403PC 290PC FOAMED FOAMED OPTIONS AVAILABLE $1999 $2999 + $200 + $300 APPRENTICE CASH APPRENTICE CASH • 12v 250 - 700AMP Jump start (Petrol engines up to 5L V8 & Diesel up to 3L) (approx. double normal laptop battery life) • 12v Port for powering or charging 12v accessories 700A LI+ POWER BANK JUMP STARTER $169 SP61071 IMPACT RESISTANT EXTENDABLE SWIVEL LIGHT 360° 120° LIGHT SPREAD DIFFUSED LIGHTWEIGHT 1596(W) x 480(D) x 1070(H) • 1/4", 3/8" & 1/2"dr sockets & acc. • Quad Drive ROE spanners • Assorted screwdrivers & MUCH MORE CUSTOM SERIES TOOL KIT METRIC/sAE 290PC BRAND NEW COLOUR OPTIONS: 1 APRIL TO 30 JUNE 2024 Q2 $349 NORMALLY $310 NORMALLY REDEMPTION REFER TO PAGE 3 FOR MORE DETAILS
$2895 SP50125X FOAMED APPRENTICE CASH $290 APPRENTICE CASH $200 CUSTOM SERIES TOOL KIT METRIC/SAE 680(W) x 460(D) x 1405(H) 293PC NEW TOOL KITS 2 $1229 SP50099 205PC CUSTOM SERIES TOOL KIT METRIC/SAE 668(W) x 445(D) x 465(H) 254PC CUSTOM SERIES TOOL KIT METRIC/SAE $1849 SP50123X FOAMED $1749 SP50123 STANDARD 668(W) x 445(D) x 465(H) 138PC Custom SERIES TOOL KIT METRIC ONLY 668(W) x 316(D) x 461(H) $1195 SP50087 QUAD DRIVE & FLARE NUT SPANNERS INCLUDES QUAD DRIVE SPANNERS INCLUDES QUAD DRIVE SPANNERS INCLUDES $5795 SP50165X APPRENTICE CASH $580 CUSTOM SERIES TOOL KIT METRIC/SAE 680(W) x 460(D) x 1405(H) 632PC QUAD DRIVE, GEAR DRIVE, FLARE NUT, E-TORX & DOUBLE RING SPANNERS INCLUDES $3995 SP50110X FOAMED APPRENTICE CASH $400 CUSTOM SERIES TOOL KIT METRIC/SAE 680(W) x 460(D) x 1405(H) 370PC QUAD DRIVE, FLARE NUT & DOUBLE RING SPANNERS INCLUDES 2 $1999 EACH CUSTOM SERIES ROLLER CABINET TOOL KIT METRIC/SAE 237PC SP50623BK SP50623DT BRAND NEW COLOUR OPTIONS: FOAMED REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE
$3195 SP52265DX $2250 SP52255DX FOAMED $320 745(W)x 480(D) x 1390(H) 282PC Tech Series tool kit metric/SAE TOP BOX + ROLL CAB 730(W) x 480(D) x 507(H) 282PC tech series tool kit metric/SAE 1145(W) x 480(D) x 870(H) $3695 STANDARD APPRENTICE CASH $370 *POWER TOOLS 1145(W) x 480(D) x 1506(H) Tech SERIES TOOL KIT WITH POWER TOOL CUPBOARD METRIC/SAE FOAMED $6395 633 PIECE $5795 SP50444DX 629PC TECH SERIES TOOL KIT METRIC/SAE 745(W) x 480(D) x 1520(H) FOAMED APPRENTICE CASH $580 TECH SERIES TOOL KIT METRIC/SAE 369PC FOAMED 213PC Tech Series tool kit metric only $3095 SP50039DX $2095 SP50033DX $310 745(W)x 480(D) x 1390(H) TOP BOX + ROLL CAB 730(W) x 480(D) x 507(H) 212PC tech series tool kit metric ONLY $4350 SP52384DX 346 PIECE TECH SERIES TECH SERIES TOOL KIT METRIC ONLY 745(W) x 480(D) x 870(H) 230PC $2195 SP52525D STANDARD $2249 SP52525DX FOAMED APPRENTICE CASH $230 APPRENTICE CASH $220 REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE PURCHASE ANY MARKED TOOL KIT REDEMPTION REDEEMING IS SIMPLE! HEAD OVER TO SPTOOLS.COM TO CLAIM YOUR FREE HOODIE & BEANIE
$7999 SP50558 STANDARD $800 APPRENTICE CASH $8199 SP50558X FOAMED $820 APPRENTICE CASH 579PC sumo SERIES power hutch tool kit WITH DUAL SIDE CABINETS metric/sae FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT 4 OFF-ROAD TOOL KITS 90pc heavy duty TOOL ROLL SET INCLUDES • Spanners, screwdrivers, pliers, bit set, ratchet • 11PC 1/2" Dr impact socket rail set • Circuit tester, headlamp, insulated crimper + MUCH MORE 499 SP51280 $49 SP40350 heavy duty roll only Off Road Series Field Service Tool Kit METRIC/SAE 411PC up to 55mm & 1-7/8" INCLUDES Jumbo 3/4"Dr Sockets • 1/4”, 3/8”, 1/2” & 3/4"dr sockets & access. • Quad Drive ROE spanners • Screwdrivers, hex & torx keys, Adjustable wrenches, Hammers, pliers, cutters + MORE 729(W) x 508(D) x 660(H) $4549 SP50218 TOOL KITS IN X-CASES Metric/SAE IDEAL FOR THE PRO ON THE MOVE OR AS A HANDY KIT FOR THE CAR AVAILABLE IN 3/8”DR & 1/2”DR KITS INCLUDE • Sockets & accessories • Quad Drive spanners - 8 to 19mm • Screwdrivers & hex keys & MORE MODEL PCS DRIVE SP51204 65pc 3/8"Dr SP51205 60pc 1/2"Dr $299 EACH KIT INCLUDES • Digital Insulation Tester • Digital Automotive Multimeter • 8pc Screwdriver Set • Pliers & Cutters • 8pc Screwdriver Set • 10pc Spanners Set • 10pc Socket Set + MUCH MORE SP55956 $2495 ELECTRIC VEHICLE VDE SERVICE KIT 7 DRAWER CUSTOM SERIES ROLLER CABINET SERvicE MODULES EV KIT INCLUDES • Digital Insulation Tester • Digital Automotive Multimeter • 8pc Screwdriver Set • Pliers & Cutters • 8pc Screwdriver Set + MUCH MORE SP55955 $1990 ELECTRIC VEHICLE VDE SERVICE KIT 2 DRAWER DIAGNOSTIC TROLLEY AVAILABLE IN 300PC & 550PC KITS $4499 SP50551X FOAMED $450 APPRENTICE CASH $6595 SP50557X FOAMED $660 APPRENTICE CASH AVAILABLE WITHOUT SIDE CABINETS DUAL LAYER POWDER COAT EXTENSION TRADIE CA$H $460 OVER $1000 of cordless tools included! • 12v Mini 3/8’’Dr Ratchet Wrench • 18v Compact 1/2’’Dr Brushless Impact Wrench REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE
622mm 1500mm 1500(W) x 622(D) x 1090(H) EACH $7195 SP50805 Black/Chrome SP50805BL Blue/Black SP50805G Green/Black 59" USA SUMO SERIES ROLLER CABINET TOOL KIT METRIC/SAE 465PC 73" USA SUMO SERIES ROLLER CABINET TOOL KIT METRIC/SAE 465PC $12,990 EACH SP44890 SP44890BL SP44890G ALSO AVAILABLE AS STORAGE ONLY WORKSTATION INCLUDES: 73" USA SUMO 21 Drawer Roller Cabinet & Power Top Hutch & 2x 27" Side Cabinets $17,500 EACH SP50845 SP50845BL SP50845G 128” USA SUMO SERIES WORKSTATION TOOL KIT COMBINED DIMENSIONS: 3250(W) x 622(D) x 1954(H) 704PC METRIC/SAE SUMO SERIES Roller CabINET TOOL KIT METRIC/SAE 448PC SUMO SERIES Built-in power board with 4 individually switched power outlets and 4 USB ports, adjustable shelf and deep drawer 1434w x 560d x 1074h (mm) $4995 SP50780 1434mm 1074 mm REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE REDEMPTION HOODIE & BEANIE 622mm 1850mm EACH $7999
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT SPTOOLS.COM 1434mm BUILD YOUR WAY UP TO A USA SUMO WORKSTATION D B A C 128" COMPLETE STORAGE WORKSTATION COMBINED DIMENSIONS: 3250(W) x 622(D) x 1954(H) WORKSTATION INCLUDES: 73" USA SUMO 21 Drawer Roller Cabinet & Power Top Hutch & 2x 27" Side Cabinets $10,999 EACH $12,990 EACH A B C D 1500(W) x 622(D) x 1090(H) EACH $4599 EACH $6179 SP44725 SP44725BL SP44725G SP44825 SP44825BL SP44825G WORKSHOP RoLLER CABINET 13 Drawer 59" 59" 73" 73" 1850(W) x 622(D) x 1090(H) WORKSHOP RoLLER CABINET 21 Drawer $2995 EACH SP44830 SP44830BL SP44830G SP44890 SP44890BL SP44890G $2569 EACH SP44730 SP44730BL SP44730G TOP HUTCH TOP HUTCH SHELF/LIGHT/PEGBOARD SHELF/LIGHT/PEGBOARD 1500(W) x 622(D) x 864(H) 1850(W) x 622(D) x 864(H) SIDE CABINET 4 Roller SHELVES & 1 FIXED SIDE CABINET CLOTHES RAIL & FIXED SHELVES 700(W) x 622(D) x 1954(H) 700(W) x 622(D) x 1954(H) $2395 EACH $2495 EACH SP44885 SP44885BL SP44885G SP44880 SP44880BL SP44880G ULTRA SOFT INTERIOR INCLUDED WITH EACH USA SERIES ROLLER CABINET +BONUS PREMIUM pADDED ROLL CAB COVER VALUED AT: Also available seperately 59" $299 SP44725COV $399 73" SP44825COV 114" COMPLETE STORAGE WORKSTATION ALSO AVAILABLE: COMBINED DIMENSIONS: 3250(W) x 622(D) x 1954(H) SP44790 SP44790BL SP44790G 27" 27"
