INDEX 3.2
4 5 6 7 8 9 10 12
5.2 4.2
13 14 15 16 17 18 19 20 21
ACCESSORIES
BOLTS
8.0 6.2
22 22
23 24 24 24 SPECIAL ARROWS 25 SELECTION CHART 26 NOCKS PIN ADAPTERS 27 27 NOCK COLLARS 28 BUSHING AND INSERTS 29 PLASTIC VANES NATURAL FEATHERS 29 30 GLUE IN POINTS 32 SCREW-IN POINTS SPECIAL POINTS 33 33 GLUE FLETCHER JIG 33 34 ACCESSORIES 35 PROMOTIONAL PRODUCTS
Cross-X was born more than 10 years ago as an arrow components manufacturer to evolve lately as an arrow producer when it launched the renowned and highly successful Ambition model. From a rather limited range of products, designed for beginners or archer approaching the first competitions, the brand has recently evolved into what can today be defined, without fear of denial, one of the richest and most complete arrow programs available on the market. The Cross-X line covers all possible archery disciplines: from target with high-modulus 3.2 mm internal shafts such as the Plurima, to the XXIII shafts for indoor shooting, to the Hurricane that are suitable for target shooting as well as Field and 3D archery and so on, to compose an unparalleled range. In addition to covering every possible archery discipline the Cross-X line offers different price levels within the same model in order to satisfy archers with different budgets or offer the same customer shafts and arrows to be used in competitions and the same model in a cheaper version to be used in training. Rely on Cross-X line just like other numerous archers worldwide!
3
3.2 The Cross-X Plurima shaft is made of very high modulus carbon (40 tons), it is precise (straightness +/- 0.001 ") and available with spine from 350 to 800 (10 different sizes) with 3.2 mm inside diameter. The Cross-X Plurima is a sturdy and precise shaft designed to obtain maximum performance in target shooting, suitable for both compound and recurve shooters. Its internal components are also compatible with those of the X10®. Shaft supplied complete with pin adapters compatible with all nocks available on the market. CODE 53P166 SHAFT
SPINE
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER
350
9.07
32”
Ø 3.2 mm
Ø 5.38 mm
400
8.34
32”
Ø 3.2 mm
Ø 5.27 mm
450
7.76
32”
Ø 3.2 mm
Ø 5.16 mm
500
7.23
32”
Ø 3.2 mm
Ø 5.03 mm
550
6.75
32”
Ø 3.2 mm
Ø 4.98 mm
600
6.46
32”
Ø 3.2 mm
Ø 4.85 mm
650
6.12
32”
Ø 3.2 mm
Ø 4.81 mm
700
5.79
32”
Ø 3.2 mm
Ø 4.72 mm
750
5.59
32”
Ø 3.2 mm
Ø 4.70 mm
800
5.35
32”
Ø 3.2 mm
Ø 4.64 mm
OTHER COMPONENTS BEITER NOCK PIN CODE 53F693
EASTON TUNGSTEN POINT
Extremely precise pin nock, available both asymmetric and symmetrical, large or small. Available in colors: fluo green, fluo orange, fluo red, solid black, solid white, solid yellow.
CODE 535668
Weight: 5 grains
OD 4.972 mm 120-115-110 grains
High precision break off point. Tungsten allows to obtain a very high weight in a small dimension.
DECUT TUNGSTEN POINT CODE 53R777 Tungsten point with +/- 0.4 grains weight tolerance. OD 4.815 mm 90-100-110, 100-110-120, 120-130-140 grains
3.2 COMPONENTS 3.2 COMP HS POINT
3.2 COMP POINT
CODE 53S424 #1 #2 #3
OD 5.28 mm for spine 350 - 450 OD 5.04 mm for spine 500 - 650 OD 4.79 mm for spine 700 - 800
CODE 53R408 100 - 120 grains 100 - 120 grains 100 - 120 grains
#1 #2
OD 5.45 mm for spine 350 - 450 OD 5.03 mm for spine 500 - 650
120 grains 120 grains
3.2
PLURIMA CUBE For all those looking for a great product at a more competitive price, Cross-X offers the Cube version of the Plurima shaft. The Plurima Cube has the same weight and spine features but with a straightness of +/- 0.003 �. The shaft, sold in packs of 12 pieces, is complete with pins that fit all the pin adapters nocks available on the market. Each dozen is selected and grouped by weight and spine.
CODE 53S348 SHAFT
EXENTIA On the basis of the shaft Plurima Cross-X offers the Exentia: a product that suits whoever, despite a limited budget, still wants to be able to use a very high level shaft. The weight characteristics are the same but in this case the straightness is +/- 0.005 ". Offered only complete with pin adapters that fit any pin nocks available on the market.
53S359 SHAFT
FLETCHING TAPE CODE 53T866 Ingenious and practical system to apply the double-sided fletching tape on the shafts. It is applied like a wrap. In a single movement it allows you to apply, perfectly aligned, all three double-sided tapes and to do it at the correct distance from the nock thanks to the pre-cut lines. Available for all Cross-X target shafts, in the different spine.
3.2 COMP PIN
CODE 53Q052 #1 #2 #3
OD 5.11 mm for spine 350 - 450 OD 4.80 mm for spine 500 - 650 OD 4.63 mm for spine 700 - 800
8.4 grains 8.3 grains 8.0 grains
PIN NOCK
PIN NOCK LONG
CODE 537428
CODE 536012
Available with large or small groove. Weight: 2.7 grains
Available only with large groove. Weight: 2.7 grains
5
An incredibly versatile shaft that, thanks to the use of high modulus carbon, is extremely lightweight. This makes it suitable for multiple uses, from target shooting to field and even 3D archery. The Hurricane shaft is available in three different levels of straightness. Shaft sold complete with pin adapters that fits any nock available on the market.
HURRICANE CUBE Shaft with straightness +/- 0.003".
CODE 53S517 SHAFT + PIN
4.2
HURRICANE PENTA Shaft with straightness +/- 0.005".
CODE 53S525 SHAFT + PIN
HURRICANE OCTAGON Shaft with straightness +/- 0.008"
CODE 53S532 SHAFT + INSERT NOCK 4.2 CODE 53S539 ARROW complete with 2” AIR VANES and 4.2 nock. SPINE
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER
350*
7.40
32”
Ø 4.2 mm
Ø 5.79 mm
400*
6.70
32”
Ø 4.2 mm
Ø 5.61 mm
500*
5.84
32”
Ø 4.2 mm
Ø 5.44 mm
600
5.84
32”
Ø 4.2 mm
Ø 5.41 mm
700
5.79
32”
Ø 4.2 mm
Ø 5.48 mm
800
5.30
32”
Ø 4.2 mm
Ø 5.38 mm
900
5.00
32”
Ø 4.2 mm
Ø 5.30 mm
1000
5.21
32”
Ø 4.2 mm
Ø 5.38 mm
1100
5.50
32”
Ø 4.2 mm
Ø 5.40 mm
* Available only in the Cube version. For this spine use the point 4.2 AERO #1.
4.2 COMPONENTS 4.2 AERO POINT
4.2 COMP POINT
4.2 EVO POINT
CODE 53S588
CODE 53P873
CODE 53E740
#1 OD 5.48 mm #2 OD 5.35 mm #3 OD 5.35 mm
120 - 140 grains 100 - 120 grains 70 - 90 grains
#1 OD 6.46 mm #2 OD 5.80 mm #3 OD 5.50 mm
100 - 130 grains 90 - 120 grains 70 - 100 grains
#1 OD 5.86 mm #2 OD 5.75 mm #3 OD 5.45 mm
100 grains 80 grains 70 grains
Shaft made of high quality carbon available in spines from 350 to 1300 with an internal diameter of 4.2 mm. Precise and strong, it is suitable for target, field and 3D archery. Specific glue in components. The Maior shaft is available in three different levels of straightness.
