RHEINGOLD BMW ISTA & BMW ENGINEER TOOL USER MANUAL Matched Product
Latest Version BMW ISTA Software For BMW ICOM Buy it Now: $85.00 Latest V8.2015 BMW ISTA Rheingold ISTA-D (3.50) + ISTA-P (56.10) + Engineer Tool in 500GB hard disk Win7. This BMW ISTA Rheingold software...
Description This is the user's manual of Rheingold BMW ISTA & BMW Engineer Tool which installed in 500GB hard drive for BMW ICOM A and A2. The content includes below information: 1. What included in this 500GB hard drive and what computer can be used with it. 2. Description of basic function of ISTA-D and ISTA-P 3. How to connect ICOM to BMW Engineer tools before using it. 4. How to update firmware of BMW ICOM to this latest software. Please note: 1. DO NOT install VGA driver into hard drive (laptop) otherwise you will get bluescreen problem. 2. It is only for BMW diagnose and programming, do NOT use it for internet. 3. DO NOT use any External storage device on it for avoiding virus. Rheingold BMW ISTA & BMW Engineer Tool User Manual: 1. Software for PC: Most computer with sata hard disk interface, win7 32-bit systems, configuration requirements, dual-core CPU, 3G or more RAM. 2. The software includes: 1)BMW Group ISPI Admin Client（V1.1.808）Software management program, display the software version installed in ISPI, the offline version.
2)BMW Group ISTA （ Latest version ） BMW diagnosis system, Circuit diagram, Repair Information. 3)BMW Group ISTA-P（Latest version）BMW programming system,Expert Mode. 4)ETK（Lokal)（Latest version）BMW Electronic Parts Catalogue. 1)KSD（V2015.05） 2)Engineer tools (Engineer tools) ● EasyComnnect
ICOM connection tools
● E-sys (V3.26.1)
BMW F series Diagnosis Coding Programming
● INPA
BMW E, F series Diagnosis
● ItoolRadar
ICOM connection tools
● NCS-Expert tool ● WinKFP
BMW E series Coding tools
BMW E series Programming tools
● Win 7 language select change windows 7 language 3.How to use： ● Diagnosis：BMW Group ISTA，After open the software，Doubleclick the upper left corner to change Full Screen.
How to change ISTA Language：click the setting ICON, it will show
When it show ICOM ,you can click Lower right corner connect to start diagnosis （If the Status show firmware,you must update your ICOM firmware first） ● Programming，ISTA-P。 After open it ， click Reset setting then close ， open it again ， you can enter the setting language and Resolution
select your language
check your desktop,resolution and make sure it is the same as here you choose After setting you can choose BMW, mini, BMW motorcycles, Rolls-Royce
â—? ETKďźŒ
Setting language and other
● KSD
Click setting ,change your language and other setting ● Engineer software （ Note:This software is for engineers with expertise,If you are not familiar with the software, we do not recommend using this software to do the test）INPA， Winkfp，NCS-Expert. Before using the software must be setting connection to ICOM ①open engineer tools, ItoolRadar，click first line,Click Reserve
Then ICOM status will change to Reserve
②Open EasyConnect, Set as follows，The IP address must be Correct
Click CHECK，as follows
③Open INPA,Winkfp,NCS,It will be OK，
● ICOM Firmware Update (Update file in:D:ICOM_firmware-01_38_00) 1 、 Please connect ICOM with Lan cable to the computer, charge ICOM via 12 power adapter 2、use IE explorer to open http://169.254.92.38:60080/, user ID/password: root/NZY11502 3、click"update firmware". You will get the ICOM hardware version 4 、 choose "ICOM-BootImage-01-24-00.bin", set the "image type" into "SYSTEM", then click "send the file" 5、when it shows "write the image file to the flash?", click "yes",then light in ICOM will turn red 6、then it shows "The SYSTEM IMAGE update was successfull", click "update firmware" 7 、 choose ICOM-ApplicationImage-01-38-02.bin, change image type to APPLICATION, click "send the file", it will take some mins to finish 8、when it shows: "Write the image file to the flash?", click "yes", then ICOM light will turn to red again 9、when all runs ok, click "reboot" 10、 ● Change win 7 Language Open win7 language select, select the language you want and click change language
Thanks for reading, we do this article hope will helpful for you. Any question please feel free to contact with us. OBDMORE.COM
More related topic Resolve the problem can not open ISTA-P FAQ OF INSTALL AND USING VOLVO VIDA DICE SOFTWARE Resolve Lexia 3 VCI no connection problem