Screwdrivers
03
Advantages: • Excellent performance and accurate clamping. • Life-size handles guaranteeing the full transfer of force applied from the handle to the tip. • Ergonomic handles. • Long-lasting tools. • Wide range. • Unequal tightening torque intensity. Features: • Heat treatment and fully tempered shaft guaranteeing a hardness of 59±1HRc (TRIMAX) and 57±1 HRc (ERGOMAX). • Different types of ergonomic and triple material handles. • Accurate shape. • High wear resistance. • Geometry of the socket to guaranteeing optimal connection preventing the shaft from turning in the handle. • Flathead, die cut, Phillips, Pozidriv and Torx heads. • Complies with standards: ISO 2380, ISO 8764, Camcar-Textron Standards. Uses: • For jobs involving tightening and removing screws.
TRIMAX Screwdrivers • Trilobular shape matching the natural movement of the hand allowing 120o rotation. • Chrome-Molybdenum-Vanadium steel shaft. • Matt chrome finish on the shaft and tip: maximum corrosion protection.
C
L A B
Flat headed screwdriver 66200 REF.
Die cut screwdriver 66210
€
66200-3x75 66200-3x100 66200-3.5x100 66200-4x100 66200-4x125 66200-5.5x125 66200-5.5x150 66200-6.5x150
148367 148169 148534 148695 148848 148893 148947 148992
6 6 6 6 6 6 6 6
g
A mm
B mm
C mm
L mm
REF.
31 32 35 38 41 77 83 98
75 100 100 100 125 125 150 150
3 3 3,5 4 4 5,5 5,5 6,5
0,5 0,5 0,6 0,8 0,8 1 1 1,2
160 185 185 185 210 210 250 260
66210-4x100 66210-5.5x100 66210-5.5x125 66210-6.5x125 66210-6.5x150 66210-8x175 66210-10x200 66210-12x250
ISO 2380
66220-PH0 66220-PH1 66220-PH2 66220-PH3 ISO 8764
114
149319 149364 149425 149470 149531 149647 149692 149753
6 6 6 6 6 6 6 6
g
A mm
B mm
C mm
L mm
38 70 74 86 91 142 175 225
100 100 125 125 150 175 200 250
4 5,5 5,5 6,5 6,5 8 10 12
0,8 1 1 1,2 1,2 1,2 1,6 2
185 200 225 235 260 295 320 370
ISO 2380
Philips screwdriver 66220 REF.
€
Pozidriv screwdriver 66230
€
149814 149869 149920 149982
6 6 6 6
g
A mm
B mm
L mm
REF.
31 70 86 153
75 100 125 150
3 4,5 6 8
160 200 235 270
66230-PZ0 66230-PZ1 66230-PZ2 66230-PZ3 ISO 8764
€
150261 150315 150391 150452
6 6 6 6
g
A mm
B mm
L mm
31 70 87 151
75 100 125 150
3 4,5 6 8
160 200 235 270
Torx screwdriver 66240 REF.
€
66240-T6 66240-T7 66240-T8 66240-T9 66240-T10 66240-T15 66240-T20 66240-T25 66240-T27 66240-T30 66240-T40
150568 150629 150674 150735 150780 150841 150896 150957 151015 151060 151121
6 6 6 6 6 6 6 6 6 6 6
g
A mm
B mm
L mm
30 30 30 31 31 39 39 74 110 121 128
85 85 85 85 85 85 85 100 100 110 120
3 3 3 3 3 3,5 4 4,5 5,5 6 7
145 145 145 145 165 165 185 200 215 225 250
INDUSTRIAL HAND TOOLS
Norma Camcar-Trextron
TRIMAX Kits and Stands REF.
66281 66291-ELEC 66292-MEC
€
057706 333060 153170
1 1 1
66281 REF.
66200-3X100 66200-4X125 66200-5,5X150 66210-4X100 66210-5,5X125 66210-6,5X150 66210-8X175 66220-PH0 66220-PH1 66220-PH2 66230-PZ1 66230-PZ2 66240-T10 66240-T20 66240-T25
g
A mm
B mm
C mm
11.355 470 535
600 165 165
500 312 312
280 42 42
66291-ELEC CONT.
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
REF.
66200-3x100 66200-4x125 66200-5.5x125 66220-PH0 66220-PH1 66220-PH2
TRIMAX screwdriver Stand TRIMAX screwdriver Kit TRIMAX screwdriver Kit
03
66292-MEC CONT.
1 1 1 1 1 1
REF.
66200-3x100 66200-4x125 66210-5.5x125 66210-6.5x150 66220-PH1 66220-PH2
CONT.
1 1 1 1 1 1
115
ERGOMAX Screwdrivers • Ergonomic handle: Fits perfectly into the palm of the hand. • Anti-slip elastomer enhancing the perfect transmission of force. • Chrome-Vanadium steel with chrome finish steel shaft. • Blue steel tip. Improved measurement accuracy.
C
L A B
Flat headed screwdriver 6270 REF.
Die cut screwdriver 6271
€
6270-3x75 6270-3x100 6270-4x125 6270-5.5x150 6270-6.5x150
169249 169515 169690 169799 169843
12 12 12 12 12
A mm
B mm
C mm
L mm
REF.
31 32 41 83 98
75 100 125 150 150
3 3 4 5,5 6,5
0,5 0,5 0,8 1 1,2
148 173 198 254 265
6271-4x100 6271-5.5X125 6271-6.5x150 6271-8x175
ISO 2380
169942 170047 170160 170276
12 12 12 12
g
A mm
B mm
C mm
L mm
38 74 91 142
100 125 150 175
4 5,5 6 8
0,8 1 1,2 1,6
173 215 265 300
ISO 2380
Phillips screwdriver 6272 REF.
€
g
Pozidriv screwdriver 6273
€
6272-PH0 6272-PH1 6272-PH2 6272-PH3
170382 170436 170498 170559
12 12 12 6
€
g
A mm
B mm
L mm
REF.
31 70 86 153
75 100 125 150
3 5 6 8
148 204 240 275
6273-PZ1 6273-PZ2
ISO 8764
170696 170771
12 12
g
A mm
B mm
L mm
70 87
100 125
5 6
204 240
ISO 8764
Kit REF.
6278-MEC6 6279-5 BL
€
171273 194692
1 1
g
A mm
B mm
C mm
594 315
355 365
185 185
36 34
6278-MEC6 REF.
6270-3x100 6270-4x125 6271-5.5x125 6271-6.5x150 6272-PH1 6272-PH2
116
ERGOMAX screwdriver Kits ERGOMAX screwdriver Kits
6279-5 BL CONT.
1 1 1 1 1 1
REF.
6270-3x100 6270-4x125 6271-5.5x125 6272-PH1 6272-PH2
CONT.
1 1 1 1 1
Precision screwdrivers
INDUSTRIAL HAND TOOLS
Advantages: • Excellent control and precision work with its head being separated from the handle. • Maximum tip durability and precision. • Ergonomic and anti-slip handle. • Attractive presentation with hanger. Features: • Handle head separated from the body for better support and ease of use. • Coloured ring for identification of the type of tip. • Bi-material handle: - Reinforced polymer: highly resistant to impacts. - Elastomer: maximum grip and comfort. • Rod: - CHROME MOLYBDENUM VANADIUM. - CNC machined, blued tips. Uses: • For precision mechanical and electronic tasks.
L A B
Flat headed screwdriver 6250
Pozidriv screwdriver 6250
€
REF.
6250-2.5x75 6250-3x100 6250-3x150
096965 579031 579062
6 6 6
g
A mm
B mm
L mm
REF.
20 20 25
75 100 150
2,5 3 3
168 193 243
6250-PZ0 6250-PZ1
g
A mm
B mm
L mm
20 20
60 80
3 4,5
153 173
Phillips screwdriver 6250 6250-PH0 6250-PH1
579154 579185
g
A mm
B mm
L mm
579093 579123
6 6
20 20
60 80
3 4,5
153 173
g
A mm
B mm
L mm
579215 579246 579277 579307
6 6 6 6
20 20 20 20
60 60 60 60
3 3 3 3
153 153 153 153
Torx screwdriver 6250
€
REF.
€
6 6
REF.
€
6250-T6 6250-T7 6250-T8 6250-T9
Set Features: • Practical set for small jobs: glasses, mobile phones, cameras, consoles, etc. • With a hanger and an attractive design line.
6250J REF.
Set REF.
6250J
€
601428
4
g
A mm
B mm
C mm
240
250
120
30
6250-1,5x60 6250-2,5x75 6250-PH00 6250-PH0 6250-T5 6250-T6
CONT.
1 1 1 1 1 1
117
03
Tips • Molybdenum-Vanadium chrome plated steel tip. • Hardness 58±2 HRc. • Sprayed and varnished to guarantee against oxidation. • Accurate shape. • For non-heat treated screws. • Unequal tightening torque intensity. • Packaging: - Ref. 6311 and 6313: - Bag: 100 items.
A
Phillips tip 6311 REF.
Pozidriv tip 6313 €
6311-PH2 6311-PH3
319620 319729
100 100
g
A mm
5 5
25 25
REF.
ISO 8764
319828 319873
g
A mm
100 100
5 5
25 25
g
A mm
B mm
C mm
230
50
50
29
g
A mm
B mm
C mm
74 132
45 50
14 14
65 107
ISO 8764
6300
66304
Adaptors and tip holders REF.
€
6313-PZ1 6313-PZ2
Magnetizer
€
6300 66304
502329 152586
1 6
g
A mm
REF.
30 115
58 230
6299
6300: box with 3 units.
€
800333
6
To magnetize and demagnetize screw drivers rods.
Kit REF.
6390-6 6390-10
6390-10 REF.
0.6x4.5 0.8x5.5 1.2x6.5 1.6x8 PH1 PH2 PH3 PZ1 PZ2 PZ3 6300
118
€
507379 507430
6 1
6390-6 CONT.
1 1 1 1 1 1 1 1 1 1 1
REF.
0.8x5.5 1.6x8 PH1 PH2 PZ1 PZ2 6300
CONT.
1 1 1 1 1 1 1
03
Spanners Advantages: • Total size and opening setting accuracy. • Long-lasting tools. • Optimal torque transmission. • Wide range. Features: • Chrome-Vanadium steel. • High wear resistance. • Polished heads. • High relief forged marking. • Sprayed nickel and chrome matt finish. • Torque strengths over 30% of the current standard. Uses: • For varied torque and adjustment of nuts and bolts.
INDUSTRIAL HAND TOOLS
Fixed, combined, elbow ring spanners • Wide openings. • Wide neck to withstand increased torque tensions. • Greater head thickness for improved nut clamping. • Tempered heat treatment, minimum hardness 44 HRc.
