5 mm Head diameter : 4.0 mm Pilot hole : 1.5 mm Pack of 5 - Price displayed is per screw
9
10-CSST3514
21-COR-ST3514
N2
Cancellous Screw, Self-Tapping 45-186173
2.2 mm Cancellous Screw, Self-Tapping (Length : 10 mm)
21-CAN-FT2210
45-186174
2.2 mm Cancellous Screw, Self-Tapping (Length : 12 mm)
21-CAN-FT2212
45-186175
2.2 mm Cancellous Screw, Self-Tapping (Length : 14 mm)
21-CAN-FT2214
45-186176
2.2 mm Cancellous Screw, Self-Tapping (Length : 16 mm)
21-CAN-FT2216
45-186177
2.2 mm Cancellous Screw, Self-Tapping (Length : 18 mm)
21-CAN-FT2218
45-186178
2.2 mm Cancellous Screw, Self-Tapping (Length : 20 mm)
45-186179
2.2 mm Cancellous Screw, Self-Tapping (Length : 22 mm)
21-CAN-FT2220
45-186180
2.2 mm Cancellous Screw, Self-Tapping (Length : 24 mm)
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
21-CAN-FT2222 21-CAN-FT2224
Fax : 0-2595-0960
SCREW / PIN / PLATE
Stainless steel
Fully threaded, spiral point Thread diameter : 3.0 mm Thread pitch : 1.25 mm Hexagon socket : 2.5 mm Head diameter : 5.0 mm Pilot hole : 2.0 mm Pack of 5 - Price displayed is per screw
Cancellous Screw, Self-tapping
N2
45-186181
3.0 mm Cancellous Screw, Self-Tapping (Length : 12 mm)
21-CAN-FT3012
45-186182
3.0 mm Cancellous Screw, Self-Tapping (Length : 14 mm)
21-CAN-FT3014
45-186183
3.0 mm Cancellous Screw, Self-Tapping (Length : 16 mm)
21-CAN-FT3016
45-186184
3.0 mm Cancellous Screw, Self-Tapping (Length : 18 mm)
21-CAN-FT3018
45-186185
3.0 mm Cancellous Screw, Self-Tapping (Length : 20 mm)
21-CAN-FT3020
45-186186
3.0 mm Cancellous Screw, Self-Tapping (Length : 22 mm)
21-CAN-FT3022
45-186187
3.0 mm Cancellous Screw, Self-Tapping (Length : 24 mm)
21-CAN-FT3024
45-186188
3.0 mm Cancellous Screw, Self-Tapping (Length : 26 mm)
21-CAN-FT3026
45-186189
3.0 mm Cancellous Screw, Self-Tapping (Length : 28 mm)
21-CAN-FT3028
45-186190
3.0 mm Cancellous Screw, Self-Tapping (Length : 30 mm)
21-CAN-FT3030
45-186191
3.0 mm Cancellous Screw, Self-Tapping (Length : 32 mm)
21-CAN-FT3032
45-186192
3.0 mm Cancellous Screw, Self-Tapping (Length : 34 mm)
21-CAN-FT3034
45-186193
3.0 mm Cancellous Screw, Self-Tapping (Length : 36 mm)
21-CAN-FT3036
Vet Inst
Stainless steel
Fully threaded Thread diameter : 3.5 mm Thread pitch : 1.75 mm Hexagon socket : 2.5 mm Head diameter : 6.0 mm Pilot hole : 2.0 mm Pack of 5 - Price displayed is per screw
3.5 mm Cancellous Screw (Length : 12 mm)
10-CAN3512
3.5 mm Cancellous Screw (Length : 14 mm)
10-CAN3514
3.5 mm Cancellous Screw (Length : 16 mm)
10-CAN3516
3.5 mm Cancellous Screw (Length : 18 mm)
10-CAN3518
3.5 mm Cancellous Screw (Length : 24 mm)
10-CAN3520
3.5 mm Cancellous Screw (Length : 32 mm)
10-CAN3532
Mini Dynamic Compression Plate Designed with an inclined hole that converts screw compression into unidirectional plate movement. The screw hole accepts cortical screws in either load or neutral position. The hole also allows up to 25 degrees of screw angulation and 7 degrees of transverse screw angulation.
