Diamond discs
05
Dry cutting Dry cutting discs are intended, both because of their diameters and their composition, to be used on portable machines where cooling is caused by air. Discs are chosen in function of the desired finish, the material to be cut, and the user’s preferences.
C
• Optimal performance: • Excellent performance: • Good performance:
D
C Segment height D Tooth thickness
General building: General construction materials are considered to be those that are commonly used and do not have extreme values of hardness or abrasion. Among these materials are roof tiles, concrete roof tiles, terrazzo, bricks, concrete blocks, hydraulic tiles, etc.
B A
General building. Segmenting. Professional 7 REF.
€
50702-115 50702-125 50702-180 50702-230
MBox A mm
051452 051476 051490 051513
1 1 1 1
4 4 4 4
115 125 180 230
General building. Turbo. Professional 7
B mm C mm D mm Nº
REF.
22,2 22,2 22,2 22,2
50703-115 50703-125 50703-180 50703-230
7 7 7 7
2,1 2,2 2,4 2,6
8 9 13 15
Speed Lifespan
50711-115 50711-125 50711-180 50711-230
Speed Lifespan
162
051537 051551 051575 051599
1 1 1 1
MBox
A mm
B mm
C mm
D mm
4 4 4 4
115 125 180 230
22,2 22,2 22,2 22,2
7 7 7 7
2,1 2,1 2,6 2,8
MBox
A mm
B mm
C mm
D mm
4 4 4 4
115 125 180 230
22,2 22,2 22,2 22,2
7 7 7 7
2 2 2,3 2,5
Speed Lifespan
General building. Segmenting. Pro 7 REF.
€
€
General building. Turbo. Pro7
MBox A mm
405453 405484 405514 405545
1 1 1 1
4 4 4 4
115 125 180 230
B mm C mm D mm Nº
REF.
22,2 22,2 22,2 22,2
50712-115 50712-125 50712-180 50712-230
7 7 7 7
2,2 8 2,2 10 2,4 14 2,4 16
Speed Lifespan
€
405576 405613 405644 405675
1 1 1 1
Hard materials: Hard materials are considered to be those with extreme values of hardness and average abrasion. Among these materials are granite, klinker, quartzite, porphyry, refractory brick, cured concrete, etc.
B A
Hard materials. Segmenting. Professional 7 REF.
€
50704-115 50704-125 50704-180 50704-230
MBox A mm
051612 051636 051650 051674
115 125 180 230
4 4 4 4
1 1 1 1
Hard materials. Turbo. Professional 7
B mm C mm D mm Nº
REF.
22,2 22,2 22,2 22,2
50705-115 50705-125 50705-180 50705-230
7 7 7 7
2,1 9 2,2 10 2,4 12 2,4 16
Speed Lifespan
€
051698 051711 051735 051759
1 1 1 1
MBox
A mm
B mm
C mm
D mm
4 4 4 4
115 125 180 230
22,2 22,2 22,2 22,2
7 7 7 7
2,1 2,1 2,6 2,8
Speed Lifespan
Abrasive materials: Abrasive materials are considered to be those that are not very hard, but which wear out discs quickly because of their highly abrasive capacity. Among these materials are green concrete, aerated concrete blocks, old concrete, silica terrazzo, asphalt, normal brick, sandstone, etc.
Abrasive materials. Segmenting. Professional 7 REF.
€
50706-230 50706-300 50706-350
MBox A mm
051773 051797 051810
230 300 350
4
1 1 1
Abrasive materials. Turbo. Professional 7
B mm C mm D mm Nº
REF.
22,2 25,4 25,4
50707-230 50707-300 50707-350
7 7 7
2,6 16 2,8 18 3,2 21
Speed Lifespan
€
051834 051858 051872
1 1 1
MBox
A mm
B mm
C mm
D mm
4
230 300 350
22,2 25,4 25,4
7 7 7
2,5 3 3
Speed Lifespan
Other materials:
REF.
€
50722-115 50722-125
222838 222890
1 1
Porcelain tiles. Continuous strip, Professional 7
MBox
A mm
B mm
C mm
D mm
4 4
115 125
22,2 22,2
7 7
1,5 1,5
REF.
50734-115 50734-125
€
525670 525700
1 1
MBox
A mm
B mm
C mm
D mm
4 4
115 125
22,2 22,2
7 7
1,6 1,6
Within ceramic materials are tiles, Catalan tile, fired clay, etc. for use on floors and walls, both interior and exterior.
Porcelain tile, commonly called porcelain, is a ceramic material that, unlike other ceramics, absorbs very little water, which makes it harder.