03
L
A
B
Fixed spanner 6400 REF.
6400-6x7 6400-8x9 6400-10x11 6400-12x13 6400-14x15 6400-16x17 6400-18x19 6400-20x22 6400-21x23 6400-24x26 6400-25x28 6400-27x29 6400-30x32 6400-32x36 6400-34x36 6400-36x41 6400-41x46 6400-46x50
Fixed spanners Sets
€
445558 445619 445671 445749 445800 445862 445930 445992 446081 446173 446210 801231 446296 446333 801316 446395 801354 801392
6 6 6 6 6 6 6 6 6 6 6 6 6 1 1 1 1 1
g
A mm
B mm
L mm
REF.
25 35 50 70 95 120 170 210 250 300 380 460 480 575 600 720 1.275 1.660
15,8 19,4 23 27,5 30,4 33,4 38,7 43,6 46,3 52,7 54,5 60 61,5 65,8 68 74,3 84,4 94,4
17,5 21 25,1 30 32,3 35,9 40,4 48,2 49,6 56,8 59,5 62 65,4 73,6 76 84,1 93,8 102
126 142 157 170 188 202 220 232 250 266 275 302 298 325 328 360 400 450
6490-8 6490-10 6490-12 6490-6 BS 6490-8 BS 6490-10 BS 6490-12 BS
€
g
781175 781212 781250 062519 018400 018325 018387
1 1 1 1 1 1 1
840 1.400 2.240 450 820 1.380 2.210
Set of 8 spanners Set of 10 spanners Set of 12 spanners Bag of 6 spanners Bag of 8 spanners Bag of 10 spanners Bag of 12 spanners
Two openings. DIN 3110.
6490-8 REF.
6400-6x7 6400-8x9 6400-10x11 6400-12x13 6400-14x15 6400-16x17 6400-18x19 6400-20x22
6490-10 CONT.
1 1 1 1 1 1 1 1
REF.
6400-6x7 6400-8x9 6400-10x11 6400-12x13 6400-14x15 6400-16x17 6400-18x19 6400-20x22 6400-21x23 6400-24x26
6490-12 CONT.
1 1 1 1 1 1 1 1 1 1
REF.
6400-6x7 6400-8x9 6400-10x11 6400-12x13 6400-14x15 6400-16x17 6400-18x19 6400-20x22 6400-21x23 6400-24x26 6400-25x28 6400-30x32
CONT.
1 1 1 1 1 1 1 1 1 1 1 1
119
Fixed, combined, elbow ring spanners
6490-6 BS REF.
6490-8 BS REF.
CONT.
6400-6x7 6400-8x9 6400-10x11 6400-12x13 6400-14x15 6400-16x17
1 1 1 1 1 1
6490-10 BS CONT.
6400-6x7 6400-8x9 6400-10x11 6400-12x13 6400-14x15 6400-16x17 6400-18x19 6400-20x22
1 1 1 1 1 1 1 1
REF.
6490-12 BS REF.
CONT.
6400-6x7 6400-8x9 6400-10x11 6400-12x13 6400-14x15 6400-16x17 6400-18x19 6400-20x22 6400-21x23 6400-24x26
1 1 1 1 1 1 1 1 1 1
CONT.
6400-6x7 6400-8x9 6400-10x11 6400-12x13 6400-14x15 6400-16x17 6400-18x19 6400-20x22 6400-21x23 6400-24x26 6400-25x28 6400-30x32
1 1 1 1 1 1 1 1 1 1 1 1
L
A
B
Combined spanner 6410 REF.
6410-6 6410-7 6410-8 6410-9 6410-10 6410-11 6410-12 6410-13 6410-14 6410-15 6410-16 6410-17 6410-18 6410-19 6410-20 6410-21 6410-22 6410-24 6410-27 6410-30 6410-32
Combined spanners Sets
€
446456 446524 446586 446647 446715 446777 446838 446890 446968 447026 447088 447187 447248 447316 447392 447446 447484 447583 447705 447910 447866
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
g
A mm
B mm
L mm
REF.
20 25 30 35 40 45 60 75 85 95 115 135 155 165 185 210 215 280 380 490 600
16 16,8 18,8 20,9 22,6 24 25,4 28,1 30,1 32,1 34,2 36 37,5 40,2 41,4 43,2 45,8 50 55 60,1 64
10,6 11,6 12,8 14,4 16 17,2 18,5 20,2 21,2 23 24,4 25 27,5 28,6 30,4 31,8 33 36 39,5 43,5 46,8
100 110 115 125 135 145 155 171 181 185 195 210 220 230 240 245 257 270 300 330 350
6491-8 6491-10 6491-12 6491-8 BS 6491-10 BS 6491-12 BS
€
g
781298 781335 781373 018547 018448 018509
1 1 1 1 1 1
850 1.010 1.170 830 980 1.150
Set of 8 spanners Set of 10 spanners Set of 12 spanners Bag of 8 spanners Bag of 10 spanners Bag of 12 spanners
DIN 3110
6491-8 REF.
6410-8 6410-10 6410-11 6410-13 6410-14 6410-17 6410-19 6410-22
120
6491-10 CONT.
1 1 1 1 1 1 1 1
REF.
6410-8 6410-10 6410-11 6410-12 6410-13 6410-14 6410-16 6410-17 6410-19 6410-22
6491-12 CONT.
1 1 1 1 1 1 1 1 1 1
REF.
6410-8 6410-9 6410-10 6410-11 6410-12 6410-13 6410-14 6410-15 6410-16 6410-17 6410-19 6410-22
CONT.
1 1 1 1 1 1 1 1 1 1 1 1
REF.
6491-10 BS CONT.
1 1 1 1 1 1 1 1
6410-8 6410-10 6410-11 6410-13 6410-14 6410-17 6410-19 6410-22
6420-6x7 6420-8x9 6420-10x11 6420-12x13 6420-14x15 6420-16x17 6420-18x19 6420-20x22 6420-21x23 6420-24x26 6420-25x28 6420-27x29 6420-30x32 6420-32x36 6420-36x41 6420-41x46 6420-46x50
REF.
1 1 1 1 1 1 1 1 1 1
CONT.
1 1 1 1 1 1 1 1 1 1 1 1
6410-8 6410-9 6410-10 6410-11 6410-12 6410-13 6410-14 6410-15 6410-16 6410-17 6410-19 6410-22
Spanner sets
€
447958 447996 448030 448078 448115 448153 448191 448238 448276 448382 448429 801477 448511 448559 448610 801590 801637
CONT.
6410-8 6410-10 6410-11 6410-12 6410-13 6410-14 6410-16 6410-17 6410-19 6410-22
Ended bend ring spanner 6420 REF.
6491-12 BS
REF.
6 6 6 6 6 6 6 6 6 6 6 6 6 1 1 1 1
g
A mm
B mm
L mm
REF.
55 70 90 115 150 190 235 315 350 450 500 670 680 905 1.190 1.600 1.500
10,5 13,2 16,8 19,5 22,2 24,8 28,2 30,9 32 36,7 37,8 40 43,2 47 53 61 69
11,4 14,5 17,9 20,6 23 26 29,2 31,8 33,8 40,9 42,3 42,5 46,5 53 61 69 75
175 185 198 215 228 246 268 292 315 328 342 370 370 400 440 485 535
6492-8 6492-8 BS 6492-10 BS 6492-12 BS
€
g
781410 018622 018561 018592
1 1 1 1
1.310 1.290 2.080 3.240
Set of 8 spanner Bag of 8 spanners Bag of 10 spanners Bag of 12 spanners
03
DIN 838
6492-8 REF.
6420-6x7 6420-8x9 6420-10x11 6420-12x13 6420-14x15 6420-16x17 6420-18x19 6420-20x22
6492-10 BS
6492-8 BS REF.
6420-6x7 6420-8x9 6420-10x11 6420-12x13 6420-14x15 6420-16x17 6420-18x19 6420-20x22
CONT.
1 1 1 1 1 1 1 1
INDUSTRIAL HAND TOOLS
6491-8 BS
REF.
6420-6x7 6420-8x9 6420-10x11 6420-12x13 6420-14x15 6420-16x17 6420-18x19 6420-20x22 6420-21x23 6420-24x26
CONT.
1 1 1 1 1 1 1 1
6492-12 BS CONT.
1 1 1 1 1 1 1 1 1 1
REF.
6420-6x7 6420-8x9 6420-10x11 6420-12x13 6420-14x15 6420-16x17 6420-18x19 6420-20x22 6420-21x23 6420-24x26 6420-25x28 6420-30x32
CONT.
1 1 1 1 1 1 1 1 1 1 1 1
121
Box spanners • Hexagonal body and openings, forged steel heads. • Through-bore in all sizes from 10x11. • Option for using with fixed or adjustable spanner. • Tempered heat treatment, minimum hardness 43 HRc.
L A
B
Box spanner 6440
Box spanners Sets
€
REF.
6440-6x7 6440-8x9 6440-10x11 6440-12x13 6440-14x15 6440-16x17 6440-18x19 6440-20x22 6440-21x23 6440-24x26 6440-25x28 6440-30x32
449266 449310 449358 449396 449433 449471 449518 449556 449594 449693 449730 449815
6 6 6 6 6 6 6 6 6 6 6 6
€
g
A mm
B mm
L mm
REF.
45 58 86 145 140 200 240 300 340 400 500 710
10 13 15 18 20 23 25 28 29 33 34 40
11 14 16 19 22 24 26 30 31 35 37 42
105 110 120 140 145 155 165 170 185 190 205 210
6494-6 BS 6494-8 BS 6494-10 BS 6494-12 BS
g
029741 029765 021035 148862
1 1 1 1
740 1.290 2.070 3.250
Bag of 6 spanners Bag of 8 spanners Bag of 10 spanners Bag of 12 spanners
DIN 837
6494-6 BS REF.
6494-8 BS CONT.
6440-6x7 6440-8x9 6440-10x11 6440-12x13 6440-14x15 6440-16x17
1 1 1 1 1 1
REF.
6494-10 BS CONT.
6440-6x7 6440-8x9 6440-10x11 6440-12x13 6440-14x15 6440-16x17 6440-18x19 6440-20x22
1 1 1 1 1 1 1 1
REF.
6494-12 BS CONT.
6440-6x7 6440-8x9 6440-10x11 6440-12x13 6440-14x15 6440-16x17 6440-18x19 6440-20x22 6440-21x23 6440-24x26
1 1 1 1 1 1 1 1 1 1
REF.
CONT.
