CUTTING AND GRINDING
DIAMOND
Diamond discs
Hard materials: Hard materials are considered to be those with extreme values of hardness and average abrasion. Among these materials are granite, klinker, quartzite, porphyry, refractory brick, cured concrete, etc.
DRY CUTTING Dry cutting discs are intended, both because of their diameters and their composition, to be used on portable machines where cooling is caused by air. Discs are chosen in function of the desired finish, the material to be cut, and the user’s preferences.
General purpose: General construction materials are considered to be those that are commonly used and do not have extreme values of hardness or abrasion. Among these materials are roof tiles, concrete roof tiles, terrazzo, bricks, concrete blocks, hydraulic tiles, etc.
B A
Hard materials. Segmenting. Professional 7 REF.
50704-115 50704-125 50704-180 50704-230
€
34,33 37,19 59,50 74,53
MBox A mm
051612 051636 051650 051674
REF.
22,2 22,2 22,2 22,2
50705-115 50705-125 50705-180 50705-230
115 125 180 230
4 4 4 4
1 1 1 1
Hard materials. Turbo. Professional 7
B mm C mm D mm Nº
7 7 7 7
2,1 9 2,2 10 2,4 12 2,4 16
€
28,85 33,42 51,41 78,75
051698 051711 051735 051759
1 1 1 1
MBox
A mm
B mm
C mm
D mm
4 4 4 4
115 125 180 230
22,2 22,2 22,2 22,2
7 7 7 7
2,1 2,1 2,6 2,8
B
Abrasive materials: Abrasive materials are considered to be those that are not very hard, but which wear out discs quickly because of their highly abrasive capacity. Among these materials are green concrete, aerated concrete blocks, old concrete, silica terrazzo, asphalt, normal brick, sandstone, etc.
C
B
A
General purpose. Segmenting. Professional 7 REF.
€
MBox A mm
50702-115 28,35 051452 50702-125 30,31 051476 50702-180 47,94 051490 50702-230 56,13 051513
1 1 1 1
4 4 4 4
115 125 180 230
Abrasive materials. Segmenting. Professional 7
General purpose. Turbo. Professional 7
B mm C mm D mm Nº
REF.
22,2 22,2 22,2 22,2
50703-115 50703-125 50703-180 50703-230
7 7 7 7
2,1 2,2 2,4 2,6
8 9 13 15
€
22,87 24,53 37,64 57,29
051537 051551 051575 051599
1 1 1 1
MBox
A mm
B mm
C mm
D mm
4 4 4 4
115 125 180 230
22,2 22,2 22,2 22,2
7 7 7 7
2,1 2,1 2,6 2,8
REF.
€
MBox A mm
50706-230 77,44 051773 50706-300 121,66 051797 50706-350 166,78 051810
€
REF.
22,2 25,4 25,4
50707-230 89,30 051834 50707-300 145,48 051858 50707-350 163,52 051872
230 300 350
4
1 1 1
Abrasive materials. Turbo. Professional 7
B mm C mm D mm Nº
7 7 7
2,6 16 2,8 18 3,2 21
1 1 1
MBox
A mm
B mm
C mm
D mm
4
230 300 350
22,2 25,4 25,4
7 7 7
2,5 3 3
Other materials:
General purpose. Segmenting. Pro 7 REF.
50711-115 50711-125 50711-180 50711-230
€
15,48 22,82 32,57 35,48
MBox A mm
405453 405484 405514 405545
1 1 1 1
4 4 4 4
115 125 180 230
50722-115 50722-125
General purpose. Turbo. Pro7 B mm C mm D mm Nº
REF.
