INDEX 3.2
2 3 4 5 6
The Cross-X Plurima shaft is made of a high module carbon (40 tons), precise (straightness +/- 0.001") and available in spines from 350 to 800 (10 different sizes) with internal diameter of 3.2 mm. The Cross-X Plurima is a strong and precise shaft to obtain maximum performance in target shooting, suitable for both compound and olympic archers. Inside components compatible with the one of the X10®. CODE 53P166 SHAFT
7 8
SPINE
GPI
LENGHT
DIAMETER INSIDE
10
350
9.07
32”
Ø 3.2 mm
400
8.34
32”
Ø 3.2 mm
450
7.76
32”
Ø 3.2 mm
500
7.23
32”
Ø 3.2 mm
550
6.75
32”
Ø 3.2 mm
600
6.46
32”
Ø 3.2 mm
650
6.12
32”
Ø 3.2 mm
5.2 4.2
11 12 13 14
700
5.79
32”
Ø 3.2 mm
750
5.59
32”
Ø 3.2 mm
15
800
5.35
32”
Ø 3.2 mm
16
COMPONENTS 3.2
18
POINT 3.2 COMP
8.0 6.2
18
19 20
BOLTS ACCESSORIES
17
20 SPECIAL ARROWS NOCKS PIN PROTECTIVE COLLARS BUSHING AND INSERTS PLASTIC VANES NATURAL FEATHERS GLUE-IN POINTS SCREW-IN POINTS SPECIAL POINTS GLUE FLETCHER ACCESSORIES PROMOTIONAL ITEMS
21 22 23 23 24 25 25 26 28 29 29 29 30 31
CODE 53S424 #1 for spine 350 - 450 #2 for spine 500 - 650 #3 for spine 700 - 800
100 - 120 grains 100 - 120 grains 100 - 120 grains
POINT 3.2 COMP HS CODE 53R408 #1 for spine 350 - 450 #2 for spine 500 - 650
120 grains 120 grains
PIN 3.2 COMP CODE 53Q052 #1 for spine 350 - 450 #2 for spine 500 - 650 #3 for spine 700 - 800
8,4 grains 8,1 grains 7,8 grains
NOCK PIN CODE 537428 Available with large or small groove. Weight: 2,7 grains
NOCK PIN LONG CODE 536012 Available with large groove only. Weight: 2,7 grains
3.2 DIAMETER EXTERNAL Ø 5.38 mm Ø 5.27 mm Ø 5.16 mm Ø 5.03 mm Ø 4.98 mm Ø 4.85 mm Ø 4.81 mm
PLURIMA CUBE For everyone who is looking for an excellent product at a more competitive price, Cross-X offers the Cube version of the Plurima shaft. The Plurima Cube has the same weight and spine characteristic but with straightness of +-/- 0.003". The shaft is sold in a 12 pieces pack with installed pin. Each dozen is selected and grouped by weight and spine.
Ø 4.72 mm Ø 4.70 mm Ø 4.64 mm
CODE 53S348
ADDITIONAL COMPONENTS BEITER NOCK PIN CODE 53F693 Weight: 5 grains XS WING
CODE 53E450
EXENTIA Based on Plurima shaft, Cross-X offers Exentia: a product suitable for those with a more limited budget that still wants to be able to use a shaft of the highest level. The weight characteristics remain the same but in this case the straightness is +/- 0.005 ". Only available as shaft with pins for the installation of all the nock pin available on the market.
The XS Wings are available in a large selection of colors and sizes. CODE 53S359 SHAFT EASTON TUNGSTEN POINT
CODE 535668 Break off point of high accuracy. Tungsten allows you to obtain a higher weight with a reduced size. Weight: 120 - 110 - 100 grains
3
An incredibly versatile shaft that, thanks to the use of a 40-ton high module carbon, offers an incredible lightness that makes it suitable for many uses, from target shooting to field shooting and also 3D. The Hurricane shaft is available in three different levels of straightness.
HURRICANE CUBE Shaft with straightness +/- 0.003".
CODE 53S517 SHAFT
HURRICANE PENTA
4.2
Shaft with straightness +/- 0.005".
CODE 53S525 SHAFT
HURRICANE OCTAGON Shaft with straightness +/- 0.008"
CODE 53S532 SHAFT CODE 53S539 ARROW complete with AIR 2" vanes. SPINE
GPI
LENGHT
DIAMETER INSIDE
DIAMETER EXTERNAL
500*
5.84
32,5”
Ø 4.2 mm
Ø 5.44 mm
600
5.84
32,5”
Ø 4.2 mm
Ø 5.41 mm Ø 5.48 mm
700
5.79
32,5”
Ø 4.2 mm
800
5.30
32,5”
Ø 4.2 mm
Ø 5.38 mm
900
5.00
32,5”
Ø 4.2 mm
Ø 5.30 mm
1000
5.21
32,5”
Ø 4.2 mm
Ø 5.38 mm
1100
5.50
32,5”
Ø 4.2 mm
Ø 5.40 mm
* Available only in the Cube version. For this spine use the point 4.2 AERO #1.
COMPONENTS 4.2 POINT 4.2 AERO
POINT 4.2 COMP.
POINT 4.2 EVO
CODE 53S588
CODE 53P873
CODE 53E740
#1 OD 5,48 mm #2 OD 5,35 mm #3 OD 5,35 mm
#1 OD 5,67 mm #2 OD 5,81 mm #3 OD 5,44 mm
#1 OD 5,86 mm #2 OD 5,75 mm #3 OD 5,45 mm
120 - 140 grains 100 - 120 grains 70 - 90 grains
100 - 130 grains 90 - 120 grains 70 - 100 grains
100 grains 80 grains 70 grains
Shaft made of high quality carbon available in spines from 350 to 1000 with an internal diameter of 4.2 mm. Precise and robust suitable for target shooting, field and 3D. Dedicated internal components. The Maior shaft is available in three different levels of straightness.
MAIOR CUBE Shaft with straightness +/- 0.003".
CODE 53P158 SHAFT
MAIOR PENTA
4.2
Shaft with straightness +/- 0.005".
CODE 53S546 SHAFT
MAIOR OCTAGON Shaft with straightness +/- 0.008".
