HomeWorks®
WIRED LOCAL SWITCHES
Designer-style: Maestro® 048-034b 1 10.31.05
HomeWorks Wired Maestro Switches
DESCRIPTION
Indicator Light (Switch Only)
HomeWorks Wired Maestro Switches, used in both localized and optimized lighting control designs, function much like standard switches, and have an integral microprocessor, allowing them to be incorporated into the whole-house lighting control system. Local Switches are useful in locations where single circuits of lighting need to be switched. HomeWorks Maestro Switches include a Front Accessible Service Switch for safe lamp replacement. All HomeWorks Maestro Switches can be installed in either single pole or 3way applications. HomeWorks Maestro Switches may be used with HomeWorks Maestro Remote Switches to provide control from up to 9 additional locations.
Tapswitch
FASSTM - Front Accessible Service Switch MODEL NUMBERS Switch Switches HWD-8ANS-XX 8A Neutral Wire Switch Remote Switches HD-RS-XX
Remote Switch
“XX” in the model number represents color/finish code.
Remote Switch
® JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks®
WIRED LOCAL SWITCHES
Designer-style: Maestro® 048-034b 2 10.31.05
• Use Lutron Designer (Claro® or Satin ColorsTM) or designer-style wallplates from other manufacturers (when using metal wallplates from other manufacturers, it is recommended that a Midnight (MN) switch be used). Wallplates are sold separately.
S P E C I F I C AT I O N S Regulatory Approvals • UL Listed. • CSA Certified. Power Operating voltage: 120/127VAC, 50/60Hz.
• Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment.
Key Design Features
• Requires a 1-gang U.S. wallbox. 31/2 in. (89mm) deep recommended, 2-1/4 in. (57mm) deep minimum.
• Green indicator light. • Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 6100-42. • Tested to withstand surge voltages without damage or loss of operation,in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits. • Switches operate locally and do not require system control. • Power failure memory: should power be interrupted, the lights will return to their previously set status prior to the interruption. • Multiple location switching from Switch and up to 9 Remote Switches.
System Communications and Capacity • Switches are wired to a HomeWorks Dimmer Hub (HWI-H48). One pair twisted shielded #22-18 AWG (0.51.0mm2) Class 2/PELV wiring. • Each HomeWorks Dimmer Hub (HWIH48) is capable of controlling up to 48 dimmers or switches. Up to 8 dimmers or switches may be wired to a single bus on the HWI-H48. Refer to Class 2/PELV Wiring. Environment
COLOR / FINISH CODES Switch Color
(code)
Designer Gloss Colors White (WH) Ivory (IV) Almond (AL) Light Almond (LA) Gray (GR) Brown (BR) Black (BL) Satin Colors Matte Finishes Hot (HT) Ochre (OC) Terracotta (TC) Desert Stone (DS) Stone (ST) Limestone (LS) Blue Mist (BT) Midnight (MN) Taupe (TP) Eggshell (ES) Biscuit (BI) Snow (SW)
Ambient operating temperature: 0-40°C, 32-104°F, 0-90% humidity, non-condensing. Indoor use only. Warranty
• Uses conventional 3-way and 4-way wiring. MOUNTING
• 8 Year Limited Warranty.
Switch Mounting Screws
Adapter Mounting Screws
Wallbox Switch Wallplate/Adapter purchased separately.
® JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks速
WIRED LOCAL SWITCHES
Designer-style: Maestro速 048-034b 3 10.31.05
DIMENSIONS Side View
Front View Switch
Remote Switch
4-11/16 in. (119mm)
4-11/16 in. (119mm)
2-15/16 in. (75mm)
2-15/16 in. (75mm)
5/16 in. (7.6mm)
1-3/8 in. (34.8mm)
S W I T C H O P E R AT I O N
Indicator Light (Switch only) Indicates light status; glows brightly when switch is on, softly as night light when switch is off
Tapswitch Tap on/off
OFF
ON
FASSTM Front Accessible Service Switch
IMPORTANT NOTICE: FASS - Front Acessible Service Switch - to replace bulb, remove power by sliding FASS switch to the left on either the Switch or Remote Switch. After replacing bulb, slide the FASS switch to the right to operate the switch.