22,2 22,2 22,2 22,2
50712-115 50712-125 50712-180 50712-230
7 7 7 7
2,2 8 2,2 10 2,4 14 2,4 16
€
15,08 17,04 28,14 38,55
405576 405613 405644 405675
1 1 1 1
MBox
A mm
B mm
C mm
D mm
4 4 4 4
115 125 180 230
22,2 22,2 22,2 22,2
7 7 7 7
2 2 2,3 2,5
€
16,44 18,80
222838 222890
1 1
Porcelain tiles. Continuous strip, Professional 7
MBox
A mm
B mm
C mm
D mm
4 4
115 125
22,2 22,2
7 7
1,5 1,5
Within ceramic materials are tiles, Catalan tile, fired clay, etc. for use on floors and walls, both interior and exterior.
REF.
50734-115 50734-125
€
23,77 27,09
525670 525700
1 1
MBox
A mm
B mm
C mm
D mm
4 4
115 125
22,2 22,2
7 7
1,6 1,6
Porcelain tile, commonly called porcelain, is a ceramic material that, unlike other ceramics, absorbs very little water, which makes it harder.
Reinforced concrete. Professional 10 REF.
50735-230
€
95,28
569308
1
MBox
A mm
B mm
C mm
D mm
4
230
22,2
10
2,6
It is a hard material because of the effect of the reinforcement, which conditions the composition of the binders of the disc
158
159
CUTTING AND GRINDING
Ceramics. Continuous strip, Professional 7 REF.
ABRASIVE DISCS FOR CUTTING AND GRINDING
DIAMOND / WET CUTTING FOR DIAMOND GRINDING
Abrasive cutting and grinding discs
WET CUTTING FOR DIAMOND GRINDING
Advantages: • Excellent performance and accuracy for the job carried out. • Multipurpose use (fine and thick profiles; stainless steel and metal materials). • Wide range. Features: • High-quality raw materials. • Homogeneity of the discs over time. • Different types of grain, thicknesses and diameters of discs. • Complies with the EN-12413 standard. • Three qualities: Maxiplus, Professional and Dynamic. Uses: • For cutting, and grinding with electric portable or stationary machinery.
Wet cutting discs are intended, both because of their diameters and their composition, to be used for more intensive and continuous work, mainly with stationary machines, cooled with water.
General purpose General construction materials are considered to be those that are commonly used and do not have extreme values of hardness or abrasion. Among these materials are roof tiles, concrete roof tiles, normal bricks, concrete blocks, hydraulic tiles, etc.
B C
PROFESSIONAL RANGE 50300 50310
B A
50320 B A
General purpose. Segmenting. Professional 10 €
REF.
50708-300 50708-350
137,24 178,09
051896 051919
1 1
General purpose. Segmenting. Professional 7
A mm
B mm
C mm
D mm
Nº
REF.
300 350
25,4 25,4
10 10
2,8 3,2
20 24
50713-300 50713-350
€
83,47 102,21
405712 314236
1 1
A mm
B mm
C mm
D mm
Nº
300 350
25,4 25,4
10 10
2,8 3
21 25
Cutting disc STAINLESS STEEL-METAL / THIN REF.
50300-115 50300-125 50310-115 50310-125 50320-180 50320-230
€
1,29 1,41 1,37 1,55 2,45 2,63
g
014785 014808 014822 014839 139617 139679
25 25 25 25 25 25
25 30 36 47 100 170
Cutting disc STAINLESS STEEL-METAL
A mm B mm
115 125 115 125 180 230
22,2 22,2 22,2 22,2 22,2 22,2
REF.
1 1 1,6 1,6 1,6 1,9
AS 60 INOX - BF AS 60 INOX - BF AS 46 INOX - BF AS 46 INOX - BF AS 46 INOX - BF AS 46 INOX - BF
50330-115 50330-125 50330-180 50330-230
€
1,37 1,47 1,89 2,75
g
373806 374001 374179 374292
25 25 25 25
37 47 100 170
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
2,5 2,5 2,5 2,5
A 24 R - BF A 24 R - BF A 24 R - BF A 24 R - BF
300 22,2 3,5 300 25,4 3,5 350 25,4 3,5
AS 24 S - BF AS 24 S - BF AS 24 S - BF
Hard materials. Segmenting. Professional 10 €
REF.
