Bellota industry catalogue pounds by Bellota

INDUSTRY

FILES AND RASPS

Files and rasps

Half rounded 4003 REF.

4003-4 BAS. 4003-4 ENT. 4003-4 FIN. 4003-6 BAS. 4003-6 ENT. 4003-6 FIN. 4003-8 BAS. 4003-8 ENT. 4003-8 FIN. 4003-10 BAS. 4003-10 ENT. 4003-10 FIN. 4003-12 BAS. 4003-12 ENT. 4003-12 FIN. 4003-14 BAS. 4003-14 ENT.

M: Reference of the suitable handle for the file.

MECHANICAL FILES • Special chrome alloy forged steel. • Double treatment: globular hardening and complete tempering. • Perfectly straight. • Flat pointed, parallel flat, half rounded, rounded, triangular, square, flat thin, knife rasps. • Option to put a dual material handle.

Rounded 4004 g

A mm

B mm

5,78 408102

100

8,9-10,6

4089-2 / 4090-2 / 4093-B4

150

12,7-15

4089-4 / 4090-3 / 4093-B3

123

200 14,8-19,8

230

250

385

300 19,5-28,5 4090-6 / 4093-A2

586

350

23-33,2

4090-6 / 4093-A1

A mm

B mm

6,10 408300 12 6,37 408508 6,37 408706 6,65 408904 12 6,93 409307 7,41 409505 7,92 409703 12 8,43 410105

4089-7 / 4090-4 / 4093-A4

10,41 410303 10,81 410501 12

19-24

4090-5 / 4093-A3

11,45 410709 13,50 410907 14,02 411102 15,13 411300 16,59 411508 17,51 411706

Triangular 4005 REF.

Parallel flat 4002

Flat pointed 4001 REF.

4001-4 BAS. 4001-4 ENT. 4001-4 FIN. 4001-6 BAS. 4001-6 ENT. 4001-6 FIN. 4001-8 BAS. 4001-8 ENT. 4001-8 FIN. 4001-10 BAS. 4001-10 ENT. 4001-10 FIN. 4001-12 BAS. 4001-12 ENT. 4001-12 FIN. 4001-14 BAS. 4001-14 ENT. 4001-14 FIN.

116

A mm

B mm

3,80 400106 3,96 400304 12 4,23 400502

100

7,9-11,2

4089-2 / 4090-2 / 4093-B4

150 10,5-15,1

4089-4 / 4090-3 / 4093-B3

4,35 400700 4,56 400908 12 4,91 401301 5,63 401509 5,86 401707 12

150

200 13,3-19,2

6,25 402100

4089-7 / 4090-4 4093-A4

7,68 402308 8,15 402506 12

271

250

16-24,4

4090-5 / 4093-A2

8,63 402704 10,29 402902 10,74 403107 11,48 403305

463

300

19-29

4090-6 / 4093-A2

12,47 403503 13,14 403701 13,94 403909

720

350

22,5-34

4090-6 / 4093-A1

REF.

4002-4 BAS. 4002-4 ENT. 4002-4 FIN. 4002-6 BAS. 4002-6 ENT. 4002-6 FIN. 4002-8 BAS. 4002-8 ENT. 4002-8 FIN. 4002-10 BAS. 4002-10 ENT. 4002-10 FIN. 4002-12 BAS. 4002-12 ENT. 4002-12 FIN. 4002-14 BAS. 4002-14 ENT.

A mm

B mm

3,80 404203 3,96 404401 12 4,11 404609

100

11,2

4089-2 / 4090-2 / 4093-B4

150

15,1

4089-4 / 4090-3 / 4093-B3

156

200

19,2

4089-7 / 4090-4 / 4093-A4

279

250

24,4

4090-5 / 4093-A2

4,35 404807 4,56 405002 12 4,91 405200 5,63 405606 5,86 405804 12

6,25 406009

4005-4 BAS. 4005-4 ENT. 4005-4 FIN. 4005-6 BAS. 4005-6 ENT. 4005-6 FIN. 4005-8 BAS. 4005-8 ENT. 4005-8 FIN. 4005-10 BAS. 4005-10 ENT. 4005-10 FIN. 4005-12 BAS. 4005-12 ENT. 4005-12 FIN.

REF.

A mm

B mm

100

2-3,8

4089-1 / 4090-1 / 4093-B5

150

3,5-5,8

4089-2 / 4090-2 / 4093-B4

200

5-7,5

4089-3 / 4090-3 / 4093-B4

143

250

6-9,4

4089-4 / 4090-4 / 4093-B3

278

300

7-11,4

4089-4 / 4090-4 / 4093-B3

A mm

B mm

100

1,6-3,8

4089-1 / 4090-1 / 4093-B5

150

2,9-5,4

4089-2 / 4090-2 / 4093-B4

200

4,5-7,1

4089-3 / 4090-3 / 4093-B4

180

250

5,6-9

4089-4 / 4090-4 / 4093-B3

313

300

6,6-11,6

4089-4 / 4090-4 / 4093-B2

4004-4 BAS. 3,45 4004-4 ENT. 3,61 4004-4 FIN. 3,76 4004-6 BAS. 4,35 4004-6 ENT. 4,51 4004-6 FIN. 4,68 4004-8 BAS. 5,15 4004-8 ENT. 5,30 4004-8 FIN. 5,75 4004-10 BAS. 6,93 4004-10 ENT. 7,29 4004-10 FIN. 7,72 4004-12 BAS. 8,95 4004-12 ENT. 9,50 4004-12 FIN. 10,05

412109 412307 412505 413304 413502 413908 414103 414301 414707 414905 415100 415308 415506 415704 415902

INDUSTRY

Advantages: • Fast working. • Long-lasting tools. • Wide range. Features: • Improved quality carbon steel. • Hardening treatment. • High hardness. • Wooden plastic and bimaterial handles (ergonomics). • High wear resistance. Uses: • For regrinding, filing, rasping and finishing jobs.

Square 4006

3,68 416800 3,80 417005 12

100

5,5-8,5

4089-2 / 4090-1 / 4093-B4

150

8-12,5

4089-3 / 4090-3 / 4093-B3

4,08 417203 4,95 418002 5,27 418200 12 5,63 418606 6,22 418903 6,58 419108 12

200 10,5-15,6

285

250

450

300 12,5-20,6 4090-6 / 4093-B1

7,01 419405 8,95 419603 9,55 419801 12

4089-4 / 4090-4 / 4093-B2

160

11-17,8

10,22 420005

4089-7 / 4090-5 / 4093-B1

12,07 420203 12,71 420401 13,54 420609

REF.

4006-4 BAS. 4,44 422009 4006-4 ENT. 4,51 422207 4006-4 FIN. 4,63 422405 4006-6 BAS. 4,99 423204 4006-6 ENT. 5,15 423402 4006-6 FIN. 5,51 423600 4006-8 BAS. 5,75 423907 4006-8 ENT. 5,94 424102 4006-8 FIN. 6,37 424300 4006-10 BAS. 7,56 424508 4006-10 ENT. 8,15 424706 4006-12 BAS. 10,22 425109 4006-12 ENT. 10,65 425307 4006-12 FIN. 11,40 425505

7,68 406207 8,15 406405 12 8,63 406603

Flat thin 4007

10,29 406801 10,74 407006 11,48 407204 12,47 407402 13,14 407600

476

300

4090-6 / 4093-A2

750

350

4090-6 / 4093-A1

REF.

4007-6 BAS. 4007-6 ENT. 4007-6 FIN.

Knife 4008 g

5,78 5,94 6,18

426908 427103 12 427301

A mm

150

B mm

1,8-15,6

4089-4 / 4090-3 / 4093-B3

REF.

A mm

B mm

4008-6 BAS. 4008-6 ENT. 4008-6 FIN.

7,92

429107 429305 12 429503

150

10-16,6

4089-4 / 4090-3 / 4093-B3

4008-8 ENT.

10,26 430004 12

200

12,5-21

4089-7 / 4090-4 / 4093-A4

4008-10 BAS. 12,64 430400 12 4008-10 ENT. 13,31 430608

122

250

15-26

4089-7 / 4090-5 / 4093-A3

8,43 8,95

117

FILES AND RASPS / SHARPENING FILES

SHARPENING FILES

NEEDLE FILES

• Specially for sharpening all types of agricultural tools: machetes, hoes, etc. • Extra thin, thin, normal, rounded and triangular files.

Extra thin 4040 REF.

• For use by watchmakers, jewellery makers, engravers. • Flat pointed, rounded, half rounded, triangular, flat parallel files.