CODE 53S554 SHAFT CODE 53S561 ARROW complete with AIR 2" vanes. SPINE
GPI
LENGHT
DIAMETER INSIDE
350
9.52
32”
Ø 4.2 mm
Ø 6.09 mm
400
8.58
32”
Ø 4.2 mm
Ø 5.92 mm
500
7.67
32”
Ø 4.2 mm
Ø 5.75 mm
600
6.97
32”
Ø 4.2 mm
Ø 5.69 mm
700
6.27
32”
Ø 4.2 mm
Ø 5.56 mm
800
5.79
32”
Ø 4.2 mm
Ø 5.47 mm
900
5.06
32”
Ø 4.2 mm
Ø 5.32 mm
1000
4.34
32”
Ø 4.2 mm
Ø 5.24 mm
PIN 4.2 COMP. CODE 53Q049 #1 OD 6,06 mm #2 OD 5,75 mm #3 OD 5,43 mm
DIAMETER EXTERNAL
12,0 grains 11,4 grains 11,4 grains
NOCK PIN CODE 537428 Weight: 2,7 grains
NOCK 4.2 CODE 537409 Weight: 5,7 grains
5
An extremely versatile shaft suitable for multiple uses, from target to 3D archery. Equipped with good characteristics of lightness and strength. Characterized by a straightness of +/- 0.003 ".
4.2
CODE 53S323 SHAFT CODE 53S331 ARROW SPINE
GPI
LENGHT
DIAMETER INSIDE
EXTERNAL DIAMETER
500
8.14
32”
Ø 4.2 mm
Ø 5.95 mm
600
6.96
32”
Ø 4.2 mm
Ø 5.75 mm
700
6.49
32”
Ø 4.2 mm
Ø 5.61 mm
800
6.02
32”
Ø 4.2 mm
Ø 5.51 mm
900
5.77
32”
Ø 4.2 mm
Ø 5.47 mm
1000
5.15
32”
Ø 4.2 mm
Ø 5.33 mm
BOHNING AIR VANES
CODE 53N853
Vane with the same lower profile of the ICE, but with a shield cut on the tail like the X-Vane. Built especially for target shooting, has an excellent yield on long range shots and very light arrows. Length 2", hight 0.3". Weight 4.5 grains
COMPONENTS 4.2 POINT 4.2 AERO
POINT 4.2 COMP.
POINT 4.2 EVO
CODE 53S588
CODE 53P873
CODE 53E740
#1 OD 5,48 mm #2 OD 5,35 mm #3 OD 5,35 mm
#1 OD 5,67 mm #2 OD 5,81 mm #3 OD 5,44 mm
#1 OD 5,86 mm #2 OD 5,75 mm #3 OD 5,45 mm
120 - 140 grains 100 - 120 grains 70 - 90 grains
100 - 130 grains 90 - 120 grains 70 - 100 grains
100 grains 80 grains 70 grains
Carbon shaft with an internal diameter of 4.2 mm featuring a bamboo finish. Beautiful and elegant, it comes with protective collars. The straightness for this shaft is +/- 0.003 ". Available as shaft and arrow in spines from 500 to 1000. Strong shaft dedicated to traditional shooting.
SPINE
GPI
LENGHT
DIAMETER INSIDE
DIAMETER EXTERNAL
500
9.25
33”
Ø 4.2 mm
Ø 5.90 mm
600
7.76
33”
Ø 4.2 mm
Ø 5.70 mm
700
6.77
33”
Ø 4.2 mm
Ø 5.55 mm
800
6.32
33”
Ø 4.2 mm
Ø 5.50 mm
900
5.68
33”
Ø 4.2 mm
Ø 5.36 mm
1000
5.10
33”
Ø 4.2 mm
Ø 5.25 mm
4.2
CODE 53N758 SHAFT CODE 53N766 ARROW WITH NATURAL FEATHERS
The aluminum collars supplied with the Helios shafts are also available separately as accessories. PROTECTIVE COLLAR CODE 53Q901 #1 OD
#2 OD
#3 OD
6.0mm 13,5 grrains 5.7 mm 12,0 grains 5.5mm 10,2 grains
The 500 spine needs a specific point. This point can be sectioned with two removables stages of 10 grains each. POINT 4.2 HELIOS
CODE 53P948 OD 6,3 mm
80-90-100 grains
PIN 4.2 COMP. CODE 53Q049 #1 OD 6,06 mm #2 OD 5,75 mm #3 OD 5,43 mm
12,0 grains 11,4 grains 11,4 grains
NOCK PIN CODE 537428 Weight: 2,7 grains
NOCK 4.2 CODE 537409 Weight: 5,7 grains
7
A shaft that over the years has achieved remarkable results and a large audience of admirers in different fields of use, from target to 3D shooting. The shaft is complete with nock, pin and point not installed for cutting the shaft at the desired length. The wide availability of spines and internal components, typical of high ends arrows, makes it the ideal shaft for the first competitions and for those looking for an excellent product at an unbeatable price. Straightness of +/-0.003". CODE 53E726 SHAFT
4.2
CODE 53Q223 ARROW complete with vanes ARIZONA EP16 vanes.
SPINE
LENGHT
GPI
DIAMETER INSIDE
DIAMETER EXTERNAL
WEIGHT POINT
500
33”
8.1
Ø 4.2 mm
Ø 5,86 mm
100
600
33”
7.0
Ø 4.2 mm
Ø 5,65 mm
80
700
33”
6.3
Ø 4.2 mm
Ø 5,55 mm
80
800
33”
5.9
Ø 4.2 mm
Ø 5,42 mm
70
900
33”
5.5
Ø 4.2 mm
Ø 5,35 mm
70
1000
33”
5.0
Ø 4.2 mm
Ø 5,33 mm
70
1100
33”
4.9
Ø 4.2 mm
Ø 5,26 mm
70
1300
33”
4.7
Ø 4.2 mm
Ø 5,17 mm
70
1500
33”
4.2
Ø 4.2 mm
Ø 5,10 mm
70
1800
33”
3.9
Ø 4.2 mm
Ø 5,06 mm
70
COMPONENTS 4.2 POINT 4.2 AERO
POINT 4.2 COMP.
POINT 4.2 EVO
CODE 53S588
CODE 53P873
CODE 53E740
#1 OD 5,48 mm #2 OD 5,35 mm #3 OD 5,35 mm
#1 OD 5,67 mm #2 OD 5,81 mm #3 OD 5,44 mm
#1 OD 5,86 mm #2 OD 5,75 mm #3 OD 5,45 mm
120 - 140 grains 100 - 120 grains 70 - 90 grains
100 - 130 grains 90 - 120 grains 70 - 100 grains
100 grains 80 grains 70 grains
AMBITION GOLD EDITION The Ambition shaft that has proven over the years its own quality, now presents itself in the new Gold Edition version that, in addition to the golden finish on the back of the shaft, presents a remarkable straightness of +/- 0.001" proposing itself as a great choice for target shooting.
