CUTTING AND GRINDING
DIAMOND
Diamond discs • Top quality, large, octagonal shaped diamonds for maximum performance and service life of the disc. • Diamonds are homogenous so that they are all of the same quality right around the rim of the disc. • Perfect joint between the core and segment which makes two parts into a single element. • Laser marking prevents information from being lost or the disc blade slowing down or becoming blunt. • Different types of segments: - Segmented discs allow higher cutting speed. - Turbo discs provides greater finishing quality and cleaner cutting than segmented discs. - Continuous band discs ensure fine a accurate cutting.
Diamond Disc Hard Materials . Turbo. Professional 50704 REF.
50704-115 50704-125 50704-180 50704-230
Uses: • To use in air cooled portable machines. • General purpose: cutting of materials not having extreme values of hardness or abrasion: roof tiles, terrazzo, bricks, concrete blocks, hydraulic tiles, etc. • Hard materials: cutting of materials with extreme values of hardness and average abrasion: granite, klinker, quartzite, porphyry, refractory brick, cured concrete, etc. • Abrasive materials: cutting of materials not very hard, but wearing out discs quickly because of their highly abrasive capacity: blocks, old concrete, silica terrazzo, asphalt, normal brick, sandstone, etc. • Ceramics materials: cutting of ceramic and porcelain materials.
€
35,76 38,74 61,98 77,64
MBox A mm
051612 051636 051650 051674
REF.
22,2 22,2 22,2 22,2
50705-115 50705-125 50705-180 50705-230
115 125 180 230
4 4 4 4
1 1 1 1
7 7 7 7
2,1 9 2,2 10 2,4 12 2,4 16
Diamond Disc Abrasive Materials . Turbo. Professional 50706 REF.
€
MBox A mm
50706-230 80,68 051773 50706-300 126,75 051797 50706-350 173,75 051810
MBox A mm
50702-115 29,53 051452 50702-125 31,58 051476 50702-180 49,94 051490 50702-230 58,47 051513
1 1 1 1
4 4 4 4
115 125 180 230
50707-230 93,04 051834 50707-300 151,57 051858 50707-350 170,36 051872
REF.
22,2 22,2 22,2 22,2
50703-115 50703-125 50703-180 50703-230
7 7 7 7
2,1 2,2 2,4 2,6
8 9 13 15
Diamond Disc General Purpose. Turbo. Pro 50711 50711-115 50711-125 50711-180 50711-230
154
€
16,12 23,78 33,93 36,96
MBox A mm
405453 405484 405514 405545
1 1 1 1
4 4 4 4
115 125 180 230
A mm
B mm
C mm
D mm
4 4 4 4
115 125 180 230
22,2 22,2 22,2 22,2
7 7 7 7
2,1 2,1 2,6 2,8
1 1 1
MBox
A mm
B mm
C mm
D mm
4
230 300 350
22,2 25,4 25,4
7 7 7
2,5 3 3
Diamond Disc General Purpose. Laser. Professional 50703
B mm C mm D mm Nº
€
23,83 25,56 39,21 59,69
051537 051551 051575 051599
1 1 1 1
MBox
A mm
B mm
C mm
D mm
4 4 4 4
115 125 180 230
22,2 22,2 22,2 22,2
7 7 7 7
2,1 2,1 2,6 2,8
Diamond Disc Ceramic. Continuous Rim. Professional 50722 REF.
50722-115 50722-125
€
17,13 19,59
222838 222890
1 1
MBox
A mm
B mm
C mm
D mm
4 4
115 125
22,2 22,2
7 7
1,5 1,5
Within ceramic materials are tiles, Catalan tile, fired clay, etc. for use on floors and walls, both interior and exterior.
REF.
€
22,2 25,4 25,4
2,6 16 2,8 18 3,2 21
MBox
Diamond Disc Abrasive Materials. Laser. Professional 50707 REF.
7 7 7
1 1 1 1
50734-115 50734-125
€
24,76 28,22
525670 525700
1 1
MBox
A mm
B mm
C mm
D mm
4 4
115 125
22,2 22,2
7 7
1,6 1,6
Porcelain tile, is a ceramic material that, unlike other ceramics, absorbs very little water, which makes it harder.