Speed Lifespan
Speed Lifespan
CUTTING, GRINDING AND DRILLING
Ceramics. Continuous strip, Professional 7
05 Reinforced concrete. Professional 10 REF.
50735-230
€
569308
1
MBox
A mm
B mm
C mm
D mm
4
230
22,2
10
2,6
It is a hard material because of the effect of the reinforcement, which conditions the composition of the binders of the disc
Speed Lifespan
163
Wet cutting Wet cutting discs are intended, both because of their diameters and their composition, to be used for more intensive and continuous work, mainly with stationary machines, cooled with water.
C
• Optimal performance: • Excellent performance: • Good performance:
D
C Segment height D Tooth thickness
For diamond table General building: General construction materials are considered to be those that are commonly used and do not have extreme values of hardness or abrasion. Among these materials are roof tiles, concrete roof tiles, normal bricks, concrete blocks, hydraulic tiles, etc.
B A
General building. Segmenting. Professional 10 €
REF.
50708-300 50708-350
051896 051919
1 1
General building. Segmenting. Professional 7
A mm
B mm
C mm
D mm
Nº
REF.
300 350
25,4 25,4
10 10
2,8 3,2
20 24
50713-300 50713-350
Speed Lifespan
€
405712 314236
1 1
A mm
B mm
C mm
D mm
Nº
300 350
25,4 25,4
10 10
2,8 3
21 25
Speed Lifespan
Hard materials. Segmenting. Professional 10 REF.
€
50724-300 50724-350
223491 223569
1 1
A mm
B mm
C mm
D mm
Nº
300 350
25,4 25,4
10 10
2,8 3,2
18 21
Among these materials are granite, klinker, quartzite, porphyry, cured concrete, etc.
Speed Lifespan
For ceramic cutter Porcelain tiles. Continuous strip, Professional 7 REF.
50732-180 50732-230 50732-300 50732-350
€
373479 373486 373493 373516
1 1 1 1
MBox
A mm
B mm
C mm
D mm
4 4
180 230 300 350
25,4 25,4 25,4 25,4
7 7 7 7
1,6 1,6 2 2,2
Porcelain tile, commonly called porcelain, is a ceramic material that, unlike other ceramics, absorbs very little water, which makes it harder.
Speed Lifespan
164
05
Bits Advantages: • Highest wear resistance. Minimum risk of breakage. • A studied design for perfect drilling. Features: • Hard metal plate. • Thermally-treated body. • For drilled holes with or without percussion. Uses: • For making drilled holes in building materials in general.
A
B C
Cylindrical bit REF.
Cylindrical bit €
51010-4x80 51010-5x90 51010-6x100 51010-8x120 51010-10x140 51010-12x160
512458 512489 512519 512571 512601 512632
1 1 1 1 1 1
MBox
A mm
B mm
C mm
REF.
10 10 10 10 10 10
45 55 60 75 90 110
80 90 100 120 140 160
4,2 5,3 6,3 8,3 10,3 12,3
51011-3x70 51011-4x80 51011-5x90 51011-6x100 51011-6x160 51011-7x110 51011-8x120 51011-8x200 51011-8x400 51011-9x130 51011-10x140 51011-10x400 51011-12x160 51011-12x400 51011-14x160 51011-14x400 51011-16x160 51011-16x400
For drilled holes with percussion. Recommended for building materials in general. DIN 8039 / ISO 5468.
€
512663 512724 512786 512878 512908 513028 513059 513080 513110 513202 513233 513295 513417 513448 513592 513622 513714 513745
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
MBox
A mm
B mm
C mm
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5
40 45 55 60 120 70 75 155 340 85 90 340 110 340 100 340 100 340
70 80 90 100 160 110 120 200 400 130 140 400 160 400 160 400 160 400
3,2 4,2 5,3 6,3 6,3 7,3 8,3 8,3 8,3 9,3 10,3 10,3 12,3 12,3 14,3 14,3 16,3 16,3
For drilled holes with percussion. Recommended for building materials in general. DIN 8039 / ISO 5468.
Cases €
REF.
51011-5 51011-7
518665 518696
CUTTING, GRINDING AND DRILLING
1 1
51011-5 REF.
51011 - 4x80 51011 - 5x90 50011 - 6x90 50011 - 8x120 51011 - 10x140
05
51011-7 CONT.
1 1 1 1 1
REF.
51011 - 4x80 51011 - 5x90 51011 - 6x100 50011 - 7x110 51011 - 8x120 51011 - 10x140 51011 - 12x160
CONT.
