Promotion
19
#
September 17 - October 9, 2011 12, 16, 20, 58
1/2" QUIET AIR IMPACT WRENCH DRIVE
Quiet 1/2" impact tool at 86 dBA Extreme power 1,100 ft-lbs of breakaway torque Quiet 1/2" impact tool at 86 dBA Max torque in reverse: 780 ft-lbs Max breakaway torque in reverse: 1,100 ft-lbs
Increased trigger control
Improved range on power regulator settings
Backed by Matco Tools 2 year warranty
$407.95 Save nearly $60
WA
T RRAN
Y
T
MT1769QA Y E AR WO
SPECIAL OFFER p. 7
For a limited time only,
Matco 6s Series toolboxes
10
% Off
Smokin‘ Hot Deal save
$125
$1,070.00
KI95-0014A MATCO DIAGNOSTIC LEAK DETECTOR •• Full featured diagnostic capabilities •• No Need For Nitrogen or UV Dye •• Works with shop air, 12 volt battery and uses mineral oil •• Simple to use 1 button 1 knob •• Complete accessory kit with plastic carrying case •• Includes compound gauge to test cars with natural vacuum as well as pressure decay leak down test
$45.95 Save 10%
FTLD8 8 PIECE FUEL & TRANSMISSION LINE DISCONNECT SET •• Fits any 5/16" or 3/8" fuel line found on GM, Ford or Chrysler cars •• Kit Includes: •• 5/16", 3/8", 1/4" disconnect tool •• 5/16" to 3/8" Ford AC and Fuel line spring lock coupling tool •• 1990 + Ford Rangers and Explorers with 4.0L, 6 cylinder engines •• 1986 + Ford Vehicles with AXOD pr ATX automatic transmissions •• Ford CFI fuel lines with hair pin connectors
$161.95 Save over $15 $129.95 Save over $30
CT110K MASTER COMPRESSION TESTER KIT •• Designed for complete compression testing on gasoline engines, including domestic, imports, motorcycles, marine, and small engines •• Gauge reads 0-300 PSI, 0-2000 kPa •• Kit contains four 12" flex hoses in 10mm, 12mm, 14mm and 14mm deep sizes, deep well and Ford Triton adapters •• High quality gauge with rubber boot and pressure relief valve fitted with a flex hose and quick coupler
MST9140B UNIVERSAL VALVE SPRING COMPRESSOR •• Access to valve springs in confined spaces with engine in vehicle •• Complete universal kit with multi adjustable points •• Valve springs can be depressed "remotely"; depressor bar and compression tube are separate •• All components store neatly in a blow molded box
$106.00 Save over $25
CT60K COMPRESSION TESTING SET
www.matcotools.com
pr
2
•• Complete set compression testing on gasoline engines, including domestic, imports, motorcycles, marine, and small engines •• Extra long 25" flex hose with quick coupler, 2-1/2"gauge with chrome bezel and rugged protective outer boot •• Dual scale gauge reads 0-300PSI and 0-21 kg/cm2 •• Adapters included: 12" flex-14mm standard and long reach, 18mm, 10mm, and 12mm threads
$91.95 Save over $10
MFPKA FREEZE PLUG TOOL KIT •• Special-machined head adapters fit most freeze plugs: 3/4", 1", 1-1/4", 1-1/2", and 1-3/4" •• High-carbon steel, fully-plated •• Two formed shafts: 8" and 18" (angled) long with knurled ring nut
$75.99 Save over 10%
SPK5 5 PIECE SPARK PLUG SOCKET SET •• Set includes: •• 4" x 5/8" Swivel Spark Plug Socket •• 6" x 5/8" Swivel Spark Plug Socket •• 11" x 5/8" Swivel Spark Plug Socket •• 6" x 13/16" Swivel Spark Plug Socket •• 2.5" x 9/16" Magnetic Spark Plug Socket
$39.95 Save 10%
MD118B LOGIC PROBE, HEAVY DUTY •• Allows testing range of 3-26 volts. Bright red and green LEDs interpret voltage signals such as ground, power and frequency. •• Tests fuel injectors, solenoids, presence of serial data, and tach reference signals. •• Output tests on MAF, Cam, Crank, Hall Effect VRS sensors and more. •• High impedance input compatible with computer circuits and sensors. •• Air bag safe.