1 1 1 1 1 1 1 1 1 1 1 1
6440-6x7 6440-8x9 6440-10x11 6440-12x13 6440-14x15 6440-16x17 6440-18x19 6440-20x22 6440-21x23 6440-24x26 6440-25x28 6440-30x32
Adjustable spanners • Thin openings and longer openings to access difficult places and to hold the nut better nut. • The slide does not stick out. Less space required to operate. • Perfectly straight. Fully adjustable. Smoothed and without play. • Double T cross-section handle: robust, strong and ergonomic. • UN 167063 Patent. • Tempered heat treatment, minimum hardness 44±2 HRc. L A
B
Adjustable spanner 6460 REF.
6460-6 6460-8 6460-10 6460-12 6460-15
Adjustable spanner 6464
€
451504 451542 451580 451627 451665
6 6 6 6 1
Spanners with central adjustment wheel. UNE 16-532.
122
g
A mm
B mm
L mm
REF.
153 254 447 713 1.305
20 25 30 36 45
19,3 24 28,9 36 46
153 204 254 305 381
6464-6 6464-8 6464-10 6464-12 6464-16
€
114430 114133 114317 114379 576245
6 6 6 6 1
Spanners with side adjustment wheel. UNE 16-532.
g
A mm
B mm
L mm
160 340 580 900 1.570
19 26 32 36 45
20 25 29 35 48
150 200 257 300 405
Allen Keys • Nickel plated finish, under relief sealing. • Chamfered facilitating the key to fit into the screw. • Hardness 50 ± 2 HRc. Allen keys 6450 €
6450-1.5 N 6450-2 N 6450-2.5 N 6450-3 N 6450-4 N 6450-5 N 6450-6 N 6450-7 N 6450-8 N 6450-9 N 6450-10 N 6450-12 N 6450-14 N
449853 449914 449952 449990 450033 450071 450118 450156 450194 450231 450279 450446 509120
12 12 12 12 12 12 12 12 12 12 12 1 1
g
A mm
B mm
1 1 2 4 10 18 30 43 60 81 105 171 263
14 16 18 20 24 28 32 34 36 38 40 45 56
45 50 56 63 70 79 90 95 100 105 112 125 140
A
B
INDUSTRIAL HAND TOOLS
REF.
Nickel plated Allen keys. ISO 2936.
Allen and Torx keys sets REF.
€
6455-P3 6455-8 6457-9 P 6458-9 N 6459-9 TIP
g
618815 618976 507218 507294 610284
6 6 6 6 6
490 170 420 260 270
Kit of 3 sets with Allen and Torx keys Set of 8 Allen keys Set of 9 Allen keys Set of 9 Allen keys Set of 9 Torx keys
03
6455-P3 REF.
CONT.
1,5 2 2,5 3 4 5 6 8
1 1 1 1 1 1 1 1
REF.
5/64” 3/32” 7/64” 1/8” 9/64” 5/32” 3/16” 7/32” 1/4”
CONT.
REF.
CONT.
1 1 1 1 1 1 1 1 1
T9 T10 T15 T20 T25 T27 T30 T40
1 1 1 1 1 1 1 1
6455-8 REF.
CONT.
1,5 2 2,5 3 4 5 6 8
1 1 1 1 1 1 1 1
6457-9 P REF.
1.5 P 2 P 2.5 P 3 P 4 P 5 P 6 P 8 P 10 P
6458-9 N CONT.
1 1 1 1 1 1 1 1 1
REF.
6450-1.5 N 6450-2 N 6450-2.5 N 6450-3 N 6450-4 N 6450-5 N 6450-6 N 6450-8 N 6450-10 N
6459-9 TIP CONT.
REF.
CONT.
1 1 1 1 1 1 1 1 1
T9 T10 T15 T20 T25 T27 T30 T40 T50
1 1 1 1 1 1 1 1 1
123
Stillson wrench • Blue steel finishing of use and contact areas. • Two versions, standard and monoblock manufactured in aluminium alloy. • Minimum tooth hardness of 55 HRc.
A L
B
Stillson wrench 6600
Stillson wrench 6601
€
REF.
6600-8 6600-10 6600-12 6600-14 6600-18 6600-24 6600-36
967326 967364 967401 967449 967487 967524 967562
6 6 6 6 1 1 1
g
A mm
B mm
L mm
REF.
280 590 790 1.040 1.820 3.080 5.690
27 34 42 49 60 76 102
17 22 25 27 30 38 48
200 250 310 350 450 600 900
6601-10 6601-14 6601-18 6601-24
UNE 16.552-92 USA: GGG-W-GSI type I, Class A.
€
318630 319088 319170 319262
6 6 1 1
g
A mm
B mm
L mm
400 1.100 1.500 2.550
34 47 60 76
22,5 27 30 38
250 350 450 600
Monoblock handle manufactured in aluminium alloy.
Socket spanners • Nickel plated and a matt chrome finish. • Fully tempered heat treatment, hardness 45±1 HRc.
L A
B
Socket 6520 1/2” REF.
Universal joint 6521 1/2”
€
6520-10 6520-11 6520-12 6520-13 6520-14 6520-15 6520-16 6520-17 6520-18 6520-19 6520-20 6520-21 6520-22 6520-23 6520-24 6520-25 6520-26 6520-27 6520-28 6520-30 6520-32 Hexagonal opening. DIN 3124.
453010 453058 453096 453133 453171 453218 453256 453294 453331 453379 453416 453454 453492 453539 453591 453638 453676 453713 453775 453867 453911
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
g
A mm
B mm
L mm
56 58 58 58 60 62 66 66 66 66 72 74 86 88 96 106 108 126 140 150 180
23 23 23 23 23 23 23 23 23 23 23 24 24 25 25 26 25 26 27 28 28
15 16 18 19 20 22 23 24 25 26 28 29 30 31 33 34 35 36 38 40 43
40 40 40 40 40 40 40 40 40 40 40 40 40 40 42 42 42 44 44 46 46
REF.
g
A mm
B mm
L mm
485110
1
135
24
12,6
74
g
A mm
B mm
L mm
485158 485196
1 1
180 345
23 23
14 14
125 250
g
A mm
B mm
L mm
1
375
13
24
292
g
A mm
B mm
L mm
1
610
42
39
270
DIN 3123
Extension 6523 1/2” REF.
€
6523-5 6523-10 DIN 3123
Sliding handle 6524 1/2” REF.
€
6524
485233
DIN 3123
Ratchet lever 6528 1/2” REF.
6528 DIN 3122
124
€
6521
€
485431
Extension 6543 3/4”
€
REF.
6540-22 6540-23 6540-24 6540-26 6540-27 6540-28 6540-30 6540-32 6540-36 6540-38 6540-41 6540-42 6540-46 6540-50
454871 454932 454963 454994 455038 455069 455090 455137 455168 455199 455236 455267 455298 455335
1 1 1 1 1 1 1 1 1 1 1 1 1 1
g
A mm
B mm
L mm
190 190 200 240 240 260 290 330 430 510 610 570 720 840
35 35 35 36 36 36 37 38 40 41 42 41 44 46
32 34 34 38 39 40 43 45 51 53 57 58 63 69
50 51 52 54 55 56 57 58 61 62 63 64 72 78
REF.
€
6543-8 6543-16
g
A mm
B mm
L mm
1 1
520 950
33 33
20 20
200 400
g
A mm
B mm
L mm
485639
1
1.150
18
32
500
g
A mm
B mm
L mm
485714
1
185
33
12,6
56
485554 485592
DIN 3123
Sliding handle 6544 3/4” REF.
€
6544 DIN 3123
Hexagonal opening. DIN 3124.
Reducer 6546 3/4” REF.
€
6546 Reductor 3/4’’-1/2’’. DIN 3123
03
Ratchet wheel 6549 3/4” REF.
6549
€
507492
1
g
A mm
B mm
L mm
2.600
64
60
510
DIN 3122
Socket spanners sets
Socket spanners sets REF.
€
6592-1/2 H1
780611
1
g
A mm
B mm
C mm
4.700
380
255
60
6592-1/2 H1 REF.
6520-8 6520-9 6520-10 6520-11 6520-12 6520-13 6520-14 6520-15 6520-16 6520-17 6520-18 6520-19 6520-21 6520-22
CONT.
1 1 1 1 1 1 1 1 1 1 1 1 1 1
REF.
6520-23 6520-24 6520-26 6520-27 6520-28 6520-29 6520-30 6520-32 6521 6523-5 6523-10 6524 6528
INDUSTRIAL HAND TOOLS
Socket 6540 3/4”
CONT.
1 1 1 1 1 1 1 1 1 1 1 1 1
125
03
Pliers and wire cutters Advantages: • Guaranteed cutting, holding and clamping. • Fast working. • Optimising clamping force and/or cutting capacity. • Ergonomic dual material handle. • Long-lasting tools. • Wide range. • Wire cutters: Lightweight handles and rigid cutting. Features: • Improved quality carbon steel. Oil tempered and induction treated edges. • High wear resistance. • Polished finish, nickel/chrome plated heads. • Quality rivets and joints. • Special handles design providing effectiveness and comfort. Maximum force transmission, improved clamping power and cutting capacity. • PVC and dual material handles (with two different areas). • Complies with the DIN/ISO 5746, DIN/ISO 5749, DIN/ISO 5745, DIN/ISO 5254, DIN/ISO 5256, DIN/ISO 8979 and DIN/ISO 8976 standards. Uses: • For holding, clamping, cutting, handling, wire stripping and wire cutting.
Universal pliers • Three different teeth areas. • Combining holding, clamping and cutting in one single tool. - Holding: smooth and refined teeth to hold without marking. - Clamping: thick teeth holding rounded parts and pipes. - Cutting: semi hard and hard materials to a diameter of 2.5 mm. • Temper and blue steel hardening of the head, minimum hardness 45 HRc. • Induction tempered edges, cutting hardness 60±2 HRc.
C
B A
L
Reinforced universal pliers 6100 PVC REF.
€
6100-160 PVC 6100-180 PVC 6100-200 PVC
442854 442892 442946
6 6 6
Reinforced universal pliers 6100 BIM
g
A mm
B mm
C mm
L mm
REF.
250 330 385
25 25,8 29
35 38 40
9 9,6 9,8
164 184 207
6100-160 BIM 6100-180 BIM 6100-200 BIM
PVC handle. DIN/ISO 5746.
6102-180 PVC
PVC handle. DIN/ISO 5746.
126
g
332797 332926 333022
A mm
B mm
C mm
L mm
35 38 40
9 9,6 9,8
164 184 207
A mm
B mm
C mm
L mm
25 28 27,6
36 37 42
9,7 10 10,4
165 186 207
6 6 6
190 25 230 25,8 290 29
g
6 6 6
210 265 325
Dual material handle. DIN/ISO 5746.
Universal pliers 6102 PVC REF.
€
Universal pliers 6102 BIM
€
442519
6
g
A mm
B mm
C mm
L mm
REF.