MAIOR CUBE Shaft with straightness +/- 0.003".
CODE 53P158 SHAFT + PIN
MAIOR PENTA 4.2
Shaft with straightness +/- 0.005".
CODE 53S546 SHAFT + PIN
MAIOR OCTAGON Shaft with straightness +/- 0.008".
CODE 53S554 SHAFT + PIN CODE 53S561 ARROW complete with pin and pin nock, AIR 2” VANES. SPINE
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER
350
9.52
32”
Ø 4.2 mm
Ø 6.09mm
400
8.58
32”
Ø 4.2 mm
Ø 5.92 mm
500
7.67
32”
Ø 4.2 mm
Ø 5.75 mm
600
6.97
32”
Ø 4.2 mm
Ø 5.69 mm
700
6.27
32”
Ø 4.2 mm
Ø 5.56 mm
800
5.79
32”
Ø 4.2 mm
Ø 5.47 mm
900
5.06
32”
Ø 4.2 mm
Ø 5.32 mm
1000
4.34
32”
Ø 4.2 mm
Ø 5.24 mm
1100*
4.15
32”
Ø 4.2 mm
Ø 5.11 mm
1300*
3.40
32”
Ø 4.2 mm
Ø 5.04 mm
* Available as shaft or arrow in the Octagon version only.
4.2 COMP PIN CODE 53Q049 #1 OD 6.06 mm 12.0 grains #2 OD 5.75 mm 11.4 grains #3 OD 5.43 mm 11.4 grains
PIN NOCK CODE 537428
PIN NOCK LONG CODE 536012
4.2 NOCK CODE 537409
Available with large or small groove. Weight: 2.7 grains
Available only with large groove. Weight: 2.7 grains
Available with large or small groove. Weight: 5.7 grains
7
An extremely versatile shaft suitable for multiple uses from target to 3D archery. Very lightweight and strong. The Pegasus shaft is available in three different straightness levels.
PEGASUS CUBE Shaft with straightness +/- 0.003".
CODE 53T548 SHAFT + PIN CODE 53U281 SHAFT with cresting + PIN
PEGASUS PENTA 4.2
Shaft with straightness +/- 0.005".
CODE 53T555 SHAFT + PIN CODE 53T569 ARROW complete with pins and AIR VANES.
PEGASUS OCTAGON Shaft with straightness +/- 0.008"
CODE 53T562 SHAFT complete with nock 4.2. CODE 53T576 ARROW complete with nock 4.2, AIR PLASTIC VANES and point not glued. CODE 53T583 ARROW complete with nock 4.2, 2.5 ”SHIELD FEATHERS and point not glued. SPINE
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER
500
8.13
32”
Ø 4.2 mm
Ø 5.93 mm
600
7.10
32”
Ø 4.2 mm
Ø 5.73 mm
700
6.45
32”
Ø 4.2 mm
Ø 5.64 mm
800
6.00
32”
Ø 4.2 mm
Ø 5.53 mm
900
5.33
32”
Ø 4.2 mm
Ø 5.41 mm
1000
5.10
32”
Ø 4.2 mm
Ø 5.38 mm
1100
4.80
32”
Ø 4.2 mm
Ø 5.32 mm
1300
4.30
32”
Ø 4.2 mm
Ø 5.17 mm
1500*
4.10
30”
Ø 4.2 mm
Ø 5.13 mm
1800*
3.57
28”
Ø 4.2 mm
Ø 5.03 mm
2000*
3.23
28”
Ø 4.2 mm
Ø 4.95 mm
2500*
3.04
28”
Ø 4.2 mm
Ø 4.91 mm
* Available as shaft or arrow in the Octagon version only.
4.2 COMPONENTS 4.2 AERO POINT
4.2 COMP POINT
4.2 EVO POINT
CODE 53S588
CODE 53P873
CODE 53E740
#1 OD 5.48 mm #2 OD 5.35 mm #3 OD 5.35 mm
120 - 140 grains 100 - 120 grains 70 - 90 grains
#1 OD 6.46 mm #2 OD 5.80 mm #3 OD 5.50 mm
100-130 grains 90-120 grains 70-100 grains
#1 OD 5.86 mm #2 OD 5.75 mm #3 OD 5.45 mm
100 grains 80 grains 70 grains
Carbon shaft with an inside diameter of 4.2 mm featuring a bamboo finish. Beautiful and elegant, it comes standard with a protective collar installed. The straightness for this shaft is +/- 0.003 ". Available as shaft and arrow in spines from 500 to 1000. Strong shaft designed for traditional archery. CODE 53N758 SHAFT
SPINE
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER
500
9.25
32”
Ø 4.2 mm
Ø 5.90 mm
600
7.76
32”
Ø 4.2 mm
Ø 5.70 mm
700
6.77
32”
Ø 4.2 mm
Ø 5.55 mm
800
6.32
32”
Ø 4.2 mm
Ø 5.50 mm
900
5.68
32”
Ø 4.2 mm
Ø 5.36 mm
1000
5.10
32”
Ø 4.2 mm
Ø 5.25 mm
4.2
CODE 53N766 ARROW with 3" SHIELD FEATHERS
The aluminum collars supplied with the Helios shafts are also available as optional accessories. PROTECTIVE COLLAR CODE 53Q901 #1 OD #2 OD #3 OD
6.0 mm 5.7 mm 5.5 mm
13.5 grains 12.0 grains 10.2 grains
The shaft in 500 spine needs a specific point. This point can be cut and it has two removable stages of 10 grains each. POINT 4.2 HELIOS
CODE 53P948 OD 6.3 mm 80-90-100 grains
4.2 COMP PIN CODE 53Q049 #1 OD 6.06 mm 12.0 grains #2 OD 5.75 mm 11.4 grains #3 OD 5.43 mm 11.4 grains
PIN NOCK CODE 537428
PIN NOCK LONG CODE 536012
4.2 NOCK CODE 537409
Available with large or small groove. Weight: 2.7 grains
Available only with large groove. Weight: 2.7 grains
Available with large or small groove. Weight: 5.7 grains
9
A shaft that over the years has achieved remarkable success amongst archers in different fields, from target to 3D archery. The shaft is complete of nock, pin and non-installed point to allow cutting the shaft at the desired length. The wide availability of spines and insert components, typical of high ends arrows, makes it the ideal shaft for the first competitions and for those looking for an excellent product at an unbeatable price. Straightness of +/-0.003".
CODE 53E726 SHAFT complete with pins, pin nocks and points not installed.
4.2
CODE 53Q223 ARROW complete with pin, pin nock, ARIZONA EP16 VANES and point not installed.
SPINE
LENGTH
GPI
INSIDE DIAMETER
OUTSIDE DIAMETER
WEIGHT POINT
500
33”
8.1
Ø 4.2 mm
Ø 5.86 mm
100
600
33”
7.0
Ø 4.2 mm
Ø 5.65 mm
80
700
33”
6.3
Ø 4.2 mm
Ø 5.55 mm
80
800
33”
5.9
Ø 4.2 mm
Ø 5.42 mm
70
900
33”
5.5
Ø 4.2 mm
Ø 5.35 mm
70
1000
33”
5.0
Ø 4.2 mm
Ø 5.33 mm
70
1100
33”
4.9
Ø 4.2 mm
Ø 5.26 mm
70
1300
33”
4.7
Ø 4.2 mm
Ø 5.17 mm
70
1500
33”
4.2
Ø 4.2 mm
Ø 5.10 mm
70
1800
33”
3.9
Ø 4.2 mm
Ø 5.06 mm
70
XS WINGS VANES CODE 53E450
The XS Wings vanes, already very appreciated by numerous international level archers, are available in a wide range of colors among which fluorescent and metallic ones. The available lengths are 40, 50, 60, 70 and 100mm.
