INDUSTRY
FILES AND RASPS
Files and rasps
Half rounded 4003 REF.
4003-4 BAS. 4003-4 ENT. 4003-4 FIN. 4003-6 BAS. 4003-6 ENT. 4003-6 FIN. 4003-8 BAS. 4003-8 ENT. 4003-8 FIN. 4003-10 BAS. 4003-10 ENT. 4003-10 FIN. 4003-12 BAS. 4003-12 ENT. 4003-12 FIN. 4003-14 BAS. 4003-14 ENT.
M: Reference of the suitable handle for the file.
MECHANICAL FILES • Special chrome alloy forged steel. • Double treatment: globular hardening and complete tempering. • Perfectly straight. • Flat pointed, parallel flat, half rounded, rounded, triangular, square, flat thin, knife rasps. • Option to put a dual material handle.
Rounded 4004 g
€
A mm
B mm
6,82 408102
M
18
100
8,9-10,6
4089-2 / 4090-2 / 4093-B4
53
150
12,7-15
4089-4 / 4090-3 / 4093-B3
123
200 14,8-19,8
230
250
6
385
300 19,5-28,5 4090-6 / 4093-A2
6
586
350
23-33,2
4090-6 / 4093-A1
g
A mm
B mm
M
7,20 408300 12 7,52 408508 7,52 408706 7,85 408904 12 8,18 409307 8,74 409505 9,35 409703 12 9,95 410105
4089-7 / 4090-4 / 4093-A4
12,29 410303 12,76 410501 12
19-24
4090-5 / 4093-A3
13,50 410709 15,93 410907 16,54 411102 17,85 411300 19,57 411508 20,65 411706
Triangular 4005 REF.
A
B
Flat pointed 4001 REF.
4001-4 BAS. 4001-4 ENT. 4001-4 FIN. 4001-6 BAS. 4001-6 ENT. 4001-6 FIN. 4001-8 BAS. 4001-8 ENT. 4001-8 FIN. 4001-10 BAS. 4001-10 ENT. 4001-10 FIN. 4001-12 BAS. 4001-12 ENT. 4001-12 FIN. 4001-14 BAS. 4001-14 ENT. 4001-14 FIN.
116
Parallel flat 4002 g
€
A mm
B mm
4,49 400106 4,68 400304 12
25
100
7,9-11,2
5,01 400502 5,14 400700 5,38 400908 12
70
150 10,5-15,1
5,80 401301 6,64 401509 6,92 401707 12
150
200 13,3-19,2
7,38 402100
M
4089-2 / 4090-2 / 4093-B4 4089-4 / 4090-3 / 4093-B3 4089-7 / 4090-4 4093-A4
9,07 402308 9,62 402506 12
271
250
16-24,4
4090-5 / 4093-A2
10,19 402704 12,15 402902 12,66 403107
6
463
300
19-29
4090-6 / 4093-A2
13,55 403305 14,72 403503 15,52 403701 16,45 403909
6
720
350
22,5-34
4090-6 / 4093-A1
REF.
4002-4 BAS. 4002-4 ENT. 4002-4 FIN. 4002-6 BAS. 4002-6 ENT. 4002-6 FIN. 4002-8 BAS. 4002-8 ENT. 4002-8 FIN. 4002-10 BAS. 4002-10 ENT. 4002-10 FIN. 4002-12 BAS. 4002-12 ENT. 4002-12 FIN. 4002-14 BAS. 4002-14 ENT.
g
€
A mm
B mm
4,49 404203 4,68 404401 12
27
100
11,2
4089-2 / 4090-2 / 4093-B4
75
150
15,1
4089-4 / 4090-3 / 4093-B3
156
200
19,2
4089-7 / 4090-4 / 4093-A4
279
250
24,4
4090-5 / 4093-A2
4,87 404609 5,14 404807 5,38 405002 12 5,80 405200 6,64 405606 6,92 405804 12
M
7,38 406009
4005-4 BAS. 4005-4 ENT. 4005-4 FIN. 4005-6 BAS. 4005-6 ENT. 4005-6 FIN. 4005-8 BAS. 4005-8 ENT. 4005-8 FIN. 4005-10 BAS. 4005-10 ENT. 4005-10 FIN. 4005-12 BAS. 4005-12 ENT. 4005-12 FIN.
REF.
g
A mm
B mm
M
12
10
100
2-3,8
4089-1 / 4090-1 / 4093-B5
12
29
150
3,5-5,8
4089-2 / 4090-2 / 4093-B4
12
73
200
5-7,5
4089-3 / 4090-3 / 4093-B4
12
143
250
6-9,4
4089-4 / 4090-4 / 4093-B3
6
278
300
7-11,4
4089-4 / 4090-4 / 4093-B3
g
A mm
B mm
M
12
13
100
1,6-3,8
4089-1 / 4090-1 / 4093-B5
12
39
150
2,9-5,4
4089-2 / 4090-2 / 4093-B4
12
91
200
4,5-7,1
4089-3 / 4090-3 / 4093-B4
12
180
250
5,6-9
4089-4 / 4090-4 / 4093-B3
6
313
300
6,6-11,6
4089-4 / 4090-4 / 4093-B2
€
4004-4 BAS. 4,07 412109 4004-4 ENT. 4,25 412307 4004-4 FIN. 4,44 412505 4004-6 BAS. 5,14 413304 4004-6 ENT. 5,33 413502 4004-6 FIN. 5,52 413908 4004-8 BAS. 6,08 414103 4004-8 ENT. 6,27 414301 4004-8 FIN. 6,78 414707 4004-10 BAS. 8,18 414905 4004-10 ENT. 8,59 415100 4004-10 FIN. 9,11 415308 4004-12 BAS. 10,56 415506 4004-12 ENT. 11,22 415704 4004-12 FIN. 11,86 415902
INDUSTRY
Advantages: • Fast working. • Long-lasting tools. • Wide range. Features: • Improved quality carbon steel. • Hardening treatment. • High hardness. • Wooden plastic and bimaterial handles (ergonomics). • High wear resistance. Uses: • For regrinding, filing, rasping and finishing jobs.
Square 4006
€
4,35 416800 4,49 417005 12
22
100
5,5-8,5
4089-2 / 4090-1 / 4093-B4
77
150
8-12,5
4089-3 / 4090-3 / 4093-B3
4,81 417203 5,84 418002 6,22 418200 12 6,64 418606 7,34 418903 7,76 419108 12
200 10,5-15,6
285
250
450
300 12,5-20,6 4090-6 / 4093-B1
8,28 419405 10,56 419603 11,26 419801 12
4089-4 / 4090-4 / 4093-B2
160
11-17,8
12,05 420005
4089-7 / 4090-5 / 4093-B1
14,25 420203 15,00 420401
6
REF.
€
4006-4 BAS. 5,24 422009 4006-4 ENT. 5,33 422207 4006-4 FIN. 5,47 422405 4006-6 BAS. 5,89 423204 4006-6 ENT. 6,08 423402 4006-6 FIN. 6,50 423600 4006-8 BAS. 6,78 423907 4006-8 ENT. 7,01 424102 4006-8 FIN. 7,52 424300 4006-10 BAS. 8,92 424508 4006-10 ENT. 9,62 424706 4006-12 BAS. 12,05 425109 4006-12 ENT. 12,56 425307 4006-12 FIN. 13,46 425505
15,98 420609
9,07 406207 9,62 406405 12 10,19 406603
Flat thin 4007
12,15 406801 12,66 407006
6
476
300
29
4090-6 / 4093-A2
6
750
350
34
4090-6 / 4093-A1
13,55 407204 14,72 407402 15,52 407600
REF.
4007-6 BAS. 4007-6 ENT. 4007-6 FIN.
Knife 4008 g
€
A mm
B mm
6,82 426908 7,01 7,29
427103 12 427301
30
150
1,8-15,6
M
4089-4 / 4090-3 / 4093-B3
REF.
g
A mm
B mm
M
4008-6 BAS. 4008-6 ENT. 4008-6 FIN.
429107 9,95 429305 12 10,56 429503
37
150
10-16,6
4089-4 / 4090-3 / 4093-B3
4008-8 ENT.
12,11 430004 12
73
200
12,5-21
4089-7 / 4090-4 / 4093-A4
4008-10 BAS. 14,90 430400 12 4008-10 ENT. 15,70 430608
122
250
15-26
4089-7 / 4090-5 / 4093-A3
€
9,35
117
FILES AND RASPS / SHARPENING FILES
SHARPENING FILES
NEEDLE FILES
• Specially for sharpening all types of agricultural tools: machetes, hoes, etc. • Extra thin, thin, normal, rounded and triangular files.
Extra thin 4040 REF.
• For use by watchmakers, jewellery makers, engravers. • Flat pointed, rounded, half rounded, triangular, flat parallel files.