1 1 1 1 1 1 1
165
Abrasive discs for cutting, and grinding
05
Advantages: • Excellent performance and accuracy for the job carried out. • Multipurpose use (fine and thick profiles; stainless steel and metal materials). • Wide range. Features: • High-quality raw materials. • Homogeneity of the discs over time. • Different types of grain, thicknesses and diameters of discs. • Complies with the EN-12413 standard. • Three qualities: Maxiplus, Professional and Dynamic. Uses: • For cutting, and grinding with electric portable or stationary machinery.
Professional range 50300 50310
B
50320
A
Cutting disc STAINLESS STEEL-METAL / THIN REF.
€
50300-115 50300-125 50310-115 50310-125 50320-180 50320-230
g
014785 014808 014822 014839 139617 139679
25 25 25 25 25 25
25 30 36 47 100 170
Cutting disc STAINLESS STEEL-METAL
A mm B mm
115 125 115 125 180 230
22,2 22,2 22,2 22,2 22,2 22,2
REF.
1 1 1,6 1,6 1,6 1,9
AS 60 INOX - BF AS 60 INOX - BF AS 46 INOX - BF AS 46 INOX - BF AS 46 INOX - BF AS 46 INOX - BF
Cutting disc STAINLESS STEEL-METAL REF.
€
50301-115 50301-125 50301-150 50301-180 50301-230
g
600711 600728 302721 600735 600742
25 25 25 25 25
68 80 115 165 282
22,2 22,2 22,2 22,2 22,2
REF.
3 3 3 3 3
A 24 R - BF A 24 R - BF A 24 R - BF A 24 R - BF A 24 R - BF
Cutting disc STONE / THIN REF.
50322-115
166
€
25 25 25 25
37 47 100 170
A mm B mm
2,5 2,5 2,5 2,5
A 24 R - BF A 24 R - BF A 24 R - BF A 24 R - BF
300 22,2 3,5 300 25,4 3,5 350 25,4 3,5
AS 24 S - BF AS 24 S - BF AS 24 S - BF
115 125 180 230
22,2 22,2 22,2 22,2
€
50431-300 50441-300 50321-350
g
940961 25 941005 25 600926 25
555 555 800
A mm B mm
Cutting disc STONE g
606768 25
g
373806 374001 374179 374292
Cutting disc for stationary machine METAL
A mm B mm
115 125 150 180 230
€
50330-115 50330-125 50330-180 50330-230
30
A mm B mm
115
22,2
REF.
1
C 60 T - BF
50302-115 50302-125 50302-180 50302-230
€
g
600759 600766 600773 600780
25 25 25 25
58 68 142 230
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
3 3 3 3
C 24 R - BF C 24 R -BF C 24 R - BF C 24 R - BF
Grinding disc STAINLESS STEEL-METAL / HARD REF.
€
50351-115 50351-125 50351-180 50351-230
g
124422 124552 124828 124958
10 10 10 10
170 205 405 640
10
150
Grinding disc STAINLESS STEEL-METAL / SOFT
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
REF.
7 7 7 7
A 30 T - BF A 30 T - BF A 30 T - BF A 30 T - BF
7
C 30 S - BF
€
50361-115 50361-125 50361-180 50361-230
g
125221 125337 125429 125535
10 10 10 10
170 205 405 640
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
7 7 7 7
AS 30 Q - BF AS 30 Q - BF AS 30 Q - BF AS 30 Q - BF
3 3 3 3
AS 30 S - BF AS 30 S - BF AS 30 S - BF AS 30 S - BF
3 3 3 3
A 24 R - BF A 24 R - BF A 24 R - BF A 24 R - BF
Grinding disc STONE REF.
€
50352-115
g
124576
A mm B mm
115
22,2
MAXIPLUS Range
Cutting disc STAINLESS STEEL-METAL REF.
€
50420-115 50420-125 50420-180 50420-230
g
388923 389111 389210 389265
25 25 25 25
60 72 143 245
Cutting disc STAINLESS STEEL-METAL
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
REF.
2,5 2,5 2,5 2,5
AS 30 S - BF AS 30 S - BF AS 30 S - BF AS 30 S - BF
€
50421-115 50421-125 50421-180 50421-230
g
924596 924633 924671 924718
25 25 25 25
68 80 165 282
25 25 25 25
68 80 165 282
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
Cutting disc STAINLESS STEEL-METAL / THIN REF.
50400-115 50400-125
€
g
556506 25 586848 25
25 35
Cutting disc METAL
A mm B mm
115 125
22,2 22,2
REF.
1 1
AS 60 INOX - BF AS 60 INOX - BF
€
50480-115 50480-125 50480-180 50480-230
g
446999 512656 512564 447057
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
CUTTING, GRINDING AND DRILLING
DYNAMIC Range
05
Cutting disc STONE REF.