Diamond Disc General Purpose. Laser. Pro 50712
B mm C mm D mm Nº
REF.
22,2 22,2 22,2 22,2
50712-115 50712-125 50712-180 50712-230
7 7 7 7
Diamond Disc Ceramic. Continuous Rim. Professional 50734 REF.
2,2 8 2,2 10 2,4 14 2,4 16
€
15,71 17,75 29,31 40,16
405576 405613 405644 405675
1 1 1 1
MBox
A mm
B mm
C mm
D mm
4 4 4 4
115 125 180 230
22,2 22,2 22,2 22,2
7 7 7 7
2 2 2,3 2,5
Diamond Disc Reinforced Concrete. Laser. Professional 50735 REF.
50735-230
€
99,26
569308
1
MBox
A mm
B mm
C mm
D mm
4
230
22,2
10
2,6
It is a hard material because of the effect of the reinforcement, which conditions the composition of the binders of the disc.
155
CUTTING AND GRINDING
Diamond Disc General Purpose. Turbo. Professional 50702 €
051698 051711 051735 051759
B
A
REF.
€
30,05 34,82 53,55 82,04
B mm C mm D mm Nº
230 300 350
4
1 1 1
Diamond Disc Hard Materials. Laser. Professional 50705
B mm C mm D mm Nº
DIAMOND
ABRASIVE DISCS FOR CUTTING AND GRINDING
Diamond discs wet cutting
Abrasive discs
• Top quality, large, octagonal shaped diamonds for maximum performance and service life of the disc. • Diamonds are homogenous so that they are all of the same quality right around the rim of the disc. • Perfect joint between the core and segment which makes two parts into a single element. • Laser marking that prevents information from being lost or the disc blade slowing down or becoming blunt.
• Complies with the EN-12413 standard. • High-quality raw materials. • Mixures developped to ensure an optimum performance-cutting sensation relation. • Homogeneity of the discs over time. • Excellent speed, cutting feeling and finish.
Uses: • For stationary machines both water-cooled diamond cutting tables and ceramic cutting. • General purpose: cutting of materials not having extreme values of hardness or abrasion: roof tiles, terrazzo, bricks, concrete blocks, hydraulic tiles, etc. • Hard materials: cutting of materials with extreme values of hardness and average abrasion: granite, klinker, quartzite, porphyry, refractory brick, cured concrete, etc. • Ceramics materials: cutting of ceramic and porcelain materials.
Uses: • For cutting, and grinding with electric portable or stationary machinery. • Inox-Metal discs: 1-2mm thick for tasks on thin metal sheet and up to 3mm profiles and assembly with perfect finishing. 2-3mm thick for heavy duty cutting and thick profiles jobs. • Stone discs: 1mm thick for tasks on stone, ceramic, copper profiles, aluminium, brass and plastic. 3mm thick for heavy duty jobs on concrete, brick, stone and ceramic. • Three types of grain: - A - Corundum: hight tenacity grain for professional cutting and grinding. - AS - Semi-friable corundum: hight friability grain and good tenacity. For stainless steel cutting. - C - Slicon carbide: for fragile materiales (stone, marble and granite) and soft materials (aluminium, brass).
A
B
PROFESSIONAL RANGE
Diamond Disc General Purpose. Laser. Professional 50708 REF.
€
50708-300 142,98 50708-350 185,54
051896 051919
1 1
Diamond Disc General Purpose. Laser. Professional 50713
A mm
B mm
C mm
D mm
Nº
REF.
300 350
25,4 25,4
10 10
2,8 3,2
20 24
50713-300 50713-350
€
86,96 106,49
405712 314236
1 1
A mm
B mm
C mm
D mm
Nº
300 350
25,4 25,4
10 10
2,8 3
21 25
50300 50310
A
B
50320
Abrasive Cutting Disc INOX - METAL Extrathin 50300 - 50310 - 50320 REF.
Diamond Disc Hard Materials. Laser. Professional 50724 REF.