CODE 53S572 SHAFT
4.2
NOTE: the shaft Gold Edition is not equipped with the point that has to be purchased separately.
AMBITION SILVER EDITION In this particular version, the shaft has a silver color crest, that makes it even more catchy. Straightness of +/-0.003". CODE 53R100 SHAFT
NOCK PIN CODE 537428 PIN 4.2 COMP. CODE 53Q049
PIN 4.2 EVO CODE 53S926
#1 OD 6,06 mm #2 OD 5,75 mm #3 OD 5,43 mm
#2 OD 5,80 mm #3 OD 5,40 mm
12,0 grains 11,4 grains 11,4 grains
Weight: 2,7 grains
8,4 grains 8,4 grains
NOCK 4.2 CODE 537409 Weight: 5,7 grains
9
Shaft made of a composite fiber-carbon with an internal diameter of 4.2 mm and spine from 600 to 1800. Its strength combined with the excellent price, makes it an excellent choice for archery schools, beginners and 3D shooters. The Exordium is complete with pin, nock pin and point. • Straightness: +/-0.006".
CODE 53Q811 SHAFT (lenght: 33” for every spine) CODE 53N775 ARROW The Exordium is also offered as a complete arrow with plastic vanes of 1.6" lenght and parabolic profile, complete of nock and point already glued in the shaft. The lenght varies according to the spine as specified in the table below.
4.2
CODE 53P886 ARROW FLETCHED WITH NATURAL FEATHERS The Exordium, in the spine from 600 to 1300, is also offered as arrow with natural feathers of 3" and shield profile. Even in this case the length varies with the spine and the point is already glued in the shaft.
SPINE
GPI
LENGHT ARROW
LENGHT SHAFT
DIAMETER INSIDE
DIAMETER EXTERNAL
WEIGHT POINT
600
8.48
32”
33”
Ø 4.2 mm
Ø 5.87 mm
70
700
7.48
31”
33”
Ø 4.2 mm
Ø 5.70 mm
70
800
7.03
30”
33”
Ø 4.2 mm
Ø 5.61 mm
70
900
6.59
30”
33”
Ø 4.2 mm
Ø 5.52 mm
70
1000
6.32
29”
33”
Ø 4.2 mm
Ø 5.48 mm
70
1100
5.96
28”
33”
Ø 4.2 mm
Ø 5.40 mm
50
1200
5.72
28”
33”
Ø 4.2 mm
Ø 5.36 mm
50
1300
5.32
28”
33”
Ø 4.2 mm
Ø 5.28 mm
50
1500
5.23
27”
33”
Ø 4.2 mm
Ø 5.25 mm
50
1800
4.59
27”
33”
Ø 4.2 mm
Ø 5.11 mm
50
COMPONENTS 4.2 POINT 4.2 EVO
POINT 4.2 BASIC
CODE 53E740 #1 OD 5,86 mm #2 OD 5,75 mm #3 OD 5,45 mm
CODE 53P807 100 grains 80 grains 70 grains
#1 OD 5,90 mm 70 grains #2 OD 5,65 mm 70 grains #3 OD 5,46 mm 50,70 grains #4 OD 5,20 mm 50 grains
PIN 4.2 BASIC CODE 53S921 #1 #2 #3 #4
OD OD OD OD
5,80 mm 5,50 mm 5,30 mm 5,10 mm
10,0 grains 10,0 grains 10,0 grains 10,0 grains
The new Cross-X Iridium arrow has the same structure has the Exordium arrow, but thanks to the vibrant colors of the crest it is immediately recognizable. The Iridium arrow is provided with nock, vanes and points already inserted. Straightness +/-0.006". CODE 53Q946 ARROW
SPINE
GPI
LENGHT
DIAMETER INSIDE
DIAMETER EXTERNAL
700
7.56
31”
Ø 4.2 mm
Ø 5.70 mm
900
7.16
30”
Ø 4.2 mm
Ø 5.52 mm
1100
5.80
28”
Ø 4.2 mm
Ø 5.48 mm
EGERTEC GAME TARGETS
4.2
CODE 53R809
Beautiful game targets with very nice designs and vibrant colors. When practice becomes heavy they help lighten the atmosphere. Target characteristics: • dimensions 50 x 70 cm • resistant cardboard of 250g/m2 • laminated • tear-proof paper.
NOCK PIN CODE 537428 Weight: 2,7 grains
NOCK 4.2 CODE 537409 Weight: 5,7 grains
11
The Element arrow is at the base of the Cross-X program with a diameter of 4.2 mm. It is a robust and economic arrow with the purpose of bringing people close to archery. Available in a limited number of spines that fits who is approaching archery. Straightness +/-0.006".
4.2
CODE 53S853 ARROW
SPINE
GPI
LENGHT
DIAMETER INSIDE
DIAMETER EXTERNAL
700
5.9
31”
Ø 4.2 mm
Ø 5.5 mm
900
5.3
30”
Ø 4.2 mm
Ø 5.35 mm
1100
4.4
28”
Ø 4.2 mm
Ø 5.2 mm
1300
4.1
28”
Ø 4.2 mm
Ø 5.12 mm
1500
3.6
28”
Ø 4.2 mm
Ø 5.0 mm
NOTE: The points included with the arrows are points in nickel-plated steel, with a weight of 70 grains and external diameter of 5,5mm for the spine from 700 to 900. The arrows in the spine from 1100 to 1500 have instead a point of 50 grains and external diameter of 5,2mm.