50724-300 50724-350
113,22 162,01
223491 223569
1 1
A mm
B mm
C mm
D mm
Nº
300 350
25,4 25,4
10 10
2,8 3,2
18 21
Among these materials are granite, klinker, quartzite, porphyry, cured concrete, etc.
REF.
50301-115 50301-125 50301-150 50301-180 50301-230
€
1,37 1,47 1,79 1,89 2,75
g
600711 600728 302721 600735 600742
25 25 25 25 25
68 80 115 165 282
Cutting disc for stationary machine METAL
A mm B mm
115 125 150 180 230
22,2 22,2 22,2 22,2 22,2
REF.
3 3 3 3 3
A 24 R - BF A 24 R - BF A 24 R - BF A 24 R - BF A 24 R - BF
50431-300 50441-300 50321-350
€
7,29 7,29 11,66
g
940961 25 941005 25 600926 25
555 555 800
A mm B mm
Porcelain tiles. Continuous strip, Professional 7 REF.
€
50732-180 55,38 373479 50732-230 83,62 373486 50732-300 137,49 373493 50732-350 179,05 373516
1 1 1 1
MBox
A mm
B mm
C mm
D mm
4 4
180 230 300 350
25,4 25,4 25,4 25,4
7 7 7 7
1,6 1,6 2 2,2
Porcelain tile, commonly called porcelain, is a ceramic material that, unlike other ceramics, absorbs very little water, which makes it harder.
Cutting disc STONE / THIN REF.
50322-115
160
€
1,51
Cutting disc STONE g
606768 25
30
A mm B mm
115
22,2
REF.
1
C 60 T - BF
50302-115 50302-125 50302-230
€
1,50 1,61 3,07
600759 25 600766 25 600780 25
g
A mm B mm
58 68 230
115 22,2 125 22,2 230 22,2
3 3 3
C 24 R - BF C 24 R -BF C 24 R - BF
161
CUTTING AND GRINDING
Cutting disc STAINLESS STEEL-METAL
WET CUTTING FOR CERAMIC CUTTER
STRIP DISCS
ABRASIVE DISCS FOR CUTTING AND GRINDING / PROFESSIONAL RANGE
Grinding disc STAINLESS STEEL-METAL / HARD €
50351-115 50351-125 50351-180 50351-230
1,96 2,21 3,77 5,08
g
124422 124552 124828 124958
10 10 10 10
170 205 405 640
Grinding disc STAINLESS STEEL-METAL / SOFT
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
REF.
7 7 7 7
A 30 T - BF A 30 T - BF A 30 T - BF A 30 T - BF
50361-115 50361-125 50361-180 50361-230
€
1,96 2,21 3,77 5,08
g
125221 125337 125429 125535
10 10 10 10
170 205 405 640
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
7 7 7 7
AS 30 Q - BF AS 30 Q - BF AS 30 Q - BF AS 30 Q - BF
POLYAMIDE BASE
Grinding disc STONE €
REF.
50352-115
2,17
g
124576
Professional strip discs for surface finishing: maintenance work, finishing tasks repair of farming tools, welding, settings, etc. GRAIN: • A: universal, Ideal for steel, iron, wood. • AZ: demanding work, high removal capacity, ideal for stainless steel and forgery. • SIC: stone, glass, plastic – non-ferrous materials. SIZE OF GRAIN: • 40-60: average grain for rough surface finishes. • 80-120: fine grain for fine surface finishes.
10
150
Features: • Adequate flat base for flat surface finishes. • Does not stain or scratch the worked surface. • Improved disc usage as the nylon base can be worn during the work. • Cotton support fabrics that offer a very good finishing sensation and avoid burn marks on the material, making the discs to be very adequate for working with stainless steel • Longer useful life: +15% more filing capacity that fibreglass based discs.