Allows for extra reach, removal and locking of
clamps into open position $76.49 Save over 15%
HCPR20A RATCHETING HOSE CLAMP PLIERS •• Extra heavy duty ratcheting hose clamp plier allows for extra reach, removal and locking of clamps into open position •• Allows for removal of plastic and/or metal self-tightening hose clamps with diameters of 11/16"-2-1/2" (18mm-54mm) •• Versatile pliers include a heavy duty cable, tension adjuster and a 360° swivel cable assembly •• Extra heavy duty precision clamp on end of flexible cable allows for extended reach where other models cannot •• Pliers can be locked, freeing up your hands and making your job easier and faster
QUICK AND EASY!
Remove stubborn rusted and rounded off nuts and bolts
$45.95 Save $4
HDWSETA 2 PIECE WORK SHEAR SET •• Multi purpose shear kit with angle and straight blades •• Perfect for cutting plastic, rubber, heavy fabric, rope, wire, cardboard etc •• Light weight, spring loaded and easy to use •• Includes safety lock & wire cutting notch •• Non slip 2 component handle
$154.99 Save over $15
MBX13 13 PIECE 3/8" BOLT EXTRACTOR SET
pr
•• Ideal for removing rusted and rounded off nuts and bolts •• Left hand spiral flutes will tightly grip the damaged fasteners (metric or standard) for quick and easy removal •• Hexagonal flats for use with flat wrench
FYI: Honda is recalling certain model year 2012 civic 2-door and 4-door vehicles manufactured from April 21, 2011, through May 2, 2011. There is a possibility that an o-ring, which seals a connection in the fuel feed line, is misaligned. If the o-ring is misaligned, a small fuel leak may occur. 3
TOP TORQUE II SCREWDRIVERS
$52.95 Save over $10
SML3KIT 3 PIECE LOCKING PLIERS SET •• Matco locking pliers provide superior gripping strength for the toughest jobs. •• This set includes 3 of the most popular sizes to get most standard jobs done. •• Include 10" straight jaw pliers, 10" curved jaw pliers and 5" curved jaw pliers.
$33.95 Save 10%
SDET6C 6 PIECE MINI TORX SCREWDRIVER SET •• Includes a rotating handle feature ideal for detailed electronics work •• Torx fasteners are common for both radios and cell phones •• Set includes the following torx sizes: T5, T6, T7, T8, T9, T10
$17.49 Save over 15%
RTO1MB RADIATOR HOSE TOOL ORANGE HANDLE $162.80 each set
8 PIECE TOP TORQUE II SCREWDRIVER SET •• Screwdrivers have different handle sizes based on the screwdriver length which properly matches handle size with screwdriver application •• Handle is molded around blade via butterfly shank for greater strength and durability •• Greater proportion of soft material on handle surface provides a better feel and improves comfort in thumb placement area •• Innovative bolster hole for extra turning power •• High alloy chrome steel blades are etched with screwdriver specifications for ease of use •• Includes length sizes: (Slotted tips) 7", 8", 11", 13", (Phillips tips) 7-1/2", 8-1/2", 11-1/2", 11" •• SSPCR8C Red •• SSPCO8C Orange •• SSPCG8C Green
•• Matco's Exclusive Ergonomic Handle •• Removes radiator hose from clamps and fittings •• Pulls cotter pins $101.99 Save over 10%
SPD4KA 4 PIECE DRIFT PUNCH SET •• A full selection of four drift punches •• Manufactured from high-grade, shock resistant tool steel and heattreated for the right balance of hardness, strength and durability •• Set includes: 8" Drift Punch - 3/8" x 5/32", 10" Drift Punch - 1/2" x 3/16", 12" Drift Punch 5/8" x 1/4", & 12" Drift Punch - 5/8" x 5/16"
$146.95 Save over $25
MST4306 6 PIECE CAMLOCK™ RETAINING RING PLIER SET
Patented flocking surface for a non-slip grip.