Thin 4041 g
€
A mm
B mm
5,52
431605 12
19
125
3,5-6,1
4040-6
5,80
431803 12
27
150
4-6,9
4089-1 / 4090-2 / 4093-B5 4089-2 / 4090-3 / 4093-B4
REF.
g
€
A mm
4041-4
4,40 432305
12
12
100
4041-5
4,49
432701
12
26
125
4041-6
5,01 432909
12
48
150
4041-7
5,52 433104
12
66
175
4041-8
6,64 433302
12
103
200
B mm
M
4089-1 / 4090-1 / 3,1-5,5 4093-B5 4089-2 / 4090-2 / 4-7 4093-B5 4089-2 / 4090-3 / 5,1-9,1 4093-B3 4089-3 / 4090-4 / 5,9-10,4 4093-B3 4089-3 / 4090-4 / 6,7-12,2 4093-B2
Flat pointed 4071
Rounded 4072
€
REF.
5,28 5,28 5,28
4071-16 BAS. 4071-16 ENT. 4071-16 FIN.
444506 444902 445107
12 12 12
g
A mm
B mm
REF.
8 8 8
160 160 160
5,96 5,96 5,96
4072-16 BAS. 4072-16 ENT. 4072-16 FIN.
g
A mm
B mm
REF.
€
4,44 4,44 4,44
g
A mm
B mm
445305 445701 445909
12 12 12
9 9 9
160 160 160
2,92 2,92 2,92
g
A mm
B mm
447903 448306 448504
12 12 12
9 9 9
160 160 160
3,5 3,5 3,5
INDUSTRY
4040-5
M
REF.
€
g
A mm
4042-3 V
4,02 433609 12
11
75
4042-4 V
4,07 434002 12
23
100
4042-5 V
4,58 434606 12
50
125
4042-6 V
5,38 435009 12
77
150
4042-7 V
6,27 435405 12
114
175
4042-8 V
6,97
435801 12
158
200
4042-9 V
8,18
436204 12
222
225
4042-10 V
9,16
Half rounded 4074
Rounded 4050 for power saws
Normal 4042
436501 12
291
250
B mm
M
4089-1 / 4090-1 / 4093-B5 4089-2 / 4090-1 / 5,5-7,9 4093-B4 4089-3 / 4090-2 / 6,5-10,4 4093-B3 4089-3 / 4090-3 / 9-11,3 4093-B3 4089-3 / 4090-4 / 9-13,1 4093-B3 4089-4 / 4090-4 / 10-15 4093-B2 4089-4 / 4090-5 / 10-16,5 4093-B2 4089-7 / 4090-5 / 11-17,3 4093-B1 3,5-6,1
REF.
4050-8x4,0
g
A mm
B mm
M
28
200
3,98
M4093-B4
6
28
200
3,98
M4093-B4
1,85 469363 12
31
200
4,5
M4093-B4
6
31
200
4,5
M4093-B4
442502 12
33
200
4,76
M4093-B4
€
442601 12
1,85
4050-8x4,0 BS 4,02 612059 4050-8x4,5
4050-8x4,5 BS 4,02 612073 4050-8x4,8
1,85
6
33
200
4,76
M4093-B4
4050-8x5,5
12
36
200
5,55
M4093-B4
REF.
M4093-B4
4076-16 BAS. 4076-16 ENT. 4076-16 FIN.
1,85 442700
4050-8x5,5 BS 4,02
612110
6
36
200
5,55
BS: bag with two files.
8,59 8,59 8,59
4074-16 BAS. 4074-16 ENT. 4074-16 FIN.
4050-8x4,8 BS 4,02 612097
Triangular 4075
€
REF.
446906 447309 447507
12 12 12
9 9 9
160 160 160
5,5 5,5 5,5
g
A mm
B mm
448702 449105 449303
12 12 12
9 9 9
160 160 160
6 6 6
€
5,01 5,01 5,01
4075-16 BAS. 4075-16 ENT. 4075-16 FIN.
Parallel flat 4076 €
5,28 5,28 5,28
Flat with handle 4082 REF.
Triangular 4081 REF.
€
g
A mm
B mm
4081-5
3,93 466607
12
60
125
6,5-10,6
4081-6
4,44 466706
12
77
150
9-11,5
4081-7
5,33 466805 12
115
175
9-13,3
4081-8
6,50 466904 12
160
200
10-15,2
4081-10
118
8,55 469233
€
467000 467154 467208
4082-6 4082-8 4082-10
12 260
250
11-17
M
4089-3 / 4090-2 / 4093-B3 4089-4 / 4090-3 / 4093-B3 4089-4 / 4090-4 / 4093-B3 4089-4 / 4090-4 / 4093-B2 4089-7 / 4090-5 / 4093-B1
12 12 6
g
A mm
B mm
120 190 417
150 200 250
20 25 29
For sharpening hoes and machetes. Note: orders have a minimum quantity requirement.
Needle file Kits REF.
4077-16
Triangular parallel 4087 REF.
4087-6
g
€
7702956019893 12
77
ABmm mmB mm
150
11
M
4089-4 / 4090-3/ 4093-B3
For sharpening machetes. Note: orders have a minimum quantity requirement.
Needle file Kits
€
65,68
4071-16 BAS - 1 4072-16 FIN - 1 4074-16 BAS - 1 4075-16 FIN - 1
466201
1
g
A mm
B mm
C mm
150
170
45
20
4071-16 FIN - 1 4073-16 BAS - 1 4074-16 FIN - 1 4076-16 BAS - 1
Box of assorted 12 fine and medium files.
4072-16 BAS - 1 4073-16 FIN - 1 4075-16 BAS - 1 4076-16 FIN - 1
REF.
4078-16
€
32,88
4071-16 BAS - 1 4072-16 FIN - 1 4074-16 BAS - 1 4075-16 FIN - 1
466300
1
4071-16 FIN - 1 4073-16 BAS - 1 4074-16 FIN - 1 4076-16 BAS - 1
g
A mm
B mm
C mm
60
190
120
7
4072-16 BAS - 1 4073-16 FIN - 1 4075-16 BAS - 1 4076-16 FIN - 1
Bag of assorted 6 needle files.
119
FILES AND RASPS / CARPENTER´S RASPS
CARPENTER’S RASPS
FILES WITH BIMATERIAL HANDLE
• For work in wooden joinery. • Half rounded carpentry, half rounded woodworking, flat pointed and rounded.
g
€
4101-6 BAS. 4101-6 ENT. 4101-6 FIN. 4101-8 BAS. 4101-8 ENT. 4101-8 FIN. 4101-10 BAS. 4101-10 ENT. 4101-10 FIN. 4101-12 BAS. 4101-12 ENT. 4101-12 FIN.
Half rounded woodworking rasp 4102
A mm
B mm
M
10,79 453805 11,12 454000 12
59
4089-4 / 4090-3 / 4093-B3
15
150
11,49 454208 12,01 454406 13,03 454604 12
119
200
4089-4 / 4090-4 / 4093-A4
19,5
15,37 454802 14,16 455007 16,40 455205 12
229
19,39 455403 16,96 455601 19,16 455809
6
375
300
4102-6 ENT.
10,84 456400 12
4102-8 BAS. 4102-8 ENT. 4102-10 BAS. 4102-10 ENT.
11,78 457001 12,76 457209 14,16 457803 15,42 458008
12 12
A mm
B mm
59
150
19
121
200
24
210
250
29
M
4089-4 / 4090-3 / 4093-B3 4089-4 / 4090-4 / 4093-A4 4089-7 / 4090-5 / 4093-A3
4090-6 / 4093-A2
28,5
22,52 456004
Flat pointed 4103 REF.
13,03 459708 12
154
A mm
B mm
M
20
4089-7 / 4090-4 / 4093-A4
200
REF.
g
€
A mm
B mm
4104-6 BAS. 4104-6 ENT.
5,65 461008
12
29
150
6
4104-8 ENT.
8,41 462005 12
71
200
8
143
250
10
6,27 461206
4104-10 BAS. 9,49 462609 12 4104-10 ENT. 10,46 462807
Rasp 4132
Rasp 4135 g
€
23,69 36,02
186673 014181
6 6
ABmm mmB mm
622 354 622 354
44 44
M
REF.
4090-7/4090-7NG 4090-7/4090-7NG
SHR: special re-sharpening.
708944122146
6
A mm B mm
618 427
44
M
g
€
4135-14 FINISH
REF.
4090-7/4090-7NG
Extreme cut. coarse file side.
ABmm mmB mm
655579199183
6 624 425
708944122252
6
44
M
4090-7/4090-7NG
g
€
4134-14 RAPTOR
ABmm mmB mm
827 427
59
Extra width: greater cutting surface. Coarse file side.
63
100
7,9-11,2
6
63
100
7,9-11,2
6
125
150 10,5-15,1
6
125
150 10,5-15,1
6
125
150 10,5-15,1
6
220
200 13,3-19,2
6
220
200 13,3-19,2
6
220
200 13,3-19,2
6
353
250
16-24,4
6
353
250
16-24,4
6
353
250
16-24,4
4093-B4 4093-B4 4093-B3 4093-B3 4093-B3 4093-A4 4093-A4 4093-A4 4093-A2 4093-A2 4093-A2
g
A mm
B mm
M
6
Half rounded 4003 MB 4003-4 BAS. MB 4003-4 ENT. MB 4003-4 FIN. MB 4003-6 BAS. MB 4003-6 ENT. MB 4003-6 FIN. MB 4003-8 BAS. MB 4003-8 ENT. MB 4003-8 FIN. MB 4003-10 BAS.MB 4003-10 ENT. MB 4003-10 FIN. MB
REF.