265
28
37
10
186
6102-160 BIM 6102-180 BIM 6102-200 BIM
€
Dual material handle. DIN/ISO 5746.
333121 333220 333329
Cutting pliers • Diagonal, reinforced diagonal and front. • Temper and blue steel hardening of the head, minimum hardness 45 HRc. • Induction tempered edges, cutting hardness 62 - 65 HRc.
Diagonal cutting pliers 6110 PVC
Diagonal cutting pliers 6110 BIM
€
g
6110-160 PVC 6110-180 PVC
443240 443288
6 6
A mm
B mm
C mm
L mm
REF.
20 20
10,6 10,3
165 185
6110-160 BIM 6110-180 BIM
225 21,8 280 23,4
PVC handle. DIN/ISO 5749.
€
g
6112-180 PVC 6112-200 PVC
6 6
A mm
B mm
C mm
L mm
20 20
10,6 10,3
165 185
B mm
C mm
L mm
21 21
10,9 10,7
189 205
220 21,8 280 23,4
443516 443554
6 6
Diagonal reinforced cutting pliers 6112 BIM
A mm
B mm
C mm
L mm
REF.
21 21
10,9 10,7
189 205
6112-180 BIM 6112-200 BIM
240 26,8 270 26,9
PVC handle. DIN/ISO 5749.
€
g
333725 333909
A mm
6 6
260 26,8 290 26,9
g
A mm
B mm
C mm
L mm
6
265
28,5
10,2
26
168
Dual material handle. DIN/ISO 5749.
Front cutting pliers 6114 PVC
Front cutting pliers 6114 BIM
€
REF.
g
333527 333626
Dual material handle. DIN/ISO 5749.
Diagonal reinforced cutting pliers 6112 PVC REF.
€
INDUSTRIAL HAND TOOLS
REF.
g
6114-160 PVC
443776
6
A mm
B mm
C mm
L mm
REF.
200 28,5
10,2
26
168
6114-160 BIM
PVC handle. DIN/ISO 5746.
€
333954
Dual material handle. DIN/ISO 5749.
Handling • Semi-rounded straight openings, semi-rounded curved openings, flat openings, rounded openings, long flat openings, long rounded openings, straight opening exterior clip, curved opening exterior clip, straight opening interior clip and curved opening interior clip. • Temper and blue steel hardening of the head, minimum hardness 45 HRc.
C
B
A
L
Handling pliers 6120 PVC REF.
6120-160 PVC 6120-200 PVC
Handling pliers 6120 BIM
€
g
444025 444063
6 6
A mm B mm C mm D mm L mm
140 16,7 180 17,5
Semi-rounded straight openings. PVC handle. DIN/ISO 5745.
52 76
8,5 8,5
2,5 164 1,7 203
REF.
6120-160 BIM 6120-200 BIM
€
g
334050 334159
6 6
A mm B mm C mm D mm L mm
145 16,7 190 17,5
52 76
8,5 8,5
2,5 164 1,7 203
Semi-rounded straight openings. Dual material handle. DIN/ISO 5745.
127
03
Handling pliers 6122 PVC REF.
Handling pliers 6122 BIM
€
6122-200 PVC
444261
6
g
A mm
B mm
C mm
L mm
REF.
180
17,5
71
2,5
199
6122-200 BIM
Semi-rounded curved openings. PVC handle. DIN/ISO 5745.
444384
6
g
A mm
B mm
C mm
L mm
190
17,5
71
2,5
199
Handling pliers 6130 BIM
€
6130-160 PVC
334258
Semi-rounded curved openings. Dual material handle. DIN/ISO 5745.
Handling pliers 6130 PVC REF.
€
6
g
A mm
B mm
C mm
L mm
REF.
160
15,8
33
9,2
160
6130-160 BIM
Flat openings. PVC handle. DIN/ISO 5745.
€
334357
6
g
A mm
B mm
C mm
L mm
175
15,8
33
9,2
160
Flat openings. Dual material handle. DIN/ISO 5745.
Handling pliers 6134 BIM REF.
€
6134-160 BIM
g
334456
A mm B mm C mm D mm L mm
165 15,5
6
34
9,7
3,2
167
Rounded openings. Dual material handle. DIN/ISO 5745.
Handling pliers 6142 PVC
Handling pliers 6140 PVC REF.
€
6140-10 6140-19
444698 444735
6 6
g
A mm
E mm
L mm
REF.
85 185
41,5 57
1,25 1,7
135 178
6142-10 6142-19
Handling pliers 6144 PVC 6144-19
6
Straight opening interior clips. PVC handle. DIN/ISO 5254
128
6 6
g
A mm
E mm
L mm
85 185
26 45
1,25 1,7
125 170
g
A mm
E mm
L mm
85 185 240
28 39 50
0,85 1,7 2,3
126 167 215
Handling pliers 6146 PVC
€
445022
444858 444896
Curved opening exterior clips. PVC handle. DIN/ISO 5254.
Straight opening exterior clips. PVC handle. DIN/ISO 5254.
REF.
€
g
A mm
E mm
L mm
REF.
185
52
1,7
182
6146-8 6146-19 6146-40
€
445114 462876 445190
6 6 3
Curved opening interior clips. PVC handle. DIN/ISO 5256.
Wire strippers • Temper and blue steel hardening of the head, minimum hardness 45 HRc.
Wire strippers 6150 PVC
Wire strippers 6150 BIM
€
6150-160 PVC
445237
6
g
A mm
B mm
C mm
L mm
REF.
150
20
39
9
164
6150-160 BIM
PVC handle. DIN/ISO 8979.
€
334555
6
g
A mm
B mm
C mm
L mm
165
20
39
9
164
Dual material handle. DIN/ISO 8979.
INDUSTRIAL HAND TOOLS
REF.
Multi-opening pliers
03
• Temper and blue steel hardening of the head, minimum hardness 45 HRc.
Multi-opening rack 6160 PVC
Multi-opening box 6162 PVC
€
REF.
g
6160-250 PVC
445367
6
350
A mm B mm C mm D mm L mm
34
48
9
43
252
PVC handle. DIN/ISO 8976.
REF.
€
g
6162-250 PVC
445442
6
A mm B mm C mm D mm L mm
290
34
g
A mm
B mm
L mm
6 6 6
31 70 86
85 100 110
3 4,5 6
145 180 210
37
8
33
245
PVC handle. DIN/ISO 8976.
Insulated tool
L A B
Screwdriver 66266
Screwdriver 66264 REF.
66264-2.5x75 66264-3x100 66264-3.5x100 66264-4x100 66264-5.5x125 66264-6.5x150
€
152647 152692 152746 152814 152869 152920
6 6 6 6 6 6
g
A mm
B mm
L mm
REF.
31 32 35 41 77 98
75 100 100 100 125 150
2,5 3 3,5 4 5,5 6,5
160 185 185 185 225 260
66266-PH0 66266-PH1 66266-PH2
Dual material screwdriver. Electrical flat headed. DIN EN 60900 VDE 0682 1000V.
€
152975 153033 153088
Dual material screwdriver. Phillips tip. DIN EN 60900 VDE 0682 1000V.
129
B A
L
Pliers 6102-180 VSE REF.
Pliers 6110-180 VSE
€
6102-180 VSE
124613
1
g
A mm
B mm
L mm
REF.
280
28
37
186
6110-180 VSE
Universal pliers. DIN EN 60900 VDE 0682 1000V.
125665 125733
1 1
g
A mm
B mm
L mm
REF.
265 320
32 34,5
10 10
168 200
6118-10 VSE 6118-16 VSE
Front cutting. DIN EN 60900 VDE 0682.
B mm
L mm
265
20
30
185
g
A mm
B mm
L mm
125863 125986
1 1
300 445
28 35
28 40
165 230
g
A mm
B mm
L mm
126525
1
190
22
71
199
g
A mm
B mm
L mm
126693
1
165
21
47
164
g
A mm
B mm
L mm
126921
1
420
34
46
250
Pliers 6122-200 VSE
€
6120-200 VSE
126464
1
g
A mm
B mm
L mm
REF.
200
22
74
204
6122-200 VSE
Semi-rounded straight openings. DIN EN 60900 VDE 0682.
Wire strippers. 6150-160 VSE
€
Rounded openings. DIN EN 60900 VDE 0682.
€
Semi-rounded curved openings. DIN EN 60900 VDE 0682
Pliers 6134-160 VSE 6134-160 VSE
€
Cutting electrical wires. DIN EN 60900 VDE 0682.
Pliers 6120-200 VSE
REF.
A mm
1
Pliers 6118 VSE €
6114-160 VSE 6114-200 VSE
REF.
g
125153
Diagonal cutting. DIN EN 60900 VDE 0682.
Pliers 6114 VSE REF.
€
126631
1
g
A mm
B mm
L mm
REF.
140
19
50
165
6150-160 VSE
€
Wire strippers. DIN EN 60900 VDE 0682.
Pliers 6162-250 VSE REF.
€
6162-250 VSE Multi-opening box. DIN EN 60900 VDE 0682.
130
Wire cutter • Off centre screw adjustment of blades. • High cutting capacity. • Safety stops. • Epoxy paint finish. • Head and screw replacement parts. • Elastomer handles to prevent them from slipping in the hand. • System of notches in the screw head preventing it from turning. • Induction tempered edges, cutting hardness 58 ± 1 HRc.
A
Wire cutter 6009 REF.
Head C 6009 €
6009-450 6009-600 6009-750 6009-900 6009-1050
159011 159028 159035 159042 159059
1 1 1 1 1
g
A mm
B mm
1.540 2.590 3.880 6.110 8.900
472 627 779 929 1.070
70 85 97 110 125
Handle screw T 6009 M REF.
C 6009-450 C 6009-600 C 6009-750 C 6009-900 C 6009-1050
158960 158977 158984 158991 159004
3 3 1 1 1
g
A mm
B mm
670 1.000 1.500 2.000 3.000
70 85 97 110 125
128 148 168 188 209
Head screw T 6009 C
€
g
T 6009-450 M T 6009-600 M T 6009-750 M T 6009-900 M T 6009-1050 M
€
REF.
179569 179576 179606 179620 179637
1 1 1 1 1
20 20 20 20 25
€
REF.
