CUTTING AND GRINDING
DIAMOND
HARD MATERIALS
Diamond discs
Hard materials are considered to be those with extreme values of hardness and average abrasion. Among these materials are granite, klinker, quartzite, porphyry, refractory brick, cured concrete, etc.
Benefits: • Maximum performance and service life of the disc. • Excellent cutting speed and capacity. • Large selection: discs for dry or wet cutting continuous, turbo or segmented. Features: • Top quality, large, octagonal shaped diamonds. • The diamonds are homogenous so that they are all of the same quality right around the rim of the disc. • Laser marking that prevents information from being lost or the disc blade slowing down or becoming blunt. Use: • Dry cut discs to use in air cooled portable machines and wet cut discs to use in stationary water cooled machines.
B A
Hard materials. Segmenting. Professional 7 €
REF.
50704-115 50704-125 50704-180 50704-230
DRY CUTTING
34,76 37,65 60,24 75,46
MBox A mm
051612 051636 051650 051674
REF.
22,2 22,2 22,2 22,2
50705-115 50705-125 50705-180 50705-230
115 125 180 230
4 4 4 4
1 1 1 1
Hard materials. Turbo. Professional 7
B mm C mm D mm Nº
7 7 7 7
2,1 9 2,2 10 2,4 12 2,4 16
€
29,21 33,84 52,05 79,73
051698 051711 051735 051759
1 1 1 1
MBox
A mm
B mm
C mm
D mm
4 4 4 4
115 125 180 230
22,2 22,2 22,2 22,2
7 7 7 7
2,1 2,1 2,6 2,8
ABRASIVE MATERIALS
Dry cutting discs are intended, both because of their diameters and their composition, to be used on portable machines where cooling is caused by air. Discs are chosen in function of the desired finish, the material to be cut, and the user’s preferences.
Abrasive materials are considered to be those that are not very hard, but which wear out discs quickly because of their highly abrasive capacity. Among these materials are green concrete, aerated concrete blocks, old concrete, silica terrazzo, asphalt, normal brick, sandstone, etc.
GENERAL PURPOSE General construction materials are considered to be those that are commonly used and do not have extreme values of hardness or abrasion. Among these materials are roof tiles, concrete roof tiles, terrazzo, bricks, concrete blocks, hydraulic tiles, etc.
50702-115 28,70 051452 50702-125 30,69 051476 50702-180 48,54 051490 50702-230 56,83 051513
1 1 1 1
4 4 4 4
115 125 180 230
22,2 25,4 25,4
50707-230 90,42 051834 50707-300 147,30 051858 50707-350 165,56 051872
7 7 7
2,6 16 2,8 18 3,2 21
REF.
22,2 22,2 22,2 22,2
50703-115 50703-125 50703-180 50703-230
7 7 7 7
2,1 2,2 2,4 2,6
8 9 13 15
General purpose. Segmenting. Pro 7 50711-115 50711-125 50711-180 50711-230
152
€
15,67 23,11 32,98 35,92
MBox A mm
405453 405484 405514 405545
1 1 1 1
4 4 4 4
115 125 180 230
1 1 1
MBox
A mm
B mm
C mm
D mm
4
230 300 350
22,2 25,4 25,4
7 7 7
2,5 3 3
General purpose. Turbo. Professional 7
B mm C mm D mm Nº
€
23,16 24,84 38,11 58,01
051537 051551 051575 051599
1 1 1 1
MBox
A mm
B mm
C mm
D mm
4 4 4 4
115 125 180 230
22,2 22,2 22,2 22,2
7 7 7 7
2,1 2,1 2,6 2,8
Ceramics. Continuous strip, Professional 7 REF.
50722-115 50722-125
€
16,65 19,04
222838 222890
1 1
Porcelain tiles. Continuous strip, Professional 7
MBox
A mm
B mm
C mm
D mm
4 4
115 125
22,2 22,2
7 7
1,5 1,5
Within ceramic materials are tiles, Catalan tile, fired clay, etc. for use on floors and walls, both interior and exterior.
REF.
€
REF.
230 300 350
4
1 1 1
Abrasive materials. Turbo. Professional 7
B mm C mm D mm Nº
REF.