50482-115 50482-230
€
447118 25 447163 25
g
A mm B mm
58 230
115 22,2 230 22,2
3 3
C 24 R - BF C 24 R - BF
167
Abrasives stand
A
50495 REF.
C
B
Stand €
REF.
50495
018349
1
A mm
B mm
C mm
530
530
280
CONT.
50 50 50 50 50 50
50300-115 50300-125 50320-230 50301-115 50301-230 50302-115
Strip discs
05
Professional strip discs for surface finishing: maintenance work, finishing tasks repair of farming tools, welding, settings, etc. GRAIN: • A: universal, Ideal for steel, iron, wood. • AZ: demanding work, high removal capacity, ideal for stainless steel and forgery. • SiC: stone, glass, plastic – non-ferrous materials. SIZE OF GRAIN: • 40-60: average grain for rough surface finishes. • 80-120: fine grain for fine surface finishes.
Polyamide base Features: • Adequate flat base for flat surface finishes. • Does not stain or scratch the worked surface. • Improved disc usage as the nylon base can be worn during the work. • Cotton support fabrics that offer a very good finishing sensation and avoid burn marks on the material, making the discs to be very adequate for working with stainless steel • Longer useful life: +15% more filing capacity that fibreglass based discs.
METAL – CORUNDUM (A) REF.
STAINLESS STEEL-METAL / AGGRESSIVE – ZIRCONIUM (AZ)
€
50501-40 50501-60 50501-80 50501-120
601152 601169 601176 601220
10 10 10 10
g
A mm
B mm
112 108 101 92
115 115 115 115
22,2 22,2 22,2 22,2
REF.
A 40 A 60 A 80 A 120
For grinding work in steel sheets and cleaning of various surfaces (rust, paint).
STONE – SILICON CARBIDE (SIC) REF.
50503-40 50503-60 50503-80 50503-120
€
601244 601251 601268 601275
10 10 10 10
g
A mm
B mm
112 108 101 92
115 115 115 115
22,2 22,2 22,2 22,2
For grinding work in stone, plastics and non ferrous materials.
168
SIC 40 SIC 60 SIC 80 SIC 120
50502-40 50502-60 50502-80 50502-120
€
601190 601206 601213 601237
10 10 10 10
g
A mm
B mm
112 108 101 92
115 115 115 115
22,2 22,2 22,2 22,2
For demanding grinding work in stainless steel and cas iron.
AZ 40 AZ 60 AZ 80 AZ 120
Fibreglass base Features: • Fibreglass slanted base for edge finishing works. • Does not stain the worked surface • Very good performance thanks to the polyester support fabrics.
METAL – CORUNDUM (A) 50511-40 50511-60 50511-80 50511-120 50551-40 50551-60 50551-80 50611-40 50611-60 50611-80
STAINLESS STEEL-METAL / AGGRESSIVE – ZIRCONIUM (AZ)
€
941302 941333 941364 941395 300154 300314 300390 941661 941692 941722
10 10 10 10 10 10 10 10 10 10
g
A mm
B mm
90 80 75 70 90 90 80 225 220 200
115 115 115 115 125 125 125 180 180 180
22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2
REF.
A 40 A 60 A 80 A 120 A 40 A 60 A 80 A 40 A 60 A 80
For grinding work in steel sheets and cleaning of various surfaces (rust, paint).
€
50512-40 50512-60 50512-80 50512-120 50552-40 50552-60 50552-80 50612-40 50612-60 50612-80
941425 941456 941487 941517 300659 300789 300857 941784 941814 941845
10 10 10 10 10 10 10 10 10 10
g
A mm
B mm
90 80 75 70 110 110 90 225 220 200
115 115 115 115 125 125 125 180 180 180
22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2
AZ 40 AZ 60 AZ 80 AZ 120 AZ 40 AZ 60 AZ 80 AZ 40 AZ 60 AZ 80
For demanding grinding work in stainless steel and cas iron.
STONE – SILICON CARBIDE (SIC) REF.
€
50513-40 50513-60 50513-80 50513-120
941548 941579 941609 941630
10 10 10 10
g
A mm
B mm
80 75 70 65
115 115 115 115
22,2 22,2 22,2 22,2
SIC 40 SIC 60 SIC 80 SIC 120
For grinding work in stone, plastics and non ferrous materials.
Strips stand
Stand REF.
50953 50954
€
608595 608632
50953 REF.
395x265x135 mm
50511-40 50511-80 50512-40 50512-80 50513-40 50513-80
1 1
Fibreglass base discs stand Polyamide base discs stand
50954 CONT.
10 10 10 10 10 10
REF.
50501-40 50501-80 50502-40 50502-80 50503-40 50503-80
CONT.
5 5 5 5 5 5
169
CUTTING, GRINDING AND DRILLING
REF.
05