4.2 COMPONENTS 4.2 AERO POINT
4.2 COMP POINT
4.2 EVO POINT
CODE 53S588
CODE 53P873
CODE 53E740
#1 OD 5.48 mm #2 OD 5.35 mm #3 OD 5.35 mm
120 - 140 grains 100 - 120 grains 70 - 90 grains
#1 OD 6.46 mm #2 OD 5.80 mm #3 OD 5.50 mm
100 - 130 grains 90 - 120 grains 70 - 100 grains
#1 OD 5.86 mm #2 OD 5.75 mm #3 OD 5.45 mm
100 grains 80 grains 70 grains
AMBITION GOLD EDITION
4.2
The Ambition shaft, that has proven its own good quality over the years, is now available in the new Gold Edition version. This shaft presents a golden color crest on the back of the shaft, and features an incredible straightness of +/- 0.001 ". This makes the Ambition Gold Edition a great choice for target archery. CODE 53S572 SHAFT complete with pins and pin nock
NB: the Gold Edition shaft does not include the point, which needs to be purchased separately.
AMBITION SILVER EDITION In this particular version, the shaft has a silver color crest, that makes it even more appealing. Straightness: +/-0.003". CODE 53R100 SHAFT complete with pins, pin nock and point not inserted. WRAPPING TAPE CODE 53P098 A good product to customise your arrows and at the same time fix vanes like Spin Wing vanesÂŽ or similar. For more details see page 34.
4.2 COMP PIN CODE 53Q049 #1 OD 6.06 mm #2 OD 5.75 mm #3 OD 5.43 mm
PIN NOCK CODE 537428
PIN 4.2 EVO CODE 53S926 12.0 grains 11.4 grains 11.4 grains
#1 OD 5.80 2 mm #2 OD 5.40 2 mm
Available with large or small groove. Weight: 2.7 grains 8.4 grains 8.4 grains
4.2 NOCK CODE 537409 Available with large or small groove. Weight: 5.7 grains
11
4.2
A composite fiber-carbon shaft with an inside diameter of 4.2 mm and spine ranging from 600 to 1800. Its strength combined with the excellent price makes it the best choice for archery schools, beginners and 3D trails. The Exordium is complete with pin, pin nock and point. Straightness: +/-0.006".
CODE 53N775 ARROW The Exordium is offered as a complete arrow with plastic vanes of 1.6" length and parabolic profile, complete of nock and point already glued in the shaft. The length varies according to the spine as specified in the table below. CODE 53P886 ARROW fletched with NATURAL FEATHERS The Exordium, in spines from 600 to 1300, is also offered as a fletched arrow with 3"shield feathers for sizes from 600 to 900 and 2" feathers for sizes from 1000 to 1300. Also in this case the length of the shaft varies depending on the spine and the point is already glued into the shaft. SPINE
GPI
LENGTH ARROW
LENGTH SHAFT
INSIDE DIAMETER
OUTSIDE DIAMETER
WEIGHT POINT
600
8.48
32”
33”
Ø 4.2 mm
Ø 5.87 mm
70
700
7.48
31”
33”
Ø 4.2 mm
Ø 5.70 mm
70
800
7.03
30”
33”
Ø 4.2 mm
Ø 5.61 mm
70
900
6.59
30”
33”
Ø 4.2 mm
Ø 5.52 mm
70
1000
6.32
29”
33”
Ø 4.2 mm
Ø 5.48 mm
70
1100
5.96
28”
33”
Ø 4.2 mm
Ø 5.40 mm
50
1200
5.72
28”
33”
Ø 4.2 mm
Ø 5.36 mm
50
1300
5.32
28”
33”
Ø 4.2 mm
Ø 5.28 mm
50
1500
5.23
27”
33”
Ø 4.2 mm
Ø 5.25 mm
50
1800
4.59
27”
33”
Ø 4.2 mm
Ø 5.11 mm
50
4.2 COMPONENTS 4.2 EVO POINT
4.2 BASIC POINT
CODE 53E740 #1 OD 5.86 mm #2 OD 5.75 mm #3 OD 5.45 mm
CODE 53P807 100 grains 80 grains 70 grains
#1 #2 #3 #4
OD 5.90 mm 70 grains OD 5.65 mm 70 grains OD 5.46 mm 50,70 grains OD 5.20 mm 50 grains
PIN 4.2 BASIC CODE 53S921 #1 #2 #3 #4
OD 5.80 mm OD 5.50 mm OD 5.30 mm OD 5.10 mm
10.0 grains 10.0 grains 10.0 grains 10.0 grains
The new Cross-X Iridium arrow has the same structure as the Exordium arrow, but thanks to the bright colors of the crest it is immediately recognizable. The Iridium arrow is complete with nock, vanes and points already installed. Available with yellow, orange, green, or white cresting.
CODE 53Q946 ARROW with 1.6” PARABOLIC VANES CODE 53T974 ARROW with 2” SHIELD FEATHERS
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER
700
6.07
31”
Ø 4.2 mm
Ø 5.70 mm
900
5.50
30”
Ø 4.2 mm
Ø 5.52 mm
1100
4.44
28”
Ø 4.2 mm
Ø 5.48 mm
PIN NOCK CODE 537428 Available with large or small groove. Weight: 2.7 grains
4.2
SPINE
4.2 NOCK CODE 537409 Available with large or small groove. Weight: 5.7 grains
13
The Element arrow is at the base of the Cross-X 4.2 mm shafts program. It is a strong and affordable arrow designed for those approaching archery. Available in a limited number of spines that fit beginners. Supplied complete with 4.2mm insert nock. Straightness +/-0.006”. CODE 53S853 ARROW with 1.6 "PARABOLIC VANES CODE 53T975 ARROW with 2” SHIELD FEATHERS
4.2
SPINE
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER
700
6.08
31”
Ø 4.2 mm
Ø 5.5 mm
900
5.50
30”
Ø 4.2 mm
Ø 5.35 mm
1100
4.44
28”
Ø 4.2 mm
Ø 5.2 mm
1300
4.24
28”
Ø 4.2 mm
Ø 5.12 mm
1500
3.71
28”
Ø 4.2 mm
Ø 5.0 mm
NB: The points, included with the arrows, are in nickel-plated iron, with a weight of 70 grains and external diameter of 5,5mm for the spine from 700 to 900. The arrows in the spine from 1100 to 1500 instead, have a point of 50 grains and external diameter of 5.2mm.
4.2 COMPONENTS 4.2 BASIC POINT
4.2 NOCK CODE 537409 Available with large or small groove. Weight: 5.7 grains
CODE 53P807 #1 #2 #3 #4
OD 5.90 mm OD 5.65 mm OD 5.46 mm OD 5.20 mm
70 grains 70 grains 50,70 grains 50 grains
Lightweight and fast carbon shaft available as a shaft or arrow with spine from 340 to 800 made in the versatile 5.2 mm inside diameter. Meant for archers looking for an economical arrow for 3D archery that does not want to sacrifice performance and quality. Specific insert components. Supplied complete with pin adapters. The Avatar shaft is available in two different levels of straightness.
AVATAR CUBE Shaft with straightness +/- 0.003".
5.2
CODE 53T531 SHAFT CODE 53S721 SHAFT with cresting CODE 53T538 ARROW with cresting complete with pins, pin nocks and 3” SHIELD FEATHERS
AVATAR PENTA Shaft with straightness +/- 0.005".