50734-115 50734-125
€
24,07 27,43
525670 525700
1 1
MBox
A mm
B mm
C mm
D mm
4 4
115 125
22,2 22,2
7 7
1,6 1,6
Porcelain tile, is a ceramic material that, unlike other ceramics, absorbs very little water, which makes it harder.
General purpose. Turbo. Pro7 B mm C mm D mm Nº
REF.
22,2 22,2 22,2 22,2
50712-115 50712-125 50712-180 50712-230
7 7 7 7
2,2 8 2,2 10 2,4 14 2,4 16
€
15,27 17,25 28,49 39,03
405576 405613 405644 405675
1 1 1 1
MBox
A mm
B mm
C mm
D mm
4 4 4 4
115 125 180 230
22,2 22,2 22,2 22,2
7 7 7 7
2 2 2,3 2,5
Reinforced concrete. Professional 10 REF.
50735-230
€
96,47
569308
1
MBox
A mm
B mm
C mm
D mm
4
230
22,2
10
2,6
It is a hard material because of the effect of the reinforcement, which conditions the composition of the binders of the disc
153
CUTTING AND GRINDING
MBox A mm
MBox A mm
OTHER MATERIALS
General purpose. Segmenting. Professional 7 €
€
50706-230 78,41 051773 50706-300 123,18 051797 50706-350 168,86 051810
B
A
REF.
Abrasive materials. Segmenting. Professional 7 REF.
ABRASIVE DISCS FOR CUTTING AND GRINDING
DIAMOND / WET CUTTING FOR DIAMOND GRINDING
Abrasive cutting and grinding discs Advantages: • Excellent performance and accuracy. • Multipurpose use (fine and thick profiles; stainless steel and metal materials). • Wide range. Features: • High-quality raw materials. • Homogeneity of the discs over time. • Different types of grain, thicknesses and diameters of discs. • Complies with the EN-12413 standard. • Three qualities: Maxiplus, Professional and Dynamic. Uses: • For cutting, and grinding with electric portable or stationary machinery.
WET CUTTING FOR DIAMOND GRINDING Wet cutting discs are intended, both because of their diameters and their composition, to be used for more intensive and continuous work, mainly with stationary machines, cooled with water.
GENERAL PURPOSE General construction materials are considered to be those that are commonly used and do not have extreme values of hardness or abrasion. Among these materials are roof tiles, concrete roof tiles, normal bricks, concrete blocks, hydraulic tiles, etc.
PROFESSIONAL RANGE B A
50300 50310
General purpose. Segmenting. Professional 10 REF.
50708-300 50708-350
€
138,96 180,32
051896 051919
1 1
B
50320
A
General purpose. Segmenting. Professional 7
A mm
B mm
C mm
D mm
Nº
REF.
300 350
25,4 25,4
10 10
2,8 3,2
20 24
50713-300 50713-350
€
84,51 103,49
405712 314236
1 1
A mm
B mm
C mm
D mm
Nº
300 350
25,4 25,4
10 10
2,8 3
21 25
Cutting disc STAINLESS STEEL-METAL / THIN REF.
50300-115 50300-125 50310-115 50310-125 50320-180 50320-230
€
1,31 1,43 1,39 1,57 2,48 2,66
g
014785 014808 014822 014839 139617 139679
25 25 25 25 25 25
25 30 36 47 100 170
Cutting disc STAINLESS STEEL-METAL
A mm B mm
115 125 115 125 180 230
22,2 22,2 22,2 22,2 22,2 22,2
REF.
1 1 1,6 1,6 1,6 1,9
AS 60 INOX - BF AS 60 INOX - BF AS 46 INOX - BF AS 46 INOX - BF AS 46 INOX - BF AS 46 INOX - BF
50330-115 50330-125 50330-180 50330-230
€
1,39 1,49 1,91 2,78
g
373806 374001 374179 374292
25 25 25 25
37 47 100 170
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
2,5 2,5 2,5 2,5
A 24 R - BF A 24 R - BF A 24 R - BF A 24 R - BF
300 22,2 3,5 300 25,4 3,5 350 25,4 3,5
AS 24 S - BF AS 24 S - BF AS 24 S - BF
Hard materials. Segmenting. Professional 10 REF.