N2 1.5 Mini Dynamic Compression Plate - 4 Hole (Length : 19 mm, Width : 5 mm)
21-MCP-15-04
1.5 Mini Dynamic Compression Plate - 5 Hole (Length : 23 mm, Width : 5 mm)
21-MCP-15-05
1.5 Mini Dynamic Compression Plate - 6 Hole (Length : 27 mm, Width : 5 mm)
21-MCP-15-06
1.5 Mini Dynamic Compression Plate - 7 Hole (Length : 31 mm, Width : 5 mm)
21-MCP-15-07
1.5 Mini Dynamic Compression Plate - 8 Hole (Length : 35 mm, Width : 5 mm)
21-MCP-15-08
1.5 Mini Dynamic Compression Plate - 10 Hole (Length : 43 mm, Width : 4mm)
21-MCP-15-10
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
10
SCREW / PIN / PLATE
N2 2.0 mm Mini Dynamic Compression Plate - 3 Hole (Length : 17 mm, Width : 5 mm)
10-MP-20317
45-98187304 2.0 mm Mini Dynamic Compression Plate - 4 Hole (Length : 22 mm, Width : 5 mm)
21-MCP-20-04
2.0 mm Mini Dynamic Compression Plate - 5 Hole (Length : 27 mm, Width : 5 mm)
21-MCP-20-05
45-98187306 2.0 mm Mini Dynamic Compression Plate - 6 Hole (Length : 32 mm, Width : 5 mm)
21-MCP-20-06
2.0 mm Mini Dynamic Compression Plate - 7 Hole (Length : 37 mm, Width : 5 mm)
21-MCP-20-07
45-98187308 2.0 mm Mini Dynamic Compression Plate - 8 Hole (Length : 42 mm, Width : 5 mm)
21-MCP-20-08
2.0 mm Mini Dynamic Compression Plate - 9 Hole (Length : 47 mm, Width : 5 mm)
21-MCP-20-09
45-98187310 2.0 mm Mini Dynamic Compression Plate - 10 Hole (Length : 52 mm, Width : 5 mm)
21-MCP-20-10
Dynamic Compression Plate Vet Inst 10-C2704036
N2 21-MCP-27-04
45-98187804 2.7 mm Dynamic Compression Plate - 4 Hole
(Length : 37 mm, Width : 8 mm)
45-98187805 2.7 mm Dynamic Compression Plate - 5 Hole
(Length : 45 mm, Width : 8 mm)
45-98187806 2.7 mm Dynamic Compression Plate - 6 Hole
(Length : 53 mm, Width : 8 mm)
45-98187807 2.7 mm Dynamic Compression Plate - 7 Hole
(Length : 61 mm, Width : 8 mm)
21-MCP-27-07
45-98187808 2.7 mm Dynamic Compression Plate - 8 Hole
(Length : 68 mm, Width : 8 mm)
21-MCP-27-08
45-98187809 2.7 mm Dynamic Compression Plate - 9 Hole
(Length : 77 mm, Width : 8 mm)
21-MCP-27-05 10-C2705052
10-C2709076
21-MCP-27-06
21-MCP-27-09
45-98187810
2.7 mm Dynamic Compression Plate - 10 Hole (Length : 85 mm, Width : 8 mm)
21-MCP-27-10
45-98187812
2.7 mm Dynamic Compression Plate - 12 Hole (Length : 101 mm, Width : 8 mm)
21-MCP-27-12
2.7 mm Dynamic Compression Plate - 14 Hole (Length : 117mm, Width : 8 mm)
21-MCP-27-14
Vet Inst
N2 21-CPN-35-04
45-98188104
3.5 mm Dynamic Compression Plate - 4 Hole (Length : 50 mm, Width: 10 mm)
45-98188105
3.5 mm Dynamic Compression Plate - 5 Hole (Length : 62 mm, Width : 10 mm)
10-C3505062
21-CPN-35-05
45-98188106
3.5 mm Dynamic Compression Plate - 6 Hole (Length : 74 mm, Width : 10 mm)
10-C3506074
21-CPN-35-06
45-98188107
3.5 mm Dynamic Compression Plate - 7 Hole (Length : 86 mm, Width : 10 mm)
21-CPN-35-07
45-98188108
3.5 mm Dynamic Compression Plate - 8 Hole (Length : 98 mm, Width : 10 mm)
21-CPN-35-08
3.5 mm Dynamic Compression Plate - 9 Hole (Length : 110 mm, Width : 10 mm)
21-CPN-35-09
45-98188110
3.5 mm Dynamic Compression Plate - 10 Hole (Length : 122 mm, Width : 10 mm)
45-98188112
3.5 mm Dynamic Compression Plate - 12 Hole (Length : 146 mm, Width : 10 mm)
11
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
10-P3510130
21-CPN-35-10 21-CPN-35-12
Fax : 0-2595-0960
SCREW / PIN / PLATE
Acctobular Plate These anatomically contoured plates are designed to fit the dorsal acetabular surface, which helps facilitate accurate reduction of acetabular fractures. 45-98192304
1.5 mm Mini Acetabular Plate - 6 Hole (Length : 31 mm, Width : 5 mm)
45-98192308
2.7 / 3.5 mm Mini Acetabular Plate - 4 Hole (Length : 31 mm, Width : 8 mm)
45-98192309
2.7 / 3.5 mm Mini Acetabular Plate - 6 Hole (Length : 31 mm, Width : 8 mm)
These anatomically contoured plates are designed to fit the dorsal acetabular surface, which helps facilitate accurate reduction of acetabular fractures. In addition, the rounded plate end design reduces the potential of soft tissue irritation. Cortical screws can be placed at variable angles via holes to avoid interference with other screws and penetrating the hip joint.
N2 2.0 mm Acetabular Plate - 4 Holes, Thickness : 1.5 mm (Length : 19 mm)
21-ACE20-04-0
45-186038
2.0 mm Acetabular Plate - 4 Holes, Thickness : 1.5 mm (Length : 27 mm)
21-ACE20-04-1
45-186040
2.7 mm Acetabular Plate - 6 Holes, Thicknes : 1.5 mm (Length : 33 mm)
21-ACE27-06-2
2.7 mm Acetabular Plate - 6 Holes, Thickness : 2.0 mm (Length : 34 mm)
21-ACE27-06-3
3.5 mm Acetabular Plate - 6 Holes, Thicknes s: 2.0 mm (Length : 42 mm)
21-ACE35-06-4
3.5 mm Acetabular Plate - 6 Holes, Thickness : 2.5 mm (Length : 46 mm)
21-ACE35-06-5
Cuttable Plate Can be used with 1.5 or 2.0 mm cortical screws. Cuttable plates are relatively ‘thin’ plates, which can be customised to the desired length by plate cutters. The equidistant hole design allows different thickness plates to be “stacked” and permit screw insertion through the holes. Also, the hole design allows for a greater number of screws to be inserted in each fragment compared to dynamic compression plate holes.