CODE 53S654 SHAFT CODE 53S679 ARROW complete with pin, pin nock and AIR 2” VANES CODE 53S689 ARROW complete with pins, pin nocks and 3”SHIELD FEATHERS
SPINE
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER
340
8.15
32”
Ø 5.2 mm
Ø 6.65mm
400
6.87
32”
Ø 5.2 mm
Ø 6.45 mm
500
6.08
32”
Ø 5.2 mm
Ø 6.29 mm
600
5.74
32”
Ø 5.2 mm
Ø 6.25 mm
700
5.06
32”
Ø 5.2 mm
Ø 6.15 mm
800
4.53
32”
Ø 5.2 mm
Ø 6.05 mm
5.2 COMPONENTS 5.2 BREAK OFF POINT
POINT 5.2
BULLET SCREW-IN POINT
5.2 THREADED INSERT CODE 53S969 OD 6,07 mm
CODE 53I670 OD 6.62 mm
5.2 PIN CODE 53U197 OD 5.10 mm
60-70-80-90 grains
CODE 53H766
CODE 53G440
OD 6.35 mm
Point for screwed-in insert, available in many weights and two sizes. For the Avatar shafts we recommend the use of the 9/32" diameter.
70 grains
OD 9/32” 10.3 grains
60,80,100 grains
18.9 grains
NOCK 5.2 CODE 53B921 8.7 grains
BUSHING 5.2 FOR NOCK 4.2 CODE 53C461 OD 6,03 mm
3.0 grains
15
Extremely lightweight and sturdy carbon shaft with 6.2 mm inside diameter. Available in 400 to 800 spine. Shaft ideal for target and 3D archery, for any bow style, from compound to traditional. The best choice for the archer who needs speed and a flat trajectory. Specific internal components. Sold complete with nocks (already installed) and inserts (not installed). The Fulmen shaft is available in two different straightness levels.
FULMEN Shaft with straightness +/- 0.002 ". CODE 53S583 SHAFT
FULMEN OCTAGON Shaft with straightness +/- 0.008"
6.2
CODE 53U106 SHAFT CODE 53U123 ARROW with 2.25" X VANES CODE 53U112 ARROW with 3"SHIELD FEATHERS
SPINE
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER
400
6.47
33”
Ø 6.2 mm
Ø 7.19 mm
500
5.68
33”
Ø 6.2 mm
Ø 7.04 mm
600
5.11
33”
Ø 6.2 mm
Ø 7.01 mm
700
4.77
33”
Ø 6.2 mm
Ø 6.97 mm
800
4.49
33”
Ø 6.2 mm
Ø 6.93 mm
CROSS-X SCREW-IN PIN POINT CODE 53T060 The pin type profile is very popular in 3D archery because it allows the arrow to stick in the target even on the edges where normally the ogive points tend to rocket. At the collar there is a groove where to place the o-ring supplied in the package to avoid vibrations to loosen the point. Available in sizes 19/64 "and 9/32". 9/32” 19/64 "
70 grains 60,70,80,100 grains
6.2 COMPONENTS BREAK OFF INSERT POINT
VIKING POINT
BULLET SCREW-IN POINT
CODE 531988
CODE 537704
CODE 53G440
Cutting point of a 100 grains. It provides two removable sections of 10 grains each.
Point with an aerodynamic profile Viking®, and single weight. Available in different weights from 60 to a 100 grains.
OD 7.37 mm
OD 7.20 mm
Screw-in point for threaded insert, available in different weights and two sizes. For 6.2 shafts we recommend using the 19/64” diameter.
80-90-100 grains
60,70,80,90,100 grains
OD 19/64” 60,80,90,100 grains
6.2 mm inside diameter carbon-fiber composite arrow. Already cut to 28" length, it has a straightness of +/-0.006 ". Complete with nock, shield vanes, point insert and screw-in point already installed. Recommended screwed-in point: 5/16".
CODE 53R086 ARROW with PLASTIC VANES CODE 53R871 ARROW with NATURAL FEATHERS SPINE
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER
600
5.8
28”
Ø 6.2 mm
Ø 7.1 mm
ARROW PULLERS
Booster offers excellent arrow pullers that work in any weather condition.
CODE 53T398 POWER DISC PULLER 2
6.2
Flat shaped version that makes it particularly easy to find a pocket where you can store it without problems. The two grooves of different width allows you to pull arrows of different diameters with maximum effectiveness.
CODE 53T399 ARROW PULLER WITH ROPE Cylindrical model with fingerprints for a more effective grip. The central flared groove adapts to shafts of any diameter. Equipped with colored cord to hang it on the quiver.
6.2 INSERT CODE 53P872
BUSHING 6.2 FOR 4.2 CODE 53C462
6.2 NOCK CODE 537422
OD 7.44 mm
OD 7.22 mm
Weight: 10.2 grains
14.7 grains
8.7 grains
BUSHING RED CODE 53S593
NOCK 6.2 SHORT CODE 53P859
Weight: 7.8 grains
Weight: 10.5 grains
6.2 PIN CODE 53S605
4.2 NOCK CODE 537409
6.2 3D NOCK CODE 53C412
OD 7.41 mm
Weight: 5.7 grains
Weight: 9.9 grains
PIN NOCK CODE 537428 2.7 grains
9.9 grains
17
Camo carbon shaft, strong and fast (straightness +/-0.003 ") available with 400 and 500 spine with an inside diameter of 6.2 mm. It is a shaft thought for hunting, with an excellent quality price ratio. Available as a shaft or arrow. It comes complete with nocks (installed) and inserts (installed only in the 31" version). CODE 53P139 SHAFT CODE 53P136 Full-length ARROW with non-installed inserts CODE 53P142 ARROW cut to 31" with inserts installed
SPINE
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER
400
7.42
32”
Ø 6.2 mm
Ø 7.39 mm
500
6.45
32”
Ø 6.2 mm
Ø 7.26 mm
A INT3B BROADHEAD
B INT3BC BROADHEAD
C FIX3B BROADHEAD
CODE 53E642
CODE 53I034
CODE 53G981
C MEC2B BROADHEAD
CX MEC2B BROADHEAD
DELTA BROADHEAD
CODE 53I033
CODE 53I035
CODE 53P635
Three blades broadhead, 100 grains.
Monolithic broadhead with 3 blades, 100 grains.
6.2
Inexpensive broadhead with 3 blades, 100 grains.
Mechanical broadhead with 2 blades, 100 grains.
Mechanical broadhead with 2 blades, 100 grains.
Two blades broadhead with bleeder, 100 grains.
6.2 COMPONENTS BULLET SCREW-IN POINT
STEEL BULLET POINT
CODE 53G440
CODE 53C809
Screw-in point for threaded insert, available in different weights and two sizes. For 6.2 shafts we recommend using the 19/64” diameter.
Inexpensive iron points with bullet profile, available in many diameters and weights.
OD 7.54mm - 19/64 " 60,80,90,100 grains
OD 7.14mm - 9/32 " 75,100,125 grains OD 8.33mm - 21/64 " 125 grains
6.2 INSERT CODE 53P872 OD 7.44 mm 14.7 grains
3K carbon shaft which guarantees superior strength and an incomparable carbon look. Available as a shaft complete with threaded insert or arrow. Straightness +/- 0.006".
CODE 53U330 SHAFT CODE 53U334 Full-length ARROW with AAE MAX 2.0 VANES
SPINE
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER
400
9.31
32”
Ø 6.2 mm
Ø 7.64 mm
500
8.20
32”
Ø 6.2 mm
Ø 7.47 mm
600
7.48
32”
Ø 6.2 mm
Ø 7.37 mm
SGH BROADHEAD
SHOCKER BROADHEAD
SHOCKER WIDE BROADHEAD
CODE 53Q826
CODE 53F414
CODE 53Q835
Blunt point, 125 grains.