7 STORAGE • Semi-rigid canvas • Waterproof base * Beers not included, but recommended OPEN MOUTH TOOL BAG PREMIUM SP COOLER BAG 580(W) x 540(D) x 380(H) $79 SP40360 $49 SP40349 $495 SP40015 • Easy access pockets and compartments 4 Drawer Steel Diagnostic Trolley 964(W) x 414(D) x 964(H) • Front & back storage pouches • Solid plastic base • Fixed carry handle & removable strap APPRENTICE CASH $80 APPRENTICE CASH $120 APPRENTICE CASH $100 TRADIE CA$H $100 SIMPLY PURCHASE A 'TRADIE CASH' MARKED PRODUCT AND RECEIVE AN ONLINE VOUCHER TO SPEND AT WWW.SPTOOLS.COM PICK THE BONUS TOOLS YOU WANT REDEEMING IS QUICK AND EASY. VISIT OUR TRADIE CASH PAGE AT SPTOOLS.COM FOR MORE INFORMATION Visit sptools.com for full terms & conditions. TRADIE CA$H FITS OVER 30 375ml CANS! $299 NORMALLY
36" 4 DRAWER FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT SPTOOLS.COM 8 CUSTOM SERIES STACKABLE STORAGE NEED MORE STORAGE SPACE? $589 SP40102 $699 SP40111 7 Drawer TOOL BOX • Internal locking system • Heavy duty 28 ball bearing drawer slides • Robust wall construction • Full drawer extension capabilities 668w x 445d x 465h (mm) 5 Drawer ROLL CAB • Internal locking system for extra security • Heavy duty 28 ball bearing drawer slides • Robust wall construction • Full drawer extension capabilities 680w x 460d x 812h (mm) 3 Drawer INTERMEDIATE TOOL BOX 670w x 316d x 265h (mm) • Internal locking system • Heavy duty 28 ball bearing drawer slides • Robust wall construction • Double powder coating resists scratching $259 SP40110 1145w x 480d x 1030h (mm) TECH SERIES ROLL CAB $1995 SP42355D • Stainless steel worktop • Side storage compartment/bin • SP Cliklok drawer locking system • Internal locking system • Heavy duty castors2x lockable swivel • Side storage compartments 13 Drawer 1499 EACH OFF ROAD SERIES FIELD SERVICE BOX 7 DRAWER 890(W) x 510(D) x 615(H) APPRENTICE CASH $200 SP40322 Black SP40321 White AVAILABLE IN 2 COLOURS: APPRENTICE CASH $150 TRADIE CA$H $160 $1610 NORMALLY
9 SIMPLY PURCHASE AN 'APPRENTICE CASH' MARKED PRODUCT AND RECEIVE AN ONLINE VOUCHER TO SPEND AT WWW.SPTOOLS.COM ARE YOU AN APPRENTICE? REDEEMING IS QUICK AND EASY. SPTOOLS.COM FOR MORE INFORMATION Visit sptools.com for full terms & conditions. WORKSHOP SEAT 3 DRAWER 370(W) x 400(D) x 367(H) $135 KNEELING PAD • Reduces knee and lower back pain from kneeling on hard surfaces 550 x 320 x 22mm SPR30 $39 EAR PROTECTION • Class 5 32db protection for high noise applications 45 SPR-11 PNEUMATIC STOOL WITH SWIVEL TOP • Adjusts from 660 to 787mm $290 NORMALLY $199 SPR-60 • Heavy duty nylon • Easy slip-on design against oil, grease Protective 20 LITRE 40 LITRE SP040 SP020 BLOWER VACUUM WET DRY $289 $159 1400W SP040 • 40L stainless steel container • Wet and dry vacuum cleaner • Built-in easy drainage system • Swivel castors and large rear wheels provide ease of movement in any direction • 3m Hose (38mm Ø) 1250W SP020 • 20L Stainless steel container • Easily converts to power blower • Swivelling castors provide convenient multi-direction movement • Lightweight and compact • 1.5m Hose (32mm Ø) A CLEAN WORKSHOP IS A SAFE AND EFFICIENT ONE EQUIPMENT INCLUDED • Extension Wand • Floor Nozzle • Crevice Nozzle • Gulper Nozzle ON BOARD ACCESSORY STORAGE commercial wet & dry vacuum/blowers FAST BACK CREEPER HEAVY DUTY MECHANICS CREEPER $359 SPR-78 • Ultra stable three wheel configuration • 3” twin axis sealed bearing control caster • 7” dual bearing all terrain wheels 9 29 SPR88 $19 SP68874 WORKSHOP • Heavy duty steel frame • 6 heavy duty wheels • Padded body & head rest • 1030mm x 440mm $129 SPR-44 HEAVY DUTY FRAME SWIVEL CASTORS PADDED SEAT BALL BEARING SLIDE DRAWERS STOCK UP ON DISPOSABLE FILTER BAGS $169 NORMALLY $25 EACH packs of 3 020FB SUITS SP020 040FB SUITS SP040
• 12pt - 8 to 32mm • 12pt - 3/8 to 1-1/4” • Ratchet • Flex handle • Spark plug sockets • Universal joint • Extension bars 39PC 1/2”DR METRIC/SAE SOCKET SET $199 T820300 T820101 • 6 to 22mm • 1/4 to 7/8” • 45T Ratchet • Flex Handle • Spark Plug Sockets • Ext. Bar • Uni. Joint 12 PT 32PC 3/8”DR METRIC/SAE SOCKET SET $170 SP20200 FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT SPTOOLS.COM • Metric Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm • SAE Sockets: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 & 1” • 45T Ratchet Flex Handle - 200mm • Wobble Extension Bars - 125 & 250mm • Spark Plug Sockets - 5/8 & 13/16” 12 PT 26PC 1/2”DR SOCKET SET IN X CASE $170 SP20306 METRIC/SAE SOCKET SETS 12 PT 6 PT 12 PT • 1/4”: 4 to 22mm & 1/4 to 1/2” • 3/8”: 13 to 19mm & 9/16 to 3/4” • 1/2”: 21, 22, 24, 27, 30 & 32mm • 13/16 - 1-1/4” + ACCESSORIES 59PC 1/4”, 3/8” & 1/2”DR SOCKET SET • 12pt - 4 to 13mm • 12pt - 3/16 to 1/2" • Deep 6pt - 4 to 13mm • Deep 6pt - 3/16 to 1/2" • 72T Ratchet • Flex Handle • Extension Bars • Universal Joint $199 SP20101 43PC 1/4” METRIC/SAE SOCKET SET $299 SP20280 APPRENTICE CASH $30 • Metric, Hex, Torx & Spline Sockets • 90T Sealed Head Ratchet • Flex Handle • Extension Bars • Universal Joint 39pc 3/8”DR SOCKET SET • Metric, Hex, Torx & Spline Sockets • 90T Sealed Head Ratchet • Flex Handle • Extension Bars • Universal Joint 35pc 1/4”DR SOCKET SET $179 SP20116 $259 SP20216 METRIC, INHEX, TORX, SPLINE SOCKET SETS 6 PT 8PC 3/8”DR SPARK PLUG SOCKET SET 6 POINT - 6PC • 13, 14, 16, 18, 19mm & 13/16” 12 POINT - 2PC • 12 & 14mm SP20290 $99 6 PT 12 PT 12 PT • METRIC: 22, 24, 27, 30, 32, 36, 38, 41, 46 & 50mm • SAE: 7/8, 15/16, 1, 1-1/8, 1-3/16, 1-5/16, 1-3/8, 1-7/16, 1-5/8, 1-3/4, 1-7/8 & 2” 26PC 3/4"DR METRIC/SAE SOCKET SET $299 T820400 • METRIC: 4 to 13mm • SAE: 5/32 to 9/16” • Low profile ratchet • Chrome Vanadium • METRIC: 8 to 19mm • SAE: 1/4 to 3/4” • Low profile ratchet • Chrome Vanadium 23PC 1/4”DR METRIC/SAE SOCKET SET 22PC 3/8”DR METRIC/SAE SOCKET SET $129 SP20220 $99 SP20121 LOW PROFILE LOW PROFILE 12 PT ACCESS AREAS OTHER RATCHETS CAN'T. APPRENTICE CASH $15 LOW PROFILE APPRENTICE CASH APPRENTICE CASH $20 $30 APPRENTICE CASH $20 APPRENTICE CASH $35 32pc 3/8”Dr Metric/SAE Socket Set $169 SP20202 6 PT • METRIC: 6 to 22mm • SAE: 1/4 to 7/8” • Spark Plug Sockets • 45T Ratchet • Flex Handle • Extension Bar • Universal Joint 6 PT • 6pt - 4 to 13mm • 6pt - 7/32 to 1/2” • Ratchet • Flex handle • Spinner Handle • Universal joint • Extension bar + MORE 41PC 1/4”DR METRIC/SAE SOCKET SET $85 6 PT 10
