Product Identifier: ROUTEEN®
DIN #: 02233142
MATERIAL SAFETY DATA SHEET SECTION 1 – PRODUCT IDENTIFICATION AND USE MANUFACTURER’S NAME:
BIMEDA-MTC ANIMAL HEALTH INC.
SUPPLIER’S NAME:
BIMEDA-MTC ANIMAL HEALTH INC.
STREET ADDRESS:
420 BEAVERDALE ROAD
STREET ADDRESS:
420 BEAVERDALE ROAD
CITY AND PROVINCE:
CAMBRIDGE, ONTARIO
CITY AND PROVINCE:
CAMBRIDGE, ONTARIO
POSTAL CODE:
N3C 2W4
POSTAL CODE:
N3C 2W4
TELEPHONE #
519-654-8000
TELEPHONE #
519-654-8000
EMERGENCY RESPONSE:
CHEMTREC
TELEPHONE #
1-800-424-9300
CHEMICAL NAME:
CHEMICAL FAMILY:
PRODUCT CODE: 1ROU001P
CHEMICAL FORMULA: PRODUCE SIZE:
1ROU002
125 mL 350 mL
SECTION 2 – COMPOSITION/INFORMATION ON INGREDIENTS INGREDIENTS
% (W/W)
CAS NUMBER
PRODUCT IDENTIFICATION NUMBER (PIN)
Malic Acid Less than 5 617-48-1 Benzoic Acid Less than 1 65-85-0 Salicylic Acid Less than 1 69-72-7 Propylene Glycol Less than 50 57-55-6 Trade Secret Ingredients More than 55 Unassigned CONTAMINANTS: No significant hazardous contaminants. ROUTE OF ENTRY: Avoid breathing mist or vapour, eye contact, skin contact, ingestion. Skin Contact: Irritation might occur following direct contact with this material. Symptoms might include itching, redness, swelling or pain. Skin Absorption: ( ) Eye Contact: Irritation might occur following direct contact with this material. Symptoms might include redness, swelling, blurred vision or pain. Inhalation: Effects of breathing mist or vapour are not known. Avoid inhaling this material. Ingestion: Toxicity following ingestion is not expected. However, ingestion should be avoided. CONDITIONS AGGRAVATED BY EXPOSURE:
Individuals with impaired renal function or skin disorders might be sensitive to the effects of one component, propylene glycol. EXPOSURE CONTROLS:
Benzoic Acid: United States *ACGIH): 0.1 mg/m3 ACGIH TWA United States (OSHA): 0.1 mg/m3 OSHA TWA (Skin) Other: 0.1 MG/M# NIOSH RECOMMENDED TWA (SKIN) 0.3 MG/M3 NIOSH RECOMMENDED STEL 0.1 MG/M3 DFG MAK TWA (TOTAL DUST) (SKIN) 0.2 MG/M3 DFG MAK 5 MINUTE PEAK, MOMENTARY VALUE, 8 TIMES/SHIFT INDUSTRIAL HYGIENE METHOD: Particulate filter; methanol/water; high-pressure liquid chromatography with ultraviolet detection; (NIOSH Vol. II (4) # S228).
Page 1 of 5
Product Identifier: ROUTEEN®
DIN #: 02233142
EXPOSURE CONTROLS (CONTINUED):
Propylene Glycol: United States (ACGIH): 350 ppm (1910 mg/m3) ACGIH TWA 450 ppm (2460 mg/m3) ACGIH STEL United States (OSHA): 350 ppm (1910 mg/m3) OSHA TWA 450 ppm (2460 mg/m3) OSHA STEL Other: 50 PPM AIHA RECOMMENDED TWA 10 MG/M3 AIHA RECOMMENDED TWA (AEROSOL ONLY) INDUSTRIAL HYGIENE METHOD: Charcoal tube; carbon disulfide; gas chromatography with flame ionization detection: (NIOSH Vol. III #1003, Halogenated Hydrocarbons).
SECTION 3 – PHYSICAL DATA PHYSICAL STATE:
ODOUR AND APPEARANCE:
ODOUR THRESHOLD (ppm):
Clear, colourless liquid with menthol/citronella fragrance. VAPOUR PRESSURE (mm Hg):
VAPOUR DENSITY (Air = 1):
EVAPORATION RATE (Ether = 1):
Expected to be negligible.