Blunt point, 100 grains.
6.2
Blunt point, 100 grains.
6.2 NOCK CODE 537422
6.2 3D NOCK CODE 53C412
NOCK 6.2 SHORT CODE 53P859
Weight: 10.2 grains
Weight: 9.9 grains
Weight: 10.5 grains
19
Good quality carbon shaft, recommended for 3D archery and hunting. Available both as a shaft and as fletched arrow with plastic vanes or natural feathers. Despite the low weight, which allows it to reach an excellent speed, it is a very strong shaft. Available in spines from 350 to 800, with 6.2 mm inside diameter and +/- 0.006" straightness. It can be used with traditional hunting bows, with bare bows or compound bows. The package includes shafts fletched or bare, nocks, inserts (installed or not, depending on whether the shaft is cut or is in full length). CODE CODE CODE CODE
53P149 SHAFT 53P143 ARROW cut to size (350-31 ", 400-30") 53S733 ARROW FULL LENGTH 53S614 ARROW with 3" SHIELD FEATHERS
SPINE
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER Ø 7.54 mm
350
8.6
32.5”
Ø 6.2 mm
400
8.1
32.5”
Ø 6.2 mm
Ø 7.47 mm
500
7.4
32.5”
Ø 6.2 mm
Ø 7.32 mm
6.8
32.5”
Ø 6.2 mm
Ø 7.21 mm
700
5.9
32.5”
Ø 6.2 mm
Ø 7.15 mm
800
5.75
32.5”
Ø 6.2 mm
Ø 7.12 mm
6.2
600
6.2 COMPONENTS BULLET SCREW-IN POINT
STEEL BULLET POINT
CODE 53G440
CODE 53C809
Screw-in point for threaded insert, available in different weights and two sizes. For 6.2 shafts we recommend using the 19/64” diameter.
Inexpensive iron points with bullet profile, available in many diameters and weights.
OD 7.54mm - 19/64 " 60,80,90,100 grains
OD 9/32 " 75,100,125 grains OD 21/64 " 125 grains
6.2 INSERT CODE 53P872 OD 7.44 mm 14.7 grains
An economic arrow ideal for both compound and traditional bow. Provided only as fully assembled arrow with either 2.5" Shield vanes or 3" Shield feathers. Supplied complete with installed insert and 100-grain screw-in point. Straightness +/- 0.010”.
CODE 53U286 ARROW with 2.5" SHIELD VANES CODE 53U290 ARROW with 3" SHIELD FEATHERS
SPINE
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER
7.48
31”
Ø 6.2 mm
Ø 7.33 mm
500
6.70
30”
Ø 6.2 mm
Ø 7.20 mm
600
5.64
30”
Ø 6.2 mm
Ø 7.10 mm
6.2
400
6.2 NOCK CODE 537422 Weight: 10.2 grains
6.2 3D NOCK CODE 53C412 Weight: 9.9 grains
NOCK 6.2 SHORT CODE 53P859 Weight: 10.5 grains
21
The Madera is a product born for the traditional market. Reliable and robust. It is the ideal choice for all those looking for a valid alternative to wooden arrows. The Madera is available as shaft with straightness +/-0.006" and as arrow in a more affordable version with straightness +/-0.010". CODE 53S343 SHAFT CODE 53S649 ARROW with 4”SHIELD FEATHERS SPINE
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER
500
7.4
32.5”
Ø 6.2 mm
Ø 7.52mm
600
6.8
32.5”
Ø 6.2 mm
Ø 7.40mm
700
5.9
32.5”
Ø 6.2 mm
Ø 7.35mm
800
5.75
32.5”
Ø 6.2 mm
Ø 7.12mm
The Madera Light offers great speed thanks to its low weight and is therefore particularly suitable for 3D competitions or for all those looking for a fast and performing arrow. The Madera Light is available as a shaft with +/-0.003" straightness or as a +/- 0.010" straightness arrow.
CODE 53S607 SHAFT
6.2
CODE 53U118 ARROW with 3"SHIELD FEATHERS. Straightness +/- 0.010 ”.
SPINE
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER
500
5.68
33”
Ø 6.2 mm
Ø 7.24 mm
600
5.11
33”
Ø 6.2 mm
Ø 7.21 mm
700
4.77
33”
Ø 6.2 mm
Ø7.17 mm
800
4.49
33”
Ø 6.2 mm
Ø 6.93 mm
6.2 COMPONENTS BULLET SCREW-IN POINT CODE 53G440 Screwed-in point, available in different weights and two sizes. For the Madera and Madera Light we recommend to use a 19/64" diameter. 7.54mm - 19/64 " 60,80,90,100 grains
6.2 INSERT CODE 53P872 OD 7.44 mm
14.7 grains
6.2 NOCK CODE 537422 Weight: 10.2 grains
6.2 3D NOCK CODE 53C412 Weight: 9.9 grains
NOCK 6.2 SHORT CODE 53P859 Weight: 10.5 grains
Large diameter shaft, designed for indoor archery. Its straightness (+/- 0.001") and weight consistency guarantee maximum precision. Bare shaft without components, to be completed with point and pin adapter or bushing.
CODE 53S503 SHAFT SPINE
GPI
LENGTH
INSIDE DIAMETER
OUTSIDE DIAMETER
350
10.30
33”
Ø 8.0 mm
Ø 9.28 mm
AURORA TRAVEL COMPANION SIGHT AND ACCESSORIES BAG Practical sight case, that also helps to better organize all your small accessories.
8.0
CODE 53F972
8.0 COMPONENTS 8mm BULLET POINT
8mm PIN POINT
8.0 PIN ADAPTER 8.0 SHAFT BUSHING for 4.2 NOCK CODE 53S594 Arrow ID 8.0 mm
CODE 53S601 OD 9.28 mm
CODE 53S597 120,150,200 grains
OD 9.28 mm
120,150,200 grains
17.4 grains
CODE 53S596
8.0 SHAFT BUSHING for 6.2 NOCK CODE 53S595
OD 8.94 mm 15.6 grains
Arrow ID 8.0 mm
11.4 grains
23
ARCHERY BATTLE ARROW CODE 53S997
FISHING ARROW CODE 53T001
FREEZE A quality bolt characterized by a particular white color which increases its visibility.
BOLTS
CODE 53S347 20 " CODE 53S510 22 "
GLADIATOR Crossbow bolt robust and economic. CODE 53S512 20” CODE 53S511 22”
COMPONENTS CROSSBOW BOLT MOON NOCK CODE 53S513 Moon nock, suitable for both models of Cross-X bolts and a wide range of other models. Diameter 8.8 mm. Available in color: green, red, black. Weight: 8 grains
THREADED INSERT FOR CROSSBOW BOLT CODE 53T004 Threaded insert for the use of a screwed-in point on a bolt. OD 8.81 mm
52 grains
CROSS-X SELECTION CHART
COMPOUND
RECURVE
23”
24”
25”
26”
27”
28”
29”
30”
31”
32”
2500
2500
2000
1800
1500
1300
1100
<15#
2500
2000
1800
1500
1300
1100
1000
15-19#
2000
1800
1500
1300
1100
1000
900
19-23#
16-21#
1500
1300
1100
1000
900
800
3.2 750 700
700
3.2 650 600
600
24-28#
22-28#
1300
1100
1000
900
800
3.2 750 700
700
3.2 650 600
600
3.2 550 500
29-34#
29-34#
1100
1000
900
800
3.2 750 700
700
3.2 650 600
600
3.2 550 500
500
35-39#
35-39#
1000
900
800
3.2 750 700
700
3.2 650 600
600
3.2 550 500
500
3.2 450 400
40-45#
40-45#
900
800
3.2 750 700
700
3.2 650 600
600
3.2 550 500
500
3.2 450 400
400
46-51#
46-51#
800
3.2 750 700
700
3.2 650 600
600
3.2 550 500
500
3.2 450 400
400
350
52-57#
52-57#
3.2 750 700
700
3.2 650 600
600
3.2 550 500
500
3.2 450 400
400
350
350
58-63#
58-63#
700
3.2 650 600
600
3.2 550 500
500
3.2 450 400
400
350
350
64-70#
3.2 650 600
600
3.2 550 500
500
3.2 450 400
400
350
350
NB: for the spines marked in red, consider an 80-grains points. Using 20 grains heavier or lighter points you need to increase or decrease the measured draw weight 5lbs respectively. NB: for the spines marked in black, consider a 100-grains points. Using 20 grains heavier or lighter points you need to increase or decrease the measured draw weight 5lbs respectively. NB: the table considers compound bows with declared speeds of 300-320 fps. For different speeds add 5 pounds every 20 feet per second more.