SOCKET RAILS • METRIC: 8, 10 to 19mm + Pin punch • Twisted teeth dig in to rounded bolts/lug nuts to provide extreme grip for easy removal. • METRIC: 10, 12, 13, 14 & 18mm • Impact Deep Wheel Nut: 14, 17, 19, 21, 22 & 24 • Impact Extension Bars: 75 & 125mm 12PC 3/8”DR IMPACT TWIST SOCKET SET 14PC 1/2”DR TECH SERIES IMPACT SOCKET SET 9PC 1/2”DR DEEP INHEX IMPACT SOCKET SETS $179 $250 SP31260 SP50014 9pc METRIC • 4, 5, 6, 7, 8, 10, 12, 14 & 17mm SP20370 9pc SAE • 3/8 to 15/16 & 1" SP20375 9pc TORX • T20 to T70 SP20380 $159 EACH INHEX TORX TWIST $299 EACH 1/2”DR STD & Deep Impact SOCKET SETS COLOUR CODED • STD: 8 to 24, 26, 27 & 30mm • DEEP: 8 to 24, 26, 27 & 30mm SP20322 METRIC - 40PC • STD: 5/16 to 1-1/4 • DEEP: 5/16 to 1-1/4 SAE - 34PC SP20327 $83 12pc E-TORX • E4, E5, E6, E7, E8, E10, E11, E12, E14, E16, E18 & E20 3/8”DR E-TORX SOCKET RAIL SET SP20550 E TORX TORX E $69 $59 10pc METRIC • 4 to 13mm SP20140 9pc SAE • 3/16 to 1/2" SP20141 1/4”Dr DEEP Socket Rail Sets AVAILABLE IN METRIC & SAE 6 PT $109 12pc E-TORX • E4, E5, E6, E7, E8, E10, E11, E12, E14, E16, E18 & E20 3/8”Dr E-TORX Socket Rail Set SP20551 E TORX TORX E 6 PT $79 $72 12pc METRIC • 10 to 24mm SP20332 11pc SAE • 3/8 to 1" SP20333 1/2”Dr Socket Rail Sets AVAILABLE IN METRIC & SAE 7PC Spline - LONG • M4 - M10 (100mm) SP20544 SPLINE $69 $99 7PC Spline - SHORT • M4 - M10 (48mm) SP20543 3/8"DR SPLINE SOCKET RAIL SETS 5pc METRIC • 14, 17, 19, 21 & 22mm 1/2"DR WHEEL NUT IMPACT SOCKET RAIL SET AVAILABLE IN SHORT & LONG 12 PT $45 $39 10pc METRIC • 4 to 13mm SP20130 9pc SAE • 3/16 to 1/2" SP20131 1/4”Dr Socket Rail Sets AVAILABLE IN METRIC & SAE 6 PT 3/8”Dr SWIVEL Impact Socket Rail Sets 6 PT AVAILABLE IN METRIC & SAE 3pc METRIC • 17, 19 & 21mm 3/4"DR DOUBLE SQUARE IMPACT SOCKET SET 1”DR IMPACT SOCKET SETS 3/4”DR DEEP IMPACT SOCKET SETS SP20420 8pc METRIC 8pc SAE • 24, 27, 30, 32, 34, 36, 41 & 46mm • 1, 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16 & 1-1/2” SP20425 SP20510 9pc METRIC 9pc SAE • 27, 30, 32, 34, 36, 38, 41, 46 & 50mm • 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8 & 2” SP20515 HEAVY DUTY 3/4"DR RATCHET & FLEX HANDLE CHECK OUT OUR HEAVY DUTY 3/4"DR RANGE AT SPTOOLS.COM MODEL TYPE SIZE PRICE SP24305 RATCHET 475mm $199 SP24319 FLEX HANDLE 1000mm $139 SP24319 PICTURED 11
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT SPTOOLS.COM SPANNER SETS $279 6pc METRIC • 8 to 24mm SP10036 DOUBLE BOX RING EXTRA LONG SPANNER SET 0° OFFSET $259 4pc SAE • 3/8 to 11/16" SP10084 METRIC & SAE SET AVAILABLE 30PC METRIC/SAE QUAD DRIVE ROE COMBINATION SPANNER SET $349 SP10002 $119 11pc METRIC • 8 to 19mm SP10027 8pc SAE • 5/16 to 3/4" SP10077 METRIC & SAE SET AVAILABLE QUAD DRIVE ROE COMBINATION SPANNER SETS STUBBY SIZES 15° OFFSET $379 $379 10pc METRIC • 24 to 50mm T810020 10pc SAE • 15/16 to 2’’ T810070 METRIC & SAE SET AVAILABLE COMBINATION ROE RING END SPANNER SET METRIC & SAE SET AVAILABLE Double RING SPANNER SET 40° Offset $ $ 5pc SAE • 5/16 to 15/16" SP10185 6pc METRIC • 8 to 19mm SP10136 STANDARD SPANNER SP Tools patented QUAD DRIVE open end offers 4 times the gripping power of a standard ROE spanner by wrapping around the fastener and maximising the contact on the flat sides of the fastener head, not the points. NEW • DUAL FLAT DRIVE TECHNOLOGY The dual flat ring end design allows for maximum contact between the tool and fastener. The extra contact means the applied torque can be increased and risk of damage to the fastener is decreased. • Small head profile designed for working in confined spaces. • Chrome Vanadium Steel (Cr-V) for high durability. • METRIC :6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22 & 24mm • SAE:1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 & 1” 17PC METRIC QUAD DRIVE ROE COMBINATION SPANNER SET • 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22 & 24mm 15° OFFSET $179 SP10017 APPRENTICE CASH $20 $209 9pc METRIC • 8 to 26mm SP10429 DOUBLE RING LONG SPANNER SET APPRENTICE CASH $25 Metric • 6, 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22 & 24mm SAE • 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 & 1” $149 T810004 COMBINATION ROE METRIC/SAE SPANNER SET 27 PIECE APPRENTICE CASH $15 12
GEAR DRIVE RING OPEN END QUAD DRIVE SPANNER SETS • 8, 10, 12, 13, 14, 15, 17, 18 & 19mm 9PC METRIC SP10109 $249 • 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 & 3/4” 8PC SAE SP10158 $229 $365 $ 11pc METRIC • 8 to 19mm SP10311 8pc SAE • 5/16 to 3/4" SP10358 METRIC & SAE SET AVAILABLE FLEX HEAD GEAR DRIVE ROE QUAD DRIVE $269 $ 8pc METRIC • 8 to 19mm SP10628 6pc SAE • 5/16 to 3/4" SP10676 METRIC & SAE SET AVAILABLE GEAR LOCKING FLEX HEAD BOX DOUBLE RING REVERSIBLE TEETH MODEL DRIVE PRICE SP18053 100mm $30 SP18058 150mm $36 $120 SP18093 15” Construction Adjustable Wrench $279 11pc METRIC • 8 to 19mm SP10111 GEAR DRIVE ROE QUAD DRIVE SPANNER SET APPRENTICE CASH $30 • Slugging /Slogging / Striking Spanners designed for use with a sledgehammer or pneumatic hammers for heavy mechanical applications. MODEL SIZE SP19430 30mm SP19432 32mm SP19436 36mm SP19438 38mm SP19441 41mm SP19450 50mm SP19455 55mm SP19460 60mm SP19465 65mm $ SP19470 70mm $ SP19475 75mm $ SP19480 80mm $ SP19485 85mm $ SP19490 90mm $ SP19495 95mm $ SP19500 100mm $ SLOGGING SPANNERS $30 FROM SIMPLY PURCHASE AN 'APPRENTICE CASH' MARKED PRODUCT AND RECEIVE AN ONLINE VOUCHER TO SPEND AT WWW.SPTOOLS.COM ARE YOU AN APPRENTICE? APPRENTICE CASH REDEEMING IS QUICK AND EASY. VISIT OUR APPRENTICE PAGE AT SPTOOLS.COM FOR MORE INFORMATION Visit sptools.com for full terms & conditions. 13
SPTOOLS.COM CORDLESS 12 VOLT 16 VOLT 18 VOLT 12V MECHANICS KIT $499 SP82148 KIT INCLUDES: 12V IMPACT WRENCH 10PC IMPACT SOCKET SET 12V DRILL DRIVER 19PC HSS METRIC DRILL BIT SET 2x batteries and charger A C B D E 12v 3/8”Dr Mini IMPACT WRENCH KIT KIT INCLUDES: • 12v Mini 3/8’’Dr Impact Wrench • 10pc Metric Impact Socket Rail Set • 2x 2.0Ah Max Lithium Battery Packs • 12v Charger 105Nm TORQUE 2200RPM SPEED $299 SP81114 54Nm TORQUE 250RPM SPEED 12v 3/8”Dr Mini Ratchet Wrench • Includes 1x 2.0Ah battery & charger 970Nm BOLT BUSTING TORQUE 2200RPM NO LOAD $299 SP81614B THE PERFECT KIT TO COMPLIMENT ANY WORKSHOP INCLUDES 10PC METRIC SOCKET RAIL 2.0AH BATTERIES + CHARGER INCLUDES 10PC METRIC SOCKET RAIL 16V INDUSTRIAL GREASE GUN • 750mm ultraflexible hose • 450cc cartridge size • 70g/min flow rate • Multiple loading options (cartridge, bulk & suction) • Non-slip finish $349 SP81513 INCLUDES 1X 2.0AH BATTERY PACK & CHARGER 6000 PSI $429 SP81120 • No-Load Speed: 2300rpm EXTREME TORQUE 392Nm Patented “V” Type Hammer. Low Vibration 16v 3/8” BRUSHLESS IMPACT Wrench Kit • Pad size: 50mm (2”) w/ 6.35mm (1/4") thread • Powerful motor • Includes 2x 2.0Ah battery & charger $345 SP81352 8000RPM SPEED 16v GASKET SANDER L: 370RPM 2 SPEED H: 1570RPM 32Nm TORQUE 18v Brushless 2 Speed Drill Driver INCLUDES BATTERIES & CHARGER • 10 selections clutch torque control PRESSURE 10,000PSI FLOW RATE HIGH: 280g p/m LOW: 100g p/m INCLUDES 1X 2.0AH BATTERY & CHARGER $699 SP81523 18v INDUSTRIAL GREASE GUN 18v 1/2” BRUSHLESS IMPACT Wrench Kit SP20390 BONUS 1/2"DR IMPACT WHEEL NUT SOCKET SET INCLUDES 2X 5.0AH BATTERIES & CHARGER • Variable speed switch with brake • Powerful brushless motor • Compact designOnly 169mm long (Including anvil) $749 SP81134B INDUSTRY LEADER $499 SP81235 INCLUDES 10PC METRIC SOCKET RAIL & 2X 2.0AH BATTERIES + CHARGER A C B D E BONUS SOCKET RAIL SP20250