Expected to be negligible.
Expected to be negligible.
BOILING POINT (DEG.C):
MELTING POINT (DEG. C):
VOLATILE COMPONENTS (%):
Expected to boil at approximately 100 degrees C.
Expected to melt at approximately 0 degrees C.
56
VISCOSITY:
RELATIVE DENSITY:
CONDUCTIVITY:
OCTANOL/WATER DISTRIBUTION COEFFICIENT:
Not determined.
Approximately 1 (water = 1).
Not determined.
Not determined.
Ph OF AQUEOUS SOLUTIONS:
DISSOCIATION CONSTANT (pKA):
SOLUBIITY IN WATER:
OXYGEN BALANCE:
Active ingredients are formulated to a low 2.3 pH.
Not determined.
Components are soluble in water.
Not applicable for mixtures.
TRAIN FIRE TEST:
DUST EXPLOSIVITY:
DUST ELECTRICAL PROPERTIES:
Not applicable for liquid mixtures.
Not applicable for liquid mixtures.
Not applicable for liquid mixtures.
SECTION 4 – FIRE AND EXPLOSION DATA FLAMMABLE: This mixture is non-flammable. IF YES, UNDER WHICH CONDITIONS: SPECIAL PROCEDURES: Self contained breathing apparatus and full protective equipment are recommended for
firefighters. Move containers from fire area if possible without increased personal risk. Dike area if possible to contain water for later disposal. Toxic or corrosive gases are expected in fires involving this mixture. FLASHPOINT (Deg. C) AND METHOD:
UPPER FLAMMABLE LIMIT (% BY VOLUME):
LOWER FLAMMABLE LIMIT (% BY VOLUME):
Non flammable
Not applicable
Not applicable
AUTOIGNITION TEMPERATURE (DEG. C):
HAZARDOUS COMBUSTION PRODUCTS:
Not applicable SENSITIVITY TO IMPACT:
SENSITIVITY TO STATIC DISCHARGE:
Page 2 of 5
Product Identifier: ROUTEEN®
DIN #: 02233142
SECTION 5 – REACTIVITY DATA STABILITY AND REACTIVITY: CONDITIONS TO AVOID: Avoid direct sunlight, conditions that might generate heat and temperatures below 0 degrees C. INCOMPATIBILITY: None identified. STABILITY: This material is expected to be stable. THERMAL STABILITY: This material is expected to be stable. HAZARDOUS POLYMERIZATION: Not expected to occur. HAZARDOUS DECOMPOSITION PRODUCTS: None under normal conditions. FIRE AND EXPLOSION HAZARDS: None, this material is non-flammable.
SECTION 6 – TOXICOLOGICAL PROPERTIES ORAL TOXICITY: Not determined for this mixture. The calculated oral LD50 is greater than 2000 mg/kg in rates, based on
toxicities of individual components. INHALATION TOXICITY: Not determined for this mixture. However, adverse effects from inhalation would not be expected
based on effects of individual components. SKIN IRRITATION: Not determined for this mixture. However, irritation might occur based on effects of individual components. EYE IRRITATION: Not determined for this mixture. However, irritation might occur based on effects of individual components. SENSITIZATION: Sensitization (allergic skin reaction) is not expected, based on effects of individual components. NUTAGENICITY: Not determined for this mixture. CARCINOGENICITY: No components in this mixture are listed as carcinogens by SB, IARC, NTP or U.S. OSHA. REPRODUCTIVE EFFECTS: Not determined for this mixture. OTHER EFFECTS: None known for this mixture.
SECTION 7 – PREVENTATIVE MEASURES PERSONAL PROTECTIVE EQUIPMENT: GLOVES (Specify):
RESPIRATOR (Specify):
EYES (Specify):
War impervious gloves to avoid routine skin contact.
Respirators are not required for the normal use of this material.
Wear safety glasses if eye contact is possible.
HYGIENE PRACTICES:
CLOTHING (Specify):
Wash hands and arms thoroughly after handling this material. Clean up spills immediately.
OTHER PROTECTIVE EQUIPMENT:
None required with normal use of this material. Wear protective clothing with long sleeves when working with large quantities.