•• Unique and patented CamLock ™ action allows pliers to be quickly and easily switched for both Internal and External retaining ring applications •• Comes in three hardened, precision-ground tip sizes: 0.038", 0.047", and 0.070" •• 15° and 90° tip angles for stable retention of rings •• Return spring to speed the work •• 6" and 7" nominal lengths
$81.95 Save over $15
STAB2T 2 PIECE T-HANDLE SPINNER SET
www.matcotools.com
pr
4
•• 1/4" and 3/8" T-Handle design allows for maximum torque and constant pressure •• Adjustable grip allows the shank to spin freely for quick tightening or loosening fasteners •• Much faster than typical speed wrenches •• 13" Overall length
More breadth. More features.
More performance. That’s the Matco Advantage.
Precision manufacturing processes
Ultimate in strength and durability BENEFITS
FEATURES
High performance alloy steel with advanced heat treating process, precision quench and temper
Measures inside, outside, depth and step $40.95 Save $10
DC601A 0-6"/ 0-150MM ELECTRONIC DIGITAL CALIPER •• Inch/Metric conversion with one button •• Large, easy-to-read display •• Measures inside, outside, depth and step •• Full Stainless Steel Frame •• Resolution: 0.0005 IN / 0.01mm •• Includes Blow molded case •• Battery type - SR44 watch battery
Dependable and consistent performance
Opti-Torque System
Applies torque to the fastener sides reducing corner round-off
High visibility laser and impression stamped markings
Easy identification and accessibility
$265.50 Save nearly $30
DDG165 DIGITAL BRAKE DRUM GAUGE •• Measures 3 in to 16.5 in (76mm to 420mm) •• Preset Depth of 1.5 in with markings for 0.5 in and 1in •• English / Metric Conversion •• Zero Setting at any position •• Resolution 0.0005 in (0.01 mm)
$87.95 Save over 10%
OTC4592 TRUCK BRAKE SPRING PLIERS •• Long heavy duty forged handles provide leverage to remove and install brake return springs on medium and heavy duty drum brakes
12 Point Metric $29.49 Save over 10%
$40.95 Save nearly 10%
SBPM132V 3/8" DRIVE 13 PIECE METRIC 12 POINT IMPACT SOCKET SET
pr
E
TC
O
SI E V
MA
•• 150° chamfer on the socket drive end for better grab, constant pressure and easier use •• Sizes include: 7mm - 19mm
XC LU
NEW www.matcotools.com/torque
SFF2A SPILL FREE FUNNEL WITH GM ADAPTER •• Saves time and eliminated spills and mess •• Includes threaded cap and adapter for newer GM "threaded style" radiator openings •• Eliminates trapped air pockets which usually cause erratic cooling system and heater performance •• Controls the proper amount of coolant entering the system and enables unattended filling of the coolant system •• Four adapters fit most domestic and import cars and light trucks •• Angled neck allows use on radiator caps that are placed at an angle
5
E D A M I
. N E P P A H E G CHAN
E G N A H C E K A M YOU CAN
. O O T N E P P HA
NCHISE O WNER MATCO FRA 128/29/03 ce0/0 ncresi9n/1
r si uto uto trib Dis - ib -D chistr koDdeeur ts icukcY Rh C
Call Matco direct today! 888.696.2826
F MATCO. H THE HELP O IT W S ES N SI O INTO BU F MY STORY AT I CHOSE TO G E THE REST O
/chuck M O .C O C T A M GO
D SE LEARN HOW AN
ORGANIZE
$336.95 Save over $75
$35.90 Each, save over 10%
SMCL122T 12 PIECE SAE 12 POINT LONG COMBINATION WRENCH SET
14 PIECE WRENCH ORGANIZER •• Magnetic organizer holds 14 metric wrenches •• Magnets hold the wrenches in and attach the organizer to metal surfaces •• MAGWRNCHM-( Blue) holds 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm •• MAGWRNCHS -(Red) holds 1/4", 5/16", 11/12", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"
•• Opti-Torque Pro™ open end allows 25% more torque on the fastener reducing tip spread by 50%. Mirror finish •• Includes sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16"
LOCK-A-SOCKET RAIL •• Fits any socket, socket set, or accessory on the market as long as it has a 1/4", 3/8", or 1/2" drive end •• Turn the Lock-A-Socket 1/4 of a turn to the right until it clicks to lock your tools in one place or turn it to the left until it clicks to use it as a peg system •• Magnetic strip on the back that will allow you to securely attach it to toolboxes, drawers, service carts, etc
6
1/4" drive
$21.95
MLAS38
3/8" drive
$21.95
MLAS50
1/2" drive
$29.95
$479.50 Save over $30
MTJF1000 1/2 TON FLOOR STYLE Transmission JACK
S
www.matcotools.com
•• Jack adjusts to different vehicles, transmissions, and environments so you don't have to •• Adjustable head can be tilted forward, backward and side to side for optimum alignment of transmission bolt pattern and pins •• Load restraining chain enables safe raising and lowering of the load •• User friendly 360° rotating pumping socket allows proper positioning of the Jack and the handle for productivity and safety
pr
W RENC HE
MLAS25
Invest in the best with a
toolbox.