N2
45-186028
1.5 mm Cuttable Plate - 30 Holes (Length : 120 mm)
21-CUT1530120
45-186030
2.0 mm Cuttable Plate - 30 Holes (Length : 150 mm)
21-CUT2030150
45-186034
2.7 mm Cuttable Plate - 25 Holes (Length : 150 mm)
21-CUT2725150
45-186036
2.0 mm Cuttable Plate - 50 Holes (Length : 300 mm)
45-98188320
2.0 mm Cuttable Plate - 50 Holes Thickness : 1.2 mm (Length : 300 mm, Width : 7 mm)
45-98188327
2.7 mm Cuttable Plate - 50 Holes Thickness : 1.5 mm (Length : 300 mm, Width : 7 mm)
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
21-CUT2750300
Fax : 0-2595-0960
12
SCREW / PIN / PLATE
Reconstruction Plate The side cut design allows for easy three dimensional contouring along complex bony surfaces. However, care must be taken to ensure contouring does not exceed 15 degrees in any one direction. Cortical screws can be angled during placement to avoid interference with other screws and engage as many fragments as possible. Commonly utilised for stabilisation of mandibular and pelvic fractures. *Note : These plates should not be utilised for load-bearing fixation. Plate width : 8.0 mm Plate thickness : 2.0 mm
N2 45-98192020
2.0 mm Reconstruction Plate - 20 Hole (Length : 100 mm, Width : 5 mm)
45-186003
2.7 mm Reconstruction Plate - 5 Hole
(Length : 40 mm, Width : 8 mm)
45-186004
2.7 mm Reconstruction Plate - 6 Hole
(Length : 48 mm, Width : 8 mm)
45-186005
2.7 mm Reconstruction Plate - 7 Hole
(Length : 56 mm, Width : 8 mm)
45-186006
2.7 mm Reconstruction Plate - 8 Hole
(Length : 64 mm, Width : 8 mm)
45-186007
2.7 mm Reconstruction Plate - 9 Hole
(Length : 72 mm, Width : 8 mm)
45-186008
2.7 mm Reconstruction Plate - 10 Hole (Length : 80 mm, Width : 8 mm)
45-186009
2.7 mm Reconstruction Plate - 11 Hole (Length : 88 mm, Width : 8 mm)
45-186010
2.7 mm Reconstruction Plate - 12 Hole (Length : 96 mm, Width : 8 mm)
45-98192018
2.7 mm Reconstruction Plate - 18 Hole (Length : 144 mm, Width : 8 mm)
45-98192124
2.7 mm Reconstruction Plate - 24 Hole (Length : 192 mm, Width : 7.5 mm)
21-RCP-27-10 21-RCP-27-12
The side cut design allows for easy three dimensional contouring along complex bony surfaces. However, care must be taken to ensure contouring does not exceed 15 degrees in any one direction. Cortical screws can be angled during placement to avoid interference with other screws and engage as many fragments as possible. Commonly utilised for stabilisation of mandibular and pelvic fractures. *Note : These plates should not be utilised for load-bearing fixation. Plate width : 8.0 mm Plate thickness : 2.5 mm
N2
13
45-186021
3.5 mm Reconstruction Plate - 6 Hole
(Length : 70 mm, Width : 8 mm)
45-186022
3.5 mm Reconstruction Plate - 7 Hole
(Length : 82 mm, Width : 8 mm)
45-186023
3.5 mm Reconstruction Plate - 8 Hole
(Length : 94 mm, Width : 8 mm)
45-186024
3.5 mm Reconstruction Plate - 9 Hole
(Length : 106 mm, Width : 8 mm)
45-186025
3.5 mm Reconstruction Plate - 10 Hole (Length : 118 mm, Width : 8 mm)
45-186026
3.5 mm Reconstruction Plate - 11 Hole
(Length : 130 mm, Width : 8 mm)
45-186027
3.5 mm Reconstruction Plate - 12 Hole
(Length : 142 mm, Width : 8 mm)
45-98192152
3.5 mm Reconstruction Plate - 22 Hole (Length : 262 mm, Width : 9.5 mm)
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
21-RCP-35-12
Fax : 0-2595-0960
SCREW / PIN / PLATE Orthopaedic Wire
Stainless Steel Caliper
Ideal for pin & Wire Diameter Measurement Wire Diameter & Pin : 0.8 - 3.0 mm 45-180844
Stainless steel Caliper
3,500.00
High quality implant stainless steel Length : 10 metres Recommended sizes of cerclage wire : 0.6 mm - animals (<3 kg) 0.8 mm - cats / small dogs (<10 kg) 1.0 mm - medium dogs (<25 kg) 1.2 mm - large dogs (>25) 45-181402
Orthopaedic Wire, 0.2 mm, Length : 10 m (No.27)
45-181404
Orthopaedic Wire, 0.4 mm, Length : 10 m (No.24)
45-181406
Orthopaedic Wire, 0.6 mm, Length : 10 m (No.23)
45-181408
Orthopaedic Wire, 0.8 mm, Length : 10 m (No.21)
45-181410
Orthopaedic Wire, 1.0 mm, Length : 10 m (No.20)
45-181412
Orthopaedic Wire, 1.2 mm, Length : 10 m (No.18)
45-181415
Orthopaedic Wire, 1.5 mm, Length : 10 m (No.17)
Steinman Intramedullary Pin Double ended trocar tip Non-threaded 10 per pack
Vet Inst 45-180808
Steinman Intramedullary Pin (Length : 310 mm, 0.8 mm)
45-180810
Steinman Intramedullary Pin (Length : 310 mm, 1.0 mm)
45-180812
Steinman Intramedullary Pin (Length : 310 mm, 1.2 mm)
45-180814
Steinman Intramedullary Pin (Length : 310 mm, 1.4 mm)
45-180816
Steinman Intramedullary Pin (Length : 310 mm, 1.6 mm)
45-180818
Steinman Intramedullary Pin (Length : 310 mm, 1.8 mm)
45-180820
Steinman Intramedullary Pin (Length : 310 mm, 2.0 mm)
45-180822
Steinman Intramedullary Pin (Length : 310 mm, 2.2 mm)
45-180825
Steinman Intramedullary Pin (Length : 310 mm, 2.5 mm)
45-180830
Steinman Intramedullary Pin (Length : 310 mm, 3.0 mm)
N2
10-090000 10-090001
Steinman Intramedullary Pin (Length : 300 mm, 3.2 mm)
21-PIN320300T
Steinman Intramedullary Pin (Length : 300 mm, 3.6 mm)
21-PIN360300T
Steinman Intramedullary Pin (Length : 300 mm, 4.0 mm)
21-PIN400300T
Steinman Intramedullary Pin (Length : 300 mm, 4.8 mm)
21-PIN480300T
Steinman Intramedullary Pin (Length : 300 mm, 5.6 mm)
21-PIN560300T
Steinman Intramedullary Pin (Length : 300 mm, 6.0 mm)
Best Equipment Center Co., Ltd.