50724-300 50724-350
€
117,96 168,79
223491 223569
1 1
014785 014808 014822 014839 139617 139679
25 25 25 25 25 25
25 30 36 47 100 170
A mm B mm
115 125 115 125 180 230
22,2 22,2 22,2 22,2 22,2 22,2
€
B mm
C mm
D mm
Nº
REF.
300 350
25,4 25,4
10 10
2,8 3,2
18 21
50732-180 57,69 373479 87,12 373486 50732-230 50732-300 143,24 373493 50732-350 186,54 373516
1 1 1 1
MBox
A mm
B mm
C mm
D mm
4 4
180 230 300 350
25,4 25,4 25,4 25,4
7 7 7 7
1,6 1,6 2 2,2
1 1 1,6 1,6 1,6 1,9
AS 60 INOX - BF AS 60 INOX - BF AS 46 INOX - BF AS 46 INOX - BF AS 46 INOX - BF AS 46 INOX - BF
50330-115 50330-125 50330-180 50330-230
€
1,43 1,53 1,96 2,86
g
373806 374001 374179 374292
25 25 25 25
37 47 100 170
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
2,5 2,5 2,5 2,5
A 24 R - BF A 24 R - BF A 24 R - BF A 24 R - BF
Porcelain tile, commonly called porcelain, is a ceramic material that, unlike other ceramics, absorbs very little water, which makes it harder.
Abrasive Cutting Disc INOX - METAL 50301 REF.
50301-115 50301-125 50301-150 50301-180 50301-230
156
Abrasive Cutting Disc INOX - METAL Thin 50330 REF.
Diamond Disc Porcelain. Continuous Rim. Professional 50732
A mm
Among these materials are granite, klinker, quartzite, porphyry, cured concrete, etc.
1,34 1,47 1,43 1,61 2,55 2,73
g
CUTTING AND GRINDING
50300-115 50300-125 50310-115 50310-125 50320-180 50320-230
€
€
1,43 1,53 1,86 1,96 2,86
g
600711 600728 302721 600735 600742
25 25 25 25 25
68 80 115 165 282
Abrasive Cutting Disc METAL Stationary Machine 50431 - 50441 - 50321
A mm B mm
115 125 150 180 230
22,2 22,2 22,2 22,2 22,2
REF.
3 3 3 3 3
A 24 R - BF A 24 R - BF A 24 R - BF A 24 R - BF A 24 R - BF
50431-300 50441-300 50321-350
€
7,59 7,59 12,15
g
940961 25 941005 25 600926 25
555 555 800
A mm B mm
300 22,2 3,5 300 25,4 3,5 350 25,4 3,5
AS 24 S - BF AS 24 S - BF AS 24 S - BF
157
ABRASIVE DISCS FOR CUTTING AND GRINDING / PROFESSIONAL RANGE
A
B
Abrasive Cutting Disc STONE Extrathin 50322 €
REF.
50322-115
1,57
g
606768 25
30
115
22,2
REF.
1
Abrasive Cutting Disc STONE 50482
Abrasive Cutting Disc STONE 50302
A mm B mm
C 60 T - BF
50302-115 50302-125 50302-230
€
1,56 1,67 3,20
600759 25 600766 25 600780 25
g
A mm B mm
58 68 230
115 22,2 125 22,2 230 22,2
€
REF.
3 3 3
C 24 R - BF C 24 R -BF C 24 R - BF
50482-115 50482-230
0,78 1,82
447118 25 447163 25
g
A mm B mm
58 230
115 22,2 230 22,2
3 3
C 24 R - BF C 24 R - BF
STRIP DISCS
Strip discs Abrasive Grinding Disc INOX - METAL / Hard 50351 €
REF.
50351-115 50351-125 50351-180 50351-230
2,03 2,30 3,93 5,28
g
124422 124552 124828 124958
10 10 10 10
170 205 405 640
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
Abrasive Grinding Disc INOX - METAL / Soft 50361 REF.