T 6009-450 C T 6009-600 C T 6009-750 C T 6009-900 C T 6009-1050 C
g
179477 179484 179514 179521 179538
1 1 1 1 1
20 20 20 20 25
Length Material to be cut
450 mm 19”
600 mm 24”
750 mm 30”
900 mm 36”
1.050 mm 24”
Soft wire 50 kgs/mm2
Ø 8 mm
Ø 10 mm
Ø 13 mm
Ø 16 mm
Ø 19 mm
Hard wire 133 kgs/mm2 HRC-41
Ø 6 mm
Ø 8 mm
Ø 9 mm
Ø 10 mm
Ø 11 mm
Extra hard wire 50 kgs/mm2 HRC-48
Ø 5,5 mm
Ø 7 mm
Ø 8 mm
Ø 9 mm
Ø 10 mm
131
INDUSTRIAL HAND TOOLS
B
03
Brushes
03
Advantages: • Excellent performance and accuracy for the job carried out. • Optimal finishes. • Comfortable brushing action. • Long-lasting tools. • Multipurpose. • Extensive range (diameters, types of wire, shape) for different applications. Features: • High wear resistance. • High-quality raw materials (ø 0.3 mm wire and nylon). • The right amount of wire or nylon. Uses: • For brushing, cleaning jobs, removing paint, varnish, flakes, rust and small burr. V: Max. r.p.m.
H: Number of rows.
Handheld brushes • For general light brushing jobs. • Stainless steel for stainless steel surfaces. • Brass wires for nonferrous metals and anti-spark jobs. • Without handle for tough jobs. • Plastic handle for difficult to access areas (slots, etc.). A
B
Brushes 50801 REF.
Brushes 50802 €
50801-3 50801-4 50801-5
372380 372427 372465
1 1 1
g
A mm
B mm
H
REF.
112 140 170
295 295 295
25 25 25
3 4 5
50802-3 50802-4 50802-5
Brass coated steel. ø 0.3 straight wire.
372625 372663 372700
1 1 1
g
A mm
B mm
H
REF.
112 140 170
295 295 295
25 25 25
3 4 5
50804-5
Brass. ø 0.3 corrugated wire.
A mm
B mm
H
112 140 170
295 295 295
25 25 25
3 4 5
g
A mm
B mm
H
1
190
210
35
5
€
372748
Brass coated steel. ø 0.3 straight wire.
Brushes 50806-A 50806-A
g
1 1 1
Brushes 50804 €
50803-3 50803-4 50803-5
REF.
372502 372540 372588
Stainless steel. ø 0.3 straight wire.
Brushes 50803 REF.
€
Brushes 50806-I €
372823
24
Brass coated steel. ø 0.3 straight wire.
g
A mm
B mm
H
REF.
38
265
30
1
50806-I
€
372861
24
g
A mm
B mm
H
38
265
30
1
g
A mm
B mm
H
38
265
25
1
Stainless steel. ø 0.3 corrugated wire.
Brushes 50806-L REF.
50806-L
€
372908
Brass. ø 0.3 corrugated wire.
132
24
DIY brushes • General used brushes for normal drills up to a maximum of 4,500 rpm. • Cleaning and removing paints, varnishes, rust, small burr from practically any material and relatively easy jobs. • 6 mm bolt.
A
B
Cup brushes 50808
€
REF.
50807-50 50807-60 50807-75 50807-100
373066 373103 373141 373189
24 24 24 12
g
A mm
B mm
V
33 42 70 105
50 60 75 100
12 13 16 24
4.500 4.500 4.500 4.500
Brass coated steel. ø 0.3 corrugated wire.
REF.
€
50808-50 50808-75 50808-80
373226 373264 936193
24 24 12
g
A mm
B mm
V
63 120 196
50 75 80
18 25 23
4.500 4.500 4.500
Brass coated steel. ø 0.3 corrugated wire.
50850 REF.
Drill brushes 50809
6 6 6 6 6 6
Brush stand 50850
€
REF.
50809-25
03
CONT.
50807-50 50807-75 50807-100 50808-50 50808-75 50809-25
373301
24
g
A mm
B mm
V
55
25
30
4.500
REF.
€
50850
904031
1
g
A mm
B mm
C mm
55
230
380
400
Brass coated steel. ø 0.3 corrugated wire.
Circular industrial brushes • Removing rust, paint and burr. • Braided wire recommended for jobs requiring increased brushing capacity. • Multi-axle adaptor. A
B
Brushes 50810 REF.
50810-10016 50810-10020 50810-12518 50810-12525 50810-15018 50810-15025 50810-17520 50810-17525 50810-20020 50810-20025
Brushes 50811 €
g
373387 373424 373462 373509 373547 373585 373622 373660 373707 373745
1 1 1 1 1 1 1 1 1 1
205 229 283 330 450 550 630 720 790 920
A mm B mm
100 100 125 125 150 150 175 175 200 200
16 20 18 25 18 25 20 25 20 25
H
V
5 6 5 7 5 7 5 7 5 7
8.000 8.000 8.000 8.000 6.000 6.000 6.000 6.000 4.500 4.500
Brass coated steel. ø 0.3 corrugated wire. Supplied with up to nine different axles.
REF.
50811-100 50811-115 50811-150 50811-175
€
g
373783 373936 374124 374162
1 1 1 1
239 272 500 686
A mm B mm
100 115 150 175
20 23 37 42
INDUSTRIAL HAND TOOLS
Circular brushes 50807
H
V
1 1 1 1
12.500 12.500 9.000 9.000
Toughened steel. ø 0.5 braided wire.
133
Industrial cup brushes • For working on large metal surfaces using angle grinders and mini grinders in areas which are difficult to access. • The braided wire removes the need for the ring providing more millimetres of wire.
Brushes 50812
Brushes 50813 €
REF.
50812-80 50812-100 50812-125
374209 374247 374285
1 1 1
g
A mm
B mm
V
230 399 620
80 100 125
30 30 35
8.500 8.500 6.500
Brass coated steel. ø 0.3 corrugated wire.
374322 374360 374407
g
A mm
B mm
V
1 1 1
685 875 1.065
80 100 120
22 22 22
8.500 8.500 6.500
g
A mm
B mm
V
1
280
65
20
12.500
Brushes 50814-65
€
50814-75
€
50813-80 50813-100 50813-120
Toughened steel. ø 0.5 braided wire.
Brushes 50814-75 REF.
REF.
374445
1
g
A mm
B mm
V
215
75
30
12.500
Use with mini grinders. Brass coated steel. ø 0.3 corrugated wire.
REF.
€
50814-65
374483
Use with mini grinders. Toughened steel. ø 0.5 braided wire.
Conical industrial brushes • For use with mini grinders.
Brushes 50815 REF.
50815-1001 50815-1002
Brushes 50816 €
g
A mm B mm
374520 12 181 100 374568 12 274 100
Brass coated steel. ø 0.3 corrugated wire.
20 20
H
V
1 2
12.500 12.500
REF.
€
50816-1001 50816-1002
g
A mm B mm
374605 12 181 100 374643 12 274 100
20 20
H
V
1 2
12.500 12.500
Stainless steel. ø 0.3 corrugated wire.
Brushes 50817 REF.
50817-1001 50817-1151
€
g
Toughened steel. ø 0.5 braided wire.
134
A mm B mm
374681 12 215 100 374728 12 405 115
20 20
H
V
1 2
12.500 12.500
Encapsulated industrial brushes • With 6 mm shaft to fit into drills. • Resin covered to provide: - Better performance and accuracy: the wire does not bend. • Maximum safety, the wire does not break off.
Brushes 50822
Brushes 50824 €
REF.
50822-75
375084
24
g
A mm
B mm
V
96
75
30
15.000
Brass coated steel. ø 0.3 corrugated wire.
REF.
€
50824-30
375169
24
g
A mm
B mm
V
96
31
25
15.000
Brass coated steel. ø 0.3 corrugated wire.
INDUSTRIAL HAND TOOLS
Industrial fan brushes • Recommended for cleaning of services which are difficult to access. • Nylon filaments with carbon silicate abrasive grains. • Thick grain 80 (red) and thin grain 180 (blue).
03 Brushes 50829 €
REF.
50829-100B 50829-100F
961034 961072
12 12
g
A mm
B mm
V
80 120
100 100
25 25
3.500 3.500
Industrial Nylon brushes • Manufactured with highly flexible nylon filaments preventing the breakage with carbon silicate abrasive grains. • Two types of grain: - Thick red, 80 grain. - Thin blue, 180 grain. • With 6 mm shaft to fit into standard drills. A
B
Circular brushes 50825 REF.
Cup brushes 50826
€
50825-75B 50825-75F 50825-100B 50825-100F
375244 375602 375329 375282
24 24 12 12
g
A mm
B mm
V
75 75 120 120
75 75 100 100
16 16 23 23
4.500 4.500 4.500 4.500
REF.
€
50826-50B 50826-50F 50826-75B 50826-75F
375404 375367 375480 375442
24 24 24 24
g
A mm
B mm
V
73 73 130 130
50 50 75 75
18 18 25 25
4.500 4.500 4.500 4.500
CONT
REF.
50851 REF.
50825-75F 50825-75B 50825-100F 50825-100B 50826-75F 50826-75B
Drill brushes 50827 REF.
50827-25B 50827-25F
3 3 3 3 3 3
CONT
50826-50F 50826-50B 50827-25F 50827-25B 50829-100F 50829-100B
3 3 3 3 3 3
Industrial brush Stand 50851
€
375565 375527
24 24
g
A mm
B mm
V
67 67
25 25
25 25
4.500 4.500
REF.
50851
€
213850
1
g
A mm
B mm
C mm
55
230
380
400
135
03
Files and rasps Advantages: • Fast working. • Long-lasting tools. • Wide range. Features: • Improved quality carbon steel. • Hardening treatment. • High hardness. • Wooden plastic and bimaterial handles (ergonomics). • High wear resistance. Uses: • For regrinding, filing, rasping and finishing jobs. M: Reference of the suitable handle for the file.
Mechanical files • Special chrome alloy forged steel. • Double treatment: globular hardening and complete tempering. • Perfectly straight. • Flat pointed, parallel flat, half rounded, rounded, triangular, square, flat thin, knife rasps. • Option to put a dual material handle.
A
B
Flat pointed 4001 REF.
4001-4 BAS. 4001-4 ENT. 4001-4 FIN. 4001-6 BAS. 4001-6 ENT. 4001-6 FIN. 4001-8 BAS. 4001-8 ENT. 4001-8 FIN. 4001-10 BAS. 4001-10 ENT. 4001-10 FIN. 4001-12 BAS. 4001-12 ENT. 4001-12 FIN. 4001-14 BAS. 4001-14 ENT. 4001-14 FIN.
136
Parallel flat 4002 g
€
400106 400304 400502 400700 400908 401301 401509 401707 402100 402308 402506 402704 402902 403107 403305 403503 403701 403909
A mm
B mm
M
12
25
100
7,9-11,2
4089-2 / 4090-2 / 4093-B4
12
70
150 10,5-15,1
4089-4 / 4090-3 / 4093-B3
12
150
200 13,3-19,2
4089-7 / 4090-4 4093-A4
12
271
250
16-24,4
4090-5 / 4093-A2
6
463
300
19-29
4090-6 / 4093-A2
6
720
350
22,5-34
4090-6 / 4093-A1
REF.