A mm
B mm
M
67
g
100
11,2
6
67
100
11,2
6
130
150
15,1
6
130
150
15,1
6
130
150
15,1
6
223
200
19,2
6
223
200
19,2
6
223
200
19,2
6
392
250
24,4
6
392
250
24,4
6
392
250
24,4
4093-B4 4093-B4 4093-B3 4093-B3 4093-B3 4093-A4 4093-A4 4093-A4 4093-A2 4093-A2 4093-A2
g
A mm
B mm
M
6
40
100
2-3,8
6
40
100
2-3,8
6
40
100
2-3,8
6
75
150
3,5-5,8
6
75
150
3,5-5,8
6
75
150
3,5-5,8
6
135
200
5-7,5
6
135
200
5-7,5
6
135
200
5-7,5
6
203
250
6-9,4
6
203
250
6-9,4
6
203
250
6-9,4
4093-B5 4093-B5 4093-B5 4093-B4 4093-B4 4093-B4 4093-B4 4093-B4 4093-B4 4093-B3 4093-B3 4093-B3
g
A mm
B mm
M
6
43
100
1,6-3,8
6
43
100
1,6-3,8
6
43
100
1,6-3,8
6
77
150
2,9-5,4
6
77
150
2,9-5,4
6
77
150
2,9-5,4
6
140
200
4,5-7,1
6
140
200
4,5-7,1
6
140
200
4,5-7,1
6
243
250
5,6-9
6
243
250
5,6-9
6
243
250
5,6-9
4093-B5 4093-B5 4093-B5 4093-B4 4093-B4 4093-B4 4093-B4 4093-B4 4093-B4 4093-B3 4093-B3 4093-B3
€
4002-4 BAS. MB 6,22 109986 4002-4 ENT. MB 6,27 110043 4002-6 BAS. MB 6,74 111064 4002-6 ENT. MB 6,82 120585 4002-6 FIN. MB 7,25 131741 4002-8 BAS. MB 7,99 131819 4002-8 ENT. MB 8,51 131871 4002-8 FIN. MB 8,88 131932 4002-10 BAS.MB 10,71 109900 4002-10 ENT. MB 11,08 109962 4002-10 FIN. MB 11,78 132045
6
Rounded 4004 MB
€
8,41 132465
6
57
100
8,9-10,6
9,91 132724
6
103
150
12,7-15
10,09 132786
6
103
150
12,7-15
10,61 132847
6
173
200 14,8-19,8
11,92 132915
6
173
200 14,8-19,8
12,25 132977
6
173
200 14,8-19,8
13,97 133042
6
283
250
19-24
14,49 133110
6
283
250
19-24
15,09 133172
6
283
250
19-24
4093-B4 4093-B4 4093-B4 4093-B3 4093-B3 4093-B3 4093-A4 4093-A4 4093-A4 4093-A3 4093-A3 4093-A3
8,74 132526
6
57
100
8,9-10,6
8,88 132588
6
57
100
8,9-10,6
8,98 132656
6
103
150
12,7-15
g
A mm
B mm
M
6
60
100
5,5-8,5
6
127
150
8-12,5
6
127
150
8-12,5
6
127
150
8-12,5
6
225
200 10,5-15,6
6
225
200 10,5-15,6
6
225
200 10,5-15,6
6
357
250
11-17,8
6
357
250
11-17,8
6
357
250
11-17,8
4093-B4 4093-B3 4093-B3 4093-B3 4093-B2 4093-B2 4093-B2 4093-B1 4093-B1 4093-B1
Rasp 4133
C
Hammer 8027 €
27,65 29,24
1/2 file. Two-handed.
464924 464931
6 6
g
A mm
B mm
593 678
356 406
44 44
REF.
8027
B mm g A mm B mm C mm
€
27,84
Horseshoeing hammer.
144604
6
170
Triangular 4005 MB REF.
A
120
M
REF.
€
4004-4 BAS. MB 5,61 133769 4004-4 ENT. MB 5,75 133820 4004-4 FIN. MB 5,80 133868 4004-6 BAS. MB 6,64 133929 4004-6 ENT. MB 6,82 133998 4004-6 FIN. MB 7,01 134070 4004-8 BAS. MB 7,57 134124 4004-8 ENT. MB 7,71 134193 4004-8 FIN. MB 8,14 134278 4004-10 BAS.MB 9,86 134346 4004-10 ENT. MB 10,09 134414 4004-10 FIN. MB 10,71 134476
M
4090-7/4090-7NG
B
4133-14 4133-16
B mm
Rasp 4134 g
€
4131-34 RAZOR
REF.
A mm
For finishing.
Rasp 4131 REF.
4001-4 BAS. MB 6,12 097818 4001-4 ENT. MB 6,41 093650 4001-6 BAS. MB 6,82 093865 4001-6 ENT. MB 7,25 093759 4001-6 FIN. MB 7,95 098051 4001-8 BAS. MB 7,99 098242 4001-8 ENT. MB 8,65 098549 4001-8 FIN. MB 8,88 098679 4001-10 BAS.MB 10,94 131666 4001-10 ENT. MB 11,08 099171 4001-10 FIN. MB 11,78 099294
REF.
• Especially recommended for shoeing horses. • Maximum accuracy and a perfect finish guaranteed. • Blacksmith file with 1/2 shaft rapid finish, fine finish, 2-handed and two sided rasping.
4132-14 SHDA 4132-14 SHR
Parallel flat 4002 MB g
€
M
4089-2 / 4090-2 / 4093-B4 4089-3 / 4090-3 / 4093-B4 4089-4 / 4090-5 / 4093-B3
HORSESHOEING LINE
REF.
Flat pointed 4001 MB REF.
Rounded 4104 g
€
4103-8 ENT.
g
€
4089-7 / 4090-5 / 4093-A3
24
250
REF.
305
111
15,5
Square 4006 MB
€
4005-4 ENT. MB 5,98 134728 4005-6 BAS. MB 7,34 134797 4005-6 ENT. MB 7,71 134872 4005-6 FIN. MB 7,99 134940 4005-8 BAS. MB 8,88 135015 4005-8 ENT. MB 9,25 135077 4005-8 FIN. MB 9,86 135145 4005-10 BAS.MB 12,15 135282 4005-10 ENT. MB 12,66 135350 4005-10 FIN. MB 13,50 135428
REF.
€
4006-4 BAS. MB 6,82 135688 4006-4 ENT. MB 6,87 135756 4006-4 FIN. MB 6,97 135824 4006-6 BAS. MB 7,71 135848 4006-6 ENT. MB 7,76 135916 4006-6 FIN. MB 7,99 136081 4006-8 BAS. MB 8,74 135978 4006-8 ENT. MB 8,98 136043 4006-8 FIN. MB 9,02 136234 4006-10 BAS.MB 10,61 136296 4006-10 ENT. MB 11,08 136357 4006-10 FIN. MB 11,92 136425
121
INDUSTRY
Half rounded carpentry rasp 4101 REF.
FILES AND RASPS / FILES WITH BIMATERIAL HANDLE
EXHIBITORS AND FILE SETS
Normal saw 4042 MB REF.
Saw 4045 MB g
€
4042-3 V MB 4042-4 V MB 4042-5 V MB 4042-6 V MB 4042-7 V MB 4042-8 V MB
5,42 5,42 6,17 6,82 7,71 8,55
136944 137262 137019 130973 136692 136760
A mm
B mm
M
3,5-6,1
4093-B5 4093-B4 4093-B3 4093-B3 4093-B3 4093-B2
6
40
75
6
60
100
5,5-7,9
6
87
125
6,5-10,4
6
113
150
9-11,3
6
173
175
9-13,1
6
220
200
10-15
4045-6 1CR MB 4045-8 1CR MB
g
A mm
B mm
M
10,09 137330
6
90
150
16
11,78 137392
6
167
200
19
4093-B3 4093-A4
€
Parallel flat one rounded edge.
INDUSTRY
Triangular.
REF.
Small Stand REF.
RASPS WITH BIMATERIAL HANDLE
4450
Large Stand B mm g A mm B mm C mm
€
777,54
4001-6 ENT MB - 6 4003-8 ENT MB - 6 4005-6 ENT MB - 6 4102-8 ENT MB - 6 4104-8 ENT MB - 6
Rasp 4101 MB REF.
4101-6 BAS. MB 4101-6 ENT. MB 4101-8 BAS. MB 4101-8 ENT. MB 4101-10 BAS MB 4101-10 ENT MB
g
A mm
B mm
M
150
15
4093-B3 4093-B3 4093-A4 4093-A4 4093-A3 4093-A3
12,29 136487
6
107
12,56 137583
6
107
150
15
13,83 137637
6
177
200
19,5
15,05 137699
6
177
200
19,5
15,75 137767
6
290
250
24
17,80 137835
6
290
250
24
Flat pointed.