7 7 7 7
A 30 T - BF A 30 T - BF A 30 T - BF A 30 T - BF
7
C 30 S - BF
50361-115 50361-125 50361-180 50361-230
€
2,03 2,30 3,93 5,28
g
125221 125337 125429 125535
10 10 10 10
170 205 405 640
Uses: • For surface finishing, maintenance work, finishing tasks repair of farming tools, welding and settings. • Three types of grain: - A: universal, Ideal for steel, iron, wood. - AZ: Heavy duty tasks, high removal capacity, ideal for stainless steel and forgery. - SIC: stone, glass, plastic – non-ferrous materials. • Two size of grain: - 40-60: average grain for rough surface finishes. - 80-120: fine grain for fine surface finishes.
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
7 7 7 7
AS 30 Q - BF AS 30 Q - BF AS 30 Q - BF AS 30 Q - BF
Abrasive Grinding Disc STONE 50352 €
REF.
50352-115
2,26
g
124576
10
150
A mm B mm
115
22,2
MAXIPLUS RANGE POLYAMIDE BASE
Abrasive Cutting Disc INOX - METAL Thin 50420 50420-115 50420-230
1,84 3,71
g
388923 25 389265 25
60 245
Abrasive Cutting Disc INOX - METAL 50421
A mm B mm
REF.
115 22,2 2,5 230 22,2 2,5
AS 30 S - BF AS 30 S - BF
50421-115 50421-125 50421-180 50421-230
€
1,84 1,97 2,56 3,71
g
924596 924633 924671 924718
25 25 25 25
68 80 165 282
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
3 3 3 3
AS 30 S - BF AS 30 S - BF AS 30 S - BF AS 30 S - BF
CUTTING AND GRINDING
€
REF.
• Adapted flat base for flat surface finishes. • Does not stain or scratch the worked surface. • Improved disc use as the nylon base can be worn during the work. • Cotton support fabrics that offer a very good finishing sensation and avoid burn marks on the material, making the discs to be very adequate for working with stainless steel. • Longer useful life: +15% higher filling capacity than fibreglass based discs.
DYNAMIC RANGE
Strip Disc Grinding METAL. Grain A 50501 Abrasive Cutting Disc INOX - METAL ExtraThin 50400 REF.
50400-115 50400-125
158
€
0,86 0,94
g
556506 25 586848 25
25 35
A mm B mm
115 125
22,2 22,2
Abrasive Cutting Disc INOX - METAL 50480 REF.
1 1
AS 60 INOX - BF AS 60 INOX - BF
REF.
50480-115 50480-125 50480-180 50480-230
€
0,78 0,86 1,61 1,80
g
446999 512656 512564 447057
25 25 25 25
68 80 165 282
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
3 3 3 3
A 24 R - BF A 24 R - BF A 24 R - BF A 24 R - BF
50501-40 50501-60 50501-80 50501-120
€
7,13 7,13 7,13 7,13
601152 601169 601176 601220
10 10 10 10
Strip Disc Grinding INOX - METAL. Grain AZ 50502
g
A mm
B mm
112 108 101 92
115 115 115 115
22,2 22,2 22,2 22,2
REF.
A 40 A 60 A 80 A 120
For grinding work in steel sheets and cleaning of various surfaces (rust, paint).
50502-40 50502-60 50502-80 50502-120
€
7,96 7,96 7,96 7,96
601190 601206 601213 601237
10 10 10 10
g
A mm
B mm
112 108 101 92
115 115 115 115
22,2 22,2 22,2 22,2
AZ 40 AZ 60 AZ 80 AZ 120
For demanding grinding work in stainless steel and cas iron.
159
BRUSHES
STRIP DISCS / POLYAMIDE BASE
Brushes • High-quality materials for excellent performance. • Wire high wear resistance. • Optimum material and wires combination to ensure required finishing accuracy.
A
Uses: • For brushing, cleaning jobs, removing paint, varnish, flakes, rust and small burr. • Four wire materials: - Stainless steel: for non cotamination cleaning, rust stains, soot on stainless steel, aluminium or special alloys. - Brass coated steel:for working on copper, plastic, plumb, aluminium, glass ans steel. - Brass: for non-ferrous steel and spark-free tasks. - Nylon: for difficult to reach areas. Coarse grain (Red) rough finishing. Fine grain (Blue) fine finishing. • Three wire types: - Braided wires: for maximum performance in heavy-duty tasks and tasks requiring speed and firmness. - Corrugated wire: for continuous brushing tasks and slight burrs removal. Fine finishing. - Straigt wire: for any type of brushing. Medium finishing.