COMPONENTS 4.2 POINT 4.2 BASIC
NOCK 4.2 CODE 537409 Weight: 5,7 grains
CODE 53P807 #1 #2 #3 #4
OD OD OD OD
5,90 mm 5,65 mm 5,50 mm 5,20 mm
70 grains 70 grains 50,70 grains 50 grains
Light and fast carbon shaft, available as a shaft or arrow with spine from 340 to 800. Made using the versatile internal diameter of 5.2 mm, for those looking for an economic solution for 3D without sacrificing performance and quality. Specific internal components. Provided with nock and point non-installed. Straightness +/-0.005". CODE 53G398 SHAFT
SPINE
GPI
LENGHT
DIAMETER INSIDE
DIAMETER EXTERNAL
340
8.6
33”
Ø 5.2 mm
Ø 6.68mm
400
7.4
33”
Ø 5.2 mm
Ø 6.51 mm
500
6.3
33”
Ø 5.2 mm
Ø 6.33 mm
600
6.0
33”
Ø 5.2 mm
Ø 6.31 mm
700
5.2
33”
Ø 5.2 mm
Ø 6.20 mm
800
4.7
33”
Ø 5.2 mm
Ø 6.09 mm
CODE 53R563
5.2
CODE 53H978 ARROW WITH PLASTIC VANES CODE 53H985 ARROW WITH NATURAL FEATHERS
CODE 53I061
CODE 53I056 BOOSTER TARGETS MFT 2D Booster offers a line of 2D targets, they are a perfect solution for those who wants to approach the practice of 3D shooting with a limited budget. THREADED INSERT 5.2 CODE 53S969
COMPONENTS 5.2
Weight: 18,9 grains
POINT 5.2 BREAK OFF
POINT 5.2
BULLET SCREW-IN POINT
CODE 53I670
CODE 53H766
CODE 53G440
OD 6,35 mm
Point for screwed-in insert, available in many weights and two sizes. For the Avatar shafts we recommend the use of the 19/64" diameter.
BUSHING 5.2 FOR NOCK 4.2 CODE 53C461
OD 19/64” 60,80,90,100 grains
OD 6,03 mm
OD 6,62 mm
60-70-80-90 grains
70 grains
NOCK 5.2 CODE 53B921 Weight: 8,7 grains
3,0 grains
13
Shaft made of carbon, light and robust with an internal diameter of 6.2 mm, available in spine from 400 to 700. Shaft suitable for target and 3D. Specific internal components. In the package there are also nocks (already installed) and inserts (not inserted in the shafts). Straightness +/-0.002". CODE 53S583 SHAFT SPINE
GPI
LENGHT
DIAMETER INSIDE
DIAMETER EXTERNAL
400
6.47
33”
Ø 6.2 mm
Ø 7.19 mm
500
5.68
33”
Ø 6.2 mm
Ø 7.04 mm
600
5.11
33”
Ø 6.2 mm
Ø 7.01 mm
700
4.77
33”
Ø 6.2 mm
Ø 6.97 mm
Wings
XS WINGS VANES CODE 53E450
6.2
by sitar & sitar
The XS Wings vanes, much appreciated by many international archers, are available in 4 bright fluorescent colors and eight metallic colors. In addition, white color is also available. All the colors are available in the following sizes: 40 mm, 50 mm, 60 mm, 70 mm, or 100 mm.
COMPONENTS 6.2 POINT AND INSERT BREAK OFF
VIKING POINT
BULLET SCREW-IN POINT
CODE 531988
CODE 537704
CODE 53G440
Cutting point of a 100 grains. It provides two removable sections of 10 grains each.
Point with an aerodynamic profile Viking®, and single weight. Available in different weights from 60 to a 100 grains.
Screw-in point available in different weights and two sizes. For the Thunder and Fulmen we recommend the use of the diameter 19/64".
OD 7,20 mm
OD 19/64” 60,80,90,100 grains
OD 7,37 mm
80-90-100 grains
60,70,80,90,100 grains
Arrow with internal diameter of 6.2 mm made of a composite carbon-fiber material. Already cut it at 28", has a straightness of +/-0.006". Completed with nock, vanes, insert for point and point already screwed in. Recommended screw-in point: 5/16". CODE 53R086 ARROW WITH PLASTIC VANES CODE 53R871 ARROW WITH NATURAL FEATHERS SPINE
GPI
LENGHT
DIAMETER INSIDE
DIAMETER EXTERNAL
600
5.8
28”
Ø 6.2 mm
Ø 7.1 mm
ARROW EXTRACTORS
6.2
CODE 532049 DISC EXTRACTOR POWER DISC
CODE 53N595 GORILLA
INSERT 6.2 CODE 53P872
BUSHING 6.2 FOR 4.2 CODE 53C462
OD 7,44 mm
OD 7,22 mm
14,7 grains
NOCK PIN CODE 537428 Weight: 2,7 grains
PIN 6.2 CODE 53S605
Weight: 9,9 grains
8,7 grains
BUSHING RED CODE 53S593 Weight: 7,8 grains
NOCK 4.2 CODE 537409 Weight: 5,7 grains
NOCK 6.2 CODE 537422 Weight: 10,2 grains
NOCK 6.2 SHORT CODE 53P859 Weight: 10,5 grains
NOCK 6.2 3D CODE 53C412 Weight: 9,9 grains
15
Shaft made of carbon with a Camo finish. Robust and fast (straightness 0.003") is available in spine 400 and 500 with an internal diameter of 6.2 mm. With a really good price/quality ratio, dedicated for hunting. Available as shaft or arrow. In the pack you will find the nocks (already installed) and the insert already inserted in the 31" version and not in the other versions. CODE 53P139 SHAFT CODE 53P136 ARROW CODE 53P142 ARROW 31”
SPINE
GPI
LENGHT
DIAMETER INSIDE
DIAMETER EXTERNAL
400
7.42
32”
Ø 6.2 mm
Ø 7.39 mm
500
6.45
32”
Ø 6.2 mm
Ø 7.26 mm
6.2
CUBE TARGETS
CODE 53C985
CODE 53P289
Archery Targets offers a wide choice of cube targets for training. Between the different models you can find versions for target shooting or for hunting purposes. Make sure to check that the model you choose fits the draw weight of your bow.
COMPONENTS 6.2 BULLET SCREW-IN POINT
BULLET STEEL POINT
CODE 53G440
CODE 53C809
Screw-in point, available in different weights and two sizes. For the Gladiator and Ares shafts we recommend the use of 19/64" diameter.
Economic points made of steel with bullet profile, available in many diameters and weights.
OD 19/64” 60,80,90,100 grains
OD 9/32” 75,100,125 grains OD 21/64” 125 grains
INSERT 6.2 CODE 53P872 OD 7,44 mm 14,7 grains
Good quality carbon shaft, recommended for 3D shooting and hunting. Available both as a non-fletched shaft or as fletched arrow with plastic or natural feathers. Despite the low weight, which allows it to reach an excellent output speed, it is a very robust shaft. Available in spines from 350 to 700, with an internal diameter of 6.2 mm and with straightness of +/- 0.006 ". It can be used with traditional hunting bows, with bare bows or with a compound. The package includes shafts with or without fletching, nock, inserts (inserted or not depending on whether the shaft is cut or is in full length).