SPINE APP
CODE 53T149
Tool to measure the arrow spine, reads weight, spine and suggested bow draw weight for the used spine. Easy to use, very fast and practical, it is used with smartphones or Android tablets with OTG technology. It is only requested to download the free app that makes the instrument work. To download the app you can connect to the site www.spineapp.it, you can read the QR code engraved on the body of the instrument, or you can enter the Google Play Store. The package includes:
ACCESSORIES
- Wooden instrument Main body with sensors and integrated unit - Brass supports for the shaft - Calibration shaft - USB connection cable - USB adapter - Wooden support for smartphones - The instrument is already calibrated and ready for use.
25
NOCKS PIN NOCK CODE 537428 Nock pin available in the small version 0.088" and Large 0.098". Available in colors: red fluo, matt orange, matt white, matt yellow, matt green, green fluo, matt black. Weight: 2.7 grains
NOCK 5.9 mm CODE 53B926 Insert nock with inside diameter of 5.9 mm suitable for arrows defined as -49 or also H. Available in color: fluo green, fluo orange, fluo yellow, matt yellow, matt white. Weight: 9.9 grains
PIN NOCK LONG CODE 536012 Nock Pin with longer clips ideal for compound bows. Nock groove Large 0.098". Available in color: fluo red, matt yellow, matt green, matt orange. Weight: 2.7 grains
6.2 NOCK CODE 537422 Insert nocks for shafts with 6.2mm inside diameter. Known also as -60 or Super UNI. Available in the following colors: fluo yellow, fluo red, fluo green, orange matte, white matte, matte black, matte yellow, matte green. Weight: 10.2 grains
4.2 NOCK CODE 537409 Insert nock available in size Small 0.088" and Large 0.098". Available in color: fluo yellow, fluo red, fluo green, fluo orange, matt orange, matt white, matt black, matt yellow, matt green. Weight: 5.7 grains
6.2 3D NOCK CODE 53C412 Insert nocks for shafts with 6.2mm inside diameter. Known also as -60 or Super UNI. Profile particularly appreciated by 3D shooters. Available in color: matte black, matte green, matte orange, matte white, fluo green, fluo orange. Weight: 9.9 grains
NOCK 4.75 mm CODE 53F943 Insert nock with internal diameter of 4.5 mm suitable for arrows called -04 or for the Carbon Express MedallionÂŽ. Available in color: fluo green, fluo orange, fluo red, matt green, matt white, matt yellow. Weight: 6.6 grains.
NOCK 6.2 SHORT CODE 53P859
NOCK 5.2 CODE 53B921
CROSSBOW BOLT MOON NOCK CODE 53S513
ACCESSORIES
Nock for insert with internal diameter of 5.2 mm. Available in color: fluo blue, fluo green, matt orange, matt yellow, matt white. Weight: 8.7 grains
Insert nock with internal diameter of 6.2mm. The shorter body gives more solidity and therefore makes it more suitable for bows with a higher draw weight. Available in color: fluo green, fluo yellow, orange fluo, matt green, matt orange, matt white, matt yellow. Weight: 10.5 grains
Half moon nock, suitable for both models of Cross-X bolts and a wide range of other models. Diameter 8.8 mm.Available in color: green, red, black. Weight: 8 grains
PINS
3.2 COMP PIN CODE 53Q052 8.4 grains 8.3 grains 8.0 grains
PIN 4.2 COMP CODE 53Q049 #1 OD 6.06 mm #2 OD 5.75 mm #3 OD 5.43 mm
8.7 grains
PIN NANO SST® CODE 53H542 12.0 grains 11.4 grains 11.4 grains
PIN 4.2 EVO CODE 53S926 #2 OD 5.60 mm #3 OD 5.40 mm
OD 5.86 mm
#1 OD 5.40 mm #2 OD 5.39 mm
PIN NANO PRO® #2 CODE 53L440 8.4 grains 8.4 grains
Pin can be used on the Nano Pro shaft with spine from 600 to 900 or on the Medallion XR shaft from 1300 to 2000. OD 4.69 mm
PIN 4.2 BASIC CODE 53S921 #1 OD 5.80 mm #2 OD 5.50 mm #3 OD 5.30 mm #4 OD 5.10 mm
10.0 grains 10.0 grains 10.0 grains 10.0 grains
8.1 grains
OD 5.61 mm
8.1 grains
10.3 grains
6.2 PIN CODE 53S605 OD 7.41 mm
9.9 grains
8.0 PIN ADAPTER CODE 53S596 OD 8.94 mm
Steel protective ring, protects the back part of the ACE shaft against impact of other arrows. 5.0 grains
PROTECTICE COLLAR HELIOS CODE 53Q901 #1 OD 6.0 mm #2 OD 5.7 mm #3 OD 5.5 mm
13.5 grains 12.0 grains 10.2 grains
STEEL NOCK COLLAR CODE 53S930
5.2 PIN CODE 53U197 OD 6.20 mm
ACE® NOCK COLLAR CODE 537711
OD 5.21 mm
OD 5.16 mm
ACG® CODE 538394
7.5 grains
NOCK COLLARS
4.25 PIN ADAPTER ACE® CODE 537745
9.3 grains 9.0 grains
15.6 grains
OD 4.70 mm OD 4.85 mm OD 5.00 mm OD 5.15 mm OD 5.30 mm OD 5.45 mm OD 5.60 mm OD 5.75 mm OD 5.95 mm OD 6.35 mm OD 6.70 mm OD 7.15 mm OD 7.30 mm OD 7.45 mm OD 7.60 mm
5.0 grains 4.8 grains 5.3 grains 4.5 grains 5.2 grains 5.2 grains 5.7 grains 5.9 grains 6.7 grains 6.4 grains 7.1 grains 7.3 grains 6.8 grains 7.7 grains 7.9 grains
ACCESSORIES
#1 OD 5.11 mm #2 OD 4.80 mm #3 OD 4.63 mm
PIN MEDALLION® 4.75 CODE 53P481
27
BUSHINGS AND INSERTS
4.2 NOCK BUSHING CODE 53C459 Arrow ID Arrow ID Arrow ID Arrow ID
4.7 mm 5.2 mm 5.9 mm 6.2 mm
5.2 THREADED INSERT CODE 53S969 1.5 grains 3.0 grains 7.5 grains 8.7 grains
Adapter that allows you to use a 4.2 insert nock on shafts with a larger diameter.
19.5 grains
Threaded insert to mount a screw-in point on a 5.2mm shaft. The slight tapered outside part, that reaches the 7.34mm diameter where the point is screwed on, gives the shaft higher protection.