10-090153
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
14
JOINT SURGERY & MISCELLANEOUS
CCL nylon sutures With this system you can unassisted and without much effort perform a solid and long lasting fixation of the cruciate repair. 36-ZC0501005 CCL nylon sutures 50 lb x 500 mm + very small 30 mm needle + 10 mm crimp 36-ZC0801204 CCL nylon sutures 80 lb x 800 mm + small 45 mm needle + 12 mm crimp 36-ZC1001203 CCL nylon sutures 100 lb x 800 mm + medium 62 mm needle + 12 mm crimp 36-ZC24 CRIMP FORCEPS 18 cm 36-ZC25 COMPOUND CRIMP HIGH FORCE 23 cm
Bone Wax COMPOSITION : INDICATIONS : PRESENTATION :
Refined white beeswax, paraffin and isopropyl palmitate. Used in the control of bleeding from bone surfaces by acting as a mechanical barrier. 2,5 g plates individually wrapped. 12 in one box, sterile
36-Z046 Bone Wax
SMI-Spon
Absorbable Haemostatic Gelatin Sponge. COMPOSITION: Highly purified first grade gelatine material. INDICATIONS: For use in various surgical procedures. Intended for haemostatic use by applying to a bleeding surface. Non pyrogenic and biocompatible. 36-ZHG101010 SMI-Spon, Dental Cube, 10x10x10 mm (32 pcs) 36-ZHG705010 SMI-Spon, Regular, 70x50x10 mm
15
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
(10 pcs)
Fax : 0-2595-0960
RETRACTOR / ELEVATOR Wound Retractor A blunt multi-pronged flat retractor with a relatively wide gape. Suitable for skin or large exposures. 01-140652
Wound Retractor, 14 cm, stainless steel
01-140652
Retractor Gelpi The gelpi is an extremely versatile self retaining retractor useful in almost any orthopaedic procedure. 01-140663
01-140663
Retractor Gelpi, 18 cm
Periosteal Elevator
Reduces trauma to the soft tissue and surrounding areas after elevating and retracting soft tissue from bone. Phenolic handles are autoclavable and help provide an ergonomic grip.
45-166118
45-166118
Periosteal Elevator (Length : 180 mm, Width : 6 mm)
45-182710
45-182713
The tip of the retractor is placed on the proximal caudal edge of the tibia and the femoral intercondylar notch is used as a fulcrum to cranially lever the tibia with respect to the femur. It can also be useful to help reconstruct fractured long bones by manipulating fracture segments into anatomical alignment for fixation.
45-182717
Retractor Hohmann The Hohmann retractor is available in a variety of sizes and its use significantly improves visualisation of the caudal aspect of the menisci.
45-182705 45-182708
45-182718
Bone Retractor (Length : 150 mm, Width : 6 mm) Bone Retractor (Length : 160 mm : Width 8 mm)
45-182710
Retractor Hohmann (Length : 220 mm, Width : 10 mm)
45-182713
Retractor Hohmann (Length : 270 mm, Width : 13 mm)
45-182717
Retractor Hohmann (Length : 240 mm, Width : 17 mm)
45-182718
Retractor Hohmann (Length : 240 mm, Width : 24 mm)
10-001041
10-001041
Hohman Retractor (18 mm Short Narrow Tip L : 240 mm)
10-001043
Hohman Retractor (24 mm Long Broad tip 280 mm)
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
10-001043
Fax : 0-2595-0960
16
SAW / CUTTER / RASP Mini Friedmann Rongeur
Designed with horizontal grooved handles to enhance grip. Double spring mechanism allows self-opening action.
45-177312
45-184114
45-184115
45-177312 45-184114 45-184115
Mini Friedmann Rongeur, Tip width : 2.0 mm (Length : 120 mm) 3.0 mm Luer-Friedmann Rongeur, Length 140 mm, curved 5.0 mm Luer-Rongeur, Length 140 mm, curved
Lewis Rasp - Fine serration Designed specifically to remove any bone spurs following excision arthroplasty. Failure to remove bone spurs is the most common cause of problems with this procedure. Teeth cut on the back stroke.
45-177318
45-177318
Lewis Rasp - Fine serration (Length : 180 mm)
Trochlear Rasp
Designed for deepening the trochlea groove, the trochlea rasp has a range of diameters to suit breeds from chihuahuas to bull terriers. For larger breeds perform a wedge or block trochleaplasty using a hard backed saw. An accurately contoured trochlea is essential for a successful trochleoplasty. Articular cartilage is removed to be replaced by fibrocartilage.
45-182117
45-001022
45-182117
Trochlear Rasp (Length : 170 mm)
10-001022
Trochlea Rasp Small 8 mm max 3 mm min diameter
Patella Luxation Saw Designed for performing a wedge trocheoplasty for helping to correct patella luxation. Textured shaft provides a very secure hold. Suitable for fine or coarse saw blades. Handle Length : 165 mm Includes: Allen key & Saw Blade - Fine
45-182310
45-182312
45-182310 45-182312 45-182311
45-182311
Patella Luxation Saw Patella Luxation Saw Blade - Coarse Patella Luxation Saw Blade - Fine
Gigli Wire
45-182332
Essentially a bone cutting wire. More useful in large dogs. Hard to persuade the saw to cut where you want it to can be threaded through holes to make inaccesible cuts. Suitable for femoral head excision arthroplasty.
45-182331
10-001515
45-182332
Gigli Wire, Length : 300 mm
45-182331
Gigli Wire Saw Handle x2
10-001515
Gigli Saw Handles (pair) 75 mm
Bone Cutting Forceps Liston 45-183617
Suitable for cutting low density bone. Horizontally grooved handles. Double spring mechanism. 45-183617
17
Best Equipment Center Co., Ltd.