Thin 4041 g

A mm

B mm

4,68

431605 12

125

3,5-6,1

4040-6

4,91

431803 12

150

4-6,9

4089-1 / 4090-2 / 4093-B5 4089-2 / 4090-3 / 4093-B4

REF.

A mm

4041-4

3,73

432305 12

100

4041-5

3,80

432701

125

4041-6

4,23

432909 12

150

4041-7

4,68

433104 12

175

4041-8

5,63

433302 12 103

200

B mm

4089-1 / 4090-1 / 3,1-5,5 4093-B5 4089-2 / 4090-2 / 4-7 4093-B5 4089-2 / 4090-3 / 5,1-9,1 4093-B3 4089-3 / 4090-4 / 5,9-10,4 4093-B3 4089-3 / 4090-4 / 6,7-12,2 4093-B2

Flat pointed 4071 REF.

Rounded 4072

4071-16 BAS. 4071-16 ENT. 4071-16 FIN.

4,47 4,47 4,47

444506 444902 445107

12 12 12

A mm

B mm

REF.

8 8 8

160 160 160

5,96 5,96 5,96

4072-16 BAS. 4072-16 ENT. 4072-16 FIN.

A mm

B mm

REF.

A mm

B mm

445305 445701 445909

12 12 12

9 9 9

160 160 160

2,92 2,92 2,92

A mm

B mm

447903 448306 448504

12 12 12

9 9 9

160 160 160

3,5 3,5 3,5

3,76 3,76 3,76

INDUSTRY

4040-5

REF.

A mm

4042-3 V

3,40

433609 12

4042-4 V

3,45

434002 12

100

4042-5 V

3,88

434606 12

125

4042-6 V

4,56

435009 12

150

4042-7 V

5,30

435405 12

114

175

4042-8 V

5,90

435801 12

158

200

4042-9 V

6,93

436204 12

222

225

4042-10 V

7,77

Half rounded 4074

Rounded 4050 for power saws

Normal 4042

436501 12

291

250

B mm

4089-1 / 4090-1 / 4093-B5 4089-2 / 4090-1 / 5,5-7,9 4093-B4 4089-3 / 4090-2 / 6,5-10,4 4093-B3 4089-3 / 4090-3 / 9-11,3 4093-B3 4089-3 / 4090-4 / 9-13,1 4093-B3 4089-4 / 4090-4 / 10-15 4093-B2 4089-4 / 4090-5 / 10-16,5 4093-B2 4089-7 / 4090-5 / 11-17,3 4093-B1 3,5-6,1

REF.

A mm

B mm

442601 12

200

3,98

M4093-B4

4050-8x4,0 BS 3,40

612059

200

3,98

M4093-B4

4050-8x4,5

469363 12

200

4,5

M4093-B4

4050-8x4,5 BS 3,40

612073

200

4,5

M4093-B4

4050-8x4,8

442502 12

200

4,76

M4093-B4

4050-8x4,8 BS 3,40

612097

200

4,76

M4093-B4

4050-8x5,5

442700 12

200

5,55

M4093-B4

REF.

M4093-B4

4076-16 BAS. 4076-16 ENT. 4076-16 FIN.

REF.

4050-8x4,0

1,56

4050-8x5,5 BS 3,40

612110

200

5,55

BS: bag with two files.

Triangular 4075

4074-16 BAS. 4074-16 ENT. 4074-16 FIN.

7,29 7,29 7,29

446906 447309 447507

12 12 12

9 9 9

160 160 160

5,5 5,5 5,5

A mm

B mm

448702 449105 449303

12 12 12

9 9 9

160 160 160

6 6 6

4075-16 BAS. 4075-16 ENT. 4075-16 FIN.

4,23 4,23 4,23

Parallel flat 4076 £

4,47 4,47 4,47

Flat with handle 4082 REF.

4082-8 4082-10

Triangular 4081 REF.

A mm

B mm

4081-5

3,33

466607 12

125

6,5-10,6

4081-6

3,76

466706 12

150

9-11,5

466805 12

4081-7

4,51

175

9-13,3

4081-8

5,51 466904 12 160 200

10-15,2

4081-10

118

7,25

115

469233 12 260 250

11-17

4089-3 / 4090-2 / 4093-B3 4089-4 / 4090-3 / 4093-B3 4089-4 / 4090-4 / 4093-B3 4089-4 / 4090-4 / 4093-B2 4089-7 / 4090-5 / 4093-B1

4082-6 467000 467154 467208

12 12 6

A mm

B mm

120 190 417

150 200 250

20 25 29

For sharpening hoes and machetes. Note: orders have a minimum quantity requirement.

Needle file Kits REF.

4077-16

Triangular parallel 4087 REF.

4087-6

7702956019893 12

ABmm mmB mm

150

4089-4 / 4090-3/ 4093-B3

For sharpening machetes. Note: orders have a minimum quantity requirement.

Needle file Kits

55,68

4071-16 BAS - 1 4072-16 FIN - 1 4074-16 BAS - 1 4075-16 FIN - 1

466201

A mm

B mm

C mm

150

170

4071-16 FIN - 1 4073-16 BAS - 1 4074-16 FIN - 1 4076-16 BAS - 1

Box of assorted 12 fine and medium files.

4072-16 BAS - 1 4073-16 FIN - 1 4075-16 BAS - 1 4076-16 FIN - 1

REF.

4078-16

27,87

4071-16 BAS - 1 4072-16 FIN - 1 4074-16 BAS - 1 4075-16 FIN - 1

466300

4071-16 FIN - 1 4073-16 BAS - 1 4074-16 FIN - 1 4076-16 BAS - 1

A mm

B mm

C mm

190

120

4072-16 BAS - 1 4073-16 FIN - 1 4075-16 BAS - 1 4076-16 FIN - 1

Bag of assorted 6 needle files.

119

FILES AND RASPS / CARPENTER´S RASPS

CARPENTER’S RASPS

FILES WITH BIMATERIAL HANDLE

• For work in wooden joinery. • Half rounded carpentry, half rounded woodworking, flat pointed and rounded.

4101-6 BAS. 4101-6 ENT. 4101-6 FIN. 4101-8 BAS. 4101-8 ENT. 4101-8 FIN. 4101-10 BAS. 4101-10 ENT. 4101-10 FIN. 4101-12 BAS. 4101-12 ENT. 4101-12 FIN.

9,15 9,43 9,74 10,17 11,05 13,02 12,00 13,90 16,44 14,37 16,23 19,08

453805 454000 12 454208 454406 454604 12 454802 455007 455205 12 455403 455601 455809 6 456004

119

229

375

Half rounded woodworking rasp 4102

A mm

B mm

300

4089-4 / 4090-4 / 4093-A4

19,5

456400 12

4102-8 BAS. 9,98 457001 12 4102-8 ENT. 10,81 457209 4102-10 BAS. 12,00 457803 12 4102-10 ENT. 13,07 458008

B mm

150

121

200

210

250

4089-4 / 4090-3 / 4093-B3 4089-4 / 4090-4 / 4093-A4 4089-7 / 4090-5 / 4093-A3

11,05 459708 12

154

A mm

REF.

B mm

4089-7 / 4090-4 / 4093-A4

200

4104-6 BAS. 4104-6 ENT.

4,80 461008

A mm

B mm

150

4104-8 ENT.

7,13 462005 12

200

4104-10 BAS. 4104-10 ENT.

8,04 462609

143

250

5,30 461206

8,87 462807

Rasp 4132

Rasp 4135 g

20,08 30,53

186673 014181

6 6

ABmm mmB mm

622 354 622 354

44 44

REF.

4090-7/4090-7NG 4090-7/4090-7NG

SHR: special re-sharpening.

Rasp 4131 708944122146

A mm B mm

4135-14 FINISH

ABmm mmB mm

655579199183

6 624 425

618 427

708944122252

REF.

4090-7/4090-7NG

Extreme cut. Coarse file side.

4090-7/4090-7NG

4134-14 RAPTOR

ABmm mmB mm

827 427

100

7,9-11,2

100

7,9-11,2

5,18 097818

5,42 093650

5,78 093865

125

150 10,5-15,1

6,13 093759 6,73 098051

125

150 10,5-15,1

125

150 10,5-15,1

6,77 098242

220

200 13,3-19,2

7,32 098549 7,53 098679

220

200 13,3-19,2

220

200 13,3-19,2

9,27 131666

353

250

16-24,4

9,39 099171

353

250

16-24,4

9,98 099294

353

250

16-24,4

4093-B4 4093-B4 4093-B3 4093-B3 4093-B3 4093-A4 4093-A4 4093-A4 4093-A2 4093-A2 4093-A2

A mm

B mm

REF.

