LOCKER_S
The LOCKER_S by Bene ensure that there is order in the office: documents and personal articles can be stowed away and locked here. Single-row and double-row storage units as well as open coat racks can be combined at will with each other. The two-colour design option of the doors allows to vary the look of the fronts according to individual customer requirements or the corporate identity of
companies. The locker unit can also be provided with a casing: top panel, side panel, rear wall cladding complement and add value, particularly to the free-standing lockers. The individual doors are fitted with cylinder- or combination locks to close and open the lockers.
PRODUCT DESCRIPTION
LOCKER_S (SINGLE ROW / DOUBLE ROW)
LOCKER_S, single-row
Hinged door: 19 mm chipboard
Mail slot: plastic
Business card holder: polycarbonate
Combination lock: plastic / steel
Cylinder lock: steel / brass
Visible side: 19 mm chipboard
Shelf: 19 mm chipboard / + 25 mm ajustment feet can be levelled, base panel optional
Intermediate shelf: 19 mm chipboard
Pigeon hole: steel plate
Rear wall: 16 m chipboard
LOCKER_S, double-row
panel: 19 mm chipboard
Shelf: 19 mm chipboard
Visible side: 19 mm chipboard
Clothes rod: chrome-plated steel
Pull-out rail: chrome-plated steel
Hat shelf: 19 mm chipboard
Rear wall: 16 mm chipboard
7
Top panel: 19 mm chipboard
PRODUCT DESCRIPTION
LOCKER_S WITH PANELS
Cover panel: 19 mm chipboard
Covered side: 19 mm chipboard
Rear wall cladding: 19 mm chipboard
A pinnable rear wall made of fabric can be optionally attached to all the cabinet types, with a maximum height of 1170 mm.
without pigeon hole +84 mm illustrations are suggested types, intermediate sizes are possible
LOCKER_S DImEnSIO
DIMENSIONS
LOCKER_S, SINGLE-ROW
W: 450 - 600
D: 450 - 600
H: 431 1 door
721, 921 1, 2 doors
1.116* 1, 2, 3 doors
1.311 2, 3 doors
1.501, 1.701 2, 3, 4 doors
1.701, 1.916 2, 3, 4, 5 doors
* Single door across the entire cabinet height not available over 1.117 mm onwards.
LOCKER_S, DOUBLE-ROW
OPEN WARDROBE
W: 900 - 1.200
D: 450 - 600
H: 431 2 doors
721, 921 2, 4 doors
1.116* 2, 4, 6 doors
1.311 4, 6 doors
1.501, 1.701 4, 6, 8 doors
1.701, 1.916 4, 6, 8, 10 doors
* Single door across the entire cabinet height not available over 1.117 mm onwards.
W: 450, 600: with rod
600*: with pull-out rail
D: 600*: with rod
450*: with pull-out rail
H: 1.311, 1.501, 1.701: without hat shelf
1.916: with hat shelf
* not variable
measurements in mm
Illustrations are suggested types, intermediate sizes are possible
DIMENSIONS
LOCKER_S WITH PANELS
W: Cover panel, rear wall: user-defined, clear widths of the LOCKER_S are variable from 450 to 7.200
D: 450, 600, 900, 1.200 470: with rear wall cladding
H: 450, 740, 940, 1.135, 1.330, 1.520, 1.720, 1.935
Divisions (width)
Cover panel max. 2 divisions are possible; min. one division from 2.401 onwards
Rear wall max. 5 divisions are possible; for height < = 1.250: from 2.000 onwards (melamine), from 1.560 onwards (veneer), from 1.250 onwards (fabric) for height > 1.135: from 1.200 onwards (melamine / veneer )
The default value is a uniform division (e.g. half width); however, a different division for cover panel can also be entered.
measurements in mm
Illustrations are suggested types, intermediate sizes are possible
LOCKER_S
OPTIONS
MAIL SLOT (INCL. PIGEON HOLE)
BUSINESS CARD HOLDER
CYLINDER LOCK
COMBINATION LOCKS
FIXCODE DIAL LOCK 59
The FIXCODE combination lock is designed for long-term use or for usage over defined periods (e.g. by project teams). The code is selected freely by the user and needs to be set initially using the programming pin (which is part of the service key package); it then stays the same until it is reset.
Link to explanatory video on the FIXCODE lock
https://www.youtube.com/watch?v=hArf44hod2Q
FREECODE DIAL LOCK 58
For the FREECODE combination lock, the code is reset every time the lock is used: the user programmes the code before locking, and it is deleted again after opening. So every time the lock is opened and closed a new code needs to be defined. The FREECODE lock is designed for use by different people every time, e.g. for lockers in sports and fitness facilities, libraries, museums, trade fairs and the hotel industry.
Link to explanatory video on the FREECODE lock
https://www.youtube.com/watch?v=GucJmYDSGSY
nOTE: When you order LOCKER_S with a combination lock it is recommended to also order the service key package.