Bone Cutting Forceps Liston (Length : 170 mm, Form : straight)
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
BONE FORCEPS Bone Holding Forceps Helps maintain bone fragments in apposition during fracture repair. Long ratchet mechanism allows application on different bone diameters.
45-183014
45-183014
Bone Holding Forceps (Length : 135 mm)
Bone Holding Forceps Angus Designed with a round serrated jaw and an extra long ratchet mechanism 7.0 mm aperture.
45-183015
45-183015
Bone Holding Forceps Angus (Length : 150 mm)
Bone Reduction Forceps Setter Designed with serrated jaws for secure hold on bone fragments. Spinlock mechanism provides excellent ‘feel’.
45-183017
45-183017
Bone Reduction Forceps Setter (Length : 160 mm)
45-183020
Bone Reduction Forceps Setter (Length : 240 mm)
45-183020
Bone Holding Forceps Kern Kern forceps provide a very firm grip and control, which helps manipulate and reduce fragments. Bar ratchet mechanism allows one-handed tightening and release.
45-183117
45-183121
45-183117
Bone Holding Forceps Kern (Length : 170 mm)
45-183121
Bone Holding Forceps Kern (Length : 210 mm)
Bone Holding Forceps Self-centering 45-183415
Suitable for lateralising caudal pelvic segments during fracture repair. Ideal for maintaining position of pre-contoured bone plates on ischial bone segments. Speed lock mechanism provides greater tactile sensation. Verbrugge type. 45-183415 Bone Holding Forceps Self-centering (Length : 150 mm, Form : curved) 45-183419 Bone Holding Forceps Self-centering (Length : 190 mm, Form : curved) Pre-order
45-183419
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
18
BONE FORCEPS
Bone Holding Forceps - Serrated 45-183514
Opposing surfaces are designed with serrations to enhance grip of long bones. Tips are tapered, so they may be used as fragment forceps.
45-183514
Bone Holding Forceps - Serrated (Length : 140 mm)
45-183517
Bone Holding Forceps - Serrated (Length : 175 mm) Pre-order
45-183517
Bone Reduction Forceps Pointed Helps maintain bone fragments in place prior to permanent fixation. Long ratchet mechanism allows application on different bone diameters. Ideal for oblique long bone fractures.
45-182813
45-98182813
45-98182820
45-182817
45-98182813
Bone Reduction Forceps Pointed (Length : 135 mm)
45-182813
Pointed Bone Reduction Forceps, Length 135 mm
45-182817
Bone Reduction Forceps Reill (Length : 170 mm)
45-182820
Repostion Forcepts 20 cm
45-98182820
Bone Reduction Forceps Pointed, Robust (Length : 200 mm)
10-001202
19
Best Equipment Center Co., Ltd.
10-001203
10-001202
Very large fragment forceps 205 mm
10-001203
Very Large Fragment Forceps with Spinlock 215 mm
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
WIRE & PIN INSTRUMENT Compound Action Implant Cutter (TC) Suitable for cutting wires and small pins. Second fulcrum translates additional force to the jaw resulting in less hand strength required to cut implants. These instruments possess tungsten carbide (TC) inserts, which help them last 5 times as long as normal steel. 45-180921 45-180922
Compound Action Wire Cutter (TC), Length 215 mm Compound Action Implant Cutter (TC), Length : 220 mm Close cut design, Cuts hard wire up to 2.0 mm
45-180921
45-180922
45-180924
45-180924
Compound Action Implant Cutter (TC), Length : 240 mm Pre-order Cuts implants up to 3.5 mm
45-181011
10-126844 45-180090
45-18009001
10-001606
45-180863
10-001607
10-001221.1
Used to bend K and A wires prior to rotation and seating onto the bone. This instrument is designed to slip over the wire concentrating all the bending forces at the pin/bone interface. The instrument is double ended, the small end is for 0.9mm and 1.1mm wires, the large end is for 1.4mm, 1.6mm & 2.0mm wires. 45-181011
K-wire Bender (Length : 120 mm)
10-126844
Veriable Speed Orthopaedic Drill 1/4” 10.8V
10-001606 10-001607
Spare key for 1/4” chuck Drill Extension
SET180090 45-180090
ชุดสว่านไฟฟ้า (10-126844, 45-180090, 45-1800901) Extended Drill Chuck, Fits Standard Drills
45-18009001
Extended Drill Chuck T Handle Adapter
45-180863
Hand Chuck
10-001221.1
Adapter Jacob Chuck
Wire Extraction Forceps
Ideal to help remove Kirschner wires. Horizontally grooved handles to help improve grip. 45-181213
45-181213
Wire Extraction Forceps (Length : 130 mm)
Pin Punch 10-001360.2
10-001360.2 10-001360.3
Pin Punch 4 mm Pin Punch 6 mm
10-001360.3
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
20
WIRE & PIN INSTRUMENT Wire Forceps Orthopaedic (TC) With carbide inserts. For bending KIRSCHNER drill wires as well as wire cerclages. 45-181315
45-181315
Wire Forceps Orthopaedic (TC), (Length : 150 mm)
Wire Bender - Cutters
Combination instrument designed to bend as well as cut small diameter wire. Cuts up to 1.0 mm hard wire.
45-181316
45-181316
Wire Bender - Cutters (Length : 160 mm)
Wire Passer 45-181521
Ideal for placing wire close to the bone without damaging surrounding soft tissue Suitable for extracapsular cruciate repair using wire Single-ended. Up to 1.0 cm orthopaedic wire. 45-181521
Wire Passer (Length : 210 mm)
Wire Tightener Loute 45-181622
Helps maintain tension during cerclage wire application. Especially useful in deep tissues. 45-181622
Wire Tightener Loute (Length : 220 mm)
Pre-order
Implant cutter stainless to 4 mm capacity 10-001231/A
Second fulcrum translates additional force to the jaw resulting in less hand strength required to cut wires and pins. Compound Action 10-001231/A
Implant cutter stainless to 4 mm capacity Cut wire and pin up to 4 mm Detachable handle Length without handles 370 mm
10-001231VL
10-001229
21
10-001231VL
Implant Cutter Stainless to 1/46 mm capacity.63 cm Cut wire and pin up to 6 mm non - detachable handle
10-001229
Best Equipment Center Co., Ltd.