4002-4 BAS. 4002-4 ENT. 4002-4 FIN. 4002-6 BAS. 4002-6 ENT. 4002-6 FIN. 4002-8 BAS. 4002-8 ENT. 4002-8 FIN. 4002-10 BAS. 4002-10 ENT. 4002-10 FIN. 4002-12 BAS. 4002-12 ENT. 4002-12 FIN. 4002-14 BAS. 4002-14 ENT.
g
A mm
B mm
M
12
27
100
11,2
4089-2 / 4090-2 / 4093-B4
12
75
150
15,1
4089-4 / 4090-3 / 4093-B3
12
156
200
19,2
4089-7 / 4090-4 / 4093-A4
12
279
250
24,4
4090-5 / 4093-A2
6
476
300
29
4090-6 / 4093-A2
6
750
350
34
4090-6 / 4093-A1
€
404203 404401 404609 404807 405002 405200 405606 405804 406009 406207 406405 406603 406801 407006 407204 407402 407600
Half rounded 4003
Rounded 4004 g
€
4003-4 BAS. 4003-4 ENT. 4003-4 FIN. 4003-6 BAS. 4003-6 ENT. 4003-6 FIN. 4003-8 BAS. 4003-8 ENT. 4003-8 FIN. 4003-10 BAS. 4003-10 ENT. 4003-10 FIN. 4003-12 BAS. 4003-12 ENT. 4003-12 FIN. 4003-14 BAS. 4003-14 ENT.
408102 408300 408508 408706 408904 409307 409505 409703 410105 410303 410501 410709 410907 411102 411300 411508 411706
A mm
B mm
M
REF.
12
18
100
8,9-10,6
4089-2 / 4090-2 / 4093-B4
12
53
150
12,7-15
4089-4 / 4090-3 / 4093-B3
12
123
200 14,8-19,8
12
230
250
6
385
300 19,5-28,5 4090-6 / 4093-A2
6
586
350
19-24
23-33,2
4089-7 / 4090-4 / 4093-A4 4090-5 / 4093-A3
g
416800 417005 417203 418002 418200 418606 418903 419108 419405 419603 419801 420005 420203 420401 420609
A mm
B mm
M
REF.
12
22
100
5,5-8,5
4089-2 / 4090-1 / 4093-B4
12
77
150
8-12,5
4089-3 / 4090-3 / 4093-B3
12
160
200 10,5-15,6
4089-4 / 4090-4 / 4093-B2
12
285
250
4089-7 / 4090-5 / 4093-B1
6
450
11-17,8
300 12,5-20,6 4090-6 / 4093-B1
Flat thin 4007 REF.
4007-6 BAS. 4007-6 ENT. 4007-6 FIN.
A mm
B mm
M
12
10
100
2-3,8
4089-1 / 4090-1 / 4093-B5
12
29
150
3,5-5,8
4089-2 / 4090-2 / 4093-B4
12
73
200
5-7,5
4089-3 / 4090-3 / 4093-B4
12
143
250
6-9,4
4089-4 / 4090-4 / 4093-B3
6
278
300
7-11,4
4089-4 / 4090-4 / 4093-B3
03
Square 4006
€
4005-4 BAS. 4005-4 ENT. 4005-4 FIN. 4005-6 BAS. 4005-6 ENT. 4005-6 FIN. 4005-8 BAS. 4005-8 ENT. 4005-8 FIN. 4005-10 BAS. 4005-10 ENT. 4005-10 FIN. 4005-12 BAS. 4005-12 ENT. 4005-12 FIN.
412109 412307 412505 413304 413502 413908 414103 414301 414707 414905 415100 415308 415506 415704 415902
4090-6 / 4093-A1
Triangular 4005 REF.
g
€
4004-4 BAS. 4004-4 ENT. 4004-4 FIN. 4004-6 BAS. 4004-6 ENT. 4004-6 FIN. 4004-8 BAS. 4004-8 ENT. 4004-8 FIN. 4004-10 BAS. 4004-10 ENT. 4004-10 FIN. 4004-12 BAS. 4004-12 ENT. 4004-12 FIN.
INDUSTRIAL HAND TOOLS
REF.
g
€
4006-4 BAS. 4006-4 ENT. 4006-4 FIN. 4006-6 BAS. 4006-6 ENT. 4006-6 FIN. 4006-8 BAS. 4006-8 ENT. 4006-8 FIN. 4006-10 BAS. 4006-10 ENT. 4006-12 BAS. 4006-12 ENT. 4006-12 FIN.
422009 422207 422405 423204 423402 423600 423907 424102 424300 424508 424706 425109 425307 425505
A mm
B mm
M
12
13
100
1,6-3,8
4089-1 / 4090-1 / 4093-B5
12
39
150
2,9-5,4
4089-2 / 4090-2 / 4093-B4
12
91
200
4,5-7,1
4089-3 / 4090-3 / 4093-B4
12
180
250
5,6-9
4089-4 / 4090-4 / 4093-B3
6
313
300
6,6-11,6
4089-4 / 4090-4 / 4093-B2
Knife 4008 g
€
426908 427103 12 427301
30
A mm
150
B mm
1,8-15,6
M
REF.
4089-4 / 4090-3 / 4093-B3
g
A mm
B mm
M
4008-6 BAS. 4008-6 ENT. 4008-6 FIN.
429107 429305 12 429503
37
150
10-16,6
4089-4 / 4090-3 / 4093-B3
4008-8 ENT.
430004 12
73
200
12,5-21
4089-7 / 4090-4 / 4093-A4
4008-10 BAS. 4008-10 ENT.
430400 12 430608
122
250
15-26
4089-7 / 4090-5 / 4093-A3
€
Milling file 4061 for bodywork REF.
4061-14
€
469141
6
g
A mm
B mm
230
350
34
137
Sharpening files • Specially for sharpening all types of agricultural tools: machetes, hoes,... • Extra thin, thin, normal, rounded and triangular files.
Extra thin 4040 REF.
Thin 4041 g
€
A mm
B mm
4040-5
431605 12
19
125
3,5-6,1
4040-6
431803 12
27
150
4-6,9
M
4089-1 / 4090-2 / 4093-B5 4089-2 / 4090-3 / 4093-B4
Normal 4042 REF.
REF.
g
€
A mm
4041-4
432305 12
12
100
4041-4,5
432503 12
17
115
4041-5
432701 12
26
125
4041-6
432909 12
48
150
4041-7
433104 12
66
175
4041-8
433302 12
103
200
B mm
M
4089-1 / 4090-1 / 3,1-5,5 4093-B5 4089-1 / 4090-1 / 4-6,2 4093-B5 4089-2 / 4090-2 / 4-7 4093-B5 4089-2 / 4090-3 / 5,1-9,1 4093-B3 4089-3 / 4090-4 / 5,9-10,4 4093-B3 4089-3 / 4090-4 / 6,7-12,2 4093-B2
Rounded 4050 for power saws g
€
A mm
4042-3 V
433609 12
11
75
4042-4 V
434002 12
23
100
4042-5 V
434606 12
50
125
4042-6 V
435009 12
77
150
4042-7 V
435405 12
114
175
4042-8 V
435801 12
158
200
4042-9 V
436204 12
222
225
4042-10 V
436501 12
291
250
B mm
M
4089-1 / 4090-1 / 3,5-6,1 4093-B5 4089-2 / 4090-1 / 5,5-7,9 4093-B4 4089-3 / 4090-2 / 6,5-10,4 4093-B3 4089-3 / 4090-3 / 9-11,3 4093-B3 4089-3 / 4090-4 / 9-13,1 4093-B3 4089-4 / 4090-4 / 10-15 4093-B2 4089-4 / 4090-5 / 10-16,5 4093-B2 4089-7 / 4090-5 / 11-17,3 4093-B1
REF.
€
g
A mm
B mm
4050-8x4,0
442601
12
28
200
3,98
4050-8x4,0 BS
612059
6
28
200
3,98
4050-8x4,5
469363
12
31
200
4,5
4050-8x4,5 BS
612073
6
31
200
4,5
4050-8x4,8
442502
12
33
200
4,76
4050-8x4,8 BS
612097
6
33
200
4,76
4050-8x5,5
442700
12
36
200
5,55
4050-8x5,5 BS
612110
6
36
200
5,55
g
A mm
B mm
467000 467154 467208
12 12 6
120 190 417
150 200 250
20 25 29
BS: bag with two files.
Flat with handle 4082
Triangular 4081 REF.
g
€
A mm
4081-4
466508 12
23
100
4081-5
466607 12
60
125
4081-6
466706 12
77
150
4081-7
466805 12
115
175
4081-8
466904 12
160
200
4081-10
469233 12
260
250
B mm
M
4089-2 / 4090-1 / 5,5-8,2 4093-B4 4089-3 / 4090-2 / 6,5-10,6 4093-B3 4089-4 / 4090-3 / 9-11,5 4093-B3 4089-4 / 4090-4 / 9-13,3 4093-B3 4089-4 / 4090-4 / 10-15,2 4093-B2 4089-7 / 4090-5 / 11-17 4093-B1
REF.
€
4082-6 4082-8 4082-10
For sharpening hoes and machetes. Note: orders have a minimum quantity requirement.
Triangular parallel 4087 REF.
4087-6
g
€
7702956019893 12
77
ABmm mmB mm
11
150
M
4089-4 / 4090-3/ 11 4093-B3
For sharpening machetes. Note: orders have a minimum quantity requirement.
138
Needle files • For use by watchmakers, jewellery makers, engravers. • Flat pointed, rounded, half rounded, triangular, flat parallel files.
Flat pointed 4071 REF.
Rounded 4072 €
4071-16 BAS. 4071-16 ENT. 4071-16 FIN.
12 12 12
€
A mm
B mm
REF.
8 8 8
160 160 160
5,96 5,96 5,96
4072-16 BAS. 4072-16 ENT. 4072-16 FIN.
g
A mm
B mm
g
A mm
B mm
445305 445701 445909
12 12 12
9 9 9
160 160 160
2,92 2,92 2,92
g
A mm
B mm
447903 448306 448504
12 12 12
9 9 9
160 160 160
3,5 3,5 3,5
INDUSTRIAL HAND TOOLS
444506 444902 445107
g
Half rounded 4074 REF.
Triangular 4075
€
4074-16 BAS. 4074-16 ENT. 4074-16 FIN.
446906 447309 447507
12 12 12
9 9 9
160 160 160
5,5 5,5 5,5
g
A mm
B mm
448702 449105 449303
12 12 12
9 9 9
160 160 160
6 6 6
€
REF.