Your toolbox says a lot about you. Make a statement. For a limited time only, enjoy 10% off 6s toolboxes.
10
For a limited time only,
% Off
Matco 6s Series toolboxes
pr
Tools not included. Some restrictions may apply. See your participating Matco Tools Distributor for more information on the best built toolbox for 10% off.
7
$157.50 Save over $15
SE730K
MINI POLISHING KIT •• Polisher features rubber molded grip for comfort •• Two finger throttle for easier control and less fatigue •• Adjustable speed regulator to match speed to job •• Handle exhaust directs exhaust away from work area. •• Small and lightweight for ease of use in tight areas •• Kit includes: mini polisher, 3" Velcro sanding pad, 3-1/2" buffing bonnet, 3" white compounding foam pad, and 3" yellow compounding foam pad
One of the most powerful "mini" right-angle die grinders on the market at .33 horsepower.
Features anti‑vibration spring dampening system for maximum user comfort
$229.50 Save over $30
MT1811 SHORT BARREL AIR HAMMER •• Integrated quick chuck on barrel •• Variable speed trigger for control •• Metal valve assembly for increased durability •• Lighter fluted barrel for easier use •• Spring vibration dampening system for comfortable use over extended periods of time •• Center handle design for superior balance
$152.95 Save nearly $20
•• One of the most powerful "mini" right angle die grinder on the market at .33 horsepower •• Built in regulator for greater speed control •• Convenient plastic tray easily stores into toolbox and service cart drawers
8
www.matcotools.com
$196.95 Save nearly $35
SE1315 AIR SAW WITH SWIVEL INLET •• Cuts pipe, mild steel, aluminum, plastic & sheet metal up to 16 gauge •• Not recommended for fiberglass •• Includes: MT14 air swivel and 3 bi-metal blades (18 tpi, 24 tpi, 32 tpi) pr
SE355K MINI RIGHT ANGLE DIE GRINDER KIT
POWER & CONVENIENCE Features compact, lightweight composite material $234.95 Save over $25
Save over $30 $165.49
DB29TM 29 PIECE REDUCED SHANK TURBOMAX DRILL BIT SET •• TurboMax tip stays sharp longer and drills up to 28% faster •• Three-flatted shanks reduces slippage common with keyless chucks •• Contains 1/16" through 1/2" by 64ths with 3/8" reduced shank
MUC108RKIT 10.8V 1/4" DRIVE RATCHET KIT
300 RPM's 35 ft.lb max torque
300 RPM's 70 ft.lb max torque
$153.50 Save $20
$247.95 Save over $25
MT1820A 1/4" AIR RATCHET
MT1849A 3/8" AIR RATCHET
•• 35 ft.lb. maximum torque and 300 rpm free speed •• Unique head construction provides improved durability •• Low-profile forward/reverse control has a wide diameter for easy gripping and also eliminates accidentally changing directions in confined spaces •• Ergonomic coupling nut and handle ensure a comfortable grip
•• Exceptional performance with 70 ft-lbs of maximum torque at 300 RPM free speed •• Exclusive, ergonomically designed handle for greater comfort and ease of use •• Twin Pawl Plus head design for exceptional durability and performance •• 360° adjustable exhaust directs air away from the operator and work •• Patented grease fitting in yoke for proper maintenance •• 1 year warranty
$239.95 Save over $30
