everything for the lab Biotech AB – your single provider of HPLC and fluidic scientific customized parts & assemblies
New High Flow Degasser
2
For ordering & informtion – Telephone +46 (0)300-56 91 80. Fax +46 (0)300-56 91 81. www.biotech.se
Product Advance Sheet
Systec
®
High-Flow Degasser
IDEX Health & Science’s Systec® High-Flow Degasser is a non-porus, air-permeable membrane activated by a controlled vacuum source capable of removing dissolved air from liquids at a rate of up to one liter per minute in OEM instruments. The High-Flow Degasser is designed to degas liquids in high-throughput applications such as clinical chemistry analyzers to prevent bubble formation and improve dispense precision. Accommodating a broad range of fluids including aqueous salts, organics, detergents, and sterilizing agents, the High-Flow Degasser incorporates the longest-life pump available on the market with membrane materials chosen to reduce maintenance and provide the lowest total cost of ownership.
TECHNICAL DATA Part Number
Dispense Precision, Long Life
Operational flow rate (mL/min)
Removes dissolved gases and bubbles from fluidic lines to improve dispense precision ff Longest lifetime pump and membrane materials are selected to reduce maintenance and provide best TCO ff Compatible with broad range of fluids including aqueous salts, organics, detergents and sterilizing agents (pH range: 2–13) ff Highest efficiency membrane reduces unit size, which increases available benchtop space ff Tested and calibrated assembly is ready for installation ff
Pressure Drop (@ 20 °C & Max Flow) Internal Volume Degassing Efficiency (Removed O2% in DI Water @ Max Flow)
Number of Channels Wetted Materials External Fluidic Ports Maximum Operating Pressure: Maximum Temperature
0001-6706 0 - 1,000 < 15 kPa < < 45 mL > 50% 1 Polysulfone, silicone rubber, polypropylene, Tygon S-50-HL, medical grade adhesives 3/16 inch (4.8 mm) ID Barb Fittings < 2 Barg 40 °C
Biotech AB Box 133, 439 23 Onsala, Sweden TEL: +46 300 569180 FAX: + 46 300 569181 E-mail: info@biotech.se URL: www.biotech.se Eastern Plastics
I Innovadyne I Ismatec I Isolation Technologies I Rheodyne I Sapphire Engineering I Systec I Upchurch Scientific
Product Advance Sheet
Systec High-Flow Degasser 6.1” 155 mm
6.1” 155 mm
8.4” 212 mm
4.1” 105 mm
4.1” 105 mm
3.9” 100 mm
3.9” 100 mm
8.4” 212 mm 4.1” 4.1” 105 mm105 mm 6.1” 6.1” 155 mm155 mm
3.9” 3.9” 100 mm100 mm
8.4” 8.4” 212 mm212 mm
EXHAUST: 1/8" ID TUBE EXHAUST: 1/8" ID TUBE CONNECTION [ 3.2 mm ] [ 3.2 mm ] CONNECTION 3/16" ID TUBE 3/16" ID TUBE CONNECTION [ 4.8 mm ] [ 4.8 mm ] CONNECTION
1.25” 1.25” 31.8 mm Control 31.8 mm Pump
6.0” 152 mm
6.0” 152 mm
3.5”
3.5” 89 mm
89 mm Specifications
EXHAUST: 1/8" ID 1/8" TUBEID TUBE EXHAUST: CONNECTION [ 3.2 mm[ 3.2 ] mm ] CONNECTION 3/16" ID3/16" TUBEID TUBE CONNECTION [ 4.8 mm[ 4.8 ] mm ] CONNECTION
Power Requirements
24 VDC at 0.85 amp max. (0.5 amp typical)
International Power Adapter Included 1.1” 1.1”
AC adapter: 100–240 V AC, 1A, 50–60 Hz (for North America, UK, continental Europe, Japan, Australia)
Vacuum Sensor Calibration Accuracy
±5 mm Hg absolute over an ambient operating temperature range of 10–35 °C (NIST traceable)
Closed-Loop Control Setpoint
120 mm Hg absolute (pump runs at high rpm until near setpoint, then speed is varied to maintain a value of 120 mm Hg absolute — load independent)
27 mm
27 mm
Green - Blinking LED Indicators Single Bi-Color
Errors Detected
Green - Solid Amber - Blinking
Vacuum reaches upper control range Vacuum reaches 8.3” control set point 211 mm Power on, vacuum operating normally
Amber - Solid
Error condition, shutdown
1 - Pumpdown
Unable to reach 120 mm Hg (16 kPa) in 10 minutes
2 - High Vacuum
Vacuum > 200 mm Hg (26.7 kPa) for > 10 minutes
3 - Sensor Signal
Sensor > 800 mm Hg (106.7 kPa) or < 10 mm Hg (1.3 kPa)
Biotech AB Box 133, 439 23 Onsala, Sweden TEL: +46 300 569180 FAX: + 46 300 569181 E-mail: info@biotech.se URL: www.biotech.se
6.0” 6.0” 152 mm152 mm 1.25” 1.25” 31.8 mm31.8 mm
3.5” 3.5” 89 mm 89 mm
1.1” 1.1” 27 mm 27 mm
7.5” 7.5” 191 mm191 mm
7.5” 191 mm
7.5” 191 mm
8.3” 8.3” 211 mm211 mm
8.3” 211 mm
Internal structure
Tygon® is a registered trademark of Saint-Gobain Performance Plastics Corporation Teflon® is a registered trademark of E.I. du Pont de Nemours and Company, used under license by Upchurch Scientific. Only DuPont makes Teflon®. Systec® is a registered trademark of IDEX Health & Science LLC ©2011 IDEX Health & Science LLC IDX1353-PS-HS/6.2011
www.idex-hs.com I North/South America +1 866 339 4653 I Europe +49 1801 808 800 I Asia +86 10 6566 9090
Eastern Plastics
I Innovadyne I Ismatec I Isolation Technologies I Rheodyne I Sapphire Engineering I Systec I Upchurch Scientific
view from our office windows
bioteCh Biotech Sweden is a company highly specialized in chromatography accessories and consumables. Biotech is located on the Swedish Westcoast – south of Gothenburg – at the beautiful Onsala peninsula, covering 15.000 sq.m. land and 700 sq.m. production and office area.
Affiliated companies: Biotech USA LLC 281 County Road C2W, Roseville MN 55113, USA mstorkamp@biotechusa.us Biotech India Pvt Ltd Mumbai 400-099, India Banking Reference:
a simple philosophy... We at Biotech believe that value is not ”the lowest price” – our customers are the reason we exist – our customers always come
Handelsbanken Kungsbacka Branch, Sweden Fax +46 300 334 29
We accept visa® and masterCard® - no minimum order.
first. We have not lost sight where we come from and therefore we try harder to be your partner, we’re not satisfied unless you are satisfied. Thank you for your business. I know we’ll continue to grow and prosper together.
Biotech AB. P.O. Box 133, SE-439 23 Onsala, Sweden. Telephone +46 (0)300-56 91 80. Fax +46 (0)300-56 91 81 info@biotech.se – www.biotech.se
2
For ordering & informtion – Telephone +46 (0)300-56 91 80. Fax +46 (0)300-56 91 81. www.biotech.se