4002-4 BAS. MB 4002-4 ENT. MB 4002-6 BAS. MB 4002-6 ENT. MB 4002-6 FIN. MB 4002-8 BAS. MB 4002-8 ENT. MB 4002-8 FIN. MB 4002-10 BAS.MB 4002-10 ENT. MB 4002-10 FIN. MB

A mm

B mm

100

11,2

100

11,2

130

150

15,1

5,78 120585

130

150

15,1

6,13 131741

130

150

15,1

6,77 131819

223

200

19,2

7,20 131871 7,53 131932

223

200

19,2

223

200

19,2

9,07 109900 9,39 109962

392

250

24,4

392

250

24,4

9,98 132045

392

250

24,4

4093-B4 4093-B4 4093-B3 4093-B3 4093-B3 4093-A4 4093-A4 4093-A4 4093-A2 4093-A2 4093-A2

A mm

B mm

4,75 133769

100

2-3,8

4,87 133820

100

2-3,8

4,91 133868

100

2-3,8

5,63 133929

150

3,5-5,8

5,78 133998 5,94 134070

150

3,5-5,8

150

3,5-5,8

6,42 134124

135

200

5-7,5

6,53 134193

135

200

5-7,5

6,89 134278

135

200

5-7,5

8,36 134346

203

250

6-9,4

8,55 134414

203

250

6-9,4

9,07 134476

203

250

6-9,4

4093-B5 4093-B5 4093-B5 4093-B4 4093-B4 4093-B4 4093-B4 4093-B4 4093-B4 4093-B3 4093-B3 4093-B3

A mm

B mm

100

1,6-3,8

100

1,6-3,8

100

1,6-3,8

150

2,9-5,4

150

2,9-5,4

150

2,9-5,4

140

200

4,5-7,1

140

200

4,5-7,1

140

200

4,5-7,1

243

250

5,6-9

243

250

5,6-9

243

250

5,6-9

4093-B5 4093-B5 4093-B5 4093-B4 4093-B4 4093-B4 4093-B4 4093-B4 4093-B4 4093-B3 4093-B3 4093-B3

5,27 109986

5,30 110043 5,70 111064

4003-4 BAS. MB 4003-4 ENT. MB 4003-4 FIN. MB 4003-6 BAS. MB 4003-6 ENT. MB 4003-6 FIN. MB 4003-8 BAS. MB 4003-8 ENT. MB 4003-8 FIN. MB 4003-10 BAS.MB 4003-10 ENT. MB 4003-10 FIN. MB

Rounded 4004 MB

7,13 132465

100

8,9-10,6

7,41 132526

100

8,9-10,6

7,53 132588

100

8,9-10,6

7,60 132656

103

150

12,7-15

8,39 132724 8,55 132786

103

150

12,7-15

103

150

12,7-15

8,99 132847

173

200 14,8-19,8

10,10 132915

173

200 14,8-19,8

10,38 132977

173

200 14,8-19,8

11,84 133042

283

250

19-24

12,28 133110

283

250

19-24

12,79 133172

283

250

19-24

4093-B4 4093-B4 4093-B4 4093-B3 4093-B3 4093-B3 4093-A4 4093-A4 4093-A4 4093-A3 4093-A3 4093-A3

A mm

B mm

100

5,5-8,5

127

150

8-12,5

127

150

8-12,5

127

150

8-12,5

225

200 10,5-15,6

225

200 10,5-15,6

225

200 10,5-15,6

357

250

11-17,8

357

250

11-17,8

357

250

11-17,8

4093-B4 4093-B3 4093-B3 4093-B3 4093-B2 4093-B2 4093-B2 4093-B1 4093-B1 4093-B1

REF.

4004-4 BAS. MB 4004-4 ENT. MB 4004-4 FIN. MB 4004-6 BAS. MB 4004-6 ENT. MB 4004-6 FIN. MB 4004-8 BAS. MB 4004-8 ENT. MB 4004-8 FIN. MB 4004-10 BAS.MB 4004-10 ENT. MB 4004-10 FIN. MB

4090-7/4090-7NG

Extra width: greater cutting surface. Coarse file side.

Rasp 4133

Hammer 8027 £

23,45 24,79

1/2 file. Two-handed.

464924 464931

6 6

A mm

B mm

593 678

356 406

44 44

REF.

8027

B mm g A mm B mm C mm

23,60

Horseshoeing hammer.

144604

170

Triangular 4005 MB REF.

120

Rasp 4134 g

4131-34 RAZOR

4133-14 4133-16

B mm

For finishing.

REF.

A mm

Half rounded 4003 MB REF.

• Especially recommended for shoeing horses. • Maximum accuracy and a perfect finish guaranteed. • Blacksmith file with 1/2 shaft rapid finish, fine finish, 2-handed and two sided rasping.

4132-14 SHDA 4132-14 SHR

4001-4 BAS. MB 4001-4 ENT. MB 4001-6 BAS. MB 4001-6 ENT. MB 4001-6 FIN. MB 4001-8 BAS. MB 4001-8 ENT. MB 4001-8 FIN. MB 4001-10 BAS.MB 4001-10 ENT. MB 4001-10 FIN. MB

Parallel flat 4002 MB g

4089-2 / 4090-2 / 4093-B4 4089-3 / 4090-3 / 4093-B4 4089-4 / 4090-5 / 4093-B3

HORSESHOEING LINE

REF.

Flat pointed 4001 MB REF.

Rounded 4104

£41

4103-8 ENT

9,19

A mm

4090-6 / 4093-A2

28,5

Flat pointed 4103 REF.

4102-6 ENT.

4089-7 / 4090-5 / 4093-A3

250

REF.

4089-4 / 4090-3 / 4093-B3

150

200

305

111

15,5

Square 4006 MB

5,07 134728 4005-4 ENT. MB 4005-6 BAS. MB 6,22 134797 4005-6 ENT. MB 6,53 134872 4005-6 FIN. MB 6,77 134940 4005-8 BAS. MB 7,53 135015 4005-8 ENT. MB 7,84 135077 4005-8 FIN. MB 8,36 135145 4005-10 BAS.MB 10,29 135282 4005-10 ENT. MB 10,74 135350 4005-10 FIN. MB 11,45 135428

REF.

4006-4 BAS. MB 5,78 4006-4 ENT. MB 5,82 4006-4 FIN. MB 5,90 4006-6 BAS. MB 6,53 4006-6 ENT. MB 6,58 4006-6 FIN. MB 6,77 4006-8 BAS. MB 7,41 4006-8 ENT. MB 7,60 4006-8 FIN. MB 7,65 4006-10 BAS.MB 8,99 4006-10 ENT. MB 9,39 4006-10 FIN. MB 10,10

135688 135756 135824 135848 135916 136081 135978 136043 136234 136296 136357 136425

121

INDUSTRY

Half rounded carpentry rasp 4101 REF.

FILES AND RASPS / FILES WITH BIMATERIAL HANDLE

EXHIBITORS AND FILE SETS

Normal saw 4042 MB REF.

4042-3 V MB 4042-4 V MB 4042-5 V MB 4042-6 V MB 4042-7 V MB 4042-8 V MB

Saw 4045 MB g

4,59 4,59 5,23 5,78 6,53 7,25

136944 137262 137019 130973 136692 136760

A mm

B mm

3,5-6,1

4093-B5 4093-B4 4093-B3 4093-B3 4093-B3 4093-B2

100

5,5-7,9

125

6,5-10,4

113

150

9-11,3

173

175

9-13,1

220

200

10-15

4045-6 1CR MB 4045-8 1CR MB

A mm

B mm

150

167

200

4093-B3 4093-A4

8,55 9,98

137330 137392

Parallel flat one rounded edge.

INDUSTRY

Triangular.

REF.

Small Stand REF.

RASPS WITH BIMATERIAL HANDLE

4450

Large Stand B mm g A mm B mm C mm

679,57

4001-6 ENT MB - 6 4003-8 ENT MB - 6 4005-6 ENT MB - 6 4102-8 ENT MB - 6 4104-8 ENT MB - 6

Rasp 4101 MB REF.

4101-6 BAS. MB 4101-6 ENT. MB 4101-8 BAS. MB 4101-8 ENT. MB 4101-10 BAS MB 4101-10 ENT MB

A mm

B mm

150

4093-B3 4093-B3 4093-A4 4093-A4 4093-A3 4093-A3

10,41 136487

107

10,65 137583

107

150

11,72 137637

177

200

19,5

12,75 137699 13,35 137767

177

200

19,5

290

250

15,09 137835

290

250

Flat pointed.