ENGINEERING CONTROLS: LEAK AND SPILL PROCEDURES: No special procedures required for small spills. For large spills, wear protective clothing;
spread a suitable inert absorbent on the spillage, then carefully scoop up the spillage and place in a suitable container for recovery or disposal. Wash down spillage area with copious amounts of water. Do not allow this material to enter surface drainage systems. DECONTAMINATION PROCEDURES: Water can be used for clean-up and decontamination operations. No specific detoxification procedures have been identified for this substance. WASTE DISPOSAL: HANDLING: No special requirements for the normal use of this material. STORAGE: Keep in tightly sealed containers in a cool, dry, well-ventilated area away from food or containers of feed. Do
not re-use containers. Avoid freezing conditions.
Page 3 of 5
Product Identifier: ROUTEEN®
DIN #: 02233142
SECTION 8 – FIRST AID MEASURES EYES: NOTE TO PHYSICIAN: SKIN: NOTE TO PHYSICIAN: INHALATION:
NOTE TO PHYSICIAN: INGESTION: NOTE TO PHYSICIAN: ANTIFOTES:
Flush eyes continuously with water for at least 15 minutes and obtain immediate medical attention. Consider further flushing of eyes with large amounts of water or saline. Wash hands and arms thoroughly after handling this material. Obtain medical assistance if skin effects occur. None. General procedures for inhalation overexposures are as follows. Move exposed subject to fresh air and seek medical assistance. IF BREATHING HAS STOPPED, START BASIC LIFE SUPPORT AND SEEK IMMEDITE MEDICAL ASSISTANCE. For combustion products, refer to section number 5. In the event of swallowing this material, seek immediate medical attention. DO NOT INDUCE VOMITING. This material is not a corrosive agent. None known.
SECTION 9 – ECOLOGICAL INFORMATION ACUTE AQUATIC EFFECTS: Not determined for this mixture. BIODEGRADATION: Not determined for this mixture. ACTIVATED SLUDGE RESPIRATION INHIBITION (OECD 209 PROTOCOL): Not determined for this mixture. SOIL ABSORPTION: Not determined for this mixture. OTHER EFFECTS: Not determined for this mixture.
SECTION 10 – DISPOSAL CONSIDERATIONS Collect for recycling or recovery, if possible. Observe all local and national regulations when disposing of this mixture.
SECTION 11 – TRANSPORT INFORMATION FOR AIR TRANSPORT (IATA REQUIREMENTS0: NOT RESTRICTED (Non-hazardous according to IATA criteria). FOR MARITIME TRANSPORT (IMDG REQUIREMENTS): NOT RESTRICTED (Non-hazardous according to IMDG criteria). FOR UNITED STATES GROUND TRANSPORT (DOT REQUIREMENTS): NOT RESTRICTED (Non-hazardous according to
US DOT criteria). FOR EUROPEAN GROUND TRANSPORT (ADR/RID/ROAD/RAIL REQUIREMENTS): Not determined. Hazards according to
ADR/RID requirements not identified. EMERGENCY INFORMATION: HAZCHEM CODE: Not applicable. TREMCARD NUMBER: Not applicable.
SECTION 12 – REGULATORY INFORMATION EUROPEAN UNION CLASSIFICATION AND LABELLING REQUIREMENTS: No European Union labelling requirements.
SECTION 13 – OTHER INFORMATION HAZARD LABEL: **** NO FIRE HAZARD IDENTIFIED **** **** NO HEALTH HAZARD IDENTIFIED **** ** TARGET ORGAN – NO SPECIFIC TARGET ORGAN EFFECTS KNOWN. ** SYMBOL: NOT REQUIRED REFERENCES: SB HAZARD DETERMINATION
Page 4 of 5
Product Identifier: ROUTEENÂŽ
DIN #: 02233142
SECTION 14 – PREPARATION DATA DATE: DATE UPDATED:
TELEPHONE NUMBER:
519-654-8000
August 2002, June 2008, August 2009, August 2010
Information for this material safety data sheet was obtained from sources considered technically accurate and reliable. While every effort has been made to ensure full disclosure of product hazards, in some cases data is not available and is so stated. Since conditions of actual product use are beyond the control of the supplier, it is assumed that user of this material has been fully trained according to the mandatory requirements of WHMIS. No warranty, expressed or implied, is made and supplier will not be liable for any losses, injuries or consequential damages which may result from the use of or reliance on any information contained in this form. If user requires independent information on ingredients in this or any other material, we recommend contact supplier.
Page 5 of 5