SIMPLY PURCHASE AN 'APPRENTICE CASH' MARKED PRODUCT AND RECEIVE AN ONLINE VOUCHER TO SPEND AT WWW.SPTOOLS.COM ARE YOU AN APPRENTICE? APPRENTICE CASH REDEEMING IS QUICK AND EASY. VISIT OUR APPRENTICE PAGE AT SPTOOLS.COM FOR MORE INFORMATION Visit sptools.com for full terms & conditions. 15 INSULATED Crimping Tool and Wire Strippers • 225mm (8.8”) Automatic wire stripper with crimper features • 4.0mm Insulated & Open Barrel • Terminal Crimper • Wire cutter: 1.25, 2.0 & 5.5mm • ISO: M2.6, M3, M3.5, M4, M5, • Wire stripper: 0.75, 0.9, 1.25, 2.0, 3.5, 5.5mm • Non contact measurement of RPM • RPM range 2.5–99,999 • Memory function • 50mm–2000mm range with reflective tape Laser Actuated Tachometer Automatic Wire Strippers • Insulated: AWG: 10-22 (0.5-6mm²) • Non Insulated: AWG: 12-10, 16-14, 22-18 (4-6, 1.5-2.5, 0.51mm²) • 200mm (8”) • Crimper features • Strips and cuts cable or wire 24-10 AWG (0.2 to 6.0mm) Mechanics Stethoscope • An essential diagnostic tool for fault finding in vehicle engines and engine bays, under-body, transmissions, differentials & bearings $40 SP62001 Infrared Laser Guided Thermometer • Dual laser technology (twin dots) • Rapid detection function • Automatic data hold • Emissivity digitally adjustable from 0.10 to 1.0 $239 SP62020 APPRENTICE CASH $25 GAS SOLDERING/ TORCH KIT INCludes: + HEAT SHRINK FUNCTION $99 SP32290 • Refillable butane gas soldering iron • Lead free soldering wire in dispenser • Cleaning sponge • Heat insulated protective head cap • Deflector attachment • Standard Tip • Anvil Tip • Chisel Tip • Knife Tip • Needle Tip KIT INCLUDES: • Soldering Iron • Cone Soldering Tip • Chisel Soldering Tip • Heat Shrink Attachment • Cleaning Ball & 15g Solder • DC Charger ADDITIONAL ACCESSORIES AVAILABLE SEPERATELY HOT STAPLE TIP 3 DIRECTION 49 SP32296 HOT KNIFE TIP 90W rechargeable li-ion battery 700° (1292° F) IN UNDER 10 SECOND S 50 MINUT E CONTINUOUS RUN TIM CORDLESS POWER SP32295 $179 T832294 HEAVY DUTY STORAGE CASE INCLUDED 7.6V $559 NORMALLY
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT SPTOOLS.COM ELECTRICAL & DIAGNOSTICS The SP Smart Tool is a multi-function Android tablet based scan tool with an easy to use and understand user interface, capable of running sophisticated whole system diagnosis on more than 100 car brands from Europe, America, Asia and China and offers support to more than 20 common maintenance special functions, CAN FD, DoIP and various diagnosis protocols. The built-in printer allows technicians to print out hard copies of test reports on the go and the massive 64GB of on-board storage allows users to save test reports for later viewing and comparison. Multi function smart tool with wifi & built-in printer SUPPORTS THE FULL SYSTEM AND FULL FUNCTION DIAGNOSIS OF MORE THAN 100 CAR BRANDS AROUND THE WORLD (OPTIONAL) TPMS DIAGNOSE PRINTING VIDEOSCOPE (OPTIONAL) * TPMS BATTERY DIAGNOSE PRINTING VIDEOSCOPE (OPTIONAL) * TPMS BATTERY DIAGNOSE PRINTING VIDEOSCOPE (OPTIONAL) * TPMS BATTERY DIAGNOSE PRINTING VIDEOSCOPE $2999 SP61170 for more information BATTERY ANALYSER TYRE PRESSURE MONITORING SYSTEM DIAGNOSE VEHICLE ELECTRONIC CONTROL UNITS VEHICLE MAINTENANCE OPTIONAL VIDEOSCOPE SMart videoscope ALso available for the smart tool Forward and side facing cameras allows technicians to quickly and easily inspect engine and vehicle components, without major disassembly $199 SP61173 E DIGITAL MULTIMETER WITH TEMP GAUGE • 2000 counts digital display • Safety Design Cat 3 600v • Non-contact ACV detection • Data hold • Auto ranging • Type K temperature input • Continuity, diode test, resistance • Auto power off with low battery indicator • Pocket sized $89 SP62015 CAN OBDII/EOBD/JOBD LIST OF COMPATABLE VEHICLES & MORE INFO AT WWW. SPTOOLS.COM • Covers all OBDII compliant vehicles: Made in USA from 1996 on; Made in Europe petrol 2001 on & diesel 2004 on; Made in Australia or New Zealand from 2006 on. (Including the CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000 protocols) $235 SP61155 READS & CLEARS GENERIC & MANUFACTURER SPECIFIC DIAGNOSTIC TROUBLE CODES (DTC’S) & TURNS OFF CHECK ENGINE LIGHT. KIT INCLUDES: PROBE TEST LEADS (STANDARD TO BANANA PLUG) K-TYPE TEMPERATURE PROBE Tachometer Digital • Laser target • LCD display with backlight • Range: 100-30000rpm, 1.7-500rps • Protective cover & carrying case • Auto power off • Accuracy: +/-0.1% $199 SP62032 APPRENTICE CASH $20 $69 SP61018 3 to 30v $299 SP61065 Premium Battery ANALYSER WITH BUILT-IN PRINTER • Auto-saving function ensures the latest test results are automatically saved for reviewing • Tests batteries & charging/starting systems • Easily adjustable date/time printing mode • Circuit protection DELUXE BATTERY CHARGE & CRANKING SYSTEM TESTER • Test the battery CCA and the state of health • Test cranking system and charging system of vehicles without damaging the battery performance • Display: Backlit LCD screen • Operating Temperature: Temperature: -20 to 70°C • System voltage: 12 volts • Input voltage range: 8v-30v $89 SP61063 40% OFF 16
BATTERY ESSENTIALS NEW MODEL OUTPUT CAPABILITY PEAK AMPS PRICE SP61093 7L Petrol 5L Diesel 2000A $299 SP61095 9L Petrol 7L Diesel 3000A $399 4 OPTIONS AVAILABLE MODEL CURRENT OUTPUT OUTPUT VOLTAGE (Nom) PRICE SP61075 3.5 Amp 6 & 12 Volt $99 SP61078 6 Amp 6 & 12 Volt $139 SP61084 15 Amp 6, 12 & 24 Volt $249 SP61086 26 Amp 6, 12 & 24 Volt $319 $99 FROM SMART BATTERY CHARGERS 8 STAGE MULTI-VOLT • Zero volt minimum start – can charge a completely flat battery • Built-in microchip charging control and monitoring system LEAD ACID • GEL • AGM • LITHIUM $795 SP61097 $299 FROM JUMP STARTERS 12V • Jump start dead batteries on cars, SUV’s, trucks and boats in seconds • Onboard powerful Lithium-Ion battery holds charge longer • Doubles up as a portable powerbank, allowing you to charge or power smart phones, tablets and any similar 5v devices on the go • High power LED flashlight with strobe & SOS flash patterns • Back-lit LCD screen for poorly lit areas and late night use • Built in battery management system • Reverse polarity & low voltage protection • Built-in over charge/discharge circuit protection • Includes heavy duty storage case Compact, high density 4,300A portable jump starter and power bank, capable of supplying a huge amount of power in a very short time to start all 12V petrol engines, 12v diesel engines up to 10 litres and 24V diesel engines up to 6 litres. • Large capacity onboard Lithium-ion power bank allows you to power or charge your low voltage smartphones, tablets and similar USB devices on the go. HOUSED IN SLIMLINE HEAVY DUTY STORAGE CASE TWO MODELS AVAILABLE SP61095 12V 3000A PETROL DIESEL 9L 7L SP61093 12V 2000A PETROL DIESEL 7L 5L FLASHLIGHT 12V/24V JUMP STARTER PEAK AMPS 4300A JUMP S TART Jump start all 12V petrol engines, 12v diesel engines up to 10L and 24V diesel engines up to 6L LIGHT STRIP Five light modes, including emergency strobe and SOS POWER BANK Power or charge low voltage smartphones, tablets and similar USB devices on the go. NEW MAY RELEASE SOLID | STROBE | SOS 17
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT SPTOOLS.COM DUAL LIGHT COB LED SLIMLINE HEADLAMP WITH SPOT LIGHT • High power Osram P8 LED spot light with adjustable focal point and 2 brightness settings • Ultra bright, ultra wide 5w COB LED Floodlight with 2 brightness settings • 230° wide angle LED beam illuminates your entire field of view • Both floodlight and spot light can be activated at the same time • Ultra lightweight, sleek, slim, low profile design • Adjustable headband with non-slip grip Battery charge indication ILLUMINATES ENTIRE FIELD OF VIEW NEW NEW NEW NEW $19 SP81439 • Compact lightweight design • Strong magnetic clip • Rechargeable Lithium Ion • Overall Length: 180mm • Width: 20mm LED PEN MAGBASE TORCH/WORK LIGHT LUMENS 130 TORCH LUMENS 50 TORCH MAG BASE DIMMABLE RECHARGEABLE Li-Ion BASE 180° PIVOTING MAG BASE DIMMABLE RECHARGEABLE Li-Ion BASE 180° PIVOTING $139 SP81467 18