MT2889 3/8" DRIVE REVERSIBLE KEYLESS COMPOSITE AIR DRILL •• Features lightweight composite material •• Premium Jacob's keyless chuck •• Variable speed trigger for greater control
$165.95 $183.95 Save over $20
pr
MT2871RK 3" HEAVY DUTY REVERSING CUT OFF TOOL KIT •• 0.8 HP motor for increased power •• Unique adjustable locking guard allows for end user to rotate to 16 positions •• Reversing collar allows end user to quickly switch from forward to reverse and direct sparks away from work •• Safety lever throttle •• Includes: MT2871R - reversible cut off tool, (10) 3" abrasive cut off wheels, safety glasses, and blow mold storage case
MT2844 3/8" PALM AIR RATCHET
E
TC
O
SI E V
•• (1) MUC108R 10.8V ratchet •• (1) MUC108LB 10.8V lithium battery •• (1) MUC108LC 10.8V quick charger •• (1)10.8V Infinium cordless carry bag
•• Patented Matco ratchet head with built-in grease fitting •• Compact, lightweight, take-anywhere design •• Small head design (1" wide) for superior access in tight areas •• Powered by 1.5Ah 10.8v lithium ion battery.
MA
Kit contents
XC LU
•• New composite housing design for improved look and comfort •• Throttle lever with tapered valve provides speed control •• Built in regulator to control power •• Tumbled cylinder and motor system provide additional speed and power •• Optional head boot available P/N MT2834PC •• Matco patented head design with built in grease fitting for extended life •• Working torque 5-25 ft. lbs, maximum torque 30 ft. lbs
9
$11.54
PDNV21 MATCO TOOLS PENNANT STRING •• Mark your space with these great Matco Tools pennant strings •• Each string is 40' long with a Matco Tools design printed on each of the red and white pennant flags
$43.95
PDNV49 ZIPPO & BICYCLE CARD GIFT SET •• Two great products together in one place •• Bicycle playing cards and Zippo lighter sold as a package •• Great quality and name recognition will get everyone's attention
$18.99 $89.99
$49.95
MM69GTO 1/18 DIE CAST 69 GTO
16STUDPANEL 1916 STUDEBAKER PANEL TRUCK
•• Funny car from the 60's •• Detailed engine and chassis with plastic body that opens up
•• 1/25 scale die cast collectable with exclusive Matco colors
PDYT9 RATTLE BABY BIB •• Over the head bib is perfect for the little one that loves their Matco Tools •• Rattle design will look great on both boys and girls •• Same great bib. New design for 2011 $59.95
PDNV36 SAMSONITE 22" DUFFEL BAG
Order your officially licensed
Harley-Davidson®
products today!
•• This 22" Samsonite duffel bag is designed with large packing capacity. Has sporty zipper pulls and a front organization pocket •• Carry handles and shoulder strap plus PVC Wetpak protects contents! Constructed of 600 denier polyester •• Great for any trip!
$59.95
PDNV48 HARLEY-DAVIDSON ENTRY MAT •• Everyone will know your favorite motorcycle is a Harley-Davidson from the minute they walk up to your door •• This Harley-Davidson nostalgic entry mat has the famous Bar & Shield logo die cut •• Built with quality to stand up to all weather conditions $29.95
•• Classic reproduction thermometer combines the retro styling of H-D pre Luxe motorcycle oil graphics with the practical function of a thermometer •• Durable metal design and great for indoor or outdoor use!