CLOTHES ROD OR PULL-OUT RAIL
Clothes rod Pull-out rail (in the extended state, max. load 5 kg)
COMBINATION LOCK
CYLINDER LOCK
with mail slot
HAT SHELF
BASE PANEL
material: Plastic
with business card holder and mail slot
Rear side: operating instr. for combination lock with business card holder with business card holder
with business card holder and mail slot
with mail slot
OPTIONS
When configured with a shelf (shelf sleeve with shelf screw), the shelf is always preinstalled in the centre. If this option is chosen, the shelves are automatically fitted throughout the entire cabinet.
The rows of shelving holes (3 height positions) are always in the centre in the niche. If the shelf is to be fitted 50 mm higher or lower, the shelf screw must be unscrewed and repositioned.
Caution! When doing so, the melamine layer around the drill hole can easily become chipped! Shelf material: 19 mm chipboard
Please note: If no shelf is configured, the LOCKER_S is delivered without rows of shelving holes
When configured with a slide-in shelf (plastic shelf supports), it is always preinstalled in the centre. If this option is chosen, the shelves are automatically fitted throughout the entire cabinet.
The rows of shelving holes (3 height positions) are always in the centre in the niche. If the slide-in shelf is to be installed 50 mm higher or lower, the hinged door must be unhinged, the slide-in shelf pushed out and the plastic shelf supports (power connection) repositioned.
Shelf material: chipboard available in widths: 12 mm / 16 mm / 19 mm
Please note: if no slide-in shelf is configured, the LOCKER_S is delivered without rows of shelving holes.
The bottom front can optionally be designed as a drawer. Drawer front, bottom and rear wall made of chipboard and metal frames with full extension.
Drawer width and depth always the same for suggested types, with intermediate dimensions, the width and depth of the drawer changes.
LOCKER_S InSPIRATIO
INSPIRATIONS
Inspiration #01
LOCKER_S, single-row/double-row with panels with cylinder lock.
Inspiration #02
Single-row and double-row furniture with different doors to brighten up the look of your front.
INSPIRATIONS
Inspiration #03
Cabinets and wardrobe cabinets for free-standing application in the room.
Inspiration #04
Low height furniture can double as stand-up meeting space.
COLOURS & MATERIALS
MELAMINE GROUP 1: Basic colours
MELAMINE GROUP 2: Additional basic colours
MELAMINE GROUP 2: Decor colours
MELAMINE GROUP 3: Accent colours
3:
COLOURS & MATERIALS
VENEER: Maple
VENEER: Chestnut
VENEER: Nut
VENEER: Beech
VENEER: Oak
Various material collections are available as cover materials: Era, Urban Plus, Xtreme Plus, Inn, Step, Step melange, Remix, Europost, mainline Flex, Assam, Steelcut, Fiord, Hallingdal, Steelcut Trio, Divina melange, Divina mD, Coda, Elle.
more information about the specific fabric collections is available at www.bene.com.
THE BENE RESPONSIBILITY
Bene plays a pioneering role in the field of sustainability. This spans all company divisions – from product development, procurement, production, and logistics to product recycling. From the first sketch through to series production, ecological requirements are always an important factor in the product development process. It includes selecting environmentally compatible materials, such as certified timbers from sustainably managed forests, using recycled materials and increasing the use of renewable raw materials. Other important requirements for a sustainable product design are labelling the materials, their ability to be repaired, and a long service life for the components used, with the aim to integrate them into a second product life cycle.
To guarantee a high recyclability standard for our products at the end of their service life, we avoid composites as much as possible and develop furniture that allows for disassembly by material type.
Bene products are sourced and made in Europe. 99.9% of all deliveries reach us from a European country. Around 94% of all raw material supplies come from Austria and Germany. Around 93% of the raw materials comes from suppliers within 500 kilometres of our production site.
SUSTAINABLE RAW-MATERIALS
At Bene, the following materials are used as a matter of course:
· chipboards low in formaldehyde glues low in formaldehyde
· water-based varnish systems recyclable materials
· materials with a high recycling share
PVC-free synthetics
CONTRIBUTION TO BUILDING CERTIFICATIONS
Bene guarantees products free from:
· CmR substances
halogenated solvents in synthetics
· chlorinated hydrocarbons heavy metal pigments
· materials with azo pigments
Coatings with biocidal effects (such as wood preservatives, pesticides).
In the context of ecological building certification, design systems such as furniture and dividing walls help to achieve a good result and a higher score.
Bene's products make a contribution towards the LEED, WELL Building Standard, DGnB, BREEAm, etc. certifications. Criteria include, for example, environmental product declarations, indoor air quality, acoustics and convertibility.
LOCKER_S
Example configuration
· LOCKER_S Double-row
· 900 x 1.501 x 450 mm
melamine, Chipboard 19 mm
· Total weight 72,36 kg
Materials
Environmental key figures
· 98,4 % sortable by type
98,1 % recyclable
· 88,3 % of contents are renewable raw materials
67,95 % recycled production materials
On request, Environmental Product Declarations (EPD, LCA) – at Bene we call them Life Cycle Data Sheets – can be provided for all standard product configurations.
A list of product-specific certificates and design awards can be found on the Bene product website.
Environment-related information about Bene:
https://bene.com/en/sustainability-report-2021/