122

4001-8 ENT MB - 6 4004-6 ENT MB - 6 4005-8 ENT MB - 6 4103-8 ENT MB - 6

210

560

4003-6 ENT MB - 6 4004-8 ENT MB - 6 4102-6 ENT MB - 6 4104-6 ENT MB - 6

4452

B mm g A mm B mm C mm

1605,00

4001-4 BMB - 6 4001-10 BMB - 6 4001-8 EMB - 6 4003-6 BMB - 6 4003-4 EMB - 6 4003-10 EMB - 6 4004-4 EMB - 6 4042-4 V MB - 6 4042-7 V MB - 6 4101-8 EMB - 6 4104-8 EMB - 6

414479

1 53.000 1.750 410

4001-6 BMB - 6 4001-4 EMB - 6 4001-10 EMB - 6 4003-8 BMB - 6 4003-6 EMB - 6 4004-6 BMB - 6 4004-6 EMB - 6 4042-5 V MB - 6 4042-8 V MB - 6 4101-10 EMB - 6 4104-10 EMB - 6

370

4001-8 BMB - 6 4001-6 EMB - 6 4003-4 BMB - 6 4003-10 BMB - 6 4003-8 EMB -6 4004-8 BMB - 6 4004-8 EMB - 6 4042-6 V MB - 6 4101-6 EMB - 6 4104-6 EMB - 6

REF.

4102-6 BAS. MB 4102-6 ENT. MB 4102-8 BAS. MB 4102-8 ENT. MB 4102-10 BAS MB 4102-10 ENT MB

A mm

B mm

123

150

4093-B3 4093-B3 4093-A4 4093-A4 4093-A3 4093-A3

A mm

B mm

150

6 6

4093-B4 4093-B4 4093-B4 4093-B3 4093-B3

10,53 138023

10,74 138085 11,57 138146

123

150

192

200

12,79 138214 13,19 138276

192

200

300

250

14,18 138337

300

250

Half rounded woodworking rasp.

Rasp 4103 MB 4103-8 ENT. MB

1 14.700 700

Rasp 4102 MB £

Half rounded carpentry rasp.

REF.

466409

REF.

File Kits

Rasp 4104 MB £

12,36 086133

A mm

B mm

237

200

4093-A4

REF.

4104-6 BAS. MB 6,37 4104-6 ENT. MB 6,93 4104-8 ENT. MB 8,36 4104-10 BAS MB 9,31 4104-10 ENT MB 10,10

138436 138498 138610 138658 138702

150

138

200

250

200

250

REF.

4096 4001-8 EMB - 1

23,95

610079

4003-8 EMB - 1

A mm

B mm

C mm

540

440

140

4004-8 EMB - 1

Rounded.

123

HARDWARE TOOLS

Screwdrivers

Philips screwdriver 66220 REF.

66220-PH0 66220-PH1 66220-PH2 66220-PH3

Pozidriv screwdriver 66230

2,43 3,02 3,71 5,74

149814 149869 149920 149982

6 6 6 6

A mm

B mm

L mm

REF.

31 70 86 153

75 100 125 150

3 4,5 6 8

160 200 235 270

66230-PZ0 66230-PZ1 66230-PZ2 66230-PZ3

A mm

B mm

L mm

REF.

30 30 30 31 31 39 39 74 110 121 128

85 85 85 85 85 85 85 100 100 110 120

3 3 3 3 3 3,5 4 4,5 5,5 6 7

145 145 145 145 165 165 185 200 215 225 250

66281

A mm

B mm

C mm

470

165

312

150261 150315 150391 150452

2,89 3,28 4,01 6,00

A mm

B mm

L mm

6 6 6 6

31 70 87 151

75 100 125 150

3 4,5 6 8

160 200 235 270

A mm

B mm

C mm

11.355

600

500

280

INDUSTRY

Advantages: • Excellent performance. • Ergonomic handles. • Long-lasting tools. • Wide range. • Unequal tightening torque intensity. Features: • Heat treatment and fully tempered shaft. • Accurate shape. • High wear resistance. • Geometry of the socket to guaranteeing optimal connection preventing the shaft from turning in the handle. • Flathead, die cut, Phillips, Pozidriv and Torx heads. • Complies with standards: ISO 2380, ISO 8764, Camcar-Textron Standards. Uses: • For jobs involving tightening and removing screws.

TRIMAX SCREWDRIVERS • Trilobular shape matching the natural movement of the hand allowing 120o rotation. • Chrome-Molybdenum-Vanadium steel rod. • Matt chrome finish on the rod and tip: maximum corrosion protection. Torx screwdriver 66240 REF.

66240-T6 66240-T7 66240-T8 66240-T9 66240-T10 66240-T15 66240-T20 66240-T25 66240-T27 66240-T30 66240-T40

TRIMAX screwdriver Stand

3,41 3,36 3,36 3,24 3,15 3,32 3,36 3,93 3,93 4,70 5,69

150568 150629 150674 150735 150780 150841 150896 150957 151015 151060 151121

6 6 6 6 6 6 6 6 6 6 6

057706

301,89

66200-3X100 - 6 66210-4X100 - 6 66210-8X175 - 6 66220-PH2 - 6 66240-T10 - 6

66200-4X125 - 6 66210-5,5X125 - 6 66220-PH0 - 6 66230-PZ1 - 6 66240-T20 - 6

66200-5,5X150 - 6 66210-6,5X150 - 6 66220-PH1 - 6 66230-PZ2 - 6 66240-T25 - 6

L A B

Flat headed screwdriver 66200 REF.

66200-3x75 66200-3x100 66200-3.5x100 66200-4x100 66200-4x125 66200-5.5x125 66200-5.5x150 66200-6.5x150

124

1,99 2,13 2,21 2,55 2,56 3,19 3,62 4,31

148367 148169 148534 148695 148848 148893 148947 148992

6 6 6 6 6 6 6 6

Die cut screwdriver 66210 g

A mm

B mm

C mm

L mm

REF.

31 32 35 38 41 77 83 98

75 100 100 100 125 125 150 150

3 3 3,5 4 4 5,5 5,5 6,5

0,5 0,5 0,6 0,8 0,8 1 1 1,2

160 185 185 185 210 210 250 260

66210-4x100 66210-5.5x100 66210-5.5x125 66210-6.5x125 66210-6.5x150 66210-8x175 66210-10x200 66210-12x250

2,48 3,11 3,19 4,01 4,49 5,18 6,64 8,58

149319 149364 149425 149470 149531 149647 149692 149753

6 6 6 6 6 6 6 6

A mm

B mm

C mm

L mm

38 70 74 86 91 142 175 225

100 100 125 125 150 175 200 250

4 5,5 5,5 6,5 6,5 8 10 12

0,8 1 1 1,2 1,2 1,2 1,6 2

185 200 225 235 260 295 320 370

TRIMAX screwdriver Kit REF.

66291-ELEC 66200-3x100 - 1 66220-PH0 - 1

TRIMAX screwdriver Kit

17,00

333060

66200-4x125 - 1 66220-PH1 - 1

66200-5.5x125 - 1 66220-PH2 - 1

REF.

66292-MEC 66200-3x100 - 1 66210-6.5x150 - 1

19,07

153170

66200-4x125 - 1 66220-PH1 - 1

A mm

B mm

C mm

535

165

312

66210-5.5x125 - 1

125

SCREWDRIVERS AND TIPS / PRECISION SCREWDRIVERS

TIPS

PRECISION SCREWDRIVERS

• Molybdenum-Vanadium chrome plated steel tip. • Sprayed and varnished to guarantee against rust. • For non-heat treated screws.

Advantages: • Excellent control and precision work. • Maximum tip durability and precision. • Ergonomic and anti-slip handle. Features: • Handle head separated from the body for better support and ease of use. • Coloured ring for identification of the type of tip. • Bi-material handle: - Reinforced polymer: highly resistant to impacts. - Elastomer: maximum grip and comfort. • Rod: - CHROME MOLYBDENUM VANADIUM. - CNC machined, blued tips. Uses: • For precision mechanical and electronic tasks.

Bit holder 6307 REF.

Bit holder 6308 £

6307

15,10

623635

A mm

REF.

350

20,5

6308

623659

A mm

130

10,5

Phillips: PH0, PH1 and PH2 / Flat: 5, 6 and 7 / Hex: ¼”.

INDUSTRY

Phillips: PH1, PH2 and PH3 / Flat: 5, 6 and 8 / Pozidrive: PZ1 and PZ2 Torx: T15, T20, T25 y T30 / Hex: 2.5, 3, 4, 5, ¼”, 5/16”, 7/16” Vanadium chrome rod with chrome finish. Fully treated and tempered tips Dual material handle: Dual direction ratchet for easy use. Magnetic system for grasping the tips. Internal storage of the tips.