10
www.matcotools.com
$59.95
PDNV42 Harley-Davidson MOTORCYCLE FLASK GIFT SET •• Live it up with this attractive Harley-Davidson flask gift set! •• Rugged stainless steel flask with genuine leather wrap shot glass set and easy fill funnel •• Makes a great gift for your favorite Harley enthusiast!
pr
PDNV44 Harley-Davidson OIL CAN THERMOMETER
$49.99
11RATFINK2 RAT FINK DIE CAST CAR #2 •• The Popular Rat Fink is back for another ride! •• Custom Matco die cast with the popular Rat Fink character •• 1/24th scale
Limited ntiti es ua Q
LONG SLEEVE POCKET POLO •• This knit long sleeve golf shirt with left chest pocket is a comfortable versatile polo that features doublestitched seams for added strength and great durability •• Matco Tools logo embroidered on left chest
Limited Quantities $28.99
PDMP21M
M
$78.95
PDMP21L
L
$78.95
PDMP21XL
XL
$78.95
PDMP21XXL
XXL
$82.95
PDMP21XXXL
XXXL
$82.95
PDMC65 CAMO WAXED CAP •• This great hat has Mossy Oak camouflage brim •• A light wax coating seals out the elements keeping your head dry and warm •• The camo brim adds interesting contrast •• Matco Tools logo is embroidered on the front
MILITIA Long Sleeve THERMAL •• Heat up your look with this comfortable thermal offers lightweight warmth with a soft stretch •• Long sleeve 60/40 cotton/poly mini waffle blend
PDMT83M
$23.95
PDMC69 BLUE WITH RED WAVE CAP
pr
•• The blue red wave cap is a brushed cotton twill with a velcro closure. Matco Logo embroidered on front, with hex on back •• Classic Matco look and very stylish! •• Get yours today!
M
$41.95
PDMT83L
L
$41.95
PDMT83XL
XL
$41.95
PDMT83XXL
XXL
$45.95
PDMT83XXXL
XXXL
$45.95
GLACIER MOUNTAIN JACKET •• New look and feel! New jacket ... same great value! •• This jacket is perfect for everyone! •• Black lined jacket with poly fill for warmth and comfort. Left chest and full back embroidery •• Available: small - 3XL. Get yours today!
PDMJKT34S
S
$89.95
PDMJKT34M
M
$89.95
PDMJKT34L
L
$89.95
PDMJKT34XL
XL
$89.95
PDMJKT34XXL
XXL
$94.95
PDMJKT34XXXL
XXXL
$94.95
11
BASICS
Get the Technician’s Essentials. Whether you’re just starting out, or you’re a seasoned expert... These basics are essential to your set. Get back to basics!
Superior accessibility with
8"
zero° offset and the length you need for hard to reach areas
16" $71.49 Save over 10%
zero° offset
IDPBSET2 2 PIECE INDEXING PRY BAR SET •• Durable Patented locking flex head improves access and leverage over other fixed head pry bars •• Indexible to 180° •• Includes sizes: 8", 16"
$118.95 Save 10%
BFR128LFT 3/8" 12" 88TH LOCKING FLEX RATCHET
12 Point Metric $203.95 Save over $45
SRBZXL62T 6 PIECE METRIC 12 POINT EXTRA LONG ZERO DEGREE OFFSET WRENCH SET •• These wrenches feature an extra long beam length and a zero° offset standard box end in a double box format •• Includes sizes: 8mm x 10mm, 11mm x 12mm, 13mm x 14mm, 15mm x 16mm, 17mm x 18mm, 19mm x 20mm
Find US ON FACEBOOK PR1911RED
facebook.com/matcotools
•• 88 ratchet gear teeth produce a swing arc just over 4° allowing faster work in the most compact spaces •• Features unique 9-position locking flex-head. Locking lever ensures ratchet head maintains desired position regardless of size or applied load with the head rotating through a full 180 degrees •• Ultra low profile head permits access to the tightest jobs •• Streamlined TearDrop Ratchet Head and long handle pattern for improved access in the most compact areas •• Recessed shift lever to prevent accidental shifting to improve job efficiency •• "Swollen" contour handle ergonomically designed for a firm, non-slip grip with optimum conformability •• C-Ring retainer to permit fast access to the ratchet mechanism for easier maintenance
12"
The products on Matco’s National Promo are limited in quantity and subject to availability. Matco reserves the right to correct printing errors.