50724-300 50724-350
€
114,64 164,04
223491 223569
1 1
A mm
B mm
C mm
D mm
Nº
300 350
25,4 25,4
10 10
2,8 3,2
18 21
Among these materials are granite, klinker, quartzite, porphyry, cured concrete, etc.
WET CUTTING FOR CERAMIC CUTTER
50301-115 50301-125 50301-150 50301-180 50301-230
€
1,39 1,49 1,81 1,91 2,78
g
600711 600728 302721 600735 600742
25 25 25 25 25
68 80 115 165 282
Cutting disc for stationary machine METAL
A mm B mm
115 125 150 180 230
22,2 22,2 22,2 22,2 22,2
REF.
3 3 3 3 3
A 24 R - BF A 24 R - BF A 24 R - BF A 24 R - BF A 24 R - BF
50431-300 50441-300 50321-350
€
7,38 7,38 11,81
g
940961 25 941005 25 600926 25
555 555 800
A mm B mm
Porcelain tiles. Continuous strip, Professional 7 REF.
€
50732-180 56,07 373479 50732-230 84,67 373486 50732-300 139,21 373493 50732-350 181,29 373516
1 1 1 1
MBox
A mm
B mm
C mm
D mm
4 4
180 230 300 350
25,4 25,4 25,4 25,4
7 7 7 7
1,6 1,6 2 2,2
Porcelain tile, commonly called porcelain, is a ceramic material that, unlike other ceramics, absorbs very little water, which makes it harder.
154
Cutting disc STONE / THIN REF.
50322-115
€
1,53
Cutting disc STONE g
606768 25
30
A mm B mm
115
22,2
REF.
1
C 60 T - BF
50302-115 50302-125 50302-230
€
1,52 1,63 3,11
600759 25 600766 25 600780 25
g
A mm B mm
58 68 230
115 22,2 125 22,2 230 22,2
3 3 3
C 24 R - BF C 24 R -BF C 24 R - BF
155
CUTTING AND GRINDING
Cutting disc STAINLESS STEEL-METAL REF.
STRIP DISCS
ABRASIVE DISCS FOR CUTTING AND GRINDING / PROFESSIONAL RANGE
Grinding disc STAINLESS STEEL-METAL / HARD €
REF.
50351-115 50351-125 50351-180 50351-230
1,98 2,24 3,82 5,14
g
124422 124552 124828 124958
10 10 10 10
170 205 405 640
10
150
22,2 22,2 22,2 22,2
Professional strip discs for surface finishing: maintenance work, finishing tasks repair of farming tools, welding, settings, etc. GRAIN: • A: universal, Ideal for steel, iron, wood. • AZ: demanding work, high removal capacity, ideal for stainless steel and forgery. • SIC: stone, glass, plastic – non-ferrous materials. SIZE OF GRAIN: • 40-60: average grain for rough surface finishes. • 80-120: fine grain for fine surface finishes.
Grinding disc STAINLESS STEEL-METAL / SOFT
A mm B mm
115 125 180 230
Strip discs
REF.
7 7 7 7
A 30 T - BF A 30 T - BF A 30 T - BF A 30 T - BF
7
C 30 S - BF
50361-115 50361-125 50361-180 50361-230
€
1,98 2,24 3,82 5,14
g
125221 125337 125429 125535
10 10 10 10
170 205 405 640
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
7 7 7 7
AS 30 Q - BF AS 30 Q - BF AS 30 Q - BF AS 30 Q - BF
Grinding disc STONE €
REF.
50352-115
2,20
g
124576
A mm B mm
115
22,2
POLYAMIDE BASE Features: • Adequate flat base for flat surface finishes. • Does not stain or scratch the worked surface. • Improved disc usage as the nylon base can be worn during the work. • Cotton support fabrics that offer a very good finishing sensation and avoid burn marks on the material, making the discs to be very adequate for working with stainless steel • Longer useful life: +15% more filing capacity that fibreglass based discs.
