Product Identifier: ELECTRATE
DIN #: 00641596
MATERIAL SAFETY DATA SHEET SECTION 1 – PRODUCT IDENTIFICATION AND USE MANUFACTURER’S NAME:
BIMEDA-MTC ANIMAL HEALTH INC.
SUPPLIER’S NAME:
BIMEDA-MTC ANIMAL HEALTH INC.
STREET ADDRESS:
420 BEAVERDALE ROAD
STREET ADDRESS:
420 BEAVERDALE ROAD
CITY AND PROVINCE:
CAMBRIDGE, ONTARIO
CITY AND PROVINCE:
CAMBRIDGE, ONTARIO
POSTAL CODE:
N3C 2W4
POSTAL CODE:
N3C 2W4
TELEPHONE #
519-654-8000
TELEPHONE #
519-654-8000
EMERGENCY RESPONSE:
CHEMTREC
TELEPHONE #
1-800-424-9300
PRODUCT CODE #:
1ELE003P – 1L
PRODUCT USE:
Used as fluid replacement for large and small animals
WHMIS CLASSIFICATION:
Exempt
SECTION 2 – HAZARDOUS INGREDIENTS HAZARDOUS INGREDIENTS
APPROX CONC %
EXPOSURE LIMITS
C.A.S. #
LD50
Sodium Chloride Magnesium Chloride Sodium Acetate Potassium Acetate
6.62% 0.35% 4.04% 2.21%
None None None None
7647-14-5 7791-18-6 6131-90-4 127-08-2
Rat, Oral 3.75 g/kg Rat, Oral 8100 mg/kg Rat, Oral 3.5 g/kg Rat, Oral 3250 mg/kg
SECTION 3 – PHYSICAL DATA PHYSICAL STATE:
PRODUCT DESCRIPTION:
Liquid
Pale yellow viscous liquid
pH:
SPECIFIC GRAVITY:
6.9 – 7.9
Approximately 1.3
SOLUBILITY IN H2O:
BOILING POINT:
Completely soluble
n. est.
VAPOUR PRESSURE:
VAPOUR DENSITY:
n. est.
n. est.
ODOUR THRESHOLD:
REACTIVITY:
n. est.
Hazardous polymerization will not occur.
CHEMICAL STABILITY:
CHEMICAL INCOMPATIBILITY:
Normally Stable
Acids, Oxidizing agents, Nitric Acid, Fluoride, Diketene
HAZARDOUS DECOMPOSITION PRODUCTS:
Carbon Dioxide, Carbon Monoxide, Fumes of Chlorides, Oxides of Sodium, Acetic Acid.
Page 1 of 3
Product Identifier: ELECTRATE
DIN #: 00641596
SECTION 4 – FIRE AND EXPLOSION DATA FLAMMABILITY:
FLASH POINT (DEG C TCC):
Not Flammable
n. est.
LOWER EXPLOSIVE LIMIT (% VOL) COMPONENT:
UPPER EXPLOSIVE LIMIT (% VOL) COMPONENT:
n. est.
n. est.
HAZARDOUS COMBUSTION PRODUCTS:
MEANS OF EXTINCTION:
See above.
Suitable for surrounding fire.
SPECIAL PROCEDURES:
AUTO IGNITION TEMP:
Wear full protective equipment including a self-contained breathing apparatus.
n/a
SENSITIVITY TO IMPACT:
RATE OF BURNING:
None
n. est.
SENSITIVITY TO STATIC:
No
SECTION 5 – TOXICOLOGICAL PROPERTIES ROUTE OF ENTRY:
Eye: Yes Ingestion: Yes
Skin Contact: No Inhalation: No
Skin Absorption: No
EFFECTS OF ACUTE EXPOSURE TO MATERIAL:
May cause skin irritation. May cause eye irritation. EFFECTS OF CHRONIC EXPOSURE:
No specific information available. IRRITANCY OF PRODUCT:
See above. SENSITIZATION TO PRODUCT:
None known. CARCINOGENICITY OF PRODUCT:
None REPRODUCTIVE EFFECTS:
None
SECTION 6 – PREVENTATIVE MEASURES GLOVES:
Chemical resistant gloves. Under normal conditions of use not normally required. RESPIRATOR:
Not required. EYE:
Chemical safety goggles. Do not wear contact lenses. Under normal conditions of use not normally required. FOOTWEAR:
Safety Shoes. Under normal conditions of use not normally required. CLOTHING:
Protective clothing. Under normal conditions of use not normally required. ENGINEERING CONTROLS: General ventilation.
Page 2 of 3
Product Identifier: ELECTRATE
DIN #: 00641596
SECTION 7 – FIRST AID MEASURES INGESTION:
Drink two glasses of warm water. Induce vomiting. Do not give anything to an unconscious victim. Seek medical attention. INHALATION:
Remove victim from exposure. Monitor respiration. Possible pulmonary edema. Seek medical attention. SKIN CONTACT:
Flush with water for 15 minutes. If irritation persists seek medical advice. EYE CONTACT:
Flush with lukewarm water for 20 minutes. Seek medical attention.
SECTION 8 – STORAGE AND HANDLING STORAGE CONDITIONS:
Store in closed container. SPILL PROCEDURE:
Wear protective equipment. Contain spill. DISPOSAL:
Dispose of in accordance with local, provincial and federal regulations.
SECTION 9 – ADDITIONAL INFORMATION TDG SHIPPING INFORMATION:
Not regulated. PCP REGISTRATION:
Not applicable. OTHER INFORMATION:
Use strictly as directed.
SECTION 10 – PREPARATION DATA DATE: DATE REVISED:
October 2010
TELEPHONE NUMBER:
519-654-8000
Information for this material safety data sheet was obtained from sources considered technically accurate and reliable. While every effort has been made to ensure full disclosure of product hazards, in some cases data is not available and is so stated. Since conditions of actual product use are beyond the control of the supplier, it is assumed that user of this material has been fully trained according to the mandatory requirements of WHMIS. No warranty, expressed or implied, is made and supplier will not be liable for any losses, injuries or consequential damages which may result from the use of or reliance on any information contained in this form. If user requires independent information on ingredients in this or any other material, we recommend contact supplier.
Page 3 of 3