A mm B mm
115
22,2
7
C 30 S - BF
MAXIPLUS RANGE
Cutting disc STAINLESS STEEL-METAL €
REF.
50420-115 50420-230
1,77 3,57
g
388923 25 389265 25
60 245
Cutting disc STAINLESS STEEL-METAL
A mm B mm
REF.
115 22,2 2,5 230 22,2 2,5
AS 30 S - BF AS 30 S - BF
50421-115 50421-125 50421-180 50421-230
€
1,77 1,90 2,46 3,57
g
924596 924633 924671 924718
25 25 25 25
68 80 165 282
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
3 3 3 3
AS 30 S - BF AS 30 S - BF AS 30 S - BF AS 30 S - BF
DYNAMIC RANGE
50400-115 50400-125
€
0,83 0,91
g
556506 25 586848 25
50501-40 50501-60 50501-80 50501-120
STAINLESS STEEL-METAL / AGGRESSIVE – ZIRCONIUM (AZ)
€
6,84 6,84 6,84 6,84
601152 601169 601176 601220
10 10 10 10
g
A mm
B mm
112 108 101 92
115 115 115 115
22,2 22,2 22,2 22,2
REF.
A 40 A 60 A 80 A 120
For grinding work in steel sheets and cleaning of various surfaces (rust, paint).
Cutting disc STAINLESS STEEL-METAL / THIN REF.
METAL – CORUNDUM (A) REF.
25 35
22,2 22,2
REF.
1 1
€
7,64 7,64 7,64 7,64
601190 601206 601213 601237
10 10 10 10
g
A mm
B mm
112 108 101 92
115 115 115 115
22,2 22,2 22,2 22,2
AZ 40 AZ 60 AZ 80 AZ 120
For demanding grinding work in stainless steel and cas iron.
Cutting disc METAL
A mm B mm
115 125
50502-40 50502-60 50502-80 50502-120
AS 60 INOX - BF AS 60 INOX - BF
50480-115 50480-125 50480-180 50480-230
€
0,75 0,83 1,55 1,73
g
446999 512656 512564 447057
25 25 25 25
68 80 165 282
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
3 3 3 3
50953
A 24 R - BF A 24 R - BF A 24 R - BF A 24 R - BF
REF.
CONT.
10 10 10 10 10 10
50511-40 50511-80 50512-40 50512-80 50513-40 50513-80
395x265x135 mm
STONE – SILICON CARBIDE (SIC) REF.
Cutting disc STONE REF.
50482-115 50482-230
162
€
0,75 1,75
447118 25 447163 25
g
A mm B mm
58 230
115 22,2 230 22,2
3 3
C 24 R - BF C 24 R - BF
50503-40 50503-60 50503-80 50503-120
€
7,39 7,39 7,39 7,39
601244 601251 601268 601275
10 10 10 10
Fibreglass base discs exhibitor g
A mm
B mm
112 108 101 92
115 115 115 115
22,2 22,2 22,2 22,2
REF.
SIC 40 SIC 60 SIC 80 SIC 120
50953
€
255,07 608595
1
For grinding work in stone, plastics and non ferrous materials.
163
CUTTING AND GRINDING
REF.
Strip discs
BRUSHES
STRIP DISCS / FIBREGLASS BASE
Brushes
FIBREGLASS BASE
Advantages: • Excellent performance and accuracy for the job carried out. • Optimal finishes. • Comfortable brushing action. • Long-lasting tools. • Multipurpose. • Extensive range (diameters, types of wire, shape) for different applications. Features: • High wear resistance. • High-quality raw materials (ø 0.3 mm wire and nylon). • The right amount of wire or nylon. Uses: • For brushing, cleaning jobs, removing paint, varnish, flakes, rust and small burr.
Features: • Fibreglass slanted base for edge finishing works. • Does not stain the worked surface. • Very good performance thanks to the polyester support fabrics.
