1 minute read
AFTER A SESSION!
Removing The Battery
IMPORTANT:
Advertisement
Never attempt to remove the battery if the board is on or near water.
The area around the battery compartment must be completely dry before removing the battery. There should be no water present near the connectors when disconnecting.
1. Push the cover clip towards the front of the board. At the same time, lift the hinged cover to open the compartment. Check that everything is dry inside the battery compartment.
2. Unlock the connector by turning it a quarter turn to the left. You can now safely disconnect the male and female connectors.
3. Once it is disconnected you can safely remove the battery from its compartment.