B
Strip Disc Grinding STONE. Grain SIC 50503 €
REF.
50503-40 50503-60 50503-80 50503-120
7,69 7,69 7,69 7,69
601244 601251 601268 601275
10 10 10 10
g
A mm
B mm
112 108 101 92
115 115 115 115
22,2 22,2 22,2 22,2
SIC 40 SIC 60 SIC 80 SIC 120
FIBREGLASS BASE • Slanted base for edge finishing works. • Does not stain or scratch the worked surface. • Polyester support fabrics that provide great performance.
HANDHELD BRUSHES • For general light brushing jobs. A B Brush Brass Coated Steel Straight Wire 50801 REF.
50801-3 50801-4 50801-5
€
1,15 1,34 1,72
372380 372427 372465
1 1 1
Brush Stainless Steel Straight Wire 50802
g
A mm
B mm
H
REF.
112 140 170
295 295 295
25 25 25
3 4 5
50802-3 50802-4 50802-5
Brass coated steel. ø 0.3 straight wire. REF.
50511-40 50511-60 50511-80 50511-120 50551-40 50551-60 50551-80 50611-40 50611-60 50611-80
€
4,98 4,98 4,98 4,98 5,65 5,65 5,65 9,79 9,79 9,79
941302 941333 941364 941395 300154 300314 300390 941661 941692 941722
10 10 10 10 10 10 10 10 10 10
g
A mm
B mm
90 80 75 70 90 90 80 225 220 200
115 115 115 115 125 125 125 180 180 180
22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2
1 1 1
g
A mm
B mm
H
112 140 170
295 295 295
25 25 25
3 4 5
Stainless steel. ø 0.3 straight wire.
Strip Disc Grinding INOX - METAL. Grain AZ 50512 - 50552 - 50612 REF.
A 40 A 60 A 80 A 120 A 40 A 60 A 80 A 40 A 60 A 80
372502 372540 372588
50512-40 50512-60 50512-80 50512-120 50552-40 50552-60 50552-80 50612-40 50612-60 50612-80
€
5,65 5,65 5,65 5,65 6,28 6,28 6,28 9,89 9,89 9,89
941425 941456 941487 941517 300659 300789 300857 941784 941814 941845
10 10 10 10 10 10 10 10 10 10
g
A mm
B mm
90 80 75 70 110 110 90 225 220 200
115 115 115 115 125 125 125 180 180 180
22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2
AZ 40 AZ 60 AZ 80 AZ 120 AZ 40 AZ 60 AZ 80 AZ 40 AZ 60 AZ 80
Brush Brass Corrugated Wire 50803 REF.
50803-3 50803-4 50803-5
€
2,45 3,27 4,38
372625 372663 372700
1 1 1
Brush without Handle Brass Coated Steel Straight Wire 50804 g
A mm
B mm
H
REF.
112 140 170
295 295 295
25 25 25
3 4 5
50804-5
Brass. ø 0.3 corrugated wire.
50806-A
€
1,57
372823
372748
1
g
A mm
B mm
H
190
210
35
5
Brass coated steel. ø 0.3 straight wire. Without handle, for heavy duty works.
Narrow Brush Brass Coated Steel Straight Wire 50806-A REF.
€
2,03
24
Narrow Brush Stainless Steel Corrugated Wire 50806-I
g
A mm
B mm
H
REF.
38
265
30
1
50806-I
Brass coated steel. ø 0.3 straight wire. Very narrow, to reach difficult places.
€
4,78
372861
24
g
A mm
B mm
H
38
265
30
1
Stainless steel. ø 0.3 corrugated wire. Very narrow, to reach difficult places.
Strip Disc Grinding STONE. Grain SIC 50513 REF.
50513-40 50513-60 50513-80 50513-120
€
5,45 5,45 5,45 5,45
941548 941579 941609 941630
10 10 10 10
g
A mm
B mm
80 75 70 65
115 115 115 115
22,2 22,2 22,2 22,2
SIC 40 SIC 60 SIC 80 SIC 120
Narrow Brush Brass Corrugated Wire 50806-L REF.