• Swivels in full 360° • 45° angle for easy access • Working pressure: 4,500psi $25 SP65135 • Quick release grease coupler - 74mm • Quick release grease coupler - 130mm • Needle nose grease dispenser • Seal-off grease dispenser • Grease injector needle • Right angle adaptor COUPLER & ACCESSORY KIT 6 PIECE $179 SP65140 HOUSED IN HEAVY DUTY BLOW MOULD STORAGE CASE Right Angle Coupler $20 SP65132 Heavy Duty Coupler $15 SP65131 $50 SP65136 Multipurpose Pump 1 LITRE • Ideal for topping up difficult to access oiling points on motor vehicles, lawn mowers, chain saws, outboard and two stroke motors, and other odd jobs around the workshop and home $35 SP65155 $40 SP65120 OIL SUCTION PUMP • Perfect for removing or replacing oil in: engines, transmissions, differentials, gearbox sumps & crankcases • Enables easy access to awkward locations & ideal for vehicle & machinery use • No priming necessary • 10’’ Flexible hose • 500ml capacity • L shape design allows for increased flexibility • 360° rotating chuck • Gauge: 2.5” DIAL TYRE Pressure GAUGE BEST 4X4 tyre gauge and deflator on the market $125 SP65508 SCORPION TYRE INFLATOR • 80mm Dial Gauge • 400mm Hose • 0-170PSI • Nitto Style Fitting Included 25 S-850 • Flow: 1L/ stroke • Mounting: 2” MNPT bung adapter • Outlet: 1” O.D. curved spout • Maximum viscosity: 500 SSU or SAE 30 SP TOOLS IS NOW ON TIKTOK! MAKE SURE YOU FOLLOW US TO STAY UP TO DATE WITH ALL THINGS SP TOOLS PROFESSIONAL TYRE INFLATOR WITH DEFLATOR DUAL HEAD CONVEX LENS $179 SP65900 Ideal for automotive, industrial and trade use • Fast inflation • Heavy duty aluminium body • Pressure measuring range: 0-150 PSI | 0-10 Bar | 0-1050 Kpa TRADIE CA$H $40 TRUCK WHEEL OIL SEAL PULLER • Quick & easv removal of truck hub oil seals • Prevents damage to the bearing and hub • 28" (710mm) handle $199 SP66001 APPRENTICE CASH $20 $449 NORMALLY 19
FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT SPTOOLS.COM $139 1/2”DR IMPACT WRENCH $249 SP-1146B • Bolt Busting Torque: 850Nm • Ideal for the automotive and tyre industry • 4 torque settings • Heavy duty body • Reversible • Ergonomic rubber grip handle • Features our brand new 8 vane motor • Pin type hammer • 4 Torque settings 3/4”DR IMPACT WRENCH 3/8"DR KEYLESS REVERSIBLE DRILL 149 • Free Speed: 2,200RPM • Length: 175mm • Geared keyless chuck (2 gear, caged) • High quality aluminium body 179 SIZE ANVIL MEDIUM EXTENDED $15 SP910A $21 MOL-21 1”DR IMPACT WRENCH INDUSTRIAL HEAVY DUTY • Bolt Busting Torque: 3500Nm • Max Torque: 2990Nm • Working Torque: 1350Nm • Length: 480mm • Capacity: 45mm • Weight: 11.78kg • Air consumption: 1130L/min Max • Ideal for industrial applications • Induction hardened, industrial single dog hammer mechanism SPECIFICATIONS FEATURES IMPACT WRENCHES OFFICIAL TOOL PARTNER OF THE WBR RACING TEAM 20 +BONUS 1/2"DR WHEEL NUT IMPACT SOCKET RAIL SET 1/2”DR IMPACT WRENCH • Bolt Busting Torque: 1140Nm • 4 torque settings • Forward/reverse 359 SP-1140EX also available WITH Long anvil $395 SP-1140EXL NEW Angle Grinder AUTOMOTIVE • Free Speed: 11,000RPM • Capacity: 125mm • Length: 225mm $199 SP-2257 • 1/4”BSP inline oiler 1/4” BSP MALE/FEMALE UNIVERSAL SWIVEL MINI LUBRICATOR • Free Speed: 200rpm • Max Torque: 61Nm 3/8" SP-1139 1/2" SP-1139-2 RATCHET WRENCH AVAILABLE IN 3/8" & 1/2" $145 EACH APPRENTICE CASH $15 TRADIE CA$H $55 TRADIE CA$H $20 TRADIE CA$H $45 SP20390 $825 NORMALLY $285 NORMALLY
1/8" Micro Air Grinder Free speed: 70,000rpm • Length: 156mm $199 SP-1900 KIT INCLUDES • 50mm (2”) Gasket Sander • 4x Surface Prep Discs (Medium Grit) • 8x Surface Prep Discs (Coarse Grit) • 4x Sanding Discs (#120 Grit) • 4x Sanding Discs (#80 Grit) • Housed in heavy duty blow mould storage case SANDER FEATURES • Free Speed: 16,000RPM • Capacity: 50mm • Thread size: 6mm x 1.25mm Pitch • Multiple speed settings • Lightweight composite body 2” (50mm) GASKET SANDER KIT $199 SP-2331H $199 SP-2370 INDUSTRIAL CHISEL GUN ACCESSORIES AVAILABLE • Ideal for general cutting, body panel crimping, shearing, rust/paint removal, chipping and scraping. SPECIFICATIONS • Chisel shank size: 10mm • Blows per minute: 3000 • Length: 216mm • Weight: 2.18kg $199 SP-1401 $27 $27 $27 $27 $10 CHI-SP1 WIDE SCRAPER 50 X 170mm FLAT BLADE 20 X 170mm PANEL CUTTER 170mm RIVET & BOLT CUTTER 20 X 170mm CHISEL SPRING RETAINER STANDARD CHISELS FULL RANGE OF CHISELS TO SUIT SP-1400 • Ideal for commercial applications • Full brass non-return valve • Copper delivery pipe • 200mm (8”) solid rubber wheels • One-touch (Nitto style) connector Twin Cast Iron Industrial AIR Compressors 60 LITRE TANK 2.5 HP 10 AMP 260L/MIN FAD $999 SP14 60 LITRE TANK 3 HP 15 AMP 318L/MIN $1199 SP17 • Lightweight & high trade quality • 200mm (8”) solid rubber wheels • One-touch (Nitto style) connector 2.5HP PORTABLE TRADE QUALITY AIR COMPRESSOR DIRECT DRIVE 3 50 LITRE TANK 2.5 HP 10 AMP 260L/MIN FAD $599 SP12-50X Air Compressor Rating in accordance with AUSTRALIAN STANDARD AS 4637-2006 DON'T BUY AN INFERIOR PRODUCT Morris Finance Ltd: ABN 70 083 630 139 Australian Credit Licence: 395 249 - *Weekly payments for the Tools of the Trade payment plans are based on approximately $1000 investment financed over 4 years. These payments are an indication only and variables such as loan type, applicant profile and current interest rates are not taken into account. Exact payments will be provided on application. For approved applicants only, terms and conditions apply. SP EASY CREDIT CAN HELP YOU FINANCE YOUR SP TOOLS PURCHASE OVER THE COMBINED VALUE OF $1000 AND REPAYMENTS START FROM AS LITTLE AS $8 PER WEEK*. APPLY NOW AT SPTOOLS.COM REPAYMENTS START FROM ONLY $8 PER WEEEK OWN QUALITY TOOLS AND EQUIPMENT TODAY AND PAY THEM OFF WEEKLY! 21 3 MODEL HP TANK FAD PRICE SP18 3 60L 385L/min $1295 SP1800 3 100L 385L/min $1539 BELT DRIVE 3HP Triple Cast Iron Portable Air CompressorS 15AMP • Ideal for commercial applications • One-touch (Nitto style) connector 3 • Built tough & compact • The ultimate builders companion • Top handle 2.5HP PORTABLE AIR COMPRESSOR TRADE QUALITY 2x 8L TANKS 2.5 HP 10 AMP 182L/MIN FAD $569 SP12-16X APPRENTICE CASH $60 TRADIE CA$H $25 $299 NORMALLY