4075-16 BAS. 4075-16 ENT. 4075-16 FIN.
Parallel flat 4076 REF.
€
4076-16 BAS. 4076-16 ENT. 4076-16 FIN.
Needle file Kits REF.
4077-16 4078-16
€
466201 466300
1 1
g
A mm
B mm
C mm
150 60
170 190
45 120
20 7
4077-16 REF.
4071-16 BAS 4071-16 FIN 4072-16 BAS 4072-16 FIN 4073-16 BAS 4073-16 FIN 4074-16 BAS 4074-16 FIN 4075-16 BAS 4075-16 FIN 4076-16 BAS 4076-16 FIN
Box of assorted 12 fine and medium files Bag of assorted 6 needle files
4078-16 CONT.
1 1 1 1 1 1 1 1 1 1 1 1
REF.
4071-16 BAS 4072-16 BAS 4073-16 BAS 4074-16 BAS 4075-16 BAS 4076-16 BAS
CONT.
1 1 1 1 1 1
139
03
Carpenter’s rasps • For work in wooden joinery. • Half rounded carpentry, half rounded woodworking, flat pointed and rounded.
Half rounded carpentry rasp 4101 REF.
g
€
4101-6 BAS. 4101-6 ENT. 4101-6 FIN. 4101-8 BAS. 4101-8 ENT. 4101-8 FIN. 4101-10 BAS. 4101-10 ENT. 4101-10 FIN. 4101-12 BAS. 4101-12 ENT. 4101-12 FIN.
453805 454000 12 454208 454406 454604 12 454802 455007 455205 12 455403 455601 455809 6 456004
59
Half rounded woodworking rasp 4102 A mm
B mm
M
4089-4 / 4090-3 / 4093-B3
15
150
REF.
119
200
19,5
4089-4 / 4090-4 / 4093-A4
229
250
24
4089-7 / 4090-5 / 4093-A3
375
300
28,5
g
A mm
B mm
M
20
4089-7 / 4090-4 / 4093-A4
456400 12
4102-8 BAS. 4102-8 ENT. 4102-10 BAS. 4102-10 ENT.
457001 12 457209 457803 12 458008
B mm
59
150
19
121
200
24
210
250
29
g
A mm
B mm
M
4089-4 / 4090-3 / 4093-B3 4089-4 / 4090-4 / 4093-A4 4089-7 / 4090-5 / 4093-A3
Rounded 4104
€
4103-8 ENT.
4102-6 ENT.
A mm
4090-6 / 4093-A2
Flat pointed 4103 REF.
g
€
459708 12
154
200
REF.
€
4104-6 BAS. 4104-6 ENT.
461008 12 461206
29
150
6
4104-8 ENT.
462005 12
71
200
8
4104-10 BAS. 4104-10 ENT.
462609 12 462807
143
250
10
M
4089-2 / 4090-2 / 4093-B4 4089-3 / 4090-3 / 4093-B4 4089-4 / 4090-5 / 4093-B3
Horseshoeing line • Especially recommended for shoeing horses. • Maximum accuracy and a perfect finish guaranteed. • Blacksmith file with 1/2 shaft rapid finish, fine finish, 2-handed and two sided rasping.
Rasp 4132 REF.
Rasp 4135 g
€
4132-14 SHDA 4132-14 SHR
186673 014181
6 6
ABmm mmB mm
622 354 11 622 354
44 44
M
REF.
4090-7/4090-7NG 4090-7/4090-7NG
SHDA: Standard sharp. SHR: special re-sharpening.
ABmm mmB mm
655579199183
6 624 425 11
708944122252
6
44
M
4090-7/4090-7NG
For finishing.
Rasp 4131 REF.
g
€
4135-14 FINISH
Rasp 4134 g
€
4131-34 RAZOR
708944122146
6
A mm B mm
618 427
44
M
REF.
4090-7/4090-7NG
Extreme cut. Coarse file side.
g
€
4134-14 RAPTOR
mmB mm ABmm
827 427
59
M
4090-7/4090-7NG
Extra width: greater cutting surface. Coarse file side. A B
C
Rasp 4133 REF.
Hammer 8027 €
4133-14 4133-16 4133-18 1/2 file. Two-handed.
140
464924 464931 750372009449
B mm g
A mm
B mm
6 11 593 678 6 736 6
356 406 457
44 44 44
REF.
B mm g A mm B mm C mm
€
8027
Horseshoeing hammer.
144604
6
11 170
305
111
15,5
Files with dual material handle
REF.
Parallel flat 4002 MB g
A mm
B mm
M
63
100
7,9-11,2
6
63
100
7,9-11,2
6
125
150 10,5-15,1
6
125
150 10,5-15,1
6
125
150 10,5-15,1
6
220
200 13,3-19,2
6
220
200 13,3-19,2
6
220
200 13,3-19,2
6
353
250
16-24,4
6
353
250
16-24,4
6
353
250
16-24,4
4093-B4 4093-B4 4093-B3 4093-B3 4093-B3 4093-A4 4093-A4 4093-A4 4093-A2 4093-A2 4093-A2
€
4001-4 BAS. MB 4001-4 ENT. MB 4001-6 BAS. MB 4001-6 ENT. MB 4001-6 FIN. MB 4001-8 BAS. MB 4001-8 ENT. MB 4001-8 FIN. MB 4001-10 BAS.MB 4001-10 ENT. MB 4001-10 FIN. MB
097818 093650 093865 093759 098051 098242 098549 098679 131666 099171 099294
6
REF.
A mm
B mm
M
67
g
100
11,2
6
67
100
11,2
6
130
150
15,1
6
130
150
15,1
6
130
150
15,1
6
223
200
19,2
6
223
200
19,2
6
223
200
19,2
6
392
250
24,4
6
392
250
24,4
6
392
250
24,4
4093-B4 4093-B4 4093-B3 4093-B3 4093-B3 4093-A4 4093-A4 4093-A4 4093-A2 4093-A2 4093-A2
€
4002-4 BAS. MB 4002-4 ENT. MB 4002-6 BAS. MB 4002-6 ENT. MB 4002-6 FIN. MB 4002-8 BAS. MB 4002-8 ENT. MB 4002-8 FIN. MB 4002-10 BAS.MB 4002-10 ENT. MB 4002-10 FIN. MB
109986 110043 111064 120585 131741 131819 131871 131932 109900 109962 132045
6
INDUSTRIAL HAND TOOLS
Flat pointed 4001 MB
03
Half rounded 4003 MB REF.
Rounded 4004 MB g
A mm
B mm
M
6
57
100
8,9-10,6
6
57
100
8,9-10,6
6
57
100
8,9-10,6
6
103
150
12,7-15
6
103
150
12,7-15
6
103
150
12,7-15
6
173
200 14,8-19,8
6
173
200 14,8-19,8
6
173
200 14,8-19,8
6
283
250
19-24
6
283
250
19-24
6
283
250
19-24
4093-B4 4093-B4 4093-B4 4093-B3 4093-B3 4093-B3 4093-A4 4093-A4 4093-A4 4093-A3 4093-A3 4093-A3
g
A mm
B mm
M
6
60
100
5,5-8,5
6
127
150
8-12,5
6
127
150
8-12,5
6
127
150
8-12,5
6
225
200 10,5-15,6
6
225
200 10,5-15,6
6
225
200 10,5-15,6
6
357
250
11-17,8
6
357
250
11-17,8
6
357
250
11-17,8
4093-B4 4093-B3 4093-B3 4093-B3 4093-B2 4093-B2 4093-B2 4093-B1 4093-B1 4093-B1
€
4003-4 BAS. MB 4003-4 ENT. MB 4003-4 FIN. MB 4003-6 BAS. MB 4003-6 ENT. MB 4003-6 FIN. MB 4003-8 BAS. MB 4003-8 ENT. MB 4003-8 FIN. MB 4003-10 BAS.MB 4003-10 ENT. MB 4003-10 FIN. MB
132465 132526 132588 132656 132724 132786 132847 132915 132977 133042 133110 133172
Triangular 4005 MB REF.
4005-4 ENT. MB 4005-6 BAS. MB 4005-6 ENT. MB 4005-6 FIN. MB 4005-8 BAS. MB 4005-8 ENT. MB 4005-8 FIN. MB 4005-10 BAS.MB 4005-10 ENT. MB 4005-10 FIN. MB
REF.
A mm
B mm
M
133769 133820 133868 133929 133998 134070 134124 134193 134278 134346 134414 134476
6
40
g
100
2-3,8
6
40
100
2-3,8
6
40
100
2-3,8
6
75
150
3,5-5,8
6
75
150
3,5-5,8
6
75
150
3,5-5,8
6
135
200
5-7,5
6
135
200
5-7,5
6
135
200
5-7,5
6
203
250
6-9,4
6
203
250
6-9,4
6
203
250
6-9,4
4093-B5 4093-B5 4093-B5 4093-B4 4093-B4 4093-B4 4093-B4 4093-B4 4093-B4 4093-B3 4093-B3 4093-B3
g
A mm
B mm
M
135688 135756 135824 135848 135916 136081 135978 136043 136234 136296 136357 136425
6
43
100
1,6-3,8
6
43
100
1,6-3,8
6
43
100
1,6-3,8
6
77
150
2,9-5,4
6
77
150
2,9-5,4
6
77
150
2,9-5,4
6
140
200
4,5-7,1
6
140
200
4,5-7,1
6
140
200
4,5-7,1
6
243
250
5,6-9
6
243
250
5,6-9
6
243
250
5,6-9
4093-B5 4093-B5 4093-B5 4093-B4 4093-B4 4093-B4 4093-B4 4093-B4 4093-B4 4093-B3 4093-B3 4093-B3
€
4004-4 BAS. MB 4004-4 ENT. MB 4004-4 FIN. MB 4004-6 BAS. MB 4004-6 ENT. MB 4004-6 FIN. MB 4004-8 BAS. MB 4004-8 ENT. MB 4004-8 FIN. MB 4004-10 BAS.MB 4004-10 ENT. MB 4004-10 FIN. MB
Square 4006 MB
€
134728 134797 134872 134940 135015 135077 135145 135282 135350 135428
REF.
4006-4 BAS. MB 4006-4 ENT. MB 4006-4 FIN. MB 4006-6 BAS. MB 4006-6 ENT. MB 4006-6 FIN. MB 4006-8 BAS. MB 4006-8 ENT. MB 4006-8 FIN. MB 4006-10 BAS.MB 4006-10 ENT. MB 4006-10 FIN. MB
€
141
Normal saw 4042 MB REF.