速 JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks速
WIRED LOCAL SWITCHES
Designer-style: Maestro速 048-034b 4 10.31.05
*The HWD-8ANS Switch is UL Listed for use with all magnetic fluorescent ballasts and the electronic fluorescent ballasts listed below.
S W I T C H L O A D T Y P E / C A PA C I T Y HWD-8ANS LOAD TYPE
I n c a n d e s c e n t , M LV, E LV, H i g h I n t e n s i t y D i s c h a rg e ( H I D ) , M a g n e t i c F l u o re s c e n t , E l e c t ro n i c F l u o re s c e n t *
MIN. LOAD
1 0 W / VA
MAXIMUM C A PA C I T Y
8A
NEUTRAL WIRE
YES
Manufacturer Advance Transformer Co. Valmont Electric Sylvania
GE/Motorola Lighting Magnetek Sunpark
Model Number REL-2P32-RH-TP, ICF-2S42-M2-LD E232PI120G01 QT3X32/120IS, QTP2X32T8/UNC ISN-SC, QTP2X26/34/43CF/UNV BM G2-RN-T8-1LL-120 B232I120RH SL15
G A N G I N G A N D D E R AT I N G When ganging switches with other switches or controls in the same wallbox, derating is required.
END of Gang
MIDDLE of Gang
For multi-gang installations, derate load capacities as follows:
Model No.
End of Gang
Middle of Gang
HWD-8ANS
6.5A
5A
速 JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks®
WIRED LOCAL SWITCHES
Designer-style: Maestro® 048-034b 5 10.31.05
WIRING DIAGRAMS Single Location Installation HWD-8ANS
}
Violet To HomeWorks Dimmer Hub (HWIGray H48) or Next Maestro Dimmer/Switch
Switch Hot
Black
Red Blue Cap Off*
120/127VAC 50/60Hz Green
Lighting Load
White
Neutral *
When using controls in single location installations, cut off the uninsulated portion of the control’s multi-location wire (blue wire) and cap off using one of the provided wire connectors. DO NOT connect the blue wire to any other wiring or to ground.
Multi-Location Installation1,2 HWD-8ANS with HD-RS Violet Gray
Hot
Remote Switch Red Black
120/127VAC Green 50/60Hz
Blue
Remote Switch Red Black
Green
Blue
Remote Switch Red Black
Green
Blue
Switch Black
Green
Red
Blue
}
To HomeWorks Dimmer Hub (HWIH48) or Next Maestro Dimmer/ Switch
Lighting Load
White Neutral
1 Up to 9 HomeWorks Maestro Remote Dimmers/Switches may be connected to the HomeWorks Wired Maestro Dimmer/Switch. Total blue wire length may be up to 250 ft. (76m).
2 Neutral wire Dimmers/Switches must be connected on the Lighting Load side of a multi-location installation.
® JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks速
WIRED LOCAL SWITCHES
Designer-style: Maestro速 048-034b 6 10.31.05
C L A S S 2 / P E LV Switch Side View Switch communications wiring may be in a daisy-chain, star, or t-tap configuration. Each home run on a bus may be up to 500 ft. (152m) and may contain up to 8 devices. The total length of wire on each bus (all home runs) may be up to 1000 ft. (305m). Up to 48 dimmer or switch devices may be wired to the HomeWorks Dimmer Hub (HWIH48). Up to four HWI-H48s may be placed on each processor link configured as an H48 link in the HomeWorks Utility.
Class 2/PELV wiring to HomeWorks Dimmer Hub or other switch or dimmer devices. Butt Splices Drywall Wallbox
Switch Backcover C L A S S 2 / P E LV W I R E T Y P E One pair #22-18 AWG (0.5 - 1.0mm2) twisted, shielded Class 2/PELV. HWI-H48 Dimmer Hub
Gray
Violet
Up to 8 dimmer or switch devices may be wired to each bus on the H48.
1 pair #22-18 AWG (0.5mm-1.0mm2) Maximum 500 ft. (152m) per home run, maximum 1000 ft. (305m) total per bus (Non-polarized)
Violet Gray
速 JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page