122
4001-8 ENT MB - 6 4004-6 ENT MB - 6 4005-8 ENT MB - 6 4103-8 ENT MB - 6
210
560
4003-6 ENT MB - 6 4004-8 ENT MB - 6 4102-6 ENT MB - 6 4104-6 ENT MB - 6
4452
B mm g A mm B mm C mm
€
1.780,92
4001-4 BMB - 6 4001-10 BMB - 6 4001-8 EMB - 6 4003-6 BMB - 6 4003-4 EMB - 6 4003-10 EMB - 6 4004-4 EMB - 6 4042-4 V MB - 6 4042-7 V MB - 6 4101-8 EMB - 6 4104-8 EMB - 6
414479
1 53.000 1.750 410
4001-6 BMB - 6 4001-4 EMB - 6 4001-10 EMB - 6 4003-8 BMB - 6 4003-6 EMB - 6 4004-6 BMB - 6 4004-6 EMB - 6 4042-5 V MB - 6 4042-8 V MB - 6 4101-10 EMB - 6 4104-10 EMB - 6
370
4001-8 BMB - 6 4001-6 EMB - 6 4003-4 BMB - 6 4003-10 BMB - 6 4003-8 EMB -6 4004-8 BMB - 6 4004-8 EMB - 6 4042-6 V MB - 6 4101-6 EMB - 6 4104-6 EMB - 6
REF.
4102-6 BAS. MB 4102-6 ENT. MB 4102-8 BAS. MB 4102-8 ENT. MB 4102-10 BAS MB 4102-10 ENT MB
€
12,43 138023
6
g
A mm
B mm
M
123
150
19
15,09 138214
6
192
200
24
15,56 138276
6
300
250
29
16,73 138337
6
300
250
29
4093-B3 4093-B3 4093-A4 4093-A4 4093-A3 4093-A3
g
A mm
B mm
M
150
6 6
4093-B4 4093-B4 4093-B4 4093-B3 4093-B3
12,66 138085
6
123
150
19
13,65 138146
6
192
200
24
Half rounded woodworking rasp.
Rasp 4103 MB 4103-8 ENT. MB
1 14.700 700
Rasp 4102 MB €
Half rounded carpentry rasp.
REF.
466409
REF.
File Kits
Rasp 4104 MB €
14,58 086133
6
g
A mm
B mm
M
237
200
20
4093-A4
REF.
€
4104-6 BAS. MB 7,52 138436 4104-6 ENT. MB 8,18 138498 4104-8 ENT. MB 9,86 138610 4104-10 BAS MB 10,98 138658 4104-10 ENT MB 11,92 138702
6
75
6
75
150
6
138
200
8
6
200
250
10
6
200
250
10
REF.
4096 4001-8 EMB - 1
€
28,27
610079
3
4003-8 EMB - 1
g
A mm
B mm
C mm
540
440
140
35
4004-8 EMB - 1
Rounded.
123
HARDWARE TOOLS
Screwdrivers
Philips screwdriver 66220 REF.
66220-PH0 66220-PH1 66220-PH2 66220-PH3
Pozidriv screwdriver 66230
€
2,88 3,56 4,38 6,77
149814 149869 149920 149982
6 6 6 6
g
A mm
B mm
L mm
REF.
31 70 86 153
75 100 125 150
3 4,5 6 8
160 200 235 270
66230-PZ0 66230-PZ1 66230-PZ2 66230-PZ3
g
A mm
B mm
L mm
REF.
30 30 30 31 31 39 39 74 110 121 128
85 85 85 85 85 85 85 100 100 110 120
3 3 3 3 3 3,5 4 4,5 5,5 6 7
145 145 145 145 165 165 185 200 215 225 250
66281
g
A mm
B mm
C mm
470
165
312
42
€
3,41 3,87 4,74 7,08
150261 150315 150391 150452
g
A mm
B mm
L mm
6 6 6 6
31 70 87 151
75 100 125 150
3 4,5 6 8
160 200 235 270
g
A mm
B mm
C mm
1
11.355
600
500
280
INDUSTRY
Advantages: • Excellent performance. • Ergonomic handles. • Long-lasting tools. • Wide range. • Unequal tightening torque intensity. Features: • Heat treatment and fully tempered shaft. • Accurate shape. • High wear resistance. • Geometry of the socket to guaranteeing optimal connection preventing the shaft from turning in the handle. • Flathead, die cut, Phillips, Pozidriv and Torx heads. • Complies with standards: ISO 2380, ISO 8764, Camcar-Textron Standards. Uses: • For jobs involving tightening and removing screws.
TRIMAX SCREWDRIVERS • Trilobular shape matching the natural movement of the hand allowing 120o rotation. • Chrome-Molybdenum-Vanadium steel rod. • Matt chrome finish on the rod and tip: maximum corrosion protection. Torx screwdriver 66240 REF.
66240-T6 66240-T7 66240-T8 66240-T9 66240-T10 66240-T15 66240-T20 66240-T25 66240-T27 66240-T30 66240-T40
TRIMAX screwdriver Stand
€
4,02 3,97 3,97 3,82 3,72 3,92 3,97 4,64 4,64 5,55 6,72
150568 150629 150674 150735 150780 150841 150896 150957 151015 151060 151121
6 6 6 6 6 6 6 6 6 6 6
€
715,51 057706
66200-3X100 - 6 66210-4X100 - 6 66210-8X175 - 6 66220-PH2 - 6 66240-T10 - 6
66200-4X125 - 6 66210-5,5X125 - 6 66220-PH0 - 6 66230-PZ1 - 6 66240-T20 - 6
66200-5,5X150 - 6 66210-6,5X150 - 6 66220-PH1 - 6 66230-PZ2 - 6 66240-T25 - 6
L A B
Flat headed screwdriver 66200 REF.
66200-3x75 66200-3x100 66200-3.5x100 66200-4x100 66200-4x125 66200-5.5x125 66200-5.5x150 66200-6.5x150
124
€
2,36 2,52 2,61 3,01 3,03 3,77 4,28 5,09
148367 148169 148534 148695 148848 148893 148947 148992
6 6 6 6 6 6 6 6
Die cut screwdriver 66210 g
A mm
B mm
C mm
L mm
REF.
31 32 35 38 41 77 83 98
75 100 100 100 125 125 150 150
3 3 3,5 4 4 5,5 5,5 6,5
0,5 0,5 0,6 0,8 0,8 1 1 1,2
160 185 185 185 210 210 250 260
66210-4x100 66210-5.5x100 66210-5.5x125 66210-6.5x125 66210-6.5x150 66210-8x175 66210-10x200 66210-12x250
€
2,93 3,67 3,77 4,74 5,30 6,11 7,84 10,13
149319 149364 149425 149470 149531 149647 149692 149753
6 6 6 6 6 6 6 6
g
A mm
B mm
C mm
L mm
38 70 74 86 91 142 175 225
100 100 125 125 150 175 200 250
4 5,5 5,5 6,5 6,5 8 10 12
0,8 1 1 1,2 1,2 1,2 1,6 2
185 200 225 235 260 295 320 370
TRIMAX screwdriver Kit REF.
66291-ELEC 66200-3x100 - 1 66220-PH0 - 1
TRIMAX screwdriver Kit
€
20,05 333060
1
66200-4x125 - 1 66220-PH1 - 1
66200-5.5x125 - 1 66220-PH2 - 1
REF.
66292-MEC 66200-3x100 - 1 66210-6.5x150 - 1
€
22,50
153170
1
66200-4x125 - 1 66220-PH1 - 1
g
A mm
B mm
C mm
535
165
312
42
66210-5.5x125 - 1
125
SCREWDRIVERS AND TIPS / PRECISION SCREWDRIVERS
PRECISION SCREWDRIVERS
TIPS
Advantages: • Excellent control and precision work. • Maximum tip durability and precision. • Ergonomic and anti-slip handle. Features: • Handle head separated from the body for better support and ease of use. • Coloured ring for identification of the type of tip. • Bi-material handle: - Reinforced polymer: highly resistant to impacts. - Elastomer: maximum grip and comfort. • Rod: - CHROME MOLYBDENUM VANADIUM. - CNC machined, blued tips. Uses: • For precision mechanical and electronic tasks.
• Molybdenum-Vanadium chrome plated steel tip. • Sprayed and varnished to guarantee against rust. • For non-heat treated screws.
Bit holder 6307
Bit holder 6308 €
REF.
17,81
6307
623635
6
g
A mm
REF.
350
20,5
6308
L
623659
12
g
A mm
130
10,5
Phillips: PH0, PH1 and PH2 / Flat: 5, 6 and 7 / Hex: ¼”.