CODE CODE CODE CODE
53P149 SHAFT 53P143 ARROW 53S733 ARROW FULL LENGTH 53S614 NATURAL ARROW
SPINE
GPI
LENGHT
DIAMETER INSIDE
DIAMETER EXTERNAL Ø 7.54 mm
8.6
32”
Ø 6.2 mm
8.1
32”
Ø 6.2 mm
Ø 7.47 mm
500
7.4
32”
Ø 6.2 mm
Ø 7.32 mm
600
6.8
32”
Ø 6.2 mm
Ø 7.21 mm
700
5.9
32”
Ø 6.2 mm
Ø 7.15 mm
6.2
350 400
NOCK 6.2 CODE 537422 Weight: 10,2 grains
NOCK 6.2 3D CODE 53C412 Weight: 9,9 grains
NOCK 6.2 SHORT CODE 53P859 Weight: 10,5 grains
17
The Madera is a product born for the traditional market. Reliable and robust is the ideal choice for all those looking for a valid alternative to wooden arrows. The Madera is available as shaft with straightness +/-0.006" and as arrow in a more economic version with straightness +/-0.010". CODE 53S343 SHAFT SPINE
GPI
LENGHT
DIAMETER INSIDE
DIAMETER EXTERNAL
500
7,4
32.5”
Ø 6.2 mm
Ø 7.52mm
600
6,8
32.5”
Ø 6.2 mm
Ø 7.40mm
700
5,9
32.5”
Ø 6.2 mm
Ø 7.35mm
CODE 53S649 ARROW WITH NATURAL FEATHERS SPINE
GPI
LENGHT
DIAMETER INSIDE
DIAMETER EXTERNAL
500
7,4
32.5”
Ø 6.2 mm
Ø 7.52mm
600
6,8
32.5”
Ø 6.2 mm
Ø 7.40mm
700
5,9
32.5”
Ø 6.2 mm
Ø 7.35mm
6.2
The Madera lights, thanks to its low weight characteristic, offers great speed and is therefore particularly suitable for 3D shooting or for all those looking for a fast and performing arrow. Straightness +/- 0.003 ".
CODE 53S607 SHAFT SPINE
GPI
LENGHT
DIAMETER INSIDE
DIAMETER EXTERNAL
500
5,68
33”
Ø 6.2 mm
7.24mm
600
5,11
33”
Ø 6.2 mm
7.21mm
700
4,77
33”
Ø 6.2 mm
7.17mm
NOCK 6.2 CODE 537422
COMPONENTS 6.2 BULLET SCREW-IN POINT CODE 53G440 Screw-in point, available in different weights and two sizes. For the Madera and Madera light we recommend to use a 19/64" diameter. 19/64” 60,80,90,100 grains
INSERT 6.2 CODE 53P872 OD 7,44 mm
14,7 grains
Weight: 10,2 grains
NOCK 6.2 3D CODE 53C412 Weight: 9,9 grains
NOCK 6.2 SHORT CODE 53P859 Weight: 10,5 grains
Shaft with a larger diameter, conceived for indoor shooting. The straightness (+/-0.001") and constancy of weight, guarantee the maximum precision. Shaft sold without components, to be completed with a point and pin or bushing.
CODE 53S503 GPI
LENGHT
DIAMETER INSIDE
DIAMETER EXTERNAL
350
10,30
33”
Ø 8.0 mm
Ø 9.28 mm
8.0
SPINE
COMPONENTS 8.0 POINT 8mm BULLET
POINT 8mm PIN
PIN 8.0
BUSHING SHAFT 8.0 NOCK 4.2 CODE 53S594 Arrow ID 8,0 mm
17,4 grains
CODE 53S601
CODE 53S597
CODE 53S596
BUSHING SHAFT 8.0 NOCK 6.2 CODE 53S595
OD 9,28 mm
OD 9,28 mm
Weight: 15.6 grains
Arrow ID 8,0 mm
120,150,200 grains
120,150,200 grains
11,4 grains
19
FREEZE Bolt of quality characterized from a particular white texture that increases its visibility. CODE 53S347 20” CODE 53S510 22”
GLADIATOR Crossbow bolt robust and economic.
BOLTS
CODE 53S512 20” CODE 53S511 22”
COMPONENTS MOON NOCK FOR CROSSBOW BOLT
THREADED INSERT FOR CROSSBOW BOLT CODE 53T004
CODE 53S513
OD 8,81 mm 52 grains Threaded insert for the use of a screw-in point on a bolt. crossbow bolt.
Half moon or Moon nock, suitable for both models of Cross-X bolts and a wide range of other models. Diameter 8,8 mm. Available in color: green, red, black. Weight: 8 grains
LARP ARROW ROUNDED POINT CODE 53N340 BLUE VANES CODE 53N339 RED VANES Arrow made of fiber glass very robust with a rubber point. Available only in one size to guarantee maximum durability and safeness.
Role play games are the perfect way to have fun with bows and arrows. To be able to practice them safely, we recommend the use of a mask to protect eyes and face. LARP ARCHERY MASK CODE 53Q885
This target is used in role play games to have an immediate result feedback.
