128
UNIVERSAL CABLES, BULK CASING, FITTINGS & ADJUSTERS
UNIVERSAL CABLE ASSEMBLIES/INNER REPLACEMENT CABLES UNIVERSAL CABLE ASSEMBLIES Universal Throttle Cable Assembly For use with Mikuni carbs to 38mm. Can also be used with other carbs. Housing length - 42”, exposed wire - 41⁄2”. Use with standard or quick action throttles 42” casing 101-80-30001 50” casing 101-80-30001-08 Universal Throttle Cable Assembly Will fit most machines. Comes complete with twist-grip fitting, midway adjuster. Bottom (carb) end is bare with solder-on slide lift fitting and casing ferrule furnished. 45” casing 101-80-30002 53” casing 101-80-30002-08 Universal Clutch and Brake Cable Will fit most British and European machines. Comes with 3⁄8” lever fitting. Bottom end is bare with solder fitting and casing ferrule furnished. Trim to fit your needs. 51””casing 101-80-10001 59” casing 101-80-10001-08
INNER REPLACEMENT CABLES Throttle Cable
For Amal throttle, old style, 60” long. Fits 101-80-31001 most British, European machines. Sold ea. Throttle Cable For Amal throttle No. 366/2. Made with 3/16” spherical ball for better cable alignment. 101-80-31002 60” long. Sold ea. Throttle Cable
Universal Clutch and Brake Cable Will fit most Japanese machines using 5/16” lever fitting. Bottom end is bare with solder-on fitting and casing ferrule. Trim to fit your needs. 48” casing 101-80-10002 56” casing 101-80-10002-08
As used on Japanese machines. General usage. 60” long. 6mm diameter fitting. 101-80-31003 Sold ea.
Universal Brake Cable Will fit most British and European machines. Comes with 3/8” lever fitting. Bottom end is bare with our No. 111-80-34372 cable clamp furnished. Trim to fit your needs. 48” casing 101-80-10003 56” casing 101-80-10003-08
Throttle Cable-Moped
THROTTLE CABLE, STRAIGHT-PULL Universal Throttle Cables Fits in-line throttle to popular Mikuni, Keihin, Bing, and Del ‘Orto carburetors. 42” housing. Magura 312/314 101-80-30006 Gunnar Gasser 101-80-30007 NYLON THROTTLE CABLES These nylon cables come complete with all necessary fittings, ferrules and adjusters. No soldering or crimping required. All you need is a sharp knife or razor! Trim housing for correct exposed wire. Universal Nylon Throttle Cable
Inner cable with .187 cable end. 51” long. 101-80-31004 Fits the majority of mopeds. Sold ea.
Throttle Cable-Scooter
Fits Vespa and general usage, 70” long. 101-80-31005 (Vespa No. 139630) . Sold ea. Gear Shift Cable - Vespa 75” long. Sold ea. 101-80-31006
48” long 101-80-30003 Nylon Throttle Cable Assembly These are the same as our No. 101-80-30003 except they have a midway adjuster installed to assist in fine tuning. 48” long 101-80-30004 Push-pull Cable Set The following is a cable set of TWO cables (one pull, one push) that will adapt our #121-80-30712 Push-Pull Throttles to popular aftermarket carburetor kits. The cables are nylon-lined with 10mm elbows and 6mm carb linkage adjusters. Cable housing is approximately 32” long. Will fit most standard set ups using clip-ons or Super Bike type bars. These cables will not fit a stock push-pull throttle, only our #121-80-30712. (Throttle not included). Push-Pull Throttle Cable Set. Fits Mikuni smooth bore, Keihin, Mallossi, 101-80-30005 and Del ’Orto carburetor
Clutch/Brake Cable - Scooter Fits Vespa and general usage, 98” long. 101-80-31007 (Vespa No. 118313) Sold ea.
Clutch and Brake Cable
Universal - 3/8” diameter lever fitting, as 101-80-11001 used on British machines (61” long) 5/16” diameter fitting at lever handle, used 101-80-11002 on Honda, Yamaha and other machines.