• Securely holds the timing gear during removal or installation • Prevents timing gear movement while the retaining bolt is removed • Allows rotation of cam gear to align valve timing marks • Single lever looking design is easy to use SP70907 $199 TIMING GEAR HOLDER/ SINGLE CAM CLAMPS KIT FROM $29 Cam Clamp SetS ALSO AVAILABLE SEPERATELY • Use on single, twin and quad cam engines to hold valve timing during belt replacement • Low profile design works on engines with gear to cylinder head clearances from 5mm (1/4”) to 35mm (1-3/8”) disassembly MODEL PIECES PRICE SP70902 2pc Set $39 SP70905 4pc Set $82 ENGINE REPAIR Diesel Injector Seat Cleaner Set 7 PIECE • Set of five diesel injector seat cleaners, centering pilot and t-handle • Centring pilot: 7mm • Various vehicles: 15mm • Delphi/Bosch injectors: 17 x 17mm (BMW, PSA, Renault, Ford) • Bosch injectors: 17 x 19mm (Mercedes CDI) • Angled: 17 x 17mm (Mercedes CDI) • Angled: 17 x 21mm (Fiat, Iveco) $179 SP66084 PETROL • 2.5’’ gauge with dual scale, • Pressure relief valve allows • Includes multiple adaptors Compression Tester $229 SP66027 Cylinder Leak Detector & Crank Stopper • Crank stopper locks engine in place to facilitate installation of timing belts & removal of harmonic balance pulleys • Gauges show % of cylinder leakage & cylinder pressure • The jaws grip the valve spring in parallel compression • Suits cars and light trucks VALVE SPRING COMPRESSOR SCREW TYPE OVERHEAD • Universal jaw with 75 to VALVE SPRING COMPRESSOR $49 SP66014 $50 SP66012 $129 18pc 3/8”Dr Oil Drain Plug Key Set • Remove & replace drain plugs in hard to reach areas on diffs, gearboxes & engine sumps MULTI DRAIN Tubs/Pans • For use when changing engine oils, transmission oils etc • Resistant to chemicals such as oil, antifreeze and solvents • Heavy wall construction stays rigid even with hot oil • Built-in pouring spout SIZE DIMENSIONS PRICE 8L 520x390x150mm $29 16L 600x450x180mm $35 $29 FROM OFFICIAL TOOL PARTNER OF 22 DIESEL Compression Tester SET - DELUXE • Suits direct & indirect diesel injected cars • Checks engine compression under cranking conditions • Flexible hose (355mm) gives access to restricted plug & injector ports • Dual scale 80mm gauge 0-1000 psi and 0-70 Bar $359 SP66038 APPRENTICE CASH $40 APPRENTICE CASH $20 TRADIE CA$H $25
• Used for removal & re-fitting tank sender moulding rings • Range: 75-160mm Diameter • Use with a 24mm Spanner Socket $30 SP64067 • Easy clip over design • Simple push under • 5/16”, 3/8”, AC & FUEL LINE DISCONNECT SET $10 SP64050 DIESEL INJECTOR EXTRACTOR AND COMMON RAIL PULLER KIT • Suitable for fast and safe removal, inspection or replacement of Bosch, Delphi, Denso and Siemens diesel injectors. • Set includes heavy duty slide hammer, 1/2”Dr deep open profile sockets, used to dismantle injectors, plus adaptors for attaching the slide hammer securely to the body of the injector. • Window in socket allows the wires attached to the sensors to be bypassed, eliminating wire damage $159 SP66082 • Offset blades 100mm (L) x 13mm(W) with 25mm offset tips $19 SP64031 • 0.008” – 0.026” • Marked with equivalent metric sizes • Offset blades 100mm long x 13mm wide with 25mm offset tip FEELER GAUGE SET 12PC OFFSET $15 SP64036 • 0.0015” – 0.035” • Marked with equivalent metric sizes • Straight blades 85mm (L) x 13mm (W) FEELER GAUGE SET 32 PIECE $19 • Suits oil filters • 1/2” Square Oil Filter Wrench 3 PRONG REVERSIBLE $39 SP64000 Oil Filter Wrench SPECIALISED OIL FILTER WRENCHES SUITS: Mercedes Benz & Smart Car 27MM X 3/8”DR SP71116 SUITS: Toyota & Lexus 6 & 8 Cylinder, Toyota: 2007-2008 V6, Corolla-(2007-2009) 4cyl, Tundra-(2007) 8cyl, Sequoia-(2008) 8cyl, Land Cruiser-(2008-2010) 8cyl, 4Runner-(2008-2010) 4&6Cyl, Lexus: (2006) - All vehicles, (2007) ES350, GS350, GS450h, LS460, RX350, (2008) LS600h L, (2009) LX570 64.5MM X 3/8”DR SP71113 SUITS: GM Opel/Vauxhall 4 cyl, GM 2.2liter ecotech X10XE, X12XE, Y17DT, Y17DTL engines, Mercedes HGV’S e.g. OM364 & OM366 engines. 32MM X 3/8”DR SP71111 SUITS: Mercedes diesel engines OM604,OM605 & OM606, BMW engines M52 6 cyl, M60 8 cyl & M70 12 cyl, Mini One, Ford 6.0 litre diesel engine (predominantly used in pickups) & Volkswagen VR6 engine. 36MM X 3/8”DR SP71118 SUITS: BMW & Volvo BMW: 335i 3.0L Twin Turbo, 535i 3.0L Twin Turbo, 3 Series (E90) & X6 3.0L Twin Turbo Volvo: All Models (1999 - 2008) excl. 2005 40 & 50 Series 86.6MM X 3/8”DR SP71117 SUITS: Hyundai, Kia, Land Rover, Range Rover & Jaguar 88.8MM X 3/8”DR SP71115 SUITS: Audi, BMW, Ford, Mazda, Toyota, VW, Porsche, Ford Focus (2004-2006) & Mercedes Benz - V6 & V8 74.2MM X 3/8”DR SP71108 SUITS: Toyota 4 cylinder (1800cc - 2000cc). Allion, Auris, Corolla Axio,Corolla Fielder, Corolla Rumion, Isis, Ist, Noah, Premio, Prius, Voxy 64.5MM X 3/8”DR SP71110 $33 $59 $45 $55 $35 $45 $33 $24 SIMPLY PURCHASE AN 'APPRENTICE CASH' MARKED PRODUCT AND RECEIVE AN ONLINE VOUCHER TO SPEND AT WWW.SPTOOLS.COM ARE YOU AN APPRENTICE? APPRENTICE CASH REDEEMING IS QUICK AND EASY. VISIT OUR APPRENTICE PAGE AT SPTOOLS.COM FOR MORE INFORMATION Visit sptools.com for full terms & conditions. 14 PIECE • Adaptor: M14 x 1.5 - Delphi • Adaptor: M17 x 1 - Bosch • Adaptor: M20 x 1 - Denso • Adaptor: M24 x 1 - Siemens • Adaptor: M27 x 1 - Siemens • Adaptor: M27 x 1.0 for Bosch injector nozzle • Adaptor: Puller W/M14 x 1.5P • 4pc 6 Point Injection nozzle sockets: 25, 27, 29 & 30mm (100mm Long) INCLUDES 23 APPRENTICE CASH $20
PLIERS HIGH LEVERAGE 3pC Plier & Cutter SET • Forged chrome Vanadium (Cr-V) Steel blades • Combination Pliers • Long Nose Pliers • Diagonal Cutters 200 mm (8") $99 SP32903 CURVED JAW SET - 3pc • Non-slip curved jaws INCLUDES • 150mm (6") • 200mm (8") • 250mm (10") SHEET METAL LOCKING PLIERS SP32640 $35 200mm WELDING CLAMP LOCKING PLIERS SP32645 $29 • Non -slip serrated edge blades • Ideal for multiple applications, from thin wire to Kevlar® AVAILABLE IN 2 OPTIONS MODEL BLADE TYPE SP32267 Rounded Tip SP32266 Safety Tip $19.99 Industrial Shears/Scissors 180 mm (7") 175 mm (7") $75 SP32932 MODEL TYPE SP32261 RIGHT CUT SP32262 STRAIGHT CUT SP32263 LEFT CUT COLOUR CODED AVAILABLE IN 3 OPTIONS 250mm (10") $20 EACH 4PC CIRCLIP Plier SET • Suitable for installing and removing external and internal retaining clips • Slim jaws for optimum access • Chrome Vanadium Steel (Cr-V) for high durability • Spring loaded ergonomic handles with non-slip cushion FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT SPTOOLS.COM Plier/Cutter SET VDE INSULATED 3 PIECE • Chrome Vanadium (Cr-V) blades • Insulated grip handles – 1000V VDE INCLUDES • Combination 200mm (8") • Long Nose Pliers 200mm (8") • Diagonal Cutters 180mm (7") $99 SP32909 Screwdriver & PlierS KIT VITAL EQUIPMENT FOR ANY ELECTRICIAN'S KIT • 8pc Screwdriver Set • Combination Pliers - 200mm (8") • Long Nose Pliers - 200mm (8") • Diagonal Cutters - 180mm (7") • Multigrip Pliers $229 SP55910 $69 SP34041 VDE INSULATED SCREWDRIVER SET 8 PIECE • VDE - Insulated handle & blade • Safe for applications up to 1000VAC /1500VDC • Magnetic tip for greater fastener control INCLUDES • 4 x Slotted - 3.0 x 100mm, 4.0 x 100mm, 5.5 x 125mm & 6.5x150mm • 4 x Phillips#0 x 75mm, #1 x 75mm, #2 x 100mm & #3 x 150mm Screwdriver Set VDE INSULATED 2 PIECE • VDE - Insulated handle & blade • Safe for applications up to 1000 V AC / 1500V DC INCLUDES • Phillips - 2x100mm • Slotted - 4x100mm $19 SP34043 24 CUTTING $149 NORMALLY SIZES: • 250mm • 300mm 3PC LONG HANDLE Plier Cutter SET • Long reach 275mm long pliers - ideal for reaching where standard pliers will not $99 SP32905