MAXIPLUS RANGE
Cutting disc STAINLESS STEEL-METAL €
REF.
50420-115 50420-230
1,79 3,61
g
388923 25 389265 25
60 245
Cutting disc STAINLESS STEEL-METAL
A mm B mm
REF.
115 22,2 2,5 230 22,2 2,5
AS 30 S - BF AS 30 S - BF
50421-115 50421-125 50421-180 50421-230
€
1,79 1,92 2,49 3,61
g
924596 924633 924671 924718
25 25 25 25
68 80 165 282
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
3 3 3 3
AS 30 S - BF AS 30 S - BF AS 30 S - BF AS 30 S - BF
METAL – CORUNDUM (A) REF.
DYNAMIC RANGE
50501-40 50501-60 50501-80 50501-120
STAINLESS STEEL-METAL / AGGRESSIVE – ZIRCONIUM (AZ)
€
6,93 6,93 6,93 6,93
601152 601169 601176 601220
10 10 10 10
g
A mm
B mm
112 108 101 92
115 115 115 115
22,2 22,2 22,2 22,2
REF.
A 40 A 60 A 80 A 120
For grinding work in steel sheets and cleaning of various surfaces (rust, paint).
50400-115 50400-125
€
0,84 0,92
g
556506 25 586848 25
25 35
22,2 22,2
REF.
1 1
601190 601206 601213 601237
10 10 10 10
g
A mm
B mm
112 108 101 92
115 115 115 115
22,2 22,2 22,2 22,2
AZ 40 AZ 60 AZ 80 AZ 120
For demanding grinding work in stainless steel and cas iron.
Cutting disc METAL
A mm B mm
115 125
€
7,74 7,74 7,74 7,74
AS 60 INOX - BF AS 60 INOX - BF
50480-115 50480-125 50480-180 50480-230
€
0,76 0,84 1,57 1,75
g
446999 512656 512564 447057
25 25 25 25
68 80 165 282
CUTTING AND GRINDING
Cutting disc STAINLESS STEEL-METAL / THIN REF.
50502-40 50502-60 50502-80 50502-120
A mm B mm
115 125 180 230
22,2 22,2 22,2 22,2
3 3 3 3
A 24 R - BF A 24 R - BF A 24 R - BF A 24 R - BF
STONE – SILICON CARBIDE (SIC) REF.
Cutting disc STONE REF.
50482-115 50482-230
156
€
0,76 1,77
447118 25 447163 25
g
A mm B mm
58 230
115 22,2 230 22,2
3 3
C 24 R - BF C 24 R - BF
50503-40 50503-60 50503-80 50503-120
€
7,48 7,48 7,48 7,48
601244 601251 601268 601275
10 10 10 10
g
A mm
B mm
112 108 101 92
115 115 115 115
22,2 22,2 22,2 22,2
SIC 40 SIC 60 SIC 80 SIC 120
For grinding work in stone, plastics and non ferrous materials.
157
BRUSHES
STRIP DISCS / FIBREGLASS BASE
Brushes
FIBREGLASS BASE
Advantages: • Excellent performance and accuracy for the job carried out. • Optimal finishes. • Comfortable brushing action. • Long-lasting tools. • Multipurpose. • Large range for different applications. Features: • High wear resistance. • High-quality raw materials. Uses: • For brushing, cleaning jobs, removing paint, varnish, flakes, rust and small burr.
Features: • Fibreglass slanted base for edge finishing works. • Does not stain the worked surface.
METAL – CORUNDUM (A)
STAINLESS STEEL-METAL / AGGRESSIVE – ZIRCONIUM (AZ)
€
REF.
4,84 4,84 4,84 4,84 5,50 5,50 5,50 9,52 9,52 9,52
50511-40 50511-60 50511-80 50511-120 50551-40 50551-60 50551-80 50611-40 50611-60 50611-80
941302 941333 941364 941395 300154 300314 300390 941661 941692 941722
10 10 10 10 10 10 10 10 10 10
g
A mm
B mm
90 80 75 70 90 90 80 225 220 200
115 115 115 115 125 125 125 180 180 180
22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2
€
REF.