6,00

A B Flat headed screwdriver 6250 REF.

6250-2.5x75 6250-3x100 6250-3x150

Pozidriv screwdriver 6250

2,80 2,72 2,80

096965 579031 579062

6 6 6

A mm

B mm

L mm

REF.

20 20 25

75 100 150

2,5 3 3

168 193 243

6250-PZ0 6250-PZ1

2,72 2,72

579093 579123

6 6

A mm

B mm

L mm

20 20

60 80

3 4,5

153 173

6300

66304

Adaptors and tip holders REF.

6300 66304

Magnetizer

16,91 13,37

502329 152586

1 6

A mm

REF.

30 115

58 230

6299-B

6300: box with 3 units.

Phillips screwdriver 6250 REF.

6250-PH0 6250-PH1

579154 579185

6 6

A mm

B mm

L mm

20 20

60 80

3 4,5

153 173

REF.

6250-T6 6250-T7 6250-T8 6250-T9

3,93 3,75 3,93 4,18

579215 579246 579277 579307

6 6 6 6

A mm

B mm

L mm

20 20 20 20

60 60 60 60

3 3 3 3

153 153 153 153

Set

6250-1,5x60 - 1 6250-PH0 - 1

601428

6250-2,5x75 - 1 6250-T5 - 1

A mm

B mm

C mm

240

250

120

6250-PH00 - 1 6250-T6 - 1

Practical set for small jobs: glasses, mobile phones, cameras, consoles, etc.

126

A mm

B mm

C mm

Pozidriv tip 6313 g

A mm

100 100

5 5

25 25

A mm

B mm

C mm

0,58 0,58

319620 319729

Tip kit £

19,07

230

To magnetize and demagnetize screw drivers rods.

Phillips tip 6311 6311-PH2 6311-PH3

6250J

REF.

579352

Torx screwdriver 6250

2,98 3,15

10,50

REF.

6390-6 Flat: 0.8x5.5, 1.6x8 Philips: PH1, PH2 Pozidrive: PZ1, PZ2 Adaptor: 6300

REF.

6313-PZ1 6313-PZ2

0,58 0,58

319828 319873

100 100

A mm

5 5

25 25

Tip kit £

12,81

507379

REF.

6390-10

15,83

507430

A mm

B mm

C mm

132

107

Flat: 0.6x4.5, 0.8x5.5, 1.2x6.5, 1.6x8 Philips: PH1, PH2, PH3 Pozidrive: PZ1, PZ2, PZ3 Adaptor: 6300

127

HARDWARE TOOLS

Spanners OPEN END FIXED, COMBINED, DOUBLE RING END SPANNERS

Open end fixed spanner Sets REF.

6490-6BS

Open end fixed spanner Sets

062519

16,70

6400-6x7 - 1 6400-12x13 - 1

REF.

450

6400-8x9 - 1 6400-14x15 - 1

6490-8BS

6400-10x11 - 1 6400-16x17 - 1

Open end fixed spanner Sets

• Wide openings. • Wide neck to withstand increased torque tensions. • Greater head thickness for improved nut clamping. • Tempered heat treatment.

018400

820

6400-8x9 - 1 6400-14x15 - 1 6400-20x22 - 1

6400-10x11 - 1 6400-16x17 - 1

Bag of 8 spanners

REF.

6490-10BS

6400-6x7 - 1 6400-12x13 - 1 6400-18x19 - 1

Bag of 6 spanners

OPEN END FIXED, COMBINED, DOUBLE RING END SPANNERS

25,67

Open end fixed spanner Sets

018325

37,10

1.380

6400-8x9 - 1 6400-14x15 - 1 6400-20x22 - 1

6400-6x7 - 1 6400-12x13 - 1 6400-18x19 - 1 6400-24x26 - 1

REF.

6490-12BS

6400-10x11 - 1 6400-16x17 - 1 6400-21x23 - 1

53,71

2.210

6400-8x9 - 1 6400-10x11 - 1 6400-14x15 - 1 6400-16x17 - 1 6400-20x22 - 1 6400-21x23 - 1 6400-25x28 - 1 6400-30x32 - 1

6400-6x7 - 1 6400-12x13 - 1 6400-18x19 - 1 6400-24x26 - 1

Bag of 10 spanners

018387

Bag of 12 spanners

L L B

A A Open end fixed spanner 6400 REF.

6400-6x7 6400-8x9 6400-10x11 6400-12x13 6400-14x15 6400-16x17 6400-18x19 6400-20x22 6400-21x23 6400-24x26 6400-25x28 6400-27x29 6400-30x32 6400-32x36 6400-34x36 6400-36x41 6400-41x46 6400-46x50 Two openings.

Open end fixed spanner Sets

1,98 2,02 2,20 2,68 2,87 3,30 3,69 4,39 4,78 5,59 6,45 7,73 8,54 14,83 15,37 16,93 24,42 30,94

445558 445619 445671 445749 445800 445862 445930 445992 446081 446173 446210 801231 446296 446333 801316 446395 801354 801392

6 6 6 6 6 6 6 6 6 6 6 6 6 1 1 1 1 1

A mm

B mm

L mm

REF.

25 35 50 70 95 120 170 210 250 300 380 460 480 575 600 720 1.275 1.660

15,8 19,4 23 27,5 30,4 33,4 38,7 43,6 46,3 52,7 54,5 60 61,5 65,8 68 74,3 84,4 94,4

17,5 21 25,1 30 32,3 35,9 40,4 48,2 49,6 56,8 59,5 62 65,4 73,6 76 84,1 93,8 102

126 142 157 170 188 202 220 232 250 266 275 302 298 325 328 360 400 450

6490-8

25,67

6400-6x7 - 1 6400-12x13 - 1 6400-18x19 - 1

781175

6400-8x9 - 1 6400-14x15 - 1 6400-20x22 - 1

840

1 6400-10x11 - 1 6400-16x17 - 1

Set of 8 spanners

Open end fixed spanner Sets REF.

6490-10

37,10

6400-6x7 - 1 6400-12x13 - 1 6400-18x19 - 1 6400-24x26 - 1

781212

6400-8x9 - 1 6400-14x15 - 1 6400-20x22 - 1

1.400

1 6400-10x11 - 1 6400-16x17 - 1 6400-21x23 - 1

Set of 10 spanners

Open end fixed spanner Sets REF.

6490-12 6400-6x7 - 1 6400-12x13 - 1 6400-18x19 - 1 6400-24x26 - 1 Set of 12 spanners

128

53,71

781250 6400-8x9 - 1 6400-14x15 - 1 6400-20x22 - 1 6400-25x28 - 1

2.240 6400-10x11 - 1 6400-16x17 - 1 6400-21x23 - 1 6400-30x32 - 1

Combined spanner 6410 REF.

6410-6 6410-7 6410-8 6410-9 6410-10 6410-11 6410-12 6410-13 6410-14 6410-15 6410-16 6410-17 6410-18 6410-19 6410-20 6410-21 6410-22 6410-24 6410-27 6410-30 6410-32

Combined spanners Sets

2,64 2,64 2,72 3,26 3,30 3,61 3,80 4,04 4,12 4,23 4,54 4,85 5,12 5,79 5,90 6,68 6,91 7,61 10,72 12,97 14,02

446456 446524 446586 446647 446715 446777 446838 446890 446968 447026 447088 447187 447248 447316 447392 447446 447484 447583 447705 447910 447866

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

A mm

B mm

L mm

REF.

20 25 30 35 40 45 60 75 85 95 115 135 155 165 185 210 215 280 380 490 600

16 16,8 18,8 20,9 22,6 24 25,4 28,1 30,1 32,1 34,2 36 37,5 40,2 41,4 43,2 45,8 50 55 60,1 64

10,6 11,6 12,8 14,4 16 17,2 18,5 20,2 21,2 23 24,4 25 27,5 28,6 30,4 31,8 33 36 39,5 43,5 46,8

100 110 115 125 135 145 155 171 181 185 195 210 220 230 240 245 257 270 300 330 350

6491-8

39,08

6410-8 - 1 6410-13 - 1 6410-19 - 1

781298

6410-10 - 1 6410-14 - 1 6410-22 - 1

850

1 6410-11 - 1 6410-17 - 1

Set of 8 spanners

Combined spanners Sets REF.

6491-10

43,48

6410-8 - 1 6410-12 - 1 6410-16 - 1 6410-22 - 1

781335

6410-10 - 1 6410-13 - 1 6410-17 - 1

1.010 6410-11 - 1 6410-14 - 1 6410-19 - 1

Set of 10 spanners

Combined spanners Sets REF.