ACCESSORIES
ROLE PLAY TARGET CODE 53R558 100x100X5 CODE 53R520 80X80X5 CODE 53R559 60X60X5
21
NOCKS
NOCK PIN CODE 537428 Nock pin available in the small version as 0,088" and Large as 0,098". Available in colors: red fluo, matt orange, matt white, matt yellow, matt green, green fluo, matt black. Weight: 2,7 grains
NOCK 6.2 CODE 537422 Insert nock for internal diameter of 6,2mm suitable to many shafts and arrows. Known also as -60 or Super Uni. Available in color: fluo yellow, fluo red, fluo green, matt orange, matt white, matt black, matt yellow, matt green. Weight: 10,2 grains
NOCK PIN LONG CODE 536012 Nock Pin with elongated shape ideal for compound bows. Nock Large 0.098". Available in color: fluo red, matt yellow, matt green, matt orange. Weight: 2,7 grains
NOCK 6.2 3D CODE 53C412 Insert nock for internal diameter of 6,2mm suitable to many shafts and arrows. Known also as -60 or Super Uni. Profile particularly appreciated by 3D shooters. Available in color: matt black, matt green, matt orange, matt white, fluo green, fluo orange. Weight: 9,9 grains
NOCK 4.2 CODE 537409
NOCK 6.2 SHORT CODE 53P859
Insert nock available in size Small 0,088" and Large 0,098". Available in color: fluo yellow, fluo red, fluo green, fluo orange, matt orange, matt white, matt black, matt yellow, matt green. Weight: 5,7 grains NOCK 4.75 CODE 53F943 Insert nock for internal diameter of 4,75 mm suitable for arrows called -04 or for the Carbon Express MedallionÂŽ. Available in color: fluo green, fluo orange, fluo red, matt green, matt white, matt yellow. Weight: 6,6 grains. NOCK 5.2 CODE 53B921
ACCESSORIES
Insert nock for internal diameter of 5,2 mm. Available in color: fluo blue, fluo green, matt orange, matt yellow, matt white. Weight: 8,7 grains
NOCK 5.9 CODE 53B926 Insert nock for internal diameter of 5,9 mm suitable for arrows called -49 or also H. Available in color: fluo green, fluo orange, fluo yellow, matt yellow, matt white. Weight: 9,9 grains
Insert nock for internal diameter of 6,2mm. The shorter body gives more solidity and therefore makes it more suitable for bows with a higher draw weight. Available in color: fluo green, fluo yellow, orange fluo, matt green, matt orange, matt white, matt yellow. Weight: 10,5 grains
CROSSBOW BOLT MOON NOCK CODE 53S513 Moon nock, suitable for both models of Cross-X bolts and a wide range of other models. Diameter 8,8 mm. Available in color: green, red, black. Weight: 8 grains
PINS
PIN MEDALLION® 4.75 CODE 53P481
PIN 3.2 COMP CODE 53Q052
#1 for spine 350 - 450 #2 for spine 500 - 650 #3 for spine 700 - 800
8,4 grains 8,1 grains 7,8 grains
PIN 4.2 COMP CODE 53Q049
#1 OD 6,06 MM #2 OD 5,75 MM #3 OD 5,43 MM
8,7 grains
PIN NANO SST® CODE 53H542 12,0 grains 11,4 grains 11,4 grains
#1 OD 5,40 MM #2 OD 5,39 MM
9,3 grains 9,0 grains
PIN NANO PRO® #2 CODE 53L440
PIN 4.2 EVO CODE 53S926
#2 OD 5,60 MM #3 OD 5,40 MM
OD 5,86 MM
8,4 grains 8,4 grains
Pin can be used on the Nano Pro shaft with spine from 600 to 900 or on the Medallion XR shaft from 1300 to 2000.
OD 4,69 MM
7,5
grains PIN 4.2 BASIC CODE 53S921 10,0 grains 10,0 grains 10,0 grains 10,0 grains
COLLAR ACE® CODE 537711 Steel protective ring, protects the back part of the ACE shaft against impact with other arrows.
OD 5,21 MM
PIN 4.25 ACE® CODE 537745
OD 5,16 MM
8,1 grains
PROTECTICE COLLAR HELIOS CODE 53Q901
OD 5,61 MM
8,1 grains
#1 OD 6,0 MM #2 OD 5,7 MM #3 OD 5,5 MM
ACG® CODE 538394
PIN 6.2 CODE 53S605 Weight: 9,9 grains
PIN 8.0 CODE 53S596 Weight: 15,6 grains
5,0 grains
13,5 grains 12,0 grains 10,2 grains
PROTECTIVE STEEL COLLAR CODE 53S930
OD 5,15 MM OD 5,30 MM OD 5,45 MM OD 5,60 MM OD 5,75 MM OD 5,90 MM OD 6,05 MM OD 6,30 MM
3,92 grains 4,14 grains 4,22 grains 4,30 grains 4,50 grains 4,30 grains 4,70 grains 4,55 grains
ACCESSORIES
#1 OD 5,80 MM #2 OD 5,50 MM #3 OD 5,30 MM #4 OD 5,10 MM
PROTECTIVE COLLAR
23
BUSHING AND INSERTS
BUSHING FOR NOCK 4.2 CODE 53C459
THREADED INSERT 5.2 CODE 53S969
Arrow ID Arrow ID Arrow ID Arrow ID
OD 6,6 mm
4,7 mm 1,5 grains 5,2 mm 3,0 grains 5,9 mm 7,5 grains 6,2 mm 8,7 grans Adapter that allows you to use an insert nock 4.2 on shaft with a larger inside diameter.
7,8 grains
Arrow ID 6,2 mm OD 7,44mm
14,7 grains
Adapter that allows you to use an insert nock 4.2 on shaft with an internal diameter of 6.2. Anodized in red.
Threaded insert for the use of a screw-in point on a shaft with internal diameter of 6.2 mm.
BUSHING SHAFT 8.0 NOCK 4.2 CODE 53S594
INSERT ACE® BREAK OFF CODE 539023
Arrow ID 8,0 mm
17,4 grains
Adapter that allows you to use an insert nock 4.2 on shaft with an internal diameter of 8.0.
Arrow ID 8,0 mm
Arrow ID 4,25 mm OD 5,25mm
39-49-59 grains Threaded insert for the use of a ACE® screw-in point on a shaft with internal diameter of 4.25 mm. The presence of two stages of 10 grains each optimize the total weight of the point.
INSERT ACG® BREAK OFF CODE 539420
BUSHING SHAFT 8.0 NOCK 6.2 CODE 53S595 11,4 grains
Adapter that allows you to use an insert nock 6.2 on shaft with an internal diameter of 8.0.
BUSHING X-BUSTER® 600-700 NOCK 6.2 CODE 53F682 Adapter that allows you to use an insert nock 6.2 on a X-BUSTER® 600-700 shaft. Weight: 6,3 grains
ACCESSORIES
Threaded insert for screw-in point on a 5.2mm shaft. The slight flare of the outer part provides more protection to the shaft.
THREADED INSERT 6.2 CODE 53P872
BUSHING RD SHAFT 6.2 NOCK 4.2 CODE 53S593
Arrow ID 6,2 mm
19,5 grains
BUSHING CXL® / X-BUSTER® NOCK 6.2 CODE 537712 Adapter that allows you to use an insert nock 6.2 on a CXL®/X-BUSTER®/TANK® shaft up to 500. Weight: 9,9 grains
Arrow ID 4,25 mm OD 5,70 mm
59 grains Threaded insert to use a ACE® screw-in point on a shaft ACG® in the spine 540-480-430 with internal diameter of 4.25 mm. The presence of two stages of 10 grains each allows you to optimize the total weight of the point.
