General International Spring/Summer Metal Flyer 2013

Page 1

201 New! 2 201 3 $3,799.99 $4,169.99

ER

Fall

25-355 M1

60-350 M1

ng ma chin ery

reg. $4,500.00

reg. $5,900.

500 lb holding capacity.

95-200

99 $9. reg. $15. 95

Horizontal handle toggle clamp 880 lb holding capacity.

95-220

99 $12. reg. $28. 00

WINT

14'' variable speed cold cut saw Variable blade speed: 24 to 120 rpm - ideal for cutting ferrous materials. Miter stops at 90°, 45° left and 45° right. Coolant pump system with high volume tank. Magnetic switch with overload protection. 3 HP motor.

orki talw

00

T-handle toggle clamp

10” x 22” variable speed metal lathe with stand

Blade not included.

Me

22” distance between centers. Steady and follow rest included. Pulley case and chuck guard both equipped with auto shut-off safety switch. Variable speed (100 to 2000 rpm). Digital speed display. 3 jaw self-centering and 4 jaw chucks included. 1 ½ HP motor.

Geared head milling / drilling machine

200 lb holding capacity.

750 lb holding capacity.

95-265

95-270

$6. reg. $11.

99 $18. reg. $31.

99 45

20

Horizontal handle toggle clamp 750 lb holding capacity.

95-275

99 $13. reg. $22. 95

Push / pull toggle clamp 850 lb holding capacity.

95-295 20

15-920 M1

$999.99

60-355

$244.99

reg. $1,175.00

reg. $360.00

Electronic variable speed drill press

75-915T M1 Front mounted digital spindle speed display. Electronic variable speed control adjusts spindle speed from 150 to 3000 rpm. Forward/reverse tapping system. Large and solid base with a built-in tank for cooling, give a more stable operation. 2 HP motor.

$3,799.99

$3,149.99

12” heavy-duty grinder with stand Permanently lubricated double sealed bearings. Cast-iron wheel guards and dust vents. Heavy-duty cast tool rests and 2” wide wheels. 1 ½ HP motor.

LED work light with magnetic base 99-250

$54.99 reg. $89.00

reg. $4,100.00

Great Western Saw

Vertical handle toggle clamp

99 $19. reg. $31.

14” x 120T hi-speed steel blade

75-870 M1 Head tilts up to 30º left and 90º right for angle drilling, milling, slotting and more. Magnetic safety switch with forward/ reverse controls. 6 spindle speeds: 60, 130, 230, 450, 800 & 1500 rpm. See-through chuck guard with safety interlock and safety limit switches. 1 ½ HP motor.

reg. $5,000.00

Vertical handle toggle clamp

www.general.ca

6” drill press vise

4” cross vise

99 $39. reg. $55.

99 $79. reg. $95.

95-400

95-160

Distributed by:

A cut Above the Rest

306-652-6858

(Saskatoon) 722C 45th St W

306-543-6970

(Regina)

1056 Winnipeg St

00

Toll Free 1-866-652-6858 www.greatwesternsaw.com

We reserve the right to correct any typographical and pictorial errors without notice. Printed in Canada

00

5” all steel swivel bench vise 95-950

Prices are in effect from November 1st, 2012 to February 28th, 2013

$99.99

reg. $115.00


$449.99

Horizontal metal cutting bandsaws

reg. $595.00

Horizontal or vertical cutting. Chip brush and blade guard included. Adjustable hydraulic down feed control. Coolant system with built-in tank and pump. 4-speed design: 86, 132, 178 and 260 fpm. 1 HP motor.

4 ½” x 6” horizontal metal cutting bandsaw 90-665 M1 Auxiliary table for vertical cutting. Horizontal or vertical cutting. Automatic shut off at the end of cutting cycle. Fully adjustable blade guide bearings. Sturdy vise with 0 - 45° left swivel. ½ HP motor.

7” x 10” 90-730 M1

$1,349.99 reg. $1,700.00

Auxiliary table included

$3,269.99 reg. $3,980.00

9” x 16” horizontal metal cutting bandsaw

8” x 12”

90-790 M1 One-piece heavy-duty thick steel upper frame. Welded onepiece base made of high-quality steel with built-in coolant tank and recovery tray. Adjustable hydraulic down feed control. 4 blade speeds: 82, 131, 167 and 233 fpm. 1 ½ HP motor.

90-780 M1

$1,589.99 reg. $2,000.00

Heavy-duty 15” drill press Extra long 6” quill stroke and heavy-duty positive depth stop. 34-156 M1

$1,299.99 reg. $1,900.00

75-200RC M1

$549.

99

reg. $730.00

17” drill press ⅝” chuck with key, laser line marker & seethrough chuck guard included. Rotating, 45° tilting, crank-operated worktable. Forced opening line interrupter safety switch included. 12 spindle speeds: 340 to 2800 rpm. ¾ HP motor.

New!

New!

Precision-machined highgrade cast-iron base, table and head to ensure maximum tolerances and vibration free performance. Precision machined steel column for smooth table and head adjustments. 6 spindle speeds: 400, 625, 1125, 1950, 3400 and 5000 rpm. See-through chuck guard included. 1 HP motor.

60-250 M1

$2,099.99 reg. $2,600.00

12'' slow speed cold cut saw 52 rpm blade speed - ideal for cutting ferrous materials. Miter stops at 90°, 45° left and 45° right. Coolant pump system with high volume tank. Magnetic switch with overload protection. 2 ½ HP motor. Blade not included.

12” x 180T hi-speed steel blade 60-255

75-500 M1

$919.

99

reg. $1,270.00

22” drill press

¾” chuck with key, laser line marker & see-through chuck guard included. Cast-iron pulleys reduce vibration. Large front mounted paddle style stop switch with lock-out safety feature to prevent unwanted or unintentional start-up. Industrial 1 HP motor.

99 $224. reg. $330. 95

Heavy-duty roller stands with 2000 lbs load capacity

Heavy-duty cast-iron and steel construction. Chrome-plated ball bearing roller. Adjustable height (23 ½” to 38 ½”).

Deluxe measuring kit with 6” or 8” digital caliper 99-600K

(with 6” caliper)

$49.99 reg. $87.75

90-805

$132.

99

reg. $180.00

90-810

$139.99 reg. $185.00

Includes: 6” or 8” digital electronic caliper, 6” hook rule and a polished tempered steel feeler gauge set from 0.002” to 0.025”.

99-800K

(with 8” caliper)

$74.99

reg. $113.30


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.