6491-12 6410-8 - 1 6410-11 - 1 6410-14 - 1 6410-17 - 1

56,60

781373

1.170

6410-9 - 1 6410-10 - 1 6410-12 - 1 6410-13 - 1 6410-15 - 1 6410-16 - 1 6410-19 - 1 6410-22 - 1

Set of 12 spanners

129

INDUSTRY

Advantages: • Long-lasting tools. • Optimal torque transmission. • Wide range. Features: • Chrome-Vanadium steel. • High wear resistance. • Polished heads. • Sprayed nickel and chrome matt finish. • Torque strengths over 30% of the current standard. Uses: • For varied torque and adjustment of nuts and bolts.

SPANNERS / OPEN END FIXED, COMBINED, DOUBLE RING END SPANNERS

DOUBLE HEAD SOCKET WRENCHES • Hexagonal body and openings, forged steel heads. • Through-bore in all sizes from 10x11. • Option for using with fixed or adjustable spanner. • Tempered heat treatment.

Combined spanners Sets REF.

39,08

6410-8 - 1 6410-13 - 1 6410-19 - 1

018547

830

6410-10 - 1 6410-14 - 1 6410-22 - 1

6410-11 - 1 6410-17 - 1

Bag of 8 spanners

Combined spanners Sets REF.

6491-10 BS

Combined spanners Sets

6410-8 - 1 6410-12 - 1 6410-16 - 1 6410-22 - 1

REF.

018448

43,48

980

6410-10 - 1 6410-13 - 1 6410-17 - 1

6410-11 - 1 6410-14 - 1 6410-19 - 1

6491-12 BS

018509

6410-9 - 1 6410-12 - 1 6410-15 - 1 6410-19 - 1

Double ring end wrench spanner 6420 £

6410-10 - 1 6410-13 - 1 6410-16 - 1 6410-22 - 1

4,31 4,70 5,05 5,35 5,78 6,95 7,98 9,19 10,35 12,81 15,06 16,61 17,95 26,19 31,28 42,10 50,78

447958 447996 448030 448078 448115 448153 448191 448238 448276 448382 448429 801477 448511 448559 448610 801590 801637

6 6 6 6 6 6 6 6 6 6 6 6 6 1 1 1 1

Spanner sets

A mm

B mm

L mm

REF.

55 70 90 115 150 190 235 315 350 450 500 670 680 905 1.190 1.600 1.500

10,5 13,2 16,8 19,5 22,2 24,8 28,2 30,9 32 36,7 37,8 40 43,2 47 53 61 69

11,4 14,5 17,9 20,6 23 26 29,2 31,8 33,8 40,9 42,3 42,5 46,5 53 61 69 75

175 185 198 215 228 246 268 292 315 328 342 370 370 400 440 485 535

6492-8

49,18

6420-6x7 - 1 6420-12x13 - 1 6420-18x19 - 1

781410

6420-8x9 - 1 6420-14x15 - 1 6420-20x22 - 1

1.150

Bag of 12 spanners

REF.

56,60

6410-8 - 1 6410-11 - 1 6410-14 - 1 6410-17 - 1

Bag of 10 spanners

6420-6x7 6420-8x9 6420-10x11 6420-12x13 6420-14x15 6420-16x17 6420-18x19 6420-20x22 6420-21x23 6420-24x26 6420-25x28 6420-27x29 6420-30x32 6420-32x36 6420-36x41 6420-41x46 6420-46x50

Double head socket wrenches 6440 REF.

6440-6x7 6440-8x9 6440-10x11 6440-12x13 6440-14x15 6440-16x17 6440-18x19 6440-20x22 6440-21x23 6440-24x26 6440-25x28 6440-30x32

5,39 5,48 5,82 6,82 7,68 8,89 10,61 12,08 13,42 14,32 16,52 21,05

449266 449310 449358 449396 449433 449471 449518 449556 449594 449693 449730 449815

6 6 6 6 6 6 6 6 6 6 6 6

Double head socket wrenches Sets g

A mm

B mm

L mm

REF.

45 58 86 145 140 200 240 300 340 400 500 710

10 13 15 18 20 23 25 28 29 33 34 40

11 14 16 19 22 24 26 30 31 35 37 42

105 110 120 140 145 155 165 170 185 190 205 210

6494-6 BS

Double head socket wrenches Sets

1.310

REF.

6420-10x11 - 1 6420-16x17 - 1

6440-6x7 - 1 6440-12x13 - 1 6440-18x19 - 1 6440-24x26 - 1

Set of 8 spanner

6440-6x7 - 1 6440-12x13 - 1

740

6440-8x9 - 1 6440-14x15 - 1

6440-10x11 - 1 6440-16x17 - 1

Bag of 6 spanners

Double head socket wrenches Sets REF.

6494-8 BS

62,55

6440-6x7 - 1 6440-12x13 - 1 6440-18x19 - 1

029765

1.290

6440-8x9 - 1 6440-14x15 - 1 6440-20x22 - 1

6440-10x11 - 1 6440-16x17 - 1

Bag of 8 spanners

REF.

2.070

021035

90,25

029741

Double head socket wrenches Sets

6494-10 BS

45,12

6440-8x9 - 1 6440-14x15 - 1 6440-20x22 - 1

6440-10x11 - 1 6440-16x17 - 1 6440-21x23 - 1

Bag of 10 Bolsa despanners 10 llaves

6494-12 BS

127,82

6440-6x7- 1 6440-12x13 - 1 6440-18x19 - 1 6440-24x26 - 1

3.250

148862 6440-8x9 - 1 6440-14x15 - 1 6440-20x22 - 1 6440-25x28 - 1

6440-10x11 - 1 6440-16x17 - 1 6440-21x23 - 1 6440-30x32 - 1

Bag of 12 spanners

ADJUSTABLE WRENCHES • Thin and longer openings to access difficult places. • The slide does not stick out. Less space required to operate. • Perfectly straight. Fully adjustable. • Double T cross-section handle: robust, strong and ergonomic. • UN 167063 Patent. • Tempered heat treatment.

L Spanner sets REF.

6492-8 BS

49,18

6420-6x7 - 1 6420-12x13 - 1 6420-18x19 - 1

018622

6420-8x9 - 1 6420-14x15 - 1 6420-20x22 - 1

1.290 6420-10x11 - 1 6420-16x17 - 1

Bag of 8 spanners

Spanner sets REF.

6492-10 BS 6420-6x7 - 1 6420-12x13 - 1 6420-18x19 - 1 6420-24x26 - 1 Bag of 10 spanners

130

Adjustable spanner 6460

Spanner sets g

72,30

018561 6420-8x9 - 1 6420-14x15 - 1 6420-20x22 - 1

2.080 6420-10x11 - 1 6420-16x17 - 1 6420-21x23 - 1

REF.

6492-12 BS

REF. g

105,26

6420-6x7 - 1 6420-12x13 - 1 6420-18x19 - 1 6420-24x26 - 1 Bag of 12 spanners

018592 6420-8x9 - 1 6420-14x15 - 1 6420-20x22 - 1 6420-25x28 - 1

3.240 6420-10x11 - 1 6420-16x17 - 1 6420-21x23 - 1 6420-30x32 - 1

6460-6 6460-8 6460-10 6460-12 6460-15

Adjustable spanner 6464

11,48 13,37 16,18 21,40 36,02

451504 451542 451580 451627 451665

6 6 6 6 1

Spanners with central adjustment wheel.

A mm

B mm

L mm

REF.

153 254 447 713 1.305

20 25 30 36 45

19,3 24 28,9 36 46

153 204 254 305 381

6464-6 6464-8 6464-10 6464-12 6464-16

16,09 17,82 21,31 28,21 44,91

114430 114133 114317 114379 576245

6 6 6 6 1

A mm

B mm

L mm

160 340 580 900 1.570

19 26 32 36 45

20 25 29 35 48

150 200 257 300 405

Spanners with side adjustment wheel.

131

INDUSTRY

6491-8 BS

SPANNERS / ALLEN KEYS

STILLSON WRENCH

ALLEN KEYS

• Blue steel finishing of use and contact areas. • Two versions, standard and monoblock manufactured in aluminium alloy.

• Nickel plated finish. • Chamfered facilitating the key to fit into the screw.

A L A B B

REF.