INSERT ALUMINUM ARROW CODE 53B995
Arrow Arrow Arrow Arrow Arrow
2018 2018A 2117 2216 2219
OD OD OD OD OD
7,90 mm 7,90 mm 8,33 mm 8,75 mm 8,75 mm
18,5 18,9 23,7 28,5 28,0
grains grains grains grains grains
PLASTIC VANES
NATURAL FEATHERS
PARABOLIC PLASTIC VANE 1.75"
NATURAL FEATHERS 2" SHIELD
CODE 53Q135
CODE 53S748
PARABOLIC PLASTIC VANE 2.00"
NATURAL FEATHERS 3" SHIELD
CODE 53Q143 CODE 53S757
PARABOLIC SHIELD PLASTIC VANE
NATURAL FEATHERS 4" SHIELD CODE 53Q167 PARABOLIC PLASTIC VANE 4.00" CODE 53S766
NATURAL FEATHERS 4" BARRED SHIELD
CODE 53Q151 All the plastic vane models are available in color:
BK
YL
WH
RD
BL
GR
PLASTIC VANE SHIELD 1.75" NERVE
OR CODE 53S784
PARABOLIC NATURAL FEATHERS 4" CODE 53S971 PLASTIC VANE SHIELD 2" NERVE CODE 53S775 All the natural feathers models are available in colors: black, blue, fluo green, fluo yellow, orange, red, white, yellow.
CODE 53S970
ACCESSORIES
PARABOLIC PLASTIC VANE 2" NERVE
CODE 53S972 All plastic vane NERVE models are available in color:
BK
BL
GR
WH 25
RD
OR
YL
HP
GLUE-IN POINTS
POINT 3.2 COMP HS
POINT 4.2 EVO
CODE 53R408
CODE 53E740
#1 for spine 350 - 450 #2 for spine 500 - 650
120 grains 120 grains
Points with diameter 3,2 mm suitable for every Plurima and Exentia shaft and also Easton X10 ®.
100 grains 80 grains 70 grains
Points made of steel with diameter of 4,2 mm. Suitable for Ambition arrows and similar. Available in three different weights.
POINT 3.2 COMP
POINT 4.2 BASIC
CODE 53S424
CODE 53P807
#1 for spine 350 - 450 #2 for spine 500 - 650 #3 for spine 700 - 800
100 - 120 grains 100 - 120 grains 100 - 120 grains
Point made of strong steel. Available in three range of weight, in break off version with two removable sections of 10 grains each. Suitable also on the Easton X10® shafts. VIKING POINT X10®
CODE 539457 OD 4,77 MM
The Viking profile realized in special high strength steel it's suitable for every shafts with 3,2 mm diameter like the Plurima or the Easton X10 ®. Available in weights 100, 105, 110 and 115 grains. POINT 4.2 AERO
CODE 53S588 #1 OD 5,48 mm #2 OD 5,35 mm #3 OD 5,35 mm
120 - 140 grains 100 - 120 grains 70 - 90 grains
Point made of high resistance steel for shafts with internal diameter of 4.2 mm.
ACCESSORIES
#1 OD 5,86 mm #2 OD 5,75 mm #3 OD 5,45 mm
#1 #2 #3 #4
OD OD OD OD
5,90 mm 5,65 mm 5,46 mm 5,20 mm
70 grains 70 grains 50,70 grains 50 grains
Economic point made of nickel-plated steel in diameter 4,2 mm, are suitable for entry level arrows. The external diameter of the different sizes changes to suit the different sizes of shafts. POINT 4.2 HELIOS
CODE 53P948 OD 6,3 mm
80-90-100 grains
Specific point for spine 400 and 500 of the Helios arrow. Sectionable model with two removable stages of 10 grains each.
ACE POINT ® VIKING - 00
CODE 537696 Exclusive points with tested profile and optimized in the wind tunnel. Realized with the maximum precision and grouped in a package of 6 pieces, all of the same weight, guarantee a perfect flight, a greater protection of the shaft and an easier extraction from the target. OD 5,25 mm
50, 60, 70, 80, 90, 100, 110, 120 grains
POINT 4.2 COMP.
POINT ACE® OGIVE - 00
CODE 53P873
CODE 532577
#1 OD 5,67 mm #2 OD 5,81 mm #3 OD 5,44 mm
100 - 130 grains 90 - 120 grains 70 - 100 grains
Point made of high resistance steel with diameter of 4,2 mm. Suitable for most shafts in 4.2 mm available on the market. The points have breakable stages of 10 grains each in order to obtain the desired weight.
Viking point with smoother profile that is ideal for clicker use. Point produced with the maximum accuracy and grouped in 6 pieces pack with the same identical weight. The size 00 is suitable for use with Easton ACE® and ACG® arrows. OD 5,25mm
80, 90, 100, 110 grains
POINT ACE® BREAK OFF
POINT B-ONE
CODE 537744
CODE 53B909 100-110-120, 80-90-100, 60-70-80 grains 100-110-120 grains
ARROW ID 5,9mm OD 6,21 ARROW ID 5,2mm OD 6,50
70-80,90-100 grains 80-90 grains
Points for Easton ACE® and ACG® shafts made of inox steel, with excellent tolerances of weights and sizes. Sectionable model with two removable stages of 10 grains each.
Economic point that allows you to remove only one element of 10 grains. Available in a wide range of sizes and weights.
POINT NANO SST® BREAK OFF
POINT IN/OUT BREAK OFF
CODE 53H545
CODE 53E634
#1OD 5,53 mm #2 OD 4,96 mm
100-120, 90-100 grains 100-110, 80-90 grains
Points made of inox steel for Carbon Express Nano SST®. Really good quality at a reasonable price.
ARROW ID 5,2mm ARROW ID -49mm ARROW ID 6,2mm VAP 500/700 VAP 600/800
Points made of steel that provide as well the cover of the shaft in the last millimeter in order to protect it better.
POINT MEDALLION®
POINT 6.2 VIKING
CODE 539418
CODE 537704
- 04 OD 5,83 mm 90-100-110, 60-70-80 grains -XR 1300-2000 OD 4,75 mm 50-60 grains
OD 7,26mm
High quality stainless steel points.
60,70,80,90,100,110 grains
Point with profile tested and optimized in the wind tunnel measuring 6.2 mm (also defined -60). It has the same precision features as the Viking model for ACE® and is also sold in a pack of 6 pieces, grouped by weight.
BREAK OFF 6.2
POINT 5.2 BREAK OFF CODE 53I670 OD 6,62 mm
70-80-90-100 grains 80-90-100 grains 80-90-100 grains 60-70-80-90 grains 60-70-80-90 grains
60-70-80-90 grains
CODE 531988 OD 7,37mm
80-90-100 grains
Point with particular profile suitable for shooting on 3D targets. The three breakable sections allows you to vary the weight of the point from 60 to 90 grains.
Breakable point for shaft with internal diameter of 6,2 mm.