METAL – CORUNDUM (A) REF.
50511-40 50511-60 50511-80 50511-120 50551-40 50551-60 50551-80 50611-40 50611-60 50611-80
4,78 4,78 4,78 4,78 5,43 5,43 5,43 9,40 9,40 9,40
V: Max. r.p.m.
STAINLESS STEEL-METAL / AGGRESSIVE – ZIRCONIUM (AZ)
€
941302 941333 941364 941395 300154 300314 300390 941661 941692 941722
10 10 10 10 10 10 10 10 10 10
g
A mm
B mm
90 80 75 70 90 90 80 225 220 200
115 115 115 115 125 125 125 180 180 180
22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2
€
REF.
A 40 A 60 A 80 A 120 A 40 A 60 A 80 A 40 A 60 A 80
For grinding work in steel sheets and cleaning of various surfaces (rust, paint).
50512-40 50512-60 50512-80 50512-120 50552-40 50552-60 50552-80 50612-40 50612-60 50612-80
5,43 5,43 5,43 5,43 6,03 6,03 6,03 9,50 9,50 9,50
941425 941456 941487 941517 300659 300789 300857 941784 941814 941845
10 10 10 10 10 10 10 10 10 10
g
A mm
B mm
90 80 75 70 110 110 90 225 220 200
115 115 115 115 125 125 125 180 180 180
22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2
AZ 40 AZ 60 AZ 80 AZ 120 AZ 40 AZ 60 AZ 80 AZ 40 AZ 60 AZ 80
H: Number of rows.
HANDHELD BRUSHES • For general light brushing jobs. • Stainless steel for stainless steel surfaces. • Brass wires for nonferrous metals and anti-spark jobs. • Without handle for tough jobs. • Plastic handle for difficult to access areas (slots, etc.).
For demanding grinding work in stainless steel and cas iron.
A
B Brushes 50801 50801-3 50801-4 50801-5
STONE – SILICON CARBIDE (SIC) REF.
50513-40 50513-60 50513-80 50513-120
€
5,23 5,23 5,23 5,23
941548 941579 941609 941630
10 10 10 10
g
A mm
B mm
80 75 70 65
115 115 115 115
22,2 22,2 22,2 22,2
Brushes 50802 €
REF.
1,11 1,29 1,66
372380 372427 372465
1 1 1
g
A mm
B mm
H
REF.
112 140 170
295 295 295
25 25 25
3 4 5
50802-3 50802-4 50802-5
Brass coated steel. ø 0.3 straight wire.
€
3,98 4,81 5,75
372502 372540 372588
g
A mm
B mm
H
1 1 1
112 140 170
295 295 295
25 25 25
3 4 5
g
A mm
B mm
H
1
190
210
35
5
Stainless steel. ø 0.3 straight wire.
SIC 40 SIC 60 SIC 80 SIC 120
For grinding work in stone, plastics and non ferrous materials.
Brushes 50803 REF.
50803-3 50803-4 50803-5
Brushes 50804 €
2,36 3,14 4,21
372625 372663 372700
Brass. ø 0.3 corrugated wire.
1 1 1
g
A mm
B mm
H
REF.
112 140 170
295 295 295
25 25 25
3 4 5
50804-5
€
1,96
372748
Brass coated steel. ø 0.3 straight wire.
50954 REF.
395x265x135 mm
Polyamide base discs stand REF.
50954
164
€
181,26 608632
50501-40 50501-80 50502-40 50502-80 50503-40 50503-80
CONT.
5 5 5 5 5 5
1
165
CUTTING AND GRINDING
EXHIBITOR
BRUSHES / HANDHELD BRUSHES
CIRCULAR INDUSTRIAL BRUSHES • Removing rust, paint and burr. • Braided wire recommended for jobs requiring increased brushing capacity. • Multi-axe adaptor. A Brushes 50806-I
Brushes 50806-A €
REF.