INDUSTRY
Phillips: PH1, PH2 and PH3 / Flat: 5, 6 and 8 / Pozidrive: PZ1 and PZ2 Torx: T15, T20, T25 y T30 / Hex: 2.5, 3, 4, 5, ¼”, 5/16”, 7/16” Vanadium chrome rod with chrome finish. Fully treated and tempered tips. Dual material handle: Dual direction ratchet for easy use. Magnetic system for grasping the tips. Internal storage of the tips.
€
7,08
A B Flat headed screwdriver 6250 REF.
6250-2.5x75 6250-3x100 6250-3x150
Pozidriv screwdriver 6250
€
3,31 3,21 3,31
096965 579031 579062
6 6 6
g
A mm
B mm
L mm
REF.
20 20 25
75 100 150
2,5 3 3
168 193 243
6250-PZ0 6250-PZ1
€
3,21 3,21
579093 579123
6 6
g
A mm
B mm
L mm
20 20
60 80
3 4,5
153 173
6300
66304
Adaptors and tip holders 6300 66304
Magnetizer
€
REF.
19,95 15,77
502329 152586
1 6
g
A mm
REF.
30 115
58 230
6299-B
6300: box with 3 units.
Phillips screwdriver 6250 REF.
6250-PH0 6250-PH1
579154 579185
6 6
g
A mm
B mm
L mm
20 20
60 80
3 4,5
153 173
REF.
6250-T6 6250-T7 6250-T8 6250-T9
€
4,64 4,43 4,64 4,94
579215 579246 579277 579307
6 6 6 6
g
A mm
B mm
L mm
20 20 20 20
60 60 60 60
3 3 3 3
153 153 153 153
Set
6250-1,5x60 - 1 6250-PH0 - 1
601428
4
g
A mm
B mm
C mm
240
250
120
30
6250-2,5x75 - 1 6250-PH00 - 1 6250-T5 - 1 6250-T6 - 1
Practical set for small jobs: glasses, mobile phones, cameras, consoles, etc.
126
A mm
B mm
C mm
50
50
29
Pozidriv tip 6313 €
0,69 0,69
319620 319729
g
A mm
100 100
5 5
25 25
g
A mm
B mm
C mm
74
45
14
65
Tip kit €
22,50
g
230
To magnetize and demagnetize screw drivers rods.
Phillips tip 6311 6311-PH2 6311-PH3
6250J
6
A
REF.
REF.
579352
Torx screwdriver 6250
€
3,51 3,72
€
12,68
REF.
6390-6 Flat: 0.8x5.5, 1.6x8 Philips: PH1, PH2 Pozidrive: PZ1, PZ2 Adaptor: 6300
REF.
6313-PZ1 6313-PZ2
€
0,69 0,69
319828 319873
100 100
g
A mm
5 5
25 25
Tip kit €
15,12
507379
6
REF.
6390-10
€
18,68
507430
1
g
A mm
B mm
C mm
132
50
14
107
Flat: 0.6x4.5, 0.8x5.5, 1.2x6.5, 1.6x8 Philips: PH1, PH2, PH3 Pozidrive: PZ1, PZ2, PZ3 Adaptor: 6300
127
HARDWARE TOOLS
Spanners OPEN END FIXED, COMBINED, DOUBLE RING END SPANNERS
Open end fixed spanner Sets 6490-6BS
Open end fixed spanner Sets
€
REF.
g
19,69
6400-6x7 - 1 6400-12x13 - 1
062519
450
1
6400-8x9 - 1 6400-10x11 - 1 6400-14x15 - 1 6400-16x17 - 1
6400-6x7 - 1 6400-12x13 - 1 6400-18x19 - 1
6490-10BS
• Wide openings. • Wide neck to withstand increased torque tensions. • Greater head thickness for improved nut clamping. • Tempered heat treatment.
018400
1
820
6400-8x9 - 1 6400-10x11 - 1 6400-14x15 - 1 6400-16x17 - 1 6400-20x22 - 1
Bag of 8 spanners.
Open end fixed spanner Sets REF.
g
30,27
6490-8BS
Bag of 6 spanners.
OPEN END FIXED, COMBINED, DOUBLE RING END SPANNERS
€
REF.
Open end fixed spanner Sets
€
g
43,76
6400-6x7 - 1 6400-12x13 - 1 6400-18x19 - 1 6400-24x26 - 1
018325
1.380
1
€
REF.
6400-8x9 - 1 6400-10x11 - 1 6400-14x15 - 1 6400-16x17 - 1 6400-20x22 - 1 6400-21x23 - 1
g
63,35
6490-12BS 6400-6x7 - 1 6400-12x13 - 1 6400-18x19 - 1 6400-24x26 - 1
Bag of 10 spanners.
018387
1
2.210
6400-8x9 - 1 6400-10x11 - 1 6400-14x15 - 1 6400-16x17 - 1 6400-20x22 - 1 6400-21x23 - 1 6400-25x28 - 1 6400-30x32 - 1
Bag of 12 spanners.
L L B
A A Open end fixed spanner 6400 REF.
6400-6x7 6400-8x9 6400-10x11 6400-12x13 6400-14x15 6400-16x17 6400-18x19 6400-20x22 6400-21x23 6400-24x26 6400-25x28 6400-27x29 6400-30x32 6400-32x36 6400-34x36 6400-36x41 6400-41x46 6400-46x50 Two openings.
Open end fixed spanner Sets
€
2,34 2,39 2,59 3,17 3,39 3,90 4,35 5,18 5,64 6,60 7,60 9,11 10,07 17,50 18,13 19,97 28,81 36,50
445558 445619 445671 445749 445800 445862 445930 445992 446081 446173 446210 801231 446296 446333 801316 446395 801354 801392
6 6 6 6 6 6 6 6 6 6 6 6 6 1 1 1 1 1
g
A mm
B mm
L mm
REF.
25 35 50 70 95 120 170 210 250 300 380 460 480 575 600 720 1.275 1.660
15,8 19,4 23 27,5 30,4 33,4 38,7 43,6 46,3 52,7 54,5 60 61,5 65,8 68 74,3 84,4 94,4
17,5 21 25,1 30 32,3 35,9 40,4 48,2 49,6 56,8 59,5 62 65,4 73,6 76 84,1 93,8 102
126 142 157 170 188 202 220 232 250 266 275 302 298 325 328 360 400 450
6490-8
€
g
30,27
6400-6x7 - 1 6400-12x13 - 1 6400-18x19 - 1
781175
1
840
6400-8x9 - 1 6400-10x11 - 1 6400-14x15 - 1 6400-16x17 - 1 6400-20x22 - 1
Set of 8 spanners.
Open end fixed spanner Sets €
REF.
6490-10
43,76
g
781212
1
1.400
6400-6x7 - 1 6400-8x9 - 1 6400-10x11 - 1 6400-12x13 - 1 6400-14x15 - 1 6400-16x17 - 1 6400-18x19 - 1 6400-20x22 - 1 6400-21x23 - 1 6400-24x26 - 1 Set of 10 spanners.
Open end fixed spanner Sets €
REF.
6490-12
63,35
6400-6x7 - 1 6400-12x13 - 1 6400-18x19 - 1 6400-24x26 - 1 Set of 12 spanners.
128
B
g
781250
1
2.240
6400-8x9 - 1 6400-10x11 - 1 6400-14x15 - 1 6400-16x17 - 1 6400-20x22 - 1 6400-21x23 - 1 6400-25x28 - 1 6400-30x32 - 1
Combined spanner 6410 REF.
6410-6 6410-7 6410-8 6410-9 6410-10 6410-11 6410-12 6410-13 6410-14 6410-15 6410-16 6410-17 6410-18 6410-19 6410-20 6410-21 6410-22 6410-24 6410-27 6410-30 6410-32
Combined spanners Sets
€
3,12 3,12 3,21 3,85 3,90 4,26 4,50 4,77 4,86 4,99 5,37 5,73 6,04 6,82 6,97 7,88 8,16 8,98 12,65 15,30 16,53
446456 446524 446586 446647 446715 446777 446838 446890 446968 447026 447088 447187 447248 447316 447392 447446 447484 447583 447705 447910 447866
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
g
A mm
B mm
L mm
REF.
20 25 30 35 40 45 60 75 85 95 115 135 155 165 185 210 215 280 380 490 600
16 16,8 18,8 20,9 22,6 24 25,4 28,1 30,1 32,1 34,2 36 37,5 40,2 41,4 43,2 45,8 50 55 60,1 64
10,6 11,6 12,8 14,4 16 17,2 18,5 20,2 21,2 23 24,4 25 27,5 28,6 30,4 31,8 33 36 39,5 43,5 46,8
100 110 115 125 135 145 155 171 181 185 195 210 220 230 240 245 257 270 300 330 350
6491-8
€
g
46,10
6410-8 - 1 6410-13 - 1 6410-19 - 1
781298
1
850
6410-10 - 1 6410-11 - 1 6410-14 - 1 6410-17 - 1 6410-22 - 1
Set of 8 spanners.
Combined spanners Sets €
REF.
6491-10
51,29
6410-8 - 1 6410-12 - 1 6410-16 - 1 6410-22 - 1
g
781335
1
1.010
6410-10 - 1 6410-11 - 1 6410-13 - 1 6410-14 - 1 6410-17 - 1 6410-19 - 1
Set of 10 spanners.