A 40 A 60 A 80 A 120 A 40 A 60 A 80 A 40 A 60 A 80
For grinding work in steel sheets and cleaning of various surfaces (rust, paint).
5,50 5,50 5,50 5,50 6,11 6,11 6,11 9,62 9,62 9,62
50512-40 50512-60 50512-80 50512-120 50552-40 50552-60 50552-80 50612-40 50612-60 50612-80
941425 941456 941487 941517 300659 300789 300857 941784 941814 941845
10 10 10 10 10 10 10 10 10 10
g
A mm
B mm
90 80 75 70 110 110 90 225 220 200
115 115 115 115 125 125 125 180 180 180
22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2 22,2
V: Max. r.p.m.
AZ 40 AZ 60 AZ 80 AZ 120 AZ 40 AZ 60 AZ 80 AZ 40 AZ 60 AZ 80
H: Number of rows.
HANDHELD BRUSHES • For general light brushing jobs. • Stainless steel for stainless steel surfaces. • Brass wires for nonferrous metals and anti-spark jobs. • Without handle for tough jobs. • Plastic handle for difficult to access areas (slots, etc.).
For demanding grinding work in stainless steel and cas iron.
A B Brushes 50801 50801-3 50801-4 50801-5
STONE – SILICON CARBIDE (SIC) 5,30 5,30 5,30 5,30
50513-40 50513-60 50513-80 50513-120
941548 941579 941609 941630
10 10 10 10
g
A mm
B mm
80 75 70 65
115 115 115 115
22,2 22,2 22,2 22,2
1,12 1,31 1,68
372380 372427 372465
1 1 1
g
A mm
B mm
H
REF.
112 140 170
295 295 295
25 25 25
3 4 5
50802-3 50802-4 50802-5
Brass coated steel. ø 0.3 straight wire.
50803-3 50803-4 50803-5
EXHIBITOR
2,39 3,18 4,26
372625 372663 372700
1 1 1
g
A mm
B mm
H
REF.
112 140 170
295 295 295
25 25 25
3 4 5
50804-5
50806-A
395x265x135 mm
3 4 5
g
A mm
B mm
H
1
190
210
35
5
1,53
g
A mm
B mm
H
38
265
30
1
€
1,98
372748
372823
24
g
A mm
B mm
H
REF.
38
265
30
1
50806-I
€
4,65
372861
24
Stainless steel. ø 0.3 corrugated wire.
395x265x135 mm
Polyamide base discs stand
Fibreglass base discs exhibitor
158
H
25 25 25
Brushes 50806-I
€
Brass coated steel. ø 0.3 straight wire.
€
50954 50512-40 - 10 50513-80 - 10
Brushes 50806-L
€
REF.
1
50511-80 - 10 50513-40 - 10
B mm
295 295 295
Brass coated steel. ø 0.3 straight wire.
Brushes 50806-A REF.
50511-40 - 10 50512-80 - 10
A mm
112 140 170
Brushes 50804 €
Brass. ø 0.3 corrugated wire.
258,26 608595
g
1 1 1
Stainless steel. ø 0.3 straight wire.
Brushes 50803 REF.
REF.
372502 372540 372588
SIC 40 SIC 60 SIC 80 SIC 120
For grinding work in stone, plastics and non ferrous materials.
50953
€
4,03 4,87 5,82
183,53 608632
50501-40 - 5 550502-80 - 5
1
50501-80 - 5 50503-40 - 5
REF.
50502-40 - 5 50503-80 - 5
50806-L
€
4,42
372908
24
g
A mm
B mm
H
38
265
25
1
Brass. ø 0.3 corrugated wire.
159
CUTTING AND GRINDING
€
REF.
Brushes 50802 €
REF.
BRUSHES / HANDHELD BRUSHES
CIRCULAR INDUSTRIAL BRUSHES • Removing rust, paint and burr. • Braided wire recommended for jobs requiring increased brushing capacity. • Multi-axe adaptor. A
Spark plug cleaners 50805
Spark plug cleaners 50805
€
REF.
50805 A
3,15
633696
24
g
A mm
B mm
H
REF.