6450-1.5 N 6450-2 N 6450-2.5 N 6450-3 N 6450-4 N 6450-5 N 6450-6 N 6450-7 N 6450-8 N 6450-9 N 6450-10 N 6450-12 N 6450-14 N

449853 449914 449952 449990 450033 450071 450118 450156 450194 450231 450279 450446 509120

0,35 0,37 0,41 0,43 0,53 0,62 0,77 0,96 1,07 1,42 1,54 2,30 2,89

12 12 12 12 12 12 12 12 12 12 12 1 1

Allen and Torx keys sets g

A mm

B mm

1 1 2 4 10 18 30 43 60 81 105 171 263

14 16 18 20 24 28 32 34 36 38 40 45 56

45 50 56 63 70 79 90 95 100 105 112 125 140

REF.

6455-P3

23,90

1,5 - 1 3 - 1 6 - 1 3/32” - 1 9/64” - 1 7/32” - 1 T10 - 1 T25 - 1 T40 - 1

618815

2 - 1 4 - 1 8 - 1 7/64” - 1 5/32” - 1 1/4” - 1 T15 - 1 T27 - 1

490 2,5 - 1 5-1 5/64” - 1 1/8” - 1 3/16” - 1 T9” - 1 T20 - 1 T30 - 1

Stillson wrench 6600 REF.

6600-8 6600-10 6600-12 6600-14 6600-18 6600-24 6600-36

Kit of 3 sets with Allen and Torx keys.

Stillson wrench 6601 g

A mm

B mm

L mm

REF.

280 590 790 1.040 1.820 3.080 5.690

27 34 42 49 60 76 102

17 22 25 27 30 38 48

200 250 310 350 450 600 900

6601-10 6601-14 6601-18 6601-24

12,08 15,70 17,39 17,39 21,66 52,24 103,45

967326 967364 967401 967449 967487 967524 967562

6 6 6 6 1 1 1

19,71 27,35 37,45 65,83

318630 319088 319170 319262

6 6 1 1

A mm

B mm

L mm

400 1.100 1.500 2.550

34 47 60 76

22,5 27 30 38

250 350 450 600

Monoblock handle manufactured in aluminium alloy.

SOCKET SPANNERS

Nickel plated Allen keys.

• Nickel plated and a matt chrome finish. • Fully tempered heat treatment. L A

B Socket 6520 1/2” Allen and Torx keys sets REF.

6455-8 1,5 - 1 3 - 1 6 - 1

Allen and Torx keys sets

9,58

618976

2 - 1 4 - 1 8-1

170

2,5 - 1 5-1

6450-1.5 N - 1 6450-3 N - 1 6450-6 N - 1 Set of 9 Allen keys.

132

12,60

507218

2-1 4 - 1 8-1

420

2,5 - 1 5-1

Set of 9 Allen keys.

Allen and Torx keys sets 6458-9N

6457-9P 1,5 - 1 3 - 1 6 - 1

Set of 8 Allen keys.

REF.

Allen and Torx keys sets

10,78 6450-2 N - 1 6450-4 N - 1 6450-8 N - 1

507294

6 6450-2.5 N - 1 6450-5 N - 1 6450-10 N - 1

260

REF.

6459-9TIP T9 - 1 T20 - 1 T30 - 1

13,33

618976

170

T10 - 1 T15 - 1 T25 - 1 T27 - 1 T40 - 1 T50 - 1

6520-10 6520-11 6520-12 6520-13 6520-14 6520-15 6520-16 6520-17 6520-18 6520-19 6520-20 6520-21 6520-22 6520-23 6520-24 6520-25 6520-26 6520-27 6520-28 6520-30 6520-32

Universal joint 6521 1/2”

2,72 2,76 2,89 3,06 3,19 3,32 3,36 3,49 3,49 3,67 3,84 3,84 3,97 4,18 4,49 4,57 4,66 4,79 5,13 5,35 5,35

Hexagonal opening.

453010 453058 453096 453133 453171 453218 453256 453294 453331 453379 453416 453454 453492 453539 453591 453638 453676 453713 453775 453867 453911

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6

A mm

B mm

L mm

REF.

56 58 58 58 60 62 66 66 66 66 72 74 86 88 96 106 108 126 140 150 180

23 23 23 23 23 23 23 23 23 23 23 24 24 25 25 26 25 26 27 28 28

15 16 18 19 20 22 23 24 25 26 28 29 30 31 33 34 35 36 38 40 43

40 40 40 40 40 40 40 40 40 40 40 40 40 40 42 42 42 44 44 46 46

6521

13,50

485110

A mm

B mm

L mm

135

12,6

A mm

B mm

L mm

1 1

180 345

23 23

14 14

125 250

A mm

B mm

L mm

375

292

A mm

B mm

L mm

610

270

Extension 6523 1/2” REF.

6523-5 6523-10

6,21 7,85

485158 485196

Sliding handle 6524 1/2” REF.

6524

9,53

485233

Ratchet lever 6528 1/2” REF.

6528

27,39

485431

Set of 9 Torx keys.

133

INDUSTRY

Allen keys 6450

HARDWARE TOOLS

SPANNERS / SOCKET SPANNERS

Pliers

Extension 6543 3/4”

6540-22 6540-23 6540-24 6540-26 6540-27 6540-28 6540-30 6540-32 6540-36 6540-38 6540-41 6540-42 6540-46 6540-50

7,51 7,51 8,02 8,02 8,33 8,33 9,32 9,53 11,00 11,91 13,11 13,11 15,49 17,64

454871 454932 454963 454994 455038 455069 455090 455137 455168 455199 455236 455267 455298 455335

1 1 1 1 1 1 1 1 1 1 1 1 1 1

A mm

B mm

L mm

190 190 200 240 240 260 290 330 430 510 610 570 720 840

35 35 35 36 36 36 37 38 40 41 42 41 44 46

32 34 34 38 39 40 43 45 51 53 57 58 63 69

50 51 52 54 55 56 57 58 61 62 63 64 72 78

REF.

6543-8 6543-16

15,27 20,53

485554 485592

A mm

B mm

L mm

1 1

520 950

33 33

20 20

200 400

A mm

B mm

L mm

1.150

500

Sliding handle 6544 3/4” REF.

6544

23,81

485639

INDUSTRY

Socket 6540 3/4” REF.

Advantages: • Guaranteed cutting, holding and clamping. • Fast working. • Ergonomic dual material handle. • Long-lasting tools. • Wide range. Features: • Improved quality carbon steel. Oil tempered and induction treated edges. • High wear resistance. • Polished finish, nickel/chrome plated heads. • Quality rivets and joints. • Special handles design providing effectiveness and comfort. Maximum force transmission, improved clamping power and cutting capacity. • PVC and dual material handles. Uses: • For holding, clamping, cutting, handling, wire stripping.

Hexagonal opening.

UNIVERSAL PLIERS Ratchet wheel 6549 3/4”

Reducer 6546 3/4” €

REF.

6546

11,17

485714

A mm

B mm

L mm

185

12,6

REF.

6549

69,28

507492

A mm

B mm

L mm

2.600

510

• Three different teeth areas. • Combining holding, clamping and cutting in one single tool. - Holding: smooth and refined teeth to hold without marking. - Clamping: thick teeth holding rounded parts and pipes. - Cutting: semi hard and hard materials to a diameter of 2.5 mm. • Temper and blue steel hardening of the head. • Induction tempered edges.

Reductor 3/4’’-1/2’’.

SOCKET SPANNERS SETS

L Reinforced universal pliers 6100 PVC REF.

8,41 6100-160 PVC 6100-180 PVC 9,28 6100-200 PVC 12,25

442854 442892 442946

6 6 6

Reinforced universal pliers 6100 BIM

A mm

B mm

C mm

L mm

REF.

250 330 385

25 25,8 29

35 38 40

9 9,6 9,8

164 184 207

6100-160 BIM 6100-180 BIM 6100-200 BIM

PVC handle. Mango PVC.

10,74 11,82 13,07

332797 332926 333022

A mm

B mm

C mm

L mm

35 38 40

9 9,6 9,8

164 184 207

A mm

B mm

C mm

L mm

25 28 27,6

36 37 42

9,7 10 10,4

165 186 207

6 6 6

190 25 230 25,8 290 29

6 6 6

210 265 325

Dual Mango material bimaterial. handle.

Socket spanners sets REF.

6592-1/2 H1 6520-8 - 1 6520-11 - 1 6520-14 - 1 6520-17 - 1 66520-21 - 1 6520-24 - 1 6520-28 - 1 6520-32 - 1 6523-10 - 1

134

€

159,31

780611 6520-9 - 1 6520-12 - 1 6520-15 - 1 6520-18 - 1 6520-22 - 1 6520-26 - 1 6520-29 - 1 6521 - 1 6524 - 1

A mm

B mm

C mm

4.700

380

255

6520-10 - 1 6520-13 - 1 6520-16 - 1 6520-19 - 1 6520-23 - 1 6520-27 - 1 6520-30 - 1 6523-5 - 1 6528 - 1

Universal pliers 6102 PVC REF.