Combined spanners Sets €
REF.
6491-12
66,75
g
781373
1
1.170
6410-8 - 1 6410-9 - 1 6410-10 - 1 6410-11 - 1 6410-12 - 1 6410-13 - 1 6410-14 - 1 6410-15 - 1 6410-16 - 1 6410-17 - 1 6410-19 - 1 6410-22 - 1 Set of 12 spanners.
129
INDUSTRY
Advantages: • Long-lasting tools. • Optimal torque transmission. • Wide range. Features: • Chrome-Vanadium steel. • High wear resistance. • Polished heads. • Sprayed nickel and chrome matt finish. • Torque strengths over 30% of the current standard. Uses: • For varied torque and adjustment of nuts and bolts.
SPANNERS / OPEN END FIXED, COMBINED, DOUBLE RING END SPANNERS
DOUBLE HEAD SOCKET WRENCHES • Hexagonal body and openings, forged steel heads. • Through-bore in all sizes from 10x11. • Option for using with fixed or adjustable spanner. • Tempered heat treatment.
Combined spanners Sets €
REF.
g
46,10
6491-8 BS 6410-8 - 1 6410-13 - 1 6410-19 - 1
018547
830
1
6410-10 - 1 6410-11 - 1 6410-14 - 1 6410-17 - 1 6410-22 - 1
Bag of 8 spanners.
6491-10 BS
Combined spanners Sets
€
g
51,29
018448
980
1
6410-8 - 1 6410-10 - 1 6410-12 - 1 6410-13 - 1 6410-16 - 1 6410-17 - 1 6410-22 - 1
6410-11 - 1 6410-14 - 1 6410-19 - 1
6420-6x7 6420-8x9 6420-10x11 6420-12x13 6420-14x15 6420-16x17 6420-18x19 6420-20x22 6420-21x23 6420-24x26 6420-25x28 6420-27x29 6420-30x32 6420-32x36 6420-36x41 6420-41x46 6420-46x50
018509
1
€
5,09 5,55 5,95 6,32 6,82 8,20 9,42 10,84 12,21 15,12 17,76 19,59 21,17 30,89 36,90 49,66 59,89
447958 447996 448030 448078 448115 448153 448191 448238 448276 448382 448429 801477 448511 448559 448610 801590 801637
6 6 6 6 6 6 6 6 6 6 6 6 6 1 1 1 1
6410-9 - 1 6410-10 - 1 6410-12 - 1 6410-13 - 1 6410-15 - 1 6410-16 - 1 6410-19 - 1 6410-22 - 1
Spanner sets
g
A mm
B mm
L mm
REF.
55 70 90 115 150 190 235 315 350 450 500 670 680 905 1.190 1.600 1.500
10,5 13,2 16,8 19,5 22,2 24,8 28,2 30,9 32 36,7 37,8 40 43,2 47 53 61 69
11,4 14,5 17,9 20,6 23 26 29,2 31,8 33,8 40,9 42,3 42,5 46,5 53 61 69 75
175 185 198 215 228 246 268 292 315 328 342 370 370 400 440 485 535
6492-8
€
g
58,01
6420-6x7 - 1 6420-12x13 - 1 6420-18x19 - 1
781410
1
B
1.150
Bag of 12 spanners.
Double ring end wrench spanner 6420
A
g
66,75
6491-12 BS 6410-8 - 1 6410-11 - 1 6410-14 - 1 6410-17 - 1
Bag of 10 spanners.
REF.
€
REF.
Double head socket wrenches 6440 €
REF.
6440-6x7 6440-8x9 6440-10x11 6440-12x13 6440-14x15 6440-16x17 6440-18x19 6440-20x22 6440-21x23 6440-24x26 6440-25x28 6440-30x32
6,37 6,47 6,87 8,04 9,06 10,49 12,52 14,25 15,83 16,90 19,49 24,84
449266 449310 449358 449396 449433 449471 449518 449556 449594 449693 449730 449815
6 6 6 6 6 6 6 6 6 6 6 6
Double head socket wrenches Sets g
A mm
B mm
L mm
REF.
45 58 86 145 140 200 240 300 340 400 500 710
10 13 15 18 20 23 25 28 29 33 34 40
11 14 16 19 22 24 26 30 31 35 37 42
105 110 120 140 145 155 165 170 185 190 205 210
6494-6 BS
Double head socket wrenches Sets
1.310
6494-10 BS 6440-6x7 - 1 6440-12x13 - 1 6440-18x19 - 1 6440-24x26 - 1
Set of 8 spanner.
g
106,44
g
6440-6x7 - 1 6440-12x13 - 1
029741
740
1
6440-8x9 - 1 6440-10x11 - 1 6440-14x15 - 1 6440-16x17 - 1
Bag of 6 spanners.
Double head socket wrenches Sets €
REF.
g
73,78
6494-8 BS 6440-6x7 - 1 6440-12x13 - 1 6440-18x19 - 1
029765
1.290
1
6440-8x9 - 1 6440-10x11 - 1 6440-14x15 - 1 6440-16x17 - 1 6440-20x22 - 1
Bag of 8 spanners.
Double head socket wrenches Sets
€
REF.
6420-8x9 - 1 6420-10x11 - 1 6420-14x15 - 1 6420-16x17 - 1 6420-20x22 - 1
€
53,23
021035
2.070
1
€
REF.
6440-8x9 - 1 6440-10x11 - 1 6440-14x15 - 1 6440-16x17 - 1 6440-20x22 - 1 6440-21x23 - 1
Bag of 10 spanners.
6494-12 BS
150,76
6440-6x7- 1 6440-12x13 - 1 6440-18x19 - 1 6440-24x26 - 1
g
148862
3.250
1
6440-8x9 - 1 6440-10x11 - 1 6440-14x15 - 1 6440-16x17 - 1 6440-20x22 - 1 6440-21x23 - 1 6440-25x28 - 1 6440-30x32 - 1
Bag of 12 spanners.
ADJUSTABLE WRENCHES • Thin and longer openings to access difficult places. • The slide does not stick out. Less space required to operate. • Perfectly straight. Fully adjustable. • Double T cross-section handle: robust, strong and ergonomic. • UN 167063 Patent. • Tempered heat treatment.
L Spanner sets €
REF.
58,01
6492-8 BS 6420-6x7 - 1 6420-12x13 - 1 6420-18x19 - 1
A
g
018622
1
1.290
6420-8x9 - 1 6420-10x11 - 1 6420-14x15 - 1 6420-16x17 - 1 6420-20x22 - 1
B
Bag of 8 spanners.
Spanner sets €
REF.
6492-10 BS
85,27
6420-6x7 - 1 6420-12x13 - 1 6420-18x19 - 1 6420-24x26 - 1 Bag of 10 spanners.
130
Adjustable spanner 6460
Spanner sets g
018561
1
2.080
6420-8x9 - 1 6420-10x11 - 1 6420-14x15 - 1 6420-16x17 - 1 6420-20x22 - 1 6420-21x23 - 1
€
REF.
g
REF.
Adjustable spanner 6464
€
13,54 15,77 19,09 25,24 42,48
451504 451542 451580 451627 451665
6420-6x7 - 1 6420-8x9 - 1 6420-10x11 - 1 6420-12x13 - 1 6420-14x15 - 1 6420-16x17 - 1 6420-18x19 - 1 6420-20x22 - 1 6420-21x23 - 1 6420-24x26 - 1 6420-25x28 - 1 6420-30x32 - 1
6460-6 6460-8 6460-10 6460-12 6460-15
Bag of 12 spanners.
Spanners with central adjustment wheel.
6492-12 BS
124,14
018592
1
3.240
6 6 6 6 1
g
A mm
B mm
L mm
REF.
153 254 447 713 1.305
20 25 30 36 45
19,3 24 28,9 36 46
153 204 254 305 381
6464-6 6464-8 6464-10 6464-12 6464-16
€
18,98 21,02 25,14 33,28 52,97
114430 114133 114317 114379 576245
6 6 6 6 1
g
A mm
B mm
L mm
160 340 580 900 1.570
19 26 32 36 45
20 25 29 35 48
150 200 257 300 405
Spanners with side adjustment wheel.
131
INDUSTRY
Combined spanners Sets REF.
L
SPANNERS / ALLEN KEYS
STILLSON WRENCH
ALLEN KEYS
• Blue steel finishing of use and contact areas. • Two versions, standard and monoblock manufactured in aluminium alloy.
• Nickel plated finish. • Chamfered facilitating the key to fit into the screw.
A L A B B
REF.
6450-1.5 N 6450-2 N 6450-2.5 N 6450-3 N 6450-4 N 6450-5 N 6450-6 N 6450-7 N 6450-8 N 6450-9 N 6450-10 N 6450-12 N 6450-14 N
€
0,43 0,45 0,50 0,52 0,63 0,74 0,91 1,13 1,27 1,68 1,82 2,71 3,41
449853 449914 449952 449990 450033 450071 450118 450156 450194 450231 450279 450446 509120
12 12 12 12 12 12 12 12 12 12 12 1 1
Allen and Torx keys sets g
A mm
B mm
1 1 2 4 10 18 30 43 60 81 105 171 263
14 16 18 20 24 28 32 34 36 38 40 45 56
45 50 56 63 70 79 90 95 100 105 112 125 140
REF.