BUSHING RD SHAFT 6.2 NOCK 4.2 CODE 53S593
6.2 THREADED INSERT CODE 53P872
Arrow ID 6.2 mm
Arrow ID 6.2 mm OD 7.44mm
7.8 grains
14.7 grains
Adapter that allows you to use a 4.2 insert nock on shafts with a 6.2 inside diameter. Anodized red aluminum.
Threaded insert to adapt a screw-in point on a 6.2 mm inside diameter shaft.
8.0 SHAFT BUSHING for 4.2 NOCK CODE 53S594
ACE® BREAK OFF INSERT CODE 539023
Arrow ID 8.0 mm
Arrow ID 4.25 mm OD 5.25mm
17.4 grains
39-49-59 grains
Adapter that allows you to use a 4.2 insert nock on shafts with a 8.0 mm inside diameter.
Threaded insert to use a screw-in point ACE® on a 4.25 mm inside diameter shaft. The 10 grains two stages help optimize the total weight of the point.
8.0 SHAFT BUSHING for 6.2 NOCK CODE 53S595
ACG® BREAK OFF INSERT CODE 539420
Arrow ID 8.0 mm
Arrow ID 4.25 mm OD 5.70 mm
11.4 grains
Adapter that allows you to use a 6.2 insert nock on 8.0 inside diameter shafts.
X-BUSTER® 600-700 BUSHING for 6.2 NOCK CODE 53F682 Adapter that allows you to use a 6.2 insert nock on a 600-700 X-BUSTER® shaft. Weight: 6.3 grains
ACCESSORIES
OD 6.07 mm
CXL® / X-BUSTER® BUSHING for 6.2 NOCK CODE 537712 Adapter that allows you to use a 6.2 insert nock on a CXL®/X-BUSTER®/TANK® up to 500 spine. Weight: 9.9 grains
59 grains
Threaded insert to use a screw-in ACE®point on a 540480-430 spine 4.25 mm inside diameter ACG®shaft. The two 10 grains stages help to optimize the total weight of the point. ALUMINUM ARROW INSERT CODE 53B995 Arrow Arrow Arrow Arrow Arrow
2018 2018A 2117 2216 2219
OD OD OD OD OD
7.90 mm 7.90 mm 8.33 mm 8.75 mm 8.75 mm
18.5 18.9 23.7 28.5 28.0
grains grains grains grains grains
PLASTIC VANES
NATURAL FEATHERS
1.75” PARABOLIC PLASTIC VANES
2" SHIELD FEATHERS
CODE 53Q135
CODE 53S748
2.00” PARABOLIC PLASTIC VANES
3" SHIELD FEATHERS
CODE 53Q143 CODE 53S757
2.00" SHIELD PLASTIC VANES
4" SHIELD FEATHERS CODE 53Q167 4.00" PARABOLIC PLASTIC VANES CODE 53S766
BARRED 4" SHIELD FEATHERS
CODE 53Q151 All the plastic vane models are available in color:
BK
YL
WH
RD
BL
GR
1.75” SHIELD NERVE PLASTIC VANES
OR CODE 53S784
4" PARABOLIC NATURAL FEATHERS CODE 53S971 2.5” SHIELD NERVE PLASTIC VANES CODE 53S775 All the natural feathers models are available in colors: black, blue, fluo green, fluo yellow, orange, red, white, yellow.
CODE 53S970
BK
BL
FG
FY
OR
RD
WH
YL
ACCESSORIES
2.5” PARABOLIC NERVE PLASTIC VANES
CODE 53S972 All plastic vane NERVE models are available in color:
BK
BL
GR
WH 29
RD
OR
YL
HP
GLUE IN POINTS 3.2 COMP HS POINT
4.2 EVO POINT
CODE 53R408
CODE 53E740
#1 for spine 350 - 450 #2 for spine 500 - 650
120 grains 120 grains
Points with diameter 3.2 mm suitable for every Plurima and Exentia shaft and also Easton X10®.
100 grains 80 grains 70 grains
Points made of steel with diameter of 4.2 mm. They fit Ambition arrows and similar. Available in three different weights. 4.2 BASIC POINT
3.2 COMP POINT
CODE 53P807
CODE 53S424 #1 for spine 350 - 450 #2 for spine 500 - 650 #3 for spine 700 - 800
#1 OD 5.86 mm #2 OD 5.75 mm #3 OD 5.45 mm
100 - 120 grains 100 - 120 grains 100 - 120 grains
Point made of high resistance steel. Available in three ranges of weight, in break off version with two 10 grains removable sections. They fit also Easton X10® shafts. VIKING X10® POINT
CODE 539457 OD 4.77 mm
High resistance stainless steel point with Viking profile suitable for any 3.2 mm diameter shaft like Plurima or Easton X10 ®. Available in 100, 105, 110 and 115 grains weight. 4.2 AERO POINT
#1 #2 #3 #4
OD 5.90 mm OD 5.65 mm OD 5.46 mm OD 5.20 mm
70 grains 70 grains 50,70 grains 50 grains
Inexpensive 4.2 mm nickel-plated iron point, suitable for entry level arrows. The external diameter of the different sizes changes to suit the different sizes of shafts. 4.2 HELIOS POINT
CODE 53P948 OD 6.3 mm 80-90-100 grains
Specific point for spine 500 of the Helios arrow. Break-off point with two 10 grains removable stages.
ACE® VIKING - 00 POINT CODE 537696
CODE 53S588 #1 OD 5.48 mm 120 - 140 grains #2 OD 5.35 mm 100 - 120 grains #3 OD 5.35 mm 70 - 90 grains
ACCESSORIES
4.2 mm inside diameter shafts, high resistance stainless steel point.
Exclusive points with wind tunnel tested and optimized profile. Produced with the maximum precision and weight selected in 6 pieces packages. They guarantee a perfect flight, a greater protection of the shaft and an easier pull from the target. OD 5.25 mm
50, 60, 70, 80, 90, 100, 110, 120 grains
4.2 COMP POINT
ACE® OGIVE - 00 POINT
CODE 53P873
CODE 532577
#1 OD 5.67 mm 100 - 130 grains #2 OD 5.81 mm 90 - 120 grains #3 OD 5.44 mm 70 - 100 grains
4.2 mm diameter high resistance stainless steel point. Fits most 4.2 mm shafts on the market. The points have break off 10 grains stages in order to obtain the desired weight.
Viking point with smoother profile that is ideal for clicker use. Point produced with the maximum accuracy and grouped in 6 pieces pack with the same identical weight. The size 00 fits Easton ACE® and ACG® arrows. OD 5.25mm
80, 90, 100, 110 grains
ACE®/ ACG® BREAK OFF POINT
5.2 POINT
CODE 537744
CODE 53U361
ACE OD 5.70 mm 100-110-120, 80-90-100, 60-70-80 grains ACG OD 5.74 mm 100-110-120 grains
Break off
120-110-100 grains
Stainless steel Easton ACE® and ACG® shafts points, with excellent tolerances of weights and sizes. Break-off model with two removable 10 grains stages. VAP® BREAK OFF 3D POINT
B-ONE POINT
CODE 53N239
CODE 53B909
OD 5.65 mm 100-110-120, 80-90-100, 60-70-80 grains
ARROW ID 5.2mm OD 6.21 ARROW ID 5.9mm OD 6.50
4.2 and VAP shafts®point, with a peculiar, longer ogive profile. Highly appreciated especially for 3D archery.
Inexpensive point with only one removable 10 grains section. Available in a wide range of sizes and weights.