Safety Pin Cutter 4 mm, Safety Cutter to 4 mm
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
CHISEL / OSTEOTOME / MALLET
CHISEL / OSTEOTOME / MALLET
45-180482
Orthopedic Mallet Designed to be used with osteotomes, chisels, or gouges to dissect hard tissue. 45-180484
45-180482
Orthopaedic Mallet Hajek (Length : 220 mm, Head Weight : 140 g)
45-180484
Orthopaedic Mallet Bergmann (Length : 240 mm, Head Weight : 300 g)
45-180485
Orthopaedic Mallet (Head Weight : 500 g)
Pre-order
Pre-order
45-180485
Osteotome
Osteotomes are similar to chisels but are beveled on both sides. 45-182510
45-182510
45-182520
45-182521
45-182522
Osteotome (Length : 140 mm, Width : 10 mm)
Chisel Stille Suitable for excising dense bone. Cutting edge is beveled on one side. Use a chisel where heavier bone removal is required. 45-182520
Chisel Stille (Length : 200 mm, Width : 6 mm)
45-182521
Chisel Stille (Length : 200 mm, Width : 8 mm)
45-182522
Chisel Stille (Length : 200 mm, Width : 10 mm)
45-182523
Chisel Stille (Length : 200 mm, Width : 12 mm)
45-182523
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
22
TRAUMA IMPLANTS & INSTRUMENTS
Plate Bending Levers Spies type
Designed to help contour orthopaedic plates for precise fracture reduction.
45-185163
45-185163
Plate Bending Levers Spies (Pair), Length : 220 mm For plates 2.4, 2.7, 3.5 and 4.0 mm
Pre-order
Plate Bending Levers Designed to help contour orthopaedic plates for precise fracture reduction. 45-189220
45-98189206, 45-98189207
45-187215
45-189220
Plate Bending Lever (Single), Length : 200 mm, For plates 3.5 mm
Pre-order
45-98189206
Plate Bending Lever (Single), Length : 140 mm, For plates 3.5 and 2.7 mm
45-98189207
Plate Bending Lever (Single), Length : 140 mm, For plates 2.7 and 3.5 mm
Hex Screwdriver 45-187215
Hex Screwdriver, For 1.5 to 2.4 mm screws (1.5 mm hex tip) For 1.5 to 2.4 mm screws. 1.5 mm hex tip
45-98187225
45-98187225 10-SDHS35F
Hex Screwdriver, For 2.7, 3.5 and 4.0 mm screws (2.5 mm hex tip) 2.5 mm Hex Screwdriver+Sleeve with Fibre handle For 2.7, 3.5 and 4.0 mm screws. 2.5 mm hex tip
10-SDHS35F
Depth Gauge 45-98188442
Correctly measures hole depth to help determine necessary screw lengths. Add 1-2 mm to length for self tapping screws. 45-98188442
45-98188444
Depth Gauge, Measures 0 to 35 mm (Length : 150 mm) Suitable for 1.5 to 2.4 mm screws
45-98188444
Depth Gauge, Measures 0 to 40 mm (Length : 190 mm) Suitable for 2.7 to 3.5 mm screws
45-188447
23
45-188447
Best Equipment Center Co., Ltd.
Depth Gauge, Measures 10 to 60 mm (Length : 220 mm)
Tel : 0-2903-1916, 0-2903-3354
Pre-order
Fax : 0-2595-0960
TRAUMA IMPLANTS & INSTRUMENTS
Double Drill Guide, Triple Drill Guide 45-98188811
45-98188820, 45-98188825
10-CDTIS10
10-CDTIS20
10-CDTIS27
Standard drill guide, equivalent to the clearance drill size, so can be used to guide a tap. 45-98188811
Double Drill Guide (1.1 / 1.5 mm Drill Bit)
45-98188820
Triple Drill Guide
(2.0 mm Drill bit)
45-98188825
Triple Drill Guide
(2.5 mm Drill bit)
10-CDTIS10
1.0 mm Drill Guide
10-CDTIS20
Combination Drill, Tap & Insert Sleeve for 2.0
Pre-order
10-CDTIS27
Combination Drill, Tap & Insert Sleeve for 2.7
10-CDTIS35
Combination Drill, Tap & Insert Sleeve for 3.5
10-CEG2735
Small Drill Guide i/d 3.5 mm C” Guide 135 mm
10-SLG1115
Double Drill Guide/Sleeve for1.1&1.5 mm drills 100 mm
10-CDTIS35
10-CEG2735
10-SLG1115
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
24
TRAUMA IMPLANTS & INSTRUMENTS
45-98188918
45-98188920
Load/Neutral Drill Guide To exert compression at the fracture site, the cortical screw must be positioned precisely within the slot in the compression plate. The load/neutral drill guide has two tips, one for compression (load) and one where no compression is exerted (neutral).
45-98188925
45-188933
45-98188918
Load/Neutral Drill Guide 2.4 mm (1.8 mm Drill bit)
45-98188920
Load/Neutral Drill Guide 2.7 mm (2.0 mm Drill bit)
45-98188925
Load/Neutral Drill Guide 3.5 mm (2.5 mm Drill bit)
45-188933
Load/Neutral Drill Guide 3.5 mm
10-LNDG35
LOAD NEUTRAL DRILL GUIDES FOR 3.5 mm Compression
Pre-order
Pre-order
10-LNDG35
45-98189320
Drill Insert Sleeve Ideal to help insert screw for lag compression.
45-98189327
45-98189320
Drill Insert Sleeve (2.0 mm Drill bit)
45-98189327
Drill Insert Sleeve (2.7 mm Drill bit)
45-189432
Drill Insert Sleeve (3.2 mm Drill bit)
Pre-order
45-189432
Protection Sleeve 45-189435
Helps preserve soft tissue from iatrogenic trauma during drilling. Notched tip prevents slipping off bone.