6455-P3
€
28,19
g
618815
6
490
1,5 - 1 2 - 1 2,5 - 1 3 - 1 4 - 1 5-1 6 - 1 8 - 1 5/64” - 1 3/32” - 1 7/64” - 1 1/8” - 1 9/64” - 1 5/32” - 1 3/16” - 1 7/32” - 1 1/4” - 1 T9” - 1 T10 - 1 T15 - 1 T20 - 1 T25 - 1 T27 - 1 T30 - 1 T40 - 1
Stillson wrench 6600 6600-8 6600-10 6600-12 6600-14 6600-18 6600-24 6600-36
Kit of 3 sets with Allen and Torx keys.
Stillson wrench 6601
€
REF.
14,25 18,53 20,51 25,55 35,11 61,62 122,01
967326 967364 967401 967449 967487 967524 967562
6 6 6 6 1 1 1
g
A mm
B mm
L mm
REF.
280 590 790 1.040 1.820 3.080 5.690
27 34 42 49 60 76 102
17 22 25 27 30 38 48
200 250 310 350 450 600 900
6601-10 6601-14 6601-18 6601-24
€
23,26 32,26 44,17 77,65
318630 319088 319170 319262
6 6 1 1
g
A mm
B mm
L mm
400 1.100 1.500 2.550
34 47 60 76
22,5 27 30 38
250 350 450 600
Monoblock handle manufactured in aluminium alloy.
SOCKET SPANNERS
Nickel plated Allen keys.
• Nickel plated and a matt chrome finish. • Fully tempered heat treatment. L A
B Socket 6520 1/2” Allen and Torx keys sets REF.
6455-8 1,5 - 1 3 - 1 6 - 1
Allen and Torx keys sets
€
11,30
g
618976
6
170
2 - 1 2,5 - 1 4 - 1 5-1 8 - 1
Allen and Torx keys sets 6458-9N 6450-1.5 N - 1 6450-3 N - 1 6450-6 N - 1 Set of 9 Allen keys.
132
6457-9P 1,5 - 1 3 - 1 6 - 1
€
14,86
g
507218
6
420
2 - 1 2,5 - 1 4 - 1 5 - 1 8 - 1
Set of 9 Allen keys.
Set of 8 Allen keys.
REF.
REF.
REF.
Allen and Torx keys sets
€
12,73
g
507294
6
6450-2 N - 1 6450-2.5 N - 1 6450-4 N - 1 6450-5 N - 1 6450-8 N - 1 6450-10 N - 1
260
REF.
6459-9TIP T9 - 1 T20 - 1 T30 - 1
€
15,72
g
618976
6
170
T10 - 1 T15 - 1 T25 - 1 T27 - 1 T40 - 1 T50 - 1
6520-10 6520-11 6520-12 6520-13 6520-14 6520-15 6520-16 6520-17 6520-18 6520-19 6520-20 6520-21 6520-22 6520-23 6520-24 6520-25 6520-26 6520-27 6520-28 6520-30 6520-32
Universal joint 6521 1/2”
€
3,21 3,26 3,41 3,61 3,77 3,92 3,97 4,13 4,13 4,33 4,54 4,54 4,69 4,94 5,30 5,40 5,50 5,65 6,05 6,32 6,32
Hexagonal opening.
453010 453058 453096 453133 453171 453218 453256 453294 453331 453379 453416 453454 453492 453539 453591 453638 453676 453713 453775 453867 453911
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
g
A mm
B mm
L mm
56 58 58 58 60 62 66 66 66 66 72 74 86 88 96 106 108 126 140 150 180
23 23 23 23 23 23 23 23 23 23 23 24 24 25 25 26 25 26 27 28 28
15 16 18 19 20 22 23 24 25 26 28 29 30 31 33 34 35 36 38 40 43
40 40 40 40 40 40 40 40 40 40 40 40 40 40 42 42 42 44 44 46 46
REF.
6521
€
15,93
485110
g
A mm
B mm
L mm
1
135
24
12,6
74
g
A mm
B mm
L mm
1 1
180 345
23 23
14 14
125 250
g
A mm
B mm
L mm
1
375
13
24
292
g
A mm
B mm
L mm
1
610
42
39
270
Extension 6523 1/2” REF.
6523-5 6523-10
€
7,33 9,26
485158 485196
Sliding handle 6524 1/2” REF.
6524
€
11,25
485233
Ratchet lever 6528 1/2” REF.
6528
€
32,31
485431
Set of 9 Torx keys.
133
INDUSTRY
Allen keys 6450
HARDWARE TOOLS
SPANNERS / SOCKET SPANNERS
Pliers
Extension 6543 3/4”
€
6540-22 6540-23 6540-24 6540-26 6540-27 6540-28 6540-30 6540-32 6540-36 6540-38 6540-41 6540-42 6540-46 6540-50
8,86 8,86 9,47 9,47 9,82 9,82 11,00 11,25 12,98 14,04 15,47 15,47 18,27 20,82
454871 454932 454963 454994 455038 455069 455090 455137 455168 455199 455236 455267 455298 455335
1 1 1 1 1 1 1 1 1 1 1 1 1 1
g
A mm
B mm
L mm
190 190 200 240 240 260 290 330 430 510 610 570 720 840
35 35 35 36 36 36 37 38 40 41 42 41 44 46
32 34 34 38 39 40 43 45 51 53 57 58 63 69
50 51 52 54 55 56 57 58 61 62 63 64 72 78
REF.
6543-8 6543-16
€
18,01 24,22
485554 485592
g
A mm
B mm
L mm
1 1
520 950
33 33
20 20
200 400
g
A mm
B mm
L mm
1
1.150
18
32
500
Sliding handle 6544 3/4” REF.
6544
€
28,09
485639
INDUSTRY
Socket 6540 3/4” REF.
Advantages: • Guaranteed cutting, holding and clamping. • Fast working. • Ergonomic dual material handle. • Long-lasting tools. • Wide range. Features: • Improved quality carbon steel. Oil tempered and induction treated edges. • High wear resistance. • Polished finish, nickel/chrome plated heads. • Quality rivets and joints. • Special handles design providing effectiveness and comfort. Maximum force transmission, improved clamping power and cutting capacity. • PVC and dual material handles. Uses: • For holding, clamping, cutting, handling, wire stripping.
Hexagonal opening.
UNIVERSAL PLIERS Ratchet wheel 6549 3/4”
Reducer 6546 3/4” €
REF.
6546
13,18
485714
1
g
A mm
B mm
L mm
185
33
12,6
56
REF.
6549
€
81,72
507492
1
g
A mm
B mm
L mm
2.600
64
60
510
• Three different teeth areas. • Combining holding, clamping and cutting in one single tool. - Holding: smooth and refined teeth to hold without marking. - Clamping: thick teeth holding rounded parts and pipes. - Cutting: semi hard and hard materials to a diameter of 2.5 mm. • Temper and blue steel hardening of the head. • Induction tempered edges.
Reductor 3/4’’-1/2’’.
SOCKET SPANNERS SETS
A
B
L Reinforced universal pliers 6100 PVC REF.
€
9,92 442854 6100-160 PVC 6100-180 PVC 10,95 442892 6100-200 PVC 14,46 442946
6 6 6
Reinforced universal pliers 6100 BIM
g
A mm
B mm
C mm
L mm
REF.
250 330 385
25 25,8 29
35 38 40
9 9,6 9,8
164 184 207
6100-160 BIM 6100-180 BIM 6100-200 BIM
PVC handle.
€
12,68 13,94 15,42
g
332797 332926 333022
A mm
B mm
C mm
L mm
35 38 40
9 9,6 9,8
164 184 207
A mm
B mm
C mm
L mm
25 28 27,6
36 37 42
9,7 10 10,4
165 186 207
6 6 6
190 25 230 25,8 290 29
g
6 6 6
210 265 325
Dual material handle.
Socket spanners sets REF.
6592-1/2 H1 6520-8 - 1 6520-11 - 1 6520-14 - 1 6520-17 - 1 66520-21 - 1 6520-24 - 1 6520-28 - 1 6520-32 - 1 6523-10 - 1
134
€
187,90
780611
1
g
A mm
B mm
C mm
4.700
380
255
60
6520-9 - 1 6520-10 - 1 6520-12 - 1 6520-13 - 1 6520-15 - 1 6520-16 - 1 6520-18 - 1 6520-19 - 1 6520-22 - 1 6520-23 - 1 6520-26 - 1 6520-27 - 1 6520-29 - 1 6520-30 - 1 6521 - 1 6523-5 - 1 6524 - 1 6528 - 1
Universal pliers 6102 PVC REF.
6102-180 PVC 11,96
PVC handle.