NANO SST® BREAK OFF POINT
IN/OUT BREAK OFF POINT
CODE 53H545
CODE 53E634 100-120, 90-100 grains 100-110, 80-90 grains
ARROW ID 5.2mm ARROW ID 5.9mm ARROW ID 6.2mm
70-80-90-100 grains 80-90-100 grains 80-90-100 grains
VAP 500/700 VAP 600/800
60-70-80-90 grains 60-70-80-90 grains
Stainless steel points made for Carbon Express Nano SST® shafts. High quality at a reasonable price.
Stainless steel points that cover the the last millimeter of the shaft as well, in order to protect it better.
MEDALLION® POINT
6.2 VIKING POINT
CODE 539418
CODE 537704
- 04 OD 5.83 mm 90-100-110, 60-70-80 grains 50-60 grains -XR 1300-2000 OD 4.75 mm
OD 7.26mm
High quality stainless steel points
5.2 BREAK OFF POINT
Extremely precise point with a special profile tested and optimized in the wind tunnel. 6.2 mm diameter (also called -60). Sold in packs of 6 pieces selected by weight.
6.2 BREAK OFF
CODE 53I670 OD 6.62 mm
60,70,80,90,100,110 grains
60-70-80-90 grains
CODE 531988 OD 7.37mm
80-90-100 grains
Point with particular profile suitable for shooting on 3D targets. The three breakable sections allows you to vary the point weight from 60 to 90 grains.
Breakable point for shaft with internal diameter of 6.2 mm.
5.2 ONE PIECE POINT
VIKING CXL®/X BUSTER®/TANK® POINT
CODE 53H766 OD 6.35 mm
CODE 537686 70 grains
Point with a bullet profile for target shooting.
OD 8.81mm
100, 120, 140, 160 grains
Viking point that can be used on the 0.318" inside diameter (about 8.08 mm) Carbon Express CXL 1®/ X Buster®and Tank® shafts. The Viking point comply with the WA standards about the maximum diameter allowed, they are particularly suitable to protect the shaft and facilitate the pull from straw targets.
31
ACCESSORIES
#1 OD 5.53 mm #2 OD 4.96 mm
70-80,90-100 grains 80-90 grains
GLUE IN POINTS CXL®/XBUSTER®/TANK® POINTS
8mm BULLET POINT
CODE 53C268 OD 9.28 mm
120,140,160,180 grains
CODE 53S601
Inexpensive points for Carbon Express shafts with inside diameter of 0.318" (about 8.08 mm) like the CXL® / X Buster®and Tank®.
Stainless steel points for shafts with internal diameter of 8 mm. Classic bullet shape.
ALUMINIUM SHAFT STEEL POINT
8mm PIN POINT
CODE 539013 Arrow 1214 Arrow 1413 Arrow 1416 Arrow 1516 Arrow 1616 Arrow 1716 Arrow 1816 Arrow 1916
OD 5.19 mm OD 5.60 mm OD 5.71 mm OD 6.15 mm OD 6.52 mm OD 6.80 mm OD 7.30 mm OD 7.40 mm
46.8 grains 36.3 grains 50.7 grains 54.3 grains 63.3 grains 66.9 grains 74.1 grains 82.2 grains
OD 9.28 mm
120,150,200 grains
CODE 53S597 OD 9.28 mm
120,150,200 grains
Stainless steel points for shafts with inside diameter of 8 mm. Conical shape.
SCREW-IN POINTS 3D POINT
ACE® THREADED POINT
CODE 53N750 5/16” 11/32”
60,80,100 grains 80,100,125 grains
A nickel-plated steel point for wooden arrows, parallel and threaded. Available for diameters 5/16 "and 11/32" in a good range of weights.
Weight: 31,36,41,46,51 grains
Points for the insert system of Easton ACE®, perfectly compatible with the originals, they are made in stainless steel with the maximum accuracy of weight.
STEEL BULLET POINT
STEEL FIELD POINT
CODE 53C809
CODE 53C800
9/32” 11/32” 21/64”
75,100,125 grains 100,125 grains 125 grains
Inexpensive iron points with bullet profile, available in many diameters and weights.
BULLET SCREW-IN POINT
ACCESSORIES
CODE 537743
CODE 53G440 9/32” 19/64”
60,80,100 grains 60,80,90,100 grains
Standard thread screw-in point available in 9/32" (7.15mm) or 19/64" (7.54mm) diameters. They fit on a multitude of shaft available on the market. A rubber O-ring near the collar prevents the vibrations to unscrew it. Available in a wide range of weights. NOTE: X10®, ACE® and ACG® are trademarks registered by Easton® Archery.
5/16” 9/32” 11/32” 21/64”
75,100,125 grains 75,100,125 grains 100,125 grains 125 grains
Inexpensive iron point with Field profile, available in many different diameters and weights. SCREW-IN PIN POINT CODE 53T060 9/32” 19/64”
70 grains 60,70,80,100 grains
Stainless steel screw-in points with a particularly aggressive Pin-Point profile. Ideal for use in 3D shooting. Available in sizes 9/32 "and 19/64".
NOTE: CXL®, X-BUSTER®, TANK®, NANO®, NANO SST®, MEDALLION XR® are trademarks registered by CARBON EXPRESS®.
SPECIAL POINTS BROADHEAD ADAPTER
BLUNT POINT CODE 536043 5/16” 11/32”
CODE 53C017 SHORT CODE 53C016 LONG Weight: 74.7 grains short/ 100.5 grains long
Adapters designed to fit broadheads like Zwickey® on standard threaded inserts. Available in both Long and Short versions.
44 grains 88 grains
Blunt points made of rubber to be inserted over the arrows. Available in two different diameters 5/16" (7.94mm) and 11/32" (8.73mm).
FISHING POINT
LARP POINT
CODE 53R074
CODE 53Q873 GREEN CODE 53P578 ORANGE
Arrow OD 8.17mm
310 grains
Sold in a two pieces pack.
Rubber point for role-playing games or simply to allow safe shooting. Supplied with threaded insert that can be used on many arrows available on the market. Available in two different colors.
WHISTLING POINT
CODE 53P636 Weight: 126.6 grains
Screw-in point that applied to the shaft emits a whistle while flying.
FLETCHER
GLUE
CODE 53S998 HOT MELTING GLUE CODE 537242 long CODE 53B736 short
VANES GLUE CODE 534328
ACCESSORIES
Simple and practical fletcher that allows you to fletch any diameter shafts with three, four or six vanes.
33
ARROW NUMBERING DECALS
CODE 53P094 Practical transferable numbers applicable on any arrow to identify the number of the same. Available in various colors.
ARROW NUMBERING TAPE CODE 53S155 Available in four different colors and usable as a normal ribbon to fix the vanes with the advantage of being able to number your arrows.
WRAPPING TAPE CODE 53P098 The package contains 48 fixing strips for Spin WingÂŽ type vanes or similar in the declared size (3 or 5 cm long and 5 mm high). The tape has a very good hold and bright colors or with the colors of national flags to personalize your arrows.
WRAPS
ACCESSORIES
CODE 53P360 Wrap for carbon, aluminum or wood shafts in bright colors. They increase the visibility of the arrow on the target and add a touch of personality to the shaft. Simple to apply and with an excellent seal, they offer a better base for gluing plastic vanes or for applying double sided adhesive vanes. Furthermore, the removal of the vanes is much simpler and cleaner and there is no risk of damaging the shaft.
ARROW CARRYING CASE CODE 53S429
T-SHIRT CODE 661906
ARM SLEEVES CODE 53T003
ACCESSORIES
CAP CODE 53T002
35
The products, represented in this catalog, are subject to continuous updating, the characteristics and specifications of the same can therefore change at any time without notice. All images and texts in this catalog are property of Bignami S.p.A. and are protected by applicable copyright laws. Any use, even partial and in any form, must be previously authorized in writing by Bignami S.p.A. Š Bignami - November 2019
ENG