POINT 5.2 ONE PIECE
POINT VIKING CXL®/X BUSTER®/TANK®
CODE 537686
CODE 53H766 OD 6,35
70 grains
Point with a bullet profile for target shooting.
OD 8,81mm 100, 120, 140, 160 grains
Viking point that can be used on the 0.318" internal diameter (about 8.08 mm) of the Carbon Express CXL 1®/ X Buster®and Tank®. The Viking point comply with the WA standards about the maximum diameter allowed, they are particularly suitable to protect the shaft and facilitate the extraction from straw targets. 27
ACCESSORIES
ACE OD 5,70 mm ACG OD 5,74 mm
GLUE-IN POINTS POINTS CXL®/XBUSTER®/TANK®
POINT 8mm BULLET
CODE 53C268 OD 9,28 mm
120,140,160,180 grains
CODE 53S601
Economic points for Carbon Express shafts with internal diameter of 0,318" (about 8,08 mm) like the CXL® /X Buster®and Tank®.
Points in steel for shafts with internal diameter of 8 mm. Classic bullet shape.
STEEL POINT FOR ALUMINIUM SHAFT
POINT 8mm PIN
CODE 539013 Arrow 1214 OD Arrow 1413 OD Arrow 1416 OD Arrow 1516 OD Arrow 1616 OD Arrow 1716 OD Arrow 1816 OD Arrow 1916 OD
5,19 mm 5,60 mm 5,71 mm 6,15 mm 6,52 mm 6,80 mm 7,30 mm 7,40 mm
46,8 grains 36,3 grains 50,7 grains 54,3 grains 63,3 grains 66,9 grains 74,1 grains 82,2 grains
OD 9,28 mm
120,150,200 grains
CODE 53S597 OD 9,28 mm
120,150,200 grains
Points made of steel for shafts with internal diameter of 8 mm. Conical shape.
SCREW-IN POINT 3D POINT FOR WOOD SHAFTS
CODE 53N750 516” 1132”
60,80,100 grains 80,100,125 grains
A point for wooden arrows in nickel-plated steel, parallel and threaded. Available for 5/16 "and 11/32" diameters in a good assortment of weights.
CODE 537743 Weight: 31,36,41,46,51 grains
Points for the Easton ACE® insert system, perfectly compatible with the originals, they are made in stainless steel with the maximum accuracy of weight.
BULLET POINT IN STEEL
FIELD POINT IN STEEL
CODE 53C809
CODE 53C800
9/32” 11/32” 21/64”
75,100,125 grains 100,125 grains 125 grains
Economic points made of iron with bullet profile, available in many diameters and weights.
BULLET SCREW-IN POINT
ACCESSORIES
ACE® THREADED POINT
CODE 53G440 9/32” 19/64”
60,80,100 grains 60,80,90,100 grains
Screw-in point with standard thread available with diameters of 9/32 "(7.15mm) or 19/64" (7.54mm) and usable on a multitude of shaft present on the market. The presence of a rubber O-ring prevents unscrewing due to vibrations. Available in a wide range of weights.
5/16” 9/32” 11/32” 21/64”
75,100,125 grains 75,100,125 grains 100,125 grains 125 grains
Economic point made of steel with Field profile, available in many different diameters and weights. CROSS-X SCREWED-IN PIN POINT CODE 53T060 9/32” 19/64”
70 grains 60,70,80,100 grains
Stainless steel screw-in point with a particularly aggressive Pin Point shape. Ideal for 3D archery Available in 19/64” and 9/32” in different weights.
NOTE:CXL®, X-BUSTER®, TANK®, NANO®, NANO SST®, MEDALLION XR® are tradeNOTE: X10®, ACE® and ACG® are trademarks registered by Easton® Archery.
marks registered by CARBON EXPRESS®.
SPECIAL POINTS HUNTING BROADHEAD ADAPTER
BLUNT POINT CODE 536043
CODE 53C017 SHORT CODE 53C016 LONG
5/16” 11/32”
Adapters that allows you to use hunting blades like Zwickey® on normal threated inserts. Available in Short and Long version. Weight: 74,7 grains short/ 100,5 grains long
Blunt points made of rubber to be inserted over the arrows. Available in two different diameters 5/16" (7,94mm) and 11/32" (8,73mm).
FISHING POINT
LARP POINT
CODE 53R074
CODE 53Q873 GREEN CODE 53P578 ORANGE
Arrow OD 8,17mm 310 grains Sold in a pack of two pieces.
44 grains 88 grains 1
Rubber point for role-play games or simply to allow safe shooting. Supplied with threaded insert that can be used on many arrows available on the market. Available in two different colors.
WHISTLING POINT
CODE 53P636 Weight: 126,6 grains
Screw-in point that applied to the shaft emits a whistle during the flight.
FLETCHER
GLUE
CODE 53S998 HOT MELT GLUE FOR POINTS CODE 537242 long CODE 53B736 short
ADHESIVE FOR VANES AND FEATHERS CODE 534328
ACCESSORIES
Simple and practical fletcher that allows you to fletch any diameter shafts with three, four or six vanes.
29
ARROW NUMBERING DECALS CODE 53P094 Practical transferable numbers applicable on any arrow to identify the number of the same. Available in various colors.
ARROW NUMBERING TAPE CODE 53S155 Available in four different colors and usable as a normal ribbon to fix the vanes with the advantage of being able to number your arrows.
TAPE HOLDING WINGS CODE 53P098 The pack contains 48 fixing strips for vanes like Spin WingÂŽ or similar in the declared size (3 or 5 cm long and 5 mm high). The ribbon has an excellent seal and bright colors or with the colors of the national flags to best customize your arrows.
WRAPS
ACCESSORIES
CODE 53P360 Wrap for carbon, aluminum or wood shafts, in bright colors. They increase the visibility of the arrow on the target and add a touch of personality to the shaft. Simple to apply and with an excellent seal, they offer a better base for gluing plastic vanes or for applying double sided adhesive vanes. Furthermore, the removal of the vanes is much simpler and cleaner and there is no risk of damaging the shaft.
ARROW CARRYING CASE CODE 53S429
T-SHIRT CODE 661906
ARM SLEEVES CODE 53T003
ACCESSORIES
CAP CODE 53T002
31
The products, represented in this catalog, are subject to continuous updating, the characteristics and specifications of the same can therefore change at any time without notice. All images and texts in this catalog are property of Bignami S.p.A. and are protected by applicable copyright laws. Any use, even partial and in any form, must be previously authorized in writing by Bignami S.p.A. Š November 2018 Bignami S.p.A