45-98189435
45-189435
Protection Sleeve, 3.2 mm Drill Bit
45-98189435
3.5 mm Soft Tissue Protection Sleeve
Counter Sinks 45-98186725
Reduces risk of bone fracturing during lag screw application. Reduces prominence of screw head when lag screws are applied. Quick Coupling. 45-98186725
25
Best Equipment Center Co., Ltd.
Counter Sinks For 2.7, 3.5, and 4.0 mm screws
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
Pre-order
TRAUMA IMPLANTS & INSTRUMENTS Cortical Tap
Cuts threads into a bone that corresponds to the profile of screw threads. Quick Coupling.
Best Equipment Center Co., Ltd.
45-98186319
Cortical Tap, for 3.5 mm screws
Pre-order
45-98186318
Cortical Tap, for 2.7 mm screws
Pre-order
45-98186317
Cortical Tap, for 2.0 mm screws
45-98186316
Cortical Tap, for 1.5 mm screws
45-98186320
2.0 mm Cortical tap-Round / Square Shaft
10-TS12535
QUICK RELEASE TAPS 3.5 mm (1.25 pitch) Cortical Tap
10-TS00027
QUICK RELEASE TAPS 2.7 mm Cortical Tap
10-TD0015
1.5 mm Cortical Tap (Dental Fit)
10-TD0020
2.0 mm Cortical Tap (Dental Fit)
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
26
TRAUMA IMPLANTS & INSTRUMENTS
27
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
TRAUMA IMPLANTS & INSTRUMENTS
Drill Bit - Round shank Round shank ends are compatible with Jacobs Chuck. Dull drill bits can lead to cell necrosis and decreased accuracy, so ensure regular replacement of used drill bits.
Drill Bit - Round shank, Working length : 30 mm, 1.1 mm (Length : 70 mm)
Vet Inst
N2
10-090108.1
21-DRL-11-060
10-090101.1
21-DRL-15-060
For core drilling with 1.5 mm screws
Drill Bit - Round shank, Working length : 40 mm, 1.5 mm (Length : 100 mm) For core drilling with 2.0 mm screws
Drill Bit - Round shank, Working length : 35 mm, 2.0 mm (Length : 85 mm)
21-DRL-20-110
For core drilling with 2.7 mm screws
Drill Bit - Round shank, Working length : 45 mm, 2.5 mm (Length : 95 mm)
10-090103.1
10-090112
10-090104.1
21-DRL-27-150
For core drilling with 3.5 mm screws
Drill Bit - Round shank, Working length : 30 mm, 2.7 mm (Length : 75 mm) For through hole with 2.7 mm screws, For core drilling with 3.5 mm screws
23-260.325
Drill Bit - Round shank, Working length : 50 mm, 3.2 mm (Length : 200 mm) For core drilling with 4.5 mm screws
21-DRL-35-170
Drill Bit - Round shank, Working length : 52 mm, 3.5 mm (Length : 110 mm) For through hole with 3.5 mm screws, For core drilling with 4.5 mm screws
Comfort Screwdriver
Ergonomic silicone handle enhances grip and control. Quick Coupling. Autoclavable. 10-QRCS01
10-QRCS01
Handle for 2.4, 2.7, 3.5, 4.0, 4.5 Taps.Synthes fit 75
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
28
29
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
30
SAIR
60-314.020, 60-314.300
60-314.030, 60-311.430
Screwdriver 60-314.020
Screwdriver, hexagonal, small, with Holding Sleeve For 2.7 , 3.5 and 4.0 mm screws. 2.5 mm hex tip
60-314.030
Screwdriver Shaft, hexagonal, small, length 100 mm For 2.7, 3.5 and 4.0 mm screws. 2.5 mm hex tip
60-311.430
Handle with quick coupling, length 110 mm Suitable for 60-314.030 and 60-314.320
60-314.320
Screwdriver Shaft, hexagonal, with Holding Sleeve
60-314.300
Screwdriver, hexagonal, with Holding Sleeve, l.165 For 1.5 to 2.4 mm screws. 1.5 mm hex tip
Countersink Shaft
60-310.870, 60-310.890
60-310.870
Countersink Shaft 2.7, length 62 mm
60-310.890
Countersink Shaft 3.5 mm, length 72 mm
60-391.100
60-391.100
Wire Passer 45 mm bending diameter
Reduction Forceps with points 60-398.410
31
60-398.410
Reduction Forceps with points, wide, length 132 mm
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
SAIR
60-399.180
60-399.180
Retractor, small, 6mm wide, length 160 mm, short na
60-398.800
Bone Holding Forceps, self-centering, Length 190 mm
60-398.790
Bone Forceps, self-centering length 145 mm, speed lo
60-323.260
Universal Drill Sleeve 2.7, Drill bits 2.0 and 2.7
60-399.480
Periosteal Elevator, length 200 mm, slightly curved
60-398.800
60-398.790
60-323.260
60-399.480
20-604.16ST
20-604.28ST
20-604.16ST
Cortex Screws Self Tapping Dia 3.5 mm, Length 16 mm
20-604.28ST
Cortex Screws Self Tapping Dia 3.5 mm, Length 28 mm
20-604.30ST
Cortex Screws Self Tapping Dia 3.5 mm, Length 30 mm
20-604.30ST
20-654.08310 Kirschner Wire Both Side Trocar 0.8 x 310 mm 20-654.45310
Best Equipment Center Co., Ltd.