50806-L
€
4,54
372908
24
g
A mm
B mm
H
38
265
25
1
Brass. ø 0.3 corrugated wire. Very narrow, to reach difficult places.
160
161
CUTTING AND GRINDING
Strip Disc Grinding METAL. Grain A 50511- 50551 - 50611
€
4,14 5,01 5,98
BRUSHES / HANDHELD BRUSHES
CIRCULAR INDUSTRIAL BRUSHES • For working with grinders on fix benches.
Spark Plug Cleaner Brass Coated Steel Corrugated Wire 50805-A €
REF.
50805 A
3,24
633696
24
Spark Plug Cleaner Brass Corrugated Wire 50805-L
g
A mm
B mm
H
REF.
20
133
15
3
50805 L
0,15mm Brass Coated Steel Corrugated Wire.
€
3,03
633832
24
g
A mm
B mm
H
20
133
15
3
0,15mm Brass Corrugated Wire.
Wheel Brush Brass Coated Steel Corrugated Wire 50810 €
REF.
DIY BRUSHES • To use normal drills up to a maximum of 4,500 rpm. • Cleaning and removing paints, varnishes, rust, small burr from practically any material and relatively easy jobs. • 6 mm bolt. A
50810-10016 50810-10020 50810-12518 50810-15018 50810-15025 50810-20020 50810-20025
8,69 12,21 9,38 11,75 16,42 15,60 22,00
g
373387 373424 373462 373547 373585 373707 373745
1 1 1 1 1 1 1
A mm B mm
H
V
100 100 125 150 150 200 200
5 6 5 5 7 5 7
8.000 8.000 8.000 6.000 6.000 4.500 4.500
205 229 283 450 550 790 920
16 20 18 18 25 20 25
Wheel Brush Stainless Steel Corrugated Wire 50810 I REF.
50810-15025 I
€
g
27,26 633795
A mm
12 550 150
B mm
H
V
25
7
6.000
B
Wheel Brush Brass Coated Steel Corrugated Wire 50807 REF.
50807-50 50807-60 50807-75 50807-100
€
1,33 1,33 1,72 2,56
g
373066 373103 373141 373189
24 24 24 12
33 42 70 105
A mm
50 60 75 100
B mm
12 13 16 24
V
4.500 4.500 4.500 4.500
Cup Brush Brass Coated Steel Corrugated Wire 50808 REF.
50808-50 50808-75 50808-80
€
1,72 2,59 3,09
g
373226 373264 936193
24 24 12
63 120 196
A mm
50 75 80
B mm
18 25 23
V
4.500 4.500 4.500
Wheel Brush Hardened Steel Braided Wire 50811 €
REF.
50811-100 50811-115 50811-150 50811-175
15,26 15,60 18,90 21,37
g
373783 373936 374124 374162
A mm B mm
H
V
100 115 150 175
1 1 1 1
12.500 12.500 9.000 9.000
239 272 500 686
1 1 1 1
20 23 37 42
INDUSTRIAL CUP BRUSHES • For working on large metal surfaces using angle grinders and mini grinders in areas difficult toreach.
50808-50 I
€
6,17
633733
24
End Brush Brass Coated Steel Corrugated Wire 50809-25
g
A mm
B mm
V
70
50
15
4.500
REF.
50809-25
€
2,43
373301
24
g
A mm
B mm
V
55
25
30
4.500
Cup Brush Brass Coated Steel Corrugated Wire 50812 REF.
50812-80 50812-100 50812-125
DIY Brushes Display 50850 REF.
50850 50807-50 - 6 50808-50 - 6
162
904031
12,03 14,75 21,66
374209 374247 374285
1 1 1
Cup Brush Stainless Steel Corrugated Wire 50812 I
g
A mm
B mm
V
230 399 620
80 100 125
30 30 35
8.500 8.500 6.500
REF.
50812-80 I
€
23,61
g
633771
12
230
A mm
80
B mm
V
22
8.500
Cup Brush Hardened Steel Braided Wire 50813
€
73,54
€
1
50807-75 - 6 50808-75 - 6
g
A mm
B mm
C mm
REF.