50806-A
1,51
372823
24
g
A mm
B mm
H
REF.
38
265
30
1
50806-I
Brass coated steel. ø 0.3 straight wire.
€
4,59
372861
24
g
A mm
B mm
H
38
265
30
1
Stainless steel. ø 0.3 corrugated wire.
B Brushes 50810 50810-10016 50810-10020 50810-12518 50810-12525 50810-15018 50810-15025 50810-17520 50810-17525 50810-20020 50810-20025
Brushes 50806-L €
REF.
50806-L
4,37
372908
24
g
A mm
B mm
H
38
265
25
1
Brass. ø 0.3 corrugated wire.
DIY BRUSHES
Brushes 50811 €
REF.
8,35 11,72 9,01 13,99 11,28 15,76 13,11 17,86 14,98 21,12
g
373387 373424 373462 373509 373547 373585 373622 373660 373707 373745
1 1 1 1 1 1 1 1 1 1
A mm B mm
H
V
100 100 125 125 150 150 175 175 200 200
5 6 5 7 5 7 5 7 5 7
8.000 8.000 8.000 8.000 6.000 6.000 6.000 6.000 4.500 4.500
205 229 283 330 450 550 630 720 790 920
16 20 18 25 18 25 20 25 20 25
Brass coated steel. ø 0.3 corrugated wire. Supplied with up to nine different axes.
€
REF.
50811-100 50811-115 50811-150 50811-175
14,65 14,98 18,14 20,51
g
373783 373936 374124 374162
A mm B mm
H
V
100 115 150 175
1 1 1 1
12.500 12.500 9.000 9.000
239 272 500 686
1 1 1 1
20 23 37 42
Toughened steel. ø 0.5 braided wire.
• General used brushes for normal drills up to a maximum of 4,500 rpm. • Cleaning and removing paints, varnishes, rust, small burr from practically any material and relatively easy jobs. • 6 mm bolt. A
INDUSTRIAL CUP BRUSHES • For working on large metal surfaces using angle grinders and mini grinders in areas which are difficult to access. • The braided wire removes the need for the ring providing more millimetres of wire. B
50807-50 50807-60 50807-75 50807-100
Cup brushes 50808
€
1,28 1,28 1,66 2,46
373066 373103 373141 373189
24 24 24 12
g
A mm
B mm
V
33 42 70 105
50 60 75 100
12 13 16 24
4.500 4.500 4.500 4.500
Brass coated steel. ø 0.3 corrugated wire.
REF.
50808-50 50808-75 50808-80
€
1,66 2,49 2,97
373226 373264 936193
24 24 12
g
A mm
B mm
V
63 120 196
50 75 80
18 25 23
4.500 4.500 4.500
Brass coated steel. ø 0.3 corrugated wire.
Brushes 50812 REF.
50812-80 50812-100 50812-125
Brushes 50813 €
11,56 14,16 20,79
374209 374247 374285
1 1 1
g
A mm
B mm
V
230 399 620
80 100 125
30 30 35
8.500 8.500 6.500
Brass coated steel. ø 0.3 corrugated wire.
REF.
50813-80 50813-100 50813-120
€
16,48 17,53 22,11
374322 374360 374407
g
A mm
B mm
V
1 1 1
685 875 1.065
80 100 120
22 22 22
8.500 8.500 6.500
g
A mm
B mm
V
1
280
65
20
12.500
Toughened steel. ø 0.5 braided wire.
50850 REF.
CONT.
6 6 6 6 6 6
50807-50 50807-75 50807-100 50808-50 50808-75 50809-25
Drill brushes 50809 REF.
50809-25
€
2,34
373301
24
Brass coated steel. ø 0.3 corrugated wire.
166
Brushes 50814-75
Brush stand 50850 g
A mm
B mm
V
55
25
30
4.500
REF.
50850
REF.