6102-180 PVC 10,14

PVC handle.

Universal pliers 6102 BIM

442519

A mm

B mm

C mm

L mm

REF.

265

186

6102-160 BIM 6102-180 BIM 6102-200 BIM

10,91 12,08 13,55

333121 333220 333329

Dual material handle.

135

PLIERS / CUTTING PLIERS

CUTTING PLIERS • Temper and blue steel hardening of the head. • Induction tempered edges. Handling pliers 6122 PVC REF.

Handling pliers 6122 BIM

6122-200 PVC 12,25

444261

A mm

B mm

C mm

L mm

REF.

180

17,5

2,5

199

6122-200 BIM

Diagonal cutting pliers 6110 PVC 9,32 10,44

443240 443288

A mm

B mm

C mm

L mm

REF.

20 20

10,6 10,3

165 185

6110-160 BIM 6110-180 BIM

225 21,8 280 23,4

6 6

12,51 14,02

333527 333626

6 6

A mm

B mm

C mm

L mm

20 20

10,6 10,3

165 185

220 21,8 280 23,4

B mm

C mm

L mm

17,5

2,5

199

Dual material handle.

Handling pliers 6130 PVC REF.

Handling pliers 6130 BIM

6130-160 PVC 10,53

444384

A mm

B mm

C mm

L mm

REF.

160

15,8

9,2

160

6130-160 BIM

Flat openings. PVC handle.

Diagonal reinforced cutting pliers 6112 PVC 9,88 10,91

A mm

6112-180 PVC 6112-200 PVC

A mm

443516 443554

334357

A mm

B mm

C mm

L mm

15,8

9,2

160

Flat openings. Dual material handle.

Diagonal reinforced cutting pliers 6112 BIM B mm

C mm

L mm

REF.

21 21

10,9 10,7

189 205

6112-180 BIM 6112-200 BIM

240 26,8 270 26,9

6 6

175

12,99

PVC handle.

12,25 13,85

333725 333909

6 6

A mm

B mm

C mm

L mm

21 21

10,9 10,7

189 205

260 26,8 290 26,9

Dual material handle.

Handling pliers 6134 BIM REF.

6134-160 BIM

Front cutting pliers 6114 PVC REF.

B mm

C mm

L mm

REF.

6114-160 PVC

11,65

443776

200 28,5

10,2

168

6114-160 BIM

A mm

B mm

C mm

L mm

265

28,5

10,2

168

13,80

333954

A mm B mm C mm D mm L mm

165 15,5

9,7

3,2

167

Rounded openings. Dual material handle.

Front cutting pliers 6114 BIM A mm

13,76 334456

Dual material handle.

PVC handle.

HANDLING PLIERS • Temper and blue steel hardening of the head. Handling pliers 6142 PVC

Handling pliers 6140 PVC REF.

6140-10 6140-19

8,84 9,62

444698 444735

6 6

A mm

B mm

L mm

REF.

85 185

41,5 57

1,25 1,7

135 178

6142-10 6142-19

8,93 10 05

444858 444896

6 6

A mm

B mm

L mm

85 185

26 45

1,25 1,7

125 170

A mm

B mm

L mm

85 185 240

28 39 50

0,85 1,7 2,3

126 167 215

Curved opening exterior clips. PVC handle.

Straight opening exterior clips. PVC handle.

L Handling pliers 6120 PVC REF.

6120-160 PVC 10,53 444025 6120-200 PVC 11,48 444063

6 6

A mm B mm C mm D mm L mm

140 16,7 180 17,5

Semi-rounded straight openings. PVC handle.

136

Handling pliers 6144 PVC

Handling pliers 6120 BIM 52 76

8,5 8,5

2,5 164 1,7 203

REF.

6120-160 BIM 6120-200 BIM

REF.

12,25 14,11

334050 334159

6 6

A mm B mm C mm D mm L mm

145 16,7 190 17,5

52 76

Semi-rounded straight openings. Dual material handle.

8,5 8,5

6144-19

Handling pliers 6146 PVC

9,45

445022

2,5 164 1,7 203 Straight opening interior clips. PVC handle.

A mm

B mm

L mm

REF.

185

1,7

182

6146-8 6146-19 6146-40

8,41 9,75 12,25

445114 462876 445190

6 6 3

Curved opening interior clips. PVC handle.

137

INDUSTRY

PVC handle.

REF.

Diagonal cutting pliers 6110 BIM

6110-160 PVC 6110-180 PVC

334258

Semi-rounded curved openings. Dual material handle.

Semi-rounded curved openings. PVC handle.

REF.

190

14,45

ACCESSORIES

PLIERS AND WIRE CUTTERS / WIRE STRIPPERS

Bench vice

WIRE STRIPPERS

Advantages: • Clamping in safety. • Easy to use. • Long-lasting tools. • Optimising clamping force. Features: • Heat treated milled vices for better grip. • Broad anvil providing a larger working area. • Support on a square guide. • Option for including accessories: Rotating base and jaws. • High strength. Uses: • For holding, gripping and mounting different parts / profiles.

• Temper and blue steel hardening of the head, minimum hardness 45 HRc.

Wire strippers 6150 PVC REF.

Wire strippers 6150 BIM g

A mm

B mm

C mm

L mm

REF.

150

164

6150-160 BIM

6150-160 PVC 12,77

445237

A mm

B mm

C mm

L mm

165

164

14,88

334555

Dual material handle.

PVC handle.

MULTI-OPENING PLIERS

INDUSTRY

• Temper and blue steel hardening of the head, minimum hardness 45 HRc.

A Multi-opening rack 6160 PVC REF. £

Multi-opening box 6162 PVC g

6160-250 PVC 10,74 445367

350

A mm B mm C mm D mm L mm

252

PVC handle.

REF.

6162-250 PVC 15,57 445442

290

A mm B mm C mm D mm L mm

245

PVC handle.

Bench vice 6700 REF.

6700-100 6700-125 6700-150 6700-175

LOCKING PLIERS

Bench vice 6710

135,16 191,45 247,02 330,19

026313 026337 019872 019858

1 1 1 1

7.000 11.000 17.000 26.000

A mm B mm C mm D mm E mm

REF.

100 125 150 175

6710-80 6710-100 6710-125 6710-150

125 148 178 208

125 60 150 70 200 90 220 105

52 62 75 95

Locking plier 6167 BC 6167-180 BC 6167-250 BC

10,05 623925 11,73 623949

3 3

A mm

L mm

MAX mm

340 520

55 65

180 250

38 47

REF.

6167-180 BR 6167-250 BR

10,05 623963 11,73 623987

3 3

370 530

A mm L mm

55 65

180 250

75 65 5.400 75 115 75 66 6.300 100 123 11.600 125 151 100 90 20.000 150 174 125 115

46 54 65 77

33 44

Straight jaw.

Rotating base 6701 REF.

Accessories

6701-100 6701-125 6701-150 6701-175

Metal Boxes 6900-6902

Riveter 6170 £

13,55

340778

A mm

B mm

C mm

REF.

710

250

6900-400 6900-500 6902-500

Includes: accessories for 2.2 mm, 2.4 mm, 4 mm and 4.8 mm rivets, plus assembly spanner.

138

1 1 1 1

MAX mm

ACCESSORIES

6170

A mm B mm C mm D mm E mm

365375 353419 353457 353488

Locking plier 6167 BR

Curved jaw.

REF.

43,40 61,30 79,59 103,36

Cast bench vice.

Forged bench vice.

REF.

23,86 25,88 45,60

057133 057140 057157

1 1 1

A mm

B mm

C mm

3.500 4.000 5.500

400 500 500

200 200 200

180 180 230

Rotating base 6711

32,83 50,21 57,98 75,32

REF.

1 1 1 1

035599 035605 035612 035629

800 1.250 2.000 2.800

6700-100 6700-125 6700-150 6700-175

Clamps 6702 REF.

6702-100 6702-125 6702-150 6702-175

20,10 30,76 35,46 46,03

365436 353549 353570 353600

1 1 1 1

700 700 1.450 2.100

365481 353686 353730 353785

2 2 2 2

200 310 460 900

6710-80 6710-100 6710-125 6710-150

Clamps 6712 g

19,33 19,33 22,78 22,78

6711-80 6711-100 6711-125 6711-150

035636 035643 035650 035667

1 1 1 1

310 460 900 960

REF.

12-55 12-75 17-90 17-120

6700-100 6700-125 6700-150 6700-175

6712-80 6712-100 6712-125 6712-150

11,82 11,82 14,02 14,02

6710-80 6710-100 6710-125 6710-150

139