3.500
230
380
400
50813-80 50813-100 50813-120
50807-100 - 6 50809-25 - 6
€
17,17 18,26 23,03
374322 374360 374407
1 1 1
g
A mm
B mm
V
685 875 1.065
80 100 120
22 22 22
8.500 8.500 6.500
163
CUTTING AND GRINDING
Cup Brush Stainless Steel Corrugated Wire 50808- 50 I REF.
BRUSHES / INDUSTRIAL CUP BRUSHES
ENCAPSULATED INDUSTRIAL BRUSHES • With 6 mm bolt to fit into drills. • Resin covered to provide: - Better performance and accuracy: the wire does not bend. - Maximum safety, the wire does not break off.
B A Cup Brush Brass Coated Steel Corrugated Wire 50814 €
REF.
50814-75
11,69
374445
1
Cup Brush Brass Coated Steel Corrugated Wire 50814
g
A mm
B mm
V
215
75
30
12.500
To use in mini- grinders.
REF.
50814-65
€
10,94
374483
1
g
A mm
B mm
V
280
65
20
12.500
To use in mini- grinders.
Encapsulated Wheel Brush Brass Coated Steel Corrugated Wire 50822 €
REF.
50822-75
CONICAL INDUSTRIAL BRUSHES
12,79
375084
24
g
A mm
B mm
V
96
75
30
15.000
Encapsulated End Brush Brass Coated Steel Corrugated Wire 50824 REF.
50824-30
€
12,79
375169
24
g
A mm
B mm
V
96
31
25
15.000
• For use with mini grinders.
INDUSTRIAL NYLON BRUSHES
REF.
50815-1001 50815-1002
€
g
12,03 374520 22,46 374568
A mm B mm
12 181 100 12 274 100
20 20
H
V
1 2
12.500 12.500
Conic Brush Brass Coated Steel Corrugated Wire 50816 REF.
50816-1001 50816-1002
€
25,23 374605 38,02 374643
g
A mm B mm
12 181 100 12 274 100
20 20
H
V
1 2
12.500 12.500
Nylon Wheel Brush 50825 Conic Brush Brass Coated Steel Corrugated Wire 50817 REF.
50817-1001 50817-1151
€
g
12,67 374681 14,75 374728
A mm B mm
12 215 100 12 405 115
20 20
H
V
1 2
12.500 12.500
Conic Brush Brass Coated Steel Corrugated Wire 50817- I REF.
50817-1001 I
€
27,73 633818
g
12 215
A mm B mm
100
20
H
V
1
12.500
REF.
50825-75B 50825-75F 50825-100B 50825-100F
Nylon Cup Brush 50826-75F
€
5,12 5,36 6,21 6,46
375244 375602 375329 375282
24 24 12 12
g
A mm
B mm
V
75 75 120 120
75 75 100 100
16 16 23 23
4.500 4.500 4.500 4.500
g
A mm
B mm
V
67 67
25 25
25 25
4.500 4.500
Nylon End Brush 50827-25B REF.
End Brush Stainless Steel Corrugated Wire 50818-I REF.
50818-25 I
164
€
7,20
g
633757 24
50
A mm B mm
25
30
V
18.000
50827-25B 50827-25F
375565 375527
50826-50B 50826-50F 50826-75B 50826-75F
€
5,01 5,12 5,36 5,53
375404 375367 375480 375442
g
A mm
B mm
24 24 24 24
73 73 130 130
50 50 75 75
18 18 25 25
V
g
A mm
B mm
V
12 12
80 120
100 100
25 25
3.500 3.500
4.500 4.500 4.500 4.500
Nylon Flap Brush 50829
€
4,09 4,27
REF.
24 24
REF.
50829-100B 50829-100F
€
6,62 6,62
961034 961072
165
CUTTING AND GRINDING
Conic Brush Brass Coated Steel Corrugated Wire 50815
• Manufactured with highly flexible nylon filaments preventing the breakage with carbon silicate abrasive grains. • Two types of grain: - Thick red, 80 grain. - Thin blue, 180 grain. • With 6 mm bolt to fit into standard drills.