Saw 4045 MB g
€
4042-3 V MB 4042-4 V MB 4042-5 V MB 4042-6 V MB 4042-7 V MB 4042-8 V MB
136944 137262 137019 130973 136692 136760
A mm
B mm
M
3,5-6,1
4093-B5 4093-B4 4093-B3 4093-B3 4093-B3 4093-B2
6
40
75
6
60
100
5,5-7,9
6
87
125
6,5-10,4
6
113
150
9-11,3
6
173
175
9-13,1
6
220
200
10-15
Triangular.
REF.
g
A mm
B mm
M
6
90
150
16
6
167
200
19
4093-B3 4093-A4
g
A mm
B mm
M
6
123
150
19
4093-B3 4093-B3 4093-A4 4093-A4 4093-A3 4093-A3
€
4045-6 1CR MB 4045-8 1CR MB
137330 137392
Parallel flat one rounded edge.
Rasps with dual material handle
Rasp 4101 MB REF.
Rasp 4102 MB g
A mm
B mm
M
6
107
150
15
6
107
150
15
6
177
200
19,5
6
177
200
19,5
6
290
250
24
6
290
250
24
4093-B3 4093-B3 4093-A4 4093-A4 4093-A3 4093-A3
€
4101-6 BAS. MB 4101-6 ENT. MB 4101-8 BAS. MB 4101-8 ENT. MB 4101-10 BAS MB 4101-10 ENT MB
136487 137583 137637 137699 137767 137835
Half rounded carpentry rasp.
4103-8 ENT. MB
Flat pointed.
142
€
4102-6 BAS. MB 4102-6 ENT. MB 4102-8 BAS. MB 4102-8 ENT. MB 4102-10 BAS MB 4102-10 ENT MB
138023 138085 138146 138214 138276 138337
6
123
150
19
6
192
200
24
6
192
200
24
6
300
250
29
6
300
250
29
g
A mm
B mm
M
150
6 6
4093-B4 4093-B4 4093-B4 4093-B3 4093-B3
Half rounded woodworking rasp.
Rasp 4103 MB REF.
REF.
Rasp 4104 MB €
086133
6
g
A mm
B mm
M
237
200
20
4093-A4
REF.
4104-6 BAS. MB 4104-6 ENT. MB 4104-8 ENT. MB 4104-10 BAS MB 4104-10 ENT MB Rounded.
€
138436 138498 138610 138658 138702
6
75
6
75
150
6
138
200
8
6
200
250
10
6
200
250
10
Stands and file Sets
File stands REF.
€
g
4450 4452
466409 414479
1 1
A mm
14.700 700 53.000 1.750
B mm
C mm
210 410
560 370
Small Stand Large Stand
4450 CONT.
6 6 6 6 6 6
4001-6 ENT MB 4001-8 ENT MB 4003-6 ENT MB 4003-8 ENT MB 4004-6 ENT MB 4004-8 ENT MB
REF.
CONT.
6 6 6 6 6 6 6
4005-6 ENT MB 4005-8 ENT MB 4102-6 ENT MB 4102-8 ENT MB 4103-8 ENT MB 4104-6 ENT MB 4104-8 ENT MB
INDUSTRIAL HAND TOOLS
REF.
4452 REF.
CONT.
6 6 6 6 6 6 6 6 6 6 6 6
4001-4 BMB 4001-6 BMB 4001-8 BMB 4001-10 BMB 4001-4 EMB 4001-6 EMB 4001-8 EMB 4001-10 EMB 4003-4 BMB 4003-6 BMB 4003-8 BMB 4003-10 BMB
REF.
CONT.
REF.
6 6 6 6 6 6 6 6 6 6 6 6
4003-4 EMB 4003-6 EMB 4003-8 EMB 4003-10 EMB 4004-6 BMB 4004-8 BMB 4004-4 EMB 4004-6 EMB 4004-8 EMB 4042-4 MB 4042-5 MB 4042-6 MB
03
CONT.
6 6 6 6 6 6 6 6
4042-7 MB 4042-8 MB 4101-6 EMB 4101-8 EMB 4101-10 EMB 4104-6 EMB 4104-8 EMB 4104-10 EMB
4096 REF.
File Kits REF.
4096
€
610079
3
g
A mm
B mm
C mm
540
440
140
35
4001-8 EMB 4003-8 EMB 4004-8 EMB
CONT.
1 1 1
143
Bench vice
03
Advantages: • Clamping in safety. • Easy to use. • Long-lasting tools. • Optimising clamping force. Features: • Heat treated milled vices for better grip. • Broad anvil providing a larger working area. • Support on a square guide. • Option for including accessories: Rotating base and jaws. • High strength. Utilizz: • For holding, gripping and mounting different parts / profiles.
A
C
Bench vice 6700 REF.
Bench vice 6710
€
g
6700-100 6700-125 6700-150 6700-175
026313 026337 019872 019858
1 1 1 1
7.000 11.000 17.000 26.000
A mm B mm C mm D mm E mm
REF.
100 125 150 175
6710-80 6710-100 6710-125 6710-150
125 148 178 208
125 60 150 70 200 90 220 105
52 62 75 95
Rotating base 6701 g
035599 035605 035612 035629
1 1 1 1
800 1.250 2.000 2.800
REF.
6700-100 6700-125 6700-150 6700-175
Clamps 6702 REF.
6702-100 6702-125 6702-150 6702-175
144
A mm B mm C mm D mm E mm
g
365375 353419 353457 353488
1 1 1 1
5.400 75 115 75 65 6.300 100 123 75 66 11.600 125 151 100 90 20.000 150 174 125 115
46 54 65 77
Rotating base 6711
€
6701-100 6701-125 6701-150 6701-175
€
Cast bench vice.
Forged bench vice.
REF.
D
E
B
€
6711-80 6711-100 6711-125 6711-150
g
365436 353549 353570 353600
1 1 1 1
700 700 1.450 2.100
365481 353686 353730 353785
2 2 2 2
200 310 460 900
6710-80 6710-100 6710-125 6710-150
Clamps 6712 €
g
035636 035643 035650 035667
1 1 1 1
310 460 900 960
REF.
12-55 12-75 17-90 17-120
6700-100 6700-125 6700-150 6700-175
6712-80 6712-100 6712-125 6712-150
€
g
6710-80 6710-100 6710-125 6710-150
Clamps and rapid grip clamps
03
Clamps features: • Nodular cast steel heads. • Calibrated steel toothed wheel. • Anti-slip brake on the moving head. • Flat surface mounting. • Wooden or iron handle. Uses: • For holding, gripping and mounting different parts / profiles.
Rapids grip clamps features: • One handed ergonomically designed clamps. • Interchangeable soft plastic jaws to prevent the working surface from being marked. • Calibrated steel bar. • Stops on the bar preventing the moving jaw from coming out. Uses: • For holding, gripping and mounting different parts / profiles.
D A B
c
REF.
Clamp 51201 €
g
51200-15 51200-20 51200-25 51200-30
215236 215298 215366 215434
1 1 1 1
500 540 590 630
A mm B mm C mm D mm
18 18 18 18
7 7 7 7
70 70 70 70
150 200 250 300
Wooden handle. Spindle threads.
REF.
€
g
51201-15 51201-20 51201-25 51201-30
215564 215632 215694 215755
1 1 1 1
A mm B mm C mm D mm
18 18 18 18
500 540 590 630
7 7 7 7
70 70 70 70
150 200 250 300
Iron handle. Spindle cross threads.
INDUSTRIAL HAND TOOLS
Clamp 51200
03
Clamp 51210 and 51220 REF.
Clamp 51215 and 51225
€
g
51210-25 51210-30 51210-40 51210-50 51210-60 51210-80 51220-60 51220-120 51220-150
215960 216035 216097 216165 216233 216295 217094 217292 217360
1 1 1 1 1 1 1 1 1
1.400 1.480 1.660 1.850 2.040 2.420 2.680 4.000 4.660
A mm B mm C mm D mm
30 30 30 30 30 30 35 35 35
8 8 8 8 8 8 8 8 8
90 250 90 300 90 400 90 500 90 600 90 800 120 600 120 1.200 120 1.500
Wooden handle. Spindle threads.
g
551884 551907
1 1
640 740
A mm B mm C mm D mm
19 19
5 5
105 105
450 600
Holding and separating function. Easy jaw change system. 130 and 140 kg pressures.
51300-M Bag with 4 units.
A mm B mm C mm D mm
1 1 1 1 1 1 1 1 1 1 1
1.520 1.700 1.920 2.060 2.500 2.220 2.330 2.550 2.770 3.210 3.650
1
630
30 30 30 30 30 35 35 35 35 35 35
8 8 8 8 8 8 8 8 8 8 8
90 300 90 400 90 500 90 600 90 800 120 350 120 400 120 500 120 600 120 800 120 1.000
REF.
€
g
51303-300X
551921
A mm B mm C mm D mm
19
6
90
300
Mechanism for gradually changing the strength. Exerts more pressure, up to 150 kg.
Mouth clamp 51300-M REF.
g
216561 216639 216691 216752 216813 217490 217568 217636 217698 217766 217834
Heavy duty clamp 51303
€
51300-450 51300-600
€
51215-30 51215-40 51215-50 51215-60 51215-80 51225-35 51225-40 51225-50 51225-60 51225-80 51225-100
Iron handle. Spindle cross threads.
Reversible clamp 51300 REF.
REF.
Pinza 51301
€
563436
1
g
A mm
B mm
25
40
48
REF.
51301-50 51301-76
€
551945 551969
20 40
g
A mm
B mm
C mm
150 200
50 76
170 197
29 29
Moving jaws with extra width for holding larger surfaces. Manganese silicon tempered spring steel, with a hardness of 47 HRc.
145
03
Riveter Riveter
Riveter 6170 REF.
€
6170
340778
6
g
A mm
B mm
C mm
710
78
65
250
Includes: accessories for 2.2 mm, 2.4 mm, 4 mm and 4.8 mm rivets, plus assembly spanner.
Toolboxes
6902
6900
Metal Boxes 6900-6902 REF.
6900-400 6900-500 6902-500
146
Plastic boxes 6904
€
057133 057140 057157
1 1 1
g
A mm
B mm
C mm
REF.
3.500 4.000 5.500
400 500 500
200 200 200
180 180 230
6904-420 6904-470 6904-520
€
199123 199260 199338
4 4 4
g
A mm
B mm
C mm
760 1.100 1.735
420 470 520
230 260 280
220 230 250
Industrial lubricants
REF.
Penetrating oil 6661
€
6660
ml
299458
24
270
REF.
€
6661
ml
299762
24
270
INDUSTRIAL HAND TOOLS
Multipurpose lubricant 6660
03
Grease spray 6662 REF.
6662
Lithium grease 6663 €
ml
299854
12
400
REF.
6663
€
ml
299915
24
150
147