$149 SP39620 259 SP39625 60PC PROFESSIONAL BIT SET • Specialised range of bit types and lengths • Spring loaded ball bearings hold bits firmly in place • Chrome Vanadium Steel (S2) for maximum strength and durability 1/4", 3/8" & 1/2"DR hex & torx socket bit set 84 Piece MULTIDRIVE METRIC/SAE 9PC KEY SETS - Long Series AVAILABLE IN METRIC, SAE & TORX METRIC SAE TORX • 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10mm • 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16 & 3/8” • T10, T15, T20, T25, T27, T30, T40, T45 & T50 SP34501 SP34502 SP34507 BALL DRIVE ON METRIC & SAE SETS $36 EACH SCREWDRIVERS MODEL TYPE SIZE PRICE SP30274 Black 454g / 16oz / 1lbs $16 SP30276 Black 680g / 24oz / 1.5lbs $20 SP30275 White 454g / 16oz / 1lbs $16 8pc GO-THRU SCREWDRIVER SET IN X-CASE • Go-thru with steel strike cap for use with a hammer to loosen stubborn screws • Hex shafts and hex bolster collars • 4 x Slotted • 4 x Phillips $135 SP34020 22pc SCREWDRIVER SET IN X-CASE • 6 x Slotted • 2 x Go-Thru Slotted • 3 x Precision Slotted • 6 x Phillips • 2 x Go-Thru Phillips • 3 x Precision Phillips $119 T834025 CONTENTS • 3 x Slotted - 2.0 x 50, 2.4 x 50 & 3.0 x 50mm • 3 x Phillips - #000 x 50, #00 x 50 & #0 x 50mm 6 PIECE SCREWDRIVER set PRECISION $30 SP34005 25 • 10mm Dr Inhex Shank 30mm(L) Bits • 10mm Dr Inhex Shank 75mm(L) Bits Adapters • 10mm Inhex Bit Adapters • 1/2”Dr x 14mm Inhex Bit Adapter • Inhex Buffer Adapter 71PC 1/4"Dr Bit Set Hexagon, Phillips, Pozidrive, Square Slotted, Spanner, Torx Star, Tamper Torx, Torx Plus, Spline Bits, Universal Bit Holder and Adaptors $95 SP39511 13PC KEY SETS JUMBO MAGENTIC AVAILABLE IN METRIC & SAE METRIC SAE • 2, 2.5, 3, 4, 5, 6, 7, 8, 10, 12, 14, 17 & 19mm • 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 1/2, 9/16, 5/8 & 3/4’’ SP34528 SP34529 13pc SCREWDRIVER SET • 8 x Slotted • 5 x Phillips $29 T834000 NEW • 6 x Slotted • 6 x Phillips • SVCM steel shafts for strength and durability 12 pIECE SCREWDRIVER SET IN EVA FOAM JAPANESE INDUSTRY STANDARD J.I.S $145 SP34003G APPRENTICE CASH $20 8pc TORX SCREWDRIVER SET IN X-CASE • T8, T10, T15, T20, T25, T27, T30 & T40 • Essential in the removal of Torx Tamper proof safety screws • Chrome Vanadium Steel (SVCM) shafts $95 SP34050 APPRENTICE CASH $10
BRAKE FLUID MOISTURE TESTER • For easy compression of brake piston • Suits front disc brakes on most cars and light trucks. $19 SP63002 • Overall length: 130mm (5”) • Ideal for removing/ installing or carrying out brake lining adjustment on drum brakes in confined spaces $10 SP30828 • Aids in probing brake drum brake backing plates during adjustment • Suitable for screw and start type adjusters. • Accurate measurement of the amount of brake lining that is left without guess work 8PC BRAKE GAUGE SET COLOUR CODED • Red: 2mm, 3mm (Pads must be replaced) • Yellow: 4mm, 5mm, 6mm (Replacement suggested) • Green: 8mm, 10mm, 12mm (Good condition) $30 SP63006 BRAKE & CLUTCH $36 SP66050 • Knurled nut controls • Range 19mm to 64mm • Fitted with 28mm medium grit stones • Adjustable tension • Flexible Shaft $32 SP63036 $26 SP63041 TUBE CUTTER - 3 TO 22mm • Ideal for cutting hard and soft copper, aluminium, brass and plastic tubing HEAVY DUTY TUBE CUTTER • Use to cut tubing made of hard and soft copper, aluminium, brass, thin wall steel and stainless steel lines 3 to 35mm $42 • Length: 11.5 x 50mm • High strength chrome molybdenum • Application: Porsche, VW Touareg, Audi Q7 1/2”DR BRAKE CALIPER SPECIAL SOCKET - 10PT $19 SP63008 3pc Multi Size Line Clamp Set • Handy pack of 3 clamps containing small, medium and large clamps to cover hose sizes from 3mm to 57mm HI-VIS $39 SP70714 HI-VIS MODEL PIECE PRICE SP70718 4PC $55 SP70717 2PC $29 FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT SPTOOLS.COM • Intuitive and user-friendly LCD digital display • Detects D0T3/4/5.1brake fluid • Backlit display allows testing in poorly lit areas • Red light indicator for quickly diagnosing poor brake oil quality • In-built alarm to indicate if the brake oil must be replaced $79 SP63027 PROB E HIGH SENSITIVITY 26 POWERED BY A 9V BATTERY (INCLUDED) NEW • Smooth rounded edges on jaws will not damage internal hose linings • Light weight, non conductive, highly visible material • Jaw design eliminates damage to hoses • Available in sizes to suit flexible brake and fuel lines and large hoses HI-VIS LINE CLAMPS TRADIE CA$H $60 LINE CLAMPS
BRAKE FLUID RESERVOIR RE-FILLER - 600ml • Automatically refills brake fluid reservoir during brake bleeding • Retaining clip provides positive clamping to all master cylinder reservoir types • Height adjustment maintains correct fluid level; prevents running brake fluid reservoir dry BRAKE BLEED BOTTLE • Large collection bottle • Universal rubber fitting holds securely on brake bleed screw • Internal submersed tube prevents air drawback during brake bleeding • Hanging hook for hands free use Manual Brake Bleeder Kit SET INCLUDES BRAKE FLUID RESERVIOIR RE-FILLER & BRAKE BLEED BOTTLE $120 SP70858 Vacuum brake bleedeR 800ml VACUUM BRAKE BLEEDER KIT 4 LITRE • Large 4L capacity collection container • Quickly dispose of waste fluid via small remote cap • Storage point for bleeder fitting prevents fluid leakage from hose when not in use • High quality quick-release coupler • Overflow shut-off valve • Locking air trigger $279 SP71800 • Automatically refills brake fluid reservoir during brake bleeding • Retaining clip provides positive clamping to all master cylinder reservoir types • Height adjustment maintains correct fluid level; prevents running brake fluid reservoir dry • On-off tap PLUS BRAKE FLUID RESERVIOIR RE-FILLER • Uses compressed air to generate deep vacuum to bleed old fluid and air from hydraulic brake systems • Compact size allows easy operation within wheel arch area • Universal rubber fitting holds securely on brake bleed screw • Quick connect coupler for hose interchange as required • Convenient hanging hook and quick release trigger allows hands-free operation $269 SP70854 BRAKE FLUID RESERVOIR RE-FILLER - 600ML FLUID TRANSFER SINGLE & TWIN SP70972 $95 5pc Ball Joint Extractor Set KIT INCLUDES • Three forks & two handles • 24mm Ball-joint separator • 28.5mm Pitman-arm wedge • 18mm Tie-rod spreader • 8” manual knurled grip handle • 8” air-tool compatible handle with chuck collar $125 SP67024 $19 SEPARATORS 27 Brake Bleeder Kit Magnetic • Easily secures bottle to metal surfaces for one person, hands free operation • For use on brake calipers, wheel cylinders and master cylinders $8.95 SP63030 PROUD TOOL PARTNER sam_eyles 25L BRAKE & CLUTCH PRESSURE BLEEDING KIT $199 SP70809 • Flush the entire system with one fill without the risk of running the • Pressure range makes unit suitable for use with ABS systems • Fitted with Ø42mm cap and suitable for most European models • Additional adaptors available to expand vehicle capabilities APPRENTICE CASH $20 NORMALLY $29 $320 NORMALLY
