P
R
E
L
I
M
I
N
A
RF Keypads
HomeWorks®
R
Y Tabletop Keypads 048-220a 1 07.18.08
HomeWorks RF Tabletop Keypads with seeTouch® Style Buttons HomeWorks RF Tabletop Keypads with seeTouch style buttons provide homeowners with a simple and elegant way to control lights, shades, motorized screens, and many other devices. The RF Tabletop Keypads communicate with the system through radio frequency (RF) and have indicator LEDs that provide real-time status.
LEDs Backlit Buttons
All On All Off
Custom engraved, large backlit buttons are easy to read and provide easy location of the Tabletop Keypad in a dark room. The RF Tabletop Keypads with seeTouch style buttons are available in 5-, 10-, or 15-button versions with Raise / Lower.
HRT-15S2RL-SW
Raise/ Lower Buttons
Features • Large backlit buttons are easy to locate and press. • Indicator LEDs provide real-time status. • Choice of two power sources: Plug-in DC adapter; Cordless, using AAA batteries. • Configurable backlight intensity for both battery and adapter power sources. • Configurable cordless operation: – Single button press to “wake up” and activate selected button – Single button press to “wake up” and show status of lighting • One engraved button kit certificate included.
HRT-10S2RL-SW
HRT-5S2RL-SW
Model Numbers
Large Button Tabletop RF Keypads HRT-5S2RL-XX 5 Buttons, Raise/Lower, and All On/All Off HRT-10S2RL-XX 10 Buttons, Raise/Lower, and All On/All Off HRT-15S2RL-XX 15 Buttons, Raise/Lower, and All On/All Off
Prepaid Engraving Certificate DO NOT DISCARD
Redeemable for one engraved button kit
Engraved Faceplate Kits LFK-T5RL-XX-E 5 Button Engraved Faceplate LFK-T10RL-XX-E 10 Button Engraved Faceplate LFK-T15RL-XX-E 15 Button Engraved Faceplate
Certificado de Grabado Pre-Pagado POR FAVOR NO DESECHAR
Sirve para cambiar por un juego de botón grabado ECA100393
Engraved Button Kits LBK-T5RL-XX-E 5 Button Engraved Button Kit LBK-T10RL-XX-E 10 Button Engraved Button Kit LBK-T15RL-XX-E 15 Button Engraved Button Kit “XX” in the model number represents color / finish code. Specification Submittal Job Name: Job Number:
Model Numbers:
Page
P
R
E
L
I
M
I
N
A
R
Y
RF Keypads
HomeWorksÂŽ
Tabletop Keypads 048-220a 2 07.18.08
Colors and Finishes Keypads and Engraved Button Kits
Engraved Faceplate Kits
Satin Finishes
Satin Finishes
Snow SW
Midnight MN
Snow SW
Midnight MN
Engraved Faceplate Kits Metal Finishes
• Due to printing limitations, colors and finishes shown cannot be guaranteed to perfectly match actual product colors.
When ordering metal faceplates, it is recommended to use a Midnight (MN) keypad.
Specification Submittal Job Name: Job Number:
Model Numbers:
Satin Brass SB
Bright Brass BB
Bright Chrome BC
Clear Anodized Aluminum CLA
Black Anodized Aluminum BLA
Brass Anodized Aluminum BRA
Antique Brass QB
Antique Bronze QZ
Satin Chrome SC
Satin Nickel SN
Bright Nickel BN
Page
P
R
E
L
I
M
I
N
A
R
Y
RF Keypads
HomeWorks®
Tabletop Keypads 048-220a 3 07.18.08
Specifications Standards • UL Listed (Adapter) for U.S. and Canada. • FCC Approved. Complies with the limits for a Class B digital device, persuant to Part 15 of the FCC Rules. • NOM Certified (Adapter). Power • DC Adapter Power: Input Power: 120 V 60 Hz. Output Power: 9 V 300 mA. • Use only the adapter provided by Lutron with the Keypad. • Battery Power: 2 each 1.5 V “AAA” alkaline batteries. Key Design Features • Green LEDs for status and button / engraving backlighting. • Choice of two power sources (plug-in adapter or battery) for maximum flexibility to conveniently locate the Keypad. • Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 6100-4-2.