Universal pliers 6102 BIM
€
442519
6
g
A mm
B mm
C mm
L mm
REF.
265
28
37
10
186
6102-160 BIM 6102-180 BIM 6102-200 BIM
€
12,88 14,25 15,98
333121 333220 333329
Dual material handle.
135
PLIERS / CUTTING PLIERS
CUTTING PLIERS • Temper and blue steel hardening of the head. • Induction tempered edges. Handling pliers 6122 PVC REF.
Handling pliers 6122 BIM
€
6122-200 PVC 14,46
444261
6
g
A mm
B mm
C mm
L mm
REF.
180
17,5
71
2,5
199
6122-200 BIM
Semi-rounded curved openings. PVC handle.
Diagonal cutting pliers 6110 PVC 11,00 12,32
g
443240 443288
A mm
B mm
C mm
L mm
REF.
20 20
10,6 10,3
165 185
6110-160 BIM 6110-180 BIM
225 21,8 280 23,4
6 6
PVC handle.
€
14,76 16,54
g
333527 333626
6 6
A mm
B mm
C mm
L mm
20 20
10,6 10,3
165 185
220 21,8 280 23,4
A mm
B mm
C mm
L mm
17,5
71
2,5
199
Semi-rounded curved openings. Dual material handle.
Handling pliers 6130 PVC
Handling pliers 6130 BIM
€
6130-160 PVC 12,42
444384
6
g
A mm
B mm
C mm
L mm
REF.
160
15,8
33
9,2
160
6130-160 BIM
Flat openings. PVC handle.
Diagonal reinforced cutting pliers 6112 PVC €
6112-180 PVC 6112-200 PVC
g
190
Dual material handle.
REF.
REF.
6
11,65 12,88
g
443516 443554
A mm
334357
6
g
A mm
B mm
C mm
L mm
175
15,8
33
9,2
160
Flat openings. Dual material handle.
Diagonal reinforced cutting pliers 6112 BIM B mm
C mm
L mm
REF.
21 21
10,9 10,7
189 205
6112-180 BIM 6112-200 BIM
240 26,8 270 26,9
6 6
€
15,32
PVC handle.
€
14,46 16,34
g
333725 333909
6 6
A mm
B mm
C mm
L mm
21 21
10,9 10,7
189 205
260 26,8 290 26,9
Dual material handle.
Handling pliers 6134 BIM REF.
6134-160 BIM
Front cutting pliers 6114 PVC 6114-160 PVC
13,74
g
443776
6
A mm
B mm
C mm
L mm
REF.
200 28,5
10,2
26
168
6114-160 BIM
PVC handle.
€
16,28
333954
6
g
A mm B mm C mm D mm L mm
165 15,5
6
34
9,7
3,2
167
Rounded openings. Dual material handle.
Front cutting pliers 6114 BIM
€
REF.
€
16,23 334456
g
A mm
B mm
C mm
L mm
265
28,5
10,2
26
168
Dual material handle.
HANDLING PLIERS • Temper and blue steel hardening of the head. Handling pliers 6142 PVC
Handling pliers 6140 PVC REF.
6140-10 6140-19
€
10,44 11,35
444698 444735
6 6
g
A mm
B mm
L mm
REF.
85 185
41,5 57
1,25 1,7
135 178
6142-10 6142-19
€
10,54 11,86
444858 444896
6 6
g
A mm
B mm
L mm
85 185
26 45
1,25 1,7
125 170
g
A mm
B mm
L mm
85 185 240
28 39 50
0,85 1,7 2,3
126 167 215
Curved opening exterior clips. PVC handle.
Straight opening exterior clips. PVC handle.
B
A
L Handling pliers 6120 PVC REF.
€
6120-160 PVC 12,42 444025 6120-200 PVC 13,54 444063
g
6 6
A mm B mm C mm D mm L mm
140 16,7 180 17,5
Semi-rounded straight openings. PVC handle.
136
Handling pliers 6144 PVC
Handling pliers 6120 BIM 52 76
8,5 8,5
2,5 164 1,7 203
REF.
6120-160 BIM 6120-200 BIM
REF.
€
14,46 334050 16,65 334159
g
6 6
A mm B mm C mm D mm L mm
145 16,7 190 17,5
52 76
Semi-rounded straight openings. Dual material handle.
8,5 8,5
6144-19
Handling pliers 6146 PVC
€
11,15
445022
6
2,5 164 1,7 203 Straight opening interior clips. PVC handle.
g
A mm
B mm
L mm
REF.
185
52
1,7
182
6146-8 6146-19 6146-40
€
9,92 11,50 14,46
445114 462876 445190
6 6 3
Curved opening interior clips. PVC handle.
137
INDUSTRY
6110-160 PVC 6110-180 PVC
334258
Diagonal cutting pliers 6110 BIM
€
REF.
€
17,05
ACCESSORIES
PLIERS AND WIRE CUTTERS / WIRE STRIPPERS
Bench vice
WIRE STRIPPERS
Advantages: • Clamping in safety. • Easy to use. • Long-lasting tools. • Optimising clamping force. Features: • Heat treated milled vices for better grip. • Broad anvil providing a larger working area. • Support on a square guide. • Option for including accessories: Rotating base and jaws. • High strength. Uses: • For holding, gripping and mounting different parts / profiles.
• Temper and blue steel hardening of the head, minimum hardness 45 HRc.
Wire strippers 6150 PVC
Wire strippers 6150 BIM
€
REF.
6150-160 PVC 15,07
445237
6
g
A mm
B mm
C mm
L mm
REF.
150
20
39
9
164
6150-160 BIM
PVC handle.
€
17,56
334555
6
g
A mm
B mm
C mm
L mm
165
20
39
9
164
Dual material handle.
MULTI-OPENING PLIERS
INDUSTRY
• Temper and blue steel hardening of the head, minimum hardness 45 HRc.
A Multi-opening rack 6160 PVC €
REF.
Multi-opening box 6162 PVC g
6160-250 PVC 12,68 445367
6
350
A mm B mm C mm D mm L mm
34
48
9
43
252
PVC handle.
REF.
€
g
6162-250 PVC 18,38 445442
6
290
37
8
33
E
B
A mm B mm C mm D mm L mm
34
C
245
PVC handle.
Bench vice 6700 REF.
6700-100 6700-125 6700-150 6700-175
LOCKING PLIERS
Bench vice 6710
€
g
159,41 225,80 291,34 389,43
026313 026337 019872 019858
1 1 1 1
7.000 11.000 17.000 26.000
A mm B mm C mm D mm E mm
REF.
100 125 150 175
6710-80 6710-100 6710-125 6710-150
125 148 178 208
125 60 150 70 200 90 220 105
52 62 75 95
Locking plier 6167 BC 6167-180 BC 6167-250 BC
11,86 623925 13,84 623949
3 3
g
A mm
L mm
MAX mm
340 520
55 65
180 250
38 47
REF.
6167-180 BR 6167-250 BR
€
g
11,86 623963 13,84 623987
3 3
370 530
A mm L mm
55 65
180 250
75 65 5.400 75 115 75 66 6.300 100 123 11.600 125 151 100 90 20.000 150 174 125 115
46 54 65 77
33 44
Straight jaw.
Rotating base 6701 REF.
Accessories
6701-100 6701-125 6701-150 6701-175
Metal Boxes 6900-6902
Riveter 6170 €
15,98
340778
6
g
A mm
B mm
C mm
REF.
710
78
65
250
6900-400 6900-500 6902-500
Includes: accessories for 2.2 mm, 2.4 mm, 4 mm and 4.8 mm rivets, plus assembly spanner.
138
1 1 1 1
MAX mm
ACCESSORIES
6170
A mm B mm C mm D mm E mm
g
365375 353419 353457 353488
Locking plier 6167 BR
€
Curved jaw.
REF.
€
51,19 72,30 93,88 121,91
Cast bench vice.
Forged bench vice.
REF.
D
€
28,14 30,53 53,78
057133 057140 057157
1 1 1
g
A mm
B mm
C mm
3.500 4.000 5.500
400 500 500
200 200 200
180 180 230
Rotating base 6711
€
38,73 59,23 68,38 88,84
g
1 1 1 1
035599 035605 035612 035629
800 1.250 2.000 2.800
6700-100 6700-125 6700-150 6700-175
Clamps 6702 REF.
6702-100 6702-125 6702-150 6702-175
6711-80 6711-100 6711-125 6711-150
23,71 36,28 41,83 54,29
g
365436 353549 353570 353600
1 1 1 1
700 700 1.450 2.100
365481 353686 353730 353785
2 2 2 2
200 310 460 900
6710-80 6710-100 6710-125 6710-150
Clamps 6712
€
22,80 22,80 26,87 26,87
€
REF.
g
035636 035643 035650 035667
1 1 1 1
310 460 900 960
REF.
12-55 12-75 17-90 17-120
6700-100 6700-125 6700-150 6700-175
6712-80 6712-100 6712-125 6712-150
€
13,94 13,94 16,54 16,54
g
6710-80 6710-100 6710-125 6710-150
139