20
133
15
3
50805 L
50805 A: Wavy steel wire 0.15 mm diameter.
€
2,95
633832
24
g
A mm
B mm
H
20
133
15
3
B
50805 L: Stainless steel. Wavy wire 0.3 mm diameter.
Brushes 50810 €
REF.
DIY BRUSHES • General used brushes for normal drills up to a maximum of 4,500 rpm. • Cleaning and removing paints, varnishes, rust, small burr from practically any material and relatively easy jobs. • 6 mm bolt.
50810-10016 50810-10020 50810-12518 50810-15018 50810-15025 50810-20020 50810-20025
8,45 11,87 9,12 11,42 15,96 15,17 21,38
Brushes 50810 I g
373387 373424 373462 373547 373585 373707 373745
1 1 1 1 1 1 1
A mm B mm
H
V
100 100 125 150 150 200 200
5 6 5 5 7 5 7
8.000 8.000 8.000 6.000 6.000 4.500 4.500
205 229 283 450 550 790 920
16 20 18 18 25 20 25
Brass coated steel. ø 0.3 corrugated wire. Supplied with up to nine different axes.
A
€
REF.
50810-15025 I
g
26,50 633795
A mm
12 550 150
B mm
H
V
25
7
6.000
Stainless steel. Wavy wire 0.3 mm diameter.
B Circular brushes 50807 REF.
50807-50 50807-60 50807-75 50807-100
€
1,30 1,30 1,68 2,49
373066 373103 373141 373189
Brushes 50811
Cup brushes 50808 24 24 24 12
g
A mm
B mm
V
33 42 70 105
50 60 75 100
12 13 16 24
4.500 4.500 4.500 4.500
Brass coated steel. ø 0.3 corrugated wire.
REF.
50808-50 50808-75 50808-80
€
1,68 2,52 3,01
373226 373264 936193
24 24 12
g
A mm
B mm
V
63 120 196
50 75 80
18 25 23
4.500 4.500 4.500
€
REF.
50811-100 50811-115 50811-150 50811-175
14,83 15,17 18,37 20,77
g
373783 373936 374124 374162
A mm B mm
H
V
100 115 150 175
1 1 1 1
12.500 12.500 9.000 9.000
239 272 500 686
1 1 1 1
20 23 37 42
Toughened steel. ø 0.5 braided wire.
Brass coated steel. ø 0.3 corrugated wire.
INDUSTRIAL CUP BRUSHES • For working on large metal surfaces using angle grinders and mini grinders in areas which are difficult to access.
Cup Brush 50808I 50808-50 I
Drill brushes 50809
€
6,00
633733
24
g
A mm
B mm
V
70
50
15
4.500
Stainless steel. Wavy wire 0.3mm diameter
REF.
50809-25
€
2,37
373301
24
g
A mm
B mm
V
55
25
30
4.500
Brass coated steel. ø 0.3 corrugated wire.
Brushes 50812 50812-80 50812-100 50812-125
Brush 50812 I €
REF.
11,70 14,34 21,05
374209 374247 374285
1 1 1
g
A mm
B mm
V
230 399 620
80 100 125
30 30 35
8.500 8.500 6.500
Brass coated steel. ø 0.3 corrugated wire.
Brush stand 50850 REF.
50850 50807-50 - 6 50808-50 - 6
50812-80 I
€
22,95
g
633771
12
230
A mm
80
B mm
V
22
8.500
Stainless steel. Wavy wire 0.3 mm diameter.
Brushes 50813
€
71,47
REF.
904031
1
50807-75 - 6 50808-75 - 6
g
A mm
B mm
C mm
REF.
3.500
230
380
400
50813-80 50813-100 50813-120
50807-100 - 6 50809-25 - 6
€
16,69 17,75 22,39
374322 374360 374407
1 1 1
g
A mm
B mm
V
685 875 1.065
80 100 120
22 22 22
8.500 8.500 6.500
Toughened steel. ø 0.5 braided wire.
160
161
CUTTING AND GRINDING
REF.