20-654.45310 Kirschner Wire Both Side Trocar 4.5 x 310 mm
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
32
SAIR Cortex Screw 60-204.010
Cortex Screw 3.5 mm, length 10 mm
60-204.012
Cortex Screw 3.5 mm, length 12 mm
60-204.014
Cortex Screw 3.5 mm, length 14 mm
60-204.016
Cortex Screw 3.5 mm, length 16 mm
60-204.018
Cortex Screw 3.5 mm, length 18 mm
60-204.020
Cortex Screw 3.5 mm, length 20 mm
60-204.024
Cortex Screw 3.5 mm, length 24 mm
60-204.026
Cortex Screw 3.5 mm, length 26 mm
60-248.040
DCP 3.5 mm, 4 holes, length 49 mm
60-248.050
DCP 3.5 mm, 5 holes, length 61 mm
60-248.060
DCP 3.5 mm, 6 holes, length 73 mm
60-248.070
DCP 3.5 mm, 7 holes, length 85 mm
Kirschner Wire with trocar tip 60-292.110
Kirschner Wire with trocar tip, St. steel, Dia 1 mm
60-292.130
Kirschner Wire with trocar tip, St. steel, Dia 1.22 mm
60-292.180
Kirschner Wire with trocar tip, St. steel, Dia 1.60 mm
60-292.190
Kirschner Wire with trocar tip, St. steel, Dia 1.8 mm
60-292.210
Kirschner Wire with trocar tip, St. steel, Dia 2 mm
Bending Template
33
Best Equipment Center Co., Ltd.
60-329.550
Bending Template, length 60 mm for plates 2.7
60-329.570
Bending Template, length 85 mm for plates 2.7
60-329.820
Bending Template for DCP 3.5 and LC-DCP 3.5, L.150
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
VET INSTRUMENT
Plate
10-090195
10-090066
Arthrodesis Wire Trochar Pointed at both ends. 1.4
10-CET0022
4.0 mm shank 4.8 mm threads 150 mm long pin-end thread
10-CMT0018
1.6 mm shank 2.0 mm threads 85 mm long pin-mid thread
10-CMT0024
3.2 mm shank 4.0 mm threads 130 mm long pin-mid thread
10-CMT0025
4.0 mm shank 4.8 mm threads 150 mm long pin-mid thread
45-180540
Negative Prifile Pin-End Thread ( L : 250 mm, 4.0 mm)
45-180550
Negative Prifile Pin-End Thread ( L : 300 mm, 5.0 mm)
45-180493
Positive Profile Pin-End Thread ( L : 110 mm, 2.8 mm)
45-180503
Positive Profile Pin-End Thread ( L : 75 mm, 1.6 mm)
45-180992
Positive Profile Pin-End Thread ( L : 97 mm, 2.0 mm)
Rasenberg 3.5 mm TPO Plate 25. Right
10-090196 Rasenberg 3.5 mm TPO Plate 25. Left
10-09930730L
3.5 TPO/DPO Locking Plate 30 Left
10-152914
2.7/3.5 mm Pantarsal plate Right.
10-H3510130
Heavy duty 3.5 mm 10 holes L : 130 mm
10-IN1106140020227
6.0 MM 4 HOLE NAILS. MODEL 11 2.7 mm SCREWS L : 140 mm
10-OW1010
Orthopaedic wire 1.0 mm
10-PW45
Plain washer 4.5 mm screws
21-WAS-15-20
Washer for 1.5 and 2.0 screws
21-WAS-24-27
Washer for 2.4 and 2.7 screws
21-WAS-35-40
Washer for 3.5 and 4.0 screws
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
34
VET INSTRUMENT
10-001114
10-001204
10-001205
35
10-001114
Fat Pad Retractor 180 mm
10-001204
Twin Point Reduction Forceps with Spinlock 215 mm
10-001205
Twin Point Fragment Forceps Straight 170 mm
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
VET INSTRUMENT
10-001262
Wire Loop Tightener 125 mm
10-001264
Wire Tightener with Two Cranks 285 mm
10-001262
10-001264
10-001500
10-001500
10-001526
10-001525
10-001525
Large Single KE Plus Clamp
10-001526
Medium Single KE Plus Clamp
10-001527
Small Single KE Plus Clamp
Best Equipment Center Co., Ltd.
VI Pattern Orthopaedic Distractor 330 mm
Tel : 0-2903-1916, 0-2903-3354
10-001527
Fax : 0-2595-0960
36
VET INSTRUMENT
37
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
VET INSTRUMENT
10-001560
Small Connecting Bar 1/8 (3.2mm) x 150 mm
10-001585
Large Connecting Bar 5/16 (8mm) x 240 mm
10-001589XL
Medium Connecting Bar 3/16 (4.8mm) x 250 mm
10-012181
Rodent Tooth Rasp Small 180 mm
10-012181
10-012184
10-012184
Rodent Spatula
10-012188
Rodent Cheek Dilator Small Max gape 40 mm
10-012189A
Rodent Cheek Dilator Long Reach-use with long burs
10-025534
T Piece Scavenging Connector
10-012188
10-025534
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
38
VET INSTRUMENT
10-106230
Rochester Pean 16 cm 6.5 Str Art Forceps
10-106230
10-584660
McPhails 18 cm 7 N/Holders
10-584670
McPhails 20 cm 8 N/Holders
10-584660
10-584670
10-702150
Weislander S/R Retractor 14 cm 5.5 Sharp 60 mm gape
10-743120
Dressing Scissors Blunt/Sharp 6” Cof
10-702150
10-743120
39
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
VET INSTRUMENT
10-H090104
10-10MDB07
0.7 mm Drill Bit
10-190107
Drill Bits soft, DIA : 4.0 mm, L : 127 mm
10-190108
Drill Bits soft, DIA : 4.5 mm, L : 127 mm
10-H260001
Straight Nose Cone 1:1
10-LSDG2724
Locking Screw Drill Guide for small 2.7
10-SDIN1.0
Screwdriver Insert for 1.0 mm Screws
10-H260001
10-LSDG2724
10-SDIN1.0
10-SDMMH
Modular Metal Screwdriver
10-SDMMH
Best Equipment Center Co., Ltd.
Tel : 0-2903-1916, 0-2903-3354
Fax : 0-2595-0960
40
เราจะเป็นองค์กรที่ดีกว่า ในธุรกิจสัตวแพทย์