• Tested to withstand surge voltages without damage or memory loss, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits. • Power failure: should power be interrupted, the lights will return to the level set prior to the interruption. The Large Button Tabletop RF Keypad will continue to identify which lighting zones are active after power is restored. • Configurable backlight intensity: - Separate backlight intensity for battery and adapter power sources - Select between High, Medium, Low, or Off • Configurable “Wake Up” for cordless operation: - “Wake Up and Activate”— Single button press will “wake up” and activate selected button
System Communications and Capacity • RF Keypads communicate with the HomeWorks system through radio frequency (RF). • Each HomeWorks P5 Processor is capable of controlling up to 32 RF Keypads. • RF Tabletop Keypads must be located within 30 feet (9 m) of a Hybrid Repeater or an RF Processor. Multiple Hybrid Repeaters may be necessary to provide adequate coverage. Environment • Ambient operating temperature: 0 °C to 40 °C, 32 °F to 104 °F • 0-90% humidity, non-condensing. • Indoor use only. Warranty • 8-year Limited Warranty. See www.lutron.com/resiinfo for details.
- “ Wake Up Only”—Single button press will “wake up” and show status of lighting
Optional Wall Mounting Attach mounting bracket to wall using the supplied screws and wall anchors.
If using the DC adapter power supply, wrap excess power supply cord around the cord holder. Align RF Tabletop Keypad and snap onto mounting bracket.
Specification Submittal Job Name: Job Number:
Model Numbers:
Page
P
R
E
L
I
M
I
N
A
R
Y
RF Keypads
HomeWorks®
Tabletop Keypads 048-220a 4 07.18.08
Dimensions
Note: All dimensions are in inches (millimeters).
Front View
Side View 1 (25.4)
31⁄4 (82.1)
3/4 (18.3)
39⁄16 (90.7)
Top View Adapter Jack
Mounting Bracket Front View
Mounting Bracket Side View 3/8 (9.4)
31⁄4 (81.3) 5/8 (15)
2 (50.8) 13/16 (21) UP
25⁄16 (59) R = 1/8 (2.3) 215⁄16 (73.9)
3/8 (10)
R = 3/16 (4.8)
5/8 (15)
1 (25.4)
Specification Submittal Job Name: Job Number:
Model Numbers:
Page
P
R
E
L
I
M
I
N
A
R
RF Keypads
HomeWorks®
Y Tabletop Keypads 048-220a 5 07.18.08
System Overview Home A: 2 500 sq. ft. (232 m2) or less - all RF devices within 30 ft. (9 m) of RF Processor RF Tabletop Keypad
RF Dimmer
RF Keypad
System Communication Notes • RF Tabletop Keypads must be located within 30 feet (9 m) of a Hybrid Repeater or an RF Processor. Multiple Hybrid Repeaters may be necessary to provide adequate coverage. • Additional Hybrid Repeaters must be within 60 ft. of the RF Processor or another Hybrid Repeater. • RF Tabletop Keypads will not function until they are addressed and programmed. See the HomeWorks software online help.
30 feet (9 m) maximum
RF Processor (or 4 or 8 Series Processor with Hybrid Repeater)
Home B: 2 500 sq. ft. (232 m2) or greater - some RF devices more than 30 ft. (9 m) from RF Processor RF Tabletop Keypad 30 feet (9 m) maximum
RF Signal Repeater RF Dimmer
RF Keypad RF Processor
60 feet (18 m) maximum between RF Processors and Hybrid Repeaters, or between Hybrid Repeaters
30 feet (9 m) maximum
Specification Submittal Job Name: Job Number:
Model Numbers:
Page