€
70,59
904031
1
g
A mm
B mm
C mm
3.500
230
380
400
50814-75
Brushes 50814-65
€
11,23
374445
1
g
A mm
B mm
V
215
75
30
12.500
Use with mini grinders. Brass coated steel. ø 0.3 corrugated wire.
REF.
50814-65
€
10,51
374483
Use with mini grinders. Toughened steel. ø 0.5 braided wire.
167
CUTTING AND GRINDING
Circular brushes 50807 REF.
BRUSHES / CONICAL INDUSTRIAL BRUSHES
CONICAL INDUSTRIAL BRUSHES
INDUSTRIAL NYLON BRUSHES • Manufactured with highly flexible nylon filaments preventing the breakage with carbon silicate abrasive grains. • Two types of grain: - Thick red, 80 grain. - Thin blue, 180 grain. • With 6 mm shaft to fit into standard drills.
• For use with mini grinders.
A Brushes 50815
Brushes 50816 €
REF.
50815-1001 50815-1002
g
11,56 374520 21,56 374568
A mm B mm
12 181 100 12 274 100
20 20
H
V
1 2
12.500 12.500
Brass coated steel. ø 0.3 corrugated wire.
€
REF.
50816-1001 50816-1002
g
24,22 374605 36,49 374643
A mm B mm
12 181 100 12 274 100
20 20
H
V
1 2
12.500 12.500
Stainless steel. ø 0.3 corrugated wire.
B Circular brushes 50825 REF.
50825-75B 50825-75F 50825-100B 50825-100F
Brushes 50817 €
REF.
50817-1001 50817-1151
g
12,17 374681 14,16 374728
A mm B mm
12 215 100 12 405 115
20 20
H
V
1 2
12.500 12.500
Cup brushes 50826
€
4,92 5,15 5,97 6,20
375244 375602 375329 375282
24 24 12 12
g
A mm
B mm
V
75 75 120 120
75 75 100 100
16 16 23 23
4.500 4.500 4.500 4.500
€
REF.
50826-50B 50826-50F 50826-75B 50826-75F
4,81 4,92 5,15 5,31
375404 375367 375480 375442
g
A mm
B mm
73 73 130 130
50 50 75 75
18 18 25 25
4.500 4.500 4.500 4.500
g
A mm
B mm
C mm
1.125
230
380
400
24 24 24 24
V
Toughened steel. ø 0.5 braided wire.
50851 REF.
50825-75F 50825-75B 50825-100F 50825-100B 50826-75F 50826-75B
ENCAPSULATED INDUSTRIAL BRUSHES • With 6 mm shaft to fit into drills. • Resin covered to provide: - Better performance and accuracy: the wire does not bend. • Maximum safety, the wire does not break off. Drill brushes 50827 REF.
50827-25B 50827-25F
Brushes 50822
CONT
3 3 3 3 3 3
50826-50F 50826-50B 50827-25F 50827-25B 50829-100F 50829-100B
375565 375527
24 24
g
A mm
B mm
V
67 67
25 25
25 25
4.500 4.500
REF.
50851
€
169,60
213850
1
12,28
375084
24
g
A mm
B mm
V
96
75
30
15.000
Brass coated steel. ø 0.3 corrugated wire.
€
REF.
50824-30
12,28
375169
24
g
A mm
B mm
V
96
31
25
15.000
Brass coated steel. ø 0.3 corrugated wire.
CUTTING AND GRINDING
50822-75
REF.
Brushes 50824 €
REF.
3 3 3 3 3 3
Industrial brush Stand 50851
€
3,93 4,10
CONT
INDUSTRIAL FAN BRUSHES • Recommended for cleaning of services which are difficult to access. • Nylon filaments with carbon silicate abrasive grains. • Thick grain 80 (red) and thin grain 180 (blue).
Brushes 50829 REF.
50829-100B 50829-100F
168
€
6,36 6,36
961034 961072
12 12
g
A mm
B mm
V
80 120
100 100
25 25
3.500 3.500
169