• Precision ground blades • Heavy duty timber handles • 10, 15 & 23mm blades Stainless Steel Scraper Set $59 SP30805 $49 SP30800 SCRIBE SET • Both tools facilitate easy removal & installation of O-rings & seals, scribing, carving & part placement • Combination pick and hook pick • 90° pick and straight pick $19 SP30808 • Durable aluminium handle • Knurled Handle for additional grip WINDSCREEN REMOVABLE TOOL REPLACEMENT BLADES AVAILABLE • Hardened then honed blade allows fast $35 SP30829 • Blade widths: 20mm, 25mm & 40mm • 11” Multi-purpose scraper • 8-1/4” Multipurpose scraper • 8” Scratch awl • 9” Cotter pin puller • Radiator hose remover SCRAPER AND REMOVER SET - 5 PIECe $59 SP30865 4pc MAGNETIC PARTS TRAYS & HOOKS SET • Great parts storage • Magnetic based stainless steel trays and hooks hold themselves and contents in any position avoiding loss of parts • Heavy duty magnetic plates securely hold the trays and hooks to any steel surface $20 SP30913 • Large but low profile parts tray $19 SP30910 $36 SP30912 • Low profile design 150 mm DIA. 270 x 295 x 30 mm MAGNETIC PARTS TRAYS (Cr-Mo) durability greater END 28 PROUD TOOL PARTER OF ironknucklesfab APPRENTICE CASH $10 • Adjustable head up to 15 locking positions • Indexable to over 180° SINGLES ALSO AVAILABLE SP30872 406mm (16”) $59 SP30874 559mm (22”) $79 SP30876 762mm (30”) $139 SP30870 $99 MAGNETIC PARTS TRAYS
CONSTRUCTION SERIES On-site Power shortage is not a problem when you have an SP Construction Series Generator. RESIDUAL CURRENT DEVICE DIESEL POWERED $2999 SPGD6800E 6.8 KVA Pull START 2x 15A Outlets WHEEL KIT INCLUDED 10HP GENERATORS ELECTRIC START 3x 15A Outlets WHEEL KIT INCLUDED $4995 SPGC12000E to offer a range of generators that produce a very pure energy supply. 8.1 KVA ELECTRIC PULL 3x 15A Outlets 1825 SPG8100E 15HP • Large Capacity 25L Tank • Sine Wave Technology • Automatic • Voltage Regulator $999 SP360P $189 AR120 • Flow Rate: 23.4 Litres p/min • Power: 15Hp Torini Engine • 6.5 Litre fuel tank • Ceramic coated stainless steel pistons - Able to use sea water 4000PSI COMMERCIAL 1740PSI DOMESTIC PETROL ELECTRIC • Max Pressure: 3600psi • Flow Rate: 11.3 Litres p/min • Power: 6.5Hp Torini Engine • 3 Litre fuel tank • Max Pressure: 1740PSI • Flow Rate: 6.5 Litres p/min • Power: 1400 Watts • Hose Length: 5m EQUIPMENT INCLUDED: • Trigger • Variable Spray Nozzle Lance • Turbo Nozzle Lance • 5m High Pressure Hose with Quick Connect • Detergent Bottle • Transparent Water Filter APPLICATIONS 3600PSI HEAVY DUTY SP400P 10 LITRE TANK 4500 Watts ELECTRIC START 2x 15A OUTLETS $1995 SPGi4500E SPGi3300 999 PULL START 2X 15A OUTLETS 4L TANK 3300 WATTS SPGi7500E $4500 25 LITRE TANK ELECTRIC START PULL START 7500 WATTS 2X 15A OUTLETS 1X 32A OUTLETS 50HZ POWER BLUETOOTH START SINE WAVE TECHNOLOGY DIGITAL 29 PETROL PRESSURE WASHER 5.5HP 2700PSI • 8m HP Textile Braided Hose with M22 Fittings • 0°, 25° & Detergent Nozzles • On-board Storage • 2700 Max PSI • 8.7 Litres Per Minute (Max.) • 5.5hp Engine • Professional Trigger • Adjustable pressure • Rubber Wheels • Thermal Safety Valve • 3.7 Litre Fuel Tank $1999 SP400P $1930 NORMALLY $599 NORMALLY SUPER QUIET INVERTER GENERATORS 3 MODELS AVAILABLE SPGi4500E SPGi7500E
SPTOOLS.COM MEASURING $239 • LENGTH: 380mm • RANGE: 27-135Nm T835252 3/8"Dr $249 • LENGTH: 480mm • RANGE: 40-200Nm T835355 1/2"Dr $369 SP70750 $289 SP70800 • The patented inflatable bladder attaches to radiator or header tanks for system testing • Eliminates the need for adapters to pressure test the cooling system • Identifies cooling system pressure leaks • Includes 6 double end radiator cap testers PROUD SPONSOR OF THE AUSTRALIAN KART CHAMPIONSHIP FOR FULL PRODUCT DETAILS ON THE SP TOOLS RANGE, VISIT 30 DIAL Vernier Calipers - 150mm/6" • 150mm/6” Metric/SAE digital vernier • Measuring face hardened & lapped • Metric & SAE reading on dial • Graduation 0.02mm/0.0001” APPRENTICE APPRENTICE CASH $35 TRADIE CA$H $50
• The most versatile, comprehensive, multi-purpose body/interior commercial trim removal and scraper tool set available • Ideal for the removal of trim mounting clips and fasteners, windshield mouldings, dash removal, internal and external trims 28PC TRIM PANEL & SCRAPER SET $139 SP30877 • Damage free removal of push pin rivets with centre locking pins PULLERS THREAD REPAIR MODEL SIZE PRICE SP67062 30-50mm $55 SP67063 50-102mm $75 SP67064 75-105mm $95 AVAILABLE IN 3 SIZES $249 SP31100 SIMPLY PURCHASE A 'TRADIE CASH' MARKED PRODUCT AND RECEIVE AN ONLINE VOUCHER TO SPEND AT WWW.SPTOOLS.COM PICK THE BONUS TOOLS YOU WANT REDEEMING IS QUICK AND EASY. VISIT OUR TRADIE CASH PAGE AT SPTOOLS.COM FOR MORE INFORMATION Visit sptools.com for full terms & conditions. TRADIE CA$H SP TOOLS IS NOW ON TIKTOK! MAKE SURE YOU FOLLOW US TO STAY UP TO DATE WITH ALL THINGS SP TOOLS 31 TRADIE CA$H $20 WIPER ARM REMOVAL TOOL UNIVERSAL • Adjustable, compact and light, easy to use • Prevents damaging wiper arm $49 SP67042 APPRENTICE CASH $10
YOUR LOCAL STORE: $139 14pc METRIC • 6 - 19mm SP10014 • Chrome Vanadium Steel (Cr-V) for high strength & durability QUAD DRIVE ROE COMBINATION SPANNER SET PROFESSIONAL TYRE INFLATOR WITH DEFLATOR 1/4, 3/8 & 1/2"DR UNIVERSAL JOINT SET SCAN THE QR CODE TO CHECK OUT OUR DEMONSTRATION VIDEO DUAL HEAD DIGITAL DISPLAY $199 SP65510 • Pressure measuring range: 0-160PSI (+/- 2% @25C) • Dual chuck • Operating pressure: 90PSI • Air Flow: 1.2CFM at 100PSI • Flexible Joint - Designed to swing 90° in both directions, ideal for accessing hard to reach nuts and bolts • CAT II 600V • Continuity • Back Light • Data Hold • AC/DC Voltage • DC Current • Resistance • Diode Test • Transistor Test Digital Multimeter $29 SP62012 79 $3495 EACH FOAMED APPRENTICE CASH $350 SP50115X Black SP50115WX White AVAILABLE IN 2 COLOURS: $3349 EACH STANDARD APPRENTICE CASH $350 SP50115 Black SP50115W White AVAILABLE IN 2 COLOURS: 26PC 3/4"DR SOCKET SET +BONUS VALUED AT $299 890(W) x 510(D) x 615(H) OFF ROAD SERIES TOOL KIT METRIC/SAE 413PC BELT DRIVE Cast Iron STATIONARY AIR COMPRESSORS 3 PHASE - 15AMP • High efficiency induction motor • Independent 3 phase switch box operates by a single phase CAST 508L/min V-Twin 880L/min Triple 1360L/min Triple COMMERCIAL GRADE NEW T820400 NEW • Pin Punches: 2, 3, 4, 5, 6, 8 & 10mm • Cold Chisels: 12, 20 & 24mm 10 PIECE PUNCH & CHISEL SET $89 SP30841C NEW LIMITED STOCK $275 NORMALLY $195 NORMALLY All prices include GST. Not all products in this brochure are available from all outlets. Prices may vary in some country areas due to freight costs. All products in this brochure were available at the time of printing. Austech Industries will do everything possible within reason, to maintain stocks of products advertised but cannot be responsible for unforeseen shortfalls beyond their control. E & OE Copyright. WWW.SPTOOLS.COM Please note: Images are for illustration purposes only, contents and colours may vary. While Austech Industries makes every reasonable effort to ensure the accuracy and validity of the information provided. Pricing and specifications are continually changing, Austech Industries reserves the right to change at any time without notice, the information contained in our Trade Catalogues, Promotional Brochures, Catalogues and all such print media, and makes no warranties or representations as to its accuracy.