HomeWorks®
WIRED LOCAL DIMMERS
Designer-style: Maestro® 048-012 1a 04.16.03
HomeWorks Wired Maestro Dimmers
DESCRIPTION
Indicator Lights (Dimmer Only) Dimming Rocker
HomeWorks Wired Maestro Dimmers, used in both localized and optimized lighting control designs, function much like standard dimmers, and have an integral microprocessor, allowing them to be incorporated into the whole-house lighting control system. Local dimmers are useful in locations where single circuits of lighting need to be dimmed and local control is desired. HomeWorks Maestro Dimmers incorporate advanced features such as fade on/fade off, long fade to off, and rapid full on. HomeWorks Maestro Dimmers include a Front Accessible Service Switch for safe lamp replacement. All HomeWorks Maestro Dimmers can be installed in either single pole or 3-way applications. HomeWorks Wired Maestro Dimmers may be used with HomeWorks Maestro Remote Dimmers to provide dimming control from up to 9 additional locations.
Tapswitch
FASSTM - Front Accessible Service Switch Dimmer
MODEL NUMBERS Dimmers HWD-6D-XX HWD-6ND-XX HWD-10D-XX HWD-10ND-XX
600 W Incandescent/MLV Dimmer 600 W Incandescent/MLV Neutral Wire Dimmer 1000 W Incandescent/MLV Dimmer 1000 W Incandescent/MLV Neutral Wire Dimmer
Remote Dimmers HD-RD-XX
Remote Dimmer
“XX” in the model number represents color/finish code.
Remote Dimmer
® JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks®
WIRED LOCAL DIMMERS
Designer-style: Maestro® 048-012 2a 04.16.03
• When ON, press and hold to engage long fade to OFF.
S P E C I F I C AT I O N S Regulatory Approvals
• Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached.
• UL Listed. • CSA Certified.
• Use Lutron Designer (Claro® or Satin ColorsTM) wallplates or designer-style wallplates from other manufacturers (when using metal wallplates from other manufacturers, it is recommended that a Midnight (MN) dimmer be used). Wallplates are sold separately.
Power Operating voltage: 120/127VAC, 50/60Hz. Key Design Features • Green indicator lights. • Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 6100-4-2.
• Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment. • Requires a 1-gang U.S. wallbox. 3-1/2 in. (89mm) deep recommended, 2-1/4 in. (57mm) deep minimum.
• Tested to withstand surge voltages without damage or loss of operation,in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
System Communications and Capacity • Dimmers are wired to a HomeWorks Dimmer Hub (HWI-H48). One pair twisted shielded #22-18 AWG (0.5-1.0mm2) Class 2/PELV wiring.
• Dimmers operate locally and do not require system control. • Power failure memory: should power be interrupted, the lights will return to their previously set level prior to the interruption when power is restored.
• Each HomeWorks Dimmer Hub (HWI-H48) is capable of directly controlling up to 48 dimmers. Up to 8 dimmers may be wired to a single bus on the HWI-H48. Refer to Class 2/PELV Wiring.
• Multiple location dimming from Dimmer and up to 9 Remote Dimmer(s).
COLOR / FINISH CODES Dimmer Color
(code)
Designer Gloss Colors White (WH) Ivory (IV) Almond (AL) Light Almond (LA) Gray (GR) Brown (BR) Black (BL) Satin Colors Matte Hot Ochre Terracotta Desert Stone Stone Limestone Blue Mist Midnight Taupe Eggshell Biscuit Snow
Environment
• Uses conventional 3-way and 4-way wiring.
Ambient operating temperature: 0-40°C, 32-104°F, 0-90% humidity, non-condensing. Indoor use only.
• On a single-tap, lights fade ON or OFF. • On a double-tap, lights go to full ON.
Warranty • 8 Year Limited Warranty. MOUNTING Dimmer Mounting Screws
Adapter Mounting Screws
Wallbox Dimmer Wallplate/Adapter purchased separately.
® JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
Finishes (HT) (OC) (TC) (DS) (ST) (LS) (BT) (MN) (TP) (ES) (BI) (SW)
HomeWorks速
WIRED LOCAL DIMMERS
Designer-style: Maestro速 048-012 3a 04.16.03
DIMENSIONS Side View
Front View Dimmer
4-11/16 in. (119mm)
Remote Dimmer
4-11/16 in. (119mm)
2-15/16 in. (75mm)
2-15/16 in. (75mm)
5/16 in. (7.6mm)
1-3/8 in. (34.8mm)
D I M M E R O P E R AT I O N
Indicator Lights (Dimmer only) Indicate light level; glow softly as night light when light is off Tapswitch Tap on/off Dimming Rocker Brighten Dim
OFF
ON
FASSTM Front Accessible Service Switch
IMPORTANT NOTICE: FASS - Front Acessible Service Switch - to replace bulb, remove power by sliding FASS switch to the left on either the Dimmer or Remote Dimmer. After replacing bulb, slide the FASS switch to the right to operate the dimmer.