BRUSHES / INDUSTRIAL CUP BRUSHES
INDUSTRIAL FAN BRUSHES • Nylon filaments with carbon silicate abrasive grains. • Thick grain 80 (red) and thin grain 180 (blue). Brushes 50814-65
Brushes 50814-75 €
REF.
50814-75
11,37
374445
1
g
A mm
B mm
V
215
75
30
12.500
Use with mini grinders. Brass coated steel. ø 0.3 corrugated wire.
€
REF.
50814-65
10,64
374483
1
g
A mm
B mm
V
280
65
20
12.500
Use with mini grinders. Toughened steel. ø 0.5 braided wire.
CONICAL INDUSTRIAL BRUSHES Brushes 50829
• For use with mini grinders.
€
REF.
50829-100B 50829-100F
Brushes 50815 50815-1001 50815-1002
g
11,70 374520 21,83 374568
A mm B mm
12 181 100 12 274 100
20 20
H
V
1 2
12.500 12.500
Brass coated steel. ø 0.3 corrugated wire.
€
REF.
50816-1001 50816-1002
961034 961072
12 12
g
A mm
B mm
V
80 120
100 100
25 25
3.500 3.500
INDUSTRIAL NYLON BRUSHES
Brushes 50816 €
REF.
6,44 6,44
g
24,52 374605 36,95 374643
A mm B mm
12 181 100 12 274 100
20 20
H
V
1 2
12.500 12.500
• Manufactured with highly flexible nylon filaments preventing the breakage with carbon silicate abrasive grains. • Two types of grain: - Thick red, 80 grain. - Thin blue, 180 grain. • With 6 mm bolt to fit into standard drills.
Stainless steel. ø 0.3 corrugated wire.
A
Brushes 50817
Brush 50817 I €
REF.
50817-1001 50817-1151
g
12,32 374681 14,34 374728
A mm B mm
12 215 100 12 405 115
20 20
H
V
1 2
12.500 12.500
Toughened steel. ø 0.5 braided wire.
€
REF.
50817-1001 I
g
26,95 633818
A mm B mm
100
12 215
20
H
V
1
12.500
Stainless steel. Braided wire 0.3 mm diameter.
B Circular brushes 50825 REF.
50825-75B 50825-75F 50825-100B 50825-100F
Brush 50818 I €
REF.
50818-25 I
7,00
g
633757 24
A mm B mm
25
50
V
30
Cup brushes 50826
€
4,98 5,21 6,04 6,28
375244 375602 375329 375282
24 24 12 12
g
A mm
B mm
V
75 75 120 120
75 75 100 100
16 16 23 23
4.500 4.500 4.500 4.500
g
A mm
B mm
V
67 67
25 25
25 25
4.500 4.500
REF.
50826-50B 50826-50F 50826-75B 50826-75F
€
4,87 4,98 5,21 5,38
375404 375367 375480 375442
g
A mm
B mm
24 24 24 24
73 73 130 130
50 50 75 75
18 18 25 25
4.500 4.500 4.500 4.500
V
g
A mm
B mm
C mm
1
1.125
230
380
400
18.000
CUTTING AND GRINDING
Stainless steel. Wavy wire 0.3 mm diameter.
ENCAPSULATED INDUSTRIAL BRUSHES • With 6 mm bolt to fit into drills. • Resin covered to provide: - Better performance and accuracy: the wire does not bend. - Maximum safety, the wire does not break off.
Drill brushes 50827 REF.
Brushes 50822 REF.
50822-75
Brushes 50824 €
12,43
375084
24
Brass coated steel. ø 0.3 corrugated wire.
162
50827-25B 50827-25F
g
A mm
B mm
V
96
75
30
15.000
REF.
50824-30
€
12,43
375169
24
g
A mm
B mm
V
96
31
25
15.000
Industrial brush Stand 50851
€
3,98 4,15
375565 375527
24 24
REF.
50851 50825-75F - 3 50825-100B - 3 50826-50F - 3 50827-25B - 3
€
171,72
213850
50825-75B - 3 50826-75F - 3 50826-50B - 3 50829-100F - 3
50825-100F - 3 50826-75B - 3 50827-25F - 3 50829-100B - 3
Brass coated steel. ø 0.3 corrugated wire.
163