速 JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks速
WIRED LOCAL DIMMERS
Designer-style: Maestro速 048-012 4a 04.16.03
D I M M E R L OA D T Y P E / C A PAC I T Y HWD-6D
HWD-6ND
HWD-10D
HWD-10ND
Incandescent, Magnetic LowVoltage
Incandescent, Magnetic LowVoltage
Incandescent, Magnetic LowVoltage
Incandescent, Magnetic LowVoltage
50W/VA
10W/VA
50W/VA
10W/VA
INC
600W
600W
1000W
1000W
MLV
600VA (450W)
600VA (450W)
1000VA (800W)
1000VA (800W)
ELV
N/A
N/A
N/A
N/A
NO
YES
NO
YES
L OA D T Y P E
M I N I M U M L OA D
MAXIMUM C A PAC I T Y
NEUTRAL WIRE
GA N G I N G A N D D E R AT I N G When ganging dimmers with other dimmers or controls in the same wallbox, derating is required.
END of Gang
MIDDLE of Gang
For multi-gang installations, derate load capacities as follows: E n d of G a n g Incandescent
Model No.
500W 500W 800W 800W
HWD-6D HWD-6ND HWD-10D HWD-10ND
速 JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
M LV 500VA (375W) 500VA (375W) 800VA (650W) 800VA (650W)
M i d d l e of G a n g Incandescent 400W 400W 650W 650W
M LV 400VA 400VA 650VA 650VA
(300W) (300W) (500W) (500W)
Page
HomeWorks®
WIRED LOCAL DIMMERS
Designer-style: Maestro® 048-012 5a 04.16.03
WIRING DIAGRAMS Single Location Installation -6D, -10D
To HomeWorks Dimmer Hub (H48) or next Maestro Dimmer/Switch
Single Location Installation with Neutral -6ND, -10ND, -8ANS Dimmer/S witch
Dimmer Hot/Live
Black
Red
Hot/Live
Black
Blue
Red Blue
Lighting Load
Cap Off*
120/127VAC 50/60Hz
To HomeWorks Dimmer Hub (H48) or next Maestro Dimmer/Switch
Green
Lighting Load
Cap Off*
120/127VAC 50/60Hz Green
White Neutral
Neutral
*When using controls in single location installations, cut off the uninsulated portion of the control’s multi-location wire (blue wire) and cap off using one of the provided wire connectors. DO NOT connect the blue wire to any other wiring or to ground.
Multi-Location Installation1 -6D, -10D with HD-RD
To HomeWorks Dimmer Hub (H48) or next Maestro Dimmer/Switch
Hot
Black
Red
Remote Dimmer
Dimmer
Remote Dimmer Black
Red
Black
Red
Lighting Load 120/127VAC 50/60Hz
Green
Blue
Green
Blue
Green
Blue
Neutral
Multi-Location Installation with Neutral1, 2 -6ND, -10ND, with HD-RD, -8ANS with HD-RS Remote Dimmer/Switch Hot
Black
Red
Black
Red
To HomeWorks Dimmer Hub (H48) or next Maestro Dimmer/Switch
Dimmer/ Switch
Remote Dimmer/Switch
Black
Red
Lighting Load 120/127VAC 50/60Hz
Green
Blue
Green
Blue
Green
Blue
White Neutral
1 Up to 9 HomeWorks Maestro Remote Dimmers/Switches may be connected to the HomeWorks Wired Maestro Dimmer/Switch. Total blue wire length may be up to 250 ft. (76m).
2 Neutral wire Dimmers/Switches must be connected on the Lighting Load side of a multi-location installation.
® JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks速
WIRED LOCAL DIMMERS
Designer-style: Maestro速 048-012 6a 04.16.03
C L A S S 2 / P E LV W I R I N G Dimmer Side View
Dimmer communications wiring may be in a daisy-chain, star, or t-tap configuration. Each home run on a bus may be up to 500 ft. (152m) and may contain up to 8 devices. The total length of wire on each bus (all home runs) may be up to 1000 ft. (305m). Up to 48 HomeWorks Wired Maestro Dimmers or Switches may be wired to the HomeWorks Dimmer Hub (HWI-H48). Up to four HWI-H48s may be placed on each processor link configured as an H48 link in the HomeWorks Utility.
Class 2/PELV wiring to HomeWorks Dimmer Hub or other HomeWorks Wired Maestro devices. Butt Splices Drywall Wallbox
Dimmer Backcover C L A S S 2 / P E LV W I R E T Y P E One pair #22-18 AWG (0.5 - 1.0mm2) twisted, shielded Class 2/PELV. HWI-H48 Dimmer Hub
Gray
Violet
Gray
Violet
Gray
Violet
Up to 8 dimmer or switch devices may be wired to each bus on the H48.
1 pair #22-18 AWG (0.5mm-1.0mm2) twisted, shielded Class 2/PELV Maximum 500 ft. (152m) per home run, maximum 1000 ft. (305m) total per bus (Non-polarized)
Violet Gray
速 JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page